| /* |
| * Public libusb header file |
| * Copyright © 2001 Johannes Erdfelt <johannes@erdfelt.com> |
| * Copyright © 2007-2008 Daniel Drake <dsd@gentoo.org> |
| * Copyright © 2012 Pete Batard <pete@akeo.ie> |
| * Copyright © 2012-2018 Nathan Hjelm <hjelmn@cs.unm.edu> |
| * For more information, please visit: http://libusb.info |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2.1 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #ifndef LIBUSB_H |
| #define LIBUSB_H |
| |
| #ifdef _MSC_VER |
| /* on MS environments, the inline keyword is available in C++ only */ |
| #if !defined(__cplusplus) |
| #define inline __inline |
| #endif |
| /* ssize_t is also not available (copy/paste from MinGW) */ |
| #ifndef _SSIZE_T_DEFINED |
| #define _SSIZE_T_DEFINED |
| #undef ssize_t |
| #ifdef _WIN64 |
| typedef __int64 ssize_t; |
| #else |
| typedef int ssize_t; |
| #endif /* _WIN64 */ |
| #endif /* _SSIZE_T_DEFINED */ |
| #endif /* _MSC_VER */ |
| |
| /* stdint.h is not available on older MSVC */ |
| #if defined(_MSC_VER) && (_MSC_VER < 1600) && (!defined(_STDINT)) && (!defined(_STDINT_H)) |
| typedef unsigned __int8 uint8_t; |
| typedef unsigned __int16 uint16_t; |
| typedef unsigned __int32 uint32_t; |
| #else |
| #include <stdint.h> |
| #endif |
| |
| #if !defined(_WIN32_WCE) |
| #include <sys/types.h> |
| #endif |
| |
| #if defined(__linux__) || defined(__APPLE__) || defined(__CYGWIN__) || defined(__HAIKU__) |
| #include <sys/time.h> |
| #endif |
| |
| #include <time.h> |
| #include <limits.h> |
| |
| #if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) |
| #define ZERO_SIZED_ARRAY /* [] - valid C99 code */ |
| #else |
| #define ZERO_SIZED_ARRAY 0 /* [0] - non-standard, but usually working code */ |
| #endif |
| |
| /* 'interface' might be defined as a macro on Windows, so we need to |
| * undefine it so as not to break the current libusb API, because |
| * libusb_config_descriptor has an 'interface' member |
| * As this can be problematic if you include windows.h after libusb.h |
| * in your sources, we force windows.h to be included first. */ |
| #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) |
| #include <windows.h> |
| #if defined(interface) |
| #undef interface |
| #endif |
| #if !defined(__CYGWIN__) |
| #include <winsock.h> |
| #endif |
| #endif |
| |
| #if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) |
| #define LIBUSB_DEPRECATED_FOR(f) \ |
| __attribute__((deprecated("Use " #f " instead"))) |
| #elif __GNUC__ >= 3 |
| #define LIBUSB_DEPRECATED_FOR(f) __attribute__((deprecated)) |
| #else |
| #define LIBUSB_DEPRECATED_FOR(f) |
| #endif /* __GNUC__ */ |
| |
| /** \def LIBUSB_CALL |
| * \ingroup libusb_misc |
| * libusb's Windows calling convention. |
| * |
| * Under Windows, the selection of available compilers and configurations |
| * means that, unlike other platforms, there is not <em>one true calling |
| * convention</em> (calling convention: the manner in which parameters are |
| * passed to functions in the generated assembly code). |
| * |
| * Matching the Windows API itself, libusb uses the WINAPI convention (which |
| * translates to the <tt>stdcall</tt> convention) and guarantees that the |
| * library is compiled in this way. The public header file also includes |
| * appropriate annotations so that your own software will use the right |
| * convention, even if another convention is being used by default within |
| * your codebase. |
| * |
| * The one consideration that you must apply in your software is to mark |
| * all functions which you use as libusb callbacks with this LIBUSB_CALL |
| * annotation, so that they too get compiled for the correct calling |
| * convention. |
| * |
| * On non-Windows operating systems, this macro is defined as nothing. This |
| * means that you can apply it to your code without worrying about |
| * cross-platform compatibility. |
| */ |
| /* LIBUSB_CALL must be defined on both definition and declaration of libusb |
| * functions. You'd think that declaration would be enough, but cygwin will |
| * complain about conflicting types unless both are marked this way. |
| * The placement of this macro is important too; it must appear after the |
| * return type, before the function name. See internal documentation for |
| * API_EXPORTED. |
| */ |
| #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) |
| #define LIBUSB_CALL WINAPI |
| #else |
| #define LIBUSB_CALL |
| #endif |
| |
| /** \def LIBUSB_API_VERSION |
| * \ingroup libusb_misc |
| * libusb's API version. |
| * |
| * Since version 1.0.13, to help with feature detection, libusb defines |
| * a LIBUSB_API_VERSION macro that gets increased every time there is a |
| * significant change to the API, such as the introduction of a new call, |
| * the definition of a new macro/enum member, or any other element that |
| * libusb applications may want to detect at compilation time. |
| * |
| * The macro is typically used in an application as follows: |
| * \code |
| * #if defined(LIBUSB_API_VERSION) && (LIBUSB_API_VERSION >= 0x01001234) |
| * // Use one of the newer features from the libusb API |
| * #endif |
| * \endcode |
| * |
| * Internally, LIBUSB_API_VERSION is defined as follows: |
| * (libusb major << 24) | (libusb minor << 16) | (16 bit incremental) |
| */ |
| #define LIBUSB_API_VERSION 0x01000107 |
| |
| /* The following is kept for compatibility, but will be deprecated in the future */ |
| #define LIBUSBX_API_VERSION LIBUSB_API_VERSION |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /** |
| * \ingroup libusb_misc |
| * Convert a 16-bit value from host-endian to little-endian format. On |
| * little endian systems, this function does nothing. On big endian systems, |
| * the bytes are swapped. |
| * \param x the host-endian value to convert |
| * \returns the value in little-endian byte order |
| */ |
| static inline uint16_t libusb_cpu_to_le16(const uint16_t x) |
| { |
| union { |
| uint8_t b8[2]; |
| uint16_t b16; |
| } _tmp; |
| _tmp.b8[1] = (uint8_t) (x >> 8); |
| _tmp.b8[0] = (uint8_t) (x & 0xff); |
| return _tmp.b16; |
| } |
| |
| /** \def libusb_le16_to_cpu |
| * \ingroup libusb_misc |
| * Convert a 16-bit value from little-endian to host-endian format. On |
| * little endian systems, this function does nothing. On big endian systems, |
| * the bytes are swapped. |
| * \param x the little-endian value to convert |
| * \returns the value in host-endian byte order |
| */ |
| #define libusb_le16_to_cpu libusb_cpu_to_le16 |
| |
| /* standard USB stuff */ |
| |
| /** \ingroup libusb_desc |
| * Device and/or Interface Class codes */ |
| enum libusb_class_code { |
| /** In the context of a \ref libusb_device_descriptor "device descriptor", |
| * this bDeviceClass value indicates that each interface specifies its |
| * own class information and all interfaces operate independently. |
| */ |
| LIBUSB_CLASS_PER_INTERFACE = 0, |
| |
| /** Audio class */ |
| LIBUSB_CLASS_AUDIO = 1, |
| |
| /** Communications class */ |
| LIBUSB_CLASS_COMM = 2, |
| |
| /** Human Interface Device class */ |
| LIBUSB_CLASS_HID = 3, |
| |
| /** Physical */ |
| LIBUSB_CLASS_PHYSICAL = 5, |
| |
| /** Printer class */ |
| LIBUSB_CLASS_PRINTER = 7, |
| |
| /** Image class */ |
| LIBUSB_CLASS_PTP = 6, /* legacy name from libusb-0.1 usb.h */ |
| LIBUSB_CLASS_IMAGE = 6, |
| |
| /** Mass storage class */ |
| LIBUSB_CLASS_MASS_STORAGE = 8, |
| |
| /** Hub class */ |
| LIBUSB_CLASS_HUB = 9, |
| |
| /** Data class */ |
| LIBUSB_CLASS_DATA = 10, |
| |
| /** Smart Card */ |
| LIBUSB_CLASS_SMART_CARD = 0x0b, |
| |
| /** Content Security */ |
| LIBUSB_CLASS_CONTENT_SECURITY = 0x0d, |
| |
| /** Video */ |
| LIBUSB_CLASS_VIDEO = 0x0e, |
| |
| /** Personal Healthcare */ |
| LIBUSB_CLASS_PERSONAL_HEALTHCARE = 0x0f, |
| |
| /** Diagnostic Device */ |
| LIBUSB_CLASS_DIAGNOSTIC_DEVICE = 0xdc, |
| |
| /** Wireless class */ |
| LIBUSB_CLASS_WIRELESS = 0xe0, |
| |
| /** Application class */ |
| LIBUSB_CLASS_APPLICATION = 0xfe, |
| |
| /** Class is vendor-specific */ |
| LIBUSB_CLASS_VENDOR_SPEC = 0xff |
| }; |
| |
| /** \ingroup libusb_desc |
| * Descriptor types as defined by the USB specification. */ |
| enum libusb_descriptor_type { |
| /** Device descriptor. See libusb_device_descriptor. */ |
| LIBUSB_DT_DEVICE = 0x01, |
| |
| /** Configuration descriptor. See libusb_config_descriptor. */ |
| LIBUSB_DT_CONFIG = 0x02, |
| |
| /** String descriptor */ |
| LIBUSB_DT_STRING = 0x03, |
| |
| /** Interface descriptor. See libusb_interface_descriptor. */ |
| LIBUSB_DT_INTERFACE = 0x04, |
| |
| /** Endpoint descriptor. See libusb_endpoint_descriptor. */ |
| LIBUSB_DT_ENDPOINT = 0x05, |
| |
| /** BOS descriptor */ |
| LIBUSB_DT_BOS = 0x0f, |
| |
| /** Device Capability descriptor */ |
| LIBUSB_DT_DEVICE_CAPABILITY = 0x10, |
| |
| /** HID descriptor */ |
| LIBUSB_DT_HID = 0x21, |
| |
| /** HID report descriptor */ |
| LIBUSB_DT_REPORT = 0x22, |
| |
| /** Physical descriptor */ |
| LIBUSB_DT_PHYSICAL = 0x23, |
| |
| /** Hub descriptor */ |
| LIBUSB_DT_HUB = 0x29, |
| |
| /** SuperSpeed Hub descriptor */ |
| LIBUSB_DT_SUPERSPEED_HUB = 0x2a, |
| |
| /** SuperSpeed Endpoint Companion descriptor */ |
| LIBUSB_DT_SS_ENDPOINT_COMPANION = 0x30 |
| }; |
| |
| /* Descriptor sizes per descriptor type */ |
| #define LIBUSB_DT_DEVICE_SIZE 18 |
| #define LIBUSB_DT_CONFIG_SIZE 9 |
| #define LIBUSB_DT_INTERFACE_SIZE 9 |
| #define LIBUSB_DT_ENDPOINT_SIZE 7 |
| #define LIBUSB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ |
| #define LIBUSB_DT_HUB_NONVAR_SIZE 7 |
| #define LIBUSB_DT_SS_ENDPOINT_COMPANION_SIZE 6 |
| #define LIBUSB_DT_BOS_SIZE 5 |
| #define LIBUSB_DT_DEVICE_CAPABILITY_SIZE 3 |
| |
| /* BOS descriptor sizes */ |
| #define LIBUSB_BT_USB_2_0_EXTENSION_SIZE 7 |
| #define LIBUSB_BT_SS_USB_DEVICE_CAPABILITY_SIZE 10 |
| #define LIBUSB_BT_CONTAINER_ID_SIZE 20 |
| |
| /* We unwrap the BOS => define its max size */ |
| #define LIBUSB_DT_BOS_MAX_SIZE ((LIBUSB_DT_BOS_SIZE) +\ |
| (LIBUSB_BT_USB_2_0_EXTENSION_SIZE) +\ |
| (LIBUSB_BT_SS_USB_DEVICE_CAPABILITY_SIZE) +\ |
| (LIBUSB_BT_CONTAINER_ID_SIZE)) |
| |
| #define LIBUSB_ENDPOINT_ADDRESS_MASK 0x0f /* in bEndpointAddress */ |
| #define LIBUSB_ENDPOINT_DIR_MASK 0x80 |
| |
| /** \ingroup libusb_desc |
| * Endpoint direction. Values for bit 7 of the |
| * \ref libusb_endpoint_descriptor::bEndpointAddress "endpoint address" scheme. |
| */ |
| enum libusb_endpoint_direction { |
| /** In: device-to-host */ |
| LIBUSB_ENDPOINT_IN = 0x80, |
| |
| /** Out: host-to-device */ |
| LIBUSB_ENDPOINT_OUT = 0x00 |
| }; |
| |
| #define LIBUSB_TRANSFER_TYPE_MASK 0x03 /* in bmAttributes */ |
| |
| /** \ingroup libusb_desc |
| * Endpoint transfer type. Values for bits 0:1 of the |
| * \ref libusb_endpoint_descriptor::bmAttributes "endpoint attributes" field. |
| */ |
| enum libusb_transfer_type { |
| /** Control endpoint */ |
| LIBUSB_TRANSFER_TYPE_CONTROL = 0, |
| |
| /** Isochronous endpoint */ |
| LIBUSB_TRANSFER_TYPE_ISOCHRONOUS = 1, |
| |
| /** Bulk endpoint */ |
| LIBUSB_TRANSFER_TYPE_BULK = 2, |
| |
| /** Interrupt endpoint */ |
| LIBUSB_TRANSFER_TYPE_INTERRUPT = 3, |
| |
| /** Stream endpoint */ |
| LIBUSB_TRANSFER_TYPE_BULK_STREAM = 4, |
| }; |
| |
| /** \ingroup libusb_misc |
| * Standard requests, as defined in table 9-5 of the USB 3.0 specifications */ |
| enum libusb_standard_request { |
| /** Request status of the specific recipient */ |
| LIBUSB_REQUEST_GET_STATUS = 0x00, |
| |
| /** Clear or disable a specific feature */ |
| LIBUSB_REQUEST_CLEAR_FEATURE = 0x01, |
| |
| /* 0x02 is reserved */ |
| |
| /** Set or enable a specific feature */ |
| LIBUSB_REQUEST_SET_FEATURE = 0x03, |
| |
| /* 0x04 is reserved */ |
| |
| /** Set device address for all future accesses */ |
| LIBUSB_REQUEST_SET_ADDRESS = 0x05, |
| |
| /** Get the specified descriptor */ |
| LIBUSB_REQUEST_GET_DESCRIPTOR = 0x06, |
| |
| /** Used to update existing descriptors or add new descriptors */ |
| LIBUSB_REQUEST_SET_DESCRIPTOR = 0x07, |
| |
| /** Get the current device configuration value */ |
| LIBUSB_REQUEST_GET_CONFIGURATION = 0x08, |
| |
| /** Set device configuration */ |
| LIBUSB_REQUEST_SET_CONFIGURATION = 0x09, |
| |
| /** Return the selected alternate setting for the specified interface */ |
| LIBUSB_REQUEST_GET_INTERFACE = 0x0A, |
| |
| /** Select an alternate interface for the specified interface */ |
| LIBUSB_REQUEST_SET_INTERFACE = 0x0B, |
| |
| /** Set then report an endpoint's synchronization frame */ |
| LIBUSB_REQUEST_SYNCH_FRAME = 0x0C, |
| |
| /** Sets both the U1 and U2 Exit Latency */ |
| LIBUSB_REQUEST_SET_SEL = 0x30, |
| |
| /** Delay from the time a host transmits a packet to the time it is |
| * received by the device. */ |
| LIBUSB_SET_ISOCH_DELAY = 0x31, |
| }; |
| |
| /** \ingroup libusb_misc |
| * Request type bits of the |
| * \ref libusb_control_setup::bmRequestType "bmRequestType" field in control |
| * transfers. */ |
| enum libusb_request_type { |
| /** Standard */ |
| LIBUSB_REQUEST_TYPE_STANDARD = (0x00 << 5), |
| |
| /** Class */ |
| LIBUSB_REQUEST_TYPE_CLASS = (0x01 << 5), |
| |
| /** Vendor */ |
| LIBUSB_REQUEST_TYPE_VENDOR = (0x02 << 5), |
| |
| /** Reserved */ |
| LIBUSB_REQUEST_TYPE_RESERVED = (0x03 << 5) |
| }; |
| |
| /** \ingroup libusb_misc |
| * Recipient bits of the |
| * \ref libusb_control_setup::bmRequestType "bmRequestType" field in control |
| * transfers. Values 4 through 31 are reserved. */ |
| enum libusb_request_recipient { |
| /** Device */ |
| LIBUSB_RECIPIENT_DEVICE = 0x00, |
| |
| /** Interface */ |
| LIBUSB_RECIPIENT_INTERFACE = 0x01, |
| |
| /** Endpoint */ |
| LIBUSB_RECIPIENT_ENDPOINT = 0x02, |
| |
| /** Other */ |
| LIBUSB_RECIPIENT_OTHER = 0x03, |
| }; |
| |
| #define LIBUSB_ISO_SYNC_TYPE_MASK 0x0C |
| |
| /** \ingroup libusb_desc |
| * Synchronization type for isochronous endpoints. Values for bits 2:3 of the |
| * \ref libusb_endpoint_descriptor::bmAttributes "bmAttributes" field in |
| * libusb_endpoint_descriptor. |
| */ |
| enum libusb_iso_sync_type { |
| /** No synchronization */ |
| LIBUSB_ISO_SYNC_TYPE_NONE = 0, |
| |
| /** Asynchronous */ |
| LIBUSB_ISO_SYNC_TYPE_ASYNC = 1, |
| |
| /** Adaptive */ |
| LIBUSB_ISO_SYNC_TYPE_ADAPTIVE = 2, |
| |
| /** Synchronous */ |
| LIBUSB_ISO_SYNC_TYPE_SYNC = 3 |
| }; |
| |
| #define LIBUSB_ISO_USAGE_TYPE_MASK 0x30 |
| |
| /** \ingroup libusb_desc |
| * Usage type for isochronous endpoints. Values for bits 4:5 of the |
| * \ref libusb_endpoint_descriptor::bmAttributes "bmAttributes" field in |
| * libusb_endpoint_descriptor. |
| */ |
| enum libusb_iso_usage_type { |
| /** Data endpoint */ |
| LIBUSB_ISO_USAGE_TYPE_DATA = 0, |
| |
| /** Feedback endpoint */ |
| LIBUSB_ISO_USAGE_TYPE_FEEDBACK = 1, |
| |
| /** Implicit feedback Data endpoint */ |
| LIBUSB_ISO_USAGE_TYPE_IMPLICIT = 2, |
| }; |
| |
| /** \ingroup libusb_desc |
| * A structure representing the standard USB device descriptor. This |
| * descriptor is documented in section 9.6.1 of the USB 3.0 specification. |
| * All multiple-byte fields are represented in host-endian format. |
| */ |
| struct libusb_device_descriptor { |
| /** Size of this descriptor (in bytes) */ |
| uint8_t bLength; |
| |
| /** Descriptor type. Will have value |
| * \ref libusb_descriptor_type::LIBUSB_DT_DEVICE LIBUSB_DT_DEVICE in this |
| * context. */ |
| uint8_t bDescriptorType; |
| |
| /** USB specification release number in binary-coded decimal. A value of |
| * 0x0200 indicates USB 2.0, 0x0110 indicates USB 1.1, etc. */ |
| uint16_t bcdUSB; |
| |
| /** USB-IF class code for the device. See \ref libusb_class_code. */ |
| uint8_t bDeviceClass; |
| |
| /** USB-IF subclass code for the device, qualified by the bDeviceClass |
| * value */ |
| uint8_t bDeviceSubClass; |
| |
| /** USB-IF protocol code for the device, qualified by the bDeviceClass and |
| * bDeviceSubClass values */ |
| uint8_t bDeviceProtocol; |
| |
| /** Maximum packet size for endpoint 0 */ |
| uint8_t bMaxPacketSize0; |
| |
| /** USB-IF vendor ID */ |
| uint16_t idVendor; |
| |
| /** USB-IF product ID */ |
| uint16_t idProduct; |
| |
| /** Device release number in binary-coded decimal */ |
| uint16_t bcdDevice; |
| |
| /** Index of string descriptor describing manufacturer */ |
| uint8_t iManufacturer; |
| |
| /** Index of string descriptor describing product */ |
| uint8_t iProduct; |
| |
| /** Index of string descriptor containing device serial number */ |
| uint8_t iSerialNumber; |
| |
| /** Number of possible configurations */ |
| uint8_t bNumConfigurations; |
| }; |
| |
| /** \ingroup libusb_desc |
| * A structure representing the standard USB endpoint descriptor. This |
| * descriptor is documented in section 9.6.6 of the USB 3.0 specification. |
| * All multiple-byte fields are represented in host-endian format. |
| */ |
| struct libusb_endpoint_descriptor { |
| /** Size of this descriptor (in bytes) */ |
| uint8_t bLength; |
| |
| /** Descriptor type. Will have value |
| * \ref libusb_descriptor_type::LIBUSB_DT_ENDPOINT LIBUSB_DT_ENDPOINT in |
| * this context. */ |
| uint8_t bDescriptorType; |
| |
| /** The address of the endpoint described by this descriptor. Bits 0:3 are |
| * the endpoint number. Bits 4:6 are reserved. Bit 7 indicates direction, |
| * see \ref libusb_endpoint_direction. |
| */ |
| uint8_t bEndpointAddress; |
| |
| /** Attributes which apply to the endpoint when it is configured using |
| * the bConfigurationValue. Bits 0:1 determine the transfer type and |
| * correspond to \ref libusb_transfer_type. Bits 2:3 are only used for |
| * isochronous endpoints and correspond to \ref libusb_iso_sync_type. |
| * Bits 4:5 are also only used for isochronous endpoints and correspond to |
| * \ref libusb_iso_usage_type. Bits 6:7 are reserved. |
| */ |
| uint8_t bmAttributes; |
| |
| /** Maximum packet size this endpoint is capable of sending/receiving. */ |
| uint16_t wMaxPacketSize; |
| |
| /** Interval for polling endpoint for data transfers. */ |
| uint8_t bInterval; |
| |
| /** For audio devices only: the rate at which synchronization feedback |
| * is provided. */ |
| uint8_t bRefresh; |
| |
| /** For audio devices only: the address if the synch endpoint */ |
| uint8_t bSynchAddress; |
| |
| /** Extra descriptors. If libusb encounters unknown endpoint descriptors, |
| * it will store them here, should you wish to parse them. */ |
| const unsigned char *extra; |
| |
| /** Length of the extra descriptors, in bytes. Must be non-negative. */ |
| int extra_length; |
| }; |
| |
| /** \ingroup libusb_desc |
| * A structure representing the standard USB interface descriptor. This |
| * descriptor is documented in section 9.6.5 of the USB 3.0 specification. |
| * All multiple-byte fields are represented in host-endian format. |
| */ |
| struct libusb_interface_descriptor { |
| /** Size of this descriptor (in bytes) */ |
| uint8_t bLength; |
| |
| /** Descriptor type. Will have value |
| * \ref libusb_descriptor_type::LIBUSB_DT_INTERFACE LIBUSB_DT_INTERFACE |
| * in this context. */ |
| uint8_t bDescriptorType; |
| |
| /** Number of this interface */ |
| uint8_t bInterfaceNumber; |
| |
| /** Value used to select this alternate setting for this interface */ |
| uint8_t bAlternateSetting; |
| |
| /** Number of endpoints used by this interface (excluding the control |
| * endpoint). */ |
| uint8_t bNumEndpoints; |
| |
| /** USB-IF class code for this interface. See \ref libusb_class_code. */ |
| uint8_t bInterfaceClass; |
| |
| /** USB-IF subclass code for this interface, qualified by the |
| * bInterfaceClass value */ |
| uint8_t bInterfaceSubClass; |
| |
| /** USB-IF protocol code for this interface, qualified by the |
| * bInterfaceClass and bInterfaceSubClass values */ |
| uint8_t bInterfaceProtocol; |
| |
| /** Index of string descriptor describing this interface */ |
| uint8_t iInterface; |
| |
| /** Array of endpoint descriptors. This length of this array is determined |
| * by the bNumEndpoints field. */ |
| const struct libusb_endpoint_descriptor *endpoint; |
| |
| /** Extra descriptors. If libusb encounters unknown interface descriptors, |
| * it will store them here, should you wish to parse them. */ |
| const unsigned char *extra; |
| |
| /** Length of the extra descriptors, in bytes. Must be non-negative. */ |
| int extra_length; |
| }; |
| |
| /** \ingroup libusb_desc |
| * A collection of alternate settings for a particular USB interface. |
| */ |
| struct libusb_interface { |
| /** Array of interface descriptors. The length of this array is determined |
| * by the num_altsetting field. */ |
| const struct libusb_interface_descriptor *altsetting; |
| |
| /** The number of alternate settings that belong to this interface. |
| * Must be non-negative. */ |
| int num_altsetting; |
| }; |
| |
| /** \ingroup libusb_desc |
| * A structure representing the standard USB configuration descriptor. This |
| * descriptor is documented in section 9.6.3 of the USB 3.0 specification. |
| * All multiple-byte fields are represented in host-endian format. |
| */ |
| struct libusb_config_descriptor { |
| /** Size of this descriptor (in bytes) */ |
| uint8_t bLength; |
| |
| /** Descriptor type. Will have value |
| * \ref libusb_descriptor_type::LIBUSB_DT_CONFIG LIBUSB_DT_CONFIG |
| * in this context. */ |
| uint8_t bDescriptorType; |
| |
| /** Total length of data returned for this configuration */ |
| uint16_t wTotalLength; |
| |
| /** Number of interfaces supported by this configuration */ |
| uint8_t bNumInterfaces; |
| |
| /** Identifier value for this configuration */ |
| uint8_t bConfigurationValue; |
| |
| /** Index of string descriptor describing this configuration */ |
| uint8_t iConfiguration; |
| |
| /** Configuration characteristics */ |
| uint8_t bmAttributes; |
| |
| /** Maximum power consumption of the USB device from this bus in this |
| * configuration when the device is fully operation. Expressed in units |
| * of 2 mA when the device is operating in high-speed mode and in units |
| * of 8 mA when the device is operating in super-speed mode. */ |
| uint8_t MaxPower; |
| |
| /** Array of interfaces supported by this configuration. The length of |
| * this array is determined by the bNumInterfaces field. */ |
| const struct libusb_interface *interface; |
| |
| /** Extra descriptors. If libusb encounters unknown configuration |
| * descriptors, it will store them here, should you wish to parse them. */ |
| const unsigned char *extra; |
| |
| /** Length of the extra descriptors, in bytes. Must be non-negative. */ |
| int extra_length; |
| }; |
| |
| /** \ingroup libusb_desc |
| * A structure representing the superspeed endpoint companion |
| * descriptor. This descriptor is documented in section 9.6.7 of |
| * the USB 3.0 specification. All multiple-byte fields are represented in |
| * host-endian format. |
| */ |
| struct libusb_ss_endpoint_companion_descriptor { |
| |
| /** Size of this descriptor (in bytes) */ |
| uint8_t bLength; |
| |
| /** Descriptor type. Will have value |
| * \ref libusb_descriptor_type::LIBUSB_DT_SS_ENDPOINT_COMPANION in |
| * this context. */ |
| uint8_t bDescriptorType; |
| |
| |
| /** The maximum number of packets the endpoint can send or |
| * receive as part of a burst. */ |
| uint8_t bMaxBurst; |
| |
| /** In bulk EP: bits 4:0 represents the maximum number of |
| * streams the EP supports. In isochronous EP: bits 1:0 |
| * represents the Mult - a zero based value that determines |
| * the maximum number of packets within a service interval */ |
| uint8_t bmAttributes; |
| |
| /** The total number of bytes this EP will transfer every |
| * service interval. valid only for periodic EPs. */ |
| uint16_t wBytesPerInterval; |
| }; |
| |
| /** \ingroup libusb_desc |
| * A generic representation of a BOS Device Capability descriptor. It is |
| * advised to check bDevCapabilityType and call the matching |
| * libusb_get_*_descriptor function to get a structure fully matching the type. |
| */ |
| struct libusb_bos_dev_capability_descriptor { |
| /** Size of this descriptor (in bytes) */ |
| uint8_t bLength; |
| /** Descriptor type. Will have value |
| * \ref libusb_descriptor_type::LIBUSB_DT_DEVICE_CAPABILITY |
| * LIBUSB_DT_DEVICE_CAPABILITY in this context. */ |
| uint8_t bDescriptorType; |
| /** Device Capability type */ |
| uint8_t bDevCapabilityType; |
| /** Device Capability data (bLength - 3 bytes) */ |
| uint8_t dev_capability_data[ZERO_SIZED_ARRAY]; |
| }; |
| |
| /** \ingroup libusb_desc |
| * A structure representing the Binary Device Object Store (BOS) descriptor. |
| * This descriptor is documented in section 9.6.2 of the USB 3.0 specification. |
| * All multiple-byte fields are represented in host-endian format. |
| */ |
| struct libusb_bos_descriptor { |
| /** Size of this descriptor (in bytes) */ |
| uint8_t bLength; |
| |
| /** Descriptor type. Will have value |
| * \ref libusb_descriptor_type::LIBUSB_DT_BOS LIBUSB_DT_BOS |
| * in this context. */ |
| uint8_t bDescriptorType; |
| |
| /** Length of this descriptor and all of its sub descriptors */ |
| uint16_t wTotalLength; |
| |
| /** The number of separate device capability descriptors in |
| * the BOS */ |
| uint8_t bNumDeviceCaps; |
| |
| /** bNumDeviceCap Device Capability Descriptors */ |
| struct libusb_bos_dev_capability_descriptor *dev_capability[ZERO_SIZED_ARRAY]; |
| }; |
| |
| /** \ingroup libusb_desc |
| * A structure representing the USB 2.0 Extension descriptor |
| * This descriptor is documented in section 9.6.2.1 of the USB 3.0 specification. |
| * All multiple-byte fields are represented in host-endian format. |
| */ |
| struct libusb_usb_2_0_extension_descriptor { |
| /** Size of this descriptor (in bytes) */ |
| uint8_t bLength; |
| |
| /** Descriptor type. Will have value |
| * \ref libusb_descriptor_type::LIBUSB_DT_DEVICE_CAPABILITY |
| * LIBUSB_DT_DEVICE_CAPABILITY in this context. */ |
| uint8_t bDescriptorType; |
| |
| /** Capability type. Will have value |
| * \ref libusb_capability_type::LIBUSB_BT_USB_2_0_EXTENSION |
| * LIBUSB_BT_USB_2_0_EXTENSION in this context. */ |
| uint8_t bDevCapabilityType; |
| |
| /** Bitmap encoding of supported device level features. |
| * A value of one in a bit location indicates a feature is |
| * supported; a value of zero indicates it is not supported. |
| * See \ref libusb_usb_2_0_extension_attributes. */ |
| uint32_t bmAttributes; |
| }; |
| |
| /** \ingroup libusb_desc |
| * A structure representing the SuperSpeed USB Device Capability descriptor |
| * This descriptor is documented in section 9.6.2.2 of the USB 3.0 specification. |
| * All multiple-byte fields are represented in host-endian format. |
| */ |
| struct libusb_ss_usb_device_capability_descriptor { |
| /** Size of this descriptor (in bytes) */ |
| uint8_t bLength; |
| |
| /** Descriptor type. Will have value |
| * \ref libusb_descriptor_type::LIBUSB_DT_DEVICE_CAPABILITY |
| * LIBUSB_DT_DEVICE_CAPABILITY in this context. */ |
| uint8_t bDescriptorType; |
| |
| /** Capability type. Will have value |
| * \ref libusb_capability_type::LIBUSB_BT_SS_USB_DEVICE_CAPABILITY |
| * LIBUSB_BT_SS_USB_DEVICE_CAPABILITY in this context. */ |
| uint8_t bDevCapabilityType; |
| |
| /** Bitmap encoding of supported device level features. |
| * A value of one in a bit location indicates a feature is |
| * supported; a value of zero indicates it is not supported. |
| * See \ref libusb_ss_usb_device_capability_attributes. */ |
| uint8_t bmAttributes; |
| |
| /** Bitmap encoding of the speed supported by this device when |
| * operating in SuperSpeed mode. See \ref libusb_supported_speed. */ |
| uint16_t wSpeedSupported; |
| |
| /** The lowest speed at which all the functionality supported |
| * by the device is available to the user. For example if the |
| * device supports all its functionality when connected at |
| * full speed and above then it sets this value to 1. */ |
| uint8_t bFunctionalitySupport; |
| |
| /** U1 Device Exit Latency. */ |
| uint8_t bU1DevExitLat; |
| |
| /** U2 Device Exit Latency. */ |
| uint16_t bU2DevExitLat; |
| }; |
| |
| /** \ingroup libusb_desc |
| * A structure representing the Container ID descriptor. |
| * This descriptor is documented in section 9.6.2.3 of the USB 3.0 specification. |
| * All multiple-byte fields, except UUIDs, are represented in host-endian format. |
| */ |
| struct libusb_container_id_descriptor { |
| /** Size of this descriptor (in bytes) */ |
| uint8_t bLength; |
| |
| /** Descriptor type. Will have value |
| * \ref libusb_descriptor_type::LIBUSB_DT_DEVICE_CAPABILITY |
| * LIBUSB_DT_DEVICE_CAPABILITY in this context. */ |
| uint8_t bDescriptorType; |
| |
| /** Capability type. Will have value |
| * \ref libusb_capability_type::LIBUSB_BT_CONTAINER_ID |
| * LIBUSB_BT_CONTAINER_ID in this context. */ |
| uint8_t bDevCapabilityType; |
| |
| /** Reserved field */ |
| uint8_t bReserved; |
| |
| /** 128 bit UUID */ |
| uint8_t ContainerID[16]; |
| }; |
| |
| /** \ingroup libusb_asyncio |
| * Setup packet for control transfers. */ |
| struct libusb_control_setup { |
| /** Request type. Bits 0:4 determine recipient, see |
| * \ref libusb_request_recipient. Bits 5:6 determine type, see |
| * \ref libusb_request_type. Bit 7 determines data transfer direction, see |
| * \ref libusb_endpoint_direction. |
| */ |
| uint8_t bmRequestType; |
| |
| /** Request. If the type bits of bmRequestType are equal to |
| * \ref libusb_request_type::LIBUSB_REQUEST_TYPE_STANDARD |
| * "LIBUSB_REQUEST_TYPE_STANDARD" then this field refers to |
| * \ref libusb_standard_request. For other cases, use of this field is |
| * application-specific. */ |
| uint8_t bRequest; |
| |
| /** Value. Varies according to request */ |
| uint16_t wValue; |
| |
| /** Index. Varies according to request, typically used to pass an index |
| * or offset */ |
| uint16_t wIndex; |
| |
| /** Number of bytes to transfer */ |
| uint16_t wLength; |
| }; |
| |
| #define LIBUSB_CONTROL_SETUP_SIZE (sizeof(struct libusb_control_setup)) |
| |
| /* libusb */ |
| |
| struct libusb_context; |
| struct libusb_device; |
| struct libusb_device_handle; |
| |
| /** \ingroup libusb_lib |
| * Structure providing the version of the libusb runtime |
| */ |
| struct libusb_version { |
| /** Library major version. */ |
| const uint16_t major; |
| |
| /** Library minor version. */ |
| const uint16_t minor; |
| |
| /** Library micro version. */ |
| const uint16_t micro; |
| |
| /** Library nano version. */ |
| const uint16_t nano; |
| |
| /** Library release candidate suffix string, e.g. "-rc4". */ |
| const char *rc; |
| |
| /** For ABI compatibility only. */ |
| const char* describe; |
| }; |
| |
| /** \ingroup libusb_lib |
| * Structure representing a libusb session. The concept of individual libusb |
| * sessions allows for your program to use two libraries (or dynamically |
| * load two modules) which both independently use libusb. This will prevent |
| * interference between the individual libusb users - for example |
| * libusb_set_option() will not affect the other user of the library, and |
| * libusb_exit() will not destroy resources that the other user is still |
| * using. |
| * |
| * Sessions are created by libusb_init() and destroyed through libusb_exit(). |
| * If your application is guaranteed to only ever include a single libusb |
| * user (i.e. you), you do not have to worry about contexts: pass NULL in |
| * every function call where a context is required. The default context |
| * will be used. |
| * |
| * For more information, see \ref libusb_contexts. |
| */ |
| typedef struct libusb_context libusb_context; |
| |
| /** \ingroup libusb_dev |
| * Structure representing a USB device detected on the system. This is an |
| * opaque type for which you are only ever provided with a pointer, usually |
| * originating from libusb_get_device_list(). |
| * |
| * Certain operations can be performed on a device, but in order to do any |
| * I/O you will have to first obtain a device handle using libusb_open(). |
| * |
| * Devices are reference counted with libusb_ref_device() and |
| * libusb_unref_device(), and are freed when the reference count reaches 0. |
| * New devices presented by libusb_get_device_list() have a reference count of |
| * 1, and libusb_free_device_list() can optionally decrease the reference count |
| * on all devices in the list. libusb_open() adds another reference which is |
| * later destroyed by libusb_close(). |
| */ |
| typedef struct libusb_device libusb_device; |
| |
| |
| /** \ingroup libusb_dev |
| * Structure representing a handle on a USB device. This is an opaque type for |
| * which you are only ever provided with a pointer, usually originating from |
| * libusb_open(). |
| * |
| * A device handle is used to perform I/O and other operations. When finished |
| * with a device handle, you should call libusb_close(). |
| */ |
| typedef struct libusb_device_handle libusb_device_handle; |
| |
| /** \ingroup libusb_dev |
| * Speed codes. Indicates the speed at which the device is operating. |
| */ |
| enum libusb_speed { |
| /** The OS doesn't report or know the device speed. */ |
| LIBUSB_SPEED_UNKNOWN = 0, |
| |
| /** The device is operating at low speed (1.5MBit/s). */ |
| LIBUSB_SPEED_LOW = 1, |
| |
| /** The device is operating at full speed (12MBit/s). */ |
| LIBUSB_SPEED_FULL = 2, |
| |
| /** The device is operating at high speed (480MBit/s). */ |
| LIBUSB_SPEED_HIGH = 3, |
| |
| /** The device is operating at super speed (5000MBit/s). */ |
| LIBUSB_SPEED_SUPER = 4, |
| |
| /** The device is operating at super speed plus (10000MBit/s). */ |
| LIBUSB_SPEED_SUPER_PLUS = 5, |
| }; |
| |
| /** \ingroup libusb_dev |
| * Supported speeds (wSpeedSupported) bitfield. Indicates what |
| * speeds the device supports. |
| */ |
| enum libusb_supported_speed { |
| /** Low speed operation supported (1.5MBit/s). */ |
| LIBUSB_LOW_SPEED_OPERATION = 1, |
| |
| /** Full speed operation supported (12MBit/s). */ |
| LIBUSB_FULL_SPEED_OPERATION = 2, |
| |
| /** High speed operation supported (480MBit/s). */ |
| LIBUSB_HIGH_SPEED_OPERATION = 4, |
| |
| /** Superspeed operation supported (5000MBit/s). */ |
| LIBUSB_SUPER_SPEED_OPERATION = 8, |
| }; |
| |
| /** \ingroup libusb_dev |
| * Masks for the bits of the |
| * \ref libusb_usb_2_0_extension_descriptor::bmAttributes "bmAttributes" field |
| * of the USB 2.0 Extension descriptor. |
| */ |
| enum libusb_usb_2_0_extension_attributes { |
| /** Supports Link Power Management (LPM) */ |
| LIBUSB_BM_LPM_SUPPORT = 2, |
| }; |
| |
| /** \ingroup libusb_dev |
| * Masks for the bits of the |
| * \ref libusb_ss_usb_device_capability_descriptor::bmAttributes "bmAttributes" field |
| * field of the SuperSpeed USB Device Capability descriptor. |
| */ |
| enum libusb_ss_usb_device_capability_attributes { |
| /** Supports Latency Tolerance Messages (LTM) */ |
| LIBUSB_BM_LTM_SUPPORT = 2, |
| }; |
| |
| /** \ingroup libusb_dev |
| * USB capability types |
| */ |
| enum libusb_bos_type { |
| /** Wireless USB device capability */ |
| LIBUSB_BT_WIRELESS_USB_DEVICE_CAPABILITY = 1, |
| |
| /** USB 2.0 extensions */ |
| LIBUSB_BT_USB_2_0_EXTENSION = 2, |
| |
| /** SuperSpeed USB device capability */ |
| LIBUSB_BT_SS_USB_DEVICE_CAPABILITY = 3, |
| |
| /** Container ID type */ |
| LIBUSB_BT_CONTAINER_ID = 4, |
| }; |
| |
| /** \ingroup libusb_misc |
| * Error codes. Most libusb functions return 0 on success or one of these |
| * codes on failure. |
| * You can call libusb_error_name() to retrieve a string representation of an |
| * error code or libusb_strerror() to get an end-user suitable description of |
| * an error code. |
| */ |
| enum libusb_error { |
| /** Success (no error) */ |
| LIBUSB_SUCCESS = 0, |
| |
| /** Input/output error */ |
| LIBUSB_ERROR_IO = -1, |
| |
| /** Invalid parameter */ |
| LIBUSB_ERROR_INVALID_PARAM = -2, |
| |
| /** Access denied (insufficient permissions) */ |
| LIBUSB_ERROR_ACCESS = -3, |
| |
| /** No such device (it may have been disconnected) */ |
| LIBUSB_ERROR_NO_DEVICE = -4, |
| |
| /** Entity not found */ |
| LIBUSB_ERROR_NOT_FOUND = -5, |
| |
| /** Resource busy */ |
| LIBUSB_ERROR_BUSY = -6, |
| |
| /** Operation timed out */ |
| LIBUSB_ERROR_TIMEOUT = -7, |
| |
| /** Overflow */ |
| LIBUSB_ERROR_OVERFLOW = -8, |
| |
| /** Pipe error */ |
| LIBUSB_ERROR_PIPE = -9, |
| |
| /** System call interrupted (perhaps due to signal) */ |
| LIBUSB_ERROR_INTERRUPTED = -10, |
| |
| /** Insufficient memory */ |
| LIBUSB_ERROR_NO_MEM = -11, |
| |
| /** Operation not supported or unimplemented on this platform */ |
| LIBUSB_ERROR_NOT_SUPPORTED = -12, |
| |
| /* NB: Remember to update LIBUSB_ERROR_COUNT below as well as the |
| message strings in strerror.c when adding new error codes here. */ |
| |
| /** Other error */ |
| LIBUSB_ERROR_OTHER = -99, |
| }; |
| |
| /* Total number of error codes in enum libusb_error */ |
| #define LIBUSB_ERROR_COUNT 14 |
| |
| /** \ingroup libusb_asyncio |
| * Transfer status codes */ |
| enum libusb_transfer_status { |
| /** Transfer completed without error. Note that this does not indicate |
| * that the entire amount of requested data was transferred. */ |
| LIBUSB_TRANSFER_COMPLETED, |
| |
| /** Transfer failed */ |
| LIBUSB_TRANSFER_ERROR, |
| |
| /** Transfer timed out */ |
| LIBUSB_TRANSFER_TIMED_OUT, |
| |
| /** Transfer was cancelled */ |
| LIBUSB_TRANSFER_CANCELLED, |
| |
| /** For bulk/interrupt endpoints: halt condition detected (endpoint |
| * stalled). For control endpoints: control request not supported. */ |
| LIBUSB_TRANSFER_STALL, |
| |
| /** Device was disconnected */ |
| LIBUSB_TRANSFER_NO_DEVICE, |
| |
| /** Device sent more data than requested */ |
| LIBUSB_TRANSFER_OVERFLOW, |
| |
| /* NB! Remember to update libusb_error_name() |
| when adding new status codes here. */ |
| }; |
| |
| /** \ingroup libusb_asyncio |
| * libusb_transfer.flags values */ |
| enum libusb_transfer_flags { |
| /** Report short frames as errors */ |
| LIBUSB_TRANSFER_SHORT_NOT_OK = 1U << 0, |
| |
| /** Automatically free() transfer buffer during libusb_free_transfer(). |
| * Note that buffers allocated with libusb_dev_mem_alloc() should not |
| * be attempted freed in this way, since free() is not an appropriate |
| * way to release such memory. */ |
| LIBUSB_TRANSFER_FREE_BUFFER = 1U << 1, |
| |
| /** Automatically call libusb_free_transfer() after callback returns. |
| * If this flag is set, it is illegal to call libusb_free_transfer() |
| * from your transfer callback, as this will result in a double-free |
| * when this flag is acted upon. */ |
| LIBUSB_TRANSFER_FREE_TRANSFER = 1U << 2, |
| |
| /** Terminate transfers that are a multiple of the endpoint's |
| * wMaxPacketSize with an extra zero length packet. This is useful |
| * when a device protocol mandates that each logical request is |
| * terminated by an incomplete packet (i.e. the logical requests are |
| * not separated by other means). |
| * |
| * This flag only affects host-to-device transfers to bulk and interrupt |
| * endpoints. In other situations, it is ignored. |
| * |
| * This flag only affects transfers with a length that is a multiple of |
| * the endpoint's wMaxPacketSize. On transfers of other lengths, this |
| * flag has no effect. Therefore, if you are working with a device that |
| * needs a ZLP whenever the end of the logical request falls on a packet |
| * boundary, then it is sensible to set this flag on <em>every</em> |
| * transfer (you do not have to worry about only setting it on transfers |
| * that end on the boundary). |
| * |
| * This flag is currently only supported on Linux. |
| * On other systems, libusb_submit_transfer() will return |
| * LIBUSB_ERROR_NOT_SUPPORTED for every transfer where this flag is set. |
| * |
| * Available since libusb-1.0.9. |
| */ |
| LIBUSB_TRANSFER_ADD_ZERO_PACKET = 1U << 3, |
| }; |
| |
| /** \ingroup libusb_asyncio |
| * Isochronous packet descriptor. */ |
| struct libusb_iso_packet_descriptor { |
| /** Length of data to request in this packet */ |
| unsigned int length; |
| |
| /** Amount of data that was actually transferred */ |
| unsigned int actual_length; |
| |
| /** Status code for this packet */ |
| enum libusb_transfer_status status; |
| }; |
| |
| struct libusb_transfer; |
| |
| /** \ingroup libusb_asyncio |
| * Asynchronous transfer callback function type. When submitting asynchronous |
| * transfers, you pass a pointer to a callback function of this type via the |
| * \ref libusb_transfer::callback "callback" member of the libusb_transfer |
| * structure. libusb will call this function later, when the transfer has |
| * completed or failed. See \ref libusb_asyncio for more information. |
| * \param transfer The libusb_transfer struct the callback function is being |
| * notified about. |
| */ |
| typedef void (LIBUSB_CALL *libusb_transfer_cb_fn)(struct libusb_transfer *transfer); |
| |
| /** \ingroup libusb_asyncio |
| * The generic USB transfer structure. The user populates this structure and |
| * then submits it in order to request a transfer. After the transfer has |
| * completed, the library populates the transfer with the results and passes |
| * it back to the user. |
| */ |
| struct libusb_transfer { |
| /** Handle of the device that this transfer will be submitted to */ |
| libusb_device_handle *dev_handle; |
| |
| /** A bitwise OR combination of \ref libusb_transfer_flags. */ |
| uint8_t flags; |
| |
| /** Address of the endpoint where this transfer will be sent. */ |
| unsigned char endpoint; |
| |
| /** Type of the endpoint from \ref libusb_transfer_type */ |
| unsigned char type; |
| |
| /** Timeout for this transfer in milliseconds. A value of 0 indicates no |
| * timeout. */ |
| unsigned int timeout; |
| |
| /** The status of the transfer. Read-only, and only for use within |
| * transfer callback function. |
| * |
| * If this is an isochronous transfer, this field may read COMPLETED even |
| * if there were errors in the frames. Use the |
| * \ref libusb_iso_packet_descriptor::status "status" field in each packet |
| * to determine if errors occurred. */ |
| enum libusb_transfer_status status; |
| |
| /** Length of the data buffer. Must be non-negative. */ |
| int length; |
| |
| /** Actual length of data that was transferred. Read-only, and only for |
| * use within transfer callback function. Not valid for isochronous |
| * endpoint transfers. */ |
| int actual_length; |
| |
| /** Callback function. This will be invoked when the transfer completes, |
| * fails, or is cancelled. */ |
| libusb_transfer_cb_fn callback; |
| |
| /** User context data to pass to the callback function. */ |
| void *user_data; |
| |
| /** Data buffer */ |
| unsigned char *buffer; |
| |
| /** Number of isochronous packets. Only used for I/O with isochronous |
| * endpoints. Must be non-negative. */ |
| int num_iso_packets; |
| |
| /** Isochronous packet descriptors, for isochronous transfers only. */ |
| struct libusb_iso_packet_descriptor iso_packet_desc[ZERO_SIZED_ARRAY]; |
| }; |
| |
| /** \ingroup libusb_misc |
| * Capabilities supported by an instance of libusb on the current running |
| * platform. Test if the loaded library supports a given capability by calling |
| * \ref libusb_has_capability(). |
| */ |
| enum libusb_capability { |
| /** The libusb_has_capability() API is available. */ |
| LIBUSB_CAP_HAS_CAPABILITY = 0x0000, |
| /** Hotplug support is available on this platform. */ |
| LIBUSB_CAP_HAS_HOTPLUG = 0x0001, |
| /** The library can access HID devices without requiring user intervention. |
| * Note that before being able to actually access an HID device, you may |
| * still have to call additional libusb functions such as |
| * \ref libusb_detach_kernel_driver(). */ |
| LIBUSB_CAP_HAS_HID_ACCESS = 0x0100, |
| /** The library supports detaching of the default USB driver, using |
| * \ref libusb_detach_kernel_driver(), if one is set by the OS kernel */ |
| LIBUSB_CAP_SUPPORTS_DETACH_KERNEL_DRIVER = 0x0101 |
| }; |
| |
| /** \ingroup libusb_lib |
| * Log message levels. |
| * - LIBUSB_LOG_LEVEL_NONE (0) : no messages ever printed by the library (default) |
| * - LIBUSB_LOG_LEVEL_ERROR (1) : error messages are printed to stderr |
| * - LIBUSB_LOG_LEVEL_WARNING (2) : warning and error messages are printed to stderr |
| * - LIBUSB_LOG_LEVEL_INFO (3) : informational messages are printed to stderr |
| * - LIBUSB_LOG_LEVEL_DEBUG (4) : debug and informational messages are printed to stderr |
| */ |
| enum libusb_log_level { |
| LIBUSB_LOG_LEVEL_NONE = 0, |
| LIBUSB_LOG_LEVEL_ERROR = 1, |
| LIBUSB_LOG_LEVEL_WARNING = 2, |
| LIBUSB_LOG_LEVEL_INFO = 3, |
| LIBUSB_LOG_LEVEL_DEBUG = 4, |
| }; |
| |
| /** \ingroup libusb_lib |
| * Log callback mode. |
| * \see libusb_set_log_cb() |
| */ |
| enum libusb_log_cb_mode { |
| |
| /** Callback function handling all log mesages. */ |
| LIBUSB_LOG_CB_GLOBAL = 1 << 0, |
| |
| /** Callback function handling context related log mesages. */ |
| LIBUSB_LOG_CB_CONTEXT = 1 << 1 |
| }; |
| |
| /** \ingroup libusb_lib |
| * Callback function for handling log messages. |
| * \param ctx the context which is related to the log message, or NULL if it |
| * is a global log message |
| * \param level the log level, see \ref libusb_log_level for a description |
| * \param str the log message |
| * \see libusb_set_log_cb() |
| */ |
| typedef void (LIBUSB_CALL *libusb_log_cb)(libusb_context *ctx, |
| enum libusb_log_level level, const char *str); |
| |
| int LIBUSB_CALL libusb_init(libusb_context **ctx); |
| void LIBUSB_CALL libusb_exit(libusb_context *ctx); |
| LIBUSB_DEPRECATED_FOR(libusb_set_option) |
| void LIBUSB_CALL libusb_set_debug(libusb_context *ctx, int level); |
| void LIBUSB_CALL libusb_set_log_cb(libusb_context *ctx, libusb_log_cb cb, int mode); |
| const struct libusb_version * LIBUSB_CALL libusb_get_version(void); |
| int LIBUSB_CALL libusb_has_capability(uint32_t capability); |
| const char * LIBUSB_CALL libusb_error_name(int errcode); |
| int LIBUSB_CALL libusb_setlocale(const char *locale); |
| const char * LIBUSB_CALL libusb_strerror(enum libusb_error errcode); |
| |
| ssize_t LIBUSB_CALL libusb_get_device_list(libusb_context *ctx, |
| libusb_device ***list); |
| void LIBUSB_CALL libusb_free_device_list(libusb_device **list, |
| int unref_devices); |
| libusb_device * LIBUSB_CALL libusb_ref_device(libusb_device *dev); |
| void LIBUSB_CALL libusb_unref_device(libusb_device *dev); |
| |
| int LIBUSB_CALL libusb_get_configuration(libusb_device_handle *dev, |
| int *config); |
| int LIBUSB_CALL libusb_get_device_descriptor(libusb_device *dev, |
| struct libusb_device_descriptor *desc); |
| int LIBUSB_CALL libusb_get_active_config_descriptor(libusb_device *dev, |
| struct libusb_config_descriptor **config); |
| int LIBUSB_CALL libusb_get_config_descriptor(libusb_device *dev, |
| uint8_t config_index, struct libusb_config_descriptor **config); |
| int LIBUSB_CALL libusb_get_config_descriptor_by_value(libusb_device *dev, |
| uint8_t bConfigurationValue, struct libusb_config_descriptor **config); |
| void LIBUSB_CALL libusb_free_config_descriptor( |
| struct libusb_config_descriptor *config); |
| int LIBUSB_CALL libusb_get_ss_endpoint_companion_descriptor( |
| struct libusb_context *ctx, |
| const struct libusb_endpoint_descriptor *endpoint, |
| struct libusb_ss_endpoint_companion_descriptor **ep_comp); |
| void LIBUSB_CALL libusb_free_ss_endpoint_companion_descriptor( |
| struct libusb_ss_endpoint_companion_descriptor *ep_comp); |
| int LIBUSB_CALL libusb_get_bos_descriptor(libusb_device_handle *dev_handle, |
| struct libusb_bos_descriptor **bos); |
| void LIBUSB_CALL libusb_free_bos_descriptor(struct libusb_bos_descriptor *bos); |
| int LIBUSB_CALL libusb_get_usb_2_0_extension_descriptor( |
| struct libusb_context *ctx, |
| struct libusb_bos_dev_capability_descriptor *dev_cap, |
| struct libusb_usb_2_0_extension_descriptor **usb_2_0_extension); |
| void LIBUSB_CALL libusb_free_usb_2_0_extension_descriptor( |
| struct libusb_usb_2_0_extension_descriptor *usb_2_0_extension); |
| int LIBUSB_CALL libusb_get_ss_usb_device_capability_descriptor( |
| struct libusb_context *ctx, |
| struct libusb_bos_dev_capability_descriptor *dev_cap, |
| struct libusb_ss_usb_device_capability_descriptor **ss_usb_device_cap); |
| void LIBUSB_CALL libusb_free_ss_usb_device_capability_descriptor( |
| struct libusb_ss_usb_device_capability_descriptor *ss_usb_device_cap); |
| int LIBUSB_CALL libusb_get_container_id_descriptor(struct libusb_context *ctx, |
| struct libusb_bos_dev_capability_descriptor *dev_cap, |
| struct libusb_container_id_descriptor **container_id); |
| void LIBUSB_CALL libusb_free_container_id_descriptor( |
| struct libusb_container_id_descriptor *container_id); |
| uint8_t LIBUSB_CALL libusb_get_bus_number(libusb_device *dev); |
| uint8_t LIBUSB_CALL libusb_get_port_number(libusb_device *dev); |
| int LIBUSB_CALL libusb_get_port_numbers(libusb_device *dev, uint8_t* port_numbers, int port_numbers_len); |
| LIBUSB_DEPRECATED_FOR(libusb_get_port_numbers) |
| int LIBUSB_CALL libusb_get_port_path(libusb_context *ctx, libusb_device *dev, uint8_t* path, uint8_t path_length); |
| libusb_device * LIBUSB_CALL libusb_get_parent(libusb_device *dev); |
| uint8_t LIBUSB_CALL libusb_get_device_address(libusb_device *dev); |
| int LIBUSB_CALL libusb_get_device_speed(libusb_device *dev); |
| int LIBUSB_CALL libusb_get_max_packet_size(libusb_device *dev, |
| unsigned char endpoint); |
| int LIBUSB_CALL libusb_get_max_iso_packet_size(libusb_device *dev, |
| unsigned char endpoint); |
| |
| int LIBUSB_CALL libusb_wrap_sys_device(libusb_context *ctx, intptr_t sys_dev, libusb_device_handle **dev_handle); |
| int LIBUSB_CALL libusb_open(libusb_device *dev, libusb_device_handle **dev_handle); |
| void LIBUSB_CALL libusb_close(libusb_device_handle *dev_handle); |
| libusb_device * LIBUSB_CALL libusb_get_device(libusb_device_handle *dev_handle); |
| |
| int LIBUSB_CALL libusb_set_configuration(libusb_device_handle *dev_handle, |
| int configuration); |
| int LIBUSB_CALL libusb_claim_interface(libusb_device_handle *dev_handle, |
| int interface_number); |
| int LIBUSB_CALL libusb_release_interface(libusb_device_handle *dev_handle, |
| int interface_number); |
| |
| libusb_device_handle * LIBUSB_CALL libusb_open_device_with_vid_pid( |
| libusb_context *ctx, uint16_t vendor_id, uint16_t product_id); |
| |
| int LIBUSB_CALL libusb_set_interface_alt_setting(libusb_device_handle *dev_handle, |
| int interface_number, int alternate_setting); |
| int LIBUSB_CALL libusb_clear_halt(libusb_device_handle *dev_handle, |
| unsigned char endpoint); |
| int LIBUSB_CALL libusb_reset_device(libusb_device_handle *dev_handle); |
| |
| int LIBUSB_CALL libusb_alloc_streams(libusb_device_handle *dev_handle, |
| uint32_t num_streams, unsigned char *endpoints, int num_endpoints); |
| int LIBUSB_CALL libusb_free_streams(libusb_device_handle *dev_handle, |
| unsigned char *endpoints, int num_endpoints); |
| |
| unsigned char * LIBUSB_CALL libusb_dev_mem_alloc(libusb_device_handle *dev_handle, |
| size_t length); |
| int LIBUSB_CALL libusb_dev_mem_free(libusb_device_handle *dev_handle, |
| unsigned char *buffer, size_t length); |
| |
| int LIBUSB_CALL libusb_kernel_driver_active(libusb_device_handle *dev_handle, |
| int interface_number); |
| int LIBUSB_CALL libusb_detach_kernel_driver(libusb_device_handle *dev_handle, |
| int interface_number); |
| int LIBUSB_CALL libusb_attach_kernel_driver(libusb_device_handle *dev_handle, |
| int interface_number); |
| int LIBUSB_CALL libusb_set_auto_detach_kernel_driver( |
| libusb_device_handle *dev_handle, int enable); |
| |
| /* async I/O */ |
| |
| /** \ingroup libusb_asyncio |
| * Get the data section of a control transfer. This convenience function is here |
| * to remind you that the data does not start until 8 bytes into the actual |
| * buffer, as the setup packet comes first. |
| * |
| * Calling this function only makes sense from a transfer callback function, |
| * or situations where you have already allocated a suitably sized buffer at |
| * transfer->buffer. |
| * |
| * \param transfer a transfer |
| * \returns pointer to the first byte of the data section |
| */ |
| static inline unsigned char *libusb_control_transfer_get_data( |
| struct libusb_transfer *transfer) |
| { |
| return transfer->buffer + LIBUSB_CONTROL_SETUP_SIZE; |
| } |
| |
| /** \ingroup libusb_asyncio |
| * Get the control setup packet of a control transfer. This convenience |
| * function is here to remind you that the control setup occupies the first |
| * 8 bytes of the transfer data buffer. |
| * |
| * Calling this function only makes sense from a transfer callback function, |
| * or situations where you have already allocated a suitably sized buffer at |
| * transfer->buffer. |
| * |
| * \param transfer a transfer |
| * \returns a casted pointer to the start of the transfer data buffer |
| */ |
| static inline struct libusb_control_setup *libusb_control_transfer_get_setup( |
| struct libusb_transfer *transfer) |
| { |
| return (struct libusb_control_setup *)(void *) transfer->buffer; |
| } |
| |
| /** \ingroup libusb_asyncio |
| * Helper function to populate the setup packet (first 8 bytes of the data |
| * buffer) for a control transfer. The wIndex, wValue and wLength values should |
| * be given in host-endian byte order. |
| * |
| * \param buffer buffer to output the setup packet into |
| * This pointer must be aligned to at least 2 bytes boundary. |
| * \param bmRequestType see the |
| * \ref libusb_control_setup::bmRequestType "bmRequestType" field of |
| * \ref libusb_control_setup |
| * \param bRequest see the |
| * \ref libusb_control_setup::bRequest "bRequest" field of |
| * \ref libusb_control_setup |
| * \param wValue see the |
| * \ref libusb_control_setup::wValue "wValue" field of |
| * \ref libusb_control_setup |
| * \param wIndex see the |
| * \ref libusb_control_setup::wIndex "wIndex" field of |
| * \ref libusb_control_setup |
| * \param wLength see the |
| * \ref libusb_control_setup::wLength "wLength" field of |
| * \ref libusb_control_setup |
| */ |
| static inline void libusb_fill_control_setup(unsigned char *buffer, |
| uint8_t bmRequestType, uint8_t bRequest, uint16_t wValue, uint16_t wIndex, |
| uint16_t wLength) |
| { |
| struct libusb_control_setup *setup = (struct libusb_control_setup *)(void *) buffer; |
| setup->bmRequestType = bmRequestType; |
| setup->bRequest = bRequest; |
| setup->wValue = libusb_cpu_to_le16(wValue); |
| setup->wIndex = libusb_cpu_to_le16(wIndex); |
| setup->wLength = libusb_cpu_to_le16(wLength); |
| } |
| |
| struct libusb_transfer * LIBUSB_CALL libusb_alloc_transfer(int iso_packets); |
| int LIBUSB_CALL libusb_submit_transfer(struct libusb_transfer *transfer); |
| int LIBUSB_CALL libusb_cancel_transfer(struct libusb_transfer *transfer); |
| void LIBUSB_CALL libusb_free_transfer(struct libusb_transfer *transfer); |
| void LIBUSB_CALL libusb_transfer_set_stream_id( |
| struct libusb_transfer *transfer, uint32_t stream_id); |
| uint32_t LIBUSB_CALL libusb_transfer_get_stream_id( |
| struct libusb_transfer *transfer); |
| |
| /** \ingroup libusb_asyncio |
| * Helper function to populate the required \ref libusb_transfer fields |
| * for a control transfer. |
| * |
| * If you pass a transfer buffer to this function, the first 8 bytes will |
| * be interpreted as a control setup packet, and the wLength field will be |
| * used to automatically populate the \ref libusb_transfer::length "length" |
| * field of the transfer. Therefore the recommended approach is: |
| * -# Allocate a suitably sized data buffer (including space for control setup) |
| * -# Call libusb_fill_control_setup() |
| * -# If this is a host-to-device transfer with a data stage, put the data |
| * in place after the setup packet |
| * -# Call this function |
| * -# Call libusb_submit_transfer() |
| * |
| * It is also legal to pass a NULL buffer to this function, in which case this |
| * function will not attempt to populate the length field. Remember that you |
| * must then populate the buffer and length fields later. |
| * |
| * \param transfer the transfer to populate |
| * \param dev_handle handle of the device that will handle the transfer |
| * \param buffer data buffer. If provided, this function will interpret the |
| * first 8 bytes as a setup packet and infer the transfer length from that. |
| * This pointer must be aligned to at least 2 bytes boundary. |
| * \param callback callback function to be invoked on transfer completion |
| * \param user_data user data to pass to callback function |
| * \param timeout timeout for the transfer in milliseconds |
| */ |
| static inline void libusb_fill_control_transfer( |
| struct libusb_transfer *transfer, libusb_device_handle *dev_handle, |
| unsigned char *buffer, libusb_transfer_cb_fn callback, void *user_data, |
| unsigned int timeout) |
| { |
| struct libusb_control_setup *setup = (struct libusb_control_setup *)(void *) buffer; |
| transfer->dev_handle = dev_handle; |
| transfer->endpoint = 0; |
| transfer->type = LIBUSB_TRANSFER_TYPE_CONTROL; |
| transfer->timeout = timeout; |
| transfer->buffer = buffer; |
| if (setup) |
| transfer->length = (int) (LIBUSB_CONTROL_SETUP_SIZE |
| + libusb_le16_to_cpu(setup->wLength)); |
| transfer->user_data = user_data; |
| transfer->callback = callback; |
| } |
| |
| /** \ingroup libusb_asyncio |
| * Helper function to populate the required \ref libusb_transfer fields |
| * for a bulk transfer. |
| * |
| * \param transfer the transfer to populate |
| * \param dev_handle handle of the device that will handle the transfer |
| * \param endpoint address of the endpoint where this transfer will be sent |
| * \param buffer data buffer |
| * \param length length of data buffer |
| * \param callback callback function to be invoked on transfer completion |
| * \param user_data user data to pass to callback function |
| * \param timeout timeout for the transfer in milliseconds |
| */ |
| static inline void libusb_fill_bulk_transfer(struct libusb_transfer *transfer, |
| libusb_device_handle *dev_handle, unsigned char endpoint, |
| unsigned char *buffer, int length, libusb_transfer_cb_fn callback, |
| void *user_data, unsigned int timeout) |
| { |
| transfer->dev_handle = dev_handle; |
| transfer->endpoint = endpoint; |
| transfer->type = LIBUSB_TRANSFER_TYPE_BULK; |
| transfer->timeout = timeout; |
| transfer->buffer = buffer; |
| transfer->length = length; |
| transfer->user_data = user_data; |
| transfer->callback = callback; |
| } |
| |
| /** \ingroup libusb_asyncio |
| * Helper function to populate the required \ref libusb_transfer fields |
| * for a bulk transfer using bulk streams. |
| * |
| * Since version 1.0.19, \ref LIBUSB_API_VERSION >= 0x01000103 |
| * |
| * \param transfer the transfer to populate |
| * \param dev_handle handle of the device that will handle the transfer |
| * \param endpoint address of the endpoint where this transfer will be sent |
| * \param stream_id bulk stream id for this transfer |
| * \param buffer data buffer |
| * \param length length of data buffer |
| * \param callback callback function to be invoked on transfer completion |
| * \param user_data user data to pass to callback function |
| * \param timeout timeout for the transfer in milliseconds |
| */ |
| static inline void libusb_fill_bulk_stream_transfer( |
| struct libusb_transfer *transfer, libusb_device_handle *dev_handle, |
| unsigned char endpoint, uint32_t stream_id, |
| unsigned char *buffer, int length, libusb_transfer_cb_fn callback, |
| void *user_data, unsigned int timeout) |
| { |
| libusb_fill_bulk_transfer(transfer, dev_handle, endpoint, buffer, |
| length, callback, user_data, timeout); |
| transfer->type = LIBUSB_TRANSFER_TYPE_BULK_STREAM; |
| libusb_transfer_set_stream_id(transfer, stream_id); |
| } |
| |
| /** \ingroup libusb_asyncio |
| * Helper function to populate the required \ref libusb_transfer fields |
| * for an interrupt transfer. |
| * |
| * \param transfer the transfer to populate |
| * \param dev_handle handle of the device that will handle the transfer |
| * \param endpoint address of the endpoint where this transfer will be sent |
| * \param buffer data buffer |
| * \param length length of data buffer |
| * \param callback callback function to be invoked on transfer completion |
| * \param user_data user data to pass to callback function |
| * \param timeout timeout for the transfer in milliseconds |
| */ |
| static inline void libusb_fill_interrupt_transfer( |
| struct libusb_transfer *transfer, libusb_device_handle *dev_handle, |
| unsigned char endpoint, unsigned char *buffer, int length, |
| libusb_transfer_cb_fn callback, void *user_data, unsigned int timeout) |
| { |
| transfer->dev_handle = dev_handle; |
| transfer->endpoint = endpoint; |
| transfer->type = LIBUSB_TRANSFER_TYPE_INTERRUPT; |
| transfer->timeout = timeout; |
| transfer->buffer = buffer; |
| transfer->length = length; |
| transfer->user_data = user_data; |
| transfer->callback = callback; |
| } |
| |
| /** \ingroup libusb_asyncio |
| * Helper function to populate the required \ref libusb_transfer fields |
| * for an isochronous transfer. |
| * |
| * \param transfer the transfer to populate |
| * \param dev_handle handle of the device that will handle the transfer |
| * \param endpoint address of the endpoint where this transfer will be sent |
| * \param buffer data buffer |
| * \param length length of data buffer |
| * \param num_iso_packets the number of isochronous packets |
| * \param callback callback function to be invoked on transfer completion |
| * \param user_data user data to pass to callback function |
| * \param timeout timeout for the transfer in milliseconds |
| */ |
| static inline void libusb_fill_iso_transfer(struct libusb_transfer *transfer, |
| libusb_device_handle *dev_handle, unsigned char endpoint, |
| unsigned char *buffer, int length, int num_iso_packets, |
| libusb_transfer_cb_fn callback, void *user_data, unsigned int timeout) |
| { |
| transfer->dev_handle = dev_handle; |
| transfer->endpoint = endpoint; |
| transfer->type = LIBUSB_TRANSFER_TYPE_ISOCHRONOUS; |
| transfer->timeout = timeout; |
| transfer->buffer = buffer; |
| transfer->length = length; |
| transfer->num_iso_packets = num_iso_packets; |
| transfer->user_data = user_data; |
| transfer->callback = callback; |
| } |
| |
| /** \ingroup libusb_asyncio |
| * Convenience function to set the length of all packets in an isochronous |
| * transfer, based on the num_iso_packets field in the transfer structure. |
| * |
| * \param transfer a transfer |
| * \param length the length to set in each isochronous packet descriptor |
| * \see libusb_get_max_packet_size() |
| */ |
| static inline void libusb_set_iso_packet_lengths( |
| struct libusb_transfer *transfer, unsigned int length) |
| { |
| int i; |
| for (i = 0; i < transfer->num_iso_packets; i++) |
| transfer->iso_packet_desc[i].length = length; |
| } |
| |
| /** \ingroup libusb_asyncio |
| * Convenience function to locate the position of an isochronous packet |
| * within the buffer of an isochronous transfer. |
| * |
| * This is a thorough function which loops through all preceding packets, |
| * accumulating their lengths to find the position of the specified packet. |
| * Typically you will assign equal lengths to each packet in the transfer, |
| * and hence the above method is sub-optimal. You may wish to use |
| * libusb_get_iso_packet_buffer_simple() instead. |
| * |
| * \param transfer a transfer |
| * \param packet the packet to return the address of |
| * \returns the base address of the packet buffer inside the transfer buffer, |
| * or NULL if the packet does not exist. |
| * \see libusb_get_iso_packet_buffer_simple() |
| */ |
| static inline unsigned char *libusb_get_iso_packet_buffer( |
| struct libusb_transfer *transfer, unsigned int packet) |
| { |
| int i; |
| size_t offset = 0; |
| int _packet; |
| |
| /* oops..slight bug in the API. packet is an unsigned int, but we use |
| * signed integers almost everywhere else. range-check and convert to |
| * signed to avoid compiler warnings. FIXME for libusb-2. */ |
| if (packet > INT_MAX) |
| return NULL; |
| _packet = (int) packet; |
| |
| if (_packet >= transfer->num_iso_packets) |
| return NULL; |
| |
| for (i = 0; i < _packet; i++) |
| offset += transfer->iso_packet_desc[i].length; |
| |
| return transfer->buffer + offset; |
| } |
| |
| /** \ingroup libusb_asyncio |
| * Convenience function to locate the position of an isochronous packet |
| * within the buffer of an isochronous transfer, for transfers where each |
| * packet is of identical size. |
| * |
| * This function relies on the assumption that every packet within the transfer |
| * is of identical size to the first packet. Calculating the location of |
| * the packet buffer is then just a simple calculation: |
| * <tt>buffer + (packet_size * packet)</tt> |
| * |
| * Do not use this function on transfers other than those that have identical |
| * packet lengths for each packet. |
| * |
| * \param transfer a transfer |
| * \param packet the packet to return the address of |
| * \returns the base address of the packet buffer inside the transfer buffer, |
| * or NULL if the packet does not exist. |
| * \see libusb_get_iso_packet_buffer() |
| */ |
| static inline unsigned char *libusb_get_iso_packet_buffer_simple( |
| struct libusb_transfer *transfer, unsigned int packet) |
| { |
| int _packet; |
| |
| /* oops..slight bug in the API. packet is an unsigned int, but we use |
| * signed integers almost everywhere else. range-check and convert to |
| * signed to avoid compiler warnings. FIXME for libusb-2. */ |
| if (packet > INT_MAX) |
| return NULL; |
| _packet = (int) packet; |
| |
| if (_packet >= transfer->num_iso_packets) |
| return NULL; |
| |
| return transfer->buffer + ((int) transfer->iso_packet_desc[0].length * _packet); |
| } |
| |
| /* sync I/O */ |
| |
| int LIBUSB_CALL libusb_control_transfer(libusb_device_handle *dev_handle, |
| uint8_t request_type, uint8_t bRequest, uint16_t wValue, uint16_t wIndex, |
| unsigned char *data, uint16_t wLength, unsigned int timeout); |
| |
| int LIBUSB_CALL libusb_bulk_transfer(libusb_device_handle *dev_handle, |
| unsigned char endpoint, unsigned char *data, int length, |
| int *actual_length, unsigned int timeout); |
| |
| int LIBUSB_CALL libusb_interrupt_transfer(libusb_device_handle *dev_handle, |
| unsigned char endpoint, unsigned char *data, int length, |
| int *actual_length, unsigned int timeout); |
| |
| /** \ingroup libusb_desc |
| * Retrieve a descriptor from the default control pipe. |
| * This is a convenience function which formulates the appropriate control |
| * message to retrieve the descriptor. |
| * |
| * \param dev_handle a device handle |
| * \param desc_type the descriptor type, see \ref libusb_descriptor_type |
| * \param desc_index the index of the descriptor to retrieve |
| * \param data output buffer for descriptor |
| * \param length size of data buffer |
| * \returns number of bytes returned in data, or LIBUSB_ERROR code on failure |
| */ |
| static inline int libusb_get_descriptor(libusb_device_handle *dev_handle, |
| uint8_t desc_type, uint8_t desc_index, unsigned char *data, int length) |
| { |
| return libusb_control_transfer(dev_handle, LIBUSB_ENDPOINT_IN, |
| LIBUSB_REQUEST_GET_DESCRIPTOR, (uint16_t) ((desc_type << 8) | desc_index), |
| 0, data, (uint16_t) length, 1000); |
| } |
| |
| /** \ingroup libusb_desc |
| * Retrieve a descriptor from a device. |
| * This is a convenience function which formulates the appropriate control |
| * message to retrieve the descriptor. The string returned is Unicode, as |
| * detailed in the USB specifications. |
| * |
| * \param dev_handle a device handle |
| * \param desc_index the index of the descriptor to retrieve |
| * \param langid the language ID for the string descriptor |
| * \param data output buffer for descriptor |
| * \param length size of data buffer |
| * \returns number of bytes returned in data, or LIBUSB_ERROR code on failure |
| * \see libusb_get_string_descriptor_ascii() |
| */ |
| static inline int libusb_get_string_descriptor(libusb_device_handle *dev_handle, |
| uint8_t desc_index, uint16_t langid, unsigned char *data, int length) |
| { |
| return libusb_control_transfer(dev_handle, LIBUSB_ENDPOINT_IN, |
| LIBUSB_REQUEST_GET_DESCRIPTOR, (uint16_t)((LIBUSB_DT_STRING << 8) | desc_index), |
| langid, data, (uint16_t) length, 1000); |
| } |
| |
| int LIBUSB_CALL libusb_get_string_descriptor_ascii(libusb_device_handle *dev_handle, |
| uint8_t desc_index, unsigned char *data, int length); |
| |
| /* polling and timeouts */ |
| |
| int LIBUSB_CALL libusb_try_lock_events(libusb_context *ctx); |
| void LIBUSB_CALL libusb_lock_events(libusb_context *ctx); |
| void LIBUSB_CALL libusb_unlock_events(libusb_context *ctx); |
| int LIBUSB_CALL libusb_event_handling_ok(libusb_context *ctx); |
| int LIBUSB_CALL libusb_event_handler_active(libusb_context *ctx); |
| void LIBUSB_CALL libusb_interrupt_event_handler(libusb_context *ctx); |
| void LIBUSB_CALL libusb_lock_event_waiters(libusb_context *ctx); |
| void LIBUSB_CALL libusb_unlock_event_waiters(libusb_context *ctx); |
| int LIBUSB_CALL libusb_wait_for_event(libusb_context *ctx, struct timeval *tv); |
| |
| int LIBUSB_CALL libusb_handle_events_timeout(libusb_context *ctx, |
| struct timeval *tv); |
| int LIBUSB_CALL libusb_handle_events_timeout_completed(libusb_context *ctx, |
| struct timeval *tv, int *completed); |
| int LIBUSB_CALL libusb_handle_events(libusb_context *ctx); |
| int LIBUSB_CALL libusb_handle_events_completed(libusb_context *ctx, int *completed); |
| int LIBUSB_CALL libusb_handle_events_locked(libusb_context *ctx, |
| struct timeval *tv); |
| int LIBUSB_CALL libusb_pollfds_handle_timeouts(libusb_context *ctx); |
| int LIBUSB_CALL libusb_get_next_timeout(libusb_context *ctx, |
| struct timeval *tv); |
| |
| /** \ingroup libusb_poll |
| * File descriptor for polling |
| */ |
| struct libusb_pollfd { |
| /** Numeric file descriptor */ |
| int fd; |
| |
| /** Event flags to poll for from <poll.h>. POLLIN indicates that you |
| * should monitor this file descriptor for becoming ready to read from, |
| * and POLLOUT indicates that you should monitor this file descriptor for |
| * nonblocking write readiness. */ |
| short events; |
| }; |
| |
| /** \ingroup libusb_poll |
| * Callback function, invoked when a new file descriptor should be added |
| * to the set of file descriptors monitored for events. |
| * \param fd the new file descriptor |
| * \param events events to monitor for, see \ref libusb_pollfd for a |
| * description |
| * \param user_data User data pointer specified in |
| * libusb_set_pollfd_notifiers() call |
| * \see libusb_set_pollfd_notifiers() |
| */ |
| typedef void (LIBUSB_CALL *libusb_pollfd_added_cb)(int fd, short events, |
| void *user_data); |
| |
| /** \ingroup libusb_poll |
| * Callback function, invoked when a file descriptor should be removed from |
| * the set of file descriptors being monitored for events. After returning |
| * from this callback, do not use that file descriptor again. |
| * \param fd the file descriptor to stop monitoring |
| * \param user_data User data pointer specified in |
| * libusb_set_pollfd_notifiers() call |
| * \see libusb_set_pollfd_notifiers() |
| */ |
| typedef void (LIBUSB_CALL *libusb_pollfd_removed_cb)(int fd, void *user_data); |
| |
| const struct libusb_pollfd ** LIBUSB_CALL libusb_get_pollfds( |
| libusb_context *ctx); |
| void LIBUSB_CALL libusb_free_pollfds(const struct libusb_pollfd **pollfds); |
| void LIBUSB_CALL libusb_set_pollfd_notifiers(libusb_context *ctx, |
| libusb_pollfd_added_cb added_cb, libusb_pollfd_removed_cb removed_cb, |
| void *user_data); |
| |
| /** \ingroup libusb_hotplug |
| * Callback handle. |
| * |
| * Callbacks handles are generated by libusb_hotplug_register_callback() |
| * and can be used to deregister callbacks. Callback handles are unique |
| * per libusb_context and it is safe to call libusb_hotplug_deregister_callback() |
| * on an already deregisted callback. |
| * |
| * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102 |
| * |
| * For more information, see \ref libusb_hotplug. |
| */ |
| typedef int libusb_hotplug_callback_handle; |
| |
| /** \ingroup libusb_hotplug |
| * |
| * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102 |
| * |
| * Flags for hotplug events */ |
| typedef enum { |
| /** Default value when not using any flags. */ |
| LIBUSB_HOTPLUG_NO_FLAGS = 0U, |
| |
| /** Arm the callback and fire it for all matching currently attached devices. */ |
| LIBUSB_HOTPLUG_ENUMERATE = 1U << 0, |
| } libusb_hotplug_flag; |
| |
| /** \ingroup libusb_hotplug |
| * |
| * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102 |
| * |
| * Hotplug events */ |
| typedef enum { |
| /** A device has been plugged in and is ready to use */ |
| LIBUSB_HOTPLUG_EVENT_DEVICE_ARRIVED = 0x01U, |
| |
| /** A device has left and is no longer available. |
| * It is the user's responsibility to call libusb_close on any handle associated with a disconnected device. |
| * It is safe to call libusb_get_device_descriptor on a device that has left */ |
| LIBUSB_HOTPLUG_EVENT_DEVICE_LEFT = 0x02U, |
| } libusb_hotplug_event; |
| |
| /** \ingroup libusb_hotplug |
| * Wildcard matching for hotplug events */ |
| #define LIBUSB_HOTPLUG_MATCH_ANY -1 |
| |
| /** \ingroup libusb_hotplug |
| * Hotplug callback function type. When requesting hotplug event notifications, |
| * you pass a pointer to a callback function of this type. |
| * |
| * This callback may be called by an internal event thread and as such it is |
| * recommended the callback do minimal processing before returning. |
| * |
| * libusb will call this function later, when a matching event had happened on |
| * a matching device. See \ref libusb_hotplug for more information. |
| * |
| * It is safe to call either libusb_hotplug_register_callback() or |
| * libusb_hotplug_deregister_callback() from within a callback function. |
| * |
| * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102 |
| * |
| * \param ctx context of this notification |
| * \param device libusb_device this event occurred on |
| * \param event event that occurred |
| * \param user_data user data provided when this callback was registered |
| * \returns bool whether this callback is finished processing events. |
| * returning 1 will cause this callback to be deregistered |
| */ |
| typedef int (LIBUSB_CALL *libusb_hotplug_callback_fn)(libusb_context *ctx, |
| libusb_device *device, |
| libusb_hotplug_event event, |
| void *user_data); |
| |
| /** \ingroup libusb_hotplug |
| * Register a hotplug callback function |
| * |
| * Register a callback with the libusb_context. The callback will fire |
| * when a matching event occurs on a matching device. The callback is |
| * armed until either it is deregistered with libusb_hotplug_deregister_callback() |
| * or the supplied callback returns 1 to indicate it is finished processing events. |
| * |
| * If the \ref LIBUSB_HOTPLUG_ENUMERATE is passed the callback will be |
| * called with a \ref LIBUSB_HOTPLUG_EVENT_DEVICE_ARRIVED for all devices |
| * already plugged into the machine. Note that libusb modifies its internal |
| * device list from a separate thread, while calling hotplug callbacks from |
| * libusb_handle_events(), so it is possible for a device to already be present |
| * on, or removed from, its internal device list, while the hotplug callbacks |
| * still need to be dispatched. This means that when using \ref |
| * LIBUSB_HOTPLUG_ENUMERATE, your callback may be called twice for the arrival |
| * of the same device, once from libusb_hotplug_register_callback() and once |
| * from libusb_handle_events(); and/or your callback may be called for the |
| * removal of a device for which an arrived call was never made. |
| * |
| * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102 |
| * |
| * \param[in] ctx context to register this callback with |
| * \param[in] events bitwise or of events that will trigger this callback. See \ref |
| * libusb_hotplug_event |
| * \param[in] flags hotplug callback flags. See \ref libusb_hotplug_flag |
| * \param[in] vendor_id the vendor id to match or \ref LIBUSB_HOTPLUG_MATCH_ANY |
| * \param[in] product_id the product id to match or \ref LIBUSB_HOTPLUG_MATCH_ANY |
| * \param[in] dev_class the device class to match or \ref LIBUSB_HOTPLUG_MATCH_ANY |
| * \param[in] cb_fn the function to be invoked on a matching event/device |
| * \param[in] user_data user data to pass to the callback function |
| * \param[out] callback_handle pointer to store the handle of the allocated callback (can be NULL) |
| * \returns LIBUSB_SUCCESS on success LIBUSB_ERROR code on failure |
| */ |
| int LIBUSB_CALL libusb_hotplug_register_callback(libusb_context *ctx, |
| libusb_hotplug_event events, |
| libusb_hotplug_flag flags, |
| int vendor_id, int product_id, |
| int dev_class, |
| libusb_hotplug_callback_fn cb_fn, |
| void *user_data, |
| libusb_hotplug_callback_handle *callback_handle); |
| |
| /** \ingroup libusb_hotplug |
| * Deregisters a hotplug callback. |
| * |
| * Deregister a callback from a libusb_context. This function is safe to call from within |
| * a hotplug callback. |
| * |
| * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102 |
| * |
| * \param[in] ctx context this callback is registered with |
| * \param[in] callback_handle the handle of the callback to deregister |
| */ |
| void LIBUSB_CALL libusb_hotplug_deregister_callback(libusb_context *ctx, |
| libusb_hotplug_callback_handle callback_handle); |
| |
| /** \ingroup libusb_lib |
| * Available option values for libusb_set_option(). |
| */ |
| enum libusb_option { |
| /** Set the log message verbosity. |
| * |
| * The default level is LIBUSB_LOG_LEVEL_NONE, which means no messages are ever |
| * printed. If you choose to increase the message verbosity level, ensure |
| * that your application does not close the stderr file descriptor. |
| * |
| * You are advised to use level LIBUSB_LOG_LEVEL_WARNING. libusb is conservative |
| * with its message logging and most of the time, will only log messages that |
| * explain error conditions and other oddities. This will help you debug |
| * your software. |
| * |
| * If the LIBUSB_DEBUG environment variable was set when libusb was |
| * initialized, this function does nothing: the message verbosity is fixed |
| * to the value in the environment variable. |
| * |
| * If libusb was compiled without any message logging, this function does |
| * nothing: you'll never get any messages. |
| * |
| * If libusb was compiled with verbose debug message logging, this function |
| * does nothing: you'll always get messages from all levels. |
| */ |
| LIBUSB_OPTION_LOG_LEVEL, |
| |
| /** Use the UsbDk backend for a specific context, if available. |
| * |
| * This option should be set immediately after calling libusb_init(), otherwise |
| * unspecified behavior may occur. |
| * |
| * Only valid on Windows. |
| */ |
| LIBUSB_OPTION_USE_USBDK, |
| }; |
| |
| int LIBUSB_CALL libusb_set_option(libusb_context *ctx, enum libusb_option option, ...); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif |