| /* Optimized memrchr implementation for PowerPC32/POWER7 using cmpb insn. |
| Copyright (C) 2010-2018 Free Software Foundation, Inc. |
| Contributed by Luis Machado <luisgpm@br.ibm.com>. |
| This file is part of the GNU C Library. |
| |
| The GNU C Library is free software; you can redistribute it and/or |
| modify it under the terms of the GNU Lesser General Public |
| License as published by the Free Software Foundation; either |
| version 2.1 of the License, or (at your option) any later version. |
| |
| The GNU C Library is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| Lesser General Public License for more details. |
| |
| You should have received a copy of the GNU Lesser General Public |
| License along with the GNU C Library; if not, see |
| <http://www.gnu.org/licenses/>. */ |
| |
| #include <sysdep.h> |
| |
| /* int [r3] memrchr (char *s [r3], int byte [r4], int size [r5]) */ |
| .machine power7 |
| ENTRY (__memrchr) |
| CALL_MCOUNT |
| add r7,r3,r5 /* Calculate the last acceptable address. */ |
| neg r0,r7 |
| addi r7,r7,-1 |
| mr r10,r3 |
| clrrwi r6,r7,7 |
| li r9,3<<5 |
| dcbt r9,r6,16 /* Stream hint, decreasing addresses. */ |
| |
| /* Replicate BYTE to word. */ |
| insrwi r4,r4,8,16 |
| insrwi r4,r4,16,0 |
| li r6,-4 |
| li r9,-1 |
| rlwinm r0,r0,3,27,28 /* Calculate padding. */ |
| clrrwi r8,r7,2 |
| srw r9,r9,r0 |
| cmplwi r5,16 |
| clrrwi r0,r10,2 |
| ble L(small_range) |
| |
| #ifdef __LITTLE_ENDIAN__ |
| lwzx r12,0,r8 |
| #else |
| lwbrx r12,0,r8 /* Load reversed word from memory. */ |
| #endif |
| cmpb r3,r12,r4 /* Check for BYTE in WORD1. */ |
| and r3,r3,r9 |
| cmplwi cr7,r3,0 /* If r3 == 0, no BYTEs have been found. */ |
| bne cr7,L(done) |
| |
| mtcrf 0x01,r8 |
| /* Are we now aligned to a doubleword boundary? If so, skip to |
| the main loop. Otherwise, go through the alignment code. */ |
| bf 29,L(loop_setup) |
| |
| /* Handle WORD2 of pair. */ |
| #ifdef __LITTLE_ENDIAN__ |
| lwzx r12,r8,r6 |
| #else |
| lwbrx r12,r8,r6 |
| #endif |
| addi r8,r8,-4 |
| cmpb r3,r12,r4 |
| cmplwi cr7,r3,0 |
| bne cr7,L(done) |
| |
| L(loop_setup): |
| /* The last word we want to read in the loop below is the one |
| containing the first byte of the string, ie. the word at |
| s & ~3, or r0. The first word read is at r8 - 4, we |
| read 2 * cnt words, so the last word read will be at |
| r8 - 4 - 8 * cnt + 4. Solving for cnt gives |
| cnt = (r8 - r0) / 8 */ |
| sub r5,r8,r0 |
| addi r8,r8,-4 |
| srwi r9,r5,3 /* Number of loop iterations. */ |
| mtctr r9 /* Setup the counter. */ |
| |
| /* Main loop to look for BYTE backwards in the string. |
| FIXME: Investigate whether 32 byte align helps with this |
| 9 instruction loop. */ |
| .align 5 |
| L(loop): |
| /* Load two words, compare and merge in a |
| single register for speed. This is an attempt |
| to speed up the byte-checking process for bigger strings. */ |
| |
| #ifdef __LITTLE_ENDIAN__ |
| lwzx r12,0,r8 |
| lwzx r11,r8,r6 |
| #else |
| lwbrx r12,0,r8 |
| lwbrx r11,r8,r6 |
| #endif |
| cmpb r3,r12,r4 |
| cmpb r9,r11,r4 |
| or r5,r9,r3 /* Merge everything in one word. */ |
| cmplwi cr7,r5,0 |
| bne cr7,L(found) |
| addi r8,r8,-8 |
| bdnz L(loop) |
| |
| /* We may have one more word to read. */ |
| cmplw r8,r0 |
| bnelr |
| |
| #ifdef __LITTLE_ENDIAN__ |
| lwzx r12,0,r8 |
| #else |
| lwbrx r12,0,r8 |
| #endif |
| cmpb r3,r12,r4 |
| cmplwi cr7,r3,0 |
| bne cr7,L(done) |
| blr |
| |
| .align 4 |
| L(found): |
| /* OK, one (or both) of the words contains BYTE. Check |
| the first word. */ |
| cmplwi cr6,r3,0 |
| bne cr6,L(done) |
| |
| /* BYTE must be in the second word. Adjust the address |
| again and move the result of cmpb to r3 so we can calculate the |
| pointer. */ |
| |
| mr r3,r9 |
| addi r8,r8,-4 |
| |
| /* r3 has the output of the cmpb instruction, that is, it contains |
| 0xff in the same position as BYTE in the original |
| word from the string. Use that to calculate the pointer. |
| We need to make sure BYTE is *before* the end of the |
| range. */ |
| L(done): |
| cntlzw r9,r3 /* Count leading zeros before the match. */ |
| cmplw r8,r0 /* Are we on the last word? */ |
| srwi r6,r9,3 /* Convert leading zeros to bytes. */ |
| addi r0,r6,-3 |
| sub r3,r8,r0 |
| cmplw cr7,r3,r10 |
| bnelr |
| bgelr cr7 |
| li r3,0 |
| blr |
| |
| .align 4 |
| L(null): |
| li r3,0 |
| blr |
| |
| /* Deals with size <= 16. */ |
| .align 4 |
| L(small_range): |
| cmplwi r5,0 |
| beq L(null) |
| |
| #ifdef __LITTLE_ENDIAN__ |
| lwzx r12,0,r8 |
| #else |
| lwbrx r12,0,r8 /* Load reversed word from memory. */ |
| #endif |
| cmpb r3,r12,r4 /* Check for BYTE in WORD1. */ |
| and r3,r3,r9 |
| cmplwi cr7,r3,0 |
| bne cr7,L(done) |
| |
| /* Are we done already? */ |
| cmplw r8,r0 |
| addi r8,r8,-4 |
| beqlr |
| |
| .align 5 |
| L(loop_small): |
| #ifdef __LITTLE_ENDIAN__ |
| lwzx r12,0,r8 |
| #else |
| lwbrx r12,0,r8 |
| #endif |
| cmpb r3,r12,r4 |
| cmplw r8,r0 |
| cmplwi cr7,r3,0 |
| bne cr7,L(done) |
| addi r8,r8,-4 |
| bne L(loop_small) |
| blr |
| |
| END (__memrchr) |
| weak_alias (__memrchr, memrchr) |
| libc_hidden_builtin_def (memrchr) |
