diff --git a/common/cmd_mdio.c b/common/cmd_mdio.c
new file mode 100644
index 0000000..cac0703
--- /dev/null
+++ b/common/cmd_mdio.c
@@ -0,0 +1,286 @@
+/*
+ * (C) Copyright 2011 Freescale Semiconductor, Inc
+ * Andy Fleming
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * MDIO Commands
+ */
+
+#include <common.h>
+#include <command.h>
+#include <miiphy.h>
+#include <phy.h>
+
+
+static char last_op[2];
+static uint last_data;
+static uint last_addr_lo;
+static uint last_addr_hi;
+static uint last_devad_lo;
+static uint last_devad_hi;
+static uint last_reg_lo;
+static uint last_reg_hi;
+
+static int extract_range(char *input, int *plo, int *phi)
+{
+	char *end;
+	*plo = simple_strtol(input, &end, 0);
+	if (end == input)
+		return -1;
+
+	if ((*end == '-') && *(++end))
+		*phi = simple_strtol(end, NULL, 0);
+	else if (*end == '\0')
+		*phi = *plo;
+	else
+		return -1;
+
+	return 0;
+}
+
+int mdio_write_ranges(struct mii_dev *bus, int addrlo,
+			int addrhi, int devadlo, int devadhi,
+			int reglo, int reghi, unsigned short data)
+{
+	int addr, devad, reg;
+	int err = 0;
+
+	for (addr = addrlo; addr <= addrhi; addr++) {
+		for (devad = devadlo; devad <= devadhi; devad++) {
+			for (reg = reglo; reg <= reghi; reg++) {
+				err = bus->write(bus, addr, devad, reg, data);
+
+				if (err)
+					goto err_out;
+			}
+		}
+	}
+
+err_out:
+	return err;
+}
+
+int mdio_read_ranges(struct mii_dev *bus, int addrlo,
+			int addrhi, int devadlo, int devadhi,
+			int reglo, int reghi)
+{
+	int addr, devad, reg;
+
+	printf("Reading from bus %s\n", bus->name);
+	for (addr = addrlo; addr <= addrhi; addr++) {
+		printf("PHY at address %d:\n", addr);
+
+		for (devad = devadlo; devad <= devadhi; devad++) {
+			for (reg = reglo; reg <= reghi; reg++) {
+				u16 val;
+				val = bus->read(bus, addr, devad, reg);
+
+				if (val < 0) {
+					printf("Error\n");
+
+					return val;
+				}
+
+				if (devad >= 0)
+					printf("%d.", devad);
+
+				printf("%d - 0x%x\n", reg, val & 0xffff);
+			}
+		}
+	}
+
+	return 0;
+}
+
+/* The register will be in the form [a[-b].]x[-y] */
+int extract_reg_range(char *input, int *devadlo, int *devadhi,
+		int *reglo, int *reghi)
+{
+	char *regstr;
+
+	/* use strrchr to find the last string after a '.' */
+	regstr = strrchr(input, '.');
+
+	/* If it exists, extract the devad(s) */
+	if (regstr) {
+		char devadstr[32];
+
+		strncpy(devadstr, input, regstr - input);
+		devadstr[regstr - input] = '\0';
+
+		if (extract_range(devadstr, devadlo, devadhi))
+			return -1;
+
+		regstr++;
+	} else {
+		/* Otherwise, we have no devad, and we just got regs */
+		*devadlo = *devadhi = MDIO_DEVAD_NONE;
+
+		regstr = input;
+	}
+
+	return extract_range(regstr, reglo, reghi);
+}
+
+int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus,
+		int *addrlo, int *addrhi)
+{
+	struct phy_device *phydev;
+
+	if ((argc < 1) || (argc > 2))
+		return -1;
+
+	/* If there are two arguments, it's busname addr */
+	if (argc == 2) {
+		*bus = miiphy_get_dev_by_name(argv[0]);
+
+		if (!*bus)
+			return -1;
+
+		return extract_range(argv[1], addrlo, addrhi);
+	}
+
+	/* It must be one argument, here */
+
+	/*
+	 * This argument can be one of two things:
+	 * 1) Ethernet device name
+	 * 2) Just an address (use the previously-used bus)
+	 *
+	 * We check all buses for a PHY which is connected to an ethernet
+	 * device by the given name.  If none are found, we call
+	 * extract_range() on the string, and see if it's an address range.
+	 */
+	phydev = mdio_phydev_for_ethname(argv[0]);
+
+	if (phydev) {
+		*addrlo = *addrhi = phydev->addr;
+		*bus = phydev->bus;
+
+		return 0;
+	}
+
+	/* It's an address or nothing useful */
+	return extract_range(argv[0], addrlo, addrhi);
+}
+
+/* ---------------------------------------------------------------- */
+static int do_mdio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	char op[2];
+	int addrlo, addrhi, reglo, reghi, devadlo, devadhi;
+	unsigned short	data;
+	int pos = argc - 1;
+	struct mii_dev *bus;
+
+	if (argc < 2)
+		return cmd_usage(cmdtp);
+
+	/*
+	 * We use the last specified parameters, unless new ones are
+	 * entered.
+	 */
+	op[0] = argv[1][0];
+	addrlo = last_addr_lo;
+	addrhi = last_addr_hi;
+	devadlo = last_devad_lo;
+	devadhi = last_devad_hi;
+	reglo  = last_reg_lo;
+	reghi  = last_reg_hi;
+	data   = last_data;
+
+	bus = mdio_get_current_dev();
+
+	if (flag & CMD_FLAG_REPEAT)
+		op[0] = last_op[0];
+
+	switch (op[0]) {
+	case 'w':
+		if (pos > 1)
+			data = simple_strtoul(argv[pos--], NULL, 16);
+	case 'r':
+		if (pos > 1)
+			if (extract_reg_range(argv[pos--], &devadlo, &devadhi,
+					&reglo, &reghi))
+				return -1;
+
+	default:
+		if (pos > 1)
+			if (extract_phy_range(&(argv[2]), pos - 1, &bus,
+					&addrlo, &addrhi))
+				return -1;
+
+		break;
+	}
+
+	if (op[0] == 'l') {
+		mdio_list_devices();
+
+		return 0;
+	}
+
+	/* Save the chosen bus */
+	miiphy_set_current_dev(bus->name);
+
+	switch (op[0]) {
+	case 'w':
+		mdio_write_ranges(bus, addrlo, addrhi, devadlo, devadhi,
+				reglo, reghi, data);
+		break;
+
+	case 'r':
+		mdio_read_ranges(bus, addrlo, addrhi, devadlo, devadhi,
+				reglo, reghi);
+		break;
+	}
+
+	/*
+	 * Save the parameters for repeats.
+	 */
+	last_op[0] = op[0];
+	last_addr_lo = addrlo;
+	last_addr_hi = addrhi;
+	last_devad_lo = devadlo;
+	last_devad_hi = devadhi;
+	last_reg_lo  = reglo;
+	last_reg_hi  = reghi;
+	last_data    = data;
+
+	return 0;
+}
+
+/***************************************************/
+
+U_BOOT_CMD(
+	mdio,	6,	1,	do_mdio,
+	"MDIO utility commands",
+	"list			- List MDIO buses\n"
+	"mdio read <phydev> [<devad>.]<reg> - "
+		"read PHY's register at <devad>.<reg>\n"
+	"mdio write <phydev> [<devad>.]<reg> <data> - "
+		"write PHY's register at <devad>.<reg>\n"
+	"<phydev> may be:\n"
+	"   <busname>  <addr>\n"
+	"   <addr>\n"
+	"   <eth name>\n"
+	"<addr> <devad>, and <reg> may be ranges, e.g. 1-5.4-0x1f.\n"
+);