/*
 * AMLOGIC LCD panel driver.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the named License,
 * or any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 */

#include <common.h>
#include <amlogic/media/vout/lcd/aml_lcd.h>
#ifdef CONFIG_AML_LCD_EXTERN
#include "lcd_extern.h"
#endif

static char lcd_cpu_gpio[LCD_CPU_GPIO_NUM_MAX][LCD_GPIO_NAME_MAX] = {
	"GPIOZ_9", /* panel rst */
	"GPIOZ_8", /* panel power */
	"invalid", /* ending flag */
};

static struct lcd_power_step_s lcd_power_on_step[] = {
	{LCD_POWER_TYPE_CPU,   1,0,100,}, /* lcd power */
	{LCD_POWER_TYPE_CPU,   0,0,10,}, /* lcd_reset */
	{LCD_POWER_TYPE_CPU,   0,1,20,}, /* lcd_reset */
	{LCD_POWER_TYPE_SIGNAL,0,0,0,},  /* signal */
	{LCD_POWER_TYPE_MAX,   0,0,0,},  /* ending flag */
};
static struct lcd_power_step_s lcd_power_off_step[] = {
	{LCD_POWER_TYPE_SIGNAL,0,0,50,},  /* signal */
	{LCD_POWER_TYPE_CPU,   0,0,10,}, /* lcd_reset */
	{LCD_POWER_TYPE_CPU,   1,1,100,}, /* power off */
	{LCD_POWER_TYPE_MAX,   0,0,0,},   /* ending flag */
};

static struct lcd_power_step_s lcd_power_on_step_P070ACB[] = {
	{LCD_POWER_TYPE_CPU,   1,0,200,}, /* lcd power */
	{LCD_POWER_TYPE_SIGNAL,0,0,0,},  /* signal */
	{LCD_POWER_TYPE_MAX,   0,0,0,},  /* ending flag */
};
static struct lcd_power_step_s lcd_power_off_step_P070ACB[] = {
	{LCD_POWER_TYPE_SIGNAL,0,0,0,},  /* signal */
	{LCD_POWER_TYPE_CPU,   0,0,20,}, /* lcd_reset */
	{LCD_POWER_TYPE_CPU,   1,1,100,}, /* power off */
	{LCD_POWER_TYPE_MAX,   0,0,0,},   /* ending flag */
};

static struct lcd_power_step_s lcd_power_on_step_TL050FHV02CT[] = {
	{LCD_POWER_TYPE_CPU,   1,0,200,}, /* lcd power */
	{LCD_POWER_TYPE_CPU,   0,1,20,}, /* lcd reset: 1 */
	{LCD_POWER_TYPE_CPU,   0,0,10,}, /* lcd reset: 0 */
	{LCD_POWER_TYPE_CPU,   0,1,20,}, /* lcd reset: 1 */
	{LCD_POWER_TYPE_SIGNAL,0,0,0,},  /* signal */
	{LCD_POWER_TYPE_MAX,   0,0,0,},  /* ending flag */
};
static struct lcd_power_step_s lcd_power_off_step_TL050FHV02CT[] = {
	{LCD_POWER_TYPE_SIGNAL,0,0,0,},  /* signal */
	{LCD_POWER_TYPE_CPU,   0,0,20,}, /* lcd_reset */
	{LCD_POWER_TYPE_CPU,   1,1,100,}, /* power off */
	{LCD_POWER_TYPE_MAX,   0,0,0,},   /* ending flag */
};

static struct lcd_power_step_s lcd_power_on_step_TL070WSH27[] = {
	{LCD_POWER_TYPE_CPU,   1,0,100,}, /* lcd power */
	{LCD_POWER_TYPE_CPU,   0,0,10,}, /* lcd reset: 0 */
	{LCD_POWER_TYPE_CPU,   0,1,20,}, /* lcd reset: 1 */
	{LCD_POWER_TYPE_SIGNAL,0,0,0,},  /* signal */
	{LCD_POWER_TYPE_MAX,   0,0,0,},  /* ending flag */
};
static struct lcd_power_step_s lcd_power_off_step_TL070WSH27[] = {
	{LCD_POWER_TYPE_SIGNAL,0,0,10,},  /* signal */
	{LCD_POWER_TYPE_CPU,   0,0,10,}, /* lcd_reset */
	{LCD_POWER_TYPE_CPU,   1,1,100,}, /* power off */
	{LCD_POWER_TYPE_MAX,   0,0,0,},   /* ending flag */
};

static unsigned char mipi_init_on_table[DSI_INIT_ON_MAX] = {//table size < 100
	0x05, 1, 0x11,
	0xfd, 1, 20,
	0x05, 1, 0x29,
	0xfd, 1, 20,
	0xff, 0,   //ending
};
static unsigned char mipi_init_off_table[DSI_INIT_OFF_MAX] = {//table size < 50
	0x05, 1, 0x28,
	0xfd, 1, 10,
	0x05, 1, 0x10,
	0xfd, 1, 10,
	0xff, 0,   //ending
};

static unsigned char mipi_init_on_table_P070ACB[DSI_INIT_ON_MAX] = {//table size < 100
	0xfd, 1, 10,
	0xf0, 3, 0, 1, 30, /* reset high, delay 30ms */
	0xf0, 3, 0, 0, 10, /* reset low, delay 10ms */
	0xf0, 3, 0, 1, 30, /* reset high, delay 30ms */
	0xfc, 2, 0x04, 3,  /* check_reg, check_cnt */
	0xff, 0,   //ending
};
static unsigned char mipi_init_off_table_P070ACB[DSI_INIT_OFF_MAX] = {//table size < 50
	0xff, 0,   //ending
};

static unsigned char mipi_init_on_table_TL050FHV02CT[DSI_INIT_ON_MAX] = {//table size < 100
	0xff, 0,   //ending
};
static unsigned char mipi_init_off_table_TL050FHV02CT[DSI_INIT_OFF_MAX] = {//table size < 50
	0xff, 0,   //ending
};

static unsigned char mipi_init_on_table_TL070WSH27[DSI_INIT_ON_MAX] = {//table size < 100
	0x05, 1, 0x11,
	0xfd, 1, 100,
	0x05, 1, 0x29,
	0xfd, 1, 20,
	0xff, 0,   //ending
};
static unsigned char mipi_init_off_table_TL070WSH27[DSI_INIT_OFF_MAX] = {//table size < 50
	0x05, 1, 0x28,
	0xfd, 1, 100,
	0x05, 1, 0x10,
	0xfd, 1, 10,
	0xff, 0,   //ending
};

static char lcd_bl_gpio[BL_GPIO_NUM_MAX][LCD_GPIO_NAME_MAX] = {
	"GPIOH_4", /* BL_EN */
	"GPIOH_5", /* BL_PWM */
	"invalid", /* ending flag */
};

struct ext_lcd_config_s ext_lcd_config[LCD_NUM_MAX] = {
	{/* B080XAN01*/
	"lcd_0",LCD_MIPI,8,
	/* basic timing */
	768,1024,948,1140,64,56,0,50,30,0,
	/* clk_attr */
	0,0,1,64843200,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,
	/* mipi_attr */
	4,550,0,1,0,2,1,0,Rsv_val,Rsv_val,
	/* cmd init */
	mipi_init_on_table, mipi_init_off_table,
	/* power step */
	lcd_power_on_step, lcd_power_off_step,
	/* backlight */
	100,255,10,128,128,
	BL_CTRL_PWM,0,1,0,200,200,
	BL_PWM_NEGATIVE,BL_PWM_F,180,100,25,1,1,
	Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,
	Rsv_val,Rsv_val,Rsv_val,Rsv_val,
	10,10,Rsv_val},

	{/* P070ACB_FT*/
	"lcd_1",LCD_MIPI,8,
	/* basic timing */
	600,1024,770,1070,10,80,0,6,20,0,
	/* clk_attr */
	0,0,1,49434000,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,
	/* mipi_attr */
	4,400,0,1,0,2,0,0,Rsv_val,1,
	/* cmd init */
	mipi_init_on_table_P070ACB, mipi_init_off_table_P070ACB,
	/* power step */
	lcd_power_on_step_P070ACB, lcd_power_off_step_P070ACB,
	/* backlight */
	100,255,10,128,128,
	BL_CTRL_PWM,0,1,0,200,200,
	BL_PWM_NEGATIVE,BL_PWM_F,180,100,25,1,1,
	Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,
	Rsv_val,Rsv_val,Rsv_val,Rsv_val,
	10,10,Rsv_val},

	{/* TL050FHV02CT*/
	"lcd_2",LCD_MIPI,8,
	/* basic timing */
	1080,1920,1125,2100,5,30,0,44,108,0,
	/* clk_attr */
	0,0,1,118125000,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,
	/* mipi_attr */
	4,960,0,1,0,2,1,0,Rsv_val,2,
	/* cmd init */
	mipi_init_on_table_TL050FHV02CT, mipi_init_off_table_TL050FHV02CT,
	/* power step */
	lcd_power_on_step_TL050FHV02CT, lcd_power_off_step_TL050FHV02CT,
	/* backlight */
	100,255,10,128,128,
	BL_CTRL_PWM,0,1,0,200,200,
	BL_PWM_NEGATIVE,BL_PWM_F,180,100,25,1,1,
	Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,
	Rsv_val,Rsv_val,Rsv_val,Rsv_val,
	10,10,Rsv_val},

	{/* TL070WSH27*/
	"lcd_3",LCD_MIPI,8,
	/* basic timing */
	1024,600,1250,630,80,100,0,5,20,0,
	/* clk_attr */
	0,0,1,47250000,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,
	/* mipi_attr */
	4,300,0,1,0,2,1,0,Rsv_val,Rsv_val,
	/* cmd init */
	mipi_init_on_table_TL070WSH27, mipi_init_off_table_TL070WSH27,
	/* power step */
	lcd_power_on_step_TL070WSH27, lcd_power_off_step_TL070WSH27,
	/* backlight */
	100,255,10,128,128,
	BL_CTRL_PWM,0,1,0,200,200,
	BL_PWM_NEGATIVE,BL_PWM_F,180,100,25,1,1,
	Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,
	Rsv_val,Rsv_val,Rsv_val,Rsv_val,
	10,10,Rsv_val},

	{.panel_type = "invalid"},
};

static struct lcd_pinmux_ctrl_s lcd_pinmux_ctrl[LCD_PINMX_MAX] = {
	{
		.name = "lcd_pin",
		.pinmux_set = {{LCD_PINMUX_END, 0x0}},
		.pinmux_clr = {{LCD_PINMUX_END, 0x0}},
	},
	{
		.name = "invalid",
	},
};

static struct lcd_pinmux_ctrl_s bl_pinmux_ctrl[BL_PINMUX_MAX] = {
	{
		.name = "bl_pwm_on_pin", //GPIOH_5
		.pinmux_set = {{11, 0x00400000}, {LCD_PINMUX_END, 0x0}},
		.pinmux_clr = {{11, 0x00f00000}, {LCD_PINMUX_END, 0x0}},
	},
	{
		.name = "invalid",
	},
};

#ifdef CONFIG_AML_BL_EXTERN
static unsigned char bl_ext_init_on[BL_EXTERN_INIT_ON_MAX] = {
	0xff, 0,   //ending flag
};
static unsigned char bl_ext_init_off[BL_EXTERN_INIT_OFF_MAX] = {
	0xff, 0,   //ending flag
};
#endif

/* **********************************************
 * driver struct, usually no need modify!
 * ********************************************** */
static struct dsi_config_s lcd_mipi_config = {
	.lane_num     = 4,
	.bit_rate_max = 1000, /* MHz */
	.factor_numerator   = 0,
	.factor_denominator = 100,
	.operation_mode_init    = 1, /* 0=video mode, 1=command mode */
	.operation_mode_display = 0, /* 0=video mode, 1=command mode */
	.video_mode_type = 2, /* 0=sync_pulse, 1=sync_event, 2=burst */
	.clk_always_hs   = 1, /* 0=disable, 1=enable */
	.phy_switch      = 0, /* 0=auto, 1=standard, 2=slow */

	.dsi_init_on  = mipi_init_on_table,
	.dsi_init_off = mipi_init_off_table,
	.extern_init  = 0xff, /* ext_index if needed, 0xff for invalid */
	.check_en     = 0,
	.check_state  = 0,
};

static struct lcd_power_ctrl_s lcd_power_ctrl = {
	.power_on_step = {
		{
			.type = LCD_POWER_TYPE_MAX, /* ending flag */
		},
	},
	.power_off_step = {
		{
			.type = LCD_POWER_TYPE_MAX, /* ending flag */
		},
	},
};

struct lcd_config_s lcd_config_dft = {
	.lcd_mode = LCD_MODE_TABLET,
	.lcd_key_valid = 0,
	.lcd_clk_path = 0,
	.lcd_basic = {
		.model_name = "default",
		.lcd_type = LCD_TYPE_MAX,
		.lcd_bits = 8,
		.h_active = 768,
		.v_active = 1024,
		.h_period = 948,
		.v_period = 1140,

		.screen_width   = 119,
		.screen_height  = 159,
	},

	.lcd_timing = {
		.clk_auto = 1,
		.lcd_clk = 64843200,
		.ss_level = 0,
		.fr_adjust_type = 0,

		.hsync_width = 64,
		.hsync_bp    = 56,
		.hsync_pol   = 0,
		.vsync_width = 50,
		.vsync_bp    = 30,
		.vsync_pol   = 0,
	},

	.lcd_control = {
		.mipi_config= &lcd_mipi_config,
	},
	.lcd_power = &lcd_power_ctrl,

	.pinctrl_ver = 2,
	.lcd_pinmux = lcd_pinmux_ctrl,
	.pinmux_set = {{LCD_PINMUX_END, 0x0}},
	.pinmux_clr = {{LCD_PINMUX_END, 0x0}},
};

#ifdef CONFIG_AML_LCD_EXTERN
struct lcd_extern_common_s ext_common_dft = {
	.lcd_ext_key_valid = 0,
	.i2c_bus = LCD_EXTERN_I2C_BUS_0, /* LCD_EXTERN_I2C_BUS_0/1/2/3/4 */
	.i2c_gpio_sck = LCD_EXT_I2C_GPIO_SCK,
	.i2c_gpio_sda = LCD_EXT_I2C_GPIO_SDA,
	.spi_gpio_cs = LCD_EXT_SPI_GPIO_CS,
	.spi_gpio_clk = LCD_EXT_SPI_GPIO_CLK,
	.spi_gpio_data = LCD_EXT_SPI_GPIO_DATA,

	.lcd_ext_pinmux = lcd_ext_pinmux_ctrl,
	.pinmux_set = {{LCD_PINMUX_END, 0x0}},
	.pinmux_clr = {{LCD_PINMUX_END, 0x0}},
	.pinmux_gpio_off = LCD_EXT_PINMUX_GPIO_OFF,
};

struct lcd_extern_config_s ext_config_dtf = {
	.index = 0,
	.name = "ext_default",
	.type = LCD_EXTERN_MAX, /* LCD_EXTERN_I2C, LCD_EXTERN_SPI, LCD_EXTERN_MIPI, LCD_EXTERN_MAX */
	.status = 0, /* 0=disable, 1=enable */
	.cmd_size = LCD_EXT_CMD_SIZE_DYNAMIC,
	.table_init_on = ext_init_on_table,
	.table_init_on_cnt = sizeof(ext_init_on_table),
	.table_init_off = ext_init_off_table,
	.table_init_off_cnt = sizeof(ext_init_off_table),
};
#endif

struct bl_config_s bl_config_dft = {
	.name = "default",
	.bl_key_valid = 0,

	.level_default = 100,
	.level_min = 10,
	.level_max = 255,
	.level_mid = 128,
	.level_mid_mapping = 128,
	.level = 0,

	.method = BL_CTRL_MAX,
	.power_on_delay = 200,
	.power_off_delay = 200,

	.en_gpio = 0xff,
	.en_gpio_on = 1,
	.en_gpio_off = 0,

	.bl_pwm = NULL,
	.bl_pwm_combo0 = NULL,
	.bl_pwm_combo1 = NULL,
	.pwm_on_delay = 10,
	.pwm_off_delay = 10,

	.bl_extern_index = 0xff,

	.pinctrl_ver = 2,
	.bl_pinmux = bl_pinmux_ctrl,
	.pinmux_set = {{LCD_PINMUX_END, 0x0}},
	.pinmux_clr = {{LCD_PINMUX_END, 0x0}},
};

#ifdef CONFIG_AML_BL_EXTERN
struct bl_extern_config_s bl_extern_config_dtf = {
	.index = BL_EXTERN_INDEX_INVALID,
	.name = "none",
	.type = BL_EXTERN_MAX,
	.i2c_addr = 0xff,
	.i2c_bus = BL_EXTERN_I2C_BUS_MAX,
	.dim_min = 10,
	.dim_max = 255,

	.init_loaded = 0,
	.cmd_size = 0xff,
	.init_on = bl_ext_init_on,
	.init_off = bl_ext_init_off,
	.init_on_cnt = sizeof(bl_ext_init_on),
	.init_off_cnt = sizeof(bl_ext_init_off),
};
#endif
/* ********************************************** */

void lcd_config_bsp_init(void)
{
	int i, j;
	char *str;
	struct ext_lcd_config_s *ext_lcd = NULL;

	/* init config, usually no need modify */
	for (i = 0; i < LCD_CPU_GPIO_NUM_MAX; i++) {
		if (strcmp(lcd_cpu_gpio[i], "invalid") == 0)
			break;
		strcpy(lcd_power_ctrl.cpu_gpio[i], lcd_cpu_gpio[i]);
	}
	for (j = i; j < LCD_CPU_GPIO_NUM_MAX; j++)
		strcpy(lcd_power_ctrl.cpu_gpio[j], "invalid");
	for (i = 0; i < BL_GPIO_NUM_MAX; i++) {
		if (strcmp(lcd_bl_gpio[i], "invalid") == 0)
			break;
		strcpy(bl_config_dft.gpio_name[i], lcd_bl_gpio[i]);
	}
	for (j = i; j < BL_GPIO_NUM_MAX; j++)
		strcpy(bl_config_dft.gpio_name[j], "invalid");

#ifdef CONFIG_AML_LCD_EXTERN
	for (i = 0; i < LCD_EXTERN_GPIO_NUM_MAX; i++) {
		if (strcmp(lcd_ext_gpio[i], "invalid") == 0)
			break;
		strcpy(ext_common_dft.gpio_name[i], lcd_ext_gpio[i]);
	}
	for (j = i; j < LCD_EXTERN_GPIO_NUM_MAX; j++)
		strcpy(ext_common_dft.gpio_name[j], "invalid");
#endif

	/* select special config */
	str = env_get("panel_type");
	if (str == NULL)
		return;
	for (i = 0 ; i < LCD_NUM_MAX ; i++) {
		ext_lcd = &ext_lcd_config[i];
		if (strcmp(ext_lcd->panel_type, str) == 0) {
#ifdef CONFIG_AML_LCD_EXTERN
			j = ext_lcd->if_attr_val9; /* mipi extern_index */
			if (j < sizeof(ext_config)/sizeof(struct lcd_extern_config_s)) {
				memcpy(&ext_config_dtf, &ext_config[j],
					sizeof(struct lcd_extern_config_s));
			}
#endif
			break;
		}
	}
}