| /* |
| * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com> |
| * |
| * Based on dockstar.h originally written by |
| * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu> |
| * |
| * Based on sheevaplug.h originally written by |
| * Prafulla Wadaskar <prafulla@marvell.com> |
| * (C) Copyright 2009 |
| * Marvell Semiconductor <www.marvell.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef _CONFIG_GOFLEXHOME_H |
| #define _CONFIG_GOFLEXHOME_H |
| |
| /* |
| * Version number information |
| */ |
| #define CONFIG_IDENT_STRING "\nSeagate GoFlex Home" |
| |
| /* |
| * High Level Configuration Options (easy to change) |
| */ |
| #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ |
| #define CONFIG_KW88F6281 1 /* SOC Name */ |
| #define CONFIG_MACH_GOFLEXHOME /* Machine type */ |
| #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ |
| |
| /* |
| * Default GPIO configuration and LED status |
| */ |
| #define GOFLEXHOME_OE_LOW (~(0)) |
| #define GOFLEXHOME_OE_HIGH (~(0)) |
| #define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */ |
| #define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */ |
| |
| /* PHY related */ |
| #define MV88E1116_LED_FCTRL_REG 10 |
| #define MV88E1116_CPRSP_CR3_REG 21 |
| #define MV88E1116_MAC_CTRL_REG 21 |
| #define MV88E1116_PGADR_REG 22 |
| #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) |
| #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) |
| |
| /* |
| * Commands configuration |
| */ |
| #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ |
| #define CONFIG_CONSOLE_MUX |
| #define CONFIG_SYS_CONSOLE_IS_IN_ENV |
| |
| #include <config_cmd_default.h> |
| #define CONFIG_CMD_DHCP |
| #define CONFIG_CMD_ENV |
| #define CONFIG_CMD_MII |
| #define CONFIG_CMD_NAND |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_USB |
| #define CONFIG_CMD_IDE |
| #define CONFIG_CMD_DATE |
| #define CONFIG_CMD_EXT4 |
| #define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */ |
| |
| /* |
| * mv-common.h should be defined after CMD configs since it used them |
| * to enable certain macros |
| */ |
| #include "mv-common.h" |
| |
| #undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ |
| #define CONFIG_SYS_PROMPT "GoFlexHome> " /* Command Prompt */ |
| |
| /* |
| * Environment variables configurations |
| */ |
| #ifdef CONFIG_CMD_NAND |
| #define CONFIG_ENV_IS_IN_NAND 1 |
| #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ |
| #else |
| #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ |
| #endif |
| /* |
| * max 4k env size is enough, but in case of nand |
| * it has to be rounded to sector size |
| */ |
| #define CONFIG_ENV_SIZE 0x20000 /* 128k */ |
| #define CONFIG_ENV_ADDR 0xC0000 |
| #define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */ |
| |
| /* |
| * Default environment variables |
| */ |
| #define CONFIG_BOOTCOMMAND \ |
| "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ |
| "ubi part root; " \ |
| "ubifsmount ubi:root; " \ |
| "ubifsload 0x800000 ${kernel}; " \ |
| "bootm 0x800000" |
| |
| #define CONFIG_MTDPARTS \ |
| "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0" |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "console=console=ttyS0,115200\0" \ |
| "mtdids=nand0=orion_nand\0" \ |
| "mtdparts="CONFIG_MTDPARTS \ |
| "kernel=/boot/uImage\0" \ |
| "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0" |
| |
| /* |
| * Ethernet Driver configuration |
| */ |
| #ifdef CONFIG_CMD_NET |
| #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ |
| #define CONFIG_PHY_BASE_ADR 0 |
| #endif /* CONFIG_CMD_NET */ |
| |
| /* |
| * * SATA Driver configuration |
| * */ |
| #ifdef CONFIG_MVSATA_IDE |
| #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET |
| #endif /*CONFIG_MVSATA_IDE*/ |
| |
| /* |
| * * RTC driver configuration |
| * */ |
| #ifdef CONFIG_CMD_DATE |
| #define CONFIG_RTC_MV |
| #endif /* CONFIG_CMD_DATE */ |
| |
| #endif /* _CONFIG_GOFLEXHOME_H */ |
