GENERAL CONSIDERATIONS
======================

SCST has almost full features implementation of T10-PI standard
supporting all protection modes. The only missing feature is Application
Tag mode page. A patch implementing it is welcome.

SCST T10-PI implementation has 2 modes of operations:

1. Computing. In this mode no protection information (PI) is stored. It
only checked upon arrival (WRITEs) and calculated from the data upon
sending (READs). Goal of this mode to provide protection against uplink,
i.e. path to initiator, corruptions.

2. Storing. In this mode PI is stored either in a file/device as simple
array with 8 bytes entries, or inside block device using block integrity
extensions. In this mode full end-to-end protection could be
implemented.

In both "computing" and "storing" modes PI can be checked on any stages
of commands processing:

1. Target HW

2. SCST

3. Backend HW, if it supports block integrity extensions.

Any of them or all can be independently enabled or disabled depending
from level of performance overhead and required protection. For
instance, the target HW stage is the cheapest from performance
perspective, but doesn't protect against corruptions or misdirections on
PCI bus between the target HW and system. Another example, if backend HW
supports T10-PI, no checks on other stages are generally needed, but can
be used to localize place where corruption happened. Checking on each
stage to be able to localize corruption place is the recommended by T10
way of processing.


USER INTERFACE
==============

Currently only scst_vdisk handler supports T10-PI.

See in the main README description of SCST sysfs attributes:
dif_capabilities, dif_checks_failed, dif_mode, dif_type,
dif_static_app_tag and dif_filename.

Examples:
---------

dif_mode=tgt, dif_type=1 - TGT level only check, type 1

dif_mode=scst, dif_type=1, dif_static_app_tag=0x4149 -
	SCST level only check, type 1, static app tag 0x4149

dif_mode=scst|dev_store, dif_type=1, dif_filename=/var/lib/scst/dif_tags/rd1_dif.dif -
	SCST level only check and storing PI data in the file

dif_mode=scst, dif_type=2 - SCST level only check, type 2 (32-byte commands)

dif_mode=tag|scst|dev_check|dev_store, dif_type=1 - all levels check
	storing tags using block integrity extensions, type 1


INTERFACE BETWEEN SCST AND TARGET DRIVERS
=========================================

To support T10-PI struct scst_tgt_template has several new fields:
supported_dif_block_sizes, dif_supported, hw_dif_type1_supported,
hw_dif_type2_supported, hw_dif_type3_supported, hw_dif_ip_supported,
hw_dif_same_sg_layout_required. See their description in their comments
in scst.h.

A READ-direction workflow from a target driver perspective should look
like:

1. No extra actions until xmit_response() stage*

2. On xmit_response() stage call scst_cmd_get_dif_sg(cmd)**. If returned
value is NULL, no further PI actions are needed.

3. Otherwise, call scst_get_read_dif_tgt_actions(cmd) to find out what
PI actions are needed. The return value has encoded 2 types of actions:
action itself and tags checks.

Possible actions, which could be extracted by using scst_get_dif_action(),
are:

 - SCST_DIF_ACTION_STRIP - check, then strip the protection info, if it
   is OK

 - SCST_DIF_ACTION_INSERT - insert the protection info

 - SCST_DIF_ACTION_PASS_CHECK - check the protection info, then pass it
   to the initiator

 - SCST_DIF_ACTION_PASS - then pass the protection information to the
   initiator without checking

Possible tags checks, which could be extracted by using
scst_get_dif_checks() are:

 - SCST_DIF_CHECK_GUARD_TAG - check the guard tags

 - SCST_DIF_CHECK_REF_TAG - check the reference tags

 - SCST_DIF_CHECK_APP_TAG - check the application tags comparing them to
   the static tag set by dif_static_app_tag attribute

4. Perform the requested PI actions and transfer PI from the returned
dif_sg together with the regular data**.


A WRITE-direction workflow from a target driver perspective should look
like:

1. No extra actions until rdy_to_xfer() stage*

2. On rdy_to_xfer() stage call scst_cmd_get_dif_sg(cmd)**. If returned
value is NULL, no further PI actions are needed.

3. Otherwise, call scst_get_write_dif_tgt_actions(cmd) to find out what
PI actions are needed.

4. Perform the requested PI actions and transfer PI to the returned
dif_sg together with regular data**.


(*) If the target driver uses custom data buffer, on this stage it must
together with data sg by scst_cmd_set_tgt_dif_sg() function also set the
corresponding PI sg.

(**) The PI SG returned by scst_cmd_get_dif_sg() does not have the
corresponding SG-segments counter, because it is strictly bound to
number of blocks in the data SG.


You can find full external SCST T10-PI interface if you look in scst.h
functions with "_dif_" string in their name. They are well documented in
comments near them.