)]}'
{
  "commit": "7ec8bb15ee368ea54d48d64867767a704d9ab4c2",
  "tree": "4e2df3fe3e56fca089d31ac9d3f4b17bd82115cd",
  "parents": [
    "16158778b5f52f201e95ded2d2d9084b0ed5670d"
  ],
  "author": {
    "name": "Wolfgang Denk",
    "email": "wd@denx.de",
    "time": "Thu Dec 27 10:56:54 2007 +0100"
  },
  "committer": {
    "name": "Wolfgang Denk",
    "email": "wd@denx.de",
    "time": "Tue Feb 05 00:04:15 2008 +0100"
  },
  "message": "OMAP5912: fix FIFO handling in UART driver\n\nAccording to the OMAP5912 Serial Interfaces Reference Guide (see\nhttp://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the\nFIFO_EN enable bit in the FIFO Control Register (FCR) can only be\nchanged when the baud clock is not running, i. e. when both DLL and\nDLH are set to 0.\n\nThus make sure that DLL and DLH are 0 when writing the FCR.\n\nSigned-off-by: Wolfgang Denk \u003cwd@denx.de\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "2429464d89656f167480ba0efc4af7fb4584adf0",
      "old_mode": 33188,
      "old_path": "drivers/serial/ns16550.c",
      "new_id": "6b3f60eb575c3d9eaf31f92da5a169a58167e677",
      "new_mode": 33188,
      "new_path": "drivers/serial/ns16550.c"
    }
  ]
}