# Traditional Chinese translation for gettext.
# Copyright (C) 1998, 2001, 2002, 2005 Free Software Foundation, Inc.
# This file is distributed under the same license as the gettext package.
#
# This translation is merged from Simplified Chinese, thanks to the Simplified Chinese
# translation team!
#
# Funda Wang <fundawang@linux.net.cn>, 2004.
# Ji ZhengYu <zhengyuji@gmail.com>, 2015.
# Boyuan Yang <073plan@gmail.com>, 2018.
# Pofeng Lee <pofeng@linux.org.tw>, 2001-2002.
# Yuan-Chung Cheng <platin@ms.ccafps.khc.edu.tw>, 1998.
# Abel Cheung <abelcheung@gmail.com>, 2002, 2005.
# Wei-Lun Chao <bluebat@member.fsf.org>, 2013.
# Yi-Jyun Pan <pan93412@gmail.com>, 2019, 2020.
msgid ""
msgstr ""
"Project-Id-Version: gettext-tools 0.20.2\n"
"Report-Msgid-Bugs-To: bug-gettext@gnu.org\n"
"POT-Creation-Date: 2020-07-26 21:56+0200\n"
"PO-Revision-Date: 2020-04-16 23:51+0800\n"
"Last-Translator: Yi-Jyun Pan <pan93412@gmail.com>\n"
"Language-Team: Chinese (traditional) <zh-l10n@lists.linux.org.tw>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Poedit 2.3\n"

#: gnulib-lib/argmatch.c:132
#, c-format
msgid "invalid argument %s for %s"
msgstr "%2$s 的參數 %1$s 無效"

#: gnulib-lib/argmatch.c:133
#, c-format
msgid "ambiguous argument %s for %s"
msgstr "%2$s 的參數 %1$s 不明確"

#: gnulib-lib/argmatch.c:152
msgid "Valid arguments are:"
msgstr "有效的參數為："

#: gnulib-lib/clean-temp.c:460
#, c-format
msgid "cannot remove temporary file %s"
msgstr "無法刪除暫存檔 %s"

#: gnulib-lib/clean-temp.c:579
#, c-format
msgid "cannot find a temporary directory, try setting $TMPDIR"
msgstr "找不到暫存檔目錄，正嘗試設定 $TMPDIR"

#: gnulib-lib/clean-temp.c:594
#, c-format
msgid "cannot create a temporary directory using template \"%s\""
msgstr "無法根據目錄名稱樣式 %s 建立暫存檔目錄"

#: gnulib-lib/clean-temp.c:711
#, c-format
msgid "cannot remove temporary directory %s"
msgstr "無法刪除暫存目錄 %s"

#: gnulib-lib/closeout.c:66
msgid "write error"
msgstr "寫入時發生錯誤"

# lib/copy-file.c:61 src/file-list.c:57 src/po-lex.c:726 src/read-mo.c:171 src/urlget.c:204 src/xgettext.c:823 src/xgettext.c:836 src/xgettext.c:846 #, c-format
#: gnulib-lib/copy-file.c:192
#, c-format
msgid "error while opening %s for reading"
msgstr "當開啟檔案 %s 準備讀取時發生錯誤"

#: gnulib-lib/copy-file.c:196
#, c-format
msgid "cannot open backup file %s for writing"
msgstr "無法開啟備份檔 %s 寫入內容"

#: gnulib-lib/copy-file.c:200
#, c-format
msgid "error reading %s"
msgstr "讀取 %s 時發生錯誤"

#: gnulib-lib/copy-file.c:204
#, c-format
msgid "error writing %s"
msgstr "寫入 %s 時發生錯誤"

#: gnulib-lib/copy-file.c:208
#, c-format
msgid "error after reading %s"
msgstr "完成讀取 %s 後發生錯誤"

#: gnulib-lib/copy-file.c:215
#, c-format
msgid "preserving permissions for %s"
msgstr "正在保留 %s 的權限"

#: gnulib-lib/csharpcomp.c:202 gnulib-lib/javaversion.c:78 src/msginit.c:955
#: src/msginit.c:1038 src/msginit.c:1207 src/msginit.c:1313 src/msginit.c:1483
#: src/read-csharp.c:72 src/read-java.c:71 src/read-resources.c:73
#: src/read-tcl.c:111 src/write-resources.c:79 src/x-ruby.c:134
#, c-format
msgid "fdopen() failed"
msgstr "fdopen() 失敗"

#: gnulib-lib/csharpcomp.c:443
#, c-format
msgid "C# compiler not found, try installing mono"
msgstr "找不到 C# 編譯器，請安裝 mono"

#: gnulib-lib/csharpexec.c:255
#, c-format
msgid "C# virtual machine not found, try installing mono"
msgstr "找不到 C# 虛擬機，請安裝 mono"

#: gnulib-lib/error.c:195 libgettextpo/error.c:195
msgid "Unknown system error"
msgstr "系統出現未知錯誤"

#: gnulib-lib/execute.c:185 gnulib-lib/execute.c:258
#: gnulib-lib/spawn-pipe.c:235 gnulib-lib/spawn-pipe.c:349
#: gnulib-lib/wait-process.c:290 gnulib-lib/wait-process.c:364
#, c-format
msgid "%s subprocess failed"
msgstr "%s 子行程發生錯誤"

#: gnulib-lib/getopt.c:278
#, c-format
msgid "%s: option '%s%s' is ambiguous\n"
msgstr "%s：選項「%s%s」不明確\n"

#: gnulib-lib/getopt.c:284
#, c-format
msgid "%s: option '%s%s' is ambiguous; possibilities:"
msgstr "%s：選項「%s%s」不明確；可能選項包括："

#: gnulib-lib/getopt.c:319
#, c-format
msgid "%s: unrecognized option '%s%s'\n"
msgstr "%s：無法辨識「%s%s」選項\n"

#: gnulib-lib/getopt.c:345
#, c-format
msgid "%s: option '%s%s' doesn't allow an argument\n"
msgstr "%s：選項「%s%s」不允許參數\n"

#: gnulib-lib/getopt.c:360
#, c-format
msgid "%s: option '%s%s' requires an argument\n"
msgstr "%s：選項「%s%s」需要參數\n"

#: gnulib-lib/getopt.c:621
#, c-format
msgid "%s: invalid option -- '%c'\n"
msgstr "%s：選項無效 -- '%c'\n"

#: gnulib-lib/getopt.c:636 gnulib-lib/getopt.c:682
#, c-format
msgid "%s: option requires an argument -- '%c'\n"
msgstr "%s：選項需要參數 -- '%c'\n"

#: gnulib-lib/javacomp.c:150 gnulib-lib/javacomp.c:174
#: gnulib-lib/javacomp.c:200
#, c-format
msgid "invalid source_version argument to compile_java_class"
msgstr "compile_java_class 有無效的 source_version 參數"

#: gnulib-lib/javacomp.c:221 gnulib-lib/javacomp.c:252
#, c-format
msgid "invalid target_version argument to compile_java_class"
msgstr "compile_java_class 有無效的 target_version 參數"

#: gnulib-lib/javacomp.c:579 src/write-csharp.c:744 src/write-java.c:1145
#: src/write-java.c:1153 src/write-java.c:1181 src/write-java.c:1193
#, c-format
msgid "failed to create \"%s\""
msgstr "無法建立「%s」"

#: gnulib-lib/javacomp.c:586 src/write-catalog.c:256 src/write-catalog.c:329
#: src/write-csharp.c:753 src/write-desktop.c:183 src/write-java.c:1161
#: src/write-java.c:1202 src/write-mo.c:802 src/write-mo.c:824
#: src/write-qt.c:751 src/write-tcl.c:228 src/write-xml.c:76
#, c-format
msgid "error while writing \"%s\" file"
msgstr "當寫入檔案「%s」時發生錯誤"

#: gnulib-lib/javacomp.c:2436
#, c-format
msgid "Java compiler not found, try installing gcj or set $JAVAC"
msgstr "找不到 Java 編譯器，請安裝 gcj 或是設定 $JAVAC 環境變數"

#: gnulib-lib/javaexec.c:417
#, c-format
msgid "Java virtual machine not found, try installing gij or set $JAVA"
msgstr "找不到 Java 虛擬機，請安裝 gij 或是設定 $JAVA 環境變數"

#: gnulib-lib/javaversion.c:86 src/msginit.c:963 src/msginit.c:1046
#: src/msginit.c:1215 src/msginit.c:1491
#, c-format
msgid "%s subprocess I/O error"
msgstr "%s 子行程 I/O 錯誤"

#: gnulib-lib/obstack.c:338 gnulib-lib/obstack.c:340 gnulib-lib/xmalloc.c:38
#: gnulib-lib/xsetenv.c:37 src/msgl-check.c:563 src/po-lex.c:83
#: src/po-lex.c:102 libgettextpo/gettext-po.c:1326 libgettextpo/obstack.c:338
#: libgettextpo/obstack.c:340 libgettextpo/xmalloc.c:38
#, c-format
msgid "memory exhausted"
msgstr "記憶體耗盡"

#: gnulib-lib/pipe-filter-ii.c:313
#, c-format
msgid "creation of threads failed"
msgstr "建立行程失敗"

#: gnulib-lib/pipe-filter-ii.c:345 gnulib-lib/pipe-filter-ii.c:502
#: src/msgexec.c:428
#, c-format
msgid "write to %s subprocess failed"
msgstr "寫入至 %s 子行程時發生錯誤"

#: gnulib-lib/pipe-filter-ii.c:366 gnulib-lib/pipe-filter-ii.c:545
#, c-format
msgid "read from %s subprocess failed"
msgstr "由 %s 子行程讀入資料時出現錯誤"

#: gnulib-lib/pipe-filter-ii.c:419
#, c-format
msgid "cannot set up nonblocking I/O to %s subprocess"
msgstr "無法和 %s 子行程建立非專用的 I/O"

#: gnulib-lib/pipe-filter-ii.c:457
#, c-format
msgid "communication with %s subprocess failed"
msgstr "和 %s 子行程溝通時出現錯誤"

#: gnulib-lib/pipe-filter-ii.c:577
#, c-format
msgid "%s subprocess terminated with exit code %d"
msgstr "%s 子行程已終止，錯誤碼為 %d"

#. TRANSLATORS:
#. Get translations for open and closing quotation marks.
#. The message catalog should translate "`" to a left
#. quotation mark suitable for the locale, and similarly for
#. "'".  For example, a French Unicode local should translate
#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
#. QUOTATION MARK), respectively.
#.
#. If the catalog has no translation, we will try to
#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK).  If the
#. current locale is not Unicode, locale_quoting_style
#. will quote 'like this', and clocale_quoting_style will
#. quote "like this".  You should always include translations
#. for "`" and "'" even if U+2018 and U+2019 are appropriate
#. for your locale.
#.
#. If you don't know what to put here, please see
#. <https://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
#. and use glyphs suitable for your language.
#: gnulib-lib/quotearg.c:355
msgid "`"
msgstr "「"

#: gnulib-lib/quotearg.c:356
msgid "'"
msgstr "」"

#: gnulib-lib/spawn-pipe.c:141 gnulib-lib/spawn-pipe.c:144
#: gnulib-lib/spawn-pipe.c:265 gnulib-lib/spawn-pipe.c:268
#, c-format
msgid "cannot create pipe"
msgstr "無法建立管線"

#: gnulib-lib/w32spawn.h:49
#, c-format
msgid "_open_osfhandle failed"
msgstr "_open_osfhandle 失敗"

#: gnulib-lib/w32spawn.h:90
#, c-format
msgid "cannot restore fd %d: dup2 failed"
msgstr "無法還原 fd %d：dup2 失敗"

#: gnulib-lib/wait-process.c:231 gnulib-lib/wait-process.c:263
#: gnulib-lib/wait-process.c:325
#, c-format
msgid "%s subprocess"
msgstr "%s 子行程"

#: gnulib-lib/wait-process.c:282 gnulib-lib/wait-process.c:354
#, c-format
msgid "%s subprocess got fatal signal %d"
msgstr "%s 子行程取得嚴重錯誤訊號 %d"

#: src/cldr-plurals.c:61
#, c-format
msgid "Could not parse file %s as XML"
msgstr "無法將 %s 解析成 XML 檔案"

#: src/cldr-plurals.c:69
#, c-format
msgid "The root element must be <%s>"
msgstr "根元素必須為 <%s>"

#: src/cldr-plurals.c:82
#, c-format
msgid "The element <%s> does not contain a <%s> element"
msgstr "元素 <%s> 未包含 <%s> 元素"

#: src/cldr-plurals.c:104 src/cldr-plurals.c:144
#, c-format
msgid "The element <%s> does not have attribute <%s>"
msgstr "元素 <%s> 未包含 <%s> 屬性"

#: src/cldr-plurals.c:188 src/hostname.c:206 src/msgattrib.c:415
#: src/msgcat.c:360 src/msgcmp.c:206 src/msgcomm.c:352 src/msgconv.c:301
#: src/msgen.c:298 src/msgexec.c:256 src/msgfilter.c:407 src/msgfmt.c:900
#: src/msggrep.c:506 src/msginit.c:405 src/msgmerge.c:534 src/msgunfmt.c:421
#: src/msguniq.c:320 src/recode-sr-latin.c:140 src/urlget.c:169
#: src/xgettext.c:1047
#, c-format
msgid "Try '%s --help' for more information.\n"
msgstr "執行「%s --help」取得更多資訊。\n"

#: src/cldr-plurals.c:192
#, c-format
msgid "Usage: %s [OPTION...] [LOCALE RULES]...\n"
msgstr "用法：%s [選項…] [語言規則]…\n"

#: src/cldr-plurals.c:197
#, c-format, no-wrap
msgid ""
"Extract or convert Unicode CLDR plural rules.\n"
"\n"
"If both LOCALE and RULES are specified, it reads CLDR plural rules for\n"
"LOCALE from RULES and print them in a form suitable for gettext use.\n"
"If no argument is given, it reads CLDR plural rules from the standard input.\n"
msgstr ""
"擷取或轉換 Unicode CLDR 複數規則。\n"
"\n"
"如果同時指定了 <語系> 和 <規則>，程式將從給定 <規則> 中讀取指定 <語系> 的\n"
"CLDR 複數規則，並將其輸出為適合 gettext 使用的表格。\n"
"如果沒有給定參數，程式將從標準輸入讀取 CLDR 複數規則。\n"

#: src/cldr-plurals.c:206 src/msgfmt.c:913 src/xgettext.c:1060
#, c-format, no-wrap
msgid ""
"Mandatory arguments to long options are mandatory for short options too.\n"
"Similarly for optional arguments.\n"
msgstr "長選項必要的參數在使用短選項時也是必要的。對於選擇性的參數也一樣。\n"

#: src/cldr-plurals.c:211
#, c-format
msgid "  -c, --cldr                  print plural rules in the CLDR format\n"
msgstr "  -c, --cldr                  使用 CLDR 格式顯示出複數規則\n"

#: src/cldr-plurals.c:213 src/hostname.c:229 src/msgattrib.c:534
#: src/msgcat.c:468 src/msgcmp.c:257 src/msgcomm.c:454 src/msgconv.c:385
#: src/msgen.c:381 src/msgexec.c:305 src/msgfilter.c:507 src/msgfmt.c:1066
#: src/msggrep.c:624 src/msginit.c:469 src/msgmerge.c:664 src/msgunfmt.c:527
#: src/msguniq.c:417 src/recode-sr-latin.c:161 src/urlget.c:185
#: src/xgettext.c:1235
#, c-format, no-wrap
msgid "  -h, --help                  display this help and exit\n"
msgstr "  -h, --help                  顯示本訊息，然後結束\n"

#: src/cldr-plurals.c:215 src/hostname.c:231 src/msgattrib.c:536
#: src/msgcat.c:470 src/msgcmp.c:259 src/msgcomm.c:456 src/msgconv.c:387
#: src/msgen.c:383 src/msgexec.c:307 src/msgfilter.c:509 src/msgfmt.c:1068
#: src/msggrep.c:626 src/msginit.c:471 src/msgmerge.c:666 src/msgunfmt.c:529
#: src/msguniq.c:419 src/recode-sr-latin.c:164 src/urlget.c:187
#: src/xgettext.c:1237
#, c-format, no-wrap
msgid "  -V, --version               output version information and exit\n"
msgstr "  -V, --version               顯示版本資訊，然後結束\n"

#. TRANSLATORS: The first placeholder is the web address of the Savannah
#. project of this package.  The second placeholder is the bug-reporting
#. email address for this package.  Please add _another line_ saying
#. "Report translation bugs to <...>\n" with the address for translation
#. bugs (typically your translation team's web or email address).
#: src/cldr-plurals.c:223 src/hostname.c:239 src/msgattrib.c:544
#: src/msgcat.c:478 src/msgcmp.c:267 src/msgcomm.c:464 src/msgconv.c:395
#: src/msgen.c:391 src/msgexec.c:315 src/msgfilter.c:517 src/msgfmt.c:1080
#: src/msggrep.c:634 src/msginit.c:479 src/msgmerge.c:678 src/msgunfmt.c:539
#: src/msguniq.c:427 src/recode-sr-latin.c:172 src/urlget.c:197
#: src/xgettext.c:1247
#, c-format
msgid ""
"Report bugs in the bug tracker at <%s>\n"
"or by email to <%s>.\n"
msgstr ""
"請在位於 <%s> 的臭蟲追蹤系統回報臭蟲\n"
"或寄電子郵件至 <%s>。\n"

#: src/cldr-plurals.c:292 src/hostname.c:177 src/msgattrib.c:353
#: src/msgcat.c:291 src/msgcmp.c:169 src/msgcomm.c:282 src/msgconv.c:242
#: src/msgen.c:239 src/msgexec.c:183 src/msgfilter.c:286 src/msgfmt.c:442
#: src/msggrep.c:413 src/msginit.c:269 src/msgmerge.c:370 src/msgunfmt.c:260
#: src/msguniq.c:262 src/recode-sr-latin.c:107 src/urlget.c:140
#: src/xgettext.c:686
#, c-format, no-wrap
msgid ""
"Copyright (C) %s Free Software Foundation, Inc.\n"
"License GPLv3+: GNU GPL version 3 or later <%s>\n"
"This is free software: you are free to change and redistribute it.\n"
"There is NO WARRANTY, to the extent permitted by law.\n"
msgstr ""
"著作權所有 (C) %s 自由軟體基金會\n"
"GPLv3+ 授權：GNU GPL 第三版或更新版本 <%s>。\n"
"此為自由軟體：您能修改與重散布它。\n"
"在法律允許的範圍內沒有任何擔保。\n"

#: src/cldr-plurals.c:298 src/hostname.c:183 src/msgattrib.c:359
#: src/msgcat.c:297 src/msgcmp.c:175 src/msgcomm.c:288 src/msgconv.c:248
#: src/msgen.c:245 src/msgexec.c:189 src/msgfilter.c:292 src/msgfmt.c:448
#: src/msggrep.c:419 src/msginit.c:275 src/msgmerge.c:376 src/msgunfmt.c:266
#: src/msguniq.c:268 src/urlget.c:146 src/xgettext.c:692
#, c-format
msgid "Written by %s.\n"
msgstr "由 %s 編寫。\n"

#. This is a proper name. See the gettext manual, section Names.
#: src/cldr-plurals.c:298
msgid "Daiki Ueno"
msgstr "Daiki Ueno"

#: src/cldr-plurals.c:318
#, c-format
msgid "%s cannot be read"
msgstr "無法讀取 %s"

#: src/cldr-plurals.c:324
#, c-format
msgid "cannot extract rules for %s"
msgstr "無法擷取 %s 的規則"

#: src/cldr-plurals.c:334
#, c-format
msgid "cannot parse CLDR rule"
msgstr "無法解析 CLDR 規則"

#: src/cldr-plurals.c:369
#, c-format
msgid "extra operand %s"
msgstr "額外的運算元 %s"

# lib/copy-file.c:61 src/file-list.c:57 src/po-lex.c:726 src/read-mo.c:171 src/urlget.c:204 src/xgettext.c:823 src/xgettext.c:836 src/xgettext.c:846 #, c-format
#: src/file-list.c:53 src/msggrep.c:241 src/open-catalog.c:124
#: src/read-mo.c:270 src/read-tcl.c:126 src/urlget.c:217
#: src/write-desktop.c:173 src/xgettext.c:1755 src/xgettext.c:1764
#: src/xgettext.c:1780 src/xgettext.c:1812 src/xgettext.c:1822
#: src/xgettext.c:1839
#, c-format
msgid "error while opening \"%s\" for reading"
msgstr "當開啟檔案 %s 準備讀取時發生錯誤"

#: src/format-awk.c:509 src/format-boost.c:617 src/format-elisp.c:348
#: src/format-gcc-internal.c:627 src/format-java-printf.c:580
#: src/format-javascript.c:355 src/format-kde.c:223 src/format-librep.c:312
#: src/format-lua.c:228 src/format-pascal.c:396 src/format-perl.c:582
#: src/format-php.c:348 src/format-qt.c:173 src/format-smalltalk.c:147
#: src/format-tcl.c:390
#, c-format
msgid ""
"a format specification for argument %u, as in '%s', doesn't exist in '%s'"
msgstr "第 %u 個參數的格式規範，如同「%s」，未在「%s」出現"

#: src/format-awk.c:520 src/format-boost.c:628 src/format-elisp.c:359
#: src/format-gcc-internal.c:638 src/format-java-printf.c:591
#: src/format-javascript.c:366 src/format-kde.c:234 src/format-librep.c:323
#: src/format-lua.c:235 src/format-pascal.c:407 src/format-perl.c:593
#: src/format-php.c:359 src/format-qt.c:170 src/format-smalltalk.c:144
#: src/format-tcl.c:401
#, c-format
msgid "a format specification for argument %u doesn't exist in '%s'"
msgstr "第 %u 個參數的規格在「%s」中並不存在"

#: src/format-awk.c:540 src/format-boost.c:648 src/format-c.c:146
#: src/format-elisp.c:379 src/format-gcc-internal.c:658
#: src/format-gfc-internal.c:372 src/format-java-printf.c:611
#: src/format-javascript.c:389 src/format-librep.c:343 src/format-lua.c:242
#: src/format-pascal.c:427 src/format-perl.c:613 src/format-php.c:379
#: src/format-python.c:527 src/format-ruby.c:959 src/format-tcl.c:421
#, c-format
msgid "format specifications in '%s' and '%s' for argument %u are not the same"
msgstr "「%1$s」中的格式規範和傳給第 %3$u 個參數的「%2$s」不同"

#: src/format-boost.c:449
#, c-format
msgid "The directive number %u starts with | but does not end with |."
msgstr "指令編碼 %u 以 | 開頭卻不以 | 結尾。"

#: src/format.c:154
#, c-format
msgid "'%s' is not a valid %s format string, unlike '%s'. Reason: %s"
msgstr "「%s」不是個有效的 %s 格式字串，因為不像「%s」。原因：%s"

#: src/format-c.c:36
#, c-format
msgid ""
"In the directive number %u, the token after '<' is not the name of a format "
"specifier macro. The valid macro names are listed in ISO C 99 section 7.8.1."
msgstr ""
"在第 %u 條指令，'<' 之後的關鍵字不是正確的變數規格。如果想得知正確的變數規格"
"名稱，請參考 ISO C 99 規格第 7.8.1 節。"

#: src/format-c.c:39
#, c-format
msgid "In the directive number %u, the token after '<' is not followed by '>'."
msgstr "在第 %u 條指令中，「<」之後的關鍵字後面缺少了「>」。"

#: src/format-c.c:42 src/format-gfc-internal.c:289
#, c-format
msgid "The string refers to argument number %u but ignores argument number %u."
msgstr "字串中有提及第 %u 個參數，但忽略了第 %u 個。"

#: src/format-c.c:137 src/format-csharp.c:203 src/format-gfc-internal.c:363
#: src/format-python.c:515 src/format-qt-plural.c:110 src/format-ruby.c:950
#, c-format
msgid "number of format specifications in '%s' and '%s' does not match"
msgstr "「%s」中的格式規範數與「%s」不符"

#: src/format-csharp.c:85 src/format-java.c:206
#, c-format
msgid "In the directive number %u, '{' is not followed by an argument number."
msgstr "第 %u 條指令中，「{」後沒有參數編號。"

#: src/format-csharp.c:106
#, c-format
msgid "In the directive number %u, ',' is not followed by a number."
msgstr "在第 %u 條指令，「,」後面接的不是數字。"

#: src/format-csharp.c:127 src/format-java.c:192
msgid ""
"The string ends in the middle of a directive: found '{' without matching '}'."
msgstr "字串在指令中間結束：發現了「{」但沒有對稱的「}」。"

#: src/format-csharp.c:136
#, c-format
msgid ""
"The directive number %u ends with an invalid character '%c' instead of '}'."
msgstr "第 %u 條指令結束的字元是「%c」而不是「}」。"

#: src/format-csharp.c:137
#, c-format
msgid "The directive number %u ends with an invalid character instead of '}'."
msgstr "第 %u 條指令結束的不是「}」，而是不合法的字元。"

#: src/format-csharp.c:158 src/format-java.c:347
msgid ""
"The string starts in the middle of a directive: found '}' without matching "
"'{'."
msgstr "字串在指令中間開始：發現了「}」但沒有對稱的「{」。"

#: src/format-csharp.c:159
#, c-format
msgid "The string contains a lone '}' after directive number %u."
msgstr "第 %u 條指令後出現單獨的「}」。"

#: src/format-gcc-internal.c:255
#, c-format
msgid "In the directive number %u, the flags combination is invalid."
msgstr "指令編碼 %u 中的旗標組合無效。"

#: src/format-gcc-internal.c:292
#, c-format
msgid "In the directive number %u, a precision is not allowed before '%c'."
msgstr "指令編碼 %u 中的精度不允許在「%c」之前出現。"

#: src/format-gcc-internal.c:334
#, c-format
msgid ""
"In the directive number %u, the argument number for the precision must be "
"equal to %u."
msgstr "第 %u 條指令中，精度的參數個數必須是 %u 個。"

#: src/format-gcc-internal.c:398
#, c-format
msgid ""
"In the directive number %u, a precision specification is not allowed before "
"'%c'."
msgstr "第 %u 條指令中，「%c」前不允許指定精度。"

#: src/format-gcc-internal.c:406
#, c-format
msgid "In the directive number %u, the precision specification is invalid."
msgstr "第 %u 條指令中，精度指定無效。"

#: src/format-gcc-internal.c:463
#, c-format
msgid "In the directive number %u, flags are not allowed before '%c'."
msgstr "第 %u 條指令中，「%c」前不允許帶有旗標。"

#: src/format-gcc-internal.c:677
#, c-format
msgid "'%s' uses %%m but '%s' doesn't"
msgstr "「%s」使用了 %%m，但「%s」沒有使用"

#: src/format-gcc-internal.c:680
#, c-format
msgid "'%s' does not use %%m but '%s' uses %%m"
msgstr "「%s」未使用 %%m，但「%s」卻使用了 %%m"

#: src/format-gfc-internal.c:383
#, c-format
msgid "'%s' uses %%C but '%s' doesn't"
msgstr "「%s」要用 %%C，但「%s」沒有"

#: src/format-gfc-internal.c:386
#, c-format
msgid "'%s' does not use %%C but '%s' uses %%C"
msgstr "「%s」沒有使用 %%C，但「%s」要用 %%C"

#: src/format-invalid.h:22
msgid "The string ends in the middle of a directive."
msgstr "在指令中間，字串突然結束。"

#: src/format-invalid.h:25
msgid ""
"The string refers to arguments both through absolute argument numbers and "
"through unnumbered argument specifications."
msgstr "字串中同時出現了有硬性規定和沒有硬性規定位置的參數。"

#: src/format-invalid.h:28
#, c-format
msgid ""
"In the directive number %u, the argument number 0 is not a positive integer."
msgstr "第 %u 條指令中的數字 0 不是正整數。"

#: src/format-invalid.h:30
#, c-format
msgid ""
"In the directive number %u, the width's argument number 0 is not a positive "
"integer."
msgstr "第 %u 條指令中，寬度的第 0 個參數不是正整數。"

#: src/format-invalid.h:32
#, c-format
msgid ""
"In the directive number %u, the precision's argument number 0 is not a "
"positive integer."
msgstr "第 %u 條指令中，精度的第 0 個參數不是正整數。"

#: src/format-invalid.h:36
#, c-format
msgid ""
"In the directive number %u, the character '%c' is not a valid conversion "
"specifier."
msgstr "第 %u 條指令的「%c」字元屬於無效的轉換格式。"

#: src/format-invalid.h:37
#, c-format
msgid ""
"The character that terminates the directive number %u is not a valid "
"conversion specifier."
msgstr "用來結束第 %u 條指令的字元屬於無效的轉換格式。"

#: src/format-invalid.h:40
#, c-format
msgid "The string refers to argument number %u in incompatible ways."
msgstr "字串採用了不相容的方法來表示第 %u 個參數。"

#: src/format-java.c:241
#, c-format
msgid ""
"In the directive number %u, the substring \"%s\" is not a valid date/time "
"style."
msgstr "第 %u 條指令的子字串「%s」的日期/時間格式無效。"

#: src/format-java.c:252 src/format-java.c:286 src/format-java.c:315
#, c-format
msgid "In the directive number %u, \"%s\" is not followed by a comma."
msgstr "第 %u 條指令的 %s 後面缺少逗號。"

#: src/format-java.c:275
#, c-format
msgid ""
"In the directive number %u, the substring \"%s\" is not a valid number style."
msgstr "第 %u 條指令的子字串 %s 是無效的數字格式。"

#: src/format-java.c:324
#, c-format
msgid ""
"In the directive number %u, the argument number is not followed by a comma "
"and one of \"%s\", \"%s\", \"%s\", \"%s\"."
msgstr ""
"第 %u 條指令中，參數編號後面沒有逗號和其中一個「%s」、「%s」、「%s」、「%s」"
"字串。"

#: src/format-java.c:573
#, c-format
msgid "In the directive number %u, a choice contains no number."
msgstr "第 %u 條指令中，選擇不包含數字。"

#: src/format-java.c:584
#, c-format
msgid ""
"In the directive number %u, a choice contains a number that is not followed "
"by '<', '#' or '%s'."
msgstr "第 %u 條指令中，選擇包含的數字後面沒有「<」、「#」或「%s」。"

#: src/format-java.c:746
#, c-format
msgid ""
"a format specification for argument {%u}, as in '%s', doesn't exist in '%s'"
msgstr "參數 {%u}（如同「%s」）的格式規範在「%s」中不存在"

#: src/format-java.c:757
#, c-format
msgid "a format specification for argument {%u} doesn't exist in '%s'"
msgstr "參數 {%u} 的規格在「%s」中並不存在"

#: src/format-java.c:777
#, c-format
msgid ""
"format specifications in '%s' and '%s' for argument {%u} are not the same"
msgstr "參數 {%3$u} 在「%1$s」和「%2$s」中的格式規範不相同"

#: src/format-java-printf.c:139
#, fuzzy, c-format
#| msgid "In the directive number %u, the precision specification is invalid."
msgid ""
"In the directive number %u, the reference to the argument of the previous "
"directive is invalid."
msgstr "第 %u 條指令中，精度指定無效。"

#: src/format-java-printf.c:142
#, fuzzy, c-format
#| msgid "In the directive number %u, the precision specification is invalid."
msgid "In the directive number %u, the precision is missing."
msgstr "第 %u 條指令中，精度指定無效。"

#: src/format-java-printf.c:145
#, fuzzy, c-format
#| msgid ""
#| "In the directive number %u, the character '%c' is not a valid conversion "
#| "specifier."
msgid ""
"In the directive number %u, the flag '%c' is invalid for the conversion '%c'."
msgstr "第 %u 條指令的「%c」字元屬於無效的轉換格式。"

#: src/format-java-printf.c:148
#, fuzzy, c-format
#| msgid "In the directive number %u, a precision is not allowed before '%c'."
msgid "In the directive number %u, a width is invalid for the conversion '%c'."
msgstr "指令編碼 %u 中的精度不允許在「%c」之前出現。"

#: src/format-java-printf.c:151
#, fuzzy, c-format
#| msgid "In the directive number %u, a precision is not allowed before '%c'."
msgid ""
"In the directive number %u, a precision is invalid for the conversion '%c'."
msgstr "指令編碼 %u 中的精度不允許在「%c」之前出現。"

#: src/format-java-printf.c:155
#, fuzzy, c-format
#| msgid ""
#| "In the directive number %u, the character '%c' is not a valid conversion "
#| "specifier."
msgid ""
"In the directive number %u, for the conversion '%c', the character '%c' is "
"not a valid conversion suffix."
msgstr "第 %u 條指令的「%c」字元屬於無效的轉換格式。"

#: src/format-java-printf.c:156
#, fuzzy, c-format
#| msgid ""
#| "The character that terminates the directive number %u is not a valid "
#| "conversion specifier."
msgid ""
"The character that terminates the directive number %u, for the conversion "
"'%c', is not a valid conversion suffix."
msgstr "用來結束第 %u 條指令的字元屬於無效的轉換格式。"

#: src/format-kde.c:158
#, c-format
msgid ""
"The string refers to argument number %u but ignores the arguments %u and %u."
msgstr "字串引用了第 %u 個參數但是卻忽略了第 %u 個和第 %u 個參數。"

#: src/format-kde.c:242
#, c-format
msgid ""
"a format specification for arguments %u and %u doesn't exist in '%s', only "
"one argument may be ignored"
msgstr "參數 %u 和 %u 的格式定義在「%s」中不存在，僅可忽略一個參數"

#: src/format-kde-kuit.c:244 src/format-kde-kuit.c:264
#: src/format-kde-kuit.c:274
#, c-format
msgid "error while parsing: %s"
msgstr "處理該項目時發生錯誤: %s"

#: src/format-lisp.c:2340 src/format-lisp.c:2352 src/format-scheme.c:2365
#: src/format-scheme.c:2377
#, c-format
msgid ""
"In the directive number %u, parameter %u is of type '%s' but a parameter of "
"type '%s' is expected."
msgstr "第 %u 條指令中，第 %u 個參數類型為「%s」，但應為「%s」。"

#: src/format-lisp.c:2375 src/format-scheme.c:2400
#, c-format
msgid ""
"In the directive number %u, too many parameters are given; expected at most "
"%u parameter."
msgid_plural ""
"In the directive number %u, too many parameters are given; expected at most "
"%u parameters."
msgstr[0] "第 %u 條指令中，給出的參數太多；最多只需要 %u 個參數。"

#: src/format-lisp.c:2499 src/format-scheme.c:2501
#, c-format
msgid "In the directive number %u, '%c' is not followed by a digit."
msgstr "第 %u 條指令中，「%c」後面未接數字。"

#: src/format-lisp.c:2739 src/format-scheme.c:2756
#, c-format
msgid "In the directive number %u, the argument %d is negative."
msgstr "第 %u 條指令中，參數 %d 為負數。"

#: src/format-lisp.c:2808
msgid "The string ends in the middle of a ~/.../ directive."
msgstr "字串在 ~/…/ 指令中間中斷。"

#: src/format-lisp.c:2846 src/format-lisp.c:3111 src/format-lisp.c:3228
#: src/format-lisp.c:3288 src/format-lisp.c:3400 src/format-scheme.c:2842
#: src/format-scheme.c:3107 src/format-scheme.c:3224 src/format-scheme.c:3322
#, c-format
msgid "Found '~%c' without matching '~%c'."
msgstr "找到「~%c」但沒有對應的「~%c」。"

#: src/format-lisp.c:2866 src/format-scheme.c:2862
#, c-format
msgid "In the directive number %u, both the @ and the : modifiers are given."
msgstr "第 %u 條指令中，同時給出了 @ 和 : 修飾詞。"

#: src/format-lisp.c:2979 src/format-scheme.c:2975
#, c-format
msgid ""
"In the directive number %u, '~:[' is not followed by two clauses, separated "
"by '~;'."
msgstr "第 %u 條指令中，「~:[」後面沒有兩個用「~;」分隔的子句。"

#: src/format-lisp.c:3329 src/format-scheme.c:3265
#, c-format
msgid "In the directive number %u, '~;' is used in an invalid position."
msgstr "第 %u 條指令中，「~;」的位置無效。"

#: src/format-lisp.c:3435 src/format-scheme.c:3357
msgid "The string refers to some argument in incompatible ways."
msgstr "字串引用某些參數的方式不相容。"

#: src/format-lisp.c:3477 src/format-scheme.c:3399
#, c-format
msgid "format specifications in '%s' and '%s' are not equivalent"
msgstr "「%s」和「%s」中的格式規範不同"

#: src/format-lisp.c:3493 src/format-scheme.c:3415
#, c-format
msgid "format specifications in '%s' are not a subset of those in '%s'"
msgstr "「%s」中的格式規範不是「%s」格式規範的子集"

#: src/format-perl-brace.c:199 src/format-python-brace.c:442
#: src/format-python-brace.c:455 src/format-python.c:471 src/format-ruby.c:909
#: src/format-sh.c:308
#, c-format
msgid "a format specification for argument '%s' doesn't exist in '%s'"
msgstr "格式「%s」的規格在「%s」中並不存在"

#: src/format-perl.c:432
#, c-format
msgid ""
"In the directive number %u, the size specifier is incompatible with the "
"conversion specifier '%c'."
msgstr "第 %u 條指令中，大小指定符與轉換指定符「%c」不相容。"

#: src/format-python-brace.c:138
#, c-format
msgid "In the directive number %u, '%c' cannot start a field name."
msgstr "第 %u 條指令中，「%c」不可以欄位名稱 (field name) 開始。"

#: src/format-python-brace.c:157
#, c-format
msgid "In the directive number %u, '%c' cannot start a getattr argument."
msgstr "第 %u 條指令中，「%c」不可以 getattr 參數開始。"

#: src/format-python-brace.c:171
#, c-format
msgid "In the directive number %u, '%c' cannot start a getitem argument."
msgstr "第 %u 條指令中，「%c」不可以 getitem 參數開始。"

#: src/format-python-brace.c:193
#, c-format
msgid ""
"In the directive number %u, no more nesting is allowed in a format specifier."
msgstr "第 %u 條指令中，格式定義中不允許過多巢狀。"

#: src/format-python-brace.c:278
#, c-format
msgid "In the directive number %u, there is an unterminated format directive."
msgstr "第 %u 條指令中，格式指令中無終止字元。"

#: src/format-python.c:114 src/format-ruby.c:131
msgid ""
"The string refers to arguments both through argument names and through "
"unnamed argument specifications."
msgstr "字串同時使用兩種方式引用了參數：透過參數名稱和未命名參數指定符號。"

#: src/format-python.c:354 src/format-ruby.c:792
#, c-format
msgid "The string refers to the argument named '%s' in incompatible ways."
msgstr "字串對名為「%s」的參數引用方式不相容。"

#: src/format-python.c:430
#, c-format
msgid ""
"format specifications in '%s' expect a mapping, those in '%s' expect a tuple"
msgstr "「%s」中的格式規範需要映射，而「%s」中的格式規範需要元組"

#: src/format-python.c:437
#, c-format
msgid ""
"format specifications in '%s' expect a tuple, those in '%s' expect a mapping"
msgstr "「%s」中的格式規範需要元組，而「%s」中的格式規範需要映射"

#: src/format-python.c:460 src/format-ruby.c:898 src/format-sh.c:297
#, c-format
msgid ""
"a format specification for argument '%s', as in '%s', doesn't exist in '%s'"
msgstr "參數「%s」（如同「%s」）的格式規範在「%s」中不存在"

#: src/format-python.c:494 src/format-ruby.c:929
#, c-format
msgid ""
"format specifications in '%s' and '%s' for argument '%s' are not the same"
msgstr "「%s」和「%s」中對參數「%s」的格式規範不同"

#: src/format-qt.c:152
#, c-format
msgid ""
"'%s' is a simple format string, but '%s' is not: it contains an 'L' flag or "
"a double-digit argument number"
msgstr ""
"'%s' 僅僅是個格式字串，但「%s」不是：其包含一個「L」旗標或是一個兩位數的參數"
"號碼"

#: src/format-ruby.c:134
#, fuzzy, c-format
#| msgid ""
#| "In the directive number %u, too many parameters are given; expected at "
#| "most %u parameter."
#| msgid_plural ""
#| "In the directive number %u, too many parameters are given; expected at "
#| "most %u parameters."
msgid "In the directive number %u, two names are given for the same argument."
msgstr "第 %u 條指令中，給出的參數太多；最多只需要 %u 個參數。"

#: src/format-ruby.c:137
#, fuzzy, c-format
#| msgid ""
#| "In the directive number %u, too many parameters are given; expected at "
#| "most %u parameter."
#| msgid_plural ""
#| "In the directive number %u, too many parameters are given; expected at "
#| "most %u parameters."
msgid ""
"In the directive number %u, two numbers are given for the same argument."
msgstr "第 %u 條指令中，給出的參數太多；最多只需要 %u 個參數。"

#: src/format-ruby.c:140
#, fuzzy, c-format
#| msgid "In the directive number %u, the flags combination is invalid."
msgid "In the directive number %u, a flag is given after the width."
msgstr "指令編碼 %u 中的旗標組合無效。"

#: src/format-ruby.c:143
#, fuzzy, c-format
#| msgid "In the directive number %u, the flags combination is invalid."
msgid "In the directive number %u, a flag is given after the precision."
msgstr "指令編碼 %u 中的旗標組合無效。"

#: src/format-ruby.c:146
#, fuzzy, c-format
#| msgid ""
#| "In the directive number %u, the width's argument number 0 is not a "
#| "positive integer."
msgid "In the directive number %u, the width is given after the precision."
msgstr "第 %u 條指令中，寬度的第 0 個參數不是正整數。"

#: src/format-ruby.c:149
#, fuzzy, c-format
#| msgid "In the directive number %u, the argument %d is negative."
msgid "In the directive number %u, a width is given twice."
msgstr "第 %u 條指令中，參數 %d 為負數。"

#: src/format-ruby.c:152
#, fuzzy, c-format
#| msgid "In the directive number %u, a precision is not allowed before '%c'."
msgid "In the directive number %u, a precision is given twice."
msgstr "指令編碼 %u 中的精度不允許在「%c」之前出現。"

#: src/format-ruby.c:868
#, fuzzy, c-format
#| msgid ""
#| "format specifications in '%s' expect a tuple, those in '%s' expect a "
#| "mapping"
msgid ""
"format specifications in '%s' expect a hash table, those in '%s' expect "
"individual arguments"
msgstr "「%s」中的格式規範需要元組，而「%s」中的格式規範需要映射"

#: src/format-ruby.c:875
#, fuzzy, c-format
#| msgid ""
#| "format specifications in '%s' expect a mapping, those in '%s' expect a "
#| "tuple"
msgid ""
"format specifications in '%s' expect individual arguments, those in '%s' "
"expect a hash table"
msgstr "「%s」中的格式規範需要映射，而「%s」中的格式規範需要元組"

#: src/format-sh.c:78
msgid "The string refers to a shell variable with a non-ASCII name."
msgstr "字串中的 shell 變數名稱含有不屬於 ASCII 的字元。"

#: src/format-sh.c:80
msgid ""
"The string refers to a shell variable with complex shell brace syntax. This "
"syntax is unsupported here due to security reasons."
msgstr ""
"字串中的 shell 變數名稱含有較複雜的括號格式，因安全考量，這種格式不會支援。"

#: src/format-sh.c:82
msgid ""
"The string refers to a shell variable whose value may be different inside "
"shell functions."
msgstr "字串引用的 shell 變數值可能在 shell 函數中有所不同。"

#: src/format-sh.c:84
msgid "The string refers to a shell variable with an empty name."
msgstr "字串中的 shell 變數沒有名稱。"

#: src/format-smalltalk.c:90
#, c-format
msgid ""
"In the directive number %u, the character '%c' is not a digit between 1 and "
"9."
msgstr "第 %u 條指令的字元「%c」不是 1 至 9 之間的整數。"

#: src/format-smalltalk.c:91
#, c-format
msgid ""
"The character that terminates the directive number %u is not a digit between "
"1 and 9."
msgstr "第 %u 條指令最後一個字元不是 1 至 9 之間的整數。"

#. This is a proper name. See the gettext manual, section Names.
#: src/hostname.c:183 src/msgattrib.c:359 src/msgcat.c:297 src/msgconv.c:248
#: src/msgen.c:245 src/msgexec.c:189 src/msgfilter.c:292 src/msggrep.c:419
#: src/msginit.c:275 src/msguniq.c:268 src/recode-sr-latin.c:118
#: src/urlget.c:146
msgid "Bruno Haible"
msgstr "Bruno Haible"

#: src/hostname.c:193 src/msginit.c:285 src/recode-sr-latin.c:127
#, c-format
msgid "too many arguments"
msgstr "參數過多"

#: src/hostname.c:210 src/msginit.c:409 src/recode-sr-latin.c:145
#, c-format, no-wrap
msgid "Usage: %s [OPTION]\n"
msgstr "用法：%s [選項]\n"

#: src/hostname.c:214
#, c-format
msgid "Print the machine's hostname.\n"
msgstr "顯示主機的主機名稱 (hostname)。\n"

#: src/hostname.c:217
#, c-format
msgid "Output format:\n"
msgstr "輸出格式：\n"

#: src/hostname.c:219
#, c-format
msgid "  -s, --short                 short host name\n"
msgstr "  -s, --short                 短主機名稱\n"

#: src/hostname.c:221
#, c-format
msgid ""
"  -f, --fqdn, --long          long host name, includes fully qualified "
"domain\n"
"                                name, and aliases\n"
msgstr ""
"  -f, --fqdn, --long          長的主機名稱，包括正式的網域名稱 (FQDN) 及別"
"名\n"

#: src/hostname.c:224
#, c-format
msgid "  -i, --ip-address            addresses for the hostname\n"
msgstr "  -i, --ip-address            主機的 IP 地址\n"

#: src/hostname.c:227 src/msgattrib.c:532 src/msgcat.c:466 src/msgcmp.c:255
#: src/msgcomm.c:452 src/msgconv.c:383 src/msgen.c:379 src/msgexec.c:303
#: src/msgfilter.c:505 src/msgfmt.c:1064 src/msggrep.c:622 src/msginit.c:467
#: src/msgmerge.c:662 src/msgunfmt.c:525 src/msguniq.c:415
#: src/recode-sr-latin.c:158 src/urlget.c:183 src/xgettext.c:1233
#, c-format, no-wrap
msgid "Informative output:\n"
msgstr "資訊輸出：\n"

#: src/hostname.c:258 src/hostname.c:264 src/hostname.c:271
#, c-format
msgid "could not get host name"
msgstr "無法取得主機名稱"

#: src/its.c:319
#, c-format
msgid "selector is not specified"
msgstr "未指定選擇器"

#: src/its.c:326 src/its.c:1635
#, c-format
msgid "cannot create XPath context"
msgstr "無法建立 XPath 上下文"

#: src/its.c:344
#, c-format
msgid "cannot evaluate XPath expression: %s"
msgstr "無法計算 XPath 表達式：%s"

#: src/its.c:695
#, c-format
msgid "\"%s\" node does not contain \"%s\""
msgstr "「%s」節點未包含「%s」"

#: src/its.c:1086
#, c-format
msgid "invalid attribute value \"%s\" for \"%s\""
msgstr "無效的屬性值「%s」（用於「%s」）"

#: src/its.c:1418
#, c-format
msgid "the root element is not \"rules\" under namespace %s"
msgstr "根元素不是 %s 命名空間下的「規則」（「rules」）"

#: src/its.c:1461 src/its.c:1487 src/its.c:1882 src/its.c:2003
#: src/locating-rule.c:170
#, c-format
msgid "cannot read %s: %s"
msgstr "無法讀取 %s：%s"

#: src/its.c:1658
#, c-format
msgid "cannot evaluate XPath location path: %s"
msgstr "無法計算 XPath 地址路徑：%s"

#: src/locating-rule.c:238
#, c-format
msgid "\"%s\" node does not have \"%s\""
msgstr "「%s」節點未包含「%s」"

#: src/locating-rule.c:309
#, c-format
msgid "cannot read XML file %s"
msgstr "無法讀取 XML 檔案 %s"

#: src/locating-rule.c:321
#, c-format
msgid "the root element is not \"locatingRules\""
msgstr "根元素不是「locatingRules」"

#: src/msgattrib.c:374 src/msgconv.c:263 src/msgexec.c:150 src/msgfilter.c:193
#: src/msggrep.c:434 src/msginit.c:197 src/msguniq.c:283
#, c-format
msgid "at most one input file allowed"
msgstr "最多只接受一個輸入檔"

#: src/msgattrib.c:380 src/msgcat.c:313 src/msgcomm.c:298 src/msgconv.c:269
#: src/msgen.c:267 src/msgfilter.c:307 src/msgfmt.c:501 src/msgfmt.c:509
#: src/msgfmt.c:524 src/msgfmt.c:546 src/msggrep.c:440 src/msgmerge.c:401
#: src/msgmerge.c:406 src/msgmerge.c:411 src/msgmerge.c:416 src/msgmerge.c:437
#: src/msgunfmt.c:297 src/msguniq.c:289 src/xgettext.c:702 src/xgettext.c:709
#: src/xgettext.c:712 src/xgettext.c:715 src/xgettext.c:739
#, c-format
msgid "%s and %s are mutually exclusive"
msgstr "%s 和 %s 兩者互不相容"

#: src/msgattrib.c:419 src/msgconv.c:305 src/msggrep.c:510 src/msguniq.c:324
#, c-format
msgid "Usage: %s [OPTION] [INPUTFILE]\n"
msgstr "用法：%s [選項] [輸入檔]\n"

#: src/msgattrib.c:424
#, c-format, no-wrap
msgid ""
"Filters the messages of a translation catalog according to their attributes,\n"
"and manipulates the attributes.\n"
msgstr "根據訊息的屬性過濾翻譯檔裡的條目，並處理這些屬性。\n"

#: src/msgattrib.c:428 src/msgcat.c:381 src/msgcmp.c:224 src/msgcomm.c:372
#: src/msgconv.c:313 src/msgen.c:314 src/msgexec.c:284 src/msgfilter.c:419
#: src/msggrep.c:520 src/msginit.c:419 src/msgmerge.c:555 src/msgunfmt.c:433
#: src/msguniq.c:340
#, c-format
msgid ""
"Mandatory arguments to long options are mandatory for short options too.\n"
msgstr "長選項必須用的參數也必須在短選項使用。\n"

#: src/msgattrib.c:431 src/msgcat.c:384 src/msgcmp.c:227 src/msgcomm.c:375
#: src/msgconv.c:316 src/msgen.c:317 src/msgexec.c:287 src/msgfilter.c:422
#: src/msgfmt.c:918 src/msggrep.c:523 src/msginit.c:422 src/msgmerge.c:558
#: src/msgunfmt.c:447 src/msguniq.c:343 src/xgettext.c:1065
#, c-format
msgid "Input file location:\n"
msgstr "輸入檔位置：\n"

#: src/msgattrib.c:433 src/msgconv.c:318 src/msggrep.c:525 src/msguniq.c:345
#, c-format
msgid "  INPUTFILE                   input PO file\n"
msgstr "  輸入檔                       用作輸入的 PO 檔\n"

#: src/msgattrib.c:435 src/msgcat.c:390 src/msgcmp.c:233 src/msgcomm.c:381
#: src/msgconv.c:320 src/msgen.c:321 src/msgexec.c:291 src/msgfilter.c:426
#: src/msgfmt.c:922 src/msggrep.c:527 src/msgmerge.c:564 src/msguniq.c:347
#: src/xgettext.c:1071
#, c-format
msgid ""
"  -D, --directory=DIRECTORY   add DIRECTORY to list for input files search\n"
msgstr "  -D, --directory=目錄        搜尋輸入檔時加入指定 <目錄>\n"

#: src/msgattrib.c:437 src/msgconv.c:322 src/msgexec.c:293 src/msgfilter.c:428
#: src/msggrep.c:529 src/msgunfmt.c:451 src/msguniq.c:349
#, c-format
msgid "If no input file is given or if it is -, standard input is read.\n"
msgstr "如果沒有指定輸入檔或輸入檔是「-」，則由標準輸入讀取內容。\n"

#: src/msgattrib.c:440 src/msgcat.c:395 src/msgcomm.c:386 src/msgconv.c:325
#: src/msgen.c:326 src/msgfilter.c:431 src/msgfmt.c:946 src/msggrep.c:532
#: src/msginit.c:430 src/msgmerge.c:576 src/msgunfmt.c:487 src/msguniq.c:352
#: src/xgettext.c:1076
#, c-format
msgid "Output file location:\n"
msgstr "輸出檔位置：\n"

#: src/msgattrib.c:442 src/msgcat.c:397 src/msgcomm.c:388 src/msgconv.c:327
#: src/msgen.c:328 src/msgfilter.c:433 src/msgfmt.c:948 src/msgfmt.c:997
#: src/msgfmt.c:1016 src/msggrep.c:534 src/msgmerge.c:578 src/msgunfmt.c:489
#: src/msguniq.c:354
#, c-format
msgid "  -o, --output-file=FILE      write output to specified file\n"
msgstr "  -o, --output-file=檔案      將輸出的內容寫入指定 <檔案>\n"

#: src/msgattrib.c:444 src/msgcat.c:399 src/msgcomm.c:390 src/msgconv.c:329
#: src/msgen.c:330 src/msgfilter.c:435 src/msggrep.c:536 src/msgmerge.c:580
#: src/msgunfmt.c:491 src/msguniq.c:356
#, c-format
msgid ""
"The results are written to standard output if no output file is specified\n"
"or if it is -.\n"
msgstr "如果沒有指定 <輸出檔> 或 <輸出檔> 是「-」，則會在標準輸出顯示結果。\n"

#: src/msgattrib.c:448 src/msgcat.c:403 src/msgcomm.c:394 src/msguniq.c:360
#, c-format
msgid "Message selection:\n"
msgstr "訊息選擇方式：\n"

#: src/msgattrib.c:450
#, c-format
msgid ""
"      --translated            keep translated, remove untranslated messages\n"
msgstr "      --translated            只保留已翻譯條目，刪除未翻譯條目\n"

#: src/msgattrib.c:452
#, c-format
msgid ""
"      --untranslated          keep untranslated, remove translated messages\n"
msgstr "      --untranslated          只保留未翻譯條目，刪除已翻譯條目\n"

#: src/msgattrib.c:454
#, c-format
msgid "      --no-fuzzy              remove 'fuzzy' marked messages\n"
msgstr "      --no-fuzzy              刪除加上 'fuzzy' 標記的條目\n"

#: src/msgattrib.c:456
#, c-format
msgid "      --only-fuzzy            keep 'fuzzy' marked messages\n"
msgstr "      --only-fuzzy            只保留加上 'fuzzy' 標記的條目\n"

#: src/msgattrib.c:458
#, c-format
msgid "      --no-obsolete           remove obsolete #~ messages\n"
msgstr "      --no-obsolete           刪除過時的條目 (#~)\n"

#: src/msgattrib.c:460
#, c-format
msgid "      --only-obsolete         keep obsolete #~ messages\n"
msgstr "      --only-obsolete         只保留過時的條目 (#~) \n"

#: src/msgattrib.c:463
#, c-format
msgid "Attribute manipulation:\n"
msgstr "處理屬性：\n"

#: src/msgattrib.c:465
#, c-format
msgid "      --set-fuzzy             set all messages 'fuzzy'\n"
msgstr "      --set-fuzzy             將所有條目標記為 'fuzzy'\n"

#: src/msgattrib.c:467
#, c-format
msgid "      --clear-fuzzy           set all messages non-'fuzzy'\n"
msgstr "      --clear-fuzzy           移除所有條目的 'fuzzy' 狀態\n"

#: src/msgattrib.c:469
#, c-format
msgid "      --set-obsolete          set all messages obsolete\n"
msgstr "      --set-obsolete          將所有條目標記為過時\n"

#: src/msgattrib.c:471
#, c-format
msgid "      --clear-obsolete        set all messages non-obsolete\n"
msgstr "      --clear-obsolete        清除所有條目的過時標記\n"

#: src/msgattrib.c:473
#, c-format
msgid ""
"      --previous              when setting 'fuzzy', keep previous msgids\n"
"                              of translated messages.\n"
msgstr ""
"      --previous              設定「fuzzy」標記時，\n"
"                              保留原翻譯訊息前的 msgid。\n"

#: src/msgattrib.c:476
#, c-format
msgid ""
"      --clear-previous        remove the \"previous msgid\" from all "
"messages\n"
msgstr "      --clear-previous        從所有條目中刪除「先前的 msgid」\n"

#: src/msgattrib.c:478
#, c-format
msgid ""
"      --empty                 when removing 'fuzzy', also set msgstr empty\n"
msgstr "      --empty                 刪除「fuzzy」標記時，也一併清空 msgstr\n"

#: src/msgattrib.c:480
#, c-format
msgid ""
"      --only-file=FILE.po     manipulate only entries listed in FILE.po\n"
msgstr "      --only-file=FILE.po     只處理 FILE.po 裡已經有的條目\n"

#: src/msgattrib.c:482
#, c-format
msgid ""
"      --ignore-file=FILE.po   manipulate only entries not listed in FILE.po\n"
msgstr "      --ignore-file=FILE.po   只處理 FILE.po 裡沒有的條目\n"

#: src/msgattrib.c:484
#, c-format
msgid "      --fuzzy                 synonym for --only-fuzzy --clear-fuzzy\n"
msgstr "      --fuzzy                 等於 --only-fuzzy --clear-fuzzy\n"

#: src/msgattrib.c:486
#, c-format
msgid ""
"      --obsolete              synonym for --only-obsolete --clear-obsolete\n"
msgstr "      --obsolete              等於 --only-obsolete --clear-obsolete\n"

#: src/msgattrib.c:489 src/msgcat.c:415 src/msgcmp.c:247 src/msgcomm.c:406
#: src/msgconv.c:340 src/msgen.c:334 src/msgexec.c:296 src/msgfilter.c:460
#: src/msgfmt.c:1026 src/msggrep.c:579 src/msginit.c:438 src/msgmerge.c:616
#: src/msguniq.c:367
#, c-format
msgid "Input file syntax:\n"
msgstr "輸入檔語法：\n"

#: src/msgattrib.c:491 src/msgconv.c:342 src/msgen.c:336 src/msgexec.c:298
#: src/msgfilter.c:462 src/msggrep.c:581 src/msginit.c:440 src/msguniq.c:369
#, c-format
msgid ""
"  -P, --properties-input      input file is in Java .properties syntax\n"
msgstr "  -P, --properties-input      以 Java .properties 格式處理輸入檔\n"

#: src/msgattrib.c:493 src/msgconv.c:344 src/msgen.c:338 src/msgexec.c:300
#: src/msgfilter.c:464 src/msggrep.c:583 src/msginit.c:442 src/msguniq.c:371
#, c-format
msgid ""
"      --stringtable-input     input file is in NeXTstep/GNUstep .strings "
"syntax\n"
msgstr ""
"      --stringtable-input     以 NeXTstep/GNUstep .strings 格式處理輸入檔\n"

#: src/msgattrib.c:496 src/msgcat.c:423 src/msgcomm.c:414 src/msgconv.c:347
#: src/msgen.c:341 src/msgfilter.c:467 src/msgfmt.c:1054 src/msggrep.c:586
#: src/msginit.c:445 src/msgmerge.c:624 src/msgunfmt.c:495 src/msguniq.c:374
#: src/xgettext.c:1177
#, c-format
msgid "Output details:\n"
msgstr "輸出內容細節：\n"

#: src/msgattrib.c:498 src/msgcat.c:432 src/msgcomm.c:416 src/msgconv.c:349
#: src/msgen.c:345 src/msgfilter.c:469 src/msggrep.c:588 src/msginit.c:451
#: src/msgmerge.c:628 src/msgunfmt.c:497 src/msguniq.c:381 src/xgettext.c:1179
#, c-format
msgid ""
"      --color                 use colors and other text attributes always\n"
"      --color=WHEN            use colors and other text attributes if WHEN.\n"
"                              WHEN may be 'always', 'never', 'auto', or "
"'html'.\n"
msgstr ""
"      --color                 總是使用顏色及其它文字屬性\n"
"      --color=WHEN            如果符合 WHEN，就使用顏色及其它文字屬性。\n"
"                              WHEN 可以是『always』，『never』，『auto』或"
"『html』。\n"

#: src/msgattrib.c:502 src/msgcat.c:436 src/msgcomm.c:420 src/msgconv.c:353
#: src/msgen.c:349 src/msgfilter.c:473 src/msggrep.c:592 src/msginit.c:455
#: src/msgmerge.c:632 src/msgunfmt.c:501 src/msguniq.c:385 src/xgettext.c:1183
#, c-format
msgid "      --style=STYLEFILE       specify CSS style rule file for --color\n"
msgstr "      --style=樣式檔           為 --color 參數指定 CSS 樣式檔案\n"

#: src/msgattrib.c:504 src/msgcat.c:438 src/msgcomm.c:422 src/msgconv.c:355
#: src/msgen.c:351 src/msgmerge.c:634 src/msgunfmt.c:503 src/msguniq.c:387
#: src/xgettext.c:1185
#, c-format
msgid ""
"  -e, --no-escape             do not use C escapes in output (default)\n"
msgstr ""
"  -e, --no-escape             輸出結果不使用 C 轉義控制序列\n"
"                              (escape sequence)，這是預設運作方式\n"

#: src/msgattrib.c:506 src/msgcat.c:440 src/msgcomm.c:424 src/msgconv.c:357
#: src/msgen.c:353 src/msgfilter.c:477 src/msgmerge.c:636 src/msgunfmt.c:505
#: src/msguniq.c:389 src/xgettext.c:1187
#, c-format
msgid ""
"  -E, --escape                use C escapes in output, no extended chars\n"
msgstr ""
"  -E, --escape                在輸出結果中使用 C 轉義控制序列 (escape "
"sequence)\n"
"                              ，而不使用非 ASCII 字元\n"

#: src/msgattrib.c:508 src/msgcat.c:442 src/msgcomm.c:426 src/msgconv.c:359
#: src/msgen.c:355 src/msgfilter.c:479 src/msggrep.c:598 src/msgmerge.c:638
#: src/msgunfmt.c:507 src/msguniq.c:391 src/xgettext.c:1189
#, c-format
msgid "      --force-po              write PO file even if empty\n"
msgstr "      --force-po              就算沒有內容仍產生 PO 檔\n"

#: src/msgattrib.c:510 src/msgcat.c:444 src/msgcomm.c:428 src/msguniq.c:393
#: src/xgettext.c:1191
#, c-format
msgid "  -i, --indent                write the .po file using indented style\n"
msgstr "  -i, --indent                寫入的 .po 檔內容會進行縮排\n"

#: src/msgattrib.c:512 src/msgcat.c:446 src/msgcomm.c:430 src/msguniq.c:395
#: src/xgettext.c:1193
#, c-format
msgid "      --no-location           do not write '#: filename:line' lines\n"
msgstr "      --no-location           不加入類似 '#: 檔案:行號' 的原始碼位置\n"

#: src/msgattrib.c:514 src/msgcat.c:448 src/msgcomm.c:432 src/msguniq.c:397
#: src/xgettext.c:1195
#, c-format
msgid ""
"  -n, --add-location          generate '#: filename:line' lines (default)\n"
msgstr ""
"  -n, --add-location          會加入 '#: 檔案:行號' 格式的原始碼位置 (預設)\n"

#: src/msgattrib.c:516 src/msgcat.c:450 src/msgcomm.c:434 src/msguniq.c:399
#: src/xgettext.c:1197
#, c-format
msgid ""
"      --strict                write out strict Uniforum conforming .po file\n"
msgstr ""
"      --strict                產生的 .po 檔內容跟隨嚴格的 Uniforum 格式\n"

#: src/msgattrib.c:518 src/msgcat.c:452 src/msgcomm.c:436 src/msgconv.c:369
#: src/msgen.c:365 src/msgfilter.c:491 src/msggrep.c:608 src/msginit.c:457
#: src/msgmerge.c:648 src/msgunfmt.c:513 src/msguniq.c:401
#, c-format
msgid "  -p, --properties-output     write out a Java .properties file\n"
msgstr "  -p, --properties-output     產生 Java .properties 檔案\n"

#: src/msgattrib.c:520 src/msgcat.c:454 src/msgcomm.c:438 src/msgconv.c:371
#: src/msgen.c:367 src/msgfilter.c:493 src/msggrep.c:610 src/msginit.c:459
#: src/msgmerge.c:650 src/msgunfmt.c:515 src/msguniq.c:403 src/xgettext.c:1201
#, c-format
msgid ""
"      --stringtable-output    write out a NeXTstep/GNUstep .strings file\n"
msgstr "      --stringtable-output    產生 NeXTstep/GNUstep .strings 檔案\n"

#: src/msgattrib.c:522 src/msgcat.c:456 src/msgcomm.c:440 src/msgconv.c:373
#: src/msgen.c:369 src/msgfilter.c:495 src/msggrep.c:612 src/msginit.c:461
#: src/msgmerge.c:652 src/msgunfmt.c:517 src/msguniq.c:405 src/xgettext.c:1205
#, c-format
msgid "  -w, --width=NUMBER          set output page width\n"
msgstr "  -w, --width=NUMBER          指定輸出檔每行寬度\n"

#: src/msgattrib.c:524 src/msgcat.c:458 src/msgcomm.c:442 src/msgconv.c:375
#: src/msgen.c:371 src/msgfilter.c:497 src/msggrep.c:614 src/msginit.c:463
#: src/msgmerge.c:654 src/msgunfmt.c:519 src/msguniq.c:407 src/xgettext.c:1207
#, c-format
msgid ""
"      --no-wrap               do not break long message lines, longer than\n"
"                              the output page width, into several lines\n"
msgstr ""
"      --no-wrap               即使輸出的訊息超出頁寬，也不將輸出的訊息斷行\n"

#: src/msgattrib.c:527 src/msgcat.c:461 src/msgcomm.c:445 src/msgconv.c:378
#: src/msgen.c:374 src/msgfilter.c:500 src/msgmerge.c:657 src/msgunfmt.c:522
#: src/msguniq.c:410 src/xgettext.c:1210
#, c-format
msgid "  -s, --sort-output           generate sorted output\n"
msgstr "  -s, --sort-output           排序輸出結果\n"

#: src/msgattrib.c:529 src/msgcat.c:463 src/msgcomm.c:447 src/msgconv.c:380
#: src/msgen.c:376 src/msgfilter.c:502 src/msgmerge.c:659 src/msguniq.c:412
#: src/xgettext.c:1212
#, c-format
msgid "  -F, --sort-by-file          sort output by file location\n"
msgstr "  -F, --sort-by-file          根據檔案位置排列輸出結果\n"

#: src/msgcat.c:319 src/msgcomm.c:324
#, c-format
msgid "impossible selection criteria specified (%d < n < %d)"
msgstr "不可能出現的選擇條件 (%d < n <%d)"

#: src/msgcat.c:364 src/msgcomm.c:356 src/xgettext.c:1051
#, c-format
msgid "Usage: %s [OPTION] [INPUTFILE]...\n"
msgstr "用法：%s [選項] [輸入檔]…\n"

#: src/msgcat.c:369
#, c-format, no-wrap
msgid ""
"Concatenates and merges the specified PO files.\n"
"Find messages which are common to two or more of the specified PO files.\n"
"By using the --more-than option, greater commonality may be requested\n"
"before messages are printed.  Conversely, the --less-than option may be\n"
"used to specify less commonality before messages are printed (i.e.\n"
"--less-than=2 will only print the unique messages).  Translations,\n"
"comments, extracted comments, and file positions will be cumulated, except\n"
"that if --use-first is specified, they will be taken from the first PO file\n"
"to define them.\n"
msgstr ""
"連接並合併指定的 PO 檔案。\n"
"在兩個或多個指定的 PO 檔案中找出共同的翻譯訊息。\n"
"利用 --more-than 選項，可以令訊息在不同檔案中\n"
"出現的次數較多時才顯示。\n"
"相反地，--less-than 選項則會令訊息在不同檔案中\n"
"出現的次數較少時才顯示\n"
"(例如 --less-than=2 表示顯示只出現一次的訊息)。\n"
"翻譯內容、自行加上的註解和原始碼註解，以及檔案中的位置等都會累積，\n"
"除非使用了 --use-first 選項，那樣則會由第一個包含該翻譯條目的檔案取得資料。\n"

#: src/msgcat.c:386 src/msgcomm.c:377 src/xgettext.c:1067
#, c-format
msgid "  INPUTFILE ...               input files\n"
msgstr "  輸入檔 ..   .                輸入檔\n"

#: src/msgcat.c:388 src/msgcomm.c:379 src/xgettext.c:1069
#, c-format
msgid "  -f, --files-from=FILE       get list of input files from FILE\n"
msgstr "  -f, --files-from=FILE       由 FILE 讀取所有輸入檔的位置\n"

#: src/msgcat.c:392 src/msgcomm.c:383 src/msgen.c:323 src/msgfmt.c:924
#: src/xgettext.c:1073
#, c-format
msgid "If input file is -, standard input is read.\n"
msgstr "如果輸入檔是 - 的話，會由標準輸入讀取資料。\n"

#: src/msgcat.c:405 src/msgcomm.c:396
#, c-format
msgid ""
"  -<, --less-than=NUMBER      print messages with less than this many\n"
"                              definitions, defaults to infinite if not set\n"
msgstr ""
"  -<, --less-than=NUMBER      當一項條目的不同翻譯少於多少種就會顯示，\n"
"                              預設為無限 (即顯示所有條目)\n"

#: src/msgcat.c:408
#, c-format
msgid ""
"  ->, --more-than=NUMBER      print messages with more than this many\n"
"                              definitions, defaults to 0 if not set\n"
msgstr ""
"  ->, --more-than=NUMBER      當一項條目的不同翻譯多於多少種才會顯示，\n"
"                              預設為 0 種 (即顯示所有條目)\n"

#: src/msgcat.c:411 src/msgcomm.c:402
#, c-format
msgid ""
"  -u, --unique                shorthand for --less-than=2, requests\n"
"                              that only unique messages be printed\n"
msgstr ""
"  -u, --unique                等於 --less-than=2，表示只顯示\n"
"                              只有一種翻譯的字句\n"

#: src/msgcat.c:417 src/msgcmp.c:249 src/msgcomm.c:408 src/msgfmt.c:1028
#: src/msgmerge.c:618
#, c-format
msgid ""
"  -P, --properties-input      input files are in Java .properties syntax\n"
msgstr "  -P, --properties-input      輸入檔格式為 Java .properties 格式\n"

#: src/msgcat.c:419 src/msgcmp.c:251 src/msgcomm.c:410 src/msgfmt.c:1030
#: src/msgmerge.c:620
#, c-format
msgid ""
"      --stringtable-input     input files are in NeXTstep/GNUstep .strings\n"
"                              syntax\n"
msgstr ""
"      --stringtable-input     輸入檔格式為 NeXTstep/GNUstep .strings 格式\n"

#: src/msgcat.c:425 src/msgconv.c:335 src/msguniq.c:376
#, c-format
msgid "  -t, --to-code=NAME          encoding for output\n"
msgstr "  -t, --to-code=名稱          輸出的編碼方式\n"

#: src/msgcat.c:427 src/msguniq.c:378
#, c-format
msgid ""
"      --use-first             use first available translation for each\n"
"                              message, don't merge several translations\n"
msgstr ""
"      --use-first             每句只使用第一個出現的翻譯，而不會將數個\n"
"                              翻譯合併起來\n"

#: src/msgcat.c:430 src/msgen.c:343 src/msgmerge.c:626
#, c-format
msgid ""
"      --lang=CATALOGNAME      set 'Language' field in the header entry\n"
msgstr "      --lang=CATALOGNAME      在檔案頭中設定 'Language'\n"

#. This is a proper name. See the gettext manual, section Names.
#: src/msgcmp.c:175 src/msgcomm.c:288 src/msgmerge.c:376
msgid "Peter Miller"
msgstr "Peter Miller"

#: src/msgcmp.c:186 src/msgmerge.c:387
#, c-format
msgid "no input files given"
msgstr "未指定輸入檔"

#: src/msgcmp.c:191 src/msgmerge.c:392
#, c-format
msgid "exactly 2 input files required"
msgstr "需要剛好指定兩個輸入檔"

#: src/msgcmp.c:210 src/msgmerge.c:538
#, c-format
msgid "Usage: %s [OPTION] def.po ref.pot\n"
msgstr "用法：%s [選項] def.po ref.pot\n"

#: src/msgcmp.c:215
#, c-format, no-wrap
msgid ""
"Compare two Uniforum style .po files to check that both contain the same\n"
"set of msgid strings.  The def.po file is an existing PO file with the\n"
"translations.  The ref.pot file is the last created PO file, or a PO Template\n"
"file (generally created by xgettext).  This is useful for checking that\n"
"you have translated each and every message in your program.  Where an exact\n"
"match cannot be found, fuzzy matching is used to produce better diagnostics.\n"
msgstr ""
"比較兩個 Uniforum 格式的 .po 檔案，檢查兩者是否含有相同的 msgid 欄位。\n"
"def.po 是翻譯過的舊 PO 檔，ref.pot 則是新建立的 PO 檔或是 POT 檔\n"
"(通常由 xgettext 產生)。\n"
"此程式可用來檢查程式中的所有的訊息是否都已經翻譯好了。比較時如果\n"
"有不完全配合的字串出現，程式會以模糊配對的方式得出較好的結果。\n"

#: src/msgcmp.c:229
#, c-format
msgid "  def.po                      translations\n"
msgstr "  def.po                      翻譯檔\n"

#: src/msgcmp.c:231
#, c-format
msgid "  ref.pot                     references to the sources\n"
msgstr "  ref.pot                     來源參考檔 \n"

#: src/msgcmp.c:236 src/msgmerge.c:604
#, c-format
msgid "Operation modifiers:\n"
msgstr "操作模式有關選項：\n"

#: src/msgcmp.c:238 src/msgmerge.c:606
#, c-format
msgid ""
"  -m, --multi-domain          apply ref.pot to each of the domains in def."
"po\n"
msgstr ""
"  -m, --multi-domain          將 ref.pot 套用於 def.po 中的每一個領域\n"

#: src/msgcmp.c:240 src/msgmerge.c:611
#, c-format
msgid "  -N, --no-fuzzy-matching     do not use fuzzy matching\n"
msgstr "  -N, --no-fuzzy-matching     不進行模糊字串配對\n"

#: src/msgcmp.c:242
#, c-format
msgid "      --use-fuzzy             consider fuzzy entries\n"
msgstr "      --use-fuzzy             使用標記為 fuzzy 的條目\n"

#: src/msgcmp.c:244
#, c-format
msgid "      --use-untranslated      consider untranslated entries\n"
msgstr "      --use-untranslated      使用未翻譯的條目\n"

#: src/msgcmp.c:327
#, c-format
msgid "this message is untranslated"
msgstr "此條目未翻譯"

#: src/msgcmp.c:333
#, c-format
msgid "this message needs to be reviewed by the translator"
msgstr "此條目需要由翻譯者復審"

#: src/msgcmp.c:372 src/msgmerge.c:1578
#, c-format
msgid "this message is used but not defined..."
msgstr "這個訊息有使用過但沒有定義…"

#: src/msgcmp.c:375 src/msgmerge.c:1581
#, c-format
msgid "...but this definition is similar"
msgstr "…但這個定義很相似"

#: src/msgcmp.c:380 src/msgmerge.c:1610
#, c-format
msgid "this message is used but not defined in %s"
msgstr "這個訊息有使用過但在 %s 中沒有定義"

#: src/msgcmp.c:549
#, c-format
msgid "warning: this message is not used"
msgstr "警告：沒有使用這個訊息"

#: src/msgcmp.c:556 src/msgfmt.c:773 src/msgfmt.c:1606 src/xgettext.c:1020
#, c-format
msgid "found %d fatal error"
msgid_plural "found %d fatal errors"
msgstr[0] "找到 %d 個嚴重錯誤"

#: src/msgcomm.c:313
#, c-format
msgid "at least two files must be specified"
msgstr "必須指定至少兩個檔案"

#: src/msgcomm.c:361
#, c-format, no-wrap
msgid ""
"Find messages which are common to two or more of the specified PO files.\n"
"By using the --more-than option, greater commonality may be requested\n"
"before messages are printed.  Conversely, the --less-than option may be\n"
"used to specify less commonality before messages are printed (i.e.\n"
"--less-than=2 will only print the unique messages).  Translations,\n"
"comments and extracted comments will be preserved, but only from the first\n"
"PO file to define them.  File positions from all PO files will be\n"
"cumulated.\n"
msgstr ""
"在兩個或多個指定的 PO 檔案中找出共同的翻譯訊息。\n"
"利用 --more-than 選項，可以令訊息在不同檔案出現的次數較多時才會列印。\n"
"相反地，--less-than 選項則會令訊息在不同檔案出現的次數較少時才列印\n"
"（例如 --less-than=2 表示列印只出現一次的訊息）。\n"
"翻譯內容、自行加上的註解和原始程式註解的註解都會保留，\n"
"但只會保留最先定義這些訊息的 PO 檔案中的內容。\n"
"所有 PO 檔案中的翻譯條目的檔案位置都會累積下來。\n"

#: src/msgcomm.c:399
#, c-format
msgid ""
"  ->, --more-than=NUMBER      print messages with more than this many\n"
"                              definitions, defaults to 1 if not set\n"
msgstr ""
"  ->, --more-than=NUMBER      顯示出現多於指定次數的字句，若未設定則預設為 1 "
"次\n"

#: src/msgcomm.c:449 src/xgettext.c:1214
#, c-format
msgid ""
"      --omit-header           don't write header with 'msgid \"\"' entry\n"
msgstr "      --omit-header           不寫入帶有「msgid \"\"」項目的檔案標頭\n"

#: src/msgconv.c:309
#, c-format
msgid "Converts a translation catalog to a different character encoding.\n"
msgstr "將一個翻譯檔的編碼轉換為另一種文字編碼。\n"

#: src/msgconv.c:333
#, c-format
msgid "Conversion target:\n"
msgstr "轉換目標：\n"

#: src/msgconv.c:337
#, c-format
msgid "The default encoding is the current locale's encoding.\n"
msgstr "預設的編碼為目前語言的編碼。\n"

#: src/msgconv.c:361 src/msgen.c:357 src/msgmerge.c:640
#, c-format
msgid "  -i, --indent                indented output style\n"
msgstr "  -i, --indent                將輸出結果進行縮排\n"

#: src/msgconv.c:363 src/msgen.c:359 src/msgfilter.c:485 src/msggrep.c:602
#: src/msgmerge.c:642
#, c-format
msgid "      --no-location           suppress '#: filename:line' lines\n"
msgstr "      --no-location           不輸出原始碼位置\n"

#: src/msgconv.c:365 src/msgen.c:361 src/msgfilter.c:487 src/msggrep.c:604
#: src/msgmerge.c:644
#, c-format
msgid ""
"  -n, --add-location          preserve '#: filename:line' lines (default)\n"
msgstr "  -n, --add-location          保留「#: 檔名:行號」行 (預設值)\n"

#: src/msgconv.c:367 src/msgen.c:363 src/msgfilter.c:489 src/msggrep.c:606
#: src/msgmerge.c:646
#, c-format
msgid "      --strict                strict Uniforum output style\n"
msgstr "      --strict                嚴格遵從 Uniforum 格式\n"

#: src/msgen.c:256 src/msgfmt.c:461 src/xgettext.c:732
#, c-format
msgid "no input file given"
msgstr "未指定輸入檔"

#: src/msgen.c:261
#, c-format
msgid "exactly one input file required"
msgstr "需要剛好指定一個輸入檔"

#: src/msgen.c:302
#, c-format
msgid "Usage: %s [OPTION] INPUTFILE\n"
msgstr "用法：%s [選項] 輸入檔\n"

#: src/msgen.c:307
#, c-format, no-wrap
msgid ""
"Creates an English translation catalog.  The input file is the last\n"
"created English PO file, or a PO Template file (generally created by\n"
"xgettext).  Untranslated entries are assigned a translation that is\n"
"identical to the msgid.\n"
msgstr ""
"產生英文翻譯檔。輸入檔可以是 PO 檔或 POT 檔 (通常由 xgettext 產生)。\n"
"未翻譯的條目會填上和 msgid 一樣的字串。\n"

#: src/msgen.c:319
#, c-format
msgid "  INPUTFILE                   input PO or POT file\n"
msgstr "  輸入檔                      作為輸入的 PO 或 POT 檔\n"

#: src/msgexec.c:199
#, c-format
msgid "missing command name"
msgstr "缺少指令名稱"

#: src/msgexec.c:260
#, c-format
msgid "Usage: %s [OPTION] COMMAND [COMMAND-OPTION]\n"
msgstr "用法：%s [選項] 指令 [指令選項]\n"

#: src/msgexec.c:265
#, c-format, no-wrap
msgid ""
"Applies a command to all translations of a translation catalog.\n"
"The COMMAND can be any program that reads a translation from standard\n"
"input.  It is invoked once for each translation.  Its output becomes\n"
"msgexec's output.  msgexec's return code is the maximum return code\n"
"across all invocations.\n"
msgstr ""
"以翻譯檔的所有翻譯條目內容作為某指令的輸入資料。\n"
"<指令> 可以是任何由標準輸入讀入翻譯條目的程式。\n"
"對於每個翻譯條目指令都會執行一次。它的輸出結果\n"
"即是 msgexec 的輸出結果。msgexec 的回傳值是所有\n"
"指令執行的回傳值的最大值。\n"

#: src/msgexec.c:274
#, c-format, no-wrap
msgid ""
"A special builtin command called '0' outputs the translation, followed by a\n"
"null byte.  The output of \"msgexec 0\" is suitable as input for \"xargs -0\".\n"
msgstr ""
"有一個稱為 '0' 的特殊內建指令，它會輸出所有翻譯條目，並隨後加上 null 位元。\n"
"「msgexec 0」的輸出適用於作為「xargs -0」的輸入。\n"

#: src/msgexec.c:279
#, c-format
msgid "Command input:\n"
msgstr "指令輸入：\n"

#: src/msgexec.c:281
#, c-format
msgid "  --newline                   add newline at the end of input\n"
msgstr "  --newline                   在輸入末尾新增換行字元\n"

#: src/msgexec.c:289 src/msgfilter.c:424
#, c-format
msgid "  -i, --input=INPUTFILE       input PO file\n"
msgstr "  -i, --input=INPUTFILE       作為輸入的 PO 檔\n"

#: src/msgexec.c:358
#, c-format
msgid "write to stdout failed"
msgstr "寫入至標準輸出時發生錯誤"

#: src/msgfilter.c:302
#, c-format
msgid "missing filter name"
msgstr "未指定過濾器名稱"

#: src/msgfilter.c:322
#, c-format
msgid "at least one sed script must be specified"
msgstr "必須指定至少一個 sed 指令碼"

#: src/msgfilter.c:411
#, c-format
msgid "Usage: %s [OPTION] FILTER [FILTER-OPTION]\n"
msgstr "用法：%s [選項] 過濾器 [過濾器選項]\n"

#: src/msgfilter.c:415
#, c-format
msgid "Applies a filter to all translations of a translation catalog.\n"
msgstr "對於翻譯檔中的所有翻譯條目進行過濾。\n"

#: src/msgfilter.c:439
#, c-format
msgid ""
"The FILTER can be any program that reads a translation from standard input\n"
"and writes a modified translation to standard output.\n"
msgstr ""
"<過濾器> 可以是任何由標準輸入讀入譯文條目\n"
"並將修改後的翻譯寫進標準輸出的程式。\n"

#: src/msgfilter.c:444
#, c-format
msgid "Filter input and output:\n"
msgstr "過濾器輸入與輸出：\n"

#: src/msgfilter.c:446
#, c-format
msgid ""
"  --newline                   add a newline at the end of input and\n"
"                                remove a newline from the end of output"
msgstr ""
"  --newline                   在輸入結尾新增一個換行字元\n"
"                                並移除輸出結尾的換行字元"

#: src/msgfilter.c:450
#, c-format
msgid "Useful FILTER-OPTIONs when the FILTER is 'sed':\n"
msgstr "當 <過濾器> 是「sed」時比較有用的選項：\n"

#: src/msgfilter.c:452
#, c-format
msgid ""
"  -e, --expression=SCRIPT     add SCRIPT to the commands to be executed\n"
msgstr "  -e, --expression=指令       將 <指令碼> 新增到欲執行的指令中\n"

#: src/msgfilter.c:454
#, c-format
msgid ""
"  -f, --file=SCRIPTFILE       add the contents of SCRIPTFILE to the "
"commands\n"
"                                to be executed\n"
msgstr ""
"  -f, --file=指令碼檔案         將 <指令碼檔案> 的內容新增到欲執行的指令中\n"

#: src/msgfilter.c:457
#, c-format
msgid ""
"  -n, --quiet, --silent       suppress automatic printing of pattern space\n"
msgstr "  -n, --quiet, --silent       不會自動顯示過濾後的結果\n"

#: src/msgfilter.c:475 src/msggrep.c:594
#, c-format
msgid ""
"      --no-escape             do not use C escapes in output (default)\n"
msgstr ""
"      --no-escape             輸出結果不使用 C 轉義控制序列\n"
"                              (escape sequence)，這是預設運作方式\n"

#: src/msgfilter.c:481 src/msggrep.c:600
#, c-format
msgid "      --indent                indented output style\n"
msgstr "      --indent                將輸出結果進行縮排\n"

#: src/msgfilter.c:483
#, c-format
msgid ""
"      --keep-header           keep header entry unmodified, don't filter it\n"
msgstr "      --keep-header           保護標頭內容，過濾內容時不會被更改\n"

#: src/msgfilter.c:667
#, c-format
msgid "filter output is not terminated with a newline"
msgstr "filter 輸出未以換行字元終止"

#: src/msgfmt.c:369
#, c-format
msgid "the argument to %s should be a single punctuation character"
msgstr "%s 的參數應該是一個標點符號"

#: src/msgfmt.c:416
#, c-format
msgid "invalid endianness: %s"
msgstr "無效的 endianness：%s"

#. This is a proper name. See the gettext manual, section Names.
#: src/msgfmt.c:448 src/msgunfmt.c:266 src/xgettext.c:692
msgid "Ulrich Drepper"
msgstr "Ulrich Drepper"

#: src/msgfmt.c:469
#, c-format
msgid "no input file should be given if %s and %s are specified"
msgstr "若指定了 %s 和% s，則不需指定輸入檔案"

#: src/msgfmt.c:515 src/msgfmt.c:537 src/msgfmt.c:559 src/msgunfmt.c:328
#: src/msgunfmt.c:351
#, c-format
msgid "%s requires a \"-d directory\" specification"
msgstr "%s 需要指定「-d 目錄」規範"

#: src/msgfmt.c:530 src/msgfmt.c:552 src/msgfmt.c:587 src/msgfmt.c:615
#: src/msgunfmt.c:321 src/msgunfmt.c:344
#, c-format
msgid "%s requires a \"-l locale\" specification"
msgstr "%s 需要指定「-l locale」規範"

#: src/msgfmt.c:569 src/msgfmt.c:597
#, c-format
msgid "%s requires a \"--template template\" specification"
msgstr "%s 需要指定「--template template」規範"

#: src/msgfmt.c:576 src/msgfmt.c:604
#, c-format
msgid "%s requires a \"-o file\" specification"
msgstr "%s 需要指定「-o file」規範"

#: src/msgfmt.c:582 src/msgfmt.c:610
#, c-format
msgid "%s and %s are mutually exclusive in %s"
msgstr "在 %3$s 中 %1$s 和 %2$s 互斥"

#: src/msgfmt.c:624 src/msgunfmt.c:360 src/msgunfmt.c:366
#, c-format
msgid "%s is only valid with %s or %s"
msgstr "%s 只能配合 %s 或 %s 一起使用才有效"

#: src/msgfmt.c:630 src/msgfmt.c:636
#, c-format
msgid "%s is only valid with %s, %s or %s"
msgstr "%s 只能配合 %s、%s 或 %s 一起使用才有效"

#: src/msgfmt.c:709
#, c-format
msgid "cannot locate ITS rules for %s"
msgstr "無法定位 %s 的 ITS 規則"

#. TRANSLATORS: The prefix before a statistics message.  The argument
#. is a file name or a comma separated list of file names.
#: src/msgfmt.c:870
#, c-format
msgid "%s: "
msgstr "%s："

#: src/msgfmt.c:874
#, c-format
msgid "%d translated message"
msgid_plural "%d translated messages"
msgstr[0] "已翻譯 %d 條訊息"

#: src/msgfmt.c:879
#, c-format
msgid ", %d fuzzy translation"
msgid_plural ", %d fuzzy translations"
msgstr[0] "，有 %d 條訊息被標記為模糊翻譯"

#: src/msgfmt.c:884
#, c-format
msgid ", %d untranslated message"
msgid_plural ", %d untranslated messages"
msgstr[0] "，未翻譯 %d 條訊息"

#: src/msgfmt.c:904
#, c-format
msgid "Usage: %s [OPTION] filename.po ...\n"
msgstr "用法：%s [選項] filename.po …\n"

#: src/msgfmt.c:908
#, c-format
msgid "Generate binary message catalog from textual translation description.\n"
msgstr "從文字翻譯描述產生二進位訊息目錄。\n"

#: src/msgfmt.c:920
#, c-format
msgid "  filename.po ...             input files\n"
msgstr "  filename.po …               輸入檔\n"

#: src/msgfmt.c:927 src/msgmerge.c:570 src/msgunfmt.c:436 src/xgettext.c:1109
#, c-format
msgid "Operation mode:\n"
msgstr "操作模式：\n"

#: src/msgfmt.c:929
#, c-format
msgid ""
"  -j, --java                  Java mode: generate a Java ResourceBundle "
"class\n"
msgstr ""
"  -j, --java                  Java 模式：產生 Java ResourceBundle 類別\n"

#: src/msgfmt.c:931
#, c-format
msgid ""
"      --java2                 like --java, and assume Java2 (JDK 1.2 or "
"higher)\n"
msgstr ""
"      --java2                 類似 --java，但假設格式為 Java2 (JDK 1.2 或以"
"上)\n"

#: src/msgfmt.c:933
#, c-format
msgid "      --csharp                C# mode: generate a .NET .dll file\n"
msgstr "      --csharp                C# 模式，會產生 .NET .dll 檔\n"

#: src/msgfmt.c:935
#, c-format
msgid ""
"      --csharp-resources      C# resources mode: generate a .NET .resources "
"file\n"
msgstr ""
"      --csharp-resources      C# 資源模式，會產生 .NET .resources 檔案\n"

#: src/msgfmt.c:937
#, c-format
msgid ""
"      --tcl                   Tcl mode: generate a tcl/msgcat .msg file\n"
msgstr "      --tcl                   Tcl 模式：產生 tcl/msgcat .msg 檔\n"

#: src/msgfmt.c:939
#, c-format
msgid "      --qt                    Qt mode: generate a Qt .qm file\n"
msgstr "      --qt                    Qt 模式：產生 Qt .qm 檔\n"

#: src/msgfmt.c:941
#, c-format
msgid ""
"      --desktop               Desktop Entry mode: generate a .desktop file\n"
msgstr "      --desktop               桌面項目模式: 產生 .desktop 檔案\n"

#: src/msgfmt.c:943
#, c-format
msgid "      --xml                   XML mode: generate XML file\n"
msgstr "      --xml                   XML 模式：產生 XML 檔案\n"

#: src/msgfmt.c:950
#, c-format
msgid "      --strict                enable strict Uniforum mode\n"
msgstr "      --strict                強制使用 Uniforum 格式翻譯檔\n"

#: src/msgfmt.c:952 src/xgettext.c:1084
#, c-format
msgid "If output file is -, output is written to standard output.\n"
msgstr "如果輸出檔是 - 的話，則會在標準輸出顯示結果。\n"

#: src/msgfmt.c:955
#, c-format
msgid "Output file location in Java mode:\n"
msgstr "Java 模式的輸出檔位置：\n"

#: src/msgfmt.c:957 src/msgfmt.c:973 src/msgunfmt.c:456 src/msgunfmt.c:467
#, c-format
msgid "  -r, --resource=RESOURCE     resource name\n"
msgstr "  -r, --resource=資源          資源名稱\n"

#: src/msgfmt.c:959 src/msgfmt.c:975 src/msgfmt.c:985 src/msgfmt.c:995
#: src/msgfmt.c:1012 src/msgunfmt.c:458 src/msgunfmt.c:469 src/msgunfmt.c:479
#, c-format
msgid ""
"  -l, --locale=LOCALE         locale name, either language or "
"language_COUNTRY\n"
msgstr ""
"  -l, --locale=語言代碼        指定語言，可以用語言名稱或者 xy_XY 格式的\n"
"                              語言代號\n"

#: src/msgfmt.c:961
#, c-format
msgid ""
"      --source                produce a .java file, instead of a .class "
"file\n"
msgstr "      --source                產生 .java 檔案，而非 .class 檔案\n"

#: src/msgfmt.c:963
#, c-format
msgid ""
"  -d DIRECTORY                base directory of classes directory hierarchy\n"
msgstr "  -d 目錄                     class 目錄層的基本目錄\n"

#: src/msgfmt.c:965
#, c-format
msgid ""
"The class name is determined by appending the locale name to the resource "
"name,\n"
"separated with an underscore.  The -d option is mandatory.  The class is\n"
"written under the specified directory.\n"
msgstr ""
"類別名稱是以附加到資源名稱的語系名稱決定，而兩者之間會使用底線分隔。\n"
"-d 選項是必須的。class 檔將會存放到指定的目錄中。\n"

#: src/msgfmt.c:971
#, c-format
msgid "Output file location in C# mode:\n"
msgstr "C# 模式的輸出檔位置：\n"

#: src/msgfmt.c:977 src/msgunfmt.c:471
#, c-format
msgid ""
"  -d DIRECTORY                base directory for locale dependent .dll "
"files\n"
msgstr "  -d 目錄                      依賴語系的 .dll 檔案的的基本目錄\n"

#: src/msgfmt.c:979
#, c-format
msgid ""
"The -l and -d options are mandatory.  The .dll file is written in a\n"
"subdirectory of the specified directory whose name depends on the locale.\n"
msgstr ""
"必須指定 -l 和 -d 選項。.dll 檔案將會存放到指定目錄的子目錄，\n"
"而子目錄的名稱取決於語系。\n"

#: src/msgfmt.c:983
#, c-format
msgid "Output file location in Tcl mode:\n"
msgstr "Tcl 模式的輸出檔位置：\n"

#: src/msgfmt.c:987 src/msgunfmt.c:481
#, c-format
msgid "  -d DIRECTORY                base directory of .msg message catalogs\n"
msgstr "  -d 目錄                     .msg 訊息庫的基本目錄\n"

#: src/msgfmt.c:989
#, c-format
msgid ""
"The -l and -d options are mandatory.  The .msg file is written in the\n"
"specified directory.\n"
msgstr "必須指定 -l 和 -d 選項。所產生的 .msg 檔案將會存放在指定的目錄。\n"

#: src/msgfmt.c:993
#, c-format
msgid "Desktop Entry mode options:\n"
msgstr "桌面項目模式選項：\n"

#: src/msgfmt.c:999
#, c-format
msgid "  --template=TEMPLATE         a .desktop file used as a template\n"
msgstr "  --template=模板              用作模板的 .desktop 檔案\n"

#: src/msgfmt.c:1001 src/msgfmt.c:1020
#, c-format
msgid "  -d DIRECTORY                base directory of .po files\n"
msgstr "  -d 目錄                      .po 檔案的基礎目錄\n"

#: src/msgfmt.c:1003 src/xgettext.c:1138
#, c-format
msgid ""
"  -kWORD, --keyword=WORD      look for WORD as an additional keyword\n"
"  -k, --keyword               do not to use default keywords\n"
msgstr ""
"  -kWORD, --keyword=WORD      尋找 WORD 以作為額外的關鍵字\n"
"  -k, --keyword               不使用預設關鍵字\n"

#: src/msgfmt.c:1006 src/msgfmt.c:1022
#, c-format
msgid ""
"The -l, -o, and --template options are mandatory.  If -D is specified, "
"input\n"
"files are read from the directory instead of the command line arguments.\n"
msgstr ""
"必須指定 -l，-o 及 --template 選項。若指定了 -D 選項，\n"
"則輸入檔案將從目錄讀取，而非指令列參數。\n"

#: src/msgfmt.c:1010
#, c-format
msgid "XML mode options:\n"
msgstr "XML 模式選項：\n"

#: src/msgfmt.c:1014
#, c-format
msgid "  -L, --language=NAME         recognise the specified XML language\n"
msgstr "  -L, --language=NAME         識別指定的 XML 語言\n"

#: src/msgfmt.c:1018
#, c-format
msgid "  --template=TEMPLATE         an XML file used as a template\n"
msgstr "  --template=TEMPLATE         將指定的 XML 檔案用作模板\n"

#: src/msgfmt.c:1034 src/xgettext.c:1101
#, c-format
msgid "Input file interpretation:\n"
msgstr "輸入檔處理：\n"

#: src/msgfmt.c:1036
#, c-format
msgid ""
"  -c, --check                 perform all the checks implied by\n"
"                                --check-format, --check-header, --check-"
"domain\n"
msgstr ""
"  -c, --check                 進行所有檢查，也就等於指定以下三個選項：\n"
"                                --check-format, --check-header, --check-"
"domain\n"

#: src/msgfmt.c:1039
#, c-format
msgid "      --check-format          check language dependent format strings\n"
msgstr "      --check-format          檢查各種程式語言的格式字串\n"

#: src/msgfmt.c:1041
#, c-format
msgid ""
"      --check-header          verify presence and contents of the header "
"entry\n"
msgstr "      --check-header          確保標頭欄位存在和內容正確\n"

#: src/msgfmt.c:1043
#, c-format
msgid ""
"      --check-domain          check for conflicts between domain directives\n"
"                                and the --output-file option\n"
msgstr ""
"      --check-domain          檢查 domain 關鍵字和 --output-file 選項之間\n"
"                                是否衝突\n"

#: src/msgfmt.c:1046
#, c-format
msgid ""
"  -C, --check-compatibility   check that GNU msgfmt behaves like X/Open "
"msgfmt\n"
msgstr ""
"  -C, --check-compatibility   確保 GNU msgfmt 運作的方式和 X/Open msgfmt 相"
"容\n"

#: src/msgfmt.c:1048
#, c-format
msgid ""
"      --check-accelerators[=CHAR]  check presence of keyboard accelerators "
"for\n"
"                                menu items\n"
msgstr "      --check-accelerators[=字元]  檢查選單項目的鍵盤快捷鍵是否存在\n"

#: src/msgfmt.c:1051
#, c-format
msgid "  -f, --use-fuzzy             use fuzzy entries in output\n"
msgstr "  -f, --use-fuzzy             在輸出結果中顯示模糊翻譯\n"

#: src/msgfmt.c:1056
#, c-format
msgid ""
"  -a, --alignment=NUMBER      align strings to NUMBER bytes (default: %d)\n"
msgstr ""
"  -a, --alignment=數字        以 <數字> 個位元組為單位對齊字串 (預設值：%d)\n"

#: src/msgfmt.c:1058
#, c-format
msgid ""
"      --endianness=BYTEORDER  write out 32-bit numbers in the given byte "
"order\n"
"                                (big or little, default depends on "
"platform)\n"
msgstr ""
"      --endianness=BYTEORDER  以指定位元組序輸出 32 位數\n"
"                                (big 還是 little 取決於系統平台)\n"

#: src/msgfmt.c:1061
#, c-format
msgid ""
"      --no-hash               binary file will not include the hash table\n"
msgstr "      --no-hash               二元碼檔將不包含雜湊表 (hash table)\n"

#: src/msgfmt.c:1070
#, c-format
msgid "      --statistics            print statistics about translations\n"
msgstr "      --statistics            顯示有關翻譯訊息的統計\n"

#: src/msgfmt.c:1072 src/msgmerge.c:668 src/msgunfmt.c:531 src/xgettext.c:1239
#, c-format
msgid "  -v, --verbose               increase verbosity level\n"
msgstr "  -v, --verbose               讓輸出的訊息更加詳細\n"

#: src/msgfmt.c:1188
#, c-format
msgid "warning: PO file header missing or invalid\n"
msgstr "警告：缺少 PO 檔標頭，或是格式無效\n"

#: src/msgfmt.c:1190
#, c-format
msgid "warning: charset conversion will not work\n"
msgstr "警告：字元集轉換功能將不會生效\n"

#: src/msgfmt.c:1214
#, c-format
msgid "domain name \"%s\" not suitable as file name"
msgstr "領域名稱「%s」不適合作為檔案名稱"

#: src/msgfmt.c:1219
#, c-format
msgid "domain name \"%s\" not suitable as file name: will use prefix"
msgstr "領域名稱「%s」不適合當作檔案名稱：將使用前置詞"

#: src/msgfmt.c:1233
#, c-format
msgid "'domain %s' directive ignored"
msgstr "已忽略「domain %s」指令"

#: src/msgfmt.c:1293
#, c-format
msgid "empty 'msgstr' entry ignored"
msgstr "已忽略空的「msgstr」項目"

#: src/msgfmt.c:1294
#, c-format
msgid "fuzzy 'msgstr' entry ignored"
msgstr "已忽略模糊的「msgstr」項目"

#: src/msgfmt.c:1342
#, c-format
msgid "%s: warning: source file contains fuzzy translation"
msgstr "%s：警告：來源檔案包含模糊翻譯條目"

#: src/msgfmt.c:1458
#, c-format
msgid "%s does not exist"
msgstr "%s 不存在"

#: src/msgfmt.c:1465
#, c-format
msgid "%s exists but cannot read"
msgstr "%s 存在但不可讀"

#: src/msggrep.c:252 src/po-lex.c:655 src/read-desktop.c:127 src/read-mo.c:88
#: src/read-properties.c:609 src/read-stringtable.c:98 src/x-awk.c:138
#: src/x-c.c:583 src/x-csharp.c:164 src/x-elisp.c:145 src/x-java.c:200
#: src/x-javascript.c:180 src/x-librep.c:147 src/x-lisp.c:212 src/x-lua.c:174
#: src/x-perl.c:256 src/x-perl.c:331 src/x-perl.c:424 src/x-php.c:162
#: src/x-python.c:177 src/x-rst.c:242 src/x-rst.c:296 src/x-scheme.c:171
#: src/x-sh.c:164 src/x-smalltalk.c:85 src/x-tcl.c:151 src/x-vala.c:177
#: src/x-ycp.c:89
#, c-format
msgid "error while reading \"%s\""
msgstr "讀取「%s」時發生錯誤"

#: src/msggrep.c:495
#, c-format
msgid ""
"option '%c' cannot be used before 'J' or 'K' or 'T' or 'C' or 'X' has been "
"specified"
msgstr "在指定「J」、「K」、「T」、「C」或「X」前皆不能使用選項「%c」"

#: src/msggrep.c:515
#, c-format, no-wrap
msgid ""
"Extracts all messages of a translation catalog that match a given pattern\n"
"or belong to some given source files.\n"
msgstr "擷取翻譯檔中的訊息，而這些訊息符合某種樣式或屬於某個指定的來源檔。\n"

#: src/msggrep.c:541
#, c-format, no-wrap
msgid ""
"Message selection:\n"
"  [-N SOURCEFILE]... [-M DOMAINNAME]...\n"
"  [-J MSGCTXT-PATTERN] [-K MSGID-PATTERN] [-T MSGSTR-PATTERN]\n"
"  [-C COMMENT-PATTERN] [-X EXTRACTED-COMMENT-PATTERN]\n"
"A message is selected if it comes from one of the specified source files,\n"
"or if it comes from one of the specified domains,\n"
"or if -J is given and its context (msgctxt) matches MSGCTXT-PATTERN,\n"
"or if -K is given and its key (msgid or msgid_plural) matches MSGID-PATTERN,\n"
"or if -T is given and its translation (msgstr) matches MSGSTR-PATTERN,\n"
"or if -C is given and the translator's comment matches COMMENT-PATTERN,\n"
"or if -X is given and the extracted comment matches EXTRACTED-COMMENT-PATTERN.\n"
"\n"
"When more than one selection criterion is specified, the set of selected\n"
"messages is the union of the selected messages of each criterion.\n"
"\n"
"MSGCTXT-PATTERN or MSGID-PATTERN or MSGSTR-PATTERN or COMMENT-PATTERN or\n"
"EXTRACTED-COMMENT-PATTERN syntax:\n"
"  [-E | -F] [-e PATTERN | -f FILE]...\n"
"PATTERNs are basic regular expressions by default, or extended regular\n"
"expressions if -E is given, or fixed strings if -F is given.\n"
"\n"
"  -N, --location=SOURCEFILE   select messages extracted from SOURCEFILE\n"
"  -M, --domain=DOMAINNAME     select messages belonging to domain DOMAINNAME\n"
"  -J, --msgctxt               start of patterns for the msgctxt\n"
"  -K, --msgid                 start of patterns for the msgid\n"
"  -T, --msgstr                start of patterns for the msgstr\n"
"  -C, --comment               start of patterns for the translator's comment\n"
"  -X, --extracted-comment     start of patterns for the extracted comment\n"
"  -E, --extended-regexp       PATTERN is an extended regular expression\n"
"  -F, --fixed-strings         PATTERN is a set of newline-separated strings\n"
"  -e, --regexp=PATTERN        use PATTERN as a regular expression\n"
"  -f, --file=FILE             obtain PATTERN from FILE\n"
"  -i, --ignore-case           ignore case distinctions\n"
"  -v, --invert-match          output only the messages that do not match any\n"
"                              selection criterion\n"
msgstr ""
"訊息選擇：\n"
"  [-N 來源檔案]… [-M 領域]…\n"
"  [-J MSGCTXT模式] [-K MSGID模式] [-T MSGSTR模式]\n"
"  [-C 註解模式] [-X 擷取註解模式]\n"
"若訊息來自指定的來源檔案之一、\n"
"或者來自指定領域之一、或者指定了 -J，且訊息的內文 (msgctxt) 符合 <MSGCTXT模式>、\n"
"或者指定了 -K，且訊息的鍵值 (msgid 或 msgid_plural) 符合 <MSGID樣式>、\n"
"或者指定了 -T，且訊息的翻譯 (msgstr) 符合 <MSGSTR樣式>、\n"
"或者指定了 -C，且訊息的翻譯者註解符合 <註解模式>、\n"
"或者指定了 -X，且訊息的擷取註解符合 <擷取註解模式>。\n"
"\n"
"如果指定了超過一種選擇標準，最後所選擇的訊息組合將是每個標準所選出\n"
"訊息的集和。\n"
"\n"
"<MSGCTXT模式>、<MSGID模式> 或 <MSGSTR模式>、<註解模式>、\n"
"<擷取註解模式> 所使用的語法：\n"
"  [-E | -F] [-e 模式 | -f 檔案]…\n"
"<模式> 預設是指基本的正規表示式，或擴展正規表示式\n"
"(如果給出 -E 的話)，或者固定的字串 (如果給出 -F 的話)。\n"
"\n"
"  -N, --location=來源檔案       選擇的訊息擷取自 <來源檔案>\n"
"  -M, --domain=領域            選擇的訊息屬於 <領域>\n"
"  -J, --msgctxt               msgctxt 的開頭\n"
"  -K, --msgid                 msgid 的開頭\n"
"  -T, --msgstr                msgstr 的開頭\n"
"  -C, --comment               翻譯者註解的開頭\n"
"  -X, --extracted-comment     擷取註解的開頭\n"
"  -E, --extended-regexp       為擴展正規表示式的 <模式>\n"
"  -F, --fixed-strings         使用換行字元分隔字串組合的 <模式>\n"
"  -e, --regexp=模式            將 <模式> 當作正規表示式使用\n"
"  -f, --file=檔案              從 <檔案> 取得 <模式>\n"
"  -i, --ignore-case           不區分大小寫\n"
"  -v, --invert-match          僅輸出不符合任何條件的訊息\n"

#: src/msggrep.c:596
#, c-format
msgid ""
"      --escape                use C escapes in output, no extended chars\n"
msgstr ""
"      --escape                在輸出結果中使用 C 轉義控制序列 (escape "
"sequence)\n"
"                              ，而不使用非 ASCII 字元\n"

#: src/msggrep.c:617
#, c-format
msgid "      --sort-output           generate sorted output\n"
msgstr "      --sort-output           排序訊息\n"

#: src/msggrep.c:619
#, c-format
msgid "      --sort-by-file          sort output by file location\n"
msgstr "      --sort-by-file          根據檔案位置排序\n"

#: src/msginit.c:300
#, c-format
msgid ""
"You are in a language indifferent environment.  Please set\n"
"your LANG environment variable, as described in\n"
"<%s>.\n"
"This is necessary so you can test your translations.\n"
msgstr ""
"系統環境沒有任何和語言有關的設定。請根據以下檔案所述\n"
"來設定 LANG 環境變數。這是測試翻譯的必要步驟：\n"
"<%s>\n"

#: src/msginit.c:326
#, c-format
msgid ""
"Output file %s already exists.\n"
"Please specify the locale through the --locale option or\n"
"the output .po file through the --output-file option.\n"
msgstr ""
"輸出檔 %s 已經存在。\n"
"請透過 --locale 選項指定語系或透過\n"
"--output-file 選項指定輸出的 .po 檔。\n"

#: src/msginit.c:394
#, c-format
msgid "Created %s.\n"
msgstr "已建立 %s。\n"

#: src/msginit.c:414
#, c-format, no-wrap
msgid ""
"Creates a new PO file, initializing the meta information with values from the\n"
"user's environment.\n"
msgstr "建立新的 PO 檔，並由使用者環境取得初始化所需的標頭資料。\n"

#: src/msginit.c:424
#, c-format
msgid "  -i, --input=INPUTFILE       input POT file\n"
msgstr "  -i, --input=輸入檔           輸入的 POT 檔\n"

#: src/msginit.c:426
#, c-format
msgid ""
"If no input file is given, the current directory is searched for the POT "
"file.\n"
"If it is -, standard input is read.\n"
msgstr ""
"如果沒有指定輸入檔，會在目前的目錄搜尋 POT 檔。\n"
"如果輸入檔是 -，則讀取標準輸入的內容。\n"

#: src/msginit.c:432
#, c-format
msgid "  -o, --output-file=FILE      write output to specified PO file\n"
msgstr "  -o, --output-file=FILE      將輸出的內容寫入指定的 PO 檔\n"

#: src/msginit.c:434
#, c-format
msgid ""
"If no output file is given, it depends on the --locale option or the user's\n"
"locale setting.  If it is -, the results are written to standard output.\n"
msgstr ""
"如果沒有指定輸出檔，檔名將會取決於 --locale 選項或使用者的語系。\n"
"如果輸出檔是 -，則會將結果寫至標準輸出。\n"

#: src/msginit.c:447
#, c-format
msgid "  -l, --locale=LL_CC[.ENCODING]  set target locale\n"
msgstr "  -l, --locale=LL_CC[.編碼方式]    指定目標檔案語系\n"

#: src/msginit.c:449
#, c-format
msgid ""
"      --no-translator         assume the PO file is automatically generated\n"
msgstr "      --no-translator         假設 PO 檔是自動產生的\n"

#: src/msginit.c:519
msgid ""
"Found more than one .pot file.\n"
"Please specify the input .pot file through the --input option.\n"
msgstr ""
"找到多於一個的 .pot 檔。\n"
"請透過 --input 選項指定要當作輸入檔的 .pot 檔。\n"

#: src/msginit.c:527 src/msginit.c:532
#, c-format
msgid "error reading current directory"
msgstr "讀取目前目錄時發生錯誤"

#: src/msginit.c:540
msgid ""
"Found no .pot file in the current directory.\n"
"Please specify the input .pot file through the --input option.\n"
msgstr ""
"在目前目錄中找不到任何 .pot 檔。\n"
"請透過 --input 選項指定要作為輸入檔的 .pot 檔。\n"

#: src/msginit.c:976 src/msginit.c:1059 src/msginit.c:1228 src/msginit.c:1330
#: src/msginit.c:1511 src/read-csharp.c:83 src/read-java.c:82
#: src/read-resources.c:84 src/read-tcl.c:128 src/write-resources.c:106
#: src/x-ruby.c:146
#, c-format
msgid "%s subprocess failed with exit code %d"
msgstr "%s 子行程失敗，錯誤碼為 %d"

#: src/msginit.c:1193
msgid ""
"The new message catalog should contain your email address, so that users "
"can\n"
"give you feedback about the translations, and so that maintainers can "
"contact\n"
"you in case of unexpected technical problems.\n"
msgstr ""
"新的翻譯檔應該含有您的電子信箱位址，這樣使用者就可以對您的翻譯提出意見，\n"
"同時軟體維護者也可以在出現技術問題時聯絡您。\n"

#. TRANSLATORS: "English" needs to be replaced by your language.
#. For example in it.po write "Traduzioni italiani ...",
#. *not* "Traduzioni inglesi ...".
#: src/msginit.c:1706
#, c-format
msgid "English translations for %s package"
msgstr "%s 套件的正體中文翻譯"

#: src/msgl-cat.c:178 src/msgl-charset.c:86 src/msgl-iconv.c:244
#, c-format
msgid "present charset \"%s\" is not a portable encoding name"
msgstr "目前的字元集編碼「%s」不是通用的編碼名稱"

#: src/msgl-cat.c:188 src/msgl-iconv.c:255
#, c-format
msgid "two different charsets \"%s\" and \"%s\" in input file"
msgstr "輸入檔有兩種不同的字元集編碼「%s」和「%s」"

#: src/msgl-cat.c:203
#, c-format
msgid ""
"input file '%s' doesn't contain a header entry with a charset specification"
msgstr "輸入檔案「%s」不包含指定字元集的檔案標頭"

#: src/msgl-cat.c:207
#, c-format
msgid ""
"domain \"%s\" in input file '%s' doesn't contain a header entry with a "
"charset specification"
msgstr "輸入檔案「%2$s」的領域「%1$s」不包含指定字元集的檔案標頭"

#: src/msgl-cat.c:305 src/xg-message.c:337
#, c-format
msgid "msgid '%s' is used without plural and with plural."
msgstr ""

#: src/msgl-cat.c:403 src/msgl-iconv.c:363
#, c-format
msgid "target charset \"%s\" is not a portable encoding name."
msgstr "目標的字元集編碼「%s」不是通用的編碼名稱。"

#: src/msgl-cat.c:454 src/msgl-cat.c:460 src/msgl-charset.c:91
#: src/msgl-charset.c:126 src/po-xerror.c:127 src/po-xerror.c:152
#: src/xgettext.c:584 src/xgettext.c:1988 src/xg-message.c:335
#, c-format
msgid "warning: "
msgstr "警告："

#: src/msgl-cat.c:455
#, c-format
msgid ""
"Input files contain messages in different encodings, UTF-8 among others.\n"
"Converting the output to UTF-8.\n"
msgstr ""
"輸入檔含有不同編碼的訊息，其中一種是 UTF-8。將會把輸出的編碼轉換為 UTF-8。\n"

#: src/msgl-cat.c:461
#, c-format
msgid ""
"Input files contain messages in different encodings, %s and %s among "
"others.\n"
"Converting the output to UTF-8.\n"
"To select a different output encoding, use the --to-code option.\n"
msgstr ""
"輸入檔含有不同編碼的訊息，其中包括 %s 和 %s。將會把輸出的編碼轉換為 UTF-8。\n"
"若要選擇另一種輸出編碼，請使用 --to-code 選項。\n"

#: src/msgl-cat.c:500
#, c-format
msgid ""
"Conversion of file %s from %s encoding to %s encoding\n"
"changes some msgids or msgctxts.\n"
"Either change all msgids and msgctxts to be pure ASCII, or ensure they are\n"
"UTF-8 encoded from the beginning, i.e. already in your source code files.\n"
msgstr ""
"將檔案 %s 由 %s 編碼轉換為 %s 編碼將變更部份 msgid 或 msgctxt。\n"
"請將全部的 msgid 和 msgctxt 都轉換為純 ASCII 字元，\n"
"或者確保來源（換句話說就是原始碼檔）是使用 UTF-8 編碼的。\n"

#: src/msgl-charset.c:92
#, c-format
msgid ""
"Locale charset \"%s\" is different from\n"
"input file charset \"%s\".\n"
"Output of '%s' might be incorrect.\n"
"Possible workarounds are:\n"
msgstr ""
"目前語系的字元集「%s」和輸入檔的字元集「%s」不同。\n"
"「%s」的輸出可能有誤。\n"
"可行的解決方法包括：\n"

#: src/msgl-charset.c:99
#, c-format
msgid "- Set LC_ALL to a locale with encoding %s.\n"
msgstr "- 設定 LC_ALL 環境變數至使用編碼 %s 的語系。\n"

#: src/msgl-charset.c:104
#, c-format
msgid ""
"- Convert the translation catalog to %s using 'msgconv',\n"
"  then apply '%s',\n"
"  then convert back to %s using 'msgconv'.\n"
msgstr ""
"- 用「msgconv」將翻譯檔的字元集轉換為 %s，\n"
"  然後套用「%s」指令過濾內容，\n"
"  最後再用「msgconv」將翻譯檔的字元集還原為 %s。\n"

#: src/msgl-charset.c:113
#, c-format
msgid ""
"- Set LC_ALL to a locale with encoding %s,\n"
"  convert the translation catalog to %s using 'msgconv',\n"
"  then apply '%s',\n"
"  then convert back to %s using 'msgconv'.\n"
msgstr ""
"- 設定 LC_ALL 環境變數為使用編碼 %s 的語系，\n"
"  用「msgconv」將翻譯檔的字元集轉換為 %s，\n"
"  然後套用「%s」指令過濾內容，\n"
"  最後再用「msgconv」將翻譯檔的字元集還原為 %s。\n"

#: src/msgl-charset.c:127
#, c-format
msgid ""
"Locale charset \"%s\" is not a portable encoding name.\n"
"Output of '%s' might be incorrect.\n"
"A possible workaround is to set LC_ALL=C.\n"
msgstr ""
"語言的字元集編碼 %s 不是通用的編碼名稱。\n"
"「%s」的輸出可能有誤。\n"
"設定 LC_ALL=C 是一個可行的解決方法。\n"

#: src/msgl-check.c:134
msgid "plural expression can produce negative values"
msgstr "複數表示式可能產生負數值"

#: src/msgl-check.c:145
#, c-format
msgid "nplurals = %lu but plural expression can produce values as large as %lu"
msgstr "nplurals = %lu，但複數表示式可能產生最大為 %lu 的值"

#: src/msgl-check.c:191
msgid "plural expression can produce division by zero"
msgstr "複數表示式會導致被 0 整除的錯誤"

#: src/msgl-check.c:196
msgid "plural expression can produce integer overflow"
msgstr "複數表示式會導致整數溢位的錯誤"

#: src/msgl-check.c:201
msgid ""
"plural expression can produce arithmetic exceptions, possibly division by "
"zero"
msgstr "複數表示式會導致運算錯誤，可能被 0 整除"

#: src/msgl-check.c:270
#, c-format
msgid "Try using the following, valid for %s:"
msgstr "請嘗試使用下面的方法，對 %s 有效："

#: src/msgl-check.c:362 src/msgl-check.c:386
msgid "message catalog has plural form translations"
msgstr "訊息庫有複數形式的翻譯"

#: src/msgl-check.c:364
msgid "but header entry lacks a \"plural=EXPRESSION\" attribute"
msgstr "但是檔案標頭中缺少「plural=表達式」屬性"

#: src/msgl-check.c:388
msgid "but header entry lacks a \"nplurals=INTEGER\" attribute"
msgstr "但是檔案標頭中缺少「nplurals=整數」屬性"

#: src/msgl-check.c:424
msgid "invalid nplurals value"
msgstr "nplurals 值無效"

#: src/msgl-check.c:446
msgid "invalid plural expression"
msgstr "無效的複數表示式"

#: src/msgl-check.c:476 src/msgl-check.c:492
#, c-format
msgid "nplurals = %lu"
msgstr "nplurals = %lu"

#: src/msgl-check.c:478
#, c-format
msgid "but some messages have only one plural form"
msgid_plural "but some messages have only %lu plural forms"
msgstr[0] "但是某些訊息只有 %lu 種複數形式"

#: src/msgl-check.c:494
#, c-format
msgid "but some messages have one plural form"
msgid_plural "but some messages have %lu plural forms"
msgstr[0] "但是某些訊息有 %lu 種複數形式"

#: src/msgl-check.c:518
msgid ""
"message catalog has plural form translations, but lacks a header entry with "
"\"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\""
msgstr ""
"翻譯檔含有複數型態的翻譯，但缺少了以下的標頭欄位：\n"
"「Plural-Forms: nplurals=整數; plural=表示式;」"

#: src/msgl-check.c:616
msgid "'msgid' and 'msgid_plural' entries do not both begin with '\\n'"
msgstr "「msgid」和「msgid_plural」項並非都以「\\n」開始"

#: src/msgl-check.c:623
#, c-format
msgid "'msgid' and 'msgstr[%u]' entries do not both begin with '\\n'"
msgstr "「msgid」和「msgstr[%u]」項並非都以「\\n」開始"

#: src/msgl-check.c:639
msgid "'msgid' and 'msgstr' entries do not both begin with '\\n'"
msgstr "「msgid」和「msgstr」項並非都以「\\n」開始"

#: src/msgl-check.c:657
msgid "'msgid' and 'msgid_plural' entries do not both end with '\\n'"
msgstr "「msgid」和「msgid_plural」項並非都以「\\n」結束"

#: src/msgl-check.c:664
#, c-format
msgid "'msgid' and 'msgstr[%u]' entries do not both end with '\\n'"
msgstr "「msgid」和「msgstr[%u]」項並非都以「\\n」結束"

#: src/msgl-check.c:680
msgid "'msgid' and 'msgstr' entries do not both end with '\\n'"
msgstr "「msgid」和「msgstr」項並非都以「\\n」結束"

#: src/msgl-check.c:692
msgid "plural handling is a GNU gettext extension"
msgstr "複數處理是 GNU gettext 的擴充功能"

#: src/msgl-check.c:733
#, c-format
msgid "msgstr lacks the keyboard accelerator mark '%c'"
msgstr "msgstr 缺少快捷鍵標記「%c」"

#: src/msgl-check.c:744
#, c-format
msgid "msgstr has too many keyboard accelerator marks '%c'"
msgstr "msgstr 含有過多的快捷鍵標記「%c」"

#: src/msgl-check.c:818
#, c-format
msgid "header field '%s' still has the initial default value\n"
msgstr "標頭「%s」仍然是初始預設值\n"

#: src/msgl-check.c:835
#, c-format
msgid "header field '%s' missing in header\n"
msgstr "標頭缺少標頭欄位「%s」\n"

#: src/msgl-check.c:940
msgid "ASCII ellipsis ('...') instead of Unicode"
msgstr "ASCII 省略號（'...'）而非其 Unicode 版本"

#: src/msgl-check.c:1013
msgid "space before ellipsis found in user visible strings"
msgstr "在使用者可視字串中的省略號前發現空格"

#: src/msgl-check.c:1041
msgid "ASCII double quote used instead of Unicode"
msgstr "ASCII 雙引號代替了 Unicode 雙引號"

#: src/msgl-check.c:1047
msgid "ASCII single quote used instead of Unicode"
msgstr "ASCII 單引號代替了 Unicode 單引號"

#: src/msgl-check.c:1162
#, c-format
msgid "ASCII bullet ('%c') instead of Unicode"
msgstr "ASCII 圓點（'%c'）而非其 Unicode 版本"

#: src/msgl-iconv.c:62
#, c-format
msgid "%s: input is not valid in \"%s\" encoding"
msgstr "%s：對「%s」編碼而言，輸入的內容無效"

# lib/copy-file.c:61 src/file-list.c:57 src/po-lex.c:726 src/read-mo.c:171 src/urlget.c:204 src/xgettext.c:823 src/xgettext.c:836 src/xgettext.c:846 #, fuzzy, c-format
#: src/msgl-iconv.c:66
#, c-format
msgid "%s: error while converting from \"%s\" encoding to \"%s\" encoding"
msgstr "%s：當要從「%s」編碼方式轉換到「%s」編碼方式時發生錯誤"

#: src/msgl-iconv.c:285
msgid "input file doesn't contain a header entry with a charset specification"
msgstr "輸入檔沒有指定字元集的標頭欄位"

#: src/msgl-iconv.c:299 src/recode-sr-latin.c:291 src/recode-sr-latin.c:295
#: src/xgettext.c:807 src/x-python.c:624
#, c-format
msgid ""
"Cannot convert from \"%s\" to \"%s\". %s relies on iconv(), and iconv() does "
"not support this conversion."
msgstr ""
"不支援將字元集由 %s 轉換至「%s」。%s 需要 iconv()，但 iconv() 不支援此種轉換"
"方式。"

#: src/msgl-iconv.c:327
#, c-format
msgid ""
"Conversion from \"%s\" to \"%s\" introduces duplicates: some different "
"msgids become equal."
msgstr ""
"由 %s 轉換至 %s 會產生重複訊息：有些原本不同的 msgid 轉換後會將會變成相同 "
"msgid。"

#: src/msgl-iconv.c:331 src/recode-sr-latin.c:303 src/xgettext.c:813
#: src/x-python.c:630
#, c-format
msgid ""
"Cannot convert from \"%s\" to \"%s\". %s relies on iconv(). This version was "
"built without iconv()."
msgstr ""
"不支援將字元集由 %s 轉換至「%s」。%s 需要 iconv()，但編譯此程式時並未編譯 "
"iconv() 支援。"

#: src/msgmerge.c:424 src/msgmerge.c:430
#, c-format
msgid "%s is only valid with %s"
msgstr "%s 只能和 %s 一起使用才有效"

#: src/msgmerge.c:506
msgid "backup type"
msgstr "備份類型"

#: src/msgmerge.c:543
#, c-format, no-wrap
msgid ""
"Merges two Uniforum style .po files together.  The def.po file is an\n"
"existing PO file with translations which will be taken over to the newly\n"
"created file as long as they still match; comments will be preserved,\n"
"but extracted comments and file positions will be discarded.  The ref.pot\n"
"file is the last created PO file with up-to-date source references but\n"
"old translations, or a PO Template file (generally created by xgettext);\n"
"any translations or comments in the file will be discarded, however dot\n"
"comments and file positions will be preserved.  Where an exact match\n"
"cannot be found, fuzzy matching is used to produce better results.\n"
msgstr ""
"合併兩個 Uniforum 格式的 .po 檔。def.po 是原本的 PO 檔，裡面的翻譯訊息只要\n"
"和新產生的檔案條目符合，都會被合併進去；合併時仍會保留自行加上的註解，不過\n"
"會捨棄原程式碼的註解和檔案位置。ref.pot 可以是有最新參考來源但只含有舊翻譯\n"
"的 PO 檔，或是一個 POT 檔 (通常由 xgettext 產生)；任何翻譯後的訊息或檔案裡\n"
"的註解都會被捨棄，但特殊旗標註解和檔案位置都會被保留。比較時如果有不完全\n"
"配合的字串出現，程式會以模糊比對的方式得出較好的結果。\n"

#: src/msgmerge.c:560
#, c-format
msgid "  def.po                      translations referring to old sources\n"
msgstr "  def.po                      參考舊來源訊息的翻譯檔\n"

#: src/msgmerge.c:562
#, c-format
msgid "  ref.pot                     references to new sources\n"
msgstr "  ref.pot                     參考新來源訊息的翻譯檔\n"

#: src/msgmerge.c:566
#, c-format
msgid ""
"  -C, --compendium=FILE       additional library of message translations,\n"
"                              may be specified more than once\n"
msgstr "  -C, --compendium=FILE       額外的翻譯庫，選項可以使用多次\n"

#: src/msgmerge.c:572
#, c-format
msgid ""
"  -U, --update                update def.po,\n"
"                              do nothing if def.po already up to date\n"
msgstr "  -U, --update                更新 def.po (僅當 def.po 未更新時)\n"

#: src/msgmerge.c:584
#, c-format
msgid "Output file location in update mode:\n"
msgstr "更新模式的檔案輸出位置：\n"

#: src/msgmerge.c:586
#, c-format
msgid "The result is written back to def.po.\n"
msgstr "輸出結果會寫入 def.po。\n"

#: src/msgmerge.c:588
#, c-format
msgid "      --backup=CONTROL        make a backup of def.po\n"
msgstr "      --backup=CONTROL        備份 def.po\n"

#: src/msgmerge.c:590
#, c-format
msgid "      --suffix=SUFFIX         override the usual backup suffix\n"
msgstr "      --suffix=SUFFIX         自行指定備份檔名末端的字串\n"

#: src/msgmerge.c:592
#, c-format
msgid ""
"The version control method may be selected via the --backup option or "
"through\n"
"the VERSION_CONTROL environment variable.  Here are the values:\n"
"  none, off       never make backups (even if --backup is given)\n"
"  numbered, t     make numbered backups\n"
"  existing, nil   numbered if numbered backups exist, simple otherwise\n"
"  simple, never   always make simple backups\n"
msgstr ""
"版本控制的方式可透過 --backup 選項或 VERSION_CONTROL 環境變數選擇。\n"
"以下是可用的變數值：\n"
"  none, off       即使使用了 --backup 選項仍不會備份\n"
"  numbered, t     建立有數字的備份檔名\n"
"  existing, nil   若已存在有數字的備份檔則使用數字，否則使用一般名稱\n"
"  simple, never   永遠使用簡易方式備份\n"

#: src/msgmerge.c:599
#, c-format
msgid ""
"The backup suffix is '~', unless set with --suffix or the "
"SIMPLE_BACKUP_SUFFIX\n"
"environment variable.\n"
msgstr ""
"除非設定 --suffix 或 SIMPLE_BACKUP_SUFFIX 環境變數，否則備份後置詞總為「~」\n"

#: src/msgmerge.c:608
#, c-format
msgid ""
"      --for-msgfmt            produce output for '%s', not for a translator\n"
msgstr "      --for-msgfmt            產生對「%s」而非翻譯者的輸出\n"

#: src/msgmerge.c:613
#, c-format
msgid ""
"      --previous              keep previous msgids of translated messages\n"
msgstr "      --previous              保留已翻譯條目的 msgid\n"

#: src/msgmerge.c:670 src/urlget.c:189
#, c-format
msgid "  -q, --quiet, --silent       suppress progress indicators\n"
msgstr "  -q, --quiet, --silent       隱藏進度指示器\n"

#: src/msgmerge.c:1687
#, c-format
msgid "this message should define plural forms"
msgstr "此訊息應要有複數型態"

#: src/msgmerge.c:1708
#, c-format
msgid "this message should not define plural forms"
msgstr "此訊息不應有複數型態"

#: src/msgmerge.c:2112
#, c-format
msgid ""
"%sRead %ld old + %ld reference, merged %ld, fuzzied %ld, missing %ld, "
"obsolete %ld.\n"
msgstr ""
"%s\n"
"讀入 %ld 舊翻譯 + %ld 參考條目。合併：%ld，模糊：%ld，缺少：%ld，過時："
"%ld。\n"

#: src/msgmerge.c:2120 src/urlget.c:300 src/urlget.c:348 src/urlget.c:391
#: src/urlget.c:434
#, c-format
msgid " done.\n"
msgstr " 完成。\n"

#: src/msgunfmt.c:306 src/msgunfmt.c:315 src/msgunfmt.c:338
#, c-format
msgid "%s and explicit file names are mutually exclusive"
msgstr "使用 %s 不能同時指定檔案名稱"

#: src/msgunfmt.c:425
#, c-format
msgid "Usage: %s [OPTION] [FILE]...\n"
msgstr "用法：%s [選項] [檔案]…\n"

#: src/msgunfmt.c:429
#, c-format
msgid "Convert binary message catalog to Uniforum style .po file.\n"
msgstr "將二元碼翻譯檔轉換為 Uniforum 型式的 .po 檔。\n"

#: src/msgunfmt.c:438
#, c-format
msgid ""
"  -j, --java                  Java mode: input is a Java ResourceBundle "
"class\n"
msgstr ""
"  -j, --java                  Java 模式：產生 Java ResourceBundle 類別\n"

#: src/msgunfmt.c:440
#, c-format
msgid "      --csharp                C# mode: input is a .NET .dll file\n"
msgstr "      --csharp                C# 模式：輸入檔是 .NET .dll 檔\n"

#: src/msgunfmt.c:442
#, c-format
msgid ""
"      --csharp-resources      C# resources mode: input is a .NET .resources "
"file\n"
msgstr ""
"      --csharp-resources      C# 資源檔模式：輸入內容是 .NET .resources 檔"
"案\n"

#: src/msgunfmt.c:444
#, c-format
msgid ""
"      --tcl                   Tcl mode: input is a tcl/msgcat .msg file\n"
msgstr ""
"      --tcl                   Tcl 模式：輸入資料是 tcl/msgcat .msg 檔\n"

#: src/msgunfmt.c:449
#, c-format
msgid "  FILE ...                    input .mo files\n"
msgstr "  檔案 …                      作為輸入的 .mo 檔\n"

#: src/msgunfmt.c:454
#, c-format
msgid "Input file location in Java mode:\n"
msgstr "Java 模式的輸入檔位置：\n"

#: src/msgunfmt.c:460
#, c-format
msgid ""
"The class name is determined by appending the locale name to the resource "
"name,\n"
"separated with an underscore.  The class is located using the CLASSPATH.\n"
msgstr ""
"類型名稱是由語言名稱和資源名稱合併來決定的，兩者之間會用底線分隔。\n"
"class 檔會在 CLASSPATH 變數所指定的目錄中搜尋。\n"

#: src/msgunfmt.c:465
#, c-format
msgid "Input file location in C# mode:\n"
msgstr "C# 模式的輸入檔位置：\n"

#: src/msgunfmt.c:473
#, c-format
msgid ""
"The -l and -d options are mandatory.  The .dll file is located in a\n"
"subdirectory of the specified directory whose name depends on the locale.\n"
msgstr ""
"-l 和 -d 選項是必要的。.dll 檔案位於指定目錄的子目錄，而子目錄的名稱取決於語"
"系。\n"

#: src/msgunfmt.c:477
#, c-format
msgid "Input file location in Tcl mode:\n"
msgstr "Tcl 模式的輸入檔位置：\n"

#: src/msgunfmt.c:483
#, c-format
msgid ""
"The -l and -d options are mandatory.  The .msg file is located in the\n"
"specified directory.\n"
msgstr "-l 和 -d 選項是必要的。所產生的 .msg 檔案會存放在指定的目錄。\n"

#: src/msgunfmt.c:509
#, c-format
msgid "  -i, --indent                write indented output style\n"
msgstr "  -i, --indent                縮排輸出結果\n"

#: src/msgunfmt.c:511
#, c-format
msgid "      --strict                write strict uniforum style\n"
msgstr "      --strict                輸出結果嚴格遵從 Uniforum 格式\n"

#: src/msguniq.c:329
#, c-format, no-wrap
msgid ""
"Unifies duplicate translations in a translation catalog.\n"
"Finds duplicate translations of the same message ID.  Such duplicates are\n"
"invalid input for other programs like msgfmt, msgmerge or msgcat.  By\n"
"default, duplicates are merged together.  When using the --repeated option,\n"
"only duplicates are output, and all other messages are discarded.  Comments\n"
"and extracted comments will be cumulated, except that if --use-first is\n"
"specified, they will be taken from the first translation.  File positions\n"
"will be cumulated.  When using the --unique option, duplicates are discarded.\n"
msgstr ""
"統一翻譯檔裡重複出現的條目。\n"
"它會搜尋有著相同條目 ID 的翻譯，這些條目會令 msgfmt、msgmerge 或 msgcat 等的程式無法\n"
"正常處理翻譯條目。在預設模式中，重複的條目會合併在一起。若使用 --repeated\n"
"選項，則只輸出重複的條目而捨棄其它條目。\n"
"將會累積自行加上的註解和擷取到的程式碼的註解；除非使用 --use-first 選項，那樣\n"
"則會由第一個翻譯條目中讀取這些資料。檔案位置是會累積下來的。\n"
"當使用 --unique 選項時，則會捨棄任何重複的翻譯條目。\n"

#: src/msguniq.c:362
#, c-format
msgid "  -d, --repeated              print only duplicates\n"
msgstr "  -d, --repeated              只顯示重複條目\n"

#: src/msguniq.c:364
#, c-format
msgid ""
"  -u, --unique                print only unique messages, discard "
"duplicates\n"
msgstr ""
"  -u, --unique                只顯示出現一次的條目，捨棄任何重複的條目\n"

#: src/open-catalog.c:56 libgettextpo/gettext-po.c:102
#: libgettextpo/gettext-po.c:150 libgettextpo/gettext-po.c:198
msgid "<stdin>"
msgstr "<標準輸入>"

#: src/po-charset.c:491
#, c-format
msgid ""
"Charset \"%s\" is not a portable encoding name.\n"
"Message conversion to user's charset might not work.\n"
msgstr ""
"字元集「%s」不是通用的編碼名稱。\n"
"轉換訊息至使用者字元集的功能將不會運作。\n"

#: src/po-charset.c:566
#, c-format
msgid ""
"Charset \"%s\" is not supported. %s relies on iconv(),\n"
"and iconv() does not support \"%s\".\n"
msgstr ""
"不支援字元集「%s」。%s 需要 iconv()，\n"
"但 iconv() 不支援「%s」。\n"

#: src/po-charset.c:572 src/po-charset.c:627
msgid ""
"Installing GNU libiconv and then reinstalling GNU gettext\n"
"would fix this problem.\n"
msgstr "先安裝 GNU libiconv，然後再安裝 GNU gettext，就應該能修正此問題。\n"

#: src/po-charset.c:586 src/po-charset.c:631
msgid "Continuing anyway, expect parse errors."
msgstr "仍會繼續執行，但預期會出現解析發生錯誤。"

#: src/po-charset.c:588
msgid "Continuing anyway."
msgstr "仍會繼續執行。"

#: src/po-charset.c:622
#, c-format
msgid ""
"Charset \"%s\" is not supported. %s relies on iconv().\n"
"This version was built without iconv().\n"
msgstr ""
"不支援字元集「%s」。%s 需要 iconv()，\n"
"但編譯此程式時未編譯 iconv() 支援。\n"

#: src/po-charset.c:659
msgid ""
"Charset missing in header.\n"
"Message conversion to user's charset will not work.\n"
msgstr ""
"標頭缺少了指定字元集的欄位。\n"
"轉換訊息至使用者字元集的功能將不會生效。\n"

#: src/po-gram-gen.y:47
#, c-format
msgid "inconsistent use of #~"
msgstr "#~ 使用不一致"

#: src/po-gram-gen.y:200
#, c-format
msgid "missing 'msgstr[]' section"
msgstr "缺少「msgstr[]」部份"

#: src/po-gram-gen.y:209
#, c-format
msgid "missing 'msgid_plural' section"
msgstr "缺少「msgid_plural」部份"

#: src/po-gram-gen.y:217
#, c-format
msgid "missing 'msgstr' section"
msgstr "缺少「msgstr」部份"

#: src/po-gram-gen.y:356
#, c-format
msgid "first plural form has nonzero index"
msgstr "第一個複數格式的索引數字不是 0"

#: src/po-gram-gen.y:358
#, c-format
msgid "plural form has wrong index"
msgstr "複數格式含有錯誤的索引數位"

#: src/po-lex.c:90 src/po-lex.c:109
#, c-format
msgid "too many errors, aborting"
msgstr "錯誤過多，決定中斷作業"

#: src/po-lex.c:437 src/po-lex.c:505 src/write-po.c:812 src/write-po.c:949
#, c-format
msgid "invalid multibyte sequence"
msgstr "無效的位元組序列"

#: src/po-lex.c:465
#, c-format
msgid "incomplete multibyte sequence at end of file"
msgstr "檔案尾端出現不完整的位元組序列"

#: src/po-lex.c:474
#, c-format
msgid "incomplete multibyte sequence at end of line"
msgstr "行尾出現不完整的位元組序列"

#: src/po-lex.c:485
msgid "iconv failure"
msgstr "iconv 失敗"

#: src/po-lex.c:742
#, c-format
msgid "keyword \"%s\" unknown"
msgstr "關鍵字「%s」未知"

#: src/po-lex.c:852
#, c-format
msgid "invalid control sequence"
msgstr "控制序列無效"

#: src/po-lex.c:979
#, c-format
msgid "end-of-file within string"
msgstr "檔案在字串中段突然結束"

#: src/po-lex.c:985
#, c-format
msgid "end-of-line within string"
msgstr "字串中段突然斷行"

#: src/po-lex.c:1006
#, c-format
msgid "context separator <EOT> within string"
msgstr "內文分隔符 <EOT> 出現於字串中"

#: src/read-catalog.c:325 src/xgettext.c:1262
#, c-format
msgid "this file may not contain domain directives"
msgstr "此檔案不能含有 domain 指令"

#: src/read-catalog.c:370
msgid "duplicate message definition"
msgstr "訊息被重複定義"

#: src/read-catalog.c:372
msgid "this is the location of the first definition"
msgstr "這是第一次被定義的位置"

#: src/read-desktop.c:261
msgid "unterminated group name"
msgstr "群組名稱未結束"

#: src/read-desktop.c:282
msgid "invalid non-blank character"
msgstr "無效的非空白字元"

#: src/read-desktop.c:389
#, c-format
msgid "missing '=' after \"%s\""
msgstr "「%s」後缺少「=」"

#: src/read-desktop.c:452
msgid "invalid non-blank line"
msgstr "無效的非空白行"

#: src/read-mo.c:108 src/read-mo.c:130 src/read-mo.c:168 src/read-mo.c:192
#, c-format
msgid "file \"%s\" is truncated"
msgstr "檔案 %s 被截斷了"

#: src/read-mo.c:133
#, c-format
msgid "file \"%s\" contains a not NUL terminated string"
msgstr "檔案 %s 包含不以 NUL 結尾的字串"

#: src/read-mo.c:178
#, c-format
msgid "file \"%s\" contains a not NUL terminated system dependent string"
msgstr "檔案 %s 包含不以 NUL 結尾的系統依賴字串"

#: src/read-mo.c:184 src/read-mo.c:292
#, c-format
msgid "file \"%s\" is not in GNU .mo format"
msgstr "檔案 %s 並非 GNU .mo 格式檔案"

#: src/read-mo.c:198
#, c-format
msgid "file \"%s\" contains a not NUL terminated string, at %s"
msgstr "檔案 %s 在 %s 位置包含不以 NUL 結尾的字串"

#: src/read-mo.c:331
#, fuzzy, c-format
#| msgid "file \"%s\" is not in GNU .mo format"
msgid ""
"file \"%s\" is not in GNU .mo format: The array of messages is not sorted."
msgstr "檔案 %s 並非 GNU .mo 格式檔案"

#: src/read-mo.c:346
#, fuzzy, c-format
#| msgid "file \"%s\" is not in GNU .mo format"
msgid "file \"%s\" is not in GNU .mo format: The hash table size is invalid."
msgstr "檔案 %s 並非 GNU .mo 格式檔案"

#: src/read-mo.c:362
#, fuzzy, c-format
#| msgid "file \"%s\" is not in GNU .mo format"
msgid ""
"file \"%s\" is not in GNU .mo format: The hash table contains invalid "
"entries."
msgstr "檔案 %s 並非 GNU .mo 格式檔案"

#: src/read-mo.c:369
#, c-format
msgid ""
"file \"%s\" is not in GNU .mo format: Some messages are not present in the "
"hash table."
msgstr ""

#: src/read-mo.c:390
#, c-format
msgid ""
"file \"%s\" is not in GNU .mo format: Some messages are at a wrong index in "
"the hash table."
msgstr ""

#: src/read-properties.c:357
msgid "warning: invalid \\uxxxx syntax for Unicode character"
msgstr "警告：Unicode 字元 \\uxxxx 語法無效"

#: src/read-properties.c:429
#, c-format
msgid "warning: lone surrogate U+%04X"
msgstr "警告：發現到未結束字元 (lone surrogate) U+%04X"

#: src/read-properties.c:499 src/read-properties.c:534
msgid "warning: invalid Unicode character"
msgstr "警告：無效的 Unicode 字元"

#: src/read-stringtable.c:802
msgid "warning: unterminated string"
msgstr "警告：字串未結束"

#: src/read-stringtable.c:810
msgid "warning: syntax error"
msgstr "警告：語法錯誤"

#: src/read-stringtable.c:871 src/read-stringtable.c:893
msgid "warning: unterminated key/value pair"
msgstr "警告：未結束的關鍵字/值對"

#: src/read-stringtable.c:940
msgid "warning: syntax error, expected ';' after string"
msgstr "警告：語法錯誤，預期字串後有「;」"

#: src/read-stringtable.c:948
msgid "warning: syntax error, expected '=' or ';' after string"
msgstr "警告：語法錯誤，預期字串後有「=」或「;」"

#: src/recode-sr-latin.c:113
#, c-format
msgid "Written by %s and %s.\n"
msgstr "由 %s 和 %s 編寫。\n"

#. TRANSLATORS: This is a proper name. The last name is
#. (with Unicode escapes) "\u0160egan" or (with HTML entities)
#. "&Scaron;egan".
#. This is a proper name. See the gettext manual, section Names.
#: src/recode-sr-latin.c:117
msgid "Danilo Segan"
msgstr "Danilo Segan"

#: src/recode-sr-latin.c:150
#, c-format, no-wrap
msgid "Recode Serbian text from Cyrillic to Latin script.\n"
msgstr "將塞爾維亞語從西里爾文轉換為拉丁文。\n"

#: src/recode-sr-latin.c:153
#, c-format, no-wrap
msgid ""
"The input text is read from standard input.  The converted text is output to\n"
"standard output.\n"
msgstr "從標準輸入讀取輸入文字。將轉換後的文字輸出到標準輸出。\n"

#: src/recode-sr-latin.c:338
#, c-format
msgid "input is not valid in \"%s\" encoding"
msgstr "輸入無法用「%s」編碼表示"

# lib/copy-file.c:61 src/file-list.c:57 src/po-lex.c:726 src/read-mo.c:171 src/urlget.c:204 src/xgettext.c:823 src/xgettext.c:836 src/xgettext.c:846 #, fuzzy, c-format
#: src/recode-sr-latin.c:366
#, c-format
msgid "error while converting from \"%s\" encoding to \"%s\" encoding"
msgstr "當要從「%s」編碼方式轉換到「%s」編碼方式時發生錯誤"

#: src/urlget.c:156
#, c-format
msgid "expected two arguments"
msgstr "需要剛好兩個參數"

#: src/urlget.c:173
#, c-format
msgid "Usage: %s [OPTION] URL FILE\n"
msgstr "用法：%s [選項] 網址 檔案\n"

#: src/urlget.c:178
#, c-format, no-wrap
msgid ""
"Fetches and outputs the contents of an URL.  If the URL cannot be accessed,\n"
"the locally accessible FILE is used instead.\n"
msgstr "擷取並輸出某網址的內容。如果無法存取該網址，則使用指定可存取的本機檔案。\n"

#: src/urlget.c:229
#, c-format
msgid "error reading \"%s\""
msgstr "讀取「%s」時發生錯誤"

#: src/urlget.c:235
#, c-format
msgid "error writing stdout"
msgstr "寫入標準輸出時發生錯誤"

#: src/urlget.c:239
#, c-format
msgid "error after reading \"%s\""
msgstr "讀取「%s」完成後發生錯誤"

#: src/urlget.c:269
#, c-format
msgid "Retrieving %s..."
msgstr "正在取回 %s…"

#: src/urlget.c:302
#, c-format
msgid " timed out.\n"
msgstr " 逾時。\n"

#: src/urlget.c:442
#, c-format
msgid " failed.\n"
msgstr " 失敗。\n"

#: src/write-catalog.c:125
msgid ""
"Cannot output multiple translation domains into a single file with the "
"specified output format. Try using PO file syntax instead."
msgstr ""
"無法使用指定輸出格式將多個翻譯檔領域輸出為單個檔案。請嘗試用 PO 檔案語法代"
"替。"

#: src/write-catalog.c:128
msgid ""
"Cannot output multiple translation domains into a single file with the "
"specified output format."
msgstr "無法使用指定輸出格式將多個翻譯檔領域輸出為單個檔案。"

#: src/write-catalog.c:161
msgid ""
"message catalog has context dependent translations, but the output format "
"does not support them."
msgstr "訊息庫有依賴內文的翻譯，但是輸出格式不支援內文。"

#: src/write-catalog.c:196
msgid ""
"message catalog has plural form translations, but the output format does not "
"support them. Try generating a Java class using \"msgfmt --java\", instead "
"of a properties file."
msgstr ""
"翻譯檔中有複數格式的翻譯字句，但輸出格式不支援複數。請嘗試使用「msgfmt --"
"java」產生 Java 類型，\n"
"而不用 properties 檔案。"

#: src/write-catalog.c:201
msgid ""
"message catalog has plural form translations, but the output format does not "
"support them."
msgstr "翻譯檔含有複數型態的翻譯，但輸出檔的格式不支援複數型態。"

#: src/write-catalog.c:231 src/write-catalog.c:276 src/write-xml.c:59
#, c-format
msgid "cannot create output file \"%s\""
msgstr "無法產生輸出檔「%s」"

#: src/write-catalog.c:239 src/write-catalog.c:284
msgid "standard output"
msgstr "標準輸出"

#: src/write-csharp.c:708
#, c-format
msgid "failed to create directory \"%s\""
msgstr "無法建立「%s」目錄"

#: src/write-csharp.c:771
#, c-format
msgid "compilation of C# class failed, please try --verbose"
msgstr "編譯 C# class 檔出現錯誤，請嘗試使用 --verbose 選項"

#: src/write-csharp.c:773
#, c-format
msgid "compilation of C# class failed"
msgstr "編譯 C# 類別失敗"

#: src/write-desktop.c:163 src/write-mo.c:815 src/write-qt.c:741
#: src/write-tcl.c:218
#, c-format
msgid "error while opening \"%s\" for writing"
msgstr "當開啟檔案「%s」來寫入內容時發生錯誤"

#: src/write-java.c:1096
#, c-format
msgid "not a valid Java class name: %s"
msgstr "並非有效的 Java 類別名稱：%s"

#: src/write-java.c:1216
#, c-format
msgid "compilation of Java class failed, please try --verbose or set $JAVAC"
msgstr ""
"編譯 Java class 檔出現錯誤，請嘗試使用 --verbose 選項或設定 $JAVAC 環境變數"

#: src/write-java.c:1219
#, c-format
msgid "compilation of Java class failed, please try to set $JAVAC"
msgstr "編譯 Java 類別失敗，請嘗試設定 $JAVAC 變數"

#: src/write-po.c:821
msgid "incomplete multibyte sequence"
msgstr "不完整的多位元組序列"

#: src/write-po.c:884
#, c-format
msgid ""
"internationalized messages should not contain the '\\%c' escape sequence"
msgstr "國際化的訊息不應包含「\\%c」跳脫序列"

#: src/write-po.c:1334 src/write-po.c:1502
#, c-format
msgid ""
"The following msgctxt contains non-ASCII characters.\n"
"This will cause problems to translators who use a character encoding\n"
"different from yours. Consider using a pure ASCII msgctxt instead.\n"
"%s\n"
msgstr ""
"下列 msgctxt 包含非 ASCII 字元。\n"
"對於與您使用不同字元編碼的翻譯者來說，這些字元可能造成障礙。請考慮使\n"
"用純 ASCII 的 msgctxt。\n"
"%s\n"

#: src/write-po.c:1346 src/write-po.c:1514
#, c-format
msgid ""
"The following msgid contains non-ASCII characters.\n"
"This will cause problems to translators who use a character encoding\n"
"different from yours. Consider using a pure ASCII msgid instead.\n"
"%s\n"
msgstr ""
"下列的 msgid 含有不屬於 ASCII 的字元。\n"
"這樣會對使用其它編碼方式（和您所使用的字元集編碼不同）的翻譯者構成問題。\n"
"請考慮使用只有 ASCII 字元的 msgid。\n"
"%s\n"

#: src/write-qt.c:668
msgid ""
"message catalog has plural form translations\n"
"but the Qt message catalog format doesn't support plural handling\n"
msgstr "翻譯檔含有複數型態的翻譯，但 Qt 的翻譯檔不能處理複數型態\n"

#: src/write-qt.c:694
msgid ""
"message catalog has msgctxt strings containing characters outside "
"ISO-8859-1\n"
"but the Qt message catalog format supports Unicode only in the translated\n"
"strings, not in the context strings\n"
msgstr ""
"訊息庫中的 msgctxt 字串包含超出 ISO-8859-1 範圍的字元，\n"
"但 Qt 訊息庫格式僅支援已翻譯字串的 Unicode 支援，而不支援內文字串\n"

#: src/write-qt.c:718
msgid ""
"message catalog has msgid strings containing characters outside ISO-8859-1\n"
"but the Qt message catalog format supports Unicode only in the translated\n"
"strings, not in the untranslated strings\n"
msgstr ""
"翻譯檔中某些 msgid 含有 ISO-8859-1 範圍以外的字元，\n"
"但 Qt 翻譯檔格式的 Unicode 支援只支援翻譯訊息，\n"
"未翻譯訊息是不支援的。\n"

#: src/write-resources.c:96
#, c-format
msgid "error while writing to %s subprocess"
msgstr "將內容寫入至 %s 子行程時發生錯誤"

#: src/write-resources.c:133
msgid ""
"message catalog has context dependent translations\n"
"but the C# .resources format doesn't support contexts\n"
msgstr ""
"訊息庫有依賴內文的翻譯\n"
"但是 C# .resources 格式不支援內文\n"

#: src/write-resources.c:152
msgid ""
"message catalog has plural form translations\n"
"but the C# .resources format doesn't support plural handling\n"
msgstr "翻譯檔含有複數型態的翻譯，但 C# 的翻譯檔不能處理複數型態\n"

#: src/write-tcl.c:159
msgid ""
"message catalog has context dependent translations\n"
"but the Tcl message catalog format doesn't support contexts\n"
msgstr ""
"訊息庫有依賴內文的翻譯\n"
"但是 Tcl 訊息庫不支援內文\n"

#: src/write-tcl.c:178
msgid ""
"message catalog has plural form translations\n"
"but the Tcl message catalog format doesn't support plural handling\n"
msgstr "翻譯檔含有複數型態的翻譯，但 Tcl 的翻譯檔不能處理複數型態\n"

#: src/x-awk.c:340 src/x-javascript.c:764 src/x-python.c:891
#, c-format
msgid "%s:%d: warning: unterminated string"
msgstr "%s:%d: 警告：字串未結束"

#: src/x-awk.c:591
#, c-format
msgid "%s:%d: warning: unterminated regular expression"
msgstr "%s:%d: 警告：正規表示式不完整"

#: src/x-c.c:1152 src/x-csharp.c:1329 src/x-python.c:1098 src/x-vala.c:566
#, c-format
msgid "%s:%d: warning: invalid Unicode character"
msgstr "%s:%d: 警告：Unicode 字元無效"

#: src/x-c.c:1344
#, c-format
msgid ""
"%s:%d: warning: a double-quote in the delimiter of a raw string literal is "
"unsupported"
msgstr "%s:%d: 警告：原始字串不支援分隔符號有雙引號"

#: src/x-c.c:1432
#, c-format
msgid "%s:%d: warning: unterminated raw string literal"
msgstr "%s:%d: 警告：原始字串未結束"

#: src/x-c.c:1442
#, c-format
msgid "%s:%d: warning: invalid raw string literal syntax"
msgstr "%s:%d: 警告：無效的原始字串語法"

#: src/x-c.c:1617 src/x-csharp.c:1448 src/x-java.c:681 src/x-vala.c:808
#, c-format
msgid "%s:%d: warning: unterminated character constant"
msgstr "%s:%d: 警告：字元常數未結束"

#: src/x-c.c:1654 src/x-vala.c:907
#, c-format
msgid "%s:%d: warning: unterminated string literal"
msgstr "%s:%d: 警告：字串未結束"

#: src/x-csharp.c:225 src/xg-encoding.c:111
msgid "Please specify the source encoding through --from-code."
msgstr "請用 --from-code 指定來源編碼方式"

#: src/x-csharp.c:269
#, c-format
msgid ""
"%s:%d: Invalid multibyte sequence.\n"
"Please specify the correct source encoding through --from-code.\n"
msgstr ""
"%s:%d: 出現無效的位元組序列。\n"
"請使用 --from-code 選項指定原始碼的正確文字編碼。\n"

#: src/x-csharp.c:285
#, c-format
msgid ""
"%s:%d: Long incomplete multibyte sequence.\n"
"Please specify the correct source encoding through --from-code.\n"
msgstr ""
"%s:%d: 出現不完整而十分長的位元組序列。\n"
"請使用 --from-code 選項指定原始碼的正確文字編碼。\n"

#: src/x-csharp.c:297
#, c-format
msgid ""
"%s:%d: Incomplete multibyte sequence at end of file.\n"
"Please specify the correct source encoding through --from-code.\n"
msgstr ""
"%s:%d: 檔案末端出現不完整的位元組序列。\n"
"請使用 --from-code 選項指定原始碼的正確文字編碼。\n"

#: src/x-csharp.c:306
#, c-format
msgid ""
"%s:%d: Incomplete multibyte sequence at end of line.\n"
"Please specify the correct source encoding through --from-code.\n"
msgstr ""
"%s:%d: 該行末端出現不完整的位元組序列。\n"
"請使用 --from-code 選項指定原始碼的正確文字編碼。\n"

#: src/x-csharp.c:315 src/x-javascript.c:329 src/x-python.c:353
#, c-format
msgid "%s:%d: iconv failure"
msgstr "%s:%d: iconv 失敗"

#: src/x-csharp.c:338
#, c-format
msgid ""
"%s:%d: Invalid multibyte sequence.\n"
"Please specify the source encoding through --from-code.\n"
msgstr ""
"%s:%d: 出現無效的位元組序列。\n"
"請使用 --from-code 選項指定原始碼的正確文字編碼。\n"

#: src/x-csharp.c:1451 src/x-java.c:684
#, c-format
msgid "%s:%d: warning: unterminated string constant"
msgstr "%s:%d: 警告：字元常數未結束"

#: src/x-csharp.c:1953 src/x-java.c:1591
#, c-format
msgid "%s:%d: warning: ')' found where '}' was expected"
msgstr "%s:%d: 應該有「}」的地方出現了「)」"

#: src/x-csharp.c:1983 src/x-java.c:1621
#, c-format
msgid "%s:%d: warning: '}' found where ')' was expected"
msgstr "%s:%d: 應該有「)」的地方出現了「}」"

#: src/xg-arglist-parser.c:388
#, c-format
msgid "ambiguous argument specification for keyword '%.*s'"
msgstr "關鍵字「%.*s」的參數規範不明確"

#: src/xg-arglist-parser.c:450
#, c-format
msgid "warning: missing context for keyword '%.*s'"
msgstr "警告：關鍵字「%.*s」缺少內文"

#: src/xg-arglist-parser.c:475
#, c-format
msgid "warning: missing context for plural argument of keyword '%.*s'"
msgstr "警告：關鍵字「%.*s」缺少複數參數內文"

#: src/xg-arglist-parser.c:496
#, c-format
msgid "context mismatch between singular and plural form"
msgstr "單數和複數的內文不符"

#: src/xg-encoding.c:76
#, c-format
msgid "Non-ASCII character at %s%s."
msgstr "%s%s 處有非 ASCII 字元。"

#: src/xg-encoding.c:80
#, c-format
msgid "Non-ASCII comment at or before %s%s."
msgstr "%s%s 處或之前位置有非 ASCII 註解。"

#: src/xg-encoding.c:85
#, c-format
msgid "Non-ASCII string at %s%s."
msgstr "%s%s 處有非 ASCII 字串。"

#: src/xgettext.c:585
#, c-format
msgid "'%s' is not a valid encoding name.  Using ASCII as fallback.\n"
msgstr "「%s」不是個有效的編碼名稱。正使用 ASCII 作為替代方式。\n"

#: src/xgettext.c:655
#, c-format
msgid "syntax check '%s' unknown"
msgstr "語法檢查方式「%s」未知"

#: src/xgettext.c:664
#, c-format
msgid "sentence end type '%s' unknown"
msgstr "句子結尾類型「%s」未知"

#: src/xgettext.c:720
#, c-format
msgid "--join-existing cannot be used when output is written to stdout"
msgstr "當結果被導向至標準輸出時，不能使用 --join-existing 選項"

#: src/xgettext.c:724
#, c-format
msgid "xgettext cannot work without keywords to look for"
msgstr "若無關鍵字，xgettext 將無法運作"

#: src/xgettext.c:859
#, c-format
msgid "warning: ITS rule file '%s' does not exist"
msgstr "警告：ITS 規則檔案「%s」不存在"

#: src/xgettext.c:937
#, c-format
msgid ""
"warning: a fallback ITS rule file '%s' is used; it may not be in sync with "
"the upstream"
msgstr ""

#: src/xgettext.c:947
#, c-format
msgid ""
"warning: ITS rule file '%s' does not exist; check your gettext installation"
msgstr "警告：ITS 規則檔案「%s」不存在；請檢查您的 gettext 安裝是否完整。"

#: src/xgettext.c:965
#, c-format
msgid "warning: file '%s' extension '%s' is unknown; will try C"
msgstr "警告：檔案「%s」的副檔名「%s」未知; 將嘗試 C"

#: src/xgettext.c:1055
#, c-format
msgid "Extract translatable strings from given input files.\n"
msgstr "由指定的輸入檔擷取可翻譯的字串。\n"

#: src/xgettext.c:1078
#, c-format
msgid ""
"  -d, --default-domain=NAME   use NAME.po for output (instead of messages."
"po)\n"
msgstr ""
"  -d, --default-domain=NAME   使用 NAME.po 作為輸出檔 (而非 messages.po)\n"

#: src/xgettext.c:1080
#, c-format
msgid "  -o, --output=FILE           write output to specified file\n"
msgstr "  -o, --output=FILE           將輸出內容寫入指定檔案\n"

#: src/xgettext.c:1082
#, c-format
msgid ""
"  -p, --output-dir=DIR        output files will be placed in directory DIR\n"
msgstr "  -p, --output-dir=DIR        輸出檔將會存於指定目錄\n"

#: src/xgettext.c:1087
#, c-format
msgid "Choice of input file language:\n"
msgstr "輸入檔的語言選擇：\n"

#: src/xgettext.c:1089
#, fuzzy, c-format
#| msgid ""
#| "  -L, --language=NAME         recognise the specified language\n"
#| "                                (C, C++, ObjectiveC, PO, Shell, Python, "
#| "Lisp,\n"
#| "                                EmacsLisp, librep, Scheme, Smalltalk, "
#| "Java,\n"
#| "                                JavaProperties, C#, awk, YCP, Tcl, Perl, "
#| "PHP,\n"
#| "                                GCC-source, NXStringTable, RST, RSJ, "
#| "Glade,\n"
#| "                                Lua, JavaScript, Vala, Desktop)\n"
msgid ""
"  -L, --language=NAME         recognise the specified language\n"
"                                (C, C++, ObjectiveC, PO, Shell, Python, "
"Lisp,\n"
"                                EmacsLisp, librep, Scheme, Smalltalk, Java,\n"
"                                JavaProperties, C#, awk, YCP, Tcl, Perl, "
"PHP,\n"
"                                Ruby, GCC-source, NXStringTable, RST, RSJ,\n"
"                                Glade, Lua, JavaScript, Vala, Desktop)\n"
msgstr ""
"  -L, --language=名稱          識別指定的語言\n"
"                                (C, C++, ObjectiveC, PO, Shell, Python, "
"Lisp,\n"
"                                EmacsLisp, librep, Scheme, Smalltalk, Java,\n"
"                                JavaProperties, C#, awk, YCP, Tcl, Perl, "
"PHP,\n"
"                                GCC-source, NXStringTable, RST, RSJ, Glade,\n"
"                                Lua, JavaScript, Vala, Desktop)\n"

#: src/xgettext.c:1096
#, c-format
msgid "  -C, --c++                   shorthand for --language=C++\n"
msgstr "  -C, --c++                   --language=C++ 的簡寫\n"

#: src/xgettext.c:1098
#, c-format
msgid ""
"By default the language is guessed depending on the input file name "
"extension.\n"
msgstr "預設的語言是由輸入檔的副檔名決定的。\n"

#: src/xgettext.c:1103
#, c-format
msgid ""
"      --from-code=NAME        encoding of input files\n"
"                                (except for Python, Tcl, Glade)\n"
msgstr ""
"      --from-code=NAME        輸入檔的編碼方式\n"
"                                (Python, Tcl, Glade 除外)\n"

#: src/xgettext.c:1106
#, c-format
msgid "By default the input files are assumed to be in ASCII.\n"
msgstr "輸入檔內容預設會當作 ASCII 看待。\n"

#: src/xgettext.c:1111
#, c-format
msgid "  -j, --join-existing         join messages with existing file\n"
msgstr "  -j, --join-existing         合併已存在的訊息檔\n"

#: src/xgettext.c:1113
#, c-format
msgid "  -x, --exclude-file=FILE.po  entries from FILE.po are not extracted\n"
msgstr "  -x, --exclude-file=FILE.po  不取出屬於 FILE.po 的訊息\n"

#: src/xgettext.c:1115
#, c-format
msgid ""
"  -cTAG, --add-comments=TAG   place comment blocks starting with TAG and\n"
"                                preceding keyword lines in output file\n"
"  -c, --add-comments          place all comment blocks preceding keyword "
"lines\n"
"                                in output file\n"
msgstr ""
"  -cTAG, --add-comments=TAG   從 TAG 開始放置註解塊\n"
"                              並在輸出檔案中以關鍵字開啟一行\n"
"  -c, --add-comments          在輸出檔案中以關鍵字開啟一行，\n"
"                              並放置所有註解塊\n"

#: src/xgettext.c:1120
#, c-format
msgid ""
"      --check=NAME            perform syntax check on messages\n"
"                                (ellipsis-unicode, space-ellipsis,\n"
"                                 quote-unicode, bullet-unicode)\n"
msgstr ""
"      --check=NAME            對訊息文字做語法檢查\n"
"                                (ellipsis-unicode (Unicode 省略號)、\n"
"                                 space-ellipsis (空格加省略號)、\n"
"                                 quote-unicode (Unicode 引號)、\n"
"                                 bullet-unicode (Unicode 項目符號))\n"

#: src/xgettext.c:1124
#, c-format
msgid ""
"      --sentence-end=TYPE     type describing the end of sentence\n"
"                                (single-space, which is the default, \n"
"                                 or double-space)\n"
msgstr ""
"      --sentence-end=TYPE     句子結尾的類型描述\n"
"                                (single-space (單空格，預設值)、\n"
"                                 double-space (雙空格))\n"

#: src/xgettext.c:1129
#, c-format
msgid "Language specific options:\n"
msgstr "個別語言特殊選項：\n"

#: src/xgettext.c:1131
#, c-format
msgid "  -a, --extract-all           extract all strings\n"
msgstr "  -a, --extract-all           擷取所有字串\n"

#: src/xgettext.c:1133
#, c-format
msgid ""
"                                (only languages C, C++, ObjectiveC, Shell,\n"
"                                Python, Lisp, EmacsLisp, librep, Scheme, "
"Java,\n"
"                                C#, awk, Tcl, Perl, PHP, GCC-source, Glade,\n"
"                                Lua, JavaScript, Vala)\n"
msgstr ""
"                                (僅支援 C, C++, ObjectiveC, Shell,\n"
"                                Python, Lisp, EmacsLisp, librep, Scheme, "
"Java,\n"
"                                C#, awk, Tcl, Perl, PHP, GCC-source, Glade,\n"
"                                Lua, JavaScript, Vala)\n"

#: src/xgettext.c:1141
#, c-format
msgid ""
"                                (only languages C, C++, ObjectiveC, Shell,\n"
"                                Python, Lisp, EmacsLisp, librep, Scheme, "
"Java,\n"
"                                C#, awk, Tcl, Perl, PHP, GCC-source, Glade,\n"
"                                Lua, JavaScript, Vala, Desktop)\n"
msgstr ""
"                                (僅支援 C, C++, ObjectiveC, Shell,\n"
"                                Python, Lisp, EmacsLisp, librep, Scheme, "
"Java,\n"
"                                C#, awk, Tcl, Perl, PHP, GCC-source, Glade,\n"
"                                Lua, JavaScript, Vala, Desktop)\n"

#: src/xgettext.c:1146
#, c-format
msgid ""
"      --flag=WORD:ARG:FLAG    additional flag for strings inside the "
"argument\n"
"                              number ARG of keyword WORD\n"
msgstr ""
"      --flag=WORD:ARG:FLAG    關鍵字 WORD 的參數編碼 ARG 中\n"
"                              字串的額外 flag\n"

#: src/xgettext.c:1149
#, c-format
msgid ""
"                                (only languages C, C++, ObjectiveC, Shell,\n"
"                                Python, Lisp, EmacsLisp, librep, Scheme, "
"Java,\n"
"                                C#, awk, YCP, Tcl, Perl, PHP, GCC-source,\n"
"                                Lua, JavaScript, Vala)\n"
msgstr ""
"                                (僅支援 C, C++, ObjectiveC, Shell,\n"
"                                Python, Lisp, EmacsLisp, librep, Scheme, "
"Java,\n"
"                                C#, awk, YCP, Tcl, Perl, PHP, GCC-source,\n"
"                                Lua, JavaScript, Vala)\n"

#: src/xgettext.c:1154
#, c-format
msgid "  -T, --trigraphs             understand ANSI C trigraphs for input\n"
msgstr "  -T, --trigraphs             支援讀取輸入內容中的 ANSI C 三併詞\n"

#: src/xgettext.c:1156
#, c-format
msgid "                                (only languages C, C++, ObjectiveC)\n"
msgstr "                                (只適用於 C, C++, ObjectiveC)\n"

#: src/xgettext.c:1158
#, c-format
msgid "      --its=FILE              apply ITS rules from FILE\n"
msgstr "      --its=檔案              讀取指定 <檔案> 並套用其中的 ITS 規則\n"

#: src/xgettext.c:1160
#, c-format
msgid "                                (only XML based languages)\n"
msgstr "                                （僅支援基於 XML 的語言）\n"

#: src/xgettext.c:1162
#, c-format
msgid "      --qt                    recognize Qt format strings\n"
msgstr "      --qt                    識別 Qt 格式的字串\n"

#: src/xgettext.c:1164 src/xgettext.c:1168 src/xgettext.c:1172
#, c-format
msgid "                                (only language C++)\n"
msgstr "                                (只適用於 C++)\n"

#: src/xgettext.c:1166
#, c-format
msgid "      --kde                   recognize KDE 4 format strings\n"
msgstr "      --kde                   識別 KDE 4 格式字串\n"

#: src/xgettext.c:1170
#, c-format
msgid "      --boost                 recognize Boost format strings\n"
msgstr "      --boost                 識別 Boost 格式字串\n"

#: src/xgettext.c:1174
#, c-format
msgid ""
"      --debug                 more detailed formatstring recognition result\n"
msgstr "      --debug                 顯示較詳細的格式字串識別結果\n"

#: src/xgettext.c:1199
#, c-format
msgid "      --properties-output     write out a Java .properties file\n"
msgstr "      --properties-output     輸出檔格式為 Java .properties 檔\n"

#: src/xgettext.c:1203
#, c-format
msgid "      --itstool               write out itstool comments\n"
msgstr "      --itstool               輸出 itstool 註解\n"

#: src/xgettext.c:1216
#, c-format
msgid "      --copyright-holder=STRING  set copyright holder in output\n"
msgstr "      --copyright-holder=STRING  設定輸出檔的版權所有者\n"

#: src/xgettext.c:1218
#, c-format
msgid ""
"      --foreign-user          omit FSF copyright in output for foreign user\n"
msgstr ""
"      --foreign-user          輸出檔不加上 FSF 的版權宣告，適用於 FSF 以外的"
"專案\n"

#: src/xgettext.c:1220
#, c-format
msgid "      --package-name=PACKAGE  set package name in output\n"
msgstr "      --package-name=PACKAGE  輸出時設定套裝軟體名字\n"

#: src/xgettext.c:1222
#, c-format
msgid "      --package-version=VERSION  set package version in output\n"
msgstr "      --package-version=VERSION  輸出時設定套裝軟體版本\n"

#: src/xgettext.c:1224
#, c-format
msgid ""
"      --msgid-bugs-address=EMAIL@ADDRESS  set report address for msgid bugs\n"
msgstr ""
"      --msgid-bugs-address=EMAIL@ADDRESS  指定匯報 msgid 問題時的所要使用的郵"
"件地址\n"

#: src/xgettext.c:1226
#, c-format
msgid ""
"  -m[STRING], --msgstr-prefix[=STRING]  use STRING or \"\" as prefix for "
"msgstr\n"
"                                values\n"
msgstr ""
"  -m[字串], --msgstr-prefix[=字串]       使用 <字串> 或 \"\" 作為\n"
"                                         msgstr 內容的前置詞\n"

#: src/xgettext.c:1229
#, c-format
msgid ""
"  -M[STRING], --msgstr-suffix[=STRING]  use STRING or \"\" as suffix for "
"msgstr\n"
"                                values\n"
msgstr ""
"  -M[字串], --msgstr-suffix[=字串]       使用 <字串> 或 \"\" 作為 msgstr 值的"
"後置詞\n"

#: src/xgettext.c:1641
#, c-format
msgid ""
"A --flag argument doesn't have the <keyword>:<argnum>:[pass-]<flag> syntax: "
"%s"
msgstr "--flag 指定的參數語法不是 <關鍵字>:<參數編號>:[遍數-]<旗標> 格式：%s"

#: src/xgettext.c:1798
msgid "standard input"
msgstr "標準輸入"

#: src/xgettext.c:1989
msgid ""
"The option --msgid-bugs-address was not specified.\n"
"If you are using a 'Makevars' file, please specify\n"
"the MSGID_BUGS_ADDRESS variable there; otherwise please\n"
"specify an --msgid-bugs-address command line option.\n"
msgstr ""
"未指定選項 --msgid-bugs-address。\n"
"如果您正在使用「Makevars」檔案，請指定\n"
"MSGID_BUGS_ADDRESS 變數；\n"
"否則，請指定 --msgid-bugs-address 指令列選項。\n"

#: src/xgettext.c:2208
#, c-format
msgid "language '%s' unknown"
msgstr "語言「%s」未知"

#: src/xg-message.c:91 src/xg-message.c:227 src/xg-message.c:296
#, c-format
msgid "%s%s: warning: "
msgstr "%s%s: 警告："

#: src/xg-message.c:94
#, c-format
msgid ""
"Although being used in a format string position, the %s is not a valid %s "
"format string. Reason: %s\n"
msgstr "儘管在格式字串的位置使用，但 %s 仍不是有效的 %s 格式字串。原因：%s\n"

#: src/xg-message.c:95
#, c-format
msgid ""
"Although declared as such, the %s is not a valid %s format string. Reason: "
"%s\n"
msgstr "縱使表面上 %s 宣告了是 %s 格式字串，但實際上不是。原因為：%s\n"

#: src/xg-message.c:229
#, c-format
msgid ""
"'%s' format string with unnamed arguments cannot be properly localized:\n"
"The translator cannot reorder the arguments.\n"
"Please consider using a format string with named arguments,\n"
"and a mapping instead of a tuple for the arguments.\n"
msgstr ""
"帶有未命名參數的「%s」格式字串無法正確本地化：\n"
"翻譯者無法重新編排參數的順序。\n"
"請考慮使用帶有命名參數和映射的格式字串，而不是使用參數元組。\n"

#: src/xg-message.c:298
msgid ""
"Empty msgid.  It is reserved by GNU gettext:\n"
"gettext(\"\") returns the header entry with\n"
"meta information, not the empty string.\n"
msgstr ""
"空白的 msgid。它是保留給 GNU gettext 使用的：\n"
"gettext(\"\") 會回傳檔案標頭的中繼資訊，\n"
"而非空白字串。\n"

#: src/xg-message.c:339
#, c-format
msgid "%s%s: Here is the occurrence without plural."
msgstr ""

#: src/xg-message.c:341
#, c-format
msgid "%s%s: Here is the occurrence with plural."
msgstr ""

#: src/xg-message.c:343
msgid ""
"Workaround: If the msgid is a sentence, change the wording of the sentence; "
"otherwise, use contexts for disambiguation."
msgstr ""

#: src/xg-mixed-string.c:496
#, fuzzy, c-format
#| msgid "warning: lone surrogate U+%04X"
msgid "%s:%d: warning: lone surrogate U+%04X"
msgstr "警告：發現到未結束字元 (lone surrogate) U+%04X"

#: src/x-java.c:1207 src/x-java.c:1251
#, fuzzy, c-format
#| msgid "%s:%d: warning: unterminated string"
msgid "%s:%d: warning: unterminated text block"
msgstr "%s:%d: 警告：字串未結束"

#: src/x-java.c:1220
#, fuzzy, c-format
#| msgid "%s:%d: warning: invalid raw string literal syntax"
msgid "%s:%d: warning: invalid syntax in text block"
msgstr "%s:%d: 警告：無效的原始字串語法"

#: src/x-javascript.c:239
msgid "Please specify the source encoding through --from-code\n"
msgstr "請用 --from-code 指定來源編碼方式\n"

#: src/x-javascript.c:283
#, c-format
msgid ""
"%s:%d: Invalid multibyte sequence.\n"
"Please specify the correct source encoding through --from-code\n"
msgstr ""
"%s:%d：出現了無效的多位元組序列。\n"
"請透過 --from-code 指定來源檔案的編碼\n"

#: src/x-javascript.c:299
#, c-format
msgid ""
"%s:%d: Long incomplete multibyte sequence.\n"
"Please specify the correct source encoding through --from-code\n"
msgstr ""
"%s:%d：十分長的不完整多位元組序列。\n"
"請透過 --from-code 指定來源檔案的編碼\n"

#: src/x-javascript.c:311
#, c-format
msgid ""
"%s:%d: Incomplete multibyte sequence at end of file.\n"
"Please specify the correct source encoding through --from-code\n"
msgstr ""
"%s:%d：檔案結尾處出現了不完整的多位元組序列。\n"
"請透過 --from-code 指定來源檔案的編碼\n"

#: src/x-javascript.c:320
#, c-format
msgid ""
"%s:%d: Incomplete multibyte sequence at end of line.\n"
"Please specify the correct source encoding through --from-code\n"
msgstr ""
"%s:%d：行結尾處出現了不完整的多位元組序列。\n"
"請透過 --from-code 指定來源檔案的編碼\n"

#: src/x-javascript.c:352
#, c-format
msgid ""
"%s:%d: Invalid multibyte sequence.\n"
"Please specify the source encoding through --from-code\n"
msgstr ""
"%s:%d：無效的多位元組序列。\n"
"請透過 --from-code 指定來源檔案的編碼\n"

#: src/x-javascript.c:979
#, c-format
msgid "%s:%d: warning: RegExp literal terminated too early"
msgstr "%s:%d：警告：正規表示式過早結束"

#: src/x-javascript.c:1102
#, c-format
msgid "%s:%d: warning: %s is not allowed"
msgstr "%s:%d：警告：不允許使用 %s"

#: src/x-javascript.c:1117
#, c-format
msgid "%s:%d: warning: unterminated XML markup"
msgstr "%s:%d：警告：未閉合的 XML 標記"

#: src/x-perl.c:338
#, c-format
msgid "%s:%d: can't find string terminator \"%s\" anywhere before EOF"
msgstr "%s:%d: EOF 之前找不到任何表示字串完結的標記「%s」"

#: src/x-perl.c:1073
#, c-format
msgid "%s:%d: missing right brace on \\x{HEXNUMBER}"
msgstr "%s:%d: \\x{HEXNUMBER} 缺少了右方大括號"

#: src/x-perl.c:1194
#, c-format
msgid "%s:%d: invalid interpolation (\"\\l\") of 8bit character \"%c\""
msgstr "%s:%d: 8 位字元「%c」的轉換 (「\\l」) 無效"

#: src/x-perl.c:1214
#, c-format
msgid "%s:%d: invalid interpolation (\"\\u\") of 8bit character \"%c\""
msgstr "%s:%d: 8 位字元「%c」的轉換 (「\\u」) 無效"

#: src/x-perl.c:1248
#, c-format
msgid "%s:%d: invalid variable interpolation at \"%c\""
msgstr "%s:%d：「%c」處有無效的變數轉義字元"

#: src/x-perl.c:1261
#, c-format
msgid "%s:%d: invalid interpolation (\"\\L\") of 8bit character \"%c\""
msgstr "%s:%d: 8 位字元「%c」的轉換 (「\\L」) 無效"

#: src/x-perl.c:1278
#, c-format
msgid "%s:%d: invalid interpolation (\"\\U\") of 8bit character \"%c\""
msgstr "%s:%d: 8 位字元「%c」的轉換 (「\\U」) 無效"

#: src/x-python.c:279
msgid ""
"Please specify the source encoding through --from-code or through a comment\n"
"as specified in https://www.python.org/peps/pep-0263.html.\n"
msgstr ""
"請透過 --from-code 或是註解指定來源檔案的編碼，\n"
"如 https://www.python.org/peps/pep-0263.html 中所規範的那樣。\n"

#: src/x-python.c:336
#, c-format
msgid ""
"%s:%d: Long incomplete multibyte sequence.\n"
"Please specify the correct source encoding through --from-code or through a\n"
"comment as specified in https://www.python.org/peps/pep-0263.html.\n"
msgstr ""
"%s:%d：十分長的不完整多位元組序列。\n"
"請透過 --from-code 指定來源檔案的正確編碼，詳見\n"
"https://www.python.org/peps/pep-0263.html。\n"

#: src/x-python.c:488
#, c-format
msgid ""
"%s:%d: Invalid multibyte sequence.\n"
"Please specify the correct source encoding through --from-code or through a\n"
"comment as specified in https://www.python.org/peps/pep-0263.html.\n"
msgstr ""
"%s:%d：出現了無效的多位元組序列。\n"
"請透過 --from-code 指定來源檔案的正確編碼，詳見\n"
"https://www.python.org/peps/pep-0263.html。\n"

#: src/x-python.c:497
#, c-format
msgid ""
"%s:%d: Incomplete multibyte sequence at end of file.\n"
"Please specify the correct source encoding through --from-code or through a\n"
"comment as specified in https://www.python.org/peps/pep-0263.html.\n"
msgstr ""
"%s:%d：檔案結尾處出現了不完整的多位元組序列。\n"
"請透過 --from-code 指定來源檔案的正確編碼，詳見\n"
"https://www.python.org/peps/pep-0263.html。\n"

#: src/x-python.c:506
#, c-format
msgid ""
"%s:%d: Incomplete multibyte sequence at end of line.\n"
"Please specify the correct source encoding through --from-code or through a\n"
"comment as specified in https://www.python.org/peps/pep-0263.html.\n"
msgstr ""
"%s:%d：檔案結尾處出現了不完整的多位元組序列。\n"
"請透過 --from-code 指定來源檔案的正確編碼，詳見\n"
"https://www.python.org/peps/pep-0263.html。\n"

#: src/x-python.c:679
#, c-format
msgid "Unknown encoding \"%s\". Proceeding with ASCII instead."
msgstr "未知編碼「%s」。先按照 ASCII 處理。"

#: src/x-rst.c:116
#, c-format
msgid "%s:%d: invalid string definition"
msgstr "%s:%d: 字串定義無效"

#: src/x-rst.c:180
#, c-format
msgid "%s:%d: missing number after #"
msgstr "%s:%d: # 後缺少了數字"

#: src/x-rst.c:215
#, c-format
msgid "%s:%d: invalid string expression"
msgstr "%s:%d: 無效的字串表示式"

#: src/x-rst.c:677
#, c-format
msgid "%s:%d: invalid JSON syntax"
msgstr "%s:%d：JSON 語法無效"

#: src/x-rst.c:684
#, c-format
msgid "%s:%d: invalid RSJ syntax"
msgstr "%s:%d：RSJ 語法無效"

#: src/x-rst.c:692
#, c-format
msgid "%s:%d: invalid RSJ version. Only version 1 is supported."
msgstr "%s:%d：RSJ 版本無效。僅支援第一版。"

#: src/x-ruby.c:88
#, c-format
msgid "(output from '%s')"
msgstr ""

#: src/x-sh.c:1141
#, c-format
msgid ""
"%s:%lu: warning: the syntax $\"...\" is deprecated due to security reasons; "
"use eval_gettext instead"
msgstr "%s:%lu: 警告：$\"…\" 語法因安全理由而過時；請改用 eval_gettext"

#: src/x-vala.c:616
#, c-format
msgid "%s:%d: warning: regular expression literal terminated too early"
msgstr "%s:%d：警告：正規表示式過早結束"

#: libgettextpo/gettext-po.c:84
msgid "<unnamed>"
msgstr "<未命名>"

#: libgettextpo/markup.c:366 libgettextpo/markup.c:449
msgid "invalid UTF-8 sequence"
msgstr "無效的 UTF-8 序列"

#: libgettextpo/markup.c:377
#, c-format
msgid "'%s' is not a valid name: %c"
msgstr "「%s」不是有效的名稱：%c"

#: libgettextpo/markup.c:397
#, c-format
msgid "'%s' is not a valid name: '%c'"
msgstr "「%s」不是有效的名稱：「%c」"

#: libgettextpo/markup.c:523 libgettextpo/markup.c:534
#: libgettextpo/markup.c:559
#, c-format
msgid "invalid character reference: %s"
msgstr "無效的字元引用：%s"

#: libgettextpo/markup.c:526
msgid "not a valid number specification"
msgstr "並非有效的數字規格"

#: libgettextpo/markup.c:535 libgettextpo/markup.c:606
msgid "no ending ';'"
msgstr "沒有結尾的「;」"

#: libgettextpo/markup.c:560
msgid "non-permitted character"
msgstr "不被允許的字元"

#: libgettextpo/markup.c:599
msgid "empty"
msgstr "空"

#: libgettextpo/markup.c:604
msgid "unknown"
msgstr "未知"

#: libgettextpo/markup.c:608
#, c-format
msgid "invalid entity reference: %s"
msgstr "無效的實體參考：%s"

#: libgettextpo/markup.c:959
msgid "document must begin with an element"
msgstr "檔案必須以一個元素開頭"

#: libgettextpo/markup.c:994 libgettextpo/markup.c:1301
#: libgettextpo/markup.c:1332
#, c-format
msgid "invalid character after '%s'"
msgstr "「%s」後發現無效字元"

#: libgettextpo/markup.c:1031 libgettextpo/markup.c:1107
#, c-format
msgid "missing '%c'"
msgstr "缺少「%c」"

#: libgettextpo/markup.c:1140 libgettextpo/markup.c:1176
#, c-format
msgid "missing '%c' or '%c'"
msgstr "缺少「%c」或「%c」"

#: libgettextpo/markup.c:1333
msgid "a close element name"
msgstr "閉合元素名稱"

#: libgettextpo/markup.c:1339 libgettextpo/markup.c:1344
msgid "element is closed"
msgstr "元素已閉合"

#: libgettextpo/markup.c:1475
msgid "empty document"
msgstr "空檔案"

#: libgettextpo/markup.c:1488
msgid "after '<'"
msgstr "在「<」之後"

#: libgettextpo/markup.c:1495 libgettextpo/markup.c:1527
msgid "elements still open"
msgstr "元素未閉合"

#: libgettextpo/markup.c:1500
msgid "missing '>'"
msgstr "缺少「>」"

#: libgettextpo/markup.c:1504
msgid "inside an element name"
msgstr "在元素名稱中"

#: libgettextpo/markup.c:1509
msgid "inside an attribute name"
msgstr "在屬性名稱中"

#: libgettextpo/markup.c:1513
msgid "inside an open tag"
msgstr "在未閉合標籤中"

#: libgettextpo/markup.c:1517
msgid "after '='"
msgstr "在「=」之後"

#: libgettextpo/markup.c:1522
msgid "inside an attribute value"
msgstr "在屬性值中"

#: libgettextpo/markup.c:1533
msgid "inside the close tag"
msgstr "在閉合標籤中"

#: libgettextpo/markup.c:1537
msgid "inside a comment or processing instruction"
msgstr "在註解或處理指令中"

#: libgettextpo/markup.c:1548
#, c-format
msgid "document ended unexpectedly: %s"
msgstr "檔案在非預期的位置結束：%s"

#, c-format
#~ msgid "setting permissions for %s"
#~ msgstr "設定 %s 的權限"

#~ msgid "Report bugs to <bug-gnu-gettext@gnu.org>.\n"
#~ msgstr "請向 <bug-gnu-gettext@gnu.org> 匯報錯誤。\n"

#~ msgid ""
#~ "%s:%d: Invalid multibyte sequence.\n"
#~ "Please specify the source encoding through --from-code or through a "
#~ "comment\n"
#~ "as specified in https://www.python.org/peps/pep-0263.html.\n"
#~ msgstr ""
#~ "%s:%d：無效的多位元組序列。\n"
#~ "請透過 --from-code 指定來源檔案的編碼，詳見\n"
#~ "https://www.python.org/peps/pep-0263.html。\n"

#~ msgid "%s: option '--%s' doesn't allow an argument\n"
#~ msgstr "%s：選項 --%s 不可配合參數使用\n"

#~ msgid "%s: unrecognized option '--%s'\n"
#~ msgstr "%s：無法辨識「--%s」選項\n"

#~ msgid "%s: option '-W %s' is ambiguous\n"
#~ msgstr "%s：選項「-W %s」不明確\n"

#~ msgid "%s: option '-W %s' doesn't allow an argument\n"
#~ msgstr "%s：選項「-W %s」不可配合參數使用\n"

#~ msgid "%s: option '-W %s' requires an argument\n"
#~ msgstr "%s：選項「-W %s」需要參數\n"

#~ msgid "warning: PO file header fuzzy\n"
#~ msgstr "警告：PO 檔的標頭仍然為模糊狀態\n"

#~ msgid "warning: older versions of msgfmt will give an error on this\n"
#~ msgstr "警告：較舊版本的 msgfmt 遇到此檔案時會印出錯誤訊息\n"

#, fuzzy
#~ msgid "%s:%lu:%lu: %s"
#~ msgstr "%s:%d:%d: %s"

#~ msgid ""
#~ "Language \"glade\" is not supported. %s relies on expat.\n"
#~ "This version was built without expat.\n"
#~ msgstr ""
#~ "不支援 “glade” 語言。%s 是需要 expat 軟體的，\n"
#~ "但這個版本編譯時沒有加入 expat 支援。\n"

#~ msgid "%s: illegal option -- %c\n"
#~ msgstr "%s：選項不合法 -- %c\n"

#~ msgid "DuplicateHandle failed with error code 0x%08x"
#~ msgstr "DuplicateHandle 失敗，錯誤碼為 0x%08x"

#~ msgid "The %%J directive is only allowed at the beginning of the string."
#~ msgstr "%%J 只允許在字串最開始出現。"

#~ msgid ""
#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
#~ "This is free software; see the source for copying conditions.  There is "
#~ "NO\n"
#~ "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR "
#~ "PURPOSE.\n"
#~ msgstr ""
#~ "版權所有 (C) %s Free Software Foundation, Inc.\n"
#~ "這是自由軟體；請參考原始碼的版權聲明。本軟體不提供任何保證，甚至不會包括\n"
#~ "可售性或適用於任何特定目的的保證。\n"

#~ msgid "Not yet implemented."
#~ msgstr "功能尚未編寫。"

#~ msgid "header field `%s' should start at beginning of line\n"
#~ msgstr "標頭欄位‘%s’應該位於行首\n"

#~ msgid "field `%s' still has initial default value\n"
#~ msgstr "標頭欄位‘%s’仍然是預設值\n"

#~ msgid "conversion failure"
#~ msgstr "轉換錯誤"

#~ msgid "%s: warning: "
#~ msgstr "%s：警告："

#~ msgid "%s\n"
#~ msgstr "%s\n"

#~ msgid "%s:%lu: warning: unterminated string"
#~ msgstr "%s:%lu: 警告：字串未結束"

#~ msgid "%s:%d: fatal: plural message seen before singular message\n"
#~ msgstr "%s:%d: 嚴重錯誤：複數式出現在單數式之前\n"

#~ msgid "Which is your email address?"
#~ msgstr "請問您的電子郵件地址？"

#~ msgid "Please choose the number, or enter your email address."
#~ msgstr "請選擇數字，或者自行填上電子郵件地址。"

#~ msgid "Invalid email address: invalid character."
#~ msgstr "電子郵件地址無效：字元無效。"

#~ msgid ""
#~ "Invalid email address: need a fully qualified host name or domain name."
#~ msgstr "電子郵件地址無效：需要完整的主機名稱和網域名稱。"

#~ msgid "Invalid email address: missing @"
#~ msgstr "電子郵件地址無效：缺少了 @"

#~ msgid "Is the following your email address?"
#~ msgstr "以下的是否您的電子郵件地址？"

#~ msgid "Please confirm by pressing Return, or enter your email address."
#~ msgstr "請按 [ENTER] 確認，或者自行輸入電子郵件地址。"

#~ msgid "Couldn't find out about your email address."
#~ msgstr "無法決定您的郵件位址。"

#~ msgid "Please enter your email address."
#~ msgstr "請自行輸入電子郵件地址。"