/*****************************************************************************
 *  parse_config.h - parse any slurm.conf-like configuration file
 *
 *  NOTE: when you see the prefix "s_p_", think "slurm parser".
 *
 *  $Id$
 *****************************************************************************
 *  Copyright (C) 2006 The Regents of the University of California.
 *  Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
 *  Written by Christopher J. Morrone <morrone2@llnl.gov>.
 *  CODE-OCEC-09-009. All rights reserved.
 *
 *  This file is part of SLURM, a resource management program.
 *  For details, see <https://computing.llnl.gov/linux/slurm/>.
 *  Please also read the included file: DISCLAIMER.
 *
 *  SLURM is free software; you can redistribute it and/or modify it under
 *  the terms of the GNU General Public License as published by the Free
 *  Software Foundation; either version 2 of the License, or (at your option)
 *  any later version.
 *
 *  In addition, as a special exception, the copyright holders give permission
 *  to link the code of portions of this program with the OpenSSL library under
 *  certain conditions as described in each individual source file, and
 *  distribute linked combinations including the two. You must obey the GNU
 *  General Public License in all respects for all of the code used other than
 *  OpenSSL. If you modify file(s) with this exception, you may extend this
 *  exception to your version of the file(s), but you are not obligated to do
 *  so. If you do not wish to do so, delete this exception statement from your
 *  version.  If you delete this exception statement from all source files in
 *  the program, then also delete it here.
 *
 *  SLURM is distributed in the hope that it will be useful, but WITHOUT ANY
 *  WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
 *  FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
 *  details.
 *
 *  You should have received a copy of the GNU General Public License along
 *  with SLURM; if not, write to the Free Software Foundation, Inc.,
 *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA.
\*****************************************************************************/

#ifndef _PARSE_CONFIG_H
#define _PARSE_CONFIG_H

#include <stdint.h>

/*
 * This slurm file parser provides a method for parsing a file
 * for key-value pairs of the form "key = value".  This parser can be used
 * for any slurm-like configuration file, not just slurm.conf.  If you are
 * looking for code specific to slurm.conf, look in
 * src/common/slurm_conf.[hc].
 *
 * In the parsed file, any amount of white-space is allowed between the the
 * key, equal-sign, and value.  The parser handles comments, line
 * continuations, and escaped characters automatically.  Double-quotes can
 * be used to surround an entire value if white-space is needed within
 * a value string.
 *
 * A comment begins with a "#" and ends at the end of the line. A line
 * continuation is a "\" character at the end of the line (only white-space
 * may follow the "\").  A line continuation tells the parser to
 * concatenate the following line with the current line.
 *
 * To include a literal "\" or "#" character in a file, it can be escaped
 * by a preceding "\".
 *
 * Double-quotes CANNOT be escaped, and they must surround the entire value
 * string, they cannot be used within some substring of a value string.
 * An empty string can be specified with doubles quotes: Apple="".
 *
 * To use this parser, first construct an array of s_p_options_t structures.
 * Only the "key" string needs to be non-zero.  Zero or NULL are valid
 * defaults for type, handler, and destroy, which conventiently allows
 * then to be left out in any static initializations of options arrays. For
 * instance:
 *
 *	s_p_options_t options[] = {{"Apples", S_P_UINT16},
 *	                           {"Oranges"},
 *	                           {NULL}};
 *
 * In this example, the handler and destroy functions for the "Apples" key
 * are NULL pointers, and for key "Oranges" even the type is zero.  A zero
 * type is equivalent to specifying type S_P_IGNORE.
 *
 * Once an s_p_options_t array is defined, it is converted into a slurm
 * parser hash table structure with the s_p_hashtbl_create() function.
 * The s_p_hashtbl_t thus returned can be given to the s_p_parse_file()
 * function to parse a file, and fill in the s_p_hashtbl_t structure with
 * the values found in the file.  Values for keys can then be retrieved
 * from the s_p_hashtbl_t with the functions with names beginning with
 * "s_p_get_", e.g. s_p_get_boolean(), s_p_get_string(), s_p_get_uint16(),
 * etc.
 *
 * Valid types
 * -----------
 *
 * S_P_IGNORE - Any instance of specified key and associated value in a file
 *	will be allowed, but the value will not be stored and will not
 *	be retirevable from the s_p_hashtbl_t.
 * S_P_STRING - The value for a given key will be saved in string form, no
 *      converstions will be performed on the value.
 * S_P_LONG - The value for a given key must be a valid
 *	string representation of a long integer (as determined by strtol()),
 *	otherwise an error will be raised.
 * S_P_UINT16 - The value for a given key must be a valid
 *	string representation of an unsigned 16-bit integer.
 * S_P_LONG - The value for a given key must be be a valid
 *	string representation of an unsigned 32-bit integer.
 * S_P_POINTER - The parser makes no assumption about the type of the value.
 *    	The s_p_get_pointer() function will return a pointer to the
 *	s_p_hashtbl_t's internal copy of the value.  By default, the value
 *	will simply be the string representation of the value found in the file.
 *	This differs from S_P_STRING in that s_p_get_string() returns a COPY
 *	of the value which must be xfree'ed by the user.  The pointer
 *	returns by s_p_get_pointer() must NOT be freed by the user.
 *  	It is intended that normally S_P_POINTER with be used in conjunction
 *	with "handler" and "destroy" functions to implement a custom type.
 * S_P_ARRAY - This (and S_P_IGNORE, which does not record the fact that it
 *	has seen the key previously) is the only type which allows its key to
 * 	appear multiple times in a file.  With any other type (except
 *	S_P_IGNORE), an error will be raised when a key is seen more than
 *	once in a file.
 *	S_P_ARRAY works mostly the same as S_P_POINTER, except that it builds
 *	an array of pointers to the found values.
 *
 * Handlers and destructors
 * ------------------------
 *
 * Any key specified in an s_p_options_t array can have function callbacks for
 * a "handler" function and a "destroy" function.  The prototypes for each
 * are available below in the typedef of s_p_options_t.
 *
 * The "handler" function is given the the "key" string, "value" string, and a
 * pointer to the remainder of the "line" on which the key-value pair was found
 * (this is the line after the parser has removed comments and concatenated
 * continued lines).  The handler can transform the value any way it desires,
 * and then return a pointer to the newly allocated value data in the "data"
 * pointer.  The handler shall also return int the "leftover" parameter a
 * pointer into the "line" buffer designating the start of any leftover,
 * unparsed characters in the string.  The return code from "handler" must be
 * -1 if the value is invalid, 0 if the value is valid but no value will be set
 * for "data" (the parser will not flag this key as already seen, and the
 * destroy() function will not be called during s_p_hashtbl_destroy()),
 * and 1 if "data" is set.
 *
 * If the "destroy" function is set for a key, and the parser will mark the key
 * as "seen" during parsing, then it will pass the pointer to the value data
 * to the "destroy" function when s_p_hashtbl_destroy() is called.  If
 * a key was "seen" during parsing, but the "destroy" function is NULL,
 * s_p_hashtbl_destroy() will call xfree() on the data pointer.
 */

typedef struct s_p_values s_p_values_t;
typedef s_p_values_t * s_p_hashtbl_t;

typedef enum slurm_parser_enum {
	S_P_IGNORE = 0,
	S_P_STRING,
	S_P_LONG,
	S_P_UINT16,
	S_P_UINT32,
	S_P_POINTER,
	S_P_ARRAY,
	S_P_BOOLEAN
} slurm_parser_enum_t;

typedef struct conf_file_options {
	char *key;
	slurm_parser_enum_t type;
	int (*handler)(void **data, slurm_parser_enum_t type,
		       const char *key, const char *value,
		       const char *line, char **leftover);
	void (*destroy)(void *data);
} s_p_options_t;


s_p_hashtbl_t *s_p_hashtbl_create(struct conf_file_options options[]);
void s_p_hashtbl_destroy(s_p_hashtbl_t *hashtbl);

/* Returns SLURM_SUCCESS if file was opened and parse correctly */
int s_p_parse_file(s_p_hashtbl_t *hashtbl, char *filename);

/*
 * Returns 1 if the line is parsed cleanly, and 0 otherwise.
 */
int s_p_parse_line(s_p_hashtbl_t *hashtbl, const char *line, char **leftover);

/*
 * s_p_get_string
 *
 * Search for a key in a s_p_hashtbl_t with value of type
 * string.  If the key is found and has a set value, the
 * value is retuned in "str".
 *
 * OUT str - pointer to a copy of the string value
 *           (caller is resonsible for freeing str with xfree())
 * IN key - hash table key.
 * IN hashtbl - hash table created by s_p_hashtbl_create()
 *
 * Returns 1 when a value was set for "key" during parsing and "str"
 *   was successfully set, otherwise returns 0;
 *
 * NOTE: Caller is responsible for freeing the returned string with xfree!
 */
int s_p_get_string(char **str, const char *key, const s_p_hashtbl_t *hashtbl);

/*
 * s_p_get_long
 *
 * Search for a key in a s_p_hashtbl_t with value of type
 * long.  If the key is found and has a set value, the
 * value is retuned in "num".
 *
 * OUT num - pointer to a long where the value is returned
 * IN key - hash table key
 * IN hashtbl - hash table created by s_p_hashtbl_create()
 *
 * Returns 1 when a value was set for "key" during parsing and "num"
 *   was successfully set, otherwise returns 0;
 */
int s_p_get_long(long *num, const char *key, const s_p_hashtbl_t *hashtbl);

/*
 * s_p_get_uint16
 *
 * Search for a key in a s_p_hashtbl_t with value of type
 * uint16.  If the key is found and has a set value, the
 * value is retuned in "num".
 *
 * OUT num - pointer to a uint16_t where the value is returned
 * IN key - hash table key
 * IN hashtbl - hash table created by s_p_hashtbl_create()
 *
 * Returns 1 when a value was set for "key" during parsing and "num"
 *   was successfully set, otherwise returns 0;
 */
int s_p_get_uint16(uint16_t *num, const char *key,
		   const s_p_hashtbl_t *hashtbl);

/*
 * s_p_get_uint32
 *
 * Search for a key in a s_p_hashtbl_t with value of type
 * uint32.  If the key is found and has a set value, the
 * value is retuned in "num".
 *
 * OUT num - pointer to a uint32_t where the value is returned
 * IN key - hash table key
 * IN hashtbl - hash table created by s_p_hashtbl_create()
 *
 * Returns 1 when a value was set for "key" during parsing and "num"
 *   was successfully set, otherwise returns 0;
 */
int s_p_get_uint32(uint32_t *num, const char *key,
		   const s_p_hashtbl_t *hashtbl);

/*
 * s_p_get_pointer
 *
 * Search for a key in a s_p_hashtbl_t with value of type
 * pointer.  If the key is found and has a set value, the
 * value is retuned in "ptr".
 *
 * OUT num - pointer to a void pointer where the value is returned
 * IN key - hash table key
 * IN hashtbl - hash table created by s_p_hashtbl_create()
 *
 * Returns 1 when a value was set for "key" during parsing and "ptr"
 *   was successfully set, otherwise returns 0;
 */
int s_p_get_pointer(void **ptr, const char *key, const s_p_hashtbl_t *hashtbl);

/*
 * s_p_get_array
 *
 * Most s_p_ data types allow a key to appear only once in a file
 * (s_p_parse_file) or line (s_p_parse_line).  S_P_ARRAY is the exception.
 *
 * S_P_ARRAY allows a key to appear any number of times.  Each time
 * a particular key is found the value array grows by one element, and
 * that element contains a pointer to the newly parsed value.  You can
 * think of this as being an array of S_P_POINTER types.
 *
 * OUT num - pointer to a void pointer-pointer where the value is returned
 * IN key - hash table key
 * IN hashtbl - hash table created by s_p_hashtbl_create()
 *
 * Returns 1 when a value was set for "key" during parsing and "ptr"
 *   was successfully set, otherwise returns 0;
 */
int s_p_get_array(void **ptr_array[], int *count,
		  const char *key, const s_p_hashtbl_t *hashtbl);

/*
 * s_p_get_boolean
 *
 * Search for a key in a s_p_hashtbl_t with value of type
 * boolean.  If the key is found and has a set value, the
 * value is retuned in "flag".
 *
 * OUT flag - pointer to a bool where the value is returned
 * IN key - hash table key
 * IN hashtbl - hash table created by s_p_hashtbl_create()
 *
 * Returns 1 when a value was set for "key" during parsing and "num"
 *   was successfully set, otherwise returns 0;
 */
int s_p_get_boolean(bool *flag, const char *key, const s_p_hashtbl_t *hashtbl);

/*
 * Given an "options" array, print the current values of all
 * options in supplied hash table "hashtbl".
 *
 * Primarily for debugging purposes.
 */
void s_p_dump_values(const s_p_hashtbl_t *hashtbl,
		     const s_p_options_t options[]);


#endif /* !_PARSE_CONFIG_H */