#
# qmake configuration for the NXP i.MX8 based boards (64-bit)
#
# The configuration below is set up for running with the fbdev-style
# Vivante graphics stack. (so eglfs with the eglfs_viv backend, no
# direct drm use via eglfs_kms)

# Wayland should also be functional. However, when writing Wayland
# *compositors* with Qt, the eglfs backend will have to be switched to
# eglfs_viv_wl by setting the QT_QPA_EGLFS_INTEGRATION environment
# variable.
#
# Below is an example configure line that assumes there is an AArch64
# toolchain and sysroot available in $HOME/imx8. On device Qt is
# expected to be placed under /usr/local/qt514 whereas on the host
# 'make install' will copy the host tools and the target libraries to
# $HOME/imx8/qt5.
#
# ./configure -release -opengl es2 -device linux-imx8-g++ \
#   -device-option CROSS_COMPILE=~/imx8/toolchain/x86_64-pokysdk-linux/usr/bin/aarch64-poky-linux/aarch64-poky-linux- \
#   -sysroot ~/imx8/sysroot \
#   -opensource -confirm-license -make libs -prefix /usr/local/qt514 -extprefix ~/imx8/qt5 -v

include(../common/linux_device_pre.conf)

QMAKE_LIBS_EGL         += -lEGL
QMAKE_LIBS_OPENGL_ES2  += -lGLESv2 -lEGL -lGAL
QMAKE_LIBS_OPENVG      += -lOpenVG -lEGL -lGAL

IMX8_CFLAGS             = -march=armv8-a -mtune=cortex-a72.cortex-a53 -DLINUX=1 -DEGL_API_FB=1
QMAKE_CFLAGS           += $$IMX8_CFLAGS
QMAKE_CXXFLAGS         += $$IMX8_CFLAGS

DISTRO_OPTS += aarch64

# Preferred eglfs backend
EGLFS_DEVICE_INTEGRATION = eglfs_viv

include(../common/linux_arm_device_post.conf)

load(qt_config)