)]}'
{
  "commit": "3ce04d9bba017012751cbecf25b923bcb02ccb54",
  "tree": "dce33217944fbf9337d3c140e772dafef191e056",
  "parents": [
    "3857f8f5a5a029a2ff403f83e7b9987cfdb09569"
  ],
  "author": {
    "name": "Stefan Roese",
    "email": "sr@denx.de",
    "time": "Tue Jul 12 13:26:47 2011 +0200"
  },
  "committer": {
    "name": "Stefan Roese",
    "email": "sr@denx.de",
    "time": "Thu Jul 28 19:16:16 2011 +0200"
  },
  "message": "net/4xx: Install interrupt handler after driver registration\n\nOnly install der 4xx-EMAC interrupt handlers *after* the core\nnetwork driver is registered.\n\nThis problem was noticed on the APM Taishan 440GX board, where\nthe board hung upon bootup after displaying \"Net:\".\n\nSigned-off-by: Stefan Roese \u003csr@denx.de\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "b1763b18bbe6d1e8541f83d2980ccd5f930de8f7",
      "old_mode": 33188,
      "old_path": "drivers/net/4xx_enet.c",
      "new_id": "f328574fe4b3cf86dbcdc691b14e83397437e9b2",
      "new_mode": 33188,
      "new_path": "drivers/net/4xx_enet.c"
    }
  ]
}