/*
* Copyright (C) 2017 Amlogic, Inc. All rights reserved.
* *
This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* *
This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
* *
You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
* *
Description:
*/

/* dwc controller pcd drivers  */
/*
 * (C) Copyright 2010 Amlogic, Inc
 *
 * Victor Wan, victor.wan@amlogic.com,
 * 2010-03-24 @ Shanghai
 *
 */
#include "../v2_burning_i.h"
#include "platform.h"
#include "usb_ch9.h"
#include "dwc_pcd.h"
#include "dwc_pcd_irq.h"

pcd_struct_t this_pcd[NUM_EP];//FIXME:This PCD should point to different or cause bug!!

dwc_ep_t g_dwc_eps[NUM_EP];

int dwc_core_init(void)
{
    gotgctl_data_t gctrldata;
    int32_t         snpsid;

    memset(this_pcd, 0, sizeof(this_pcd));

    DBG("DWC_REG_GSNPSID 0x%x\n", DWC_REG_GSNPSID+DWC_REG_BASE);
    snpsid = dwc_read_reg32(DWC_REG_GSNPSID);

    if ( !( 0x4F542000 == (snpsid & 0xFFFFF000) || 0x4F543000 == (snpsid & 0xFFFFF000) ) ) {
        printf("%s,Bad value for SNPSID: 0x%08x\n", __func__, snpsid);
        return -1;
    }

#if 1
    /*GOTGCTL*/
    gctrldata.d32 = dwc_read_reg32(DWC_REG_GOTGCTL);//Can this GOTGCTL read before dwc_otg_core_init() ??
    if (!gctrldata.b.asesvld || !gctrldata.b.bsesvld) {
            printf("GOTGCTL=0x%08x, asesvld=%x, bsesvld=%x\n",
                            gctrldata.d32, gctrldata.b.asesvld, gctrldata.b.bsesvld);
            return __LINE__;

    }
#endif//

    DBG("dwc core init is ok!\n");// show printf is ok.
    /*
     * Disable the global interrupt until all the interrupt
     * handlers are installed.
     */
    gahbcfg_data_t  ahbcfg = {.d32 = 0 };
    ahbcfg.b.glblintrmsk = 1;   /* Enable interrupts bit */
    dwc_modify_reg32(DWC_REG_GAHBCFG, ahbcfg.d32, 0);
    /*
     * Initialize the DWC_otg core.
     */
    dwc_otg_core_init();

    dwc_modify_reg32(DWC_REG_DCTL,0,2);// Disconnect data line
    dwc_otg_pcd_init();
    dwc_modify_reg32(DWC_REG_DCTL,2,0);// Connect data line

    /*
     * Enable the global interrupt after all the interrupt
     * handlers are installed.
     */
    dwc_otg_enable_global_interrupts();

    return 0;
}

int dwc_otg_irq(void)
{
	int ret1,ret2;

	ret1 = dwc_common_irq();
	ret2 = dwc_pcd_irq();
	return (ret1+ret2);
}

void dwc_otg_pullup(int is_on)
{
	if (is_on)
		dwc_modify_reg32(DWC_REG_DCTL,2,0);// connect data line
    else dwc_modify_reg32(DWC_REG_DCTL,0,2);// disconnect data line
}
static void dwc_otg_core_init() //Elvis Fool, add 'static'
{
    gahbcfg_data_t  ahbcfg = {.d32 = 0 };
    gusbcfg_data_t  usbcfg = {.d32 = 0 };
 //   gi2cctl_data_t  i2cctl = {.d32 = 0 };
//    hcfg_data_t     hcfg;
#ifndef USE_FULL_SPEED
	usbcfg.d32 = dwc_read_reg32(DWC_REG_GUSBCFG);

	usbcfg.b.ulpi_ext_vbus_drv = 0;
	usbcfg.b.term_sel_dl_pulse = 0;
	dwc_write_reg32(DWC_REG_GUSBCFG,usbcfg.d32);
#endif
	/*
	* Reset the Controller
	*/
	dwc_otg_core_reset();

	usbcfg.d32 = dwc_read_reg32(DWC_REG_GUSBCFG);
#if (defined CONFIG_USB_DEVICE_V2)
	usbcfg.b.usbtrdtim = 9;
#else
	usbcfg.b.usbtrdtim = 5;
#endif
	usbcfg.b.srpcap = 0;
	usbcfg.b.hnpcap = 0;
#ifdef USE_FULL_SPEED
	dcfg_data_t     dcfg;
	printf("Full Speed\n");
	usbcfg.b.physel = 1;  // Work at full speed
	dwc_write_reg32(DWC_REG_GUSBCFG, usbcfg.d32);

	dwc_otg_core_reset();
/* for HOST
	hcfg.d32 = dwc_read_reg32(DWC_REG_ hcfg);
	hcfg.b.fslspclksel = val;
	dwc_write_reg32(&_core_if->host_if->host_global_regs->hcfg, hcfg.d32);
*/
// for Device
	dcfg.d32 = dwc_read_reg32(DWC_REG_DCFG);
	dcfg.b.devspd = 1;//Hi speed phy run at Full speed
	dwc_write_reg32(DWC_REG_DCFG, dcfg.d32);
#else
	DBG("High Speed\n");
	usbcfg.b.ulpi_utmi_sel = 1;
	usbcfg.b.phyif = 0; // 16 bit
	usbcfg.b.ddrsel = 0;
	dwc_write_reg32(DWC_REG_GUSBCFG, usbcfg.d32);

	dwc_otg_core_reset();
#endif
	ahbcfg.b.dmaenable = 0;
	dwc_write_reg32(DWC_REG_GAHBCFG, ahbcfg.d32);


    /*
     * Enable common interrupts
     */
    dwc_otg_enable_common_interrupts();

    /*
     * Do device or host intialization based on mode during PCD and HCD
     * initialization
     */
     if (dwc_read_reg32(DWC_REG_GINTSTS) & 0x1) {
          DBG("Host Mode\n");
          return ;
    } else {
        DBG("Device Mode\n");
        dwc_otg_core_dev_init();
    }

}

/**
 * This function initialized the PCD portion of the driver.
 *
 */
static int  dwc_otg_pcd_init()
{
        return 0;
}


/**
 * Do core a soft reset of the core.  Be careful with this because it
 * resets all the internal state machines of the core.
 */
static void dwc_otg_core_reset(void)		//Elvis Fool, add 'static'
{
    grstctl_t greset = {.d32 = 0 };
    int             count = 0;

    /*
     * Wait for AHB master IDLE state.
     */
    do {
        udelay(10);
        greset.d32 = dwc_read_reg32(DWC_REG_GRSTCTL);
        if (++count > 100000) {
            //DBG("%s() HANG! AHB Idle GRSTCTL=%0x\n", dwc_otg_core_reset, greset.d32);
            return;
        }
    }
    while (greset.b.ahbidle == 0);

    /*
     * Core Soft Reset
     */
    count = 0;
    greset.b.csftrst = 1;
    dwc_write_reg32(DWC_REG_GRSTCTL, greset.d32);
    do {
        greset.d32 = dwc_read_reg32(DWC_REG_GRSTCTL);
        if (++count > 1000000) {
            //DBG("%s() HANG! Soft Reset GRSTCTL=%0x\n", dwc_otg_core_reset, greset.d32);
            break;
        }
    }
    while (greset.b.csftrst == 1);

    /*
     * Wait for 3 PHY Clocks
     */
    wait_ms(10);
}

static void dwc_otg_enable_common_interrupts()
{
        gintmsk_data_t intr_mask = { 0};
        /* Clear any pending OTG Interrupts */
        dwc_write_reg32(DWC_REG_GOTGINT, 0xFFFFFFFF);
        /* Clear any pending interrupts */
        dwc_write_reg32(DWC_REG_GINTSTS, 0xFFFFFFFF);
        /*
         * Enable the interrupts in the GINTMSK.
         */
        intr_mask.b.modemismatch = 1;
        intr_mask.b.otgintr = 1;
        intr_mask.b.rxstsqlvl = 1;
        intr_mask.b.conidstschng = 1;
        intr_mask.b.wkupintr = 1;
        intr_mask.b.disconnect = 1;
        intr_mask.b.usbsuspend = 1;
        intr_mask.b.sessreqintr = 1;
        intr_mask.b.sofintr     = 1;
        dwc_write_reg32(DWC_REG_GINTMSK, intr_mask.d32);
}

/**
 * This function enables the Device mode interrupts.
 *
 * @param _core_if Programming view of DWC_otg controller
 */
static void dwc_otg_enable_device_interrupts()
{
        gintmsk_data_t intr_mask = {  0};

        /* Disable all interrupts. */
        dwc_write_reg32( DWC_REG_GINTMSK, 0);

        /* Clear any pending interrupts */
        dwc_write_reg32( DWC_REG_GINTSTS, 0xFFFFFFFF);

        /* Enable the common interrupts */
        dwc_otg_enable_common_interrupts( );

        /* Enable interrupts */
        intr_mask.b.usbreset = 1;
        intr_mask.b.enumdone = 1;
        intr_mask.b.epmismatch = 1;
        intr_mask.b.inepintr = 1;
        intr_mask.b.outepintr = 1;
        intr_mask.b.erlysuspend = 1;
        intr_mask.b.sofintr     = 1;

        dwc_modify_reg32( DWC_REG_GINTMSK, intr_mask.d32, intr_mask.d32);

}
/**
 * This function enables the controller's Global Interrupt in the AHB Config
 * register.
 *
 * @param[in] _core_if Programming view of DWC_otg controller.
 */
static void dwc_otg_enable_global_interrupts( )
{
        gahbcfg_data_t ahbcfg = { 0};
        ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
        dwc_modify_reg32(DWC_REG_GAHBCFG, 0, ahbcfg.d32);
}


/**
 * This function initializes the DWC_otg controller registers for
 * device mode.
 *
 * @param _core_if Programming view of DWC_otg controller
 *
 */
static void dwc_otg_core_dev_init(void)
{
        dcfg_data_t dcfg = { 0};
        grstctl_t resetctl = { 0 };
        int i;
        fifosize_data_t nptxfifosize;

        /* Restart the Phy Clock */
        dwc_write_reg32(DWC_REG_PCGCCTL, 0);

        /* Device configuration register */
	dcfg.d32 = dwc_read_reg32(DWC_REG_DCFG);
#ifdef USE_FULL_SPEED
	dcfg.b.devspd = 1;//Hi speed phy run at Full speed
#else
	dcfg.b.devspd = 0;
#endif
	dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80;
	dwc_write_reg32(DWC_REG_DCFG, dcfg.d32);

        /* Configure data FIFO sizes */

	/* Rx FIFO */
      dwc_write_reg32(DWC_REG_GRXFSIZ, 256 );
      //DBG("new grxfsiz=%08x\n",dwc_read_reg32(DWC_REG_GRXFSIZ));

	/* Non-periodic Tx FIFO */
      nptxfifosize.b.depth  = 256;
      nptxfifosize.b.startaddr = 256;
      dwc_write_reg32(DWC_REG_GNPTXFSIZ, nptxfifosize.d32 );
      //DBG("new gnptxfsiz=%08x\n",dwc_read_reg32(DWC_REG_GNPTXFSIZ));

        /* Flush the FIFOs */
      dwc_otg_flush_tx_fifo( 0x10); /* all Tx FIFOs */
      dwc_otg_flush_rx_fifo();

	/* Flush the Learning Queue. */
      resetctl.b.intknqflsh = 1;
      dwc_write_reg32( DWC_REG_GRSTCTL, resetctl.d32);

        /* Clear all pending Device Interrupts */
        dwc_write_reg32( DWC_REG_DIEPMSK, 0 );
        dwc_write_reg32( DWC_REG_DOEPMSK, 0 );
        dwc_write_reg32( DWC_REG_DAINT, 0xFFFFFFFF );
        dwc_write_reg32( DWC_REG_DAINTMSK, 0 );

        for (i=0; i < NUM_EP; i++) {
		depctl_data_t depctl;
		depctl.d32 = dwc_read_reg32(DWC_REG_IN_EP_REG(i));
		if (depctl.b.epena) {
			depctl.d32 = 0;
			depctl.b.epdis = 1;
			depctl.b.snak = 1;
		} else {
			depctl.d32 = 0;
		}
		dwc_write_reg32( DWC_REG_IN_EP_REG(i),depctl.d32);

		depctl.d32 = dwc_read_reg32(DWC_REG_OUT_EP_REG(i));
		if (depctl.b.epena) {
			depctl.d32 = 0;
			depctl.b.epdis = 1;
			depctl.b.snak = 1;
		} else {
			depctl.d32 = 0;
		}
		dwc_write_reg32( DWC_REG_OUT_EP_REG(i), depctl.d32);

		/* Device IN/OUT Endpoint Transfer Size */
		dwc_write_reg32(DWC_REG_IN_EP_TSIZE(i), 0);
		dwc_write_reg32(DWC_REG_OUT_EP_TSIZE(i), 0);
		/* Device IN/OUT Endpoint DMA Address Register */
		dwc_write_reg32( DWC_REG_IN_EP_DMA(i), 0);
		dwc_write_reg32( DWC_REG_OUT_EP_DMA(i), 0);
		/* Device IN/OUT Endpoint Interrupt Register */
		//dwc_write_reg32( DWC_REG_IN_EP_DMA(i), 0xFF);
		//dwc_write_reg32( DWC_REG_OUT_EP_INTR(i), 0xFF);
        }

        //d wc_otg_set_vbus_power(_core_if, 0); //Power off VBus

        dwc_otg_enable_device_interrupts();

	  DBG("init gintmsk: 0x%x\n",dwc_read_reg32(DWC_REG_GINTMSK));
}
/**
 * Flush a Tx FIFO.
 *
 * @param _core_if Programming view of DWC_otg controller.
 * @param _num Tx FIFO to flush.
 */
static void dwc_otg_flush_tx_fifo( const int _num ) 	//Elvis Fool, add 'static'
{
        grstctl_t greset = { 0};
        int count = 0;


	 DBG("dwc_otg_flush_tx_fifo: %d\n",_num);
        greset.b.txfflsh = 1;
        greset.b.txfnum = _num;
        dwc_write_reg32(DWC_REG_GRSTCTL, greset.d32 );

        do {
                greset.d32 = dwc_read_reg32( DWC_REG_GRSTCTL);
                if (++count > 10000) {
                       // ERR("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
                       //           "dwc_otg_flush_tx_fifo", greset.d32,
                       //           dwc_read_reg32( DWC_REG_GNPTXSTS));
                        break;
                }

        } while (greset.b.txfflsh == 1);
        /* Wait for 3 PHY Clocks*/
        udelay(1);
}

/**
 * Flush Rx FIFO.
 *
 * @param _core_if Programming view of DWC_otg controller.
 */
static void dwc_otg_flush_rx_fifo( )
{
        grstctl_t greset = { 0};
        int count = 0;

	  DBG("dwc_otg_flush_rx_fifo\n");
        greset.b.rxfflsh = 1;
        dwc_write_reg32( DWC_REG_GRSTCTL, greset.d32 );

        do {
                greset.d32 = dwc_read_reg32( DWC_REG_GRSTCTL);
                if (++count > 10000) {
                        //ERR("%s() HANG! GRSTCTL=%0x\n", "dwc_otg_flush_rx_fifo",
                        //         greset.d32);
                        break;
                }
        } while (greset.b.rxfflsh == 1);
        /* Wait for 3 PHY Clocks*/
        udelay(1);
}
/**
 * This function does the setup for a data transfer for EP0 and starts
 * the transfer.  For an IN transfer, the packets will be loaded into
 * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
 * unloaded from the Rx FIFO in the ISR.
 *
 * @param _core_if Programming view of DWC_otg controller.
 * @param _ep The EP0 data.
 */

void dwc_otg_ep_start_transfer(dwc_ep_t *_ep)
{
	depctl_data_t depctl;
	deptsiz_data_t deptsiz;
	int epctl_reg,epctltsize_reg;
	int ep_num = _ep->num;
	int is_in = _ep->is_in;
	int ep_mps = _ep->maxpacket;

	//DBG("dwc_otg_ep_start_transfer: xfer_len:%d\n",_ep->xfer_len);

        _ep->total_len = _ep->xfer_len;

	if (is_in) {
		epctl_reg = DWC_REG_IN_EP_REG(ep_num);
		epctltsize_reg = DWC_REG_IN_EP_TSIZE(ep_num);
	}else{
		epctl_reg = DWC_REG_OUT_EP_REG(ep_num);
		epctltsize_reg = DWC_REG_OUT_EP_TSIZE(ep_num);
	}

	depctl.d32 = dwc_read_reg32(epctl_reg);
	deptsiz.d32 = dwc_read_reg32(epctltsize_reg);

	/* Zero Length Packet? */
	if (_ep->xfer_len == 0) {
		deptsiz.b.xfersize = is_in?0:ep_mps;
		deptsiz.b.pktcnt = 1;
	}
    else {
		deptsiz.b.pktcnt = (_ep->xfer_len + (ep_mps - 1)) /ep_mps;
		if (is_in && _ep->xfer_len < ep_mps)
			deptsiz.b.xfersize = _ep->xfer_len;
		else
            deptsiz.b.xfersize = deptsiz.b.pktcnt * ep_mps;
            /*deptsiz.b.xfersize = _ep->xfer_len - _ep->xfer_count;////////victor fixed*/
	}

	/* Fill size and count */
	dwc_write_reg32(epctltsize_reg,deptsiz.d32);

	/* EP enable */
	depctl.b.cnak = 1;
	depctl.b.epena = 1;
	dwc_write_reg32 (epctl_reg, depctl.d32);

	/* IN endpoint */
	if (is_in) {
		gintmsk_data_t intr_mask = {0};
		//gnptxsts_data_t tx_status = { 0};

		//tx_status.d32 = dwc_read_reg32(DWC_REG_GNPTXSTS);
		//if (tx_status.b.nptxqspcavail == 0){
		//	return;
		//}

		/**
		 * Enable the Non-Periodic Tx FIFO empty interrupt, the
		 * data will be written into the fifo by the ISR.
		 */

		/* First clear it from GINTSTS */
		intr_mask.b.nptxfempty = 1;
		dwc_modify_reg32( DWC_REG_GINTSTS,intr_mask.d32, 0);
		dwc_modify_reg32( DWC_REG_GINTMSK,intr_mask.d32, intr_mask.d32);

	}

}

int dwc_otg_ep_req_start(pcd_struct_t *pcd,int ep_num)
{
	dwc_ep_t *ep = &g_dwc_eps[ep_num];

	ep->num = ep_num;
	//DBG("dwc_otg_ep_req_start: ep%d\n",ep_num);
        /* EP0 Transfer? */
	if (ep_num == 0)
    {
		//DBG("EP0 State: %d\n",pcd->ep0state);
		switch (pcd->ep0state)
        {
			case EP0_IN_DATA_PHASE:
				break;

			case EP0_OUT_DATA_PHASE:
				if (pcd->request_config) {
				        /* Work around for SetConfig cmd */
				        /* Complete STATUS PHASE */
				        ep->is_in = 1;
				        pcd->ep0state = EP0_STATUS;
				}
				else if(pcd->length == 0)
				{
				        /* Work around for MSC Reset cmd */
				        /* Complete STATUS PHASE */
				        ep->is_in = 1;
				        pcd->ep0state = EP0_STATUS;
				}
			break;

			default:
				return -1;
		}

		ep->start_xfer_buff = (uint8_t*)pcd->buf;
		ep->xfer_buff = (uint8_t*)pcd->buf;
		ep->xfer_len = pcd->length;
		ep->xfer_count = 0;
		ep->sent_zlp = 0;
		ep->total_len = ep->xfer_len;
		ep->maxpacket = 64;
		dwc_otg_ep_start_transfer( ep );

	}
    else {
		/* Setup and start the Transfer for Bulk */
		ep->start_xfer_buff = (uint8_t*)pcd->bulk_buf + pcd->bulk_xfer_len;
		ep->xfer_buff = (uint8_t*)pcd->bulk_buf + pcd->bulk_xfer_len;
        ep->xfer_len = pcd->bulk_len;
        /*ep->xfer_len  = MIN(pcd->bulk_data_len , pcd->bulk_len);////Victor fixed!!*/
		ep->xfer_count = 0;
		ep->sent_zlp = 0;
		ep->total_len = ep->xfer_len;
		ep->maxpacket = BULK_EP_MPS;
		ep->is_in = (ep_num == BULK_IN_EP_NUM);
        //tranfer  failed here after printf here

		dwc_otg_bulk_ep_activate( ep );
        /*printf("start_xfer_buf=0x%x, xfer_buf=0x%x, xfer_len 0x%x\n", ep->start_xfer_buff, ep->xfer_buff, ep->xfer_len);*/
		dwc_otg_ep_start_transfer( ep );
	}

	return 0;

}

static void dwc_otg_bulk_ep_activate(dwc_ep_t *ep)
{
	depctl_data_t depctl = {0};
	daint_data_t daintmsk = {0};
	int epctl;
	int ep_num = ep->num;

	if (ep->is_in) {
		epctl = DWC_REG_IN_EP_REG(ep_num);
		daintmsk.ep.in = 1<<BULK_IN_EP_NUM; //ep1:BULK_IN
	}
	else{
		epctl = DWC_REG_OUT_EP_REG(ep_num);
		daintmsk.ep.out = 1<<BULK_OUT_EP_NUM;//ep2:BULK_OUT
	}

	depctl.d32 = dwc_read_reg32(epctl);
	if (!depctl.b.usbactep) {
		depctl.b.mps = BULK_EP_MPS;
		depctl.b.eptype = 2;//BULK_STYLE
		depctl.b.setd0pid = 1;
		depctl.b.txfnum = 0;   //Non-Periodic TxFIFO
		depctl.b.usbactep = 1;

		dwc_write_reg32(epctl, depctl.d32);
	}

	dwc_modify_reg32(DWC_REG_DAINTMSK, 0, daintmsk.d32);

	return;
}

int dwc_otg_bulk_ep_enable(int is_in)
{
    depctl_data_t depctl = {0};
	daint_data_t daintmsk = {0};
	int epctl;
	const int ep_num = is_in ? BULK_IN_EP_NUM : BULK_OUT_EP_NUM;

	if (is_in) {
		epctl = DWC_REG_IN_EP_REG(ep_num);
		daintmsk.ep.in = 1<<BULK_IN_EP_NUM; //ep1:BULK_IN
	}
	else{
		epctl = DWC_REG_OUT_EP_REG(ep_num);
		daintmsk.ep.out = 1<<BULK_OUT_EP_NUM;//ep2:BULK_OUT
	}

	depctl.d32 = dwc_read_reg32(epctl);
	if (!depctl.b.usbactep) {
		depctl.b.mps = BULK_EP_MPS;
		depctl.b.eptype = 2;//BULK_STYLE
		depctl.b.setd0pid = 1;
		depctl.b.txfnum = 0;   //Non-Periodic TxFIFO
		depctl.b.usbactep = 1;

        dwc_write_reg32(epctl, depctl.d32);
	}

	dwc_modify_reg32(DWC_REG_DAINTMSK, 0, daintmsk.d32);

	return 0;
}

void dwc_otg_power_off_phy(void)
{
#if (defined CONFIG_USB_DEVICE_V2)
	gintsts_data_t  gintr_status;
	gintsts_data_t  gintr_msk;
	u32 count = 1000;
	u32 sof = 0;

	while (count--) {
		gintr_msk.d32 = dwc_read_reg32(DWC_REG_GINTMSK);
		gintr_status.d32 = dwc_read_reg32(DWC_REG_GINTSTS);

		//if ((gintr_status.d32 & gintr_msk.d32)== 0)
			//continue;

		gintr_status.d32 = gintr_status.d32 & gintr_msk.d32;
		if (gintr_status.b.sofintr) {
			sof = 1;
			dwc_write_reg32(DWC_REG_GINTSTS, gintr_status.d32);
			break;
		}

		dwc_write_reg32(DWC_REG_GINTSTS, gintr_status.d32);
		udelay(1);
	}

	if (!sof) {
		ERR("sof timeout, reset usb phy tuning\n");
		set_usb_phy21_tuning_update_reset();
		mdelay(150);
	}

	return;
#else
    //cause DWC_REG_GSNPSID value 0 after call this when g12
	dwc_write_reg32(DWC_REG_PCGCCTL, 0xF);
#endif//#if (defined CONFIG_USB_DEVICE_V2)
}