)]}'
{
  "commit": "612ea01018a459234d54ed57ec6a5a244ce75678",
  "tree": "a6c67ffdf32c0621a3270373cf725058409fa0ba",
  "parents": [
    "8ab451c46b846f2bbd7122b29ffdd9a4a04da228"
  ],
  "author": {
    "name": "Kumar Gala",
    "email": "galak@kernel.crashing.org",
    "time": "Tue Oct 21 10:13:14 2008 -0500"
  },
  "committer": {
    "name": "Andrew Fleming-AFLEMING",
    "email": "afleming@freescale.com",
    "time": "Fri Oct 24 17:35:02 2008 -0500"
  },
  "message": "pci/fsl_pci_init: Enable larger address and setting inbound windows properly\n\n* PCI Inbound window was setup incorrectly.  The PCI address and system\n  address were swapped.  The PCI address should be setting piwar/piwbear\n  and the system address should be setting pitar.\n\n* Removed masking of addresses to allow for system address to support\n  system address \u0026 PCI address \u003e32-bits\n\n* Set PIWBEAR \u0026 POTEAR to allow for full 64-bit PCI addresses\n\n* Respect the PCI_REGION_PREFETCH for inbound windows\n\nSigned-off-by: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\nSigned-off-by: Andrew Fleming-AFLEMING \u003cafleming@freescale.com\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "38a16e536196c74e3c81162ec878e5193b4cba65",
      "old_mode": 33188,
      "old_path": "drivers/pci/fsl_pci_init.c",
      "new_id": "f41c8aaaf4e0e849be7bc873dd8174c28fb1ab83",
      "new_mode": 33188,
      "new_path": "drivers/pci/fsl_pci_init.c"
    }
  ]
}