type=page
status=published
title=create-jmsdest
next=create-jms-host.html
prev=create-jdbc-resource.html
~~~~~~

= create-jmsdest

[[create-jmsdest-1]][[GSRFM00038]][[create-jmsdest]]

== create-jmsdest

Creates a JMS physical destination

[[sthref336]]

=== Synopsis

[source]
----
asadmin [asadmin-options] create-jmsdest [--help]
--desttype dest_type
[--property (name=value)[:name=value]*]
[--target target]
[--force={false|true}]
dest_name
----

[[sthref337]]

=== Description

The `create-jmsdest` subcommand creates a Java Message Service (JMS)
physical destination. Typically, you use the `create-jms-resource`
subcommand to create a JMS destination resource that has a `Name`
property that specifies the physical destination. The physical
destination is created automatically when you run an application that
uses the destination resource. Use the `create-jmsdest` subcommand if
you want to create a physical destination with non-default property
settings.

This subcommand is supported in remote mode only. Remote `asadmin`
subcommands require a running domain administration server (DAS).

[[sthref338]]

=== Options

asadmin-options::
  Options for the `asadmin` utility. For information about these
  options, see the link:asadmin.html#asadmin-1m[`asadmin`(1M)] help page.
`--help`::
`-?`::
  Displays the help text for the subcommand.
`--desttype`::
  The type of the JMS destination. Valid values are `topic` and `queue`.
`--property`::
  Optional attribute name/value pairs for configuring the physical
  destination. You can specify the following properties for a physical
  destination.

  `MaxNumMsgs`;;
    The maximum number of unconsumed messages permitted for the
    destination. A value of -1 denotes an unlimited number of messages.
    The default value is -1. For the dead message queue, the default
    value is 1000. +
    If the `limitBehavior` property is set to `FLOW_CONTROL`, it is
    possible for the specified message limit to be exceeded because the
    broker cannot react quickly enough to stop the flow of incoming
    messages. In such cases, the value specified for `maxNumMsgs` serves
    as merely a hint for the broker rather than a strictly enforced limit.
  `MaxBytesPerMsg`;;
    The maximum size, in bytes, of any single message. Rejection of a
    persistent message is reported to the producing client with an
    exception; no notification is sent for non-persistent messages. +
    The value may be expressed in bytes, kilobytes, or megabytes, using
    the following suffixes:
    `b`:::
      Bytes
    `k`:::
      Kilobytes (1024 bytes)
    `m`:::
      Megabytes (1024 x 1024 = 1,048,576 bytes)
+
A value with no suffix is expressed in bytes; a value of -1 denotes
    an unlimited message size. The default value is -1.
  `MaxTotalMsgBytes`;;
    The maximum total memory, in bytes, for unconsumed messages. The
    default value is -1. The syntax is the same as for `maxBytesPerMsg`.
    For the dead message queue, the default value is `10m`.
  `LimitBehavior`;;
    The behavior of the message queue broker when the memory-limit
    threshold is reached. Valid values are as follows:
    `REJECT_NEWEST`:::
      Reject newest messages and notify the producing client with an
      exception only if the message is persistent. This is the default
      value.
    `FLOW_CONTROL`:::
      Slow the rate at which message producers send messages.
    `REMOVE_OLDEST`:::
      Throw out the oldest messages.
    `REMOVE_LOW_PRIORITY`:::
      Throw out the lowest-priority messages according to age, with no
      notification to the producing client.
+
If the value is `REMOVE_OLDEST` or `REMOVE_LOW_PRIORITY` and the
    `useDMQ` property is set to `true`, excess messages are moved to the
    dead message queue. For the dead message queue itself, the default
    limit behavior is `REMOVE_OLDEST`, and the value cannot be set to
    `FLOW_CONTROL`.
  `MaxNumProducers`;;
    The maximum number of message producers for the destination.
    When this limit is reached, no new producers can be created.
    A value of -1 denotes an unlimited number of producers.
    The default value is 100.
    This property does not apply to the dead message queue.
  `ConsumerFlowLimit`;;
    The maximum number of messages that can be delivered to a consumer
    in a single batch. A value of -1 denotes an unlimited number of
    messages. The default value is 1000. The client runtime can override
    this limit by specifying a lower value on the connection factory
    object. +
    In load-balanced queue delivery, this is the initial number of
    queued messages routed to active consumers before load balancing
    begins.
  `UseDMQ`;;
    If set to `true`, dead messages go to the dead message queue. If set
    to `false`, dead messages are discarded. The default value is `true`.
  `ValidateXMLSchemaEnabled`;;
    If set to `true`, XML schema validation is enabled for the
    destination. The default value is `false`. +
    When XML validation is enabled, the Message Queue client runtime
    will attempt to validate an XML message against the specified XSDs
    (or against the DTD, if no XSD is specified) before sending it to
    the broker. If the specified schema cannot be located or the message
    cannot be validated, the message is not sent, and an exception is
    thrown. +
    This property should be set when a destination is inactive: that is,
    when it has no consumers or producers and when there are no messages
    in the destination. Otherwise the producer must reconnect.
  `XMLSchemaURIList`;;
    A space-separated list of XML schema document (XSD) URI strings. The
    URIs point to the location of one or more XSDs to use for XML schema
    validation, if `validateXMLSchemaEnabled` is set to `true`.
    The default value is `null`. +
    Use double quotes around this value if multiple URIs are specified,
    as in the following example:
+
[source]
----
"http://foo/flap.xsd http://test.com/test.xsd"
----
+
If this property is not set or `null` and XML validation is enabled,
    XML validation is performed using a DTD specified in the XML
    document. If an XSD is changed as a result of changing application
    requirements, all client applications that produce XML messages
    based on the changed XSD must reconnect to the broker.

+
To modify the value of these properties, you can use the
  as-install``/mq/bin/imqcmd`` command. See "link:../openmq/mq-admin-guide/physical-destination-properties.html#GMADG00049[Physical
  Destination Property Reference]" in Open Message Queue Administration
  Guide for more information.
`--target`::
  Creates the physical destination only for the specified target.
  Although the `create-jmsdest` subcommand is related to resources, a
  physical destination is created using the JMS Service (JMS Broker),
  which is part of the configuration. A JMS Broker is configured in the
  config section of `domain.xml`. Valid values are as follows:

  `server`;;
    Creates the physical destination for the default server instance.
    This is the default value.
  configuration-name;;
    Creates the physical destination in the specified configuration.
  cluster-name;;
    Creates the physical destination for every server instance in the
    specified cluster.
  instance-name;;
    Creates the physical destination for the specified server instance.

`--force`::
  Specifies whether the subcommand overwrites the existing JMS physical
  destination of the same name. The default value is `false`.

[[sthref339]]

=== Operands

dest_name::
  A unique identifier for the JMS destination to be created.

[[sthref340]]

=== Examples

[[GSRFM495]][[sthref341]]

==== Example 1   Creating a JMS physical destination

The following subcommand creates a JMS physical queue named
`PhysicalQueue` with non-default property values.

[source]
----
asadmin> create-jmsdest --desttype queue
--property maxNumMsgs=1000:maxBytesPerMsg=5k PhysicalQueue
Command create-jmsdest executed successfully.
----

[[sthref342]]

=== Exit Status

0::
  subcommand executed successfully
1::
  error in executing the subcommand

[[sthref343]]

=== See Also

link:asadmin.html#asadmin-1m[`asadmin`(1M)]

link:create-jms-resource.html#create-jms-resource-1[`create-jms-resource`(1)],
link:delete-jmsdest.html#delete-jmsdest-1[`delete-jmsdest`(1)],
link:flush-jmsdest.html#flush-jmsdest-1[`flush-jmsdest`(1)],
link:list-jmsdest.html#list-jmsdest-1[`list-jmsdest`(1)]