man/hostnamectl.xml - systemd - Git at Google

 <?xml version='1.0'?> <!--*-nxml-*-->
 <!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
   "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [
 <!ENTITY % entities SYSTEM "custom-entities.ent" >
 %entities;
 ]>
 <!-- SPDX-License-Identifier: LGPL-2.1-or-later -->

 <refentry id="hostnamectl" conditional='ENABLE_HOSTNAMED'
     xmlns:xi="http://www.w3.org/2001/XInclude">

   <refentryinfo>
     <title>hostnamectl</title>
     <productname>systemd</productname>
   </refentryinfo>

   <refmeta>
     <refentrytitle>hostnamectl</refentrytitle>
     <manvolnum>1</manvolnum>
   </refmeta>

   <refnamediv>
     <refname>hostnamectl</refname>
     <refpurpose>Control the system hostname</refpurpose>
   </refnamediv>

   <refsynopsisdiv>
     <cmdsynopsis>
       <command>hostnamectl</command>
       <arg choice="opt" rep="repeat">OPTIONS</arg>
       <arg choice="req">COMMAND</arg>
     </cmdsynopsis>
   </refsynopsisdiv>

   <refsect1>
     <title>Description</title>

     <para><command>hostnamectl</command> may be used to query and change the system hostname and related
     settings.</para>

     <para><citerefentry><refentrytitle>systemd-hostnamed.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>
     and this tool distinguish three different hostnames: the high-level "pretty" hostname which might include
     all kinds of special characters (e.g. "Lennart's Laptop"), the "static" hostname which is the
     user-configured hostname (e.g. "lennarts-laptop"), and the transient hostname which is a fallback value
     received from network configuration (e.g. "node12345678"). If a static hostname is set to a valid value,
     then the transient hostname is not used.</para>

     <para>Note that the pretty hostname has little restrictions on the characters and length used, while the static and
     transient hostnames are limited to the usually accepted characters of Internet domain names, and 64 characters at
     maximum (the latter being a Linux limitation).</para>

     <para>Use
     <citerefentry><refentrytitle>systemd-firstboot</refentrytitle><manvolnum>1</manvolnum></citerefentry> to
     initialize the system hostname for mounted (but not booted) system images.</para>
   </refsect1>

   <refsect1>
     <title>Commands</title>

     <para>The following commands are understood:</para>

     <variablelist>
       <varlistentry>
         <term><command>status</command></term>

         <listitem><para>Show system hostname and related information. If no command is specified,
         this is the implied default.</para></listitem>
       </varlistentry>

       <varlistentry>
         <term><command>hostname</command> [<replaceable>NAME</replaceable>]</term>

         <listitem><para>If no argument is given, print the system hostname. If an
         optional argument <replaceable>NAME</replaceable> is provided then the command changes the
         system hostname to <replaceable>NAME</replaceable>. By default, this will alter the
         pretty, the static, and the transient hostname alike; however, if one or more of <option>--static</option>,
         <option>--transient</option>, <option>--pretty</option> are used, only the selected hostnames are changed. If
         the pretty hostname is being set, and static or transient are being set as well, the specified hostname will be
         simplified in regards to the character set used before the latter are updated. This is done by removing special
         characters and spaces. This ensures that the pretty and the static hostname are always closely related while
         still following the validity rules of the specific name. This simplification of the hostname string is not done
         if only the transient and/or static hostnames are set, and the pretty hostname is left untouched.</para>

         <para>The static and transient hostnames must each be either a single DNS label (a string composed of
         7-bit ASCII lower-case characters and no spaces or dots, limited to the format allowed for DNS domain
         name labels), or a sequence of such labels separated by single dots that forms a valid DNS FQDN. The
         hostname must be at most 64 characters, which is a Linux limitation (DNS allows longer names).</para></listitem>
       </varlistentry>

       <varlistentry>
         <term><command>icon-name</command> [<replaceable>NAME</replaceable>]</term>

         <listitem><para>If no argument is given, print the icon name of the system. If an
         optional argument <replaceable>NAME</replaceable> is provided then the command changes the
         icon name to <replaceable>NAME</replaceable>. The icon name is used by some
         graphical applications to visualize this host. The icon name
         should follow the <ulink
         url="https://standards.freedesktop.org/icon-naming-spec/icon-naming-spec-latest.html">Icon
         Naming Specification</ulink>.</para></listitem>
       </varlistentry>

       <varlistentry>
         <term><command>chassis</command> [<replaceable>TYPE</replaceable>]</term>

         <listitem><para>If no argument is given, print the chassis type. If an
         optional argument <replaceable>TYPE</replaceable> is provided then the command changes the
         chassis type to <replaceable>TYPE</replaceable>. The chassis type is used by
         some graphical applications to visualize the host or alter user interaction.
         Currently, the following chassis types are defined:
         <literal>desktop</literal>,
         <literal>laptop</literal>,
         <literal>convertible</literal>,
         <literal>server</literal>,
         <literal>tablet</literal>,
         <literal>handset</literal>,
         <literal>watch</literal>,
         <literal>embedded</literal>,
         as well as the special chassis types
         <literal>vm</literal> and
         <literal>container</literal> for virtualized systems that lack
         an immediate physical chassis.</para>
         </listitem>
       </varlistentry>

       <varlistentry>
         <term><command>deployment</command> [<replaceable>ENVIRONMENT</replaceable>]</term>

         <listitem><para>If no argument is given, print the deployment environment. If an
         optional argument <replaceable>ENVIRONMENT</replaceable> is provided then the command changes the
         deployment environment to <replaceable>ENVIRONMENT</replaceable>.
         Argument <replaceable>ENVIRONMENT</replaceable>
         must be a single word without any control characters. One of the following is suggested:
         <literal>development</literal>,
         <literal>integration</literal>,
         <literal>staging</literal>,
         <literal>production</literal>.
         </para>
         </listitem>
       </varlistentry>

       <varlistentry>
         <term><command>location</command> [<replaceable>LOCATION</replaceable>]</term>

         <listitem><para>If no argument is given, print the location string for the system. If an
         optional argument <replaceable>LOCATION</replaceable> is provided then the command changes the
         location string for the system to <replaceable>LOCATION</replaceable>.
         Argument <replaceable>LOCATION</replaceable> should be a
         human-friendly, free-form string describing the physical
         location of the system, if it is known and applicable. This
         may be as generic as <literal>Berlin, Germany</literal> or as
         specific as <literal>Left Rack, 2nd Shelf</literal>.</para>
         </listitem>
       </varlistentry>
     </variablelist>
   </refsect1>

   <refsect1>
     <title>Options</title>

     <para>The following options are understood:</para>

     <variablelist>
       <varlistentry>
         <term><option>--no-ask-password</option></term>

         <listitem><para>Do not query the user for authentication for
         privileged operations.</para></listitem>
       </varlistentry>

       <varlistentry>
         <term><option>--static</option></term>
         <term><option>--transient</option></term>
         <term><option>--pretty</option></term>

         <listitem><para>If <command>status</command> is invoked (or no explicit command is given) and one of these
         switches is specified, <command>hostnamectl</command> will print out just this selected hostname.</para>

         <para>If used with <command>hostname</command>, only the selected hostnames will be updated. When more
         than one of these switches are specified, all the specified hostnames will be updated. </para></listitem>
       </varlistentry>

       <xi:include href="user-system-options.xml" xpointer="host" />
       <xi:include href="user-system-options.xml" xpointer="machine" />

       <xi:include href="standard-options.xml" xpointer="help" />
       <xi:include href="standard-options.xml" xpointer="version" />
       <xi:include href="standard-options.xml" xpointer="json" />
     </variablelist>
   </refsect1>

   <refsect1>
     <title>Exit status</title>

     <para>On success, 0 is returned, a non-zero failure code
     otherwise.</para>
   </refsect1>

   <refsect1>
     <title>See Also</title>
     <para>
       <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
       <citerefentry><refentrytitle>hostname</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
       <citerefentry><refentrytitle>hostname</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
       <citerefentry><refentrytitle>machine-info</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
       <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
       <citerefentry><refentrytitle>systemd-hostnamed.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
       <citerefentry><refentrytitle>systemd-firstboot</refentrytitle><manvolnum>1</manvolnum></citerefentry>
     </para>
   </refsect1>

 </refentry>
	<?xml version='1.0'?> <!---nxml--->
	<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
	"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [
	<!ENTITY % entities SYSTEM "custom-entities.ent" >
	%entities;
	]>
	<!-- SPDX-License-Identifier: LGPL-2.1-or-later -->

	<refentry id="hostnamectl" conditional='ENABLE_HOSTNAMED'
	xmlns:xi="http://www.w3.org/2001/XInclude">

	<refentryinfo>
	<title>hostnamectl</title>
	<productname>systemd</productname>
	</refentryinfo>

	<refmeta>
	<refentrytitle>hostnamectl</refentrytitle>
	<manvolnum>1</manvolnum>
	</refmeta>

	<refnamediv>
	<refname>hostnamectl</refname>
	<refpurpose>Control the system hostname</refpurpose>
	</refnamediv>

	<refsynopsisdiv>
	<cmdsynopsis>
	<command>hostnamectl</command>
	<arg choice="opt" rep="repeat">OPTIONS</arg>
	<arg choice="req">COMMAND</arg>
	</cmdsynopsis>
	</refsynopsisdiv>

	<refsect1>
	<title>Description</title>

	<para><command>hostnamectl</command> may be used to query and change the system hostname and related
	settings.</para>

	<para><citerefentry><refentrytitle>systemd-hostnamed.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>
	and this tool distinguish three different hostnames: the high-level "pretty" hostname which might include
	all kinds of special characters (e.g. "Lennart's Laptop"), the "static" hostname which is the
	user-configured hostname (e.g. "lennarts-laptop"), and the transient hostname which is a fallback value
	received from network configuration (e.g. "node12345678"). If a static hostname is set to a valid value,
	then the transient hostname is not used.</para>

	<para>Note that the pretty hostname has little restrictions on the characters and length used, while the static and
	transient hostnames are limited to the usually accepted characters of Internet domain names, and 64 characters at
	maximum (the latter being a Linux limitation).</para>

	<para>Use
	<citerefentry><refentrytitle>systemd-firstboot</refentrytitle><manvolnum>1</manvolnum></citerefentry> to
	initialize the system hostname for mounted (but not booted) system images.</para>
	</refsect1>

	<refsect1>
	<title>Commands</title>

	<para>The following commands are understood:</para>

	<variablelist>
	<varlistentry>
	<term><command>status</command></term>

	<listitem><para>Show system hostname and related information. If no command is specified,
	this is the implied default.</para></listitem>
	</varlistentry>

	<varlistentry>
	<term><command>hostname</command> [<replaceable>NAME</replaceable>]</term>

	<listitem><para>If no argument is given, print the system hostname. If an
	optional argument <replaceable>NAME</replaceable> is provided then the command changes the
	system hostname to <replaceable>NAME</replaceable>. By default, this will alter the
	pretty, the static, and the transient hostname alike; however, if one or more of <option>--static</option>,
	<option>--transient</option>, <option>--pretty</option> are used, only the selected hostnames are changed. If
	the pretty hostname is being set, and static or transient are being set as well, the specified hostname will be
	simplified in regards to the character set used before the latter are updated. This is done by removing special
	characters and spaces. This ensures that the pretty and the static hostname are always closely related while
	still following the validity rules of the specific name. This simplification of the hostname string is not done
	if only the transient and/or static hostnames are set, and the pretty hostname is left untouched.</para>

	<para>The static and transient hostnames must each be either a single DNS label (a string composed of
	7-bit ASCII lower-case characters and no spaces or dots, limited to the format allowed for DNS domain
	name labels), or a sequence of such labels separated by single dots that forms a valid DNS FQDN. The
	hostname must be at most 64 characters, which is a Linux limitation (DNS allows longer names).</para></listitem>
	</varlistentry>

	<varlistentry>
	<term><command>icon-name</command> [<replaceable>NAME</replaceable>]</term>

	<listitem><para>If no argument is given, print the icon name of the system. If an
	optional argument <replaceable>NAME</replaceable> is provided then the command changes the
	icon name to <replaceable>NAME</replaceable>. The icon name is used by some
	graphical applications to visualize this host. The icon name
	should follow the <ulink
	url="https://standards.freedesktop.org/icon-naming-spec/icon-naming-spec-latest.html">Icon
	Naming Specification</ulink>.</para></listitem>
	</varlistentry>

	<varlistentry>
	<term><command>chassis</command> [<replaceable>TYPE</replaceable>]</term>

	<listitem><para>If no argument is given, print the chassis type. If an
	optional argument <replaceable>TYPE</replaceable> is provided then the command changes the
	chassis type to <replaceable>TYPE</replaceable>. The chassis type is used by
	some graphical applications to visualize the host or alter user interaction.
	Currently, the following chassis types are defined:
	<literal>desktop</literal>,
	<literal>laptop</literal>,
	<literal>convertible</literal>,
	<literal>server</literal>,
	<literal>tablet</literal>,
	<literal>handset</literal>,
	<literal>watch</literal>,
	<literal>embedded</literal>,
	as well as the special chassis types
	<literal>vm</literal> and
	<literal>container</literal> for virtualized systems that lack
	an immediate physical chassis.</para>
	</listitem>
	</varlistentry>

	<varlistentry>
	<term><command>deployment</command> [<replaceable>ENVIRONMENT</replaceable>]</term>

	<listitem><para>If no argument is given, print the deployment environment. If an
	optional argument <replaceable>ENVIRONMENT</replaceable> is provided then the command changes the
	deployment environment to <replaceable>ENVIRONMENT</replaceable>.
	Argument <replaceable>ENVIRONMENT</replaceable>
	must be a single word without any control characters. One of the following is suggested:
	<literal>development</literal>,
	<literal>integration</literal>,
	<literal>staging</literal>,
	<literal>production</literal>.
	</para>
	</listitem>
	</varlistentry>

	<varlistentry>
	<term><command>location</command> [<replaceable>LOCATION</replaceable>]</term>

	<listitem><para>If no argument is given, print the location string for the system. If an
	optional argument <replaceable>LOCATION</replaceable> is provided then the command changes the
	location string for the system to <replaceable>LOCATION</replaceable>.
	Argument <replaceable>LOCATION</replaceable> should be a
	human-friendly, free-form string describing the physical
	location of the system, if it is known and applicable. This
	may be as generic as <literal>Berlin, Germany</literal> or as
	specific as <literal>Left Rack, 2nd Shelf</literal>.</para>
	</listitem>
	</varlistentry>
	</variablelist>
	</refsect1>

	<refsect1>
	<title>Options</title>

	<para>The following options are understood:</para>

	<variablelist>
	<varlistentry>
	<term><option>--no-ask-password</option></term>

	<listitem><para>Do not query the user for authentication for
	privileged operations.</para></listitem>
	</varlistentry>

	<varlistentry>
	<term><option>--static</option></term>
	<term><option>--transient</option></term>
	<term><option>--pretty</option></term>

	<listitem><para>If <command>status</command> is invoked (or no explicit command is given) and one of these
	switches is specified, <command>hostnamectl</command> will print out just this selected hostname.</para>

	<para>If used with <command>hostname</command>, only the selected hostnames will be updated. When more
	than one of these switches are specified, all the specified hostnames will be updated. </para></listitem>
	</varlistentry>

	<xi:include href="user-system-options.xml" xpointer="host" />
	<xi:include href="user-system-options.xml" xpointer="machine" />

	<xi:include href="standard-options.xml" xpointer="help" />
	<xi:include href="standard-options.xml" xpointer="version" />
	<xi:include href="standard-options.xml" xpointer="json" />
	</variablelist>
	</refsect1>

	<refsect1>
	<title>Exit status</title>

	<para>On success, 0 is returned, a non-zero failure code
	otherwise.</para>
	</refsect1>

	<refsect1>
	<title>See Also</title>
	<para>
	<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
	<citerefentry><refentrytitle>hostname</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
	<citerefentry><refentrytitle>hostname</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
	<citerefentry><refentrytitle>machine-info</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
	<citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
	<citerefentry><refentrytitle>systemd-hostnamed.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
	<citerefentry><refentrytitle>systemd-firstboot</refentrytitle><manvolnum>1</manvolnum></citerefentry>
	</para>
	</refsect1>

	</refentry>