)]}'
{
  "commit": "836cd453583627cbef784bd4d7963109d5914bde",
  "tree": "0f17601188fa2d0f218fecb90a5c956c5da7b432",
  "parents": [
    "409943a98961661fd93fb055a3d302184901dda5"
  ],
  "author": {
    "name": "Eric Bénard",
    "email": "eric@eukrea.com",
    "time": "Mon Jun 21 09:40:43 2010 +0200"
  },
  "committer": {
    "name": "Ben Warren",
    "email": "biggerbadderben@gmail.com",
    "time": "Mon Jul 12 00:14:29 2010 -0700"
  },
  "message": "cpuat91: unbreak ethernet\n\n* the following problems are met :\nconfig was set to use the new driver as a default but\n- RMII was not enabled for the new driver\n- the new driver didn\u0027t compile with RMII enabled\n- the new driver initialize a PHY at address O when the PHY of\nthis board is at 1 thus we get \"AT91 EMAC RMII: No PHY present\"\n\n* to fix these problems, this patch :\n- enable RMII for the new driver\n- fix the wrong define used in the at91_emac.c\n- allow the config file to set a default phy address (and use\n0 as a default as in the actual at91_emac.c driver)\n\nSigned-off-by: Eric Bénard \u003ceric@eukrea.com\u003e\nSigned-off-by: Ben Warren \u003cbiggerbadderben@gmail.com\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "fa72e2cabdf8e4e3a0a89c334eff42b6034e16f0",
      "old_mode": 33188,
      "old_path": "drivers/net/at91_emac.c",
      "new_id": "245da121b94d520e12eb562641c12945ae6aaa8c",
      "new_mode": 33188,
      "new_path": "drivers/net/at91_emac.c"
    },
    {
      "type": "modify",
      "old_id": "b4fda767310e88c0e18c68cf2a234dd8d8583e1e",
      "old_mode": 33188,
      "old_path": "include/configs/cpuat91.h",
      "new_id": "049298cfa3635bb5072cfde93d4bc290362c8f65",
      "new_mode": 33188,
      "new_path": "include/configs/cpuat91.h"
    }
  ]
}