diff --git a/README b/README
index 32d9acd..fcc4d7c 100644
--- a/README
+++ b/README
@@ -593,7 +593,6 @@
 		except those marked below with a "*".
 
 		CONFIG_CMD_ASKENV	* ask for env variable
-		CONFIG_CMD_AUTOSCRIPT	  Autoscript Support
 		CONFIG_CMD_BDI		  bdinfo
 		CONFIG_CMD_BEDBUG	* Include BedBug Debugger
 		CONFIG_CMD_BMP		* BMP support
@@ -654,6 +653,7 @@
 					  (requires CONFIG_CMD_I2C)
 		CONFIG_CMD_SETGETDCR	  Support for DCR Register access
 					  (4xx only)
+		CONFIG_CMD_SOURCE	  "source" command Support
 		CONFIG_CMD_SPI		* SPI serial bus support
 		CONFIG_CMD_USB		* USB support
 		CONFIG_CMD_VFD		* VFD support (TRAB)
@@ -1789,7 +1789,7 @@
 
 		Note: overly (ab)use of the default environment is
 		discouraged. Make sure to check other ways to preset
-		the environment like the autoscript function or the
+		the environment like the "source" command or the
 		boot command first.
 
 - DataFlash Support:
@@ -1948,8 +1948,8 @@
    81	common/cmd_net.c	NetLoop() back without error
   -82	common/cmd_net.c	size == 0 (File with size 0 loaded)
    82	common/cmd_net.c	trying automatic boot
-   83	common/cmd_net.c	running autoscript
-  -83	common/cmd_net.c	some error in automatic boot or autoscript
+   83	common/cmd_net.c	running "source" command
+  -83	common/cmd_net.c	some error in automatic boot or "source" command
    84	common/cmd_net.c	end without errors
 
 FIT uImage format:
@@ -2952,7 +2952,7 @@
   autoscript	- if set to "yes" commands like "loadb", "loady",
 		  "bootp", "tftpb", "rarpboot" and "nfs" will attempt
 		  to automatically run script images (by internally
-		  calling "autoscript").
+		  calling "source").
 
   autoscript_uname - if script image is in a format (FIT) this
 		     variable is used to get script subimage unit name.
diff --git a/board/cray/L1/L1.c b/board/cray/L1/L1.c
index 1c82bdf..8a06ecc 100644
--- a/board/cray/L1/L1.c
+++ b/board/cray/L1/L1.c
@@ -164,7 +164,7 @@
 			setenv ("ethaddr", e);
 		}
 	}
-	sprintf (bootcmd,"autoscript %X",(unsigned)bootscript);
+	sprintf (bootcmd,"source %X",(unsigned)bootscript);
 	setenv ("bootcmd", bootcmd);
 	return (0);
 }
diff --git a/board/cray/L1/bootscript.hush b/board/cray/L1/bootscript.hush
index ec4839b..f2f78ad 100644
--- a/board/cray/L1/bootscript.hush
+++ b/board/cray/L1/bootscript.hush
@@ -31,7 +31,7 @@
 	tftp $tftp_addr $bootcript
 	if imi $tftp_addr
 	then
-		autoscript $tftp_addr
+		source $tftp_addr
 	fi
 fi
 
diff --git a/board/esd/common/cmd_loadpci.c b/board/esd/common/cmd_loadpci.c
index 0a6626e..c779f79 100644
--- a/board/esd/common/cmd_loadpci.c
+++ b/board/esd/common/cmd_loadpci.c
@@ -30,7 +30,7 @@
 #if defined(CONFIG_CMD_BSP)
 
 extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
-extern int do_autoscript (cmd_tbl_t *, int, int, char *[]);
+extern int do_source (cmd_tbl_t *, int, int, char *[]);
 
 #define ADDRMASK 0xfffff000
 
@@ -98,12 +98,12 @@
 
 		case 1:
 			/*
-			 * Boot image via autoscr
+			 * Boot image via "source" command
 			 */
 			printf("executing script at addr 0x%s ...\n", addr);
 			local_args[0] = addr;
 			local_args[1] = NULL;
-			do_autoscript(cmdtp, 0, 1, local_args);
+			do_source(cmdtp, 0, 1, local_args);
 			break;
 
 		case 2:
diff --git a/board/pn62/cmd_pn62.c b/board/pn62/cmd_pn62.c
index 10d0df6..b9f3bdb 100644
--- a/board/pn62/cmd_pn62.c
+++ b/board/pn62/cmd_pn62.c
@@ -152,12 +152,13 @@
 	rcode = do_bootm (cmdtp, 0, 1, local_args);
     }
 
-#ifdef CONFIG_AUTOSCRIPT
+#ifdef CONFIG_SOURCE
     if (load_addr) {
 	char *s;
 
 	if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) {
-		printf ("Running autoscript at addr 0x%08lX", load_addr);
+		printf ("Running "source" command at addr 0x%08lX",
+			load_addr);
 
 		s = getenv ("autoscript_uname");
 		if (s)
@@ -165,7 +166,7 @@
 		else
 			puts (" ...\n");
 
-		rcode = autoscript (load_addr, s);
+		rcode = source (load_addr, s);
 	}
     }
 #endif
diff --git a/common/Makefile b/common/Makefile
index 23171ca..eb8e283 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -61,8 +61,8 @@
 
 # command
 COBJS-$(CONFIG_CMD_AMBAPP) += cmd_ambapp.o
-COBJS-$(CONFIG_AUTOSCRIPT) += cmd_autoscript.o
-COBJS-$(CONFIG_CMD_AUTOSCRIPT) += cmd_autoscript.o
+COBJS-$(CONFIG_SOURCE) += cmd_source.o
+COBJS-$(CONFIG_CMD_SOURCE) += cmd_source.o
 COBJS-$(CONFIG_CMD_BDI) += cmd_bdinfo.o
 COBJS-$(CONFIG_CMD_BEDBUG) += bedbug.o cmd_bedbug.o
 COBJS-$(CONFIG_CMD_BMP) += cmd_bmp.o
diff --git a/common/cmd_load.c b/common/cmd_load.c
index 88fba88..d5eaac7 100644
--- a/common/cmd_load.c
+++ b/common/cmd_load.c
@@ -513,12 +513,13 @@
 		}
 	}
 
-#ifdef CONFIG_AUTOSCRIPT
+#ifdef CONFIG_SOURCE
 	if (load_addr) {
 		char *s;
 
 		if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) {
-			printf ("Running autoscript at addr 0x%08lX", load_addr);
+			printf ("Running "source" command at addr 0x%08lX",
+				load_addr);
 
 			s = getenv ("autoscript_uname");
 			if (s)
@@ -526,7 +527,7 @@
 			else
 				puts (" ...\n");
 
-			rcode = autoscript (load_addr, s);
+			rcode = source (load_addr, s);
 		}
 	}
 #endif
diff --git a/common/cmd_net.c b/common/cmd_net.c
index a687849..9bef7a2 100644
--- a/common/cmd_net.c
+++ b/common/cmd_net.c
@@ -222,9 +222,10 @@
 		rcode = do_bootm (cmdtp, 0, 1, local_args);
 	}
 
-#ifdef CONFIG_AUTOSCRIPT
+#ifdef CONFIG_SOURCE
 	if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) {
-		printf ("Running autoscript at addr 0x%08lX", load_addr);
+		printf ("Running "source" command at addr 0x%08lX",
+			load_addr);
 
 		s = getenv ("autoscript_uname");
 		if (s)
@@ -233,7 +234,7 @@
 			puts (" ...\n");
 
 		show_boot_progress (83);
-		rcode = autoscript (load_addr, s);
+		rcode = source (load_addr, s);
 	}
 #endif
 	if (rcode < 0)
diff --git a/common/cmd_autoscript.c b/common/cmd_source.c
similarity index 77%
rename from common/cmd_autoscript.c
rename to common/cmd_source.c
index e5a9bc0..43e1315 100644
--- a/common/cmd_autoscript.c
+++ b/common/cmd_source.c
@@ -22,15 +22,11 @@
  */
 
 /*
- * autoscript allows a remote host to download a command file and,
- * optionally, binary data for automatically updating the target. For
- * example, you create a new kernel image and want the user to be
- * able to simply download the image and the machine does the rest.
- * The kernel image is postprocessed with mkimage, which creates an
- * image with a script file prepended. If enabled, autoscript will
- * verify the script and contents of the download and execute the
- * script portion. This would be responsible for erasing flash,
- * copying the new image, and rebooting the machine.
+ * The "source" command allows to define "script images", i. e. files
+ * that contain command sequences that can be executed by the command
+ * interpreter. It returns the exit status of the last command
+ * executed from the script. This is very similar to running a shell
+ * script in a UNIX shell, hence the name for the command.
  */
 
 /* #define DEBUG */
@@ -48,7 +44,7 @@
 #endif
 
 int
-autoscript (ulong addr, const char *fit_uname)
+source (ulong addr, const char *fit_uname)
 {
 	ulong		len;
 	image_header_t	*hdr;
@@ -150,7 +146,7 @@
 		break;
 #endif
 	default:
-		puts ("Wrong image format for autoscript\n");
+		puts ("Wrong image format for \"source\" command\n");
 		return 1;
 	}
 
@@ -201,9 +197,9 @@
 }
 
 /**************************************************/
-#if defined(CONFIG_CMD_AUTOSCRIPT)
+#if defined(CONFIG_CMD_SOURCE)
 int
-do_autoscript (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+do_source (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	ulong addr;
 	int rcode;
@@ -212,30 +208,49 @@
 	/* Find script image */
 	if (argc < 2) {
 		addr = CONFIG_SYS_LOAD_ADDR;
-		debug ("*  autoscr: default load address = 0x%08lx\n", addr);
+		debug ("*  source: default load address = 0x%08lx\n", addr);
 #if defined(CONFIG_FIT)
 	} else if (fit_parse_subimage (argv[1], load_addr, &addr, &fit_uname)) {
-		debug ("*  autoscr: subimage '%s' from FIT image at 0x%08lx\n",
+		debug ("*  source: subimage '%s' from FIT image at 0x%08lx\n",
 				fit_uname, addr);
 #endif
 	} else {
 		addr = simple_strtoul(argv[1], NULL, 16);
-		debug ("*  autoscr: cmdline image address = 0x%08lx\n", addr);
+		debug ("*  source: cmdline image address = 0x%08lx\n", addr);
 	}
 
 	printf ("## Executing script at %08lx\n", addr);
-	rcode = autoscript (addr, fit_uname);
+	rcode = source (addr, fit_uname);
 	return rcode;
 }
 
 U_BOOT_CMD(
-	autoscr, 2, 0,	do_autoscript,
+	source, 2, 0,	do_source,
 	"run script from memory",
-	"[addr] - run script starting at addr"
-	" - A valid autoscr header must be present\n"
+	"[addr]\n"
+	"\t- run script starting at addr\n"
+	"\t- A valid image header must be present\n"
 #if defined(CONFIG_FIT)
 	"For FIT format uImage addr must include subimage\n"
 	"unit name in the form of addr:<subimg_uname>\n"
 #endif
 );
+
+/*
+ * Keep for now for backward compatibility;
+ * remove later when support for "autoscr" goes away.
+ */
+static int
+do_autoscr (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	printf ("\n### WARNING ### "
+		"\"autoscr\" is deprecated, use \"source\" instead ###\n\n");
+	return do_source (cmdtp, flag, argc, argv);
+}
+
+U_BOOT_CMD(
+	autoscr, 2, 0,	do_autoscr,
+	"DEPRECATED - use \"source\" command instead",
+	"DEPRECATED - use \"source\" command instead\n"
+);
 #endif
diff --git a/doc/feature-removal-schedule.txt b/doc/feature-removal-schedule.txt
index 10e63bf..f973403 100644
--- a/doc/feature-removal-schedule.txt
+++ b/doc/feature-removal-schedule.txt
@@ -8,12 +8,20 @@
 ---------------------------
 
 What:	"autoscr" command
-When:	August 2009
-Why:	"autosrc" is an ugly and completely non-standard name.  The "autoscr"
-	command is deprecated and will be replaced the "source" command as
-	used by other shells such as bash.  Both commands will be supported
-	for a transition period of 6 months after which "autoscr" will be
-	removed.
+When:	Release 2009-09
+
+Why:	"autosrc" is an ugly and completely non-standard name.
+        The "autoscr" command is deprecated and will be replaced by
+
+        the "source" command as used by other shells such as bash.
+
+        Starting with March 2009, both commands will be supported for
+        a transition period of 6 months after which "autoscr" will be
+        removed. During the transition period existing scripts and
+        environment variable names remain untouched for maximum
+        compatibiltiy; thse will be changed when support for the
+        "autoscr" command get's finally dropped.
+
 Who:	Peter Tyser <ptyser@xes-inc.com>
 
 ---------------------------
diff --git a/include/common.h b/include/common.h
index 952ddff..20c058a 100644
--- a/include/common.h
+++ b/include/common.h
@@ -234,8 +234,8 @@
 /* common/flash.c */
 void flash_perror (int);
 
-/* common/cmd_autoscript.c */
-int	autoscript (ulong addr, const char *fit_uname);
+/* common/cmd_source.c */
+int	source (ulong addr, const char *fit_uname);
 
 extern ulong load_addr;		/* Default Load Address */
 
diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
index db1f55c..c5e0d26 100644
--- a/include/config_cmd_all.h
+++ b/include/config_cmd_all.h
@@ -15,7 +15,6 @@
 
 #define CONFIG_CMD_AMBAPP	/* AMBA Plug & Play Bus print utility */
 #define CONFIG_CMD_ASKENV	/* ask for env variable		*/
-#define CONFIG_CMD_AUTOSCRIPT	/* Autoscript Support		*/
 #define CONFIG_CMD_BDI		/* bdinfo			*/
 #define CONFIG_CMD_BEDBUG	/* Include BedBug Debugger	*/
 #define CONFIG_CMD_BMP		/* BMP support			*/
@@ -76,6 +75,7 @@
 #define CONFIG_CMD_SETEXPR	/* setexpr support		*/
 #define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx		*/
 #define CONFIG_CMD_SNTP		/* SNTP support			*/
+#define CONFIG_CMD_SOURCE	/* "source" command support	*/
 #define CONFIG_CMD_SPI		/* SPI utility			*/
 #define CONFIG_CMD_TERMINAL	/* built-in Serial Terminal	*/
 #define CONFIG_CMD_UNIVERSE	/* Tundra Universe Support	*/
diff --git a/include/config_cmd_default.h b/include/config_cmd_default.h
index 3667602..0376e44 100644
--- a/include/config_cmd_default.h
+++ b/include/config_cmd_default.h
@@ -16,7 +16,6 @@
  * hardware, not fully tested, etc.).
  */
 
-#define CONFIG_CMD_AUTOSCRIPT	/* Autoscript Support		*/
 #define CONFIG_CMD_BDI		/* bdinfo			*/
 #define CONFIG_CMD_BOOTD	/* bootd			*/
 #define CONFIG_CMD_CONSOLE	/* coninfo			*/
@@ -37,6 +36,7 @@
 #define CONFIG_CMD_NFS		/* NFS support			*/
 #define CONFIG_CMD_RUN		/* run command in env variable	*/
 #define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx		*/
+#define CONFIG_CMD_SOURCE	/* "source" command support	*/
 #define CONFIG_CMD_XIMG		/* Load part of Multi Image	*/
 
 #endif	/* _CONFIG_CMD_DEFAULT_H */
diff --git a/include/configs/APC405.h b/include/configs/APC405.h
index 7453518..41eaaab 100644
--- a/include/configs/APC405.h
+++ b/include/configs/APC405.h
@@ -124,19 +124,19 @@
  */
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SOURCE
 #define CONFIG_CMD_USB
-#define CONFIG_CMD_AUTOSCRIPT
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h
index 527c846..150bd29 100644
--- a/include/configs/CRAYL1.h
+++ b/include/configs/CRAYL1.h
@@ -74,32 +74,32 @@
 #define	CONFIG_SYS_HZ		             1000	/* decrementer freq: 1 ms ticks	*/
 #define CONFIG_SYS_HUSH_PARSER			1
 #define CONFIG_SYS_PROMPT_HUSH_PS2		"> "
-#define CONFIG_AUTOSCRIPT		1
+#define CONFIG_SOURCE			1
 
 
 /*
  * Command line configuration.
  */
 
+#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BDI
-#define CONFIG_CMD_IMI
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_IMMAP
 #define CONFIG_CMD_MEMORY
 #define CONFIG_CMD_NET
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_IMMAP
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DATE
 #define CONFIG_CMD_RUN
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_SETGETDCR
+#define CONFIG_CMD_SOURCE
 
 
 /*
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index 85c0e61..e6abbdc 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -290,14 +290,13 @@
 
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_AUTOSCRIPT
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_BMP
-#define CONFIG_CMD_DATE
 #define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BMP
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DTT
 #define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DTT
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_FAT
@@ -309,9 +308,10 @@
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_USB
 
 #define CONFIG_SUPPORT_VFAT
 
@@ -428,7 +428,7 @@
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
-#define CONFIG_AUTOSCRIPT	1
+#define CONFIG_SOURCE		1
 
 #define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP
diff --git a/include/configs/EP1C20.h b/include/configs/EP1C20.h
index a0904d4..8941e4d 100644
--- a/include/configs/EP1C20.h
+++ b/include/configs/EP1C20.h
@@ -180,7 +180,6 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVES
 
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_BOOTD
 #undef CONFIG_CMD_CONSOLE
 #undef CONFIG_CMD_FPGA
@@ -188,6 +187,7 @@
 #undef CONFIG_CMD_ITEST
 #undef CONFIG_CMD_NFS
 #undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_SOURCE
 #undef CONFIG_CMD_XIMG
 
 
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index a399d22..8f18ab2 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -152,7 +152,7 @@
 
 /*
  * Set default IP stuff just to get bootstrap entries into the
- * environment so that we can autoscript the full default environment.
+ * environment so that we can source the full default environment.
  */
 #define CONFIG_ETHADDR					9a:52:63:15:85:25
 #define CONFIG_SERVERIP					10.0.4.201
diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h
index cd910ea..edbc701 100644
--- a/include/configs/MVBC_P.h
+++ b/include/configs/MVBC_P.h
@@ -73,8 +73,8 @@
 #define MV_INITRD_LENGTH	0x00300000
 #define MV_SCRATCH_ADDR		0x00000000
 #define MV_SCRATCH_LENGTH	MV_INITRD_LENGTH
-#define MV_AUTOSCR_ADDR		0xff840000
-#define MV_AUTOSCR_ADDR2	0xff850000
+#define MV_SOURCE_ADDR		0xff840000
+#define MV_SOURCE_ADDR2		0xff850000
 #define MV_DTB_ADDR		0xfffc0000
 
 #define CONFIG_SHOW_BOOT_PROGRESS 1
@@ -130,8 +130,8 @@
 #define CONFIG_RESET_TO_RETRY		1000
 
 #define CONFIG_BOOTCOMMAND	"if imi ${autoscr_addr}; \
-					then autoscr ${autoscr_addr};	\
-					else autoscr ${autoscr_addr2};	\
+					then source ${autoscr_addr};	\
+					else source ${autoscr_addr2};	\
 				fi;"
 
 #define CONFIG_BOOTARGS		"root=/dev/ram ro rootfstype=squashfs"
@@ -149,8 +149,8 @@
 	"fpga=0\0"						\
 	"fpgadata=" MK_STR(MV_FPGA_DATA) "\0"			\
 	"fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0"		\
-	"autoscr_addr=" MK_STR(MV_AUTOSCR_ADDR) "\0"		\
-	"autoscr_addr2=" MK_STR(MV_AUTOSCR_ADDR2) "\0"		\
+	"autoscr_addr=" MK_STR(MV_SOURCE_ADDR) "\0"		\
+	"autoscr_addr2=" MK_STR(MV_SOURCE_ADDR2) "\0"		\
 	"mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0"		\
 	"mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0"	\
 	"mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0"		\
diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h
index b321825..8f741f5 100644
--- a/include/configs/MVBLM7.h
+++ b/include/configs/MVBLM7.h
@@ -412,8 +412,8 @@
 #define MV_FPGA_SIZE		0x00076ca2
 #define MV_KERNEL_ADDR		0xff810000
 #define MV_INITRD_ADDR		0xffb00000
-#define MV_AUTOSCR_ADDR		0xff804000
-#define MV_AUTOSCR_ADDR2	0xff806000
+#define MV_SOURCE_ADDR		0xff804000
+#define MV_SOURCE_ADDR2		0xff806000
 #define MV_DTB_ADDR		0xff808000
 #define MV_INITRD_LENGTH	0x00400000
 
@@ -424,8 +424,8 @@
 #define MV_INITRD_ADDR_RAM	0x01000000
 
 #define CONFIG_BOOTCOMMAND	"if imi ${autoscr_addr}; \
-					then autoscr ${autoscr_addr};  \
-					else autoscr ${autoscr_addr2}; \
+					then source ${autoscr_addr};  \
+					else source ${autoscr_addr2}; \
 				fi;"
 #define CONFIG_BOOTARGS		"root=/dev/ram ro rootfstype=squashfs"
 
@@ -438,8 +438,8 @@
 	"fpga=0\0"						\
 	"fpgadata=" MK_STR(MV_FPGA_DATA) "\0"			\
 	"fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0"		\
-	"autoscr_addr=" MK_STR(MV_AUTOSCR_ADDR) "\0"		\
-	"autoscr_addr2=" MK_STR(MV_AUTOSCR_ADDR2) "\0"		\
+	"autoscr_addr=" MK_STR(MV_SOURCE_ADDR) "\0"		\
+	"autoscr_addr2=" MK_STR(MV_SOURCE_ADDR2) "\0"		\
 	"mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0"		\
 	"mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0"	\
 	"mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0"		\
diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h
index 2d04d89..796938a 100644
--- a/include/configs/NETPHONE.h
+++ b/include/configs/NETPHONE.h
@@ -71,7 +71,7 @@
 	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;"	\
 	"bootm"
 
-#define CONFIG_AUTOSCRIPT
+#define CONFIG_SOURCE
 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
 #undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h
index 4a27027..a14b2dd 100644
--- a/include/configs/NETTA2.h
+++ b/include/configs/NETTA2.h
@@ -71,7 +71,7 @@
 	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "	\
 	"bootm"
 
-#define CONFIG_AUTOSCRIPT
+#define CONFIG_SOURCE
 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
 #undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
diff --git a/include/configs/NX823.h b/include/configs/NX823.h
index 9182223..5054d5e 100644
--- a/include/configs/NX823.h
+++ b/include/configs/NX823.h
@@ -55,7 +55,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 #undef	CONFIG_WATCHDOG			/* watchdog disabled, for now	    */
-#define CONFIG_AUTOSCRIPT
+#define CONFIG_SOURCE
 
 /*
  * BOOTP options
@@ -72,7 +72,7 @@
  */
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_SOURCE
 
 
 /* call various generic functions */
diff --git a/include/configs/PN62.h b/include/configs/PN62.h
index 06c11e6..562c5c3 100644
--- a/include/configs/PN62.h
+++ b/include/configs/PN62.h
@@ -59,11 +59,11 @@
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_BSP
 
-#undef CONFIG_CMD_AUTOSCRIPT
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SAVEENV
 #undef CONFIG_CMD_FLASH
 #undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SAVEENV
+#undef CONFIG_CMD_SOURCE
 
 
 #define CONFIG_BAUDRATE		19200	/* console baudrate		*/
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
index 8c2befb..b9e450d 100644
--- a/include/configs/TOP860.h
+++ b/include/configs/TOP860.h
@@ -125,7 +125,7 @@
 #define CONFIG_CMD_BEDBUG
 
 
-#define	CONFIG_AUTOSCRIPT		1
+#define	CONFIG_SOURCE			1
 #define	CONFIG_SYS_LOADS_BAUD_CHANGE	1
 #undef	CONFIG_LOADS_ECHO			/* NO echo on for serial download	*/
 
@@ -419,15 +419,12 @@
 
 /*
  * Set default IP stuff just to get bootstrap entries into the
- * environment so that we can autoscript the full default environment.
+ * environment so that we can source the full default environment.
  */
 #define CONFIG_ETHADDR					9a:52:63:15:85:25
 #define CONFIG_SERVERIP					10.0.4.200
 #define CONFIG_IPADDR					10.0.4.111
 
-/*-----------------------------------------------------------------------
- * Defaults for Autoscript
- */
 #define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address */
 #define	CONFIG_SYS_TFTP_LOADADDR	0x00100000
 
@@ -438,5 +435,4 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index d374981..fe1d102 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -253,7 +253,7 @@
 #define CUSTOM_ENV_SETTINGS						\
 	"bootfile=cam5200/uImage\0"					\
 	"u-boot=cam5200/u-boot.bin\0"					\
-	"setup=tftp 200000 cam5200/setup.img; autoscr 200000\0"
+	"setup=tftp 200000 cam5200/setup.img; source 200000\0"
 #endif
 
 #if defined(CONFIG_TQM5200_B)
diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h
index 5f9a17f..b2d75e3 100644
--- a/include/configs/VoVPN-GW.h
+++ b/include/configs/VoVPN-GW.h
@@ -150,11 +150,9 @@
  * Command line configuration.
  */
 
-#define CONFIG_CMD_AUTOSCRIPT
 #define CONFIG_CMD_BDI
 #define CONFIG_CMD_CONSOLE
 #define CONFIG_CMD_ECHO
-#define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_FLASH
 #define CONFIG_CMD_IMI
 #define CONFIG_CMD_IMLS
@@ -164,6 +162,8 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_SOURCE
 
 
 /*
diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
index 33a67ca..fa27119 100644
--- a/include/configs/afeb9260.h
+++ b/include/configs/afeb9260.h
@@ -69,11 +69,11 @@
  */
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
 
 #define CONFIG_CMD_PING		1
 #define CONFIG_CMD_DHCP		1
diff --git a/include/configs/apollon.h b/include/configs/apollon.h
index 04da083..c14f871 100644
--- a/include/configs/apollon.h
+++ b/include/configs/apollon.h
@@ -127,7 +127,7 @@
 #define CONFIG_MTD_PARTITIONS
 #endif
 
-#undef	CONFIG_CMD_AUTOSCRIPT
+#undef	CONFIG_CMD_SOURCE
 
 #ifndef	CONFIG_SYS_USE_NOR
 # undef	CONFIG_CMD_FLASH
diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h
index 7e7f124..2ddbd17 100644
--- a/include/configs/at91cap9adk.h
+++ b/include/configs/at91cap9adk.h
@@ -91,10 +91,10 @@
  */
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
 
 #define CONFIG_CMD_PING		1
 #define CONFIG_CMD_DHCP		1
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index 1fae3a3..1a5f9a4 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -86,11 +86,11 @@
  */
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
 
 #define CONFIG_CMD_PING		1
 #define CONFIG_CMD_DHCP		1
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 752d7e9..4d50932 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -90,11 +90,11 @@
  */
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
 
 #define CONFIG_CMD_PING		1
 #define CONFIG_CMD_DHCP		1
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index dd500ca..78e0081 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -91,11 +91,11 @@
  */
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
 
 #define CONFIG_CMD_PING		1
 #define CONFIG_CMD_DHCP		1
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 7a4039c..a48f2cb 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -82,12 +82,12 @@
  */
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_NET
+#undef CONFIG_CMD_SOURCE
 #undef CONFIG_CMD_USB
 
 #define CONFIG_CMD_NAND		1
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index c998952..4ed5514 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -117,9 +117,9 @@
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_SPI
 
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_SOURCE
 #undef CONFIG_CMD_XIMG
 
 #define CONFIG_ATMEL_USART		1
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index 2284277..b258f2d 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -142,9 +142,9 @@
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MMC
 
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_SOURCE
 #undef CONFIG_CMD_XIMG
 
 #define CONFIG_ATMEL_USART		1
diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h
index 8cfa312..f93118e 100644
--- a/include/configs/atstk1006.h
+++ b/include/configs/atstk1006.h
@@ -142,9 +142,9 @@
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MMC
 
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_SOURCE
 #undef CONFIG_CMD_XIMG
 
 #define CONFIG_ATMEL_USART		1
diff --git a/include/configs/eNET.h b/include/configs/eNET.h
index f7e6608..dde4c83 100644
--- a/include/configs/eNET.h
+++ b/include/configs/eNET.h
@@ -70,16 +70,15 @@
  */
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_AUTOSCRIPT	/* Autoscript Support		*/
 #define CONFIG_CMD_BDI		/* bdinfo			*/
 #define CONFIG_CMD_BOOTD	/* bootd			*/
 #define CONFIG_CMD_CONSOLE	/* coninfo			*/
 #define CONFIG_CMD_ECHO		/* echo arguments		*/
-#define CONFIG_CMD_SAVEENV	/* saveenv			*/
 #define CONFIG_CMD_FLASH	/* flinfo, erase, protect	*/
 #define CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
 #define CONFIG_CMD_IMI		/* iminfo			*/
 #define CONFIG_CMD_IMLS		/* List all found images	*/
+#define CONFIG_CMD_IRQ		/* IRQ Information		*/
 #define CONFIG_CMD_ITEST	/* Integer (and string) test	*/
 #define CONFIG_CMD_LOADB	/* loadb			*/
 #define CONFIG_CMD_LOADS	/* loads			*/
@@ -88,9 +87,10 @@
 #undef CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
 #undef CONFIG_CMD_NFS		/* NFS support			*/
 #define CONFIG_CMD_RUN		/* run command in env variable	*/
+#define CONFIG_CMD_SAVEENV	/* saveenv			*/
 #define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx		*/
+#define CONFIG_CMD_SOURCE	/* "source" command Support	*/
 #define CONFIG_CMD_XIMG		/* Load part of Multi Image	*/
-#define CONFIG_CMD_IRQ		/* IRQ Information		*/
 
 #define CONFIG_BOOTDELAY		15
 #define CONFIG_BOOTARGS			"root=/dev/mtdblock0 console=ttyS0,9600"
diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h
index 21802df..739ff0d 100644
--- a/include/configs/favr-32-ezkit.h
+++ b/include/configs/favr-32-ezkit.h
@@ -139,9 +139,9 @@
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MMC
 
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_SOURCE
 #undef CONFIG_CMD_XIMG
 
 #define CONFIG_ATMEL_USART		1
diff --git a/include/configs/grsim.h b/include/configs/grsim.h
index a9eaa4a..c3f1a31 100644
--- a/include/configs/grsim.h
+++ b/include/configs/grsim.h
@@ -65,23 +65,23 @@
 /*
  * Supported commands
  */
-#define CONFIG_CMD_AMBAPP	/* AMBA Plyg&Play information   */
-#define CONFIG_CMD_AUTOSCRIPT	/* Autoscript Support           */
-#define CONFIG_CMD_BDI		/* bdinfo                       */
-#define CONFIG_CMD_CONSOLE	/* coninfo                      */
+#define CONFIG_CMD_AMBAPP	/* AMBA Plyg&Play information	*/
+#define CONFIG_CMD_BDI		/* bdinfo			*/
+#define CONFIG_CMD_CONSOLE	/* coninfo			*/
 #define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ECHO		/* echo arguments               */
-#define CONFIG_CMD_FPGA		/* FPGA configuration Support   */
+#define CONFIG_CMD_ECHO		/* echo arguments		*/
+#define CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ITEST	/* Integer (and string) test    */
-#define CONFIG_CMD_LOADB	/* loadb                        */
-#define CONFIG_CMD_LOADS	/* loads                        */
+#define CONFIG_CMD_ITEST	/* Integer (and string) test	*/
+#define CONFIG_CMD_LOADB	/* loadb			*/
+#define CONFIG_CMD_LOADS	/* loads			*/
 #define CONFIG_CMD_MISC		/* Misc functions like sleep etc */
-#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot    */
+#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_RUN		/* run command in env variable  */
-#define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx           */
-#define CONFIG_CMD_XIMG		/* Load part of Multi Image     */
+#define CONFIG_CMD_RUN		/* run command in env variable	*/
+#define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx		*/
+#define CONFIG_CMD_SOURCE	/* "source" command support	*/
+#define CONFIG_CMD_XIMG		/* Load part of Multi Image	*/
 
 /*
  * Autobooting
diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h
index 58f26fd..7ebbf25 100644
--- a/include/configs/grsim_leon2.h
+++ b/include/configs/grsim_leon2.h
@@ -64,21 +64,21 @@
 /*
  * Supported commands
  */
-#define CONFIG_CMD_AUTOSCRIPT	/* Autoscript Support           */
-#define CONFIG_CMD_BDI		/* bdinfo                       */
-#define CONFIG_CMD_CONSOLE	/* coninfo                      */
+#define CONFIG_CMD_BDI		/* bdinfo			*/
+#define CONFIG_CMD_CONSOLE	/* coninfo			*/
 #define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ECHO		/* echo arguments               */
-#define CONFIG_CMD_FPGA		/* FPGA configuration Support   */
+#define CONFIG_CMD_ECHO		/* echo arguments		*/
+#define CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ITEST	/* Integer (and string) test    */
-#define CONFIG_CMD_LOADB	/* loadb                        */
-#define CONFIG_CMD_LOADS	/* loads                        */
+#define CONFIG_CMD_ITEST	/* Integer (and string) test	*/
+#define CONFIG_CMD_LOADB	/* loadb			*/
+#define CONFIG_CMD_LOADS	/* loads			*/
 #define CONFIG_CMD_MISC		/* Misc functions like sleep etc */
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_RUN		/* run command in env variable  */
-#define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx           */
-#define CONFIG_CMD_XIMG		/* Load part of Multi Image     */
+#define CONFIG_CMD_RUN		/* run command in env variable	*/
+#define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx		*/
+#define CONFIG_CMD_SOURCE	/* "source" command support	*/
+#define CONFIG_CMD_XIMG		/* Load part of Multi Image	*/
 
 /*
  * Autobooting
diff --git a/include/configs/gth2.h b/include/configs/gth2.h
index b1b4842..677baea 100644
--- a/include/configs/gth2.h
+++ b/include/configs/gth2.h
@@ -90,18 +90,18 @@
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_DHCP
 
-#undef CONFIG_CMD_SAVEENV
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_ELF
 #undef CONFIG_CMD_FAT
 #undef CONFIG_CMD_FLASH
 #undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_ELF
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_MII
 #undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_SAVEENV
+#undef CONFIG_CMD_SOURCE
 
 
 /*
diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h
index 58b95f4..b2e37ec 100644
--- a/include/configs/keymile-common.h
+++ b/include/configs/keymile-common.h
@@ -240,7 +240,7 @@
 		"new_esw_0x${IVM_BoardId}_0x${IVM_HWKey}.scr \0"	\
 	"new_esw=run set_new_esw_script; "				\
 		"tftp ${autoscr_ws} ${new_esw_script}; "		\
-		"iminfo ${autoscr_ws}; autoscr ${autoscr_ws} \0"	\
+		"iminfo ${autoscr_ws}; source ${autoscr_ws} \0"	\
 	"bootlimit=0 \0" 						\
 	CONFIG_KM_DEF_ENV_IOMUX						\
 	CONFIG_KM_DEF_ENV_PRIVATE					\
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index d52a5e0..8f00773 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -93,7 +93,7 @@
  * 3 = 0x3C+0x3F = F3 + F6 :	enable test mode
  */
 
-#define CONFIG_BOOTCOMMAND "autoscr 40040000;saveenv"
+#define CONFIG_BOOTCOMMAND "source 40040000;saveenv"
 
 /*	"gatewayip=10.8.211.250\0"			                \ */
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
@@ -108,7 +108,7 @@
 	"key_magic2=3A+3C\0"						\
 	"key_cmd2=echo *** Entering Update Mode ***;"			\
 		"if fatload ide 0:3 10000 update.scr;"			\
-			"then autoscr 10000;"				\
+			"then source 10000;"				\
 			"else echo *** UPDATE FAILED ***;"		\
 		"fi\0"							\
 	"key_magic3=3C+3F\0"						\
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 05055c8..777a4d6 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -313,7 +313,7 @@
 		"cp.b 200000 FFF80000 80000\0"			        \
 	"upd=run load update\0"						\
 	"lwe_env=tftp 200000 /tftpboot.dev/lwmon5/env_uboot.bin;"	\
-		"autoscr 200000\0"					\
+		"source 200000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index 9ac7e9a..edaa174 100644
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -163,15 +163,15 @@
 
 #else
 
-    #define CONFIG_CMD_USB
     #define CONFIG_CMD_CACHE
+    #define CONFIG_CMD_USB
 
-    #undef CONFIG_CMD_AUTOSCRIPT
     #undef CONFIG_CMD_BDI
     #undef CONFIG_CMD_FPGA
     #undef CONFIG_CMD_IMI
     #undef CONFIG_CMD_LOADS
     #undef CONFIG_CMD_MISC
+    #undef CONFIG_CMD_SOURCE
 
 #endif
 
diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h
index 431e669..24fa144 100644
--- a/include/configs/mx1fs2.h
+++ b/include/configs/mx1fs2.h
@@ -51,12 +51,12 @@
 
 #define CONFIG_CMD_JFFS2
 
-#undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_NET
 #undef CONFIG_CMD_PING
-#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_SOURCE
 
 
 /*
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index 331bf45..1803b13 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -135,7 +135,7 @@
     #define CONFIG_CMD_I2C
     #define CONFIG_CMD_JFFS2
 
-    #undef CONFIG_CMD_AUTOSCRIPT
+    #undef CONFIG_CMD_SOURCE
 #endif
 
 
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 7db1eb7..5a948e4 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -174,7 +174,7 @@
 		"rootfstype=jffs2\0" \
 	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
-		"autoscr ${loadaddr}\0" \
+		"source ${loadaddr}\0" \
 	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 2f532d5..8cd8a1b 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -167,7 +167,7 @@
 		"rootfstype=jffs2\0" \
 	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
-		"autoscr ${loadaddr}\0" \
+		"source ${loadaddr}\0" \
 	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 0c32100..51b04b6 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -161,7 +161,7 @@
 		"rootfstype=jffs2\0" \
 	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
-		"autoscr ${loadaddr}\0" \
+		"source ${loadaddr}\0" \
 	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index fb4e50d..40107a6 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -163,7 +163,7 @@
 		"rootfstype=jffs2\0" \
 	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
-		"autoscr ${loadaddr}\0" \
+		"source ${loadaddr}\0" \
 	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 883234a..c60778c 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -171,7 +171,7 @@
 		"rootfstype=jffs2\0" \
 	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
-		"autoscr ${loadaddr}\0" \
+		"source ${loadaddr}\0" \
 	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index 5b68ef9..97e1da2 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -122,7 +122,7 @@
 	"rootpath=/opt/eldk/ppc_4xx\0"					\
 	"bootfile=/tftpboot/sc3/uImage\0"				\
 	"u-boot=/tftpboot/sc3/u-boot.bin\0"				\
-	"setup=tftp 200000 /tftpboot/sc3/setup.img;autoscr 200000\0"	\
+	"setup=tftp 200000 /tftpboot/sc3/setup.img;source 200000\0"	\
 	"kernel_addr=FFE08000\0"					\
 	""
 #undef CONFIG_BOOTCOMMAND
@@ -186,20 +186,20 @@
 #include <config_cmd_default.h>
 
 
-#define CONFIG_CMD_AUTOSCRIPT
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IDE
+#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SOURCE
 
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
index 2f166c9..893c3d3 100644
--- a/include/configs/scb9328.h
+++ b/include/configs/scb9328.h
@@ -54,9 +54,9 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 
-#undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
 
 
 /*
diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h
index 5a5f772..147233d 100644
--- a/include/configs/stxxtc.h
+++ b/include/configs/stxxtc.h
@@ -68,7 +68,7 @@
 	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "	\
 	"bootm"
 
-#define CONFIG_AUTOSCRIPT
+#define CONFIG_SOURCE
 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
 #undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
diff --git a/include/configs/vct.h b/include/configs/vct.h
index 5371e2d..d202522 100644
--- a/include/configs/vct.h
+++ b/include/configs/vct.h
@@ -301,38 +301,38 @@
  * (NOR/OneNAND) usage and Linux kernel booting.
  */
 #if defined(CONFIG_VCT_SMALL_IMAGE)
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_SNTP
-#undef CONFIG_CMD_ELF
-#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_CACHE
-#undef CONFIG_CMD_BEDBUG
-#undef CONFIG_CMD_AUTOSCRIPT
-#undef CONFIG_CMD_IRQ
-#undef CONFIG_CMD_ITEST
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_MISC
-#undef CONFIG_CMD_REGINFO
-#undef CONFIG_CMD_STRINGS
-#undef CONFIG_CMD_TERMINAL
 #undef CONFIG_CMD_ASKENV
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_CACHE
+#undef CONFIG_CMD_CONSOLE
 #undef CONFIG_CMD_CRC32
 #undef CONFIG_CMD_DHCP
 #undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_FAT
 #undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_IRQ
+#undef CONFIG_CMD_ITEST
 #undef CONFIG_CMD_LOADB
 #undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_LOADY
-#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_MISC
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_PING
+#undef CONFIG_CMD_REGINFO
+#undef CONFIG_CMD_SNTP
+#undef CONFIG_CMD_SOURCE
+#undef CONFIG_CMD_STRINGS
+#undef CONFIG_CMD_TERMINAL
 #undef CONFIG_CMD_USB
-#undef CONFIG_CMD_FAT
 
 #undef CONFIG_DRIVER_SMC911X
 #undef CONFIG_SOFT_I2C
-#undef CONFIG_AUTOSCRIPT
+#undef CONFIG_SOURCE
 #undef CONFIG_SYS_LONGHELP
 #undef CONFIG_TIMESTAMP
 #endif /* CONFIG_VCT_SMALL_IMAGE */
diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h
index 717577f..e74303d 100644
--- a/include/configs/wepep250.h
+++ b/include/configs/wepep250.h
@@ -49,10 +49,10 @@
  */
 #include <config_cmd_default.h>
 
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_SOURCE
 
 
 /*