blob: 0180082ca34579c30843dab4c302694b051a2be5 [file] [log] [blame]
/**
* Copyright 2014 Freescale Semiconductor
*
* Author: Chunhe Lan <Chunhe.Lan@freescale.com>
*
* SPDX-License-Identifier: GPL-2.0+
*
* This file provides support for the ngPIXIS, a board-specific FPGA used on
* some Freescale reference boards.
*/
/*
* CPLD register set. Feel free to add board-specific #ifdefs where necessary.
*/
struct cpld_data {
u8 chip_id1; /* 0x00 - CPLD Chip ID1 Register */
u8 chip_id2; /* 0x01 - CPLD Chip ID2 Register */
u8 sw_maj_ver; /* 0x02 - CPLD Code Major Version Register */
u8 sw_min_ver; /* 0x03 - CPLD Code Minor Version Register */
u8 hw_ver; /* 0x04 - PCBA Version Register */
u8 software_on; /* 0x05 - Override Physical Switch Enable Register */
u8 cfg_rcw_src; /* 0x06 - RCW Source Location Control Register */
u8 res0; /* 0x07 - not used */
u8 vbank; /* 0x08 - Flash Bank Selection Control Register */
u8 sw1_sysclk; /* 0x09 - SW1 Status Read Back Register */
u8 sw2_status; /* 0x0a - SW2 Status Read Back Register */
u8 sw3_status; /* 0x0b - SW3 Status Read Back Register */
u8 sw4_status; /* 0x0c - SW4 Status Read Back Register */
u8 sys_reset; /* 0x0d - Reset System With Reserving Registers Value*/
u8 global_reset;/* 0x0e - Reset System With Default Registers Value */
u8 res1; /* 0x0f - not used */
};
#define CPLD_BANK_SEL_MASK 0x07
#define CPLD_BANK_SEL_EN 0x04
#define CPLD_SYSTEM_RESET 0x01
#define CPLD_SELECT_BANK0 0x00
#define CPLD_SELECT_BANK4 0x04
#define CPLD_DEFAULT_BANK 0x01
/* Pointer to the CPLD register set */
u8 cpld_read(unsigned int reg);
void cpld_write(unsigned int reg, u8 value);
#define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg))
#define CPLD_WRITE(reg, value) \
cpld_write(offsetof(struct cpld_data, reg), value)