#  -*- Mode: rpm-spec; indent-tabs-mode: nil -*- */
#  SPDX-License-Identifier: LGPL-2.1-or-later
#
#  This file is part of systemd.

# RPM macros for packages installing systemd unit files

%_systemd_util_dir {{ROOTLIBEXECDIR}}
%_unitdir {{SYSTEM_DATA_UNIT_DIR}}
%_userunitdir {{USER_DATA_UNIT_DIR}}
%_presetdir {{SYSTEM_PRESET_DIR}}
%_userpresetdir {{USER_PRESET_DIR}}
%_udevhwdbdir {{UDEV_HWDB_DIR}}
%_udevrulesdir {{UDEV_RULES_DIR}}
%_journalcatalogdir {{SYSTEMD_CATALOG_DIR}}
%_binfmtdir {{BINFMT_DIR}}
%_sysctldir {{SYSCTL_DIR}}
%_sysusersdir {{SYSUSERS_DIR}}
%_tmpfilesdir {{TMPFILES_DIR}}
%_environmentdir {{ENVIRONMENT_DIR}}
%_modulesloaddir {{MODULESLOAD_DIR}}
%_modprobedir {{MODPROBE_DIR}}
%_systemdgeneratordir {{SYSTEM_GENERATOR_DIR}}
%_systemdusergeneratordir {{USER_GENERATOR_DIR}}
%_systemd_system_env_generator_dir {{SYSTEM_ENV_GENERATOR_DIR}}
%_systemd_user_env_generator_dir {{USER_ENV_GENERATOR_DIR}}

# Because we had one release with a typo...
# This is temporary (Remove after systemd 240 is released)
%_environmnentdir %{warn:Use %%_environmentdir instead}%_environmentdir

%systemd_requires \
Requires(post): systemd \
Requires(preun): systemd \
Requires(postun): systemd \
%{nil}

%systemd_ordering \
OrderWithRequires(post): systemd \
OrderWithRequires(preun): systemd \
OrderWithRequires(postun): systemd \
%{nil}

%__systemd_someargs_0(:) %{error:The %%%1 macro requires some arguments}
%__systemd_twoargs_2() %{nil}

%systemd_post() \
%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_post}} \
if [ $1 -eq 1 ] && [ -x %{_bindir}/systemctl ]; then \
    # Initial installation \
    %{_bindir}/systemctl --no-reload preset %{?*} || : \
fi \
%{nil}

%systemd_user_post() %{expand:%systemd_post \\--global %%{?*}}

%systemd_preun() \
%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_preun}} \
if [ $1 -eq 0 ] && [ -x %{_bindir}/systemctl ]; then \
    # Package removal, not upgrade \
    if [ -d /run/systemd/system ]; then \
          %{_bindir}/systemctl --no-reload disable --now %{?*} || : \
    else \
          %{_bindir}/systemctl --no-reload disable %{?*} || : \
    fi \
fi \
%{nil}

%systemd_user_preun() \
%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_user_preun}} \
if [ $1 -eq 0 ] && [ -x %{_bindir}/systemctl ]; then \
    # Package removal, not upgrade \
    %{_bindir}/systemctl --global disable %{?*} || : \
fi \
%{nil}

%systemd_postun() \
%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_postun}} \
%{nil}

%systemd_user_postun() \
%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_user_postun}} \
%{nil}

%systemd_postun_with_restart() \
%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_postun_with_restart}} \
if [ $1 -ge 1 ] && [ -x %{_bindir}/systemctl ]; then \
    # Package upgrade, not uninstall \
    for unit in %{?*}; do \
         %{_bindir}/systemctl set-property $unit Markers=+needs-restart || : \
    done \
fi \
%{nil}

%systemd_user_postun_with_restart() \
%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_postun_with_restart}} \
%{nil}

%udev_hwdb_update() %{nil}

%udev_rules_update() %{nil}

%journal_catalog_update() %{nil}

# Deprecated. Use %tmpfiles_create_package instead
%tmpfiles_create() \
%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# tmpfiles_create}} \
[ -x %{_bindir}/systemd-tmpfiles ] && %{_bindir}/systemd-tmpfiles --create %{?*} || : \
%{nil}

# Deprecated. Use %sysusers_create_package instead
%sysusers_create() \
%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# sysusers_create}} \
[ -x %{_bindir}/systemd-sysusers ] && %{_bindir}/systemd-sysusers %{?*} || : \
%{nil}

%sysusers_create_inline() \
[ -x %{_bindir}/systemd-sysusers ] && %{_bindir}/systemd-sysusers - <<SYSTEMD_INLINE_EOF || : \
%{?*} \
SYSTEMD_INLINE_EOF\
%{nil}

# This should be used by package installation scripts which require users or
# groups to be present before the files installed by the package are present on
# disk (for example because some files are owned by those users or groups).
#
# Example:
#   Source1: %{name}-sysusers.conf
#   ...
#   %install
#   install -D %SOURCE1 %{buildroot}%{_sysusersdir}/%{name}.conf
#   %pre
#   %sysusers_create_package %{name} %SOURCE1
#   %files
#   %{_sysusersdir}/%{name}.conf
%sysusers_create_package() \
%{expand:%%{?!__systemd_twoargs_%#:%%{error:The %%%%sysusers_create_package macro requires two arguments}}} \
systemd-sysusers --replace=%_sysusersdir/%1.conf - <<SYSTEMD_INLINE_EOF || : \
%(cat %2) \
SYSTEMD_INLINE_EOF\
%{nil}

# This may be used by package installation scripts to create files according to
# their tmpfiles configuration from a package installation script, even before
# the files of that package are installed on disk.
#
# Example:
#   Source1: %{name}-tmpfiles.conf
#   ...
#   %install
#   install -D %SOURCE1 %{buildroot}%{_tmpfilesdir}/%{name}.conf
#   %pre
#   %tmpfiles_create_package %{name} %SOURCE1
#   %files
#   %{_tmpfilesdir}/%{name}.conf
%tmpfiles_create_package() \
%{expand:%%{?!__systemd_twoargs_%#:%%{error:The %%%%tmpfiles_create_package macro requires two arguments}}} \
systemd-tmpfiles --replace=%_tmpfilesdir/%1.conf --create - <<SYSTEMD_INLINE_EOF || : \
%(cat %2) \
SYSTEMD_INLINE_EOF\
%{nil}

%sysctl_apply() \
%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# sysctl_apply}} \
[ -x {{ROOTLIBEXECDIR}}/systemd-sysctl ] && {{ROOTLIBEXECDIR}}/systemd-sysctl %{?*} || : \
%{nil}

%binfmt_apply() \
%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# binfmt_apply}} \
[ -x {{ROOTLIBEXECDIR}}/systemd-binfmt ] && {{ROOTLIBEXECDIR}}/systemd-binfmt %{?*} || : \
%{nil}