/****************************************************************************
**
** Copyright (C) 2017 The Qt Company Ltd.
** Contact: https://www.qt.io/licensing/
**
** This file is part of the examples of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:BSD$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and The Qt Company. For licensing terms
** and conditions see https://www.qt.io/terms-conditions. For further
** information use the contact form at https://www.qt.io/contact-us.
**
** BSD License Usage
** Alternatively, you may use this file under the terms of the BSD license
** as follows:
**
** "Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions are
** met:
**   * Redistributions of source code must retain the above copyright
**     notice, this list of conditions and the following disclaimer.
**   * Redistributions in binary form must reproduce the above copyright
**     notice, this list of conditions and the following disclaimer in
**     the documentation and/or other materials provided with the
**     distribution.
**   * Neither the name of The Qt Company Ltd nor the names of its
**     contributors may be used to endorse or promote products derived
**     from this software without specific prior written permission.
**
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
**
** $QT_END_LICENSE$
**
****************************************************************************/

#include "logorenderer.h"
#include <QPainter>
#include <QPaintEngine>
#include <qmath.h>

LogoRenderer::LogoRenderer()
{
}

LogoRenderer::~LogoRenderer()
{
}


void LogoRenderer::paintQtLogo()
{
    program1.enableAttributeArray(normalAttr1);
    program1.enableAttributeArray(vertexAttr1);
    program1.setAttributeArray(vertexAttr1, vertices.constData());
    program1.setAttributeArray(normalAttr1, normals.constData());
    glDrawArrays(GL_TRIANGLES, 0, vertices.size());
    program1.disableAttributeArray(normalAttr1);
    program1.disableAttributeArray(vertexAttr1);
}


void LogoRenderer::initialize()
{
    initializeOpenGLFunctions();

    glClearColor(0.1f, 0.1f, 0.2f, 1.0f);

    const char *vsrc1 =
        "attribute highp vec4 vertex;\n"
        "attribute mediump vec3 normal;\n"
        "uniform mediump mat4 matrix;\n"
        "varying mediump vec4 color;\n"
        "void main(void)\n"
        "{\n"
        "    vec3 toLight = normalize(vec3(0.0, 0.3, 1.0));\n"
        "    float angle = max(dot(normal, toLight), 0.0);\n"
        "    vec3 col = vec3(0.40, 1.0, 0.0);\n"
        "    color = vec4(col * 0.2 + col * 0.8 * angle, 1.0);\n"
        "    color = clamp(color, 0.0, 1.0);\n"
        "    gl_Position = matrix * vertex;\n"
        "}\n";

    const char *fsrc1 =
        "varying mediump vec4 color;\n"
        "void main(void)\n"
        "{\n"
        "    gl_FragColor = color;\n"
        "}\n";

    program1.addCacheableShaderFromSourceCode(QOpenGLShader::Vertex, vsrc1);
    program1.addCacheableShaderFromSourceCode(QOpenGLShader::Fragment, fsrc1);
    program1.link();

    vertexAttr1 = program1.attributeLocation("vertex");
    normalAttr1 = program1.attributeLocation("normal");
    matrixUniform1 = program1.uniformLocation("matrix");

    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR );
    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR );

    m_fAngle = 0;
    m_fScale = 1;
    createGeometry();
}

void LogoRenderer::render()
{
    glDepthMask(true);

    glClearColor(0.5f, 0.5f, 0.7f, 1.0f);
    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);

    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR );
    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR );

    glFrontFace(GL_CW);
    glCullFace(GL_FRONT);
    glEnable(GL_CULL_FACE);
    glEnable(GL_DEPTH_TEST);

    QMatrix4x4 modelview;
    modelview.rotate(m_fAngle, 0.0f, 1.0f, 0.0f);
    modelview.rotate(m_fAngle, 1.0f, 0.0f, 0.0f);
    modelview.rotate(m_fAngle, 0.0f, 0.0f, 1.0f);
    modelview.scale(m_fScale);
    modelview.translate(0.0f, -0.2f, 0.0f);

    program1.bind();
    program1.setUniformValue(matrixUniform1, modelview);
    paintQtLogo();
    program1.release();

    glDisable(GL_DEPTH_TEST);
    glDisable(GL_CULL_FACE);

    m_fAngle += 1.0f;
}

void LogoRenderer::createGeometry()
{
    vertices.clear();
    normals.clear();

    qreal x1 = +0.06f;
    qreal y1 = -0.14f;
    qreal x2 = +0.14f;
    qreal y2 = -0.06f;
    qreal x3 = +0.08f;
    qreal y3 = +0.00f;
    qreal x4 = +0.30f;
    qreal y4 = +0.22f;

    quad(x1, y1, x2, y2, y2, x2, y1, x1);
    quad(x3, y3, x4, y4, y4, x4, y3, x3);

    extrude(x1, y1, x2, y2);
    extrude(x2, y2, y2, x2);
    extrude(y2, x2, y1, x1);
    extrude(y1, x1, x1, y1);
    extrude(x3, y3, x4, y4);
    extrude(x4, y4, y4, x4);
    extrude(y4, x4, y3, x3);

    const qreal Pi = M_PI;
    const int NumSectors = 100;

    for (int i = 0; i < NumSectors; ++i) {
        qreal angle1 = (i * 2 * Pi) / NumSectors;
        qreal x5 = 0.30 * sin(angle1);
        qreal y5 = 0.30 * cos(angle1);
        qreal x6 = 0.20 * sin(angle1);
        qreal y6 = 0.20 * cos(angle1);

        qreal angle2 = ((i + 1) * 2 * Pi) / NumSectors;
        qreal x7 = 0.20 * sin(angle2);
        qreal y7 = 0.20 * cos(angle2);
        qreal x8 = 0.30 * sin(angle2);
        qreal y8 = 0.30 * cos(angle2);

        quad(x5, y5, x6, y6, x7, y7, x8, y8);

        extrude(x6, y6, x7, y7);
        extrude(x8, y8, x5, y5);
    }

    for (int i = 0;i < vertices.size();i++)
        vertices[i] *= 2.0f;
}

void LogoRenderer::quad(qreal x1, qreal y1, qreal x2, qreal y2, qreal x3, qreal y3, qreal x4, qreal y4)
{
    vertices << QVector3D(x1, y1, -0.05f);
    vertices << QVector3D(x2, y2, -0.05f);
    vertices << QVector3D(x4, y4, -0.05f);

    vertices << QVector3D(x3, y3, -0.05f);
    vertices << QVector3D(x4, y4, -0.05f);
    vertices << QVector3D(x2, y2, -0.05f);

    QVector3D n = QVector3D::normal
        (QVector3D(x2 - x1, y2 - y1, 0.0f), QVector3D(x4 - x1, y4 - y1, 0.0f));

    normals << n;
    normals << n;
    normals << n;

    normals << n;
    normals << n;
    normals << n;

    vertices << QVector3D(x4, y4, 0.05f);
    vertices << QVector3D(x2, y2, 0.05f);
    vertices << QVector3D(x1, y1, 0.05f);

    vertices << QVector3D(x2, y2, 0.05f);
    vertices << QVector3D(x4, y4, 0.05f);
    vertices << QVector3D(x3, y3, 0.05f);

    n = QVector3D::normal
        (QVector3D(x2 - x4, y2 - y4, 0.0f), QVector3D(x1 - x4, y1 - y4, 0.0f));

    normals << n;
    normals << n;
    normals << n;

    normals << n;
    normals << n;
    normals << n;
}

void LogoRenderer::extrude(qreal x1, qreal y1, qreal x2, qreal y2)
{
    vertices << QVector3D(x1, y1, +0.05f);
    vertices << QVector3D(x2, y2, +0.05f);
    vertices << QVector3D(x1, y1, -0.05f);

    vertices << QVector3D(x2, y2, -0.05f);
    vertices << QVector3D(x1, y1, -0.05f);
    vertices << QVector3D(x2, y2, +0.05f);

    QVector3D n = QVector3D::normal
        (QVector3D(x2 - x1, y2 - y1, 0.0f), QVector3D(0.0f, 0.0f, -0.1f));

    normals << n;
    normals << n;
    normals << n;

    normals << n;
    normals << n;
    normals << n;
}