-------------------------------------------------------------------
Thu Jan 23 15:00:00 EST 2014 - dgilbert@interlog.com

- import Suse build files into sg3_utils in the suse directory
  * change suse spec file to be patch-less
  * henceforth see ChangeLog in main directory

-------------------------------------------------------------------
Thu Jan 23 08:57:56 CET 2014 - hare@suse.de

- Update to inofficial release 1.38r546
  * sg_ses: error and warning message cleanup
    - fix --data=- problem with large buffers
    - new --data=@FN to read hex data from file FN
    - add --maxlen= option
  * sg_inq:
    - add LU_CONG to standard inquiry response
    - sync version descriptors dated 20131126
    - fix overflow in encode_whitespaces
  * sg_vpd: add LU_CONG to standard inquiry response output
    - decode Third Party Copy (tpc) page
  * sg_persist: add PROUT: Replace Lost Reservation (spc4r36)
  * sg_readcap: for --16 show physical block size if
  * sg_xcopy:
    - environment variables: XCOPY_TO_SRC and
      XCOPY_TO_DST indicate where xcopy command is sent
    - change default to send xcopy to dst (was src)
    - improve CL handling of short options (e.g. '-vv')
  * sg_write_same: repeat if unit attention
  * sg_rtpg: fix indexing bug with --extended option
  * sg_lib_data: sync asc/ascq codes with T10 dated 20131110
  * sg_cmds_extra: fix sa bug in sg_ll_3party_copy_out()
- Update tarball to 1.38b7r537
- Add sg3_utils-1.38r546.patch

-------------------------------------------------------------------
Mon Nov  4 01:59:38 UTC 2013 - jengelh@inai.de

- Update to new upstream release 1.37
* sg_compare_and_write: add --quiet option to suppress miscompare
  report
* sg_persist: fix core dump on -Q option
* sg_unmap: fix core dump on -g option
* sg_ses: add --nickname and --nickid options
- Remove sg3_utils-Fixup-T10-Vendor-designator-display.patch
  (merged upstream)

-------------------------------------------------------------------
Sun Aug 25 18:45:14 CEST 2013 - ohering@suse.de

- Fixup T10 Vendor designator display (bnc#805059)
  sg3_utils-Fixup-T10-Vendor-designator-display.patch
- In rescan-scsi-bus.sh, check if the HBA driver exports issue_lip
  in sysfs before using it (bnc#780946)
  sg3_utils-check-if-hba-supports-issue-lip.patch

-------------------------------------------------------------------
Thu Jun 13 14:15:26 UTC 2013 - jengelh@inai.de

- Implement shlib packaging guidelines; rename sg3_utils-devel
  to libsgutils-devel (upstream recommendation)
- More robust make install call; remove redundant %clean section;
  simplify file lists

-------------------------------------------------------------------
Tue Jun 11 08:56:39 UTC 2013 - rmilasan@suse.com

- Update to version 1.36
  - sg_vpd: Protocol-specific port information VPD page
    for SAS SSP, persistent connection (spl3r2), power
    disable (spl3r3)
    - block device characteristics: add FUAB bit
  - sg_xcopy: handle more descriptor types; handle zero
    maximum segment length; allow list IDs to be disabled;
    improve skip/seek handling; allow xcopy on destination
  - sg_reset: and --no-esc option to stop reset escalation
    - clean up cli, add long option names
  - sg_luns: add --test=ALUN option for decoding LUNs
    - decoded luns output in decimal or hex (if -HH given)
    - add '--linux' option to show Linux LUN after T10
      representation, can map one to the other
  - sg_inq: add --vendor option to show standard inquiry's
    vendor specific fields in ASCII
    - take resid into account with response output
  - sg_sync: add --16 (for 16 byte command) and --timeout=
  - sg_logs: add data compression page (ssc4)
  - sg_sat_set_features: increase --lba from 1 to 4 bytes
  - sg_write_same: add --ndob option (sbc3r35d)
  - sg_map: mark as deprecated
  - sginfo: mark as deprecated, especially -l (list)
  - sg_lib: improve snprintf handling
  - sg_lib_data: sync asc/ascq codes with T10 20130117
  - sg_cmds (lib): if noisy given, give more UA info
  - make code more C++ friendly

-------------------------------------------------------------------
Tue Mar 12 09:13:45 CET 2013 - hare@suse.de

- Update to version 1.35
  - sg_compare_and_write: new utility
  - sg_inq+sg_vpd: block device characteristics VPD page:
    add product_type, WABEREQ, WACEREQ and VBULS fields
  - sg_inq: more --export option changes for udev
  - sg_vpd: add more rdac vendor specific vpd pages
  - sg_verify: add --ebytchk option for sbc3r34 changes
  - sg_stpg: --offline option: fix 'Invalid state 0xe'
  - sg_ses: Door Lock element changed to Door element and
    abbreviation changed from 'dl' to 'do' (ses3r05)
  - archive/rescan-scsi-bus.sh: upgrade to version 1.53hr
    - move rescan-scsi-bus.sh to scripts directory
  - sync to sbc3r34
  - sg_lib: sg_ll_verify10+16 expand BYTCHK to 2 bit field
  - sg_pt_win32, sg_scan(win32): changes for cygwin 1.7.17
  - clean up man page summary lines
  - sg_xcopy: new dd like utility for extended copy command
  - sg_copy_results: new utility for receive copy results
  - sg_verify: add 16 byte cdb, bytchk (data-out buffer)
    and group number support
  - sync to spc4r36 and sbc3r32
  - sg_inq: add --export so sg_inq can replace udev's scsi_id
    - decode old EMC Symmetrix abuse of VPD page 0x83
  - sg_vpd: decode old EMC Symmetrix abuse of VPD page 0x83
  - sg_ses: increase max dpage response size to 64 KB
    - allow ident,locate on enclosure controller
    - more sanity for additional element status descriptor
  - sg_sanitize: add --ause, --fail and --test=
  - sg_luns: add long extended flat space addressing format
  - sg_logs: add ATA pass-through results lpage (SAT-2)
  - sg_rtpg: add --extended option
  - sg_senddiag: list rebuild assist diag page name
  - sg_pt_linux: expand DID_ (host_byte) codes
    - cope with a transport error plus sense data
    - prefer major() over MAJOR() macro
  - sg_lib: fix sg_get_command_name() service actions
    - report sdat_ovfl bit (if set) in sense data
    - decode extended_copy and receive_copy service actions
    - decode read_buffer and write_buffer modes
    - decode ATA PT fixed format sense (SAT-2)
  - sg_cmds_extra: add sg_ll_report_tgt_prt_grp2()
  - ./configure options:
    - change --enable-no-linux-bsg to --disable-linuxbsg
    - add --disable-scsistrings to reduce utility sizes

-------------------------------------------------------------------
Wed Jul  4 07:01:46 UTC 2012 - cfarrell@suse.com

- license update: GPL-2.0+ and BSD-3-Clause
  Show aggregation and make compatible with Fedora declaration

-------------------------------------------------------------------
Sun Apr 22 11:50:44 UTC 2012 - puzel@suse.com

- Update to version 1.33
  - sg_ses: major rework of indexes (again), now two level
  - sg_write_buffer: new --specific option for mode specific
    field; new mode 13 (spc4r32)
  - sg_vpd: add hp3par volume info vendor VPD page
    - fix 'scsi ports' [0x88] page problem
    - add 'sinq' pseudo page for standard inquiry response
    - add power consumption page
  - sg_format: add --poll= option for request sense polling
    - improve handling of disks > 2 TB and DIF (protection)
  - sg_logs: LB provision lpage extra (sbc3r28)
  - sg_modes: application tag mpage subcode 0xf0->0x2
  - sg_write_same: no prot fields when wrprotect=0
  - sg_get_lba_status: reflect change in sbc3r25 to Parameter
    Data Length response field (offset reduced from 8 to 4)
  - sg_inq, sg_vpd: sync with spc4r33
  - win32: change DataBufferOffset type per MSDN; caused
    problem with 64 bit machines (with buffered interface)
  - sg_luns: tweak documentation for vendor specific reports
  - add man pages for scsi_loging_level, scsi_mandat,
    scsi_satl and scsi_temperature

-------------------------------------------------------------------
Mon Jan 16 19:59:42 UTC 2012 - tabraham@novell.com

- Update to version 1.32
  + sg_sanitize: new utility for command added in sb3r27
  + sg_sat_identify: add '--ident' to output WWN
  + sg_ses: major rework of descriptor output
    + add --index, --descriptor, --join, --clear, --get, and --set
      options
  + sg_raw: exit status corrections
  + sg_decode_sense: add --nospace and --hex options
  + sg_logs: fix bug with large --maxlen
    + zero response length when resid implies it is invalid
    + add scope field to lb provisioning lpage (sb3r27)
  + sg_inq: sync version descriptors with spc4r31
  + sb_lib_data: sync asc/ascq codes with spc4r31
  + sg_vpd: add LBPRZ field in LP provisioning VPD page
  + sg_format: allow format of pdt 7 (some MO drives)
  + sg_cmd_basic: sg_cmds_process_resp() handle status good
    with a sense key other than no_sense (e.g. completed)
  + add README.iscsi

- Updated rescan-scsi-bus.sh to v1.56

-------------------------------------------------------------------
Thu Mar 10 08:47:43 UTC 2011 - coolo@novell.com

- fix file list

-------------------------------------------------------------------
Fri Feb 18 16:41:32 CET 2011 - hare@suse.de

- Update to version 1.31:
  + sg_decode_sense: new utility to decode sense data
  + sg_vpd: LB provisioning + Block limits pages (sbc3r26)
  + sync asc/ascq and version descriptors with spc4r28
  + sg_get_config, sg_rmsn, sg_verify: add --readonly option
  + sg_lib: implement forwarded sense data descriptor
    - decode user data segment referral sense data descriptor
  + sg_lib, sg_turs, sg_format: more precision for progress
    indication (two places after decimal point)
  + sg_lib(win32): add runtime selection of SPT direct or
    indirect interface
    - sg_read_buffer+sg_write_buffer: set SPT direct
 + add examples/forwarded_sense.txt + examples/ref_sense.txt

- Changes from version 1.30:
  + sg_referrals: new utility for REPORT REFERRALS
  + sbc3r25 renames 'thin' provisioning' to 'logical block
    provisioning': changes in sg_format, sg_inq, sg_logs,
    sg_modes, sg_readcap, sg_vpd
  + sg_inq: update version descriptor list to spc4r27
    - extended inquiry vpd page add extended self test
      completion minutes field
  + sg_lib: sync asc/ascq list to spc4r27
    - dStrHex(): trim excess trailing spaces
  + sg_read_long: add --readonly option (open() is rw)
  + sg_raw: add --readonly option (open() is rw)
    - allow bidirectional commands
  + sg_vpd: rdac vendor page [0xc8] parse corrections
    - extended inquiry vpd page add extended self test
    -completion minutes field
  + sg_ses: expand --data (in) buffer to 2048 bytes
  + sg_opcodes: add extended parameter data for TMFs (spc4r26)
  + sg_dd: clean count calculation, document nocache flag
    - treat bsg devices as implicit sg_io
  + sg_write_same: if READ CAPACITY(16) fails try 10 byte variant
    - anticipate approval of proposal to allow UNMAP and ANCHOR
      bits to be set on WRITE SAME(10) with '--10' option
  + sg3_utils man page: sections added for OS device names

-------------------------------------------------------------------
Fri Aug 13 11:42:50 CEST 2010 - dimstar@opensuse.org

- Update to version 1.29:
  + sg_rtpg: new logical block dependent state and bit (spc4r23)
  + sg_start: add '--readonly' option for ATA disks
  + sg_lib: update asc/ascq list to spc4r23
  + sg_inq: update version descriptor list to spc4r23
  + sg_vpd: block device characteristics page: fix form factor
    - update Extended Inquiry VPD page to spc4r23
    - update Block Limits VPD page to sbc3r22
    - update Thin Provisioning VPD page to sbc3r22
    - Automation device serial number and Data transfer device
      element VPD pages (ssc4r01)
    - add Referrals VPD page (sbc3r22)
  + sg_logs: add thin provisioning and solid state media log pages
    - addition of IBM LTO specific log pages
  + sg_modes: new page names from ssc4r01
  + sg_ses: sync with ses3r02 (SAS-2.1 connector types)
  + sg_unmap: add '--anchor' option (sbc3r22)
  + sg_write_same: add '--anchor' option (sbc3r22)
  + sg_pt interface: add set_scsi_pt_flags() to permit passing
    through SCSI_PT_FLAGS_QUEUE_AT_TAIL and AT_HEAD flags
  + add examples/sg_queue_tst+bsg_queue_tst for SG_FLAG_Q_AT_TAIL
  + add AM_MAINTAINER_MODE to configure.ac to lessen build issues
  + add BSD_LICENSE file to this and lib directories, refer to
    it from source and header files. Some source has GPL license
- Changes from version 1.28:
  + sg_unmap: new utility for thin provisioning
    - add examples/sg_unmap_example.txt
  + sg_get_lba_status: new utility for thin provisioning
  + sg_read_block_limits: new utility for tape drives
  + sg_logs: add cache memory statistics log (sub)page
  + sg_vpd, sg_inq: extend Block limits VPD page (sbc3r19)
  + sg_vpd: add Thin provisioning VPD page (sbc3r20) and
            TapeAlert supported flags VPD page
  + sg_inq: note VPD page support better in sg_vpd
  + sg_persist: add transport specific transportID format
    - allow transportIDs to be read from named file
  + sg_opcodes: allow --opcode= option to take OP and SA
    values (comma seperated)
    - tweak print format, remove test code
  + sg_requests: remove test code in progress calculation
  + sg_reset: add target reset option
  + sg_luns: reduce default maxlen to 8192 (for FreeBSD)
  + sg_raw: extend max cdb length from 16 to 256 bytes
    - align heap allocs to page boundaries
  + sg_lib: sg_set_binary_mode() needs config.h included
    - add progress indication sense data descriptor (0xa)
    - change SG3_UTILS_* constants to SG_LIB_*
    - decode service actions within persistent reserve in/out
    - sync with spc4r21
  + sg_cmds_extra: add sg_ll_unmap() and sg_ll_get_lba_status()
  + sg_pt_linux: fix check condition but empty sense buffer;
    - major() macro grief, if present include <linux/kdev_t.h> and
      use MAJOR() instead
  + scripts/sas_disk_blink: moved from this package to sdparm
  + utils/hxascdmp: in Windows set binary mode on read files
  + examples/sg_persist_tst.sh: add PRIN read full status command
  + sg_raw,sg_write_buffer,sg_write_long,sg_write_same: in Windows
    set binary mode on read files
  + sg_pt_win32: default to non-direct variant of SPT interface
    - use './configure --enable-win32-spt-direct' to override
    - non-direct data length set to 16 KB, extended if required
  + debian: incorporate patch from debian sid

-------------------------------------------------------------------
Mon Jun 28 06:38:35 UTC 2010 - jengelh@medozas.de

- use %_smp_mflags

-------------------------------------------------------------------
Tue Jul 21 14:00:16 CEST 2009 - hare@suse.de

- Clean up spec file and remove obsolete cruft

-------------------------------------------------------------------
Fri Apr 17 20:15:58 CEST 2009 - crrodriguez@suse.de

- remove static libraries and "la" files

-------------------------------------------------------------------
Mon Jan 26 15:30:31 CET 2009 - hare@suse.de

- Fixes to rescan-scsi-bus.sh:
  * Implement '--forcerescan' to force a rescan of existing devices
  * Handle LUN changes correctly
  * Check variables before evaluation

-------------------------------------------------------------------
Wed Oct 29 11:05:47 CET 2008 - garloff@suse.de

- rescan-scsi-bus.sh 1.29:
  * Fix error in script (returning "" does not work)
  * Support systems without /proc/scsi
- Don't install INSTALL

-------------------------------------------------------------------
Tue Sep 30 14:11:15 CEST 2008 - hare@suse.de

-  Add %insserv_prereq (bnc#423204)

-------------------------------------------------------------------
Fri Sep 12 20:29:08 CEST 2008 - garloff@suse.de

- Update rescan-scsi-bus.sh script to 1.28:
  * Merge fixes from Hannes
  * Minor cleanups
  * Sort hosts numerically

-------------------------------------------------------------------
Tue Aug 12 18:25:43 CEST 2008 - garloff@suse.de

- Update to sg3_utils-1.27:
  * Adapted to linux-2.6.26 (sg_map26)
  * sg_dd uses flock (rw -- if that fails ro)
  * sg_get_config: OSSC feature (mmc6r02)
- Update to sg3_utils-1.26:
  * Minor fixes and enhancements to
    sg_sat_phy_event, sg_ses, sg_get_config, sg_verify, sg_vpd,
    sg_inq, sg_modes, sg_start, sg_request, sg_luns, sg_dd,
    sg_opcodes, sg_turs.
  * sg_lib: asc/ascq update for spc4r15, osd2r03 service actions,
    sense key specific unit attn queue overflow decoding, ...
  * Restructuring: sg_lib -> sg_lib_data, sg_inq_data, (u)int64_t,
    sg_io_linux -> lib/.
  * Documentation enhancements.

-------------------------------------------------------------------
Wed Jul 16 09:55:33 CEST 2008 - hare@suse.de

- Use correct length parameter for sg_inq (bnc#363438)

-------------------------------------------------------------------
Fri May 23 10:22:31 CEST 2008 - hare@suse.de

- Use 'Provides' to clean update dependency

-------------------------------------------------------------------
Fri May  9 17:31:33 CEST 2008 - schwab@suse.de

- Use autoreconf -i.

-------------------------------------------------------------------
Thu Apr 24 14:14:14 CEST 2008 - hare@suse.de

- Split off from original scsi package.