//  ========================================================================
//  Copyright (c) 1995-2017 Mort Bay Consulting Pty. Ltd.
//  ========================================================================
//  All rights reserved. This program and the accompanying materials
//  are made available under the terms of the Eclipse Public License v1.0
//  and Apache License v2.0 which accompanies this distribution.
//
//      The Eclipse Public License is available at
//      http://www.eclipse.org/legal/epl-v10.html
//
//      The Apache License v2.0 is available at
//      http://www.opensource.org/licenses/apache2.0.php
//
//  You may elect to redistribute this code under either of these licenses.
//  ========================================================================

[[jetty-runner]]
=== Use Jetty without an installed distribution

The idea of the `jetty-runner` is extremely simple – run a webapp directly from the command line using a single jar file and as much default configuration as possible.
Of course, if your webapp is not so straightforward, the `jetty-runner` has command line options which allow you to customize the execution environment.

[[jetty-runner-preparation]]
==== Preparation

You will need the `jetty-runner` jar:

1.  http://central.maven.org/maven2/org/eclipse/jetty/jetty-runner/[Get] the `jetty-runner` jar available at http://search.maven.org/#browse[maven central].

==== Deploying a simple context

Let's assume we have a very simple webapp that does not need any resources from its environment, nor any configuration apart from the defaults.
Starting it is as simple as performing the following:

[source, screen, subs="{sub-order}"]
....
> java -jar jetty-runner.jar simple.war
....

This will start Jetty on port 8080, and deploy the webapp to `/`.

Your webapp does not have to be packed into a war, you can deploy a webapp that is a directory instead in the same way:

[source, screen, subs="{sub-order}"]
....
> java -jar jetty-runner.jar simple
....

In fact, the webapp does not have to be a war or even a directory, it can simply be a Jetty link:#using-context-provider[context xml] file that describes your webapp:

[source, screen, subs="{sub-order}"]
....
> java -jar jetty-runner.jar simple-context.xml
....

____
[NOTE]
When using a context xml file, the application being deployed is not even required to be a fully-fledged webapp. It can simply be a Jetty link:#what-is-a-context[context].
____

==== Deploying multiple contexts

If you have more than one webapp that must be deployed, simply provide them all on the command line.
You can control the context paths for them using the `--path` parameter.
Here's an example of deploying 2 wars (although either or both of them could be unpacked directories instead):

[source, screen, subs="{sub-order}"]
....
> java -jar jetty-runner.jar --path /one my1.war --path /two my2.war
....

If you have context xml files that describe your webapps, you can fully configure your webapps in them and hence you don't need to use the command line switches.
Just provide the list of context files like so:

[source, screen, subs="{sub-order}"]
....
> java -jar jetty-runner.jar my-first-context.xml my-second-context.xml my-third-context.xml
....

____
[NOTE]
Switched used on the command line override configuration file settings.
So, for example, you could set the context path for the webapp inside the context xml file, and use the `--path` switch to override it on the command line.
____


===== Changing the default port

By default the `jetty-runner` will listen on port 8080.
You can easily change this on the command line using the `--port` command.
Here's an example that runs our simple.war on port 9090:

[source, screen, subs="{sub-order}"]
....
> java -jar jetty-runner.jar --port 9090 simple.war
....

===== Using jetty.xml files

Instead of, or in addition to, using command line switches, you can use one or more `jetty.xml` files to configure the environment for your webapps.
Here's an example where we apply two different `jetty.xml` files:

[source, screen, subs="{sub-order}"]
....
> java -jar jetty-runner.jar --config jetty.xml --config jetty-https.xml simple.war
....

===== Full configuration reference

You can see the fill set of configuration options using the `--help` switch:

[source, screen, subs="{sub-order}"]
....
> java -jar jetty-runner.jar --help
....

Here's what the output will look like:

[source, plain, subs="{sub-order}"]
----

Usage: java [-Djetty.home=dir] -jar jetty-runner.jar [--help|--version] [ server opts] [[ context opts] context ...]
Server opts:
 --version                           - display version and exit
 --log file                          - request log filename (with optional 'yyyy_mm_dd' wildcard
 --out file                          - info/warn/debug log filename (with optional 'yyyy_mm_dd' wildcard
 --host name|ip                      - interface to listen on (default is all interfaces)
 --port n                            - port to listen on (default 8080)
 --stop-port n                       - port to listen for stop command
 --stop-key n                        - security string for stop command (required if --stop-port is present)
 [--jar file]*n                      - each tuple specifies an extra jar to be added to the classloader
 [--lib dir]*n                       - each tuple specifies an extra directory of jars to be added to the classloader
 [--classes dir]*n                   - each tuple specifies an extra directory of classes to be added to the classloader
 --stats [unsecure|realm.properties] - enable stats gathering servlet context
 [--config file]*n                   - each tuple specifies the name of a jetty xml config file to apply (in the order defined)
Context opts:
 [[--path /path] context]*n          - WAR file, web app dir or context xml file, optionally with a context path
----

Printing the version:::
Print out the version of Jetty and then exit immediately.
+
[source, screen, subs="{sub-order}"]
....
> java -jar jetty-runner.jar --version
....

Configuring a request log:::
Cause Jetty to write a request log with the given name.
If the file is prefixed with `yyyy_mm_dd` then the file will be automatically rolled over.
Note that for finer grained configuration of the link:{JDURL}/org/eclipse/jetty/server/NCSARequestLog.html[request log], you will need to use a Jetty xml file instead.
+
[source, screen, subs="{sub-order}"]
....
> java -jar jetty-runner.jar --log yyyy_mm_dd-requests.log  my.war
....

Configuring the output log:::
Redirect the output of jetty logging to the named file.
If the file is prefixed with `yyyy_mm_dd` then the file will be automatically rolled over.
+
[source, screen, subs="{sub-order}"]
....
> java -jar jetty-runner.jar --out yyyy_mm_dd-output.log my.war
....

Configuring the interface for http:::
Like Jetty standalone, the default is for the connectors to listen on all interfaces on a machine.
You can control that by specifying the name or ip address of the particular interface you wish to use with the `--host` argument:
+
[source, screen, subs="{sub-order}"]
....
> java -jar jetty-runner.jar --host 192.168.22.19 my.war
....

Configuring the port for http:::
The default port number is 8080.
To link:#how-to-configure-connectors[configure a https connector], use a Jetty xml config file instead.
+
[source, screen, subs="{sub-order}"]
....
> java -jar jetty-runner.jar --port 9090  my.war
....

Configuring stop:::
You can configure a port number for jetty to listen on for a stop command, so you are able to stop it from a different terminal.
This requires the use of a "secret" key, to prevent malicious or accidental termination.
Use the `--stop-port` and `--stop-key` parameters as arguments to the `jetty-runner`:
+
[source, screen, subs="{sub-order}"]
....
> java -jar jetty-runner.jar --stop-port 8181 --stop-key abc123

....
+
Then, to stop Jetty from a different terminal, you need to supply the same port and key information.
For this you'll either need a local installation of Jetty, the link:#jetty-maven-plugin[jetty-maven-plugin], the link:#jetty-ant[jetty-ant plugin], or a custom class.
Here's how to use a Jetty installation to perform a stop:
+
[source, screen, subs="{sub-order}"]
....
> java -jar start.jar --stop-port 8181 --stop-key abc123 --stop
....

Configuring the container classpath:::
With a local installation of Jetty, you add jars and classes to the container's classpath by putting them in the `{$jetty.base}/lib` directory.
With the `jetty-runner`, you can use the `--lib`, `--jar` and `--classes` arguments instead to achieve the same thing.
+
`--lib` adds the location of a directory which contains jars to add to the container classpath.
You can add 1 or more.
Here's an example of configuring 2 directories:
+
[source, screen, subs="{sub-order}"]
....
> java -jar jetty-runner.jar --lib /usr/local/external/lib --lib $HOME/external-other/lib my.war
....
+
`--jar` adds a single jar file to the container classpath.
You can add 1 or more.
Here's an example of configuring 3 extra jars:
+
[source, screen, subs="{sub-order}"]
....
> java -jar jetty-runner.jar --jar /opt/stuff/jars/jar1.jar --jar $HOME/jars/jar2.jar --jar /usr/local/proj/jars/jar3.jar  my.war
....
+
`--classes` add the location of a directory containing classes to add to the container classpath.
You can add 1 or more.
Here's an example of configuring a single extra classes dir:
+
[source, screen, subs="{sub-order}"]
....
> java -jar jetty-runner.jar --classes /opt/stuff/classes my.war
....

Gathering statistics:::
If statistics gathering is enabled, then they are viewable by surfing to the context `/stats`.
You may optionally protect access to that context with a password.
Here's an example of enabling statistics, with no password protection:
+
[source, screen, subs="{sub-order}"]
....
> java -jar jetty-runner.jar --stats unsecure my.war
....
+
If we wished to protect access to the `/stats` context, we would provide the location of a Jetty realm configuration file containing authentication and authorization information.
For example, we could use the following example realm file from the Jetty distribution:
+
[source, screen, subs="{sub-order}"]
....
jetty: MD5:164c88b302622e17050af52c89945d44,user
admin: CRYPT:adpexzg3FUZAk,server-administrator,content-administrator,admin
other: OBF:1xmk1w261u9r1w1c1xmq,user
plain: plain,user
user: password,user
# This entry is for digest auth.  The credential is a MD5 hash of username:realmname:password
digest: MD5:6e120743ad67abfbc385bc2bb754e297,user
....
+
Assuming we've copied it into the local directory, we would apply it like so
+
[source, screen, subs="{sub-order}"]
....
> java -jar jetty-runner.jar --stats realm.properties my.war
....
+
After navigating to http://localhost:8080/ a few times, we can point to the stats servlet on http://localhost:8080/stats to see the output:
+
....
Statistics:
Statistics gathering started 1490627ms ago

Requests:
Total requests: 9
Active requests: 1
Max active requests: 1
Total requests time: 63
Mean request time: 7.875
Max request time: 26
Request time standard deviation: 8.349764752888037


Dispatches:
Total dispatched: 9
Active dispatched: 1
Max active dispatched: 1
Total dispatched time: 63
Mean dispatched time: 7.875
Max dispatched time: 26
Dispatched time standard deviation: 8.349764752888037
Total requests suspended: 0
Total requests expired: 0
Total requests resumed: 0


Responses:
1xx responses: 0
2xx responses: 7
3xx responses: 1
4xx responses: 0
5xx responses: 0
Bytes sent total: 1453


Connections:
org.eclipse.jetty.server.ServerConnector@203822411
Protocols:http/1.1
Statistics gathering started 1490606ms ago
Total connections: 7
Current connections open: 1
Max concurrent connections open: 2
Total connections duration: 72883
Mean connection duration: 12147.166666666666
Max connection duration: 65591
Connection duration standard deviation: 23912.40292977684
Total messages in: 7
Total messages out: 7


Memory:
Heap memory usage: 49194840 bytes
Non-heap memory usage: 12611696 bytes
....