/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2009 Samsung Electronics
 * Minkyu Kang <mk7.kang@samsung.com>
 * HeungJun Kim <riverful.kim@samsung.com>
 * Inki Dae <inki.dae@samsung.com>
 *
 * Configuation settings for the SAMSUNG SMDKC100 board.
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_SAMSUNG		1	/* in a SAMSUNG core */
#define CONFIG_S5P		1	/* which is in a S5P Family */
#define CONFIG_S5PC100		1	/* which is in a S5PC100 */

#include <asm/arch/cpu.h>		/* get chip and board defs */

#define CONFIG_ARCH_CPU_INIT

/* input clock of PLL: SMDKC100 has 12MHz input clock */
#define CONFIG_SYS_CLK_FREQ		12000000

/* DRAM Base */
#define CONFIG_SYS_SDRAM_BASE		0x30000000

/* Text Base */

#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG

/*
 * Size of malloc() pool
 * 1MB = 0x100000, 0x100000 = 1024 * 1024
 */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))

/*
 * select serial console configuration
 */
#define CONFIG_SERIAL0			1	/* use SERIAL 0 on SMDKC100 */

/* PWM */
#define CONFIG_PWM			1

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS

#define CONFIG_BOOTCOMMAND	"run ubifsboot"

#define CONFIG_RAMDISK_BOOT	"root=/dev/ram0 rw rootfstype=ext2" \
				" console=ttySAC0,115200n8" \
				" mem=128M"

#define CONFIG_COMMON_BOOT	"console=ttySAC0,115200n8" \
				" mem=128M " \
				" " CONFIG_MTDPARTS_DEFAULT

#define CONFIG_UPDATEB	"updateb=onenand erase 0x0 0x40000;" \
			" onenand write 0x32008000 0x0 0x40000\0"

#define CONFIG_ENV_OVERWRITE
#define CONFIG_EXTRA_ENV_SETTINGS					\
	CONFIG_UPDATEB \
	"updatek=" \
		"onenand erase 0x60000 0x300000;" \
		"onenand write 0x31008000 0x60000 0x300000\0" \
	"updateu=" \
		"onenand erase block 147-4095;" \
		"onenand write 0x32000000 0x1260000 0x8C0000\0" \
	"bootk=" \
		"onenand read 0x30007FC0 0x60000 0x300000;" \
		"bootm 0x30007FC0\0" \
	"flashboot=" \
		"set bootargs root=/dev/mtdblock${bootblock} " \
		"rootfstype=${rootfstype} " \
		"ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT ";" \
		"run bootk\0" \
	"ubifsboot=" \
		"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
		" ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT "; " \
		"run bootk\0" \
	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
	"android=" \
		"set bootargs root=ubi0!ramdisk ubi.mtd=${ubiblock} " \
		"rootfstype=ubifs init=/init.sh " CONFIG_COMMON_BOOT "; " \
		"run bootk\0" \
	"nfsboot=" \
		"set bootargs root=/dev/nfs ubi.mtd=${ubiblock} " \
		"nfsroot=${nfsroot},nolock " \
		"ip=${ipaddr}:${serverip}:${gatewayip}:" \
		"${netmask}:nowplus:usb0:off " CONFIG_COMMON_BOOT "; " \
		"run bootk\0" \
	"ramboot=" \
		"set bootargs " CONFIG_RAMDISK_BOOT \
		" initrd=0x33000000,8M ramdisk=8192\0" \
	"rootfstype=cramfs\0" \
	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
	"meminfo=mem=128M\0" \
	"nfsroot=/nfsroot/arm\0" \
	"bootblock=5\0" \
	"ubiblock=4\0" \
	"ubi=enabled"

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_PBSIZE	384	/* Print Buffer Size */
/* memtest works on */
#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5e00000)
#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE

/* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */
#define CONFIG_NR_DRAM_BANKS	1
#define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE	/* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE	(128 << 20)	/* 0x8000000, 128 MB Bank #1 */

#define CONFIG_SYS_MONITOR_BASE	0x00000000

/*-----------------------------------------------------------------------
 * FLASH and environment organization
 */

#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* 256 KiB */

#if !defined(CONFIG_NAND_SPL) && (CONFIG_SYS_TEXT_BASE >= 0xc0000000)
#define CONFIG_ENABLE_MMU
#endif

#ifdef CONFIG_ENABLE_MMU
#define CONFIG_SYS_MAPPED_RAM_BASE	0xc0000000
#else
#define CONFIG_SYS_MAPPED_RAM_BASE	CONFIG_SYS_SDRAM_BASE
#endif

/*-----------------------------------------------------------------------
 * Boot configuration
 */
#define CONFIG_ENV_SIZE			(128 << 10)	/* 128KiB, 0x20000 */
#define CONFIG_ENV_ADDR			(256 << 10)	/* 256KiB, 0x40000 */
#define CONFIG_ENV_OFFSET		(256 << 10)	/* 256KiB, 0x40000 */

#define CONFIG_USE_ONENAND_BOARD_INIT
#define CONFIG_SAMSUNG_ONENAND		1
#define CONFIG_SYS_ONENAND_BASE		0xE7100000

#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - 0x1000000)

/*
 * Ethernet Contoller driver
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_ENV_SROM_BANK   3       /* Select SROM Bank-3 for Ethernet*/
#endif /* CONFIG_CMD_NET */

#endif	/* __CONFIG_H */