.\"
.\" This file and its contents are supplied under the terms of the
.\" Common Development and Distribution License ("CDDL"), version 1.0.
.\" You may only use this file in accordance with the terms of version
.\" 1.0 of the CDDL.
.\"
.\" A full copy of the text of the CDDL should have accompanied this
.\" source.  A copy of the CDDL is also available via the Internet at
.\" http://www.illumos.org/license/CDDL.
.\"
.\"
.\" Copyright 2012, Richard Lowe.
.\" Copyright (c) 2012, 2018 by Delphix. All rights reserved.
.\" Copyright 2017 Nexenta Systems, Inc.
.\" Copyright (c) 2017 Lawrence Livermore National Security, LLC.
.\" Copyright (c) 2017 Intel Corporation.
.\"
.Dd April 14, 2019
.Dt ZDB 8 SMM
.Os Linux
.Sh NAME
.Nm zdb
.Nd display zpool debugging and consistency information
.Sh SYNOPSIS
.Nm
.Op Fl AbcdDFGhikLMPsvXY
.Op Fl e Oo Fl V Oc Op Fl p Ar path ...
.Op Fl I Ar inflight I/Os
.Oo Fl o Ar var Ns = Ns Ar value Oc Ns ...
.Op Fl t Ar txg
.Op Fl U Ar cache
.Op Fl x Ar dumpdir
.Op Ar poolname Op Ar object ...
.Nm
.Op Fl AdiPv
.Op Fl e Oo Fl V Oc Op Fl p Ar path ...
.Op Fl U Ar cache
.Ar dataset Op Ar object ...
.Nm
.Fl C
.Op Fl A
.Op Fl U Ar cache
.Nm
.Fl E
.Op Fl A
.Ar word0 Ns \&: Ns Ar word1 Ns :...: Ns Ar word15
.Nm
.Fl l
.Op Fl Aqu
.Ar device
.Nm
.Fl m
.Op Fl AFLPXY
.Op Fl e Oo Fl V Oc Op Fl p Ar path ...
.Op Fl t Ar txg
.Op Fl U Ar cache
.Ar poolname Op Ar vdev Op Ar metaslab ...
.Nm
.Fl O
.Ar dataset path
.Nm
.Fl R
.Op Fl A
.Op Fl e Oo Fl V Oc Op Fl p Ar path ...
.Op Fl U Ar cache
.Ar poolname vdev Ns \&: Ns Ar offset Ns \&: Ns Ar [<lsize>/]<psize> Ns Op : Ns Ar flags
.Nm
.Fl S
.Op Fl AP
.Op Fl e Oo Fl V Oc Op Fl p Ar path ...
.Op Fl U Ar cache
.Ar poolname
.Sh DESCRIPTION
The
.Nm
utility displays information about a ZFS pool useful for debugging and performs
some amount of consistency checking.
It is a not a general purpose tool and options
.Pq and facilities
may change.
This is not a
.Xr fsck 8
utility.
.Pp
The output of this command in general reflects the on-disk structure of a ZFS
pool, and is inherently unstable.
The precise output of most invocations is not documented, a knowledge of ZFS
internals is assumed.
.Pp
If the
.Ar dataset
argument does not contain any
.Qq Sy /
or
.Qq Sy @
characters, it is interpreted as a pool name.
The root dataset can be specified as
.Ar pool Ns /
.Pq pool name followed by a slash .
.Pp
When operating on an imported and active pool it is possible, though unlikely,
that zdb may interpret inconsistent pool data and behave erratically.
.Sh OPTIONS
Display options:
.Bl -tag -width Ds
.It Fl b
Display statistics regarding the number, size
.Pq logical, physical and allocated
and deduplication of blocks.
.It Fl c
Verify the checksum of all metadata blocks while printing block statistics
.Po see
.Fl b
.Pc .
.Pp
If specified multiple times, verify the checksums of all blocks.
.It Fl C
Display information about the configuration.
If specified with no other options, instead display information about the cache
file
.Pq Pa /etc/zfs/zpool.cache .
To specify the cache file to display, see
.Fl U .
.Pp
If specified multiple times, and a pool name is also specified display both the
cached configuration and the on-disk configuration.
If specified multiple times with
.Fl e
also display the configuration that would be used were the pool to be imported.
.It Fl d
Display information about datasets.
Specified once, displays basic dataset information: ID, create transaction,
size, and object count.
.Pp
If specified multiple times provides greater and greater verbosity.
.Pp
If object IDs are specified, display information about those specific objects
only.
.It Fl D
Display deduplication statistics, including the deduplication ratio
.Pq Sy dedup ,
compression ratio
.Pq Sy compress ,
inflation due to the zfs copies property
.Pq Sy copies ,
and an overall effective ratio
.Pq Sy dedup No * Sy compress No / Sy copies .
.It Fl DD
Display a histogram of deduplication statistics, showing the allocated
.Pq physically present on disk
and referenced
.Pq logically referenced in the pool
block counts and sizes by reference count.
.It Fl DDD
Display the statistics independently for each deduplication table.
.It Fl DDDD
Dump the contents of the deduplication tables describing duplicate blocks.
.It Fl DDDDD
Also dump the contents of the deduplication tables describing unique blocks.
.It Fl E Ar word0 Ns \&: Ns Ar word1 Ns :...: Ns Ar word15
Decode and display block from an embedded block pointer specified by the
.Ar word
arguments.
.It Fl h
Display pool history similar to
.Nm zpool Cm history ,
but include internal changes, transaction, and dataset information.
.It Fl i
Display information about intent log
.Pq ZIL
entries relating to each dataset.
If specified multiple times, display counts of each intent log transaction type.
.It Fl k
Examine the checkpointed state of the pool.
Note, the on disk format of the pool is not reverted to the checkpointed state.
.It Fl l Ar device
Read the vdev labels from the specified device.
.Nm Fl l
will return 0 if valid label was found, 1 if error occurred, and 2 if no valid
labels were found. Each unique configuration is displayed only once.
.It Fl ll Ar device
In addition display label space usage stats.
.It Fl lll Ar device
Display every configuration, unique or not.
.Pp
If the
.Fl q
option is also specified, don't print the labels.
.Pp
If the
.Fl u
option is also specified, also display the uberblocks on this device.  Specify
multiple times to increase verbosity.
.It Fl L
Disable leak detection and the loading of space maps.
By default,
.Nm
verifies that all non-free blocks are referenced, which can be very expensive.
.It Fl m
Display the offset, spacemap, and free space of each metaslab.
.It Fl mm
Also display information about the on-disk free space histogram associated with
each metaslab.
.It Fl mmm
Display the maximum contiguous free space, the in-core free space histogram, and
the percentage of free space in each space map.
.It Fl mmmm
Display every spacemap record.
.It Fl M
Display the offset, spacemap, and free space of each metaslab.
.It Fl MM
Also display information about the maximum contiguous free space and the
percentage of free space in each space map.
.It Fl MMM
Display every spacemap record.
.It Fl O Ar dataset path
Look up the specified
.Ar path
inside of the
.Ar dataset
and display its metadata and indirect blocks.
Specified
.Ar path
must be relative to the root of
.Ar dataset .
This option can be combined with
.Fl v
for increasing verbosity.
.It Xo
.Fl R Ar poolname vdev Ns \&: Ns Ar offset Ns \&: Ns Ar [<lsize>/]<psize> Ns Op : Ns Ar flags
.Xc
Read and display a block from the specified device.
By default the block is displayed as a hex dump, but see the description of the
.Sy r
flag, below.
.Pp
The block is specified in terms of a colon-separated tuple
.Ar vdev
.Pq an integer vdev identifier
.Ar offset
.Pq the offset within the vdev
.Ar size
.Pq the physical size, or logical size / physical size
of the block to read and, optionally,
.Ar flags
.Pq a set of flags, described below .
.Pp
.Bl -tag -compact -width "b offset"
.It Sy b Ar offset
Print block pointer
.It Sy c
Calculate and display checksums
.It Sy d
Decompress the block. Set environment variable
.Nm ZDB_NO_ZLE
to skip zle when guessing.
.It Sy e
Byte swap the block
.It Sy g
Dump gang block header
.It Sy i
Dump indirect block
.It Sy r
Dump raw uninterpreted block data
.It Sy v
Verbose output for guessing compression algorithm
.El
.It Fl s
Report statistics on
.Nm zdb
I/O.
Display operation counts, bandwidth, and error counts of I/O to the pool from
.Nm .
.It Fl S
Simulate the effects of deduplication, constructing a DDT and then display
that DDT as with
.Fl DD .
.It Fl u
Display the current uberblock.
.El
.Pp
Other options:
.Bl -tag -width Ds
.It Fl A
Do not abort should any assertion fail.
.It Fl AA
Enable panic recovery, certain errors which would otherwise be fatal are
demoted to warnings.
.It Fl AAA
Do not abort if asserts fail and also enable panic recovery.
.It Fl e Op Fl p Ar path ...
Operate on an exported pool, not present in
.Pa /etc/zfs/zpool.cache .
The
.Fl p
flag specifies the path under which devices are to be searched.
.It Fl x Ar dumpdir
All blocks accessed will be copied to files in the specified directory.
The blocks will be placed in sparse files whose name is the same as
that of the file or device read.
.Nm
can be then run on the generated files.
Note that the
.Fl bbc
flags are sufficient to access
.Pq and thus copy
all metadata on the pool.
.It Fl F
Attempt to make an unreadable pool readable by trying progressively older
transactions.
.It Fl G
Dump the contents of the zfs_dbgmsg buffer before exiting
.Nm .
zfs_dbgmsg is a buffer used by ZFS to dump advanced debug information.
.It Fl I Ar inflight I/Os
Limit the number of outstanding checksum I/Os to the specified value.
The default value is 200.
This option affects the performance of the
.Fl c
option.
.It Fl o Ar var Ns = Ns Ar value ...
Set the given global libzpool variable to the provided value.
The value must be an unsigned 32-bit integer.
Currently only little-endian systems are supported to avoid accidentally setting
the high 32 bits of 64-bit variables.
.It Fl P
Print numbers in an unscaled form more amenable to parsing, eg. 1000000 rather
than 1M.
.It Fl t Ar transaction
Specify the highest transaction to use when searching for uberblocks.
See also the
.Fl u
and
.Fl l
options for a means to see the available uberblocks and their associated
transaction numbers.
.It Fl U Ar cachefile
Use a cache file other than
.Pa /etc/zfs/zpool.cache .
.It Fl v
Enable verbosity.
Specify multiple times for increased verbosity.
.It Fl V
Attempt verbatim import.
This mimics the behavior of the kernel when loading a pool from a cachefile.
Only usable with
.Fl e .
.It Fl X
Attempt
.Qq extreme
transaction rewind, that is attempt the same recovery as
.Fl F
but read transactions otherwise deemed too old.
.It Fl Y
Attempt all possible combinations when reconstructing indirect split blocks.
This flag disables the individual I/O deadman timer in order to allow as
much time as required for the attempted reconstruction.
.El
.Pp
Specifying a display option more than once enables verbosity for only that
option, with more occurrences enabling more verbosity.
.Pp
If no options are specified, all information about the named pool will be
displayed at default verbosity.
.Sh EXAMPLES
.Bl -tag -width Ds
.It Xo
.Sy Example 1
Display the configuration of imported pool
.Pa rpool
.Xc
.Bd -literal
# zdb -C rpool

MOS Configuration:
        version: 28
        name: 'rpool'
 ...
.Ed
.It Xo
.Sy Example 2
Display basic dataset information about
.Pa rpool
.Xc
.Bd -literal
# zdb -d rpool
Dataset mos [META], ID 0, cr_txg 4, 26.9M, 1051 objects
Dataset rpool/swap [ZVOL], ID 59, cr_txg 356, 486M, 2 objects
 ...
.Ed
.It Xo
.Sy Example 3
Display basic information about object 0 in
.Pa rpool/export/home
.Xc
.Bd -literal
# zdb -d rpool/export/home 0
Dataset rpool/export/home [ZPL], ID 137, cr_txg 1546, 32K, 8 objects

    Object  lvl   iblk   dblk  dsize  lsize   %full  type
         0    7    16K    16K  15.0K    16K   25.00  DMU dnode
.Ed
.It Xo
.Sy Example 4
Display the predicted effect of enabling deduplication on
.Pa rpool
.Xc
.Bd -literal
# zdb -S rpool
Simulated DDT histogram:

bucket              allocated                       referenced
______   ______________________________   ______________________________
refcnt   blocks   LSIZE   PSIZE   DSIZE   blocks   LSIZE   PSIZE   DSIZE
------   ------   -----   -----   -----   ------   -----   -----   -----
     1     694K   27.1G   15.0G   15.0G     694K   27.1G   15.0G   15.0G
     2    35.0K   1.33G    699M    699M    74.7K   2.79G   1.45G   1.45G
 ...
dedup = 1.11, compress = 1.80, copies = 1.00, dedup * compress / copies = 2.00
.Ed
.El
.Sh SEE ALSO
.Xr zfs 8 ,
.Xr zpool 8