# SPDX-License-Identifier: GPL-2.0+
# Copyright (c) 2013 The Chromium OS Authors.

(Please read 'How to change from MAKEALL' if you are used to that tool)

Quick-start
===========

If you just want to quickly set up buildman so you can build something (for
example Raspberry Pi 2):

   cd /path/to/u-boot
   PATH=$PATH:`pwd`/tools/buildman
   buildman --fetch-arch arm
   buildman -k rpi_2
   ls ../current/rpi_2
   # u-boot.bin is the output image


What is this?
=============

This tool handles building U-Boot to check that you have not broken it
with your patch series. It can build each individual commit and report
which boards fail on which commits, and which errors come up. It aims
to make full use of multi-processor machines.

A key feature of buildman is its output summary, which allows warnings,
errors or image size increases in a particular commit or board to be
quickly identified and the offending commit pinpointed. This can be a big
help for anyone working with >10 patches at a time.


Caveats
=======

Buildman can be stopped and restarted, in which case it will continue
where it left off. This should happen cleanly and without side-effects.
If not, it is a bug, for which a patch would be welcome.

Buildman gets so tied up in its work that it can ignore the outside world.
You may need to press Ctrl-C several times to quit it. Also it will print
out various exceptions when stopped. You may have to kill it since the
Ctrl-C handling is somewhat broken.


Theory of Operation
===================

(please read this section in full twice or you will be perpetually confused)

Buildman is a builder. It is not make, although it runs make. It does not
produce any useful output on the terminal while building, except for
progress information (except with -v, see below). All the output (errors,
warnings and binaries if you ask for them) is stored in output
directories, which you can look at while the build is progressing, or when
it is finished.

Buildman is designed to build entire git branches, i.e. muliple commits. It
can be run repeatedly on the same branch. In this case it will automatically
rebuild commits which have changed (and remove its old results for that
commit). It is possible to build a branch for one board, then later build it
for another board. If you want buildman to re-build a commit it has already
built (e.g. because of a toolchain update), use the -f flag.

Buildman produces a concise summary of which boards succeeded and failed.
It shows which commit introduced which board failure using a simple
red/green colour coding. Full error information can be requested, in which
case it is de-duped and displayed against the commit that introduced the
error. An example workflow is below.

Buildman stores image size information and can report changes in image size
from commit to commit. An example of this is below.

Buildman starts multiple threads, and each thread builds for one board at
a time. A thread starts at the first commit, configures the source for your
board and builds it. Then it checks out the next commit and does an
incremental build. Eventually the thread reaches the last commit and stops.
If errors or warnings are found along the way, the thread will reconfigure
after every commit, and your build will be very slow. This is because a
file that produces just a warning would not normally be rebuilt in an
incremental build.

Buildman works in an entirely separate place from your U-Boot repository.
It creates a separate working directory for each thread, and puts the
output files in the working directory, organised by commit name and board
name, in a two-level hierarchy.

Buildman is invoked in your U-Boot directory, the one with the .git
directory. It clones this repository into a copy for each thread, and the
threads do not affect the state of your git repository. Any checkouts done
by the thread affect only the working directory for that thread.

Buildman automatically selects the correct tool chain for each board. You
must supply suitable tool chains, but buildman takes care of selecting the
right one.

Buildman generally builds a branch (with the -b flag), and in this case
builds the upstream commit as well, for comparison. It cannot build
individual commits at present, unless (maybe) you point it at an empty
branch. Put all your commits in a branch, set the branch's upstream to a
valid value, and all will be well. Otherwise buildman will perform random
actions. Use -n to check what the random actions might be.

If you just want to build the current source tree, leave off the -b flag
and add -e. This will display results and errors as they happen. You can
still look at them later using -se. Note that buildman will assume that the
source has changed, and will build all specified boards in this case.

Buildman is optimised for building many commits at once, for many boards.
On multi-core machines, Buildman is fast because it uses most of the
available CPU power. When it gets to the end, or if you are building just
a few commits or boards, it will be pretty slow. As a tip, if you don't
plan to use your machine for anything else, you can use -T to increase the
number of threads beyond the default.

Buildman lets you build all boards, or a subset. Specify the subset by passing
command-line arguments that list the desired board name, architecture name,
SOC name, or anything else in the boards.cfg file. Multiple arguments are
allowed. Each argument will be interpreted as a regular expression, so
behaviour is a superset of exact or substring matching. Examples are:

* 'tegra20'      All boards with a Tegra20 SoC
* 'tegra'        All boards with any Tegra Soc (Tegra20, Tegra30, Tegra114...)
* '^tegra[23]0$' All boards with either Tegra20 or Tegra30 SoC
* 'powerpc'      All PowerPC boards

While the default is to OR the terms together, you can also make use of
the '&' operator to limit the selection:

* 'freescale & arm sandbox'  All Freescale boards with ARM architecture,
                             plus sandbox

You can also use -x to specifically exclude some boards. For example:

 buildmand arm -x nvidia,freescale,.*ball$

means to build all arm boards except nvidia, freescale and anything ending
with 'ball'.

It is convenient to use the -n option to see what will be built based on
the subset given. Use -v as well to get an actual list of boards.

Buildman does not store intermediate object files. It optionally copies
the binary output into a directory when a build is successful. Size
information is always recorded. It needs a fair bit of disk space to work,
typically 250MB per thread.


Setting up
==========

1. Get the U-Boot source. You probably already have it, but if not these
steps should get you started with a repo and some commits for testing.

$ cd /path/to/u-boot
$ git clone git://git.denx.de/u-boot.git .
$ git checkout -b my-branch origin/master
$ # Add some commits to the branch, reading for testing

2. Create ~/.buildman to tell buildman where to find tool chains (see 'The
.buildman file' later for details). As an example:

# Buildman settings file

[toolchain]
root: /
rest: /toolchains/*
eldk: /opt/eldk-4.2
arm: /opt/linaro/gcc-linaro-arm-linux-gnueabihf-4.8-2013.08_linux
aarch64: /opt/linaro/gcc-linaro-aarch64-none-elf-4.8-2013.10_linux

[toolchain-alias]
x86: i386
blackfin: bfin
nds32: nds32le
openrisc: or1k


This selects the available toolchain paths. Add the base directory for
each of your toolchains here. Buildman will search inside these directories
and also in any '/usr' and '/usr/bin' subdirectories.

Make sure the tags (here root: rest: and eldk:) are unique.

The toolchain-alias section indicates that the i386 toolchain should be used
to build x86 commits.

Note that you can also specific exactly toolchain prefixes if you like:

[toolchain-prefix]
arm: /opt/arm-eabi-4.6/bin/arm-eabi-

or even:

[toolchain-prefix]
arm: /opt/arm-eabi-4.6/bin/arm-eabi-gcc

This tells buildman that you want to use this exact toolchain for the arm
architecture. This will override any toolchains found by searching using the
[toolchain] settings.

Since the toolchain prefix is an explicit request, buildman will report an
error if a toolchain is not found with that prefix. The current PATH will be
searched, so it is possible to use:

[toolchain-prefix]
arm: arm-none-eabi-

and buildman will find arm-none-eabi-gcc in /usr/bin if you have it installed.

[toolchain-wrapper]
wrapper: ccache

This tells buildman to use a compiler wrapper in front of CROSS_COMPILE. In
this example, ccache. It doesn't affect the toolchain scan. The wrapper is
added when CROSS_COMPILE environtal variable is set. The name in this
section is ignored. If more than one line is provided, only the last one
is taken.

3. Make sure you have the require Python pre-requisites

Buildman uses multiprocessing, Queue, shutil, StringIO, ConfigParser and
urllib2. These should normally be available, but if you get an error like
this then you will need to obtain those modules:

    ImportError: No module named multiprocessing


4. Check the available toolchains

Run this check to make sure that you have a toolchain for every architecture.

$ ./tools/buildman/buildman --list-tool-chains
Scanning for tool chains
   - scanning prefix '/opt/gcc-4.6.3-nolibc/x86_64-linux/bin/x86_64-linux-'
Tool chain test:  OK, arch='x86', priority 1
   - scanning prefix '/opt/arm-eabi-4.6/bin/arm-eabi-'
Tool chain test:  OK, arch='arm', priority 1
   - scanning path '/toolchains/gcc-4.9.0-nolibc/i386-linux'
      - looking in '/toolchains/gcc-4.9.0-nolibc/i386-linux/.'
      - looking in '/toolchains/gcc-4.9.0-nolibc/i386-linux/bin'
         - found '/toolchains/gcc-4.9.0-nolibc/i386-linux/bin/i386-linux-gcc'
      - looking in '/toolchains/gcc-4.9.0-nolibc/i386-linux/usr/bin'
Tool chain test:  OK, arch='i386', priority 4
   - scanning path '/toolchains/gcc-4.9.0-nolibc/aarch64-linux'
      - looking in '/toolchains/gcc-4.9.0-nolibc/aarch64-linux/.'
      - looking in '/toolchains/gcc-4.9.0-nolibc/aarch64-linux/bin'
         - found '/toolchains/gcc-4.9.0-nolibc/aarch64-linux/bin/aarch64-linux-gcc'
      - looking in '/toolchains/gcc-4.9.0-nolibc/aarch64-linux/usr/bin'
Tool chain test:  OK, arch='aarch64', priority 4
   - scanning path '/toolchains/gcc-4.9.0-nolibc/microblaze-linux'
      - looking in '/toolchains/gcc-4.9.0-nolibc/microblaze-linux/.'
      - looking in '/toolchains/gcc-4.9.0-nolibc/microblaze-linux/bin'
         - found '/toolchains/gcc-4.9.0-nolibc/microblaze-linux/bin/microblaze-linux-gcc'
      - looking in '/toolchains/gcc-4.9.0-nolibc/microblaze-linux/usr/bin'
Tool chain test:  OK, arch='microblaze', priority 4
   - scanning path '/toolchains/gcc-4.9.0-nolibc/mips64-linux'
      - looking in '/toolchains/gcc-4.9.0-nolibc/mips64-linux/.'
      - looking in '/toolchains/gcc-4.9.0-nolibc/mips64-linux/bin'
         - found '/toolchains/gcc-4.9.0-nolibc/mips64-linux/bin/mips64-linux-gcc'
      - looking in '/toolchains/gcc-4.9.0-nolibc/mips64-linux/usr/bin'
Tool chain test:  OK, arch='mips64', priority 4
   - scanning path '/toolchains/gcc-4.9.0-nolibc/sparc64-linux'
      - looking in '/toolchains/gcc-4.9.0-nolibc/sparc64-linux/.'
      - looking in '/toolchains/gcc-4.9.0-nolibc/sparc64-linux/bin'
         - found '/toolchains/gcc-4.9.0-nolibc/sparc64-linux/bin/sparc64-linux-gcc'
      - looking in '/toolchains/gcc-4.9.0-nolibc/sparc64-linux/usr/bin'
Tool chain test:  OK, arch='sparc64', priority 4
   - scanning path '/toolchains/gcc-4.9.0-nolibc/arm-unknown-linux-gnueabi'
      - looking in '/toolchains/gcc-4.9.0-nolibc/arm-unknown-linux-gnueabi/.'
      - looking in '/toolchains/gcc-4.9.0-nolibc/arm-unknown-linux-gnueabi/bin'
         - found '/toolchains/gcc-4.9.0-nolibc/arm-unknown-linux-gnueabi/bin/arm-unknown-linux-gnueabi-gcc'
      - looking in '/toolchains/gcc-4.9.0-nolibc/arm-unknown-linux-gnueabi/usr/bin'
Tool chain test:  OK, arch='arm', priority 3
Toolchain '/toolchains/gcc-4.9.0-nolibc/arm-unknown-linux-gnueabi/bin/arm-unknown-linux-gnueabi-gcc' at priority 3 will be ignored because another toolchain for arch 'arm' has priority 1
   - scanning path '/toolchains/gcc-4.9.0-nolibc/sparc-linux'
      - looking in '/toolchains/gcc-4.9.0-nolibc/sparc-linux/.'
      - looking in '/toolchains/gcc-4.9.0-nolibc/sparc-linux/bin'
         - found '/toolchains/gcc-4.9.0-nolibc/sparc-linux/bin/sparc-linux-gcc'
      - looking in '/toolchains/gcc-4.9.0-nolibc/sparc-linux/usr/bin'
Tool chain test:  OK, arch='sparc', priority 4
   - scanning path '/toolchains/gcc-4.9.0-nolibc/mips-linux'
      - looking in '/toolchains/gcc-4.9.0-nolibc/mips-linux/.'
      - looking in '/toolchains/gcc-4.9.0-nolibc/mips-linux/bin'
         - found '/toolchains/gcc-4.9.0-nolibc/mips-linux/bin/mips-linux-gcc'
      - looking in '/toolchains/gcc-4.9.0-nolibc/mips-linux/usr/bin'
Tool chain test:  OK, arch='mips', priority 4
   - scanning path '/toolchains/gcc-4.9.0-nolibc/x86_64-linux'
      - looking in '/toolchains/gcc-4.9.0-nolibc/x86_64-linux/.'
      - looking in '/toolchains/gcc-4.9.0-nolibc/x86_64-linux/bin'
         - found '/toolchains/gcc-4.9.0-nolibc/x86_64-linux/bin/x86_64-linux-gcc'
         - found '/toolchains/gcc-4.9.0-nolibc/x86_64-linux/bin/x86_64-linux-x86_64-linux-gcc'
      - looking in '/toolchains/gcc-4.9.0-nolibc/x86_64-linux/usr/bin'
Tool chain test:  OK, arch='x86_64', priority 4
Tool chain test:  OK, arch='x86_64', priority 4
Toolchain '/toolchains/gcc-4.9.0-nolibc/x86_64-linux/bin/x86_64-linux-x86_64-linux-gcc' at priority 4 will be ignored because another toolchain for arch 'x86_64' has priority 4
   - scanning path '/toolchains/gcc-4.9.0-nolibc/m68k-linux'
      - looking in '/toolchains/gcc-4.9.0-nolibc/m68k-linux/.'
      - looking in '/toolchains/gcc-4.9.0-nolibc/m68k-linux/bin'
         - found '/toolchains/gcc-4.9.0-nolibc/m68k-linux/bin/m68k-linux-gcc'
      - looking in '/toolchains/gcc-4.9.0-nolibc/m68k-linux/usr/bin'
Tool chain test:  OK, arch='m68k', priority 4
   - scanning path '/toolchains/gcc-4.9.0-nolibc/powerpc-linux'
      - looking in '/toolchains/gcc-4.9.0-nolibc/powerpc-linux/.'
      - looking in '/toolchains/gcc-4.9.0-nolibc/powerpc-linux/bin'
         - found '/toolchains/gcc-4.9.0-nolibc/powerpc-linux/bin/powerpc-linux-gcc'
      - looking in '/toolchains/gcc-4.9.0-nolibc/powerpc-linux/usr/bin'
Tool chain test:  OK, arch='powerpc', priority 4
   - scanning path '/toolchains/gcc-4.6.3-nolibc/bfin-uclinux'
      - looking in '/toolchains/gcc-4.6.3-nolibc/bfin-uclinux/.'
      - looking in '/toolchains/gcc-4.6.3-nolibc/bfin-uclinux/bin'
         - found '/toolchains/gcc-4.6.3-nolibc/bfin-uclinux/bin/bfin-uclinux-gcc'
      - looking in '/toolchains/gcc-4.6.3-nolibc/bfin-uclinux/usr/bin'
Tool chain test:  OK, arch='bfin', priority 6
   - scanning path '/toolchains/gcc-4.6.3-nolibc/sparc-linux'
      - looking in '/toolchains/gcc-4.6.3-nolibc/sparc-linux/.'
      - looking in '/toolchains/gcc-4.6.3-nolibc/sparc-linux/bin'
         - found '/toolchains/gcc-4.6.3-nolibc/sparc-linux/bin/sparc-linux-gcc'
      - looking in '/toolchains/gcc-4.6.3-nolibc/sparc-linux/usr/bin'
Tool chain test:  OK, arch='sparc', priority 4
Toolchain '/toolchains/gcc-4.6.3-nolibc/sparc-linux/bin/sparc-linux-gcc' at priority 4 will be ignored because another toolchain for arch 'sparc' has priority 4
   - scanning path '/toolchains/gcc-4.6.3-nolibc/mips-linux'
      - looking in '/toolchains/gcc-4.6.3-nolibc/mips-linux/.'
      - looking in '/toolchains/gcc-4.6.3-nolibc/mips-linux/bin'
         - found '/toolchains/gcc-4.6.3-nolibc/mips-linux/bin/mips-linux-gcc'
      - looking in '/toolchains/gcc-4.6.3-nolibc/mips-linux/usr/bin'
Tool chain test:  OK, arch='mips', priority 4
Toolchain '/toolchains/gcc-4.6.3-nolibc/mips-linux/bin/mips-linux-gcc' at priority 4 will be ignored because another toolchain for arch 'mips' has priority 4
   - scanning path '/toolchains/gcc-4.6.3-nolibc/m68k-linux'
      - looking in '/toolchains/gcc-4.6.3-nolibc/m68k-linux/.'
      - looking in '/toolchains/gcc-4.6.3-nolibc/m68k-linux/bin'
         - found '/toolchains/gcc-4.6.3-nolibc/m68k-linux/bin/m68k-linux-gcc'
      - looking in '/toolchains/gcc-4.6.3-nolibc/m68k-linux/usr/bin'
Tool chain test:  OK, arch='m68k', priority 4
Toolchain '/toolchains/gcc-4.6.3-nolibc/m68k-linux/bin/m68k-linux-gcc' at priority 4 will be ignored because another toolchain for arch 'm68k' has priority 4
   - scanning path '/toolchains/gcc-4.6.3-nolibc/powerpc-linux'
      - looking in '/toolchains/gcc-4.6.3-nolibc/powerpc-linux/.'
      - looking in '/toolchains/gcc-4.6.3-nolibc/powerpc-linux/bin'
         - found '/toolchains/gcc-4.6.3-nolibc/powerpc-linux/bin/powerpc-linux-gcc'
      - looking in '/toolchains/gcc-4.6.3-nolibc/powerpc-linux/usr/bin'
Tool chain test:  OK, arch='powerpc', priority 4
Tool chain test:  OK, arch='or32', priority 4
   - scanning path '/'
      - looking in '/.'
      - looking in '/bin'
      - looking in '/usr/bin'
         - found '/usr/bin/i586-mingw32msvc-gcc'
         - found '/usr/bin/c89-gcc'
         - found '/usr/bin/x86_64-linux-gnu-gcc'
         - found '/usr/bin/gcc'
         - found '/usr/bin/c99-gcc'
         - found '/usr/bin/arm-linux-gnueabi-gcc'
         - found '/usr/bin/aarch64-linux-gnu-gcc'
         - found '/usr/bin/winegcc'
         - found '/usr/bin/arm-linux-gnueabihf-gcc'
Tool chain test:  OK, arch='i586', priority 11
Tool chain test:  OK, arch='c89', priority 11
Tool chain test:  OK, arch='x86_64', priority 4
Toolchain '/usr/bin/x86_64-linux-gnu-gcc' at priority 4 will be ignored because another toolchain for arch 'x86_64' has priority 4
Tool chain test:  OK, arch='sandbox', priority 11
Tool chain test:  OK, arch='c99', priority 11
Tool chain test:  OK, arch='arm', priority 4
Toolchain '/usr/bin/arm-linux-gnueabi-gcc' at priority 4 will be ignored because another toolchain for arch 'arm' has priority 1
Tool chain test:  OK, arch='aarch64', priority 4
Toolchain '/usr/bin/aarch64-linux-gnu-gcc' at priority 4 will be ignored because another toolchain for arch 'aarch64' has priority 4
Tool chain test:  OK, arch='sandbox', priority 11
Toolchain '/usr/bin/winegcc' at priority 11 will be ignored because another toolchain for arch 'sandbox' has priority 11
Tool chain test:  OK, arch='arm', priority 4
Toolchain '/usr/bin/arm-linux-gnueabihf-gcc' at priority 4 will be ignored because another toolchain for arch 'arm' has priority 1
List of available toolchains (34):
aarch64   : /toolchains/gcc-4.9.0-nolibc/aarch64-linux/bin/aarch64-linux-gcc
alpha     : /toolchains/gcc-4.9.0-nolibc/alpha-linux/bin/alpha-linux-gcc
am33_2.0  : /toolchains/gcc-4.9.0-nolibc/am33_2.0-linux/bin/am33_2.0-linux-gcc
arm       : /opt/arm-eabi-4.6/bin/arm-eabi-gcc
bfin      : /toolchains/gcc-4.6.3-nolibc/bfin-uclinux/bin/bfin-uclinux-gcc
c89       : /usr/bin/c89-gcc
c99       : /usr/bin/c99-gcc
frv       : /toolchains/gcc-4.9.0-nolibc/frv-linux/bin/frv-linux-gcc
h8300     : /toolchains/gcc-4.9.0-nolibc/h8300-elf/bin/h8300-elf-gcc
hppa      : /toolchains/gcc-4.9.0-nolibc/hppa-linux/bin/hppa-linux-gcc
hppa64    : /toolchains/gcc-4.9.0-nolibc/hppa64-linux/bin/hppa64-linux-gcc
i386      : /toolchains/gcc-4.9.0-nolibc/i386-linux/bin/i386-linux-gcc
i586      : /usr/bin/i586-mingw32msvc-gcc
ia64      : /toolchains/gcc-4.9.0-nolibc/ia64-linux/bin/ia64-linux-gcc
m32r      : /toolchains/gcc-4.9.0-nolibc/m32r-linux/bin/m32r-linux-gcc
m68k      : /toolchains/gcc-4.9.0-nolibc/m68k-linux/bin/m68k-linux-gcc
microblaze: /toolchains/gcc-4.9.0-nolibc/microblaze-linux/bin/microblaze-linux-gcc
mips      : /toolchains/gcc-4.9.0-nolibc/mips-linux/bin/mips-linux-gcc
mips64    : /toolchains/gcc-4.9.0-nolibc/mips64-linux/bin/mips64-linux-gcc
or32      : /toolchains/gcc-4.5.1-nolibc/or32-linux/bin/or32-linux-gcc
powerpc   : /toolchains/gcc-4.9.0-nolibc/powerpc-linux/bin/powerpc-linux-gcc
powerpc64 : /toolchains/gcc-4.9.0-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc
ppc64le   : /toolchains/gcc-4.9.0-nolibc/ppc64le-linux/bin/ppc64le-linux-gcc
s390x     : /toolchains/gcc-4.9.0-nolibc/s390x-linux/bin/s390x-linux-gcc
sandbox   : /usr/bin/gcc
sh4       : /toolchains/gcc-4.6.3-nolibc/sh4-linux/bin/sh4-linux-gcc
sparc     : /toolchains/gcc-4.9.0-nolibc/sparc-linux/bin/sparc-linux-gcc
sparc64   : /toolchains/gcc-4.9.0-nolibc/sparc64-linux/bin/sparc64-linux-gcc
tilegx    : /toolchains/gcc-4.6.2-nolibc/tilegx-linux/bin/tilegx-linux-gcc
x86       : /opt/gcc-4.6.3-nolibc/x86_64-linux/bin/x86_64-linux-gcc
x86_64    : /toolchains/gcc-4.9.0-nolibc/x86_64-linux/bin/x86_64-linux-gcc


You can see that everything is covered, even some strange ones that won't
be used (c88 and c99). This is a feature.


5. Install new toolchains if needed

You can download toolchains and update the [toolchain] section of the
settings file to find them.

To make this easier, buildman can automatically download and install
toolchains from kernel.org. First list the available architectures:

$ ./tools/buildman/buildman --fetch-arch list
Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.3/
Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.2/
Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.5.1/
Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.2.4/
Available architectures: alpha am33_2.0 arm bfin cris crisv32 frv h8300
hppa hppa64 i386 ia64 m32r m68k mips mips64 or32 powerpc powerpc64 s390x sh4
sparc sparc64 tilegx x86_64 xtensa

Then pick one and download it:

$ ./tools/buildman/buildman --fetch-arch or32
Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.3/
Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.2/
Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.5.1/
Downloading: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.5.1//x86_64-gcc-4.5.1-nolibc_or32-linux.tar.xz
Unpacking to: /home/sjg/.buildman-toolchains
Testing
      - looking in '/home/sjg/.buildman-toolchains/gcc-4.5.1-nolibc/or32-linux/.'
      - looking in '/home/sjg/.buildman-toolchains/gcc-4.5.1-nolibc/or32-linux/bin'
         - found '/home/sjg/.buildman-toolchains/gcc-4.5.1-nolibc/or32-linux/bin/or32-linux-gcc'
Tool chain test:  OK

Or download them all from kernel.org and move them to /toolchains directory,

$ ./tools/buildman/buildman --fetch-arch all
$ sudo mkdir -p /toolchains
$ sudo mv ~/.buildman-toolchains/*/* /toolchains/

For those not available from kernel.org, download from the following links.

arc: https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/
    download/arc-2016.09-release/arc_gnu_2016.09_prebuilt_uclibc_le_archs_linux_install.tar.gz
blackfin: http://sourceforge.net/projects/adi-toolchain/files/
    blackfin-toolchain-elf-gcc-4.5-2014R1_45-RC2.x86_64.tar.bz2
nds32: http://osdk.andestech.com/packages/
    nds32le-linux-glibc-v1.tgz
nios2: http://sourcery.mentor.com/public/gnu_toolchain/nios2-linux-gnu/
    sourceryg++-2015.11-27-nios2-linux-gnu-i686-pc-linux-gnu.tar.bz2
sh: http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu/
    renesas-4.4-200-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2

Note openrisc kernel.org toolchain is out of date. Download the latest one from
http://opencores.org/or1k/OpenRISC_GNU_tool_chain#Prebuilt_versions - eg:
ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/gcc-or1k-elf-4.8.1-x86.tar.bz2.

Buildman should now be set up to use your new toolchain.

At the time of writing, U-Boot has these architectures:

   arc, arm, blackfin, m68k, microblaze, mips, nds32, nios2, openrisc
   powerpc, sandbox, sh, sparc, x86

Of these, only arc and nds32 are not available at kernel.org..


How to run it
=============

First do a dry run using the -n flag: (replace <branch> with a real, local
branch with a valid upstream)

$ ./tools/buildman/buildman -b <branch> -n

If it can't detect the upstream branch, try checking out the branch, and
doing something like 'git branch --set-upstream-to upstream/master'
or something similar. Buildman will try to guess a suitable upstream branch
if it can't find one (you will see a message like" Guessing upstream as ...).

As an example:

Dry run, so not doing much. But I would do this:

Building 18 commits for 1059 boards (4 threads, 1 job per thread)
Build directory: ../lcd9b
    5bb3505 Merge branch 'master' of git://git.denx.de/u-boot-arm
    c18f1b4 tegra: Use const for pinmux_config_pingroup/table()
    2f043ae tegra: Add display support to funcmux
    e349900 tegra: fdt: Add pwm binding and node
    424a5f0 tegra: fdt: Add LCD definitions for Tegra
    0636ccf tegra: Add support for PWM
    a994fe7 tegra: Add SOC support for display/lcd
    fcd7350 tegra: Add LCD driver
    4d46e9d tegra: Add LCD support to Nvidia boards
    991bd48 arm: Add control over cachability of memory regions
    54e8019 lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment
    d92aff7 lcd: Add support for flushing LCD fb from dcache after update
    dbd0677 tegra: Align LCD frame buffer to section boundary
    0cff9b8 tegra: Support control of cache settings for LCD
    9c56900 tegra: fdt: Add LCD definitions for Seaboard
    5cc29db lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console
    cac5a23 tegra: Enable display/lcd support on Seaboard
    49ff541 wip

Total boards to build for each commit: 1059

This shows that it will build all 1059 boards, using 4 threads (because
we have a 4-core CPU). Each thread will run with -j1, meaning that each
make job will use a single CPU. The list of commits to be built helps you
confirm that things look about right. Notice that buildman has chosen a
'base' directory for you, immediately above your source tree.

Buildman works entirely inside the base directory, here ../lcd9b,
creating a working directory for each thread, and creating output
directories for each commit and board.


Suggested Workflow
==================

To run the build for real, take off the -n:

$ ./tools/buildman/buildman -b <branch>

Buildman will set up some working directories, and get started. After a
minute or so it will settle down to a steady pace, with a display like this:

Building 18 commits for 1059 boards (4 threads, 1 job per thread)
  528   36  124 /19062  1:13:30  : SIMPC8313_SP

This means that it is building 19062 board/commit combinations. So far it
has managed to successfully build 528. Another 36 have built with warnings,
and 124 more didn't build at all. Buildman expects to complete the process
in around an hour and a quarter. Use this time to buy a faster computer.


To find out how the build went, ask for a summary with -s. You can do this
either before the build completes (presumably in another terminal) or
afterwards. Let's work through an example of how this is used:

$ ./tools/buildman/buildman -b lcd9b -s
...
01: Merge branch 'master' of git://git.denx.de/u-boot-arm
   powerpc:   + galaxy5200_LOWBOOT
02: tegra: Use const for pinmux_config_pingroup/table()
03: tegra: Add display support to funcmux
04: tegra: fdt: Add pwm binding and node
05: tegra: fdt: Add LCD definitions for Tegra
06: tegra: Add support for PWM
07: tegra: Add SOC support for display/lcd
08: tegra: Add LCD driver
09: tegra: Add LCD support to Nvidia boards
10: arm: Add control over cachability of memory regions
11: lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment
12: lcd: Add support for flushing LCD fb from dcache after update
       arm:   + lubbock
13: tegra: Align LCD frame buffer to section boundary
14: tegra: Support control of cache settings for LCD
15: tegra: fdt: Add LCD definitions for Seaboard
16: lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console
17: tegra: Enable display/lcd support on Seaboard
18: wip

This shows which commits have succeeded and which have failed. In this case
the build is still in progress so many boards are not built yet (use -u to
see which ones). But still we can see a few failures. The galaxy5200_LOWBOOT
never builds correctly. This could be a problem with our toolchain, or it
could be a bug in the upstream. The good news is that we probably don't need
to blame our commits. The bad news is that our commits are not tested on that
board.

Commit 12 broke lubbock. That's what the '+ lubbock' means. The failure
is never fixed by a later commit, or you would see lubbock again, in green,
without the +.

To see the actual error:

$ ./tools/buildman/buildman -b <branch> -se lubbock
...
12: lcd: Add support for flushing LCD fb from dcache after update
       arm:   + lubbock
+common/libcommon.o: In function `lcd_sync':
+/u-boot/lcd9b/.bm-work/00/common/lcd.c:120: undefined reference to `flush_dcache_range'
+arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2010q1-202) 2.19.51.20090709 assertion fail /scratch/julian/2010q1-release-linux-lite/obj/binutils-src-2010q1-202-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12572
+make: *** [/u-boot/lcd9b/.bm-work/00/build/u-boot] Error 139
13: tegra: Align LCD frame buffer to section boundary
14: tegra: Support control of cache settings for LCD
15: tegra: fdt: Add LCD definitions for Seaboard
16: lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console
-/u-boot/lcd9b/.bm-work/00/common/lcd.c:120: undefined reference to `flush_dcache_range'
+/u-boot/lcd9b/.bm-work/00/common/lcd.c:125: undefined reference to `flush_dcache_range'
17: tegra: Enable display/lcd support on Seaboard
18: wip

So the problem is in lcd.c, due to missing cache operations. This information
should be enough to work out what that commit is doing to break these
boards. (In this case pxa did not have cache operations defined).

If you see error lines marked with '-', that means that the errors were fixed
by that commit. Sometimes commits can be in the wrong order, so that a
breakage is introduced for a few commits and fixed by later commits. This
shows up clearly with buildman. You can then reorder the commits and try
again.

At commit 16, the error moves: you can see that the old error at line 120
is fixed, but there is a new one at line 126. This is probably only because
we added some code and moved the broken line further down the file.

If many boards have the same error, then -e will display the error only
once. This makes the output as concise as possible. To see which boards have
each error, use -l. So it is safe to omit the board name - you will not get
lots of repeated output for every board.

Buildman tries to distinguish warnings from errors, and shows warning lines
separately with a 'w' prefix.

The full build output in this case is available in:

../lcd9b/12_of_18_gd92aff7_lcd--Add-support-for/lubbock/

   done: Indicates the build was done, and holds the return code from make.
         This is 0 for a good build, typically 2 for a failure.

   err:  Output from stderr, if any. Errors and warnings appear here.

   log:  Output from stdout. Normally there isn't any since buildman runs
         in silent mode. Use -V to force a verbose build (this passes V=1
         to 'make')

   toolchain: Shows information about the toolchain used for the build.

   sizes: Shows image size information.

It is possible to get the build binary output there also. Use the -k option
for this. In that case you will also see some output files, like:

   System.map  toolchain  u-boot  u-boot.bin  u-boot.map  autoconf.mk
   (also SPL versions u-boot-spl and u-boot-spl.bin if available)


Checking Image Sizes
====================

A key requirement for U-Boot is that you keep code/data size to a minimum.
Where a new feature increases this noticeably it should normally be put
behind a CONFIG flag so that boards can leave it disabled and keep the image
size more or less the same with each new release.

To check the impact of your commits on image size, use -S. For example:

$ ./tools/buildman/buildman -b us-x86 -sS
Summary of 10 commits for 1066 boards (4 threads, 1 job per thread)
01: MAKEALL: add support for per architecture toolchains
02: x86: Add function to get top of usable ram
       x86: (for 1/3 boards)  text -272.0  rodata +41.0
03: x86: Add basic cache operations
04: x86: Permit bootstage and timer data to be used prior to relocation
       x86: (for 1/3 boards)  data +16.0
05: x86: Add an __end symbol to signal the end of the U-Boot binary
       x86: (for 1/3 boards)  text +76.0
06: x86: Rearrange the output input to remove BSS
       x86: (for 1/3 boards)  bss -2140.0
07: x86: Support relocation of FDT on start-up
       x86: +   coreboot-x86
08: x86: Add error checking to x86 relocation code
09: x86: Adjust link device tree include file
10: x86: Enable CONFIG_OF_CONTROL on coreboot


You can see that image size only changed on x86, which is good because this
series is not supposed to change any other board. From commit 7 onwards the
build fails so we don't get code size numbers. The numbers are fractional
because they are an average of all boards for that architecture. The
intention is to allow you to quickly find image size problems introduced by
your commits.

Note that the 'text' region and 'rodata' are split out. You should add the
two together to get the total read-only size (reported as the first column
in the output from binutil's 'size' utility).

A useful option is --step which lets you skip some commits. For example
--step 2 will show the image sizes for only every 2nd commit (so it will
compare the image sizes of the 1st, 3rd, 5th... commits). You can also use
--step 0 which will compare only the first and last commits. This is useful
for an overview of how your entire series affects code size. It will build
only the upstream commit and your final branch commit.

You can also use -d to see a detailed size breakdown for each board. This
list is sorted in order from largest growth to largest reduction.

It is even possible to go a little further with the -B option (--bloat). This
shows where U-Boot has bloated, breaking the size change down to the function
level. Example output is below:

$ ./tools/buildman/buildman -b us-mem4 -sSdB
...
19: Roll crc32 into hash infrastructure
       arm: (for 10/10 boards)  all -143.4  bss +1.2  data -4.8  rodata -48.2 text -91.6
            paz00          :  all +23  bss -4  rodata -29  text +56
               u-boot: add: 1/0, grow: 3/-2 bytes: 168/-104 (64)
                 function                                   old     new   delta
                 hash_command                                80     160     +80
                 crc32_wd_buf                                 -      56     +56
                 ext4fs_read_file                           540     568     +28
                 insert_var_value_sub                       688     692      +4
                 run_list_real                             1996    1992      -4
                 do_mem_crc                                 168      68    -100
            trimslice      :  all -9  bss +16  rodata -29  text +4
               u-boot: add: 1/0, grow: 1/-3 bytes: 136/-124 (12)
                 function                                   old     new   delta
                 hash_command                                80     160     +80
                 crc32_wd_buf                                 -      56     +56
                 ext4fs_iterate_dir                         672     668      -4
                 ext4fs_read_file                           568     548     -20
                 do_mem_crc                                 168      68    -100
            whistler       :  all -9  bss +16  rodata -29  text +4
               u-boot: add: 1/0, grow: 1/-3 bytes: 136/-124 (12)
                 function                                   old     new   delta
                 hash_command                                80     160     +80
                 crc32_wd_buf                                 -      56     +56
                 ext4fs_iterate_dir                         672     668      -4
                 ext4fs_read_file                           568     548     -20
                 do_mem_crc                                 168      68    -100
            seaboard       :  all -9  bss -28  rodata -29  text +48
               u-boot: add: 1/0, grow: 3/-2 bytes: 160/-104 (56)
                 function                                   old     new   delta
                 hash_command                                80     160     +80
                 crc32_wd_buf                                 -      56     +56
                 ext4fs_read_file                           548     568     +20
                 run_list_real                             1996    2000      +4
                 do_nandboot                                760     756      -4
                 do_mem_crc                                 168      68    -100
            colibri_t20    :  all -9  rodata -29  text +20
               u-boot: add: 1/0, grow: 2/-3 bytes: 140/-112 (28)
                 function                                   old     new   delta
                 hash_command                                80     160     +80
                 crc32_wd_buf                                 -      56     +56
                 read_abs_bbt                               204     208      +4
                 do_nandboot                                760     756      -4
                 ext4fs_read_file                           576     568      -8
                 do_mem_crc                                 168      68    -100
            ventana        :  all -37  bss -12  rodata -29  text +4
               u-boot: add: 1/0, grow: 1/-3 bytes: 136/-124 (12)
                 function                                   old     new   delta
                 hash_command                                80     160     +80
                 crc32_wd_buf                                 -      56     +56
                 ext4fs_iterate_dir                         672     668      -4
                 ext4fs_read_file                           568     548     -20
                 do_mem_crc                                 168      68    -100
            harmony        :  all -37  bss -16  rodata -29  text +8
               u-boot: add: 1/0, grow: 2/-3 bytes: 140/-124 (16)
                 function                                   old     new   delta
                 hash_command                                80     160     +80
                 crc32_wd_buf                                 -      56     +56
                 nand_write_oob_syndrome                    428     432      +4
                 ext4fs_iterate_dir                         672     668      -4
                 ext4fs_read_file                           568     548     -20
                 do_mem_crc                                 168      68    -100
            medcom-wide    :  all -417  bss +28  data -16  rodata -93  text -336
               u-boot: add: 1/-1, grow: 1/-2 bytes: 88/-376 (-288)
                 function                                   old     new   delta
                 crc32_wd_buf                                 -      56     +56
                 do_fat_read_at                            2872    2904     +32
                 hash_algo                                   16       -     -16
                 do_mem_crc                                 168      68    -100
                 hash_command                               420     160    -260
            tec            :  all -449  bss -4  data -16  rodata -93  text -336
               u-boot: add: 1/-1, grow: 1/-2 bytes: 88/-376 (-288)
                 function                                   old     new   delta
                 crc32_wd_buf                                 -      56     +56
                 do_fat_read_at                            2872    2904     +32
                 hash_algo                                   16       -     -16
                 do_mem_crc                                 168      68    -100
                 hash_command                               420     160    -260
            plutux         :  all -481  bss +16  data -16  rodata -93  text -388
               u-boot: add: 1/-1, grow: 1/-3 bytes: 68/-408 (-340)
                 function                                   old     new   delta
                 crc32_wd_buf                                 -      56     +56
                 do_load_serial_bin                        1688    1700     +12
                 hash_algo                                   16       -     -16
                 do_fat_read_at                            2904    2872     -32
                 do_mem_crc                                 168      68    -100
                 hash_command                               420     160    -260
   powerpc: (for 5/5 boards)  all +37.4  data -3.2  rodata -41.8  text +82.4
            MPC8610HPCD    :  all +55  rodata -29  text +84
               u-boot: add: 1/0, grow: 0/-1 bytes: 176/-96 (80)
                 function                                   old     new   delta
                 hash_command                                 -     176    +176
                 do_mem_crc                                 184      88     -96
            MPC8641HPCN    :  all +55  rodata -29  text +84
               u-boot: add: 1/0, grow: 0/-1 bytes: 176/-96 (80)
                 function                                   old     new   delta
                 hash_command                                 -     176    +176
                 do_mem_crc                                 184      88     -96
            MPC8641HPCN_36BIT:  all +55  rodata -29  text +84
               u-boot: add: 1/0, grow: 0/-1 bytes: 176/-96 (80)
                 function                                   old     new   delta
                 hash_command                                 -     176    +176
                 do_mem_crc                                 184      88     -96
            sbc8641d       :  all +55  rodata -29  text +84
               u-boot: add: 1/0, grow: 0/-1 bytes: 176/-96 (80)
                 function                                   old     new   delta
                 hash_command                                 -     176    +176
                 do_mem_crc                                 184      88     -96
            xpedite517x    :  all -33  data -16  rodata -93  text +76
               u-boot: add: 1/-1, grow: 0/-1 bytes: 176/-112 (64)
                 function                                   old     new   delta
                 hash_command                                 -     176    +176
                 hash_algo                                   16       -     -16
                 do_mem_crc                                 184      88     -96
...


This shows that commit 19 has reduced codesize for arm slightly and increased
it for powerpc. This increase was offset in by reductions in rodata and
data/bss.

Shown below the summary lines are the sizes for each board. Below each board
are the sizes for each function. This information starts with:

   add - number of functions added / removed
   grow - number of functions which grew / shrunk
   bytes - number of bytes of code added to / removed from all functions,
            plus the total byte change in brackets

The change seems to be that hash_command() has increased by more than the
do_mem_crc() function has decreased. The function sizes typically add up to
roughly the text area size, but note that every read-only section except
rodata is included in 'text', so the function total does not exactly
correspond.

It is common when refactoring code for the rodata to decrease as the text size
increases, and vice versa.


The .buildman file
==================

The .buildman file provides information about the available toolchains and
also allows build flags to be passed to 'make'. It consists of several
sections, with the section name in square brackets. Within each section are
a set of (tag, value) pairs.

'[toolchain]' section

    This lists the available toolchains. The tag here doesn't matter, but
    make sure it is unique. The value is the path to the toolchain. Buildman
    will look in that path for a file ending in 'gcc'. It will then execute
    it to check that it is a C compiler, passing only the --version flag to
    it. If the return code is 0, buildman assumes that it is a valid C
    compiler. It uses the first part of the name as the architecture and
    strips off the last part when setting the CROSS_COMPILE environment
    variable (parts are delimited with a hyphen).

    For example powerpc-linux-gcc will be noted as a toolchain for 'powerpc'
    and CROSS_COMPILE will be set to powerpc-linux- when using it.

'[toolchain-alias]' section

    This converts toolchain architecture names to U-Boot names. For example,
    if an x86 toolchains is called i386-linux-gcc it will not normally be
    used for architecture 'x86'. Adding 'x86: i386 x86_64' to this section
    will tell buildman that the i386 and x86_64 toolchains can be used for
    the x86 architecture.

'[make-flags]' section

    U-Boot's build system supports a few flags (such as BUILD_TAG) which
    affect the build product. These flags can be specified in the buildman
    settings file. They can also be useful when building U-Boot against other
    open source software.

    [make-flags]
    at91-boards=ENABLE_AT91_TEST=1
    snapper9260=${at91-boards} BUILD_TAG=442
    snapper9g45=${at91-boards} BUILD_TAG=443

    This will use 'make ENABLE_AT91_TEST=1 BUILD_TAG=442' for snapper9260
    and 'make ENABLE_AT91_TEST=1 BUILD_TAG=443' for snapper9g45. A special
    variable ${target} is available to access the target name (snapper9260
    and snapper9g20 in this case). Variables are resolved recursively. Note
    that variables can only contain the characters A-Z, a-z, 0-9, hyphen (-)
    and underscore (_).

    It is expected that any variables added are dealt with in U-Boot's
    config.mk file and documented in the README.

    Note that you can pass ad-hoc options to the build using environment
    variables, for example:

       SOME_OPTION=1234 ./tools/buildman/buildman my_board


Quick Sanity Check
==================

If you have made changes and want to do a quick sanity check of the
currently checked-out source, run buildman without the -b flag. This will
build the selected boards and display build status as it runs (i.e. -v is
enabled automatically). Use -e to see errors/warnings as well.


Building Ranges
===============

You can build a range of commits by specifying a range instead of a branch
when using the -b flag. For example:

    upstream/master..us-buildman

will build commits in us-buildman that are not in upstream/master.


Building Faster
===============

By default, buildman executes 'make mrproper' prior to building the first
commit for each board. This causes everything to be built from scratch. If you
trust the build system's incremental build capabilities, you can pass the -I
flag to skip the 'make mproper' invocation, which will reduce the amount of
work 'make' does, and hence speed up the build. This flag will speed up any
buildman invocation, since it reduces the amount of work done on any build.

One possible application of buildman is as part of a continual edit, build,
edit, build, ... cycle; repeatedly applying buildman to the same change or
series of changes while making small incremental modifications to the source
each time. This provides quick feedback regarding the correctness of recent
modifications. In this scenario, buildman's default choice of build directory
causes more build work to be performed than strictly necessary.

By default, each buildman thread uses a single directory for all builds. When a
thread builds multiple boards, the configuration built in this directory will
cycle through various different configurations, one per board built by the
thread. Variations in the configuration will force a rebuild of affected source
files when a thread switches between boards. Ideally, such buildman-induced
rebuilds would not happen, thus allowing the build to operate as efficiently as
the build system and source changes allow. buildman's -P flag may be used to
enable this; -P causes each board to be built in a separate (board-specific)
directory, thus avoiding any buildman-induced configuration changes in any
build directory.

U-Boot's build system embeds information such as a build timestamp into the
final binary. This information varies each time U-Boot is built. This causes
various files to be rebuilt even if no source changes are made, which in turn
requires that the final U-Boot binary be re-linked. This unnecessary work can
be avoided by turning off the timestamp feature. This can be achieved by
setting the SOURCE_DATE_EPOCH environment variable to 0.

Combining all of these options together yields the command-line shown below.
This will provide the quickest possible feedback regarding the current content
of the source tree, thus allowing rapid tested evolution of the code.

    SOURCE_DATE_EPOCH=0 ./tools/buildman/buildman -I -P tegra


Checking configuration
======================

A common requirement when converting CONFIG options to Kconfig is to check
that the effective configuration has not changed due to the conversion.
Buildman supports this with the -K option, used after a build. This shows
differences in effective configuration between one commit and the next.

For example:

    $ buildman -b kc4 -sK
    ...
    43: Convert CONFIG_SPL_USBETH_SUPPORT to Kconfig
    arm:
    + u-boot.cfg: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
    + u-boot-spl.cfg: CONFIG_SPL_MMC_SUPPORT=1 CONFIG_SPL_NAND_SUPPORT=1
    + all: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_MMC_SUPPORT=1 CONFIG_SPL_NAND_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
    am335x_evm_usbspl :
    + u-boot.cfg: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
    + u-boot-spl.cfg: CONFIG_SPL_MMC_SUPPORT=1 CONFIG_SPL_NAND_SUPPORT=1
    + all: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_MMC_SUPPORT=1 CONFIG_SPL_NAND_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
    44: Convert CONFIG_SPL_USB_HOST_SUPPORT to Kconfig
    ...

This shows that commit 44 enabled three new options for the board
am335x_evm_usbspl which were not enabled in commit 43. There is also a
summary for 'arm' showing all the changes detected for that architecture.
In this case there is only one board with changes, so 'arm' output is the
same as 'am335x_evm_usbspl'/

The -K option uses the u-boot.cfg, spl/u-boot-spl.cfg and tpl/u-boot-tpl.cfg
files which are produced by a build. If all you want is to check the
configuration you can in fact avoid doing a full build, using -D. This tells
buildman to configuration U-Boot and create the .cfg files, but not actually
build the source. This is 5-10 times faster than doing a full build.

By default buildman considers the follow two configuration methods
equivalent:

   #define CONFIG_SOME_OPTION

   CONFIG_SOME_OPTION=y

The former would appear in a header filer and the latter in a defconfig
file. The achieve this, buildman considers 'y' to be '1' in configuration
variables. This avoids lots of useless output when converting a CONFIG
option to Kconfig. To disable this behaviour, use --squash-config-y.


Other options
=============

Buildman has various other command line options. Try --help to see them.

When doing builds, Buildman's return code will reflect the overall result:

    0 (success)     No errors or warnings found
    128             Errors found
    129             Warnings found


How to change from MAKEALL
==========================

Buildman includes most of the features of MAKEALL and is generally faster
and easier to use. In particular it builds entire branches: if a particular
commit introduces an error in a particular board, buildman can easily show
you this, even if a later commit fixes that error.

The reasons to deprecate MAKEALL are:
- We don't want to maintain two build systems
- Buildman is typically faster
- Buildman has a lot more features

But still, many people will be sad to lose MAKEALL. If you are used to
MAKEALL, here are a few pointers.

First you need to set up your tool chains - see the 'Setting up' section
for details. Once you have your required toolchain(s) detected then you are
ready to go.

To build the current source tree, run buildman without a -b flag:

   ./tools/buildman/buildman <list of things to build>

This will build the current source tree for the given boards and display
the results and errors.

However buildman usually works on entire branches, and for that you must
specify a board flag:

   ./tools/buildman/buildman -b <branch_name> <list of things to build>

followed by (afterwards, or perhaps concurrently in another terminal):

   ./tools/buildman/buildman -b <branch_name> -s <list of things to build>

to see the results of the build. Rather than showing you all the output,
buildman just shows a summary, with red indicating that a commit introduced
an error and green indicating that a commit fixed an error. Use the -e
flag to see the full errors and -l to see which boards caused which errors.

If you really want to see build results as they happen, use -v when doing a
build (and -e to see the errors/warnings too).

You don't need to stick around on that branch while buildman is running. It
checks out its own copy of the source code, so you can change branches,
add commits, etc. without affecting the build in progress.

The <list of things to build> can include board names, architectures or the
like. There are no flags to disambiguate since ambiguities are rare. Using
the examples from MAKEALL:

Examples:
  - build all Power Architecture boards:
      MAKEALL -a powerpc
      MAKEALL --arch powerpc
      MAKEALL powerpc
          ** buildman -b <branch> powerpc
  - build all PowerPC boards manufactured by vendor "esd":
      MAKEALL -a powerpc -v esd
          ** buildman -b <branch> esd
  - build all PowerPC boards manufactured either by "keymile" or "siemens":
      MAKEALL -a powerpc -v keymile -v siemens
          ** buildman -b <branch> keymile siemens
  - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
      MAKEALL -c mpc83xx -v freescale 4xx
          ** buildman -b <branch> mpc83xx freescale 4xx

Buildman automatically tries to use all the CPUs in your machine. If you
are building a lot of boards it will use one thread for every CPU core
it detects in your machine. This is like MAKEALL's BUILD_NBUILDS option.
You can use the -T flag to change the number of threads. If you are only
building a few boards, buildman will automatically run make with the -j
flag to increase the number of concurrent make tasks. It isn't normally
that helpful to fiddle with this option, but if you use the BUILD_NCPUS
option in MAKEALL then -j is the equivalent in buildman.

Buildman puts its output in ../<branch_name> by default but you can change
this with the -o option. Buildman normally does out-of-tree builds: use -i
to disable that if you really want to. But be careful that once you have
used -i you pollute buildman's copies of the source tree, and you will need
to remove the build directory (normally ../<branch_name>) to run buildman
in normal mode (without -i).

Buildman doesn't keep the output result normally, but use the -k option to
do this.

Please read 'Theory of Operation' a few times as it will make a lot of
things clearer.

Some options you might like are:

   -B shows which functions are growing/shrinking in which commit - great
        for finding code bloat.
   -S shows image sizes for each commit (just an overall summary)
   -u shows boards that you haven't built yet
   --step 0 will build just the upstream commit and the last commit of your
        branch. This is often a quick sanity check that your branch doesn't
        break anything. But note this does not check bisectability!


TODO
====

This has mostly be written in my spare time as a response to my difficulties
in testing large series of patches. Apart from tidying up there is quite a
bit of scope for improvement. Things like better error diffs and easier
access to log files. Also it would be nice if buildman could 'hunt' for
problems, perhaps by building a few boards for each arch, or checking
commits for changed files and building only boards which use those files.

A specific problem to fix is that Ctrl-C does not exit buildman cleanly when
multiple builder threads are active.

Credits
=======

Thanks to Grant Grundler <grundler@chromium.org> for his ideas for improving
the build speed by building all commits for a board instead of the other
way around.


Simon Glass
sjg@chromium.org
Halloween 2012
Updated 12-12-12
Updated 23-02-13