)]}'
{
  "commit": "2ec1abea4359b94523d45a20d68d8582e09ace46",
  "tree": "8ca03b8cc3f5fb14c2711950c87bda5ddb805a42",
  "parents": [
    "6299487ef5dcdb06e0394f5955755c8dd9ce707b"
  ],
  "author": {
    "name": "Tom Rix",
    "email": "Tom.Rix@windriver.com",
    "time": "Sat Oct 31 12:37:45 2009 -0500"
  },
  "committer": {
    "name": "Remy Bohmer",
    "email": "linux@bohmer.net",
    "time": "Sun Dec 20 12:51:51 2009 +0100"
  },
  "message": "OMAP3 zoom2 Use usbtty if the debug board is not connected.\n\nThe preferred serial output comes from the debug board.\nWhen the debug board is disconnected, fall back on using\nusbtty from the usb connector on the Zoom2 board.\n\nThis shows up as /dev/ttyACM0 in a linux host.\n\nSigned-off-by: Tom Rix \u003cTom.Rix@windriver.com\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "a3d777dfaddc7b16f23ea8c25e15ce8f2bc62fc2",
      "old_mode": 33188,
      "old_path": "board/logicpd/zoom2/zoom2_serial.c",
      "new_id": "ba58e39346fdfbeca12d3122b520583658259d03",
      "new_mode": 33188,
      "new_path": "board/logicpd/zoom2/zoom2_serial.c"
    },
    {
      "type": "modify",
      "old_id": "2b076666e962bc1ed1848faa8f146ad7720e19d2",
      "old_mode": 33188,
      "old_path": "include/configs/omap3_zoom2.h",
      "new_id": "7a8beb8505d1d966426d110eeed438c1525b81f1",
      "new_mode": 33188,
      "new_path": "include/configs/omap3_zoom2.h"
    },
    {
      "type": "modify",
      "old_id": "43451a30195753231649214018ddb46288890941",
      "old_mode": 33188,
      "old_path": "include/serial.h",
      "new_id": "f2638ec5667df90efd08f4610e5d2efd0ba50c8d",
      "new_mode": 33188,
      "new_path": "include/serial.h"
    }
  ]
}