#!/usr/bin/env bash

. ./test.common

test_start "chronyc commands"

start_chronyd || test_fail
wait_for_sync || test_fail

has_ipv6=$(check_chronyd_features IPV6 && ping6 -c 1 ::1 > /dev/null 2>&1 && echo 1 || echo 0)

for command in \
	"allow 1.2.3.4" \
	"deny 1.2.3.4" \
	"cmddeny" \
	"cmdallow" \
	"cmddeny 1.2.3.4" \
	"cmdallow 1.2.3.4" \
	"add server 127.123.1.1" \
	"delete 127.123.1.1" \
	"burst 1/1" \
	"cyclelogs" \
	"dfreq 1.0e-3" \
	"doffset -0.1" \
	"dump" \
	"offline" \
	"local off" \
	"local" \
	"online" \
	"onoffline" \
	"maxdelay $server 1e-1" \
	"maxdelaydevratio $server 5.0" \
	"maxdelayratio $server 3.0" \
	"maxpoll $server 12" \
	"maxupdateskew $server 10.0" \
	"minpoll $server 10" \
	"minstratum $server 1" \
	"polltarget $server 10" \
	"refresh" \
	"rekey" \
	"reload sources" \
	"reselect" \
	"reselectdist 1e-3" \
	"reset sources" \
	"smoothtime reset" \
	"smoothtime activate" \
; do
	run_chronyc "$command" || test_fail
	check_chronyc_output "^200 OK$" || test_fail
done

run_chronyc "accheck $server" || test_fail
check_chronyc_output "^208 Access allowed$" || test_fail
run_chronyc "accheck 1.2.3.4" || test_fail
check_chronyc_output "^209 Access denied$" || test_fail

run_chronyc "cmdaccheck 1.2.3.4" || test_fail
check_chronyc_output "^208 Access allowed$" || test_fail

run_chronyc "authdata" || test_fail
check_chronyc_output "^Name/IP address             Mode KeyID Type KLen Last Atmp  NAK Cook CLen
=========================================================================
127\.0\.0\.1                      -     0    0    0    -    0    0    0    0$" \
	|| test_chronyc

run_chronyc "clients" || test_fail
check_chronyc_output "^Hostname                      NTP   Drop Int IntL Last     Cmd   Drop Int  Last
===============================================================================
127\.0\.0\.1               [0-9 ]+    0 [-0-9 ]+   -  [ 0-9]+       0      0   -     -$" \
	|| test_fail

run_chronyc "ntpdata $server" || test_fail
check_chronyc_output "^Remote address  : 127\.0\.0\.1 \(7F000001\)
Remote port     : [0-9]+
Local address   : 127\.0\.0\.1 \(7F000001\)
Leap status     : Normal
Version         : 4
Mode            : Server
Stratum         : 10
Poll interval   : (-6|[0-9]+) \([0-9]+ seconds\)
Precision       : [0-9 +-]+ \(0\.[0-9]+ seconds\)
Root delay      : 0\.000000 seconds
Root dispersion : 0\.000000 seconds
Reference ID    : 7F7F0101 \(\)
Reference time  : [A-Za-z0-9: ]+
Offset          : [+-]0\.......... seconds
Peer delay      : 0\.......... seconds
Peer dispersion : 0\.......... seconds
Response time   : 0\.......... seconds
Jitter asymmetry: \+0\.00
NTP tests       : 111 111 1110
Interleaved     : No
Authenticated   : No
TX timestamping : (Daemon|Kernel)
RX timestamping : (Daemon|Kernel)
Total TX        : [0-9]+
Total RX        : [0-9]+
Total valid RX  : [0-9]+$" || test_fail

run_chronyc "selectdata" || test_fail
check_chronyc_output "^S Name/IP Address        Auth COpts EOpts Last Score     Interval  Leap
=======================================================================
M 127\.0\.0\.1                 N ----- -----    0   1\.0    \+0ns    \+0ns  \?$" || test_fail

run_chronyc "serverstats" || test_fail
check_chronyc_output "^NTP packets received       : [0-9]+
NTP packets dropped        : 0
Command packets received   : [0-9]+
Command packets dropped    : 0
Client log records dropped : 0
NTS-KE connections accepted: 0
NTS-KE connections dropped : 0
Authenticated NTP packets  : 0
Interleaved NTP packets    : 0
NTP timestamps held        : 0
NTP timestamp span         : 0$"|| test_fail

run_chronyc "manual on" || test_fail
check_chronyc_output "^200 OK$" || test_fail

run_chronyc "settime now" || test_fail
check_chronyc_output "^200 OK
Clock was.*$" || test_fail

run_chronyc "manual delete 0" || test_fail
check_chronyc_output "^200 OK$" || test_fail

run_chronyc "settime now" || test_fail
check_chronyc_output "^200 OK
Clock was.*$" || test_fail

run_chronyc "manual list" || test_fail
check_chronyc_output "^210 n_samples = 1
#    Date     Time\(UTC\)    Slewed   Original   Residual
=======================================================
 0.*$" || test_fail

run_chronyc "manual reset" || test_fail
check_chronyc_output "^200 OK$" || test_fail

run_chronyc "manual off" || test_fail
check_chronyc_output "^200 OK$" || test_fail

run_chronyc "shutdown" || test_fail
check_chronyc_output "^200 OK$" || test_fail

stop_chronyd || test_fail
check_chronyd_messages || test_fail
start_chronyd || test_fail

run_chronyc "makestep" && test_fail
check_chronyc_output "500 Failure" || test_fail

run_chronyc "trimrtc" && test_fail
check_chronyc_output "513 RTC driver not running" || test_fail

run_chronyc "writertc" && test_fail
check_chronyc_output "513 RTC driver not running" || test_fail

chronyc_host=127.0.0.1

run_chronyc "tracking" || test_fail
check_chronyc_output "^Reference ID" || test_fail

run_chronyc "makestep" && test_fail
check_chronyc_output "^501 Not authorised$" || test_fail

if [ "$has_ipv6" = "1" ]; then
	chronyc_host=::1

	run_chronyc "tracking" || test_fail
	check_chronyc_output "^Reference ID" || test_fail

	run_chronyc "makestep" && test_fail
	check_chronyc_output "^501 Not authorised$" || test_fail
fi

stop_chronyd || test_fail

test_pass