#!/usr/bin/env expect
############################################################################
# Purpose: Test non-normalized factors
############################################################################
# Copyright (C) SchedMD LLC.
#
# This file is part of Slurm, a resource management program.
# For details, see <https://slurm.schedmd.com/>.
# Please also read the included file: DISCLAIMER.
#
# Slurm is free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 2 of the License, or (at your option)
# any later version.
#
# Slurm is distributed in the hope that it will be useful, but WITHOUT ANY
# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
# details.
#
# You should have received a copy of the GNU General Public License along
# with Slurm; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA.
############################################################################
source ./globals
source ./globals_accounting

set timeout	60

set ta1         "$test_name-account.1"
set tq1         "$test_name-qos.1"

set p1          "$test_name-part.1"
set p2          "$test_name-part.2"

set jobid1 0
set jobid2 0
set jobid3 0
set jobid4 0

set cwd "[$bin_pwd]"

set access_err 0

# TODO: Remove this precondition check once Slurm 22.05 is no longer supported
regexp {(\d+).(\d+).(\S+)} [get_config_param SLURM_VERSION] - major minor release
if {$major < 23} {
        skip "This test is disabled in Slurm versions older than 23.02 (see bugs 14977 and 14864)"
}

#
# Check accounting config and bail if not found.
#
if {[get_config_param "AccountingStorageType"] ne "accounting_storage/slurmdbd"} {
	skip "This test can't be run without a usable AccountStorageType"
}
if {[get_config_param "PriorityType"] ne "priority/multifactor"} {
	skip "This test can't be run without a usable PriorityType"
}

#
# This test needs to be modified to use the core counts rather than CPU counts
#
set select_type_params [get_select_type_params ""]
if { [string first "CR_ONE_TASK_PER_CORE" $select_type_params] != -1 } {
	skip "This test can't be run SelectTypeParameters=CR_ONE_TASK_PER_CORE"
}

proc clean_assocs {} {
	global ta1 tq1

	remove_acct "" $ta1
	remove_qos $tq1
}

proc cleanup {} {
	global jobid1 jobid2 jobid3 jobid4 config_file

	cancel_job [list $jobid1 $jobid2 $jobid3 $jobid4]

	clean_assocs

	restore_conf $config_file
	reconfigure
}

proc part_cpu_cnt { partition } {
	global sinfo number

	set cpu_cnt 1
	spawn $sinfo -h -o "%C" -p $partition --state=idle
	expect {
		-re "($number)(K?)\/($number)(K?)" {
			set cpu_cnt $expect_out(3,string)
			if {$expect_out(4,string) ne ""} {
				set cpu_cnt [expr $cpu_cnt * 1024]
			}

			exp_continue
		}
		timeout {
			fail "sbatch not responding"
		}
		eof {
			wait
		}
	}
	return $cpu_cnt
}

proc sub_job { args state } {
	global number sbatch test_id bin_sleep

	set jobid 0
	set cmd "$sbatch -J$test_id -o/dev/null -e/dev/null --exclusive --wrap \"$bin_sleep 300\""
	append cmd " $args"

	spawn {*}$cmd
	expect {
		-re "Submitted batch job ($number)" {
			set jobid $expect_out(1,string)
			exp_continue
		}
		timeout {
			fail "sbatch not responding"
		}
		eof {
			wait
		}
	}

	if {$jobid == 0} {
		fail "Did not get sbatch jobid"
	}

	wait_for_job -fail $jobid $state

	return $jobid
}

proc sprio_args { args regex match_cnt } {
	global sprio

	set matches 0

	spawn $sprio {*}$args
	expect {
		-re $regex {
			incr matches
			exp_continue
		}
		timeout {
			fail "sprio not responding"
		}
		eof {
			wait
		}
	}

	if {$matches != $match_cnt} {
		fail "sprio $args failed to match '$regex' $match_cnt times"
	}
}

proc update_job { jobid prio {error ""} } {
	global scontrol

	set matches 0

	spawn $scontrol update jobid=$jobid sitefactor=$prio
	set tmp_re ".*"
	if {$error != ""} {
		set tmp_re $error
	}
	expect {
		-re $tmp_re {
			incr matches
		}
		timeout {
			fail "scontrol not responding"
		}
		eof {
			wait
		}
	}

	if {($error != "") && !$matches} {
		fail "Didn't get expected error '$error'"
	}
}


proc create_part { name nodes prio } {
	global scontrol

	spawn $scontrol create partitionname=$name priorityjobfactor=$prio nodes=$nodes
	expect {
		-re "error" {
			fail "scontrol found error"
		}
		timeout {
			fail "scontrol is not responding"
		}
		eof {
			wait
		}
	}

	set found 0
	spawn $scontrol show partitionname=$name
	expect {
		-re "PartitionName=$name" {
			set found 1
			exp_continue
		}
		timeout {
			fail "scontrol is not responding"
		}
		eof {
			wait
		}
	}

	if {$found == 0} {
		fail "scontrol did not create partition ($name)"
	}
}

################################################################

if {[info exists env(SPRIO_FORMAT)]} {
    unset env(SPRIO_FORMAT)
}

set config_path [get_conf_path]
set config_file $config_path/slurm.conf

save_conf $config_file

exec $bin_sed -i "s/^\\(PriorityWeight.*\\)/#\\1/Ig" $config_file
exec $bin_sed -i "s/^\\(PriorityFlags.*\\)/#\\1/Ig" $config_file
set prio_conf "
PriorityWeightAssoc     = 1
PriorityWeightJobSize   = 1
PriorityWeightPartition = 1
PriorityWeightQOS       = 1
PriorityWeightTRES=cpu=1
PriorityFlags=NO_NORMAL_ALL
"
exec $bin_echo $prio_conf >> $config_file
reconfigure -fail


# verify NO_NORMAL_ALL shows. It sets multiple flags but show be collapsed to
# the ALL flag.
set match 0
spawn $bin_bash -c "exec $scontrol show config | $bin_grep -i priorityflags"
expect {
	-re "NO_NORMAL_ALL" {
		incr match
		exp_continue
	}
	timeout {
		fail "scontrol not responding"
	}
	eof {
		wait
	}
}
if {!$match} {
	fail "Didn't find NO_NORMAL_ALL flag"
}

set idle_node [lindex [get_nodes_by_state] 0]
if {$idle_node == ""} {
	fail "No idle nodes"
}
log_info "idle: $idle_node"
create_part $p1 $idle_node 10
create_part $p2 $idle_node 20


clean_assocs

array set qos_req {}
set qos_req(priority) 200
if {[add_qos $tq1 [array get qos_req]]} {
	fail "Unable to add qos ($tq1)"
}

array set acct_req {}
set acct_req(priority) 100
set acct_req(qos) $tq1
if {[add_acct $ta1 [array get acct_req]]} {
	fail "Unable to add account ($ta1)"
}

array set user_req {}
set user_req(account) $ta1
if {[add_user [get_my_user_name] [array get user_req]]} {
	fail "Unable to add user to account ($ta1)"
}

set cpu_cnt [part_cpu_cnt $p1]
set jobid1 [sub_job "-n$cpu_cnt -p$p1 -A$ta1 --qos=$tq1" RUNNING]
set jobid2 [sub_job "-n$cpu_cnt -p$p1 -A$ta1 --qos=$tq1" PENDING]
set jobid3 [sub_job "-n$cpu_cnt -p$p2 -A$ta1 --qos=$tq1" PENDING]
set jobid4 [sub_job "-n$cpu_cnt -p$p1,$p2 -A$ta1 --qos=$tq1" PENDING]

sprio_args "-j $jobid2 -o \"%.15i %10B %10P %10Q %10T\"" "$jobid2\\s+100\\s+10\\s+200\\s+cpu=$cpu_cnt" 1
sprio_args "-j $jobid3 -o \"%.15i %10B %10P %10Q %10T\"" "$jobid3\\s+100\\s+20\\s+200\\s+cpu=$cpu_cnt" 1
sprio_args "-j $jobid4 -p$p1 -o \"%.15i %10B %10P %10Q %10T\"" "$jobid4\\s+100\\s+10\\s+200\\s+cpu=$cpu_cnt" 1
sprio_args "-j $jobid4 -p$p2 -o \"%.15i %10B %10P %10Q %10T\"" "$jobid4\\s+100\\s+20\\s+200\\s+cpu=$cpu_cnt" 1