<html>
  <head>
    <meta http-equiv="content-type" content="text/html; charset=windows-1252">
  </head>
  <body>
    <p>LibRaw: Usage Examples<a href="index.html">[back to Index]</a></p>
    <h1>LibRaw: Usage Examples</h1>
    <h2>Overview of Examples in the Distribution Package (samples/*)</h2>
    <p>The LibRaw package contains several examples illustrating the use of this
      library. Their source codes are located in the samples/ folder, and after
      library build they will be in the bin/ folder:</p>
    <ul>
      <li><strong>raw-identify</strong> The only LibRaw call it uses is <a href="API-CXX.html#open_file">open_file()</a>;
        further code prints the values of the fields of the imgdata structure. <strong><br>
        </strong><strong>raw-identify -v</strong> provides extensive dump of
        metadata/<br>
        Command line key <strong>-u</strong> shows unpacking function name,
        while <strong>-u -f</strong> prints function name and masked are sizes.<br>
        <strong>raw-identify -w </strong>will print white balance tables stored
        in RAW file.</li>
      <li><strong>simple_dcraw</strong> A simple "emulation" of dcraw
        reproducing the behavior of <strong>dcraw [-e] [-v] [-T]</strong>.&nbsp;
        A simplified version of this example is <a href="#code">considered
          below</a>. <br>
        <strong>-B</strong> command-line switch turns on use of <a href="API-CXX.html#open_buffer">open_buffer()
          API call</a> used via mmap() of input file (Unix only).</li>
      <li><strong>dcraw_half</strong> Demonstrates the use of <a href="API-C.html">C
          API</a>. The example emulates the behavior of <strong>dcraw -h</strong>
        (no other control parameters can be specified in this example). </li>
      <li><strong>dcraw_emu</strong> Almost complete emulation of dcraw (except for
        keys -D -d -E -i -v -e, which are considered in other usage examples).
        Of most interest is processing of command line keys (copied from dcraw).
        <br>
        <p>This sample supports additional command-line parameters absent in
          original dcraw:</p>
        <dl>
          <dt><strong>-mmap</strong></dt>
          <dd>Use <a href="API-CXX.html#open_buffer">open_buffer()</a>
            interface. Buffer prepared by mmap() call. This option not supported
            under Win32.</dd>
          <dt><strong>-meme</strong></dt>
          <dd>Use <a href="API-CXX.html#open_buffer">open_buffer()</a>
            interface. Buffer prepared by malloc()+read() calls.</dd>
          <dt><strong>-c float-value</strong></dt>
          <dd>This key sets <strong>params.adjust_maximum_thr</strong>
            parameter.<br>
            Use -c 0 to completely disable automatic maximum calculation. <br>
            Default value: 0.75</dd>
          <dt><strong>-timing</strong></dt>
          <dd>Turns on detailed timing print.</dd>
          <dt><strong>-G</strong></dt>
          <dd>Turns on "green_matching" mode to suppress color mazes on cameras
            with different green channels.</dd>
          <dt><strong>-B x y w h</strong></dt>
          <dd>Crops output to rectangle with width w, height h and x,y
            coordinates of left upper corner. All coordinates applied before any
            image rotation.</dd>
          <dt><strong>-F</strong></dt>
          <dd>Will use FILE I/O (bigfile_datastream) instead on standard
            LibRaw_file_datastream.</dd>
          <dt><strong>-dcbi N</strong></dt>
          <dd>Sets number of additional DCB-demosaic iterations (option valid
            only for -q 4, i.e. for DCB demosaic).</dd>
          <dt><strong>-dcbe</strong></dt>
          <dd>Turns on DCB color enhance mode (only for DCB demosaic, -q 4).</dd>
          <dt><strong>-aexpo e p</strong></dt>
          <dd>Turns on exposure correction. e is exposure shift in linear scale
            from 0.25 (darken 2 stops) to 8.0 (lighten 3 stops). p is highlights
            preservation amount from 0.0 (no preservation, full clipping) to 1.0
            (full preservation, S-like curve in highlights).</dd>
          <dt><strong>-apentax4shot</strong></dt>
          <dd>Will merge 4 frames from Pentax 4-shot RAWs</dd>
          <dt><strong>-apentax4shotorder abce</strong></dt>
          <dd>Order of frames in pentax 4-shot files (default is 3102)</dd>
          <dt><strong>-mmap</strong></dt>
          <dd>Use mmap + memory IO instead of file IO (unix only)</dd>
          <dt><strong>-disars</strong></dt>
          <dd>Disable RawSpeed library (if compiled with this library)</dd>
          <dt><strong>-doutputflags N</strong></dt>
          <dd>set imgdata.params.output_flags to N</dd>
          <dt><strong>-disinterp</strong></dt>
          <dd>Do not run interpolation step</dd>
          <dt><strong>-dsrawrgb1</strong></dt>
          <dd>Disable YCbCr to RGB conversion for sRAW (Cb/Cr interpolation
            enabled)</dd>
          <dt><strong>-dsrawrgb2</strong></dt>
          <dd>Disable YCbCr to RGB conversion for sRAW (Cb/Cr interpolation
            disabled)</dd>
        </dl>
      </li>
      <li><strong>half_mt</strong> Emulation of <strong>dcraw -h</strong>. It
        "understands" the following keys: -a (automatic white balance over the
        entire image), -w (white balance of the camera), -T (output in the tiff
        format), and -J n (number of parallel threads launched for image
        processing).<br>
        On multiprocessor/multicore computers, the speed gain is notable in the
        case of mass processing. On a Win32 machine, the example is assembled
        from the initial file half_mt_win32.c, since work with threads under
        Windows is fundamentally different and it it easier to copy simple
        source codes than write one complex code.</li>
      <li><strong>mem_image</strong> This sample uses <a href="API-CXX.html#dcraw_make_mem_image">dcraw_make_mem_image</a>
        and <a href="API-CXX.html#dcraw_make_mem_thumb">dcraw_make_mem_thumb</a>
        calls, than writes data in PPM format. </li>
      <li><strong>unprocessed_raw</strong> This sample extracts (mostly)
        unaltered RAW data including masked pixels data (on supported cameras).
        If black frame exists and black frame extraction is supported for given
        format, masked pixels data is added to resulting .TIFF file. Command
        line options: <strong>-q</strong> - be quiet, <strong>-A</strong> -
        autoscale data (integer multiplier), <strong>-g</strong>
        gamma-correction (gamma 2.2) for data (instead of precise linear one), <strong>-B</strong>
        turns on black level subtraction</li>
      <li><strong>4channnels</strong> - splits RAW-file into four separate
        16-bit grayscale TIFFs (per RAW channel).<br>
        Command line switches:
        <ul>
          <li><strong>-s N</strong> selects N-th image from RAW with multiple
            images</li>
          <li><strong>-g</strong> gamma correction (gamma 2.2)</li>
          <li><strong>-A</strong> values autoscale by auto-calculated integer
            factor</li>
          <li><strong>-B</strong> turn off black subtraction</li>
          <li><strong>-N</strong> no RAW curve</li>
        </ul>
      </li>
      <li><strong>multirender_test</strong> - very simple example of multiple
        rendering on one file without reopen.</li>
      <li><strong>postprocessing_benchmark</strong> - will print timings of RAW
        processing steps</li>
    </ul>
    <h2>Example of docmode</h2>
    <p>Below we consider the samples/simple_dcraw.cpp example, which emulates
      the behavior of <strong>dcraw [-e][-v][-t]</strong>. To save space, let
      us assume that keys -t -v are always specified (to avoid comments on
      command line parsing) and there is always one parameter (name of file),
      which is the only one and always passed to the program.</p>
    <pre>int main(int ac, char *av[])
{
 int i, ret, verbose=0, output_thumbs=0;
 char outfn[1024],thumbfn[1024];
 // Creation of image processing object
 LibRaw RawProcessor;
 // The date in TIFF is written in the local format; let us specify the timezone for compatibility with dcraw
 putenv ((char*)"TZ=UTC");
// Let us define variables for convenient access to fields of RawProcessor
#define P1 RawProcessor.imgdata.idata
#define S RawProcessor.imgdata.sizes
#define C RawProcessor.imgdata.color
#define T RawProcessor.imgdata.thumbnail
#define P2 RawProcessor.imgdata.other
#define OUT RawProcessor.imgdata.params
 OUT.output_tiff = 1; // Let us output TIFF
 // Let us open the file
 if( (ret = RawProcessor.open_file(av[1])) != LIBRAW_SUCCESS)
 {
 fprintf(stderr,"Cannot open %s: %s\n",av[i],libraw_strerror(ret));
 // recycle() is needed only if we want to free the resources right now.
 // If we process files in a cycle, the next open_file()
 // will also call recycle(). If a fatal error has happened, it means that recycle()
 // has already been called (repeated call will not cause any harm either).
 RawProcessor.recycle();
 goto end;
 }
 // Let us unpack the image
 if( (ret = RawProcessor.unpack() ) != LIBRAW_SUCCESS)
 {
 fprintf(stderr,"Cannot unpack_thumb %s: %s\n",av[i],libraw_strerror(ret));
 if(LIBRAW_FATAL_ERROR(ret))
 goto end;
 // if there has been a non-fatal error, we will try to continue
 }
 // Let us unpack the thumbnail
 if( (ret = RawProcessor.unpack_thumb() ) != LIBRAW_SUCCESS)
 {
 // error processing is completely similar to the previous case
 fprintf(stderr,"Cannot unpack_thumb %s: %s\n",av[i],libraw_strerror(ret));
 if(LIBRAW_FATAL_ERROR(ret))
 goto end;
 }
 else // We have successfully unpacked the thumbnail, now let us write it to a file
 {
 snprintf(thumbfn,sizeof(thumbfn),"%s.%s",av[i],T.tformat == LIBRAW_THUMBNAIL_JPEG ? "thumb.jpg" : "thumb.ppm");
 if( LIBRAW_SUCCESS != (ret = RawProcessor.dcraw_thumb_writer(thumbfn)))
 {
 fprintf(stderr,"Cannot write %s: %s\n",thumbfn,libraw_strerror(ret));
 // in the case of fatal error, we should terminate processing of the current file
 if(LIBRAW_FATAL_ERROR(ret))
 goto end;
 }
 }
 // Data unpacking
 ret = RawProcessor.dcraw_process();
 if(LIBRAW_SUCCESS != ret ) // error at the previous step
 {
 fprintf(stderr,"Cannot do postprocessing on %s: %s\n",av[i],libraw_strerror(ret));
 if(LIBRAW_FATAL_ERROR(ret))
 goto end;
 }
 else // Successful document processing
 {
 snprintf(outfn,sizeof(outfn),"%s.%s", av[i], "tiff");
 if( LIBRAW_SUCCESS != (ret = RawProcessor.dcraw_ppm_tiff_writer(outfn)))
 fprintf(stderr,"Cannot write %s: error %d\n",outfn,ret);
 }
 // we don't evoke recycle() or call the destructor; C++ will do everything for us
 return 0;
end:
 // got here after an error
 return 1;
}
</pre>
    <p><a href="index.html">[back to Index]</a></p>
  </body>
</html>