/*
 * Copyright (c) 1997, 2025, Oracle and/or its affiliates. All rights reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 * or visit www.oracle.com if you need additional information or have any
 * questions.
 *
 */

#include "memory/allocation.inline.hpp"
#include "opto/addnode.hpp"
#include "opto/connode.hpp"
#include "opto/convertnode.hpp"
#include "opto/memnode.hpp"
#include "opto/mulnode.hpp"
#include "opto/phaseX.hpp"
#include "opto/subnode.hpp"
#include "utilities/powerOfTwo.hpp"

// Portions of code courtesy of Clifford Click


//=============================================================================
//------------------------------hash-------------------------------------------
// Hash function over MulNodes.  Needs to be commutative; i.e., I swap
// (commute) inputs to MulNodes willy-nilly so the hash function must return
// the same value in the presence of edge swapping.
uint MulNode::hash() const {
  return (uintptr_t)in(1) + (uintptr_t)in(2) + Opcode();
}

//------------------------------Identity---------------------------------------
// Multiplying a one preserves the other argument
Node* MulNode::Identity(PhaseGVN* phase) {
  const Type *one = mul_id();  // The multiplicative identity
  if( phase->type( in(1) )->higher_equal( one ) ) return in(2);
  if( phase->type( in(2) )->higher_equal( one ) ) return in(1);

  return this;
}

//------------------------------Ideal------------------------------------------
// We also canonicalize the Node, moving constants to the right input,
// and flatten expressions (so that 1+x+2 becomes x+3).
Node *MulNode::Ideal(PhaseGVN *phase, bool can_reshape) {
  Node* in1 = in(1);
  Node* in2 = in(2);
  Node* progress = nullptr;        // Progress flag

  // This code is used by And nodes too, but some conversions are
  // only valid for the actual Mul nodes.
  uint op = Opcode();
  bool real_mul = (op == Op_MulI) || (op == Op_MulL) ||
                  (op == Op_MulF) || (op == Op_MulD) ||
                  (op == Op_MulHF);

  // Convert "(-a)*(-b)" into "a*b".
  if (real_mul && in1->is_Sub() && in2->is_Sub()) {
    if (phase->type(in1->in(1))->is_zero_type() &&
        phase->type(in2->in(1))->is_zero_type()) {
      set_req_X(1, in1->in(2), phase);
      set_req_X(2, in2->in(2), phase);
      in1 = in(1);
      in2 = in(2);
      progress = this;
    }
  }

  // convert "max(a,b) * min(a,b)" into "a*b".
  if ((in(1)->Opcode() == max_opcode() && in(2)->Opcode() == min_opcode())
      || (in(1)->Opcode() == min_opcode() && in(2)->Opcode() == max_opcode())) {
    Node *in11 = in(1)->in(1);
    Node *in12 = in(1)->in(2);

    Node *in21 = in(2)->in(1);
    Node *in22 = in(2)->in(2);

    if ((in11 == in21 && in12 == in22) ||
        (in11 == in22 && in12 == in21)) {
      set_req_X(1, in11, phase);
      set_req_X(2, in12, phase);
      in1 = in(1);
      in2 = in(2);
      progress = this;
    }
  }

  const Type* t1 = phase->type(in1);
  const Type* t2 = phase->type(in2);

  // We are OK if right is a constant, or right is a load and
  // left is a non-constant.
  if( !(t2->singleton() ||
        (in(2)->is_Load() && !(t1->singleton() || in(1)->is_Load())) ) ) {
    if( t1->singleton() ||       // Left input is a constant?
        // Otherwise, sort inputs (commutativity) to help value numbering.
        (in(1)->_idx > in(2)->_idx) ) {
      swap_edges(1, 2);
      const Type *t = t1;
      t1 = t2;
      t2 = t;
      progress = this;            // Made progress
    }
  }

  // If the right input is a constant, and the left input is a product of a
  // constant, flatten the expression tree.
  if( t2->singleton() &&        // Right input is a constant?
      op != Op_MulF &&          // Float & double cannot reassociate
      op != Op_MulD &&
      op != Op_MulHF) {
    if( t2 == Type::TOP ) return nullptr;
    Node *mul1 = in(1);
#ifdef ASSERT
    // Check for dead loop
    int op1 = mul1->Opcode();
    if ((mul1 == this) || (in(2) == this) ||
        ((op1 == mul_opcode() || op1 == add_opcode()) &&
         ((mul1->in(1) == this) || (mul1->in(2) == this) ||
          (mul1->in(1) == mul1) || (mul1->in(2) == mul1)))) {
      assert(false, "dead loop in MulNode::Ideal");
    }
#endif

    if( mul1->Opcode() == mul_opcode() ) {  // Left input is a multiply?
      // Mul of a constant?
      const Type *t12 = phase->type( mul1->in(2) );
      if( t12->singleton() && t12 != Type::TOP) { // Left input is an add of a constant?
        // Compute new constant; check for overflow
        const Type *tcon01 = ((MulNode*)mul1)->mul_ring(t2,t12);
        if( tcon01->singleton() ) {
          // The Mul of the flattened expression
          set_req_X(1, mul1->in(1), phase);
          set_req_X(2, phase->makecon(tcon01), phase);
          t2 = tcon01;
          progress = this;      // Made progress
        }
      }
    }
    // If the right input is a constant, and the left input is an add of a
    // constant, flatten the tree: (X+con1)*con0 ==> X*con0 + con1*con0
    const Node *add1 = in(1);
    if( add1->Opcode() == add_opcode() ) {      // Left input is an add?
      // Add of a constant?
      const Type *t12 = phase->type( add1->in(2) );
      if( t12->singleton() && t12 != Type::TOP ) { // Left input is an add of a constant?
        assert( add1->in(1) != add1, "dead loop in MulNode::Ideal" );
        // Compute new constant; check for overflow
        const Type *tcon01 = mul_ring(t2,t12);
        if( tcon01->singleton() ) {

        // Convert (X+con1)*con0 into X*con0
          Node *mul = clone();    // mul = ()*con0
          mul->set_req(1,add1->in(1));  // mul = X*con0
          mul = phase->transform(mul);

          Node *add2 = add1->clone();
          add2->set_req(1, mul);        // X*con0 + con0*con1
          add2->set_req(2, phase->makecon(tcon01) );
          progress = add2;
        }
      }
    } // End of is left input an add
  } // End of is right input a Mul

  return progress;
}

//------------------------------Value-----------------------------------------
const Type* MulNode::Value(PhaseGVN* phase) const {
  const Type *t1 = phase->type( in(1) );
  const Type *t2 = phase->type( in(2) );
  // Either input is TOP ==> the result is TOP
  if( t1 == Type::TOP ) return Type::TOP;
  if( t2 == Type::TOP ) return Type::TOP;

  // Either input is ZERO ==> the result is ZERO.
  // Not valid for floats or doubles since +0.0 * -0.0 --> +0.0
  int op = Opcode();
  if( op == Op_MulI || op == Op_AndI || op == Op_MulL || op == Op_AndL ) {
    const Type *zero = add_id();        // The multiplicative zero
    if( t1->higher_equal( zero ) ) return zero;
    if( t2->higher_equal( zero ) ) return zero;
  }

  // Either input is BOTTOM ==> the result is the local BOTTOM
  if( t1 == Type::BOTTOM || t2 == Type::BOTTOM )
    return bottom_type();

#if defined(IA32)
  // Can't trust native compilers to properly fold strict double
  // multiplication with round-to-zero on this platform.
  if (op == Op_MulD) {
    return TypeD::DOUBLE;
  }
#endif

  return mul_ring(t1,t2);            // Local flavor of type multiplication
}

MulNode* MulNode::make(Node* in1, Node* in2, BasicType bt) {
  switch (bt) {
    case T_INT:
      return new MulINode(in1, in2);
    case T_LONG:
      return new MulLNode(in1, in2);
    default:
      fatal("Not implemented for %s", type2name(bt));
  }
  return nullptr;
}

MulNode* MulNode::make_and(Node* in1, Node* in2, BasicType bt) {
  switch (bt) {
    case T_INT:
      return new AndINode(in1, in2);
    case T_LONG:
      return new AndLNode(in1, in2);
    default:
      fatal("Not implemented for %s", type2name(bt));
  }
  return nullptr;
}


//=============================================================================
//------------------------------Ideal------------------------------------------
// Check for power-of-2 multiply, then try the regular MulNode::Ideal
Node *MulINode::Ideal(PhaseGVN *phase, bool can_reshape) {
  const jint con = in(2)->find_int_con(0);
  if (con == 0) {
    // If in(2) is not a constant, call Ideal() of the parent class to
    // try to move constant to the right side.
    return MulNode::Ideal(phase, can_reshape);
  }

  // Now we have a constant Node on the right and the constant in con.
  if (con == 1) {
    // By one is handled by Identity call
    return nullptr;
  }

  // Check for negative constant; if so negate the final result
  bool sign_flip = false;

  unsigned int abs_con = g_uabs(con);
  if (abs_con != (unsigned int)con) {
    sign_flip = true;
  }

  // Get low bit; check for being the only bit
  Node *res = nullptr;
  unsigned int bit1 = submultiple_power_of_2(abs_con);
  if (bit1 == abs_con) {           // Found a power of 2?
    res = new LShiftINode(in(1), phase->intcon(log2i_exact(bit1)));
  } else {
    // Check for constant with 2 bits set
    unsigned int bit2 = abs_con - bit1;
    bit2 = bit2 & (0 - bit2);          // Extract 2nd bit
    if (bit2 + bit1 == abs_con) {    // Found all bits in con?
      Node *n1 = phase->transform(new LShiftINode(in(1), phase->intcon(log2i_exact(bit1))));
      Node *n2 = phase->transform(new LShiftINode(in(1), phase->intcon(log2i_exact(bit2))));
      res = new AddINode(n2, n1);
    } else if (is_power_of_2(abs_con + 1)) {
      // Sleezy: power-of-2 - 1.  Next time be generic.
      unsigned int temp = abs_con + 1;
      Node *n1 = phase->transform(new LShiftINode(in(1), phase->intcon(log2i_exact(temp))));
      res = new SubINode(n1, in(1));
    } else {
      return MulNode::Ideal(phase, can_reshape);
    }
  }

  if (sign_flip) {             // Need to negate result?
    res = phase->transform(res);// Transform, before making the zero con
    res = new SubINode(phase->intcon(0),res);
  }

  return res;                   // Return final result
}

// This template class performs type multiplication for MulI/MulLNode. NativeType is either jint or jlong.
// In this class, the inputs of the MulNodes are named left and right with types [left_lo,left_hi] and [right_lo,right_hi].
//
// In general, the multiplication of two x-bit values could produce a result that consumes up to 2x bits if there is
// enough space to hold them all. We can therefore distinguish the following two cases for the product:
// - no overflow (i.e. product fits into x bits)
// - overflow (i.e. product does not fit into x bits)
//
// When multiplying the two x-bit inputs 'left' and 'right' with their x-bit types [left_lo,left_hi] and [right_lo,right_hi]
// we need to find the minimum and maximum of all possible products to define a new type. To do that, we compute the
// cross product of [left_lo,left_hi] and [right_lo,right_hi] in 2x-bit space where no over- or underflow can happen.
// The cross product consists of the following four multiplications with 2x-bit results:
// (1) left_lo * right_lo
// (2) left_lo * right_hi
// (3) left_hi * right_lo
// (4) left_hi * right_hi
//
// Let's define the following two functions:
// - Lx(i): Returns the lower x bits of the 2x-bit number i.
// - Ux(i): Returns the upper x bits of the 2x-bit number i.
//
// Let's first assume all products are positive where only overflows are possible but no underflows. If there is no
// overflow for a product p, then the upper x bits of the 2x-bit result p are all zero:
//     Ux(p) = 0
//     Lx(p) = p
//
// If none of the multiplications (1)-(4) overflow, we can truncate the upper x bits and use the following result type
// with x bits:
//      [result_lo,result_hi] = [MIN(Lx(1),Lx(2),Lx(3),Lx(4)),MAX(Lx(1),Lx(2),Lx(3),Lx(4))]
//
// If any of these multiplications overflows, we could pessimistically take the bottom type for the x bit result
// (i.e. all values in the x-bit space could be possible):
//      [result_lo,result_hi] = [NativeType_min,NativeType_max]
//
// However, in case of any overflow, we can do better by analyzing the upper x bits of all multiplications (1)-(4) with
// 2x-bit results. The upper x bits tell us something about how many times a multiplication has overflown the lower
// x bits. If the upper x bits of (1)-(4) are all equal, then we know that all of these multiplications overflowed
// the lower x bits the same number of times:
//     Ux((1)) = Ux((2)) = Ux((3)) = Ux((4))
//
// If all upper x bits are equal, we can conclude:
//     Lx(MIN((1),(2),(3),(4))) = MIN(Lx(1),Lx(2),Lx(3),Lx(4)))
//     Lx(MAX((1),(2),(3),(4))) = MAX(Lx(1),Lx(2),Lx(3),Lx(4)))
//
// Therefore, we can use the same precise x-bit result type as for the no-overflow case:
//     [result_lo,result_hi] = [(MIN(Lx(1),Lx(2),Lx(3),Lx(4))),MAX(Lx(1),Lx(2),Lx(3),Lx(4)))]
//
//
// Now let's assume that (1)-(4) are signed multiplications where over- and underflow could occur:
// Negative numbers are all sign extend with ones. Therefore, if a negative product does not underflow, then the
// upper x bits of the 2x-bit result are all set to ones which is minus one in two's complement. If there is an underflow,
// the upper x bits are decremented by the number of times an underflow occurred. The smallest possible negative product
// is NativeType_min*NativeType_max, where the upper x bits are set to NativeType_min / 2 (b11...0). It is therefore
// impossible to underflow the upper x bits. Thus, when having all ones (i.e. minus one) in the upper x bits, we know
// that there is no underflow.
//
// To be able to compare the number of over-/underflows of positive and negative products, respectively, we normalize
// the upper x bits of negative 2x-bit products by adding one. This way a product has no over- or underflow if the
// normalized upper x bits are zero. Now we can use the same improved type as for strictly positive products because we
// can compare the upper x bits in a unified way with N() being the normalization function:
//     N(Ux((1))) = N(Ux((2))) = N(Ux((3)) = N(Ux((4)))
template<typename NativeType>
class IntegerTypeMultiplication {

  NativeType _lo_left;
  NativeType _lo_right;
  NativeType _hi_left;
  NativeType _hi_right;
  short _widen_left;
  short _widen_right;

  static const Type* overflow_type();
  static NativeType multiply_high(NativeType x, NativeType y);
  const Type* create_type(NativeType lo, NativeType hi) const;

  static NativeType multiply_high_signed_overflow_value(NativeType x, NativeType y) {
    return normalize_overflow_value(x, y, multiply_high(x, y));
  }

  bool cross_product_not_same_overflow_value() const {
    const NativeType lo_lo_high_product = multiply_high_signed_overflow_value(_lo_left, _lo_right);
    const NativeType lo_hi_high_product = multiply_high_signed_overflow_value(_lo_left, _hi_right);
    const NativeType hi_lo_high_product = multiply_high_signed_overflow_value(_hi_left, _lo_right);
    const NativeType hi_hi_high_product = multiply_high_signed_overflow_value(_hi_left, _hi_right);
    return lo_lo_high_product != lo_hi_high_product ||
           lo_hi_high_product != hi_lo_high_product ||
           hi_lo_high_product != hi_hi_high_product;
  }

  bool does_product_overflow(NativeType x, NativeType y) const {
    return multiply_high_signed_overflow_value(x, y) != 0;
  }

  static NativeType normalize_overflow_value(const NativeType x, const NativeType y, NativeType result) {
    return java_multiply(x, y) < 0 ? result + 1 : result;
  }

 public:
  template<class IntegerType>
  IntegerTypeMultiplication(const IntegerType* left, const IntegerType* right)
      : _lo_left(left->_lo), _lo_right(right->_lo),
        _hi_left(left->_hi), _hi_right(right->_hi),
        _widen_left(left->_widen), _widen_right(right->_widen)  {}

  // Compute the product type by multiplying the two input type ranges. We take the minimum and maximum of all possible
  // values (requires 4 multiplications of all possible combinations of the two range boundary values). If any of these
  // multiplications overflows/underflows, we need to make sure that they all have the same number of overflows/underflows
  // If that is not the case, we return the bottom type to cover all values due to the inconsistent overflows/underflows).
  const Type* compute() const {
    if (cross_product_not_same_overflow_value()) {
      return overflow_type();
    }

    NativeType lo_lo_product = java_multiply(_lo_left, _lo_right);
    NativeType lo_hi_product = java_multiply(_lo_left, _hi_right);
    NativeType hi_lo_product = java_multiply(_hi_left, _lo_right);
    NativeType hi_hi_product = java_multiply(_hi_left, _hi_right);
    const NativeType min = MIN4(lo_lo_product, lo_hi_product, hi_lo_product, hi_hi_product);
    const NativeType max = MAX4(lo_lo_product, lo_hi_product, hi_lo_product, hi_hi_product);
    return create_type(min, max);
  }

  bool does_overflow() const {
    return does_product_overflow(_lo_left, _lo_right) ||
           does_product_overflow(_lo_left, _hi_right) ||
           does_product_overflow(_hi_left, _lo_right) ||
           does_product_overflow(_hi_left, _hi_right);
  }
};

template <>
const Type* IntegerTypeMultiplication<jint>::overflow_type() {
  return TypeInt::INT;
}

template <>
jint IntegerTypeMultiplication<jint>::multiply_high(const jint x, const jint y) {
  const jlong x_64 = x;
  const jlong y_64 = y;
  const jlong product = x_64 * y_64;
  return (jint)((uint64_t)product >> 32u);
}

template <>
const Type* IntegerTypeMultiplication<jint>::create_type(jint lo, jint hi) const {
  return TypeInt::make(lo, hi, MAX2(_widen_left, _widen_right));
}

template <>
const Type* IntegerTypeMultiplication<jlong>::overflow_type() {
  return TypeLong::LONG;
}

template <>
jlong IntegerTypeMultiplication<jlong>::multiply_high(const jlong x, const jlong y) {
  return multiply_high_signed(x, y);
}

template <>
const Type* IntegerTypeMultiplication<jlong>::create_type(jlong lo, jlong hi) const {
  return TypeLong::make(lo, hi, MAX2(_widen_left, _widen_right));
}

// Compute the product type of two integer ranges into this node.
const Type* MulINode::mul_ring(const Type* type_left, const Type* type_right) const {
  const IntegerTypeMultiplication<jint> integer_multiplication(type_left->is_int(), type_right->is_int());
  return integer_multiplication.compute();
}

bool MulINode::does_overflow(const TypeInt* type_left, const TypeInt* type_right) {
  const IntegerTypeMultiplication<jint> integer_multiplication(type_left, type_right);
  return integer_multiplication.does_overflow();
}

// Compute the product type of two long ranges into this node.
const Type* MulLNode::mul_ring(const Type* type_left, const Type* type_right) const {
  const IntegerTypeMultiplication<jlong> integer_multiplication(type_left->is_long(), type_right->is_long());
  return integer_multiplication.compute();
}

//=============================================================================
//------------------------------Ideal------------------------------------------
// Check for power-of-2 multiply, then try the regular MulNode::Ideal
Node *MulLNode::Ideal(PhaseGVN *phase, bool can_reshape) {
  const jlong con = in(2)->find_long_con(0);
  if (con == 0) {
    // If in(2) is not a constant, call Ideal() of the parent class to
    // try to move constant to the right side.
    return MulNode::Ideal(phase, can_reshape);
  }

  // Now we have a constant Node on the right and the constant in con.
  if (con == 1) {
    // By one is handled by Identity call
    return nullptr;
  }

  // Check for negative constant; if so negate the final result
  bool sign_flip = false;
  julong abs_con = g_uabs(con);
  if (abs_con != (julong)con) {
    sign_flip = true;
  }

  // Get low bit; check for being the only bit
  Node *res = nullptr;
  julong bit1 = submultiple_power_of_2(abs_con);
  if (bit1 == abs_con) {           // Found a power of 2?
    res = new LShiftLNode(in(1), phase->intcon(log2i_exact(bit1)));
  } else {

    // Check for constant with 2 bits set
    julong bit2 = abs_con-bit1;
    bit2 = bit2 & (0-bit2);          // Extract 2nd bit
    if (bit2 + bit1 == abs_con) {    // Found all bits in con?
      Node *n1 = phase->transform(new LShiftLNode(in(1), phase->intcon(log2i_exact(bit1))));
      Node *n2 = phase->transform(new LShiftLNode(in(1), phase->intcon(log2i_exact(bit2))));
      res = new AddLNode(n2, n1);

    } else if (is_power_of_2(abs_con+1)) {
      // Sleezy: power-of-2 -1.  Next time be generic.
      julong temp = abs_con + 1;
      Node *n1 = phase->transform( new LShiftLNode(in(1), phase->intcon(log2i_exact(temp))));
      res = new SubLNode(n1, in(1));
    } else {
      return MulNode::Ideal(phase, can_reshape);
    }
  }

  if (sign_flip) {             // Need to negate result?
    res = phase->transform(res);// Transform, before making the zero con
    res = new SubLNode(phase->longcon(0),res);
  }

  return res;                   // Return final result
}

//=============================================================================
//------------------------------mul_ring---------------------------------------
// Compute the product type of two double ranges into this node.
const Type *MulFNode::mul_ring(const Type *t0, const Type *t1) const {
  if( t0 == Type::FLOAT || t1 == Type::FLOAT ) return Type::FLOAT;
  return TypeF::make( t0->getf() * t1->getf() );
}

//------------------------------Ideal---------------------------------------
// Check to see if we are multiplying by a constant 2 and convert to add, then try the regular MulNode::Ideal
Node* MulFNode::Ideal(PhaseGVN* phase, bool can_reshape) {
  const TypeF *t2 = phase->type(in(2))->isa_float_constant();

  // x * 2 -> x + x
  if (t2 != nullptr && t2->getf() == 2) {
    Node* base = in(1);
    return new AddFNode(base, base);
  }
  return MulNode::Ideal(phase, can_reshape);
}

//=============================================================================
//------------------------------Ideal------------------------------------------
// Check to see if we are multiplying by a constant 2 and convert to add, then try the regular MulNode::Ideal
Node* MulHFNode::Ideal(PhaseGVN* phase, bool can_reshape) {
  const TypeH* t2 = phase->type(in(2))->isa_half_float_constant();

  // x * 2 -> x + x
  if (t2 != nullptr && t2->getf() == 2) {
    Node* base = in(1);
    return new AddHFNode(base, base);
  }
  return MulNode::Ideal(phase, can_reshape);
}

// Compute the product type of two half float ranges into this node.
const Type* MulHFNode::mul_ring(const Type* t0, const Type* t1) const {
  if (t0 == Type::HALF_FLOAT || t1 == Type::HALF_FLOAT) {
    return Type::HALF_FLOAT;
  }
  return TypeH::make(t0->getf() * t1->getf());
}

//=============================================================================
//------------------------------mul_ring---------------------------------------
// Compute the product type of two double ranges into this node.
const Type *MulDNode::mul_ring(const Type *t0, const Type *t1) const {
  if( t0 == Type::DOUBLE || t1 == Type::DOUBLE ) return Type::DOUBLE;
  // We must be multiplying 2 double constants.
  return TypeD::make( t0->getd() * t1->getd() );
}

//------------------------------Ideal---------------------------------------
// Check to see if we are multiplying by a constant 2 and convert to add, then try the regular MulNode::Ideal
Node* MulDNode::Ideal(PhaseGVN* phase, bool can_reshape) {
  const TypeD *t2 = phase->type(in(2))->isa_double_constant();

  // x * 2 -> x + x
  if (t2 != nullptr && t2->getd() == 2) {
    Node* base = in(1);
    return new AddDNode(base, base);
  }

  return MulNode::Ideal(phase, can_reshape);
}

//=============================================================================
//------------------------------Value------------------------------------------
const Type* MulHiLNode::Value(PhaseGVN* phase) const {
  const Type *t1 = phase->type( in(1) );
  const Type *t2 = phase->type( in(2) );
  const Type *bot = bottom_type();
  return MulHiValue(t1, t2, bot);
}

const Type* UMulHiLNode::Value(PhaseGVN* phase) const {
  const Type *t1 = phase->type( in(1) );
  const Type *t2 = phase->type( in(2) );
  const Type *bot = bottom_type();
  return MulHiValue(t1, t2, bot);
}

// A common routine used by UMulHiLNode and MulHiLNode
const Type* MulHiValue(const Type *t1, const Type *t2, const Type *bot) {
  // Either input is TOP ==> the result is TOP
  if( t1 == Type::TOP ) return Type::TOP;
  if( t2 == Type::TOP ) return Type::TOP;

  // Either input is BOTTOM ==> the result is the local BOTTOM
  if( (t1 == bot) || (t2 == bot) ||
      (t1 == Type::BOTTOM) || (t2 == Type::BOTTOM) )
    return bot;

  // It is not worth trying to constant fold this stuff!
  return TypeLong::LONG;
}

template<typename IntegerType>
static const IntegerType* and_value(const IntegerType* r0, const IntegerType* r1) {
  typedef typename IntegerType::NativeType NativeType;
  static_assert(std::is_signed<NativeType>::value, "Native type of IntegerType must be signed!");

  int widen = MAX2(r0->_widen, r1->_widen);

  // If both types are constants, we can calculate a constant result.
  if (r0->is_con() && r1->is_con()) {
    return IntegerType::make(r0->get_con() & r1->get_con());
  }

  // If both ranges are positive, the result will range from 0 up to the hi value of the smaller range. The minimum
  // of the two constrains the upper bound because any higher value in the other range will see all zeroes, so it will be masked out.
  if (r0->_lo >= 0 && r1->_lo >= 0) {
    return IntegerType::make(0, MIN2(r0->_hi, r1->_hi), widen);
  }

  // If only one range is positive, the result will range from 0 up to that range's maximum value.
  // For the operation 'x & C' where C is a positive constant, the result will be in the range [0..C]. With that observation,
  // we can say that for any integer c such that 0 <= c <= C will also be in the range [0..C]. Therefore, 'x & [c..C]'
  // where c >= 0 will be in the range [0..C].
  if (r0->_lo >= 0) {
    return IntegerType::make(0, r0->_hi, widen);
  }

  if (r1->_lo >= 0) {
    return IntegerType::make(0, r1->_hi, widen);
  }

  // At this point, all positive ranges will have already been handled, so the only remaining cases will be negative ranges
  // and constants.

  assert(r0->_lo < 0 && r1->_lo < 0, "positive ranges should already be handled!");

  // As two's complement means that both numbers will start with leading 1s, the lower bound of both ranges will contain
  // the common leading 1s of both minimum values. In order to count them with count_leading_zeros, the bits are inverted.
  NativeType sel_val = ~MIN2(r0->_lo, r1->_lo);

  NativeType min;
  if (sel_val == 0) {
    // Since count_leading_zeros is undefined at 0, we short-circuit the condition where both ranges have a minimum of -1.
    min = -1;
  } else {
    // To get the number of bits to shift, we count the leading 0-bits and then subtract one, as the sign bit is already set.
    int shift_bits = count_leading_zeros(sel_val) - 1;
    min = std::numeric_limits<NativeType>::min() >> shift_bits;
  }

  NativeType max;
  if (r0->_hi < 0 && r1->_hi < 0) {
    // If both ranges are negative, then the same optimization as both positive ranges will apply, and the smaller hi
    // value will mask off any bits set by higher values.
    max = MIN2(r0->_hi, r1->_hi);
  } else {
    // In the case of ranges that cross zero, negative values can cause the higher order bits to be set, so the maximum
    // positive value can be as high as the larger hi value.
    max = MAX2(r0->_hi, r1->_hi);
  }

  return IntegerType::make(min, max, widen);
}

//=============================================================================
//------------------------------mul_ring---------------------------------------
// Supplied function returns the product of the inputs IN THE CURRENT RING.
// For the logical operations the ring's MUL is really a logical AND function.
// This also type-checks the inputs for sanity.  Guaranteed never to
// be passed a TOP or BOTTOM type, these are filtered out by pre-check.
const Type *AndINode::mul_ring( const Type *t0, const Type *t1 ) const {
  const TypeInt* r0 = t0->is_int();
  const TypeInt* r1 = t1->is_int();

  return and_value<TypeInt>(r0, r1);
}

static bool AndIL_is_zero_element_under_mask(const PhaseGVN* phase, const Node* expr, const Node* mask, BasicType bt);

const Type* AndINode::Value(PhaseGVN* phase) const {
  if (AndIL_is_zero_element_under_mask(phase, in(1), in(2), T_INT) ||
      AndIL_is_zero_element_under_mask(phase, in(2), in(1), T_INT)) {
    return TypeInt::ZERO;
  }

  return MulNode::Value(phase);
}

//------------------------------Identity---------------------------------------
// Masking off the high bits of an unsigned load is not required
Node* AndINode::Identity(PhaseGVN* phase) {

  // x & x => x
  if (in(1) == in(2)) {
    return in(1);
  }

  Node* in1 = in(1);
  uint op = in1->Opcode();
  const TypeInt* t2 = phase->type(in(2))->isa_int();
  if (t2 && t2->is_con()) {
    int con = t2->get_con();
    // Masking off high bits which are always zero is useless.
    const TypeInt* t1 = phase->type(in(1))->isa_int();
    if (t1 != nullptr && t1->_lo >= 0) {
      jint t1_support = right_n_bits(1 + log2i_graceful(t1->_hi));
      if ((t1_support & con) == t1_support)
        return in1;
    }
    // Masking off the high bits of a unsigned-shift-right is not
    // needed either.
    if (op == Op_URShiftI) {
      const TypeInt* t12 = phase->type(in1->in(2))->isa_int();
      if (t12 && t12->is_con()) {  // Shift is by a constant
        int shift = t12->get_con();
        shift &= BitsPerJavaInteger - 1;  // semantics of Java shifts
        int mask = max_juint >> shift;
        if ((mask & con) == mask)  // If AND is useless, skip it
          return in1;
      }
    }
  }
  return MulNode::Identity(phase);
}

//------------------------------Ideal------------------------------------------
Node *AndINode::Ideal(PhaseGVN *phase, bool can_reshape) {
  // Simplify (v1 + v2) & mask to v1 & mask or v2 & mask when possible.
  Node* progress = AndIL_sum_and_mask(phase, T_INT);
  if (progress != nullptr) {
    return progress;
  }

  // Convert "(~a) & (~b)" into "~(a | b)"
  if (AddNode::is_not(phase, in(1), T_INT) && AddNode::is_not(phase, in(2), T_INT)) {
    Node* or_a_b = new OrINode(in(1)->in(1), in(2)->in(1));
    Node* tn = phase->transform(or_a_b);
    return AddNode::make_not(phase, tn, T_INT);
  }

  // Special case constant AND mask
  const TypeInt *t2 = phase->type( in(2) )->isa_int();
  if( !t2 || !t2->is_con() ) return MulNode::Ideal(phase, can_reshape);
  const int mask = t2->get_con();
  Node *load = in(1);
  uint lop = load->Opcode();

  // Masking bits off of a Character?  Hi bits are already zero.
  if( lop == Op_LoadUS &&
      (mask & 0xFFFF0000) )     // Can we make a smaller mask?
    return new AndINode(load,phase->intcon(mask&0xFFFF));

  // Masking bits off of a Short?  Loading a Character does some masking
  if (can_reshape &&
      load->outcnt() == 1 && load->unique_out() == this) {
    if (lop == Op_LoadS && (mask & 0xFFFF0000) == 0 ) {
      Node* ldus = load->as_Load()->convert_to_unsigned_load(*phase);
      ldus = phase->transform(ldus);
      return new AndINode(ldus, phase->intcon(mask & 0xFFFF));
    }

    // Masking sign bits off of a Byte?  Do an unsigned byte load plus
    // an and.
    if (lop == Op_LoadB && (mask & 0xFFFFFF00) == 0) {
      Node* ldub = load->as_Load()->convert_to_unsigned_load(*phase);
      ldub = phase->transform(ldub);
      return new AndINode(ldub, phase->intcon(mask));
    }
  }

  // Masking off sign bits?  Dont make them!
  if( lop == Op_RShiftI ) {
    const TypeInt *t12 = phase->type(load->in(2))->isa_int();
    if( t12 && t12->is_con() ) { // Shift is by a constant
      int shift = t12->get_con();
      shift &= BitsPerJavaInteger-1;  // semantics of Java shifts
      const int sign_bits_mask = ~right_n_bits(BitsPerJavaInteger - shift);
      // If the AND'ing of the 2 masks has no bits, then only original shifted
      // bits survive.  NO sign-extension bits survive the maskings.
      if( (sign_bits_mask & mask) == 0 ) {
        // Use zero-fill shift instead
        Node *zshift = phase->transform(new URShiftINode(load->in(1),load->in(2)));
        return new AndINode( zshift, in(2) );
      }
    }
  }

  // Check for 'negate/and-1', a pattern emitted when someone asks for
  // 'mod 2'.  Negate leaves the low order bit unchanged (think: complement
  // plus 1) and the mask is of the low order bit.  Skip the negate.
  if( lop == Op_SubI && mask == 1 && load->in(1) &&
      phase->type(load->in(1)) == TypeInt::ZERO )
    return new AndINode( load->in(2), in(2) );

  return MulNode::Ideal(phase, can_reshape);
}

//=============================================================================
//------------------------------mul_ring---------------------------------------
// Supplied function returns the product of the inputs IN THE CURRENT RING.
// For the logical operations the ring's MUL is really a logical AND function.
// This also type-checks the inputs for sanity.  Guaranteed never to
// be passed a TOP or BOTTOM type, these are filtered out by pre-check.
const Type *AndLNode::mul_ring( const Type *t0, const Type *t1 ) const {
  const TypeLong* r0 = t0->is_long();
  const TypeLong* r1 = t1->is_long();

  return and_value<TypeLong>(r0, r1);
}

const Type* AndLNode::Value(PhaseGVN* phase) const {
  if (AndIL_is_zero_element_under_mask(phase, in(1), in(2), T_LONG) ||
      AndIL_is_zero_element_under_mask(phase, in(2), in(1), T_LONG)) {
    return TypeLong::ZERO;
  }

  return MulNode::Value(phase);
}

//------------------------------Identity---------------------------------------
// Masking off the high bits of an unsigned load is not required
Node* AndLNode::Identity(PhaseGVN* phase) {

  // x & x => x
  if (in(1) == in(2)) {
    return in(1);
  }

  Node *usr = in(1);
  const TypeLong *t2 = phase->type( in(2) )->isa_long();
  if( t2 && t2->is_con() ) {
    jlong con = t2->get_con();
    // Masking off high bits which are always zero is useless.
    const TypeLong* t1 = phase->type( in(1) )->isa_long();
    if (t1 != nullptr && t1->_lo >= 0) {
      int bit_count = log2i_graceful(t1->_hi) + 1;
      jlong t1_support = jlong(max_julong >> (BitsPerJavaLong - bit_count));
      if ((t1_support & con) == t1_support)
        return usr;
    }
    uint lop = usr->Opcode();
    // Masking off the high bits of a unsigned-shift-right is not
    // needed either.
    if( lop == Op_URShiftL ) {
      const TypeInt *t12 = phase->type( usr->in(2) )->isa_int();
      if( t12 && t12->is_con() ) {  // Shift is by a constant
        int shift = t12->get_con();
        shift &= BitsPerJavaLong - 1;  // semantics of Java shifts
        jlong mask = max_julong >> shift;
        if( (mask&con) == mask )  // If AND is useless, skip it
          return usr;
      }
    }
  }
  return MulNode::Identity(phase);
}

//------------------------------Ideal------------------------------------------
Node *AndLNode::Ideal(PhaseGVN *phase, bool can_reshape) {
  // Simplify (v1 + v2) & mask to v1 & mask or v2 & mask when possible.
  Node* progress = AndIL_sum_and_mask(phase, T_LONG);
  if (progress != nullptr) {
    return progress;
  }

  // Convert "(~a) & (~b)" into "~(a | b)"
  if (AddNode::is_not(phase, in(1), T_LONG) && AddNode::is_not(phase, in(2), T_LONG)) {
    Node* or_a_b = new OrLNode(in(1)->in(1), in(2)->in(1));
    Node* tn = phase->transform(or_a_b);
    return AddNode::make_not(phase, tn, T_LONG);
  }

  // Special case constant AND mask
  const TypeLong *t2 = phase->type( in(2) )->isa_long();
  if( !t2 || !t2->is_con() ) return MulNode::Ideal(phase, can_reshape);
  const jlong mask = t2->get_con();

  Node* in1 = in(1);
  int op = in1->Opcode();

  // Are we masking a long that was converted from an int with a mask
  // that fits in 32-bits?  Commute them and use an AndINode.  Don't
  // convert masks which would cause a sign extension of the integer
  // value.  This check includes UI2L masks (0x00000000FFFFFFFF) which
  // would be optimized away later in Identity.
  if (op == Op_ConvI2L && (mask & UCONST64(0xFFFFFFFF80000000)) == 0) {
    Node* andi = new AndINode(in1->in(1), phase->intcon(mask));
    andi = phase->transform(andi);
    return new ConvI2LNode(andi);
  }

  // Masking off sign bits?  Dont make them!
  if (op == Op_RShiftL) {
    const TypeInt* t12 = phase->type(in1->in(2))->isa_int();
    if( t12 && t12->is_con() ) { // Shift is by a constant
      int shift = t12->get_con();
      shift &= BitsPerJavaLong - 1;  // semantics of Java shifts
      if (shift != 0) {
        const julong sign_bits_mask = ~(((julong)CONST64(1) << (julong)(BitsPerJavaLong - shift)) -1);
        // If the AND'ing of the 2 masks has no bits, then only original shifted
        // bits survive.  NO sign-extension bits survive the maskings.
        if( (sign_bits_mask & mask) == 0 ) {
          // Use zero-fill shift instead
          Node *zshift = phase->transform(new URShiftLNode(in1->in(1), in1->in(2)));
          return new AndLNode(zshift, in(2));
        }
      }
    }
  }

  return MulNode::Ideal(phase, can_reshape);
}

LShiftNode* LShiftNode::make(Node* in1, Node* in2, BasicType bt) {
  switch (bt) {
    case T_INT:
      return new LShiftINode(in1, in2);
    case T_LONG:
      return new LShiftLNode(in1, in2);
    default:
      fatal("Not implemented for %s", type2name(bt));
  }
  return nullptr;
}

// Returns whether the shift amount is constant. If so, sets count.
static bool const_shift_count(PhaseGVN* phase, const Node* shift_node, int* count) {
  const TypeInt* tcount = phase->type(shift_node->in(2))->isa_int();
  if (tcount != nullptr && tcount->is_con()) {
    *count = tcount->get_con();
    return true;
  }
  return false;
}

// Returns whether the shift amount is constant. If so, sets real_shift and masked_shift.
static bool mask_shift_amount(PhaseGVN* phase, const Node* shift_node, uint nBits, int& real_shift, int& masked_shift) {
  if (const_shift_count(phase, shift_node, &real_shift)) {
    masked_shift = real_shift & (nBits - 1);
    return true;
  }
  return false;
}

// Convenience for when we don't care about the real amount
static bool mask_shift_amount(PhaseGVN* phase, const Node* shift_node, uint nBits, int& masked_shift) {
  int real_shift;
  return mask_shift_amount(phase, shift_node, nBits, real_shift, masked_shift);
}

// Use this in ::Ideal only with shiftNode == this!
// Returns the masked shift amount if constant or 0 if not constant.
static int mask_and_replace_shift_amount(PhaseGVN* phase, Node* shift_node, uint nBits) {
  int real_shift;
  int masked_shift;
  if (mask_shift_amount(phase, shift_node, nBits, real_shift, masked_shift)) {
    if (masked_shift == 0) {
      // Let Identity() handle 0 shift count.
      return 0;
    }

    if (real_shift != masked_shift) {
      PhaseIterGVN* igvn = phase->is_IterGVN();
      if (igvn != nullptr) {
        igvn->_worklist.push(shift_node);
      }
      shift_node->set_req(2, phase->intcon(masked_shift)); // Replace shift count with masked value.
    }
    return masked_shift;
  }
  // Not a shift by a constant.
  return 0;
}

// Called with
//   outer_shift = (_ << rhs_outer)
// We are looking for the pattern:
//   outer_shift = ((X << rhs_inner) << rhs_outer)
//   where rhs_outer and rhs_inner are constant
//   we denote inner_shift the nested expression (X << rhs_inner)
//   con_inner = rhs_inner % nbits and con_outer = rhs_outer % nbits
//   where nbits is the number of bits of the shifts
//
// There are 2 cases:
// if con_outer + con_inner >= nbits => 0
// if con_outer + con_inner < nbits => X << (con_outer + con_inner)
static Node* collapse_nested_shift_left(PhaseGVN* phase, const Node* outer_shift, int con_outer, BasicType bt) {
  assert(bt == T_LONG || bt == T_INT, "Unexpected type");
  const Node* inner_shift = outer_shift->in(1);
  if (inner_shift->Opcode() != Op_LShift(bt)) {
    return nullptr;
  }

  int nbits = static_cast<int>(bits_per_java_integer(bt));
  int con_inner;
  if (!mask_shift_amount(phase, inner_shift, nbits, con_inner)) {
    return nullptr;
  }

  if (con_inner == 0) {
    // We let the Identity() of the inner shift do its job.
    return nullptr;
  }

  if (con_outer + con_inner >= nbits) {
    // While it might be tempting to use
    // phase->zerocon(bt);
    // it would be incorrect: zerocon caches nodes, while Ideal is only allowed
    // to return a new node, this or nullptr, but not an old (cached) node.
    return ConNode::make(TypeInteger::zero(bt));
  }

  // con0 + con1 < nbits ==> actual shift happens now
  Node* con0_plus_con1 = phase->intcon(con_outer + con_inner);
  return LShiftNode::make(inner_shift->in(1), con0_plus_con1, bt);
}

//------------------------------Identity---------------------------------------
Node* LShiftINode::Identity(PhaseGVN* phase) {
  int count = 0;
  if (const_shift_count(phase, this, &count) && (count & (BitsPerJavaInteger - 1)) == 0) {
    // Shift by a multiple of 32 does nothing
    return in(1);
  }
  return this;
}

//------------------------------Ideal------------------------------------------
// If the right input is a constant, and the left input is an add of a
// constant, flatten the tree: (X+con1)<<con0 ==> X<<con0 + con1<<con0
//
// Also collapse nested left-shifts with constant rhs:
// (X << con1) << con2 ==> X << (con1 + con2)
Node *LShiftINode::Ideal(PhaseGVN *phase, bool can_reshape) {
  int con = mask_and_replace_shift_amount(phase, this, BitsPerJavaInteger);
  if (con == 0) {
    return nullptr;
  }

  // Left input is an add?
  Node *add1 = in(1);
  int add1_op = add1->Opcode();
  if( add1_op == Op_AddI ) {    // Left input is an add?
    assert( add1 != add1->in(1), "dead loop in LShiftINode::Ideal" );

    // Transform is legal, but check for profit.  Avoid breaking 'i2s'
    // and 'i2b' patterns which typically fold into 'StoreC/StoreB'.
    if( con < 16 ) {
      // Left input is an add of the same number?
      if (add1->in(1) == add1->in(2)) {
        // Convert "(x + x) << c0" into "x << (c0 + 1)"
        // In general, this optimization cannot be applied for c0 == 31 since
        // 2x << 31 != x << 32 = x << 0 = x (e.g. x = 1: 2 << 31 = 0 != 1)
        return new LShiftINode(add1->in(1), phase->intcon(con + 1));
      }

      // Left input is an add of a constant?
      const TypeInt *t12 = phase->type(add1->in(2))->isa_int();
      if( t12 && t12->is_con() ){ // Left input is an add of a con?
        // Compute X << con0
        Node *lsh = phase->transform( new LShiftINode( add1->in(1), in(2) ) );
        // Compute X<<con0 + (con1<<con0)
        return new AddINode( lsh, phase->intcon(t12->get_con() << con));
      }
    }
  }

  // Check for "(x >> C1) << C2"
  if (add1_op == Op_RShiftI || add1_op == Op_URShiftI) {
    int add1Con = 0;
    const_shift_count(phase, add1, &add1Con);

    // Special case C1 == C2, which just masks off low bits
    if (add1Con > 0 && con == add1Con) {
      // Convert to "(x & -(1 << C2))"
      return new AndINode(add1->in(1), phase->intcon(java_negate(jint(1 << con))));
    } else {
      // Wait until the right shift has been sharpened to the correct count
      if (add1Con > 0 && add1Con < BitsPerJavaInteger) {
        // As loop parsing can produce LShiftI nodes, we should wait until the graph is fully formed
        // to apply optimizations, otherwise we can inadvertently stop vectorization opportunities.
        if (phase->is_IterGVN()) {
          if (con > add1Con) {
            // Creates "(x << (C2 - C1)) & -(1 << C2)"
            Node* lshift = phase->transform(new LShiftINode(add1->in(1), phase->intcon(con - add1Con)));
            return new AndINode(lshift, phase->intcon(java_negate(jint(1 << con))));
          } else {
            assert(con < add1Con, "must be (%d < %d)", con, add1Con);
            // Creates "(x >> (C1 - C2)) & -(1 << C2)"

            // Handle logical and arithmetic shifts
            Node* rshift;
            if (add1_op == Op_RShiftI) {
              rshift = phase->transform(new RShiftINode(add1->in(1), phase->intcon(add1Con - con)));
            } else {
              rshift = phase->transform(new URShiftINode(add1->in(1), phase->intcon(add1Con - con)));
            }

            return new AndINode(rshift, phase->intcon(java_negate(jint(1 << con))));
          }
        } else {
          phase->record_for_igvn(this);
        }
      }
    }
  }

  // Check for "((x >> C1) & Y) << C2"
  if (add1_op == Op_AndI) {
    Node *add2 = add1->in(1);
    int add2_op = add2->Opcode();
    if (add2_op == Op_RShiftI || add2_op == Op_URShiftI) {
      // Special case C1 == C2, which just masks off low bits
      if (add2->in(2) == in(2)) {
        // Convert to "(x & (Y << C2))"
        Node* y_sh = phase->transform(new LShiftINode(add1->in(2), phase->intcon(con)));
        return new AndINode(add2->in(1), y_sh);
      }

      int add2Con = 0;
      const_shift_count(phase, add2, &add2Con);
      if (add2Con > 0 && add2Con < BitsPerJavaInteger) {
        if (phase->is_IterGVN()) {
          // Convert to "((x >> C1) << C2) & (Y << C2)"

          // Make "(x >> C1) << C2", which will get folded away by the rule above
          Node* x_sh = phase->transform(new LShiftINode(add2, phase->intcon(con)));
          // Make "Y << C2", which will simplify when Y is a constant
          Node* y_sh = phase->transform(new LShiftINode(add1->in(2), phase->intcon(con)));

          return new AndINode(x_sh, y_sh);
        } else {
          phase->record_for_igvn(this);
        }
      }
    }
  }

  // Check for ((x & ((1<<(32-c0))-1)) << c0) which ANDs off high bits
  // before shifting them away.
  const jint bits_mask = right_n_bits(BitsPerJavaInteger-con);
  if( add1_op == Op_AndI &&
      phase->type(add1->in(2)) == TypeInt::make( bits_mask ) )
    return new LShiftINode( add1->in(1), in(2) );

  // Performs:
  // (X << con1) << con2 ==> X << (con1 + con2)
  Node* doubleShift = collapse_nested_shift_left(phase, this, con, T_INT);
  if (doubleShift != nullptr) {
    return doubleShift;
  }

  return nullptr;
}

//------------------------------Value------------------------------------------
// A LShiftINode shifts its input2 left by input1 amount.
const Type* LShiftINode::Value(PhaseGVN* phase) const {
  const Type *t1 = phase->type( in(1) );
  const Type *t2 = phase->type( in(2) );
  // Either input is TOP ==> the result is TOP
  if( t1 == Type::TOP ) return Type::TOP;
  if( t2 == Type::TOP ) return Type::TOP;

  // Left input is ZERO ==> the result is ZERO.
  if( t1 == TypeInt::ZERO ) return TypeInt::ZERO;
  // Shift by zero does nothing
  if( t2 == TypeInt::ZERO ) return t1;

  // Either input is BOTTOM ==> the result is BOTTOM
  if( (t1 == TypeInt::INT) || (t2 == TypeInt::INT) ||
      (t1 == Type::BOTTOM) || (t2 == Type::BOTTOM) )
    return TypeInt::INT;

  const TypeInt *r1 = t1->is_int(); // Handy access
  const TypeInt *r2 = t2->is_int(); // Handy access

  if (!r2->is_con())
    return TypeInt::INT;

  uint shift = r2->get_con();
  shift &= BitsPerJavaInteger-1;  // semantics of Java shifts
  // Shift by a multiple of 32 does nothing:
  if (shift == 0)  return t1;

  // If the shift is a constant, shift the bounds of the type,
  // unless this could lead to an overflow.
  if (!r1->is_con()) {
    jint lo = r1->_lo, hi = r1->_hi;
    if (((lo << shift) >> shift) == lo &&
        ((hi << shift) >> shift) == hi) {
      // No overflow.  The range shifts up cleanly.
      return TypeInt::make((jint)lo << (jint)shift,
                           (jint)hi << (jint)shift,
                           MAX2(r1->_widen,r2->_widen));
    }
    return TypeInt::INT;
  }

  return TypeInt::make( (jint)r1->get_con() << (jint)shift );
}

//=============================================================================
//------------------------------Identity---------------------------------------
Node* LShiftLNode::Identity(PhaseGVN* phase) {
  int count = 0;
  if (const_shift_count(phase, this, &count) && (count & (BitsPerJavaLong - 1)) == 0) {
    // Shift by a multiple of 64 does nothing
    return in(1);
  }
  return this;
}

//------------------------------Ideal------------------------------------------
// If the right input is a constant, and the left input is an add of a
// constant, flatten the tree: (X+con1)<<con0 ==> X<<con0 + con1<<con0
//
// Also collapse nested left-shifts with constant rhs:
// (X << con1) << con2 ==> X << (con1 + con2)
Node *LShiftLNode::Ideal(PhaseGVN *phase, bool can_reshape) {
  int con = mask_and_replace_shift_amount(phase, this, BitsPerJavaLong);
  if (con == 0) {
    return nullptr;
  }

  // Left input is an add?
  Node *add1 = in(1);
  int add1_op = add1->Opcode();
  if( add1_op == Op_AddL ) {    // Left input is an add?
    // Avoid dead data cycles from dead loops
    assert( add1 != add1->in(1), "dead loop in LShiftLNode::Ideal" );

    // Left input is an add of the same number?
    if (con != (BitsPerJavaLong - 1) && add1->in(1) == add1->in(2)) {
      // Convert "(x + x) << c0" into "x << (c0 + 1)"
      // Can only be applied if c0 != 63 because:
      // (x + x) << 63 = 2x << 63, while
      // (x + x) << 63 --transform--> x << 64 = x << 0 = x (!= 2x << 63, for example for x = 1)
      // According to the Java spec, chapter 15.19, we only consider the six lowest-order bits of the right-hand operand
      // (i.e. "right-hand operand" & 0b111111). Therefore, x << 64 is the same as x << 0 (64 = 0b10000000 & 0b0111111 = 0).
      return new LShiftLNode(add1->in(1), phase->intcon(con + 1));
    }

    // Left input is an add of a constant?
    const TypeLong *t12 = phase->type(add1->in(2))->isa_long();
    if( t12 && t12->is_con() ){ // Left input is an add of a con?
      // Compute X << con0
      Node *lsh = phase->transform( new LShiftLNode( add1->in(1), in(2) ) );
      // Compute X<<con0 + (con1<<con0)
      return new AddLNode( lsh, phase->longcon(t12->get_con() << con));
    }
  }

  // Check for "(x >> C1) << C2"
  if (add1_op == Op_RShiftL || add1_op == Op_URShiftL) {
    int add1Con = 0;
    const_shift_count(phase, add1, &add1Con);

    // Special case C1 == C2, which just masks off low bits
    if (add1Con > 0 && con == add1Con) {
      // Convert to "(x & -(1 << C2))"
      return new AndLNode(add1->in(1), phase->longcon(java_negate(jlong(CONST64(1) << con))));
    } else {
      // Wait until the right shift has been sharpened to the correct count
      if (add1Con > 0 && add1Con < BitsPerJavaLong) {
        // As loop parsing can produce LShiftI nodes, we should wait until the graph is fully formed
        // to apply optimizations, otherwise we can inadvertently stop vectorization opportunities.
        if (phase->is_IterGVN()) {
          if (con > add1Con) {
            // Creates "(x << (C2 - C1)) & -(1 << C2)"
            Node* lshift = phase->transform(new LShiftLNode(add1->in(1), phase->intcon(con - add1Con)));
            return new AndLNode(lshift, phase->longcon(java_negate(jlong(CONST64(1) << con))));
          } else {
            assert(con < add1Con, "must be (%d < %d)", con, add1Con);
            // Creates "(x >> (C1 - C2)) & -(1 << C2)"

            // Handle logical and arithmetic shifts
            Node* rshift;
            if (add1_op == Op_RShiftL) {
              rshift = phase->transform(new RShiftLNode(add1->in(1), phase->intcon(add1Con - con)));
            } else {
              rshift = phase->transform(new URShiftLNode(add1->in(1), phase->intcon(add1Con - con)));
            }

            return new AndLNode(rshift, phase->longcon(java_negate(jlong(CONST64(1) << con))));
          }
        } else {
          phase->record_for_igvn(this);
        }
      }
    }
  }

  // Check for "((x >> C1) & Y) << C2"
  if (add1_op == Op_AndL) {
    Node* add2 = add1->in(1);
    int add2_op = add2->Opcode();
    if (add2_op == Op_RShiftL || add2_op == Op_URShiftL) {
      // Special case C1 == C2, which just masks off low bits
      if (add2->in(2) == in(2)) {
        // Convert to "(x & (Y << C2))"
        Node* y_sh = phase->transform(new LShiftLNode(add1->in(2), phase->intcon(con)));
        return new AndLNode(add2->in(1), y_sh);
      }

      int add2Con = 0;
      const_shift_count(phase, add2, &add2Con);
      if (add2Con > 0 && add2Con < BitsPerJavaLong) {
        if (phase->is_IterGVN()) {
          // Convert to "((x >> C1) << C2) & (Y << C2)"

          // Make "(x >> C1) << C2", which will get folded away by the rule above
          Node* x_sh = phase->transform(new LShiftLNode(add2, phase->intcon(con)));
          // Make "Y << C2", which will simplify when Y is a constant
          Node* y_sh = phase->transform(new LShiftLNode(add1->in(2), phase->intcon(con)));

          return new AndLNode(x_sh, y_sh);
        } else {
          phase->record_for_igvn(this);
        }
      }
    }
  }

  // Check for ((x & ((CONST64(1)<<(64-c0))-1)) << c0) which ANDs off high bits
  // before shifting them away.
  const jlong bits_mask = jlong(max_julong >> con);
  if( add1_op == Op_AndL &&
      phase->type(add1->in(2)) == TypeLong::make( bits_mask ) )
    return new LShiftLNode( add1->in(1), in(2) );

  // Performs:
  // (X << con1) << con2 ==> X << (con1 + con2)
  Node* doubleShift = collapse_nested_shift_left(phase, this, con, T_LONG);
  if (doubleShift != nullptr) {
    return doubleShift;
  }

  return nullptr;
}

//------------------------------Value------------------------------------------
// A LShiftLNode shifts its input2 left by input1 amount.
const Type* LShiftLNode::Value(PhaseGVN* phase) const {
  const Type *t1 = phase->type( in(1) );
  const Type *t2 = phase->type( in(2) );
  // Either input is TOP ==> the result is TOP
  if( t1 == Type::TOP ) return Type::TOP;
  if( t2 == Type::TOP ) return Type::TOP;

  // Left input is ZERO ==> the result is ZERO.
  if( t1 == TypeLong::ZERO ) return TypeLong::ZERO;
  // Shift by zero does nothing
  if( t2 == TypeInt::ZERO ) return t1;

  // Either input is BOTTOM ==> the result is BOTTOM
  if( (t1 == TypeLong::LONG) || (t2 == TypeInt::INT) ||
      (t1 == Type::BOTTOM) || (t2 == Type::BOTTOM) )
    return TypeLong::LONG;

  const TypeLong *r1 = t1->is_long(); // Handy access
  const TypeInt  *r2 = t2->is_int();  // Handy access

  if (!r2->is_con())
    return TypeLong::LONG;

  uint shift = r2->get_con();
  shift &= BitsPerJavaLong - 1;  // semantics of Java shifts
  // Shift by a multiple of 64 does nothing:
  if (shift == 0)  return t1;

  // If the shift is a constant, shift the bounds of the type,
  // unless this could lead to an overflow.
  if (!r1->is_con()) {
    jlong lo = r1->_lo, hi = r1->_hi;
    if (((lo << shift) >> shift) == lo &&
        ((hi << shift) >> shift) == hi) {
      // No overflow.  The range shifts up cleanly.
      return TypeLong::make((jlong)lo << (jint)shift,
                            (jlong)hi << (jint)shift,
                            MAX2(r1->_widen,r2->_widen));
    }
    return TypeLong::LONG;
  }

  return TypeLong::make( (jlong)r1->get_con() << (jint)shift );
}

RShiftNode* RShiftNode::make(Node* in1, Node* in2, BasicType bt) {
  switch (bt) {
    case T_INT:
      return new RShiftINode(in1, in2);
    case T_LONG:
      return new RShiftLNode(in1, in2);
    default:
      fatal("Not implemented for %s", type2name(bt));
  }
  return nullptr;
}


//=============================================================================
//------------------------------Identity---------------------------------------
Node* RShiftNode::IdentityIL(PhaseGVN* phase, BasicType bt) {
  int count = 0;
  if (const_shift_count(phase, this, &count)) {
    if ((count & (bits_per_java_integer(bt) - 1)) == 0) {
      // Shift by a multiple of 32/64 does nothing
      return in(1);
    }
    // Check for useless sign-masking
    if (in(1)->Opcode() == Op_LShift(bt) &&
        in(1)->req() == 3 &&
        in(1)->in(2) == in(2)) {
      count &= bits_per_java_integer(bt) - 1; // semantics of Java shifts
      // Compute masks for which this shifting doesn't change
      jlong lo = (CONST64(-1) << (bits_per_java_integer(bt) - ((uint)count)-1)); // FFFF8000
      jlong hi = ~lo;                                                            // 00007FFF
      const TypeInteger* t11 = phase->type(in(1)->in(1))->isa_integer(bt);
      if (t11 == nullptr) {
        return this;
      }
      // Does actual value fit inside of mask?
      if (lo <= t11->lo_as_long() && t11->hi_as_long() <= hi) {
        return in(1)->in(1);      // Then shifting is a nop
      }
    }
  }
  return this;
}

Node* RShiftINode::Identity(PhaseGVN* phase) {
  return IdentityIL(phase, T_INT);
}

Node* RShiftNode::IdealIL(PhaseGVN* phase, bool can_reshape, BasicType bt) {
  // Inputs may be TOP if they are dead.
  const TypeInteger* t1 = phase->type(in(1))->isa_integer(bt);
  if (t1 == nullptr) {
    return NodeSentinel;        // Left input is an integer
  }
  int shift = mask_and_replace_shift_amount(phase, this, bits_per_java_integer(bt));
  if (shift == 0) {
    return NodeSentinel;
  }

  // Check for (x & 0xFF000000) >> 24, whose mask can be made smaller.
  // and convert to (x >> 24) & (0xFF000000 >> 24) = x >> 24
  // Such expressions arise normally from shift chains like (byte)(x >> 24).
  const Node* and_node = in(1);
  if (and_node->Opcode() != Op_And(bt)) {
    return nullptr;
  }
  const TypeInteger* mask_t = phase->type(and_node->in(2))->isa_integer(bt);
  if (mask_t != nullptr && mask_t->is_con()) {
    jlong maskbits = mask_t->get_con_as_long(bt);
    // Convert to "(x >> shift) & (mask >> shift)"
    Node* shr_nomask = phase->transform(RShiftNode::make(and_node->in(1), in(2), bt));
    return MulNode::make_and(shr_nomask, phase->integercon(maskbits >> shift, bt), bt);
  }
  return nullptr;
}

Node* RShiftINode::Ideal(PhaseGVN* phase, bool can_reshape) {
  Node* progress = IdealIL(phase, can_reshape, T_INT);
  if (progress == NodeSentinel) {
    return nullptr;
  }
  if (progress != nullptr) {
    return progress;
  }
  int shift = mask_and_replace_shift_amount(phase, this, BitsPerJavaInteger);
  assert(shift != 0, "handled by IdealIL");

  // Check for "(short[i] <<16)>>16" which simply sign-extends
  const Node *shl = in(1);
  if (shl->Opcode() != Op_LShiftI) {
    return nullptr;
  }

  const TypeInt* left_shift_t = phase->type(shl->in(2))->isa_int();
  if (left_shift_t == nullptr) {
    return nullptr;
  }
  if (shift == 16 && left_shift_t->is_con(16)) {
    Node *ld = shl->in(1);
    if (ld->Opcode() == Op_LoadS) {
      // Sign extension is just useless here.  Return a RShiftI of zero instead
      // returning 'ld' directly.  We cannot return an old Node directly as
      // that is the job of 'Identity' calls and Identity calls only work on
      // direct inputs ('ld' is an extra Node removed from 'this').  The
      // combined optimization requires Identity only return direct inputs.
      set_req_X(1, ld, phase);
      set_req_X(2, phase->intcon(0), phase);
      return this;
    }
    else if (can_reshape &&
             ld->Opcode() == Op_LoadUS &&
             ld->outcnt() == 1 && ld->unique_out() == shl)
      // Replace zero-extension-load with sign-extension-load
      return ld->as_Load()->convert_to_signed_load(*phase);
  }

  // Check for "(byte[i] <<24)>>24" which simply sign-extends
  if (shift == 24 && left_shift_t->is_con(24)) {
    Node *ld = shl->in(1);
    if (ld->Opcode() == Op_LoadB) {
      // Sign extension is just useless here
      set_req_X(1, ld, phase);
      set_req_X(2, phase->intcon(0), phase);
      return this;
    }
  }

  return nullptr;
}

const Type* RShiftNode::ValueIL(PhaseGVN* phase, BasicType bt) const {
  const Type* t1 = phase->type(in(1));
  const Type* t2 = phase->type(in(2));
  // Either input is TOP ==> the result is TOP
  if (t1 == Type::TOP) {
    return Type::TOP;
  }
  if (t2 == Type::TOP) {
    return Type::TOP;
  }

  // Left input is ZERO ==> the result is ZERO.
  if (t1 == TypeInteger::zero(bt)) {
    return TypeInteger::zero(bt);
  }
  // Shift by zero does nothing
  if (t2 == TypeInt::ZERO) {
    return t1;
  }

  // Either input is BOTTOM ==> the result is BOTTOM
  if (t1 == Type::BOTTOM || t2 == Type::BOTTOM) {
    return TypeInteger::bottom(bt);
  }

  const TypeInteger* r1 = t1->isa_integer(bt);
  const TypeInt* r2 = t2->isa_int();

  // If the shift is a constant, just shift the bounds of the type.
  // For example, if the shift is 31/63, we just propagate sign bits.
  if (!r1->is_con() && r2->is_con()) {
    uint shift = r2->get_con();
    shift &= bits_per_java_integer(bt) - 1;  // semantics of Java shifts
    // Shift by a multiple of 32/64 does nothing:
    if (shift == 0) {
      return t1;
    }
    // Calculate reasonably aggressive bounds for the result.
    // This is necessary if we are to correctly type things
    // like (x<<24>>24) == ((byte)x).
    jlong lo = r1->lo_as_long() >> (jint)shift;
    jlong hi = r1->hi_as_long() >> (jint)shift;
    assert(lo <= hi, "must have valid bounds");
#ifdef ASSERT
   if (bt == T_INT) {
     jint lo_verify = checked_cast<jint>(r1->lo_as_long()) >> (jint)shift;
     jint hi_verify = checked_cast<jint>(r1->hi_as_long()) >> (jint)shift;
     assert((checked_cast<jint>(lo) == lo_verify) && (checked_cast<jint>(hi) == hi_verify), "inconsistent");
   }
#endif
    const TypeInteger* ti = TypeInteger::make(lo, hi, MAX2(r1->_widen,r2->_widen), bt);
#ifdef ASSERT
    // Make sure we get the sign-capture idiom correct.
    if (shift == bits_per_java_integer(bt) - 1) {
      if (r1->lo_as_long() >= 0) {
        assert(ti == TypeInteger::zero(bt),    ">>31/63 of + is  0");
      }
      if (r1->hi_as_long() <  0) {
        assert(ti == TypeInteger::minus_1(bt), ">>31/63 of - is -1");
      }
    }
#endif
    return ti;
  }

  if (!r1->is_con() || !r2->is_con()) {
    // If the left input is non-negative the result must also be non-negative, regardless of what the right input is.
    if (r1->lo_as_long() >= 0) {
      return TypeInteger::make(0, r1->hi_as_long(), MAX2(r1->_widen, r2->_widen), bt);
    }

    // Conversely, if the left input is negative then the result must be negative.
    if (r1->hi_as_long() <= -1) {
      return TypeInteger::make(r1->lo_as_long(), -1, MAX2(r1->_widen, r2->_widen), bt);
    }

    return TypeInteger::bottom(bt);
  }

  // Signed shift right
  return TypeInteger::make(r1->get_con_as_long(bt) >> (r2->get_con() & (bits_per_java_integer(bt) - 1)), bt);
}

const Type* RShiftINode::Value(PhaseGVN* phase) const {
  return ValueIL(phase, T_INT);
}

//=============================================================================
//------------------------------Identity---------------------------------------
Node* RShiftLNode::Identity(PhaseGVN* phase) {
  return IdentityIL(phase, T_LONG);
}

Node* RShiftLNode::Ideal(PhaseGVN *phase, bool can_reshape) {
  Node* progress = IdealIL(phase, can_reshape, T_LONG);
  if (progress == NodeSentinel) {
    return nullptr;
  }
  return progress;
}

const Type* RShiftLNode::Value(PhaseGVN* phase) const {
  return ValueIL(phase, T_LONG);
}

//=============================================================================
//------------------------------Identity---------------------------------------
Node* URShiftINode::Identity(PhaseGVN* phase) {
  int count = 0;
  if (const_shift_count(phase, this, &count) && (count & (BitsPerJavaInteger - 1)) == 0) {
    // Shift by a multiple of 32 does nothing
    return in(1);
  }

  // Check for "((x << LogBytesPerWord) + (wordSize-1)) >> LogBytesPerWord" which is just "x".
  // Happens during new-array length computation.
  // Safe if 'x' is in the range [0..(max_int>>LogBytesPerWord)]
  Node *add = in(1);
  if (add->Opcode() == Op_AddI) {
    const TypeInt *t2 = phase->type(add->in(2))->isa_int();
    if (t2 && t2->is_con(wordSize - 1) &&
        add->in(1)->Opcode() == Op_LShiftI) {
      // Check that shift_counts are LogBytesPerWord.
      Node          *lshift_count   = add->in(1)->in(2);
      const TypeInt *t_lshift_count = phase->type(lshift_count)->isa_int();
      if (t_lshift_count && t_lshift_count->is_con(LogBytesPerWord) &&
          t_lshift_count == phase->type(in(2))) {
        Node          *x   = add->in(1)->in(1);
        const TypeInt *t_x = phase->type(x)->isa_int();
        if (t_x != nullptr && 0 <= t_x->_lo && t_x->_hi <= (max_jint>>LogBytesPerWord)) {
          return x;
        }
      }
    }
  }

  return (phase->type(in(2))->higher_equal(TypeInt::ZERO)) ? in(1) : this;
}

//------------------------------Ideal------------------------------------------
Node *URShiftINode::Ideal(PhaseGVN *phase, bool can_reshape) {
  int con = mask_and_replace_shift_amount(phase, this, BitsPerJavaInteger);
  if (con == 0) {
    return nullptr;
  }

  // We'll be wanting the right-shift amount as a mask of that many bits
  const int mask = right_n_bits(BitsPerJavaInteger - con);

  int in1_op = in(1)->Opcode();

  // Check for ((x>>>a)>>>b) and replace with (x>>>(a+b)) when a+b < 32
  if( in1_op == Op_URShiftI ) {
    const TypeInt *t12 = phase->type( in(1)->in(2) )->isa_int();
    if( t12 && t12->is_con() ) { // Right input is a constant
      assert( in(1) != in(1)->in(1), "dead loop in URShiftINode::Ideal" );
      const int con2 = t12->get_con() & 31; // Shift count is always masked
      const int con3 = con+con2;
      if( con3 < 32 )           // Only merge shifts if total is < 32
        return new URShiftINode( in(1)->in(1), phase->intcon(con3) );
    }
  }

  // Check for ((x << z) + Y) >>> z.  Replace with x + con>>>z
  // The idiom for rounding to a power of 2 is "(Q+(2^z-1)) >>> z".
  // If Q is "X << z" the rounding is useless.  Look for patterns like
  // ((X<<Z) + Y) >>> Z  and replace with (X + Y>>>Z) & Z-mask.
  Node *add = in(1);
  const TypeInt *t2 = phase->type(in(2))->isa_int();
  if (in1_op == Op_AddI) {
    Node *lshl = add->in(1);
    if( lshl->Opcode() == Op_LShiftI &&
        phase->type(lshl->in(2)) == t2 ) {
      Node *y_z = phase->transform( new URShiftINode(add->in(2),in(2)) );
      Node *sum = phase->transform( new AddINode( lshl->in(1), y_z ) );
      return new AndINode( sum, phase->intcon(mask) );
    }
  }

  // Check for (x & mask) >>> z.  Replace with (x >>> z) & (mask >>> z)
  // This shortens the mask.  Also, if we are extracting a high byte and
  // storing it to a buffer, the mask will be removed completely.
  Node *andi = in(1);
  if( in1_op == Op_AndI ) {
    const TypeInt *t3 = phase->type( andi->in(2) )->isa_int();
    if( t3 && t3->is_con() ) { // Right input is a constant
      jint mask2 = t3->get_con();
      mask2 >>= con;  // *signed* shift downward (high-order zeroes do not help)
      Node *newshr = phase->transform( new URShiftINode(andi->in(1), in(2)) );
      return new AndINode(newshr, phase->intcon(mask2));
      // The negative values are easier to materialize than positive ones.
      // A typical case from address arithmetic is ((x & ~15) >> 4).
      // It's better to change that to ((x >> 4) & ~0) versus
      // ((x >> 4) & 0x0FFFFFFF).  The difference is greatest in LP64.
    }
  }

  // Check for "(X << z ) >>> z" which simply zero-extends
  Node *shl = in(1);
  if( in1_op == Op_LShiftI &&
      phase->type(shl->in(2)) == t2 )
    return new AndINode( shl->in(1), phase->intcon(mask) );

  // Check for (x >> n) >>> 31. Replace with (x >>> 31)
  Node *shr = in(1);
  if ( in1_op == Op_RShiftI ) {
    Node *in11 = shr->in(1);
    Node *in12 = shr->in(2);
    const TypeInt *t11 = phase->type(in11)->isa_int();
    const TypeInt *t12 = phase->type(in12)->isa_int();
    if ( t11 && t2 && t2->is_con(31) && t12 && t12->is_con() ) {
      return new URShiftINode(in11, phase->intcon(31));
    }
  }

  return nullptr;
}

//------------------------------Value------------------------------------------
// A URShiftINode shifts its input2 right by input1 amount.
const Type* URShiftINode::Value(PhaseGVN* phase) const {
  // (This is a near clone of RShiftINode::Value.)
  const Type *t1 = phase->type( in(1) );
  const Type *t2 = phase->type( in(2) );
  // Either input is TOP ==> the result is TOP
  if( t1 == Type::TOP ) return Type::TOP;
  if( t2 == Type::TOP ) return Type::TOP;

  // Left input is ZERO ==> the result is ZERO.
  if( t1 == TypeInt::ZERO ) return TypeInt::ZERO;
  // Shift by zero does nothing
  if( t2 == TypeInt::ZERO ) return t1;

  // Either input is BOTTOM ==> the result is BOTTOM
  if (t1 == Type::BOTTOM || t2 == Type::BOTTOM)
    return TypeInt::INT;

  if (t2 == TypeInt::INT)
    return TypeInt::INT;

  const TypeInt *r1 = t1->is_int();     // Handy access
  const TypeInt *r2 = t2->is_int();     // Handy access

  if (r2->is_con()) {
    uint shift = r2->get_con();
    shift &= BitsPerJavaInteger-1;  // semantics of Java shifts
    // Shift by a multiple of 32 does nothing:
    if (shift == 0)  return t1;
    // Calculate reasonably aggressive bounds for the result.
    jint lo = (juint)r1->_lo >> (juint)shift;
    jint hi = (juint)r1->_hi >> (juint)shift;
    if (r1->_hi >= 0 && r1->_lo < 0) {
      // If the type has both negative and positive values,
      // there are two separate sub-domains to worry about:
      // The positive half and the negative half.
      jint neg_lo = lo;
      jint neg_hi = (juint)-1 >> (juint)shift;
      jint pos_lo = (juint) 0 >> (juint)shift;
      jint pos_hi = hi;
      lo = MIN2(neg_lo, pos_lo);  // == 0
      hi = MAX2(neg_hi, pos_hi);  // == -1 >>> shift;
    }
    assert(lo <= hi, "must have valid bounds");
    const TypeInt* ti = TypeInt::make(lo, hi, MAX2(r1->_widen,r2->_widen));
    #ifdef ASSERT
    // Make sure we get the sign-capture idiom correct.
    if (shift == BitsPerJavaInteger-1) {
      if (r1->_lo >= 0) assert(ti == TypeInt::ZERO, ">>>31 of + is 0");
      if (r1->_hi < 0)  assert(ti == TypeInt::ONE,  ">>>31 of - is +1");
    }
    #endif
    return ti;
  }

  //
  // Do not support shifted oops in info for GC
  //
  // else if( t1->base() == Type::InstPtr ) {
  //
  //   const TypeInstPtr *o = t1->is_instptr();
  //   if( t1->singleton() )
  //     return TypeInt::make( ((uint32_t)o->const_oop() + o->_offset) >> shift );
  // }
  // else if( t1->base() == Type::KlassPtr ) {
  //   const TypeKlassPtr *o = t1->is_klassptr();
  //   if( t1->singleton() )
  //     return TypeInt::make( ((uint32_t)o->const_oop() + o->_offset) >> shift );
  // }

  return TypeInt::INT;
}

//=============================================================================
//------------------------------Identity---------------------------------------
Node* URShiftLNode::Identity(PhaseGVN* phase) {
  int count = 0;
  if (const_shift_count(phase, this, &count) && (count & (BitsPerJavaLong - 1)) == 0) {
    // Shift by a multiple of 64 does nothing
    return in(1);
  }
  return this;
}

//------------------------------Ideal------------------------------------------
Node *URShiftLNode::Ideal(PhaseGVN *phase, bool can_reshape) {
  int con = mask_and_replace_shift_amount(phase, this, BitsPerJavaLong);
  if (con == 0) {
    return nullptr;
  }

  // We'll be wanting the right-shift amount as a mask of that many bits
  const jlong mask = jlong(max_julong >> con);

  // Check for ((x << z) + Y) >>> z.  Replace with x + con>>>z
  // The idiom for rounding to a power of 2 is "(Q+(2^z-1)) >>> z".
  // If Q is "X << z" the rounding is useless.  Look for patterns like
  // ((X<<Z) + Y) >>> Z  and replace with (X + Y>>>Z) & Z-mask.
  Node *add = in(1);
  const TypeInt *t2 = phase->type(in(2))->isa_int();
  if (add->Opcode() == Op_AddL) {
    Node *lshl = add->in(1);
    if( lshl->Opcode() == Op_LShiftL &&
        phase->type(lshl->in(2)) == t2 ) {
      Node *y_z = phase->transform( new URShiftLNode(add->in(2),in(2)) );
      Node *sum = phase->transform( new AddLNode( lshl->in(1), y_z ) );
      return new AndLNode( sum, phase->longcon(mask) );
    }
  }

  // Check for (x & mask) >>> z.  Replace with (x >>> z) & (mask >>> z)
  // This shortens the mask.  Also, if we are extracting a high byte and
  // storing it to a buffer, the mask will be removed completely.
  Node *andi = in(1);
  if( andi->Opcode() == Op_AndL ) {
    const TypeLong *t3 = phase->type( andi->in(2) )->isa_long();
    if( t3 && t3->is_con() ) { // Right input is a constant
      jlong mask2 = t3->get_con();
      mask2 >>= con;  // *signed* shift downward (high-order zeroes do not help)
      Node *newshr = phase->transform( new URShiftLNode(andi->in(1), in(2)) );
      return new AndLNode(newshr, phase->longcon(mask2));
    }
  }

  // Check for "(X << z ) >>> z" which simply zero-extends
  Node *shl = in(1);
  if( shl->Opcode() == Op_LShiftL &&
      phase->type(shl->in(2)) == t2 )
    return new AndLNode( shl->in(1), phase->longcon(mask) );

  // Check for (x >> n) >>> 63. Replace with (x >>> 63)
  Node *shr = in(1);
  if ( shr->Opcode() == Op_RShiftL ) {
    Node *in11 = shr->in(1);
    Node *in12 = shr->in(2);
    const TypeLong *t11 = phase->type(in11)->isa_long();
    const TypeInt *t12 = phase->type(in12)->isa_int();
    if ( t11 && t2 && t2->is_con(63) && t12 && t12->is_con() ) {
      return new URShiftLNode(in11, phase->intcon(63));
    }
  }
  return nullptr;
}

//------------------------------Value------------------------------------------
// A URShiftINode shifts its input2 right by input1 amount.
const Type* URShiftLNode::Value(PhaseGVN* phase) const {
  // (This is a near clone of RShiftLNode::Value.)
  const Type *t1 = phase->type( in(1) );
  const Type *t2 = phase->type( in(2) );
  // Either input is TOP ==> the result is TOP
  if( t1 == Type::TOP ) return Type::TOP;
  if( t2 == Type::TOP ) return Type::TOP;

  // Left input is ZERO ==> the result is ZERO.
  if( t1 == TypeLong::ZERO ) return TypeLong::ZERO;
  // Shift by zero does nothing
  if( t2 == TypeInt::ZERO ) return t1;

  // Either input is BOTTOM ==> the result is BOTTOM
  if (t1 == Type::BOTTOM || t2 == Type::BOTTOM)
    return TypeLong::LONG;

  if (t2 == TypeInt::INT)
    return TypeLong::LONG;

  const TypeLong *r1 = t1->is_long(); // Handy access
  const TypeInt  *r2 = t2->is_int (); // Handy access

  if (r2->is_con()) {
    uint shift = r2->get_con();
    shift &= BitsPerJavaLong - 1;  // semantics of Java shifts
    // Shift by a multiple of 64 does nothing:
    if (shift == 0)  return t1;
    // Calculate reasonably aggressive bounds for the result.
    jlong lo = (julong)r1->_lo >> (juint)shift;
    jlong hi = (julong)r1->_hi >> (juint)shift;
    if (r1->_hi >= 0 && r1->_lo < 0) {
      // If the type has both negative and positive values,
      // there are two separate sub-domains to worry about:
      // The positive half and the negative half.
      jlong neg_lo = lo;
      jlong neg_hi = (julong)-1 >> (juint)shift;
      jlong pos_lo = (julong) 0 >> (juint)shift;
      jlong pos_hi = hi;
      //lo = MIN2(neg_lo, pos_lo);  // == 0
      lo = neg_lo < pos_lo ? neg_lo : pos_lo;
      //hi = MAX2(neg_hi, pos_hi);  // == -1 >>> shift;
      hi = neg_hi > pos_hi ? neg_hi : pos_hi;
    }
    assert(lo <= hi, "must have valid bounds");
    const TypeLong* tl = TypeLong::make(lo, hi, MAX2(r1->_widen,r2->_widen));
    #ifdef ASSERT
    // Make sure we get the sign-capture idiom correct.
    if (shift == BitsPerJavaLong - 1) {
      if (r1->_lo >= 0) assert(tl == TypeLong::ZERO, ">>>63 of + is 0");
      if (r1->_hi < 0)  assert(tl == TypeLong::ONE,  ">>>63 of - is +1");
    }
    #endif
    return tl;
  }

  return TypeLong::LONG;                // Give up
}

//=============================================================================
//------------------------------Ideal------------------------------------------
Node* FmaNode::Ideal(PhaseGVN* phase, bool can_reshape) {
  // We canonicalize the node by converting "(-a)*b+c" into "b*(-a)+c"
  // This reduces the number of rules in the matcher, as we only need to check
  // for negations on the second argument, and not the symmetric case where
  // the first argument is negated.
  if (in(1)->is_Neg() && !in(2)->is_Neg()) {
    swap_edges(1, 2);
    return this;
  }
  return nullptr;
}

//=============================================================================
//------------------------------Value------------------------------------------
const Type* FmaDNode::Value(PhaseGVN* phase) const {
  const Type *t1 = phase->type(in(1));
  if (t1 == Type::TOP) return Type::TOP;
  if (t1->base() != Type::DoubleCon) return Type::DOUBLE;
  const Type *t2 = phase->type(in(2));
  if (t2 == Type::TOP) return Type::TOP;
  if (t2->base() != Type::DoubleCon) return Type::DOUBLE;
  const Type *t3 = phase->type(in(3));
  if (t3 == Type::TOP) return Type::TOP;
  if (t3->base() != Type::DoubleCon) return Type::DOUBLE;
#ifndef __STDC_IEC_559__
  return Type::DOUBLE;
#else
  double d1 = t1->getd();
  double d2 = t2->getd();
  double d3 = t3->getd();
  return TypeD::make(fma(d1, d2, d3));
#endif
}

//=============================================================================
//------------------------------Value------------------------------------------
const Type* FmaFNode::Value(PhaseGVN* phase) const {
  const Type *t1 = phase->type(in(1));
  if (t1 == Type::TOP) return Type::TOP;
  if (t1->base() != Type::FloatCon) return Type::FLOAT;
  const Type *t2 = phase->type(in(2));
  if (t2 == Type::TOP) return Type::TOP;
  if (t2->base() != Type::FloatCon) return Type::FLOAT;
  const Type *t3 = phase->type(in(3));
  if (t3 == Type::TOP) return Type::TOP;
  if (t3->base() != Type::FloatCon) return Type::FLOAT;
#ifndef __STDC_IEC_559__
  return Type::FLOAT;
#else
  float f1 = t1->getf();
  float f2 = t2->getf();
  float f3 = t3->getf();
  return TypeF::make(fma(f1, f2, f3));
#endif
}

//=============================================================================
//------------------------------Value------------------------------------------
const Type* FmaHFNode::Value(PhaseGVN* phase) const {
  const Type* t1 = phase->type(in(1));
  if (t1 == Type::TOP) { return Type::TOP; }
  if (t1->base() != Type::HalfFloatCon) { return Type::HALF_FLOAT; }
  const Type* t2 = phase->type(in(2));
  if (t2 == Type::TOP) { return Type::TOP; }
  if (t2->base() != Type::HalfFloatCon) { return Type::HALF_FLOAT; }
  const Type* t3 = phase->type(in(3));
  if (t3 == Type::TOP) { return Type::TOP; }
  if (t3->base() != Type::HalfFloatCon) { return Type::HALF_FLOAT; }
#ifndef __STDC_IEC_559__
  return Type::HALF_FLOAT;
#else
  float f1 = t1->getf();
  float f2 = t2->getf();
  float f3 = t3->getf();
  return TypeH::make(fma(f1, f2, f3));
#endif
}

//=============================================================================
//------------------------------hash-------------------------------------------
// Hash function for MulAddS2INode.  Operation is commutative with commutative pairs.
// The hash function must return the same value when edge swapping is performed.
uint MulAddS2INode::hash() const {
  return (uintptr_t)in(1) + (uintptr_t)in(2) + (uintptr_t)in(3) + (uintptr_t)in(4) + Opcode();
}

//------------------------------Rotate Operations ------------------------------

Node* RotateLeftNode::Identity(PhaseGVN* phase) {
  const Type* t1 = phase->type(in(1));
  if (t1 == Type::TOP) {
    return this;
  }
  int count = 0;
  assert(t1->isa_int() || t1->isa_long(), "Unexpected type");
  int mask = (t1->isa_int() ? BitsPerJavaInteger : BitsPerJavaLong) - 1;
  if (const_shift_count(phase, this, &count) && (count & mask) == 0) {
    // Rotate by a multiple of 32/64 does nothing
    return in(1);
  }
  return this;
}

const Type* RotateLeftNode::Value(PhaseGVN* phase) const {
  const Type* t1 = phase->type(in(1));
  const Type* t2 = phase->type(in(2));
  // Either input is TOP ==> the result is TOP
  if (t1 == Type::TOP || t2 == Type::TOP) {
    return Type::TOP;
  }

  if (t1->isa_int()) {
    const TypeInt* r1 = t1->is_int();
    const TypeInt* r2 = t2->is_int();

    // Left input is ZERO ==> the result is ZERO.
    if (r1 == TypeInt::ZERO) {
      return TypeInt::ZERO;
    }
    // Rotate by zero does nothing
    if (r2 == TypeInt::ZERO) {
      return r1;
    }
    if (r1->is_con() && r2->is_con()) {
      juint r1_con = (juint)r1->get_con();
      juint shift = (juint)(r2->get_con()) & (juint)(BitsPerJavaInteger - 1); // semantics of Java shifts
      return TypeInt::make((r1_con << shift) | (r1_con >> (32 - shift)));
    }
    return TypeInt::INT;
  } else {
    assert(t1->isa_long(), "Type must be a long");
    const TypeLong* r1 = t1->is_long();
    const TypeInt*  r2 = t2->is_int();

    // Left input is ZERO ==> the result is ZERO.
    if (r1 == TypeLong::ZERO) {
      return TypeLong::ZERO;
    }
    // Rotate by zero does nothing
    if (r2 == TypeInt::ZERO) {
      return r1;
    }
    if (r1->is_con() && r2->is_con()) {
      julong r1_con = (julong)r1->get_con();
      julong shift = (julong)(r2->get_con()) & (julong)(BitsPerJavaLong - 1); // semantics of Java shifts
      return TypeLong::make((r1_con << shift) | (r1_con >> (64 - shift)));
    }
    return TypeLong::LONG;
  }
}

Node* RotateLeftNode::Ideal(PhaseGVN *phase, bool can_reshape) {
  const Type* t1 = phase->type(in(1));
  const Type* t2 = phase->type(in(2));
  if (t2->isa_int() && t2->is_int()->is_con()) {
    if (t1->isa_int()) {
      int lshift = t2->is_int()->get_con() & 31;
      return new RotateRightNode(in(1), phase->intcon(32 - (lshift & 31)), TypeInt::INT);
    } else if (t1 != Type::TOP) {
      assert(t1->isa_long(), "Type must be a long");
      int lshift = t2->is_int()->get_con() & 63;
      return new RotateRightNode(in(1), phase->intcon(64 - (lshift & 63)), TypeLong::LONG);
    }
  }
  return nullptr;
}

Node* RotateRightNode::Identity(PhaseGVN* phase) {
  const Type* t1 = phase->type(in(1));
  if (t1 == Type::TOP) {
    return this;
  }
  int count = 0;
  assert(t1->isa_int() || t1->isa_long(), "Unexpected type");
  int mask = (t1->isa_int() ? BitsPerJavaInteger : BitsPerJavaLong) - 1;
  if (const_shift_count(phase, this, &count) && (count & mask) == 0) {
    // Rotate by a multiple of 32/64 does nothing
    return in(1);
  }
  return this;
}

const Type* RotateRightNode::Value(PhaseGVN* phase) const {
  const Type* t1 = phase->type(in(1));
  const Type* t2 = phase->type(in(2));
  // Either input is TOP ==> the result is TOP
  if (t1 == Type::TOP || t2 == Type::TOP) {
    return Type::TOP;
  }

  if (t1->isa_int()) {
    const TypeInt* r1 = t1->is_int();
    const TypeInt* r2 = t2->is_int();

    // Left input is ZERO ==> the result is ZERO.
    if (r1 == TypeInt::ZERO) {
      return TypeInt::ZERO;
    }
    // Rotate by zero does nothing
    if (r2 == TypeInt::ZERO) {
      return r1;
    }
    if (r1->is_con() && r2->is_con()) {
      juint r1_con = (juint)r1->get_con();
      juint shift = (juint)(r2->get_con()) & (juint)(BitsPerJavaInteger - 1); // semantics of Java shifts
      return TypeInt::make((r1_con >> shift) | (r1_con << (32 - shift)));
    }
    return TypeInt::INT;
  } else {
    assert(t1->isa_long(), "Type must be a long");
    const TypeLong* r1 = t1->is_long();
    const TypeInt*  r2 = t2->is_int();
    // Left input is ZERO ==> the result is ZERO.
    if (r1 == TypeLong::ZERO) {
      return TypeLong::ZERO;
    }
    // Rotate by zero does nothing
    if (r2 == TypeInt::ZERO) {
      return r1;
    }
    if (r1->is_con() && r2->is_con()) {
      julong r1_con = (julong)r1->get_con();
      julong shift = (julong)(r2->get_con()) & (julong)(BitsPerJavaLong - 1); // semantics of Java shifts
      return TypeLong::make((r1_con >> shift) | (r1_con << (64 - shift)));
    }
    return TypeLong::LONG;
  }
}

//------------------------------ Sum & Mask ------------------------------

// Returns a lower bound on the number of trailing zeros in expr.
static jint AndIL_min_trailing_zeros(const PhaseGVN* phase, const Node* expr, BasicType bt) {
  const TypeInteger* type = phase->type(expr)->isa_integer(bt);
  if (type == nullptr) {
    return 0;
  }

  expr = expr->uncast();
  type = phase->type(expr)->isa_integer(bt);
  if (type == nullptr) {
    return 0;
  }

  if (type->is_con()) {
    jlong con = type->get_con_as_long(bt);
    return con == 0L ? (type2aelembytes(bt) * BitsPerByte) : count_trailing_zeros(con);
  }

  if (expr->Opcode() == Op_ConvI2L) {
    expr = expr->in(1)->uncast();
    bt = T_INT;
    type = phase->type(expr)->isa_int();
  }

  // Pattern: expr = (x << shift)
  if (expr->Opcode() == Op_LShift(bt)) {
    const TypeInt* shift_t = phase->type(expr->in(2))->isa_int();
    if (shift_t == nullptr || !shift_t->is_con()) {
      return 0;
    }
    // We need to truncate the shift, as it may not have been canonicalized yet.
    // T_INT:  0..31 -> shift_mask = 4 * 8 - 1 = 31
    // T_LONG: 0..63 -> shift_mask = 8 * 8 - 1 = 63
    // (JLS: "Shift Operators")
    jint shift_mask = type2aelembytes(bt) * BitsPerByte - 1;
    return shift_t->get_con() & shift_mask;
  }

  return 0;
}

// Checks whether expr is neutral additive element (zero) under mask,
// i.e. whether an expression of the form:
//   (AndX (AddX (expr addend) mask)
//   (expr + addend) & mask
// is equivalent to
//   (AndX addend mask)
//   addend & mask
// for any addend.
// (The X in AndX must be I or L, depending on bt).
//
// We check for the sufficient condition when the lowest set bit in expr is higher than
// the highest set bit in mask, i.e.:
// expr: eeeeee0000000000000
// mask: 000000mmmmmmmmmmmmm
//             <--w bits--->
// We do not test for other cases.
//
// Correctness:
//   Given "expr" with at least "w" trailing zeros,
//   let "mod = 2^w", "suffix_mask = mod - 1"
//
//   Since "mask" only has bits set where "suffix_mask" does, we have:
//     mask = suffix_mask & mask     (SUFFIX_MASK)
//
//   And since expr only has bits set above w, and suffix_mask only below:
//     expr & suffix_mask == 0     (NO_BIT_OVERLAP)
//
//   From unsigned modular arithmetic (with unsigned modulo %), and since mod is
//   a power of 2, and we are computing in a ring of powers of 2, we know that
//     (x + y) % mod         = (x % mod         + y) % mod
//     (x + y) & suffix_mask = (x & suffix_mask + y) & suffix_mask       (MOD_ARITH)
//
//   We can now prove the equality:
//     (expr               + addend)               & mask
//   = (expr               + addend) & suffix_mask & mask    (SUFFIX_MASK)
//   = (expr & suffix_mask + addend) & suffix_mask & mask    (MOD_ARITH)
//   = (0                  + addend) & suffix_mask & mask    (NO_BIT_OVERLAP)
//   =                       addend                & mask    (SUFFIX_MASK)
//
// Hence, an expr with at least w trailing zeros is a neutral additive element under any mask with bit width w.
static bool AndIL_is_zero_element_under_mask(const PhaseGVN* phase, const Node* expr, const Node* mask, BasicType bt) {
  // When the mask is negative, it has the most significant bit set.
  const TypeInteger* mask_t = phase->type(mask)->isa_integer(bt);
  if (mask_t == nullptr || mask_t->lo_as_long() < 0) {
    return false;
  }

  // When the mask is constant zero, we defer to MulNode::Value to eliminate the entire AndX operation.
  if (mask_t->hi_as_long() == 0) {
    assert(mask_t->lo_as_long() == 0, "checked earlier");
    return false;
  }

  jint mask_bit_width = BitsPerLong - count_leading_zeros(mask_t->hi_as_long());
  jint expr_trailing_zeros = AndIL_min_trailing_zeros(phase, expr, bt);
  return expr_trailing_zeros >= mask_bit_width;
}

// Reduces the pattern:
//   (AndX (AddX add1 add2) mask)
// to
//   (AndX add1 mask), if add2 is neutral wrt mask (see above), and vice versa.
Node* MulNode::AndIL_sum_and_mask(PhaseGVN* phase, BasicType bt) {
  Node* add = in(1);
  Node* mask = in(2);
  int addidx = 0;
  if (add->Opcode() == Op_Add(bt)) {
    addidx = 1;
  } else if (mask->Opcode() == Op_Add(bt)) {
    mask = add;
    addidx = 2;
    add = in(addidx);
  }
  if (addidx > 0) {
    Node* add1 = add->in(1);
    Node* add2 = add->in(2);
    if (AndIL_is_zero_element_under_mask(phase, add1, mask, bt)) {
      set_req_X(addidx, add2, phase);
      return this;
    } else if (AndIL_is_zero_element_under_mask(phase, add2, mask, bt)) {
      set_req_X(addidx, add1, phase);
      return this;
    }
  }
  return nullptr;
}