)]}'
{
  "commit": "33846df28fa1f4cf96a96c18142d48d813caa892",
  "tree": "12db31d9d2321af9c1a4e728eb070d4b4c372e1c",
  "parents": [
    "06e9f7df054d26d7f49c56bf9a6844b193ad6313"
  ],
  "author": {
    "name": "Wolfgang Grandegger",
    "email": "wg@grandegger.com",
    "time": "Wed Feb 11 18:38:23 2009 +0100"
  },
  "committer": {
    "name": "Scott Wood",
    "email": "scottwood@freescale.com",
    "time": "Mon Mar 23 15:53:40 2009 -0500"
  },
  "message": "Add wait flags to support board/chip specific delays\n\nThe NAND flash on the TQM8548_BE modules requires a short delay after\nrunning the UPM pattern like the MPC8360ERDK board does. The TQM8548_BE\nrequires a further short delay after writing out a buffer. Normally the\nR/B pin should be checked, but it\u0027s not connected on the TQM8548_BE.\nThe corresponding Linux FSL UPM driver uses similar delay points at the\nsame locations. To manage these extra delays in a more general way, I\nintroduced the \"wait_flags\" field allowing the board-specific driver to\nspecify various types of extra delay.\n\nSigned-off-by: Wolfgang Grandegger \u003cwg@grandegger.com\u003e\nSigned-off-by: Scott Wood \u003cscottwood@freescale.com\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "aa43350f2d52a20da238ecbf36f21a58fe6384f4",
      "old_mode": 33188,
      "old_path": "board/freescale/mpc8360erdk/nand.c",
      "new_id": "9ffffb436cf667fe04608f5a7e61b0df78d7b1d1",
      "new_mode": 33188,
      "new_path": "board/freescale/mpc8360erdk/nand.c"
    },
    {
      "type": "modify",
      "old_id": "e7e746b550d6a57c7dd9c34b76d0c643603d874f",
      "old_mode": 33188,
      "old_path": "drivers/mtd/nand/fsl_upm.c",
      "new_id": "7cb99cbc074b7bb3c020b20e32dd86a8d32ae513",
      "new_mode": 33188,
      "new_path": "drivers/mtd/nand/fsl_upm.c"
    },
    {
      "type": "modify",
      "old_id": "10f5ddd87f55a94dfd5557a17ba5f4ff243158b8",
      "old_mode": 33188,
      "old_path": "include/linux/mtd/fsl_upm.h",
      "new_id": "5d7156fac95637490b245cd17e5e6b1bc681a885",
      "new_mode": 33188,
      "new_path": "include/linux/mtd/fsl_upm.h"
    }
  ]
}