/*
 * Google Veyron Mickey Rev 0 board device tree source
 *
 * Copyright 2015 Google, Inc
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 *  Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

/dts-v1/;
#include "rk3288-veyron-chromebook.dtsi"

/ {
	model = "Google Mickey";
	compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
		     "google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
		     "google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
		     "google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
		     "google,veyron-mickey-rev0", "google,veyron-mickey",
		     "google,veyron", "rockchip,rk3288";

	vcc_5v: vcc-5v {
		vin-supply = <&vcc33_sys>;
	};

	vcc33_io: vcc33_io {
		compatible = "regulator-fixed";
		regulator-name = "vcc33_io";
		regulator-always-on;
		regulator-boot-on;
		vin-supply = <&vcc33_sys>;
	};
};

&cpu_thermal {
	/delete-node/ trips;
	/delete-node/ cooling-maps;

	trips {
		cpu_alert_almost_warm: cpu_alert_almost_warm {
			temperature = <63000>; /* millicelsius */
			hysteresis = <2000>; /* millicelsius */
			type = "passive";
		};
		cpu_alert_warm: cpu_alert_warm {
			temperature = <65000>; /* millicelsius */
			hysteresis = <2000>; /* millicelsius */
			type = "passive";
		};
		cpu_alert_almost_hot: cpu_alert_almost_hot {
			temperature = <80000>; /* millicelsius */
			hysteresis = <2000>; /* millicelsius */
			type = "passive";
		};
		cpu_alert_hot: cpu_alert_hot {
			temperature = <82000>; /* millicelsius */
			hysteresis = <2000>; /* millicelsius */
			type = "passive";
		};
		cpu_alert_hotter: cpu_alert_hotter {
			temperature = <84000>; /* millicelsius */
			hysteresis = <2000>; /* millicelsius */
			type = "passive";
		};
		cpu_alert_very_hot: cpu_alert_very_hot {
			temperature = <85000>; /* millicelsius */
			hysteresis = <2000>; /* millicelsius */
			type = "passive";
		};
		cpu_crit: cpu_crit {
			temperature = <90000>; /* millicelsius */
			hysteresis = <2000>; /* millicelsius */
			type = "critical";
		};
	};

	cooling-maps {
		/*
		 * After 1st level, throttle the CPU down to as low as 1.4 GHz
		 * and don't let the GPU go faster than 400 MHz.  Note that we
		 * won't throttle the GPU lower than 400 MHz due to CPU
		 * heat--we'll let the GPU do the rest itself.
		 */
		cpu_warm_limit_cpu {
			trip = <&cpu_alert_warm>;
			cooling-device =
				<&cpu0 THERMAL_NO_LIMIT 4>;
		};

		/*
		 * Add some discrete steps to help throttling system deal
		 * with the fact that there are two passive cooling devices:
		 * the CPU and the GPU.
		 *
		 * - 1.2 GHz - 1.0 GHz (almost hot)
		 * - 800 MHz           (hot)
		 * - 800 MHz - 696 MHz (hotter)
		 * - 696 MHz - min     (very hot)
		 *
		 * Note:
		 * - 800 MHz appears to be a "sweet spot" for me.  I can run
		 *   some pretty serious workload here and be happy.
		 * - After 696 MHz we stop lowering voltage, so throttling
		 *   past there is less effective.
		 */
		cpu_almost_hot_limit_cpu {
			trip = <&cpu_alert_almost_hot>;
			cooling-device =
				<&cpu0 5 6>;
		};
		cpu_hot_limit_cpu {
			trip = <&cpu_alert_hot>;
			cooling-device =
				<&cpu0 7 7>;
		};
		cpu_hotter_limit_cpu {
			trip = <&cpu_alert_hotter>;
			cooling-device =
				<&cpu0 7 8>;
		};
		cpu_very_hot_limit_cpu {
			trip = <&cpu_alert_very_hot>;
			cooling-device =
				<&cpu0 8 THERMAL_NO_LIMIT>;
		};
	};
};

&dmc {
	rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
		0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
		0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0
		0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4
		0x8 0x1f4>;
	rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076
		0x0 0xc3 0x6 0x2>;
	rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 1>;
};

&emmc {
	/delete-property/mmc-hs200-1_8v;
};

&i2c2 {
	status = "disabled";
};

&i2c4 {
	status = "disabled";
};

&i2s {
	status = "okay";
	clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
};

&rk808 {
	pinctrl-names = "default";
	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
	dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
		    <&gpio7 15 GPIO_ACTIVE_HIGH>;

	/delete-property/ vcc6-supply;
	/delete-property/ vcc12-supply;

	vcc11-supply = <&vcc33_sys>;

	regulators {
		/* vcc33_io is sourced directly from vcc33_sys */
		/delete-node/ LDO_REG1;
		/delete-node/ LDO_REG7;

		/* This is not a pwren anymore, but the real power supply */
		vdd10_lcd: LDO_REG7 {
			regulator-always-on;
			regulator-boot-on;
			regulator-min-microvolt = <1000000>;
			regulator-max-microvolt = <1000000>;
			regulator-name = "vdd10_lcd";
			regulator-suspend-mem-disabled;
		};

		vcc18_lcd: LDO_REG8 {
			regulator-always-on;
			regulator-boot-on;
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-name = "vcc18_lcd";
			regulator-suspend-mem-disabled;
		};
	};
};

&pinctrl {
	hdmi {
		power_hdmi_on: power-hdmi-on {
			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	pmic {
		dvs_1: dvs-1 {
			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
		};

		dvs_2: dvs-2 {
			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
		};
	};
};

&sdmmc {
	status = "disabled";
};

&sdio0 {
	status = "disabled";
};

&sdmmc {
	status = "disabled";
};

&spi0 {
	status = "disabled";
};

&usb_host0_ehci {
	status = "disabled";
};

&usb_host1 {
	status = "disabled";
};

&vcc50_hdmi {
	enable-active-high;
	gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&power_hdmi_on>;
};