third_party/fuchsia-sdk/fidl/fuchsia.cobalt/cobalt.fidl

// Copyright 2018 The Fuchsia Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

/// Cobalt is the Fuchsia service used to log, collect and analyze metrics.
/// The two main pillars of Cobalt are protecting user privacy and providing
/// high-quality, aggregate metrics to serve system and component software
/// developers' needs.
///
/// This file contains interfaces that allow clients to log Events to
/// Cobalt.
///
/// To use Cobalt, you must have a Project and one or more Metrics registered
/// with the Cobalt registration system. You must also register one or more
/// Reports in order to see the results of your logging aggregated over
/// all Fuchsia devices. Registration of Projects, Metrics and Reports consists
/// of entries in the YAML files in this repo:
/// https:///cobalt-analytics.googlesource.com/config/.
/// In a Garnet checkout that is mapped to ///third_party/cobalt_config.
/// Each registered object has an integer ID and those IDs are used as
/// parameters in the methods in this file.
///
/// While Cobalt's code and registration files are open source, the running
/// system being managed by the Cobalt team is currently intended to be used by
/// software engineers at Google in order to collect metrics in a way that
/// preserves our users' privacy. If you are a Google software engineer
/// please see our internal [user guide](go/fuchsia-cobalt-userguide) or
/// ask for assistance from the Cobalt [team](go/fuchsia-cobalt#comms).
///
/// Usage: First use LoggerFactory to get a Logger for your
/// project. Then you log Events using the Log*() methods.
/// Events are accumulated by the cobalt FIDL service and periodically
/// Observations, derived from the logged Events, are sent to the Cobalt server,
/// where they are used to generate Reports.
library fuchsia.cobalt;

/// The maximum size of a single Event is 100 KB.
const int64 MAX_BYTES_PER_EVENT = 102400;

/// This is intended as a reasonable maximum number of histogram buckets per event.
const uint32 MAX_HISTOGRAM_BUCKETS = 500;

/// Maximum number of Cobalt events that may be logged in a single
/// FIDL call.
const uint32 MAX_BATCHED_EVENTS = 500;

/// Component strings should not be longer than this.
const uint32 MAX_COMPONENT_LENGTH = 64;

/// Timer ids should not be longer than this.
const uint32 MAX_TIMER_ID_LENGTH = 64;

/// String events should not be longer than this.
const uint32 MAX_STRING_EVENT_SIZE = 256;

/// We only support up to 5 event_codes
const uint32 MAX_EVENT_CODE_COUNT = 5;

/// In Cobalt 1.1 we support up to 10 event codes.
const uint32 MAX_METRIC_DIMENSIONS = 10;

/// Channels should not be longer than this.
const uint32 MAX_CHANNEL_NAME_LENGTH = 256;

/// Response codes for Logger operations.
enum Status : int32 {
    OK = 0;

    /// For example the supplied metric id is invalid.
    INVALID_ARGUMENTS = 1;

    /// An attempt was made to log an Event whose serialized size exceeds
    /// MAX_BYTES_PER_EVENT.
    EVENT_TOO_BIG = 2;

    /// Cobalt's local buffer is temporarily full and cannot handle any more
    /// Events at this time. Try again later. This condition should be rare
    BUFFER_FULL = 3;

    /// Catch-all for unexpected errors.
    INTERNAL_ERROR = -1;
};

/// A specification of a Cobalt project.
///
/// Note: This type is part of the Cobalt 1.1 interface which is still
/// in development. Do not use this yet.
table ProjectSpec {
    /// The customer ID, as specified in Cobalt's metrics registry.
    /// If omitted (i.e. set to 0) then it defaults to
    /// the customer ID for the "fuchsia" customer.
    1: uint32 customer_id;

    /// The ID of the project, as specified in Cobalt's metrics registry.
    2: uint32 project_id;
};

/// Note: This protocol is part of the Cobalt 1.1 interface which is still
/// in development. Do not use this yet.
///
[Discoverable]
protocol MetricEventLoggerFactory {
    /// Create a MetricEventLogger for the project specified by `project_spec`.
    CreateMetricEventLogger(ProjectSpec project_spec,
                            request<MetricEventLogger> logger)
        -> (Status status);
};

/// LoggerFactory creates Loggers.
[Discoverable, Layout = "Simple"]
protocol LoggerFactory {
    /// Creates a Logger for the project with the given ID, using the state of
    /// the metrics registry that is bundled with Cobalt. The project must be in
    /// the "fuchsia" customer.
    ///
    /// `project_id` The ID of the client's Cobalt project.
    ///
    /// `status` Returns OK on success or INVALID_ARGUMENTS if there is no
    /// project with the given ID in the version of the metrics registry that
    /// is bundled with Cobalt.
    CreateLoggerFromProjectId(uint32 project_id,
                              request<Logger> logger)
        -> (Status status);

    /// Creates a LoggerSimple for the project with the given ID, using the
    /// state of the metrics registry that is bundled with Cobalt. The project
    /// must be in the "fuchsia" customer.
    ///
    /// `project_id` The ID of the client's Cobalt project.
    ///
    /// `status` Returns OK on success or INVALID_ARGUMENTS if there is no
    /// project with the given ID in the version of the metrics registry that
    /// is bundled with Cobalt.
    CreateLoggerSimpleFromProjectId(uint32 project_id,
                                    request<LoggerSimple> logger)
        -> (Status status);

    /// Creates a Logger for the project specified, using the state of the
    /// metrics registry that is bundled with Cobalt.
    ///
    /// `customer_id` The ID of the client's Cobalt customer.
    ///
    /// `project_id` The ID of the client's Cobalt project.
    ///
    /// `status` Returns OK on success or INVALID_ARGUMENTS if there is no
    /// project with the given IDs in the version of the metrics registry that
    /// is bundled with Cobalt.
    CreateLoggerFromProjectSpec(uint32 customer_id, uint32 project_id,
                                request<Logger> logger)
        -> (Status status);
};

/// A vector of event codes. When used in one of the Log*() calls below,
/// there must be one event code for each dimension of the metric whose
/// metric_id is supplied, or else the call will return INVALID_ARGUMENTS.
/// Each event code is a key from the `event_codes` map of the corresponding
/// MetricDimension.
///
/// This type is part of the Cobalt 1.1 interface which is still in development.
/// Do not use this yet.
using event_vector = vector<uint32>:MAX_METRIC_DIMENSIONS;

/// A histogram that assigns a count to each of several integer ranges.
/// The order of the vector is immaterial.
using integer_histogram = vector<HistogramBucket>:MAX_HISTOGRAM_BUCKETS;

/// Note: This protocol is part of the Cobalt 1.1 interface which is still
/// in development. Do not use this yet.
protocol MetricEventLogger {
    /// Logs the fact that an event has occurred a number of times.
    ///
    /// `metric_id` ID of the metric being logged. It must be one of the metrics
    /// declared in Cobalt's registry for the project associated with this
    /// logger, and it must be of type OCCURRENCE.
    ///
    /// `count` The number of times the event has occurred. The value should
    /// be positive as a value of 0 is ignored.
    ///
    /// `event_codes`. Enum parameters, one for each of the metric's
    /// metric_dimensions. Cobalt aggregates occurrence counts based on this
    /// parameter.
    LogOccurrence(uint32 metric_id, uint64 count, event_vector event_codes)
        -> (Status status);

    /// Logs an integer measurement.
    ///
    /// `metric_id` ID of the metric being logged. It must be one of the metrics
    /// declared in Cobalt's registry for the project associated with this
    /// logger, and it must be of type INTEGER.
    ///
    /// `value` The integer measurement.
    ///
    /// `event_codes`. Enum parameters, one for each of the metric's
    /// metric_dimensions. Cobalt aggregates integer values that have
    /// the same event_codes.
    LogInteger(uint32 metric_id, int64 value, event_vector event_codes)
        -> (Status status);

    /// Logs a histogram giving many approximate integer measurements.
    ///
    /// `metric_id` ID of the metric being logged. It must be one of the metrics
    /// declared in Cobalt's registry for the project associated with this
    /// logger, and it must be of type INTEGER_HISTOGRAM.
    ///
    /// `histogram` The collection of approximate integer measurements.
    ///
    /// `event_codes`. Enum parameters, one for each of the metric's
    /// metric_dimensions. Cobalt aggregates histograms that have the same
    /// event_codes.
    LogIntegerHistogram(uint32 metric_id, integer_histogram histogram,
                        event_vector event_codes)
        -> (Status status);

    /// Logs a string value that was observed.
    ///
    /// `metric_id` ID of the metric being logged. It must be one of the metrics
    /// declared in Cobalt's registry for the project associated with this
    /// logger, and it must be of type STRING.
    ///
    /// `string_value` The string to log.
    ///
    /// `event_codes`. Enum parameters, one for each of the metric's
    /// metric_dimensions. Cobalt aggregates counts of logged strings separately
    /// for each event_codes.
    LogString(uint32 metric_id, string:MAX_STRING_EVENT_SIZE string_value,
              event_vector event_codes)
        -> (Status status);

    /// Bulk logging method, equivalent to making many of the above Log*() calls
    /// at once.
    LogMetricEvents(vector<MetricEvent>:MAX_BATCHED_EVENTS events)
        -> (Status status);

    /// Logs a custom Event.
    ///
    /// `metric_id` ID of the metric being logged. It must be one of the metrics
    /// declared in Cobalt's registry for the project associated with this
    /// logger, and it must be of type CUSTOM.
    ///
    /// `event_values` The values for the custom Event. There must be one value
    /// for each dimension of the Metric and the types of the values must
    /// be consistent with the dimensions declared in the Metric definition.
    LogCustomEvent(uint32 metric_id, vector<CustomEventValue>:MAX event_values)
        -> (Status status);
};

/// A specification of an event that occurred to be passed to LogMetricEvents().
///
/// Note: This type is part of the Cobalt 1.1 interface which is still
/// in development. Do not use this yet.
struct MetricEvent {
    /// ID of the metric being logged. It must be one of the metrics
    /// declared in Cobalt's registry for the project associated with the
    /// MetricEventLogger being used and its type must match the type of
    /// `payload`.
    uint32 metric_id;

    /// `event_codes`. Enum parameters corresponding to the metric's additional
    /// dimensions.
    event_vector event_codes;

    /// The metric-type-specific data for the event being logged.
    MetricEventPayload payload;
};

/// The variadic part of a MetricEvent.
///
/// Note: This type is part of the Cobalt 1.1 interface which is still
/// in development. Do not use this yet.
flexible union MetricEventPayload {
    /// This should be used for metrics of type OCCURRENCE. See
    /// MetricEventLogger::LogOcurrenceCount().
    1: uint64 count;

    /// This should be used for metrics of type INTEGER. See
    /// MetricEventLogger::LogInteger().
    2: int64 integer_value;

    /// This payload type should be used for metrics of type
    /// INTEGER_HISTOGRAM. See
    /// MetricEventLogger::LogIntegerHistogram().
    3: integer_histogram histogram;

    /// This payload type should be used for metrics of type STRING.
    4: string:MAX_STRING_EVENT_SIZE string_value;
};

/////////////////////////////////////////////////////////////////////

// LoggerBase Interface
/////////////////////////////////////////////////////////////////////

/// LoggerBase and its extensions are used to log Events to the Cobalt system.
/// The Cobalt FIDL service stores the Events locally for some period of time,
/// processes the Events to form Observations, and periodically uploads batches
/// of Observations to the Cobalt server. The Cobalt server processes the
/// Observations and generates Reports. See [TODO(rudominer)] for more
/// description of the Cobalt server and Reports.
///
/// LoggerBase or one of its extensions is associated with a single Cobalt
/// project.
///
/// This interface conforms to the Simple layout so that Simple bindings
/// may be generated for it. For the full interfaces, see Logger and LoggerSimple
/// below.
[Layout = "Simple"]
protocol LoggerBase {
    /// Logs the fact that an event has occurred.
    ///
    /// `metric_id` ID of the metric to use. It must be one of the Metrics
    /// from the ProjectProfile used to obtain this Logger, and it must be of
    /// type EVENT_OCCURRED.
    ///
    /// `event_code` The index of the event that occurred. The indexed set of all
    /// event codes and their labels is specified in the metric definition.
    LogEvent(uint32 metric_id, uint32 event_code)
        -> (Status status);

    /// Logs that an event has occurred a given number of times.
    ///
    /// `metric_id` ID of the metric to use. It must be one of the Metrics
    /// from the ProjectProfile used to obtain this Logger, and it must be of
    /// type EVENT_COUNT.
    ///
    /// `event_code` The index of the event that occurred. The indexed set of all
    /// event codes and their labels is specified in the metric definition.
    ///
    /// `component` Optionally, a component associated with the event may also be
    /// logged. Any notion of component that makes sense may be used or use the
    /// empty string if there is no natural notion of component.
    ///
    /// `period_duration_micros` Optionally, the period of time over which the
    /// `count` events occurred may be logged. If this is not relevant the value
    /// may be set to 0. Otherwise specify the period duration as a number of
    /// microseconds.
    ///
    /// `count` The number of times the event occurred. One may choose to always
    /// set this value to 1 and always set
    ///
    /// `period_duration_micros` to 0 in order to achieve a semantics similar to
    /// the LogEventOccurred() method, but with a `component`.
    LogEventCount(uint32 metric_id, uint32 event_code, string:MAX_COMPONENT_LENGTH component,
                  int64 period_duration_micros, int64 count)
        -> (Status status);

    /// Logs that an event lasted a given amount of time.
    ///
    /// `metric_id` ID of the metric to use. It must be one of the Metrics
    /// from the ProjectProfile used to obtain this Logger, and it must be of
    /// type ELAPSED_TIME.
    ///
    /// `event_code` The index of the event that occurred. The indexed set of all
    /// event codes and their labels is specified in the metric definition.
    ///
    /// `component` Optionally, a component associated with the event may also be
    /// logged. Any notion of component that makes sense may be used or use the
    /// empty string if there is no natural notion of component.
    ///
    /// `elapsed_micros` The elapsed time of the event, specified as a number of
    /// microseconds.
    LogElapsedTime(uint32 metric_id, uint32 event_code, string:MAX_COMPONENT_LENGTH component,
                   int64 elapsed_micros)
        -> (Status status);

    /// Logs a measured average frame rate.
    ///
    /// `metric_id` ID of the metric to use. It must be one of the Metrics
    /// from the ProjectProfile used to obtain this Logger, and it must be of
    /// type FRAME_RATE.
    ///
    /// `event_code` The index of the event that associated with the frame-rate
    /// measurement. The indexed set of all event codes and their labels is
    /// specified in the metric definition.
    ///
    /// `component` Optionally, a component associated with the frame-rate
    /// measurement may also be logged. Any notion of component that makes sense
    /// may be used or use the empty string if there is no natural notion of
    /// component.
    ///
    /// `fps` The average-frame rate in frames-per-second.
    LogFrameRate(uint32 metric_id, uint32 event_code, string:MAX_COMPONENT_LENGTH component,
                 float32 fps)
        -> (Status status);

    /// Logs a measured memory usage.
    ///
    /// `metric_id` ID of the metric to use. It must be one of the Metrics
    /// from the ProjectProfile used to obtain this Logger, and it must be of
    /// type MEMORY_USAGE.
    ///
    /// `event_code` The index of the event type associated with the memory
    /// usage. The indexed set of all event codes and their labels is specified
    /// in the metric definition.
    ///
    /// `component` Optionally, a component associated with the memory usage may
    /// also be logged. Any notion of component that makes sense may be used or
    /// use the empty string if there is no natural notion of component.
    ///
    /// `bytes` The memory used, in bytes.
    LogMemoryUsage(uint32 metric_id, uint32 event_code, string:MAX_COMPONENT_LENGTH component,
                   int64 bytes)
        -> (Status status);

    /// This method is part of Cobalt's helper service for measuring the time
    /// delta between two events that occur in different processes. This starts
    /// the timer. A corresponding invocation of EndTimer() with the same
    /// `timer_id` ends the timer. After both StartTimer() and EnvdTimer() have
    /// been invoked, LogElapsedTime() will be invoked with the difference
    /// between the end timestamp and the start timestamp as the value of
    /// `duration_microseconds`. It is OK if Cobalt receives the EndTimer()
    /// call before the StartTimer() call.
    ///
    /// `metric_id` ID of the metric to use. It must be one of the Metrics
    /// from the ProjectProfile used to obtain this Logger, and it must be of
    /// type ELAPSED_TIME.
    ///
    /// `event_code` The index of the event type to associate with the elapsed
    /// time. This is passed to LogElapsedTime()
    ///
    /// `component` Optionally, a component associated with the event may also be
    /// logged. See the description at LogElapsedTime().
    ///
    /// `timer_id` The ID of the timer being started. This is an arbitrary
    /// non-empty string provided by the caller and it is the caller's
    /// responsibility to ensure that Cobalt receives a pair of StartTimer(),
    /// EndTimer() calls with this id before the timeout and without any
    /// intervening additional calls to StartTimer() or EndTimer() using the same
    /// id. Once such a pair is received Cobalt will delete the timer with this
    /// ID and after that the ID may be re-used.
    ///
    /// `timestamp` The timestamp to set as the start of the timer. The units
    /// must be microseconds. The absolute value does not matter, only the
    /// difference between the end and start timestamps will be used.
    ///
    /// `timeout_s` The number of seconds Cobalt should wait to receive the
    /// corresponding EndTimer() call with the same `timer_id`. If Cobalt has
    /// already received the corresponding EndTimer() call before receiving this
    /// StartTimer() call then this value is ignored as the timeout has already
    /// been set by the EndTimer() call. If Cobalt does not receive the
    /// corresponding EndTimer() call before the timeout then the timer will be
    /// deleted and this invocation of StartTimer() will be forgotten. Must be a
    /// positive value less than 300.
    ///
    /// `status` Returns OK on success. There are two success cases:
    ///     (i) Cobalt does not currently have any timers with the given
    ///         timer_id. In that case this call creates a new timer with
    ///         the given ID and start timestamp.
    ///     (ii) Cobalt currently has a timer with the given timer_id for
    ///         which it has received exactly one EndTimer() call and no
    ///         StartTimer() calls. In this case Cobalt will delete the
    ///         timer and invoke LogElapsedTime() using the difference
    ///         between the end timestamp and the start timestamp as the
    ///         value of `duration_micros`. It is ok if this value is
    ///         negative.
    ///     Returns INVALID_ARGUMENTS if `timer_id` is empty, the timeout
    ///        is not positive and less than 5 minutes or Cobalt currently
    ///        has a timer with the given timer_ID and it already has a start
    ///        timestamp. In the last case Cobalt will delete the timer with
    ///        the given `timer_id` and this invocation of StartTimer()
    ///        will be forgotten.
    ///     Any error returned by LogElapsedTime() may also be returned by this
    ///     method.
    StartTimer(uint32 metric_id, uint32 event_code, string:MAX_COMPONENT_LENGTH component,
               string:MAX_TIMER_ID_LENGTH timer_id, uint64 timestamp, uint32 timeout_s)
        -> (Status status);

    /// This method is part of Cobalt's helper service for measuring the time
    /// delta between two events that occur in different processes. This ends
    /// the timer. A corresponding invocation of StartTimer() with the same
    /// `timer_id` starts the timer. After both StartTimer() and EndTimer() have
    /// been invoked, LogElapsedTime() will be invoked with the difference
    /// between the end timestamp and the start timestamp as the value of
    /// `duration_microseconds`. It is OK if Cobalt receives the EndTimer()
    /// call before the StartTimer() call.
    ///
    /// `timer_id` The ID of the timer being ended. This is an arbitrary
    /// non-empty string provided by the caller and it is the caller's
    /// responsibility to ensure that Cobalt receives a pair of StartTimer(),
    /// EndTimer() calls with this id before the timeout and without any
    /// intervening additional calls to StartTimer() or EndTimer() using the same
    /// id. Once such a pair is received Cobalt will delete the timer with this
    /// ID and after that the ID may be re-used.
    ///
    /// `timestamp` The timestamp to set as the end of the timer. The units must
    /// be microseconds. The absolute value does not matter, only the difference
    /// between the end and start timestamps will be used.
    ///
    /// `timeout_s` The number of seconds Cobalt should wait to receive the
    /// corresponding EndTimer() call with the same `timer_id`. If Cobalt has
    /// already received the corresponding EndTimer() call before receiving this
    /// StartTimer() call then this value is ignored as the timeout has already
    /// been set by the EndTimer() call. If Cobalt does not receive the
    /// corresponding EndTimer() call before the timeout then the timer will be
    /// deleted and this invocation of StartTimer() will be forgotten. Must be a
    /// positive value less than 300.
    ///
    /// `status` Returns OK on success. There are two success cases:
    ///     (i) Cobalt does not currently have any timers with the given
    ///         timer_id. In that case this call creates a new timer with
    ///         the given ID and end timestamp.
    ///     (ii) Cobalt currently has a timer with the given timer_id for
    ///         which it has received exactly one StartTimer() call and no
    ///         EndTimer() calls. In this case Cobalt will delete the
    ///         timer and invoke LogElapsedTime() using the difference
    ///         between the end timestamp and the start timestamp as the
    ///         value of `duration_micros`. It is ok if this value is
    ///         negative.
    ///     Returns INVALID_ARGUMENTS if `timer_id` is empty, the timeout
    ///        is not positive and less than 5 minutes or Cobalt currently
    ///        has a timer with the given timer_ID and it already has an end
    ///        timestamp. In the last case Cobalt will delete the timer with
    ///        the given `timer_id` and this invocation of EndTimer()
    ///        will be forgotten.
    ///     Any error returned by LogElapsedTime() may also be returned by this
    ///     method.
    EndTimer(string:MAX_TIMER_ID_LENGTH timer_id, uint64 timestamp, uint32 timeout_s)
        -> (Status status);

    // Method ordinals >= 100 are reserved for sub-interfaces.
};

/////////////////////////////////////////////////////////////////////

// Logger Interface
/////////////////////////////////////////////////////////////////////

/// A value for a custom Event. This is used by the method LogCustomEvent().
struct CustomEventValue {
    /// The name of the Metric dimension this value is for.
    string:MAX dimension_name;

    /// The value for that dimension.
    Value value;
};

/// A value that may be a string, int, double, or index.
union Value {
    1: string:MAX string_value;
    2: int64 int_value;
    3: float64 double_value;
    4: uint32 index_value;
};

/// One bucket of histogram. This is used by the methods LogIntHistogram() from
/// Cobalt 1.0 and LogIntegerHistogram from Cobalt 1.1.
struct HistogramBucket {
    /// The index of the bucket. The MetricDefinition includes a specification
    /// of a sequence of N+1 integer-range buckets that are indexed from
    /// 0, the underflow bucket, to N, the overflow bucket.
    uint32 index;

    /// The number of values in that bucket.
    uint64 count;
};

/// Used to log that an event has occurred a given number of times. Using this
/// struct with LogCobaltEvent() is equivalent to invoking LogEventCount().
struct CountEvent {
    /// The number of microseconds over which this count was observed.
    int64 period_duration_micros;

    /// The number of times the event occurred
    int64 count;
};

/// Used to log an event that has no extra fields. Using this struct with
/// LogCobaltEvent() is equivalent to invoking LogEvent().
struct Event {
};

/// The variadic part of a CobaltEvent.
union EventPayload {
    /// This maps to a call to LogEvent().
    1: Event event;

    /// This maps to a call to LogEventCount().
    2: CountEvent event_count;

    /// This maps to a call to LogElapsedTime().
    3: int64 elapsed_micros;

    /// This maps to a call to LogFrameRate().
    4: float32 fps;

    /// This maps to a call to LogMemoryUsage().
    5: int64 memory_bytes_used;

    // Previously mapped to a call to LogString() (deprecated).
    6: reserved;

    /// This maps to a call to LogIntHistogram().
    7: vector<HistogramBucket>:MAX_HISTOGRAM_BUCKETS int_histogram;
};

/// A specification of an event that occurred to be passed to LogCobaltEvent().
/// This is part of an alternative API to cobalt that uses a single method with a
/// variadic parameter instead of the multiple methods above. This technique
/// allows multiple event codes to be passed whereas the methods above support
/// only a single event code.
struct CobaltEvent {
    /// ID of the metric to use. It must be one of the Metrics from the
    /// ProjectProfile used to obtain this Logger, and its type must match the
    /// `payload` type.
    uint32 metric_id;

    /// The event codes for the event that occurred. There must be one event code
    /// given for each dimension specified in the metric definition.
    vector<uint32>:MAX_EVENT_CODE_COUNT event_codes;

    /// Optionally, a component associated with the event that occurred may also
    /// be logged also be logged. Any notion of component that makes sense may be
    /// used or use the empty string if there is no natural notion of component.
    string:MAX_COMPONENT_LENGTH? component;

    /// The event-specific information for the event to be logged.
    EventPayload payload;
};

/// Logger is an extension of the LoggerBase interface that adds some additional
/// methods that do not naturally conform to the Simple layout. We opt for
/// a natural easy-to-understand interface at the cost of not being "Simple".
/// See the interface LoggerSimple below for versions of some of these methods
/// that do conform to the Simple layout.
protocol Logger {
    compose LoggerBase;

    /// Logs a histogram over a set of integer buckets. The meaning of the
    /// Metric and the buckets is specified in the Metric definition.
    ///
    /// This method is intended to be used in situations where the client
    /// wishes to aggregate a large number of integer-valued measurements
    /// *in-process*, prior to submitting the data to Cobalt.
    /// One reason a client may wish to do this is that the measurements occur
    /// with very high frequency and it is not practical to make a FIDL call
    /// for each individual measurement.
    ///
    /// `metric_id` ID of the metric to use. It must be one of the Metrics
    /// from the ProjectProfile used to obtain this Logger, and it must be of
    /// type INT_HISTOGRAM.
    ///
    /// `event_code` The index of the event type associated with the
    /// integer-valued measurement. The indexed set of all event codes and their
    /// labels is specified in the metric definition.
    ///
    /// `component` Optionally, a component associated with integer-valued
    /// measurements may also be logged. Any notion of component that makes sense
    /// may be used or use the empty string if there is no natural notion of
    /// component.
    ///
    /// `histogram` The histogram to log. Each HistogramBucket gives the count
    /// for one bucket of the histogram. The definitions of the buckets is given
    /// in the Metric definition.
    LogIntHistogram(uint32 metric_id, uint32 event_code,
                    string:MAX_COMPONENT_LENGTH component, vector<HistogramBucket>:MAX_HISTOGRAM_BUCKETS histogram)
        -> (Status status);

    /// Logs a custom Event. The semantics of the Metric are specified in the
    /// Metric definition.
    ///
    /// `metric_id` ID of the metric to use. It must be one of the Metrics
    /// from the ProjectProfile used to obtain this Logger, and it must be of
    /// type CUSTOM.
    ///
    /// `event_values` The values for the custom Event. There is one value for
    /// each dimension of the Metric. The number and types of the values must
    /// be consistent with the dimensions declared in the Metric definition.
    LogCustomEvent(uint32 metric_id, vector<CustomEventValue>:MAX event_values)
        -> (Status status);

    /// Logs a CobaltEvent. This method offers an alternative API to Cobalt that
    /// uses a single method with a variadic parameter instead of the multiple
    /// methods defined above. The reason to use this method is that a
    /// CobaltEvent allows multiple event codes to be specified whereas the
    /// methods above allow only a single event code.
    LogCobaltEvent(CobaltEvent event) -> (Status status);

    /// Logs a list of CobaltEvents. This method is equivalent to invoking
    /// LogCobaltEvent() multiple times but is more efficient as it requires only
    /// a single FIDL call.
    LogCobaltEvents(vector<CobaltEvent>:MAX_BATCHED_EVENTS events) -> (Status status);
};

/////////////////////////////////////////////////////////////////////

// LoggerSimple Interface
/////////////////////////////////////////////////////////////////////

/// LoggerSimple is an extension of the LoggerBase interface that adds some
/// additional methods intended to be used by lower-levels of the Fuchsia system.
///
/// This interface conforms to the Simple layout so that Simple bindings
/// may be generated for it.
[Layout = "Simple"]
protocol LoggerSimple {
    compose LoggerBase;

    /// Logs a histogram over a set of integer buckets. The meaning of the
    /// Metric and the buckets is specified in the Metric definition.
    ///
    /// See the method LogIntHistogram() in the Logger interface for more
    /// information. This method is similar except that it adheres to the
    /// requirements of Simple layout. Instead of a vector of HistogramBucekts
    /// this version takes two parallel vectors of bucket indices and the
    /// corresponding bucket counts.
    LogIntHistogram(uint32 metric_id, uint32 event_code,
                    string:MAX_COMPONENT_LENGTH component,
                    vector<uint32>:MAX_HISTOGRAM_BUCKETS bucket_indices,
                    vector<uint64>:MAX_HISTOGRAM_BUCKETS bucket_counts)
        -> (Status status);
};

/////////////////////////////////////////////////////////////////////

// SystemProfileUpdater Interface
/////////////////////////////////////////////////////////////////////

/// The state of a single experiment on a device or binary.
struct Experiment {
    /// The id of the experiment as defined by the A/B Experiment framework.
    uint64 experiment_id;
    /// The id of the experiment arm as defined by the A/B Experiment framework.
    uint32 arm_id;
};

/// The SystemDataUpdater interface allows callers to update the state of
/// the System Data in Cobalt. This includes the SystemProfile and experiment
/// state. The changes are global and affect all loggers running on the device.
[Discoverable]
protocol SystemDataUpdater {
    /// Resets Cobalt's view of the system-wide experiment state and replaces it
    /// with the given values.
    ///
    /// `experiments`  All experiments the device has a notion of and the arms
    /// the device belongs to for each of them. These are the only experiments
    /// the device can collect data for.
    SetExperimentState(vector<Experiment>:MAX experiments)
        -> (Status status);

    /// Sets Cobalt's view of the system-wide channel replacing the existing values.
    ///
    /// `current_channel` The channel that the device last used as an update source. This value may
    /// be empty to indicate that the device is not currently associated with any channel.
    SetChannel(string:MAX_CHANNEL_NAME_LENGTH current_channel) -> (Status status);
};