/*****************************************************************************\
 *  slurm_protocol_api.h - high-level slurm communication functions
 *	definitions
 *****************************************************************************
 *  Copyright (C) 2002-2006 The Regents of the University of California.
 *  Copyright (C) 2008-2009 Lawrence Livermore National Security.
 *  Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
 *  Written by Kevin Tew <tew1@llnl.gov>, et. al.
 *  CODE-OCEC-09-009. All rights reserved.
 *
 *  This file is part of SLURM, a resource management program.
 *  For details, see <https://computing.llnl.gov/linux/slurm/>.
 *  Please also read the included file: DISCLAIMER.
 *
 *  SLURM is free software; you can redistribute it and/or modify it under
 *  the terms of the GNU General Public License as published by the Free
 *  Software Foundation; either version 2 of the License, or (at your option)
 *  any later version.
 *
 *  In addition, as a special exception, the copyright holders give permission
 *  to link the code of portions of this program with the OpenSSL library under
 *  certain conditions as described in each individual source file, and
 *  distribute linked combinations including the two. You must obey the GNU
 *  General Public License in all respects for all of the code used other than
 *  OpenSSL. If you modify file(s) with this exception, you may extend this
 *  exception to your version of the file(s), but you are not obligated to do
 *  so. If you do not wish to do so, delete this exception statement from your
 *  version.  If you delete this exception statement from all source files in
 *  the program, then also delete it here.
 *
 *  SLURM is distributed in the hope that it will be useful, but WITHOUT ANY
 *  WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
 *  FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
 *  details.
 *
 *  You should have received a copy of the GNU General Public License along
 *  with SLURM; if not, write to the Free Software Foundation, Inc.,
 *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA.
\*****************************************************************************/

#ifndef _SLURM_PROTOCOL_API_H
#define _SLURM_PROTOCOL_API_H

#if HAVE_CONFIG_H
#  include "config.h"
#  if HAVE_INTTYPES_H
#    include <inttypes.h>
#  else
#    if HAVE_STDINT_H
#      include <stdint.h>
#    endif
#  endif			/* HAVE_INTTYPES_H */
#else				/* !HAVE_CONFIG_H */
#  include <inttypes.h>
#endif				/*  HAVE_CONFIG_H */

#include <sys/types.h>
#include <stdarg.h>

#include <slurm/slurm_errno.h>

#include "src/common/pack.h"
#include "src/common/slurm_protocol_common.h"
#include "src/common/slurm_protocol_defs.h"
#include "src/common/slurm_protocol_util.h"

#define MIN_NOALLOC_JOBID ((uint32_t) 0xffff0000)
#define MAX_NOALLOC_JOBID ((uint32_t) 0xfffffffd)

enum controller_id {
	PRIMARY_CONTROLLER = 1,
	SECONDARY_CONTROLLER = 2
};

/* unit types */
enum {
	UNIT_NONE,
	UNIT_KILO,
	UNIT_MEGA,
	UNIT_GIGA,
	UNIT_PETA,
	UNIT_UNKNOWN
};

/**********************************************************************\
 * protocol configuration functions
\**********************************************************************/

/* slurm_set_api_config
 * sets the slurm_protocol_config object
 * IN protocol_conf		-  slurm_protocol_config object
 */
int inline slurm_set_api_config(slurm_protocol_config_t * protocol_conf);

/* slurm_get_api_config
 * returns a pointer to the current slurm_protocol_config object
 * RET slurm_protocol_config_t	- current slurm_protocol_config object
 */
inline slurm_protocol_config_t *slurm_get_api_config(void);

/* slurm_get_batch_start_timeout
 * RET BatchStartTimeout value from slurm.conf
 */
uint16_t slurm_get_batch_start_timeout(void);

/* slurm_get_resume_timeout
 * RET ResumeTimeout value from slurm.conf
 */
uint16_t slurm_get_resume_timeout(void);

/* slurm_get_suspend_time
 * RET SuspendTime value from slurm.conf
 */
uint32_t slurm_get_suspend_time(void);

/* slurm_get_complete_wait
 * RET CompleteWait value from slurm.conf
 */
uint16_t slurm_get_complete_wait(void);

/* slurm_get_debug_flags
 * RET DebugFlags value from slurm.conf
 */
uint32_t slurm_get_debug_flags(void);

/* slurm_get_def_mem_per_cpu
 * RET DefMemPerCPU/Node value from slurm.conf
 */
uint32_t slurm_get_def_mem_per_cpu(void);

/* slurm_get_kill_on_bad_exit
 * RET KillOnBadExit value from slurm.conf
 */
uint16_t slurm_get_kill_on_bad_exit(void);

/* slurm_get_max_mem_per_cpu
 * RET MaxMemPerCPU/Node value from slurm.conf
 */
uint32_t slurm_get_max_mem_per_cpu(void);

/* slurm_get_epilog_msg_time
 * RET EpilogMsgTime value from slurm.conf
 */
uint32_t slurm_get_epilog_msg_time(void);

/* slurm_get_env_timeout
 * return default timeout for srun/sbatch --get-user-env option
 */
int inline slurm_get_env_timeout(void);

/* slurm_get_mpi_default
 * get default mpi value from slurmctld_conf object
 * RET char *   - mpi default value from slurm.conf,  MUST be xfreed by caller
 */
char *slurm_get_mpi_default(void);

/* slurm_get_mpi_params
 * get mpi parameters value from slurmctld_conf object
 * RET char *   - mpi default value from slurm.conf,  MUST be xfreed by caller
 */
char *slurm_get_mpi_params(void);

/* slurm_get_msg_timeout
 * get default message timeout value from slurmctld_conf object
 */
uint16_t inline slurm_get_msg_timeout(void);

/* slurm_api_set_conf_file
 *      set slurm configuration file to a non-default value
 * pathname IN - pathname of slurm configuration file to be used
 */
extern void slurm_api_set_conf_file(char *pathname);

/* slurm_api_set_default_config
 *	called by the send_controller_msg function to insure that at least
 *	the compiled in default slurm_protocol_config object is initialized
 * RET int 		- return code
 */
int inline slurm_api_set_default_config();

/* slurm_api_clear_config
 * execute this only at program termination to free all memory */
void inline slurm_api_clear_config(void);

/* slurm_get_health_check_program
 * get health_check_program from slurmctld_conf object from slurmctld_conf object
 * RET char *   - health_check_program, MUST be xfreed by caller
 */
char *slurm_get_health_check_program(void);

/* slurm_get_plugin_dir
 * get plugin directory from slurmctld_conf object from slurmctld_conf object
 * RET char *   - plugin directory, MUST be xfreed by caller
 */
char *slurm_get_plugin_dir(void);

/* slurm_get_priority_decay_hl
 * returns the priority decay half life in seconds from slurmctld_conf object
 * RET uint32_t - decay_hl in secs.
 */
uint32_t slurm_get_priority_decay_hl(void);

/* slurm_get_priority_calc_period
 * returns the seconds between priority decay calculation from slurmctld_conf
 * RET uint32_t - calc_period in secs.
 */
uint32_t slurm_get_priority_calc_period(void);

/* slurm_get_priority_favor_small
 * returns weither or not we are favoring small jobs from slurmctld_conf object
 * RET bool - true if favor small, false else.
 */
bool slurm_get_priority_favor_small(void);

/* slurm_get_priority_max_age
 * returns the priority age max in seconds from slurmctld_conf object
 * RET uint32_t - max_age in secs.
 */
uint32_t slurm_get_priority_max_age(void);

/* slurm_get_priority_reset_period
 * returns the priority usage reset period in seconds from slurmctld_conf object
 * RET uint16_t - flag, see PRIORITY_RESET_* in slurm/slurm.h.
 */
uint16_t slurm_get_priority_reset_period(void);

/* slurm_get_priority_type
 * returns the priority type from slurmctld_conf object
 * RET char *    - priority type, MUST be xfreed by caller
 */
char *slurm_get_priority_type(void);

/* slurm_get_priority_weight_age
 * returns the priority weight for age from slurmctld_conf object
 * RET uint32_t - factor weight.
 */
uint32_t slurm_get_priority_weight_age(void);

/* slurm_get_priority_weight_fairshare
 * returns the priority weight for fairshare from slurmctld_conf object
 * RET uint32_t - factor weight.
 */
uint32_t slurm_get_priority_weight_fairshare(void);

/* slurm_get_priority_weight_job_size
 * returns the priority weight for job size from slurmctld_conf object
 * RET uint32_t - factor weight.
 */
uint32_t slurm_get_priority_weight_job_size(void);

/* slurm_get_priority_weight_partition
 * returns the priority weight for partitions from slurmctld_conf object
 * RET uint32_t - factor weight.
 */
uint32_t slurm_get_priority_weight_partition(void);

/* slurm_get_priority_weight_qos
 * returns the priority weight for QOS from slurmctld_conf object
 * RET uint32_t - factor weight.
 */
uint32_t slurm_get_priority_weight_qos(void);

/* slurm_get_private_data
 * get private data from slurmctld_conf object
 * RET uint16_t   - private_data
 */
uint16_t slurm_get_private_data(void);

/* slurm_get_state_save_location
 * get state_save_location from slurmctld_conf object from slurmctld_conf object
 * RET char *   - state_save_location directory, MUST be xfreed by caller
 */
char *slurm_get_state_save_location(void);

/* slurm_get_auth_type
 * returns the authentication type from slurmctld_conf object
 * RET char *    - auth type, MUST be xfreed by caller
 */
extern char *slurm_get_auth_type(void);

/* slurm_set_auth_type
 * set the authentication type in slurmctld_conf object
 * used for security testing purposes
 * RET 0 or error code
 */
extern int slurm_set_auth_type(char *auth_type);

/* slurm_get_checkpoint_type
 * returns the checkpoint_type from slurmctld_conf object
 * RET char *    - checkpoint type, MUST be xfreed by caller
 */
extern char *slurm_get_checkpoint_type(void);

/* slurm_get_cluster_name
 * returns the cluster name from slurmctld_conf object
 * RET char *    - cluster name,  MUST be xfreed by caller
 */
char *slurm_get_cluster_name(void);

/* slurm_get_crypto_type
 * returns the crypto_type from slurmctld_conf object
 * RET char *    - crypto type, MUST be xfreed by caller
 */
extern char *slurm_get_crypto_type(void);

/* slurm_get_fast_schedule
 * returns the value of fast_schedule in slurmctld_conf object
 */
extern uint16_t slurm_get_fast_schedule(void);

/* slurm_get_track_wckey
 * returns the value of track_wckey in slurmctld_conf object
 */
extern uint16_t slurm_get_track_wckey(void);

/* slurm_get_topology_plugin
 * returns the value of topology_plugin in slurmctld_conf object
 * RET char *    - topology type, MUST be xfreed by caller
 */
extern char * slurm_get_topology_plugin(void);

/* slurm_set_tree_width
 * sets the value of tree_width in slurmctld_conf object
 * RET 0 or error code
 */
extern int slurm_set_tree_width(uint16_t tree_width);

/* slurm_get_tree_width
 * returns the value of tree_width in slurmctld_conf object
 */
extern uint16_t slurm_get_tree_width(void);

/* slurm_get_accounting_storage_type
 * returns the accounting storage type from slurmctld_conf object
 * RET char *    - accounting storage type,  MUST be xfreed by caller
 */
char *slurm_get_accounting_storage_type(void);

/* slurm_get_accounting_storage_user
 * returns the storage user from slurmctld_conf object
 * RET char *    - storage user,  MUST be xfreed by caller
 */
char *slurm_get_accounting_storage_user(void);

/* slurm_set_accounting_storage_user
 * IN: char *user (name of file or database)
 * RET 0 or error code
 */
int slurm_set_accounting_storage_user(char *user);

/* slurm_get_accounting_storage_backup_host
 * returns the storage host from slurmctld_conf object
 * RET char *    - storage backup host,  MUST be xfreed by caller
 */
char *slurm_get_accounting_storage_backup_host(void);

/* slurm_get_accounting_storage_host
 * returns the storage host from slurmctld_conf object
 * RET char *    - storage host,  MUST be xfreed by caller
 */
char *slurm_get_accounting_storage_host(void);

/* slurm_set_accounting_storage_host
 * IN: char *host (name of file or database)
 * RET 0 or error code
 */
int slurm_set_accounting_storage_host(char *host);

/* slurm_get_accounting_storage_enforce
 * returns what level to enforce associations at
 */
int slurm_get_accounting_storage_enforce(void);

/* slurm_get_is_association_based_accounting
 * returns if we are doing accounting by associations
 */
int slurm_get_is_association_based_accounting(void);

/* slurm_get_accounting_storage_pass
 * returns the storage password from slurmctld_conf object
 * RET char *    - storage location,  MUST be xfreed by caller
 */
char *slurm_get_accounting_storage_loc(void);

/* slurm_set_accounting_storage_loc
 * IN: char *loc (name of file or database)
 * RET 0 or error code
 */
int slurm_set_accounting_storage_loc(char *loc);

/* slurm_get_accounting_storage_pass
 * returns the storage password from slurmctld_conf object
 * RET char *    - storage password,  MUST be xfreed by caller
 */
char *slurm_get_accounting_storage_pass(void);

/* slurm_get_accounting_storage_port
 * returns the storage port from slurmctld_conf object
 * RET uint32_t   - storage port
 */
uint32_t slurm_get_accounting_storage_port(void);

/* slurm_set_accounting_storage_port
 * sets the storage port in slurmctld_conf object
 * RET 0 or error code
 */
int slurm_set_accounting_storage_port(uint32_t storage_port);

/* slurm_get_preempt_mode
 * returns the PreemptMode value from slurmctld_conf object
 * RET uint16_t   - PreemptMode value (See PREEMPT_MODE_* in slurm.h)
 */
uint16_t slurm_get_preempt_mode(void);

/* slurm_get_jobacct_gather_type
 * returns the job accounting type from slurmctld_conf object
 * RET char *    - job accounting type,  MUST be xfreed by caller
 */
char *slurm_get_jobacct_gather_type(void);

/* slurm_get_jobacct_gather_freq
 * returns the job accounting poll frequency from the slurmctld_conf object
 * RET int    - job accounting frequency
 */
uint16_t slurm_get_jobacct_gather_freq(void);

/* slurm_get_jobcomp_type
 * returns the job completion logger type from slurmctld_conf object
 * RET char *    - job completion type,  MUST be xfreed by caller
 */
char *slurm_get_jobcomp_type(void);

/* slurm_get_jobcomp_loc
 * returns the job completion loc from slurmctld_conf object
 * RET char *    - job completion location,  MUST be xfreed by caller
 */
char *slurm_get_jobcomp_loc(void);

/* slurm_get_jobcomp_user
 * returns the storage user from slurmctld_conf object
 * RET char *    - storage user,  MUST be xfreed by caller
 */
char *slurm_get_jobcomp_user(void);

/* slurm_get_jobcomp_host
 * returns the storage host from slurmctld_conf object
 * RET char *    - storage host,  MUST be xfreed by caller
 */
char *slurm_get_jobcomp_host(void);

/* slurm_get_jobcomp_pass
 * returns the storage password from slurmctld_conf object
 * RET char *    - storage password,  MUST be xfreed by caller
 */
char *slurm_get_jobcomp_pass(void);

/* slurm_get_jobcomp_port
 * returns the storage port from slurmctld_conf object
 * RET uint32_t   - storage port
 */
uint32_t slurm_get_jobcomp_port(void);

/* slurm_set_jobcomp_port
 * sets the jobcomp port in slurmctld_conf object
 * RET 0 or error code
 */
int slurm_set_jobcomp_port(uint32_t port);

/* slurm_get_preempt_type
 * get PreemptType from slurmctld_conf object
 * RET char *   - select_type, MUST be xfreed by caller
 */
char *slurm_get_preempt_type(void);

/* slurm_get_propagate_prio_process
 * return the PropagatePrioProcess flag from slurmctld_conf object
 */
extern uint16_t slurm_get_propagate_prio_process(void);

/* slurm_get_proctrack_type
 * get ProctrackType from slurmctld_conf object
 * RET char *   - proctrack type, MUST be xfreed by caller
 */
char *slurm_get_proctrack_type(void);

/* slurm_get_root_filter
 * RET uint16_t  - Value of SchedulerRootFilter */
extern uint16_t slurm_get_root_filter(void);

/* slurm_get_sched_params
 * RET char * - Value of SchedulerParameters, MUST be xfreed by caller */
extern char *slurm_get_sched_params(void);

/* slurm_get_sched_port
 * RET uint16_t  - Value of SchedulerPort */
extern uint16_t slurm_get_sched_port(void);

/* slurm_get_slurmd_port
 * returns slurmd port from slurmctld_conf object
 * RET uint16_t	- slurmd port
 */
uint16_t inline slurm_get_slurmd_port(void);

/* slurm_get_slurm_user_id
 * returns slurm uid from slurmctld_conf object
 * RET uint32_t	- slurm user id
 */
uint32_t slurm_get_slurm_user_id(void);

/* slurm_get_slurmd_user_id
 * returns slurmd uid from slurmctld_conf object
 * RET uint32_t	- slurmd user id
 */
uint32_t slurm_get_slurmd_user_id(void);

/* slurm_get_sched_type
 * get sched type from slurmctld_conf object
 * RET char *   - sched type, MUST be xfreed by caller
 */
char *slurm_get_sched_type(void);

/* slurm_get_select_type
 * get select_type from slurmctld_conf object
 * RET char *   - select_type, MUST be xfreed by caller
 */
char *slurm_get_select_type(void);

/* slurm_get_switch_type
 * get switch type from slurmctld_conf object
 * RET char *   - switch type, MUST be xfreed by caller
 */
char *slurm_get_switch_type(void);

/* slurm_get_wait_time
 * returns wait_time from slurmctld_conf object
 * RET uint16_t        - wait_time
 */
uint16_t slurm_get_wait_time(void);

/* slurm_get_srun_prolog
 * return the name of the srun prolog program
 * RET char *   - name of prolog program, must be xfreed by caller
 */
char *slurm_get_srun_prolog(void);

/* slurm_get_srun_epilog
 * return the name of the srun epilog program
 * RET char *   - name of epilog program, must be xfreed by caller
 */
char *slurm_get_srun_epilog(void);

/* slurm_get_task_epilog
 * RET task_epilog name, must be xfreed by caller */
char *slurm_get_task_epilog(void);

/* slurm_get_task_prolog
 * RET task_prolog name, must be xfreed by caller */
char *slurm_get_task_prolog(void);

/* slurm_get_task_plugin
 * RET task_plugin name, must be xfreed by caller */
char *slurm_get_task_plugin(void);

/* slurm_get_task_plugin_param */
uint16_t slurm_get_task_plugin_param(void);

/**********************************************************************\
 * general message management functions used by slurmctld, slurmd
\**********************************************************************/

/* In the socket implementation it creates a socket, binds to it, and
 *	listens for connections.
 *
 * IN port		- port to bind the msg server to
 * RET slurm_fd		- file descriptor of the connection created
 */
slurm_fd inline slurm_init_msg_engine_port(uint16_t port);

/* In the socket implementation it creates a socket, binds to it, and
 *	listens for connections.
 *
 * IN  addr_name        - address to bind the msg server to (NULL means any)
 * IN port		- port to bind the msg server to
 * RET slurm_fd		- file descriptor of the connection created
 */
slurm_fd inline slurm_init_msg_engine_addrname_port(char *addr_name,
						    uint16_t port);

/* In the socket implementation it creates a socket, binds to it, and
 *	listens for connections.
 * IN slurm_address 	- slurm_addr to bind the msg server to
 * RET slurm_fd		- file descriptor of the connection created
 */
slurm_fd inline slurm_init_msg_engine(slurm_addr * slurm_address);

/* In the bsd implmentation maps directly to a accept call
 * IN open_fd		- file descriptor to accept connection on
 * OUT slurm_address 	- slurm_addr of the accepted connection
 * RET slurm_fd		- file descriptor of the connection created
 */
slurm_fd inline slurm_accept_msg_conn(slurm_fd open_fd,
				      slurm_addr * slurm_address);

/* In the bsd implmentation maps directly to a close call, to close
 *	the socket that was accepted
 * IN open_fd		- an open file descriptor to close
 * RET int		- the return code
 */
int inline slurm_close_accepted_conn(slurm_fd open_fd);

/* just calls close on an established msg connection
 * IN open_fd	- an open file descriptor to close
 * RET int	- the return code
 */
int inline slurm_shutdown_msg_engine(slurm_fd open_fd);

/**********************************************************************\
 * receive message functions
\**********************************************************************/

/*
 *  Receive a slurm message on the open slurm descriptor "fd" waiting
 *    at most "timeout" seconds for the message data. If timeout is
 *    zero, a default timeout is used. Memory for the message data
 *    (msg->data) is allocated from within this function, and must be
 *    freed at some point using one of the slurm_free* functions.
 *    Also a slurm_cred is allocated (msg->auth_cred) which must be
 *    freed with g_slurm_auth_destroy() if it exists.
 *
 * IN open_fd	- file descriptor to receive msg on
 * OUT msg	- a slurm_msg struct to be filled in by the function
 * IN timeout	- how long to wait in milliseconds
 * RET int	- returns 0 on success, -1 on failure and sets errno
 */
int slurm_receive_msg(slurm_fd fd, slurm_msg_t *msg, int timeout);

/*
 *  Receive a slurm message on the open slurm descriptor "fd" waiting
 *    at most "timeout" seconds for the message data. If timeout is
 *    zero, a default timeout is used. Memory is allocated for the
 *    returned list and must be freed at some point using the
 *    list_destroy function.
 *
 * IN open_fd	- file descriptor to receive msg on
 * IN steps	- how many steps down the tree we have to wait for
 * IN timeout	- how long to wait in milliseconds
 * RET List	- List containing the responses of the childern (if any) we
 *                forwarded the message to. List containing type
 *                (ret_data_info_t). NULL is returned on failure. and
 *                errno set.
 */
List slurm_receive_msgs(slurm_fd fd, int steps, int timeout);

/*
 *  Receive a slurm message on the open slurm descriptor "fd" waiting
 *    at most "timeout" seconds for the message data. This will also
 *    forward the message to the nodes contained in the forward_t
 *    structure inside the header of the message.  If timeout is
 *    zero, a default timeout is used. The 'resp' is the actual message
 *    received and contains the ret_list of it's childern and the
 *    forward_structure_t containing information about it's childern
 *    also. Memory is allocated for the returned msg and the returned
 *    list both must be freed at some point using the
 *    slurm_free_functions and list_destroy function.
 *
 * IN open_fd	- file descriptor to receive msg on
 * OUT resp	- a slurm_msg struct to be filled in by the function
 * IN timeout	- how long to wait in milliseconds
 * RET int	- returns 0 on success, -1 on failure and sets errno
 */
int slurm_receive_msg_and_forward(slurm_fd fd, slurm_addr *orig_addr,
				  slurm_msg_t *resp, int timeout);

/**********************************************************************\
 * send message functions
\**********************************************************************/

/* sends a message to an arbitrary node
 *
 * IN open_fd		- file descriptor to send msg on
 * IN msg		- a slurm msg struct to be sent
 * RET int		- size of msg sent in bytes
 */
int slurm_send_node_msg(slurm_fd open_fd, slurm_msg_t *msg);

/**********************************************************************\
 * msg connection establishment functions used by msg clients
\**********************************************************************/

/* calls connect to make a connection-less datagram connection to the
 *	primary or secondary slurmctld message engine
 * OUT addr     - address of controller contacted
 * RET slurm_fd	- file descriptor of the connection created
 * IN dest 	- controller to contact, primary or secondary
 */
slurm_fd inline slurm_open_controller_conn(slurm_addr *addr);
slurm_fd inline slurm_open_controller_conn_spec(enum controller_id dest);
/* gets the slurm_addr of the specified controller
 *	primary or secondary slurmctld message engine
 * IN dest      - controller to contact, primary or secondary
 * OUT addr     - slurm_addr to the specified controller
 */
void slurm_get_controller_addr_spec(enum controller_id dest, slurm_addr *addr);

/* In the bsd socket implementation it creates a SOCK_STREAM socket
 *	and calls connect on it a SOCK_DGRAM socket called with connect
 *	is defined to only receive messages from the address/port pair
 *	argument of the connect call slurm_address - for now it is
 *	really just a sockaddr_in
 * IN slurm_address 	- slurm_addr of the connection destination
 * RET slurm_fd		- file descriptor of the connection created
 */
slurm_fd inline slurm_open_msg_conn(slurm_addr * slurm_address);

/* just calls close on an established msg connection to close
 * IN open_fd	- an open file descriptor to close
 * RET int	- the return code
 */
int inline slurm_shutdown_msg_conn(slurm_fd open_fd);


/**********************************************************************\
 * stream functions
\**********************************************************************/

/* slurm_listen_stream
 * opens a stream server and listens on it
 * IN slurm_address 	- slurm_addr to bind the server stream to
 * RET slurm_fd		- file descriptor of the stream created
 */
slurm_fd inline slurm_listen_stream(slurm_addr * slurm_address);

/* slurm_accept_stream
 * accepts a incoming stream connection on a stream server slurm_fd
 * IN open_fd		- file descriptor to accept connection on
 * OUT slurm_address 	- slurm_addr of the accepted connection
 * RET slurm_fd		- file descriptor of the accepted connection
 */
slurm_fd inline slurm_accept_stream(slurm_fd open_fd,
				    slurm_addr * slurm_address);

/* slurm_open_stream
 * opens a client connection to stream server
 * IN slurm_address 	- slurm_addr of the connection destination
 * RET slurm_fd         - file descriptor of the connection created
 */
slurm_fd inline slurm_open_stream(slurm_addr * slurm_address);

/* slurm_close_stream
 * closes either a server or client stream file_descriptor
 * IN open_fd	- an open file descriptor to close
 * RET int	- the return code
 */
int inline slurm_close_stream(slurm_fd open_fd);

/* slurm_write_stream
 * writes a buffer out a stream file descriptor
 * IN open_fd		- file descriptor to write on
 * IN buffer		- buffer to send
 * IN size		- size of buffer send
 * IN timeout		- how long to wait in milliseconds
 * RET size_t		- bytes sent , or -1 on errror
 */
size_t inline slurm_write_stream(slurm_fd open_fd, char *buffer,
				 size_t size);
size_t inline slurm_write_stream_timeout(slurm_fd open_fd,
					 char *buffer, size_t size,
					 int timeout);

/* slurm_read_stream
 * read into buffer grom a stream file descriptor
 * IN open_fd		- file descriptor to read from
 * OUT buffer	- buffer to receive into
 * IN size		- size of buffer
 * IN timeout		- how long to wait in milliseconds
 * RET size_t		- bytes read , or -1 on errror
 */
size_t inline slurm_read_stream(slurm_fd open_fd, char *buffer,
				size_t size);
size_t inline slurm_read_stream_timeout(slurm_fd open_fd,
					char *buffer, size_t size,
					int timeout);

/* slurm_get_stream_addr
 * esentially a encapsilated get_sockname
 * IN open_fd 		- file descriptor to retreive slurm_addr for
 * OUT address		- address that open_fd to bound to
 */
int inline slurm_get_stream_addr(slurm_fd open_fd, slurm_addr * address);

/* make an open slurm connection blocking or non-blocking
 *	(i.e. wait or do not wait for i/o completion )
 * IN open_fd	- an open file descriptor to change the effect
 * RET int	- the return code
 */
int inline slurm_set_stream_non_blocking(slurm_fd open_fd);
int inline slurm_set_stream_blocking(slurm_fd open_fd);

/**********************************************************************\
 * address conversion and management functions
\**********************************************************************/

/* slurm_set_addr_uint
 * initializes the slurm_address with the supplied port and ip_address
 * OUT slurm_address	- slurm_addr to be filled in
 * IN port		- port in host order
 * IN ip_address	- ipv4 address in uint32 host order form
 */
void inline slurm_set_addr_uint(slurm_addr * slurm_address,
				uint16_t port, uint32_t ip_address);

/* reset_slurm_addr
 * resets the address field of a slurm_addr, port and family unchanged
 * OUT slurm_address	- slurm_addr to be reset in
 * IN new_address	- source of address to write into slurm_address
 */
void reset_slurm_addr(slurm_addr * slurm_address, slurm_addr new_address);

/* slurm_set_addr
 * initializes the slurm_address with the supplied port and ip_address
 * OUT slurm_address	- slurm_addr to be filled in
 * IN port		- port in host order
 * IN host		- hostname or dns name
 */
void inline slurm_set_addr(slurm_addr * slurm_address,
			   uint16_t port, char *host);

/* slurm_set_addr_any
 * initialized the slurm_address with the supplied port on INADDR_ANY
 * OUT slurm_address	- slurm_addr to be filled in
 * IN port		- port in host order
 */
void inline slurm_set_addr_any(slurm_addr * slurm_address, uint16_t port);

/* slurm_set_addr_char
 * initializes the slurm_address with the supplied port and host
 * OUT slurm_address	- slurm_addr to be filled in
 * IN port		- port in host order
 * IN host		- hostname or dns name
 */
void inline slurm_set_addr_char(slurm_addr * slurm_address,
				uint16_t port, char *host);

/* slurm_get_addr
 * given a slurm_address it returns to port and hostname
 * IN slurm_address	- slurm_addr to be queried
 * OUT port		- port number
 * OUT host		- hostname
 * IN buf_len		- length of hostname buffer
 */
void inline slurm_get_addr(slurm_addr * slurm_address,
			   uint16_t * port, char *host, uint32_t buf_len);

/* slurm_get_ip_str
 * given a slurm_address it returns its port and ip address string
 * IN slurm_address	- slurm_addr to be queried
 * OUT port		- port number
 * OUT ip		- ip address in dotted-quad string form
 * IN buf_len		- length of ip buffer
 */
void inline slurm_get_ip_str(slurm_addr * slurm_address, uint16_t * port,
			     char *ip, unsigned int buf_len);

/* slurm_get_peer_addr
 * get the slurm address of the peer connection, similar to getpeeraddr
 * IN fd		- an open connection
 * OUT slurm_address	- place to park the peer's slurm_addr
 */
int inline slurm_get_peer_addr(slurm_fd fd, slurm_addr * slurm_address);

/* slurm_print_slurm_addr
 * prints a slurm_addr into a buf
 * IN address		- slurm_addr to print
 * IN buf		- space for string representation of slurm_addr
 * IN n			- max number of bytes to write (including NUL)
 */
void inline slurm_print_slurm_addr(slurm_addr * address,
				   char *buf, size_t n);

/**********************************************************************\
 * slurm_addr pack routines
\**********************************************************************/

Buf slurm_pack_msg_no_header(slurm_msg_t * msg);

/* slurm_pack_slurm_addr
 * packs a slurm_addr into a buffer to serialization transport
 * IN slurm_address	- slurm_addr to pack
 * IN/OUT buffer	- buffer to pack the slurm_addr into
 */
void inline slurm_pack_slurm_addr(slurm_addr * slurm_address, Buf buffer);

/* slurm_pack_slurm_addr
 * unpacks a buffer into a slurm_addr after serialization transport
 * OUT slurm_address	- slurm_addr to unpack to
 * IN/OUT buffer	- buffer to upack the slurm_addr from
 * returns 		- SLURM error code
 */
int inline slurm_unpack_slurm_addr_no_alloc(slurm_addr * slurm_address,
					    Buf buffer);

/* slurm_pack_slurm_addr_array
 * packs an array of slurm_addrs into a buffer
 * OUT slurm_address	- slurm_addr to pack
 * IN size_val  	- how many to pack
 * IN/OUT buffer	- buffer to pack the slurm_addr from
 * returns		- SLURM error code
 */
void inline slurm_pack_slurm_addr_array(slurm_addr * slurm_address,
					uint32_t size_val, Buf buffer);
/* slurm_unpack_slurm_addr_array
 * unpacks an array of slurm_addrs from a buffer
 * OUT slurm_address	- slurm_addr to unpack to
 * IN size_val  	- how many to unpack
 * IN/OUT buffer	- buffer to upack the slurm_addr from
 * returns		- SLURM error code
 */
int inline slurm_unpack_slurm_addr_array(slurm_addr ** slurm_address,
					 uint32_t * size_val, Buf buffer);

/**********************************************************************\
 * simplified communication routines
 * They open a connection do work then close the connection all within
 * the function
\**********************************************************************/

/* slurm_send_rc_msg
 * given the original request message this function sends a
 *	slurm_return_code message back to the client that made the request
 * IN request_msg	- slurm_msg the request msg
 * IN rc 		- the return_code to send back to the client
 */
int slurm_send_rc_msg(slurm_msg_t * request_msg, int rc);

/* slurm_send_recv_controller_msg
 * opens a connection to the controller, sends the controller a message,
 * listens for the response, then closes the connection
 * IN request_msg	- slurm_msg request
 * OUT response_msg	- slurm_msg response
 * RET int 		- returns 0 on success, -1 on failure and sets errno
 */
int slurm_send_recv_controller_msg(slurm_msg_t * request_msg,
				   slurm_msg_t * response_msg);

/* slurm_send_recv_node_msg
 * opens a connection to node,
 * and sends the nodes a message, listens
 * for the response, then closes the connections
 * IN request_msg	- slurm_msg request
 * OUT response_msg	- slurm_msg response
 * RET int 		- returns 0 on success, -1 on failure and sets errno
 */
int slurm_send_recv_node_msg(slurm_msg_t * request_msg,
			     slurm_msg_t * response_msg,
			     int timeout);

/*
 *  Send a message to the nodelist specificed using fanout
 *    Then return List containing type (ret_data_info_t).
 * IN nodelist	    - list of nodes to send to.
 * IN msg           - a slurm_msg struct to be sent by the function
 * IN timeout	    - how long to wait in milliseconds
 * IN quiet       - if set, reduce logging details
 * RET List	    - List containing the responses of the childern
 *                    (if any) we forwarded the message to. List
 *                    containing type (ret_types_t).
 */
List slurm_send_recv_msgs(const char *nodelist, slurm_msg_t *msg, int timeout,
			  bool quiet);

/*
 *  Send a message to msg->address
 *    Then return List containing type (ret_data_info_t).
 * IN msg           - a slurm_msg struct to be sent by the function
 * IN name          - the name of the node the message is being sent to
 * IN timeout	    - how long to wait in milliseconds
 * RET List	    - List containing the responses of the childern
 *                    (if any) we forwarded the message to. List
 *                    containing type (ret_types_t).
 */
List slurm_send_addr_recv_msgs(slurm_msg_t *msg, char *name, int timeout);

/*
 *  Same as above, but only to one node
 *  returns 0 on success, -1 on failure and sets errno
 */

int slurm_send_recv_rc_msg_only_one(slurm_msg_t *req, int *rc, int timeout);

/*
 *  Same as above, but send to controller
 *  returns 0 on success, -1 on failure and sets errno
 */
int slurm_send_recv_controller_rc_msg(slurm_msg_t *req, int *rc);

/* slurm_send_only_controller_msg
 * opens a connection to the controller, sends the node a message then,
 * closes the connection
 * IN request_msg	- slurm_msg request
 * RET int 		- return code
 */
int slurm_send_only_controller_msg(slurm_msg_t * request_msg);

/* slurm_send_only_node_msg
 * opens a connection to node, sends the node a message then,
 * closes the connection
 * IN request_msg	- slurm_msg request
 * RET int 		- return code
 */
int slurm_send_only_node_msg(slurm_msg_t * request_msg);

/* Slurm message functions */

/* set_span
 * build an array indicating how message fanout should occur
 * IN total - total number of nodes to communicate with
 * IN tree_width - message fanout, use system default if zero
 * NOTE: Returned array MUST be release by caller using xfree */
extern int *set_span(int total, uint16_t tree_width);

extern void slurm_free_msg(slurm_msg_t * msg);

/* must free this memory with free not xfree */
extern char *nodelist_nth_host(const char *nodelist, int inx);
extern int nodelist_find(const char *nodelist, const char *name);
extern void convert_num_unit(float num, char *buf, int buf_size, int orig_type);
extern int revert_num_unit(const char *buf);

/*
 * slurm_job_step_create - Ask the slurm controller for a new job step
 *	credential.
 * IN slurm_step_alloc_req_msg - description of job step request
 * OUT slurm_step_alloc_resp_msg - response to request
 * RET 0 on success, otherwise return -1 and set errno to indicate the error
 * NOTE: free the response using slurm_free_job_step_create_response_msg
 */
extern int slurm_job_step_create (
	job_step_create_request_msg_t *slurm_step_alloc_req_msg,
	job_step_create_response_msg_t **slurm_step_alloc_resp_msg);
#endif