
man_MANS = \
	scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 \
	scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_compare_and_write.8 \
	sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_lba_status.8 \
	sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 \
	sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 \
	sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 \
	sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 \
	sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 \
	sg_sat_identify.8 sg_sat_phy_event.8 sg_sat_read_gplog.8 \
	sg_sat_set_features.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 \
	sg_start.8 sg_stpg.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 \
	sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 \
	sg_write_same.8 sg_write_verify.8 sg_zone.8
CLEANFILES =

if OS_LINUX
man_MANS += \
	rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 \
	sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 \
	sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8
CLEANFILES += sg_scan.8
sg_scan.8: sg_scan.8.linux
	cp -p $< $@
endif


if OS_WIN32_MINGW
man_MANS += sg_scan.8
CLEANFILES += sg_scan.8
sg_scan.8: sg_scan.8.win32
	cp -p $< $@
endif

if OS_WIN32_CYGWIN
man_MANS += sg_scan.8
CLEANFILES += sg_scan.8
sg_scan.8: sg_scan.8.win32
	cp -p $< $@
endif