//  ========================================================================
//  Copyright (c) 1995-2017 Mort Bay Consulting Pty. Ltd.
//  ========================================================================
//  All rights reserved. This program and the accompanying materials
//  are made available under the terms of the Eclipse Public License v1.0
//  and Apache License v2.0 which accompanies this distribution.
//
//      The Eclipse Public License is available at
//      http://www.eclipse.org/legal/epl-v10.html
//
//      The Apache License v2.0 is available at
//      http://www.opensource.org/licenses/apache2.0.php
//
//  You may elect to redistribute this code under either of these licenses.
//  ========================================================================

[[startup-windows-service]]
=== Startup via Windows Service

There are no components that ship with the Jetty Distribution to make it a formal Windows Service.

However, we recommend the use of https://commons.apache.org/proper/commons-daemon/procrun.html[Apache ProcRun's Daemon].

The techniques outlined here are based on Windows 7 (64-bit), using JDK 8 (64-bit), running on an Intel i7 architecture machine.

Prepare some empty directories to work with.

[source, screen, subs="{sub-order}"]
....
C:\> mkdir opt
C:\> cd opt
C:\opt> mkdir jetty
C:\opt> mkdir logs
C:\opt> mkdir myappbase
C:\opt> mkdir temp
C:\opt> dir
 Volume in drive C has no label.
 Volume Serial Number is DEAD-BEEF

 Directory of C:\opt

11/21/2013  04:06 PM    <DIR>          .
11/21/2013  04:06 PM    <DIR>          ..
11/21/2013  04:06 PM    <DIR>          jetty
11/21/2013  04:06 PM    <DIR>          logs
11/21/2013  04:06 PM    <DIR>          myappbase
11/21/2013  04:06 PM    <DIR>          temp
               0 File(s)              0 bytes
....

The directory purposes are as follows:

C:\opt::
Where the service layer utilities, scripts, and binaries will eventually be.
C:\opt\logs::
Where the logs for the service layer will put its own logs.
+
Typically you will see the audit logs (install/update/delete), StdOutput, and StdError logs here.
C:\opt\jetty::
Where the Jetty Distribution will be unpacked into.
C:\opt\myappbase::
Where your specific set of webapps will be located, including all of the configuration required of the server to make them operational.
C:\opt\temp::
This is the temporary directory assigned to Java by the Service Layer (this is what Java sees as the `java.io.tmpdir` System Property).
+
This is intentionally kept separate from the standard temp directories of Windows, as this location doubles as the Servlet Spec work directory.

Or download Java 8 from: http://www.oracle.com/technetwork/java/javase/downloads/index.html

[source, screen, subs="{sub-order}"]
....
C:\opt>java -version
java version "1.7.0_45"
Java(TM) SE Runtime Environment (build 1.7.0_45-b18)
Java HotSpot(TM) 64-Bit Server VM (build 24.45-b08, mixed mode)
....

Download a copy of the ZIP distribution from the link:#jetty-downloading[Official Eclipse Download Site]

Extract the contents of the `jetty-distribution-{VERSION}` directory to `C:\opt\jetty`

Once complete, the contents of the `C:\opt\jetty` directory should look like this:

[source, screen, subs="{sub-order}"]
....
C:\opt\jetty>dir
 Volume in drive C has no label.
 Volume Serial Number is C8CF-820B

 Directory of C:\opt\jetty

11/21/2013  12:13 PM    <DIR>          .
11/21/2013  12:13 PM    <DIR>          ..
11/21/2013  12:13 PM    <DIR>          bin
11/21/2013  12:13 PM    <DIR>          demo-base
11/21/2013  12:13 PM    <DIR>          etc
11/21/2013  12:13 PM    <DIR>          lib
11/21/2013  12:13 PM            30,012 license-eplv10-aslv20.html
11/21/2013  12:13 PM    <DIR>          logs
11/21/2013  12:13 PM    <DIR>          modules
11/21/2013  12:13 PM             6,262 notice.html
11/21/2013  12:13 PM             1,249 README.TXT
11/21/2013  12:13 PM    <DIR>          resources
11/21/2013  12:13 PM    <DIR>          start.d
11/21/2013  12:13 PM             2,126 start.ini
11/21/2013  12:13 PM            72,226 start.jar
11/21/2013  12:13 PM           341,784 VERSION.txt
11/21/2013  12:13 PM    <DIR>          webapps
               6 File(s)        453,659 bytes
              11 Dir(s)  306,711,420,928 bytes free
....

Download a copy of the https://commons.apache.org/proper/commons-daemon/binaries.html[Apache ProcRun] native binaries.

You should have downloaded a file named `commons-daemon-1.0.15-bin-windows.zip` (the version might be different).
Open the ZIP file and extract the `prunmgr.exe` and `prunsrv.exe` files into the `C:\opt` directory.

Make sure to get the right version of `prunsrv.exe` for your environment.
The ZIP file has both 32 bit and 64 bit versions of this file.

Once you are complete, the contents of `C:\opt` directory should look like this:

[source, screen, subs="{sub-order}"]
....
C:\opt> dir
 Volume in drive C has no label.
 Volume Serial Number is DEAD-BEEF

 Directory of C:\opt

11/21/2013  04:06 PM    <DIR>          .
11/21/2013  04:06 PM    <DIR>          ..
11/21/2013  04:06 PM    <DIR>          jetty
11/21/2013  04:06 PM    <DIR>          logs
11/21/2013  04:06 PM    <DIR>          myappbase
11/21/2013  04:06 PM    <DIR>          temp
11/21/2013  04:11 PM           104,448 prunmgr.exe
11/21/2013  04:11 PM            80,896 prunsrv.exe
               2 File(s)        185,344 bytes
....

Now it's time to setup your new `${jetty.base}` directory to have all of your WebApps and the configurations that they need.

We'll start by specifying which modules we want to use (this will create a start.ini file and also create a few empty directories for you)

[source, screen, subs="{sub-order}"]
....
C:\opt\myappbase>java -jar ..\jetty\start.jar --add-to-start=deploy,http,logging

WARNING: deploy          initialised in ${jetty.base}\start.ini (appended)
WARNING: deploy          enabled in     ${jetty.base}\start.ini
MKDIR: ${jetty.base}\webapps
WARNING: server          initialised in ${jetty.base}\start.ini (appended)
WARNING: server          enabled in     ${jetty.base}\start.ini
WARNING: http            initialised in ${jetty.base}\start.ini (appended)
WARNING: http            enabled in     ${jetty.base}\start.ini
WARNING: server          enabled in     ${jetty.base}\start.ini
WARNING: logging         initialised in ${jetty.base}\start.ini (appended)
WARNING: logging         enabled in     ${jetty.base}\start.ini
MKDIR: ${jetty.base}\logs

C:\opt\myappbase>dir
 Volume in drive C has no label.
 Volume Serial Number is C8CF-820B

 Directory of C:\opt\myappbase

11/21/2013  12:49 PM    <DIR>          .
11/21/2013  12:49 PM    <DIR>          ..
11/21/2013  12:49 PM    <DIR>          logs
11/21/2013  12:49 PM             1,355 start.ini
11/21/2013  12:49 PM    <DIR>          webapps
               1 File(s)          1,355 bytes
               4 Dir(s)  306,711,064,576 bytes free
....

At this point you have configured your `C:\opt\myappbase` to enable the following modules:

deploy::
This is the module that will perform deployment of web applications (WAR files or exploded directories), or Jetty IoC XML context deployables, from the `C:\opt\myappbase\webapps` directory.
http::
This sets up a single Connector that listens for basic HTTP requests.
+
See the created `start.ini` for configuring this connector.
logging::
When running Jetty as a service it is very important to have logging enabled.
This module will enable the basic STDOUT and STDERR capture logging to the `C:\opt\myappbase\logs` directory.

See the section on xref:start-jar[] for more details and options on setting up and configuring a `${jetty.base}` directory.

At this point you merely have to copy your WAR files into the `{$jetty.base}/webapps` directory.

[source, screen, subs="{sub-order}"]
....
C:\opt\myappbase> copy C:\projects\mywebsite.war webapps\
....

At this point you should have your directories, Java, the Jetty distribution, and your webapp specifics setup and ready for operation.

We will use the https://commons.apache.org/proper/commons-daemon/binaries.html[Apache ProcRun's prunsrv.exe] to install a Jetty Service.

The basic command line syntax is outlined in the link above.

A example `install-jetty-service.bat` is provided here as an example, based on the above directories.

[source,bat]
----
@echo off
set SERVICE_NAME=JettyService
set JETTY_HOME=C:\opt\jetty
set JETTY_BASE=C:\opt\myappbase
set STOPKEY=secret
set STOPPORT=50001

set PR_INSTALL=C:\opt\prunsrv.exe

@REM Service Log Configuration
set PR_LOGPREFIX=%SERVICE_NAME%
set PR_LOGPATH=C:\opt\logs
set PR_STDOUTPUT=auto
set PR_STDERROR=auto
set PR_LOGLEVEL=Debug

@REM Path to Java Installation
set JAVA_HOME=C:\Program Files\Java\jdk1.7.0_45
set PR_JVM=%JAVA_HOME%\jre\bin\server\jvm.dll
set PR_CLASSPATH=%JETTY_HOME%\start.jar;%JAVA_HOME%\lib\tools.jar

@REM JVM Configuration
set PR_JVMMS=128
set PR_JVMMX=512
set PR_JVMSS=4000
set PR_JVMOPTIONS=-Duser.dir="%JETTY_BASE%";-Djava.io.tmpdir="C:\opt\temp";-Djetty.home="%JETTY_HOME%";-Djetty.base="%JETTY_BASE%"
@REM Startup Configuration
set JETTY_START_CLASS=org.eclipse.jetty.start.Main

set PR_STARTUP=auto
set PR_STARTMODE=java
set PR_STARTCLASS=%JETTY_START_CLASS%
set PR_STARTPARAMS=STOP.KEY="%STOPKEY%";STOP.PORT=%STOPPORT%

@REM Shutdown Configuration
set PR_STOPMODE=java
set PR_STOPCLASS=%JETTY_START_CLASS%
set PR_STOPPARAMS=--stop;STOP.KEY="%STOPKEY%";STOP.PORT=%STOPPORT%;STOP.WAIT=10

"%PR_INSTALL%" //IS/%SERVICE_NAME% ^
  --DisplayName="%SERVICE_NAME%" ^
  --Install="%PR_INSTALL%" ^
  --Startup="%PR_STARTUP%" ^
  --LogPath="%PR_LOGPATH%" ^
  --LogPrefix="%PR_LOGPREFIX%" ^
  --LogLevel="%PR_LOGLEVEL%" ^
  --StdOutput="%PR_STDOUTPUT%" ^
  --StdError="%PR_STDERROR%" ^
  --JavaHome="%JAVA_HOME%" ^
  --Jvm="%PR_JVM%" ^
  --JvmMs="%PR_JVMMS%" ^
  --JvmMx="%PR_JVMMX%" ^
  --JvmSs="%PR_JVMSS%" ^
  --JvmOptions="%PR_JVMOPTIONS%" ^
  --Classpath="%PR_CLASSPATH%" ^
  --StartMode="%PR_STARTMODE%" ^
  --StartClass="%JETTY_START_CLASS%" ^
  --StartParams="%PR_STARTPARAMS%" ^
  --StopMode="%PR_STOPMODE%" ^
  --StopClass="%PR_STOPCLASS%" ^
  --StopParams="%PR_STOPPARAMS%"

if not errorlevel 1 goto installed
echo Failed to install "%SERVICE_NAME%" service.  Refer to log in %PR_LOGPATH%
goto end

:installed
echo The Service "%SERVICE_NAME%" has been installed

:end
----

Configuration's of note in this batch file:

SERVICE_NAME::
This is the name of the service that Windows sees.
The name in the Services window will show this name.
STOPKEY::
This is the secret key (password) for the ShutdownMonitor, used to issue a formal command to stop the server.
STOPPORT::
The port that the Shutdown Monitor listens on for the stop command.
+
If you have multiple Jetty servers on the same machine, this port will need to be different for each Service.

Once you have run `prunsrv.exe //IS/<service-name>` (done for you in the above batch file) to install the service, you can use the standard Windows utilities to manage (start/stop/restart) the Jetty service.

Open the Service View and start your service.

image:images/windows-service-jetty.png[image,width=576]