diff --git a/common/cmd_load.c b/common/cmd_load.c
new file mode 100644
index 0000000..d784e83
--- /dev/null
+++ b/common/cmd_load.c
@@ -0,0 +1,1057 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Serial up- and download support
+ */
+#include <common.h>
+#include <command.h>
+#include <cmd_autoscript.h>
+#include <s_record.h>
+#include <net.h>
+#include <syscall.h>
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_LOADS)
+static ulong load_serial (ulong offset);
+static int read_record (char *buf, ulong len);
+# if (CONFIG_COMMANDS & CFG_CMD_SAVES)
+static int save_serial (ulong offset, ulong size);
+static int write_record (char *buf);
+# endif /* CFG_CMD_SAVES */
+
+static int do_echo = 1;
+#endif /* CFG_CMD_LOADS */
+
+/* -------------------------------------------------------------------- */
+
+#if (CONFIG_COMMANDS & CFG_CMD_LOADS)
+int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	ulong offset = 0;
+	ulong addr;
+	int i;
+	char *env_echo;
+	int rcode = 0;
+#ifdef	CFG_LOADS_BAUD_CHANGE
+	DECLARE_GLOBAL_DATA_PTR;
+	int load_baudrate, current_baudrate;
+
+	load_baudrate = current_baudrate = gd->baudrate;
+#endif
+
+	if (((env_echo = getenv("loads_echo")) != NULL) && (*env_echo == '1')) {
+		do_echo = 1;
+	} else {
+		do_echo = 0;
+	}
+
+#ifdef	CFG_LOADS_BAUD_CHANGE
+	if (argc >= 2) {
+		offset = simple_strtoul(argv[1], NULL, 16);
+	}
+	if (argc == 3) {
+		load_baudrate = (int)simple_strtoul(argv[2], NULL, 10);
+
+		/* default to current baudrate */
+		if (load_baudrate == 0)
+			load_baudrate = current_baudrate;
+	}
+	if (load_baudrate != current_baudrate) {
+		printf ("## Switch baudrate to %d bps and press ENTER ...\n",
+			load_baudrate);
+		udelay(50000);
+		gd->baudrate = load_baudrate;
+		serial_setbrg ();
+		udelay(50000);
+		for (;;) {
+			if (getc() == '\r')
+				break;
+		}
+	}
+#else	/* ! CFG_LOADS_BAUD_CHANGE */
+	if (argc == 2) {
+		offset = simple_strtoul(argv[1], NULL, 16);
+	}
+#endif	/* CFG_LOADS_BAUD_CHANGE */
+
+	printf ("## Ready for S-Record download ...\n");
+
+	addr = load_serial (offset);
+
+	/*
+	 * Gather any trailing characters (for instance, the ^D which
+	 * is sent by 'cu' after sending a file), and give the
+	 * box some time (100 * 1 ms)
+	 */
+	for (i=0; i<100; ++i) {
+		if (serial_tstc()) {
+			(void) serial_getc();
+		}
+		udelay(1000);
+	}
+
+	if (addr == ~0) {
+		printf ("## S-Record download aborted\n");
+		rcode = 1;
+	} else {
+		printf ("## Start Addr      = 0x%08lX\n", addr);
+		load_addr = addr;
+	}
+
+#ifdef	CFG_LOADS_BAUD_CHANGE
+	if (load_baudrate != current_baudrate) {
+		printf ("## Switch baudrate to %d bps and press ESC ...\n",
+			current_baudrate);
+		udelay (50000);
+		gd->baudrate = current_baudrate;
+		serial_setbrg ();
+		udelay (50000);
+		for (;;) {
+			if (getc() == 0x1B) /* ESC */
+				break;
+		}
+	}
+#endif
+	return rcode;
+}
+
+static ulong
+load_serial (ulong offset)
+{
+	char	record[SREC_MAXRECLEN + 1];	/* buffer for one S-Record	*/
+	char	binbuf[SREC_MAXBINLEN];		/* buffer for binary data	*/
+	int	binlen;				/* no. of data bytes in S-Rec.	*/
+	int	type;				/* return code for record type	*/
+	ulong	addr;				/* load address from S-Record	*/
+	ulong	size;				/* number of bytes transferred	*/
+	char	buf[32];
+	ulong	store_addr;
+	ulong	start_addr = ~0;
+	ulong	end_addr   =  0;
+	int	line_count =  0;
+
+	while (read_record(record, SREC_MAXRECLEN + 1) >= 0) {
+		type = srec_decode (record, &binlen, &addr, binbuf);
+
+		if (type < 0) {
+			return (~0);		/* Invalid S-Record		*/
+		}
+
+		switch (type) {
+		case SREC_DATA2:
+		case SREC_DATA3:
+		case SREC_DATA4:
+		    store_addr = addr + offset;
+#ifndef CFG_NO_FLASH
+		    if (addr2info(store_addr)) {
+			int rc;
+
+			rc = flash_write((uchar *)binbuf,store_addr,binlen);
+			if (rc != 0) {
+				flash_perror (rc);
+				return (~0);
+			}
+		    } else
+#endif
+		    {
+			memcpy ((char *)(store_addr), binbuf, binlen);
+		    }
+		    if ((store_addr) < start_addr)
+			start_addr = store_addr;
+		    if ((store_addr + binlen - 1) > end_addr)
+			end_addr = store_addr + binlen - 1;
+		    break;
+		case SREC_END2:
+		case SREC_END3:
+		case SREC_END4:
+		    udelay (10000);
+		    size = end_addr - start_addr + 1;
+		    printf ("\n"
+			    "## First Load Addr = 0x%08lX\n"
+			    "## Last  Load Addr = 0x%08lX\n"
+			    "## Total Size      = 0x%08lX = %ld Bytes\n",
+			    start_addr, end_addr, size, size
+		    );
+		    flush_cache (addr, size);
+		    sprintf(buf, "%lX", size);
+		    setenv("filesize", buf);
+		    return (addr);
+		case SREC_START:
+		    break;
+		default:
+		    break;
+		}
+		if (!do_echo) {	/* print a '.' every 100 lines */
+			if ((++line_count % 100) == 0)
+				putc ('.');
+		}
+	}
+
+	return (~0);			/* Download aborted		*/
+}
+
+static int
+read_record (char *buf, ulong len)
+{
+	char *p;
+	char c;
+
+	--len;	/* always leave room for terminating '\0' byte */
+
+	for (p=buf; p < buf+len; ++p) {
+		c = serial_getc();		/* read character		*/
+		if (do_echo)
+			serial_putc (c);	/* ... and echo it		*/
+
+		switch (c) {
+		case '\r':
+		case '\n':
+			*p = '\0';
+			return (p - buf);
+		case '\0':
+		case 0x03:			/* ^C - Control C		*/
+			return (-1);
+		default:
+			*p = c;
+		}
+
+	    /* Check for the console hangup (if any different from serial) */
+#ifdef CONFIG_PPC	/* we don't have syscall_tbl anywhere else */
+	    if (syscall_tbl[SYSCALL_GETC] != serial_getc) {
+		if (ctrlc()) {
+		    return (-1);
+		}
+	    }
+#endif
+	}
+
+	/* line too long - truncate */
+	*p = '\0';
+	return (p - buf);
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_SAVES)
+
+int do_save_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	ulong offset = 0;
+	ulong size   = 0;
+#ifdef	CFG_LOADS_BAUD_CHANGE
+	DECLARE_GLOBAL_DATA_PTR;
+	int save_baudrate, current_baudrate;
+
+	save_baudrate = current_baudrate = gd->baudrate;
+#endif
+
+	if (argc >= 2) {
+		offset = simple_strtoul(argv[1], NULL, 16);
+	}
+#ifdef	CFG_LOADS_BAUD_CHANGE
+	if (argc >= 3) {
+		size = simple_strtoul(argv[2], NULL, 16);
+	}
+	if (argc == 4) {
+		save_baudrate = (int)simple_strtoul(argv[3], NULL, 10);
+
+		/* default to current baudrate */
+		if (save_baudrate == 0)
+			save_baudrate = current_baudrate;
+	}
+	if (save_baudrate != current_baudrate) {
+		printf ("## Switch baudrate to %d bps and press ENTER ...\n",
+			save_baudrate);
+		udelay(50000);
+		gd->baudrate = save_baudrate;
+		serial_setbrg ();
+		udelay(50000);
+		for (;;) {
+			if (getc() == '\r')
+				break;
+		}
+	}
+#else	/* ! CFG_LOADS_BAUD_CHANGE */
+	if (argc == 3) {
+		size = simple_strtoul(argv[2], NULL, 16);
+	}
+#endif	/* CFG_LOADS_BAUD_CHANGE */
+
+	printf ("## Ready for S-Record upload, press ENTER to proceed ...\n");
+	for (;;) {
+		if (getc() == '\r')
+			break;
+	}
+	if(save_serial (offset, size)) {
+		printf ("## S-Record upload aborted\n");
+	} else {
+		printf ("## S-Record upload complete\n");
+	}
+#ifdef	CFG_LOADS_BAUD_CHANGE
+	if (save_baudrate != current_baudrate) {
+		printf ("## Switch baudrate to %d bps and press ESC ...\n",
+			(int)current_baudrate);
+		udelay (50000);
+		gd->baudrate = current_baudrate;
+		serial_setbrg ();
+		udelay (50000);
+		for (;;) {
+			if (getc() == 0x1B) /* ESC */
+				break;
+		}
+	}
+#endif
+	return 0;
+}
+
+#define SREC3_START				"S0030000FC\n"
+#define SREC3_FORMAT			"S3%02X%08lX%s%02X\n"
+#define SREC3_END				"S70500000000FA\n"
+#define SREC_BYTES_PER_RECORD	16
+
+static int save_serial (ulong address, ulong count)
+{
+	int i, c, reclen, checksum, length;
+	char *hex = "0123456789ABCDEF";
+	char	record[2*SREC_BYTES_PER_RECORD+16];	/* buffer for one S-Record	*/
+	char	data[2*SREC_BYTES_PER_RECORD+1];	/* buffer for hex data	*/
+
+	reclen = 0;
+	checksum  = 0;
+
+	if(write_record(SREC3_START))			/* write the header */
+		return (-1);
+	do {
+		if(count) {						/* collect hex data in the buffer  */
+			c = *(volatile uchar*)(address + reclen);	/* get one byte    */
+			checksum += c;							/* accumulate checksum */
+			data[2*reclen]   = hex[(c>>4)&0x0f];
+			data[2*reclen+1] = hex[c & 0x0f];
+			data[2*reclen+2] = '\0';
+			++reclen;
+			--count;
+		}
+		if(reclen == SREC_BYTES_PER_RECORD || count == 0) {
+			/* enough data collected for one record: dump it */
+			if(reclen) {	/* build & write a data record: */
+				/* address + data + checksum */
+				length = 4 + reclen + 1;
+
+				/* accumulate length bytes into checksum */
+				for(i = 0; i < 2; i++)
+					checksum += (length >> (8*i)) & 0xff;
+
+				/* accumulate address bytes into checksum: */
+				for(i = 0; i < 4; i++)
+					checksum += (address >> (8*i)) & 0xff;
+
+				/* make proper checksum byte: */
+				checksum = ~checksum & 0xff;
+
+				/* output one record: */
+				sprintf(record, SREC3_FORMAT, length, address, data, checksum);
+				if(write_record(record))
+					return (-1);
+			}
+			address  += reclen;  /* increment address */
+			checksum  = 0;
+			reclen    = 0;
+		}
+	}
+	while(count);
+	if(write_record(SREC3_END))	/* write the final record */
+		return (-1);
+	return(0);
+}
+
+static int
+write_record (char *buf)
+{
+	char c;
+
+	while((c = *buf++))
+		serial_putc(c);
+
+	/* Check for the console hangup (if any different from serial) */
+
+	if (ctrlc()) {
+	    return (-1);
+	}
+	return (0);
+}
+# endif /* CFG_CMD_SAVES */
+
+#endif	/* CFG_CMD_LOADS */
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_LOADB)  /* loadb command (load binary) included */
+
+#define XON_CHAR        17
+#define XOFF_CHAR       19
+#define START_CHAR      0x01
+#define ETX_CHAR	0x03
+#define END_CHAR        0x0D
+#define SPACE           0x20
+#define K_ESCAPE        0x23
+#define SEND_TYPE       'S'
+#define DATA_TYPE       'D'
+#define ACK_TYPE        'Y'
+#define NACK_TYPE       'N'
+#define BREAK_TYPE      'B'
+#define tochar(x) ((char) (((x) + SPACE) & 0xff))
+#define untochar(x) ((int) (((x) - SPACE) & 0xff))
+
+extern int os_data_count;
+extern int os_data_header[8];
+
+static void set_kerm_bin_mode(unsigned long *);
+static int k_recv(void);
+static ulong load_serial_bin (ulong offset);
+
+
+char his_eol;        /* character he needs at end of packet */
+int  his_pad_count;  /* number of pad chars he needs */
+char his_pad_char;   /* pad chars he needs */
+char his_quote;      /* quote chars he'll use */
+
+int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	ulong offset = 0;
+	ulong addr;
+	int load_baudrate, current_baudrate;
+	int rcode = 0;
+	char *s;
+
+	/* pre-set offset from CFG_LOAD_ADDR */
+	offset = CFG_LOAD_ADDR;
+
+	/* pre-set offset from $loadaddr */
+	if ((s = getenv("loadaddr")) != NULL) {
+		offset = simple_strtoul(s, NULL, 16);
+	}
+
+	load_baudrate = current_baudrate = gd->baudrate;
+
+	if (argc >= 2) {
+		offset = simple_strtoul(argv[1], NULL, 16);
+	}
+	if (argc == 3) {
+		load_baudrate = (int)simple_strtoul(argv[2], NULL, 10);
+
+		/* default to current baudrate */
+		if (load_baudrate == 0)
+			load_baudrate = current_baudrate;
+	}
+
+	if (load_baudrate != current_baudrate) {
+		printf ("## Switch baudrate to %d bps and press ENTER ...\n",
+			load_baudrate);
+		udelay(50000);
+		gd->baudrate = load_baudrate;
+		serial_setbrg ();
+		udelay(50000);
+		for (;;) {
+			if (getc() == '\r')
+				break;
+		}
+	}
+
+	printf ("## Ready for binary (kermit) download "
+		"to 0x%08lX at %d bps...\n",
+		offset,
+		current_baudrate);
+	addr = load_serial_bin (offset);
+
+	if (addr == ~0) {
+		load_addr = 0;
+		printf ("## Binary (kermit) download aborted\n");
+		rcode = 1;
+	} else {
+		printf ("## Start Addr      = 0x%08lX\n", addr);
+		load_addr = addr;
+	}
+
+	if (load_baudrate != current_baudrate) {
+		printf ("## Switch baudrate to %d bps and press ESC ...\n",
+			current_baudrate);
+		udelay (50000);
+		gd->baudrate = current_baudrate;
+		serial_setbrg ();
+		udelay (50000);
+		for (;;) {
+			if (getc() == 0x1B) /* ESC */
+				break;
+		}
+	}
+
+#ifdef CONFIG_AUTOSCRIPT
+	if (load_addr) {
+		char *s;
+
+		if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) {
+			printf("Running autoscript at addr 0x%08lX ...\n", load_addr);
+			rcode = autoscript (load_addr);
+		}
+	}
+#endif
+	return rcode;
+}
+
+
+static ulong load_serial_bin (ulong offset)
+{
+	int size, i;
+	char buf[32];
+
+	set_kerm_bin_mode ((ulong *) offset);
+	size = k_recv ();
+
+	/*
+	 * Gather any trailing characters (for instance, the ^D which
+	 * is sent by 'cu' after sending a file), and give the
+	 * box some time (100 * 1 ms)
+	 */
+	for (i=0; i<100; ++i) {
+		if (serial_tstc()) {
+			(void) serial_getc();
+		}
+		udelay(1000);
+	}
+
+	flush_cache (offset, size);
+
+	printf("## Total Size      = 0x%08x = %d Bytes\n", size, size);
+	sprintf(buf, "%X", size);
+	setenv("filesize", buf);
+
+	return offset;
+}
+
+void send_pad (void)
+{
+	int count = his_pad_count;
+
+	while (count-- > 0)
+		serial_putc (his_pad_char);
+}
+
+/* converts escaped kermit char to binary char */
+char ktrans (char in)
+{
+	if ((in & 0x60) == 0x40) {
+		return (char) (in & ~0x40);
+	} else if ((in & 0x7f) == 0x3f) {
+		return (char) (in | 0x40);
+	} else
+		return in;
+}
+
+int chk1 (char *buffer)
+{
+	int total = 0;
+
+	while (*buffer) {
+		total += *buffer++;
+	}
+	return (int) ((total + ((total >> 6) & 0x03)) & 0x3f);
+}
+
+void s1_sendpacket (char *packet)
+{
+	send_pad ();
+	while (*packet) {
+		serial_putc (*packet++);
+	}
+}
+
+static char a_b[24];
+void send_ack (int n)
+{
+	a_b[0] = START_CHAR;
+	a_b[1] = tochar (3);
+	a_b[2] = tochar (n);
+	a_b[3] = ACK_TYPE;
+	a_b[4] = '\0';
+	a_b[4] = tochar (chk1 (&a_b[1]));
+	a_b[5] = his_eol;
+	a_b[6] = '\0';
+	s1_sendpacket (a_b);
+}
+
+void send_nack (int n)
+{
+	a_b[0] = START_CHAR;
+	a_b[1] = tochar (3);
+	a_b[2] = tochar (n);
+	a_b[3] = NACK_TYPE;
+	a_b[4] = '\0';
+	a_b[4] = tochar (chk1 (&a_b[1]));
+	a_b[5] = his_eol;
+	a_b[6] = '\0';
+	s1_sendpacket (a_b);
+}
+
+
+/* os_data_* takes an OS Open image and puts it into memory, and
+   puts the boot header in an array named os_data_header
+
+   if image is binary, no header is stored in os_data_header.
+*/
+void (*os_data_init) (void);
+void (*os_data_char) (char new_char);
+static int os_data_state, os_data_state_saved;
+int os_data_count;
+static int os_data_count_saved;
+static char *os_data_addr, *os_data_addr_saved;
+static char *bin_start_address;
+int os_data_header[8];
+static void bin_data_init (void)
+{
+	os_data_state = 0;
+	os_data_count = 0;
+	os_data_addr = bin_start_address;
+}
+static void os_data_save (void)
+{
+	os_data_state_saved = os_data_state;
+	os_data_count_saved = os_data_count;
+	os_data_addr_saved = os_data_addr;
+}
+static void os_data_restore (void)
+{
+	os_data_state = os_data_state_saved;
+	os_data_count = os_data_count_saved;
+	os_data_addr = os_data_addr_saved;
+}
+static void bin_data_char (char new_char)
+{
+	switch (os_data_state) {
+	case 0:					/* data */
+		*os_data_addr++ = new_char;
+		--os_data_count;
+		break;
+	}
+}
+static void set_kerm_bin_mode (unsigned long *addr)
+{
+	bin_start_address = (char *) addr;
+	os_data_init = bin_data_init;
+	os_data_char = bin_data_char;
+}
+
+
+/* k_data_* simply handles the kermit escape translations */
+static int k_data_escape, k_data_escape_saved;
+void k_data_init (void)
+{
+	k_data_escape = 0;
+	os_data_init ();
+}
+void k_data_save (void)
+{
+	k_data_escape_saved = k_data_escape;
+	os_data_save ();
+}
+void k_data_restore (void)
+{
+	k_data_escape = k_data_escape_saved;
+	os_data_restore ();
+}
+void k_data_char (char new_char)
+{
+	if (k_data_escape) {
+		/* last char was escape - translate this character */
+		os_data_char (ktrans (new_char));
+		k_data_escape = 0;
+	} else {
+		if (new_char == his_quote) {
+			/* this char is escape - remember */
+			k_data_escape = 1;
+		} else {
+			/* otherwise send this char as-is */
+			os_data_char (new_char);
+		}
+	}
+}
+
+#define SEND_DATA_SIZE  20
+char send_parms[SEND_DATA_SIZE];
+char *send_ptr;
+
+/* handle_send_packet interprits the protocol info and builds and
+   sends an appropriate ack for what we can do */
+void handle_send_packet (int n)
+{
+	int length = 3;
+	int bytes;
+
+	/* initialize some protocol parameters */
+	his_eol = END_CHAR;		/* default end of line character */
+	his_pad_count = 0;
+	his_pad_char = '\0';
+	his_quote = K_ESCAPE;
+
+	/* ignore last character if it filled the buffer */
+	if (send_ptr == &send_parms[SEND_DATA_SIZE - 1])
+		--send_ptr;
+	bytes = send_ptr - send_parms;	/* how many bytes we'll process */
+	do {
+		if (bytes-- <= 0)
+			break;
+		/* handle MAXL - max length */
+		/* ignore what he says - most I'll take (here) is 94 */
+		a_b[++length] = tochar (94);
+		if (bytes-- <= 0)
+			break;
+		/* handle TIME - time you should wait for my packets */
+		/* ignore what he says - don't wait for my ack longer than 1 second */
+		a_b[++length] = tochar (1);
+		if (bytes-- <= 0)
+			break;
+		/* handle NPAD - number of pad chars I need */
+		/* remember what he says - I need none */
+		his_pad_count = untochar (send_parms[2]);
+		a_b[++length] = tochar (0);
+		if (bytes-- <= 0)
+			break;
+		/* handle PADC - pad chars I need */
+		/* remember what he says - I need none */
+		his_pad_char = ktrans (send_parms[3]);
+		a_b[++length] = 0x40;	/* He should ignore this */
+		if (bytes-- <= 0)
+			break;
+		/* handle EOL - end of line he needs */
+		/* remember what he says - I need CR */
+		his_eol = untochar (send_parms[4]);
+		a_b[++length] = tochar (END_CHAR);
+		if (bytes-- <= 0)
+			break;
+		/* handle QCTL - quote control char he'll use */
+		/* remember what he says - I'll use '#' */
+		his_quote = send_parms[5];
+		a_b[++length] = '#';
+		if (bytes-- <= 0)
+			break;
+		/* handle QBIN - 8-th bit prefixing */
+		/* ignore what he says - I refuse */
+		a_b[++length] = 'N';
+		if (bytes-- <= 0)
+			break;
+		/* handle CHKT - the clock check type */
+		/* ignore what he says - I do type 1 (for now) */
+		a_b[++length] = '1';
+		if (bytes-- <= 0)
+			break;
+		/* handle REPT - the repeat prefix */
+		/* ignore what he says - I refuse (for now) */
+		a_b[++length] = 'N';
+		if (bytes-- <= 0)
+			break;
+		/* handle CAPAS - the capabilities mask */
+		/* ignore what he says - I only do long packets - I don't do windows */
+		a_b[++length] = tochar (2);	/* only long packets */
+		a_b[++length] = tochar (0);	/* no windows */
+		a_b[++length] = tochar (94);	/* large packet msb */
+		a_b[++length] = tochar (94);	/* large packet lsb */
+	} while (0);
+
+	a_b[0] = START_CHAR;
+	a_b[1] = tochar (length);
+	a_b[2] = tochar (n);
+	a_b[3] = ACK_TYPE;
+	a_b[++length] = '\0';
+	a_b[length] = tochar (chk1 (&a_b[1]));
+	a_b[++length] = his_eol;
+	a_b[++length] = '\0';
+	s1_sendpacket (a_b);
+}
+
+/* k_recv receives a OS Open image file over kermit line */
+static int k_recv (void)
+{
+	char new_char;
+	char k_state, k_state_saved;
+	int sum;
+	int done;
+	int length;
+	int n, last_n;
+	int z = 0;
+	int len_lo, len_hi;
+
+	/* initialize some protocol parameters */
+	his_eol = END_CHAR;		/* default end of line character */
+	his_pad_count = 0;
+	his_pad_char = '\0';
+	his_quote = K_ESCAPE;
+
+	/* initialize the k_recv and k_data state machine */
+	done = 0;
+	k_state = 0;
+	k_data_init ();
+	k_state_saved = k_state;
+	k_data_save ();
+	n = 0;				/* just to get rid of a warning */
+	last_n = -1;
+
+	/* expect this "type" sequence (but don't check):
+	   S: send initiate
+	   F: file header
+	   D: data (multiple)
+	   Z: end of file
+	   B: break transmission
+	 */
+
+	/* enter main loop */
+	while (!done) {
+		/* set the send packet pointer to begining of send packet parms */
+		send_ptr = send_parms;
+
+		/* With each packet, start summing the bytes starting with the length.
+		   Save the current sequence number.
+		   Note the type of the packet.
+		   If a character less than SPACE (0x20) is received - error.
+		 */
+
+#if 0
+		/* OLD CODE, Prior to checking sequence numbers */
+		/* first have all state machines save current states */
+		k_state_saved = k_state;
+		k_data_save ();
+#endif
+
+		/* get a packet */
+		/* wait for the starting character or ^C */
+		for (;;) {
+			switch (serial_getc ()) {
+			case START_CHAR:	/* start packet */
+				goto START;
+			case ETX_CHAR:		/* ^C waiting for packet */
+				return (0);
+			default:
+				;
+			}
+		}
+START:
+		/* get length of packet */
+		sum = 0;
+		new_char = serial_getc ();
+		if ((new_char & 0xE0) == 0)
+			goto packet_error;
+		sum += new_char & 0xff;
+		length = untochar (new_char);
+		/* get sequence number */
+		new_char = serial_getc ();
+		if ((new_char & 0xE0) == 0)
+			goto packet_error;
+		sum += new_char & 0xff;
+		n = untochar (new_char);
+		--length;
+
+		/* NEW CODE - check sequence numbers for retried packets */
+		/* Note - this new code assumes that the sequence number is correctly
+		 * received.  Handling an invalid sequence number adds another layer
+		 * of complexity that may not be needed - yet!  At this time, I'm hoping
+		 * that I don't need to buffer the incoming data packets and can write
+		 * the data into memory in real time.
+		 */
+		if (n == last_n) {
+			/* same sequence number, restore the previous state */
+			k_state = k_state_saved;
+			k_data_restore ();
+		} else {
+			/* new sequence number, checkpoint the download */
+			last_n = n;
+			k_state_saved = k_state;
+			k_data_save ();
+		}
+		/* END NEW CODE */
+
+		/* get packet type */
+		new_char = serial_getc ();
+		if ((new_char & 0xE0) == 0)
+			goto packet_error;
+		sum += new_char & 0xff;
+		k_state = new_char;
+		--length;
+		/* check for extended length */
+		if (length == -2) {
+			/* (length byte was 0, decremented twice) */
+			/* get the two length bytes */
+			new_char = serial_getc ();
+			if ((new_char & 0xE0) == 0)
+				goto packet_error;
+			sum += new_char & 0xff;
+			len_hi = untochar (new_char);
+			new_char = serial_getc ();
+			if ((new_char & 0xE0) == 0)
+				goto packet_error;
+			sum += new_char & 0xff;
+			len_lo = untochar (new_char);
+			length = len_hi * 95 + len_lo;
+			/* check header checksum */
+			new_char = serial_getc ();
+			if ((new_char & 0xE0) == 0)
+				goto packet_error;
+			if (new_char != tochar ((sum + ((sum >> 6) & 0x03)) & 0x3f))
+				goto packet_error;
+			sum += new_char & 0xff;
+/* --length; */ /* new length includes only data and block check to come */
+		}
+		/* bring in rest of packet */
+		while (length > 1) {
+			new_char = serial_getc ();
+			if ((new_char & 0xE0) == 0)
+				goto packet_error;
+			sum += new_char & 0xff;
+			--length;
+			if (k_state == DATA_TYPE) {
+				/* pass on the data if this is a data packet */
+				k_data_char (new_char);
+			} else if (k_state == SEND_TYPE) {
+				/* save send pack in buffer as is */
+				*send_ptr++ = new_char;
+				/* if too much data, back off the pointer */
+				if (send_ptr >= &send_parms[SEND_DATA_SIZE])
+					--send_ptr;
+			}
+		}
+		/* get and validate checksum character */
+		new_char = serial_getc ();
+		if ((new_char & 0xE0) == 0)
+			goto packet_error;
+		if (new_char != tochar ((sum + ((sum >> 6) & 0x03)) & 0x3f))
+			goto packet_error;
+		/* get END_CHAR */
+		new_char = serial_getc ();
+		if (new_char != END_CHAR) {
+		  packet_error:
+			/* restore state machines */
+			k_state = k_state_saved;
+			k_data_restore ();
+			/* send a negative acknowledge packet in */
+			send_nack (n);
+		} else if (k_state == SEND_TYPE) {
+			/* crack the protocol parms, build an appropriate ack packet */
+			handle_send_packet (n);
+		} else {
+			/* send simple acknowledge packet in */
+			send_ack (n);
+			/* quit if end of transmission */
+			if (k_state == BREAK_TYPE)
+				done = 1;
+		}
+		++z;
+	}
+	return ((ulong) os_data_addr - (ulong) bin_start_address);
+}
+#endif	/* CFG_CMD_LOADB */
+
+/* -------------------------------------------------------------------- */
+
+#if (CONFIG_COMMANDS & CFG_CMD_LOADS)
+
+#ifdef	CFG_LOADS_BAUD_CHANGE
+cmd_tbl_t U_BOOT_CMD(LOADS) =  MK_CMD_ENTRY(
+	"loads", 3, 0,	do_load_serial,
+	"loads   - load S-Record file over serial line\n",
+	"[ off ] [ baud ]\n"
+	"    - load S-Record file over serial line"
+	" with offset 'off' and baudrate 'baud'\n"
+);
+
+#else	/* ! CFG_LOADS_BAUD_CHANGE */
+cmd_tbl_t U_BOOT_CMD(LOADS) =  MK_CMD_ENTRY(
+	"loads", 2, 0,	do_load_serial,
+	"loads   - load S-Record file over serial line\n",
+	"[ off ]\n"
+	"    - load S-Record file over serial line with offset 'off'\n"
+);
+#endif	/* CFG_LOADS_BAUD_CHANGE */
+
+/*
+ * SAVES always requires LOADS support, but not vice versa
+ */
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_SAVES)
+#ifdef	CFG_LOADS_BAUD_CHANGE
+cmd_tbl_t U_BOOT_CMD(SAVES) = MK_CMD_ENTRY(
+	"saves", 4, 0,	do_save_serial,
+	"saves   - save S-Record file over serial line\n",
+	"[ off ] [size] [ baud ]\n"
+	"    - save S-Record file over serial line"
+	" with offset 'off', size 'size' and baudrate 'baud'\n"
+);
+#else	/* ! CFG_LOADS_BAUD_CHANGE */
+cmd_tbl_t U_BOOT_CMD(SAVES) = MK_CMD_ENTRY(
+	"saves", 3, 0,	do_save_serial,
+	"saves   - save S-Record file over serial line\n",
+	"[ off ] [size]\n"
+	"    - save S-Record file over serial line with offset 'off' and size 'size'\n"
+);
+#endif	/* CFG_LOADS_BAUD_CHANGE */
+#endif	/* CFG_CMD_SAVES */
+#endif	/* CFG_CMD_LOADS */
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_LOADB)
+cmd_tbl_t U_BOOT_CMD(LOADB) = MK_CMD_ENTRY(
+	"loadb", 3, 0,	do_load_serial_bin,
+	"loadb   - load binary file over serial line (kermit mode)\n",
+	"[ off ] [ baud ]\n"
+	"    - load binary file over serial line"
+	" with offset 'off' and baudrate 'baud'\n"
+);
+
+#endif	/* CFG_CMD_LOADB */
+
+/* -------------------------------------------------------------------- */
+
+#if (CONFIG_COMMANDS & CFG_CMD_HWFLOW)
+int do_hwflow (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	extern int hwflow_onoff(int);
+
+	if (argc == 2) {
+		if (strcmp(argv[1], "off") == 0)
+			hwflow_onoff(-1);
+		else
+			if (strcmp(argv[1], "on") == 0)
+				hwflow_onoff(1);
+			else
+				printf("Usage: %s\n", cmdtp->usage);
+	}
+	printf("RTS/CTS hardware flow control: %s\n", hwflow_onoff(0) ? "on" : "off");
+	return 0;
+}
+
+/* -------------------------------------------------------------------- */
+
+cmd_tbl_t U_BOOT_CMD(HWFLOW) = MK_CMD_ENTRY(
+	"hwflow [on|off]", 2, 0,	do_hwflow,
+	"hwflow  - turn the harwdare flow control on/off\n",
+	"\n - change RTS/CTS hardware flow control over serial line\n"
+);
+
+#endif /* CFG_CMD_HWFLOW */