#!/usr/bin/env expect
############################################################################
# Purpose: Test of srun functionality
#          Test of hostfile option (-hostfile) inside of an allocation.
############################################################################
# Copyright (C) 2002-2006 The Regents of the University of California.
# Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
# Written by Danny Auble <da@llnl.gov>
# UCRL-CODE-217948.
#
# This file is part of Slurm, a resource management program.
# For details, see <https://slurm.schedmd.com/>.
# Please also read the included file: DISCLAIMER.
#
# Slurm is free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 2 of the License, or (at your option)
# any later version.
#
# Slurm is distributed in the hope that it will be useful, but WITHOUT ANY
# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
# details.
#
# You should have received a copy of the GNU General Public License along
# with Slurm; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA.
############################################################################
source ./globals

set hostfile    "$test_dir/hostfile"
set job_id      0
set node_count  0
set num_nodes   3
set task_count  0

# find out if we have enough nodes to test functionality
set node_count [get_partition_param [default_partition] "TotalNodes"]
if { $node_count < 3 } {
	skip "Insufficient nodes in default partition ($node_count < 3)"
}

proc cleanup {} {
	global job_id

	cancel_job $job_id
}

set node0 0
set node1 0
set node2 0
set node3 0
set node4 0

set timeout $max_job_delay
spawn $salloc -N$num_nodes -v -t2 $bin_bash
expect {
	-re "salloc: Granted job allocation ($number)" {
		set job_id $expect_out(1,string)
		reset_bash_prompt
		exp_continue
	}
	-re $test_prompt {
		#log_debug "Job initiated"
	}
	timeout {
		fail "salloc not responding"
	}
	eof {
		wait
	}
}
if {$job_id == 0} {
	fail "salloc failure"
}

for {set i 0} {$i<4} {incr i} {
	set extra ""

	if { $i==1 } {
		if { $node0 == 0 || $node1 == 0 || $node2 == 0 } {
			fail "Node names not set from previous srun"
		}
		send "export SLURM_HOSTFILE=$hostfile\r"
		expect {
			-re $test_prompt {
				#log_debug "Srun completed"
			}
		}
		set 1node0 $node0
		set 1node1 $node1
		set 1node2 $node2
		set file [open $hostfile "w"]
		puts $file "$node2\n$node0\n$node1"
		close $file
	} elseif { $i==2 } {
		if { $node_count < 3 } {
			skip "System must have at least 3 nodes to finish this test.  This system only has $node_count"
		}
		if { $node0 == 0 || $node1 == 0 || $node2 == 0 } {
			fail "Node names not set from previous srun"
		}
		set 2node0 $node1
		set 2node1 $node0
		set 2node2 $node0
		set 2node3 $node0
		set 2node4 $node0
		set file [open $hostfile "w"]
		puts $file "$node1\n$node0\n$node0\n$node0\n$node0"
		close $file
		set extra "-n5"
	} elseif { $i==3 } {
		if { $node0 == 0 || $node1 == 0 || $node2 == 0 } {
			fail "Node names not set from previous srun"
		}
		set 3node0 $node1
		set 3node1 $node0
		set 3node2 $node0
		set 3node3 $node0
		set 3node4 0
		set file [open $hostfile "w"]
		puts $file "$node1\n$node0\n$node0\n$node0\n$node0"
		close $file
		set extra "-n4"
	}
	set node0 0
	set node1 0
	set node2 0
	set node3 0
	set node4 0

	#
	# execute srun with a specific node count
	#
	send "$srun -l $extra -O $bin_printenv SLURMD_NODENAME\r"
	expect {
		-re "($number): *($re_word_str)" {
			set task_id $expect_out(1,string)
			if {$task_id == 0} {
				set node0 $expect_out(2,string)
			} elseif {$task_id == 1} {
				set node1 $expect_out(2,string)
			} elseif {$task_id == 2} {
				set node2 $expect_out(2,string)
			} elseif {$task_id == 3} {
				set node3 $expect_out(2,string)
			} elseif {$task_id == 4} {
				set node4 $expect_out(2,string)
			} elseif {$task_id == 5} {
				set node5 $expect_out(2,string)
			}
			exp_continue
		}
		-re $test_prompt {
			#log_debug "Srun completed"
		}
		-re "Granted job allocation ($number)" {
			set job_id $expect_out(1,string)
			exp_continue
		}
		timeout {
			fail "srun not responding"
		}
		eof {
		}
	}
	if { $i == 1 } {
		if {$node0 ne $1node2} {
			fail "Tasks not distributed by hostfile"
		} elseif {$node1 ne $1node0} {
			fail "Tasks not distributed by hostfile"
		} elseif {$node2 ne $1node1} {
			fail "Tasks not distributed by hostfile"
		}
	} elseif { $i == 2 } {
		if {$node0 ne $2node0} {
			fail "Tasks not distributed by hostfile"
		} elseif {$node1 ne $2node1} {
			fail "Tasks not distributed by hostfile"
		} elseif {$node2 ne $2node2} {
			fail "Tasks not distributed by hostfile"
		} elseif {$node3 ne $2node3} {
			fail "Tasks not distributed by hostfile"
		} elseif {$node4 ne $2node4} {
			fail "Tasks not distributed by hostfile"
		}
	} elseif { $i==3 } {
		if {$node0 ne $3node0} {
			fail "Tasks not distributed by hostfile"
		} elseif {$node1 ne $3node1} {
			fail "Tasks not distributed by hostfile"
		} elseif {$node2 ne $3node2} {
			fail "Tasks not distributed by hostfile"
		} elseif {$node3 ne $3node3} {
			fail "Tasks not distributed by hostfile"
		} elseif {$node4 ne $3node4} {
			fail "Tasks not distributed by hostfile"
		}
	}
}
send "unset SLURM_HOSTFILE\r"
expect {
	-re $test_prompt {
		#log_debug "Srun completed"
	}
}

# try with commandline -w option
for {set i 0} {$i<5} {incr i} {
	set extra ""

	if { $i==1 } {
		if { $node0 == 0 || $node1 == 0 || $node2 == 0 } {
			fail "Node names not set from previous srun"
		}
		set 1node0 $node0
		set 1node1 $node1
		set 1node2 $node2
		set extra " -m arbitrary -w $node2,$node0,$node1"
	} elseif { $i==2 } {
		if { $node_count < 3 } {
			skip "System must have at least 3 nodes to finish this test. This system only has $node_count"
		}
		if { $node0 == 0 || $node1 == 0 || $node2 == 0 } {
			fail "Node names not set from previous srun"
		}
		set 2node0 $node1
		set 2node1 $node0
		set 2node2 $node0
		set 2node3 $node0
		set 2node4 $node0
		set extra " -m arbitrary -w $node1,$node0,$node0,$node0,$node0"
	} elseif { $i==3 } {
		if { $node1 == 0 } {
			fail "Node names not set from previous srun"
		}
		set 4node0 $node1
		set extra " -w $node1"
	} elseif { $i==4 } {
		if { $node0 == 0 || $node1 == 0 || $node2 == 0 } {
			fail "Node names not set from previous srun"
		}
		set 4node0 $node1
		set 4node1 $node0
		set 4node2 $node0
		set 4node3 $node0
		set 4node4 0
		set extra " -m arbitrary -w $node1,$node0,$node0,$node0,$node0 -n4"
	}

	set node0 0
	set node1 0
	set node2 0
	set node3 0
	set node4 0

	#
	# execute srun with a specific node count
	#

	send "$srun -l $extra -O $bin_printenv SLURMD_NODENAME\r"

	expect {
		-re "($number): *($re_word_str)" {
			set task_id $expect_out(1,string)
			if {$task_id == 0} {
				set node0 $expect_out(2,string)
			} elseif {$task_id == 1} {
				set node1 $expect_out(2,string)
			} elseif {$task_id == 2} {
				set node2 $expect_out(2,string)
			} elseif {$task_id == 3} {
				set node3 $expect_out(2,string)
			} elseif {$task_id == 4} {
				set node4 $expect_out(2,string)
			} elseif {$task_id == 5} {
				set node5 $expect_out(2,string)
			}
			exp_continue
		}
		-re "error" {
			if { $i == 4 } {
				log_debug "This error is expected, no worries"
			} else {
				fail "Unexpected error received"
			}
			exp_continue
		}
		-re $test_prompt {
			#log_debug "Srun completed"
		}
		-re "slurm job ($number)" {
			set job_id $expect_out(1,string)
			exp_continue
		}
		timeout {
			fail "srun not responding"
		}
		eof {
		}
	}
	if { $i == 1 } {
		if {$node0 ne $1node2} {
			fail "Tasks not distributed by -w"
		} elseif {$node1 ne $1node0} {
			fail "Tasks not distributed by -w"
		} elseif {$node2 ne $1node1} {
			fail "Tasks not distributed by -w"
		}
	} elseif { $i == 2 } {
		if {$node0 ne $2node0} {
			fail "Tasks not distributed by -w"
		} elseif {$node1 ne $2node1} {
			fail "Tasks not distributed by -w"
		} elseif {$node2 ne $2node2} {
			fail "Tasks not distributed by -w"
		} elseif {$node3 ne $2node3} {
			fail "Tasks not distributed by -w"
		} elseif {$node4 ne $2node4} {
			fail "Tasks not distributed by -w"
		}
	} elseif { $i == 3 } {
		if {$node2 ne $4node0} {
			fail "We only asked for 1 node in the allocation and we were unable to get it"
		}
	}
}

send "exit\r"
expect {
	-re "error.*Exit 1" {
		log_debug "This error is expected, no worries"
		exp_continue
	}
	timeout {
		kill_srun
		fail "srun not responding"
	}
	eof {
		wait
	}
}