#!/usr/bin/env expect
############################################################################
# Purpose: Test of Slurm functionality
#          Tests #PBS entry functionality in a batch script.
############################################################################
# Copyright (C) 2005-2006 The Regents of the University of California.
# Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
# Written by Danny Auble <da@llnl.gov>
# CODE-OCEC-09-009. All rights reserved.
#
# This file is part of Slurm, a resource management program.
# For details, see <https://slurm.schedmd.com/>.
# Please also read the included file: DISCLAIMER.
#
# Slurm is free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 2 of the License, or (at your option)
# any later version.
#
# Slurm is distributed in the hope that it will be useful, but WITHOUT ANY
# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
# details.
#
# You should have received a copy of the GNU General Public License along
# with Slurm; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA.
############################################################################
source ./globals

set file_in     "$test_dir/input"
set file_out    "$test_dir/output"
set delay       1
set node_cnt    3
set ppn_cnt     2
set min_mem     1024
set job_id      0
global env
set env_pbs_ignore "SBATCH_IGNORE_PBS"
set env($env_pbs_ignore) 0

set available [llength [get_nodes_by_state idle,alloc,comp]]
if {$available < $node_cnt} {
	skip "Not enough nodes currently available ($available avail, $node_cnt needed)"
}

proc cleanup {} {
	global job_id test_id

	cancel_job $job_id
}

log_user 0
spawn $scontrol show nodes
expect {
	-re " CPUs=($number)" {
		if {$expect_out(1,string) < $ppn_cnt} {
			set ppn_cnt $expect_out(1,string)
		}
		exp_continue
	}
	-re "RealMemory=($number)" {
		if {$expect_out(1,string) < $min_mem} {
			set min_mem $expect_out(1,string)
		}
		exp_continue
	}
	timeout {
		fail "scontrol not responding"
	}
	eof {
		wait
	}
}
log_user 1
log_debug "Actual configuration: min_cpus=$ppn_cnt  min_mem=$min_mem"
append min_mem_mb $min_mem "mb"

proc pbs_ignore_expects {} {
	set whitespace "\\s+"
	set number     "\\d+"
	global job_id node_cnt ppn_cnt min_mem
	set job_id     0
	set matches    0

	expect {
		-re "mem$whitespace: ($number)G" {
			set mem $expect_out(1,string)
			if { $mem * 1024 != $min_mem } {
				fail "Min memory is different ($mem) than requested ($min_mem)"
			} else {
				incr matches
			}
			exp_continue
		}
		-re "mem$whitespace: ($number)" {
			set mem $expect_out(1,string)
			if { $mem != $min_mem } {
				fail "Min memory is different ($mem) than requested ($min_mem)"
			} else {
				incr matches
			}
			exp_continue
		}
		-re "nodes$whitespace: ($number)" {
			set nodes $expect_out(1,string)
			if { $nodes != $node_cnt } {
				fail "Bad node count allocated"
			} else {
				incr matches
			}
			exp_continue
		}
		-re "ntasks$whitespace: ($number)" {
			set cpu_count $expect_out(1,string)
			set cpus_per_node [expr $cpu_count / $node_cnt]
			if { $cpus_per_node != $ppn_cnt } {
				fail "PPN count not sent correctly asked for $ppn_cnt but got $cpus_per_node"
			} else {
				incr matches
			}
			exp_continue
		}
		-re "batch job ($number)" {
			set job_id $expect_out(1,string)
			exp_continue
		}
		"error: Batch job submission failed" {
			log_warn "this might be legitimate, depending upon configuration"
			exp_continue
		}

		timeout {
			fail "sbatch not responding"
		}
		eof {
			wait
		}
	}
	if {$job_id != 0} {
		cancel_job $job_id
		set job_id 0
	}
	return $matches
}

#
# Build input script file
# NOTE: The initial sleep is so that all of the submissions have time
#   to occur before contending with a multitude of job step creations.
#   This is especially important on very slow systems (e.g. AIX).
#
# PBS commands in the batch file
make_bash_script $file_in "
#PBS -l nodes=$node_cnt+ppn=$ppn_cnt,mem=$min_mem_mb
$bin_sleep $delay
"
spawn $sbatch -vv -o $file_out $file_in
set matches [pbs_ignore_expects]
if {$matches != 3} {
	fail "sbatch didn't read the correct options from batch file ($matches of 3)"
}
log_info "#PBS batch command processed correctly"


log_info "--ignore-pbs in the batch file"
make_bash_script $file_in "
#SBATCH --ignore-pbs
#PBS -l nodes=$node_cnt+ppn=$ppn_cnt,mem=$min_mem_mb
$bin_sleep $delay
"
spawn $sbatch -vv -o $file_out $file_in
set matches [pbs_ignore_expects]
if {$matches != 0} {
	fail "#SBATCH --ignore-pbs was not processed"
}
log_info "#SBATCH --ignore-pbs processed correctly"


log_info "--ignore-pbs on the command line"
make_bash_script $file_in "
#PBS -l nodes=$node_cnt+ppn=$ppn_cnt,mem=$min_mem_mb
$bin_sleep $delay
"
spawn $sbatch --ignore-pbs -vv -o $file_out $file_in
set matches [pbs_ignore_expects]
if {$matches != 0} {
	fail "Command line arg --ignore-pbs was not processed"
}
log_info "command line arg --ignore-pbs processed correctly"


log_info "SBATCH_IGNORE_PBS=1 ENV VAR"
make_bash_script $file_in "
#PBS -l nodes=$node_cnt+ppn=$ppn_cnt,mem=$min_mem_mb
$bin_sleep $delay
"
set env($env_pbs_ignore) 1
spawn $sbatch -vv -o $file_out $file_in
set matches [pbs_ignore_expects]
if {$matches != 0} {
	fail "SBATCH_IGNORE_PBS=1 environment variable was not processed"
}
set env($env_pbs_ignore) 0
log_info "BATCH_IGNORE_PBS=1 environment variable processed correctly"