#!/usr/bin/perl

use strict;
use warnings;

my $Version  = 'SCST Configurator v3.5.0';

# Configures SCST
#
# Author:       Mark R. Buechler
# License:      GPLv2
# Copyright (c) 2005-2011 Mark R. Buechler
# Copyright (C) 2011-2019 Bart Van Assche <bvanassche@acm.org>

sub usage
  {
    print <<"EndUsage";
$Version

Usage:
     -h, -help, --help       : Show this information.

General Operations
     -config <file>          : Configure Actifio SCST given the specified <file>.
     -check_config <file>    : Checks the saved configuration <file>.
     -write_config <file>    : Writes the current configuration to <file>.
     -clear_config           : Clear all SCST configuration.
     -clear_act_config       : Clear SCST - but leaves targets enabled.
     -act_peer_config <file> : Writes what we think our peers config should be (if it remains passive) to <file>
     -peer_quick_config <file> : Writes what we think our peers config should be (if it became active) to <file>

Query Operations
     -list_handler [<hndlr>] : List all available handlers or specific <hndlr>.
     -list_device [<device>] : List all open devices or specific <device>.
     -list_dgrp [<dgrp>]     : List all device groups or specific <dgrp>.
     -list_tgrp [<tgrp>]     : List all target groups within a device group.
         [-dev_group <dgrp>]
     -list_driver [<driver>] : List all available drivers or specific <driver>.
     -list_target [<target>] : List all available targets or specific <target>.
         [-driver <driver>]
     -list_group [<group>]   : List all configured groups, or specific <group>.
         [-driver <driver>]
         [-target <target>]

List Attribute Operations
     -list_scst_attr         : List all attributes for SCST.
     -list_hnd_attr <hndlr>  : List all attributes for a given handler.
     -list_dev_attr <device> : List all attributes for a given device.
     -list_drv_attr <driver> : List all attributes for a given driver.
     -list_dgrp_attr <dgrp>  : List all attributes for a given device group.
     -list_tgrp_attr <tgrp>  : List all attributes for a device group/target.
          -dev_group <dgrp>
     -list_ttgt_attr <tgt>   : List all attributes for a target group target.
          -dev_group <dgrp>
          -tgt_group <tgrp>
     -list_tgt_attr <target> : List all attributes for a given driver/target.
          -driver <driver>
     -list_grp_attr <group>  : List all attributes for a given group.
          -driver <driver>
          -target <target>
     -list_lun_attr <lun>    : List all attributes for a driver/target/lun.
          -driver <driver>
          -target <target>
          [-group <group>]
     -list_init_attr <init>  : List all attributes for a driver/target/initiator
          -driver <driver>
          -target <target>
          -group <group>

     -list_sessions          : List all current initiator sessions.

Set Attribute Operations
     -set_scst_attr          : Sets SCST attribute(s) <p> to value <v>.
         -attributes <p=v,...>
     -set_hnd_attr <hndlr>   : Sets handler attribute(s) <p> to value <v>.
         -attributes <p=v,...>
     -set_dev_attr <device>  : Sets device attributes(s) <p> to value <v>.
         -attributes <p=v,...>
     -set_drv_attr <driver>  : Sets driver attribute(s) <p> to value <v>.
         -attributes <p=v,...>
     -set_dgrp_attr <dgrp>   : Sets device group attribute(s) <p> to value <v>.
         -attributes <p=v,...>
     -set_tgrp_attr <tgrp>   : Sets device group/target attribute(s)
                               <p> to value <v>.
         -dev_group <dgrp>
         -attributes <p=v,...>
     -set_ttgt_attr <tgt>    : Set target group target attribute(s)
                               <p> to value <v>.
         -dev_group <dgrp>
         -tgt_group <tgrp>
         -attributes <p=v,...>
     -set_tgt_attr <target>  : Sets target attribute(s) <p> to value <v>.
         -driver <driver>
         -attributes <p=v,...>
     -set_grp_attr <group>   : Sets group attribute(s) <p> to value <v>.
         -driver <driver>
         -target <target>
         -attributes <p=v,...>
     -set_lun_attr <lun>     : Sets LUN attribute(s) <p> to value <v>.
         -driver <driver>
         -target <target>
         [-group <group>]
         -attributes <p=v,...>
     -set_init_attr <init>   : Sets initiator attribute(s) <p> to value <v>.
         -driver <driver>
         -target <target>
         -group <group>
         -attributes <p=v,...>

Add Dynamic Attribute Operations
     -add_drv_attr <driver>  : Adds driver attribute(s) <p> with value <v>.
         -attributes <p=v,...>
     -add_tgt_attr <target>  : Adds target attribute(s) <p> with value <v>.
         -driver <driver>
         -attributes <p=v,...>

Remove Dynamic Attribute Operations
     -rem_drv_attr <driver>  : Remove driver attribute(s) <p> with value <v>.
         -attributes <p=v,...>
     -rem_tgt_attr <target>  : Remove target attribute(s) <p> with value <v>.
         -driver <driver>
         -attributes <p=v,...>

Device Operations
     -open_dev <device>      : Adds a new device using handler <handler>.
         -handler <handler>
         -attributes <p=v,...>
     -resync_dev <device>    : Resync the device size with the initiator(s).
     -close_dev <device>     : Closes a device belonging to handler <handler>.
         -handler <handler>

Device Group Operations
     -add_dgrp <dgrp>        : Add device group <dgrp>.
     -rem_dgrp <dgrp>        : Remove device group <dgrp>.
     -add_dgrp_dev <device>
         -dev_group <dgroup> : Add device <device> to device group <dgrp>.
     -rem_dgrp_dev <device>
         -dev_group <dgroup> : Remove device <device> from device group <dgrp>.
     -add_tgrp <tgrp>
         -tgt_group <tgrp>   : Add target group <tgrp> to device group <dgrp>.
     -rem_tgrp <tgrp>
         -dev_group <dgrp>   : Remove target group <tgrp> from device group.
     -add_tgrp_tgt <tgt>     : Add target <tgt> to specified target group.
         -dev_group <dgrp>
         -tgt_group <tgrp>
     -rem_tgrp_tgt <tgt>     : Remove target <tgt> from specified target group.
         -dev_group <dgrp>
         -tgt_group <tgrp>

Target Operations
     -add_target <target>    : Add a dynamic target to a capable driver.
         -driver <driver>
     -rem_target <target>    : Remove a dynamic target from a driver.
         -driver <driver>

Group Operations
     -add_group <group>      : Add a group to a given driver & target.
         -driver <driver>
         -target <target>
     -rem_group <group>      : Remove a group from a given driver & target.
         -driver <driver>
         -target <target>

Initiator Operations
     -add_init <init>        : Adds an initiator to a group.
         -driver <driver>
         -target <target>
         -group <group>
     -rem_init <user>        : Removes an initiator from a group.
         -driver <driver>
         -target <target>
         -group <group>
     -move_init <init>       : Moves an initiator from one group to another.
         -driver <driver>
         -target <target>
         -group <group 1>
         -to <group 2>
     -clear_inits            : Clear all initiators from a given group.
         -driver <driver>
         -target <target>
         -group <group>

Target LUN Operations
     -add_lun <lun>          : Adds a given device to a group.
         -driver <driver>
         -target <target>
         [-group <group>]
         -device <device>
         -attributes <p=v,...>
     -rem_lun <lun>          : Remove a LUN from a group.
         -driver <driver>
         -target <target>
         [-group <group>]
     -replace_lun <lun>      : Replaces a LUN\'s device with a different one.
         -driver <driver>
         -target <target>
         [-group <group>]
         -device <device>
         -attributes <p=v,...>
     -clear_luns             : Clear all LUNs within a group.
         -driver <driver>
         -target <target>
         [-group <group>]

Target Driver Operations
     -enable_target <t>      : Enable target mode for a given driver & target.
         -driver <driver>
     -disable_target <t>     : Disable target mode for a given driver & target.
         -driver <driver>
     -issue_lip [<t>]
        [-driver <driver>]   : Issue a LIP for a specific driver/target or for
                               all drivers and targets.
     -lip                    : Issue a LIP after having applied FC
                               configuration changes.
     -no_lip                 : Don\'t automatically issue a LIP after having
                               applied FC configuration changes.

Options
     -nonkey                 : When writing a config file or listing attributes,
                               store/print non-key attributes as well.
     -force                  : Force all configuration changes,
                               even deletions (DANGER!).
     -noprompt               : Do not prompt or pause. Use with caution!
     -cont_on_err            : Continue after an error occurred.
	 -skipReads				 : Used with force to skip readingWorkingConfig on device attribute change

Debugging (limited support)
     -debug                  : Debug mode - don\'t do anything destructive.

Examples:
     Open a new device:
       scstadmin -open_dev DISK01 -handler vdisk_fileio \
         -attributes filename=/vdisks/disk01.dsk,read_only

     Setting the T10 Device ID of a device
       scstadmin -set_dev_attr DISK01 -attributes t10_dev_id=0x2345

     Create a new security group:
       scstadmin -add_group HOST01 -driver qla2x00t \
         -target 50:06:0B:00:00:39:71:78

     Add a LUN to a group:
       scstadmin -add_lun 1 -driver qla2x00t -target 50:06:0B:00:00:39:71:78 \
         -group HOST01 -device DISK01 -attributes read_only=1

     Enable target mode for fibre card specifying its WWN
       scstadmin -enable_target 50:06:0B:00:00:39:71:78 -driver qla2x00t

EndUsage
  }

use Cwd qw(abs_path);
use File::Basename;
use File::Spec;

BEGIN {
  my $site_lib = '/usr/share/perl5';
	if ($site_lib =~ '^%') {
		my $scstadmindir = dirname(abs_path($0));
		$site_lib = File::Spec->catdir($scstadmindir, "scst-1.0.0",
					       "blib", "lib");
	}
	unshift(@INC, $site_lib);
}

use SCST::SCST 1.0.0;
use Data::Dumper;
use Getopt::Long;
use IO::File;
use IO::Dir;
use POSIX;

my $_DEF_CONFIG_ = '/etc/scst.conf';

use constant {
TRUE             => 1,
FALSE            => 0,

DEF_CONFIG       => '/etc/scst.conf',
};

my $SCST;
my $CONFIG;
my $CONFIGFILE;
my $_DEBUG_;
my $_NOPROMPT_;
my $_CONT_ON_ERR_;
my $CLUSTERID;
my $MYNAME;
my $MYWWPN1;
my $MYWWPN2;
my $MYWWPN3;
my $MYWWPN4;
my $PEERNAME;
my $PEERWWPN1;
my $PEERWWPN2;
my $PEERWWPN3;
my $PEERWWPN4;
my $PEERBBSID;

my %CURRENT;

$SIG{INT}  = \&commitSuicide;
$SIG{TERM} = \&commitSuicide;

use vars qw($Version);

# Temporary (hopefully) workaround so we don't need to 
# add -force and -noprompt flags in multiple places in
# psrv
unshift(@ARGV, "-force", "-noprompt");

&main();

sub getArgs {
	my $applyConfig;
	my $clearConfig;
	my $writeConfig;
	my $checkConfig;
        my $clearActConfig;
        my $writePeerConfig;
	my $clusterid;
        my $myname;
        my $mywwpn1;
        my $mywwpn2;
        my $mywwpn3;
        my $mywwpn4;
        my $peername;
        my $peerwwpn1;
        my $peerwwpn2;
        my $peerwwpn3;
        my $peerwwpn4;
	my $peerbbsid;

        my $peerQuickConfig;
# 	my $clusterid;
#        my $myname;
#        my $mywwpn1;
#        my $mywwpn2;
#        my $mywwpn3;
#        my $mywwpn4;
#        my $peername;
#        my $peerwwpn1;
#        my $peerwwpn2;
#        my $peerwwpn3;
#        my $peerwwpn4;
#        my $peerbbsid;

	my $listHandler;
	my $listDevice;
	my $listDeviceGroup;
	my $listTargetGroup;
	my $listDriver;
	my $listTarget;
	my $listGroup;
	my $listSessions;

	my $listScstAttr;
	my $listHandlerAttr;
	my $listDeviceAttr;
	my $listDeviceGroupAttr;
	my $listTargetGroupAttr;
	my $listTargetGroupTargetAttr;
	my $listGroupAttr;
	my $listDriverAttr;
	my $listTargetAttr;
	my $listLunAttr;
	my $listInitiatorAttr;

	my $setScstAttr;
	my $setHandlerAttr;
	my $setDeviceAttr;
	my $setDeviceGroupAttr;
	my $setTargetGroupAttr;
	my $setTargetGroupTargetAttr;
	my $setDriverAttr;
	my $setTargetAttr;
	my $setGroupAttr;
	my $setLunAttr;
	my $setInitiatorAttr;

	my $addDriverAttr;
	my $addTargetAttr;
	my $remDriverAttr;
	my $remTargetAttr;

	my $openDev;
	my $closeDev;
	my $resyncDev;

	my $addDevGroup;
	my $removeDevGroup;
	my $addDevGroupDevice;
	my $removeDevGroupDevice;

	my $addTargetGroup;
	my $removeTargetGroup;
	my $addTargetGroupTarget;
	my $removeTargetGroupTarget;

	my $addTarget;
	my $removeTarget;

	my $addGroup;
	my $removeGroup;

	my $addInitiator;
	my $removeInitiator;
	my $moveInitiator;
	my $clearInitiators;

	my $addLun;
	my $removeLun;
	my $replaceLun;
	my $clearLuns;

	my $enableTarget;
	my $disableTarget;
	my $issueLip;
	my $lip;
	my $noLip;

	my $handler;
	my $attributes;

	my $driver;
	my $target;
	my $group;
	my $to;
	my $device;
	my $deviceGroup;
	my $targetGroup;

	my $show_usage;
	my $nonkey;
	my $force;
	my $dumpAttrs;

	my $skipRead;

	my $p = new Getopt::Long::Parser;

	if (!$p->getoptions('config:s'		=> \$applyConfig,
			    'clear_config'	=> \$clearConfig,
			    'write_config=s'	=> \$writeConfig,
			    'check_config:s'	=> \$checkConfig,
                            'clear_act_config'  => \$clearActConfig,
                            'act_peer_config:s' => \$writePeerConfig,
			    'cluster_id:s'	=> \$clusterid,
                            'my_name:s'         => \$myname,
                            'my_wwpn1:s'        => \$mywwpn1,
                            'my_wwpn2:s'        => \$mywwpn2,
                            'my_wwpn3:s'        => \$mywwpn3,
                            'my_wwpn4:s'        => \$mywwpn4,
                            'peer_name:s'       => \$peername,
                            'peer_wwpn1:s'      => \$peerwwpn1,
                            'peer_wwpn2:s'      => \$peerwwpn2,
                            'peer_wwpn3:s'      => \$peerwwpn3,
                            'peer_wwpn4:s'      => \$peerwwpn4,
			    'peer_bbsid:s'      => \$peerbbsid,

                            'peer_quick_config:s' => \$peerQuickConfig,
			    'cluster_id:s'	=> \$clusterid,
                            'my_name:s'         => \$myname,
                            'my_wwpn1:s'        => \$mywwpn1,
                            'my_wwpn2:s'        => \$mywwpn2,
                            'my_wwpn3:s'        => \$mywwpn3,
                            'my_wwpn4:s'        => \$mywwpn4,
                            'peer_name:s'       => \$peername,
                            'peer_wwpn1:s'      => \$peerwwpn1,
                            'peer_wwpn2:s'      => \$peerwwpn2,
                            'peer_wwpn3:s'      => \$peerwwpn3,
                            'peer_wwpn4:s'      => \$peerwwpn4,
                            'peer_bbsid:s'      => \$peerbbsid,

			    'list_handler:s'	=> \$listHandler,
			    'list_device:s'	=> \$listDevice,
			    'list_dgrp:s'	=> \$listDeviceGroup,
			    'list_tgrp:s'	=> \$listTargetGroup,
			    'list_driver:s'	=> \$listDriver,
			    'list_target:s'	=> \$listTarget,
			    'list_group:s'	=> \$listGroup,
			    'list_sessions'	=> \$listSessions,

			    'list_scst_attr'	=> \$listScstAttr,
			    'list_hnd_attr=s'	=> \$listHandlerAttr,
			    'list_dev_attr=s'	=> \$listDeviceAttr,
			    'list_dgrp_attr=s'	=> \$listDeviceGroupAttr,
			    'list_tgrp_attr=s'	=> \$listTargetGroupAttr,
			    'list_ttgt_attr=s'	=> \$listTargetGroupTargetAttr,
			    'list_drv_attr=s'	=> \$listDriverAttr,
			    'list_tgt_attr=s'	=> \$listTargetAttr,
			    'list_grp_attr=s'	=> \$listGroupAttr,
			    'list_lun_attr=s'	=> \$listLunAttr,
			    'list_init_attr=s'	=> \$listInitiatorAttr,

			    'set_scst_attr'	=> \$setScstAttr,
			    'set_hnd_attr=s'	=> \$setHandlerAttr,
			    'set_dev_attr=s'	=> \$setDeviceAttr,
			    'set_dgrp_attr=s'	=> \$setDeviceGroupAttr,
			    'set_tgrp_attr=s'	=> \$setTargetGroupAttr,
			    'set_ttgt_attr=s'	=> \$setTargetGroupTargetAttr,
			    'set_drv_attr=s'	=> \$setDriverAttr,
			    'set_tgt_attr=s'	=> \$setTargetAttr,
			    'set_grp_attr=s'	=> \$setGroupAttr,
			    'set_lun_attr=s'	=> \$setLunAttr,
			    'set_init_attr=s'	=> \$setInitiatorAttr,

			    'add_drv_attr=s'	=> \$addDriverAttr,
			    'add_tgt_attr=s'	=> \$addTargetAttr,
			    'rem_drv_attr=s'	=> \$remDriverAttr,
			    'rem_tgt_attr=s'	=> \$remTargetAttr,

			    'open_dev=s'	=> \$openDev,
			    'close_dev=s'	=> \$closeDev,
			    'resync_dev=s'	=> \$resyncDev,

			    'add_dgrp=s'	=> \$addDevGroup,
			    'rem_dgrp=s'	=> \$removeDevGroup,
			    'add_dgrp_dev=s'	=> \$addDevGroupDevice,
			    'rem_dgrp_dev=s'	=> \$removeDevGroupDevice,

			    'add_tgrp=s'	=> \$addTargetGroup,
			    'rem_tgrp=s'	=> \$removeTargetGroup,
			    'add_tgrp_tgt=s'	=> \$addTargetGroupTarget,
			    'rem_tgrp_tgt=s'	=> \$removeTargetGroupTarget,

			    'add_target=s'	=> \$addTarget,
			    'rem_target=s'	=> \$removeTarget,

			    'add_group=s'	=> \$addGroup,
			    'rem_group=s'	=> \$removeGroup,

			    'add_init=s'	=> \$addInitiator,
			    'rem_init=s'	=> \$removeInitiator,
			    'move_init=s'	=> \$moveInitiator,
			    'clear_inits'	=> \$clearInitiators,

			    'add_lun=s'		=> \$addLun,
			    'rem_lun=s'		=> \$removeLun,
			    'replace_lun=s'	=> \$replaceLun,
			    'clear_luns'	=> \$clearLuns,

			    'enable_target=s'	=> \$enableTarget,
			    'disable_target=s'	=> \$disableTarget,
			    'issue_lip:s'	=> \$issueLip,
			    'lip'		=> \$lip,
			    'no_lip'		=> \$noLip,

			    'handler=s'		=> \$handler,
			    'attributes=s'	=> \$attributes,

			    'driver=s'		=> \$driver,
			    'target=s'		=> \$target,
			    'group=s'		=> \$group,
			    'to=s'		=> \$to,
			    'device=s'		=> \$device,
			    'dev_group=s'	=> \$deviceGroup,
			    'tgt_group=s'	=> \$targetGroup,

			    'h'			=> \$show_usage,
			    'help'		=> \$show_usage,

			    'nonkey'		=> \$nonkey,
			    'noprompt'		=> \$_NOPROMPT_,
			    'cont_on_err'       => \$_CONT_ON_ERR_,
			    'force'		=> \$force,
				'skipRead'	=> \$skipRead,
			    'dumpAttrs'		=> \$dumpAttrs,
			    'debug'             => \$_DEBUG_))
	{
		exit 1;
	}

	if (defined($show_usage)) {
		usage();
		exit 0;
	}

	$_DEBUG_ = TRUE if (defined($_DEBUG_));
	$_NOPROMPT_ = TRUE if (defined($_NOPROMPT_));
	$_CONT_ON_ERR_ = TRUE if (defined($_CONT_ON_ERR_));

	$force  = TRUE if (defined($force));
	$nonkey = TRUE if (defined($nonkey));
	$lip    = TRUE if (defined($lip));
	$noLip  = TRUE if (defined($noLip));
	$skipRead  = TRUE if (defined($skipRead));

	my $query_mode = defined($listHandler) || defined($listDevice) || defined($listDeviceGroup) || defined($listTargetGroup) ||
	  defined($listDriver) || defined($listTarget) || defined($listGroup) || defined($listSessions) ||
	  defined($listScstAttr) || defined($listHandlerAttr) || defined($listDeviceAttr) || defined($listDriverAttr) ||
	  defined($listTargetAttr) || defined($listGroupAttr) || defined($listLunAttr) || defined($listInitiatorAttr) ||
	  defined($listDeviceGroupAttr) || defined($listTargetGroupAttr) || defined($listTargetGroupTargetAttr);

	my $set_mode = defined($setScstAttr) + defined($setHandlerAttr) + defined($setDeviceAttr) +
	  defined($setDriverAttr) + defined($setTargetAttr) + defined($setGroupAttr) +
	  defined($setLunAttr) + defined($setInitiatorAttr) + defined($setDeviceGroupAttr) +
	  defined($setTargetGroupAttr) + defined($setTargetGroupTargetAttr);

	my $op_mode = defined($clearConfig) + defined($writeConfig) + defined($checkConfig) + 
             defined($clearActConfig) + defined($writePeerConfig) + defined($peerQuickConfig) +
             defined($openDev) + defined($closeDev) + defined($addDevGroup) + defined($removeDevGroup) +
	     defined($addTargetGroup) + defined($removeTargetGroup) +
	     defined($addTargetGroupTarget) + defined($removeTargetGroupTarget) +
	     defined($addGroup) + defined($removeGroup) + defined($addDevGroupDevice) + defined($removeDevGroupDevice) +
	     defined($addInitiator) + defined($removeInitiator) + defined($clearInitiators) +
	     defined($addDriverAttr) + defined($addTargetAttr) + defined($remDriverAttr) + defined($remTargetAttr) +
	     defined($addTarget) + defined($removeTarget) +
	     defined($addLun) + defined($removeLun) + defined($replaceLun) + defined($clearLuns) +
	     defined($enableTarget) + defined($disableTarget) + defined($issueLip);

	if (($query_mode + $set_mode + $op_mode) > 1) {
		print "Please specify only one non-query operation at a time.\n";
		exit 1;
	}

	if (defined($clearConfig) && !$force) {
		print "Please specify -force with -clear_config.\n";
		exit 1;
	}

	if (defined($clearActConfig) && !$force) {
		print "Please specify -force with -clear_act_config.\n";
		exit 1; 
	}       

	if (defined($listTargetGroup) && !defined($deviceGroup)) {
		print "Please specify -dev_group with -list_tgrp.\n";
		exit 1;
	}

	if (defined($listTargetAttr) && !defined($driver)) {
		print "Please specify -driver with -list_tgt_attr.\n";
		exit 1;
	}

	if (defined($listGroupAttr) && (!defined($driver) || !defined($target))) {
		print "Please specify -driver, -target and group with -list_grp_attr.\n";
		exit 1;
	}

	if (defined($listLunAttr) && (!defined($driver) || !defined($target))) {
		print "Please specify -driver and -target with -list_lun_attr.\n";
		exit 1;
	}

	if (defined($listInitiatorAttr) && (!defined($driver) || !defined($target) || !defined($group))) {
		print "Please specify -driver, -target and -group with -list_init_attr.\n";
		exit 1;
	}

	if (defined($listTargetGroupAttr) && !defined($deviceGroup)) {
		print "Please specify -dev_group with -list_tgrp_attr.\n";
		exit 1;
	}

	if (defined($listTargetGroupTargetAttr) && (!defined($deviceGroup) || !defined($targetGroup))) {
		print "Please specify -dev_group and -tgt_group with -list_ttgt_attr.\n";
		exit 1;
	}

	if (defined($setScstAttr) && !defined($attributes)) {
		print "Please specify -attributes with -set_scst_attr.\n";
		exit 1;
	}

	if (defined($setHandlerAttr) && !defined($attributes)) {
		print "Please specify -attributes with -set_hnd_attr.\n";
		exit 1;
	}

	if (defined($setDeviceAttr) && !defined($attributes)) {
		print "Please specify -attributes with -set_dev_attr.\n";
		exit 1;
	}

	if (defined($setDeviceGroupAttr) && !defined($attributes)) {
		print "Please specify -attributes with -set_dgrp_attr.\n";
		exit 1;
	}

	if (defined($setTargetGroupAttr) && (!defined($deviceGroup) || !defined($attributes))) {
		print "Please specify -dev_group and -attributes with -set_tgrp_attr.\n";
		exit 1;
	}

	if (defined($setTargetGroupTargetAttr) && (!defined($deviceGroup) || !defined($targetGroup) || !defined($attributes))) {
		print "Please specify -dev_group -tgt_group and -attributes with -set_ttgt_attr.\n";
		exit 1;
	}

	if (defined($setDriverAttr) && !defined($attributes)) {
		print "Please specify -attributes with -set_drv_attr.\n";
		exit 1;
	}

	if (defined($setTargetAttr) && (!defined($driver) || !defined($attributes))) {
		print "Please specify -driver and -attributes with -set_tgt_attr.\n";
		exit 1;
	}

	if (defined($setGroupAttr) && (!defined($driver) || !defined($target) || !defined($attributes))) {
		print "Please specify -driver -target and -attributes with -set_grp_attr.\n";
		exit 1;
	}

	if (defined($setLunAttr) &&
	    (!defined($driver) || !defined($target) || !defined($attributes))) {
		print "Please specify -driver -target -group and -attributes with -set_lun_attr.\n";
		exit 1;
	}

	if (defined($setInitiatorAttr) &&
	    (!defined($driver) || !defined($target) || !defined($group) || !defined($attributes))) {
		print "Please specify -driver -target -group and -attributes with -set_init_attr.\n";
		exit 1;
	}

	if (defined($addDriverAttr) && !defined($attributes)) {
		print "Please specify -attributes with -add_drv_attr.\n";
		exit 1;
	}

	if (defined($addTargetAttr) &&
	    (!defined($driver) || !defined($attributes))) {
		print "Please specify -driver and -attributes with -add_tgt_attr.\n";
		exit 1;
	}

	if (defined($remDriverAttr) && !defined($attributes)) {
		print "Please specify -attributes with -rem_drv_attr.\n";
		exit 1;
	}

	if (defined($remTargetAttr) &&
	    (!defined($driver) || !defined($attributes))) {
		print "Please specify -driver and -attributes with -rem_tgt_attr.\n";
		exit 1;
	}

	if ((defined($openDev) || defined($closeDev)) && !defined($handler)) {
		print "Please specify -handler with -open_dev/-close_dev.\n";
		exit 1;
	}

	if (defined($addTarget) && !defined($driver)) {
		print "Please specify -driver with -add_target.\n";
		exit 1;
	}

	if (defined($removeTarget) && !defined($driver)) {
		print "Please specify -driver with -rem_target.\n";
		exit 1;
	}

	if ((defined($addGroup) || defined($removeGroup)) &&
	    (!defined($driver) || !defined($target))) {
		print "Please specify -driver and -target with -add_group/-rem_group.\n";
		exit 1;
	}

	if ((defined($addInitiator) || defined($removeInitiator) || defined($clearInitiators)) &&
	    (!defined($target) || !defined($driver) || !defined($group))) {
		print "Please specify -driver -target and -group with ".
		  "-add_init/-rem_init/-clear_inits.\n";
		exit 1;
	}

	if (defined($moveInitiator) &&
	    (!defined($driver) || !defined($target) || !defined($group) || !defined($to))) {
		print "Please specify -driver -target -group and -to with -move_init.\n";
		exit 1;
	}

	if ((defined($addLun) || defined($replaceLun)) &&
	    (!defined($driver) || !defined($target) || !defined($device))) {
		print "Please specify -driver -target and -device with -add_lun/-replace_lun.\n";
		exit 1;
	}

	if ((defined($clearLuns) || defined($removeLun)) && (!defined($driver) || !defined($target))) {
		print "Please specify -driver and -target with -rem_lun/-clear_luns.\n";
		exit 1;
	}

	if ((defined($addDevGroupDevice) || defined($removeDevGroupDevice)) && !defined($deviceGroup)) {
		print "Please specify -dev_group with -add_dgrp_dev/-rem_dgrp_dev.\n";
		exit 1;
	}

	if ((defined($addTargetGroup) || defined($removeTargetGroup)) && !defined($deviceGroup)) {
		print "Please specify -dev_group with -add_tgrp/-rem_tgrp.\n";
		exit 1;
	}

	if ((defined($addTargetGroupTarget) || defined($removeTargetGroupTarget)) &&
	    (!defined($deviceGroup) || !defined($targetGroup))) {
		print "Please specify -dev_group and -tgt_group with -add_tgrp_tgt/-rem_tgrp_tgt.\n";
		exit 1;
	}

	$applyConfig = $_DEF_CONFIG_ if (defined($applyConfig) && ($applyConfig eq ''));
	$checkConfig = $_DEF_CONFIG_ if (defined($checkConfig) && ($checkConfig eq ''));

	my %_attributes;
	if ($attributes) {
		foreach my $attribute (split(/\,/, $attributes)) {
			my $value;

			if ($attribute !~ /\=/) {
				$value = TRUE;
			} else {
				($attribute, $value) = split(/\=/, $attribute, 2);
			}

			$_attributes{$attribute} = $value;
		}
	}

	my %args = (
		applyConfig			=> $applyConfig,
		clearConfig			=> $clearConfig,
		writeConfig			=> $writeConfig,
		checkConfig			=> $checkConfig,
                clearActConfig                  => $clearActConfig,
                writePeerConfig                 => $writePeerConfig,
		clusterid			=> $clusterid,
                myname                          => $myname,
                mywwpn1                         => $mywwpn1,
                mywwpn2                         => $mywwpn2,
                mywwpn3                         => $mywwpn3,
                mywwpn4                         => $mywwpn4,
                peername                        => $peername,
                peerwwpn1                       => $peerwwpn1,
                peerwwpn2                       => $peerwwpn2,
                peerwwpn3                       => $peerwwpn3,
                peerwwpn4                       => $peerwwpn4,
		peerbbsid                       => $peerbbsid,

                peerQuickConfig                 => $peerQuickConfig,
		clusterid			=> $clusterid,
                myname                          => $myname,
                mywwpn1                         => $mywwpn1,
                mywwpn2                         => $mywwpn2,
                mywwpn3                         => $mywwpn3,
                mywwpn4                         => $mywwpn4,
                peername                        => $peername,
                peerwwpn1                       => $peerwwpn1,
                peerwwpn2                       => $peerwwpn2,
                peerwwpn3                       => $peerwwpn3,
                peerwwpn4                       => $peerwwpn4,
                peerbbsid                       => $peerbbsid,

		listScstAttr			=> $listScstAttr,
		listHandler			=> $listHandler,
		listDevice			=> $listDevice,
		listDeviceGroup			=> $listDeviceGroup,
		listTargetGroup			=> $listTargetGroup,
		listDriver			=> $listDriver,
		listTarget			=> $listTarget,
		listGroup			=> $listGroup,

		listSessions			=> $listSessions,
		listHandlerAttr			=> $listHandlerAttr,
		listDeviceAttr			=> $listDeviceAttr,
		listDriverAttr			=> $listDriverAttr,
		listTargetAttr			=> $listTargetAttr,

		listDeviceGroupAttr		=> $listDeviceGroupAttr,
		listTargetGroupAttr		=> $listTargetGroupAttr,
		listTargetGroupTargetAttr	=> $listTargetGroupTargetAttr,

		listGroupAttr			=> $listGroupAttr,
		listLunAttr			=> $listLunAttr,
		listInitiatorAttr		=> $listInitiatorAttr,
		setScstAttr			=> $setScstAttr,
		setHandlerAttr			=> $setHandlerAttr,

		setDeviceAttr			=> $setDeviceAttr,
		setDriverAttr			=> $setDriverAttr,
		setTargetAttr			=> $setTargetAttr,
		setGroupAttr			=> $setGroupAttr,
		setLunAttr			=> $setLunAttr,
		setInitiatorAttr		=> $setInitiatorAttr,

		setDeviceGroupAttr		=> $setDeviceGroupAttr,
		setTargetGroupAttr		=> $setTargetGroupAttr,
		setTargetGroupTargetAttr	=> $setTargetGroupTargetAttr,

		addDriverAttr			=> $addDriverAttr,
		addTargetAttr			=> $addTargetAttr,
		remDriverAttr			=> $remDriverAttr,
		remTargetAttr			=> $remTargetAttr,

                openDev				=> $openDev,
		closeDev			=> $closeDev,
		resyncDev			=> $resyncDev,

		addDevGroup			=> $addDevGroup,
		removeDevGroup			=> $removeDevGroup,
		addDevGroupDevice		=> $addDevGroupDevice,
		removeDevGroupDevice		=> $removeDevGroupDevice,

		addTargetGroup			=> $addTargetGroup,
		removeTargetGroup		=> $removeTargetGroup,
		addTargetGroupTarget		=> $addTargetGroupTarget,
		removeTargetGroupTarget		=> $removeTargetGroupTarget,

		addTarget			=> $addTarget,
		removeTarget			=> $removeTarget,

		addGroup			=> $addGroup,
		removeGroup			=> $removeGroup,

		addInitiator			=> $addInitiator,
		removeInitiator			=> $removeInitiator,
		moveInitiator			=> $moveInitiator,
		clearInitiators			=> $clearInitiators,

		addLun				=> $addLun,
		removeLun			=> $removeLun,
		replaceLun			=> $replaceLun,
		clearLuns			=> $clearLuns,

		enableTarget			=> $enableTarget,
		disableTarget			=> $disableTarget,
		issueLip			=> $issueLip,
		lip				=> $lip,
		noLip				=> $noLip,

		handler				=> $handler,
		attributes			=> \%_attributes,

		driver				=> $driver,
		target				=> $target,
		group				=> $group,
		to				=> $to,
		device				=> $device,
		deviceGroup			=> $deviceGroup,
		targetGroup			=> $targetGroup,

		nonkey				=> $nonkey,
		force				=> $force,
		dumpAttrs			=> $dumpAttrs,
		skipRead 			=> $skipRead,
	    );
	return \%args;
}

sub main {
	STDOUT->autoflush(1);

	# We need to run as root
	if ( $> ) {die("This program must run as root.\n");}

	my $args = getArgs();

	my $applyConfig			= $args->{applyConfig};
	my $clearConfig			= $args->{clearConfig};
	my $writeConfig			= $args->{writeConfig};
	my $checkConfig			= $args->{checkConfig};
        my $clearActConfig              = $args->{clearActConfig};
        my $writePeerConfig             = $args->{writePeerConfig};
	my $clusterid			= $args->{clusterid};
        my $myname                      = $args->{myname};
        my $mywwpn1                     = $args->{mywwpn1};
        my $mywwpn2                     = $args->{mywwpn2};
        my $mywwpn3                     = $args->{mywwpn3};
        my $mywwpn4                     = $args->{mywwpn4};
        my $peername                    = $args->{peername};
        my $peerwwpn1                   = $args->{peerwwpn1};
        my $peerwwpn2                   = $args->{peerwwpn2};
        my $peerwwpn3                   = $args->{peerwwpn3};
        my $peerwwpn4                   = $args->{peerwwpn4};
	my $peerbbsid                   = $args->{peerbbsid};

        my $peerQuickConfig             = $args->{peerQuickConfig};
#	my $clusterid			= $args->{clusterid};
#        my $myname                      = $args->{myname};
#        my $mywwpn1                     = $args->{mywwpn1};
#        my $mywwpn2                     = $args->{mywwpn2};
#        my $mywwpn3                     = $args->{mywwpn3};
#        my $mywwpn4                     = $args->{mywwpn4};
#        my $peername                    = $args->{peername};
#        my $peerwwpn1                   = $args->{peerwwpn1};
#        my $peerwwpn2                   = $args->{peerwwpn2};
#        my $peerwwpn3                   = $args->{peerwwpn3};
#        my $peerwwpn4                   = $args->{peerwwpn4};
#        my $peerbbsid                   = $args->{peerbbsid};

	my $listScstAttr		= $args->{listScstAttr};
	my $listHandler			= $args->{listHandler};
	my $listDevice			= $args->{listDevice};
	my $listDeviceGroup		= $args->{listDeviceGroup};
	my $listTargetGroup		= $args->{listTargetGroup};
	my $listDriver			= $args->{listDriver};
	my $listTarget			= $args->{listTarget};
	my $listGroup			= $args->{listGroup};

	my $listSessions		= $args->{listSessions};
	my $listHandlerAttr		= $args->{listHandlerAttr};
	my $listDeviceAttr		= $args->{listDeviceAttr};
	my $listDriverAttr		= $args->{listDriverAttr};
	my $listTargetAttr		= $args->{listTargetAttr};

	my $listDeviceGroupAttr		= $args->{listDeviceGroupAttr};
	my $listTargetGroupAttr		= $args->{listTargetGroupAttr};
	my $listTargetGroupTargetAttr	= $args->{listTargetGroupTargetAttr};

	my $listGroupAttr		= $args->{listGroupAttr};
	my $listLunAttr			= $args->{listLunAttr};
	my $listInitiatorAttr		= $args->{listInitiatorAttr};
	my $setScstAttr			= $args->{setScstAttr};
	my $setHandlerAttr		= $args->{setHandlerAttr};

	my $setDeviceAttr		= $args->{setDeviceAttr};
	my $setDriverAttr		= $args->{setDriverAttr};
	my $setTargetAttr		= $args->{setTargetAttr};
	my $setGroupAttr		= $args->{setGroupAttr};
	my $setLunAttr			= $args->{setLunAttr};
	my $setInitiatorAttr		= $args->{setInitiatorAttr};

	my $setDeviceGroupAttr		= $args->{setDeviceGroupAttr};
	my $setTargetGroupAttr		= $args->{setTargetGroupAttr};
	my $setTargetGroupTargetAttr	= $args->{setTargetGroupTargetAttr};

	my $addDriverAttr		= $args->{addDriverAttr};
	my $addTargetAttr		= $args->{addTargetAttr};
	my $remDriverAttr		= $args->{remDriverAttr};
	my $remTargetAttr		= $args->{remTargetAttr};

	my $openDev			= $args->{openDev};
	my $closeDev			= $args->{closeDev};
	my $resyncDev			= $args->{resyncDev};

	my $addDevGroup			= $args->{addDevGroup};
	my $removeDevGroup		= $args->{removeDevGroup};
	my $addDevGroupDevice		= $args->{addDevGroupDevice};
	my $removeDevGroupDevice	= $args->{removeDevGroupDevice};

	my $addTargetGroup		= $args->{addTargetGroup};
	my $removeTargetGroup		= $args->{removeTargetGroup};
	my $addTargetGroupTarget	= $args->{addTargetGroupTarget};
	my $removeTargetGroupTarget	= $args->{removeTargetGroupTarget};

	my $addTarget			= $args->{addTarget};
	my $removeTarget		= $args->{removeTarget};

	my $addGroup			= $args->{addGroup};
	my $removeGroup			= $args->{removeGroup};

	my $addInitiator		= $args->{addInitiator};
	my $removeInitiator		= $args->{removeInitiator};
	my $moveInitiator		= $args->{moveInitiator};
	my $clearInitiators		= $args->{clearInitiators};

	my $addLun			= $args->{addLun};
	my $removeLun			= $args->{removeLun};
	my $replaceLun			= $args->{replaceLun};
	my $clearLuns			= $args->{clearLuns};

	my $enableTarget		= $args->{enableTarget};
	my $disableTarget		= $args->{disableTarget};
	my $issueLip			= $args->{issueLip};
	my $lip				= $args->{lip};
	my $noLip			= $args->{noLip};

	my $handler			= $args->{handler};
	my $attributes			= $args->{attributes};

	my $driver			= $args->{driver};
	my $target			= $args->{target};
	my $group			= $args->{group};
	my $to				= $args->{to};
	my $device			= $args->{device};
	my $deviceGroup			= $args->{deviceGroup};
	my $targetGroup			= $args->{targetGroup};

	my $nonkey			= $args->{nonkey};
	my $force			= $args->{force};
	my $dumpAttrs			= $args->{dumpAttrs};
	my $skipRead			= $args->{skipRead};

	$SCST = new SCST::SCST($_DEBUG_);

	my $rc = readWorkingConfig($force);
	exit $rc if ($rc);

	my $all_good;

	SWITCH: {
		defined($applyConfig) && do {
			$CONFIGFILE = $applyConfig;
			$rc = checkConfiguration();
			condExit("Configuration has errors, aborting.") if ($rc);
			last if ($force && prompt());
			my $changes = applyConfiguration($force, $skipRead);
			$rc = issueLip() if ($changes && $lip);
			last SWITCH;
		};
		defined($checkConfig) && do {
			$CONFIGFILE = $checkConfig;
			$rc = checkConfiguration();
			last SWITCH;
		};
		defined($writeConfig) && do {
			$CONFIGFILE = $writeConfig;
			$rc = writeConfiguration($nonkey);
			last SWITCH;
		};
		defined($clearConfig) && do {
			last if (prompt());
			$rc = clearConfiguration();
			$rc = issueLip() if (!$rc && $lip);
			last SWITCH;
		};
                defined($writePeerConfig) && do { 
                        $CONFIGFILE = $writePeerConfig;
			$CLUSTERID = $clusterid;
                        $MYNAME    = $myname;
                        $PEERNAME  = $peername;
                        $PEERWWPN1 = $peerwwpn1;
                        $PEERWWPN2 = $peerwwpn2;
                        $PEERWWPN3 = $peerwwpn3;
                        $PEERWWPN4 = $peerwwpn4;
			$PEERBBSID = $peerbbsid;
                        $MYWWPN1   = $mywwpn1;
                        $MYWWPN2   = $mywwpn2;
                        $MYWWPN3   = $mywwpn3;
                        $MYWWPN4   = $mywwpn4;
                        $rc = writePeerConfiguration($nonkey);
                        last SWITCH; 
                };
                defined($peerQuickConfig) && do {
                        $CONFIGFILE = $peerQuickConfig;
			$CLUSTERID = $clusterid;
                        $MYNAME    = $myname;
                        $PEERNAME  = $peername;
                        $PEERWWPN1 = $peerwwpn1;
                        $PEERWWPN2 = $peerwwpn2;
                        $PEERWWPN3 = $peerwwpn3;
                        $PEERWWPN4 = $peerwwpn4;
                        $PEERBBSID = $peerbbsid;
                        $MYWWPN1   = $mywwpn1;
                        $MYWWPN2   = $mywwpn2;
                        $MYWWPN3   = $mywwpn3;
                        $MYWWPN4   = $mywwpn4;
                        $rc = peerQuickConfiguration($nonkey);
                        last SWITCH;
                };
                defined($clearActConfig) && do { 
                        last if (prompt());
                        $rc = clearActifioConfig();
                        $rc = issueLip() if (!$rc && $lip);
                        last SWITCH; 
                };      
		defined($listHandler) && do {
			$rc = listHandlers($listHandler);
			$all_good = TRUE;
		};
		defined($listDevice) && do {
			$rc = listDevices($listDevice, $nonkey);
			$all_good = TRUE;
		};
		defined($listDeviceGroup) && do {
			$rc = listDeviceGroups($listDeviceGroup);
			$all_good = TRUE;
		};
		defined($listTargetGroup) && do {
			$rc = listTargetGroups($deviceGroup, $listTargetGroup);
			$all_good = TRUE;
		};
		defined($listDriver) && do {
			$rc = listDrivers($listDriver);
			$all_good = TRUE;
		};
		defined($listTarget) && do {
			$rc = listTargets($driver, $listTarget);
			$all_good = TRUE;
		};
		defined($listGroup) && do {
			$rc = listGroups($driver, $target, $listGroup);
			$all_good = TRUE;
		};
		defined($listSessions) && do {
			$rc = listSessions();
			$all_good = TRUE;
		};
		defined($listScstAttr) && do {
			$rc = listScstAttributes($nonkey);
			$all_good = TRUE;
		};
		defined($listHandlerAttr) && do {
			$rc = listHandlerAttributes($listHandlerAttr, $nonkey);
			$all_good = TRUE;
		};
		defined($listDeviceAttr) && do {
			$rc = listDevice($listDeviceAttr, $nonkey);
			$all_good = TRUE;
		};
		defined($listDriverAttr) && do {
			$rc = listDriverAttributes($listDriverAttr, $nonkey);
			$all_good = TRUE;
		};
		defined($listTargetAttr) && do {
			$rc = listTargetAttributes($driver, $listTargetAttr, $nonkey);
			$all_good = TRUE;
		};
		defined($listGroupAttr) && do {
			$rc = listGroupAttributes($driver, $target, $listGroupAttr, $nonkey);
			$all_good = TRUE;
		};
		defined($listLunAttr) && do {
			$rc = listLunAttributes($driver, $target, $group, $listLunAttr, $nonkey);
			$all_good = TRUE;
		};
		defined($listInitiatorAttr) && do {
			$rc = listInitiatorAttributes($driver, $target, $group, $listInitiatorAttr, $nonkey);
			$all_good = TRUE;
		};
		defined($listDeviceGroupAttr) && do {
			$rc = listDeviceGroupAttributes($listDeviceGroupAttr, $nonkey);
			$all_good = TRUE;
		};
		defined($listTargetGroupAttr) && do {
			$rc = listTargetGroupAttributes($deviceGroup, $listTargetGroupAttr, $nonkey);
			$all_good = TRUE;
		};
		defined($listTargetGroupTargetAttr) && do {
			$rc = listTargetGroupTargetAttributes($deviceGroup, $targetGroup, $listTargetGroupTargetAttr, $nonkey);
			$all_good = TRUE;
		};
		defined($setScstAttr) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			my $changes = setScstAttributes($attributes, TRUE);
			print "\t-> Done, $changes change(s) made.\n";
			last SWITCH;
		};
		defined($setHandlerAttr) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			my $changes = setHandlerAttributes($setHandlerAttr, $attributes, TRUE);
			print "\t-> Done, $changes change(s) made.\n";
			last SWITCH;
		};
		defined($setDeviceAttr) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			my $changes = setDeviceAttributes($setDeviceAttr, $attributes, TRUE);
			print "\t-> Done, $changes change(s) made.\n";
			last SWITCH;
		};
		defined($setDriverAttr) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			my $changes = setDriverAttributes($setDriverAttr, $attributes, FALSE);
			print "\t-> Done, $changes change(s) made.\n";
			last SWITCH;
		};
		defined($setTargetAttr) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			my $changes = setTargetAttributes($driver, $setTargetAttr, $attributes, FALSE);
			print "\t-> Done, $changes change(s) made.\n";
			last SWITCH;
		};
		defined($setGroupAttr) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			my $changes = setGroupAttributes(undef, $driver, $target, $setGroupAttr, $attributes, TRUE);
			print "\t-> Done, $changes change(s) made.\n";
			last SWITCH;
		};
		defined($setLunAttr) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			my $changes = setLunAttributes($driver, $target, $setLunAttr, $attributes, $group, TRUE);
			print "\t-> Done, $changes change(s) made.\n";
			last SWITCH;
		};
		defined($setInitiatorAttr) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			my $changes = setInitiatorAttributes($driver, $target, $group, $setInitiatorAttr, $attributes, TRUE);
			print "\t-> Done, $changes change(s) made.\n";
			last SWITCH;
		};
		defined($setDeviceGroupAttr) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			my $changes = setDeviceGroupAttributes($setDeviceGroupAttr, $attributes, TRUE);
			print "\t-> Done, $changes change(s) made.\n";
			last SWITCH;
		};
		defined($setTargetGroupAttr) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			my $changes = setTargetGroupAttributes($deviceGroup, $setTargetGroupAttr, $attributes, TRUE);
			print "\t-> Done, $changes change(s) made.\n";
			last SWITCH;
		};
		defined($setTargetGroupTargetAttr) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			my $changes = setTargetGroupTargetAttributes($deviceGroup, $targetGroup, $setTargetGroupTargetAttr, $attributes, TRUE);
			print "\t-> Done, $changes change(s) made.\n";
			last SWITCH;
		};
		defined($addDriverAttr) && do {
			print "\n-> Making requested changes.\n";
			$rc = addDriverDynamicAttributes($addDriverAttr, $attributes);
			$rc = issueLip() if (!$rc && $lip);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($addTargetAttr) && do {
			print "\n-> Making requested changes.\n";
			$rc = addTargetDynamicAttributes($driver, $addTargetAttr, $attributes);
			$rc = issueLip() if (!$rc && $lip);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($remDriverAttr) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			$rc = removeDriverDynamicAttributes($remDriverAttr, $attributes);
			$rc = issueLip() if (!$rc && $lip);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($remTargetAttr) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			$rc = removeTargetDynamicAttributes($driver, $remTargetAttr, $attributes);
			$rc = issueLip() if (!$rc && $lip);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($openDev) && do {
			print "\n-> Making requested changes.\n";
			$rc = openDevice($handler, $openDev, $attributes);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($closeDev) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			$rc = closeDevice($handler, $closeDev, $force);
			$rc = issueLip() if (!$rc && $lip);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($resyncDev) && do {
			print "\n-> Making requested changes.\n";
			$rc = resyncDevice($resyncDev);
			$rc = issueLip() if (!$rc && $lip);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($addDevGroup) && do {
			print "\n-> Making requested changes.\n";
			$rc = addDeviceGroup($addDevGroup);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($removeDevGroup) && do {
			print "\n-> Making requested changes.\n";
			$rc = removeDeviceGroup($removeDevGroup, $force);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($addDevGroupDevice) && do {
			print "\n-> Making requested changes.\n";
			$rc = addDeviceGroupDevice($deviceGroup, $addDevGroupDevice);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($removeDevGroupDevice) && do {
			print "\n-> Making requested changes.\n";
			$rc = removeDeviceGroupDevice($deviceGroup, $removeDevGroupDevice, $force);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($addTargetGroup) && do {
			print "\n-> Making requested changes.\n";
			$rc = addTargetGroup($deviceGroup, $addTargetGroup);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($removeTargetGroup) && do {
			print "\n-> Making requested changes.\n";
			$rc = removeTargetGroup($deviceGroup, $removeTargetGroup, $force);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($addTargetGroupTarget) && do {
			print "\n-> Making requested changes.\n";
			$rc = addTargetGroupTarget($deviceGroup, $targetGroup, $addTargetGroupTarget);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($removeTargetGroupTarget) && do {
			print "\n-> Making requested changes.\n";
			$rc = removeTargetGroupTarget($deviceGroup, $targetGroup, $removeTargetGroupTarget, $force);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($addTarget) && do {
			print "\n-> Making requested changes.\n";
			$rc = addVirtualTarget($driver, $addTarget, $attributes);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($removeTarget) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			$rc = removeVirtualTarget($driver, $removeTarget);
			$rc = issueLip($driver) if (!$rc && $lip);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($addGroup) && do {
			print "\n-> Making requested changes.\n";
			$rc = addGroup($driver, $target, $addGroup);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($removeGroup) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			$rc = removeGroup($driver, $target, $removeGroup, $force);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($addInitiator) && do {
			print "\n-> Making requested changes.\n";
			$rc = addInitiator($driver, $target, $group, $addInitiator);
			$rc = issueLip($driver, $target) if (!$rc && $lip);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($removeInitiator) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			$rc = removeInitiator($driver, $target, $group, $removeInitiator);
			$rc = issueLip($driver, $target) if (!$rc && $lip);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($moveInitiator) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			$rc = moveInitiator($driver, $target, $group, $moveInitiator, $to);
			$rc = issueLip($driver, $target) if (!$rc && $lip);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($clearInitiators) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			$rc = clearInitiators($driver, $target, $group);
			$rc = issueLip($driver, $target) if (!$rc && $lip);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($addLun) && do {
			print "\n-> Making requested changes.\n";
			$rc = addLun($driver, $target, $device, $addLun, $attributes, $group);
			$rc = issueLip($driver, $target) if (!$rc && $lip);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($removeLun) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			$rc = removeLun($driver, $target, $removeLun, $group);
			$rc = issueLip($driver, $target) if (!$rc && $lip);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($replaceLun) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			$rc = replaceLun($driver, $target, $group, $replaceLun, $device, $attributes);
			$rc = issueLip($driver, $target) if (!$rc && $lip);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($clearLuns) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			$rc = clearLuns($driver, $target, $group);
			$rc = issueLip($driver, $target) if (!$rc && $lip);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($enableTarget) && do {
			print "\n-> Making requested changes.\n";
			$rc = enableTarget($driver, $enableTarget);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($disableTarget) && do {
			last if (prompt());
			print "\n-> Making requested changes.\n";
			$rc = disableTarget($driver, $disableTarget);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($issueLip) && do {
			print "\n-> Making requested changes.\n";
			$rc = issueLip($driver, $issueLip, TRUE) if (!$noLip);
			print "\t-> Done.\n";
			last SWITCH;
		};
		defined($dumpAttrs) && do {
			print "SCST attributes:\n";
			print Dumper($SCST->scstAttributes());
			foreach my $handler (sort keys %{$CURRENT{'handler'}}) {
				my $devices = $CURRENT{'handler'}->{$handler};
				foreach my $device (sort @{$devices}) {
					print "Device $device attributes:\n";
					print Dumper($SCST->deviceAttributes($device));
				}
			}
			last SWITCH;
		};

		if (!$all_good) {
			print "No valid operations specified.\n";
			exit 1;
		}
	}

	issueWarning($SCST->errorString($rc)) if ($rc);

	print "\nAll done.\n";

	exit $rc;
}

sub readWorkingConfig {
	my $force = shift;
	my $errorString;

	print "\nCollecting current configuration: ";

	%CURRENT = ();

	# Get current handlers/devices

	my $handlers;
	($handlers, $errorString) = $SCST->handlers();
	immediateExit($errorString);

	foreach my $handler (@{$handlers}) {
		my $devices;

		($devices, $errorString) = $SCST->devicesByHandler($handler);
		immediateExit($errorString);
		$CURRENT{'handler'}->{$handler} = $devices;
	}

	# Get current assignments

	my $drivers;
	($drivers, $errorString) = $SCST->drivers();
	immediateExit($errorString);

	foreach my $driver (@{$drivers}) {
		my %empty;
		$CURRENT{'assign'}->{$driver} = \%empty;
		my $targets;
		($targets, $errorString) = $SCST->targets($driver);
		immediateExit($errorString);
		foreach my $target (@{$targets}) {
			my %empty;
			$CURRENT{'assign'}->{$driver}->{$target} = \%empty;

			my $luns;
			($luns, $errorString) = $SCST->luns($driver, $target);

			$CURRENT{'assign'}->{$driver}->{$target}->{'LUN'} = $luns if (defined($luns));

			my $groups;
			($groups, $errorString) = $SCST->groups($driver, $target);
			immediateExit($errorString);
			foreach my $group (@{$groups}) {
				my $initiators;
				($initiators, $errorString) = $SCST->initiators($driver, $target, $group);
				immediateExit($errorString);
				$CURRENT{'assign'}->{$driver}->{$target}->{'GROUP'}->{$group}->{'INITIATORS'} = $initiators;
				($luns, $errorString) = $SCST->luns($driver, $target, $group);
				$CURRENT{'assign'}->{$driver}->{$target}->{'GROUP'}->{$group}->{'LUN'} = $luns;
				immediateExit($errorString);
			}
		}
	}

	my $dgroups;
	($dgroups, $errorString) = $SCST->deviceGroups();
	immediateExit($errorString);

	foreach my $dgroup (@{$dgroups}) {
		my $dgd;
		($dgd, $errorString) = $SCST->deviceGroupDevices($dgroup);
		immediateExit($errorString);
		$CURRENT{'dgroups'}->{$dgroup}->{'devices'} = $dgd;
		my $tgroups;
		($tgroups, $errorString) = $SCST->targetGroups($dgroup);
		immediateExit($errorString);
		foreach my $tgroup (@{$tgroups}) {
			my $tgt;
			($tgt, $errorString) = $SCST->targetGroupTargets($dgroup, $tgroup);
			$CURRENT{'dgroups'}->{$dgroup}->{'tgroups'}->{$tgroup}->{'targets'} = $tgt;
		}
	}

	print "done.\n\n";

	# Perform some basic checks

	# Check for initiators belonging to more than one group
	foreach my $driver (keys %{$CURRENT{'assign'}}) {
		foreach my $target (keys %{$CURRENT{'assign'}->{$driver}}) {
			my $current = $CURRENT{'assign'}->{$driver}->{$target}->{'GROUP'};
			my %seen_init;

			foreach my $group (keys %{$current}) {
				my $initiators = $$current{$group}->{'INITIATORS'};

				foreach my $init (@{$initiators}) {
					if (defined($seen_init{$init})) {
						if (!$force) {
							print "\t-> FATAL: Initiator '$init' belongs to more than one groups ".
							  "for driver/target '$driver/target', aborting. Use -force to override.\n";
							return TRUE;
						}
					}

					$seen_init{$init}++;
				}
			}
		}
	}

	return FALSE;
}

# Older Perl versions complain if the argument of length() is undefined. Hence
# this function that checks whether its arguments are defined and not empty.
sub valid {
	return $SCST->valid(@_);
}

# Escape metacharacters (space, backslash and hash sign).
sub escapeMeta {
	my $value = shift;

	$value =~ s/([\\\#])/\\$1/g;
	if ($value =~ / /) {
		$value = "\"$value\"";
	}
	return $value;
}

# Serialize key attributes.
# $prefix: output prefix, e.g. "\t\t".
# $attributes: reference to a hash with attributes and their values.
# $attr_filter: if specified, reference to a hash with the names of which
#   (static) attributes to serialize.
sub serializeKeyAttr {
    my $prefix = shift;
    my $attributes = shift;
    my $attr_filter = shift;
    my $result = "";

    foreach my $attribute (sort keys %{$attributes}) {
	next if defined($$attributes{$attribute}->{'set'});
	next if ($$attributes{$attribute}->{'static'} &&
		 !(defined($attr_filter)
		   && defined($$attr_filter{$attribute})));

	if (defined($$attributes{$attribute}->{'keys'})) {
	    my @values;
	    foreach my $key (keys %{$$attributes{$attribute}->{'keys'}}) {
		my $value =
		    $$attributes{$attribute}->{'keys'}->{$key}->{'value'};
		# $value = undef means that the attribute is write-only.
		push (@values, $value) if (defined($value));
	    }
	    foreach my $value (sort @values) {
		$result .= "$prefix$attribute " . escapeMeta($value) . "\n";
	    }
	} elsif ($attribute eq 'enabled' || $attribute eq 'hw_target' || $attribute eq 'size' || $attribute eq 'size_mb') {
	    my $value = $$attributes{$attribute}->{'value'};
	    $result .= "$prefix$attribute $value\n";
	}
    }

    return $result;
}

# Serialize non-key attributes.
# $prefix: output prefix, e.g. "\t\t".
# $attributes: reference to a hash with attributes and their values.
# $attr_filter: if specified, reference to a hash with the names of which
#   (static) attributes to serialize.
sub serializeNkAttr {
    my $prefix = shift;
    my $attributes = shift;
    my $attr_filter = shift;
    my $result = "";

    foreach my $attribute (sort keys %{$attributes}) {
	if (!defined($$attributes{$attribute}->{'set'})
	    && (!$$attributes{$attribute}->{'static'}
		|| defined($attr_filter)
		   && defined($$attr_filter{$attribute}))
	    && !defined($$attributes{$attribute}->{'keys'})
	    && $attribute ne 'dif_checks_failed'
	    && $attribute ne 'enabled'
	    && $attribute ne 'hw_target') {
	    my $value = $$attributes{$attribute}->{'value'};
	    # $value = undef means that the attribute is write-only.
	    if (defined($value)) {
		$result .= "$prefix$attribute " . escapeMeta($value) . "\n";
	    }
	}
    }

    return $result;
}

# Return TRUE if and only if $1 is an SCST pass-through device.
sub isPassthroughDev {
	my $dev = shift;
	my $pt = FALSE;
	my $errorString;

	foreach my $handler (keys %{$CURRENT{'handler'}}) {
		my $ha;
		($ha, $errorString) = $SCST->handlerAttributes($handler);
		next if (defined($ha->{'mgmt'}) &&
			 $ha->{'mgmt'} !~ 'echo "add_device H:C:I:L"');
		my @devs = @{$CURRENT{'handler'}->{$handler}};
		for my $i (0 .. $#devs) {
			if ($dev eq $devs[$i]) {
				$pt = TRUE;
				last;
			}
		}
		last if $pt;
	}
}

#***********************************************************************************************
# Returns 0 upon success and 1 upon error.
sub writePeerConfiguration {
	my $nonkey = shift;
	my $errorString;

	my $io = new IO::File $CONFIGFILE, O_CREAT|O_WRONLY|O_TRUNC;

	if (!$io) {
		print "Failed to save configuration to file '$CONFIGFILE': $!\n";
		return 1;
	}

	print "Writing current configuration to file '$CONFIGFILE'.. ";


        # Prune devices (and targets) out of iscsi
        $CURRENT{assign}->{iscsi} = {};

        # Accumulate all remaining devices in use
        my %ALL_DEVICES=();
        while (my ($assign, $targets) = each %{$CURRENT{assign}}) {
            next if $assign eq "iscsi";
            for my $target (keys %$targets) {
                my $groups = $targets->{$target}->{GROUP};
                for my $group (values %$groups) {
                    my $luns = $group->{LUN};
                    for my $lun (values %$luns) {
                        my $device = $lun;
                        ++$ALL_DEVICES{$device}
                    }
                }
            }
        }

        # Prune all devices not in use
        for my $handler (keys %{$CURRENT{handler}}) {
            $CURRENT{handler}->{$handler} = [grep exists $ALL_DEVICES{$_}, @{$CURRENT{handler}->{$handler}}]
        }

        for my $dgroup (keys %{$CURRENT{dgroups}}) {            
            $CURRENT{dgroups}->{$dgroup}->{devices} = [grep exists $ALL_DEVICES{$_}, @{$CURRENT{dgroups}->{$dgroup}->{devices}}]
        }

	print $io "# Automatically generated by $Version.\n\n";

	{
		my $attributes;
		($attributes, $errorString) = $SCST->scstAttributes();
		immediateExit($errorString);

		print $io serializeKeyAttr("", $attributes);
		if ($nonkey) {
		    my $nk = serializeNkAttr("", $attributes);
		    if ($nk) {
			print $io "# Non-key attributes\n";
			print $io $nk;
		    }
		}
		print $io "\n";
	}

	foreach my $handler (sort keys %{$CURRENT{'handler'}}) {
		my $handler_buff = "";
		my $handler_buff_nk = "";
		my $handler_attrs;
		my $attributes;

		($handler_attrs, $errorString) = $SCST->deviceCreateAttributes($handler);
		($attributes, $errorString) = $SCST->handlerAttributes($handler);
		$handler_buff = serializeKeyAttr("\t", $attributes);
		$handler_buff_nk = serializeNkAttr("\t", $attributes) if ($nonkey);

		my $devices = $CURRENT{'handler'}->{$handler};

		my $device_buff = "";
		foreach my $device (sort @{$devices}) {

			my $attributes;
			my $attribute_buff = "";
			my $attribute_buff_nk = "";

			($attributes, $errorString) = $SCST->deviceAttributes($device);

                        if ($handler eq 'vdisk_fileio') {
				if ($device eq 'disk00') {
					$attributes->{naa_id}->{keys}->{0}->{value} = "0x638a95f000000${CLUSTERID}00000$PEERBBSID";
				} else {
					next;     ###For now skip fileio devices, they break the remote config
				}
                        }
                        $device_buff .= "\tDEVICE $device";
                        if ($handler eq 'vdisk_blockio') {
				$attributes->{active}->{keys}->{0}->{value} = "0";
			}

			$attribute_buff = serializeKeyAttr("\t\t", $attributes, $handler_attrs);
			$attribute_buff_nk = serializeNkAttr("\t\t", $attributes, $handler_attrs) if ($nonkey);
			$attribute_buff .= "\n" if ($attribute_buff);
			$attribute_buff_nk .= "\n" if ($attribute_buff_nk);

			if ($attribute_buff_nk) {
				$attribute_buff .= "\t\t# Non-key attributes\n";
				$attribute_buff .= $attribute_buff_nk;
			}

			$attribute_buff =~ s/\n+$/\n/;

			if ($attribute_buff) {
				$device_buff .= " {\n";
				$device_buff .= $attribute_buff;
				$device_buff .= "\t}\n\n";
			} else {
				$device_buff .= "\n";
			}
		}

		$device_buff =~ s/\n+$/\n/;

		$handler_buff .= $device_buff;

		if ($handler_buff_nk) {
			$handler_buff .= "\t# Non-key attributes\n";
			$handler_buff .= $handler_buff_nk;
		}

		if ($handler_buff) {
			print $io "HANDLER $handler {\n";
			print $io $handler_buff;
			print $io "}\n\n";
		}
	}
	foreach my $driver (sort keys %{$CURRENT{'assign'}}) {
		my $driver_buff = "";

		my $drv_attrs;
		my $drv_attr_buff = "";
		my $drv_attr_buff_nk = "";

		($drv_attrs, $errorString) = $SCST->driverAttributes($driver);
		$drv_attr_buff = serializeKeyAttr("\t", $drv_attrs);
		$drv_attr_buff_nk = serializeNkAttr("\t", $drv_attrs) if ($nonkey);
		$drv_attr_buff .= "\n" if ($drv_attr_buff);
		$drv_attr_buff_nk .= "\n" if ($drv_attr_buff_nk);

		my $targets = $CURRENT{'assign'}->{$driver};
		my $tgt_attrs;
		($tgt_attrs, $errorString) = $SCST->targetCreateAttributes($driver);

		my $target_buff = "";
		foreach my $target (sort keys %{$targets}) {
                        if ($target eq $MYWWPN1) {
                                $target_buff .= "\tTARGET $PEERWWPN1";
                        } elsif ($target eq $MYWWPN2) {
                                $target_buff .= "\tTARGET $PEERWWPN2";
                        } elsif ($target eq $MYWWPN3) {
                                $target_buff .= "\tTARGET $PEERWWPN3";
                        } elsif ($target eq $MYWWPN4) {
                                $target_buff .= "\tTARGET $PEERWWPN4";
                        } else {
        			$target_buff .= "\tTARGET $target";
                        }

			my $attributes;
			my $attribute_buff = "";
			my $attribute_buff_nk = "";

			($attributes, $errorString) = $SCST->targetAttributes($driver, $target);
			if (defined($$attributes{'hw_target'}) &&
			  ($$attributes{'hw_target'}->{'value'} == TRUE)) {
				$attribute_buff = "\t\tHW_TARGET\n\n";
			}

			$attribute_buff .= serializeKeyAttr("\t\t", $attributes, $tgt_attrs);
			$attribute_buff_nk .= serializeNkAttr("\t\t", $attributes, $tgt_attrs) if ($nonkey);
			$attribute_buff .= "\n" if ($attribute_buff);
			$attribute_buff_nk .= "\n" if ($attribute_buff_nk);

			my $luns = $CURRENT{'assign'}->{$driver}->{$target}->{'LUN'};
			my $lun_attrs;
			($lun_attrs, $errorString) = $SCST->lunCreateAttributes($driver, $target);

			my $t_lun_buff = "";
			foreach my $lun (sort numerically keys %{$luns}) {
				my $lun_dev = $$luns{$lun};

				# Do not save copy_manager LUN definitions
				# for LUNs associated with an SCST device
				# handler.

				next if ($driver eq 'copy_manager' &&
					 isPassthroughDev($lun_dev));

				$t_lun_buff .= "\t\tLUN $lun $lun_dev";

				my $attributes;
				($attributes, $errorString) = $SCST->lunAttributes($driver, $target, $lun);
				my $l_attribute_buff =
				    serializeKeyAttr("\t\t\t",
						     $attributes,
						     $lun_attrs);
				my $l_attribute_buff_nk =
				    serializeNkAttr("\t\t\t",
						    $attributes,
						    $lun_attrs) if ($nonkey);

				if ($l_attribute_buff_nk) {
					$l_attribute_buff .= "\t\t\t# Non-key attributes\n";
					$l_attribute_buff .= $l_attribute_buff_nk;
				}

				if ($l_attribute_buff) {
					$t_lun_buff .= " {\n";
					$t_lun_buff .= $l_attribute_buff;
					$t_lun_buff .= "\t\t}\n\n";
				} else {
					$t_lun_buff .= "\n";
				}
			}

			$t_lun_buff .= "\n" if ($t_lun_buff);
			$t_lun_buff =~ s/\n+$/\n\n/;

			my $groups = $CURRENT{'assign'}->{$driver}->{$target}->{'GROUP'};

			my $group_buff = "";
			foreach my $group (sort keys %{$groups}) {
				my $lun_attrs;
				my $ini_attrs;

				($lun_attrs, $errorString) = $SCST->lunCreateAttributes($driver, $target, $group);
				($ini_attrs, $errorString) = $SCST->initiatorCreateAttributes($driver, $target, $group);
				$group_buff .= "\t\tGROUP $group";

				my $luns = $CURRENT{'assign'}->{$driver}->{$target}->{'GROUP'}->{$group}->{'LUN'};

				my $lun_buff = "";
				foreach my $lun (sort numerically keys %{$luns}) {
					my $lun_dev = $$luns{$lun};

					$lun_buff .= "\t\t\tLUN $lun $lun_dev";

					my $attributes;
					($attributes, $errorString) = $SCST->lunAttributes($driver, $target, $lun, $group);

					my $l_attribute_buff
					    = serializeKeyAttr("\t\t\t\t",
							       $attributes,
							       $lun_attrs);
					my $l_attribute_buff_nk
					    = serializeNkAttr("\t\t\t\t",
							      $attributes,
							      $lun_attrs)
					    if ($nonkey);

					if ($l_attribute_buff_nk) {
						$l_attribute_buff .= "\t\t\t\t# Non-key attributes\n";
						$l_attribute_buff .= $l_attribute_buff_nk;
					}

					if ($l_attribute_buff) {
						$lun_buff .= " {\n";
						$lun_buff .= $l_attribute_buff;
						$lun_buff .= "\t\t\t}\n";
					} else {
						$lun_buff .= "\n";
					}

				}

				my $inits = $CURRENT{'assign'}->{$driver}->{$target}->{'GROUP'}->{$group}->{'INITIATORS'};

				my $init_buff = "";
				foreach my $init (sort @{$inits}) {
					$init_buff .= "\n\t\t\tINITIATOR " . escapeMeta($init);

					my $attributes;
					($attributes, $errorString) = $SCST->initiatorAttributes($driver, $target, $group, $init);

					my $i_attribute_buff
					    = serializeKeyAttr("\t\t\t\t",
							       $attributes,
							       $ini_attrs);
					my $i_attribute_buff_nk
					    = serializeNkAttr("\t\t\t\t",
							      $attributes,
							      $ini_attrs)
					    if ($nonkey);

					if ($i_attribute_buff_nk) {
						$i_attribute_buff .= "\t\t\t\t# Non-key attributes\n";
						$i_attribute_buff .= $i_attribute_buff_nk;
					}

					if ($i_attribute_buff) {
						$init_buff .= " {\n";
						$init_buff .= $i_attribute_buff;
						$init_buff .= "\t\t\t}\n";
					} else {
						$init_buff .= "\n";
					}
				}

				my $grp_attributes;
				($grp_attributes, $errorString) = $SCST->groupAttributes($driver, $target, $group);
				my $g_attribute_buff
				    = serializeKeyAttr("\t\t\t",
						       $grp_attributes);
				my $g_attribute_buff_nk
				    = serializeNkAttr("\t\t\t",
						      $grp_attributes)
				    if ($nonkey);

				if ($lun_buff || $init_buff ||
				    $g_attribute_buff || $g_attribute_buff_nk) {
					$group_buff .= " {\n";
					$group_buff .= $lun_buff;
					$group_buff .= $init_buff;
				}

				if ($g_attribute_buff_nk) {
					$g_attribute_buff .= "\n" if ($g_attribute_buff);
					$g_attribute_buff .= "\t\t\t# Non-key attributes\n";
					$g_attribute_buff .= $g_attribute_buff_nk;
				}

				if ($g_attribute_buff) {
					$group_buff .= "\n";
					$group_buff .= $g_attribute_buff;
				}

				if ($group_buff && ($lun_buff || $init_buff ||
						    $g_attribute_buff || $g_attribute_buff_nk)) {
					$group_buff .= "\t\t}\n\n";
					$group_buff =~ s/\n+$/\n/;
				}

				$group_buff .= "\n" if ($group_buff);
			}

			if ($attribute_buff_nk) {
				$attribute_buff .= "\t\t# Non-key attributes\n";
				$attribute_buff .= $attribute_buff_nk;
			}

			if ($attribute_buff || $t_lun_buff || $group_buff ) {
				$target_buff .= " {\n";

				$target_buff .= $attribute_buff;
				$target_buff .= $t_lun_buff;
				$target_buff .= $group_buff;

				$target_buff =~ s/\n\n$/\n/;
				$target_buff .= "\t}\n\n";
			} else {
				$target_buff .= "\n";
			}
		}

		if ($drv_attr_buff_nk) {
			$drv_attr_buff .= "\t# Non-key attributes\n";
			$drv_attr_buff .= $drv_attr_buff_nk;
		}

		$driver_buff .= $drv_attr_buff;
		$driver_buff .= $target_buff;
		$driver_buff =~ s/\n\n$/\n/;

		if ($driver_buff) {
			print $io "TARGET_DRIVER $driver {\n";
                        if($driver eq 'iscsi') {
                                print $io "\tenabled 1\n";
                        } elsif ($driver eq 'copy_manager') {
                                print $io "\tTARGET copy_manager_tgt\n";
                        } else {
			print $io $driver_buff;
                        }
			print $io "}\n\n";
		}
	}

	my $dga;
	($dga, $errorString) = $SCST->aluaAttributes();
	my $dga_buff = serializeKeyAttr("\t", $dga);
	my $dga_buff_nk = serializeNkAttr("\t", $dga) if ($nonkey);
	if ($dga_buff_nk) {
		$dga_buff .= "\t# Non-key attributes\n";
		$dga_buff .= $dga_buff_nk;
	}
	if ($dga_buff) {
		print $io "ALUA {\n";
		print $io $dga_buff;
		print $io "}\n\n";
	}

	foreach my $dgroup (sort keys %{$CURRENT{'dgroups'}}) {
		my $dgroup_buff = "";
		my $dgroup_attrs;
		my $dgrp_attr_buff = "";
		my $dgrp_attr_buff_nk = "";

		($dgroup_attrs, $errorString) = $SCST->deviceGroupAttributes($dgroup);
		$dgrp_attr_buff = serializeKeyAttr("\t", $dgroup_attrs);
		$dgrp_attr_buff_nk = serializeNkAttr("\t", $dgroup_attrs) if ($nonkey);
		$dgrp_attr_buff .= "\n" if ($dgrp_attr_buff);
		$dgrp_attr_buff_nk .= "\n" if ($dgrp_attr_buff_nk);

		my $devices_buff = "";

		my $devices = $CURRENT{'dgroups'}->{$dgroup}->{'devices'};

		foreach my $device (sort @{$devices}) {
			$devices_buff .= "\tDEVICE $device\n";
		}

		$devices_buff .= "\n" if ($devices_buff);

		my $tgroups = $CURRENT{'dgroups'}->{$dgroup}->{'tgroups'};

		my $tgroup_buff = "";

		foreach my $tgroup (sort keys %{$tgroups}) {
			$tgroup_buff .= "\tTARGET_GROUP $tgroup";

			my $attributes;
			my $attribute_buff = "";
			my $attribute_buff_nk = "";

			($attributes, $errorString) = $SCST->targetGroupAttributes($dgroup, $tgroup);
			$attribute_buff .= serializeKeyAttr("\t\t", $attributes);
			$attribute_buff_nk .= serializeNkAttr("\t\t", $attributes) if ($nonkey);
			$attribute_buff .= "\n" if ($attribute_buff);
			$attribute_buff_nk .= "\n" if ($attribute_buff_nk);

			my $tgts = $CURRENT{'dgroups'}->{$dgroup}->{'tgroups'}->{$tgroup}->{'targets'};

			my $tgt_buff = "";
                        if ($tgroup eq $PEERNAME) {
                                $tgt_buff .= "\t\tTARGET $PEERWWPN1\n";
                                $tgt_buff .= "\t\tTARGET $PEERWWPN2\n";
                                $tgt_buff .= "\t\tTARGET $PEERWWPN3\n";
                                $tgt_buff .= "\t\tTARGET $PEERWWPN4\n";			
			}

			if ($attribute_buff_nk) {
				$attribute_buff .= "\t\t# Non-key attributes\n";
				$attribute_buff .= $attribute_buff_nk;
			}

			if ($attribute_buff || $tgt_buff) {
				$tgroup_buff .= " {\n";

				$tgroup_buff .= $attribute_buff;
				$tgroup_buff .= $tgt_buff;

				$tgroup_buff =~ s/\n\n$/\n/;
				$tgroup_buff .= "\t}\n\n";
			} else {
				$tgroup_buff .= "\n";
			}
		}

		if ($dgrp_attr_buff_nk) {
			$dgrp_attr_buff .= "\t# Non-key attributes\n";
			$dgrp_attr_buff .= $dgrp_attr_buff_nk;
		}

		$dgroup_buff .= $dgrp_attr_buff;
		$dgroup_buff .= $devices_buff;
		$dgroup_buff .= $tgroup_buff;
		$dgroup_buff =~ s/\n\n$/\n/;
		if ($dgroup_buff) {
			print $io "DEVICE_GROUP $dgroup {\n";
			print $io $dgroup_buff;
			print $io "}\n\n";
		}
	}

	$io->flush;
	$io->sync;
	close $io;

	return 0;
}

#***********************************************************************************************
# Returns 0 upon success and 1 upon error.
sub peerQuickConfiguration {
        my $nonkey = shift;
	my $errorString;

        my $io = new IO::File $CONFIGFILE, O_CREAT|O_WRONLY|O_TRUNC;

        if (!$io) {
                print "Failed to save configuration to file '$CONFIGFILE': $!\n";
                return 1;
        }

        print "Writing current configuration to file '$CONFIGFILE'.. ";

        print $io "# Automatically generated by $Version.\n\n";

        {
                my ($attributes, $errorString) = $SCST->scstAttributes();
                immediateExit($errorString);

                print $io serializeKeyAttr("", $attributes);
                if ($nonkey) {
                    my $nk = serializeNkAttr("", $attributes);
                    if ($nk) {
                        print $io "# Non-key attributes\n";
                        print $io $nk;
                    }
                }
                print $io "\n";
        }

        foreach my $handler (sort keys %{$CURRENT{'handler'}}) {
		my $handler_buff = "";
		my $handler_buff_nk = "";
		my $handler_attrs;
		my $attributes;

                ($handler_attrs, $errorString) = $SCST->deviceCreateAttributes($handler);
                ($attributes, $errorString) = $SCST->handlerAttributes($handler);

                $handler_buff = serializeKeyAttr("\t", $attributes);
                $handler_buff_nk = serializeNkAttr("\t", $attributes) if ($nonkey);

                my $devices = $CURRENT{'handler'}->{$handler};

                my $device_buff;
                foreach my $device (sort @{$devices}) {

                        my ($attributes, $errorString) = $SCST->deviceAttributes($device);

                        if ($handler eq 'vdisk_fileio') {
                                if ($device eq 'disk00') {
                                        $attributes->{naa_id}->{keys}->{0}->{value} = "0x638a95f000000${CLUSTERID}00000$PEERBBSID";
                                } else {
                                        next;     ###For now skip fileio devices, they break the remote config
                                }
                        }
                        $device_buff .= "\tDEVICE $device";

                        my $attribute_buff;
                        my $attribute_buff_nk;


                        $attribute_buff = serializeKeyAttr("\t\t", $attributes, $handler_attrs);
                        $attribute_buff_nk = serializeNkAttr("\t\t", $attributes, $handler_attrs) if ($nonkey);
                        $attribute_buff .= "\n" if ($attribute_buff);
                        $attribute_buff_nk .= "\n" if ($attribute_buff_nk);

                        if ($attribute_buff_nk) {
                                $attribute_buff .= "\t\t# Non-key attributes\n";
                                $attribute_buff .= $attribute_buff_nk;
                        }

                        $attribute_buff =~ s/\n+$/\n/;

                        if ($attribute_buff) {
                                $device_buff .= " {\n";
                                $device_buff .= $attribute_buff;
                                $device_buff .= "\t}\n\n";
                        } else {
                                $device_buff .= "\n";
                        }
                }

                $device_buff =~ s/\n+$/\n/;

                $handler_buff .= $device_buff;

                if ($handler_buff_nk) {
                        $handler_buff .= "\t# Non-key attributes\n";
                        $handler_buff .= $handler_buff_nk;
                }

                if ($handler_buff) {
                        print $io "HANDLER $handler {\n";
                        print $io $handler_buff;
                        print $io "}\n\n";
                }
        }
        foreach my $driver (sort keys %{$CURRENT{'assign'}}) {
                my $driver_buff;

		my $drv_attrs;
		my $drv_attr_buff = "";
		my $drv_attr_buff_nk = "";

                ($drv_attrs, $errorString) = $SCST->driverAttributes($driver);
                $drv_attr_buff = serializeKeyAttr("\t", $drv_attrs);
                $drv_attr_buff_nk = serializeNkAttr("\t", $drv_attrs) if ($nonkey);
                $drv_attr_buff .= "\n" if ($drv_attr_buff);
                $drv_attr_buff_nk .= "\n" if ($drv_attr_buff_nk);

                my $targets = $CURRENT{'assign'}->{$driver};
                my ($tgt_attrs, $errorString) = $SCST->targetCreateAttributes($driver);

                my $target_buff;

                foreach my $target (sort keys %{$targets}) {
                        if ($target eq $MYWWPN1) {
                                $target_buff .= "\tTARGET $PEERWWPN1";
                        } elsif ($target eq $MYWWPN2) {
                                $target_buff .= "\tTARGET $PEERWWPN2";
                        } elsif ($target eq $MYWWPN3) {
                                $target_buff .= "\tTARGET $PEERWWPN3";
                        } elsif ($target eq $MYWWPN4) {
                                $target_buff .= "\tTARGET $PEERWWPN4";
                        } else {
                                $target_buff .= "\tTARGET $target";
                        }

			my $attributes;
			my $attribute_buff = "";
			my $attribute_buff_nk = "";

                        ($attributes, $errorString) = $SCST->targetAttributes($driver, $target);
                        if (defined($$attributes{'hw_target'}) &&
                          ($$attributes{'hw_target'}->{'value'} == TRUE)) {
                                $attribute_buff = "\t\tHW_TARGET\n\n";
                        }

                        $attribute_buff .= serializeKeyAttr("\t\t", $attributes, $tgt_attrs);
                        $attribute_buff_nk .= serializeNkAttr("\t\t", $attributes, $tgt_attrs) if ($nonkey);
                        $attribute_buff .= "\n" if ($attribute_buff);
                        $attribute_buff_nk .= "\n" if ($attribute_buff_nk);

                        my $luns = $CURRENT{'assign'}->{$driver}->{$target}->{'LUN'};
                        my ($lun_attrs, $errorString) = $SCST->lunCreateAttributes($driver, $target);

                        my $t_lun_buff;
                        foreach my $lun (sort numerically keys %{$luns}) {
                                my $lun_dev = $$luns{$lun};

                                # Do not save copy_manager LUN definitions
                                # for LUNs associated with an SCST device
                                # handler.

                                next if ($driver eq 'copy_manager' &&
                                         isPassthroughDev($lun_dev));

                                $t_lun_buff .= "\t\tLUN $lun $lun_dev";

                                my ($attributes, $errorString) = $SCST->lunAttributes($driver, $target, $lun);
                                my $l_attribute_buff =
                                    serializeKeyAttr("\t\t\t",
                                                     $attributes,
                                                     $lun_attrs);
                                my $l_attribute_buff_nk =
                                    serializeNkAttr("\t\t\t",
                                                    $attributes,
                                                    $lun_attrs) if ($nonkey);

                                if ($l_attribute_buff_nk) {
                                        $l_attribute_buff .= "\t\t\t# Non-key attributes\n";
                                        $l_attribute_buff .= $l_attribute_buff_nk;
                                }


                                if ($l_attribute_buff) {
                                        $t_lun_buff .= " {\n";
                                        $t_lun_buff .= $l_attribute_buff;
                                        $t_lun_buff .= "\t\t}\n\n";
                                } else {
                                        $t_lun_buff .= "\n";
                                }
                        }

                        $t_lun_buff .= "\n" if ($t_lun_buff);
                        $t_lun_buff =~ s/\n+$/\n\n/;

                        my $groups = $CURRENT{'assign'}->{$driver}->{$target}->{'GROUP'};

                        my $group_buff;
                        foreach my $group (sort keys %{$groups}) {
				my $lun_attrs;
				my $ini_attrs;

                                ($lun_attrs, $errorString) = $SCST->lunCreateAttributes($driver, $target, $group);
                                ($ini_attrs, $errorString) = $SCST->initiatorCreateAttributes($driver, $target, $group);

                                $group_buff .= "\t\tGROUP $group";

                                my $luns = $CURRENT{'assign'}->{$driver}->{$target}->{'GROUP'}->{$group}->{'LUN'};

                                my $lun_buff;
                                foreach my $lun (sort numerically keys %{$luns}) {
                                        my $lun_dev = $$luns{$lun};

                                        $lun_buff .= "\t\t\tLUN $lun $lun_dev";

                                        my ($attributes, $errorString) = $SCST->lunAttributes($driver, $target, $lun, $group);

                                        my $l_attribute_buff
                                            = serializeKeyAttr("\t\t\t\t",
                                                               $attributes,
                                                               $lun_attrs);
                                        my $l_attribute_buff_nk
                                            = serializeNkAttr("\t\t\t\t",
                                                              $attributes,
                                                              $lun_attrs)
                                            if ($nonkey);

                                        if ($l_attribute_buff_nk) {
                                                $l_attribute_buff .= "\t\t\t\t# Non-key attributes\n";
                                                $l_attribute_buff .= $l_attribute_buff_nk;
                                        }

                                        if ($l_attribute_buff) {
                                                $lun_buff .= " {\n";
                                                $lun_buff .= $l_attribute_buff;
                                                $lun_buff .= "\t\t\t}\n";
                                        } else {
                                                $lun_buff .= "\n";
                                        }

                                }

                                my $inits = $CURRENT{'assign'}->{$driver}->{$target}->{'GROUP'}->{$group}->{'INITIATORS'};

                                my $init_buff;
                                foreach my $init (sort @{$inits}) {
                                        $init_buff .= "\n\t\t\tINITIATOR " . escapeMeta($init);

                                        my ($attributes, $errorString) = $SCST->initiatorAttributes($driver, $target, $group, $init);

                                        my $i_attribute_buff
                                            = serializeKeyAttr("\t\t\t\t",
                                                               $attributes,
                                                               $ini_attrs);
                                        my $i_attribute_buff_nk
                                            = serializeNkAttr("\t\t\t\t",
                                                              $attributes,
                                                              $ini_attrs)
                                            if ($nonkey);

                                        if ($i_attribute_buff_nk) {
                                                $i_attribute_buff .= "\t\t\t\t# Non-key attributes\n";
                                                $i_attribute_buff .= $i_attribute_buff_nk;
                                        }

                                        if ($i_attribute_buff) {
                                                $init_buff .= " {\n";
                                                $init_buff .= $i_attribute_buff;
                                                $init_buff .= "\t\t\t}\n";
                                        } else {
                                                $init_buff .= "\n";
                                        }
                                }

				my $grp_attributes;
                                ($grp_attributes, $errorString) = $SCST->groupAttributes($driver, $target, $group);
                                my $g_attribute_buff
                                    = serializeKeyAttr("\t\t\t",
                                                       $grp_attributes);
                                my $g_attribute_buff_nk
                                    = serializeNkAttr("\t\t\t",
                                                      $grp_attributes)
                                    if ($nonkey);

                                if ($lun_buff || $init_buff ||
                                    $g_attribute_buff || $g_attribute_buff_nk) {
                                        $group_buff .= " {\n";
                                        $group_buff .= $lun_buff;
                                        $group_buff .= $init_buff;
                                }

                                if ($g_attribute_buff_nk) {
                                        $g_attribute_buff .= "\n" if ($g_attribute_buff);
                                        $g_attribute_buff .= "\t\t\t# Non-key attributes\n";
                                        $g_attribute_buff .= $g_attribute_buff_nk;
                                }

                                if ($g_attribute_buff) {
                                        $group_buff .= "\n";
                                        $group_buff .= $g_attribute_buff;
                                }

                                if ($group_buff && ($lun_buff || $init_buff ||
                                                    $g_attribute_buff || $g_attribute_buff_nk)) {
                                        $group_buff .= "\t\t}\n\n";
                                        $group_buff =~ s/\n+$/\n/;
                                }

                                $group_buff .= "\n" if ($group_buff);
                        }

                        if ($attribute_buff_nk) {
                                $attribute_buff .= "\t\t# Non-key attributes\n";
                                $attribute_buff .= $attribute_buff_nk;
                        }

                        if ($attribute_buff || $t_lun_buff || $group_buff ) {
                                $target_buff .= " {\n";

                                $target_buff .= $attribute_buff;
                                $target_buff .= $t_lun_buff;
                                $target_buff .= $group_buff;

                                $target_buff =~ s/\n\n$/\n/;
                                $target_buff .= "\t}\n\n";
                        } else {
                                $target_buff .= "\n";
                        }
                }

                if ($drv_attr_buff_nk) {
                        $drv_attr_buff .= "\t# Non-key attributes\n";
                        $drv_attr_buff .= $drv_attr_buff_nk;
                }

                $driver_buff .= $drv_attr_buff;
                $driver_buff .= $target_buff;
                $driver_buff =~ s/\n\n$/\n/;

                if ($driver_buff) {
                        print $io "TARGET_DRIVER $driver {\n";
                        if($driver eq 'copy_manager') {
                                print $io "\tTARGET copy_manager_tgt\n";;
                        } else {
                                print $io $driver_buff;
                        }
                        print $io "}\n\n";
                }
        }

	my $dga;
        ($dga, $errorString) = $SCST->aluaAttributes();
        my $dga_buff = serializeKeyAttr("\t", $dga);
        my $dga_buff_nk = serializeNkAttr("\t", $dga) if ($nonkey);
        if ($dga_buff_nk) {
                $dga_buff .= "\t# Non-key attributes\n";
                $dga_buff .= $dga_buff_nk;
        }
        if ($dga_buff) {
                print $io "ALUA {\n";
                print $io $dga_buff;
                print $io "}\n\n";
        }

        foreach my $dgroup (sort keys %{$CURRENT{'dgroups'}}) {
                my $dgroup_buff;

                my ($dgroup_attrs, $errorString) = $SCST->deviceGroupAttributes($dgroup);

                my $dgrp_attr_buff;
                my $dgrp_attr_buff_nk;

                $dgrp_attr_buff = serializeKeyAttr("\t", $dgroup_attrs);
                $dgrp_attr_buff_nk = serializeNkAttr("\t", $dgroup_attrs) if ($nonkey);
                $dgrp_attr_buff .= "\n" if ($dgrp_attr_buff);
                $dgrp_attr_buff_nk .= "\n" if ($dgrp_attr_buff_nk);

                my $devices_buff;

                my $devices = $CURRENT{'dgroups'}->{$dgroup}->{'devices'};

                foreach my $device (sort @{$devices}) {
                        $devices_buff .= "\tDEVICE $device\n";
                }

                $devices_buff .= "\n" if ($devices_buff);

                my $tgroups = $CURRENT{'dgroups'}->{$dgroup}->{'tgroups'};

                my $tgroup_buff;

                foreach my $tgroup (sort keys %{$tgroups}) {
                        $tgroup_buff .= "\tTARGET_GROUP $tgroup";

                        my ($attributes, $errorString) = $SCST->targetGroupAttributes($dgroup, $tgroup);

                        my $attribute_buff;
                        my $attribute_buff_nk;

                        if ($tgroup eq $PEERNAME) {
                                $attributes->{state}->{keys}->{0}->{value} = "active";
                        }
                        if ($tgroup eq $MYNAME)
                        {
                                $attributes->{state}->{keys}->{0}->{value} = "standby";
                        }

                        $attribute_buff .= serializeKeyAttr("\t\t", $attributes);
                        $attribute_buff_nk .= serializeNkAttr("\t\t", $attributes) if ($nonkey);
                        $attribute_buff .= "\n" if ($attribute_buff);
                        $attribute_buff_nk .= "\n" if ($attribute_buff_nk);

                        my $tgts = $CURRENT{'dgroups'}->{$dgroup}->{'tgroups'}->{$tgroup}->{'targets'};

                        my $tgt_buff;
                        if ($tgroup eq $PEERNAME) {
                                $tgt_buff .= "\t\tTARGET $PEERWWPN1\n";
                                $tgt_buff .= "\t\tTARGET $PEERWWPN2\n";
                                $tgt_buff .= "\t\tTARGET $PEERWWPN3\n";
                                $tgt_buff .= "\t\tTARGET $PEERWWPN4\n";
                        }

                        if ($attribute_buff_nk) {
                                $attribute_buff .= "\t\t# Non-key attributes\n";
                                $attribute_buff .= $attribute_buff_nk;
                        }

                        if ($attribute_buff || $tgt_buff) {
                                $tgroup_buff .= " {\n";

                                $tgroup_buff .= $attribute_buff;
                                $tgroup_buff .= $tgt_buff;

                                $tgroup_buff =~ s/\n\n$/\n/;
                                $tgroup_buff .= "\t}\n\n";
                        } else {
                                $tgroup_buff .= "\n";
                        }
                }

                if ($dgrp_attr_buff_nk) {
                        $dgrp_attr_buff .= "\t# Non-key attributes\n";
                        $dgrp_attr_buff .= $dgrp_attr_buff_nk;
                }

                $dgroup_buff .= $dgrp_attr_buff;
                $dgroup_buff .= $devices_buff;
                $dgroup_buff .= $tgroup_buff;
                $dgroup_buff =~ s/\n\n$/\n/;
                if ($dgroup_buff) {
                        print $io "DEVICE_GROUP $dgroup {\n";
                        print $io $dgroup_buff;
                        print $io "}\n\n";
                }
        }

        $io->flush;
        $io->sync;
        close $io;

        return 0;
}

#***********************************************************************************************
# Returns 0 upon success and 1 upen error.
sub writeConfiguration {
	my $nonkey = shift;
	my $errorString;

	my $io = new IO::File $CONFIGFILE, O_CREAT|O_WRONLY|O_TRUNC;

	if (!$io) {
		print "Failed to save configuration to file '$CONFIGFILE': $!\n";
		return 1;
	}

	print "Writing current configuration to file '$CONFIGFILE'.. ";

	print $io "# Automatically generated by $Version.\n\n";

	{
		my $attributes;
		($attributes, $errorString) = $SCST->scstAttributes();
		immediateExit($errorString);

		print $io serializeKeyAttr("", $attributes);
		if ($nonkey) {
		    my $nk = serializeNkAttr("", $attributes);
		    if ($nk) {
			print $io "# Non-key attributes\n";
			print $io $nk;
		    }
		}
		print $io "\n";
	}

	foreach my $handler (sort keys %{$CURRENT{'handler'}}) {
		my $handler_buff = "";
		my $handler_buff_nk = "";
		my $handler_attrs;
		my $attributes;

		($handler_attrs, $errorString) = $SCST->deviceCreateAttributes($handler);
		($attributes, $errorString) = $SCST->handlerAttributes($handler);
		$handler_buff = serializeKeyAttr("\t", $attributes);
		$handler_buff_nk = serializeNkAttr("\t", $attributes) if ($nonkey);

		my $devices = $CURRENT{'handler'}->{$handler};

		my $device_buff = "";
		foreach my $device (sort @{$devices}) {
			$device_buff .= "\tDEVICE $device";

			my $attributes;
			my $attribute_buff = "";
			my $attribute_buff_nk = "";

			($attributes, $errorString) = $SCST->deviceAttributes($device);
			$attribute_buff = serializeKeyAttr("\t\t", $attributes, $handler_attrs);
			$attribute_buff_nk = serializeNkAttr("\t\t", $attributes, $handler_attrs) if ($nonkey);
			$attribute_buff .= "\n" if ($attribute_buff);
			$attribute_buff_nk .= "\n" if ($attribute_buff_nk);

			if ($attribute_buff_nk) {
				$attribute_buff .= "\t\t# Non-key attributes\n";
				$attribute_buff .= $attribute_buff_nk;
			}

			$attribute_buff =~ s/\n+$/\n/;

			if ($attribute_buff) {
#                       print $io "HANDLER $temphandler {\n";
				$device_buff .= " {\n";
				$device_buff .= $attribute_buff;
				$device_buff .= "\t}\n\n";
			} else {
				$device_buff .= "\n";
			}
		}

		$device_buff =~ s/\n+$/\n/;

		$handler_buff .= $device_buff;

		if ($handler_buff_nk) {
			$handler_buff .= "\t# Non-key attributes\n";
			$handler_buff .= $handler_buff_nk;
		}

		if ($handler_buff) {
			print $io "HANDLER $handler {\n";
			print $io $handler_buff;
			print $io "}\n\n";
		}
	}

	foreach my $driver (sort keys %{$CURRENT{'assign'}}) {
		my $driver_buff = "";

		my $drv_attrs;
		my $drv_attr_buff = "";
		my $drv_attr_buff_nk = "";

		($drv_attrs, $errorString) = $SCST->driverAttributes($driver);
		$drv_attr_buff = serializeKeyAttr("\t", $drv_attrs);
		$drv_attr_buff_nk = serializeNkAttr("\t", $drv_attrs) if ($nonkey);
		$drv_attr_buff .= "\n" if ($drv_attr_buff);
		$drv_attr_buff_nk .= "\n" if ($drv_attr_buff_nk);

		my $targets = $CURRENT{'assign'}->{$driver};
		my $tgt_attrs;
		($tgt_attrs, $errorString) = $SCST->targetCreateAttributes($driver);

		my $target_buff = "";
		foreach my $target (sort keys %{$targets}) {
			$target_buff .= "\tTARGET $target";

			my $attributes;
			my $attribute_buff = "";
			my $attribute_buff_nk = "";

			($attributes, $errorString) = $SCST->targetAttributes($driver, $target);
			if (defined($$attributes{'hw_target'}) &&
			  ($$attributes{'hw_target'}->{'value'} == TRUE)) {
				$attribute_buff = "\t\tHW_TARGET\n\n";
			}

			$attribute_buff .= serializeKeyAttr("\t\t", $attributes, $tgt_attrs);
			$attribute_buff_nk .= serializeNkAttr("\t\t", $attributes, $tgt_attrs) if ($nonkey);
			$attribute_buff .= "\n" if ($attribute_buff);
			$attribute_buff_nk .= "\n" if ($attribute_buff_nk);

			my $luns = $CURRENT{'assign'}->{$driver}->{$target}->{'LUN'};
			my $lun_attrs;
			($lun_attrs, $errorString) = $SCST->lunCreateAttributes($driver, $target);

			my $t_lun_buff = "";
			foreach my $lun (sort numerically keys %{$luns}) {
				my $lun_dev = $$luns{$lun};

				# Do not save copy_manager LUN definitions
				# for LUNs associated with an SCST device
				# handler.
				next if ($driver eq 'copy_manager' &&
					 isPassthroughDev($lun_dev));

				$t_lun_buff .= "\t\tLUN $lun $lun_dev";

				my $attributes;
				($attributes, $errorString) = $SCST->lunAttributes($driver, $target, $lun);
				my $l_attribute_buff =
				    serializeKeyAttr("\t\t\t",
						     $attributes,
						     $lun_attrs);
				my $l_attribute_buff_nk =
				    serializeNkAttr("\t\t\t",
						    $attributes,
						    $lun_attrs) if ($nonkey);

				if ($l_attribute_buff_nk) {
					$l_attribute_buff .= "\t\t\t# Non-key attributes\n";
					$l_attribute_buff .= $l_attribute_buff_nk;
				}

				if ($l_attribute_buff) {
					$t_lun_buff .= " {\n";
					$t_lun_buff .= $l_attribute_buff;
					$t_lun_buff .= "\t\t}\n\n";
				} else {
					$t_lun_buff .= "\n";
				}
			}

			$t_lun_buff .= "\n" if ($t_lun_buff);
			$t_lun_buff =~ s/\n+$/\n\n/;

			my $groups = $CURRENT{'assign'}->{$driver}->{$target}->{'GROUP'};

			my $group_buff = "";
			foreach my $group (sort keys %{$groups}) {
				my $lun_attrs;
				my $ini_attrs;

				($lun_attrs, $errorString) = $SCST->lunCreateAttributes($driver, $target, $group);
				($ini_attrs, $errorString) = $SCST->initiatorCreateAttributes($driver, $target, $group);
				$group_buff .= "\t\tGROUP $group";

				my $luns = $CURRENT{'assign'}->{$driver}->{$target}->{'GROUP'}->{$group}->{'LUN'};

				my $lun_buff = "";
				foreach my $lun (sort numerically keys %{$luns}) {
					my $lun_dev = $$luns{$lun};

					$lun_buff .= "\t\t\tLUN $lun $lun_dev";

					my $attributes;
					($attributes, $errorString) = $SCST->lunAttributes($driver, $target, $lun, $group);

					my $l_attribute_buff
					    = serializeKeyAttr("\t\t\t\t",
							       $attributes,
							       $lun_attrs);
					my $l_attribute_buff_nk
					    = serializeNkAttr("\t\t\t\t",
							      $attributes,
							      $lun_attrs)
					    if ($nonkey);

					if ($l_attribute_buff_nk) {
						$l_attribute_buff .= "\t\t\t\t# Non-key attributes\n";
						$l_attribute_buff .= $l_attribute_buff_nk;
					}

					if ($l_attribute_buff) {
						$lun_buff .= " {\n";
						$lun_buff .= $l_attribute_buff;
						$lun_buff .= "\t\t\t}\n";
					} else {
						$lun_buff .= "\n";
					}
				}

				my $inits = $CURRENT{'assign'}->{$driver}->{$target}->{'GROUP'}->{$group}->{'INITIATORS'};

				my $init_buff = "";
				foreach my $init (sort @{$inits}) {
					$init_buff .= "\n\t\t\tINITIATOR " . escapeMeta($init);

					my $attributes;
					($attributes, $errorString) = $SCST->initiatorAttributes($driver, $target, $group, $init);

					my $i_attribute_buff
					    = serializeKeyAttr("\t\t\t\t",
							       $attributes,
							       $ini_attrs);
					my $i_attribute_buff_nk
					    = serializeNkAttr("\t\t\t\t",
							      $attributes,
							      $ini_attrs)
					    if ($nonkey);

					if ($i_attribute_buff_nk) {
						$i_attribute_buff .= "\t\t\t\t# Non-key attributes\n";
						$i_attribute_buff .= $i_attribute_buff_nk;
					}

					if ($i_attribute_buff) {
						$init_buff .= " {\n";
						$init_buff .= $i_attribute_buff;
						$init_buff .= "\t\t\t}\n";
					} else {
						$init_buff .= "\n";
					}
				}

				my $grp_attributes;
				($grp_attributes, $errorString) = $SCST->groupAttributes($driver, $target, $group);
				my $g_attribute_buff
				    = serializeKeyAttr("\t\t\t",
						       $grp_attributes);
				my $g_attribute_buff_nk
				    = serializeNkAttr("\t\t\t",
						      $grp_attributes)
				    if ($nonkey);

				if ($lun_buff || $init_buff ||
				    $g_attribute_buff || $g_attribute_buff_nk) {
					$group_buff .= " {\n";
					$group_buff .= $lun_buff;
					$group_buff .= $init_buff;
				}

				if ($g_attribute_buff_nk) {
					$g_attribute_buff .= "\n" if ($g_attribute_buff);
					$g_attribute_buff .= "\t\t\t# Non-key attributes\n";
					$g_attribute_buff .= $g_attribute_buff_nk;
				}

				if ($g_attribute_buff) {
					$group_buff .= "\n";
					$group_buff .= $g_attribute_buff;
				}

				if ($group_buff && ($lun_buff || $init_buff ||
						    $g_attribute_buff || $g_attribute_buff_nk)) {
					$group_buff .= "\t\t}\n\n";
					$group_buff =~ s/\n+$/\n/;
				}

				$group_buff .= "\n" if ($group_buff);
			}

			if ($attribute_buff_nk) {
				$attribute_buff .= "\t\t# Non-key attributes\n";
				$attribute_buff .= $attribute_buff_nk;
			}

			if ($attribute_buff || $t_lun_buff || $group_buff ) {
				$target_buff .= " {\n";

				$target_buff .= $attribute_buff;
				$target_buff .= $t_lun_buff;
				$target_buff .= $group_buff;

				$target_buff =~ s/\n\n$/\n/;
				$target_buff .= "\t}\n\n";
			} else {
				$target_buff .= "\n";
			}
		}

		if ($drv_attr_buff_nk) {
			$drv_attr_buff .= "\t# Non-key attributes\n";
			$drv_attr_buff .= $drv_attr_buff_nk;
		}

		$driver_buff .= $drv_attr_buff;
		$driver_buff .= $target_buff;
		$driver_buff =~ s/\n\n$/\n/;

		if ($driver_buff) {
			print $io "TARGET_DRIVER $driver {\n";
			print $io $driver_buff;
			print $io "}\n\n";
		}
	}

	my $dga;
	($dga, $errorString) = $SCST->aluaAttributes();
	my $dga_buff = serializeKeyAttr("\t", $dga);
	my $dga_buff_nk = serializeNkAttr("\t", $dga) if ($nonkey);
	if ($dga_buff_nk) {
		$dga_buff .= "\t# Non-key attributes\n";
		$dga_buff .= $dga_buff_nk;
	}
	if ($dga_buff) {
		print $io "ALUA {\n";
		print $io $dga_buff;
		print $io "}\n\n";
	}

	foreach my $dgroup (sort keys %{$CURRENT{'dgroups'}}) {
		my $dgroup_buff = "";
		my $dgroup_attrs;
		my $dgrp_attr_buff = "";
		my $dgrp_attr_buff_nk = "";

		($dgroup_attrs, $errorString) = $SCST->deviceGroupAttributes($dgroup);
		$dgrp_attr_buff = serializeKeyAttr("\t", $dgroup_attrs);
		$dgrp_attr_buff_nk = serializeNkAttr("\t", $dgroup_attrs) if ($nonkey);
		$dgrp_attr_buff .= "\n" if ($dgrp_attr_buff);
		$dgrp_attr_buff_nk .= "\n" if ($dgrp_attr_buff_nk);

		my $devices_buff = "";

		my $devices = $CURRENT{'dgroups'}->{$dgroup}->{'devices'};

		foreach my $device (sort @{$devices}) {
			$devices_buff .= "\tDEVICE $device\n";
		}

		$devices_buff .= "\n" if ($devices_buff);

		my $tgroups = $CURRENT{'dgroups'}->{$dgroup}->{'tgroups'};

		my $tgroup_buff = "";

		foreach my $tgroup (sort keys %{$tgroups}) {
			$tgroup_buff .= "\tTARGET_GROUP $tgroup";

			my $attributes;
			my $attribute_buff = "";
			my $attribute_buff_nk = "";

			($attributes, $errorString) = $SCST->targetGroupAttributes($dgroup, $tgroup);
			$attribute_buff .= serializeKeyAttr("\t\t", $attributes);
			$attribute_buff_nk .= serializeNkAttr("\t\t", $attributes) if ($nonkey);
			$attribute_buff .= "\n" if ($attribute_buff);
			$attribute_buff_nk .= "\n" if ($attribute_buff_nk);

			my $tgts = $CURRENT{'dgroups'}->{$dgroup}->{'tgroups'}->{$tgroup}->{'targets'};

			my $tgt_buff = "";
			foreach my $tgt (@{$tgts}) {
				$tgt_buff .= "\t\tTARGET $tgt";

				my $tgt_attrs;

				($tgt_attrs, $errorString) = $SCST->targetGroupTargetAttributes($dgroup, $tgroup, $tgt);

				my $t_attribute_buff
				  = serializeKeyAttr("\t\t\t", $tgt_attrs);
				my $t_attribute_buff_nk
				  = serializeNkAttr("\t\t\t", $tgt_attrs) if ($nonkey);

				if ($t_attribute_buff_nk) {
					$t_attribute_buff .= "\t\t\t# Non-key attributes\n";
					$t_attribute_buff .= $t_attribute_buff_nk;
				}

				if ($t_attribute_buff) {
					$tgt_buff .= " {\n";
					$tgt_buff .= $t_attribute_buff;
					$tgt_buff .= "\t\t}\n";
				} else {
					$tgt_buff .= "\n";
				}
			}

			if ($attribute_buff_nk) {
				$attribute_buff .= "\t\t# Non-key attributes\n";
				$attribute_buff .= $attribute_buff_nk;
			}

			if ($attribute_buff || $tgt_buff) {
				$tgroup_buff .= " {\n";

				$tgroup_buff .= $attribute_buff;
				$tgroup_buff .= $tgt_buff;

				$tgroup_buff =~ s/\n\n$/\n/;
				$tgroup_buff .= "\t}\n\n";
			} else {
				$tgroup_buff .= "\n";
			}
		}

		if ($dgrp_attr_buff_nk) {
			$dgrp_attr_buff .= "\t# Non-key attributes\n";
			$dgrp_attr_buff .= $dgrp_attr_buff_nk;
		}

		$dgroup_buff .= $dgrp_attr_buff;
		$dgroup_buff .= $devices_buff;
		$dgroup_buff .= $tgroup_buff;
		$dgroup_buff =~ s/\n\n$/\n/;

		if ($dgroup_buff) {
			print $io "DEVICE_GROUP $dgroup {\n";
			print $io $dgroup_buff;
			print $io "}\n\n";
		}
	}

	$io->flush;
	$io->sync;
	close $io;

	return 0;
}

sub checkConfiguration {
	my $no_drivers;
	my $no_handlers;
	my $warnings = 0;
	my $errors = 0;

	print "-> Checking configuration file '$CONFIGFILE' for errors.\n";

	readConfigFile() if (!$CONFIG);

	if (!scalar keys %{$CONFIG}) {
		print "-> WARNING: Configuration is empty or unreadable, aborting.\n\n";
		exit 0;
	}

	# Check for a minimum sane configuration
	if (!defined($$CONFIG{'TARGET_DRIVER'}) ||
	    !(scalar keys %{$$CONFIG{'TARGET_DRIVER'}})) {
		print "\t-> WARNING: No TARGET_DRIVER section defined. ".
		  "No target drivers will be configured.\n\n";
		$no_drivers = TRUE;
		$warnings++;
	}

	if (!defined($$CONFIG{'HANDLER'}) ||
	    !(scalar keys %{$$CONFIG{'HANDLER'}})) {
		print "\t-> WARNING: No HANDLER section defined. ".
		  "Only physical media will be configured for targets.\n\n";
		$no_handlers = TRUE;
		$warnings++;
	}

	if ($no_drivers && $no_handlers) {
		print "FATAL: No target drivers or handlers defined, aborting!\n";
		$errors++;
	}

	if (!$no_drivers) {
		foreach my $driver (keys %{$$CONFIG{'TARGET_DRIVER'}}) {
			my $no_targets;

			if (!defined($CURRENT{'assign'}->{$driver})) {
				print "\t-> WARNING: Target driver '$driver' is not loaded or available.\n\n";
				$warnings++;
				next;
			}

			if (!defined($$CONFIG{'TARGET_DRIVER'}->{$driver}->{'TARGET'}) ||
			    !(scalar keys %{$$CONFIG{'TARGET_DRIVER'}->{$driver}->{'TARGET'}})) {
				print "\t-> WARNING: Driver '$driver' has no configured targets.\n\n";
				$warnings++;
				$no_targets = TRUE;
			}

			if (!$no_targets) {
				foreach my $target (keys %{$$CONFIG{'TARGET_DRIVER'}->{$driver}->{'TARGET'}}) {
					my $groups = $$CONFIG{'TARGET_DRIVER'}->{$driver}->{'TARGET'}->{$target}->{'GROUP'};
					my %seen_init;
					foreach my $group (keys %{$groups}) {
						foreach my $initiator (keys %{$$groups{$group}->{'INITIATOR'}}) {
							if (defined($seen_init{$initiator})) {
								print "\t-> FATAL: Initiator '$initiator' belongs to more than one group.\n".
								  "\t     Initiators can only belong to one group at a time for a given target.\n";
								$errors++;
							}

							$seen_init{$initiator}++;
						}
					}

					if (!defined($CURRENT{'assign'}->{$driver}->{$target})) {
						if (!$SCST->driverIsVirtualCapable($driver)) {
							print "\t-> FATAL: Target '$target' for driver '$driver' ".
							  "does not exist.\n";
							$errors++;
						}
					}
				}
			}
		}
	}

	my %cdevices;

	foreach my $handler (sort keys %{$$CONFIG{'HANDLER'}}) {
		if (!$SCST->handlerExists($handler)) {
			print "\t-> WARNING: No such handler '$handler' available, ignoring.\n";
			delete $$CONFIG{'HANDLER'}->{$handler};
			$warnings++;
			next;
		}

		foreach my $device (sort keys %{$$CONFIG{'HANDLER'}->{$handler}->{'DEVICE'}}) {
			# Since some people may get confused with how to open
			# a vcdrom, we'll support having '/dev/cdrom' instead of just 'cdrom'.
			if ($device =~ /^\/dev\//) {
				my $_device = $device;
				$_device =~ s/^\/dev\///o;
				my $tree = $$CONFIG{'HANDLER'}->{$handler}->{'DEVICE'}->{$device};
				print "\t-> WARNING: Device '$device' configured for handler '$handler' may ".
				  "not contain the full /dev path, please change to '$_device'.\n\n";
				delete $$CONFIG{'HANDLER'}->{$handler}->{'DEVICE'}->{$device};
				$$CONFIG{'HANDLER'}->{$handler}->{'DEVICE'}->{$_device} = $tree;
				$warnings++;
			} elsif ($device =~ /\//) {
				print "\t-> FATAL: Device '$device' configured for handler '$handler' may not ".
				  "contain character '/'.\n";
				$errors++;
			}

			$cdevices{$device}++;
		}
	}

	foreach my $driver (keys %{$$CONFIG{'TARGET_DRIVER'}}) {
		foreach my $target (keys %{$$CONFIG{'TARGET_DRIVER'}->{$driver}->{'TARGET'}}) {
			my $tgt = $$CONFIG{'TARGET_DRIVER'}->{$driver}->{'TARGET'}->{$target};

			if (defined($$tgt{'LUN'})) {
				foreach my $lun (keys %{$$tgt{'LUN'}}) {
					foreach my $device (keys %{$$tgt{'LUN'}->{$lun}}) {
						if (!defined($cdevices{$device})) {
							print "\t-> WARNING: Device '$device' associated with driver/target ".
							  "'$driver/$target' at LUN $lun is not defined within configuration, ".
							  "removing it.\n\n";
							delete $$tgt{'LUN'}->{$lun};
							$warnings++;
						}
					}
				}

				if ($driver ne 'copy_manager' && !defined($$tgt{'LUN'}->{'0'})) {
					print "\t-> WARNING: No LUN 0 defined for driver/target '$driver/$target'. ".
					  "Many initiators require a LUN 0 to be defined.\n\n";
					$warnings++;
				}
			}

			if (defined($$tgt{'GROUP'})) {
				foreach my $group (keys %{$$tgt{'GROUP'}}) {
					if (defined($$tgt{'GROUP'}->{$group}->{'LUN'})) {
						foreach my $lun (keys %{$$tgt{'GROUP'}->{$group}->{'LUN'}}) {
							foreach my $device (keys %{$$tgt{'GROUP'}->{$group}->{'LUN'}->{$lun}}) {
								if (!defined($cdevices{$device})) {
									print "\t-> WARNING: Device '$device' associated with ".
									  "driver/target '$driver/$target' at LUN $lun is not ".
									  "defined within configuration, removing it.\n\n";
									delete $$tgt{'GROUP'}->{$group}->{'LUN'}->{$lun};
									$warnings++;
								}
							}
						}

						if (!defined($$tgt{'GROUP'}->{$group}->{'LUN'}->{'0'})) {
							print "\t-> WARNING: No LUN 0 defined for driver/target/group '$driver/$target/$group'. ".
							  "Many initiators require a LUN 0 to be defined.\n\n";
							$warnings++;
						}
					}
				}
			}
		}
	}

	foreach my $dgroup (keys %{$$CONFIG{'DEVICE_GROUP'}}) {
		foreach my $device (keys %{$$CONFIG{'DEVICE_GROUP'}->{$dgroup}->{'DEVICE'}}) {
			if (!defined($cdevices{$device})) {
				print "\t-> WARNING: Device '$device' associated with device group '$dgroup' ".
				  "is not defined within configuration, removing it.\n\n";
				delete $$CONFIG{'DEVICE_GROUP'}->{$dgroup}->{'DEVICE'}->{$device};
				$warnings++;
			}
		}
	}

	if ($errors) {
		print "\t-> Done, $errors errors found.\n";
		return TRUE;
	}

	print "\t-> Done, $warnings warnings found.\n\n";

	return FALSE;
}

sub applyConfiguration {
	my $force = shift;
	my $skipRead = shift;
	my $changes = 0;

	readConfigFile() if (!$CONFIG);

	print "-> Applying configuration.\n";

	# Apply config deletions
	if ($force) {
		$changes += applyConfigAssignments($CONFIG, $force, TRUE);
		my $rc = readWorkingConfig($force);
		exit $rc if ($rc);
	}

	# Apply config additions
	$changes += applyConfigDevices($CONFIG, $force, $skipRead);
	$changes += applyConfigAssignments($CONFIG, $force);
	$changes += applyConfigAlua($CONFIG, $force);
	$changes += applyConfigDeviceGroups($CONFIG, $force);
	$changes += applyConfigEnableTargets($CONFIG, $force);
	$changes += applyConfigEnableDrivers($CONFIG, $force);

	# And SCST attributes..
	my %_attributes;
	foreach my $item (keys %{$CONFIG}) {
		next if ($item eq 'HANDLER');
		next if ($item eq 'TARGET_DRIVER');
		next if ($item eq 'ALUA');
		next if ($item eq 'DEVICE_GROUP');
		$_attributes{$item} = $$CONFIG{$item};
	}

	my $attributes = configToAttr(\%_attributes);

	$changes += setScstAttributes($attributes);

	print "\t-> Done, $changes change(s) made.\n";

	return $changes;
}

sub applyConfigDevices {
	my $config = shift;
	my $deletions = shift;
	my $skipRead = shift;
	my $changes = 0;
	my $errorString;

	my $handlers = $CURRENT{'handler'};

	foreach my $handler (keys %{$handlers}) {
		foreach my $device (@{$$handlers{$handler}}) {
			if (!defined($$config{'HANDLER'}->{$handler}->{'DEVICE'}->{$device})) {
				my $attributes;

				($attributes, $errorString) = $SCST->deviceAttributes($device);
				if ($deletions) {
					closeDevice($handler, $device, $deletions);
					$changes++;
				} else {
					print "\t-> Device '$device' is not in configuration. Use -force to close it.\n";
				}
			}
		}
	}

	$handlers = $$config{'HANDLER'};

	foreach my $handler (sort keys %{$handlers}) {
		if (defined($$handlers{$handler}->{'DEVICE'})) {
			my $devices = $$handlers{$handler}->{'DEVICE'};

			foreach my $device (sort keys %{$devices}) {
				my %_attributes;
				my %_cattributes;
				foreach my $item (keys %{$$devices{$device}}) {
					$_attributes{$item} = $$devices{$device}->{$item};
				}

				my $attributes = configToAttr(\%_attributes);
				my $create_attrs = configToAttr(\%_attributes);
				my $possible;
				($possible, $errorString) = $SCST->deviceCreateAttributes($handler);
				condExit($errorString);
				filterCreateAttributes($possible, $create_attrs, FALSE);
				filterCreateAttributes($possible, $attributes, TRUE);

				if (handlerHasDevice($handler, $device)) {
					my $old_create_attrs;
					($old_create_attrs, $errorString) = $SCST->deviceAttributes($device);
					condExit($errorString);
					filterCreateAttributes($possible, $old_create_attrs, FALSE);

					if (compareToKeyAttribute($create_attrs, $old_create_attrs)) {
						print "\t-> Device '$device' is configured differently.\n";

						if ($deletions) {
							print "\t  -> Closing and re-opening with new attributes.\n";
							closeDevice($handler, $device, $deletions);
							openDevice($handler, $device, $create_attrs);
							$changes += 2;
							if (!$skipRead){
								my $rc = readWorkingConfig($deletions);
								exit $rc if ($rc);
							}
						} else {
							print "\t  -> Use -force to re-open device with new attributes. ".
							  "NOTE: This will disrupt all initiators using this device.\n";
						}
					}

					if (scalar keys %{$attributes}) {
						$changes += setDeviceAttributes($device, $attributes, FALSE);
					}

					next;
				}

				openDevice($handler, $device, $create_attrs);
				$changes++;

				if (scalar keys %{$attributes}) {
					$changes += setDeviceAttributes($device, $attributes, $deletions);
				}
			}
		}

		my %_attributes;
		foreach my $item (keys %{$$handlers{$handler}}) {
			next if ($item eq 'DEVICE');
			$_attributes{$item} = $$handlers{$handler}->{$item};
		}

		my $attributes = configToAttr(\%_attributes);

		if (scalar keys %{$attributes}) {
			$changes += setHandlerAttributes($handler, $attributes, $deletions);
		}

	}

	if ($skipRead && $deletions && $changes) {
		my $rc = readWorkingConfig($deletions);
		exit $rc if ($rc);
	}

	return $changes;
}

sub applyConfigAssignments {
	my $config = shift;
	my $deletions = shift;
	my $only_del = shift;
	my $changes = 0;
	my $errorString;

	my $assignments = $CURRENT{'assign'};

	foreach my $driver (keys %{$assignments}) {
		foreach my $target (keys %{$$assignments{$driver}}) {
			my $luns = $$assignments{$driver}->{$target}->{'LUN'};
			my $def_group = $$config{'TARGET_DRIVER'}->{$driver}->{'TARGET'}->{$target};

			foreach my $lun (keys %{$luns}) {
				my $device = $$luns{$lun};

				if (!defined($$def_group{'LUN'}->{$lun}->{$device})) {
					if ($deletions) {
						removeLun($driver, $target, $lun);
						$changes++;
					} elsif ($driver ne 'copy_manager') {
						print "\t-> Device '$device' at LUN '$lun' is not in configuration ".
						  "for driver/target '$driver/$target'. ".
						  "Use -force to remove it.\n";
					}
				} else {
					my $c_attrs = configToAttr($$config{'TARGET_DRIVER'}->{$driver}->{'TARGET'}->{$target}->{'LUN'}->{$lun}->{$device});
					my $o_attrs;
					($o_attrs, $errorString) = $SCST->lunAttributes($driver, $target, $lun);
					condExit($errorString);
					my $possible;
					($possible, $errorString) = $SCST->lunCreateAttributes($driver, $target);
					condExit($errorString);

					filterCreateAttributes($possible, $c_attrs, FALSE);

					if (compareToKeyAttribute($c_attrs, $o_attrs)) {
						print "\t-> Assigned device '$device' in target '$target' at ".
						  "LUN '$lun' is configured differently.\n";

						if ($deletions) {
							print "\t  -> Re-assigning device with new attributes.\n";
							removeLun($driver, $target, $lun);
							addLun($driver, $target, $device, $lun, $c_attrs);
							$changes += 2;
						} else {
							print "\t  -> Use -force to re-assign device with new attributes. ".
							  "NOTE: This will disrupt all initiators using this device.\n";
						}
					}
				}
			}

			foreach my $group (keys %{$$assignments{$driver}->{$target}->{'GROUP'}}) {
				my $luns = $$assignments{$driver}->{$target}->{'GROUP'}->{$group}->{'LUN'};

				my $def_group = $$config{'TARGET_DRIVER'}->{$driver}->{'TARGET'}->{$target}->{'GROUP'}->{$group};

				foreach my $lun (keys %{$luns}) {
					my $device = $$luns{$lun};

					if (!defined($$def_group{'LUN'}->{$lun}->{$device})) {
						if ($deletions) {
							removeLun($driver, $target, $lun, $group);
							$changes++;
						} else {
							print "\t-> Device '$device' at LUN '$lun' is not in configuration ".
							  "for driver/target/group '$driver/$target/$group'. ".
							  "Use -force to remove it.\n";
						}
					} else {
						my $c_attrs = configToAttr($$config{'TARGET_DRIVER'}->{$driver}->{'TARGET'}->{$target}->{'GROUP'}->{$group}->{'LUN'}->{$lun}->{$device});
						my $o_attrs;
						($o_attrs, $errorString) = $SCST->lunAttributes($driver, $target, $lun, $group);
						condExit($errorString);
						my $possible;
						($possible, $errorString) = $SCST->lunCreateAttributes($driver, $target, $group);
						condExit($errorString);

						filterCreateAttributes($possible, $c_attrs, FALSE);

						if (compareToKeyAttribute($c_attrs, $o_attrs)) {
							print "\t-> Assigned device '$device' in group '$group' ".
							  "at LUN '$lun' is configured differently.\n";

							if ($deletions) {
								print "\t  -> Re-assigning device with new attributes.\n";
								removeLun($driver, $target, $lun, $group);
								addLun($driver, $target, $device, $lun, $c_attrs, $group);
								$changes += 2;
							} else {
								print "\t  -> Use -force to re-assign device with new attributes. ".
								  "NOTE: This will disrupt all initiators using this device.\n";
							}
						}
					}
				}

				if (!defined($$config{'TARGET_DRIVER'}->{$driver}->{'TARGET'}->{$target}->{'GROUP'}->{$group})) {
					if ($deletions) {
						removeGroup($driver, $target, $group);
						$changes++;
					} else {
						print "\t-> Group '$group' is not in configuration. Use -force to remove.\n";
					}

					next;
				}
			}
		}
	}

	return $changes if ($only_del);

	$assignments = $$config{'TARGET_DRIVER'};

	foreach my $driver (sort keys %{$assignments}) {
		if (!defined($CURRENT{'assign'}->{$driver})) {
			condExit("Target driver '$driver' is not loaded or available.");
		}

		my %_attributes;
		foreach my $item (keys %{$$assignments{$driver}}) {
			if ($item eq 'TARGET') {
				$changes += applyTargetAssignments($driver, $$assignments{$driver}->{$item},
				  $deletions);
			} elsif ($item ne 'enabled') {
				# Enabling a driver happens in applyConfigEnableDrivers()
				$_attributes{$item} = $$assignments{$driver}->{$item};
			}
		}

		my $attributes = configToAttr(\%_attributes);

		if (scalar keys %{$attributes}) {
			$changes += setDriverAttributes($driver, $attributes, $deletions);
		}
	}

	return $changes;
}

sub applyConfigEnableDrivers {
	my $config = shift;
	my $deletions = shift;
	my $changes = 0;
	my $errorString;

	my $assignments = $$config{'TARGET_DRIVER'};

	foreach my $driver (sort keys %{$assignments}) {
		my %_attributes;
		foreach my $item (keys %{$$assignments{$driver}}) {
			if ($item eq 'enabled') {
				$_attributes{$item} = $$assignments{$driver}->{$item};
			}
		}

		my $attributes = configToAttr(\%_attributes);
		my $d_attributes;
		($d_attributes, $errorString) = $SCST->driverAttributes($driver);

		if (defined($$d_attributes{'enabled'}) &&
		    ($$d_attributes{'enabled'}->{'value'} != $$attributes{'enabled'})) {
			setDriverAttribute($driver, 'enabled', $$attributes{'enabled'});
			$changes++;
		}
	}

	return $changes;
}

sub applyConfigAlua {
	my $config = shift;
	my $deletions = shift;

	my $alua_attr = $$config{'ALUA'};
	my %_attributes;
	foreach my $item (keys %{$alua_attr}) {
		$_attributes{$item} = $alua_attr->{$item};
	}
	my $attributes = configToAttr(\%_attributes);
	return setAluaAttributes($attributes);
}

sub applyConfigDeviceGroups {
	my $config = shift;
	my $deletions = shift;
	my $changes = 0;

	my $dgroups = $CURRENT{'dgroups'};

	foreach my $dgroup (keys %{$dgroups}) {
		if (!defined($$config{'DEVICE_GROUP'}->{$dgroup})) {
			if ($deletions) {
				removeDeviceGroup($dgroup, TRUE);
				$changes++;
			} else {
				print "\t-> Device Group '$dgroup' is not in configuration. Use -force to remove.\n";
			}
		} else {
			my $devices = $CURRENT{'dgroups'}->{$dgroup}->{'devices'};

			foreach my $device (@{$devices}) {
				if (!defined($$config{'DEVICE_GROUP'}->{$dgroup}->{'DEVICE'}->{$device})) {
					if ($deletions) {
						removeDeviceGroupDevice($dgroup, $device);
						$changes++;
					} else {
						print "\t-> Device '$device' within device group '$dgroup' is not in configuration. Use -force to remove.\n";
					}
				}
			}

			foreach my $tgroup (keys %{$$dgroups{$dgroup}->{'tgroups'}}) {
				if (!defined($$config{'DEVICE_GROUP'}->{$dgroup}->{'TARGET_GROUP'}->{$tgroup})) {
					if ($deletions) {
						removeTargetGroup($dgroup, $tgroup, TRUE);
						$changes++;
					} else {
						print "\t-> Target Group '$dgroup/$tgroup' is not in configuration. Use -force to remove.\n";
					}
				} else {
					my $tgts = $$dgroups{$dgroup}->{'tgroups'}->{$tgroup}->{'targets'};

					foreach my $tgt (@{$tgts}) {
						if (!defined($$config{'DEVICE_GROUP'}->{$dgroup}->{'TARGET_GROUP'}->{$tgroup}->{'TARGET'}->{$tgt})) {
							if ($deletions) {
								removeTargetGroupTarget($dgroup, $tgroup, $tgt);
								$changes++;
							} else {
								print "\t-> Target '$dgroup/$tgroup/$tgt' is not in configuration. Use -force to remove.\n";
							}
						}
					}
				}
			}
		}
	}

	$dgroups = $$config{'DEVICE_GROUP'};

	foreach my $dgroup (sort keys %{$dgroups}) {
		if (!defined($CURRENT{'dgroups'}->{$dgroup})) {
			addDeviceGroup($dgroup);
			$changes++;
		}

		my $devices = $$dgroups{$dgroup}->{'DEVICE'};

		foreach my $device (sort keys %{$devices}) {
			if (!deviceGroupHasDevice($dgroup, $device)) {
				addDeviceGroupDevice($dgroup, $device);
				$changes++;
			}
		}

		my $tgroups = $$dgroups{$dgroup}->{'TARGET_GROUP'};

		foreach my $tgroup (sort keys %{$tgroups}) {
			if (!defined($CURRENT{'dgroups'}->{$dgroup}->{'tgroups'}->{$tgroup})) {
				addTargetGroup($dgroup, $tgroup);
				$changes++;
			}

			my $tgts = $$tgroups{$tgroup}->{'TARGET'};

			foreach my $tgt (keys %{$tgts}) {
				if (!arrayHasValue($CURRENT{'dgroups'}->{$dgroup}->{'tgroups'}->{$tgroup}->{'targets'}, $tgt)) {
					addTargetGroupTarget($dgroup, $tgroup, $tgt);
					$changes++;
				}

				my %_attributes;
				foreach my $item (keys %{$$tgts{$tgt}}) {
					$_attributes{$item} = $$tgts{$tgt}->{$item};
				}

				my $attributes = configToAttr(\%_attributes);

				if (scalar keys %{$attributes}) {
					$changes += setTargetGroupTargetAttributes($dgroup, $tgroup, $tgt, $attributes);
				}
			}

			my %_attributes;
			foreach my $item (keys %{$$tgroups{$tgroup}}) {
				next if ($item eq 'TARGET');
				$_attributes{$item} = $$tgroups{$tgroup}->{$item};
			}

			my $attributes = configToAttr(\%_attributes);

			if (scalar keys %{$attributes}) {
				$changes += setTargetGroupAttributes($dgroup, $tgroup, $attributes);
			}
		}

		my %_attributes;
		foreach my $item (keys %{$$dgroups{$dgroup}}) {
			next if ($item eq 'TARGET_GROUP');
			next if ($item eq 'DEVICE');
			$_attributes{$item} = $$dgroups{$dgroup}->{$item};
		}

		my $attributes = configToAttr(\%_attributes);

		if (scalar keys %{$attributes}) {
			$changes += setDeviceGroupAttributes($dgroup, $attributes);
		}
	}

	return $changes;
}

sub applyInitiatorAssignments {
	my $driver = shift;
	my $target = shift;
	my $groups = shift;
	my $deletions = shift;
	my %configured;
	my %running;
	my $changes = 0;

	my $current = $CURRENT{'assign'}->{$driver}->{$target}->{'GROUP'};

	foreach my $group (keys %{$current}) {
		my $initiators = $$current{$group}->{'INITIATORS'};

		foreach my $init (@{$initiators}) {
			$running{$init} = $group;
		}
	}

	foreach my $group (keys %{$groups}) {
		my $initiators = $$groups{$group}->{'INITIATOR'};

		foreach my $init (keys %{$initiators}) {
			$configured{$init} = $group;
		}
	}

	foreach my $init (keys %running) {
		if (!defined($configured{$init})) {
			my $group = $running{$init};

			if ($deletions) {
				removeInitiator($driver, $target, $group, $init);
				$changes++;
			} else {
				print "\t-> Initiator '$init' is not in configuration ".
				  "for driver/target/group '$driver/$target/$group'. ".
				  "Use -force to remove it.\n";
			}
		} else {
			if ($configured{$init} ne $running{$init}) {
				if ($deletions) {
					moveInitiator($driver, $target, $running{$init}, $init, $configured{$init});
					$changes++;
				} else {
					print "\t-> Initiator '$init' is moving to group '".
					  $configured{$init}."' from group '".$running{$init}."'. ".
					  "Use -force to move it.\n";
				}
			}
		}
	}

	foreach my $init (keys %configured) {
		if (!defined($running{$init})) {
			addInitiator($driver, $target, $configured{$init}, $init);
			$changes++;
		}
	}

	return $changes;
}

sub applyTargetAssignments {
	my $driver = shift;
	my $targets = shift;
	my $deletions = shift;
	my $changes = 0;

	foreach my $target (keys %{$CURRENT{'assign'}->{$driver}}) {
		if (!defined($$targets{$target})) {
			my $isVirtual = ($SCST->targetType($driver, $target) == $SCST::SCST::TGT_TYPE_VIRTUAL);

			if ($deletions && $isVirtual) {
				my $rc = removeVirtualTarget($driver, $target);
				condExit($SCST->errorString($rc));
				$changes++;
			} else {
				print "\t-> Virtual target '$target' for driver '$driver' is not in configuration. ".
				  "Use -force to remove it.\n";
			}
		}
	}

	my $possible;

	my ($is_virtual, $errorString) = $SCST->driverIsVirtualCapable($driver);

	if ($is_virtual) {
		($possible, $errorString) = $SCST->targetCreateAttributes($driver);
	}

	foreach my $target (sort keys %{$targets}) {
		if (!defined($CURRENT{'assign'}->{$driver}->{$target})) {
			if (!$is_virtual) {
				condExit("Target '$target' for driver '$driver' does not exist.");
			} else {
				my %_attributes;

				foreach my $item (keys %{$$targets{$target}}) {
					next if ($item eq 'GROUP');
					next if ($item eq 'LUN');
					$_attributes{$item} = $$targets{$target}->{$item};
				}

				my $attributes = configToAttr(\%_attributes);

				if (defined($$attributes{'HW_TARGET'})) {
					condExit("Hardware target '$target' for driver '$driver' does not exist.");
				}

				filterCreateAttributes($possible, $attributes, FALSE);

				my $rc = addVirtualTarget($driver, $target, $attributes);
				condExit($SCST->errorString($rc));
				$changes++ if (!$rc);
			}
		}

		# Apply attribute changes first in case we want a different address method applied
		my %_attributes;
		foreach my $item (keys %{$$targets{$target}}) {
			# Handle enabled attribute last
			next if (($item eq 'GROUP') || ($item eq 'LUN') || ($item eq 'enabled'));
			$_attributes{$item} = $$targets{$target}->{$item};
		}

		my $attributes = configToAttr(\%_attributes);
		if ($SCST->targetType($driver, $target) == $SCST::SCST::TGT_TYPE_VIRTUAL) {
			filterCreateAttributes($possible, $attributes, TRUE);
		}
		$changes += setTargetAttributes($driver, $target, $attributes, $deletions);

		foreach my $item (keys %{$$targets{$target}}) {
			if ($item eq 'GROUP') {
				$changes += applyGroupAssignments($driver, $target, $$targets{$target}->{$item});
				$changes += applyInitiatorAssignments($driver, $target, $$targets{$target}->{$item}, $deletions);
			} elsif ($item eq 'LUN') {
				$changes += applyLunAssignments($driver, $target, undef, $$targets{$target}->{$item});
			}
		}
	}

	return $changes;
}

sub applyConfigEnableTargets {
	my $config = shift;
	my $deletions = shift;
	my $changes = 0;
	my $errorString;

	my $assignments = $$config{'TARGET_DRIVER'};

	foreach my $driver (sort keys %{$assignments}) {
		foreach my $driver_item (keys %{$$assignments{$driver}}) {
			next if ($driver_item ne 'TARGET');
			my $targets = $$assignments{$driver}->{$driver_item};
			foreach my $target (sort keys %{$targets}) {
				my %_attributes = ();
				foreach my $target_item (keys %{$$targets{$target}}) {
					if ($target_item eq 'enabled') {
						$_attributes{$target_item} = $$targets{$target}->{$target_item};
					}
				}

				my $attributes = configToAttr(\%_attributes);
				my $t_attributes;
				($t_attributes, $errorString) = $SCST->targetAttributes($driver, $target);

				if (defined($$t_attributes{'enabled'}) &&
				    ($$t_attributes{'enabled'}->{'value'} != $$attributes{'enabled'})) {
					setTargetAttribute($driver, $target, 'enabled', $$attributes{'enabled'});
					$changes++;
				}
			}
		}
	}

	return $changes;
}

sub applyGroupAssignments {
	my $driver = shift;
	my $target = shift;
	my $groups = shift;
	my $changes = 0;

	foreach my $group (sort keys %{$groups}) {
		if (!defined($CURRENT{'assign'}->{$driver}->{$target}->{'GROUP'}->{$group})) {
			addGroup($driver, $target, $group);
			$changes++;
		}


		my %_attributes;
		foreach my $item (keys %{$$groups{$group}}) {
			if ($item eq 'LUN') {
				$changes += applyLunAssignments($driver, $target, $group,
				  $$groups{$group}->{$item});
			} elsif ($item eq 'INITIATOR') {
				next;
			} else {
				$_attributes{$item} = $$groups{$group}->{$item};
			}
		}

		my $attributes = configToAttr(\%_attributes);

		$changes += setGroupAttributes(undef, $driver, $target, $group, $attributes);
	}

	return $changes;
}

sub applyLunAssignments {
	my $driver = shift;
	my $target = shift;
	my $group = shift;
	my $luns = shift;
	my $c_luns;
	my $changes = 0;

	if (defined($group)) {
		$c_luns = $CURRENT{'assign'}->{$driver}->{$target}->{'GROUP'}->{$group}->{'LUN'};
	} else {
		$c_luns = $CURRENT{'assign'}->{$driver}->{$target}->{'LUN'};
	}

	foreach my $lun (sort keys %{$luns}) {
		if (!defined($$c_luns{$lun})) {
			if ((scalar keys %{$$luns{$lun}}) > 1) {
				immediateExit("Invalid configuration encountered. ".
				  "Driver/target/group/lun $driver/$target/$group/$lun ".
				  "has multiple devices assigned.");
			}

			foreach my $device (sort keys %{$$luns{$lun}}) {
				my $attributes = configToAttr($$luns{$lun}->{$device});
				addLun($driver, $target, $device, $lun, $attributes, $group);
				$changes++;
			}
		}
	}

	return $changes;
}

sub filterCreateAttributes {
	my $creates = shift;
	my $attrs = shift;
	my $keep = shift;

	foreach my $attribute (keys %{$attrs}) {
		my $good = defined($$creates{$attribute}) ? TRUE : FALSE;

		if (($keep && $good) || (!$keep && !$good)) {
			delete $$attrs{$attribute};
		}
	}
}

sub compareToKeyAttribute {
	my $first = shift;
	my $second = shift;

	foreach my $attr (keys %{$first}) {
		if (defined($$second{$attr}->{'keys'})) {
			next if (!defined($$second{$attr}->{'keys'}->{'0'}->{'value'}) && ($$first{$attr} == 0));
			return TRUE if ($$first{$attr} ne $$second{$attr}->{'keys'}->{'0'}->{'value'});
		} else {
			next if (!defined($$second{$attr}->{'value'}) && ($$first{$attr} == 0));
			return TRUE if ($$first{$attr} ne $$second{$attr}->{'value'});
		}
	}

	foreach my $attr (keys %{$second}) {
		if (defined($$second{$attr}->{'keys'}) && !defined($$first{$attr})) {
			return TRUE;
		}
	}

	return FALSE;
}

sub clearActifioConfig{
        my $dgroups = $CURRENT{'dgroups'};
        my $assignments = $CURRENT{'assign'};

        print "-> Clearing running configuration, but leaving targets enabled.\n";

        print "\t-> Configuration cleared.\n";

        foreach my $dgroup (sort keys %{$dgroups}) {
                foreach my $tgroup (sort keys %{$$dgroups{$dgroup}->{'tgroups'}}) {
                        removeTargetGroup($dgroup, $tgroup, TRUE);
                }       

                foreach my $device (@{$$dgroups{$dgroup}->{'devices'}}) {
                        removeDeviceGroupDevice($dgroup, $device, TRUE);
                }       

                removeDeviceGroup($dgroup, TRUE);
        }       

        foreach my $driver (sort keys %{$assignments}) {
                foreach my $target (sort keys %{$$assignments{$driver}}) {
                        foreach my $group (sort keys %{$$assignments{$driver}->{$target}->{'GROUP'}}) {
                                clearInitiators($driver, $target, $group);
                                clearLuns($driver, $target, $group);
                                removeGroup($driver, $target, $group, TRUE);
                        }

                        clearLuns($driver, $target);
                        removeTargetDynamicAttributes($driver, $target);

                        if ($SCST->targetType($driver, $target) == $SCST::SCST::TGT_TYPE_VIRTUAL) {
                                my $rc = removeVirtualTarget($driver, $target);
                                issueWarning($SCST->errorString($rc)) if ($rc);
                        }
                }

                clearDriverDynamicAttributes($driver);
        }

        my $handlers = $CURRENT{'handler'};

        foreach my $handler (sort keys %{$handlers}) {
                foreach my $device (@{$$handlers{$handler}}) {
                        my ($attributes, $errorString) = $SCST->deviceAttributes($device);
                        closeDevice($handler, $device, TRUE);
                }
        }

        # Todo - check return code

        my ($drivers, $errorString) = $SCST->drivers();

        foreach my $driver (@{$drivers}) {
                my ($targets, $errorString) = $SCST->targets($driver);

                foreach my $target (@{$targets}) {
                #       disableTarget($driver, $target);
                }

        #       disableDriver($driver);
        }

        print "\t-> Configuration cleared.\n";

        return FALSE
}

sub clearConfiguration {
	my $dgroups = $CURRENT{'dgroups'};
	my $assignments = $CURRENT{'assign'};
	my $errorString;

	print "-> Clearing running configuration.\n";

	foreach my $dgroup (sort keys %{$dgroups}) {
		foreach my $tgroup (sort keys %{$$dgroups{$dgroup}->{'tgroups'}}) {
			removeTargetGroup($dgroup, $tgroup, TRUE);
		}

		foreach my $device (@{$$dgroups{$dgroup}->{'devices'}}) {
			removeDeviceGroupDevice($dgroup, $device, TRUE);
		}

		removeDeviceGroup($dgroup, TRUE);
	}

	foreach my $driver (sort keys %{$assignments}) {
		foreach my $target (sort keys %{$$assignments{$driver}}) {
			foreach my $group (sort keys %{$$assignments{$driver}->{$target}->{'GROUP'}}) {
				clearInitiators($driver, $target, $group);
				clearLuns($driver, $target, $group);
				removeGroup($driver, $target, $group, TRUE);
			}

			clearLuns($driver, $target);
			removeTargetDynamicAttributes($driver, $target);

			if ($SCST->targetType($driver, $target) == $SCST::SCST::TGT_TYPE_VIRTUAL) {
				my $rc = removeVirtualTarget($driver, $target);
				issueWarning($SCST->errorString($rc)) if ($rc);
			}
		}

		clearDriverDynamicAttributes($driver);
	}

	my $handlers = $CURRENT{'handler'};

	foreach my $handler (sort keys %{$handlers}) {
		foreach my $device (@{$$handlers{$handler}}) {
			my $attributes;

			($attributes, $errorString) = $SCST->deviceAttributes($device);
			closeDevice($handler, $device, TRUE);
		}
	}

	# Todo - check return code

	my $drivers;
	($drivers, $errorString) = $SCST->drivers();

	foreach my $driver (@{$drivers}) {
		my $targets;

		($targets, $errorString) = $SCST->targets($driver);
		foreach my $target (@{$targets}) {
			disableTarget($driver, $target);
		}

		disableDriver($driver);
	}

	print "\t-> Configuration cleared.\n";

	return FALSE;
}

sub addVirtualTarget {
	my $driver = shift;
	my $target = shift;
	my $attributes = shift;
	my $errorString;
	my $targets;

	# Enable all hardware targets before creating virtual ones
	($targets, $errorString) = $SCST->targets($driver);
	foreach my $_target (@{$targets}) {
		my $attributes;

		($attributes, $errorString) = $SCST->targetAttributes($driver, $_target);
		if (defined($$attributes{'hw_target'}) &&
		    !$$attributes{'enabled'}->{'value'}) {
			enableTarget($driver, $_target);
		}
	}

	print "\t-> Creating target '$target' for driver '$driver': ";
	my $rc = $SCST->addVirtualTarget($driver, $target, $attributes);
	print "done.\n";

	return $rc;
}

sub removeVirtualTarget {
	my $driver = shift;
	my $target = shift;

	print "\t-> Removing virtual target '$target' from driver '$driver': ";
	my $rc = $SCST->removeVirtualTarget($driver, $target);
	print "done.\n";

	return $rc;
}

####################################################################

sub listHandlers {
	my $handler = shift;

	return listHandler($handler) if ($handler);

	my ($handlers, $errorString) = $SCST->handlers();

	my $l_handler = 0;
	foreach my $handler (@{$handlers}) {
		$l_handler = length($handler) if ($l_handler < length($handler));
	}

	print "\tHandler\n";
	print "\t";
	for (my $x = 0; $x < $l_handler; $x++) {
		print "-";
	};
	print "\n";

	foreach my $handler (@{$handlers}) {
		print "\t$handler\n";
	}

	return FALSE;
}

sub listHandler {
	my $handler = shift;
	my %toprint;

	my $got_handler = valid($handler);
	my ($handlers, $errorString) = $SCST->handlers();

	my $l_device = 0;
	my $l_handler = 0;
	foreach my $_handler (@{$handlers}) {
		$handler = $_handler if (!$got_handler);

		if ($handler eq $_handler) {
			$toprint{$handler}++;

			$l_handler = length($handler) if ($l_handler < length($handler));

			my $devices;

			($devices, $errorString) = $SCST->devicesByHandler($handler);
			if ($#{$devices} == -1) {
				push @{$devices}, '-';
			}

			foreach my $device (@{$devices}) {
				$l_device = length($device) if ($l_device < length($device));
			}
		}
	}

	if (scalar keys %toprint) {
		printf("\t%-*s     %-*s\n", $l_handler, 'Handler', $l_device, 'Device');
		print "\t";
		for (my $x = 0; $x < ($l_handler + $l_device + 5); $x++) {
			print "-";
		};
		print "\n";

		foreach my $handler (sort keys %toprint) {
			my $devices;
			my $first = TRUE;

			($devices, $errorString) = $SCST->devicesByHandler($handler);
			if ($#{$devices} == -1) {
				push @{$devices}, '-';
			}

			foreach my $device (sort @{$devices}) {
				if ($first) {
					printf("\t%-*s    %-*s\n", $l_handler, $handler, $l_device, $device);
					$first = FALSE;
				} else {
					printf("\t%-*s    %-*s\n", $l_handler, '', $l_device, $device);
				}
			}
		}
	} else {
		print "No such handler '$handler' found.\n";
	}

	return FALSE;
}

sub listDevices {
	my $device = shift;
	my $nonkey = shift;

	return listDevice($device, $nonkey) if (valid($device));
	return listHandler();
}

sub listDevice {
	my $device = shift;
	my $nonkey = shift;

	my ($attributes, $errorString) = $SCST->deviceAttributes($device);

	return TRUE if issueWarning($errorString);

	if (!scalar(keys %{$attributes})) {
		print "No such device '$device' exists.\n";
		return;
	}

	return listAttributes($attributes, $nonkey);
}

sub listDeviceGroups {
	my $group = shift;
	my $showall = shift;

	return listDeviceGroup($group) if (valid($group));

	my ($groups, $errorString) = $SCST->deviceGroups();

	my $l_group = 0;
	foreach my $group (@{$groups}) {
		$l_group = length($group) if ($l_group < length($group));
	}

	$l_group = 12 if ($l_group < 12);

	print "\tDevice Group\n";
	print "\t";
	for (my $x = 0; $x < $l_group; $x++) {
		print "-";
	}
	print "\n";

	foreach my $group (@{$groups}) {
		print "\t$group\n\n";
		listTargetGroups($group, undef, TRUE) if ($showall);
	}

	return FALSE;
}

sub listDeviceGroup {
	my $group = shift;
	my $errorString;
	my $devices;
	my $l_device = 0;

	($devices, $errorString) = $SCST->deviceGroupDevices($group);
	foreach my $device (@{$devices}) {
		$l_device = length($device) if ($l_device < length($device));
	}

	$l_device = 7 if ($l_device < 6);

	print "\tDevices\n";
	print "\t";
	for (my $x = 0; $x < $l_device; $x++) {
		print "-";
	}
	print "\n";

	foreach my $device (@{$devices}) {
		print "\t$device\n";
	}

	my $tgroups;
	my $l_tgroup = 0;

	($tgroups, $errorString) = $SCST->targetGroups($group);
	foreach my $tgroup (@{$tgroups}) {
		$l_tgroup = length($tgroup) if ($l_tgroup < length($tgroup));
	}

	$l_tgroup = 12 if ($l_tgroup < 12);

	print "\n\tTarget Groups\n";
	print "\t";
	for (my $x = 0; $x < $l_tgroup; $x++) {
		print "-";
	}
	print "\n";

	foreach my $tgroup (@{$tgroups}) {
		print "\t$tgroup\n";
	}

	return FALSE;
}

sub listTargetGroups {
	my $group = shift;
	my $tgroup = shift;
	my $indent = shift;

	return listDeviceGroups(undef, TRUE) if (!valid($group));
	return listTargetGroup($group, $tgroup) if (valid($tgroup));

	my ($tgroups, $errorString) = $SCST->targetGroups($group);

	my $l_tgroup = 0;
	foreach my $tgroup (@{$tgroups}) {
		$l_tgroup = length($tgroup) if ($l_tgroup < length($tgroup));
	}

	$l_tgroup = 12 if ($l_tgroup < 12);

	print "\n";
	print "\t" if ($indent);
	print "\tTarget Groups\n";
	print "\t";
	print "\t" if ($indent);
	for (my $x = 0; $x < $l_tgroup; $x++) {
		print "-";
	}
	print "\n";

	foreach my $tgroup (@{$tgroups}) {
		print "\t" if ($indent);
		print "\t$tgroup\n";
	}

	return FALSE;
}

sub listTargetGroup {
	my $group = shift;
	my $tgroup = shift;

	my ($targets, $errorString) = $SCST->targetGroupTargets($group, $tgroup);

	my $l_tgt = 0;
	foreach my $tgt (@{$targets}) {
		$l_tgt = length($tgt) if ($l_tgt < length($tgt));
	}

	$l_tgt = 7 if ($l_tgt < 7);

	print "\tTargets\n";
	print "\t";
	for (my $x = 0; $x < $l_tgt; $x++) {
		print "-";
	}
	print "\n";

	foreach my $tgt (@{$targets}) {
		print "\t$tgt\n";
	}

	return FALSE;
}

sub listDeviceGroupDevices {
	my $group = shift;
	my $device = shift;

	return listDevice($device) if ($device);

	my ($devices, $errorString) = $SCST->deviceGroupDevices($group);

	my $l_device = 0;
	foreach my $device (@{$devices}) {
		$l_device = length($device) if ($l_device < length($device));
	}

	$l_device = 7 if ($l_device < 7);

	print "\tDevices\n";
	print "\t";
	for (my $x = 0; $x < $l_device; $x++) {
		print "-";
	}
	print "\n";

	foreach my $device (@{$devices}) {
		print "\t$device\n";
	}

	return FALSE;
}

sub listDrivers {
	my $driver = shift;

	return listTargets($driver, undef) if (valid($driver));

	my ($drivers, $errorString) = $SCST->drivers();

	my $l_driver = 0;
	foreach my $driver (@{$drivers}) {
		$l_driver = length($driver) if ($l_driver < length($driver));
	}

	print "\tDriver\n";
	print "\t";
	for (my $x = 0; $x < $l_driver; $x++) {
		print "-";
	}
	print "\n";

	foreach my $driver (@{$drivers}) {
		print "\t$driver\n";
	}

	return FALSE;
}

sub listTargets {
	my $driver = shift;
	my $target = shift;
	my %toprint;

	return listGroups($driver, $target, undef) if (valid($target, $driver));

	my $got_driver = valid($driver);

	my ($drivers, $errorString) = $SCST->drivers();

	my $l_driver = 0;
	my $l_target = 0;
	foreach my $_driver (@{$drivers}) {
		$driver = $_driver if (!$got_driver);

		if ($driver eq $_driver) {
			$toprint{$driver}++;

			$l_driver = length($driver) if ($l_driver < length($driver));

			my $targets;
			($targets, $errorString) = $SCST->targets($driver);

			foreach my $target (@{$targets}) {
				$l_target = length($target) if ($l_target < length($target));
			}
		}
	}

	if (scalar(keys %toprint)) {
		printf("\t%-*s %-*s\n", $l_driver, 'Driver', $l_target, 'Target');
		print "\t";
		for (my $x = 0; $x < ($l_driver + $l_target + 1); $x++) {
			print "-";
		}
		print "\n";

		my %p;

		foreach my $driver (sort keys %toprint) {
			my $targets;

			($targets, $errorString) = $SCST->targets($driver);
			foreach my $target (@{$targets}) {
				if (!defined($p{$driver})) {
					printf("\t%-*s %-*s\n", $l_driver, $driver, $l_target, $target);
					$p{$driver}++;
				} else {
					printf("\t%-*s %-*s\n", $l_driver, '', $l_target, $target);
				}
			}
		}
	} else {
		print "No such driver '$driver' exists.\n";
	}

	return FALSE;
}

sub listSessions {
	my ($drivers, $errorString) = $SCST->drivers();

	foreach my $driver (@{$drivers}) {
		my $targets;

		($targets, $errorString) = $SCST->targets($driver);
		foreach my $target (@{$targets}) {
			my $had_sessions = FALSE;
			my $sessions;

			print "Driver/Target: $driver/$target\n\n";

			($sessions, $errorString) = $SCST->sessions($driver, $target);
			foreach my $session (keys %{$sessions}) {
				print "\tSession: $session\n\n";

				my %attributes = ( );
				foreach my $attr (keys %{$$sessions{$session}}) {
					if ($attr eq 'luns') {
						foreach my $lun (keys %{$$sessions{$session}->{'luns'}}) {
							$attributes{"LUN $lun"}->{'value'} =
							  $$sessions{$session}->{'luns'}->{$lun};
						}
					} else {
						$attributes{$attr}->{'value'} = $$sessions{$session}->{$attr}->{'value'};
					}
				}

				listAttributes(\%attributes, TRUE);

				print "\n";

				$had_sessions = TRUE;
			}

			if (!$had_sessions) {
				print "\t(no sessions)\n\n";
			}
		}
	}

	return FALSE;
}

sub listGroup {
	my $driver = shift;
	my $target = shift;
	my $group = shift;
	my $luns = shift;
	my $initiators = shift;
	my $errorString;

	($luns, $errorString) = $SCST->luns($driver, $target, $group) if (!$luns);
	if (!valid($initiators) && valid($group)) {
		($initiators, $errorString) = $SCST->initiators($driver, $target, $group);
		return TRUE if issueWarning($errorString);
	}

	if ((keys %{$luns}) || ($#{$initiators} > -1)) {
		my $l_device = 0;
		foreach my $lun (keys %{$luns}) {
			$l_device = length($$luns{$lun}) if (length($$luns{$lun}) > $l_device);
		}

		my $l_initiator = 0;
		foreach my $initiator (@{$initiators}) {
			$l_initiator = length($initiator) if (length($initiator) > $l_initiator);
		}

		print "Assigned LUNs:\n\n";

		if (keys %{$luns}) {
			printf("\t%-4s %-*s\n", 'LUN', $l_device, 'Device');
			print "\t";
			for (my $x = 0; $x < ($l_device + 5); $x++) {
				print "-";
			}
			print "\n";

			foreach my $lun (sort keys %{$luns}) {
				my $device = $$luns{$lun};

				printf("\t%-4s %-*s\n", $lun, $l_device, $$luns{$lun});
			}
		} else {
			print "\t(none)\n";
		}

		if (valid($group)) {
			print "\nAssigned Initiators:\n\n";

			if ($#{$initiators} > -1) {
				print "\tInitiator\n";
				print "\t";
				for (my $x = 0; $x < $l_initiator; $x++) {
					print "-";
				}
				print "\n";

				foreach my $initiator (@{$initiators}) {
					print "\t$initiator\n";
				}
			} else {
				print "\t(none)\n";
			}
		}
	} else {
		if (valid($group)) {
			print "Group '$group' has no associated LUNs or initiators.\n";
		} else {
			print "Driver/target '$driver/$target' has no associated LUNs.\n";
		}
	}

	return FALSE;
}

sub listGroups {
	my $driver = shift;
	my $target = shift;
	my $group = shift;
	my $found = FALSE;

	if (valid($group, $driver, $target)) {
		return listGroup($driver, $target, $group);
	}

	my $got_group = $group;
	my $got_target = $target;
	my $got_driver = $driver;

	my ($drivers, $errorString) = $SCST->drivers();

	foreach my $_driver (@{$drivers}) {
		$driver = $_driver if (!$got_driver);

		if ($driver eq $_driver) {
			my $targets;

			($targets, $errorString) = $SCST->targets($driver);
			foreach my $_target (@{$targets}) {
				$target = $_target if (!$got_target);

				if ($target eq $_target) {
					$found++;
					print "Driver: $driver\n";
					print "Target: $target\n\n";

					listGroup($driver, $target, undef);

					print "\n";

					my $groups;

					($groups, $errorString) = $SCST->groups($driver, $target);
					foreach my $_group (@{$groups}) {
						$group = $_group if (!$got_group);

						if ($group eq $_group) {
							print "Group: $group\n\n";

							listGroup($driver, $target, $group);

							print "\n\n";
						}
					}
				}
			}
		}
	}

	if (!$found) {
		if ($got_driver && $got_target) {
			print "Driver/target '$driver/$target' not found\n";
		} elsif (!$got_target) {
			print "Driver '$driver' not found.\n";
		} else {
			print "Target '$target' not found.\n";
		}
	}

	return FALSE;
}

sub listExported {
	my $device = shift;
	my $attributes = shift;
	my $exported = $$attributes{'exported'}->{'value'};
	my $l_driver = length('Driver');
	my $l_target = length('Target');
	my $l_group  = length('Group');
	my $fmt = "\t%-*s %-*s %-*s %-4s\n";

	foreach my $driver (keys %{$exported}) {
		$l_driver = length($driver)
		    if (length($driver) > $l_driver);

		foreach my $target (keys %{$$exported{$driver}}) {
			$l_target = length($target)
			    if (length($target) > $l_target);

			foreach my $group (keys %{$$exported{$driver}->{$target}}) {
				$l_group = length($group)
				    if (length($group) > $l_group);
			}
		}
	}

	print "Device '$device' is currently in use by the following:\n\n";
	printf($fmt, $l_driver, 'Driver', $l_target, 'Target',
	       $l_group, 'Group', 'Lun');
	printf($fmt, $l_driver, join("", "-" x $l_driver),
	       $l_target, join("", "-" x $l_target),
	       $l_group, join("", "-" x $l_group), join("", "-" x 4));

	foreach my $driver (sort keys %{$exported}) {
		foreach my $target (sort keys %{$$exported{$driver}}) {
			foreach my $group (sort keys %{$$exported{$driver}->{$target}}) {
				my $lun = $$exported{$driver}->{$target}->{$group};
				printf($fmt, $l_driver, $driver, $l_target,
				       $target, $l_group, $group, $lun);
			}
		}
	}
}

sub listAttributes {
	my $attributes = shift;
	my $nonkey = shift;
	my $l_attr = 9;
	my $l_value = 5;

	foreach my $attribute (keys %{$attributes}) {
		if (defined($$attributes{$attribute}->{'keys'})) {
			$l_attr = length($attribute) if ($l_attr < length($attribute));

			foreach my $key (keys %{$$attributes{$attribute}->{'keys'}}) {
				my $value = $$attributes{$attribute}->{'keys'}->{$key}->{'value'};
				$l_value = length($value) if ($l_value < length($value));
			}
		} elsif ($nonkey) {
			$l_attr = length($attribute) if ($l_attr < length($attribute));
			my $value = $$attributes{$attribute}->{'value'};
			if (($attribute eq 'trace_level') && $value) {
				foreach my $level (split(/\|/, $value)) {
					$level =~ s/^\s+//; $level =~ s/\s+$//;
					$l_value = length($level) if ($l_value < length($level));
				}

				next;
			}
			$l_value = length($value) if ($l_value < length($value));
		}
	}

	printf("\t%-*s     %-*s     %-*s     %-*s\n", $l_attr, 'Attribute',
	       $l_value, 'Value', 9, 'Writable', 3, 'KEY');
	print "\t";
	for (my $x = 0; $x < ($l_attr + $l_value + 27); $x++) {
		print "-";
	};
	print "\n";

	my $found = FALSE;

	foreach my $attribute (sort keys %{$attributes}) {
		my $first = TRUE;

		if (defined($$attributes{$attribute}->{'keys'})) {
			foreach my $key (sort keys %{$$attributes{$attribute}->{'keys'}}) {
				my $value = $$attributes{$attribute}->{'keys'}->{$key}->{'value'};
				my $static = ($$attributes{$attribute}->{'static'}) ? 'No' : 'Yes';
				$value = '<not set>' if ($value eq '');
				if ($first) {
					printf("\t%-*s     %-*s     %-*s     %-*s\n",
					  $l_attr, $attribute, $l_value, $value, 9, $static, 3, 'Yes');
					$first = FALSE;
				} else {
					printf("\t%-*s     %-*s     %-*s     %-*s\n",
					  $l_attr, '', $l_value, $value, 9, $static, 3, 'Yes');
				}

				$found++;
			}
		} elsif ($nonkey) {
			my $value = $$attributes{$attribute}->{'value'};
			my $static = ($$attributes{$attribute}->{'static'}) ? 'No' : 'Yes';
			if (($attribute eq 'trace_level') && $value) {
				foreach my $level (split(/\|/, $value)) {
					$level =~ s/^\s+//; $level =~ s/\s+$//;
					if ($first) {
						printf("\t%-*s     %-*s     %-*s     %-*s\n",
						  $l_attr, $attribute, $l_value, $level, 9, $static, 3, 'No');
						$first = FALSE;
					} else {
						printf("\t%-*s     %-*s     %-*s     %-*s\n",
						  $l_attr, '', $l_value, $level, 9, $static, 3, 'No');
					}

					$found++;
				}

				next;
			}

			next if ((ref($value) eq 'HASH') || (ref($value) eq 'ARRAY'));

			$value = '<n/a>' if (!defined($value));
			$value = '<not set>' if ($value eq '');
			printf("\t%-*s     %-*s     %-*s     %-*s\n",
			  $l_attr, $attribute, $l_value, $value, 9, $static, 3, 'No');

			$found++;
		}
	}

	if (!$found) {
		print "\t(none)\n";
	}

	if ($nonkey && defined($$attributes{'trace_level'})) {
		my $found = FALSE;
		print "\n\tPossible trace levels:\n".
		  "\t  (use trace_level=\"add <level>\", none, all or default to set):\n";

		my $count = 0;
		foreach my $entry (@{$$attributes{'trace_level'}->{'set'}}) {
			print "\t\t" if (!$count);
			print "$entry, ";
			$count++;
			if ($count == 5) {
				print "\n";
				$count = 0;
			}
		}

		print "\n";
	}

	return FALSE;
}

sub listScstAttributes {
	my $nonkey = shift;

	my ($attributes, $errorString) = $SCST->scstAttributes();

	return TRUE if issueWarning($errorString);

	if (!scalar(keys %{$attributes})) {
		print "FATAL: Unable to get a list of SCST attributes! Please make sure SCST is loaded.\n";
		return;
	}

	return listAttributes($attributes, $nonkey);
}

sub listHandlerAttributes {
	my $handler = shift;
	my $nonkey = shift;

	my ($attributes, $errorString) = $SCST->handlerAttributes($handler);

	return TRUE if issueWarning($errorString);

	if (!scalar(keys %{$attributes})) {
		print "No such handler '$handler' found.\n";
		return;
	}

	my $rc = listAttributes($attributes, $nonkey);
	return $rc if $rc;

	($attributes, $errorString) = $SCST->deviceCreateAttributes($handler);

	return TRUE if issueWarning($errorString);
	return TRUE if (!scalar keys %{$attributes});

	print "\n\tDevice CREATE attributes available\n";
	print "\t----------------------------------\n";

	foreach my $attribute (sort keys %{$attributes}) {
		print "\t$attribute\n";
	}

	return FALSE;
}

sub listDriverAttributes {
	my $driver = shift;
	my $nonkey = shift;

	my ($attributes, $errorString) = $SCST->driverAttributes($driver);

	return TRUE if issueWarning($errorString);

	my $rc = listAttributes($attributes, $nonkey);
	return $rc if ($rc);

	if ($SCST->driverIsVirtualCapable($driver)) {
		($attributes, $errorString) = $SCST->driverDynamicAttributes($driver);
		return TRUE if issueWarning($errorString);

		if (scalar keys %{$attributes}) {
			print "\n\tDynamic attributes available\n";
			print "\t----------------------------\n";

			foreach my $attribute (sort keys %{$attributes}) {
				print "\t$attribute\n";
			}
		}

		my $attributes;

		($attributes, $errorString) = $SCST->targetCreateAttributes($driver);
		return TRUE if issueWarning($errorString);
		return TRUE if (!scalar keys %{$attributes});

		print "\n\tTarget CREATE attributes available:\n";
		print "\t-----------------------------------\n";

		foreach my $attribute (sort keys %{$attributes}) {
			print "\t$attribute\n";
		}
	}

	return FALSE;
}

sub listTargetAttributes {
	my $driver = shift;
	my $target = shift;
	my $nonkey = shift;

	my ($attributes, $errorString) = $SCST->targetAttributes($driver, $target);

	return TRUE if issueWarning($errorString);

	if (!scalar(keys %{$attributes})) {
		print "No such driver/target '$driver/$target' found.\n";
		return;
	}

	my $rc = listAttributes($attributes, $nonkey);
	return $rc if $rc;

	if ($SCST->driverIsVirtualCapable($driver)) {
		($attributes, $errorString) = $SCST->targetDynamicAttributes($driver);
		return TRUE if issueWarning($errorString);

		if (scalar keys %{$attributes}) {
			print "\n\tDynamic attributes available\n";
			print "\t----------------------------\n";

			foreach my $attribute (sort keys %{$attributes}) {
				print "\t$attribute\n";
			}
		}
	}

	($attributes, $errorString) = $SCST->lunCreateAttributes($driver, $target);

	return TRUE if issueWarning($errorString);
	return TRUE if (!scalar keys %{$attributes});

	print "\n\tLUN CREATE attributes available\n";
	print "\t-------------------------------\n";

	foreach my $attribute (sort keys %{$attributes}) {
		print "\t$attribute\n";
	}

	return FALSE;
}

sub listGroupAttributes {
	my $driver = shift;
	my $target = shift;
	my $group = shift;
	my $nonkey = shift;

	my ($attributes, $errorString) = $SCST->groupAttributes($driver, $target, $group);

	return TRUE if issueWarning($errorString);

	if (!scalar(keys %{$attributes})) {
		print "No such driver/target/group '$driver/$target/$group' found.\n";
		return;
	}

	my $rc = listAttributes($attributes, $nonkey);
	return $rc if $rc;

	($attributes, $errorString) = $SCST->lunCreateAttributes($driver, $target, $group);

	return TRUE if issueWarning($errorString);
	return TRUE if (!scalar keys %{$attributes});

	print "\n\tLUN CREATE attributes available\n";
	print "\t-------------------------------\n";

	foreach my $attribute (sort keys %{$attributes}) {
		print "\t$attribute\n";
	}

	($attributes, $errorString) = $SCST->initiatorCreateAttributes($driver, $target, $group);

	return TRUE if issueWarning($errorString);
	return TRUE if (!scalar keys %{$attributes});

	print "\n\tInitiator CREATE attributes available\n";
	print "\t-------------------------------------\n";

	foreach my $attribute (keys %{$attributes}) {
		print "\t$attribute\n";
	}

	return FALSE;
}

sub listLunAttributes {
	my $driver = shift;
	my $target = shift;
	my $group = shift;
	my $lun = shift;
	my $nonkey = shift;

	my ($attributes, $errorString) = $SCST->lunAttributes($driver, $target, $lun, $group);

	return TRUE if issueWarning($errorString);

	if (!scalar(keys %{$attributes})) {
		if (valid($group)) {
			print "No such driver/target/group/lun '$driver/$target/$group/$lun' found.\n";
		} else {
			print "No such driver/target/lun '$driver/$target/$lun' found.\n";
		}
		return;
	}

	return listAttributes($attributes, $nonkey);
}

sub listInitiatorAttributes {
	my $driver = shift;
	my $target = shift;
	my $group = shift;
	my $initiator = shift;
	my $nonkey = shift;

	my ($attributes, $errorString) = $SCST->initiatorAttributes($driver, $target, $group, $initiator);

	# As if writing, initiators didn't have attributes. This will
	# allow us to support it in the future.
	if ($errorString =~ /Not a directory/) {
		print "Initiators do not (yet) have attributes.\n";
		return;
	}

	return TRUE if issueWarning($errorString);

	if (!scalar(keys %{$attributes})) {
		print "No such driver/target/group/initiator '$driver/$target/$group/$initiator' found.\n";
		return;
	}

	return listAttributes($attributes, $nonkey);
}

sub listDeviceGroupAttributes {
	my $group = shift;
	my $nonkey = shift;

	my ($attributes, $errorString) = $SCST->deviceGroupAttributes($group);

	return TRUE if issueWarning($errorString);

	# Special case - as of writing, device group attributes didn't exist.
	if (!scalar(keys %{$attributes})) {
		print "No such device group '$group' found or device group as no attributes.\n";
		return;
	}

	return listAttributes($attributes, $nonkey);
}

sub listTargetGroupAttributes {
	my $group = shift;
	my $tgroup = shift;
	my $nonkey = shift;

	my ($attributes, $errorString) = $SCST->targetGroupAttributes($group, $tgroup);

	return TRUE if issueWarning($errorString);

	if (!scalar(keys %{$attributes})) {
		print "No such device group/target group '$group/$tgroup' found.\n";
		return;
	}

	return listAttributes($attributes, $nonkey);
}

sub listTargetGroupTargetAttributes {
	my $group = shift;
	my $tgroup = shift;
	my $tgt = shift;
	my $nonkey = shift;

	my ($attributes, $errorString) = $SCST->targetGroupTargetAttributes($group, $tgroup, $tgt, TRUE);

	return TRUE if issueWarning($errorString);

	if (!scalar(keys %{$attributes})) {
		print "No such device group/target group/target '$group/$tgroup/$tgt' found.\n";
		return;
	}

	return listAttributes($attributes, $nonkey);
}

####################################################################

sub setScstAttribute {
	shift;
	shift;
	shift;
	shift;
	my $attribute = shift;
	my $value = shift;

	print "\t-> Setting SCST attribute '$attribute' to value '$value': ";
	my $rc = $SCST->setScstAttribute($attribute, $value);
	print "done.\n";

	return $rc;
}

sub setScstAttributes {
	my $attributes = shift;
	my $showset = shift;

	my $error = "\t-> WARNING: SCST lacks the settable attribute '%s', ignoring.\n\n";
	my ($_attributes, $errorString) = $SCST->scstAttributes();

	return TRUE if issueWarning($errorString);

	return setAttributes(undef, undef, undef, undef, $attributes,
	  $_attributes, $error, \&setScstAttribute, $showset);
}

sub setDeviceAttribute {
	shift;
	shift;
	shift;
	my $device = shift;
	my $attribute = shift;
	my $value = shift;

	print "\t-> Setting device attribute '$attribute' to value '$value' for device '$device': ";
	my $rc = $SCST->setDeviceAttribute($device, $attribute, $value);
	print "done.\n";

	return $rc;
}

sub setDeviceAttributes {
	my $device = shift;
	my $attributes = shift;
	my $showset = shift;

	my $error = "\t-> WARNING: Device '$device' lacks the settable ".
	  "attribute '%s', ignoring.\n\n";
	my ($_attributes, $errorString) = $SCST->deviceAttributes($device);

	return TRUE if issueWarning($errorString);

	return setAttributes(undef, undef, undef, $device, $attributes,
	  $_attributes, $error, \&setDeviceAttribute, $showset);
}

sub setHandlerAttribute {
	shift;
	shift;
	shift;
	my $handler = shift;
	my $attribute = shift;
	my $value = shift;

	print "\t-> Setting handler attribute '$attribute' to value '$value' for handler '$handler': ";
	my $rc = $SCST->setHandlerAttribute($handler, $attribute, $value);
	print "done.\n";

	return $rc;
}

sub setHandlerAttributes {
	my $handler = shift;
	my $attributes = shift;
	my $showset = shift;

	my $error = "\t-> WARNING: Handler '$handler' lacks the settable ".
	  "attribute '%s', ignoring.\n\n";
	my ($_attributes, $errorString) = $SCST->handlerAttributes($handler);

	return TRUE if issueWarning($errorString);

	return setAttributes(undef, undef, undef, $handler, $attributes,
	  $_attributes, $error, \&setHandlerAttribute, $showset);
}

sub setGroupAttribute {
	shift;
	my $driver = shift;
	my $target = shift;
	my $group = shift;
	my $attribute = shift;
	my $value = shift;

	print "\t-> Setting group attribute '$attribute' to value '$value' for group '$group': ";
	my $rc = $SCST->setGroupAttribute($driver, $target, $group, $attribute, $value);
	print "done.\n";

	return $rc;
}

sub setGroupAttributes {
	shift;
	my $driver = shift;
	my $target = shift;
	my $group = shift;
	my $attributes = shift;
	my $showset = shift;

	my $error = "\t-> WARNING: Driver/target/group '$driver/$target/$group' lacks the settable ".
	  "attribute '%s', ignoring.\n\n";
	my ($_attributes, $errorString) = $SCST->groupAttributes($driver, $target, $group);

	return TRUE if issueWarning($errorString);

	return setAttributes(undef, $driver, $target, $group, $attributes,
	  $_attributes, $error, \&setGroupAttribute, $showset);
}

sub setLunAttribute {
	my $driver = shift;
	my $target = shift;
	my $lun = shift;
	my $group = shift;
	my $attribute = shift;
	my $value = shift;

	if ($group) {
		print "\t-> Setting LUN attribute '$attribute' to value '$value' for ".
		  "driver/target/group/LUN '$driver/$target/$group/$lun': ";
	} else {
		print "\t-> Setting LUN attribute '$attribute' to value '$value' for ".
		  "driver/target/LUN '$driver/$target/$lun': ";
	}

	my $rc = $SCST->setLunAttribute($driver, $target, $lun, $attribute, $value, $group);
	print "done.\n";

	return $rc;
}

sub setLunAttributes {
	my $driver = shift;
	my $target = shift;
	my $lun = shift;
	my $attributes = shift;
	my $group = shift;
	my $showset = shift;
	my $error;

	if ($group) {
		$error = "\t-> WARNING: Driver/target/group/LUN '$driver/$target/$group/$lun' ".
		  "lacks the settable attribute '%s', ignoring.\n\n";
	} else {
		$error = "\t-> WARNING: Driver/target/LUN '$driver/$target/$lun' lacks the settable ".
		  "attribute '%s', ignoring.\n\n";
	}

	my ($_attributes, $errorString) = $SCST->lunAttributes($driver, $target, $lun, $group);

	return TRUE if issueWarning($errorString);

	return setAttributes($driver, $target, $lun, $group, $attributes,
	  $_attributes, $error, \&setLunAttribute, $showset);
}

sub setInitiatorAttribute {
	my $driver = shift;
	my $target = shift;
	my $group = shift;
	my $initiator = shift;
	my $attribute = shift;
	my $value = shift;

	print "\t-> Setting initiator attribute '$attribute' to value '$value' for ".
	  "driver/target/group/initiator '$driver/$target/$group/initiator': ";
	my $rc = $SCST->setInitiatorAttribute($driver, $target, $group,
	  $initiator, $attribute, $value);
	print "done.\n";

	return $rc;
}

sub setInitiatorAttributes {
	my $driver = shift;
	my $target = shift;
	my $group = shift;
	my $initiator = shift;
	my $attributes = shift;
	my $showset = shift;

	my ($_attributes, $errorString) = $SCST->initiatorAttributes($driver, $target, $group, $initiator);

	return TRUE if issueWarning($errorString);

	# As if writing, initiators didn't have attributes. This will
	# allow us to support it in the future.
	if ($errorString =~ /Not a directory/) {
		print "Initiators do not (yet) have attributes.\n";
		return;
	}

	my $error = "\t-> WARNING: Driver/target/group/initiator '$driver/$target/$group/$initiator' ".
	  "lacks the settable attribute '%s', ignoring.\n\n";

	return setAttributes($driver, $target, $group, $initiator, $attributes,
	  $_attributes, $error, \&setInitiatorAttribute, $showset);
}

sub setAluaAttributes {
	my $attributes = shift;
	my $showset = shift;

	my $error = "\t-> WARNING: no settable ALUA attribute '%s', ignoring.\n\n";

	my ($_attributes, $errorString) = $SCST->aluaAttributes();

	return TRUE if issueWarning($errorString);

	return setAttributes(undef, undef, undef, undef, $attributes,
	  $_attributes, $error, \&setAluaAttribute, $showset);
}

sub setAluaAttribute {
	shift;
	shift;
	shift;
	shift;
	my $attribute = shift;
	my $value = shift;

	print "\t-> Setting ALUA attribute '$attribute' to value '$value': ";
	my $rc = $SCST->setAluaAttribute($attribute, $value);
	print "done.\n";

	return $rc;
}

sub setDeviceGroupAttributes {
	my $group = shift;
	my $attributes = shift;
	my $showset = shift;

	my $error = "\t-> WARNING: Device Group '$group' lacks the settable attribute '%s', ignoring.\n\n";

	my ($_attributes, $errorString) = $SCST->deviceGroupAttributes($group);

	return TRUE if issueWarning($errorString);

	return setAttributes(undef, undef, undef, $group, $attributes,
	  $_attributes, $error, \&setDeviceGroupAttribute, $showset);
}

sub setDeviceGroupAttribute {
	shift;
	shift;
	shift;
	my $group = shift;
	my $attribute = shift;
	my $value = shift;

	print "\t-> Setting Device Group attribute '$attribute' to value '$value' for ".
	  "device group '$group': ";

	my $rc = $SCST->setDeviceGroupAttribute($group, $attribute, $value);
	print "done.\n";

	return $rc;
}

sub setTargetGroupAttributes {
	my $group = shift;
	my $tgroup = shift;
	my $attributes = shift;
	my $showset = shift;

	my $error = "\t-> WARNING: Target Group '$group/$tgroup' lacks the settable attribute '%s', ignoring.\n\n";

	my ($_attributes, $errorString) = $SCST->targetGroupAttributes($group, $tgroup);

	return TRUE if issueWarning($errorString);

	return setAttributes(undef, undef, $group, $tgroup, $attributes,
	  $_attributes, $error, \&setTargetGroupAttribute, $showset);
}

sub setTargetGroupAttribute {
	shift;
	shift;
	my $group = shift;
	my $tgroup = shift;
	my $attribute = shift;
	my $value = shift;

	print "\t-> Setting Target Group attribute '$attribute' to value '$value' for ".
	  "target group '$group/$tgroup': ";

	my $rc = $SCST->setTargetGroupAttribute($group, $tgroup, $attribute, $value);
	print "done.\n";

	return $rc;
}

sub setTargetGroupTargetAttributes {
	my $group = shift;
	my $tgroup = shift;
	my $tgt = shift;
	my $attributes = shift;
	my $showset = shift;

	my $error = "\t-> WARNING: Target '$group/$tgroup/$tgt' lacks the settable attribute '%s', ignoring.\n\n";

	my ($_attributes, $errorString) = $SCST->targetGroupTargetAttributes($group, $tgroup, $tgt, TRUE);

	return TRUE if issueWarning($errorString);

	return setAttributes(undef, $group, $tgroup, $tgt, $attributes,
	  $_attributes, $error, \&setTargetGroupTargetAttribute, $showset);
}

sub setTargetGroupTargetAttribute {
	shift;
	my $group = shift;
	my $tgroup = shift;
	my $tgt = shift;
	my $attribute = shift;
	my $value = shift;

	print "\t-> Setting target attribute '$attribute' to value '$value' for ".
	  "target '$group/$tgroup/$tgt': ";

	my $rc = $SCST->setTargetGroupTargetAttribute($group, $tgroup, $tgt, $attribute, $value);
	print "done.\n";

	return $rc;
}

# Sets any non-dynamic attributes
sub setAttributes {
	my $level1 = shift;
	my $level2 = shift;
	my $level3 = shift;
	my $level4 = shift;
	my $attributes = shift;
	my $_attributes = shift;
	my $error = shift;
	my $callback = shift;
	my $showset = shift;
	my %toset;
	my $changes = 0;

	# build caches for easier matching
	foreach my $attribute (keys %{$attributes}) {
		if (ref($$attributes{$attribute}) eq 'ARRAY') {
			foreach my $value (@{$$attributes{$attribute}}) {
				$toset{$attribute}->{$value}++;
			}
		} else {
			$toset{$attribute}->{$$attributes{$attribute}}++;
		}
	}

	my $existing = cacheAttributes($_attributes);

	foreach my $attribute (keys %toset) {
		foreach my $value (keys %{$toset{$attribute}}) {
			if (!defined($$existing{$attribute})) {
				print sprintf($error, $attribute);
				next;
			}

			# already set, move on
			if (defined($$existing{$attribute}->{$value})) {
				print "\t-> Attribute '$attribute' already set to value '$value', ignoring.\n"
				  if ($showset);
				next;
			}

			# Set the existing attribute
			my $rc = $callback->($level1, $level2, $level3, $level4, $attribute, $value);
			issueWarning($SCST->errorString($rc)) if ($rc);
			$changes++ if (!$rc);
		}
	}

	return $changes;
}

sub setDriverAttribute {
	my $driver = shift;
	my $attribute = shift;
	my $value = shift;

	if ($attribute eq 'enabled') {
		my $onoff = $value ? 'Enabling' : 'Disabling';
		print "\t-> $onoff driver '$driver': ";
	} else {
		print "\t-> Setting driver attribute '$attribute' to value '$value' for driver '$driver': ";
	}

	my $rc = $SCST->setDriverAttribute($driver, $attribute, $value);
	print "done.\n";

	return $rc;
}

sub setDriverAttributes {
	my $driver = shift;
	my $attributes = shift;
	my $deletions = shift;
	my %toset;
	my $changes = 0;

	my $driverCap = $SCST->driverIsVirtualCapable($driver);
	my ($_attributes, $errorString) = $SCST->driverAttributes($driver);

	return 0 if issueWarning($errorString);

	# build caches for easier matching
	foreach my $attribute (keys %{$attributes}) {
		if (ref($$attributes{$attribute}) eq 'ARRAY') {
			foreach my $value (@{$$attributes{$attribute}}) {
				$toset{$attribute}->{$value} = FALSE;
			}
		} else {
			$toset{$attribute}->{$$attributes{$attribute}} = FALSE;
		}
	}

	my $existing = cacheAttributes($_attributes);

	# add/change
	foreach my $attribute (keys %toset) {
		foreach my $value (keys %{$toset{$attribute}}) {
			if (!defined($$existing{$attribute}) &&
			    $driverCap && !$SCST->checkDriverDynamicAttributes($driver, $attribute)) {
				addDriverDynamicAttribute($driver, $attribute, $value);
				$changes++;
				next;
			} elsif (!defined($$existing{$attribute})) {
				print "\t-> WARNING: Driver '$driver' lacks the settable attribute ".
				  "'$attribute', ignoring.\n\n";
				next;
			}

			# already set, move on
			if (defined($$existing{$attribute}->{$value})) {
				$$existing{$attribute}->{$value} = TRUE;
				next;
			}

			# Set the existing attribute
			if ($driverCap && !$SCST->checkDriverDynamicAttributes($driver, $attribute)) {
				addDriverDynamicAttribute($driver, $attribute, $value);
				$changes++;
			} else {
				my $rc = setDriverAttribute($driver, $attribute, $value);
				issueWarning($SCST->errorString($rc)) if ($rc);
			}

			$$existing{$attribute}->{$value} = TRUE;
		}
	}

	foreach my $attribute (keys %{$existing}) {
		next if (!$driverCap || $SCST->checkDriverDynamicAttributes($driver, $attribute));

		foreach my $value (keys %{$$existing{$attribute}}) {
			if (!$$existing{$attribute}->{$value}) {
				if ($deletions) {
					removeDriverDynamicAttribute($driver, $attribute, $value);
					$changes++;
				} else {
					print "\t-> Driver dynamic attribute '$attribute' with value '$value' ".
					  "is not in configuration. Use -force to remove it.\n";
				}
			}
		}
	}

	return $changes;
}

sub addDriverDynamicAttributes {
	my $driver = shift;
	my $attributes = shift;

	my ($_attributes, $errorString) = $SCST->driverAttributes($driver);

	return TRUE if issueWarning($errorString);

	my $existing = cacheAttributes($_attributes);

	foreach my $attribute (keys %{$attributes}) {
		if (defined($$existing{$attribute}->{$$attributes{$attribute}})) {
			my $value = $$attributes{$attribute};
			print "\t-> Attribute/value '$attribute/$value' already exists for driver '$driver'.\n";
			next;
		}

		addDriverDynamicAttribute($driver, $attribute, $$attributes{$attribute});
	}

	return FALSE;
}

sub addDriverDynamicAttribute {
	my $driver = shift;
	my $attribute = shift;
	my $value = shift;

	print "\t-> Adding driver attribute '$attribute' with value '$value' for driver '$driver': ";
	my $rc = $SCST->addDriverDynamicAttribute($driver, $attribute, $value);
	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub removeDriverDynamicAttributes {
	my $driver = shift;
	my $attributes = shift;

	my ($_attributes, $errorString) = $SCST->driverAttributes($driver);

	return TRUE if issueWarning($errorString);

	my $existing = cacheAttributes($_attributes);

	foreach my $attribute (keys %{$attributes}) {
		if (!defined($$existing{$attribute}->{$$attributes{$attribute}})) {
			my $value = $$attributes{$attribute};
			print "\t-> Attribute/value '$attribute/$value' doesn't exist for driver '$driver'.\n";
			next;
		}

		removeDriverDynamicAttribute($driver, $attribute, $$attributes{$attribute});
	}

	return FALSE;
}

sub removeDriverDynamicAttribute {
	my $driver = shift;
	my $attribute = shift;
	my $value = shift;

	return TRUE if (!$SCST->driverIsVirtualCapable($driver));

	print "\t-> Removing dynamic attribute '$attribute' with value '$value' for driver '$driver': ";
	my $rc = $SCST->removeDriverDynamicAttribute($driver, $attribute, $value);
	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub setTargetAttribute {
	my $driver = shift;
	my $target = shift;
	my $attribute = shift;
	my $value = shift;

	if ($attribute eq 'enabled') {
		my $onoff = $value ? 'Enabling' : 'Disabling';
		print "\t-> $onoff driver/target '$driver/$target': ";
	} else {
		print "\t-> Setting target attribute '$attribute' to value '$value' for ".
		  "driver/target '$driver/$target': ";
	}

	my $rc = $SCST->setTargetAttribute($driver, $target, $attribute, $value);
	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub setTargetAttributes {
	my $driver = shift;
	my $target = shift;
	my $attributes = shift;
	my $deletions = shift;
	my %toset;
	my $changes = 0;

	my $driverCap = $SCST->driverIsVirtualCapable($driver);
	my ($_attributes, $errorString) = $SCST->targetAttributes($driver, $target);

	return 0 if issueWarning($errorString);

	# build caches for easier matching
	foreach my $attribute (keys %{$attributes}) {
		if (ref($$attributes{$attribute}) eq 'ARRAY') {
			foreach my $value (@{$$attributes{$attribute}}) {
				$toset{$attribute}->{$value} = FALSE;
			}
		} else {
			$toset{$attribute}->{$$attributes{$attribute}} = FALSE;
		}
	}

	my $existing = cacheAttributes($_attributes);

	# add/change
	foreach my $attribute (keys %toset) {
		foreach my $value (keys %{$toset{$attribute}}) {
			next if ($attribute eq 'HW_TARGET');
			if (!defined($$existing{$attribute}) &&
			    $driverCap && !$SCST->checkTargetDynamicAttributes($driver, $attribute)) {
				addTargetDynamicAttribute($driver, $target, $attribute, $value);
				$changes++;
				next;
			} elsif (!defined($$existing{$attribute})) {
				print "\t-> WARNING: Driver/target '$driver/$target' lacks the settable attribute ".
				  "'$attribute', ignoring.\n\n";
				next;
			}

			# already set, move on
			if (defined($$existing{$attribute}->{$value})) {
				$$existing{$attribute}->{$value} = TRUE;
				next;
			}

			# Set the existing attribute
			if ($driverCap && !$SCST->checkTargetDynamicAttributes($driver, $attribute)) {
				addTargetDynamicAttribute($driver, $target, $attribute, $value);
				$changes++;
			} else {
				my $rc = setTargetAttribute($driver, $target, $attribute, $value);
				issueWarning($SCST->errorString($rc)) if ($rc);
				$changes++ if (!$rc);
			}

			$$existing{$attribute}->{$value} = TRUE;
		}
	}

	foreach my $attribute (keys %{$existing}) {
		next if (!$driverCap || $SCST->checkTargetDynamicAttributes($driver, $attribute));

		foreach my $value (keys %{$$existing{$attribute}}) {
			if (!$$existing{$attribute}->{$value}) {
				if ($deletions) {
					removeTargetDynamicAttribute($driver, $target, $attribute, $value);
					$changes++;
				} else {
					print "\t-> Target dynamic attribute '$attribute' with value '$value' ".
					  "is not in configuration. Use -force to remove it.\n";
				}
			}
		}
	}

	return $changes;
}

sub addTargetDynamicAttributes {
	my $driver = shift;
	my $target = shift;
	my $attributes = shift;

	my ($_attributes, $errorString) = $SCST->targetAttributes($driver, $target);

	return TRUE if issueWarning($errorString);

	my $existing = cacheAttributes($_attributes);

	foreach my $attribute (keys %{$attributes}) {
		if (defined($$existing{$attribute}->{$$attributes{$attribute}})) {
			my $value = $$attributes{$attribute};
			print "\t-> Attribute/value '$attribute/$value' already exists for driver/target ".
			  "'$driver/$target'.\n";
			next;
		}

		addTargetDynamicAttribute($driver, $target, $attribute, $$attributes{$attribute});
	}

	return FALSE;
}

sub addTargetDynamicAttribute {
	my $driver = shift;
	my $target = shift;
	my $attribute = shift;
	my $value = shift;

	print "\t-> Adding target attribute '$attribute' with value '$value' ".
	  "for driver/target '$driver/$target': ";
	my $rc = $SCST->addTargetDynamicAttribute($driver, $target, $attribute, $value);
	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub removeTargetDynamicAttributes {
	my $driver = shift;
	my $target = shift;
	my $attributes = shift;

	my ($_attributes, $errorString) = $SCST->targetAttributes($driver, $target);

	return TRUE if issueWarning($errorString);

	my $existing = cacheAttributes($_attributes);

	foreach my $attribute (keys %{$attributes}) {
		if (!defined($$existing{$attribute}->{$$attributes{$attribute}})) {
			my $value = $$attributes{$attribute};
			print "\t-> Attribute/value '$attribute/$value' doesn't exist for driver/target ".
			  "'$driver/$target'.\n";
			next;
		}

		removeTargetDynamicAttribute($driver, $target, $attribute, $$attributes{$attribute});
	}

	return FALSE;
}

sub removeTargetDynamicAttribute {
	my $driver = shift;
	my $target = shift;
	my $attribute = shift;
	my $value = shift;

	return TRUE if (!$SCST->driverIsVirtualCapable($driver));

	print "\t-> Removing dynamic attribute '$attribute' with value '$value' for driver/target '$driver/$target': ";
	my $rc = $SCST->removeTargetDynamicAttribute($driver, $target, $attribute, $value);
	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

####################################################################

sub openDevice {
	my $handler = shift;
	my $device = shift;
	my $attributes = shift;

	print "\t-> Opening device '$device' using handler '$handler': ";

	my $rc = $SCST->openDevice($handler, $device, $attributes);

	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub closeDevice {
	my $handler = shift;
	my $device = shift;
	my $force = shift;

	my ($attributes, $errorString) = $SCST->deviceAttributes($device);

	if (!$force) {
		if (keys %{$$attributes{'exported'}}) {
			listExported($device, $attributes);
			immediateExit("Device '$device' still in use, aborting. ".
			  "Use -force to override.");
		}
	}

	print "\t-> Closing device '$device' using handler '$handler': ";

	my $rc = $SCST->closeDevice($handler, $device);

	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub resyncDevice {
	my $device = shift;
	my %attributes = ('resync_size', 1);

	return setDeviceAttributes($device, \%attributes);
}

####################################################################

sub addDeviceGroup {
	my $group = shift;

	print "\t-> Adding new device group '$group': ";

	my $rc = $SCST->addDeviceGroup($group);

	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub addTargetGroup {
	my $group = shift;
	my $tgroup = shift;

	print "\t-> Adding new target group '$tgroup' to device group '$group': ";

	my $rc = $SCST->addTargetGroup($group, $tgroup);

	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub addTargetGroupTarget {
	my $group = shift;
	my $tgroup = shift;
	my $tgt = shift;

	print "\t-> Adding new target group/target '$tgroup/$tgt' to device group '$group': ";

	my $rc = $SCST->addTargetGroupTarget($group, $tgroup, $tgt);

	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub removeDeviceGroup {
	my $group = shift;
	my $force = shift;
	my $errorString;

	if (!$force) {
		my $devices;
		my $tgroups;

		($devices, $errorString) = $SCST->deviceGroupDevices($group);
		($tgroups, $errorString) = $SCST->targetGroups($group);
		if (($#{$devices} > -1) || ($#{$tgroups} > -1)) {
			print "\n";
			listDeviceGroup($group);
			immediateExit("Device group is still in use, aborting. Use -force to override.");
		}
	}

	print "\t-> Removing device group '$group': ";

	my $rc = $SCST->removeDeviceGroup($group);

	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub removeTargetGroup {
	my $group = shift;
	my $tgroup = shift;
	my $force = shift;
	my $errorString;

	if (!$force) {
		my $tgts;

		($tgts, $errorString) = $SCST->targetGroupTargets($group, $tgroup);
		if ($#{$tgts} > -1) {
			print "\n";
			listTargetGroup($group, $tgroup);
			immediateExit("Target group is still in use, aborting. Use -force to override.");
		}
	}

	print "\t-> Removing target group '$tgroup' from device group '$group': ";

	my $rc = $SCST->removeTargetGroup($group, $tgroup);

	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub removeTargetGroupTarget {
	my $group = shift;
	my $tgroup = shift;
	my $tgt = shift;
	my $force = shift;

	print "\t-> Removing target group/target '$tgroup/$tgt' from device group '$group': ";

	my $rc = $SCST->removeTargetGroupTarget($group, $tgroup, $tgt);

	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub addDeviceGroupDevice {
	my $group = shift;
	my $device = shift;

	print "\t-> Adding new device group/device '$group/$device': ";

	my $rc = $SCST->addDeviceGroupDevice($group, $device);

	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub removeDeviceGroupDevice {
	my $group = shift;
	my $device = shift;
	my $force = shift;
	my $errorString;

	if (!$force) {
		my $found = FALSE;
		my $tgroups;

		($tgroups, $errorString) = $SCST->targetGroups($group);
		foreach my $tgroup (@{$tgroups}) {
			my $targets;

			($targets, $errorString) = $SCST->targetGroupTargets($group, $tgroup);
			if ($#{$targets} > -1) {
				print "\n";
				listTargetGroup($group, $tgroup);
				$found = TRUE;
			}
		}

		if ($found) {
			immediateExit("Device may still be in use, aborting. Use -force to override.");
		}
	}

	print "\t-> Removing device '$device' from target group '$group': ";

	my $rc = $SCST->removeDeviceGroupDevice($group, $device);

	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

####################################################################

sub addGroup {
	my $driver = shift;
	my $target = shift;
	my $group = shift;

	print "\t-> Adding new group '$group' to driver/target '$driver/$target': ";

	my $rc = $SCST->addGroup($driver, $target, $group);

	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub removeGroup {
	my $driver = shift;
	my $target = shift;
	my $group = shift;
	my $force = shift;
	my $errorString;

	if (!$force) {
		my $luns;
		my $initiators;

		($luns, $errorString) = $SCST->luns($driver, $target, $group);
		($initiators, $errorString) = $SCST->initiators($driver, $target, $group);
		if ((keys %{$luns}) || ($#{$initiators} > -1)) {
			listGroup($driver, $target, $group, $luns, $initiators);
			immediateExit("Group is still in use, aborting. Use -force to override.");
		}
	}

	print "\t-> Removing group '$group' from driver/target '$driver/$target': ";

	my $rc = $SCST->removeGroup($driver, $target, $group);

	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

####################################################################

sub addInitiator {
	my $driver = shift;
	my $target = shift;
	my $group = shift;
	my $initiator = shift;

	my $current = $CURRENT{'assign'}->{$driver}->{$target}->{'GROUP'};

	foreach my $group (keys %{$current}) {
		my $initiators = $$current{$group}->{'INITIATORS'};

		foreach my $init (@{$initiators}) {
			if ($init eq $initiator) {
				print "\t-> Initiator '$initiator' already belongs to group '$group' ".
				  "for driver/target '$driver/target', ignoring.\n";
				return;
			}
		}
	}

	print "\t-> Adding new initiator '$initiator' to driver/target/group ".
	  "'$driver/$target/$group': ";

	my $rc = $SCST->addInitiator($driver, $target, $group, $initiator);

	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub removeInitiator {
	my $driver = shift;
	my $target = shift;
	my $group = shift;
	my $initiator = shift;

	print "\t-> Removing initiator '$initiator' from driver/target/group ".
	  "'$driver/$target/$group': ";

	my $rc = $SCST->removeInitiator($driver, $target, $group, $initiator);

	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub moveInitiator {
	my $driver = shift;
	my $target = shift;
	my $group = shift;
	my $initiator = shift;
	my $to = shift;

	print "\t-> Moving initiator '$initiator' from group '$group' to group '$to': ";

	my $rc = $SCST->moveInitiator($driver, $target, $group, $to, $initiator);

	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub clearInitiators {
	my $driver  = shift;
	my $target = shift;
	my $group = shift;

	print "\t-> Removing all initiators driver/target/group '$driver/$target/$group': ";

	my $rc = $SCST->clearInitiators($driver, $target, $group);

	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

####################################################################

sub addLun {
	my $driver = shift;
	my $target = shift;
	my $device = shift;
	my $lun = shift;
	my $attributes = shift;
	my $group = shift;

	# Do not complain about existing copy manager LUNs.
	if ($driver eq 'copy_manager' &&
	    $SCST->lunExists($driver, $target, $lun, $group)) {
		return FALSE;
	}

	if (valid($group)) {
		print "\t-> Adding device '$device' at LUN $lun to driver/target/group ".
		  "'$driver/$target/$group': ";
	} else {
		print "\t-> Adding device '$device' at LUN $lun to driver/target ".
		  "'$driver/$target': ";
	}

	my $rc = $SCST->addLun($driver, $target, $device, $lun, $attributes, $group);

	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub removeLun {
	my $driver = shift;
	my $target = shift;
	my $lun = shift;
	my $group = shift;

	if ($group) {
		print "\t-> Removing LUN $lun from driver/target/group ".
		  "'$driver/$target/$group': ";
	} else {
		print "\t-> Removing LUN $lun from driver/target ".
		  "'$driver/$target': ";
	}

	my $rc = $SCST->removeLun($driver, $target, $lun, $group);

	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub replaceLun {
	my $driver = shift;
	my $target = shift;
	my $group = shift;
	my $lun = shift;
	my $device = shift;
	my $attributes = shift;

	print "\t-> Replacing device at LUN $lun with device '$device' ".
	  "in driver/target/group '$driver/$target/$group': ";

	my $rc = $SCST->replaceLun($driver, $target, $lun, $device, $attributes, $group);

	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub clearLuns {
	my $driver = shift;
	my $target = shift;
	my $group = shift;

	if ($group) {
		print "\t-> Removing all LUNs from driver/target/group '$driver/$target/$group': ";
	} else {
		print "\t-> Removing all LUNs from driver/target '$driver/$target': ";
	}

	my $rc = $SCST->clearLuns($driver, $target, $group);

	print "done.\n";

	condExit($SCST->errorString($rc));

	return FALSE;
}

sub clearDriverDynamicAttributes {
	my $driver = shift;
	my $errorString;

	return TRUE if (!$SCST->driverIsVirtualCapable($driver));

	print "\t-> Removing all dynamic attributes from driver '$driver': ";

	my $attributes;
	my $dynamic;

	($attributes, $errorString) = $SCST->driverAttributes($driver);
	($dynamic, $errorString) = $SCST->driverDynamicAttributes($driver);
	foreach my $attribute (keys %{$attributes}) {
		if (defined($$dynamic{$attribute})) {
			if (defined($$attributes{$attribute}->{'keys'})) {
				foreach my $key (keys %{$$attributes{$attribute}->{'keys'}}) {
					my $value = $$attributes{$attribute}->{'keys'}->{$key}->{'value'};
					my $rc = $SCST->removeDriverDynamicAttribute($driver, $attribute, $value);

					condExit($SCST->errorString($rc));
				}
			}
		}
	}

	print "done.\n";

	return FALSE;
}

sub clearTargetDynamicAttributes {
	my $driver = shift;
	my $target = shift;
	my $errorString;

	return TRUE if (!$SCST->driverIsVirtualCapable($driver));

	print "\t-> Removing all dynamic attributes from driver/target '$driver/$target': ";

	my $attributes;
	my $dynamic;

	($attributes, $errorString) = $SCST->targetAttributes($driver, $target);
	($dynamic, $errorString) = $SCST->targetDynamicAttributes($driver);
	foreach my $attribute (keys %{$attributes}) {
		if (defined($$dynamic{$attribute})) {
			if (defined($$attributes{$attribute}->{'keys'})) {
				foreach my $key (keys %{$$attributes{$attribute}->{'keys'}}) {
					my $value = $$attributes{$attribute}->{'keys'}->{$key}->{'value'};
					my $rc = $SCST->removeTargetDynamicAttribute($driver, $target, $attribute, $value);

					condExit($SCST->errorString($rc));
				}
			}
		}
	}

	print "done.\n";

	return FALSE;
}

####################################################################

sub enableTarget {
	my $driver = shift;
	my $target = shift;
	my %attributes = ('enabled', 1);

	setTargetAttributes($driver, $target, \%attributes);

	return FALSE;
}

sub disableTarget {
	my $driver = shift;
	my $target = shift;
	my %attributes = ('enabled', 0);

	setTargetAttributes($driver, $target, \%attributes);

	return FALSE;
}

sub enableDriver {
	my $driver = shift;
	my %attributes = ('enabled', 1);

	my ($attrs, $errorString) = $SCST->driverAttributes($driver);
	return TRUE if (!defined($$attrs{'enabled'}));

	return setDriverAttributes($driver, \%attributes);
}

sub disableDriver {
	my $driver = shift;
	my %attributes = ('enabled', 0);

	my ($attrs, $errorString) = $SCST->driverAttributes($driver);
	return TRUE if (!defined($$attrs{'enabled'}));

	return setDriverAttributes($driver, \%attributes);
}

sub issueLip {
	my $driver = shift;
	my $target = shift;
	my $warn = shift;
	my $errorString;

	if (valid($driver, $target)) {
		return _issueLip($driver, $target, $warn);
	} else {
		my $drivers;

		($drivers, $errorString) = $SCST->drivers();
		foreach my $driver(@{$drivers}) {
			my $targets;

			($targets, $errorString) = $SCST->targets($driver);
			foreach my $target (@{$targets}) {
				my $rc = _issueLip($driver, $target, $warn);

				return $rc if ($rc);
			}
		}
	}

	return FALSE;
}

sub _issueLip {
	my $driver = shift;
	my $target = shift;
	my $warn = shift;
	my $rc = FALSE;

	my ($attributes, $errorString) = $SCST->targetAttributes($driver, $target);

	my $dir = new IO::Handle;

	my $host = $$attributes{'host'}->{'value'};
	my $ldir = $SCST->SCST_TARGETS_DIR."/$driver/$target/";

	if (!(opendir $dir, $ldir)) {
		$ldir = $SCST->SCST_TARGETS_DIR."/$driver/$target/";
		if (!(opendir $dir, $ldir)) {
			print "\t-> Driver/target is not a fibre channel target, ignoring.\n";
			return FALSE;
		}
	}

	my $lip = $ldir.'/issue_lip';

	if (-w $lip) {
		my $io = new IO::File $lip, O_WRONLY;

		print "WARNING: Failed to open file '$lip' for writing.\n"
		  if (!$io);

		print "\t-> Issuing LIP on fibre channel driver/target '$driver/$target' ($host): ";

		my $bytes = syswrite($io, 1, 1);

		print "done.\n";

		if (!$bytes) {
			print "WARNING: Failed to issue LIP on driver/target '$driver/$target'.\n";
			$rc = TRUE;
		}

		close $io;
	} else {
		print "Fibre channel driver/target '$driver/$target' lacks the ability to ".
		  "issue LIPs, ignoring.\n";
	}

	close $dir;

	return $rc;
}

####################################################################

sub readConfigFile {
	my $buffer;
	my @stanza;
	my $level;

	my $io = new IO::File $CONFIGFILE, O_RDONLY;

	immediateExit("Unable to open configuration file '$CONFIGFILE': $!")
	  if (!$io);

	while (my $line = <$io>) {
		$line =~ s/^\#.*//;
		$line =~ s/[^\\]\#.*//;
		if ($line =~ /\[(.*)\s+.*\]/) {
			my $parm = $1;

			if (($parm eq 'HANDLER') || ($parm eq 'GROUP') ||
			    ($parm eq 'ASSIGNMENT')) {
				print "\nNOTE: Using a deprecated configuration file. ".
				  "I will attempt to convert it for you.\n\n";

				return readOldConfigFile();
			}
		}

		$line =~ s/\\(.)/$1/g;
		$buffer .= $line;
	}

	my @buff_a;
	@buff_a = split(//, $buffer);

	$CONFIG = parseStanza(\@buff_a);

	return FALSE;
}

sub parseStanza {
	my $buffer = shift;
	my $line;
	my %hash;
	my $attribute;
	my $value;
	my $value2;
	my $quoted;

	while ($#{$buffer} > -1) {
		my $char = shift @{$buffer};

		if ($char eq '{') {
			my $child = parseStanza($buffer);

			if ($line) {
				parseLine($line, \%hash, $child);
				$line = undef;
			}

			next;
		}

		return \%hash if ($char eq '}');

		if ($char eq "\n") {
			my %empty;

			if ($line) {
				parseLine($line, \%hash, \%empty);
				$line = undef;
			}
		} else {
			$line .= $char;
		}
	}

	return \%hash;
}

sub parseLine {
	my $line = shift;
	my $hash = shift;
	my $child = shift;

	return if ($line =~ /^\s*$/);

	$line =~ s/^\s+//; $line =~ s/\s+$//;

	my @elements;
	while ($line =~ m/"([^"\\]*(\\.[^"\\]*)*)"|([^\s]+)/g) {
		push @elements, defined($1) ? $1:$3;
	}

	my $attribute = $elements[0];
	my $value     = $elements[1];
	my $value2    = $elements[2];

	if (defined($attribute) && defined($value) && defined($value2)) {
		$$hash{$attribute}->{$value}->{$value2} = $child;
	} elsif (defined($attribute) && defined($value)) {
		$$hash{$attribute}->{$value} = $child;
	} elsif (defined($attribute)) {
		$$hash{$attribute} = $child;
	}
}

sub readOldConfigFile {
	my $ignoreError = shift;
	my %config;
	my $section;
	my $last_section;
	my $arg;
	my $last_arg;
	my %empty;

	my $io = new IO::File $CONFIGFILE, O_RDONLY;

	if (!$io) {
		return undef if ($ignoreError);

		die("FATAL: Unable to open specified configuration file 'CONFIGFILE': $!\n");
	}

	while (my $line = <$io>) {
		($line, undef) = split(/\#/, $line, 2);
		$line =~ s/^\s+//; $line =~ s/\s+$//;

		if ($line =~ /^\[(.*)\]$/) {
			($section, $arg) = split(/\s+/, $1, 2);

			$arg = 'default' if ($section eq 'OPTIONS');

			if ($last_arg && ($last_arg ne $arg) &&
			    !defined($config{$last_section}->{$last_arg})) {
				$config{$last_section}->{$last_arg} = \%empty;
			}

			$last_arg = $arg;
			$last_section = $section;
		} elsif ($section && $arg && $line) {
			my($attribute, $value) = split(/\s+/, $line, 2);

			if ($section eq 'OPTIONS') {
				$value = TRUE if (($value == 1) ||
						  ($value =~ /^TRUE$/i) ||
						  ($value =~ /^YES$/i));
				$value = FALSE if (($value == 0) ||
						   ($value =~ /^FALSE$/i) ||
						   ($value =~ /^NO$/i));
			}

			push @{$config{$section}->{$arg}->{$attribute}}, $value;
		}
	}

	close $io;

	# Convert to our new format
	my %new;

	my %o_converts = ('WRITE_THROUGH' => 'write_through',
			  'WT'            => 'write_through',
			  'READ_ONLY'     => 'read_only',
			  'RO'            => 'read_only',
			  'NV_CACHE'      => 'nv_cache',
			  'NV'            => 'nv_cache',
			  'REMOVABLE'     => 'removable',
			  'RM'            => 'removable');

	foreach my $handler (keys %{$config{'HANDLER'}}) {
		foreach my $device (@{$config{'HANDLER'}->{$handler}->{'DEVICE'}}) {
			my($device, $path, $options, $bsize, $t10) = split(/\,/, $device);

			my $_handler = $handler;

			foreach my $option (split(/\|/, $options)) {
				if (($option eq 'NULLIO') || ($option eq 'NIO')) {
					$_handler = 'vdisk_nullio' if ($_handler eq 'vdisk');
				} elsif (($option eq 'BLOCKIO') || ($option eq 'BIO')) {
					$_handler = 'vdisk_blockio' if ($_handler eq 'vdisk');
				}
			}

			if ($_handler eq 'vdisk') {
				$_handler = 'vdisk_fileio';
			}

			foreach my $option (split(/\|/, $options)) {
				if (defined($o_converts{$option})) {
					%{$new{'HANDLER'}->{$_handler}->{'DEVICE'}->{$device}->{$o_converts{$option}}->{'1'}} = ();
				}
			}

			%{$new{'HANDLER'}->{$_handler}->{'DEVICE'}->{$device}->{'t10_dev_id'}->{$t10}} = ()
			  if ($t10);
			%{$new{'HANDLER'}->{$_handler}->{'DEVICE'}->{$device}->{'filename'}->{$path}} = ()
			  if ($path);
			%{$new{'HANDLER'}->{$_handler}->{'DEVICE'}->{$device}->{'blocksize'}->{$bsize}} = ()
			  if ($bsize);
		}
	}

	my ($drivers, $errorString) = $SCST->drivers();
	my %added_targets;

	# Handle default groups
	foreach my $group (keys %{$config{'ASSIGNMENT'}}) {
		next if ($group !~ /^Default/);

		if ($group eq 'Default') { # Add to all targets
			foreach my $device (@{$config{'ASSIGNMENT'}->{$group}->{'DEVICE'}}) {
				my($device, $lun) = split(/\,/, $device);

				foreach my $driver (@{$drivers}) {
					my $targets;

					($targets, $errorString) = $SCST->targets($driver);
					foreach my $target (@{$targets}) {
						$new{'TARGET_DRIVER'}->{$driver}->{'TARGET'}->{$target}->{'LUN'}->{$lun}->{$device} = {};
					}
				}
			}
		} else {
			my $group_t = $group;
			$group_t =~ s/^Default\_//;
			my $found_t = FALSE;
			# Find the associated target
			foreach my $driver (@{$drivers}) {
				my $targets;

				($targets, $errorString) = $SCST->targets($driver);
				foreach my $target (@{$targets}) {
					if ($target eq $group_t) {
						foreach my $device (@{$config{'ASSIGNMENT'}->{$group}->{'DEVICE'}}) {
							my($device, $lun) = split(/\,/, $device);
							$new{'TARGET_DRIVER'}->{$driver}->{'TARGET'}->{$target}->{'LUN'}->{$lun}->{$device} = {};
						}

						$found_t = TRUE;
					}
				}
			}

			if (!$found_t) {
				print "NOTE: Unable to find target $group. I will add this target to ".
				  "all drivers capable of creating targets.\n";

				foreach my $driver (@{$drivers}) {
					if ($SCST->driverIsVirtualCapable($driver)) {
						foreach my $device (@{$config{'ASSIGNMENT'}->{$group}->{'DEVICE'}}) {
							my($device, $lun) = split(/\,/, $device);
							$new{'TARGET_DRIVER'}->{$driver}->{'TARGET'}->{$group_t}->{'LUN'}->{$lun}->{$device} = {};
							$added_targets{$driver}->{$group_t} = TRUE;
						}
					}
				}
			}
		}
	}

	my $has_enabled = FALSE;
	foreach my $wwn (@{$config{'TARGETS'}->{'enable'}->{'HOST'}}) {
		my $target = formatTarget($wwn);
		my $driver = findTargetDriver($target);

		if ($driver) {
			%{$new{'TARGET_DRIVER'}->{$driver}->{'TARGET'}->{$target}->{'enabled'}->{'1'}} = ();
			addAllGroupsToTarget(\%config, \%new, $driver, $target);
			$has_enabled = TRUE;
		} else {
			condExit("Unable to determine target driver information for target '$wwn'. ".
			  "Please ensure this target driver is loaded.");
		}
	}

	if (!$has_enabled) {
		print "NOTE: No targets set to 'enable' within your configuration file. Please be sure to ".
		  "save write your configuration with -write_config and review it carefully.\n\n";

		# Fill in with known targets, all disabled.
		foreach my $driver (@{$drivers}) {
			my $targets;

			($targets, $errorString) = $SCST->targets($driver);
			foreach my $target (@{$targets}) {
				addAllGroupsToTarget(\%config, \%new, $driver, $target);
			}
		}

		# As well for any created targets
		foreach my $driver (keys %added_targets) {
			foreach my $target (keys %{$added_targets{$driver}}) {
				addAllGroupsToTarget(\%config, \%new, $driver, $target);
			}
		}
	}

	# Fix drivers 'enabled' attributes
	foreach my $driver (keys %{$new{'TARGET_DRIVER'}}) {
		next if ($driver =~ /^qla/);

		my $attributes;

		($attributes, $errorString) = $SCST->driverAttributes($driver);
		if (defined($$attributes{'enabled'})) {
			$new{'TARGET_DRIVER'}->{$driver}->{'enabled'}->{'1'} = {};
		}

		foreach my $target (keys %{$new{'TARGET_DRIVER'}->{$driver}->{'TARGET'}}) {
			next if (defined($new{'TARGET_DRIVER'}->{$driver}->{'TARGET'}->{'enabled'}));

			$new{'TARGET_DRIVER'}->{$driver}->{'TARGET'}->{$target}->{'enabled'}->{'1'} = {};
		}
	}

	$CONFIG = \%new;
}

sub addAllGroupsToTarget {
	my $config = shift;
	my $new = shift;
	my $driver = shift;
	my $target = shift;

	foreach my $group (keys %{$$config{'GROUP'}}) {
		if (defined($$config{'GROUP'}->{$group}->{'USER'})) {
			%{$$new{'TARGET_DRIVER'}->{$driver}->{'TARGET'}->{$target}->{'GROUP'}->{$group}} = ();

			foreach my $user (@{$$config{'GROUP'}->{$group}->{'USER'}}) {
				%{$$new{'TARGET_DRIVER'}->{$driver}->{'TARGET'}->{$target}->{'GROUP'}->{$group}->{'INITIATOR'}->{$user}} = ();
			}
		}
	}

	foreach my $group (keys %{$$config{'ASSIGNMENT'}}) {
		next if ($group =~ /^Default/);

		foreach my $device (@{$$config{'ASSIGNMENT'}->{$group}->{'DEVICE'}}) {
			my($device, $lun) = split(/\,/, $device);
			%{$$new{'TARGET_DRIVER'}->{$driver}->{'TARGET'}->{$target}->{'GROUP'}->{$group}->{'LUN'}->{$lun}->{$device}} = ();
		}
	}

	return FALSE;
}

sub findTargetDriver {
	my $target = shift;

	foreach my $driver (keys %{$CURRENT{'assign'}}) {
		foreach my $_target (keys %{$CURRENT{'assign'}->{$driver}}) {
			$_target =~ tr/A-Z/a-z/;

			return $driver if ($_target eq $target);
		}
	}

	return undef;
}

sub formatTarget {
	my $target = shift;

	if ($target =~ /^0x/) {
		$target =~ s/^0x//;
		my($o1, $o2, $o3, $o4, $o5, $o6, $o7, $o8) = unpack("A2A2A2A2A2A2A2A2", $target);
		$target = "$o1:$o2:$o3:$o4:$o5:$o6:$o7:$o8";
	}

	$target =~ tr/A-Z/a-z/;

	return $target;
}

####################################################################

sub handlerHasDevice {
	my $handler = shift;
	my $device = shift;

	return FALSE if (!defined($CURRENT{'handler'}->{$handler}));

	foreach my $_device (@{$CURRENT{'handler'}->{$handler}}) {
		return TRUE if ($_device eq $device);
	}

	return FALSE;
}

sub deviceGroupHasDevice {
	my $group = shift;
	my $device = shift;

	return FALSE if (!defined($CURRENT{'dgroups'}->{$group}));

	foreach my $_device (@{$CURRENT{'dgroups'}->{$group}->{'devices'}}) {
		return TRUE if ($_device eq $device);
	}

	return FALSE;
}

sub arrayHasValue {
	my $array = shift;
	my $value = shift;

	foreach my $item (@{$array}) {
		return TRUE if ($item eq $value);
	}

	return FALSE;
}

sub configToAttr {
	my $config = shift;
	my %attributes = ( );

	foreach my $attr (keys %{$config}) {
		if (!scalar keys %{$$config{$attr}}) {
				$attributes{$attr} = '';
		} elsif ((keys %{$$config{$attr}}) > 1) {
			foreach my $value (keys %{$$config{$attr}}) {
				push @{$attributes{$attr}}, $value;
			}
		} else {
			foreach my $value (keys %{$$config{$attr}}) {
				if (keys %{$$config{$attr}->{$value}}) {
					immediateExit("Invalid configuration encountered. ".
					  "Attribute '$attr' has an invalid value.");
				}

				$attributes{$attr} = $value;
			}
		}
	}

	return \%attributes;
}

sub cacheAttributes {
	my $attributes = shift;
	my %cache;

	foreach my $attribute (keys %{$attributes}) {
		next if ($$attributes{$attribute}->{'static'});

		if (defined($$attributes{$attribute}->{'keys'})) {
			foreach my $key (keys %{$$attributes{$attribute}->{'keys'}}) {
				my $value = $$attributes{$attribute}->{'keys'}->{$key}->{'value'};
				$cache{$attribute}->{$value} = FALSE;
			}
		} else {
			my $value = $$attributes{$attribute}->{'value'};
			# Write-only attributes (e.g. abort_isp) do not have
			# a value.
			$value = "" if (!defined($value));
			$cache{$attribute}->{$value} = FALSE;
		}
	}

	return \%cache;
}

sub numerically {
	$a <=> $b;
}

####################################################################

# If we have an unread error from SCST, exit immediately
sub immediateExit {
	my $error = shift;

	return FALSE if (!$error);

	print "\n\nFATAL: Received the following error:\n\n\t";
	print "$error\n\n";

	exit 1;
}

# If an error occurred, exit if -cont_on_err has not been specified.
sub condExit {
	my $error = shift;

	if (!$error) {
		;
	} elsif ($_CONT_ON_ERR_) {
		print "$error\n";
	} else {
		immediateExit($error);
	}
}

sub issueWarning {
	my $error = shift;

	return FALSE if (!$error);

	print "\n\nWARNING: Received the following error:\n\n\t";
	print "$error\n\n";

	return TRUE;
}

sub prompt {
	return FALSE if ($_NOPROMPT_);

	print "Performing this action may result in lost or corrupt data, ".
	  "are you sure you wish to continue (y/[n]) ? ";
	my $answer = <STDIN>;

	if (defined($answer) &&
	    (($answer =~ /^y$/i) || ($answer =~ /^yes$/i))) {
		return FALSE;
	}

	print "Aborting action.\n";

	return TRUE;
}

# Hey! Stop that!
sub commitSuicide {
	print "\n\nAborting immediately.\n";
	exit 1;
}

# Local Variables:
# mode: perl
# perl-indent-level: 8
# indent-tabs-mode: t
# End: