/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Header file of storage interface module
 *
 * Copyright (C) 2018 Amlogic Corporation
 *
 * Licensed under the GPL-2 or later.
 *
 */

#ifndef __STORAGE_H__
#define __STORAGE_H__

#include <common.h>
#include <command.h>
#include <console.h>
#include <watchdog.h>
#include <malloc.h>
#include <asm/byteorder.h>
#include <jffs2/jffs2.h>

#define DISPROTECT_KEY			BIT(0)
#define DISPROTECT_SECURE		BIT(1)
#define DISPROTECT_FBBT			BIT(2)
#define DISPROTECT_HYNIX		BIT(3)

enum boot_type_e {
	BOOT_EMMC = 1,
	BOOT_SD = 1 << 1,
	BOOT_NAND_NFTL = 1 << 2,
	BOOT_NAND_MTD = 1 << 3,
	BOOT_SNAND = 1 << 4,/* spi nand */
	BOOT_SNOR = 1 << 5,/* spi nor */
	BOOT_NONE = 0xFF
};

#define RSV_KEY "key"
#define RSV_ENV "env"
#define RSV_DTB "dtb"
#define RSV_BBT "bbt"

#define DISCRETE_BOOTLOADER 1
#define COMPACT_BOOTLOADER 0

struct storage_info_t {
	u8 name[32];
	u8 id[8];
	u32 read_unit;
	u32 write_unit;
	u32 erase_unit;
	u64 caps;/* total size */
	u8 mode;/* bootloader mode, compact or  discrete */
};

struct storage_t {
	enum boot_type_e type;
	struct storage_info_t info;
	u32 init_flag;
	struct list_head list;
	/* when part_name is null, default to ops in whole chip */
	/* int (*block_is_bad)(const char *part_name, loff_t off); */
	u64 (*get_part_size)(const char *part_name);
	int (*read)(const char *part_name, loff_t off,
		    size_t size, void *dest);
	int (*write)(const char *part_name, loff_t off,
		     size_t size, const void *source);
	int (*erase)(const char *part_name, loff_t off,
		     size_t size, int scrub_flag);

#define BOOT_OPS_ALL 0xFF/* for cpy parameter operates all copies */
	u8 (*get_copies)(const char *part_name);
	u64 (*get_copy_size)(const char *part_name);
	int (*boot_read)(const char *part_name,
			 u8 cpy, size_t size, void *dest);
	int (*boot_write)(const char *part_name,
			  u8 cpy, size_t size, const void *source);
	int (*boot_erase)(const char *part_name, u8 cpy);

	u32 (*get_rsv_size)(const char *rsv_name);
	int (*read_rsv)(const char *rsv_name, size_t size, void *buf);
	int (*write_rsv)(const char *rsv_name, size_t size, void *buf);
	int (*erase_rsv)(const char *rsv_name);
	int (*protect_rsv)(const char *rsv_name,
			   bool ops);/*true:on false:off*/
};

struct device_node_t {
	enum boot_type_e index;
	char *type;
	int (*pre)(void);
	int (*probe)(u32 init_flag);
};

/**
 * we use a valid device list to manage the storage devices,
 * and every type of device can only exist ONE in this list.
 * we will scan and add the valid storage device to the list
 * in the init process, and of cause you can register the device
 * by you own.
 */
#define NAND_BOOT_NORMAL                0
#define NAND_BOOT_UPGRATE               1
#define NAND_BOOT_ERASE_PROTECT_CACHE   2
#define NAND_BOOT_ERASE_ALL             3
#define NAND_BOOT_SCRUB_ALL             4
#define NAND_SCAN_ID_INIT               5
/**
 * @usage: init all the valid storage device
 *
 * @init_flag: it's only works for MLC/EMMC driver
 * 0 NAND_BOOT_NORMAL:normal init, but can't operates the phy data area
 * 1 NAND_BOOT_UPGRATE:same as 0, but operation on phy data area is allowed
 * 2 NAND_BOOT_ERASE_PROTECT_CACHE:only erase rsv area
 * 3 NAND_BOOT_ERASE_ALL:erase whole device
 * 4 NAND_BOOT_SCRUB_ALL:erase whole device
 * 5 NAND_SCAN_ID_INIT:only read nand id
 *
 * @return: init result
 *          0 = success
 *          -1 = fail
 */
int store_init(u32 init_flag);

/**
 * @usage: register a storage device to the valid list
 *
 * @param: the description pointer of your storage device
 *
 * @return: registration result
 *          0 = success
 *          1 = fail
 */
int store_register(struct storage_t *store_dev);

/**
 * @usage: unregister a storage device from the valid list
 *
 * @store_dev: the description pointer of your storage device
 */
void store_unregister(struct storage_t *store_dev);

/**
 * @usage: check the type of device is valid on this board
 *
 * @type: the device type that you want to check
 *
 * @return: is the device valid
 *          0 = invalid
 *          1 = valid
 */
u8 store_device_valid(enum boot_type_e type);

/**
 * @usage: set the 'type' device as current device, and you can operates it
 *
 * @type: the device type that you want to set
 *
 * @return: result of the operation
 *          0 = success
 *          other = fail
 */
int store_set_device(enum boot_type_e type);

/**
 * @usage: get the type of current storage device
 *
 * @return: storage device type
 */
enum boot_type_e store_get_type(void);

/**
 * @usage: get information about the current device
 *
 * @info: the pointer for the information
 *
 * @return: result of the operation
 *          0 = success
 *          other = fail
 */
int store_get_device_info(struct storage_info_t *info);

/**
 * @usage: read data from storage device
 *
 * @name: partition name, when it's null the target
 *        will regards as whole device.
 * @off: offset to the 0 address of partition/device
 * @size: the amount of bytes to read
 * @buf: pointer of target buffer
 *
 * @return: result of the operation
 *          0 = success
 *          other = fail
 */
int store_read(const char *name, loff_t off, size_t size, void *buf);

/**
 * @usage: write data to storage device
 *
 * @name: partition name, when it's null the target
 *        will regards as whole device.
 * @off: offset to the 0 address of partition/device
 * @size: the amount of bytes to write
 * @buf: pointer of source buffer
 *
 * @return: result of the operation
 *          0 = success
 *          other = fail
 */
int store_write(const char *name, loff_t off, size_t size, const void *buf);

/**
 * @usage: erase the storage device
 *
 * @name: partition name, when it's null the target
 *        will regards as whole device.
 * @off: offset to the 0 address of partition/device
 * @size: the amount of bytes to erase
 * @scrub: scrub flag(scrub operates will works only when the device support)
 *          0 = no scrub, just erase
 *          1 = use scrub operates instead of erase
 * @return: result of the operation
 *          0 = success
 *          other = fail
 */
int store_erase(const char *name, loff_t off, size_t size, int scrub);

/**
 * @usage: get the partition size or capacity of device
 *
 * @name: partition name, when it's null the target
 *        will regards as whole device.
 *
 * @return: the amount of bytes to the partition or device size
 */
u64 store_part_size(const char *name);

/**
 * @usage: get the copy number of [name]
 *
 * @name: only can be "bl2" or "tpl"/"fip" in discrete mode
 *        be "bootloader" in compact mode
 * @return: the copy number of the "bootloader" or "tpl"
 */
u8 store_boot_copy_num(const char *name);

/**
 * @usage: get the copy size of [name]
 *
 * @name: name: only can be "bl2" or "tpl"/"fip" in discrete mode
 *        be "bootloader" in compact mode
 *
 * @return: the size of every copy
 */
u64 store_boot_copy_size(const char *name);

/**
 * @usage: read the [name] data from storage device
 *
 * @name: only can be "bl2" or "tpl"/"fip" in discrete mode
 *        be "bootloader" in compact mode
 * @copy: which copy you want read
 * @size: the amount of bytes to read
 * @buf: pointer of the target buffer
 *
 * @return: result of the operation
 *          0 = success
 *          other = fail
 */
int store_boot_read(const char *name, u8 copy, size_t size, void *buf);

/**
 * @usage: write the [name] data into storage device
 *
 * @name: only can be "bl2" or "tpl"/"fip" in discrete mode
 *        be "bootloader" in compact mode
 * @copy: which copy you want write,
 *        it will write to all copies when copy = BOOT_OPS_ALL
 * @size: the amount of bytes to write
 * @buf: pointer of the source buffer
 *
 * @return: result of the operation
 *          0 = success
 *          other = fail
 */
int store_boot_write(const char *name, u8 copy, size_t size, const void *buf);

/**
 * @usage: erase the [name] data
 *
 * @name: only can be "bl2" or "tpl"/"fip" in discrete mode
 *        be "bootloader" in compact mode
 * @copy: which copy you want erase,
 *        it will erase all copies when copy = BOOT_OPS_ALL
 *
 * @return: result of the operation
 *          0 = success
 *          other = fail
 */
int store_boot_erase(const char *name, u8 copy);

/**
 * @usage: get the rsv info size
 *
 * @name: rsv info name, please refer to
 *        RSV_KEY   "key"
 *        RSV_ENV   "env"
 *        RSV_DTB   "dtb"
 *        RSV_BBT   "bbt"
 *
 * @return: the amount bytes of the rsv info
 */
u32 store_rsv_size(const char *name);

/**
 * @usage: read the rsv info from storage device
 *
 * @name: rsv info name, please refer to
 *        RSV_KEY   "key"
 *        RSV_ENV   "env"
 *        RSV_DTB   "dtb"
 *        RSV_BBT   "bbt"
 * @size: the amount of bytes to read
 * @buf: pointer of the target buffer
 *
 * @return: result of the operation
 *          0 = success
 *          other = fail
 */
int store_rsv_read(const char *name, size_t size, void *buf);

/**
 * @usage: write the rsv info to the storage device
 *
 * @name: rsv info name, please refer to
 *        RSV_KEY   "key"
 *        RSV_ENV   "env"
 *        RSV_DTB   "dtb"
 *        RSV_BBT   "bbt"
 * @size: the amount of bytes to write
 * @buf: pointer of the source buffer
 *
 * @return: result of the operation
 *          0 = success
 *          other = fail
 */
int store_rsv_write(const char *name, size_t size, void *buf);

/**
 * @usage: erase the rsv info
 *
 * @name: rsv info name, please refer to
 *        RSV_KEY   "key"
 *        RSV_ENV   "env"
 *        RSV_DTB   "dtb"
 *        RSV_BBT   "bbt"
 *        it will erase all reserve information
 *        when name is null
 *
 * @return: result of the operation
 *          0 = success
 *          other = fail
 */
int store_rsv_erase(const char *name);

/**
 * @usage: turn on/off the protection of rsv info
 *
 * @name: rsv info name, please refer to
 *        RSV_KEY   "key"
 *        RSV_ENV   "env"
 *        RSV_DTB   "dtb"
 *        RSV_BBT   "bbt"
 *        it will operates all reserve information
 *        when name is null
 * @ops: turn on/off the rsv info protection
 *       true = turn on the protection
 *       flase = turn off the protection
 *
 * @return: result of the operation
 *          0 = success
 *          other = fail
 */
int store_rsv_protect(const char *name, bool ops);
#endif/* __STORAGE_H__ */