diff -up nfs-utils-1.3.0/configure.ac.orig nfs-utils-1.3.0/configure.ac
--- nfs-utils-1.3.0/configure.ac.orig	2017-03-28 13:43:36.000000000 -0400
+++ nfs-utils-1.3.0/configure.ac	2017-03-28 13:43:53.000000000 -0400
@@ -23,6 +23,12 @@ AC_ARG_WITH(statedir,
 	statedir=$withval,
 	statedir=/var/lib/nfs)
 	AC_SUBST(statedir)
+AC_ARG_WITH(nfsconfig,
+	[AC_HELP_STRING([--with-nfsconfig=/config/file],
+			[use general config file /config/file @<:@default=/etc/nfs.conf@:>@])],
+	nfsconfig=$withval,
+	nfsconfig=/etc/nfs.conf)
+	AC_SUBST(nfsconfig)
 AC_ARG_WITH(statdpath,
 	[AC_HELP_STRING([--with-statdpath=/foo],
 			[define the statd state dir as /foo instead of the NFS statedir @<:@default=/var/lib/nfs@:>@])],
@@ -442,6 +448,7 @@ dnl Export some path names to config.h
 dnl *************************************************************
 AC_DEFINE_UNQUOTED(NFS_STATEDIR, "$statedir", [This defines the location of the NFS state files. Warning: this must match definitions in config.mk!])
 AC_DEFINE_UNQUOTED(NSM_DEFAULT_STATEDIR, "$statdpath", [Define this to the pathname where statd keeps its state file])
+AC_DEFINE_UNQUOTED(NFS_CONFFILE, "$nfsconfig", [This defines the location of NFS daemon config file])
 
 if test "x$cross_compiling" = "xno"; then
 	CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-"$CFLAGS"}
diff -up nfs-utils-1.3.0/support/include/conffile.h.orig nfs-utils-1.3.0/support/include/conffile.h
--- nfs-utils-1.3.0/support/include/conffile.h.orig	2014-03-25 11:12:07.000000000 -0400
+++ nfs-utils-1.3.0/support/include/conffile.h	2017-03-28 13:43:53.000000000 -0400
@@ -35,6 +35,8 @@
 
 #include <sys/queue.h>
 #include <ctype.h>
+#include <stdint.h>
+#include <stdbool.h>
 
 struct conf_list_node {
 	TAILQ_ENTRY(conf_list_node) link;
@@ -56,6 +58,7 @@ extern struct sockaddr *conf_get_address
 extern struct conf_list *conf_get_list(char *, char *);
 extern struct conf_list *conf_get_tag_list(char *, char *);
 extern int      conf_get_num(char *, char *, int);
+extern _Bool    conf_get_bool(char *, char *, _Bool);
 extern char    *conf_get_str(char *, char *);
 extern char    *conf_get_section(char *, char *, char *);
 extern void     conf_init(void);
diff -up nfs-utils-1.3.0/support/include/xlog.h.orig nfs-utils-1.3.0/support/include/xlog.h
--- nfs-utils-1.3.0/support/include/xlog.h.orig	2014-03-25 11:12:07.000000000 -0400
+++ nfs-utils-1.3.0/support/include/xlog.h	2017-03-28 13:43:53.000000000 -0400
@@ -41,6 +41,7 @@ void			xlog_stderr(int on);
 void			xlog_syslog(int on);
 void			xlog_config(int fac, int on);
 void			xlog_sconfig(char *, int on);
+void			xlog_from_conffile(char *);
 int			xlog_enabled(int fac);
 void			xlog(int fac, const char *fmt, ...);
 void			xlog_warn(const char *fmt, ...);
diff -up nfs-utils-1.3.0/support/nfs/conffile.c.orig nfs-utils-1.3.0/support/nfs/conffile.c
--- nfs-utils-1.3.0/support/nfs/conffile.c.orig	2014-03-25 11:12:07.000000000 -0400
+++ nfs-utils-1.3.0/support/nfs/conffile.c	2017-03-28 13:43:53.000000000 -0400
@@ -52,6 +52,7 @@
 #pragma GCC visibility push(hidden)
 
 static void conf_load_defaults(void);
+static int conf_load(int trans, char *path);
 static int conf_set(int , char *, char *, char *, 
 	char *, int , int );
 
@@ -107,8 +108,6 @@ struct conf_binding {
 char *conf_path;
 LIST_HEAD (conf_bindings, conf_binding) conf_bindings[256];
 
-static char *conf_addr;
-
 static __inline__ u_int8_t
 conf_hash(char *s)
 {
@@ -213,7 +212,7 @@ static void
 conf_parse_line(int trans, char *line, size_t sz)
 {
 	char *val, *ptr;
-	size_t i, valsize;
+	size_t i;
 	size_t j;
 	static char *section = 0;
 	static char *arg = 0;
@@ -300,18 +299,32 @@ conf_parse_line(int trans, char *line, s
 			}
 			line[strcspn (line, " \t=")] = '\0';
 			val = line + i + 1 + strspn (line + i + 1, " \t");
-			valsize = 0;
-			while (val[valsize++]);
 
-			/* Skip trailing spaces and comments */
-			for (j = 0; j < valsize; j++) {
-				if (val[j] == '#' || val[j] == ';' || isspace(val[j])) {
-					val[j] = '\0';
-					break;
+			if (val[0] == '"') {
+				val ++;
+				j = strcspn(val, "\"");
+				val[j] = 0;
+			} else if (val[0] == '\'') {
+				val ++;
+				j = strcspn(val, "'");
+				val[j] = 0;
+			} else {
+				/* Skip trailing spaces and comments */
+				for (j = 0; val[j]; j++) {
+					if ((val[j] == '#' || val[j] == ';')
+					    && (j == 0 || isspace(val[j-1]))) {
+						val[j] = '\0';
+						break;
+					}
 				}
+				while (j && isspace(val[j-1]))
+					val[--j] = '\0';
 			}
-			/* XXX Perhaps should we not ignore errors?  */
-			conf_set(trans, section, arg, line, val, 0, 0);
+			if (strcasecmp(line, "include") == 0)
+				conf_load(trans, val);
+			else
+				/* XXX Perhaps should we not ignore errors?  */
+				conf_set(trans, section, arg, line, val, 0, 0);
 			return;
 		}
 	}
@@ -368,23 +381,18 @@ conf_init (void)
 	conf_reinit();
 }
 
-/* Open the config file and map it into our address space, then parse it.  */
-void
-conf_reinit(void)
+static int
+conf_load(int trans, char *path)
 {
-	struct conf_binding *cb = 0;
-	int fd, trans;
-	unsigned int i;
-	size_t sz;
-	char *new_conf_addr = 0;
 	struct stat sb;
+	if ((stat (path, &sb) == 0) || (errno != ENOENT)) {
+		char *new_conf_addr;
+		size_t sz = sb.st_size;
+		int fd = open (path, O_RDONLY, 0);
 
-	if ((stat (conf_path, &sb) == 0) || (errno != ENOENT)) {
-		sz = sb.st_size;
-		fd = open (conf_path, O_RDONLY, 0);
 		if (fd == -1) {
-			xlog_warn("conf_reinit: open (\"%s\", O_RDONLY) failed", conf_path);
-			return;
+			xlog_warn("conf_reinit: open (\"%s\", O_RDONLY) failed", path);
+			return -1;
 		}
 
 		new_conf_addr = malloc(sz);
@@ -396,39 +404,46 @@ conf_reinit(void)
 		/* XXX I assume short reads won't happen here.  */
 		if (read (fd, new_conf_addr, sz) != (int)sz) {
 			xlog_warn("conf_reinit: read (%d, %p, %lu) failed",
-   				fd, new_conf_addr, (unsigned long)sz);
+				fd, new_conf_addr, (unsigned long)sz);
 			goto fail;
 		}
 		close(fd);
 
-		trans = conf_begin();
 		/* XXX Should we not care about errors and rollback?  */
 		conf_parse(trans, new_conf_addr, sz);
+		free(new_conf_addr);
+		return 0;
+	fail:
+		close(fd);
+		free(new_conf_addr);
 	}
-	else
-		trans = conf_begin();
+	return -1;
+}
+
+/* Open the config file and map it into our address space, then parse it.  */
+void
+conf_reinit(void)
+{
+	struct conf_binding *cb = 0;
+	int trans;
+	unsigned int i;
+
+	trans = conf_begin();
+	if (conf_load(trans, conf_path) < 0)
+		return;
 
 	/* Load default configuration values.  */
 	conf_load_defaults();
 
 	/* Free potential existing configuration.  */
-	if (conf_addr) {
-		for (i = 0; i < sizeof conf_bindings / sizeof conf_bindings[0]; i++) {
-			cb = LIST_FIRST (&conf_bindings[i]);
-			for (; cb; cb = LIST_FIRST (&conf_bindings[i]))
-				conf_remove_now(cb->section, cb->tag);
-		}
-		free (conf_addr);
+	for (i = 0; i < sizeof conf_bindings / sizeof conf_bindings[0]; i++) {
+		cb = LIST_FIRST (&conf_bindings[i]);
+		for (; cb; cb = LIST_FIRST (&conf_bindings[i]))
+			conf_remove_now(cb->section, cb->tag);
 	}
 
 	conf_end(trans, 1);
-	conf_addr = new_conf_addr;
 	return;
-
-fail:
-	if (new_conf_addr)
-		free(new_conf_addr);
-	close (fd);
 }
 
 /*
@@ -446,6 +461,38 @@ conf_get_num(char *section, char *tag, i
 	return def;
 }
 
+/*
+ * Return the Boolean value denoted by TAG in section SECTION, or DEF
+ * if that tags does not exist.
+ * FALSE is returned for case-insensitve comparisons with 0, f, false, n, no, off
+ * TRUE is returned for 1, t, true, y, yes, on
+ * A failure to match one of these results in DEF
+ */
+_Bool
+conf_get_bool(char *section, char *tag, _Bool def)
+{
+	char *value = conf_get_str(section, tag);
+
+	if (!value)
+		return def;
+	if (strcasecmp(value, "1") == 0 ||
+	    strcasecmp(value, "t") == 0 ||
+	    strcasecmp(value, "true") == 0 ||
+	    strcasecmp(value, "y") == 0 ||
+	    strcasecmp(value, "yes") == 0 ||
+	    strcasecmp(value, "on") == 0)
+		return true;
+
+	if (strcasecmp(value, "0") == 0 ||
+	    strcasecmp(value, "f") == 0 ||
+	    strcasecmp(value, "false") == 0 ||
+	    strcasecmp(value, "n") == 0 ||
+	    strcasecmp(value, "no") == 0 ||
+	    strcasecmp(value, "off") == 0)
+		return false;
+	return def;
+}
+
 /* Validate X according to the range denoted by TAG in section SECTION.  */
 int
 conf_match_num(char *section, char *tag, int x)
@@ -476,12 +523,24 @@ char *
 conf_get_str(char *section, char *tag)
 {
 	struct conf_binding *cb;
-
+retry:
 	cb = LIST_FIRST (&conf_bindings[conf_hash (section)]);
 	for (; cb; cb = LIST_NEXT (cb, link)) {
 		if (strcasecmp (section, cb->section) == 0
-				&& strcasecmp (tag, cb->tag) == 0)
+		    && strcasecmp (tag, cb->tag) == 0) {
+			if (cb->value[0] == '$') {
+				/* expand $name from [environment] section,
+				 * or from environment
+				 */
+				char *env = getenv(cb->value+1);
+				if (env && *env)
+					return env;
+				section = "environment";
+				tag = cb->value + 1;
+				goto retry;
+			}
 			return cb->value;
+		}
 	}
 	return 0;
 }
@@ -705,6 +764,8 @@ conf_set(int transaction, char *section,
 {
 	struct conf_trans *node;
 
+	if (!value || !*value)
+		return 0;
 	node = conf_trans_node(transaction, CONF_SET);
 	if (!node)
 		return 1;
diff -up nfs-utils-1.3.0/support/nfs/xlog.c.orig nfs-utils-1.3.0/support/nfs/xlog.c
--- nfs-utils-1.3.0/support/nfs/xlog.c.orig	2014-03-25 11:12:07.000000000 -0400
+++ nfs-utils-1.3.0/support/nfs/xlog.c	2017-03-28 13:43:53.000000000 -0400
@@ -29,6 +29,7 @@
 #include <syslog.h>
 #include <errno.h>
 #include "nfslib.h"
+#include "conffile.h"
 
 #undef	VERBOSE_PRINTF
 
@@ -125,6 +126,19 @@ xlog_sconfig(char *kind, int on)
 	xlog_config(tbl->df_fac, on);
 }
 
+void
+xlog_from_conffile(char *service)
+{
+	struct conf_list *kinds;
+	struct conf_list_node *n;
+
+	kinds = conf_get_list(service, "debug");
+	if (!kinds || !kinds->cnt)
+		return;
+	TAILQ_FOREACH(n, &(kinds->fields), link)
+		xlog_sconfig(n->field, 1);
+}
+
 int
 xlog_enabled(int fac)
 {
diff -up nfs-utils-1.3.0/systemd/Makefile.am.orig nfs-utils-1.3.0/systemd/Makefile.am
--- nfs-utils-1.3.0/systemd/Makefile.am.orig	2017-03-28 13:43:36.000000000 -0400
+++ nfs-utils-1.3.0/systemd/Makefile.am	2017-03-28 13:43:53.000000000 -0400
@@ -20,7 +20,9 @@ unit_files =  \
     proc-fs-nfsd.mount \
     var-lib-nfs-rpc_pipefs.mount
 
-EXTRA_DIST = $(unit_files)
+man5_MANS	= nfs.conf.man
+man7_MANS	= nfs.systemd.man
+EXTRA_DIST = $(unit_files) $(man5_MANS) $(man7_MANS)
 
 unit_dir = /usr/lib/systemd/system
 
diff -up nfs-utils-1.3.0/systemd/nfs.conf.man.orig nfs-utils-1.3.0/systemd/nfs.conf.man
--- nfs-utils-1.3.0/systemd/nfs.conf.man.orig	2017-03-28 13:43:53.000000000 -0400
+++ nfs-utils-1.3.0/systemd/nfs.conf.man	2017-03-28 13:43:53.000000000 -0400
@@ -0,0 +1,231 @@
+.TH NFS.CONF 5
+.SH NAME
+nfs.conf \- general configuration for NFS daemons and tools
+.SH SYNOPSIS
+.I /etc/nfs.conf
+.SH DESCRIPTION
+.PP
+This file contains site-specific configuration for various NFS daemons
+and other processes.  Most configuration can also be passed to
+processes via command line arguments, but it can be more convenient to
+have a central file.  In particular, this encourages consistent
+configuration across different processes.
+.PP
+When command line options are provided, they override values set in
+this file.  When this file does not specify a particular parameter,
+and no command line option is provided, each tool provides its own
+default values.
+.PP
+The file format supports multiple sections, each of which can contain
+multiple value assignments.  A section is introduced by a line
+containing the section name enclosed in square brackets, so
+.RS
+.B [global]
+.RE
+would introduce a section called
+.BR global .
+A value assignment is a single line that has the name of the value, an
+equals sign, and a setting for the value, so
+.RS
+.B threads = 4
+.RE
+would set the value named
+.B threads
+in the current section to
+.BR 4 .
+Leading and trailing spaces and tab
+are ignored, as are spaces and tabs surrounding the equals sign.
+Single and double quotes surrounding the assigned value are also
+removed.  If the resulting string is empty, the whole assignment
+is ignored.
+.PP
+Any line starting with
+.RB \*(lq # \*(rq
+or
+.RB \*(lq ; \*(rq
+is ignored, as is any blank line.
+.PP
+If the assigned value started with a
+.RB \*(lq $ \*(rq
+then the remainder is treated as a name and looked for in the section
+.B [environment]
+or in the processes environment (see
+.BR environ (7)).
+The value found is used for this value.
+.PP
+The value name
+.B include
+is special.  If a section contains
+.RS
+.B include = /some/file/name
+.RE
+then the named file will be read, and any value assignments found
+there-in will be added to the current section.  If the file contains
+section headers, then new sections will be created just as if the
+included file appeared in place of the
+.B include
+line.
+.PP
+Lookup of section and value names is case-insensitive.
+
+Where a Boolean value is expected, any of
+.BR true ,
+.BR t ,
+.BR yes ,
+.BR y ,
+.BR on ", or"
+.B 1
+can be used for "true", while
+.BR false ,
+.BR f ,
+.BR no ,
+.BR n ,
+.BR off ", or"
+.B 0
+can be used for "false".  Comparisons are case-insensitive.
+
+.SH SECTIONS
+The following sections are known to various programs, and can contain
+the given named values.  Most sections can also contain a
+.B debug
+value, which can be one or more from the list
+.BR general ,
+.BR call ,
+.BR auth ,
+.BR parse ,
+.BR all .
+When a list is given, the members should be comma-separated.
+.TP
+.B nfsdcltrack
+Recognized values:
+.BR storagedir .
+
+The
+.B nfsdcltrack
+program is run directly by the Linux kernel and there is no
+opportunity to provide command line arguments, so the configuration
+file is the only way to configure this program.  See
+.BR nfsdcltrack (8)
+for details.
+
+.TP
+.B nfsd
+Recognized values:
+.BR threads ,
+.BR host ,
+.BR port ,
+.BR grace-time ,
+.BR lease-time ,
+.BR udp ,
+.BR tcp ,
+.BR vers2 ,
+.BR vers3 ,
+.BR vers4 ,
+.BR vers4.0 ,
+.BR vers4.1 ,
+.BR vers4.2 ,
+.BR rdma .
+
+Version and protocol values are Boolean values as described above,
+and are also used by
+.BR rpc.mountd .
+Threads and the two times are integers.
+.B port
+and
+.B rdma
+are service names or numbers.  See
+.BR rpc.nfsd (8)
+for details.
+
+.TP
+.B mountd
+Recognized values:
+.BR manage-gids ,
+.BR descriptors ,
+.BR port ,
+.BR threads ,
+.BR reverse-lookup ,
+.BR state-directory-path ,
+.BR ha-callout .
+
+These, together with the protocol and version values in the
+.B [nfsd]
+section, are used to configure mountd.  See
+.BR rpc.mountd (8)
+for details.
+
+.TP
+.B statd
+Recognized values:
+.BR port ,
+.BR outgoing-port ,
+.BR name ,
+.BR state-directory-path ,
+.BR ha-callout .
+
+See
+.BR rpc.statd (8)
+for details.
+
+.TP
+.B lockd
+Recognized values:
+.B port
+and
+.BR udp-port .
+
+See
+.BR rpc.statd (8)
+for details.
+
+.TP
+.B sm-notify
+Recognized values:
+.BR retry-time ,
+.BR outgoing-port ", and"
+.BR outgoing-addr .
+
+See
+.BR sm-notify (8)
+for details.
+
+.TP
+.B gssd
+Recognized values:
+.BR use-memcache ,
+.BR use-machine-creds ,
+.BR avoid-dns ,
+.BR limit-to-legacy-enctypes ,
+.BR context-timeout ,
+.BR rpc-timeout ,
+.BR pipefs-directory ,
+.BR keytab-file ,
+.BR cred-cache-directory ,
+.BR preferred-realm .
+
+See
+.BR rpc.gssd (8)
+for details.
+
+.TP
+.B svcgssd
+Recognized values:
+.BR principal .
+
+See
+.BR rpc.svcgssd (8)
+for details.
+
+.TP
+.B exportfs
+Only
+.B debug=
+is recognized.
+
+.SH FILES
+.I /etc/nfs.conf
+.SH SEE ALSO
+.BR nfsdcltrack (8),
+.BR rpc.nfsd (8),
+.BR rpc.mountd (8),
+.BR nfsmount.conf (5).
diff -up nfs-utils-1.3.0/systemd/nfs.systemd.man.orig nfs-utils-1.3.0/systemd/nfs.systemd.man
--- nfs-utils-1.3.0/systemd/nfs.systemd.man.orig	2017-03-28 13:45:11.000000000 -0400
+++ nfs-utils-1.3.0/systemd/nfs.systemd.man	2017-03-28 13:45:11.000000000 -0400
@@ -0,0 +1,167 @@
+.TH NFS.SYSTEMD 7
+.SH NAME
+nfs.systemd \- managing NFS services through systemd.
+.SH SYNOPSIS
+nfs-utils.service
+.br
+nfs-server.service
+.br
+nfs-client.target
+.br
+.I etc
+.SH DESCRIPTION
+The
+.I nfs-utils
+package provides a suite of
+.I systemd
+unit files which allow the various services to be started and
+managed.  These unit files ensure that the services are started in the
+correct order, and the prerequisites are active before dependant
+services start.  As there are quite  few unit files, it is not
+immediately obvious how best to achieve certain results.  The
+following subsections attempt to cover the issues that are most likely
+to come up.
+.SS Configuration
+The standard systemd unit files do not provide any easy way to pass
+any command line arguments to daemons so as to configure their
+behavior.  In many case such configuration can be performed by making
+changes to
+.I /etc/nfs.conf
+or other configuration files.  When that is not convenient, a
+distribution might provide systemd "drop-in" files which replace the
+.B ExecStart=
+setting to start the program with different arguments.  For example a
+drop-in file
+.B systemd/system/nfs-mountd.service.d/local.conf
+containing
+.RS
+.nf
+[Service]
+EnvironmentFile=/etc/sysconfig/nfs
+ExecStart=
+ExecStart= /usr/sbin/rpc.mountd $RPCMOUNTDOPTS
+.fi
+.RE
+would cause the
+.B nfs-mountd.service
+unit to run the
+.I rpc.mountd
+program using, for arguments, the value given for
+.B RPCMOUNTDOPTS
+in
+.IR /etc/sysconfig/nfs .
+This allows for seamless integration with existing configuration
+tools.
+.SS Enabling unit files
+There are three unit files which are designed to be manually enabled.
+All others are automatically run as required.  The three are:
+.TP
+.B nfs-client.target
+This should be enabled on any host which ever serves as an NFS client.
+There is little cost in transparently enabling it whenever NFS client
+software is installed.
+.TP
+.B nfs-server.service
+This must be enabled to provide NFS service to clients.  It starts and
+configures the required daemons in the required order.
+.TP
+.B nfs-blkmap.service
+The
+.B blkmapd
+daemon is only required on NFS clients which are using pNFS (parallel
+NFS), and particularly using the
+.B blocklayout
+layout protocol.  If you might use this particular extension to NFS,
+the
+.B nfs-blkmap.service
+unit should be enabled.
+.PP
+Several other units which might be considered to be optional, such as
+.I rpc-gssd.service
+are careful to only start if the required configuration file exists.
+.I rpc-gsdd.service
+will not start if the
+.I krb5.keytab
+file does not exist (typically in
+.IR /etc ).
+.SS Restarting NFS services
+Most NFS daemons can be restarted at any time.  They will reload any
+state that they need, and continue servicing requests.  This is rarely
+necessary though.
+.PP
+When configuration changesare make, it can be hard to know exactly
+which services need to be restarted to ensure that the configuration
+takes effect.  The simplest approach, which is often the best, is to
+restart everything.  To help with this, the
+.B nfs-utils.service
+unit is provided.  It declares appropriate dependencies with other
+unit files so that
+.RS
+.B systemctl restart nfs-utils
+.RE
+will restart all NFS daemons that are running.  This will cause all
+configuration changes to take effect
+.I except
+for changes to mount options lists in
+.I /etc/fstab
+or
+.IR /etc/nfsmount.conf .
+Mount options can only be changed by unmounting and remounting
+filesystem.  This can be a disruptive operation so it should only be
+done when the value justifies the cost.  The command
+.RS
+.B umount -a -t nfs; mount -a -t nfs
+.RE
+should unmount and remount all NFS filesystems.
+.SS Masking unwanted services
+Rarely there may be a desire to prohibit some services from running
+even though there are normally part of a working NFS system.  This may
+be needed to reduce system load to an absolute minimum, or to reduce
+attack surface by not running daemons that are not absolutely
+required.
+.PP
+Two particular services which this can apply to are
+.I rpcbind
+and
+.IR idmapd .
+.I rpcbind
+is not part of the
+.I nfs-utils
+package, but it used by several NFS services.  However it is
+.B not
+needed when only NFSv4 is in use.  If a site will never use NFSv3 (or
+NFSv2) and does not want
+.I rpcbind
+to be running, the correct approach is to run
+.RS
+.B systemctl mask rpcbind
+.RE
+This will disable
+.IR rpcbind ,
+and the various NFS services which depend on it (and are only needed
+for NFSv3) will refuse to start, without interfering with the
+operation of NFSv4 services.  In particular,
+.I rpc.statd
+will not run when
+.I rpcbind
+is masked.
+.PP
+.I idmapd
+is only needed for NFSv4, and even then is not needed when the client
+and server agree to use user-ids rather than user-names to identify the
+owners of files.  If
+.I idmapd
+is not needed and not wanted, it can be masked with
+.RS
+.B systemctl mask idmapd
+.RE
+.SH FILES
+/etc/nfs.conf
+.br
+/etc/nfsmount.conf
+.br
+/etc/idmapd.conf
+.SH SEE ALSO
+.BR systemd.unit (5),
+.BR nfs.conf (5),
+.BR nfsmount.conf (5).
diff -up nfs-utils-1.3.0/systemd/rpc-statd.service.orig nfs-utils-1.3.0/systemd/rpc-statd.service
--- nfs-utils-1.3.0/systemd/rpc-statd.service.orig	2017-03-28 13:43:36.000000000 -0400
+++ nfs-utils-1.3.0/systemd/rpc-statd.service	2017-03-28 13:43:53.000000000 -0400
@@ -11,7 +11,8 @@ Wants=nfs-config.service
 After=nfs-config.service
 
 [Service]
+Environment=RPC_STATD_NO_NOTIFY=1
 EnvironmentFile=-/run/sysconfig/nfs-utils
 Type=forking
 PIDFile=/var/run/rpc.statd.pid
-ExecStart=/usr/sbin/rpc.statd --no-notify $STATDARGS
+ExecStart=/usr/sbin/rpc.statd $STATDARGS
diff -up nfs-utils-1.3.0/utils/exportfs/exportfs.c.orig nfs-utils-1.3.0/utils/exportfs/exportfs.c
--- nfs-utils-1.3.0/utils/exportfs/exportfs.c.orig	2017-03-28 13:43:36.000000000 -0400
+++ nfs-utils-1.3.0/utils/exportfs/exportfs.c	2017-03-28 13:43:53.000000000 -0400
@@ -37,6 +37,7 @@
 #include "nfslib.h"
 #include "exportfs.h"
 #include "xlog.h"
+#include "conffile.h"
 
 static void	export_all(int verbose);
 static void	exportfs(char *arg, char *options, int verbose);
@@ -53,6 +54,7 @@ static void release_lockfile(void);
 
 static const char *lockfile = EXP_LOCKFILE;
 static int _lockfd = -1;
+char *conf_path = NFS_CONFFILE;
 
 /*
  * If we aren't careful, changes made by exportfs can be lost
@@ -108,6 +110,9 @@ main(int argc, char **argv)
 	xlog_stderr(1);
 	xlog_syslog(0);
 
+	conf_init();
+	xlog_from_conffile("exportfs");
+
 	while ((c = getopt(argc, argv, "ad:fhio:ruvs")) != EOF) {
 		switch(c) {
 		case 'a':
diff -up nfs-utils-1.3.0/utils/exportfs/exportfs.man.orig nfs-utils-1.3.0/utils/exportfs/exportfs.man
--- nfs-utils-1.3.0/utils/exportfs/exportfs.man.orig	2017-03-28 13:43:36.000000000 -0400
+++ nfs-utils-1.3.0/utils/exportfs/exportfs.man	2017-03-28 13:43:53.000000000 -0400
@@ -90,6 +90,13 @@ to be added to the kernel's export table
 .TP
 .B \-d kind " or " \-\-debug kind
 Turn on debugging. Valid kinds are: all, auth, call, general and parse.
+Debugging can also be turned on by setting
+.B debug=
+in the
+.B [exportfs]
+section of
+.IR /etc/nfs.conf .
+
 .TP
 .B -a
 Export or unexport all directories.
@@ -295,6 +302,7 @@ master table of exports
 table of clients accessing server's exports
 .SH SEE ALSO
 .BR exports (5),
+.BR nfs.conf (5),
 .BR rpc.mountd (8),
 .BR netgroup (5)
 .SH AUTHORS
diff -up nfs-utils-1.3.0/utils/gssd/gssd.c.orig nfs-utils-1.3.0/utils/gssd/gssd.c
--- nfs-utils-1.3.0/utils/gssd/gssd.c.orig	2017-03-28 13:43:36.000000000 -0400
+++ nfs-utils-1.3.0/utils/gssd/gssd.c	2017-03-28 13:43:53.000000000 -0400
@@ -71,6 +71,7 @@
 #include "gss_util.h"
 #include "krb5_util.h"
 #include "nfslib.h"
+#include "conffile.h"
 
 static char *pipefs_path = GSSD_PIPEFS_DIR;
 static DIR *pipefs_dir;
@@ -78,6 +79,7 @@ static int pipefs_fd;
 static int inotify_fd;
 struct event inotify_ev;
 
+char *conf_path = NFS_CONFFILE;
 char *keytabfile = GSSD_DEFAULT_KEYTAB_FILE;
 char **ccachesearch;
 int  use_memcache = 0;
@@ -831,6 +833,33 @@ main(int argc, char *argv[])
 	char *progname;
 	char *ccachedir = NULL;
 	struct event sighup_ev;
+	char *s;
+
+	conf_init();
+	use_memcache = conf_get_bool("gssd", "use-memcache", use_memcache);
+	root_uses_machine_creds = conf_get_bool("gssd", "use-machine-creds",
+						root_uses_machine_creds);
+	avoid_dns = conf_get_bool("gssd", "avoid-dns", avoid_dns);
+#ifdef HAVE_SET_ALLOWABLE_ENCTYPES
+	limit_to_legacy_enctypes = conf_get_bool("gssd", "limit-to-legacy-enctypes",
+						 limit_to_legacy_enctypes);
+#endif
+	context_timeout = conf_get_num("gssd", "context-timeout", context_timeout);
+	rpc_timeout = conf_get_num("gssd", "rpc-timeout", rpc_timeout);
+	s = conf_get_str("gssd", "pipefs-directory");
+	if (!s)
+		s = conf_get_str("general", "pipefs-directory");
+	if (s)
+		pipefs_path = s;
+	s = conf_get_str("gssd", "keytab-file");
+	if (s)
+		keytabfile = s;
+	s = conf_get_str("gssd", "cred-cache-directory");
+	if (s)
+		ccachedir = s;
+	s = conf_get_str("gssd", "preferred-realm");
+	if (s)
+		preferred_realm = s;
 
 	while ((opt = getopt(argc, argv, "DfvrlmnMp:k:d:t:T:R:")) != -1) {
 		switch (opt) {
diff -up nfs-utils-1.3.0/utils/gssd/gssd.man.orig nfs-utils-1.3.0/utils/gssd/gssd.man
--- nfs-utils-1.3.0/utils/gssd/gssd.man.orig	2017-03-28 13:43:36.000000000 -0400
+++ nfs-utils-1.3.0/utils/gssd/gssd.man	2017-03-28 13:43:53.000000000 -0400
@@ -297,6 +297,60 @@ The default timeout is set to 5 seconds.
 If you get messages like "WARNING: can't create tcp rpc_clnt to server
 %servername% for user with uid %uid%: RPC: Remote system error -
 Connection timed out", you should consider an increase of this timeout.
+.SH CONFIGURATION FILE
+Many of the options that can be set on the command line can also be
+controlled through values set in the
+.B [gssd]
+section of the
+.I /etc/nfs.conf
+configuration file.  Values recognized include:
+.TP
+.B use-memcache
+A Boolean flag equivalent to
+.BR -M .
+.TP
+.B use-machine-creds
+A Boolean flag. Setting to
+.B false
+is equivalent to giving the
+.B -n
+flag.
+.TP
+.B avoid-dns
+Setting to
+.B false
+is equivalent to providing the
+.B -D
+flag.
+.TP
+.B limit-to-legacy-enctypes
+Equivalent to
+.BR -l .
+.TP
+.B context-timeout
+Equivalent to
+.BR -T .
+.TP
+.B rpc-timeout
+Equivalent to
+.BR -t .
+.TP
+.B pipefs-directory
+Equivalent to
+.BR -p .
+.TP
+.B keytab-file
+Equivalent to
+.BR -k .
+.TP
+.BR cred-cache-directory
+Equivalent to
+.BR -d .
+.TP
+.B preferred-realm
+Equivalent to
+.BR -R .
+
 .SH SEE ALSO
 .BR rpc.svcgssd (8),
 .BR kerberos (1),
diff -up nfs-utils-1.3.0/utils/gssd/svcgssd.c.orig nfs-utils-1.3.0/utils/gssd/svcgssd.c
--- nfs-utils-1.3.0/utils/gssd/svcgssd.c.orig	2017-03-28 13:43:36.000000000 -0400
+++ nfs-utils-1.3.0/utils/gssd/svcgssd.c	2017-03-28 13:43:53.000000000 -0400
@@ -61,6 +61,9 @@
 #include "svcgssd.h"
 #include "gss_util.h"
 #include "err_util.h"
+#include "conffile.h"
+
+char *conf_path = NFS_CONFFILE;
 
 void
 sig_die(int signal)
@@ -98,6 +101,17 @@ main(int argc, char *argv[])
 	extern char *optarg;
 	char *progname;
 	char *principal = NULL;
+	char *s;
+
+	conf_init();
+
+	s = conf_get_str("svcgssd", "principal");
+	if (!s)
+		;
+	else if (strcmp(s, "system")== 0)
+		get_creds = 0;
+	else
+		principal = s;
 
 	while ((opt = getopt(argc, argv, "fivrnp:")) != -1) {
 		switch (opt) {
diff -up nfs-utils-1.3.0/utils/gssd/svcgssd.man.orig nfs-utils-1.3.0/utils/gssd/svcgssd.man
--- nfs-utils-1.3.0/utils/gssd/svcgssd.man.orig	2014-03-25 11:12:07.000000000 -0400
+++ nfs-utils-1.3.0/utils/gssd/svcgssd.man	2017-03-28 13:43:53.000000000 -0400
@@ -45,6 +45,23 @@ Use the system default credentials
 .RI (host/ FQDN @ REALM )
 rather than the default
 .RI nfs/ FQDN @ REALM .
+.SH CONFIGURATION FILE
+Some of the options that can be set on the command line can also be
+controlled through values set in the
+.B [svcgssd]
+section of the
+.I /etc/nfs.conf
+configuration file.  Values recognized include:
+.TP
+.B principal
+If set to
+.B system
+this is equivalent to the
+.B -n
+option.  If set to any other value, that is used like the
+.B -p
+option.
+
 .SH SEE ALSO
 .BR rpc.gssd(8),
 .SH AUTHORS
diff -up nfs-utils-1.3.0/utils/mountd/mountd.c.orig nfs-utils-1.3.0/utils/mountd/mountd.c
--- nfs-utils-1.3.0/utils/mountd/mountd.c.orig	2017-03-28 13:43:36.000000000 -0400
+++ nfs-utils-1.3.0/utils/mountd/mountd.c	2017-03-28 13:43:53.000000000 -0400
@@ -22,6 +22,8 @@
 #include <fcntl.h>
 #include <sys/resource.h>
 #include <sys/wait.h>
+
+#include "conffile.h"
 #include "xmalloc.h"
 #include "misc.h"
 #include "mountd.h"
@@ -39,6 +41,8 @@ int new_cache = 0;
 int manage_gids;
 int use_ipaddr = -1;
 
+char *conf_path = NFS_CONFFILE;
+
 /* PRC: a high-availability callout program can be specified with -H
  * When this is done, the program will receive callouts whenever clients
  * send mount or unmount requests -- the callout is not needed for 2.6 kernel */
@@ -692,6 +696,7 @@ main(int argc, char **argv)
 	char	*export_file = _PATH_EXPORTS;
 	char    *state_dir = NFS_STATEDIR;
 	char	*progname;
+	char	*s;
 	unsigned int listeners = 0;
 	int	foreground = 0;
 	int	port = 0;
@@ -707,6 +712,38 @@ main(int argc, char **argv)
 	else
 		progname = argv[0];
 
+	conf_init();
+	xlog_from_conffile("mountd");
+	manage_gids = conf_get_bool("mountd", "manage-gids", manage_gids);
+	descriptors = conf_get_num("mountd", "descriptors", descriptors);
+	port = conf_get_num("mountd", "port", port);
+	num_threads = conf_get_num("mountd", "threads", num_threads);
+	reverse_resolve = conf_get_bool("mountd", "reverse-lookup", reverse_resolve);
+	ha_callout_prog = conf_get_str("mountd", "ha-callout");
+
+	s = conf_get_str("mountd", "state-directory-path");
+	if (s)
+		state_dir = s;
+
+	/* NOTE: following uses "nfsd" section of nfs.conf !!!! */
+	if (conf_get_bool("nfsd", "udp", NFSCTL_UDPISSET(_rpcprotobits)))
+		NFSCTL_UDPSET(_rpcprotobits);
+	else
+		NFSCTL_UDPUNSET(_rpcprotobits);
+	if (conf_get_bool("nfsd", "tcp", NFSCTL_TCPISSET(_rpcprotobits)))
+		NFSCTL_TCPSET(_rpcprotobits);
+	else
+		NFSCTL_TCPUNSET(_rpcprotobits);
+	for (vers = 2; vers <= 4; vers++) {
+		char tag[10];
+		sprintf(tag, "vers%d", vers);
+		if (conf_get_bool("nfsd", tag, NFSCTL_VERISSET(nfs_version, vers)))
+			NFSCTL_VERSET(nfs_version, vers);
+		else
+			NFSCTL_VERUNSET(nfs_version, vers);
+	}
+
+
 	/* Parse the command line options and arguments. */
 	opterr = 0;
 	while ((c = getopt_long(argc, argv, "o:nFd:f:p:P:hH:N:V:vurs:t:g", longopts, NULL)) != EOF)
diff -up nfs-utils-1.3.0/utils/mountd/mountd.man.orig nfs-utils-1.3.0/utils/mountd/mountd.man
--- nfs-utils-1.3.0/utils/mountd/mountd.man.orig	2017-03-28 13:43:36.000000000 -0400
+++ nfs-utils-1.3.0/utils/mountd/mountd.man	2017-03-28 13:43:53.000000000 -0400
@@ -207,6 +207,39 @@ the server. Note that the 'primary' grou
 .B newgroup
 command on the client will still be effective.  This function requires
 a Linux Kernel with version at least 2.6.21.
+
+.SH CONFIGURATION FILE
+Many of the options that can be set on the command line can also be
+controlled through values set in the
+.B [mountd]
+or, in some cases, the
+.B [nfsd]
+sections of the
+.I /etc/nfs.conf
+configuration file.
+Values recognized in the
+.B [mountd]
+section include
+.BR manage-gids ,
+.BR descriptors ,
+.BR port ,
+.BR threads ,
+.BR reverse-lookup ", and"
+.BR state-directory-path ,
+.B ha-callout
+which each have the same effect as the option with the same name.
+
+The values recognized in the
+.B [nfsd]
+section include
+.BR TCP ,
+.BR UDP ,
+.BR vers2 ,
+.BR vers3 ", and"
+.B vers4
+which each have same same meaning as given by
+.BR rpc.nfsd (8).
+
 .SH TCP_WRAPPERS SUPPORT
 You can protect your
 .B rpc.mountd
@@ -261,6 +294,7 @@ table of clients accessing server's expo
 .BR rpc.nfsd (8),
 .BR rpc.rquotad (8),
 .BR nfs (5),
+.BR nfs.conf (5),
 .BR tcpd (8),
 .BR hosts_access (5),
 .BR iptables (8),
diff -up nfs-utils-1.3.0/utils/nfsdcltrack/nfsdcltrack.c.orig nfs-utils-1.3.0/utils/nfsdcltrack/nfsdcltrack.c
--- nfs-utils-1.3.0/utils/nfsdcltrack/nfsdcltrack.c.orig	2017-03-28 13:43:36.000000000 -0400
+++ nfs-utils-1.3.0/utils/nfsdcltrack/nfsdcltrack.c	2017-03-28 13:43:53.000000000 -0400
@@ -43,6 +43,7 @@
 #include <sys/capability.h>
 #endif
 
+#include "conffile.h"
 #include "xlog.h"
 #include "sqlite.h"
 
@@ -55,6 +56,8 @@
 /* defined by RFC 3530 */
 #define NFS4_OPAQUE_LIMIT	1024
 
+char *conf_path = NFS_CONFFILE;
+
 /* private data structures */
 struct cltrack_cmd {
 	char *name;
@@ -553,6 +556,7 @@ int
 main(int argc, char **argv)
 {
 	char arg;
+	char *val;
 	int rc = 0;
 	char *progname, *cmdarg = NULL;
 	struct cltrack_cmd *cmd;
@@ -562,6 +566,15 @@ main(int argc, char **argv)
 	xlog_syslog(1);
 	xlog_stderr(0);
 
+	conf_init();
+	xlog_from_conffile("nfsdcltrack");
+	val = conf_get_str("nfsdcltrack", "storagedir");
+	if (val)
+		storagedir = val;
+	rc = conf_get_num("nfsdcltrack", "debug", 0);
+	if (rc > 0)
+		xlog_config(D_ALL, 1);
+
 	/* process command-line options */
 	while ((arg = getopt_long(argc, argv, "hdfs:", longopts,
 				  NULL)) != EOF) {
diff -up nfs-utils-1.3.0/utils/nfsdcltrack/nfsdcltrack.man.orig nfs-utils-1.3.0/utils/nfsdcltrack/nfsdcltrack.man
--- nfs-utils-1.3.0/utils/nfsdcltrack/nfsdcltrack.man.orig	2014-03-25 11:12:07.000000000 -0400
+++ nfs-utils-1.3.0/utils/nfsdcltrack/nfsdcltrack.man	2017-03-28 13:43:53.000000000 -0400
@@ -66,6 +66,20 @@ Check to see if a nfs_client_id4 is allo
 .IP "\fBgracedone\fR" 4
 .IX Item "gracedone"
 Remove any unreclaimed client records from the database. This command requires a epoch boot time as an argument.
+.SH "EXTERNAL CONFIGURATION"
+The directory for stable storage information can be set via the file
+.B /etc/nfs.conf
+by setting the
+.B storagedir
+value in the
+.B nfsdcltrack
+section.  For example:
+.in +5
+[nfsdcltrack]
+.br
+  storagedir = /shared/nfs/nfsdcltrack
+.in -5
+Debuging to syslog can also be enabled by setting "debug = 1" in this file.
 .SH "LEGACY TRANSITION MECHANISM"
 .IX Header "LEGACY TRANSITION MECHANISM"
 The Linux kernel NFSv4 server has historically tracked this information
diff -up nfs-utils-1.3.0/utils/nfsd/nfsd.c.orig nfs-utils-1.3.0/utils/nfsd/nfsd.c
--- nfs-utils-1.3.0/utils/nfsd/nfsd.c.orig	2017-03-28 13:43:36.000000000 -0400
+++ nfs-utils-1.3.0/utils/nfsd/nfsd.c	2017-03-28 13:43:53.000000000 -0400
@@ -23,14 +23,18 @@
 #include <netinet/in.h>
 #include <arpa/inet.h>
 
+#include "conffile.h"
 #include "nfslib.h"
 #include "nfssvc.h"
 #include "xlog.h"
+#include "xcommon.h"
 
 #ifndef NFSD_NPROC
 #define NFSD_NPROC 8
 #endif
 
+char *conf_path = NFS_CONFFILE;
+
 static void	usage(const char *);
 
 static struct option longopts[] =
@@ -51,50 +55,6 @@ static struct option longopts[] =
 	{ NULL, 0, 0, 0 }
 };
 
-/* given a family and ctlbits, disable any that aren't listed in netconfig */
-#ifdef HAVE_LIBTIRPC
-static void
-nfsd_enable_protos(unsigned int *proto4, unsigned int *proto6)
-{
-	struct netconfig *nconf;
-	unsigned int *famproto;
-	void *handle;
-
-	xlog(D_GENERAL, "Checking netconfig for visible protocols.");
-
-	handle = setnetconfig();
-	while((nconf = getnetconfig(handle))) {
-		if (!(nconf->nc_flag & NC_VISIBLE))
-			continue;
-
-		if (!strcmp(nconf->nc_protofmly, NC_INET))
-			famproto = proto4;
-		else if (!strcmp(nconf->nc_protofmly, NC_INET6))
-			famproto = proto6;
-		else
-			continue;
-
-		if (!strcmp(nconf->nc_proto, NC_TCP))
-			NFSCTL_TCPSET(*famproto);
-		else if (!strcmp(nconf->nc_proto, NC_UDP))
-			NFSCTL_UDPSET(*famproto);
-
-		xlog(D_GENERAL, "Enabling %s %s.", nconf->nc_protofmly,
-			nconf->nc_proto);
-	}
-	endnetconfig(handle);
-	return;
-}
-#else /* HAVE_LIBTIRPC */
-static void
-nfsd_enable_protos(unsigned int *proto4, unsigned int *proto6)
-{
-	/* Enable all IPv4 protocols if no TIRPC support */
-	*proto4 = NFSCTL_ALLBITS;
-	*proto6 = 0;
-}
-#endif /* HAVE_LIBTIRPC */
-
 int
 main(int argc, char **argv)
 {
@@ -102,44 +62,91 @@ main(int argc, char **argv)
 	char *p, *progname, *port, *rdma_port = NULL;
 	char **haddr = NULL;
 	int hcounter = 0;
+	struct conf_list *hosts;
 	int	socket_up = 0;
 	unsigned int minorvers = 0;
 	unsigned int minorversset = 0;
 	unsigned int versbits = NFSCTL_VERDEFAULT;
 	unsigned int protobits = NFSCTL_ALLBITS;
-	unsigned int proto4 = 0;
-	unsigned int proto6 = 0;
 	int grace = -1;
 	int lease = -1;
 
-	progname = strdup(basename(argv[0]));
-	if (!progname) {
-		fprintf(stderr, "%s: unable to allocate memory.\n", argv[0]);
-		exit(1);
-	}
-
-	port = strdup("nfs");
-	if (!port) {
-		fprintf(stderr, "%s: unable to allocate memory.\n", progname);
-		exit(1);
-	}
-
-	haddr = malloc(sizeof(char *));
-	if (!haddr) {
-		fprintf(stderr, "%s: unable to allocate memory.\n", progname);
-		exit(1);
-	}
+	progname = basename(argv[0]);
+	haddr = xmalloc(sizeof(char *));
 	haddr[0] = NULL;
 
 	xlog_syslog(0);
 	xlog_stderr(1);
 
+	conf_init();
+	xlog_from_conffile("nfsd");
+	count = conf_get_num("nfsd", "threads", count);
+	grace = conf_get_num("nfsd", "grace-time", grace);
+	lease = conf_get_num("nfsd", "lease-time", lease);
+	port = conf_get_str("nfsd", "port");
+	if (!port)
+		port = "nfs";
+	rdma_port = conf_get_str("nfsd", "rdma");
+	if (conf_get_bool("nfsd", "udp", NFSCTL_UDPISSET(protobits)))
+		NFSCTL_UDPSET(protobits);
+	else
+		NFSCTL_UDPUNSET(protobits);
+	if (conf_get_bool("nfsd", "tcp", NFSCTL_TCPISSET(protobits)))
+		NFSCTL_TCPSET(protobits);
+	else
+		NFSCTL_TCPUNSET(protobits);
+	for (i = 2; i <= 4; i++) {
+		char tag[10];
+		sprintf(tag, "vers%d", i);
+		if (conf_get_bool("nfsd", tag, NFSCTL_VERISSET(versbits, i)))
+			NFSCTL_VERSET(versbits, i);
+		else
+			NFSCTL_VERUNSET(versbits, i);
+	}
+	/* We assume the kernel will default all minor versions to 'on',
+	 * and allow the config file to disable some.
+	 */
+	for (i = NFS4_MINMINOR; i <= NFS4_MAXMINOR; i++) {
+		char tag[20];
+		sprintf(tag, "vers4.%d", i);
+		/* The default for minor version support is to let the
+		 * kernel decide.  We could ask the kernel what that choice
+		 * will be, but that is needlessly complex.
+		 * Instead, perform a config-file lookup using each of the
+		 * two possible default.  If the result is different from the
+		 * default, then impose that value, else don't make a change
+		 * (i.e. don't set the bit in minorversset).
+		 */
+		if (!conf_get_bool("nfsd", tag, 1)) {
+			NFSCTL_VERSET(minorversset, i);
+			NFSCTL_VERUNSET(minorvers, i);
+		}
+		if (conf_get_bool("nfsd", tag, 0)) {
+			NFSCTL_VERSET(minorversset, i);
+			NFSCTL_VERSET(minorvers, i);
+		}
+	}
+
+	hosts = conf_get_list("nfsd", "host");
+	if (hosts && hosts->cnt) {
+		struct conf_list_node *n;
+		haddr = realloc(haddr, sizeof(char*) * hosts->cnt);
+		TAILQ_FOREACH(n, &(hosts->fields), link) {
+			haddr[hcounter] = n->field;
+			hcounter++;
+		}
+	}
+
 	while ((c = getopt_long(argc, argv, "dH:hN:V:p:P:sTUrG:L:", longopts, NULL)) != EOF) {
 		switch(c) {
 		case 'd':
 			xlog_config(D_ALL, 1);
 			break;
 		case 'H':
+			if (hosts) {
+				hosts = NULL;
+				hcounter = 0;
+			}
 			if (hcounter) {
 				haddr = realloc(haddr, sizeof(char*) * hcounter+1);
 				if(!haddr) {
@@ -148,30 +155,13 @@ main(int argc, char **argv)
 					exit(1);
 				}
 			}
-			haddr[hcounter] = strdup(optarg);
-			if (!haddr[hcounter]) {
-				fprintf(stderr, "%s: unable to allocate "
-					"memory.\n", progname);
-				exit(1);
-			}
+			haddr[hcounter] = optarg;
 			hcounter++;
 			break;
 		case 'P':	/* XXX for nfs-server compatibility */
 		case 'p':
 			/* only the last -p option has any effect */
-			portnum = atoi(optarg);
-			if (portnum <= 0 || portnum > 65535) {
-				fprintf(stderr, "%s: bad port number: %s\n",
-					progname, optarg);
-				usage(progname);
-			}
-			free(port);
-			port = strdup(optarg);
-			if (!port) {
-				fprintf(stderr, "%s: unable to allocate "
-						"memory.\n", progname);
-				exit(1);
-			}
+			port = optarg;
 			break;
 		case 'r':
 			rdma_port = "nfsrdma";
@@ -188,7 +178,7 @@ main(int argc, char **argv)
 			case 4:
 				if (*p == '.') {
 					int i = atoi(p+1);
-					if (i > NFS4_MAXMINOR) {
+					if (i < NFS4_MINMINOR || i > NFS4_MAXMINOR) {
 						fprintf(stderr, "%s: unsupported minor version\n", optarg);
 						exit(1);
 					}
@@ -210,7 +200,7 @@ main(int argc, char **argv)
 			case 4:
 				if (*p == '.') {
 					int i = atoi(p+1);
-					if (i > NFS4_MAXMINOR) {
+					if (i < NFS4_MINMINOR || i > NFS4_MAXMINOR) {
 						fprintf(stderr, "%s: unsupported minor version\n", optarg);
 						exit(1);
 					}
@@ -277,18 +267,6 @@ main(int argc, char **argv)
 
 	xlog_open(progname);
 
-	nfsd_enable_protos(&proto4, &proto6);
-
-	if (!NFSCTL_TCPISSET(protobits)) {
-		NFSCTL_TCPUNSET(proto4);
-		NFSCTL_TCPUNSET(proto6);
-	}
-
-	if (!NFSCTL_UDPISSET(protobits)) {
-		NFSCTL_UDPUNSET(proto4);
-		NFSCTL_UDPUNSET(proto6);
-	}
-
 	/* make sure that at least one version is enabled */
 	found_one = 0;
 	for (c = NFSD_MINVERS; c <= NFSD_MAXVERS; c++) {
@@ -301,8 +279,7 @@ main(int argc, char **argv)
 	}
 
 	if (NFSCTL_VERISSET(versbits, 4) &&
-	    !NFSCTL_TCPISSET(proto4) &&
-	    !NFSCTL_TCPISSET(proto6)) {
+	    !NFSCTL_TCPISSET(protobits)) {
 		xlog(L_ERROR, "version 4 requires the TCP protocol");
 		exit(1);
 	}
@@ -336,15 +313,10 @@ main(int argc, char **argv)
 
 	i = 0;
 	do {
-		error = nfssvc_set_sockets(AF_INET, proto4, haddr[i], port);
-		if (!error)
-			socket_up = 1;
-#ifdef IPV6_SUPPORTED
-		error = nfssvc_set_sockets(AF_INET6, proto6, haddr[i], port);
+		error = nfssvc_set_sockets(protobits, haddr[i], port);
 		if (!error)
 			socket_up = 1;
-#endif /* IPV6_SUPPORTED */
-	} while (++i < hcounter); 
+	} while (++i < hcounter);
 
 	if (rdma_port) {
 		error = nfssvc_set_rdmaport(rdma_port);
@@ -381,11 +353,7 @@ set_threads:
 	if ((error = nfssvc_threads(portnum, count)) < 0)
 		xlog(L_ERROR, "error starting threads: errno %d (%m)", errno);
 out:
-	free(port);
-	for(i=0; i < hcounter; i++)
-		free(haddr[i]);
 	free(haddr);
-	free(progname);
 	return (error != 0);
 }
 
diff -up nfs-utils-1.3.0/utils/nfsd/nfsd.man.orig nfs-utils-1.3.0/utils/nfsd/nfsd.man
--- nfs-utils-1.3.0/utils/nfsd/nfsd.man.orig	2014-03-25 11:12:07.000000000 -0400
+++ nfs-utils-1.3.0/utils/nfsd/nfsd.man	2017-03-28 13:43:53.000000000 -0400
@@ -57,7 +57,7 @@ This option can be used to request that
 .B rpc.nfsd
 does not offer certain versions of NFS. The current version of
 .B rpc.nfsd
-can support NFS versions 2,3,4 and the newer version 4.1.
+can support major NFS versions 2,3,4 and the minor versions 4.1 and 4.2.
 .TP
 .B \-s " or " \-\-syslog
 By default,
@@ -82,7 +82,7 @@ This option can be used to request that
 .B rpc.nfsd
 offer certain versions of NFS. The current version of
 .B rpc.nfsd
-can support NFS versions 2,3,4 and the newer version 4.1.
+can support major NFS versions 2,3,4 and the minor versions 4.1 and 4.2.
 .TP
 .B \-L " or " \-\-lease-time seconds
 Set the lease-time used for NFSv4.  This corresponds to how often
@@ -95,11 +95,11 @@ New file open requests (NFSv4) and new f
 allowed until after this time has passed to allow clients to recover state.
 .TP
 .I nproc
-specify the number of NFS server threads. By default, just one
-thread is started. However, for optimum performance several threads
+specify the number of NFS server threads. By default, eight
+threads are started. However, for optimum performance several threads
 should be used. The actual figure depends on the number of and the work
 load created by the NFS clients, but a useful starting point is
-8 threads. Effects of modifying that number can be checked using
+eight threads. Effects of modifying that number can be checked using
 the
 .BR nfsstat (8)
 program.
@@ -114,6 +114,58 @@ In particular
 .B rpc.nfsd 0
 will stop all threads and thus close any open connections.
 
+.SH CONFIGURATION FILE
+Many of the options that can be set on the command line can also be
+controlled through values set in the
+.B [nfsd]
+section of the
+.I /etc/nfs.conf
+configuration file.  Values recognized include:
+.TP
+.B threads
+The number of threads to start.
+.TP
+.B host
+A host name, or comma separated list of host names, that
+.I rpc.nfsd
+will listen on.  Use of the
+.B --host
+option replaces all host names listed here.
+.TP
+.B grace-time
+The grace time, for both NFSv4 and NLM, in seconds.
+.TP
+.B lease-time
+The lease time for NFSv4, in seconds.
+.TP
+.B port
+Set the port for TCP/UDP to bind to.
+.TP
+.B rdma
+Set RDMA port.  Use "rdma=nfsrdma" to enable standard port.
+.TP
+.B UDP
+Enable (with "on" or "yes" etc) or disable ("off", "no") UDP support.
+.TP
+.B TCP
+Enable or disable TCP support.
+.TP
+.B vers2
+.TP
+.B vers3
+.TP
+.B vers4
+Enable or disable a major NFS version.  3 and 4 are normally enabled
+by default.
+.TP
+.B vers4.1
+.TP
+.B vers4.2
+Setting these to "off" or similar will disable the selected minor
+versions.  Setting to "on" will enable them.  The default values
+are determined by the kernel, and usually minor versions default to
+being enabled once the implementation is sufficiently complete.
+
 .SH NOTES
 If the program is built with TI-RPC support, it will enable any protocol and
 address family combinations that are marked visible in the
@@ -124,6 +176,7 @@ database.
 .BR rpc.mountd (8),
 .BR exports (5),
 .BR exportfs (8),
+.BR nfs.conf (5),
 .BR rpc.rquotad (8),
 .BR nfsstat (8),
 .BR netconfig(5).
diff -up nfs-utils-1.3.0/utils/nfsd/nfssvc.c.orig nfs-utils-1.3.0/utils/nfsd/nfssvc.c
--- nfs-utils-1.3.0/utils/nfsd/nfssvc.c.orig	2017-03-28 13:43:36.000000000 -0400
+++ nfs-utils-1.3.0/utils/nfsd/nfssvc.c	2017-03-28 13:43:53.000000000 -0400
@@ -23,6 +23,7 @@
 
 #include "nfslib.h"
 #include "xlog.h"
+#include "nfssvc.h"
 
 #ifndef NFSD_FS_DIR
 #define NFSD_FS_DIR	  "/proc/fs/nfsd"
@@ -123,22 +124,6 @@ nfssvc_setfds(const struct addrinfo *hin
 	if (fd < 0)
 		return 0;
 
-	switch(hints->ai_family) {
-	case AF_INET:
-		family = "inet";
-		break;
-#ifdef IPV6_SUPPORTED
-	case AF_INET6:
-		family = "inet6";
-		break;
-#endif /* IPV6_SUPPORTED */
-	default:
-		xlog(L_ERROR, "Unknown address family specified: %d\n",
-				hints->ai_family);
-		rc = EAFNOSUPPORT;
-		goto error;
-	}
-
 	rc = getaddrinfo(node, port, hints, &addrhead);
 	if (rc == EAI_NONAME && !strcmp(port, "nfs")) {
 		snprintf(buf, sizeof(buf), "%d", NFS_PORT);
@@ -146,10 +131,10 @@ nfssvc_setfds(const struct addrinfo *hin
 	}
 
 	if (rc != 0) {
-		xlog(L_ERROR, "unable to resolve %s:%s to %s address: "
-				"%s", node ? node : "ANYADDR", port, family,
-				rc == EAI_SYSTEM ? strerror(errno) :
-					gai_strerror(rc));
+		xlog(L_ERROR, "unable to resolve %s:%s: %s",
+			node ? node : "ANYADDR", port,
+			rc == EAI_SYSTEM ? strerror(errno) :
+				gai_strerror(rc));
 		goto error;
 	}
 
@@ -168,6 +153,20 @@ nfssvc_setfds(const struct addrinfo *hin
 			continue;
 		}
 
+		switch(addr->ai_addr->sa_family) {
+		case AF_INET:
+			family = "AF_INET";
+			break;
+#ifdef IPV6_SUPPORTED
+		case AF_INET6:
+			family = "AF_INET6";
+			break;
+#endif /* IPV6_SUPPORTED */
+		default:
+			addr = addr->ai_next;
+			continue;
+		}
+
 		xlog(D_GENERAL, "Creating %s %s socket.", family, proto);
 
 		/* open socket and prepare to hand it off to kernel */
@@ -251,12 +250,16 @@ error:
 }
 
 int
-nfssvc_set_sockets(const int family, const unsigned int protobits,
+nfssvc_set_sockets(const unsigned int protobits,
 		   const char *host, const char *port)
 {
 	struct addrinfo hints = { .ai_flags = AI_PASSIVE };
 
-	hints.ai_family = family;
+#ifdef IPV6_SUPPORTED
+	hints.ai_family = AF_UNSPEC;
+#else  /* IPV6_SUPPORTED */
+	hints.ai_family = AF_INET;
+#endif /* IPV6_SUPPORTED */
 
 	if (!NFSCTL_ANYPROTO(protobits))
 		return EPROTOTYPE;
diff -up nfs-utils-1.3.0/utils/nfsd/nfssvc.h.orig nfs-utils-1.3.0/utils/nfsd/nfssvc.h
--- nfs-utils-1.3.0/utils/nfsd/nfssvc.h.orig	2014-03-25 11:12:07.000000000 -0400
+++ nfs-utils-1.3.0/utils/nfsd/nfssvc.h	2017-03-28 13:43:53.000000000 -0400
@@ -22,7 +22,7 @@
 
 void	nfssvc_mount_nfsdfs(char *progname);
 int	nfssvc_inuse(void);
-int	nfssvc_set_sockets(const int family, const unsigned int protobits,
+int	nfssvc_set_sockets(const unsigned int protobits,
 			   const char *host, const char *port);
 void	nfssvc_set_time(const char *type, const int seconds);
 int	nfssvc_set_rdmaport(const char *port);
diff -up nfs-utils-1.3.0/utils/statd/sm-notify.c.orig nfs-utils-1.3.0/utils/statd/sm-notify.c
--- nfs-utils-1.3.0/utils/statd/sm-notify.c.orig	2014-03-25 11:12:07.000000000 -0400
+++ nfs-utils-1.3.0/utils/statd/sm-notify.c	2017-03-28 13:43:53.000000000 -0400
@@ -29,6 +29,7 @@
 #include <errno.h>
 #include <grp.h>
 
+#include "conffile.h"
 #include "sockaddr.h"
 #include "xlog.h"
 #include "nsm.h"
@@ -64,6 +65,7 @@ static _Bool		opt_update_state = true;
 static unsigned int	opt_max_retry = 15 * 60;
 static char *		opt_srcaddr = NULL;
 static char *		opt_srcport = NULL;
+char *			conf_path = NFS_CONFFILE;
 
 static void		notify(const int sock);
 static int		notify_host(int, struct nsm_host *);
@@ -455,6 +457,7 @@ main(int argc, char **argv)
 {
 	int	c, sock, force = 0;
 	char *	progname;
+	char *	s;
 
 	progname = strrchr(argv[0], '/');
 	if (progname != NULL)
@@ -462,6 +465,15 @@ main(int argc, char **argv)
 	else
 		progname = argv[0];
 
+	conf_init();
+	xlog_from_conffile("sm-notify");
+	opt_max_retry = conf_get_num("sm-notify", "retry-time", opt_max_retry / 60) * 60;
+	opt_srcport = conf_get_str("sm-notify", "outgoing-port");
+	opt_srcaddr = conf_get_str("sm-notify", "outgoing-addr");
+	s = conf_get_str("statd", "state-directory-path");
+	if (s && !nsm_setup_pathnames(argv[0], s))
+		exit(1);
+
 	while ((c = getopt(argc, argv, "dm:np:v:P:f")) != -1) {
 		switch (c) {
 		case 'f':
diff -up nfs-utils-1.3.0/utils/statd/sm-notify.man.orig nfs-utils-1.3.0/utils/statd/sm-notify.man
--- nfs-utils-1.3.0/utils/statd/sm-notify.man.orig	2014-03-25 11:12:07.000000000 -0400
+++ nfs-utils-1.3.0/utils/statd/sm-notify.man	2017-03-28 13:43:53.000000000 -0400
@@ -219,6 +219,33 @@ argument when sending SM_NOTIFY requests
 .IP
 This option can be useful in multi-homed configurations where
 the remote requires notification from a specific network address.
+.SH CONFIGURATION FILE
+Many of the options that can be set on the command line can also be
+controlled through values set in the
+.B [sm-notify]
+or, in one case, the
+.B [statd]
+section of the
+.I /etc/nfs.conf
+configuration file.
+
+Values recognized in the
+.B [sm-notify]
+section include:
+.BR retry-time ,
+.BR outgoing-port ", and"
+.BR outgoing-addr .
+These have the same effect as the command line options
+.BR m ,
+.BR p ", and"
+.B v
+respectively.
+
+The value recognized in the
+.B [statd]
+section is
+.BR state-directory-path .
+
 .SH SECURITY
 The
 .B sm-notify
diff -up nfs-utils-1.3.0/utils/statd/statd.c.orig nfs-utils-1.3.0/utils/statd/statd.c
--- nfs-utils-1.3.0/utils/statd/statd.c.orig	2017-03-28 13:43:36.000000000 -0400
+++ nfs-utils-1.3.0/utils/statd/statd.c	2017-03-28 13:43:53.000000000 -0400
@@ -26,6 +26,7 @@
 #include <sys/wait.h>
 #include <grp.h>
 
+#include "conffile.h"
 #include "statd.h"
 #include "nfslib.h"
 #include "nfsrpc.h"
@@ -36,6 +37,7 @@
 #include <sys/socket.h>
 
 int	run_mode = 0;		/* foreground logging mode */
+char	*conf_path = NFS_CONFFILE;
 
 /* LH - I had these local to main, but it seemed silly to have 
  * two copies of each - one in main(), one static in log.c... 
@@ -242,15 +244,21 @@ static void set_nlm_port(char *type, int
 int main (int argc, char **argv)
 {
 	extern char *optarg;
+	char *s;
 	int pid;
 	int arg;
 	int port = 0, out_port = 0;
 	int nlm_udp = 0, nlm_tcp = 0;
 	struct rlimit rlim;
+	char *env;
 
 	/* Default: daemon mode, no other options */
 	run_mode = 0;
 
+	env = getenv("RPC_STATD_NO_NOTIFY");
+	if (env && atoi(env) > 0)
+		run_mode |= MODE_NO_NOTIFY;
+
 	/* Log to stderr if there's an error during startup */
 	xlog_stderr(1);
 	xlog_syslog(0);
@@ -265,6 +273,24 @@ int main (int argc, char **argv)
 	/* Set hostname */
 	MY_NAME = NULL;
 
+	conf_init();
+	xlog_from_conffile("statd");
+	out_port = conf_get_num("statd", "outgoing-port", out_port);
+	port = conf_get_num("statd", "port", port);
+	MY_NAME = conf_get_str("statd", "name");
+	if (MY_NAME)
+		run_mode |= STATIC_HOSTNAME;
+	s = conf_get_str("statd", "state-directory-path");
+	if (s && !nsm_setup_pathnames(argv[0], s))
+		exit(1);
+	s = conf_get_str("statd", "ha-callout");
+	if (s)
+		ha_callout_prog = s;
+
+	nlm_tcp = conf_get_num("lockd", "port", nlm_tcp);
+	/* udp defaults to the same as tcp ! */
+	nlm_udp = conf_get_num("lockd", "udp-port", nlm_tcp);
+
 	/* Process command line switches */
 	while ((arg = getopt_long(argc, argv, "h?vVFNH:dn:p:o:P:LT:U:", longopts, NULL)) != EOF) {
 		switch (arg) {
diff -up nfs-utils-1.3.0/utils/statd/statd.man.orig nfs-utils-1.3.0/utils/statd/statd.man
--- nfs-utils-1.3.0/utils/statd/statd.man.orig	2017-03-28 13:43:36.000000000 -0400
+++ nfs-utils-1.3.0/utils/statd/statd.man	2017-03-28 13:43:53.000000000 -0400
@@ -8,7 +8,7 @@
 .\" Rewritten by Chuck Lever <chuck.lever@oracle.com>, 2009.
 .\" Copyright 2009 Oracle.  All rights reserved.
 .\"
-.TH RPC.STATD 8 "1 November 2009
+.TH RPC.STATD 8 "1 November 2009"
 .SH NAME
 rpc.statd \- NSM service daemon
 .SH SYNOPSIS
@@ -247,7 +247,7 @@ should listen on for
 .B NLM
 requests.
 .TP
-.BI "\-P, " "" \-\-state\-directory\-path " pathname
+.BI "\-P, " "" \-\-state\-directory\-path " pathname"
 Specifies the pathname of the parent directory
 where NSM state information resides.
 If this option is not specified,
@@ -267,6 +267,37 @@ Causes
 to display version information on
 .I stderr
 and then exit.
+.SH CONFIGURATION FILE
+Many of the options that can be set on the command line can also be
+controlled through values set in the
+.B [statd]
+or, in some cases, the
+.B [lockd]
+sections of the
+.I /etc/nfs.conf
+configuration file.
+Values recognized in the
+.B [statd]
+section include
+.BR port ,
+.BR outgoing-port ,
+.BR name ,
+.BR state-directory-path ", and"
+.B ha-callout
+which each have the same effect as the option with the same name.
+
+The values recognized in the
+.B [lockd]
+section include
+.B port
+and
+.B udp-port
+which have the same effect as the
+.B --nlm-port
+and
+.B --nlm-udp-port
+options, respectively.
+
 .SH SECURITY
 The
 .B rpc.statd
@@ -387,6 +418,11 @@ it attempts to start listeners on networ
 As long as at least one network transport listener starts successfully,
 .B rpc.statd
 will operate.
+.SH ENVIRONMENT
+.TP
+.B RPC_STATD_NO_NOTIFY=
+If set to a positive integer, has the same effect as
+.IR \-\-no\-notify .
 .SH FILES
 .TP 2.5i
 .I /var/lib/nfs/sm