diff --git a/CHANGELOG b/CHANGELOG
index 326732d..fc3d4a7 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,123 @@
+commit 5f6c732affea9647762d27a4617a2ae64c52dceb
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed Apr 18 16:17:46 2007 +0200
+
+    Update CHANGELOG
+
+commit ad4eb555671d97f96dc56eab55103b1f86874b01
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed Apr 18 14:30:39 2007 +0200
+
+    MCC200 board: remove warning which is obsolete after PSoC firmware changes
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3747a3f010b2b1442dec3e871c69788b6017aaae
+Author: Domen Puncer <domen.puncer@telargo.com>
+Date:	Wed Apr 18 12:11:05 2007 +0200
+
+    [PATCH] icecube/lite5200b: document wakeup from low-power support
+
+    Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
+
+commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed Apr 18 12:07:47 2007 +0200
+
+    ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed Apr 18 12:05:59 2007 +0200
+
+    ppc4xx: Add output for bootrom location to 405EZ ports
+
+    Now 405EZ ports also show upon bootup from which boot device
+    they are configured to boot:
+
+    U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
+
+    CPU:   AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
+	   Bootstrap Option E - Boot ROM Location EBC (32 bits)
+	   16 kB I-Cache 16 kB D-Cache
+    Board: Acadia - AMCC PPC405EZ Evaluation Board
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
+Author: Domen Puncer <domen.puncer@telargo.com>
+Date:	Mon Apr 16 14:00:13 2007 +0200
+
+    [PATCH] icecube/lite5200b: wakeup from low-power support
+
+    U-Boot part of Lite5200b low power mode support.
+    Puts SDRAM out of self-refresh and transfers control to
+    address saved at physical 0x0.
+
+    Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
+    Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 8048cdd56f04a756eeea4951f402bf5cc33785db
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sat Apr 14 21:16:54 2007 +0200
+
+    Update CHANGELOG
+
+commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date:	Sat Apr 14 05:26:48 2007 +0200
+
+    [Fix]	Set the LED status register on the UC101 for the LXT971 PHY.
+	    clear the Display after reset.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
+Author: Denis Peter <d.peter@mpl.ch>
+Date:	Fri Apr 13 09:13:33 2007 +0200
+
+    [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
+
+    Fix bug introduced by "Fix get_partition_info() parameter error in all
+    other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
+    to use diskboot or scsiboot form another device than 0.
+
+    Signed-off-by: Denis Peter <d.peter@mpl.ch>
+
+commit 0b94504d22e70f537c17a0d38c87edb6e370977d
+Author: Greg Lopp <lopp@pobox.com>
+Date:	Fri Apr 13 08:02:24 2007 +0200
+
+    [PATCH] Fix use of "void *" for block dev read/write buffer pointers
+
+    Signed-of-by: Greg Lopp <lopp@pobox.com>
+    Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date:	Thu Apr 12 14:15:59 2007 +0200
+
+    ppc4xx: Fix i2c divisor calcularion for PPC4xx
+
+    This patch fixes changes the i2c_init(...) function to use the function
+    get_OPB_freq() rather than calculating the OPB speed by
+    sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
+    specific per processor. The prior method was not and so was calculating
+    the wrong speed for some PPC4xx processors.
+
+    Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed Apr 11 17:25:01 2007 +0200
+
+    Update CHANGELOG
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
 Author: Wolfgang Denk <wd@denx.de>
 Date:	Wed Apr 11 17:22:55 2007 +0200
@@ -8,6 +128,54 @@
     * Use Newline as "password" string
     * Use just a single partition in NAND flash
 
+commit c0707ce65677650b5ceab0500ee50ae5168afef2
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date:	Thu Apr 5 18:34:06 2007 +0800
+
+    [Blackfin][PATCH] Kill off a bunch of common local prototypes
+
+commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date:	Thu Apr 5 18:33:04 2007 +0800
+
+    [Blackfin][PATCH] Fix dynamic CPLB generation issue
+
+commit 0445e3a264251d75b1be45ef713c70726a2952f0
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date:	Thu Apr 5 18:31:47 2007 +0800
+
+    [Blackfin][PATCH] minior cleanup
+
+commit 155fd766573981090e638b493d5857562151862e
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date:	Thu Apr 5 18:31:18 2007 +0800
+
+    [Blackfin][PATCH] Fix copyright and update license
+
+commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date:	Thu Apr 5 18:30:25 2007 +0800
+
+    [Blackfin][PATCH] Add BF537 EMAC driver initialization
+
+commit 889256e8604e0c68db1d866d720894dffede9df6
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date:	Thu Apr 5 18:29:55 2007 +0800
+
+    [Blackfin][PATCH] call real the system synchronize instruction
+
+commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date:	Thu Apr 5 18:29:17 2007 +0800
+
+    [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
+
+commit dfeeab2cd680df047e68e723b246adf6f33bb556
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date:	Thu Apr 5 18:28:34 2007 +0800
+
+    [Blackfin][PATCH]: fix flash unaligned copy issue
+
 commit 31c98a88228021b314c89ebb8104fb6473da4471
 Author: Wolfgang Denk <wd@denx.de>
 Date:	Wed Apr 4 02:09:30 2007 +0200
@@ -20,6 +188,18 @@
 
     Minor cleanup.
 
+commit a65c5768e5537530bd1780af3d3fddc3113a163c
+Author: Stefan Roese <sr@denx.de>
+Date:	Mon Apr 2 10:09:30 2007 +0200
+
+    ppc4xx: Change SysACE address on Katmai
+
+    With this new base address of the Xilinx SystemACE controller
+    the Linux driver will be easier to adapt, since it can now be
+    mapped via the "normal" ioremap() call.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
 Author: Gerald Van Baren <vanbaren@cideas.com>
 Date:	Sat Mar 31 14:30:53 2007 -0400
diff --git a/Makefile b/Makefile
index a668d45..e45c917 100644
--- a/Makefile
+++ b/Makefile
@@ -430,6 +430,7 @@
 	@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
 
 lite5200b_config	\
+lite5200b_PM_config	\
 lite5200b_LOWBOOT_config:	unconfig
 	@mkdir -p $(obj)include
 	@mkdir -p $(obj)board/icecube
@@ -438,6 +439,10 @@
 	@ echo "... DDR memory revision"
 	@ echo "#define CONFIG_MPC5200"		>>$(obj)include/config.h
 	@ echo "#define CONFIG_LITE5200B"	>>$(obj)include/config.h
+	@[ -z "$(findstring _PM_,$@)" ] || \
+		{ echo "#define CONFIG_LITE5200B_PM"	>>$(obj)include/config.h ; \
+		  echo "... with power management (low-power mode) support" ; \
+		}
 	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
 		{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 		  echo "... with LOWBOOT configuration" ; \
diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c
index 7d0046a..baf598c 100644
--- a/board/amcc/acadia/acadia.c
+++ b/board/amcc/acadia/acadia.c
@@ -26,7 +26,7 @@
 
 extern void board_pll_init_f(void);
 
-void liveoak_gpio_init(void)
+static void acadia_gpio_init(void)
 {
 	/*
 	 * GPIO0 setup (select GPIO or alternate function)
@@ -55,8 +55,12 @@
 {
 	unsigned int reg;
 
-	board_pll_init_f();
-	liveoak_gpio_init();
+	/* don't reinit PLL when booting via I2C bootstrap option */
+	mfsdr(SDR_PINSTP, reg);
+	if (reg != 0xf0000000)
+		board_pll_init_f();
+
+	acadia_gpio_init();
 
 	/* USB Host core needs this bit set */
 	mfsdr(sdrultra1, reg);
diff --git a/board/amcc/katmai/init.S b/board/amcc/katmai/init.S
index 6b024ee..5202ae6 100644
--- a/board/amcc/katmai/init.S
+++ b/board/amcc/katmai/init.S
@@ -103,7 +103,7 @@
 
 	tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
 
-	tlbentry(CFG_ACE_BASE, SZ_1K, 0xE0000000, 4,AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_ACE_BASE, SZ_1K, CFG_ACE_BASE, 4,AC_R|AC_W|SA_G|SA_I)
 
 	tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
 	tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
diff --git a/board/bf533-ezkit/Makefile b/board/bf533-ezkit/Makefile
index 4fe7d78..e55c1a7 100644
--- a/board/bf533-ezkit/Makefile
+++ b/board/bf533-ezkit/Makefile
@@ -1,7 +1,7 @@
 #
 # U-boot - Makefile
 #
-# Copyright (c) 2007 Analog Device Inc.
+# Copyright (c) 2005-2007 Analog Device Inc.
 #
 # (C) Copyright 2000-2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
diff --git a/board/bf533-ezkit/bf533-ezkit.c b/board/bf533-ezkit/bf533-ezkit.c
index feaeb00..1dd4a3f 100644
--- a/board/bf533-ezkit/bf533-ezkit.c
+++ b/board/bf533-ezkit/bf533-ezkit.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - ezkit533.c
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
diff --git a/board/bf533-ezkit/flash-defines.h b/board/bf533-ezkit/flash-defines.h
index e211918..bd9e859 100644
--- a/board/bf533-ezkit/flash-defines.h
+++ b/board/bf533-ezkit/flash-defines.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - flash-defines.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef __FLASHDEFINES_H__
@@ -60,7 +60,7 @@
 int erase_flash(void);
 int erase_block_flash(int, unsigned long);
 void unlock_flash(long lOffset);
-int write_data(long lStart, long lCount, long lStride, int *pnData);
+int write_data(long lStart, long lCount, uchar *pnData);
 int FillData(long lStart, long lCount, long lStride, int *pnData);
 int read_data(long lStart, long lCount, long lStride, int *pnData);
 int read_flash(long nOffset, int *pnValue);
diff --git a/board/bf533-ezkit/flash.c b/board/bf533-ezkit/flash.c
index 067a260..299cdba 100644
--- a/board/bf533-ezkit/flash.c
+++ b/board/bf533-ezkit/flash.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - flash.c Flash driver for PSD4256GV
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  * This file is based on BF533EzFlash.c originally written by Analog Devices, Inc.
  *
  * (C) Copyright 2000-2004
@@ -22,8 +22,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <asm/io.h>
@@ -178,63 +178,66 @@
 int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 {
 	int ret;
-
-	ret = write_data(addr, cnt, 1, (int *)src);
+	int d;
+	if (addr % 2) {
+		read_flash(addr - 1 - CFG_FLASH_BASE, &d);
+		d = (int)((d & 0x00FF) | (*src++ << 8));
+		ret = write_data(addr - 1, 2, (uchar *) & d);
+		if (ret == FLASH_FAIL)
+			return ERR_NOT_ERASED;
+		ret = write_data(addr + 1, cnt - 1, src);
+	} else
+		ret = write_data(addr, cnt, src);
 	if (ret == FLASH_FAIL)
 		return ERR_NOT_ERASED;
 	return FLASH_SUCCESS;
 }
 
-int write_data(long lStart, long lCount, long lStride, int *pnData)
+int write_data(long lStart, long lCount, uchar * pnData)
 {
 	long i = 0;
-	int j = 0;
 	unsigned long ulOffset = lStart - CFG_FLASH_BASE;
 	int d;
-	int iShift = 0;
-	int iNumWords = 2;
-	int nLeftover = lCount % 4;
 	int nSector = 0;
+	int flag = 0;
 
-	for (i = 0; (i < lCount / 4) && (i < BUFFER_SIZE); i++) {
-		for (iShift = 0, j = 0; (j < iNumWords);
-		     j++, ulOffset += (lStride * 2)) {
-			if ((ulOffset >= INVALIDLOCNSTART)
-			    && (ulOffset < INVALIDLOCNEND)) {
-				printf
-				    ("Invalid locations, Try writing to another location \n");
-				return FLASH_FAIL;
-			}
-			get_sector_number(ulOffset, &nSector);
-			read_flash(ulOffset, &d);
-			if (d != 0xffff) {
-				printf
-				    ("Flash not erased at offset 0x%x Please erase to reprogram \n",
-				     ulOffset);
-				return FLASH_FAIL;
-			}
-			unlock_flash(ulOffset);
-			if (write_flash(ulOffset, (pnData[i] >> iShift)) < 0) {
-				printf("Error programming the flash \n");
-				return FLASH_FAIL;
-			}
-			iShift += 16;
-		}
+	if (lCount % 2) {
+		flag = 1;
+		lCount = lCount - 1;
 	}
-	if (nLeftover > 0) {
-		if ((ulOffset >= INVALIDLOCNSTART)
-		    && (ulOffset < INVALIDLOCNEND))
-			return FLASH_FAIL;
+
+	for (i = 0; i < lCount - 1; i += 2, ulOffset += 2) {
 		get_sector_number(ulOffset, &nSector);
 		read_flash(ulOffset, &d);
 		if (d != 0xffff) {
 			printf
-			    ("Flash already programmed. Please erase to reprogram \n");
-			printf("uloffset = 0x%x \t d = 0x%x\n", ulOffset, d);
+			    ("Flash not erased at offset 0x%x Please erase to reprogram \n",
+			     ulOffset);
 			return FLASH_FAIL;
 		}
 		unlock_flash(ulOffset);
-		if (write_flash(ulOffset, pnData[i]) < 0) {
+		d = (int)(pnData[i] | pnData[i + 1] << 8);
+		write_flash(ulOffset, d);
+		if (poll_toggle_bit(ulOffset) < 0) {
+			printf("Error programming the flash \n");
+			return FLASH_FAIL;
+		}
+		if ((i > 0) && (!(i % AFP_SectorSize2)))
+			printf(".");
+	}
+	if (flag) {
+		get_sector_number(ulOffset, &nSector);
+		read_flash(ulOffset, &d);
+		if (d != 0xffff) {
+			printf
+			    ("Flash not erased at offset 0x%x Please erase to reprogram \n",
+			     ulOffset);
+			return FLASH_FAIL;
+		}
+		unlock_flash(ulOffset);
+		d = (int)(pnData[i] | (d & 0xFF00));
+		write_flash(ulOffset, d);
+		if (poll_toggle_bit(ulOffset) < 0) {
 			printf("Error programming the flash \n");
 			return FLASH_FAIL;
 		}
diff --git a/board/bf533-ezkit/psd4256.h b/board/bf533-ezkit/psd4256.h
index 9776516..cc654b8 100644
--- a/board/bf533-ezkit/psd4256.h
+++ b/board/bf533-ezkit/psd4256.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - psd4256.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 /*
diff --git a/board/bf533-stamp/Makefile b/board/bf533-stamp/Makefile
index 8223d59..02c941b 100644
--- a/board/bf533-stamp/Makefile
+++ b/board/bf533-stamp/Makefile
@@ -1,7 +1,7 @@
 #
 # U-boot - Makefile
 #
-# Copyright (c) 2007 Analog Device Inc.
+# Copyright (c) 2005-2007 Analog Device Inc.
 #
 # (C) Copyright 2000-2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c
index 2f6e751..b9dff99 100644
--- a/board/bf533-stamp/bf533-stamp.c
+++ b/board/bf533-stamp/bf533-stamp.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - stamp.c STAMP board specific routines
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
diff --git a/board/bf533-stamp/bf533-stamp.h b/board/bf533-stamp/bf533-stamp.h
index b2b51aa..1e58e47 100644
--- a/board/bf533-stamp/bf533-stamp.h
+++ b/board/bf533-stamp/bf533-stamp.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - stamp.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef __STAMP_H__
diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c
index cc4e998..47f7c9e 100644
--- a/board/bf537-stamp/bf537-stamp.c
+++ b/board/bf537-stamp/bf537-stamp.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - BF537.c
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
diff --git a/board/bf537-stamp/flash-defines.h b/board/bf537-stamp/flash-defines.h
index f19e171..acc1e86 100644
--- a/board/bf537-stamp/flash-defines.h
+++ b/board/bf537-stamp/flash-defines.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - flash-defines.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef __FLASHDEFINES_H__
diff --git a/board/bf537-stamp/flash.c b/board/bf537-stamp/flash.c
index 42dcf06..ed85841 100644
--- a/board/bf537-stamp/flash.c
+++ b/board/bf537-stamp/flash.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - flash.c Flash driver for PSD4256GV
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  * This file is based on BF533EzFlash.c originally written by Analog Devices, Inc.
  *
  * (C) Copyright 2000-2004
@@ -22,8 +22,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <malloc.h>
diff --git a/board/bf561-ezkit/bf561-ezkit.c b/board/bf561-ezkit/bf561-ezkit.c
index 71281c0..989b019 100644
--- a/board/bf561-ezkit/bf561-ezkit.c
+++ b/board/bf561-ezkit/bf561-ezkit.c
@@ -2,7 +2,7 @@
  * U-boot - ezkit561.c
  *
  * Copyright (c) 2005 Bas Vermeulen <bas@buyways.nl>
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -22,8 +22,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
index 700c9d9..2960998 100644
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -42,6 +42,53 @@
 #include "mt48lc16m16a2-75.h"
 # endif
 #endif
+
+#ifdef CONFIG_LITE5200B_PM
+/* u-boot part of low-power mode implementation */
+#define SAVED_ADDR (*(void **)0x00000000)
+#define PSC2_4 0x02
+
+void lite5200b_wakeup(void)
+{
+	unsigned char wakeup_pin;
+	void (*linux_wakeup)(void);
+
+	/* check PSC2_4, if it's down "QT" is signaling we have a wakeup
+	 * from low power mode */
+	*(vu_char *)MPC5XXX_WU_GPIO_ENABLE = PSC2_4;
+	__asm__ volatile ("sync");
+
+	wakeup_pin = *(vu_char *)MPC5XXX_WU_GPIO_DATA_I;
+	if (wakeup_pin & PSC2_4)
+		return;
+
+	/* acknowledge to "QT"
+	 * by holding pin at 1 for 10 uS */
+	*(vu_char *)MPC5XXX_WU_GPIO_DIR = PSC2_4;
+	__asm__ volatile ("sync");
+	*(vu_char *)MPC5XXX_WU_GPIO_DATA_O = PSC2_4;
+	__asm__ volatile ("sync");
+	udelay(10);
+
+	/* put ram out of self-refresh */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL |= 0x80000000;	/* mode_en */
+	__asm__ volatile ("sync");
+	*(vu_long *)MPC5XXX_SDRAM_CTRL |= 0x50000000;	/* cke ref_en */
+	__asm__ volatile ("sync");
+	*(vu_long *)MPC5XXX_SDRAM_CTRL &= ~0x80000000;	/* !mode_en */
+	__asm__ volatile ("sync");
+	udelay(10); /* wait a bit */
+
+	/* jump back to linux kernel code */
+	linux_wakeup = SAVED_ADDR;
+	printf("\n\nLooks like we just woke, transferring control to 0x%08lx\n",
+			linux_wakeup);
+	linux_wakeup();
+}
+#else
+#define lite5200b_wakeup()
+#endif
+
 #ifndef CFG_RAMBOOT
 static void sdram_start (int hi_addr)
 {
@@ -208,6 +255,8 @@
 		__asm__ volatile ("sync");
 	}
 
+	lite5200b_wakeup();
+
 	return dramsize + dramsize2;
 }
 
diff --git a/board/mcc200/lcd.c b/board/mcc200/lcd.c
index 98b86d1..726366d 100644
--- a/board/mcc200/lcd.c
+++ b/board/mcc200/lcd.c
@@ -180,10 +180,6 @@
 			break;
 		udelay (PSOC_WAIT_TIME);
 	}
-	if (!retries) {
-		printf ("%s Warning: PSoC doesn't respond on "
-			"RTS NEGATE\n",	__FUNCTION__);
-	}
 
 	return;
 }
diff --git a/board/uc101/uc101.c b/board/uc101/uc101.c
index 7a6b3be..f726513 100644
--- a/board/uc101/uc101.c
+++ b/board/uc101/uc101.c
@@ -221,6 +221,8 @@
 int checkboard (void)
 {
 	puts ("Board: MAN UC101\n");
+	/* clear the Display */
+	*(char *)(CFG_DISP_CWORD) = 0x80;
 	return 0;
 }
 
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index b4119f3..ce99a41 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -423,7 +423,7 @@
 		}
 		part = simple_strtoul(++ep, NULL, 16);
 	}
-	if (get_partition_info (ide_dev_desc, part, &info)) {
+	if (get_partition_info (&ide_dev_desc[dev], part, &info)) {
 		SHOW_BOOT_PROGRESS (-1);
 		return 1;
 	}
@@ -1344,7 +1344,7 @@
 
 		++n;
 		++blknr;
-		buffer += ATA_SECTORWORDS;
+		buffer += ATA_BLOCKSIZE;
 	}
 IDE_READ_E:
 	ide_led (DEVICE_LED(device), 0);	/* LED off	*/
@@ -1428,7 +1428,7 @@
 		c = ide_inb (device, ATA_STATUS);	/* clear IRQ */
 		++n;
 		++blknr;
-		buffer += ATA_SECTORWORDS;
+		buffer += ATA_BLOCKSIZE;
 	}
 WR_OUT:
 	ide_led (DEVICE_LED(device), 0);	/* LED off	*/
@@ -2052,7 +2052,7 @@
 		n+=cnt;
 		blkcnt-=cnt;
 		blknr+=cnt;
-		buffer+=cnt*(ATAPI_READ_BLOCK_SIZE/4); /* ulong blocksize in ulong */
+		buffer+=(cnt*ATAPI_READ_BLOCK_SIZE);
 	} while (blkcnt > 0);
 	return (n);
 }
diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c
index da36ed9..00b84fa 100644
--- a/common/cmd_scsi.c
+++ b/common/cmd_scsi.c
@@ -248,7 +248,7 @@
 		}
 		part = simple_strtoul(++ep, NULL, 16);
 	}
-	if (get_partition_info (scsi_dev_desc, part, &info)) {
+	if (get_partition_info (&scsi_dev_desc[dev], part, &info)) {
 		printf("error reading partinfo\n");
 		return 1;
 	}
diff --git a/cpu/at32ap/atmel_mci.c b/cpu/at32ap/atmel_mci.c
index 3e3789b..9f62c0f 100644
--- a/cpu/at32ap/atmel_mci.c
+++ b/cpu/at32ap/atmel_mci.c
@@ -221,7 +221,7 @@
 
 			if (status & MMCI_BIT(RXRDY)) {
 				data = mmci_readl(RDR);
-				// pr_debug("%x\n", data);
+				/* pr_debug("%x\n", data); */
 				*buffer++ = data;
 				wordcount++;
 			}
diff --git a/cpu/bf533/Makefile b/cpu/bf533/Makefile
index 90018f3..dd4f299 100644
--- a/cpu/bf533/Makefile
+++ b/cpu/bf533/Makefile
@@ -1,6 +1,6 @@
 # U-boot - Makefile
 #
-# Copyright (c) 2005 blackfin.uclinux.org
+# Copyright (c) 2005-2007 Analog Devices Inc.
 #
 # (C) Copyright 2000-2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -20,8 +20,8 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+# MA 02110-1301 USA
 #
 
 include $(TOPDIR)/config.mk
diff --git a/cpu/bf533/bf533_serial.h b/cpu/bf533/bf533_serial.h
index 0a04f3e..25b96a9 100644
--- a/cpu/bf533/bf533_serial.h
+++ b/cpu/bf533/bf533_serial.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - bf533_serial.h Serial Driver defines
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on
  * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver.
@@ -38,8 +38,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _Bf533_SERIAL_H
diff --git a/cpu/bf533/config.mk b/cpu/bf533/config.mk
index 10817d9..6a713c3 100644
--- a/cpu/bf533/config.mk
+++ b/cpu/bf533/config.mk
@@ -1,6 +1,6 @@
 # U-boot - config.mk
 #
-# Copyright (c) 2005 blackfin.uclinux.org
+# Copyright (c) 2005-2007 Analog Devices Inc.
 #
 # (C) Copyright 2000-2004
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -20,8 +20,8 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+# MA 02110-1301 USA
 #
 
 PLATFORM_RELFLAGS += -mcpu=bf533 -ffixed-P5
diff --git a/cpu/bf533/cpu.c b/cpu/bf533/cpu.c
index ac8ec51..8118861 100644
--- a/cpu/bf533/cpu.c
+++ b/cpu/bf533/cpu.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - cpu.c CPU specific functions
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
@@ -93,7 +93,7 @@
 
 	/* Fill the rest with invalid entry */
 	if (j <= 15) {
-		for (; j <= 16; j++) {
+		for (; j < 16; j++) {
 			debug("filling %i with 0", j);
 			*I1++ = 0x0;
 		}
@@ -169,7 +169,7 @@
 
 	/* Fill the rest with invalid entry */
 	if (j <= 15) {
-		for (; j <= 16; j++) {
+		for (; j < 16; j++) {
 			debug("filling %i with 0", j);
 			*I1++ = 0x0;
 		}
diff --git a/cpu/bf533/cpu.h b/cpu/bf533/cpu.h
index 821363e..b6b73b1 100644
--- a/cpu/bf533/cpu.h
+++ b/cpu/bf533/cpu.h
@@ -1,7 +1,7 @@
 /*
  *  U-boot - cpu.h
  *
- *  Copyright (c) 2005 blackfin.uclinux.org
+ *  Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _CPU_H_
diff --git a/cpu/bf533/flush.S b/cpu/bf533/flush.S
index 0512f3b..62e3d65 100644
--- a/cpu/bf533/flush.S
+++ b/cpu/bf533/flush.S
@@ -1,9 +1,9 @@
-/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved.
- * Copyright (C) 2004 LG SOft India. All Rights Reserved.
+/* Copyright (C) 2003-2007 Analog Devices Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.
  */
+
 #define ASSEMBLY
 
 #include <asm/linkage.h>
diff --git a/cpu/bf533/interrupt.S b/cpu/bf533/interrupt.S
index 524da8f..c356d53 100644
--- a/cpu/bf533/interrupt.S
+++ b/cpu/bf533/interrupt.S
@@ -1,7 +1,7 @@
 /*
  * U-boot - interrupt.S Processing of interrupts and exception handling
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -35,8 +35,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #define ASSEMBLY
diff --git a/cpu/bf533/interrupts.c b/cpu/bf533/interrupts.c
index 9317f26..14d06cf 100644
--- a/cpu/bf533/interrupts.c
+++ b/cpu/bf533/interrupts.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - interrupts.c Interrupt related routines
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on interrupts.c
  * Copyright 1996 Roman Zippel
@@ -30,8 +30,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
diff --git a/cpu/bf533/ints.c b/cpu/bf533/ints.c
index f476f14..5586689 100644
--- a/cpu/bf533/ints.c
+++ b/cpu/bf533/ints.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - ints.c Interrupt related routines
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on ints.c
  *
@@ -32,8 +32,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
diff --git a/cpu/bf533/serial.c b/cpu/bf533/serial.c
index 11a46be..6cab5da 100644
--- a/cpu/bf533/serial.c
+++ b/cpu/bf533/serial.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - serial.c Serial driver for BF533
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on
  * bf533_serial.c: Serial driver for BlackFin BF533 DSP internal UART.
@@ -38,8 +38,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
diff --git a/cpu/bf533/start.S b/cpu/bf533/start.S
index 94556d6..67a60cf 100644
--- a/cpu/bf533/start.S
+++ b/cpu/bf533/start.S
@@ -1,7 +1,7 @@
 /*
  * U-boot - start.S Startup file of u-boot for BF533/BF561
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on head.S
  * Copyright (c) 2003  Metrowerks/Motorola
@@ -26,8 +26,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 /*
diff --git a/cpu/bf533/start1.S b/cpu/bf533/start1.S
index 72cfafb..6d4731b 100644
--- a/cpu/bf533/start1.S
+++ b/cpu/bf533/start1.S
@@ -1,7 +1,7 @@
 /*
  * U-boot - start1.S Code running out of RAM after relocation
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #define ASSEMBLY
diff --git a/cpu/bf533/traps.c b/cpu/bf533/traps.c
index 248e34f..19b1fde 100644
--- a/cpu/bf533/traps.c
+++ b/cpu/bf533/traps.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - traps.c Routines related to interrupts and exceptions
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on
  * No original Copyright holder listed,
@@ -29,8 +29,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
@@ -39,7 +39,6 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/traps.h>
-#include <asm/page.h>
 #include <asm/machdep.h>
 #include "cpu.h"
 #include <asm/arch/anomaly.h>
diff --git a/cpu/bf537/Makefile b/cpu/bf537/Makefile
index 61c7338..8b0f9c0 100644
--- a/cpu/bf537/Makefile
+++ b/cpu/bf537/Makefile
@@ -1,6 +1,6 @@
 # U-boot - Makefile
 #
-# Copyright (c) 2005 blackfin.uclinux.org
+# Copyright (c) 2005-2007 Analog Devices Inc.
 #
 # (C) Copyright 2000-2004
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -20,8 +20,8 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+# MA 02110-1301 USA
 #
 
 include $(TOPDIR)/config.mk
diff --git a/cpu/bf537/config.mk b/cpu/bf537/config.mk
index 4d57d9c..8a35789 100644
--- a/cpu/bf537/config.mk
+++ b/cpu/bf537/config.mk
@@ -1,6 +1,6 @@
 # U-boot - config.mk
 #
-# Copyright (c) 2005 blackfin.uclinux.org
+# Copyright (c) 2005-2007 Analog Devices Inc.
 #
 # (C) Copyright 2000-2004
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -20,8 +20,8 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+# MA 02110-1301 USA
 #
 
 PLATFORM_RELFLAGS += -mcpu=bf537 -ffixed-P5
diff --git a/cpu/bf537/cpu.c b/cpu/bf537/cpu.c
index cb8dc3c..62f603b 100644
--- a/cpu/bf537/cpu.c
+++ b/cpu/bf537/cpu.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - cpu.c CPU specific functions
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
diff --git a/cpu/bf537/cpu.h b/cpu/bf537/cpu.h
index 821363e..b6b73b1 100644
--- a/cpu/bf537/cpu.h
+++ b/cpu/bf537/cpu.h
@@ -1,7 +1,7 @@
 /*
  *  U-boot - cpu.h
  *
- *  Copyright (c) 2005 blackfin.uclinux.org
+ *  Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _CPU_H_
diff --git a/cpu/bf537/flush.S b/cpu/bf537/flush.S
index c260a8f..fbd26cc 100644
--- a/cpu/bf537/flush.S
+++ b/cpu/bf537/flush.S
@@ -1,9 +1,9 @@
-/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved.
- * Copyright (C) 2004 LG SOft India. All Rights Reserved.
+/* Copyright (C) 2003-2007 Analog Devices Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.
  */
+
 #define ASSEMBLY
 
 #include <asm/linkage.h>
diff --git a/cpu/bf537/interrupt.S b/cpu/bf537/interrupt.S
index a8be34f..a71df55 100644
--- a/cpu/bf537/interrupt.S
+++ b/cpu/bf537/interrupt.S
@@ -1,7 +1,7 @@
 /*
  * U-boot - interrupt.S Processing of interrupts and exception handling
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -35,8 +35,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #define ASSEMBLY
diff --git a/cpu/bf537/interrupts.c b/cpu/bf537/interrupts.c
index 2ca76ec..d2213b1 100644
--- a/cpu/bf537/interrupts.c
+++ b/cpu/bf537/interrupts.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - interrupts.c Interrupt related routines
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on interrupts.c
  * Copyright 1996 Roman Zippel
@@ -30,8 +30,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
diff --git a/cpu/bf537/ints.c b/cpu/bf537/ints.c
index f476f14..5586689 100644
--- a/cpu/bf537/ints.c
+++ b/cpu/bf537/ints.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - ints.c Interrupt related routines
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on ints.c
  *
@@ -32,8 +32,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
diff --git a/cpu/bf537/serial.c b/cpu/bf537/serial.c
index dd4f916..e04d08a 100644
--- a/cpu/bf537/serial.c
+++ b/cpu/bf537/serial.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - serial.c Serial driver for BF537
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on
  * bf537_serial.c: Serial driver for BlackFin BF537 internal UART.
@@ -38,8 +38,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
diff --git a/cpu/bf537/serial.h b/cpu/bf537/serial.h
index c9ee3dc..76555c2 100644
--- a/cpu/bf537/serial.h
+++ b/cpu/bf537/serial.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - bf537_serial.h Serial Driver defines
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on
  * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver.
@@ -38,8 +38,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _Bf537_SERIAL_H
diff --git a/cpu/bf537/start.S b/cpu/bf537/start.S
index 264e9b6..4e02bcb 100644
--- a/cpu/bf537/start.S
+++ b/cpu/bf537/start.S
@@ -1,7 +1,7 @@
 /*
  * U-boot - start.S Startup file of u-boot for BF537
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on head.S
  * Copyright (c) 2003  Metrowerks/Motorola
@@ -26,8 +26,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 /*
diff --git a/cpu/bf537/start1.S b/cpu/bf537/start1.S
index 72cfafb..6d4731b 100644
--- a/cpu/bf537/start1.S
+++ b/cpu/bf537/start1.S
@@ -1,7 +1,7 @@
 /*
  * U-boot - start1.S Code running out of RAM after relocation
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #define ASSEMBLY
diff --git a/cpu/bf537/traps.c b/cpu/bf537/traps.c
index 994ece8..4e18e27 100644
--- a/cpu/bf537/traps.c
+++ b/cpu/bf537/traps.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - traps.c Routines related to interrupts and exceptions
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on
  * No original Copyright holder listed,
@@ -29,8 +29,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
@@ -39,7 +39,6 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/traps.h>
-#include <asm/page.h>
 #include <asm/machdep.h>
 #include "cpu.h"
 #include <asm/arch/anomaly.h>
diff --git a/cpu/bf561/Makefile b/cpu/bf561/Makefile
index ee7842a..2947169 100644
--- a/cpu/bf561/Makefile
+++ b/cpu/bf561/Makefile
@@ -1,6 +1,6 @@
 # U-boot - Makefile
 #
-# Copyright (c) 2005 blackfin.uclinux.org
+# Copyright (c) 2005-2007 Analog Devices Inc.
 #
 # (C) Copyright 2000-2004
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -20,8 +20,8 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+# MA 02110-1301 USA
 #
 
 include $(TOPDIR)/config.mk
diff --git a/cpu/bf561/config.mk b/cpu/bf561/config.mk
index c49a0ba..f4dc04b 100644
--- a/cpu/bf561/config.mk
+++ b/cpu/bf561/config.mk
@@ -1,6 +1,6 @@
 # U-boot - config.mk
 #
-# Copyright (c) 2005 blackfin.uclinux.org
+# Copyright (c) 2005-2007 Analog Devices Inc.
 #
 # (C) Copyright 2000-2004
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -20,8 +20,8 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+# MA 02110-1301 USA
 #
 
 PLATFORM_RELFLAGS += -mcpu=bf561 -ffixed-P5
diff --git a/cpu/bf561/cpu.c b/cpu/bf561/cpu.c
index a7b53d8..5b907cd 100644
--- a/cpu/bf561/cpu.c
+++ b/cpu/bf561/cpu.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - cpu.c CPU specific functions
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
diff --git a/cpu/bf561/cpu.h b/cpu/bf561/cpu.h
index 821363e..b6b73b1 100644
--- a/cpu/bf561/cpu.h
+++ b/cpu/bf561/cpu.h
@@ -1,7 +1,7 @@
 /*
  *  U-boot - cpu.h
  *
- *  Copyright (c) 2005 blackfin.uclinux.org
+ *  Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _CPU_H_
diff --git a/cpu/bf561/flush.S b/cpu/bf561/flush.S
index 7e12c83..0140a60 100644
--- a/cpu/bf561/flush.S
+++ b/cpu/bf561/flush.S
@@ -1,9 +1,9 @@
-/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved.
- * Copyright (C) 2004 LG SOft India. All Rights Reserved.
+/* Copyright (C) 2003-2007 Analog Devices Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.
  */
+
 #define ASSEMBLY
 
 #include <asm/linkage.h>
diff --git a/cpu/bf561/interrupt.S b/cpu/bf561/interrupt.S
index f82fd9b..21839ce 100644
--- a/cpu/bf561/interrupt.S
+++ b/cpu/bf561/interrupt.S
@@ -1,7 +1,7 @@
 /*
  * U-boot - interrupt.S Processing of interrupts and exception handling
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -35,8 +35,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #define ASSEMBLY
diff --git a/cpu/bf561/interrupts.c b/cpu/bf561/interrupts.c
index e314f60..ecbc6ad 100644
--- a/cpu/bf561/interrupts.c
+++ b/cpu/bf561/interrupts.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - interrupts.c Interrupt related routines
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on interrupts.c
  * Copyright 1996 Roman Zippel
@@ -30,8 +30,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
diff --git a/cpu/bf561/ints.c b/cpu/bf561/ints.c
index 328e5d8..27a38a3 100644
--- a/cpu/bf561/ints.c
+++ b/cpu/bf561/ints.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - ints.c Interrupt related routines
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on ints.c
  *
@@ -32,8 +32,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
diff --git a/cpu/bf561/serial.c b/cpu/bf561/serial.c
index baec1d3..7f5c695 100644
--- a/cpu/bf561/serial.c
+++ b/cpu/bf561/serial.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - serial.c Serial driver for BF561
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on
  * bf533_serial.c: Serial driver for BlackFin BF533 DSP internal UART.
@@ -38,8 +38,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
diff --git a/cpu/bf561/serial.h b/cpu/bf561/serial.h
index 98c1242..c1cbf36 100644
--- a/cpu/bf561/serial.h
+++ b/cpu/bf561/serial.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - bf561_serial.h Serial Driver defines
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on
  * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver.
@@ -38,8 +38,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _Bf561_SERIAL_H
diff --git a/cpu/bf561/start.S b/cpu/bf561/start.S
index 9333648..bd26cf3 100644
--- a/cpu/bf561/start.S
+++ b/cpu/bf561/start.S
@@ -1,7 +1,7 @@
 /*
  * U-boot - start.S Startup file of u-boot for BF533/BF561
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on head.S
  * Copyright (c) 2003  Metrowerks/Motorola
@@ -26,8 +26,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 /*
diff --git a/cpu/bf561/start1.S b/cpu/bf561/start1.S
index 72cfafb..6d4731b 100644
--- a/cpu/bf561/start1.S
+++ b/cpu/bf561/start1.S
@@ -1,7 +1,7 @@
 /*
  * U-boot - start1.S Code running out of RAM after relocation
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #define ASSEMBLY
diff --git a/cpu/bf561/traps.c b/cpu/bf561/traps.c
index f5ff3a8..7e2dcd1 100644
--- a/cpu/bf561/traps.c
+++ b/cpu/bf561/traps.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - traps.c Routines related to interrupts and exceptions
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on
  * No original Copyright holder listed,
@@ -29,8 +29,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c
index 13a3870..e59bd85 100644
--- a/cpu/mpc5xxx/fec.c
+++ b/cpu/mpc5xxx/fec.c
@@ -467,6 +467,10 @@
 		miiphy_write(dev->name, phyAddr, 0x0, 0x8000);
 		udelay(1000);
 
+#if defined(CONFIG_UC101)
+		/* Set the LED configuration Register for the UC101 Board */
+		miiphy_write(dev->name, phyAddr, 0x14, 0x4122);
+#endif
 		if (fec->xcv_type == MII10) {
 			/*
 			 * Force 10Base-T, FDX operation
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 2d8740c..8e6bc84 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -125,6 +125,7 @@
 	return (val & SDR0_SDCS_SDD);
 #endif
 }
+#endif
 
 #if defined(CONFIG_440GX)
 #define SDR0_PINSTP_SHIFT	29
@@ -178,16 +179,37 @@
 };
 #endif
 
+#if defined(CONFIG_405EZ)
+#define SDR0_PINSTP_SHIFT	28
+static char *bootstrap_str[] = {
+	"EBC (8 bits)",
+	"SPI (fast)",
+	"NAND (512 page, 4 addr cycle)",
+	"I2C (Addr 0x50)",
+	"EBC (32 bits)",
+	"I2C (Addr 0x50)",
+	"NAND (2K page, 5 addr cycle)",
+	"I2C (Addr 0x50)",
+	"EBC (16 bits)",
+	"Reserved",
+	"NAND (2K page, 4 addr cycle)",
+	"I2C (Addr 0x50)",
+	"NAND (512 page, 3 addr cycle)",
+	"I2C (Addr 0x50)",
+	"SPI (slow)",
+	"I2C (Addr 0x50)",
+};
+#endif
+
 #if defined(SDR0_PINSTP_SHIFT)
 static int bootstrap_option(void)
 {
 	unsigned long val;
 
-	mfsdr(sdr_pinstp, val);
-	return ((val & 0xe0000000) >> SDR0_PINSTP_SHIFT);
+	mfsdr(SDR_PINSTP, val);
+	return ((val & 0xf0000000) >> SDR0_PINSTP_SHIFT);
 }
 #endif /* SDR0_PINSTP_SHIFT */
-#endif
 
 
 #if defined(CONFIG_440)
@@ -403,11 +425,11 @@
 
 #if defined(I2C_BOOTROM)
 	printf ("       I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis");
+#endif	/* I2C_BOOTROM */
 #if defined(SDR0_PINSTP_SHIFT)
 	printf ("       Bootstrap Option %c - ", (char)bootstrap_option() + 'A');
 	printf ("Boot ROM Location %s\n", bootstrap_str[bootstrap_option()]);
 #endif	/* SDR0_PINSTP_SHIFT */
-#endif	/* I2C_BOOTROM */
 
 #if defined(CONFIG_PCI)
 	printf ("       Internal PCI arbiter %sabled", pci_arbiter_enabled() ? "en" : "dis");
diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c
index 8f4da86..47c264e 100644
--- a/cpu/ppc4xx/i2c.c
+++ b/cpu/ppc4xx/i2c.c
@@ -91,7 +91,6 @@
 
 void i2c_init(int speed, int slaveadd)
 {
-	sys_info_t sysInfo;
 	unsigned long freqOPB;
 	int val, divisor;
 	int bus;
@@ -124,8 +123,7 @@
 
 		/* Clock divide Register */
 		/* get OPB frequency */
-		get_sys_info(&sysInfo);
-		freqOPB = sysInfo.freqPLB / sysInfo.pllOpbDiv;
+		freqOPB = get_OPB_freq();
 		/* set divisor according to freqOPB */
 		divisor = (freqOPB - 1) / 10000000;
 		if (divisor == 0)
diff --git a/doc/README.Lite5200B_low_power b/doc/README.Lite5200B_low_power
new file mode 100644
index 0000000..5b04fbb
--- /dev/null
+++ b/doc/README.Lite5200B_low_power
@@ -0,0 +1,22 @@
+Lite5200B wakeup from low-power mode (CONFIG_LITE5200B_PM)
+----------------------------------------------------------
+
+Low-power mode as described in Lite5200B User's Manual, means that
+with support of MC68HLC908QT1 microcontroller (refered to as QT),
+everything but the SDRAM can be powered down. This brings
+maximum power saving, while one can still restore previous state
+quickly.
+
+Quick overview where U-Boot comes into the picture:
+- OS saves device states
+- OS saves wakeup handler address to physical 0x0, puts SDRAM into
+  self-refresh and signals to QT, it should power down the board
+- / board is sleeping here /
+- someone presses SW4 (connected to QT)
+- U-Boot checks PSC2_4 pin, if QT drives it down, then we woke up,
+  so get SDRAM out of self-refresh and transfer control to OS
+  wakeup handler
+- OS restores device states
+
+This was tested on Linux with USB and Ethernet in use. Adding
+support for other devices is an OS issue.
diff --git a/include/asm-avr32/arch-at32ap7000/gpio.h b/include/asm-avr32/arch-at32ap7000/gpio.h
index 8d9b092..e4812d4 100644
--- a/include/asm-avr32/arch-at32ap7000/gpio.h
+++ b/include/asm-avr32/arch-at32ap7000/gpio.h
@@ -210,4 +210,3 @@
 void gpio_enable_mmci(void);
 
 #endif /* __ASM_AVR32_ARCH_GPIO_H__ */
-
diff --git a/include/asm-blackfin/arch-bf533/bf533_serial.h b/include/asm-blackfin/arch-bf533/bf533_serial.h
index ce58863..65749ee 100644
--- a/include/asm-blackfin/arch-bf533/bf533_serial.h
+++ b/include/asm-blackfin/arch-bf533/bf533_serial.h
@@ -1,7 +1,7 @@
 /*
  * U-boot bf533_serial.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BF533_SERIAL_H_
diff --git a/include/asm-blackfin/arch-bf533/bf5xx_rtc.h b/include/asm-blackfin/arch-bf533/bf5xx_rtc.h
index bc09922..f4440a8 100644
--- a/include/asm-blackfin/arch-bf533/bf5xx_rtc.h
+++ b/include/asm-blackfin/arch-bf533/bf5xx_rtc.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - bf533_rtc.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BF533_RTC_H_
diff --git a/include/asm-blackfin/arch-bf533/cplbtab.h b/include/asm-blackfin/arch-bf533/cplbtab.h
deleted file mode 100644
index 89f0325..0000000
--- a/include/asm-blackfin/arch-bf533/cplbtab.h
+++ /dev/null
@@ -1,482 +0,0 @@
-/*This file is subject to the terms and conditions of the GNU General Public
- * License.
- *
- * Blackfin BF533/2.6 support : LG Soft India
- * Updated : Ashutosh Singh / Jahid Khan : Rrap Software Pvt Ltd
- * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's
- *	        shouldn't be victimized. cplbmgr.S search logic is corrected
- *	        to findout the appropriate victim.
- *	     2. SDRAM_IGENERIC in dpdt_table is replaced with SDRAM_DGENERIC
- *	     : LG Soft India
- */
-#include <config.h>
-
-#ifndef __ARCH_BFINNOMMU_CPLBTAB_H
-#define __ARCH_BFINNOMMU_CPLBTAB_H
-
-/*************************************************************************
- *  			ICPLB TABLE
- *************************************************************************/
-
-.data
-/* This table is configurable */
-    .align 4;
-
-/* Data Attibutes*/
-
-#define SDRAM_IGENERIC		(PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID)
-#define SDRAM_IKERNEL		(PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
-#define L1_IMEMORY            	(PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
-#define SDRAM_INON_CHBL		(PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID)
-
-/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/
-
-#define ANOMALY_05000158		0x200
-#ifdef CONFIG_BLKFIN_WB		/*Write Back Policy */
-#define SDRAM_DGENERIC  	(PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_DNON_CHBL         (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_DKERNEL 		(PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158)
-#define L1_DMEMORY		(PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_EBIU		(PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158)
-
-#else				/*Write Through */
-#define SDRAM_DGENERIC 		(PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_DNON_CHBL         (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_DKERNEL 		(PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158)
-#define L1_DMEMORY		(PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_EBIU		(PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158)
-#endif
-
-.align 4;
-.global _ipdt_table _ipdt_table:.byte4 0x00000000;
-.byte4(SDRAM_IKERNEL);		/*SDRAM_Page0 */
-.byte4 0x00400000;
-.byte4(SDRAM_IKERNEL);		/*SDRAM_Page1 */
-.byte4 0x00800000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page2 */
-.byte4 0x00C00000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page3 */
-.byte4 0x01000000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page4 */
-.byte4 0x01400000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page5 */
-.byte4 0x01800000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page6 */
-.byte4 0x01C00000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page7 */
-#ifndef CONFIG_EZKIT		/*STAMP Memory regions */
-.byte4 0x02000000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page8 */
-.byte4 0x02400000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page9 */
-.byte4 0x02800000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page10 */
-.byte4 0x02C00000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page11 */
-.byte4 0x03000000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page12 */
-.byte4 0x03400000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page13 */
-.byte4 0x03800000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page14 */
-.byte4 0x03C00000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page15 */
-#endif
-.byte4 0x20000000;
-.byte4(SDRAM_EBIU);		/* Async Memory Bank 2 (Secnd) */
-
-#ifdef CONFIG_STAMP
-.byte4 0x04000000;
-.byte4(SDRAM_IGENERIC);
-.byte4 0x04400000;
-.byte4(SDRAM_IGENERIC);
-.byte4 0x04800000;
-.byte4(SDRAM_IGENERIC);
-.byte4 0x04C00000;
-.byte4(SDRAM_IGENERIC);
-.byte4 0x05000000;
-.byte4(SDRAM_IGENERIC);
-.byte4 0x05400000;
-.byte4(SDRAM_IGENERIC);
-.byte4 0x05800000;
-.byte4(SDRAM_IGENERIC);
-.byte4 0x05C00000;
-.byte4(SDRAM_IGENERIC);
-.byte4 0x06000000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page25 */
-.byte4 0x06400000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page26 */
-.byte4 0x06800000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page27 */
-.byte4 0x06C00000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page28 */
-.byte4 0x07000000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page29 */
-.byte4 0x07400000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page30 */
-.byte4 0x07800000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page31 */
-.byte4 0x07C00000;
-.byte4(SDRAM_IKERNEL);		/*SDRAM_Page32 */
-#endif
-.byte4 0xffffffff;		/* end of section - termination */
-
-/**********************************************************************
- *		PAGE DESCRIPTOR TABLE
- *
- **********************************************************************/
-
-/* Till here we are discussing about the static memory management model.
- * However, the operating envoronments commonly define more CPLB
- * descriptors to cover the entire addressable memory than will fit into
- * the available on-chip 16 CPLB MMRs. When this happens, the below table
- * will be used which will hold all the potentially required CPLB descriptors
- *
- * This is how Page descriptor Table is implemented in uClinux/Blackfin.
- */
-.global _dpdt_table _dpdt_table:.byte4 0x00000000;
-.byte4(SDRAM_DKERNEL);		/*SDRAM_Page0 */
-.byte4 0x00400000;
-.byte4(SDRAM_DKERNEL);		/*SDRAM_Page1 */
-.byte4 0x00800000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page2 */
-.byte4 0x00C00000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page3 */
-.byte4 0x01000000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page4 */
-.byte4 0x01400000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page5 */
-.byte4 0x01800000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page6 */
-.byte4 0x01C00000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page7 */
-
-#ifndef CONFIG_EZKIT
-.byte4 0x02000000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page8 */
-.byte4 0x02400000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page9 */
-.byte4 0x02800000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page10 */
-.byte4 0x02C00000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page11 */
-.byte4 0x03000000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page12 */
-.byte4 0x03400000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page13 */
-.byte4 0x03800000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page14 */
-.byte4 0x03C00000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page15 */
-#endif
-
-#ifdef CONFIG_STAMP
-.byte4 0x04000000;
-.byte4(SDRAM_DGENERIC);
-.byte4 0x04400000;
-.byte4(SDRAM_DGENERIC);
-.byte4 0x04800000;
-.byte4(SDRAM_DGENERIC);
-.byte4 0x04C00000;
-.byte4(SDRAM_DGENERIC);
-.byte4 0x05000000;
-.byte4(SDRAM_DGENERIC);
-.byte4 0x05400000;
-.byte4(SDRAM_DGENERIC);
-.byte4 0x05800000;
-.byte4(SDRAM_DGENERIC);
-.byte4 0x05C00000;
-.byte4(SDRAM_DGENERIC);
-.byte4 0x06000000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page25 */
-.byte4 0x06400000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page26 */
-.byte4 0x06800000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page27 */
-.byte4 0x06C00000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page28 */
-.byte4 0x07000000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page29 */
-.byte4 0x07400000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page30 */
-.byte4 0x07800000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page31 */
-.byte4 0x07C00000;
-.byte4(SDRAM_DKERNEL);		/*SDRAM_Page32 */
-#endif
-
-.byte4 0x20000000;
-.byte4(SDRAM_EBIU);		/* Async Memory Bank 0 (Prim A) */
-
-#if (BFIN_CPU == ADSP_BF533)
-.byte4 0xFF800000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF801000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF802000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF803000;
-.byte4(L1_DMEMORY);
-#endif
-.byte4 0xFF804000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF805000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF806000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF807000;
-.byte4(L1_DMEMORY);
-#if (BFIN_CPU == ADSP_BF533)
-.byte4 0xFF900000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF901000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF902000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF903000;
-.byte4(L1_DMEMORY);
-#endif
-#if ((BFIN_CPU == ADSP_BF532) || (BFIN_CPU == ADSP_BF533))
-.byte4 0xFF904000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF905000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF906000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF907000;
-.byte4(L1_DMEMORY);
-#endif
-.byte4 0xFFB00000;
-.byte4(L1_DMEMORY);
-
-.byte4 0xffffffff;		/*end of section - termination */
-
-#ifdef CONFIG_CPLB_INFO
-.global _ipdt_swapcount_table;	/* swapin count first, then swapout count */
-_ipdt_swapcount_table:
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 10 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 20 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 30 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 40 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 50 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 60 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 70 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 80 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 90 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 100 */
-
-.global _dpdt_swapcount_table;	/* swapin count first, then swapout count */
-_dpdt_swapcount_table:
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 10 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 20 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 30 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 40 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 50 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 60 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 70 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 80 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 80 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 100 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 110 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 120 */
-#endif
-
-#endif	/*__ARCH_BFINNOMMU_CPLBTAB_H*/
diff --git a/include/asm-blackfin/arch-bf533/irq.h b/include/asm-blackfin/arch-bf533/irq.h
index 9c5230d..3235745 100644
--- a/include/asm-blackfin/arch-bf533/irq.h
+++ b/include/asm-blackfin/arch-bf533/irq.h
@@ -1,7 +1,7 @@
 /*
  * U-boot bf533_irq.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on
  * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c
@@ -33,8 +33,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BF533_IRQ_H_
diff --git a/include/asm-blackfin/arch-bf537/bf537_serial.h b/include/asm-blackfin/arch-bf537/bf537_serial.h
index 1610411..64088f2 100644
--- a/include/asm-blackfin/arch-bf537/bf537_serial.h
+++ b/include/asm-blackfin/arch-bf537/bf537_serial.h
@@ -1,7 +1,7 @@
 /*
  * U-boot bf537_serial.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BF537_SERIAL_H_
diff --git a/include/asm-blackfin/arch-bf537/bf5xx_rtc.h b/include/asm-blackfin/arch-bf537/bf5xx_rtc.h
index 0043e42..db5cc6f 100644
--- a/include/asm-blackfin/arch-bf537/bf5xx_rtc.h
+++ b/include/asm-blackfin/arch-bf537/bf5xx_rtc.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - bf537_rtc.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BF537_RTC_H_
diff --git a/include/asm-blackfin/arch-bf537/cplbtab.h b/include/asm-blackfin/arch-bf537/cplbtab.h
deleted file mode 100644
index c5151bb..0000000
--- a/include/asm-blackfin/arch-bf537/cplbtab.h
+++ /dev/null
@@ -1,408 +0,0 @@
-/*This file is subject to the terms and conditions of the GNU General Public
- * License.
- *
- * Blackfin BF533/2.6 support : LG Soft India
- * Updated : Ashutosh Singh / Jahid Khan : Rrap Software Pvt Ltd
- * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's
- *	        shouldn't be victimized. cplbmgr.S search logic is corrected
- *	        to findout the appropriate victim.
- *	     2. SDRAM_IGENERIC in dpdt_table is replaced with SDRAM_DGENERIC
- *	     : LG Soft India
- */
-#include <config.h>
-
-#ifndef __ARCH_BFINNOMMU_CPLBTAB_H
-#define __ARCH_BFINNOMMU_CPLBTAB_H
-
-/*
- * ICPLB TABLE
- */
-
-.data
-/* This table is configurable */
-    .align 4;
-
-/* Data Attibutes*/
-
-#define SDRAM_IGENERIC		(PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID)
-#define SDRAM_IKERNEL		(PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
-#define L1_IMEMORY		(PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
-#define SDRAM_INON_CHBL		(PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID)
-
-/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/
-
-#define ANOMALY_05000158	0x200
-#ifdef CONFIG_BLKFIN_WB		/*Write Back Policy */
-#define SDRAM_DGENERIC		(PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_DNON_CHBL		(PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_DKERNEL		(PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158)
-#define L1_DMEMORY		(PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_EBIU		(PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158)
-
-#else				/*Write Through */
-#define SDRAM_DGENERIC		(PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_DNON_CHBL		(PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_DKERNEL		(PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158)
-#define L1_DMEMORY		(PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_EBIU		(PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158)
-#endif
-
-.align 4;
-.global _ipdt_table _ipdt_table:.byte4 0x00000000;
-.byte4(SDRAM_IKERNEL);		/*SDRAM_Page0 */
-.byte4 0x00400000;
-.byte4(SDRAM_IKERNEL);		/*SDRAM_Page1 */
-.byte4 0x00800000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page2 */
-.byte4 0x00C00000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page3 */
-.byte4 0x01000000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page4 */
-.byte4 0x01400000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page5 */
-.byte4 0x01800000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page6 */
-.byte4 0x01C00000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page7 */
-.byte4 0x02000000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page8 */
-.byte4 0x02400000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page9 */
-.byte4 0x02800000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page10 */
-.byte4 0x02C00000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page11 */
-.byte4 0x03000000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page12 */
-.byte4 0x03400000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page13 */
-.byte4 0x03800000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page14 */
-.byte4 0x03C00000;
-.byte4(SDRAM_IGENERIC);		/*SDRAM_Page15 */
-.byte4 0x20000000;
-.byte4(SDRAM_EBIU);		/* Async Memory Bank 2 (Secnd) */
-
-.byte4 0xffffffff;		/* end of section - termination */
-
-/*
- * PAGE DESCRIPTOR TABLE
- *
- */
-
-/*
- * Till here we are discussing about the static memory management model.
- * However, the operating envoronments commonly define more CPLB
- * descriptors to cover the entire addressable memory than will fit into
- * the available on-chip 16 CPLB MMRs. When this happens, the below table
- * will be used which will hold all the potentially required CPLB descriptors
- *
- * This is how Page descriptor Table is implemented in uClinux/Blackfin.
- */
-.global _dpdt_table _dpdt_table:.byte4 0x00000000;
-.byte4(SDRAM_DKERNEL);		/*SDRAM_Page0 */
-.byte4 0x00400000;
-.byte4(SDRAM_DKERNEL);		/*SDRAM_Page1 */
-.byte4 0x00800000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page2 */
-.byte4 0x00C00000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page3 */
-.byte4 0x01000000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page4 */
-.byte4 0x01400000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page5 */
-.byte4 0x01800000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page6 */
-.byte4 0x01C00000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page7 */
-.byte4 0x02000000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page8 */
-.byte4 0x02400000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page9 */
-.byte4 0x02800000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page10 */
-.byte4 0x02C00000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page11 */
-.byte4 0x03000000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page12 */
-.byte4 0x03400000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page13 */
-.byte4 0x03800000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page14 */
-.byte4 0x03C00000;
-.byte4(SDRAM_DGENERIC);		/*SDRAM_Page15 */
-.byte4 0x20000000;
-.byte4(SDRAM_EBIU);		/* Async Memory Bank 0 (Prim A) */
-
-#if ((BFIN_CPU == ADSP_BF534) || (BFIN_CPU == ADSP_BF537))
-.byte4 0xFF800000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF801000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF802000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF803000;
-.byte4(L1_DMEMORY);
-#endif
-.byte4 0xFF804000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF805000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF806000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF807000;
-.byte4(L1_DMEMORY);
-#if ((BFIN_CPU == ADSP_BF534) || (BFIN_CPU == ADSP_BF537))
-.byte4 0xFF900000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF901000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF902000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF903000;
-.byte4(L1_DMEMORY);
-#endif
-.byte4 0xFF904000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF905000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF906000;
-.byte4(L1_DMEMORY);
-.byte4 0xFF907000;
-.byte4(L1_DMEMORY);
-
-.byte4 0xFFB00000;
-.byte4(L1_DMEMORY);
-
-.byte4 0xffffffff;		/*end of section - termination */
-
-#ifdef CONFIG_CPLB_INFO
-.global _ipdt_swapcount_table;	/* swapin count first, then swapout count */
-_ipdt_swapcount_table:
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 10 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 20 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 30 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 40 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 50 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 60 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 70 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 80 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 90 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 100 */
-
-.global _dpdt_swapcount_table;	/* swapin count first, then swapout count */
-_dpdt_swapcount_table:
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 10 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 20 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 30 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 40 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 50 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 60 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 70 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 80 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 80 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 100 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 110 */
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;
-.byte4 0x00000000;		/* 120 */
-
-#endif
-
-#endif	/*__ARCH_BFINNOMMU_CPLBTAB_H*/
diff --git a/include/asm-blackfin/arch-bf537/irq.h b/include/asm-blackfin/arch-bf537/irq.h
index 4cb4c15..527d8a2 100644
--- a/include/asm-blackfin/arch-bf537/irq.h
+++ b/include/asm-blackfin/arch-bf537/irq.h
@@ -1,7 +1,7 @@
 /*
  * U-boot bf537_irq.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on
  * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c
@@ -33,8 +33,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BF537_IRQ_H_
diff --git a/include/asm-blackfin/arch-bf561/bf561_serial.h b/include/asm-blackfin/arch-bf561/bf561_serial.h
index 0810228..eb01ca2 100644
--- a/include/asm-blackfin/arch-bf561/bf561_serial.h
+++ b/include/asm-blackfin/arch-bf561/bf561_serial.h
@@ -1,7 +1,7 @@
 /*
  * U-boot bf561_serial.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BF561_SERIAL_H_
diff --git a/include/asm-blackfin/arch-common/bf53x_rtc.h b/include/asm-blackfin/arch-common/bf53x_rtc.h
index bc09922..f4440a8 100644
--- a/include/asm-blackfin/arch-common/bf53x_rtc.h
+++ b/include/asm-blackfin/arch-common/bf53x_rtc.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - bf533_rtc.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BF533_RTC_H_
diff --git a/include/asm-blackfin/bitops.h b/include/asm-blackfin/bitops.h
index 7766c4a..438e50b 100644
--- a/include/asm-blackfin/bitops.h
+++ b/include/asm-blackfin/bitops.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - bitops.h Routines for bit operations
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BLACKFIN_BITOPS_H
diff --git a/include/asm-blackfin/blackfin.h b/include/asm-blackfin/blackfin.h
index 0ec9207..bf502a4 100644
--- a/include/asm-blackfin/blackfin.h
+++ b/include/asm-blackfin/blackfin.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - blackfin.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BLACKFIN_H_
diff --git a/include/asm-blackfin/blackfin_defs.h b/include/asm-blackfin/blackfin_defs.h
index 2190215..451d29c 100644
--- a/include/asm-blackfin/blackfin_defs.h
+++ b/include/asm-blackfin/blackfin_defs.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - blackfin_defs.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef __BLACKFIN_DEFS_H__
diff --git a/include/asm-blackfin/byteorder.h b/include/asm-blackfin/byteorder.h
index 3b4df4e..a1a52a5 100644
--- a/include/asm-blackfin/byteorder.h
+++ b/include/asm-blackfin/byteorder.h
@@ -1,7 +1,7 @@
 /*
  * U-boot -  byteorder.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BLACKFIN_BYTEORDER_H
diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h
index dd695e1..9d8d9ec 100644
--- a/include/asm-blackfin/cplb.h
+++ b/include/asm-blackfin/cplb.h
@@ -50,7 +50,7 @@
 
 #define SDRAM_IGENERIC          (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID)
 #define SDRAM_IKERNEL           (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
-#define L1_IMEMORY              (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
+#define L1_IMEMORY              (PAGE_SIZE_1MB | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
 #define SDRAM_INON_CHBL         (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID)
 
 /*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/
@@ -61,20 +61,20 @@
 #define SDRAM_DGENERIC          (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
 #define SDRAM_DNON_CHBL         (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
 #define SDRAM_DKERNEL           (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158)
-#define L1_DMEMORY              (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
+#define L1_DMEMORY              (PAGE_SIZE_4MB | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
 #define SDRAM_EBIU              (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158)
 
 #else				/*Write Through */
 #define SDRAM_DGENERIC          (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
 #define SDRAM_DNON_CHBL         (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
 #define SDRAM_DKERNEL           (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158)
-#define L1_DMEMORY              (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
+#define L1_DMEMORY              (PAGE_SIZE_4MB | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
 #define SDRAM_EBIU              (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158)
 #endif
 
 #if defined(CONFIG_BF561)
-#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 2)	/* SDRAM +L1 + ASYNC_Memory */
+#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 1 + 4)	/* SDRAM +L1 + ASYNC_Memory */
 #else
-#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 1 + 3)	/* SDRAM + L1 + ASYNC_Memory */
+#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 2)	/* SDRAM + L1 + ASYNC_Memory */
 #endif
 #endif				/* _CPLB_H */
diff --git a/include/asm-blackfin/current.h b/include/asm-blackfin/current.h
index 108c279..ed2b851 100644
--- a/include/asm-blackfin/current.h
+++ b/include/asm-blackfin/current.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - current.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BLACKFIN_CURRENT_H
diff --git a/include/asm-blackfin/delay.h b/include/asm-blackfin/delay.h
index 0c01e9f..ea0b366 100644
--- a/include/asm-blackfin/delay.h
+++ b/include/asm-blackfin/delay.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - delay.h Routines for introducing delays
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BLACKFIN_DELAY_H
diff --git a/include/asm-blackfin/entry.h b/include/asm-blackfin/entry.h
index b64d406..eb84f11 100644
--- a/include/asm-blackfin/entry.h
+++ b/include/asm-blackfin/entry.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - entry.h Routines for context saving and restoring
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef __BLACKFIN_ENTRY_H
@@ -27,7 +27,6 @@
 
 #include <linux/config.h>
 #include <asm/setup.h>
-#include <asm/page.h>
 
 /*
  * Stack layout in 'ret_from_exception':
diff --git a/include/asm-blackfin/errno.h b/include/asm-blackfin/errno.h
index 713bba0..0d2c618 100644
--- a/include/asm-blackfin/errno.h
+++ b/include/asm-blackfin/errno.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - errno.h Error number defines
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BLACKFIN_ERRNO_H
diff --git a/include/asm-blackfin/global_data.h b/include/asm-blackfin/global_data.h
index 1c73853..9024d0a 100644
--- a/include/asm-blackfin/global_data.h
+++ b/include/asm-blackfin/global_data.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - global_data.h Declarations for global data of u-boot
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef	__ASM_GBL_DATA_H
diff --git a/include/asm-blackfin/hw_irq.h b/include/asm-blackfin/hw_irq.h
index baa3e0c..9b36055 100644
--- a/include/asm-blackfin/hw_irq.h
+++ b/include/asm-blackfin/hw_irq.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - hw_irq.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on
  * linux/arch/$(ARCH)/platform/$(PLATFORM)/hw_irq.h
@@ -24,8 +24,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <linux/config.h>
diff --git a/include/asm-blackfin/io-kernel.h b/include/asm-blackfin/io-kernel.h
index 3c087c3..5d0ad06 100644
--- a/include/asm-blackfin/io-kernel.h
+++ b/include/asm-blackfin/io-kernel.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - io-kernel.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BLACKFIN_IO_H
diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h
index 6bab6e7..332d2c6 100644
--- a/include/asm-blackfin/io.h
+++ b/include/asm-blackfin/io.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - io.h IO routines
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BLACKFIN_IO_H
@@ -37,6 +37,7 @@
 
 static inline void sync(void)
 {
+	__builtin_bfin_ssync();
 }
 
 /*
diff --git a/include/asm-blackfin/irq.h b/include/asm-blackfin/irq.h
index aede742..1fff316 100644
--- a/include/asm-blackfin/irq.h
+++ b/include/asm-blackfin/irq.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - irq.h Interrupt related header file
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file was based on
  * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c
@@ -31,8 +31,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BLACKFIN_IRQ_H_
diff --git a/include/asm-blackfin/linkage.h b/include/asm-blackfin/linkage.h
index 18f0c36..4fc1acf 100644
--- a/include/asm-blackfin/linkage.h
+++ b/include/asm-blackfin/linkage.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - linkage.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _LINUX_LINKAGE_H
diff --git a/include/asm-blackfin/machdep.h b/include/asm-blackfin/machdep.h
index 4fea74c..8bf9473 100644
--- a/include/asm-blackfin/machdep.h
+++ b/include/asm-blackfin/machdep.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - machdep.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BLACKFIN_MACHDEP_H
diff --git a/include/asm-blackfin/mem_init.h b/include/asm-blackfin/mem_init.h
index d9d8bf9..cb448ad 100644
--- a/include/asm-blackfin/mem_init.h
+++ b/include/asm-blackfin/mem_init.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - mem_init.h Header file for memory initialization
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #if (CONFIG_MEM_MT48LC16M16A2TG_75 || \
diff --git a/include/asm-blackfin/page.h b/include/asm-blackfin/page.h
deleted file mode 100644
index d59828c..0000000
--- a/include/asm-blackfin/page.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * U-boot -  page.h
- *
- * Copyright (c) 2005 blackfin.uclinux.org
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _BLACKFIN_PAGE_H
-#define _BLACKFIN_PAGE_H
-
-#include <linux/config.h>
-
-/* PAGE_SHIFT determines the page size */
-
-#define PAGE_SHIFT			(12)
-#define PAGE_SIZE			(4096)
-#define PAGE_MASK			(~(PAGE_SIZE-1))
-
-#ifdef __KERNEL__
-
-#include <asm/setup.h>
-
-#if PAGE_SHIFT < 13
-#define					KTHREAD_SIZE (8192)
-#else
-#define					KTHREAD_SIZE PAGE_SIZE
-#endif
-
-#ifndef __ASSEMBLY__
-
-#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr)	free_page(addr)
-
-#define clear_page(page)		memset((page), 0, PAGE_SIZE)
-#define copy_page(to,from)		memcpy((to), (from), PAGE_SIZE)
-
-#define clear_user_page(page, vaddr)	clear_page(page)
-#define copy_user_page(to, from, vaddr)	copy_page(to, from)
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct {
-	unsigned long pte;
-} pte_t;
-typedef struct {
-	unsigned long pmd[16];
-} pmd_t;
-typedef struct {
-	unsigned long pgd;
-} pgd_t;
-typedef struct {
-	unsigned long pgprot;
-} pgprot_t;
-
-#define pte_val(x)			((x).pte)
-#define pmd_val(x)			((&x)->pmd[0])
-#define pgd_val(x)			((x).pgd)
-#define pgprot_val(x)			((x).pgprot)
-
-#define __pte(x)			((pte_t) { (x) } )
-#define __pmd(x)			((pmd_t) { (x) } )
-#define __pgd(x)			((pgd_t) { (x) } )
-#define __pgprot(x)			((pgprot_t) { (x) } )
-
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)		(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
-/* Pure 2^n version of get_order */
-extern __inline__ int get_order(unsigned long size)
-{
-	int order;
-
-	size = (size - 1) >> (PAGE_SHIFT - 1);
-	order = -1;
-	do {
-		size >>= 1;
-		order++;
-	} while (size);
-	return order;
-}
-
-#endif	/* !__ASSEMBLY__ */
-
-#include <asm/page_offset.h>
-
-#define PAGE_OFFSET			(PAGE_OFFSET_RAW)
-
-#ifndef __ASSEMBLY__
-
-#define __pa(vaddr)			virt_to_phys((void *)vaddr)
-#define __va(paddr)			phys_to_virt((unsigned long)paddr)
-
-#define MAP_NR(addr)			(((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
-#define virt_to_page(addr)		(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
-#define VALID_PAGE(page)		((page - mem_map) < max_mapnr)
-
-#define PAGE_BUG(page) do	{ \
-	BUG(); \
-} while (0)
-
-#endif
-
-#endif
-
-#endif
diff --git a/include/asm-blackfin/page_offset.h b/include/asm-blackfin/page_offset.h
index 262473f..cfd8f1f 100644
--- a/include/asm-blackfin/page_offset.h
+++ b/include/asm-blackfin/page_offset.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - page_offset.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 /*
diff --git a/include/asm-blackfin/posix_types.h b/include/asm-blackfin/posix_types.h
index f1f2b5f..27889e8 100644
--- a/include/asm-blackfin/posix_types.h
+++ b/include/asm-blackfin/posix_types.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - posix_types.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef __ARCH_BLACKFIN_POSIX_TYPES_H
diff --git a/include/asm-blackfin/processor.h b/include/asm-blackfin/processor.h
index df49bed..6cd4f56 100644
--- a/include/asm-blackfin/processor.h
+++ b/include/asm-blackfin/processor.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - processor.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on
  * include/asm-m68k/processor.h
@@ -23,8 +23,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef __ASM_BLACKFIN_PROCESSOR_H
diff --git a/include/asm-blackfin/ptrace.h b/include/asm-blackfin/ptrace.h
index afd5777..f1b7d00 100644
--- a/include/asm-blackfin/ptrace.h
+++ b/include/asm-blackfin/ptrace.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - ptrace.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BLACKFIN_PTRACE_H
diff --git a/include/asm-blackfin/segment.h b/include/asm-blackfin/segment.h
index 9e6d817..f309543 100644
--- a/include/asm-blackfin/segment.h
+++ b/include/asm-blackfin/segment.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - segment.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BLACKFIN_SEGMENT_H
diff --git a/include/asm-blackfin/setup.h b/include/asm-blackfin/setup.h
index a3c1715..b6b8267 100644
--- a/include/asm-blackfin/setup.h
+++ b/include/asm-blackfin/setup.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - setup.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on
  * asm/setup.h -- Definition of the Linux/Blackfin setup information
@@ -22,8 +22,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BLACKFIN_SETUP_H
diff --git a/include/asm-blackfin/shared_resources.h b/include/asm-blackfin/shared_resources.h
index fbef186..d280ffe 100644
--- a/include/asm-blackfin/shared_resources.h
+++ b/include/asm-blackfin/shared_resources.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - setup.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _SHARED_RESOURCES_H_
diff --git a/include/asm-blackfin/string.h b/include/asm-blackfin/string.h
index aac6bc9..dd50207 100644
--- a/include/asm-blackfin/string.h
+++ b/include/asm-blackfin/string.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - string.h String functions
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 /* Changed by Lineo Inc. May 2001 */
@@ -30,7 +30,6 @@
 #ifdef __KERNEL__		/* only set these up for kernel code */
 
 #include <asm/setup.h>
-#include <asm/page.h>
 #include <config.h>
 #include <asm/blackfin.h>
 
diff --git a/include/asm-blackfin/system.h b/include/asm-blackfin/system.h
index 0e53adf..eda887f 100644
--- a/include/asm-blackfin/system.h
+++ b/include/asm-blackfin/system.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - system.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BLACKFIN_SYSTEM_H
diff --git a/include/asm-blackfin/traps.h b/include/asm-blackfin/traps.h
index 29e6eba..b90ceda 100644
--- a/include/asm-blackfin/traps.h
+++ b/include/asm-blackfin/traps.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - traps.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on
  * linux/include/asm/traps.h
@@ -23,8 +23,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 /*
diff --git a/include/asm-blackfin/types.h b/include/asm-blackfin/types.h
index 942ed27..665a419 100644
--- a/include/asm-blackfin/types.h
+++ b/include/asm-blackfin/types.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - types.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _BLACKFIN_TYPES_H
diff --git a/include/asm-blackfin/u-boot.h b/include/asm-blackfin/u-boot.h
index e1a435a..b4928da 100644
--- a/include/asm-blackfin/u-boot.h
+++ b/include/asm-blackfin/u-boot.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - u-boot.h Structure declarations for board specific data
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,15 +21,15 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef _U_BOOT_H_
 #define _U_BOOT_H_	1
 
 typedef struct bd_info {
-	int bi_baudrate;	/* serial console baudrate */
+	int bi_baudrate;		/* serial console baudrate */
 	unsigned long bi_ip_addr;	/* IP Address */
 	unsigned char bi_enetaddr[6];	/* Ethernet adress */
 	unsigned long bi_arch_number;	/* unique id for this board */
diff --git a/include/asm-blackfin/uaccess.h b/include/asm-blackfin/uaccess.h
index 61e2bfe..6e913bb 100644
--- a/include/asm-blackfin/uaccess.h
+++ b/include/asm-blackfin/uaccess.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - uaccess.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * This file is based on
  * Based on: include/asm-m68knommu/uaccess.h
@@ -22,8 +22,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef __BLACKFIN_UACCESS_H
diff --git a/include/asm-blackfin/virtconvert.h b/include/asm-blackfin/virtconvert.h
index 769f5a0..9eda9f8 100644
--- a/include/asm-blackfin/virtconvert.h
+++ b/include/asm-blackfin/virtconvert.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - virtconvert.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef __BLACKFIN_VIRT_CONVERT__
@@ -33,7 +33,6 @@
 
 #include <linux/config.h>
 #include <asm/setup.h>
-#include <asm/page.h>
 
 #define mm_vtop(vaddr)		((unsigned long) vaddr)
 #define mm_ptov(vaddr)		((unsigned long) vaddr)
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index ed3ee5a..beaf385 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -91,7 +91,7 @@
 #define CONFIG_AUTOBOOT			1
 #define CONFIG_AUTOBOOT_KEYED		1
 #define CONFIG_AUTOBOOT_PROMPT				\
-        "Press SPACE to abort autoboot in %d seconds\n"
+	"Press SPACE to abort autoboot in %d seconds\n"
 #define CONFIG_AUTOBOOT_DELAY_STR	"d"
 #define CONFIG_AUTOBOOT_STOP_STR	" "
 
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index 1606d0d..7f55366 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -78,7 +78,7 @@
 #define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
 #define CONFIG_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)
 
-#define CFG_ACE_BASE		0xe0000000	/* Xilinx ACE controller - Compact Flash */
+#define CFG_ACE_BASE		0xfe000000	/* Xilinx ACE controller - Compact Flash */
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in internal SRAM)
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 5b99168..7c63095 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -10,97 +10,97 @@
 
 /* Generic MII registers. */
 
-#define MII_BMCR            0x00        /* Basic mode control register */
-#define MII_BMSR            0x01        /* Basic mode status register  */
-#define MII_PHYSID1         0x02        /* PHYS ID 1                   */
-#define MII_PHYSID2         0x03        /* PHYS ID 2                   */
-#define MII_ADVERTISE       0x04        /* Advertisement control reg   */
-#define MII_LPA             0x05        /* Link partner ability reg    */
-#define MII_EXPANSION       0x06        /* Expansion register          */
-#define MII_DCOUNTER        0x12        /* Disconnect counter          */
-#define MII_FCSCOUNTER      0x13        /* False carrier counter       */
-#define MII_NWAYTEST        0x14        /* N-way auto-neg test reg     */
-#define MII_RERRCOUNTER     0x15        /* Receive error counter       */
-#define MII_SREVISION       0x16        /* Silicon revision            */
-#define MII_RESV1           0x17        /* Reserved...                 */
-#define MII_LBRERROR        0x18        /* Lpback, rx, bypass error    */
-#define MII_PHYADDR         0x19        /* PHY address                 */
-#define MII_RESV2           0x1a        /* Reserved...                 */
-#define MII_TPISTATUS       0x1b        /* TPI status for 10mbps       */
-#define MII_NCONFIG         0x1c        /* Network interface config    */
+#define MII_BMCR	    0x00	/* Basic mode control register */
+#define MII_BMSR	    0x01	/* Basic mode status register  */
+#define MII_PHYSID1	    0x02	/* PHYS ID 1		       */
+#define MII_PHYSID2	    0x03	/* PHYS ID 2		       */
+#define MII_ADVERTISE	    0x04	/* Advertisement control reg   */
+#define MII_LPA		    0x05	/* Link partner ability reg    */
+#define MII_EXPANSION	    0x06	/* Expansion register	       */
+#define MII_DCOUNTER	    0x12	/* Disconnect counter	       */
+#define MII_FCSCOUNTER	    0x13	/* False carrier counter       */
+#define MII_NWAYTEST	    0x14	/* N-way auto-neg test reg     */
+#define MII_RERRCOUNTER     0x15	/* Receive error counter       */
+#define MII_SREVISION	    0x16	/* Silicon revision	       */
+#define MII_RESV1	    0x17	/* Reserved...		       */
+#define MII_LBRERROR	    0x18	/* Lpback, rx, bypass error    */
+#define MII_PHYADDR	    0x19	/* PHY address		       */
+#define MII_RESV2	    0x1a	/* Reserved...		       */
+#define MII_TPISTATUS	    0x1b	/* TPI status for 10mbps       */
+#define MII_NCONFIG	    0x1c	/* Network interface config    */
 
 /* Basic mode control register. */
-#define BMCR_RESV               0x003f  /* Unused...                   */
-#define BMCR_SPEED1000		0x0040  /* MSB of Speed (1000)         */
-#define BMCR_CTST               0x0080  /* Collision test              */
-#define BMCR_FULLDPLX           0x0100  /* Full duplex                 */
-#define BMCR_ANRESTART          0x0200  /* Auto negotiation restart    */
-#define BMCR_ISOLATE            0x0400  /* Disconnect DP83840 from MII */
-#define BMCR_PDOWN              0x0800  /* Powerdown the DP83840       */
-#define BMCR_ANENABLE           0x1000  /* Enable auto negotiation     */
-#define BMCR_SPEED100           0x2000  /* Select 100Mbps              */
-#define BMCR_LOOPBACK           0x4000  /* TXD loopback bits           */
-#define BMCR_RESET              0x8000  /* Reset the DP83840           */
+#define BMCR_RESV		0x003f	/* Unused...		       */
+#define BMCR_SPEED1000		0x0040	/* MSB of Speed (1000)	       */
+#define BMCR_CTST		0x0080	/* Collision test	       */
+#define BMCR_FULLDPLX		0x0100	/* Full duplex		       */
+#define BMCR_ANRESTART		0x0200	/* Auto negotiation restart    */
+#define BMCR_ISOLATE		0x0400	/* Disconnect DP83840 from MII */
+#define BMCR_PDOWN		0x0800	/* Powerdown the DP83840       */
+#define BMCR_ANENABLE		0x1000	/* Enable auto negotiation     */
+#define BMCR_SPEED100		0x2000	/* Select 100Mbps	       */
+#define BMCR_LOOPBACK		0x4000	/* TXD loopback bits	       */
+#define BMCR_RESET		0x8000	/* Reset the DP83840	       */
 
 /* Basic mode status register. */
-#define BMSR_ERCAP              0x0001  /* Ext-reg capability          */
-#define BMSR_JCD                0x0002  /* Jabber detected             */
-#define BMSR_LSTATUS            0x0004  /* Link status                 */
-#define BMSR_ANEGCAPABLE        0x0008  /* Able to do auto-negotiation */
-#define BMSR_RFAULT             0x0010  /* Remote fault detected       */
-#define BMSR_ANEGCOMPLETE       0x0020  /* Auto-negotiation complete   */
-#define BMSR_RESV               0x07c0  /* Unused...                   */
-#define BMSR_10HALF             0x0800  /* Can do 10mbps, half-duplex  */
-#define BMSR_10FULL             0x1000  /* Can do 10mbps, full-duplex  */
-#define BMSR_100HALF            0x2000  /* Can do 100mbps, half-duplex */
-#define BMSR_100FULL            0x4000  /* Can do 100mbps, full-duplex */
-#define BMSR_100BASE4           0x8000  /* Can do 100mbps, 4k packets  */
+#define BMSR_ERCAP		0x0001	/* Ext-reg capability	       */
+#define BMSR_JCD		0x0002	/* Jabber detected	       */
+#define BMSR_LSTATUS		0x0004	/* Link status		       */
+#define BMSR_ANEGCAPABLE	0x0008	/* Able to do auto-negotiation */
+#define BMSR_RFAULT		0x0010	/* Remote fault detected       */
+#define BMSR_ANEGCOMPLETE	0x0020	/* Auto-negotiation complete   */
+#define BMSR_RESV		0x07c0	/* Unused...		       */
+#define BMSR_10HALF		0x0800	/* Can do 10mbps, half-duplex  */
+#define BMSR_10FULL		0x1000	/* Can do 10mbps, full-duplex  */
+#define BMSR_100HALF		0x2000	/* Can do 100mbps, half-duplex */
+#define BMSR_100FULL		0x4000	/* Can do 100mbps, full-duplex */
+#define BMSR_100BASE4		0x8000	/* Can do 100mbps, 4k packets  */
 
 /* Advertisement control register. */
-#define ADVERTISE_SLCT          0x001f  /* Selector bits               */
-#define ADVERTISE_CSMA          0x0001  /* Only selector supported     */
-#define ADVERTISE_10HALF        0x0020  /* Try for 10mbps half-duplex  */
-#define ADVERTISE_10FULL        0x0040  /* Try for 10mbps full-duplex  */
-#define ADVERTISE_100HALF       0x0080  /* Try for 100mbps half-duplex */
-#define ADVERTISE_100FULL       0x0100  /* Try for 100mbps full-duplex */
-#define ADVERTISE_100BASE4      0x0200  /* Try for 100mbps 4k packets  */
-#define ADVERTISE_RESV          0x1c00  /* Unused...                   */
-#define ADVERTISE_RFAULT        0x2000  /* Say we can detect faults    */
-#define ADVERTISE_LPACK         0x4000  /* Ack link partners response  */
-#define ADVERTISE_NPAGE         0x8000  /* Next page bit               */
+#define ADVERTISE_SLCT		0x001f	/* Selector bits	       */
+#define ADVERTISE_CSMA		0x0001	/* Only selector supported     */
+#define ADVERTISE_10HALF	0x0020	/* Try for 10mbps half-duplex  */
+#define ADVERTISE_10FULL	0x0040	/* Try for 10mbps full-duplex  */
+#define ADVERTISE_100HALF	0x0080	/* Try for 100mbps half-duplex */
+#define ADVERTISE_100FULL	0x0100	/* Try for 100mbps full-duplex */
+#define ADVERTISE_100BASE4	0x0200	/* Try for 100mbps 4k packets  */
+#define ADVERTISE_RESV		0x1c00	/* Unused...		       */
+#define ADVERTISE_RFAULT	0x2000	/* Say we can detect faults    */
+#define ADVERTISE_LPACK		0x4000	/* Ack link partners response  */
+#define ADVERTISE_NPAGE		0x8000	/* Next page bit	       */
 
 #define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
 			ADVERTISE_CSMA)
 #define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
-                       ADVERTISE_100HALF | ADVERTISE_100FULL)
+		       ADVERTISE_100HALF | ADVERTISE_100FULL)
 
 /* Link partner ability register. */
-#define LPA_SLCT                0x001f  /* Same as advertise selector  */
-#define LPA_10HALF              0x0020  /* Can do 10mbps half-duplex   */
-#define LPA_10FULL              0x0040  /* Can do 10mbps full-duplex   */
-#define LPA_100HALF             0x0080  /* Can do 100mbps half-duplex  */
-#define LPA_100FULL             0x0100  /* Can do 100mbps full-duplex  */
-#define LPA_100BASE4            0x0200  /* Can do 100mbps 4k packets   */
-#define LPA_RESV                0x1c00  /* Unused...                   */
-#define LPA_RFAULT              0x2000  /* Link partner faulted        */
-#define LPA_LPACK               0x4000  /* Link partner acked us       */
-#define LPA_NPAGE               0x8000  /* Next page bit               */
+#define LPA_SLCT		0x001f	/* Same as advertise selector  */
+#define LPA_10HALF		0x0020	/* Can do 10mbps half-duplex   */
+#define LPA_10FULL		0x0040	/* Can do 10mbps full-duplex   */
+#define LPA_100HALF		0x0080	/* Can do 100mbps half-duplex  */
+#define LPA_100FULL		0x0100	/* Can do 100mbps full-duplex  */
+#define LPA_100BASE4		0x0200	/* Can do 100mbps 4k packets   */
+#define LPA_RESV		0x1c00	/* Unused...		       */
+#define LPA_RFAULT		0x2000	/* Link partner faulted        */
+#define LPA_LPACK		0x4000	/* Link partner acked us       */
+#define LPA_NPAGE		0x8000	/* Next page bit	       */
 
 #define LPA_DUPLEX		(LPA_10FULL | LPA_100FULL)
 #define LPA_100			(LPA_100FULL | LPA_100HALF | LPA_100BASE4)
 
 /* Expansion register for auto-negotiation. */
-#define EXPANSION_NWAY          0x0001  /* Can do N-way auto-nego      */
-#define EXPANSION_LCWP          0x0002  /* Got new RX page code word   */
-#define EXPANSION_ENABLENPAGE   0x0004  /* This enables npage words    */
-#define EXPANSION_NPCAPABLE     0x0008  /* Link partner supports npage */
-#define EXPANSION_MFAULTS       0x0010  /* Multiple faults detected    */
-#define EXPANSION_RESV          0xffe0  /* Unused...                   */
+#define EXPANSION_NWAY		0x0001	/* Can do N-way auto-nego      */
+#define EXPANSION_LCWP		0x0002	/* Got new RX page code word   */
+#define EXPANSION_ENABLENPAGE	0x0004	/* This enables npage words    */
+#define EXPANSION_NPCAPABLE	0x0008	/* Link partner supports npage */
+#define EXPANSION_MFAULTS	0x0010	/* Multiple faults detected    */
+#define EXPANSION_RESV		0xffe0	/* Unused...		       */
 
 /* N-way test register. */
-#define NWAYTEST_RESV1          0x00ff  /* Unused...                   */
-#define NWAYTEST_LOOPBACK       0x0100  /* Enable loopback for N-way   */
-#define NWAYTEST_RESV2          0xfe00  /* Unused...                   */
+#define NWAYTEST_RESV1		0x00ff	/* Unused...		       */
+#define NWAYTEST_LOOPBACK	0x0100	/* Enable loopback for N-way   */
+#define NWAYTEST_RESV2		0xfe00	/* Unused...		       */
 
 
 /**
@@ -114,7 +114,7 @@
  *
  * The one exception to IEEE 802.3u is that 100baseT4 is placed
  * between 100T-full and 100T-half.  If your phy does not support
- * 100T4 this is fine.  If your phy places 100T4 elsewhere in the
+ * 100T4 this is fine.	If your phy places 100T4 elsewhere in the
  * priority order, you will need to roll your own function.
  */
 static inline unsigned int mii_nway_result (unsigned int negotiated)
diff --git a/include/linux/stat.h b/include/linux/stat.h
index 7d6df8d..43fd53f 100644
--- a/include/linux/stat.h
+++ b/include/linux/stat.h
@@ -7,7 +7,7 @@
 extern "C" {
 #endif
 
-#define S_IFMT  00170000	/* type of file */
+#define S_IFMT	00170000	/* type of file */
 #define S_IFSOCK 0140000	/* named socket */
 #define S_IFLNK	 0120000	/* symbolic link */
 #define S_IFREG  0100000	/* regular */
@@ -49,20 +49,20 @@
 	ino_t		st_ino;		/* file id */
 	mode_t		st_mode;	/* ownership/protection */
 	nlink_t		st_nlink;	/* number of links */
-	uid_t 		st_uid;		/* user id */
-	gid_t 		st_gid;		/* group id */
+	uid_t		st_uid;		/* user id */
+	gid_t		st_gid;		/* group id */
 	dev_t		st_rdev;
 	off_t		st_size;	/* file size in # of bytes */
-	unsigned long  	st_blksize;	/* block size */
-	unsigned long  	st_blocks;	/* file size in # of blocks */
-	unsigned long  	st_atime;	/* time file was last accessed */
-	unsigned long  	__unused1;
-	unsigned long  	st_mtime;	/* time file was last modified */
-	unsigned long  	__unused2;
-	unsigned long  	st_ctime;	/* time file status was last changed */
-	unsigned long  	__unused3;
-	unsigned long  	__unused4;
-	unsigned long  	__unused5;
+	unsigned long	st_blksize;	/* block size */
+	unsigned long	st_blocks;	/* file size in # of blocks */
+	unsigned long	st_atime;	/* time file was last accessed */
+	unsigned long	__unused1;
+	unsigned long	st_mtime;	/* time file was last modified */
+	unsigned long	__unused2;
+	unsigned long	st_ctime;	/* time file status was last changed */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+	unsigned long	__unused5;
 };
 
 #endif	/* __PPC__ */
@@ -97,30 +97,30 @@
 #if defined (__MIPS__)
 
 struct stat {
-	dev_t           st_dev;
-	long            st_pad1[3];
-	ino_t           st_ino;
-	mode_t          st_mode;
-	nlink_t         st_nlink;
-	uid_t           st_uid;
-	gid_t           st_gid;
-	dev_t           st_rdev;
-	long            st_pad2[2];
-	off_t           st_size;
-	long            st_pad3;
+	dev_t		st_dev;
+	long		st_pad1[3];
+	ino_t		st_ino;
+	mode_t		st_mode;
+	nlink_t		st_nlink;
+	uid_t		st_uid;
+	gid_t		st_gid;
+	dev_t		st_rdev;
+	long		st_pad2[2];
+	off_t		st_size;
+	long		st_pad3;
 	/*
 	 * Actually this should be timestruc_t st_atime, st_mtime and st_ctime
 	 * but we don't have it under Linux.
 	 */
-	time_t          st_atime;
-	long            reserved0;
-	time_t          st_mtime;
-	long            reserved1;
-	time_t          st_ctime;
-	long            reserved2;
-	long            st_blksize;
-	long            st_blocks;
-	long            st_pad4[14];
+	time_t		st_atime;
+	long		reserved0;
+	time_t		st_mtime;
+	long		reserved1;
+	time_t		st_ctime;
+	long		reserved2;
+	long		st_blksize;
+	long		st_blocks;
+	long		st_pad4[14];
 };
 
 #endif	/* __MIPS__ */
@@ -128,24 +128,24 @@
 #if defined(__AVR32__)
 
 struct stat {
-        unsigned long st_dev;
-        unsigned long st_ino;
-        unsigned short st_mode;
-        unsigned short st_nlink;
-        unsigned short st_uid;
-        unsigned short st_gid;
-        unsigned long  st_rdev;
-        unsigned long  st_size;
-        unsigned long  st_blksize;
-        unsigned long  st_blocks;
-        unsigned long  st_atime;
-        unsigned long  st_atime_nsec;
-        unsigned long  st_mtime;
-        unsigned long  st_mtime_nsec;
-        unsigned long  st_ctime;
-        unsigned long  st_ctime_nsec;
-        unsigned long  __unused4;
-        unsigned long  __unused5;
+	unsigned long st_dev;
+	unsigned long st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned long  st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
 };
 
 #endif /* __AVR32__ */
diff --git a/include/ppc405.h b/include/ppc405.h
index 08f10d2..a2503a9 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -570,6 +570,8 @@
 #define SDR_ICTX0_STAT	0x40000000
 #define SDR_ICTX1_STAT	0x20000000
 
+#define SDR_PINSTP	0x40
+
 /******************************************************************************
  * Control
  ******************************************************************************/
diff --git a/include/ppc440.h b/include/ppc440.h
index 51e6b9b..bc1d7aa 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -148,7 +148,7 @@
 #define sdrcfgd		(SDR_DCR_BASE+0x1)
 #define sdr_sdstp0	0x0020	    /* */
 #define sdr_sdstp1	0x0021	    /* */
-#define sdr_pinstp	0x0040
+#define SDR_PINSTP	0x0040
 #define sdr_sdcs	0x0060
 #define sdr_ecid0	0x0080
 #define sdr_ecid1	0x0081
diff --git a/lib_blackfin/Makefile b/lib_blackfin/Makefile
index 3197fe1..a7aaef7 100644
--- a/lib_blackfin/Makefile
+++ b/lib_blackfin/Makefile
@@ -1,7 +1,7 @@
 #
 # U-boot Makefile
 #
-# Copyright (c) 2005 blackfin.uclinux.org
+# Copyright (c) 2005-2007 Analog Devices Inc.
 #
 # (C) Copyright 2000-2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+# MA 02110-1301 USA
 #
 
 include $(TOPDIR)/config.mk
diff --git a/lib_blackfin/bf533_linux.c b/lib_blackfin/bf533_linux.c
index 1b0d90a..3b9c4df 100644
--- a/lib_blackfin/bf533_linux.c
+++ b/lib_blackfin/bf533_linux.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - bf533_linux.c
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 /* Dummy functions, currently not in Use */
diff --git a/lib_blackfin/bf533_string.c b/lib_blackfin/bf533_string.c
index 85b1150..1553f1b 100644
--- a/lib_blackfin/bf533_string.c
+++ b/lib_blackfin/bf533_string.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - bf533_string.c Contains library routines.
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,22 +21,16 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
 #include <asm/setup.h>
-#include <asm/page.h>
 #include <config.h>
 #include <asm/blackfin.h>
 #include <asm/io.h>
-
-extern void blackfin_icache_flush_range(const void *, const void *);
-extern void blackfin_dcache_flush_range(const void *, const void *);
-extern void *memcpy_ASM(void *dest, const void *src, size_t count);
-
-void *dma_memcpy(void *, const void *, size_t);
+#include "cache.h"
 
 char *strcpy(char *dest, const char *src)
 {
@@ -118,44 +112,7 @@
 	return __res1;
 }
 
-/*
- * memcpy - Copy one area of memory to another
- * @dest: Where to copy to
- * @src: Where to copy from
- * @count: The size of the area.
- *
- * You should not use this function to access IO space, use memcpy_toio()
- * or memcpy_fromio() instead.
- */
-void *memcpy(void *dest, const void *src, size_t count)
-{
-	char *tmp = (char *)dest, *s = (char *)src;
-
-	/* L1_ISRAM can only be accessed via dma */
-	if ((tmp >= (char *)L1_ISRAM) && (tmp < (char *)L1_ISRAM_END)) {
-		/* L1 is the destination */
-		dma_memcpy(dest, src, count);
-
-		if (icache_status()) {
-			blackfin_icache_flush_range(src, src + count);
-		}
-	} else if ((s >= (char *)L1_ISRAM) && (s < (char *)L1_ISRAM_END)) {
-		/* L1 is the source */
-		dma_memcpy(dest, src, count);
-
-		if (icache_status()) {
-			blackfin_icache_flush_range(dest, dest + count);
-		}
-		if (dcache_status()) {
-			blackfin_dcache_flush_range(dest, dest + count);
-		}
-	} else {
-		memcpy_ASM(dest, src, count);
-	}
-	return dest;
-}
-
-void *dma_memcpy(void *dest, const void *src, size_t count)
+static void *dma_memcpy(void *dest, const void *src, size_t count)
 {
 	*pMDMA_D0_IRQ_STATUS = DMA_DONE | DMA_ERR;
 
@@ -189,3 +146,40 @@
 	src += count;
 	return dest;
 }
+
+/*
+ * memcpy - Copy one area of memory to another
+ * @dest: Where to copy to
+ * @src: Where to copy from
+ * @count: The size of the area.
+ *
+ * You should not use this function to access IO space, use memcpy_toio()
+ * or memcpy_fromio() instead.
+ */
+extern void *memcpy_ASM(void *dest, const void *src, size_t count);
+void *memcpy(void *dest, const void *src, size_t count)
+{
+	char *tmp = (char *) dest, *s = (char *) src;
+
+	if (dcache_status()) {
+		blackfin_dcache_flush_range(src, src+count);
+	}
+	/* L1_ISRAM can only be accessed via dma */
+	if ((tmp >= (char *)L1_ISRAM) && (tmp < (char *)L1_ISRAM_END)) {
+		/* L1 is the destination */
+		dma_memcpy(dest,src,count);
+	} else if ((s >= (char *)L1_ISRAM) && (s < (char *)L1_ISRAM_END)) {
+		/* L1 is the source */
+		dma_memcpy(dest,src,count);
+
+		if (icache_status()) {
+			blackfin_icache_flush_range(dest, dest+count);
+		}
+		if (dcache_status()) {
+			blackfin_dcache_invalidate_range(dest, dest+count);
+		}
+	} else {
+		memcpy_ASM(dest,src,count);
+	}
+	return dest;
+}
diff --git a/lib_blackfin/blackfin_board.h b/lib_blackfin/blackfin_board.h
index e0b96da..1353421 100644
--- a/lib_blackfin/blackfin_board.h
+++ b/lib_blackfin/blackfin_board.h
@@ -1,7 +1,7 @@
 /*
  * U-boot - blackfin_board.h
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef __BLACKFIN_BOARD_H__
diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c
index 1a0a282..1538da3 100644
--- a/lib_blackfin/board.c
+++ b/lib_blackfin/board.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - board.c First C file to be called contains init routines
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,8 +21,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #include <common.h>
@@ -182,7 +182,7 @@
 	icplb_table[j][1] = L1_IMEMORY;
 	j++;
 
-	for (i = 0; i <= CONFIG_MEM_SIZE / 4; i++) {
+	for (i = 0; i < CONFIG_MEM_SIZE / 4; i++) {
 		icplb_table[j][0] = (i * 4 * 1024 * 1024);
 		if (i * 4 * 1024 * 1024 <= CFG_MONITOR_BASE
 		    && (i + 1) * 4 * 1024 * 1024 >= CFG_MONITOR_BASE) {
@@ -193,14 +193,19 @@
 		j++;
 	}
 #if defined(CONFIG_BF561)
+	/* MAC space */
+	icplb_table[j][0] = 0x2C000000;
+	icplb_table[j][1] = SDRAM_INON_CHBL;
+	j++;
 	/* Async Memory space */
 	for (i = 0; i < 3; i++) {
-		icplb_table[j++][0] = 0x20000000 + i * 4 * 1024 * 1024;
-		icplb_table[j++][1] = SDRAM_IGENERIC;
+		icplb_table[j][0] = 0x20000000 + i * 4 * 1024 * 1024;
+		icplb_table[j][1] = SDRAM_INON_CHBL;
+		j++;
 	}
 #else
 	icplb_table[j][0] = 0x20000000;
-	icplb_table[j][1] = SDRAM_IGENERIC;
+	icplb_table[j][1] = SDRAM_INON_CHBL;
 #endif
 	j = 0;
 	dcplb_table[j][0] = 0xFF800000;
@@ -220,13 +225,15 @@
 
 #if defined(CONFIG_BF561)
 	/* MAC space */
-	dcplb_table[j++][0] = CONFIG_ASYNC_EBIU_BASE;
-	dcplb_table[j++][1] = SDRAM_EBIU;
+	dcplb_table[j][0] = 0x2C000000;
+	dcplb_table[j][1] = SDRAM_EBIU;
+	j++;
 
 	/* Flash space */
-	for (i = 0; i < 2; i++) {
-		dcplb_table[j++][0] = 0x20000000 + i * 4 * 1024 * 1024;
-		dcplb_table[j++][1] = SDRAM_EBIU;
+	for (i = 0; i < 3; i++) {
+		dcplb_table[j][0] = 0x20000000 + i * 4 * 1024 * 1024;
+		dcplb_table[j][1] = SDRAM_EBIU;
+		j++;
 	}
 #else
 	dcplb_table[j][0] = 0x20000000;
diff --git a/lib_blackfin/cache.c b/lib_blackfin/cache.c
index a15914b..9d71bcb 100644
--- a/lib_blackfin/cache.c
+++ b/lib_blackfin/cache.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - cache.c
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,17 +21,15 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 /* for now: just dummy functions to satisfy the linker */
 #include <config.h>
 #include <common.h>
 #include <asm/blackfin.h>
-
-extern void blackfin_icache_flush_range(unsigned long, unsigned long);
-extern void blackfin_dcache_flush_range(unsigned long, unsigned long);
+#include "cache.h"
 
 void flush_cache(unsigned long dummy1, unsigned long dummy2)
 {
@@ -43,9 +41,9 @@
 		return;
 
 	if (icache_status())
-		blackfin_icache_flush_range(dummy1, dummy1 + dummy2);
+		blackfin_icache_flush_range((void*)dummy1, (void*)(dummy1 + dummy2));
 	if (dcache_status())
-		blackfin_dcache_flush_range(dummy1, dummy1 + dummy2);
+		blackfin_dcache_flush_range((void*)dummy1, (void*)(dummy1 + dummy2));
 
 	return;
 }
diff --git a/lib_blackfin/cache.h b/lib_blackfin/cache.h
new file mode 100644
index 0000000..3ea6809
--- /dev/null
+++ b/lib_blackfin/cache.h
@@ -0,0 +1,35 @@
+/*
+ * U-boot - prototypes for cache handling functions.
+ *
+ * Copyright (c) 2005-2007 Analog Devices Inc.
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef _LIB_BLACKFIN_CACHE_H_
+#define _LIB_BLACKFIN_CACHE_H_
+
+extern void blackfin_icache_flush_range(const void *, const void *);
+extern void blackfin_dcache_flush_range(const void *, const void *);
+extern void blackfin_dcache_invalidate_range(const void *, const void *);
+
+#endif
diff --git a/lib_blackfin/memcmp.S b/lib_blackfin/memcmp.S
index fcea5b3..9b58832 100644
--- a/lib_blackfin/memcmp.S
+++ b/lib_blackfin/memcmp.S
@@ -1,17 +1,8 @@
 /*
- * File:         arch/blackfin/lib/memcmp.S
- * Based on:
- * Author:
+ * File: memcmp.S
  *
- * Created:
- * Description:
- *
- * Rev:          $Id: memcmp.S 2386 2006-11-01 04:57:26Z magicyang $
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ * Copyright 2004-2007 Analog Devices Inc.
+ * Enter bugs at http://blackfin.uclinux.org/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/lib_blackfin/memcpy.S b/lib_blackfin/memcpy.S
index a73ff90..24577be 100644
--- a/lib_blackfin/memcpy.S
+++ b/lib_blackfin/memcpy.S
@@ -1,22 +1,8 @@
 /*
- * File:         arch/blackfin/lib/memcpy.S
- * Based on:
- * Author:
+ * File: memcpy.S
  *
- * Created:
- * Description:  internal version of memcpy(), issued by the compiler
- *               to copy blocks of data around.
- *               This is really memmove() - it has to be able to deal with
- *               possible overlaps, because that ambiguity is when the compiler
- *               gives up and calls a function. We have our own, internal version
- *               so that we get something we trust, even if the user has redefined
- *               the normal symbol.
- * Rev:          $Id: memcpy.S 2775 2007-02-21 13:58:44Z hennerich $
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ * Copyright 2004-2007 Analog Devices Inc.
+ * Enter bugs at http://blackfin.uclinux.org/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -33,6 +19,7 @@
  * to the Free Software Foundation, Inc.,
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
+
 .align 2
 
 .globl _memcpy_ASM;
diff --git a/lib_blackfin/memmove.S b/lib_blackfin/memmove.S
index 79558f9..46f79ed 100644
--- a/lib_blackfin/memmove.S
+++ b/lib_blackfin/memmove.S
@@ -1,17 +1,8 @@
 /*
- * File:         arch/blackfin/lib/memmove.S
- * Based on:
- * Author:
+ * File: memmove.S
  *
- * Created:
- * Description:
- *
- * Rev:          $Id: memmove.S 2205 2006-09-23 07:53:49Z vapier $
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ * Copyright 2004-2007 Analog Devices Inc.
+ * Enter bugs at http://blackfin.uclinux.org/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/lib_blackfin/memset.S b/lib_blackfin/memset.S
index 7e6ee19..c33c551 100644
--- a/lib_blackfin/memset.S
+++ b/lib_blackfin/memset.S
@@ -1,17 +1,8 @@
 /*
- * File:         arch/blackfin/lib/memset.S
- * Based on:
- * Author:
+ * File: memset.S
  *
- * Created:
- * Description:
- *
- * Rev:          $Id: memset.S 2769 2007-02-19 16:45:53Z hennerich $
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ * Copyright 2004-2007 Analog Devices Inc.
+ * Enter bugs at http://blackfin.uclinux.org/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -29,7 +20,6 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-
 .align 2
 
 /*
diff --git a/lib_blackfin/muldi3.c b/lib_blackfin/muldi3.c
index da55711..bf1ca53 100644
--- a/lib_blackfin/muldi3.c
+++ b/lib_blackfin/muldi3.c
@@ -1,7 +1,7 @@
 /*
  * U-boot - muldi3.c contains routines for mult and div
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,8 +18,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 /* Generic function got from GNU gcc package, libgcc2.c */
diff --git a/net/eth.c b/net/eth.c
index 6a34425..b3e281f 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -55,6 +55,7 @@
 extern int tsec_initialize(bd_t*, int, char *);
 extern int npe_initialize(bd_t *);
 extern int uec_initialize(int);
+extern int bfin_EMAC_initialize(bd_t *);
 extern int atstk1000_eth_initialize(bd_t *);
 
 static struct eth_device *eth_devices, *eth_current;
@@ -256,6 +257,9 @@
 #if defined(CONFIG_RTL8169)
 	rtl8169_initialize(bis);
 #endif
+#if defined(CONFIG_BF537)
+	bfin_EMAC_initialize(bis);
+#endif
 #if defined(CONFIG_ATSTK1000)
 	atstk1000_eth_initialize(bis);
 #endif