/*
 * Copyright (c) 2015, 2025, Oracle and/or its affiliates. All rights reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.  Oracle designates this
 * particular file as subject to the "Classpath" exception as provided
 * by Oracle in the LICENSE file that accompanied this code.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 * or visit www.oracle.com if you need additional information or have any
 * questions.
 */

/**
 * Defines the HTTP Client and WebSocket APIs.
 * <p>
 * <b id="httpclientprops">System properties used by the java.net.http API</b>
 * <p>
 * The following is a list of system networking properties used by the java.net.http
 * client implementation in the JDK. Any properties below that take a numeric value
 * assume the default value if given a string that does not parse as a number.
 * Unless otherwise specified below, all values can be set in the {@code conf/net.properties}
 * file. In all cases, values can be specified as system properties on the command line,
 * in which case, any value in {@code conf/net.properties} is overridden. No guarantee is
 * provided that property values can be set programatically with {@code System.setProperty()}.
 * Other implementations of this API may choose not to support these properties.
 * <ul>
 * <li><p><b>{@systemProperty jdk.httpclient.allowRestrictedHeaders}</b> (default: see below)<br>
 * A comma-separated list of normally restricted HTTP header names that users may set in HTTP
 * requests or by user code in HttpRequest instances. By default, the following request
 * headers are not allowed to be set by user code: connection, content-length, expect, host,
 * and upgrade. You can override this behavior with this property. The names are case-insensitive
 * and whitespace is ignored. Note that this property is intended for testing and not for
 * real-world deployments. Protocol errors or other undefined behavior are likely to occur
 * when using this property. There may be other headers that are restricted from being set
 * depending on the context. These restrictions cannot be overridden by this property.
 * </li>
 * <li><p><b>{@systemProperty jdk.httpclient.bufsize}</b> (default: 16384 bytes or 16 kB)<br>
 * The size to use for internal allocated buffers in bytes.
 * </li>
 * <li><p><b>{@systemProperty jdk.httpclient.connectionPoolSize}</b> (default: 0)<br>
 * The maximum number of connections to keep in the HTTP/1.1 keep alive cache. A value of 0
 * means that the cache is unbounded.
 * </li>
 * <li><p><b>{@systemProperty jdk.httpclient.connectionWindowSize}</b> (default: 2^26)<br>
 * The HTTP/2 client connection window size in bytes. Valid values are in the range
 * [2^16-1, 2^31-1]. If an invalid value is provided, the default value is used.
 * The implementation guarantees that the actual value will be no smaller than the stream
 * window size, which can be configured through the {@code jdk.httpclient.windowsize}
 * system property.
 * </li>
 * <li><p><b>{@systemProperty jdk.httpclient.disableRetryConnect}</b> (default: false)<br>
 * Whether automatic retry of connection failures is disabled. If false, then retries are
 * attempted (subject to the retry limit).
 * </li>
 * <li><p><b>{@systemProperty jdk.httpclient.enableAllMethodRetry}</b> (default: false)<br>
 * Whether it is permitted to automatically retry non-idempotent HTTP requests.
 * </li>
 * <li><p><b>{@systemProperty jdk.httpclient.enablepush}</b> (default: 1)<br>
 * Whether HTTP/2 push promise is enabled. A value of 1 enables push promise; a value of 0
 * disables it.
 * </li>
 * <li><p><b>{@systemProperty jdk.httpclient.hpack.maxheadertablesize}</b> (default: 16384 or
 * 16 kB)<br> The HTTP/2 client maximum HPACK header table size in bytes.
 * </li>
 * <li><p><b>{@systemProperty jdk.httpclient.HttpClient.log}</b> (default: none)<br>
 * Enables high-level logging of various events through the {@linkplain java.lang.System.Logger
 * Platform Logging API}. The value contains a comma-separated list of any of the
 * following items:
 * <ul>
 *   <li>errors</li>
 *   <li>requests</li>
 *   <li>headers</li>
 *   <li>content</li>
 *   <li>frames</li>
 *   <li>ssl</li>
 *   <li>trace</li>
 *   <li>channel</li>
 * </ul><br>
 * You can append the frames item with a colon-separated list of any of the following items:
 * <ul>
 *   <li>control</li>
 *   <li>data</li>
 *   <li>window</li>
 *   <li>all</li>
 * </ul><br>
 * Specifying an item adds it to the HTTP client's log. For example, if you specify the
 * following value, then the Platform Logging API logs all possible HTTP Client events:<br>
 * "errors,requests,headers,frames:control:data:window,ssl,trace,channel"<br>
 * Note that you can replace control:data:window with all. The name of the logger is
 * "jdk.httpclient.HttpClient", and all logging is at level INFO.
 * </li>
 * <li><p><b>{@systemProperty jdk.httpclient.keepalive.timeout}</b> (default: 30)<br>
 * The number of seconds to keep idle HTTP connections alive in the keep alive cache. This
 * property applies to both HTTP/1.1 and HTTP/2. The value for HTTP/2 can be overridden
 * with the {@code jdk.httpclient.keepalive.timeout.h2 property}.
 * </li>
 * <li><p><b>{@systemProperty jdk.httpclient.keepalive.timeout.h2}</b> (default: see
 * below)<br>The number of seconds to keep idle HTTP/2 connections alive. If not set, then the
 * {@code jdk.httpclient.keepalive.timeout} setting is used.
 * </li>
 * <li><p><b>{@systemProperty jdk.httpclient.maxframesize}</b> (default: 16384 or 16kB)<br>
 * The HTTP/2 client maximum frame size in bytes. The server is not permitted to send a frame
 * larger than this.
 * </li>
 * <li><p><b>{@systemProperty jdk.httpclient.maxLiteralWithIndexing}</b> (default: 512)<br>
 * The maximum number of header field lines (header name and value pairs) that a
 * client is willing to add to the HPack Decoder dynamic table during the decoding
 * of an entire header field section.
 * This is purely an implementation limit.
 * If a peer sends a field section with encoding that
 * exceeds this limit a {@link java.net.ProtocolException ProtocolException} will be raised.
 * A value of zero or a negative value means no limit.
 * </li>
 * <li><p><b>{@systemProperty jdk.httpclient.maxNonFinalResponses}</b> (default: 8)<br>
 * The maximum number of interim (non-final) responses that a client is prepared
 * to accept on a request-response stream before the final response is received.
 * Interim responses are responses with a status in the range [100, 199] inclusive.
 * This is purely an implementation limit.
 * If a peer sends a number of interim response that exceeds this limit before
 * sending the final response, a {@link java.net.ProtocolException ProtocolException}
 * will be raised.
 * A value of zero or a negative value means no limit.
 * </li>
 * <li><p><b>{@systemProperty jdk.httpclient.maxstreams}</b> (default: 100)<br>
 * The maximum number of HTTP/2 push streams that the client will permit servers to open
 * simultaneously.
 * </li>
 * <li><p><b>{@systemProperty jdk.httpclient.receiveBufferSize}</b> (default: operating system
 * default)<br>The HTTP client {@linkplain java.nio.channels.SocketChannel socket}
 * {@linkplain java.net.StandardSocketOptions#SO_RCVBUF receive buffer size} in bytes.
 * Values less than or equal to zero are ignored.
 * </li>
 * <li><p><b>{@systemProperty jdk.httpclient.redirects.retrylimit}</b> (default: 5)<br>
 * The maximum number of attempts to send a HTTP request when redirected or any failure occurs
 * for any reason.
 * </li>
 * <li><p><b>{@systemProperty jdk.httpclient.websocket.writeBufferSize}</b> (default: 16384
 * or 16kB)<br>The buffer size used by the web socket implementation for socket writes.
 * </li>
 * <li><p><b>{@systemProperty jdk.httpclient.windowsize}</b> (default: 16777216 or 16 MB)<br>
 * The HTTP/2 client stream window size in bytes. Valid values are in the range [2^14, 2^31-1].
 * If an invalid value is provided, the default value is used.
 * </li>
 * <li><p><b>{@systemProperty jdk.httpclient.auth.retrylimit}</b> (default: 3)<br>
 * The number of attempts the Basic authentication filter will attempt to retry a failed
 * authentication.
 * </li>
 * <li><p><b>{@systemProperty jdk.httpclient.sendBufferSize}</b> (default: operating system
 * default)<br>The HTTP client {@linkplain java.nio.channels.SocketChannel socket}
 * {@linkplain java.net.StandardSocketOptions#SO_SNDBUF send buffer size} in bytes.
 * Values less than or equal to zero are ignored.
 * </li>
 * <li><p><b>{@systemProperty jdk.internal.httpclient.disableHostnameVerification}</b> (default:
 * false)<br>If true (or set to an empty string), hostname verification in SSL certificates
 * is disabled. This is a system property only and not available in {@code conf/net.properties}.
 * It is provided for testing purposes only.
 * </li>
 * <li><p><b>{@systemProperty jdk.http.auth.proxying.disabledSchemes}</b> (default: see
 * conf/net.properties)<br>A comma separated list of HTTP authentication scheme names,
 * that are disallowed for use by the HTTP client implementation, for HTTP proxying.
 * </li>
 * <li><p><b>{@systemProperty jdk.http.auth.tunneling.disabledSchemes}</b> (default: see
 * conf/net.properties)<br>A comma separated list of HTTP authentication scheme names, that
 * are disallowed for use by the HTTP client implementation, for HTTP CONNECT tunneling.
 * </li>
 * <li><p><b>{@systemProperty jdk.http.maxHeaderSize}</b> (default: 393216 or 384kB)
 * <br>The maximum header field section size that the client is prepared to accept.
 * This is computed as the sum of the size of the uncompressed header name, plus
 * the size of the uncompressed header value, plus an overhead of 32 bytes for
 * each field section line. If a peer sends a field section that exceeds this
 * size a {@link java.net.ProtocolException ProtocolException} will be raised.
 * This applies to all versions of the protocol. A value of zero or a negative
 * value means no limit.
 * </li>
 * </ul>
 * @moduleGraph
 * @since 11
 */
module java.net.http {
    exports java.net.http;
}