diff --git a/lib_mips/Makefile b/lib_mips/Makefile
new file mode 100644
index 0000000..540383d
--- /dev/null
+++ b/lib_mips/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(ARCH).a
+
+AOBJS	= 
+
+COBJS	= board.o time.o mips_linux.o
+
+OBJS	= $(AOBJS) $(COBJS)
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/lib_mips/board.c b/lib_mips/board.c
new file mode 100644
index 0000000..81909d3
--- /dev/null
+++ b/lib_mips/board.c
@@ -0,0 +1,403 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <devices.h>
+#include <syscall.h>
+#include <version.h>
+#include <net.h>
+#include <environment.h>
+
+#if ( ((CFG_ENV_ADDR+CFG_ENV_SIZE) < CFG_MONITOR_BASE) || \
+      (CFG_ENV_ADDR >= (CFG_MONITOR_BASE + CFG_MONITOR_LEN)) ) || \
+    defined(CFG_ENV_IS_IN_NVRAM)
+#define	TOTAL_MALLOC_LEN	(CFG_MALLOC_LEN + CFG_ENV_SIZE)
+#else
+#define	TOTAL_MALLOC_LEN	CFG_MALLOC_LEN
+#endif
+
+#undef DEBUG
+
+extern int timer_init(void);
+
+const char version_string[] =
+	U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")";
+
+static char *failed = "*** failed ***\n";
+
+/*
+ * Begin and End of memory area for malloc(), and current "brk"
+ */
+static ulong mem_malloc_start;
+static ulong mem_malloc_end;
+static ulong mem_malloc_brk;
+
+
+/*
+ * The Malloc area is immediately below the monitor copy in DRAM
+ */
+static void mem_malloc_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	ulong dest_addr = CFG_MONITOR_BASE + gd->reloc_off;
+
+	mem_malloc_end = dest_addr;
+	mem_malloc_start = dest_addr - TOTAL_MALLOC_LEN;
+	mem_malloc_brk = mem_malloc_start;
+
+	memset ((void *) mem_malloc_start,
+		0,
+		mem_malloc_end - mem_malloc_start);
+}
+
+void *sbrk (ptrdiff_t increment)
+{
+	ulong old = mem_malloc_brk;
+	ulong new = old + increment;
+
+	if ((new < mem_malloc_start) || (new > mem_malloc_end)) {
+		return (NULL);
+	}
+	mem_malloc_brk = new;
+	return ((void *) old);
+}
+
+
+static int init_func_ram (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef	CONFIG_BOARD_TYPES
+	int board_type = gd->board_type;
+#else
+	int board_type = 0;	/* use dummy arg */
+#endif
+	puts ("DRAM:  ");
+
+	if ((gd->ram_size = initdram (board_type)) > 0) {
+		print_size (gd->ram_size, "\n");
+		return (0);
+	}
+	puts (failed);
+	return (1);
+}
+
+static int display_banner(void)
+{
+
+	printf ("\n\n%s\n\n", version_string);
+	return (0);
+}
+
+static void display_flash_config(ulong size)
+{
+	puts ("Flash: ");
+	print_size (size, "\n");
+}
+
+
+static int init_baudrate (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	uchar tmp[64];	/* long enough for environment variables */
+	int i = getenv_r ("baudrate", tmp, sizeof (tmp));
+
+	gd->baudrate = (i > 0)
+			? (int) simple_strtoul (tmp, NULL, 10)
+			: CONFIG_BAUDRATE;
+
+	return (0);
+}
+
+
+/*
+ * Breath some life into the board...
+ *
+ * The first part of initialization is running from Flash memory;
+ * its main purpose is to initialize the RAM so that we
+ * can relocate the monitor code to RAM.
+ */
+
+/*
+ * All attempts to come up with a "common" initialization sequence
+ * that works for all boards and architectures failed: some of the
+ * requirements are just _too_ different. To get rid of the resulting
+ * mess of board dependend #ifdef'ed code we now make the whole
+ * initialization sequence configurable to the user.
+ *
+ * The requirements for any new initalization function is simple: it
+ * receives a pointer to the "global data" structure as it's only
+ * argument, and returns an integer return code, where 0 means
+ * "continue" and != 0 means "fatal error, hang the system".
+ */
+typedef int (init_fnc_t) (void);
+
+init_fnc_t *init_sequence[] = {
+	timer_init,
+	env_init,		/* initialize environment */
+	init_baudrate,		/* initialze baudrate settings */
+	serial_init,		/* serial communications setup */
+	console_init_f,
+	display_banner,		/* say that we are here */
+	init_func_ram,
+	NULL,
+};
+
+
+void board_init_f(ulong bootflag)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd_t gd_data, *id;
+	bd_t *bd;
+	init_fnc_t **init_fnc_ptr;
+	ulong addr, addr_sp, len   = CFG_MONITOR_LEN;
+
+		/* Pointer is writable since we allocated a register for it.
+		 */
+	gd = &gd_data;
+	memset (gd, 0, sizeof (gd_t));
+
+	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
+		if ((*init_fnc_ptr)() != 0) {
+			hang ();
+		}
+	}
+
+	/*
+	 * Now that we have DRAM mapped and working, we can
+	 * relocate the code and continue running from DRAM.
+	 */
+	addr = CFG_SDRAM_BASE + gd->ram_size;
+
+		/* We can reserve some RAM "on top" here.
+		 */
+
+		/* round down to next 4 kB limit.
+		 */
+	addr &= ~(4096 - 1);
+#ifdef DEBUG
+	printf ("Top of RAM usable for U-Boot at: %08lx\n", addr);
+#endif
+	 
+		/* Reserve memory for U-Boot code, data & bss
+		 * round down to next 4 kB limit
+		 */
+	addr -= len;
+	addr &= ~(4096 - 1);
+
+#ifdef DEBUG
+	printf ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
+#endif
+
+	 	/* Reserve memory for malloc() arena.
+		 */
+	addr_sp = addr - TOTAL_MALLOC_LEN;
+#ifdef DEBUG
+	printf ("Reserving %dk for malloc() at: %08lx\n",
+			TOTAL_MALLOC_LEN >> 10, addr_sp);
+#endif
+
+	/*
+	 * (permanently) allocate a Board Info struct
+	 * and a permanent copy of the "global" data
+	 */
+	addr_sp -= sizeof(bd_t);
+	bd = (bd_t *)addr_sp;
+	gd->bd = bd;
+#ifdef DEBUG
+	printf ("Reserving %d Bytes for Board Info at: %08lx\n",
+			sizeof(bd_t), addr_sp);
+#endif
+	addr_sp -= sizeof(gd_t);
+	id = (gd_t *)addr_sp;
+#ifdef DEBUG
+	printf ("Reserving %d Bytes for Global Data at: %08lx\n",
+			sizeof (gd_t), addr_sp);
+#endif
+
+	 	/* Reserve memory for boot params.
+		 */
+	addr_sp -= CFG_BOOTPARAMS_LEN;
+	bd->bi_boot_params = addr_sp;
+#ifdef DEBUG
+	printf ("Reserving %dk for malloc() at: %08lx\n",
+			CFG_BOOTPARAMS_LEN >> 10, addr_sp);
+#endif
+
+	/*
+	 * Finally, we set up a new (bigger) stack.
+	 *
+	 * Leave some safety gap for SP, force alignment on 16 byte boundary
+	 * Clear initial stack frame
+	 */
+	addr_sp -= 16;
+	addr_sp &= ~0xF;
+	*((ulong *) addr_sp)-- = 0;
+	*((ulong *) addr_sp)-- = 0;
+#ifdef DEBUG
+	printf ("Stack Pointer at: %08lx\n", addr_sp);
+#endif
+	/*
+	 * Save local variables to board info struct
+	 */
+	bd->bi_memstart	= CFG_SDRAM_BASE;	/* start of  DRAM memory */
+	bd->bi_memsize	= gd->ram_size;		/* size  of  DRAM memory in bytes */
+	bd->bi_baudrate	= gd->baudrate;		/* Console Baudrate */
+
+	memcpy (id, gd, sizeof (gd_t));
+	relocate_code (addr_sp, id, addr);
+
+	/* NOTREACHED - relocate_code() does not return */
+}
+/************************************************************************
+ *
+ * This is the next part if the initialization sequence: we are now
+ * running from RAM and have a "normal" C environment, i. e. global
+ * data can be written, BSS has been cleared, the stack size in not
+ * that critical any more, etc.
+ *
+ ************************************************************************
+ */
+
+void board_init_r (gd_t *id, ulong dest_addr)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	cmd_tbl_t *cmdtp;
+	ulong size;
+	extern void malloc_bin_reloc (void);
+#ifndef CFG_ENV_IS_NOWHERE
+	extern char * env_name_spec;
+#endif
+	char *s, *e;
+	bd_t *bd;
+	int i;
+
+	gd = id;
+	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
+
+#ifdef DEBUG
+	printf ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
+#endif
+
+	gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
+
+	/*
+	 * We have to relocate the command table manually
+	 */
+	for (cmdtp = &cmd_tbl[0]; cmdtp->name; cmdtp++) {
+		ulong addr;
+
+		addr = (ulong) (cmdtp->cmd) + gd->reloc_off;
+#if 0
+		printf ("Command \"%s\": 0x%08lx => 0x%08lx\n",
+				cmdtp->name, (ulong) (cmdtp->cmd), addr);
+#endif
+		cmdtp->cmd =
+			(int (*)(struct cmd_tbl_s *, int, int, char *[]))addr;
+
+		addr = (ulong)(cmdtp->name) + gd->reloc_off;
+		cmdtp->name = (char *)addr;
+
+		if (cmdtp->usage) {
+			addr = (ulong)(cmdtp->usage) + gd->reloc_off;
+			cmdtp->usage = (char *)addr;
+		}
+#ifdef	CFG_LONGHELP
+		if (cmdtp->help) {
+			addr = (ulong)(cmdtp->help) + gd->reloc_off;
+			cmdtp->help = (char *)addr;
+		}
+#endif
+	}
+	/* there are some other pointer constants we must deal with */
+#ifndef CFG_ENV_IS_NOWHERE
+	env_name_spec += gd->reloc_off;
+#endif
+	
+	/* configure available FLASH banks */
+	size = flash_init();
+	display_flash_config (size);
+
+	bd = gd->bd;
+	bd->bi_flashstart = CFG_FLASH_BASE;
+	bd->bi_flashsize = size;
+#if CFG_MONITOR_BASE == CFG_FLASH_BASE
+	bd->bi_flashoffset = CFG_MONITOR_LEN;	/* reserved area for U-Boot */
+#else
+	bd->bi_flashoffset = 0;
+#endif
+
+	/* initialize malloc() area */
+	mem_malloc_init();
+	malloc_bin_reloc();
+
+	/* relocate environment function pointers etc. */
+	env_relocate();
+
+	/* board MAC address */
+	s = getenv ("ethaddr");
+	for (i = 0; i < 6; ++i) {
+		bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+		if (s)
+			s = (*e) ? e + 1 : e;
+	}
+
+	/* IP Address */
+	bd->bi_ip_addr = getenv_IPaddr("ipaddr");
+
+/** leave this here (after malloc(), environment and PCI are working) **/
+	/* Initialize devices */
+	devices_init ();
+
+	/* allocate syscalls table (console_init_r will fill it in */
+	syscall_tbl = (void **) malloc (NR_SYSCALLS * sizeof (void *));
+
+	/* Initialize the console (after the relocation and devices init) */
+	console_init_r ();
+/** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **/
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
+	puts ("Net:   ");
+	eth_initialize(gd->bd);
+#endif
+
+	/* main_loop() can return to retry autoboot, if so just run it again. */
+	for (;;) {
+		main_loop ();
+	}
+
+	/* NOTREACHED - no way out of command loop except booting */
+}
+
+void hang (void)
+{
+	puts ("### ERROR ### Please RESET the board ###\n");
+	for (;;);
+}
+
diff --git a/lib_mips/mips_linux.c b/lib_mips/mips_linux.c
new file mode 100644
index 0000000..e73d4d8
--- /dev/null
+++ b/lib_mips/mips_linux.c
@@ -0,0 +1,276 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cmd_boot.h>
+#include <image.h>
+#include <zlib.h>
+#include <asm/byteorder.h>
+#include <asm/addrspace.h>
+
+#define	LINUX_MAX_ENVS		256
+#define	LINUX_MAX_ARGS		256
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+# include <status_led.h>
+# define SHOW_BOOT_PROGRESS(arg)	show_boot_progress(arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
+
+extern image_header_t header;           /* from cmd_bootm.c */
+
+static int	linux_argc;
+static char **	linux_argv;
+
+static char **	linux_env;
+static char *	linux_env_p;
+static int	linux_env_idx;
+
+static void linux_params_init (ulong start, char * commandline);
+static void linux_env_set (char * env_name, char * env_val);
+
+
+void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
+		ulong addr, ulong *len_ptr, int   verify)
+{
+    DECLARE_GLOBAL_DATA_PTR;
+
+    ulong len = 0, checksum;
+    ulong initrd_start, initrd_end;
+    ulong data;
+    void (*theKernel)(int, char **, char **, int *);
+    image_header_t *hdr = &header;
+    char *commandline = getenv("bootargs");
+    char env_buf[12];
+
+    theKernel = (void (*)(int, char **, char **, int *))ntohl(hdr->ih_ep);
+
+    /*
+     * Check if there is an initrd image
+     */
+    if (argc >= 3) {
+	SHOW_BOOT_PROGRESS (9);
+
+	addr = simple_strtoul(argv[2], NULL, 16);
+
+	printf ("## Loading Ramdisk Image at %08lx ...\n", addr);
+
+	/* Copy header so we can blank CRC field for re-calculation */
+	memcpy (&header, (char *)addr, sizeof(image_header_t));
+
+	if (ntohl(hdr->ih_magic) != IH_MAGIC) {
+	    printf ("Bad Magic Number\n");
+	    SHOW_BOOT_PROGRESS (-10);
+	    do_reset (cmdtp, flag, argc, argv);
+	}
+
+	data = (ulong)&header;
+	len  = sizeof(image_header_t);
+
+	checksum = ntohl(hdr->ih_hcrc);
+	hdr->ih_hcrc = 0;
+
+	if (crc32 (0, (char *)data, len) != checksum) {
+	    printf ("Bad Header Checksum\n");
+	    SHOW_BOOT_PROGRESS (-11);
+	    do_reset (cmdtp, flag, argc, argv);
+	}
+
+	SHOW_BOOT_PROGRESS (10);
+
+	print_image_hdr (hdr);
+
+	data = addr + sizeof(image_header_t);
+	len  = ntohl(hdr->ih_size);
+
+	if (verify) {
+	    ulong csum = 0;
+
+	    printf ("   Verifying Checksum ... ");
+	    csum = crc32 (0, (char *)data, len);
+	    if (csum != ntohl(hdr->ih_dcrc)) {
+		printf ("Bad Data CRC\n");
+	        SHOW_BOOT_PROGRESS (-12);
+		do_reset (cmdtp, flag, argc, argv);
+	    }
+	    printf ("OK\n");
+	}
+
+	SHOW_BOOT_PROGRESS (11);
+
+	if ((hdr->ih_os   != IH_OS_LINUX)	||
+	    (hdr->ih_arch != IH_CPU_MIPS)	||
+	    (hdr->ih_type != IH_TYPE_RAMDISK)	) {
+	    printf ("No Linux MIPS Ramdisk Image\n");
+	    SHOW_BOOT_PROGRESS (-13);
+	    do_reset (cmdtp, flag, argc, argv);
+	}
+
+	/*
+	 * Now check if we have a multifile image
+	 */
+    } else if ((hdr->ih_type==IH_TYPE_MULTI) && (len_ptr[1])) {
+	ulong tail    = ntohl(len_ptr[0]) % 4;
+	int i;
+
+	SHOW_BOOT_PROGRESS (13);
+
+	/* skip kernel length and terminator */
+	data = (ulong)(&len_ptr[2]);
+	/* skip any additional image length fields */
+	for (i=1; len_ptr[i]; ++i)
+	  data += 4;
+	/* add kernel length, and align */
+	data += ntohl(len_ptr[0]);
+	if (tail) {
+	    data += 4 - tail;
+	}
+
+	len   = ntohl(len_ptr[1]);
+
+    } else {
+	/*
+	 * no initrd image
+	 */
+        SHOW_BOOT_PROGRESS (14);
+
+	data = 0;
+    }
+
+#ifdef	DEBUG
+    if (!data) {
+	printf ("No initrd\n");
+    }
+#endif
+
+    if (data) {
+	initrd_start = data;
+	initrd_end   = initrd_start + len;
+    } else {
+	initrd_start = 0;
+	initrd_end = 0;
+    }
+
+    SHOW_BOOT_PROGRESS (15);
+
+#ifdef DEBUG
+    printf ("## Transferring control to Linux (at address %08lx) ...\n",
+	    (ulong)theKernel);
+#endif
+
+    linux_params_init (PHYSADDR(gd->bd->bi_boot_params), commandline);
+
+    sprintf (env_buf, "%lu", gd->ram_size >> 20);
+    linux_env_set ("memsize", env_buf);
+
+    sprintf (env_buf, "0x%08X", (uint)PHYSADDR(initrd_start));
+    linux_env_set ("initrd_start", env_buf);
+
+    sprintf (env_buf, "0x%X", (uint)(initrd_end - initrd_start));
+    linux_env_set ("initrd_size", env_buf);
+
+    sprintf (env_buf, "0x%08X", (uint)(gd->bd->bi_flashstart));
+    linux_env_set ("flash_start", env_buf);
+
+    sprintf (env_buf, "0x%X", (uint)(gd->bd->bi_flashsize));
+    linux_env_set ("flash_size", env_buf);
+
+    /* we assume that the kernel is in place */
+    printf("\nStarting kernel ...\n\n");
+
+    theKernel(linux_argc, linux_argv, linux_env, 0);
+}
+
+static void linux_params_init (ulong start, char * line)
+{
+    char * next, * quote, * argp;
+
+    linux_argc = 1;
+    linux_argv = (char **) start;
+    linux_argv[0] = 0;
+    argp = (char *)(linux_argv + LINUX_MAX_ARGS);
+
+    next = line;
+
+    while (line && *line && linux_argc < LINUX_MAX_ARGS)
+    {
+	quote = strchr (line, '"');
+	next = strchr (line, ' ');
+
+        while (next != NULL && quote != NULL && quote < next)
+	{
+	    /* we found a left quote before the next blank
+             * now we have to find the matching right quote
+             */
+            next = strchr (quote + 1, '"');
+            if (next != NULL)
+	    {
+                quote = strchr (next + 1, '"');
+                next = strchr (next + 1, ' ');
+            }
+        }
+	
+	if (next == NULL)
+	{
+	    next = line + strlen (line);
+	}
+
+	linux_argv [linux_argc] = argp;
+	memcpy (argp, line, next - line);
+	argp [next - line] = 0;
+
+	argp += next - line + 1;
+	linux_argc ++;
+        
+	if (*next) next ++;
+	
+	line = next;
+    }
+
+    linux_env = (char **)(((ulong)argp + 15) & ~15);
+    linux_env [0] = 0;
+    linux_env_p = (char *)(linux_env + LINUX_MAX_ENVS);
+    linux_env_idx = 0;
+}
+
+static void linux_env_set (char * env_name, char * env_val)
+{
+    if (linux_env_idx < LINUX_MAX_ENVS - 1)
+    {
+	linux_env [linux_env_idx] = linux_env_p;
+
+	strcpy (linux_env_p, env_name);
+	linux_env_p += strlen (env_name);
+
+	strcpy (linux_env_p, "=");
+	linux_env_p += 1;
+
+	strcpy (linux_env_p, env_val);
+	linux_env_p += strlen (env_val);
+	
+	linux_env_p ++;
+	linux_env [++ linux_env_idx] = 0;
+    }
+}
diff --git a/lib_mips/time.c b/lib_mips/time.c
new file mode 100644
index 0000000..9e6138d
--- /dev/null
+++ b/lib_mips/time.c
@@ -0,0 +1,103 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+
+static inline void mips_compare_set(u32 v)
+{
+	asm volatile ("mtc0 %0, $11" : : "r" (v));
+}
+
+static inline void mips_count_set(u32 v)
+{
+	asm volatile ("mtc0 %0, $9" : : "r" (v));
+}
+
+
+static inline u32 mips_count_get(void)
+{
+	u32 count;
+
+	asm volatile ("mfc0 %0, $9" : "=r" (count) :);
+	return count;
+}
+
+/*
+ * timer without interrupts
+ */
+
+int timer_init(void)
+{
+	mips_compare_set(0);
+	mips_count_set(0);
+
+	return 0;
+}
+
+void reset_timer(void)
+{
+	mips_count_set(0);
+}
+
+ulong get_timer(ulong base)
+{
+	return mips_count_get() - base;
+}
+
+void set_timer(ulong t)
+{
+	mips_count_set(t);
+}
+
+void udelay (unsigned long usec)
+{
+	ulong tmo;
+	ulong start = get_timer(0);
+
+	tmo = usec * CFG_HZ / 1000;
+	tmo /= 1000;
+
+	while ((ulong)((mips_count_get() - start)) < tmo)
+		/*NOP*/;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On MIPS it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return mips_count_get();
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On MIPS it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return CFG_HZ;
+}
+
+