// ----------------------------------------------------------------------
// This file is automatically generated from the script:
//
// ./create_headers_from_register_map_h.pl
//
// and was applied to the file
//
// ./register_map.h
//
// DO NOT EDIT!!!!!
// ----------------------------------------------------------------------
//
#ifdef REGISTER_H
#else
#define REGISTER_H


// ----------------------------------------------------------------------
// This file is automatically generated from the script:
//
// ./create_headers_from_dos_params_h.pl
//
// and was applied to the file
//
// ./dos_param.h
//
// DO NOT EDIT!!!!!
// ----------------------------------------------------------------------
//
#ifdef DOS_REGISTER_H
#else
#define DOS_REGISTER_H


//
// Reading file:  ./dos_param.h
//
//------------------------------------------------------------------------------
// Define all modules' base address under DOS
// APB allocation from 32'hd0050000
//------------------------------------------------------------------------------
// Define base address for VDEC module under DOS:
//  DOS_VDEC_ASSIST_BASE_ADDR       14'h0000
//  DOS_VDEC_MDEC_BASE_ADDR         14'h0900
//  DOS_VDEC_VLD_BASE_ADDR          14'h0c00
//  DOS_VDEC_IQIDCT_BASE_ADDR       14'h0e00
//  DOS_VDEC_VCPU_BASE_ADDR         14'h0300
//  DOS_VDEC_RESERVED_BASE_ADDR     14'h0f00 // Do not use this offset
// Define base address for DOS top-level register module:
//  DOS_TOP_BASE_ADDR               14'h3f00
//------------------------------------------------------------------------------
// VDEC_ASSIST module level register offset
//------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  DOS_VDEC_ASSIST_CBUS_BASE = 0x00
// -----------------------------------------------
#define VDEC_ASSIST_MMC_CTRL0                      ((0x0001  << 2) + 0xff620000)
#define VDEC_ASSIST_MMC_CTRL1                      ((0x0002  << 2) + 0xff620000)
#define VDEC_ASSIST_MMC_CTRL2                      ((0x0003  << 2) + 0xff620000)
#define VDEC_ASSIST_MMC_CTRL3                      ((0x0004  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR1_INT0                      ((0x0025  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR1_INT1                      ((0x0026  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR1_INT2                      ((0x0027  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR1_INT3                      ((0x0028  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR1_INT4                      ((0x0029  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR1_INT5                      ((0x002a  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR1_INT6                      ((0x002b  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR1_INT7                      ((0x002c  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR1_INT8                      ((0x002d  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR1_INT9                      ((0x002e  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR1_INTA                      ((0x002f  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR1_INTB                      ((0x0030  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR1_INTC                      ((0x0031  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR1_INTD                      ((0x0032  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR1_INTE                      ((0x0033  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR1_INTF                      ((0x0034  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR2_INT0                      ((0x0035  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR2_INT1                      ((0x0036  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR2_INT2                      ((0x0037  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR2_INT3                      ((0x0038  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR2_INT4                      ((0x0039  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR2_INT5                      ((0x003a  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR2_INT6                      ((0x003b  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR2_INT7                      ((0x003c  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR2_INT8                      ((0x003d  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR2_INT9                      ((0x003e  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR2_INTA                      ((0x003f  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR2_INTB                      ((0x0040  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR2_INTC                      ((0x0041  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR2_INTD                      ((0x0042  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR2_INTE                      ((0x0043  << 2) + 0xff620000)
#define VDEC_ASSIST_AMR2_INTF                      ((0x0044  << 2) + 0xff620000)
#define VDEC_ASSIST_MBX_SSEL                       ((0x0045  << 2) + 0xff620000)
#define VDEC_ASSIST_TIMER0_LO                      ((0x0060  << 2) + 0xff620000)
#define VDEC_ASSIST_TIMER0_HI                      ((0x0061  << 2) + 0xff620000)
#define VDEC_ASSIST_TIMER1_LO                      ((0x0062  << 2) + 0xff620000)
#define VDEC_ASSIST_TIMER1_HI                      ((0x0063  << 2) + 0xff620000)
#define VDEC_ASSIST_DMA_INT                        ((0x0064  << 2) + 0xff620000)
#define VDEC_ASSIST_DMA_INT_MSK                    ((0x0065  << 2) + 0xff620000)
#define VDEC_ASSIST_DMA_INT2                       ((0x0066  << 2) + 0xff620000)
#define VDEC_ASSIST_DMA_INT_MSK2                   ((0x0067  << 2) + 0xff620000)
#define VDEC_ASSIST_MBOX0_IRQ_REG                  ((0x0070  << 2) + 0xff620000)
#define VDEC_ASSIST_MBOX0_CLR_REG                  ((0x0071  << 2) + 0xff620000)
#define VDEC_ASSIST_MBOX0_MASK                     ((0x0072  << 2) + 0xff620000)
#define VDEC_ASSIST_MBOX0_FIQ_SEL                  ((0x0073  << 2) + 0xff620000)
#define VDEC_ASSIST_MBOX1_IRQ_REG                  ((0x0074  << 2) + 0xff620000)
#define VDEC_ASSIST_MBOX1_CLR_REG                  ((0x0075  << 2) + 0xff620000)
#define VDEC_ASSIST_MBOX1_MASK                     ((0x0076  << 2) + 0xff620000)
#define VDEC_ASSIST_MBOX1_FIQ_SEL                  ((0x0077  << 2) + 0xff620000)
#define VDEC_ASSIST_MBOX2_IRQ_REG                  ((0x0078  << 2) + 0xff620000)
#define VDEC_ASSIST_MBOX2_CLR_REG                  ((0x0079  << 2) + 0xff620000)
#define VDEC_ASSIST_MBOX2_MASK                     ((0x007a  << 2) + 0xff620000)
#define VDEC_ASSIST_MBOX2_FIQ_SEL                  ((0x007b  << 2) + 0xff620000)
//------------------------------------------------------------------------------
// VDEC2_ASSIST module level register offset
//------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  DOS_VDEC2_ASSIST_CBUS_BASE = 0x00
// -----------------------------------------------
#define VDEC2_ASSIST_MMC_CTRL0                     ((0x2001  << 2) + 0xff620000)
#define VDEC2_ASSIST_MMC_CTRL1                     ((0x2002  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR1_INT0                     ((0x2025  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR1_INT1                     ((0x2026  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR1_INT2                     ((0x2027  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR1_INT3                     ((0x2028  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR1_INT4                     ((0x2029  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR1_INT5                     ((0x202a  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR1_INT6                     ((0x202b  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR1_INT7                     ((0x202c  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR1_INT8                     ((0x202d  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR1_INT9                     ((0x202e  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR1_INTA                     ((0x202f  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR1_INTB                     ((0x2030  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR1_INTC                     ((0x2031  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR1_INTD                     ((0x2032  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR1_INTE                     ((0x2033  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR1_INTF                     ((0x2034  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR2_INT0                     ((0x2035  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR2_INT1                     ((0x2036  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR2_INT2                     ((0x2037  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR2_INT3                     ((0x2038  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR2_INT4                     ((0x2039  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR2_INT5                     ((0x203a  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR2_INT6                     ((0x203b  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR2_INT7                     ((0x203c  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR2_INT8                     ((0x203d  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR2_INT9                     ((0x203e  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR2_INTA                     ((0x203f  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR2_INTB                     ((0x2040  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR2_INTC                     ((0x2041  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR2_INTD                     ((0x2042  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR2_INTE                     ((0x2043  << 2) + 0xff620000)
#define VDEC2_ASSIST_AMR2_INTF                     ((0x2044  << 2) + 0xff620000)
#define VDEC2_ASSIST_MBX_SSEL                      ((0x2045  << 2) + 0xff620000)
#define VDEC2_ASSIST_TIMER0_LO                     ((0x2060  << 2) + 0xff620000)
#define VDEC2_ASSIST_TIMER0_HI                     ((0x2061  << 2) + 0xff620000)
#define VDEC2_ASSIST_TIMER1_LO                     ((0x2062  << 2) + 0xff620000)
#define VDEC2_ASSIST_TIMER1_HI                     ((0x2063  << 2) + 0xff620000)
#define VDEC2_ASSIST_DMA_INT                       ((0x2064  << 2) + 0xff620000)
#define VDEC2_ASSIST_DMA_INT_MSK                   ((0x2065  << 2) + 0xff620000)
#define VDEC2_ASSIST_DMA_INT2                      ((0x2066  << 2) + 0xff620000)
#define VDEC2_ASSIST_DMA_INT_MSK2                  ((0x2067  << 2) + 0xff620000)
#define VDEC2_ASSIST_MBOX0_IRQ_REG                 ((0x2070  << 2) + 0xff620000)
#define VDEC2_ASSIST_MBOX0_CLR_REG                 ((0x2071  << 2) + 0xff620000)
#define VDEC2_ASSIST_MBOX0_MASK                    ((0x2072  << 2) + 0xff620000)
#define VDEC2_ASSIST_MBOX0_FIQ_SEL                 ((0x2073  << 2) + 0xff620000)
#define VDEC2_ASSIST_MBOX1_IRQ_REG                 ((0x2074  << 2) + 0xff620000)
#define VDEC2_ASSIST_MBOX1_CLR_REG                 ((0x2075  << 2) + 0xff620000)
#define VDEC2_ASSIST_MBOX1_MASK                    ((0x2076  << 2) + 0xff620000)
#define VDEC2_ASSIST_MBOX1_FIQ_SEL                 ((0x2077  << 2) + 0xff620000)
#define VDEC2_ASSIST_MBOX2_IRQ_REG                 ((0x2078  << 2) + 0xff620000)
#define VDEC2_ASSIST_MBOX2_CLR_REG                 ((0x2079  << 2) + 0xff620000)
#define VDEC2_ASSIST_MBOX2_MASK                    ((0x207a  << 2) + 0xff620000)
#define VDEC2_ASSIST_MBOX2_FIQ_SEL                 ((0x207b  << 2) + 0xff620000)
//------------------------------------------------------------------------------
// HCODEC_ASSIST module level register offset
//------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  DOS_HCODEC_ASSIST_CBUS_BASE = 0x00
// -----------------------------------------------
#define HCODEC_ASSIST_MMC_CTRL0                    ((0x1001  << 2) + 0xff620000)
#define HCODEC_ASSIST_MMC_CTRL1                    ((0x1002  << 2) + 0xff620000)
#define HCODEC_ASSIST_MMC_CTRL2                    ((0x1003  << 2) + 0xff620000)
#define HCODEC_ASSIST_MMC_CTRL3                    ((0x1004  << 2) + 0xff620000)
//cfg_soft_rst = mfdin_reg0_crst[0]; // Soft Reset
//cfg_cg_cfe   = mfdin_reg0_crst[1]; // Clock Gating Forcing Enable
//cfg_dbuf_rst = mfdin_reg0_crst[2]; // Reset DBUF information
#define HCODEC_MFDIN_REG0_CRST                     ((0x1008  << 2) + 0xff620000)
//cfg_iformat       = mfdin_reg1_ctrl[3:0]; // Data In Format: 0 :CANVAS 422 YCbCr<-one canvas,
                                                     //        1 :CANVAS 444 YCbCr(or RGB)<-one canvas,
                                                     //        2 :CANVAS 420 Y<-one CrCb<-one (NV21)
                                                     //        3 :CANVAS 420 Y<-one CbCr<-one (NV12)
                                                     //        4 :CANVAS 420 Y<-one Cb<-one Cr<-one
                                                     //        5 :CANVAS 444 Y<-one Cb<-one Cr<-one
                                                     //        6 : Reserved for other canvas mode
                                                     //        7 : should combine with cfg_ifmt_extra, for 10-12bits
                                                     //        8 :LINEAR RGB888 (24bit)
                                                     //        9 :LINEAR RGB565 (16bit)
                                                     //        10:LINEAR YUV422
                                                     //        11:LINEAR YUV420 (Note:Legacy mode not supported)
                                                     //        12~15: Reserved for other linear mode
//cfg_oformat       = mfdin_reg1_ctrl[5:4];  // Data Out Format: 0:420 1:422 2:444 3:reserved
//cfg_dsample_enable= mfdin_reg1_ctrl[6];    // Downsample Enable
//cfg_dsample_trunc = mfdin_reg1_ctrl[7];    // Downsample Addition Option: 0:Round 1:Truncated
//cfg_block_ysize   = mfdin_reg1_ctrl[8];    // 0:block-y-size=16, 1:block-y-size=8(for JPEG's efficiency)
//cfg_interp_enable = mfdin_reg1_ctrl[9];    // Chroma Interpolation Enable
//cfg_interp_mode   = mfdin_reg1_ctrl[11:10];// 0:average round 1:average truncated 2:repeat left 3:repeat right
//cfg_r2y_enable    = mfdin_reg1_ctrl[12];   // RGb->YUV Enable
//cfg_r2y_mode      = mfdin_reg1_ctrl[14:13];// RGb->YUV Mode
//cfg_rgb565_mode   = mfdin_reg1_ctrl[15];   // RGB565 mode: 0:fill zero in tail 1:fill zero in head
//cfg_ifmt_extra    = mfdin_reg1_ctrl[17:16];// when cfg_iformat==7,
                                             //        0: CANVAS 12bit 422, YCbCr<-one canvas{...Y1[11:0],C1[11:0],Y0[11:0],C0[11:0]}
                                             //        1: CANVAS 10bit 444, YCbCr<-one canvas{...2'b0,Y0[9:0],U0[9:0],V0[9:0]}
                                             //        2: CANVAS 10bit 422, YCbCr<-one canvas{...Y1[9:0],C1[9:0],Y0[9:0],C0[9:0]}
//cfg_reserved1     = mfdin_reg1_ctrl[18];   // Reserved
//cfg_nr_enable     = mfdin_reg1_ctrl[19];   // Noise Reduction Enable
//cfg_outofpic      = mfdin_reg1_ctrl[28:20];// Out Of Picture Control: [8]mode:0:extend 1:fixed, [7:0]fixed value
//cfg_rd_blktype    = mfdin_reg1_ctrl[30:29];// Block Type: 0:H264_I_PIC_ALL_4x4, 1:H264_P_PIC_Y_16x16_C_8x8, 2:JPEG_ALL_8x8, 3:Reserved
//cfg_rd_nonycintl  = mfdin_reg1_ctrl[31];   // 0:YC interleaved 1:YC non-interleaved(for JPEG)
#define HCODEC_MFDIN_REG1_CTRL                     ((0x1009  << 2) + 0xff620000)
//mfdin_reg2: DEBUG Only Status
#define HCODEC_MFDIN_REG2_STAT                     ((0x100a  << 2) + 0xff620000)
//cfg_canvas_index0  = mfdin_reg3_canv[7:0];  //canvas index 0
//cfg_canvas_index1  = mfdin_reg3_canv[15:8]; //canvas index 1
//cfg_canvas_index2  = mfdin_reg3_canv[23:16];//canvas index 2
//cfg_canv_idx0_bppx = mfdin_reg3_canv[25:24];//canvas bytes per pixel in x direction for index0, 0:half 1:1 2:2 3:3
//cfg_canv_idx1_bppx = mfdin_reg3_canv[27:26];//canvas bytes per pixel in x direction for index1, 0:half 1:1 2:2 3:3
//cfg_canv_idx0_bppy = mfdin_reg3_canv[29:28];//canvas bytes per pixel in y direction for index0, 0:half 1:1 2:2 3:3
//cfg_canv_idx1_bppy = mfdin_reg3_canv[31:30];//canvas bytes per pixel in y direction for index1, 0:half 1:1 2:2 3:3
#define HCODEC_MFDIN_REG3_CANV                     ((0x100b  << 2) + 0xff620000)
//cfg_bytes_per_line  = mfdin_reg4_lnr0[15:0];  //linear Bytes per line
//cfg_linear_bytes4p  = mfdin_reg4_lnr0[17:16]; //linear (Bytes per pixel) - 1
//cfg_linear_dbl2line = mfdin_reg4_lnr0[18];    //linear double size for odd line
#define HCODEC_MFDIN_REG4_LNR0                     ((0x100c  << 2) + 0xff620000)
//cfg_base_address    = mfdin_reg5_lnr1[31:0];  //linear base address
#define HCODEC_MFDIN_REG5_LNR1                     ((0x100d  << 2) + 0xff620000)
//assign cfg_r2y_trunc     = mfdin_reg6_dcfg[9];   //RGb->YUV Addition Option: 0:Round 1:Truncated
//assign cfg_dma_ugt       = mfdin_reg6_dcfg[8];   //DMA Urgent
//assign cfg_dma_thread_id = mfdin_reg6_dcfg[7:6]; //DMA Thread ID
//assign cfg_dma_burst_num = mfdin_reg6_dcfg[5:0]; //DMA Burst Number
#define HCODEC_MFDIN_REG6_DCFG                     ((0x100e  << 2) + 0xff620000)
//cfg_soft_cmd = mfdin_reg7_scmd; // Soft Command [28]selfcleared start,[27:14]dmb_x,[13:0]dmb_y
#define HCODEC_MFDIN_REG7_SCMD                     ((0x100f  << 2) + 0xff620000)
//cfg_pic_xsize = mfdin_reg8_dmbl[23:12]; //pixel (x,y) at the begining of last dmb in the picturem, picture x size
//cfg_pic_ysize = mfdin_reg8_dmbl[11:0];  //picture y size
#define HCODEC_MFDIN_REG8_DMBL                     ((0x1010  << 2) + 0xff620000)
//cfg_endian = mfdin_reg9_endn; //Endian Control
#define HCODEC_MFDIN_REG9_ENDN                     ((0x1011  << 2) + 0xff620000)
//cfg_canv_biasx = mfdin_rega_cav1[23:12]; //canvas bias address x
//cfg_canv_biasy = mfdin_rega_cav1[11:0];  //canvas bias address y
#define HCODEC_MFDIN_REGA_CAV1                     ((0x1012  << 2) + 0xff620000)
//cfg_amp_en = mfdin_regb_ampc[24];      //Amplitude Enable
//cfg_amp_cy = mfdin_regb_ampc[23:16];   //Amplitude Coeff Y
//cfg_amp_cu = mfdin_regb_ampc[15:8];    //Amplitude Coeff U
//cfg_amp_cv = mfdin_regb_ampc[7:0];     //Amplitude Coeff V
#define HCODEC_MFDIN_REGB_AMPC                     ((0x1013  << 2) + 0xff620000)
//cfg_mb_end = mfdin_regc_mblp; // Soft Command [28]mb end enable,[27:14]dmb_x,[13:0]dmb_y
#define HCODEC_MFDIN_REGC_MBLP                     ((0x1014  << 2) + 0xff620000)
//       cfg_y_snr_en               = mfdin_reg0d[0];
//       cfg_y_snr_err_norm         = mfdin_reg0d[1];
// [3:0] cfg_y_snr_gau_bld_core     = mfdin_reg0d[5:2];
// [7:0] cfg_y_snr_gau_bld_ofst     = mfdin_reg0d[13:6];
// [5:0] cfg_y_snr_gau_bld_rate     = mfdin_reg0d[19:14];
// [5:0] cfg_y_snr_gau_alp0_min     = mfdin_reg0d[25:20];
// [5:0] cfg_y_snr_gau_alp0_max     = mfdin_reg0d[31:26];
#define HCODEC_MFDIN_REG0D                         ((0x1015  << 2) + 0xff620000)
//       cfg_y_tnr_en               = mfdin_reg0e[0];
//       cfg_y_tnr_mc_en            = mfdin_reg0e[1];
//       cfg_y_tnr_txt_mode         = mfdin_reg0e[2];
// [3:0] cfg_y_tnr_mot_sad_margin   = mfdin_reg0e[6:3];
// [5:0] cfg_y_tnr_alpha_min        = mfdin_reg0e[12:7];
// [5:0] cfg_y_tnr_alpha_max        = mfdin_reg0e[18:13];
// [5:0] cfg_y_tnr_deghost_os       = mfdin_reg0e[24:19];
#define HCODEC_MFDIN_REG0E                         ((0x1016  << 2) + 0xff620000)
// [3:0] cfg_y_tnr_mot_cortxt_rate  = mfdin_reg0f[3:0];
// [7:0] cfg_y_tnr_mot_distxt_ofst  = mfdin_reg0f[15:8];
// [3:0] cfg_y_tnr_mot_distxt_rate  = mfdin_reg0f[7:4];
// [7:0] cfg_y_tnr_mot_dismot_ofst  = mfdin_reg0f[23:16];
// [7:0] cfg_y_tnr_mot_frcsad_lock  = mfdin_reg0f[31:24];
#define HCODEC_MFDIN_REG0F                         ((0x1017  << 2) + 0xff620000)
// [7:0] cfg_y_tnr_mot2alp_frc_gain = mfdin_reg10[7:0];
// [7:0] cfg_y_tnr_mot2alp_nrm_gain = mfdin_reg10[15:8];
// [7:0] cfg_y_tnr_mot2alp_dis_gain = mfdin_reg10[23:16];
// [5:0] cfg_y_tnr_mot2alp_dis_ofst = mfdin_reg10[29:24];
#define HCODEC_MFDIN_REG10                         ((0x1018  << 2) + 0xff620000)
// [7:0] cfg_y_bld_beta2alp_rate    = mfdin_reg11[7:0];
// [5:0] cfg_y_bld_beta_min         = mfdin_reg11[13:8];
// [5:0] cfg_y_bld_beta_max         = mfdin_reg11[19:14];
#define HCODEC_MFDIN_REG11                         ((0x1019  << 2) + 0xff620000)
// REG12~16 for Chroma, same as Luma
#define HCODEC_MFDIN_REG12                         ((0x101a  << 2) + 0xff620000)
#define HCODEC_MFDIN_REG13                         ((0x101b  << 2) + 0xff620000)
#define HCODEC_MFDIN_REG14                         ((0x101c  << 2) + 0xff620000)
#define HCODEC_MFDIN_REG15                         ((0x101d  << 2) + 0xff620000)
#define HCODEC_MFDIN_REG16                         ((0x101e  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR1_INT0                    ((0x1025  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR1_INT1                    ((0x1026  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR1_INT2                    ((0x1027  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR1_INT3                    ((0x1028  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR1_INT4                    ((0x1029  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR1_INT5                    ((0x102a  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR1_INT6                    ((0x102b  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR1_INT7                    ((0x102c  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR1_INT8                    ((0x102d  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR1_INT9                    ((0x102e  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR1_INTA                    ((0x102f  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR1_INTB                    ((0x1030  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR1_INTC                    ((0x1031  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR1_INTD                    ((0x1032  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR1_INTE                    ((0x1033  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR1_INTF                    ((0x1034  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR2_INT0                    ((0x1035  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR2_INT1                    ((0x1036  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR2_INT2                    ((0x1037  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR2_INT3                    ((0x1038  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR2_INT4                    ((0x1039  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR2_INT5                    ((0x103a  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR2_INT6                    ((0x103b  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR2_INT7                    ((0x103c  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR2_INT8                    ((0x103d  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR2_INT9                    ((0x103e  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR2_INTA                    ((0x103f  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR2_INTB                    ((0x1040  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR2_INTC                    ((0x1041  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR2_INTD                    ((0x1042  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR2_INTE                    ((0x1043  << 2) + 0xff620000)
#define HCODEC_ASSIST_AMR2_INTF                    ((0x1044  << 2) + 0xff620000)
#define HCODEC_ASSIST_MBX_SSEL                     ((0x1045  << 2) + 0xff620000)
#define HCODEC_ASSIST_TIMER0_LO                    ((0x1060  << 2) + 0xff620000)
#define HCODEC_ASSIST_TIMER0_HI                    ((0x1061  << 2) + 0xff620000)
#define HCODEC_ASSIST_TIMER1_LO                    ((0x1062  << 2) + 0xff620000)
#define HCODEC_ASSIST_TIMER1_HI                    ((0x1063  << 2) + 0xff620000)
#define HCODEC_ASSIST_DMA_INT                      ((0x1064  << 2) + 0xff620000)
#define HCODEC_ASSIST_DMA_INT_MSK                  ((0x1065  << 2) + 0xff620000)
#define HCODEC_ASSIST_DMA_INT2                     ((0x1066  << 2) + 0xff620000)
#define HCODEC_ASSIST_DMA_INT_MSK2                 ((0x1067  << 2) + 0xff620000)
#define HCODEC_ASSIST_MBOX0_IRQ_REG                ((0x1070  << 2) + 0xff620000)
#define HCODEC_ASSIST_MBOX0_CLR_REG                ((0x1071  << 2) + 0xff620000)
#define HCODEC_ASSIST_MBOX0_MASK                   ((0x1072  << 2) + 0xff620000)
#define HCODEC_ASSIST_MBOX0_FIQ_SEL                ((0x1073  << 2) + 0xff620000)
#define HCODEC_ASSIST_MBOX1_IRQ_REG                ((0x1074  << 2) + 0xff620000)
#define HCODEC_ASSIST_MBOX1_CLR_REG                ((0x1075  << 2) + 0xff620000)
#define HCODEC_ASSIST_MBOX1_MASK                   ((0x1076  << 2) + 0xff620000)
#define HCODEC_ASSIST_MBOX1_FIQ_SEL                ((0x1077  << 2) + 0xff620000)
#define HCODEC_ASSIST_MBOX2_IRQ_REG                ((0x1078  << 2) + 0xff620000)
#define HCODEC_ASSIST_MBOX2_CLR_REG                ((0x1079  << 2) + 0xff620000)
#define HCODEC_ASSIST_MBOX2_MASK                   ((0x107a  << 2) + 0xff620000)
#define HCODEC_ASSIST_MBOX2_FIQ_SEL                ((0x107b  << 2) + 0xff620000)
//------------------------------------------------------------------------------
// MDEC module level register offset
//------------------------------------------------------------------------------
//
// Reading file:  mdec_regs.h
//
//========================================================================
//  MDEC module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_VDEC_MDEC_CBUS_BASE = 0x09
// -----------------------------------------------
#define MC_CTRL_REG                                ((0x0900  << 2) + 0xff620000)
#define MC_MB_INFO                                 ((0x0901  << 2) + 0xff620000)
#define MC_PIC_INFO                                ((0x0902  << 2) + 0xff620000)
#define MC_HALF_PEL_ONE                            ((0x0903  << 2) + 0xff620000)
#define MC_HALF_PEL_TWO                            ((0x0904  << 2) + 0xff620000)
#define POWER_CTL_MC                               ((0x0905  << 2) + 0xff620000)
#define MC_CMD                                     ((0x0906  << 2) + 0xff620000)
#define MC_CTRL0                                   ((0x0907  << 2) + 0xff620000)
#define MC_PIC_W_H                                 ((0x0908  << 2) + 0xff620000)
#define MC_STATUS0                                 ((0x0909  << 2) + 0xff620000)
#define MC_STATUS1                                 ((0x090a  << 2) + 0xff620000)
#define MC_CTRL1                                   ((0x090b  << 2) + 0xff620000)
#define MC_MIX_RATIO0                              ((0x090c  << 2) + 0xff620000)
#define MC_MIX_RATIO1                              ((0x090d  << 2) + 0xff620000)
#define MC_DP_MB_XY                                ((0x090e  << 2) + 0xff620000)
#define MC_OM_MB_XY                                ((0x090f  << 2) + 0xff620000)
#define PSCALE_RST                                 ((0x0910  << 2) + 0xff620000)
#define PSCALE_CTRL                                ((0x0911  << 2) + 0xff620000)
#define PSCALE_PICI_W                              ((0x0912  << 2) + 0xff620000)
#define PSCALE_PICI_H                              ((0x0913  << 2) + 0xff620000)
#define PSCALE_PICO_W                              ((0x0914  << 2) + 0xff620000)
#define PSCALE_PICO_H                              ((0x0915  << 2) + 0xff620000)
#define PSCALE_PICO_START_X                        ((0x0916  << 2) + 0xff620000)
#define PSCALE_PICO_START_Y                        ((0x0917  << 2) + 0xff620000)
#define PSCALE_DUMMY                               ((0x0918  << 2) + 0xff620000)
#define PSCALE_FILT0_COEF0                         ((0x0919  << 2) + 0xff620000)
#define PSCALE_FILT0_COEF1                         ((0x091a  << 2) + 0xff620000)
#define PSCALE_CMD_CTRL                            ((0x091b  << 2) + 0xff620000)
#define PSCALE_CMD_BLK_X                           ((0x091c  << 2) + 0xff620000)
#define PSCALE_CMD_BLK_Y                           ((0x091d  << 2) + 0xff620000)
#define PSCALE_STATUS                              ((0x091e  << 2) + 0xff620000)
#define PSCALE_BMEM_ADDR                           ((0x091f  << 2) + 0xff620000)
#define PSCALE_BMEM_DAT                            ((0x0920  << 2) + 0xff620000)
#define PSCALE_DRAM_BUF_CTRL                       ((0x0921  << 2) + 0xff620000)
#define PSCALE_MCMD_CTRL                           ((0x0922  << 2) + 0xff620000)
#define PSCALE_MCMD_XSIZE                          ((0x0923  << 2) + 0xff620000)
#define PSCALE_MCMD_YSIZE                          ((0x0924  << 2) + 0xff620000)
#define PSCALE_RBUF_START_BLKX                     ((0x0925  << 2) + 0xff620000)
#define PSCALE_RBUF_START_BLKY                     ((0x0926  << 2) + 0xff620000)
//`define PSCALE_RBUF_MB_WIDTH   8'h27
#define PSCALE_PICO_SHIFT_XY                       ((0x0928  << 2) + 0xff620000)
#define PSCALE_CTRL1                               ((0x0929  << 2) + 0xff620000)
//Bit 15, wmask enable
//Bit 14:13, filt0 srckey_less,
//Bit 12:11, filt1 srckey_less, in the case of the interpolated data is equal distance to
//key data and normal data, 00: select normal data, 01: select right data, 10: select key data
//Bit 10:9, srckey mode, 00: equal, 01: less than or equal, 10: great than or equal
//Bit 8, src key enable
//Bit 7:0, y src key
#define PSCALE_SRCKEY_CTRL0                        ((0x092a  << 2) + 0xff620000)
//Bit 15:8, cb src key
//Bit 7:0, cr src key
#define PSCALE_SRCKEY_CTRL1                        ((0x092b  << 2) + 0xff620000)
//Bit 22:16 canvas_rd_addr2
//Bit 14:8 canvas_rd_addr1
//Bit 6:0 canvas_rd_addr1
#define PSCALE_CANVAS_RD_ADDR                      ((0x092c  << 2) + 0xff620000)
//Bit 22:16 canvas_wr_addr2
//Bit 14:8 canvas_wr_addr1
//Bit 6:0 canvas_wr_addr1
#define PSCALE_CANVAS_WR_ADDR                      ((0x092d  << 2) + 0xff620000)
//bit 13:8 pscale thread ID and token
//bit 7 disable write response count adding to busy bit
//bit 5:0  pscale prearbitor burst num
#define PSCALE_CTRL2                               ((0x092e  << 2) + 0xff620000)
//   31 - use_omem_mb_xy_auto
//23:16 - omem_max_mb_x
//15:8  - omem_mb_y_auto
// 7:0  - omem_mb_x_auto
#define HDEC_MC_OMEM_AUTO                          ((0x0930  << 2) + 0xff620000)
#define HDEC_MC_MBRIGHT_IDX                        ((0x0931  << 2) + 0xff620000)
#define HDEC_MC_MBRIGHT_RD                         ((0x0932  << 2) + 0xff620000)
#define MC_MPORT_CTRL                              ((0x0940  << 2) + 0xff620000)
#define MC_MPORT_DAT                               ((0x0941  << 2) + 0xff620000)
#define MC_WT_PRED_CTRL                            ((0x0942  << 2) + 0xff620000)
#define MC_MBBOT_ST_EVEN_ADDR                      ((0x0944  << 2) + 0xff620000)
#define MC_MBBOT_ST_ODD_ADDR                       ((0x0945  << 2) + 0xff620000)
#define MC_DPDN_MB_XY                              ((0x0946  << 2) + 0xff620000)
#define MC_OMDN_MB_XY                              ((0x0947  << 2) + 0xff620000)
#define MC_HCMDBUF_H                               ((0x0948  << 2) + 0xff620000)
#define MC_HCMDBUF_L                               ((0x0949  << 2) + 0xff620000)
#define MC_HCMD_H                                  ((0x094a  << 2) + 0xff620000)
#define MC_HCMD_L                                  ((0x094b  << 2) + 0xff620000)
#define MC_IDCT_DAT                                ((0x094c  << 2) + 0xff620000)
#define MC_CTRL_GCLK_CTRL                          ((0x094d  << 2) + 0xff620000)
#define MC_OTHER_GCLK_CTRL                         ((0x094e  << 2) + 0xff620000)
//Bit 29:24, mbbot thread ID and token
//Bit 21:16, mc read/write thread ID and token
//Bit 13:8,  mbbot pre-arbitor burst number
//Bit 5:0,   mc pre-arbitor burst number
#define MC_CTRL2                                   ((0x094f  << 2) + 0xff620000)
// `define DBLK_QUANT            8'h76 // ONLY for $ucode/real/amrisc/rv.s, reg value from apollo
//`define ANC1_CANVAS_ADDR      8'h80
//`define ANC2_CANVAS_ADDR      8'h81
//`define REC_CANVAS_ADDR       8'h89
//`define MDEC_PIC_W          8'h8c
//`define MDEC_PIC_H          8'h8d
// mdec_pic_dc_mux_ctrl[31]  -- mcr_hevc_mode
#define MDEC_PIC_DC_MUX_CTRL                       ((0x098d  << 2) + 0xff620000)
#define MDEC_PIC_DC_CTRL                           ((0x098e  << 2) + 0xff620000)
#define MDEC_PIC_DC_STATUS                         ((0x098f  << 2) + 0xff620000)
#define ANC0_CANVAS_ADDR                           ((0x0990  << 2) + 0xff620000)
#define ANC1_CANVAS_ADDR                           ((0x0991  << 2) + 0xff620000)
#define ANC2_CANVAS_ADDR                           ((0x0992  << 2) + 0xff620000)
#define ANC3_CANVAS_ADDR                           ((0x0993  << 2) + 0xff620000)
#define ANC4_CANVAS_ADDR                           ((0x0994  << 2) + 0xff620000)
#define ANC5_CANVAS_ADDR                           ((0x0995  << 2) + 0xff620000)
#define ANC6_CANVAS_ADDR                           ((0x0996  << 2) + 0xff620000)
#define ANC7_CANVAS_ADDR                           ((0x0997  << 2) + 0xff620000)
#define ANC8_CANVAS_ADDR                           ((0x0998  << 2) + 0xff620000)
#define ANC9_CANVAS_ADDR                           ((0x0999  << 2) + 0xff620000)
#define ANC10_CANVAS_ADDR                          ((0x099a  << 2) + 0xff620000)
#define ANC11_CANVAS_ADDR                          ((0x099b  << 2) + 0xff620000)
#define ANC12_CANVAS_ADDR                          ((0x099c  << 2) + 0xff620000)
#define ANC13_CANVAS_ADDR                          ((0x099d  << 2) + 0xff620000)
#define ANC14_CANVAS_ADDR                          ((0x099e  << 2) + 0xff620000)
#define ANC15_CANVAS_ADDR                          ((0x099f  << 2) + 0xff620000)
#define ANC16_CANVAS_ADDR                          ((0x09a0  << 2) + 0xff620000)
#define ANC17_CANVAS_ADDR                          ((0x09a1  << 2) + 0xff620000)
#define ANC18_CANVAS_ADDR                          ((0x09a2  << 2) + 0xff620000)
#define ANC19_CANVAS_ADDR                          ((0x09a3  << 2) + 0xff620000)
#define ANC20_CANVAS_ADDR                          ((0x09a4  << 2) + 0xff620000)
#define ANC21_CANVAS_ADDR                          ((0x09a5  << 2) + 0xff620000)
#define ANC22_CANVAS_ADDR                          ((0x09a6  << 2) + 0xff620000)
#define ANC23_CANVAS_ADDR                          ((0x09a7  << 2) + 0xff620000)
#define ANC24_CANVAS_ADDR                          ((0x09a8  << 2) + 0xff620000)
#define ANC25_CANVAS_ADDR                          ((0x09a9  << 2) + 0xff620000)
#define ANC26_CANVAS_ADDR                          ((0x09aa  << 2) + 0xff620000)
#define ANC27_CANVAS_ADDR                          ((0x09ab  << 2) + 0xff620000)
#define ANC28_CANVAS_ADDR                          ((0x09ac  << 2) + 0xff620000)
#define ANC29_CANVAS_ADDR                          ((0x09ad  << 2) + 0xff620000)
#define ANC30_CANVAS_ADDR                          ((0x09ae  << 2) + 0xff620000)
#define ANC31_CANVAS_ADDR                          ((0x09af  << 2) + 0xff620000)
#define DBKR_CANVAS_ADDR                           ((0x09b0  << 2) + 0xff620000)
#define DBKW_CANVAS_ADDR                           ((0x09b1  << 2) + 0xff620000)
#define REC_CANVAS_ADDR                            ((0x09b2  << 2) + 0xff620000)
//28:24, read/write, current canvas idx, used in h264 only now
//23:0, read only, current canvas address, 23:16, Cr canvas addr, 15:8, Cb canvas addr, 7:0, Y  canvas addr
#define CURR_CANVAS_CTRL                           ((0x09b3  << 2) + 0xff620000)
#define MDEC_PIC_DC_THRESH                         ((0x09b8  << 2) + 0xff620000)
#define MDEC_PICR_BUF_STATUS                       ((0x09b9  << 2) + 0xff620000)
#define MDEC_PICW_BUF_STATUS                       ((0x09ba  << 2) + 0xff620000)
#define MCW_DBLK_WRRSP_CNT                         ((0x09bb  << 2) + 0xff620000)
#define MC_MBBOT_WRRSP_CNT                         ((0x09bc  << 2) + 0xff620000)
#define MDEC_PICW_BUF2_STATUS                      ((0x09bd  << 2) + 0xff620000)
#define WRRSP_FIFO_PICW_DBK                        ((0x09be  << 2) + 0xff620000)
#define WRRSP_FIFO_PICW_MC                         ((0x09bf  << 2) + 0xff620000)
#define AV_SCRATCH_0                               ((0x09c0  << 2) + 0xff620000)
#define AV_SCRATCH_1                               ((0x09c1  << 2) + 0xff620000)
#define AV_SCRATCH_2                               ((0x09c2  << 2) + 0xff620000)
#define AV_SCRATCH_3                               ((0x09c3  << 2) + 0xff620000)
#define AV_SCRATCH_4                               ((0x09c4  << 2) + 0xff620000)
#define AV_SCRATCH_5                               ((0x09c5  << 2) + 0xff620000)
#define AV_SCRATCH_6                               ((0x09c6  << 2) + 0xff620000)
#define AV_SCRATCH_7                               ((0x09c7  << 2) + 0xff620000)
#define AV_SCRATCH_8                               ((0x09c8  << 2) + 0xff620000)
#define AV_SCRATCH_9                               ((0x09c9  << 2) + 0xff620000)
#define AV_SCRATCH_A                               ((0x09ca  << 2) + 0xff620000)
#define AV_SCRATCH_B                               ((0x09cb  << 2) + 0xff620000)
#define AV_SCRATCH_C                               ((0x09cc  << 2) + 0xff620000)
#define AV_SCRATCH_D                               ((0x09cd  << 2) + 0xff620000)
#define AV_SCRATCH_E                               ((0x09ce  << 2) + 0xff620000)
#define AV_SCRATCH_F                               ((0x09cf  << 2) + 0xff620000)
#define AV_SCRATCH_G                               ((0x09d0  << 2) + 0xff620000)
#define AV_SCRATCH_H                               ((0x09d1  << 2) + 0xff620000)
#define AV_SCRATCH_I                               ((0x09d2  << 2) + 0xff620000)
#define AV_SCRATCH_J                               ((0x09d3  << 2) + 0xff620000)
#define AV_SCRATCH_K                               ((0x09d4  << 2) + 0xff620000)
#define AV_SCRATCH_L                               ((0x09d5  << 2) + 0xff620000)
#define AV_SCRATCH_M                               ((0x09d6  << 2) + 0xff620000)
#define AV_SCRATCH_N                               ((0x09d7  << 2) + 0xff620000)
// bit[29:24] A_brst_num_co_mb
// bit[21:16] A_id_co_mb
// bit[11:0] wrrsp_count_co_mb
#define WRRSP_CO_MB                                ((0x09d8  << 2) + 0xff620000)
// bit[29:24] A_brst_num_dcac
// bit[21:16] A_id_dcac
// bit[11:0] wrrsp_count_dcac
#define WRRSP_DCAC                                 ((0x09d9  << 2) + 0xff620000)
// bit[11:0] wrrsp_count_vld
#define WRRSP_VLD                                  ((0x09da  << 2) + 0xff620000)
// doublew_cfg0[0];     //       Second Channel Enable, 1:Enable 0:Disable
// doublew_cfg0[3:1];   // [2:0] Endian Control for Luma
// doublew_cfg0[5:4];   // [1:0] Pixel sel by horizontal, 0x:1/2 10:left 11:right
// doublew_cfg0[7:6];   // [1:0] Pixel sel by vertical,   0x:1/2 10:up 11:down
// doublew_cfg0[8];     //       Size by horizontal, 0:original size 1: 1/2 shrunken size
// doublew_cfg0[9];     //       Size by vertical,   0:original size 1: 1/2 shrunken size
// doublew_cfg0[10];    //       1:Round 0:Truncation
// doublew_cfg0[11];    //       DMA Urgent
// doublew_cfg0[17:12]; // [5:0] DMA Burst Number
// doublew_cfg0[23:18]; // [5:0] DMA ID
// doublew_cfg0[26:24]; // [2:0] Endian Control for Chroma
// doublew_cfg0[27];    //       Source from, 1:MCW 0:DBLK
// doublew_cfg0[29:28]; // [1:0] 0x:select both top and bottom 10:select top 11:select bottom
// doublew_cfg0[30];    //       0:no merge 1:automatic merge
// doublew_cfg0[31];    //       0:Y addr no change 1:Y addr divided to half
#define MDEC_DOUBLEW_CFG0                          ((0x09db  << 2) + 0xff620000)
// doublew_cfg1[7:0];   // [7:0] DMA Canvas Address for Luma
// doublew_cfg1[15:8];  // [7:0] DMA Canvas Address for Chroma
// doublew_cfg1[16];    //       Disable 1st Write -
// doublew_cfg1[17];    //       Reverse to original version -
// doublew_cfg1[18];    //       DMA Address Mode - 0:Canvas Mode 1:Non-Canvas Mode
#define MDEC_DOUBLEW_CFG1                          ((0x09dc  << 2) + 0xff620000)
// doublew_cfg2[11:0];  //[11:0] vertical flip initial value
// doublew_cfg2[15];    //       vertical flip enable
// doublew_cfg2[24:16]; // [8:0] horizontal flip initial value
// doublew_cfg2[31];    //       horizontal flip enable
#define MDEC_DOUBLEW_CFG2                          ((0x09dd  << 2) + 0xff620000)
// doublew_cfg3[31:0];  //[31:0] non-canvas start address for Luma -
#define MDEC_DOUBLEW_CFG3                          ((0x09de  << 2) + 0xff620000)
// doublew_cfg4[31:0];  //[31:0] non-canvas start address for Chroma -
#define MDEC_DOUBLEW_CFG4                          ((0x09df  << 2) + 0xff620000)
// doublew_cfg5[12:0];  //[12:0] non-canvas picture width for Luma -
// doublew_cfg5[28:16]; //[12:0] non-canvas picture width for Chroma -
#define MDEC_DOUBLEW_CFG5                          ((0x09e0  << 2) + 0xff620000)
// doublew_cfg6: reserved
#define MDEC_DOUBLEW_CFG6                          ((0x09e1  << 2) + 0xff620000)
// doublew_cfg7: reserved
#define MDEC_DOUBLEW_CFG7                          ((0x09e2  << 2) + 0xff620000)
// doublew_status[11:0];//[11:0] wrrsp_count_doublew
// doublew_status[12];  //       doublew_status_busy
// doublew_status[13];  //       doublew_status_error
#define MDEC_DOUBLEW_STATUS                        ((0x09e3  << 2) + 0xff620000)
#define MDEC_EXTIF_CFG0                            ((0x09e4  << 2) + 0xff620000)
#define MDEC_EXTIF_CFG1                            ((0x09e5  << 2) + 0xff620000)
#define MDEC_EXTIF_STS0                            ((0x09e6  << 2) + 0xff620000)
//======================================
//  MC Control Register Bits
//
//======================================
// For bits, just copy the defines...don't translate to addresses
    #define MC_ENABLE	    0x0001
    //`define MC_RESET	    16'h0002
    #define SKIP_MB		    0x0004

//======================================
//  MB Info Register Bits
//
//======================================
    #define INTRA_MB	    0x0001

    #define BWD_PRED	    0x0004
    #define FWD_PRED	    0x0008

    #define FLD_MOT		    0x0100
    #define FRM_16x8_MOT	0x0200
    #define DUAL_PRM_MOT	0x0300

    #define FRM_DCT		    0x0000	    // Bit 10
    #define FLD_DCT		    0x0400

//======================================
//  MB Info Register Bits
//
//======================================
    #define I_PIC		    0x0001
    #define P_PIC		    0x0002
    #define B_PIC		    0x0003

    #define FLD_PIC		    0x0000	    // Bit 8
    #define FRM_PIC		    0x0100
//========================================================================
// DBLK Register:  12'h950 - 12'h97f
//========================================================================
#define DBLK_RST                                   ((0x0950  << 2) + 0xff620000)
#define DBLK_CTRL                                  ((0x0951  << 2) + 0xff620000)
#define DBLK_MB_WID_HEIGHT                         ((0x0952  << 2) + 0xff620000)
#define DBLK_STATUS                                ((0x0953  << 2) + 0xff620000)
#define DBLK_CMD_CTRL                              ((0x0954  << 2) + 0xff620000)
#define DBLK_MB_XY                                 ((0x0955  << 2) + 0xff620000)
#define DBLK_QP                                    ((0x0956  << 2) + 0xff620000)
#define DBLK_Y_BHFILT                              ((0x0957  << 2) + 0xff620000)
#define DBLK_Y_BHFILT_HIGH                         ((0x0958  << 2) + 0xff620000)
#define DBLK_Y_BVFILT                              ((0x0959  << 2) + 0xff620000)
#define DBLK_CB_BFILT                              ((0x095a  << 2) + 0xff620000)
#define DBLK_CR_BFILT                              ((0x095b  << 2) + 0xff620000)
#define DBLK_Y_HFILT                               ((0x095c  << 2) + 0xff620000)
#define DBLK_Y_HFILT_HIGH                          ((0x095d  << 2) + 0xff620000)
#define DBLK_Y_VFILT                               ((0x095e  << 2) + 0xff620000)
#define DBLK_CB_FILT                               ((0x095f  << 2) + 0xff620000)
#define DBLK_CR_FILT                               ((0x0960  << 2) + 0xff620000)
#define DBLK_BETAX_QP_SEL                          ((0x0961  << 2) + 0xff620000)
#define DBLK_CLIP_CTRL0                            ((0x0962  << 2) + 0xff620000)
#define DBLK_CLIP_CTRL1                            ((0x0963  << 2) + 0xff620000)
#define DBLK_CLIP_CTRL2                            ((0x0964  << 2) + 0xff620000)
#define DBLK_CLIP_CTRL3                            ((0x0965  << 2) + 0xff620000)
#define DBLK_CLIP_CTRL4                            ((0x0966  << 2) + 0xff620000)
#define DBLK_CLIP_CTRL5                            ((0x0967  << 2) + 0xff620000)
#define DBLK_CLIP_CTRL6                            ((0x0968  << 2) + 0xff620000)
#define DBLK_CLIP_CTRL7                            ((0x0969  << 2) + 0xff620000)
#define DBLK_CLIP_CTRL8                            ((0x096a  << 2) + 0xff620000)
#define DBLK_STATUS1                               ((0x096b  << 2) + 0xff620000)
#define DBLK_GCLK_FREE                             ((0x096c  << 2) + 0xff620000)
#define DBLK_GCLK_OFF                              ((0x096d  << 2) + 0xff620000)
#define DBLK_AVSFLAGS                              ((0x096e  << 2) + 0xff620000)
// bit 15:0
#define DBLK_CBPY                                  ((0x0970  << 2) + 0xff620000)
// bit 11:8 -- deblk_cbpy_bottom
// bit 7:4 -- deblk_cbpy_left
// bit 3:0 -- deblk_cbpy_top
#define DBLK_CBPY_ADJ                              ((0x0971  << 2) + 0xff620000)
// bit 7:0 -- deblk_cbpc
#define DBLK_CBPC                                  ((0x0972  << 2) + 0xff620000)
// bit 15 -- bottom_mb
// bit 14 -- left_mb
// bit 13 -- top_mb
// bit 12 -- reserved
// bit 11:8 -- deblk_cbpc_bottom
// bit 7:4 -- deblk_cbpc_left
// bit 3:0 -- deblk_cbpc_top
#define DBLK_CBPC_ADJ                              ((0x0973  << 2) + 0xff620000)
// bit 15:8 -- deblk_hmvd   -- {left_1, left_0, below_1, below_0, block3-0}
// bit 7:0 -- deblk_vmvd    -- {top_1, top_0, below_1, below_0, block3-0}
#define DBLK_VHMVD                                 ((0x0974  << 2) + 0xff620000)
// bit 13:12 -- right_vmvd
// bit 11 -- right_above_vmvd
// bit 10 -- left_below_hmvd
// bit 9 -- disable_dblk_luma
// bit 8 -- disable_dblk_chroma
// bit 7 -- bBelowRefDiff
// bit 6 -- bLeftRefDiff
// bit 5 -- bAboveRefDiff
// bit 4 -- reserved
// bit 3 -- s_below
// bit 2 -- s_left
// bit 1 -- s_above
// bit 0 -- s
#define DBLK_STRONG                                ((0x0975  << 2) + 0xff620000)
// bit 14:10 -- PQUANT
// bit 9:5 -- left_PQUANT
// bit 4:0 -- top_PQUANT
#define DBLK_RV8_QUANT                             ((0x0976  << 2) + 0xff620000)
#define DBLK_CBUS_HCMD2                            ((0x0977  << 2) + 0xff620000)
#define DBLK_CBUS_HCMD1                            ((0x0978  << 2) + 0xff620000)
#define DBLK_CBUS_HCMD0                            ((0x0979  << 2) + 0xff620000)
#define DBLK_VLD_HCMD2                             ((0x097a  << 2) + 0xff620000)
#define DBLK_VLD_HCMD1                             ((0x097b  << 2) + 0xff620000)
#define DBLK_VLD_HCMD0                             ((0x097c  << 2) + 0xff620000)
#define DBLK_OST_YBASE                             ((0x097d  << 2) + 0xff620000)
#define DBLK_OST_CBCRDIFF                          ((0x097e  << 2) + 0xff620000)
//13:8 dblk thread ID and token
//5:0  dblk prearbitor burst num
#define DBLK_CTRL1                                 ((0x097f  << 2) + 0xff620000)
// MCRCC_CTL1
// 31:3  <reserved[23:0]>
// 2     <cfg_field_pic>
// 1     <sw_rst>
// 0     <bypass_en>
#define MCRCC_CTL1                                 ((0x0980  << 2) + 0xff620000)
// MCRCC_CTL2
// 31:24    <cfg_cache_anc01_c[7:0]>
// 23:16    <cfg_cache_anc01_y[7:0]>
// 15:8     <cfg_cache_anc00_c[7:0]>
// 7:0      <cfg_cache_anc00_y[7:0]>
#define MCRCC_CTL2                                 ((0x0981  << 2) + 0xff620000)
// MCRCC_CTL3
// 31:24    <cfg_cache_anc11_c[7:0]>
// 23:16    <cfg_cache_anc11_y[7:0]>
// 15:8     <cfg_cache_anc10_c[7:0]>
// 7:0      <cfg_cache_anc10_y[7:0]>
#define MCRCC_CTL3                                 ((0x0982  << 2) + 0xff620000)
// bit[31:10] reserved
// bit[9:0] sw_clock_gating control
// [9] vdec clk_en for assist and cbus.
// [8] vdec clk_en for ddr
// [7] vdec clk_en for vcpu
// [6] vdec clk_en for assist
// [5] vdec clk_en for dblk
// [4] vdec clk_en for iqidct
// [3] vdec clk_en for mc
// [2] vdec clk_en for pic_dc
// [1] vdec clk_en for psc
// [0] vdec clk_en for vld
#define GCLK_EN                                    ((0x0983  << 2) + 0xff620000)
// [0]  Reserved
// [1]  Reserved
// [2]  Reset assist, mdec's CBUS
// [3]  Reset mdec's VLD
// [4]  Reset mdec's VLD
// [5]  Reset mdec's VLD
// [6]  Reset mdec's IQIDCT
// [7]  Reset mdec's MC
// [8]  Reset mdec's DBLK
// [9]  Reset mdec's PIC_DC
// [10] Reset mdec's Pscale
// [11] Reset vcpu's MCPU
// [12] Reset vcpu's CCPU
// [13] Reset mmc_pre_arb
#define MDEC_SW_RESET                              ((0x0984  << 2) + 0xff620000)
//DBLK last address 12'h97f
//
// Closing file:  mdec_regs.h
//
//------------------------------------------------------------------------------
// VLD module level register offset
//------------------------------------------------------------------------------
//
// Reading file:  vld_regs.h
//
//========================================================================
//  VLD module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_VDEC_VLD_CBUS_BASE = 0x0c
// -----------------------------------------------
#define VLD_STATUS_CTRL                            ((0x0c00  << 2) + 0xff620000)
//
// bit 10 -- use_old_shift_en
// bit 9 -- output_mv_not_pmv
// bit 8:5 -- force_zigzag
// bit 4 -- force_zigzag_en
// bit 3 -- disable_viff_anempty_int
// bit 2 -- disable_m2_ac_coeff_one_cycle
// bit 1 -- forced_reset  force reset pmv
// bit 0 -- mpeg_type  0:mpeg1 1: mpeg2
#define MPEG1_2_REG                                ((0x0c01  << 2) + 0xff620000)
#define F_CODE_REG                                 ((0x0c02  << 2) + 0xff620000)
#define PIC_HEAD_INFO                              ((0x0c03  << 2) + 0xff620000)
#define SLICE_VER_POS_PIC_TYPE                     ((0x0c04  << 2) + 0xff620000)
#define QP_VALUE_REG                               ((0x0c05  << 2) + 0xff620000)
#define MBA_INC                                    ((0x0c06  << 2) + 0xff620000)
#define MB_MOTION_MODE                             ((0x0c07  << 2) + 0xff620000)
//`define PACKET_BYTE_COUNT   8'h08
// bit 15 -- force_search_startcode_en
// bit 14 -- int_cpu_when_error (before do anything)
// bit 13 -- vld_error_reset
// bit 12 -- return_on_slice_header
// bit 6 -- jpeg_ff00_en
// bit 5:0 -- vld_power_ctl
#define POWER_CTL_VLD                              ((0x0c08  << 2) + 0xff620000)
#define MB_WIDTH                                   ((0x0c09  << 2) + 0xff620000)
#define SLICE_QP                                   ((0x0c0a  << 2) + 0xff620000)
// `define MB_X_MB_Y           8'h0b   /* current MBX and MBY                  */
#define PRE_START_CODE                             ((0x0c0b  << 2) + 0xff620000)
#define SLICE_START_BYTE_01                        ((0x0c0c  << 2) + 0xff620000)
#define SLICE_START_BYTE_23                        ((0x0c0d  << 2) + 0xff620000)
#define RESYNC_MARKER_LENGTH                       ((0x0c0e  << 2) + 0xff620000)
// bit[6:5] - frame/field info, 01 - top, 10 - bottom, 11 - frame
// bit[4:0] - buffer ID
// L0_BUFF_ID_0, L0_BUFF_ID_1, L1_BUFF_ID_0, L1_BUFF_ID_1
#define DECODER_BUFFER_INFO                        ((0x0c0f  << 2) + 0xff620000)
#define FST_FOR_MV_X                               ((0x0c10  << 2) + 0xff620000)
#define FST_FOR_MV_Y                               ((0x0c11  << 2) + 0xff620000)
#define SCD_FOR_MV_X                               ((0x0c12  << 2) + 0xff620000)
#define SCD_FOR_MV_Y                               ((0x0c13  << 2) + 0xff620000)
#define FST_BAK_MV_X                               ((0x0c14  << 2) + 0xff620000)
#define FST_BAK_MV_Y                               ((0x0c15  << 2) + 0xff620000)
#define SCD_BAK_MV_X                               ((0x0c16  << 2) + 0xff620000)
#define SCD_BAK_MV_Y                               ((0x0c17  << 2) + 0xff620000)
// Bit 7:4 -- read_buffer_interlace  0-progressive, 1-interlace, used in VC1
// bit 3 -- disable_new_stcode_search_fix // From GXM
// bit 2 -- weighting_prediction
// bit 1 -- mb_weighting_flag
// bit 0 -- slice_weighting_flag
#define VLD_DECODE_CONTROL                         ((0x0c18  << 2) + 0xff620000)
#define VLD_REVERVED_19                            ((0x0c19  << 2) + 0xff620000)
#define VIFF_BIT_CNT                               ((0x0c1a  << 2) + 0xff620000)
#define BYTE_ALIGN_PEAK_HI                         ((0x0c1b  << 2) + 0xff620000)
#define BYTE_ALIGN_PEAK_LO                         ((0x0c1c  << 2) + 0xff620000)
#define NEXT_ALIGN_PEAK                            ((0x0c1d  << 2) + 0xff620000)
// bit 31    : byte_aligned_zero_23_from_org // From GXM
// bit 30    : force_shift_out_drop_flag_zero // From GXM
// bit 29    : en_st_protect_from_org // From GXM
// bit 28    : enable_halt_decode_start_voff
// bit 27    : disable_C_pred_check
// bit 26    : disable_I4_pred_check
// bit 25    : disable_I16_pred_check
// bit 24    : check_avs_1st_drop
// bit 23    : enable_cabac_protect // From GXM
// bit 22    : enable_avs_drop_more
// bit 21    : reset_avs_drop_ptr
// bit 20    : reset_cabac_use_next_at_end_req
// bit 19    : vc1_inv_intra_co_mb_ref_rd
// bit 18    : vc1_inv_co_mb_ref_rd
// bit 17    : vc1_inv_intra_co_mb_ref_wr
// bit 16    : vc1_inv_co_mb_ref_wr
// bit 15    : disable_mv_cal_begin_only
// bit 14    : avs_drop_enable
// bit 13:12 : avs_drop_ptr
// bit 11:8  : avs_demu_ctl_reg
// bit 7 : avs_enable
// bit 6 : disable_dblk_hcmd
// bit 5 : disable_mc_hcmd
// bit 4 : first_mode3_set enable
// bit 3 : first_mode3
// bit 2:1 : vc1_profile  0-SP, 1-MP, 2-reserved, 3-AP
// bit 0   : vc1_enable
#define VC1_CONTROL_REG                            ((0x0c1e  << 2) + 0xff620000)
#define PMV1_X                                     ((0x0c20  << 2) + 0xff620000)
#define PMV1_Y                                     ((0x0c21  << 2) + 0xff620000)
#define PMV2_X                                     ((0x0c22  << 2) + 0xff620000)
#define PMV2_Y                                     ((0x0c23  << 2) + 0xff620000)
#define PMV3_X                                     ((0x0c24  << 2) + 0xff620000)
#define PMV3_Y                                     ((0x0c25  << 2) + 0xff620000)
#define PMV4_X                                     ((0x0c26  << 2) + 0xff620000)
#define PMV4_Y                                     ((0x0c27  << 2) + 0xff620000)
// Can't use the same address for different defines
// Therefore, create a single define that covers both
// Only appears to be used in micro-code since the VLD hardware is
// hard coded.
// `define M4_TABLE_SELECT     8'h28  // Does this exist in HW ? Added from register_mp2.h
// `define M4_TABLE_OUTPUT     8'h28  // Does this exist in HW ? Added from register_mp2.h
#define M4_TABLE_SELECT                            ((0x0c28  << 2) + 0xff620000)
#define M4_CONTROL_REG                             ((0x0c29  << 2) + 0xff620000)
#define BLOCK_NUM                                  ((0x0c2a  << 2) + 0xff620000)
#define PATTERN_CODE                               ((0x0c2b  << 2) + 0xff620000)
#define MB_INFO                                    ((0x0c2c  << 2) + 0xff620000)
#define VLD_DC_PRED                                ((0x0c2d  << 2) + 0xff620000)
#define VLD_ERROR_MASK                             ((0x0c2e  << 2) + 0xff620000)
#define VLD_DC_PRED_C                              ((0x0c2f  << 2) + 0xff620000)
#define LAST_SLICE_MV_ADDR                         ((0x0c30  << 2) + 0xff620000)
#define LAST_MVX                                   ((0x0c31  << 2) + 0xff620000)
#define LAST_MVY                                   ((0x0c32  << 2) + 0xff620000)
#define VLD_C38                                    ((0x0c38  << 2) + 0xff620000)
#define VLD_C39                                    ((0x0c39  << 2) + 0xff620000)
#define VLD_STATUS                                 ((0x0c3a  << 2) + 0xff620000)
#define VLD_SHIFT_STATUS                           ((0x0c3b  << 2) + 0xff620000)
// `define VLD_SHIFT_INFO      8'h3b  // Does this exist in HW ? used in $ucode/mpeg4
#define VOFF_STATUS                                ((0x0c3c  << 2) + 0xff620000)
#define VLD_C3D                                    ((0x0c3d  << 2) + 0xff620000)
#define VLD_DBG_INDEX                              ((0x0c3e  << 2) + 0xff620000)
// vld_buff_info -- (index == 0)
// Bit11]    halt_decode_start_voff
// Bit10]    C_pred_error
// Bit[9]    I4_pred_error
// Bit[8]    I16_pred_error
// Bit[7:6]  mv_UR_ready_cnt;
// Bit[5]  vld_wr_idx
// Bit[4]  iq_rd_idx
// Bit[3]  vld_vi_block_rdy_1
// Bit[2]  vld_vi_block_rdy_2
// Bit[1]  voff_empty_1
// Bit[0]  voff_empty_2
// cabac_buff_info_0 -- (index == 1)
// Bit[31] shift_data_ready
// Bit[30:29] Reserved
// Bit[28:24] cabac_buffer_ptr
// Bit[23:0] cabac_buffer
// cabac_buff_info_1 -- (index == 2)
// Bit[31:29] Reserved
// Bit[28:20] Drange
// Bit[19:16] bin_count_4
// Bit[15:13] Reserved
// Bit[12:6] context_mem_do
// Bit[5:3] coeff_state
// Bit[2:0] mvd_state
// h264_mv_present -- (index == 3)
// Bit[31:16] mv_present_l0
// Bit[15:0] mv_present_l1
// h264_mv_cal_info_0 -- (index == 4)
// [31:28] mv_cal_state
// [27:24] direct_spatial_cnt
// Bit[23:21] Reserved
// Bit[20] mv_UR_ready_for_mv_cal
// Bit[19] co_mb_mem_ready_for_mv_cal
// Bit[18] mc_dblk_cmd_if_busy
// Bit[17] h264_co_mb_wr_busy
// Bit[16] H264_cbp_blk_ready
// Bit[15] mc_hcmd_rrdy
// Bit[14] mc_hcmd_srdy
// Bit[13] mc_cmd_if_ready
// Bit[12] mc_hcmd_mv_available
// Bit[11:8] mc_cmd_if_state
// Bit[7] dblk_hcmd_rrdy
// Bit[6] dblk_hcmd_srdy
// Bit[5] dblk_cmd_if_ready
// Bit[4] dblk_hcmd_mv_available
// Bit[3:0] dblk_cmd_if_state
// h264_mv_cal_info_1 -- (index == 5)
//  Bit[31:29] Reserved
//  Bit[28:24] total_mvd_num_l0
//  Bit[23:21] Reserved
//  Bit[20:16] mv_cal_ptr_l0
//  Bit[15:13] Reserved
//  Bit[12:8] mc_hcmd_ptr_l0
//  Bit[7:5] Reserved
//  Bit[4:0] dblk_hcmd_ptr_l0
// h264_mv_cal_info_2 -- (index == 6)
//  Bit[31:29] Reserved
//  Bit[28:24] total_mvd_num_l1
//  Bit[23:21] Reserved
//  Bit[20:16] mv_cal_ptr_l1
//  Bit[15:13] Reserved
//  Bit[12:8] mc_hcmd_ptr_l1
//  Bit[7:5] Reserved
//  Bit[4:0] dblk_hcmd_ptr_l1
// h264_co_mb_info -- (index == 7)
// Bit[31:26] Reserved
// Bit[25] mv_scale_cal_busy
// Bit[24:20] co_mv_count
// Bit[19:16] co_mv_process_state
// Bit[15] h264_co_mb_rd_busy
// Bit[15] h264_co_mb_rd_ready
// Bit[13:12] co_mv_transfer_block_cnt
// Bit[11:8] co_mv_transfer_ptr
// Bit[7] co_mv_POC_l1_busy
// Bit[6] h264_weight_scale_cal_en
// Bit[5] weight_cal_busy
// Bit[4] weight_cal_not_finished
// Bit[3:0] weight_process_state
#define VLD_DBG_DATA                               ((0x0c3f  << 2) + 0xff620000)
// --------------------------------------------
// VIFIFO DDR Interface
// --------------------------------------------
// The VIFIFO start pointer into DDR memory is a 32-bit number
// The Start pointer will automatically be truncated to land on
// an 8-byte boundary.  That is, bits [2:0] = 0;
#define VLD_MEM_VIFIFO_START_PTR                   ((0x0c40  << 2) + 0xff620000)
// The current pointer points so some location between the START and END
// pointers.  The current pointer is a BYTE pointer.  That is, you can
// point to any BYTE address within the START/END range
#define VLD_MEM_VIFIFO_CURR_PTR                    ((0x0c41  << 2) + 0xff620000)
#define VLD_MEM_VIFIFO_END_PTR                     ((0x0c42  << 2) + 0xff620000)
#define VLD_MEM_VIFIFO_BYTES_AVAIL                 ((0x0c43  << 2) + 0xff620000)
// VIFIFO FIFO Control
// bit  [31:24] viff_empty_int_enable_cpu[7:0]
// bit  [23:16] viff_empty_int_enable_amrisc[7:0]
//   -bit 23 Video BUFFER < 0x400 Bytes
//   -bit 22 Video BUFFER < 0x200 Bytes
//   -bit 21 Video BUFFER < 0x100 Bytes
//   -bit 20 Video BUFFER < 0x80 Bytes
//   -bit 19 Video BUFFER < 0x40 Bytes
//   -bit 18 Video BUFFER < 0x20 Bytes
//   -bit 17 vififo  < 16 double words
//   -bit 16 vififo  < 8 double words
// bit  [15:13] unused
// bit  [12]    A_urgent
// bit  [11]    transfer_length 0 - 32x64 Bits per request, 1 - 16x64 Bits per request
// bit  [10]    use_level       Set this bit to 1 to enable filling of the FIFO controlled by the buffer
//                              level control.  If this bit is 0, then use bit[1] to control the enabling of filling
// bit  [9]     Data Ready.     This bit is set when data can be popped
// bit  [8]     fill busy       This bit will be high when we're fetching data from the DDR memory
//                              To reset this module, set cntl_enable = 0, and then wait for busy = 0.
//                              After that you can pulse cntl_init to start over
// bit  [7]     init_with_cntl_init
// bit  [6]     reserved
// bits [5:3]   endian:         see $lib/rtl/ddr_endian.v
// bit  [2]     cntl_empty_en   Set to 1 to enable reading the DDR memory FIFO
//                              Set cntl_empty_en = cntl_fill_en = 0 when pulsing cntl_init
// bit  [1]     cntl_fill_en    Set to 1 to enable reading data from DDR memory
// bit  [0]     cntl_init:      After setting the read pointers, sizes, channel masks
//                              and read masks, set this bit to 1 and then to 0
//                              NOTE:  You don't need to pulse cntl_init if only the start address is
//                              being changed
#define VLD_MEM_VIFIFO_CONTROL                     ((0x0c44  << 2) + 0xff620000)
// --------------------------------------------
// VIFIFO Buffer Level Manager
// --------------------------------------------
#define VLD_MEM_VIFIFO_WP                          ((0x0c45  << 2) + 0xff620000)
#define VLD_MEM_VIFIFO_RP                          ((0x0c46  << 2) + 0xff620000)
#define VLD_MEM_VIFIFO_LEVEL                       ((0x0c47  << 2) + 0xff620000)
//
// bit  [8]     use_parser_video2_wp
// bit  [7]     vbuf2_out_manual
// bit  [6]     vbuf_out_manual
// bit  [5]     empty (ReadOnly)
// bit  [4]     full (ReadOnly)
// bit  [3:2]   reserved
// bit  [1]     manual mode     Set to 1 for manual write pointer mode
// bit  [0]     Init            Set high then low after everything has been initialized
#define VLD_MEM_VIFIFO_BUF_CNTL                    ((0x0c48  << 2) + 0xff620000)
// bit 31:16 -- drop_bytes
// bit 15:14 -- drop_status (Read-Only)
// bit 13:12 -- sync_match_position (Read-Only)
// bit 11:6 -- reserved
// bit 5:4 -- TIME_STAMP_NUMBER, 0-32bits, 1-64bits, 2-96bits, 3-128bits
// bit 3 -- stamp_soft_reset
// bit 2 -- TIME_STAMP_length_enable
// bit 1 -- TIME_STAMP_sync64_enable
// bit 0 -- TIME_STAMP_enable
#define VLD_TIME_STAMP_CNTL                        ((0x0c49  << 2) + 0xff620000)
// bit 31:0 -- TIME_STAMP_SYNC_CODE_0
#define VLD_TIME_STAMP_SYNC_0                      ((0x0c4a  << 2) + 0xff620000)
// bit 31:0 -- TIME_STAMP_SYNC_CODE_1
#define VLD_TIME_STAMP_SYNC_1                      ((0x0c4b  << 2) + 0xff620000)
// bit 31:0 TIME_STAMP_0
#define VLD_TIME_STAMP_0                           ((0x0c4c  << 2) + 0xff620000)
// bit 31:0 TIME_STAMP_1
#define VLD_TIME_STAMP_1                           ((0x0c4d  << 2) + 0xff620000)
// bit 31:0 TIME_STAMP_2
#define VLD_TIME_STAMP_2                           ((0x0c4e  << 2) + 0xff620000)
// bit 31:0 TIME_STAMP_3
#define VLD_TIME_STAMP_3                           ((0x0c4f  << 2) + 0xff620000)
// bit 31:0 TIME_STAMP_LENGTH
#define VLD_TIME_STAMP_LENGTH                      ((0x0c50  << 2) + 0xff620000)
// bit 15:0 vififo_rd_count
#define VLD_MEM_VIFIFO_WRAP_COUNT                  ((0x0c51  << 2) + 0xff620000)
// bit 29:24 A_brst_num
// bit 21:16 A_id
// bit 15:0 level_hold
#define VLD_MEM_VIFIFO_MEM_CTL                     ((0x0c52  << 2) + 0xff620000)
#define VLD_MEM_VBUF_RD_PTR                        ((0x0c53  << 2) + 0xff620000)
#define VLD_MEM_VBUF2_RD_PTR                       ((0x0c54  << 2) + 0xff620000)
#define VLD_MEM_SWAP_ADDR                          ((0x0c55  << 2) + 0xff620000)
// bit[23:16] - swap_d_count (Read Only)
// bit[15:8]  - swap_a_count (Read Only)
// bit [7] - swap busy (Read Only)
// bit [6:2] - reserved
// bit [1] - 1 - STORE to Memory, 0 - LOAD from Memory
// bit [0] - swap active
#define VLD_MEM_SWAP_CTL                           ((0x0c56  << 2) + 0xff620000)
//
// Closing file:  vld_regs.h
//
//------------------------------------------------------------------------------
// IQ/IDCT module level register offset
//------------------------------------------------------------------------------
//
// Reading file:  iqidct_regs.h
//
//========================================================================
//  IQ/IDCT module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_VDEC_IQIDCT_CBUS_BASE = 0x0e
// -----------------------------------------------
#define VCOP_CTRL_REG                              ((0x0e00  << 2) + 0xff620000)
#define QP_CTRL_REG                                ((0x0e01  << 2) + 0xff620000)
#define INTRA_QUANT_MATRIX                         ((0x0e02  << 2) + 0xff620000)
#define NON_I_QUANT_MATRIX                         ((0x0e03  << 2) + 0xff620000)
#define DC_SCALER                                  ((0x0e04  << 2) + 0xff620000)
#define DC_AC_CTRL                                 ((0x0e05  << 2) + 0xff620000)
// `define RV_AI_CTRL          8'h05  // ONLY for $ucode/real/amrisc/rv.s reg value from apollo
#define DC_AC_SCALE_MUL                            ((0x0e06  << 2) + 0xff620000)
#define DC_AC_SCALE_DIV                            ((0x0e07  << 2) + 0xff620000)
// `define DC_AC_SCALE_RESULT  8'h06
// `define RESERVED_E07        8'h07
#define POWER_CTL_IQIDCT                           ((0x0e08  << 2) + 0xff620000)
#define RV_AI_Y_X                                  ((0x0e09  << 2) + 0xff620000)
#define RV_AI_U_X                                  ((0x0e0a  << 2) + 0xff620000)
#define RV_AI_V_X                                  ((0x0e0b  << 2) + 0xff620000)
// bit 15:0 will count up when rv_ai_mb finished when non zero
// and rv_ai_mb_finished_int will be generate when this is not zero
#define RV_AI_MB_COUNT                             ((0x0e0c  << 2) + 0xff620000)
// For H264 I in PB picture Use -- dma type : h264_next_intra_dma
#define NEXT_INTRA_DMA_ADDRESS                     ((0x0e0d  << 2) + 0xff620000)
// Bit 16 -- dcac_dma_read_cache_disable
// Bit 15 -- dcac_dma_urgent
// Bit 14 -- nv21_swap
// Bit 13 -- nv21_top_dma
// Bit 12 -- reset_rv_ai_wait_rd_data
// Bit 11 -- set_rv_ai_wait_rd_data [12:11] = 3 means only dec 1 (For Skipped MB of MBAFF)
// Bit 10 -- rv_ai_wait_rd_data (Read Only)
// Bit 9 -- enable_rv_ai_wait_rd_data
// Bit 8 -- disable_vc1_mv_update
// Bit 7 -- pred_dc_signed
// Bit 6 -- inc_vld_ready_count
// Bit 5 -- dec_vld_ready_count
// Bit 4 -- disable_ref_bidir_fix
// Bit 3 -- disable_MV_UL_l1_bot_fix
// Bit 2 -- disable_mb_aff_fix
// Bit 1 -- canvas_addr_7
// Bit 0 -- constrained_intra_pred_flag for H264
#define IQIDCT_CONTROL                             ((0x0e0e  << 2) + 0xff620000)
// Bit[31:19] Reserved
// Bit[18] iq_waiting
// Bit[17] iq_om_wr_idx
// Bit[16] iq_om_rd_idx
// Bit[15] iq_om_busy
// Bit[14] iq_om_2_busy
// Bit[13] idx_fifo_0
// Bit[12] idx_fifo_1
// Bit[11] idx_fifo_2
// Bit[10] idx_fifo_3
// Bit[9] idx_fifo_4
// Bit[8] idx_fifo_5
// Bit[7] idx_fifo_6
// Bit[6] idx_fifo_7
// Bit[5:3] idx_fifo_wp
// Bit[2:0] idx_fifo_rp
#define IQIDCT_DEBUG_INFO_0                        ((0x0e0f  << 2) + 0xff620000)
// For RTL Simulation Only
#define DEBLK_CMD                                  ((0x0e10  << 2) + 0xff620000)
// Bit[15+16] ds_mc_valid_2
// Bit[14+16] new_idct1_rd_idx_2
// Bit[13+16] new_idct1_wr_idx_2
// Bit[12+16] idct1_buff0_busy_2
// Bit[11+16] idct1_buff1_busy_2
// Bit[10+16] new_idct1_busy_2
// Bit[9+16] iq_om_8val_2
// Bit[8+16] idct1_pipe_busy_2
// Bit[7+16] wait_mb_left_finish_hold_2
// Bit[6+16] new_idct2_rd_idx_2
// Bit[5+16] new_idct2_wr_idx_2
// Bit[4+16] idct2_buff0_busy_2
// Bit[3+16] idct2_buff1_busy_2
// Bit[2+16] idct2_en_2
// Bit[1+16] new_idct2_busy_2
// Bit[0+16] new_idct1_ready_2
// Bit[15] ds_mc_valid_1
// Bit[14] new_idct1_rd_idx_1
// Bit[13] new_idct1_wr_idx_1
// Bit[12] idct1_buff0_busy_1
// Bit[11] idct1_buff1_busy_1
// Bit[10] new_idct1_busy_1
// Bit[9] iq_om_8val_1
// Bit[8] idct1_pipe_busy_1
// Bit[7] wait_mb_left_finish_hold_1
// Bit[6] new_idct2_rd_idx_1
// Bit[5] new_idct2_wr_idx_1
// Bit[4] idct2_buff0_busy_1
// Bit[3] idct2_buff1_busy_1
// Bit[2] idct2_en_1
// Bit[1] new_idct2_busy_1
// Bit[0] new_idct1_ready_1
#define IQIDCT_DEBUG_IDCT                          ((0x0e11  << 2) + 0xff620000)
// bit 31 -- convas_enable
// bit 30:24 -- convas_x_count ( 8 pixels / 64 bits )
// bit 23:16 -- convas_y_count
// bit 15   -- dcac_dma_busy
// bit 14   -- dcac_dma_read_cache_active
// bit 13:8 -- dcac_dma_count
// bit 7    -- dcac_dma_rw
// bit 6    -- dcac_skip_read_mode
// bit 5:0  -- dcac_dma_offset
#define DCAC_DMA_CTRL                              ((0x0e12  << 2) + 0xff620000)
// when (convas_enable == 0 )
//   bit 31:0 dcac_dma_addr
// when (convas_enable == 1 )
//   bit 31:25 canvas_addr (7 bits)
//   bit 24:12 convas_y_start ( 13 btis )
//   bit 11:0  convas_x_start ( 12 btis )
#define DCAC_DMA_ADDRESS                           ((0x0e13  << 2) + 0xff620000)
// bit 7:0 -- dcac_cpu_addr
#define DCAC_CPU_ADDRESS                           ((0x0e14  << 2) + 0xff620000)
// bit 31:0 -- dcac_cpu_data
#define DCAC_CPU_DATA                              ((0x0e15  << 2) + 0xff620000)
// bit 31:19 -- reserved
// bit 18:16 -- block_num_reg -- Read-Only
// bit 15:0 -- dcac_mb_count
#define DCAC_MB_COUNT                              ((0x0e16  << 2) + 0xff620000)
// bit 31:18 -- reserved
// For H264 :
//   bit 17:2 -- h264_quant
//   bit 11:6 -- h264_quant_c
//   bit  5:0 -- h264_quant_c
// For VC1 :
//   bit    17 -- qindex_GT_8
//   bit    16 -- HalfQPStep
//   bit 15:12 -- eQuantMode
//   bit 11:6  -- AltPQuant
//   bit  5:0  -- PQuant
//
#define IQ_QUANT                                   ((0x0e17  << 2) + 0xff620000)
// bit 31:24  -- bitplane_width
// bit 23:16  -- bitplane_height
// bit 15:14  -- bitplane_start_x
// bit 13:12  -- bitplane_start_y
// bit 11:4   -- reserved
// bit 3:1    -- bitplane_type
// bit 0      -- bitplane_busy
#define VC1_BITPLANE_CTL                           ((0x0e18  << 2) + 0xff620000)
// bit 24:16  -- wq_param1
// bit  8: 0  -- wq_param0
#define AVSP_IQ_WQ_PARAM_01                        ((0x0e19  << 2) + 0xff620000)
// bit 24:16  -- wq_param3
// bit  8: 0  -- wq_param2
#define AVSP_IQ_WQ_PARAM_23                        ((0x0e1a  << 2) + 0xff620000)
// bit 24:16  -- wq_param5
// bit  8: 0  -- wq_param4
#define AVSP_IQ_WQ_PARAM_45                        ((0x0e1b  << 2) + 0xff620000)
// bit    31  -- weight_quant_en
// bit 17:16  -- current_scene_model
// bit 12: 8  -- chroma_qp_delta_cr
// bit  4: 0  -- chroma_qp_delta_cb
#define AVSP_IQ_CTL                                ((0x0e1c  << 2) + 0xff620000)
    #define RAM_TEST_CMD        0x002
    #define RAM_TEST_ADDR       0x003
    #define RAM_TEST_DATAH      0x004
    #define RAM_TEST_DATAL      0x005

    #define RAM_TEST_RD_CMD	    0x0000
    #define RAM_TEST_WR_CMD	    0x8000
    #define IDCT_TM2_PT0	    0x0001
    #define IDCT_TM2_PT1	    0x0002
    #define IDCT_TM1_PT0	    0x0004
    #define IDCT_TM1_PT1	    0x0008
    #define IQ_OMEM_PT0	        0x0010
    #define IQ_OMEM_PT1	        0x0020
    #define MC_IMEM_PT0	        0x0040
    #define ALL_RAM_PTS	        0x007f
//======================================
//  VCOP Control Register Bits
//
//======================================
    //`define IQIDCT_RESET	    16'h0001	    // Bit 0
    #define QM_WEN		    0x0002	    // Bit 1
    #define IQIDCT_ENABLE	    0x0004	    // Bit 2
    #define INTRA_QM	    0x0008	    // Bit 3	0 = Use default; 1 = use loaded
    #define NINTRA_QM	    0x0010	    // Bit 4	0 = Use default; 1 = use loaded
//======================================
//  QP Control Register Bits
//
//======================================
    #define INTRA_MODE	    0x0080	    // Bit 7
// Duplicate Address:  When actually used
// please move to a different address
// `define FLD_DCT_TYPE	    16'h0100	    // Bit 8	0 = Frame DCT; 1 = field DCT
//
// Closing file:  iqidct_regs.h
//
//------------------------------------------------------------------------------
// VCPU module level register offset
//------------------------------------------------------------------------------
//
// Reading file:  vcpu_regs.h
//
//========================================================================
//  VCPU module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_VDEC_VCPU_CBUS_BASE = 0x03
// -----------------------------------------------
#define MSP                                        ((0x0300  << 2) + 0xff620000)
#define MPSR                                       ((0x0301  << 2) + 0xff620000)
#define MINT_VEC_BASE                              ((0x0302  << 2) + 0xff620000)
#define MCPU_INTR_GRP                              ((0x0303  << 2) + 0xff620000)
#define MCPU_INTR_MSK                              ((0x0304  << 2) + 0xff620000)
#define MCPU_INTR_REQ                              ((0x0305  << 2) + 0xff620000)
#define MPC_P                                      ((0x0306  << 2) + 0xff620000)
#define MPC_D                                      ((0x0307  << 2) + 0xff620000)
#define MPC_E                                      ((0x0308  << 2) + 0xff620000)
#define MPC_W                                      ((0x0309  << 2) + 0xff620000)
#define MINDEX0_REG                                ((0x030a  << 2) + 0xff620000)
#define MINDEX1_REG                                ((0x030b  << 2) + 0xff620000)
#define MINDEX2_REG                                ((0x030c  << 2) + 0xff620000)
#define MINDEX3_REG                                ((0x030d  << 2) + 0xff620000)
#define MINDEX4_REG                                ((0x030e  << 2) + 0xff620000)
#define MINDEX5_REG                                ((0x030f  << 2) + 0xff620000)
#define MINDEX6_REG                                ((0x0310  << 2) + 0xff620000)
#define MINDEX7_REG                                ((0x0311  << 2) + 0xff620000)
#define MMIN_REG                                   ((0x0312  << 2) + 0xff620000)
#define MMAX_REG                                   ((0x0313  << 2) + 0xff620000)
#define MBREAK0_REG                                ((0x0314  << 2) + 0xff620000)
#define MBREAK1_REG                                ((0x0315  << 2) + 0xff620000)
#define MBREAK2_REG                                ((0x0316  << 2) + 0xff620000)
#define MBREAK3_REG                                ((0x0317  << 2) + 0xff620000)
#define MBREAK_TYPE                                ((0x0318  << 2) + 0xff620000)
#define MBREAK_CTRL                                ((0x0319  << 2) + 0xff620000)
#define MBREAK_STAUTS                              ((0x031a  << 2) + 0xff620000)
#define MDB_ADDR_REG                               ((0x031b  << 2) + 0xff620000)
#define MDB_DATA_REG                               ((0x031c  << 2) + 0xff620000)
#define MDB_CTRL                                   ((0x031d  << 2) + 0xff620000)
#define MSFTINT0                                   ((0x031e  << 2) + 0xff620000)
#define MSFTINT1                                   ((0x031f  << 2) + 0xff620000)
#define CSP                                        ((0x0320  << 2) + 0xff620000)
#define CPSR                                       ((0x0321  << 2) + 0xff620000)
#define CINT_VEC_BASE                              ((0x0322  << 2) + 0xff620000)
#define CCPU_INTR_GRP                              ((0x0323  << 2) + 0xff620000)
#define CCPU_INTR_MSK                              ((0x0324  << 2) + 0xff620000)
#define CCPU_INTR_REQ                              ((0x0325  << 2) + 0xff620000)
#define CPC_P                                      ((0x0326  << 2) + 0xff620000)
#define CPC_D                                      ((0x0327  << 2) + 0xff620000)
#define CPC_E                                      ((0x0328  << 2) + 0xff620000)
#define CPC_W                                      ((0x0329  << 2) + 0xff620000)
#define CINDEX0_REG                                ((0x032a  << 2) + 0xff620000)
#define CINDEX1_REG                                ((0x032b  << 2) + 0xff620000)
#define CINDEX2_REG                                ((0x032c  << 2) + 0xff620000)
#define CINDEX3_REG                                ((0x032d  << 2) + 0xff620000)
#define CINDEX4_REG                                ((0x032e  << 2) + 0xff620000)
#define CINDEX5_REG                                ((0x032f  << 2) + 0xff620000)
#define CINDEX6_REG                                ((0x0330  << 2) + 0xff620000)
#define CINDEX7_REG                                ((0x0331  << 2) + 0xff620000)
#define CMIN_REG                                   ((0x0332  << 2) + 0xff620000)
#define CMAX_REG                                   ((0x0333  << 2) + 0xff620000)
#define CBREAK0_REG                                ((0x0334  << 2) + 0xff620000)
#define CBREAK1_REG                                ((0x0335  << 2) + 0xff620000)
#define CBREAK2_REG                                ((0x0336  << 2) + 0xff620000)
#define CBREAK3_REG                                ((0x0337  << 2) + 0xff620000)
#define CBREAK_TYPE                                ((0x0338  << 2) + 0xff620000)
#define CBREAK_CTRL                                ((0x0339  << 2) + 0xff620000)
#define CBREAK_STAUTS                              ((0x033a  << 2) + 0xff620000)
#define CDB_ADDR_REG                               ((0x033b  << 2) + 0xff620000)
#define CDB_DATA_REG                               ((0x033c  << 2) + 0xff620000)
#define CDB_CTRL                                   ((0x033d  << 2) + 0xff620000)
#define CSFTINT0                                   ((0x033e  << 2) + 0xff620000)
#define CSFTINT1                                   ((0x033f  << 2) + 0xff620000)
#define IMEM_DMA_CTRL                              ((0x0340  << 2) + 0xff620000)
#define IMEM_DMA_ADR                               ((0x0341  << 2) + 0xff620000)
#define IMEM_DMA_COUNT                             ((0x0342  << 2) + 0xff620000)
// bit[29:24] A_brst_num_imem
// bit[21:16] A_id_imem
// bit[11:0] wrrsp_count_imem (reserved)
#define WRRSP_IMEM                                 ((0x0343  << 2) + 0xff620000)
#define LMEM_DMA_CTRL                              ((0x0350  << 2) + 0xff620000)
#define LMEM_DMA_ADR                               ((0x0351  << 2) + 0xff620000)
#define LMEM_DMA_COUNT                             ((0x0352  << 2) + 0xff620000)
// bit[29:24] A_brst_num_lmem
// bit[21:16] A_id_lmem
// bit[11:0] wrrsp_count_lmem
#define WRRSP_LMEM                                 ((0x0353  << 2) + 0xff620000)
#define MAC_CTRL1                                  ((0x0360  << 2) + 0xff620000)
#define ACC0REG1                                   ((0x0361  << 2) + 0xff620000)
#define ACC1REG1                                   ((0x0362  << 2) + 0xff620000)
#define MAC_CTRL2                                  ((0x0370  << 2) + 0xff620000)
#define ACC0REG2                                   ((0x0371  << 2) + 0xff620000)
#define ACC1REG2                                   ((0x0372  << 2) + 0xff620000)
#define CPU_TRACE                                  ((0x0380  << 2) + 0xff620000)
//
// Closing file:  vcpu_regs.h
//
//------------------------------------------------------------------------------
// HENC module level register offset
//------------------------------------------------------------------------------
//
// Reading file:  henc_regs.h
//
//========================================================================
//  MDEC module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_HCODEC_HENC_CBUS_BASE = 0x0a
// -----------------------------------------------
#define HENC_SCRATCH_0                             ((0x1ac0  << 2) + 0xff620000)
#define HENC_SCRATCH_1                             ((0x1ac1  << 2) + 0xff620000)
#define HENC_SCRATCH_2                             ((0x1ac2  << 2) + 0xff620000)
#define HENC_SCRATCH_3                             ((0x1ac3  << 2) + 0xff620000)
#define HENC_SCRATCH_4                             ((0x1ac4  << 2) + 0xff620000)
#define HENC_SCRATCH_5                             ((0x1ac5  << 2) + 0xff620000)
#define HENC_SCRATCH_6                             ((0x1ac6  << 2) + 0xff620000)
#define HENC_SCRATCH_7                             ((0x1ac7  << 2) + 0xff620000)
#define HENC_SCRATCH_8                             ((0x1ac8  << 2) + 0xff620000)
#define HENC_SCRATCH_9                             ((0x1ac9  << 2) + 0xff620000)
#define HENC_SCRATCH_A                             ((0x1aca  << 2) + 0xff620000)
#define HENC_SCRATCH_B                             ((0x1acb  << 2) + 0xff620000)
#define HENC_SCRATCH_C                             ((0x1acc  << 2) + 0xff620000)
#define HENC_SCRATCH_D                             ((0x1acd  << 2) + 0xff620000)
#define HENC_SCRATCH_E                             ((0x1ace  << 2) + 0xff620000)
#define HENC_SCRATCH_F                             ((0x1acf  << 2) + 0xff620000)
#define HENC_SCRATCH_G                             ((0x1ad0  << 2) + 0xff620000)
#define HENC_SCRATCH_H                             ((0x1ad1  << 2) + 0xff620000)
#define HENC_SCRATCH_I                             ((0x1ad2  << 2) + 0xff620000)
#define HENC_SCRATCH_J                             ((0x1ad3  << 2) + 0xff620000)
#define HENC_SCRATCH_K                             ((0x1ad4  << 2) + 0xff620000)
#define HENC_SCRATCH_L                             ((0x1ad5  << 2) + 0xff620000)
#define HENC_SCRATCH_M                             ((0x1ad6  << 2) + 0xff620000)
#define HENC_SCRATCH_N                             ((0x1ad7  << 2) + 0xff620000)
// bit [7:0] data_feed_buff_id
#define IE_DATA_FEED_BUFF_INFO                     ((0x1ad8  << 2) + 0xff620000)
//
// Closing file:  henc_regs.h
//
//------------------------------------------------------------------------------
// VLC module level register offset
//------------------------------------------------------------------------------
//
// Reading file:  vlc_regs.h
//
//========================================================================
//  VLC module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_HCODEC_VLC_CBUS_BASE = 0x0d
// -----------------------------------------------
// Bit[31:28] - henc_status
// Bit[27:8] - reserved
// Bit[7]    mc_hcmd_buff_enable
// Bit[6]    mc_hcmd_use_mc_hcmd_buff
// Bit[5]    mc_hcmd_use_mc_hcmd_hw_start
// Bit[4]    no_mc_out_null_non_skipped_mb
// Bit[3]    mc_out_even_skipped_mb
// Bit[2] - hcmd_enable
// Bit[1] - vlc_control_enable (0 will treat as soft_reset)
// Bit[0] - vlc_input_enable (enable input interface)
#define VLC_STATUS_CTRL                            ((0x1d00  << 2) + 0xff620000)
// Bit [31]  - small_luma_ignore_chroma
// Bit[30:16] - Reserved
// Bit [15]  - enable_free_clk_mc_hcmd_buff
// Bit [14]  - enable_free_clk_reg
// Bit [13]  - enable_free_clk_stream
// Bit [12]  - enable_free_clk_pre_buff
// Bit [11]  - enable_free_clk_vb_buff
// Bit [10]  - enable_free_clk_dc_input
// Bit [9]   - enable_free_clk_input
// Bit [8]   - enable_free_clk_mv_cal
// Bit [7]   - enable_free_clk_status
// Bit [6]   - enable_free_clk_mc_dblk_cmd_if
// Bit [5]   - disable_mvd_enc_finished
// Bit [4]   - I16MB_share_ipred_mode_with_I4MB
// Bit [3]   - fixed_picture_qp
// Bit [2]   - use_set_b8_mode ( not used now)
// Bit [1]   - use_set_mb_skip_run
// Bit [0]   - pop_coeff_even_all_zero
#define VLC_CONFIG                                 ((0x1d01  << 2) + 0xff620000)
// --------------------------------------------
// Bitstream DDR Interface
// --------------------------------------------
#define VLC_VB_START_PTR                           ((0x1d10  << 2) + 0xff620000)
#define VLC_VB_END_PTR                             ((0x1d11  << 2) + 0xff620000)
#define VLC_VB_WR_PTR                              ((0x1d12  << 2) + 0xff620000)
// Read Only, VLC_VB_SW_RD_PTR or VLC_VB_HW_RD_PTR
#define VLC_VB_RD_PTR                              ((0x1d13  << 2) + 0xff620000)
#define VLC_VB_SW_RD_PTR                           ((0x1d14  << 2) + 0xff620000)
// Read Only
#define VLC_VB_LEFT                                ((0x1d15  << 2) + 0xff620000)
// VB FIFO Control
// bit  [31:24] vb_full_int_enable_cpu[7:0]
// bit  [23:16] vb_full_int_enable_amrisc[7:0]
//   -bit 23 Video BUFFER LEFT < 0x400 Bytes
//   -bit 22 Video BUFFER LEFT < 0x200 Bytes
//   -bit 21 Video BUFFER LEFT < 0x100 Bytes
//   -bit 20 Video BUFFER LEFT < 0x80 Bytes
//   -bit 19 Video BUFFER LEFT < 0x40 Bytes
//   -bit 18 Video BUFFER LEFT < 0x20 Bytes
//   -bit 17 vbfifo left  < 16 double words (8x64bits)
//   -bit 16 vbfifo left  < 8 double words (4x64bits)
// bit  [15]    wr_ptr_int_enable_cpu
// bit  [14]    wr_ptr_int_enable_amrisc
// bit  [13]    wr_ptr_int (Read Only, write 1 will clear)
// bit  [12]    vb_full_int_enable_cpu(Read Only)
// bit  [11]    vb_full_int_enable_amrisc(Read Only)
// bit  [10]    reserved
// bit  [9]     use_vb_hw_rd_ptr
// bit  [8]     vb_always_ready Set to 1 to ignore vb_level blocking DDR write
// bit  [7]     vb_ready_for_transfer (Read Only)
// bit  [6]     data_ready_for_transfer (Read Only)
// bits [5:3]   vb_endian       Set VB Endian inside DDR memory
// bit  [2]     vb_write_busy   Read Only - indicate DDR write busy
// bit  [1]     vb_write_en     Set to 1 to enable writing data to DDR memory
// bit  [0]     vb_soft_reset   Soft reset
#define VLC_VB_CONTROL                             ((0x1d16  << 2) + 0xff620000)
// bit 31    transfer_length 0 - 32x64 Bits per request, 1 - 16x64 Bits per request  // default : 0
// bit 30    A_urgent  // default : 0
// bit 29:24 A_brst_num // default : 0x3f
// bit 23:22 reserved
// bit 21:16 A_id  // default : 0x20
// bit 15:0  vb_left_hold // default : 0
#define VLC_VB_MEM_CTL                             ((0x1d17  << 2) + 0xff620000)
// vb_wr_ptr address to generate interrupt
#define VLC_VB_INT_PTR                             ((0x1d18  << 2) + 0xff620000)
// bit[31:12] reserved
// bit[11:0] vlc_wrrsp_count
#define VLC_WRRSP                                  ((0x1d19  << 2) + 0xff620000)
#define VLC_TOTAL_BYTES                            ((0x1d1a  << 2) + 0xff620000)
// bit  [31:26] reserved
// bit  [25]    vb_flush
// bit  [24]    vb_reg_ready
// bit  [23:16] vb_buff_left     -- Read only
// bit  [15:8]  vb_buff_wr_point -- RW
// bit  [7:0]   vb_buff_rd_point -- RW
#define VLC_VB_BUFF                                ((0x1d1b  << 2) + 0xff620000)
// bit[31]    flush_vlc_pre_buff
// bit[30:27] reserved
// bit[26:24] vb_pre_buff_level
// bit[23:0]  vb_pre_buff_data[55:32]
#define VLC_VB_PRE_BUFF_HI                         ((0x1d1c  << 2) + 0xff620000)
// bit[31:0] vb_pre_buff_data[31:0]
#define VLC_VB_PRE_BUFF_LOW                        ((0x1d1d  << 2) + 0xff620000)
// bit[31]    stream_encap_enable  // 0x0000(00-03) will be changed to 0x000003(00-03) if enabled
// bit[30:29] stream_encap_delay   // delay bytes for encap used
// bit[28:24] stream_buff_point
// bit[23:0]  stream_buff_data
#define VLC_STREAM_BUFF                            ((0x1d1e  << 2) + 0xff620000)
// bit[31]    push_stream_block - Read Only (Will set if vb_buff full)
// bit[30]    push_stream_busy  - Read Only (busy when output one byte from stream_buf (max 2 clocks for 8 bits push)
// bit[29:28] stream_encap_status - Read Only
// bit[27:21] reserved
// Long Mode : (Amrisc need movilo and mvihi high to set stream_info)
//   bit[20:16] push_stream_long_length (0 or 31 : Mid or Short mode)
//   bit[15:0]  push_stream_data
// Mid Mode : (Amrisc need movi to set stream_info)
//   bit[15:12]] push_stream_mid_length (1-12 : mid mode active, 0-short mode, 15 - byte align)
//   bit[11:0]  push_stream_data
// Short Mode : (Amrisc can use mtspi to push stream directely)
//   bit[7:5] push_stream_short_length (0-5 : short length, else - invalid)
//   bit[4:0]  push_stream_data
#define VLC_PUSH_STREAM                            ((0x1d1f  << 2) + 0xff620000)
// bit[15:8] ELEMENT_LENGTH
// bit[7:1]  reserved
// bit[0]  Write - push start, Read - Push Busy
#define VLC_PUSH_ELEMENT                           ((0x1d20  << 2) + 0xff620000)
#define VLC_ELEMENT_DATA                           ((0x1d21  << 2) + 0xff620000)
// bit[7] hcmd_intra_use_sw_info
// bit[6] hcmd_use_sw_info
// bit[5] always_use_info_0_cbp_blk
// bit[4] always_update_info_0_cbp_blk
// bit[3] reset_left_mb_wr
// bit[2] reset_top_mb_wr
// bit[1] set_left_mb_wr
// bit[0] set_top_mb_wr
#define VLC_SPECIAL_CTL                            ((0x1d22  << 2) + 0xff620000)
// bit[28]    left_intra
// bit[27:22] left_quant
// bit[21:16] left_quant_c
// bit[12]    top_intra
// bit[11:6]  top_quant
// bit[5:0]   top_quant_c
#define VLC_HCMD_T_L_INFO                          ((0x1d23  << 2) + 0xff620000)
// bit[12]    cur_intra
// bit[11:6]  cur_quant
// bit[5:0]   cur_quant_c
#define VLC_HCMD_CUR_INFO                          ((0x1d24  << 2) + 0xff620000)
// bit[13]    top_left_info_in_data_mv_cal
// bit[12]    only_use_info_0_top_left_in_I
// bit[11]    top_left_info_in_data
// bit[10]    early_mix_mc_hcmd
// bit[9]     update_top_left_mix
// bit[8]     p_top_left_mix
// bit[7]     mv_cal_mixed_type
// bit[6]     mc_hcmd_mixed_type
// bit[5]     use_seperate_int_control
// bit[4]     hcmd_intra_use_q_info
// bit[3]     hcmd_left_use_prev_info
// bit[2]     hcmd_use_q_info
// bit[1]     use_q_delta_quant
// bit[0]     detect_I16_from_I4
#define VLC_ADV_CONFIG                             ((0x1d25  << 2) + 0xff620000)
//   31 - use_hcmd_mb_xy_auto
//23:16 - hcmd_max_mb_x
//15:8  - hcmd_mb_y_auto
// 7:0  - hcmd_mb_x_auto
#define VLC_HCMD_MBXY_AUTO                         ((0x1d26  << 2) + 0xff620000)
// bit[31:0] vlc_int_control_inter -- will be used when use_seperate_int_control is set
#define VLC_INT_CONTROL_INTER                      ((0x1d2f  << 2) + 0xff620000)
// --------------------------------------------
// Picture VLC
// --------------------------------------------
// (&(int|(~AND_enable))|(|(int&OR_enable)))
// bit[31]    OR interrupt Enable Reserved
// bit[30]    OR interrupt Enable for mv_busy
// bit[29]    OR interrupt Enable for b8_mode_busy
// bit[28]    OR interrupt Enable for mb_skip_run_busy
// bit[27]    OR interrupt Enable for cbp_busy
// bit[26]    OR interrupt Enable for Reserved
// bit[25]    OR interrupt Enable for Reserved
// bit[24]    OR interrupt Enable for mb_info_busy
// bit[23]    AND interrupt Enable Reserved
// bit[22]    AND interrupt Enable for mv_busy
// bit[21]    AND interrupt Enable for b8_mode_busy
// bit[20]    AND interrupt Enable for mb_skip_run_busy
// bit[19]    AND interrupt Enable for cbp_busy
// bit[18]    AND interrupt Enable for Reserved
// bit[17]    AND interrupt Enable for Reserved
// bit[16]    AND interrupt Enable for mb_info_busy
// bit[15]    OR interrupt Enable Reserved
// bit[14]    OR interrupt Enable for mvd
// bit[13]    OR interrupt Enable for b8_mode
// bit[12]    OR interrupt Enable for mb_skip_run
// bit[11]    OR interrupt Enable for cbp_ready
// bit[10]    OR interrupt Enable for c_ipred_mode_ready
// bit[9]     OR interrupt Enable for ipred_mode_ready
// bit[8]     OR interrupt Enable for mb_info_ready
// bit[7]     AND interrupt Enable Reserved
// bit[6]     AND interrupt Enable for mvd
// bit[5]     AND interrupt Enable for b8_mode
// bit[4]     AND interrupt Enable for mb_skip_run
// bit[3]     AND interrupt Enable for cbp_ready
// bit[2]     AND interrupt Enable for c_ipred_mode_ready
// bit[1]     AND interrupt Enable for ipred_mode_ready
// bit[0]     AND interrupt Enable for mb_info_ready
#define VLC_INT_CONTROL                            ((0x1d30  << 2) + 0xff620000)
// Bit[31:16] picture_height
// Bit[15:0]  picture_width
#define VLC_PIC_SIZE                               ((0x1d31  << 2) + 0xff620000)
// [31:16] Reserved
// [15:3] pic_width_in_mbs_minus1
// [2:0]  picture_type
#define VLC_PIC_INFO                               ((0x1d32  << 2) + 0xff620000)
// Bit[31:16] MB_NR
// Bit[15:8] MBY
// Bit[7:0] MBX
#define VLC_PIC_POSITION                           ((0x1d33  << 2) + 0xff620000)
// Bit[31] MV_busy
// Bit[30:6] Reserved
// Bit[15] Reserved
// Bit[14] vlc_input_MV_busy
// Bit[13] vlc_input_b8_mode_busy
// Bit[12] vlc_input_mb_skip_run_busy
// Bit[11] vlc_input_cbp_busy
// Bit[10] Reserved
// Bit[9]  Reserved
// Bit[8] vlc_input_mb_info_busy
// Bit[7] Reserved
// Bit[6] mvd
// Bit[5] b8_mode
// Bit[4] mb_skip_run
// Bit[3] cbp
// Bit[2] c_ipred_mode
// Bit[1] ipred_mode
// Bit[0] mb_info ( mb_type, mb_x, mb_y)
#define VLC_INPUT_STATUS                           ((0x1d34  << 2) + 0xff620000)
// Bit[31:28] detected_mb_type
// Bit[27:16] mb_y
// Bit[15:4]  mb_x
// Bit[3:0]   mb_type
#define VLC_MB_INFO                                ((0x1d35  << 2) + 0xff620000)
// commnad 0 -- no pending
// normal command + 1 is pending command
//
// bit 31:28 -- pending command 7
// bit 27:24 -- pending command 6
// bit 23:20 -- pending command 5
// bit 19:16 -- pending command 4
// bit 15:12 -- pending command 3
// bit 11:8  -- pending command 2
// bit  7:4  -- pending command 1
// bit  3:0  -- pending command 0
#define VLC_ENC_PEND_CMD                           ((0x1d36  << 2) + 0xff620000)
// For I Slice
// Bit[31:16] Reserved
// Bit[15:0] IntraType
#define HENC_TOP_INFO_0                            ((0x1d37  << 2) + 0xff620000)
#define HENC_LEFT_INFO_0                           ((0x1d38  << 2) + 0xff620000)
// For I Slice
// Bit[31:24] V_nnz
// Bit[23:16] U_nnz
// Bit[15:0]  Y_nnz
#define HENC_TOP_INFO_1                            ((0x1d39  << 2) + 0xff620000)
#define HENC_LEFT_INFO_1                           ((0x1d3a  << 2) + 0xff620000)
// bit[63:0] ipred_mode
#define VLC_IPRED_MODE_HI                          ((0x1d3b  << 2) + 0xff620000)
#define VLC_IPRED_MODE_LO                          ((0x1d3c  << 2) + 0xff620000)
// bit[15:8] SE delta quant
// bit[7:0]  UE delta quant
#define VLC_DELTA_QP                               ((0x1d3d  << 2) + 0xff620000)
// bit[31:16] Reserved
// bit[15:12] Reserved
// bit[11:8] c_ipred_mode
// bit[7:0] cbp
#define VLC_MB_HEADER_INFO                         ((0x1d3e  << 2) + 0xff620000)
// bit[31:16] mb_skip_run
// bit[15:0]  b8_mode
#define VLC_P_MB_HEADER_INFO                       ((0x1d3f  << 2) + 0xff620000)
// bit[31]    write_ptr_update
// bit[30]    read_ptr_update
// bit[29:20] coeff_buf_level
// bit[19:10] coeff_buf_write_ptr
// bit[9:0]   coeff_buf_read_ptr
#define VLC_COEFF_BUF_STATUS                       ((0x1d40  << 2) + 0xff620000)
// bit[31:10] Reserved
// bit[9:0] read_req_addr
#define VLC_COEFF_RD_REQ                           ((0x1d41  << 2) + 0xff620000)
// bit[20]   - coeff_buf_read_finished
// bit[19]   - coeff_first
// bit[18:4] - coeff_level
// bit[3:0]  - coeff_run
#define VLC_COEFF                                  ((0x1d42  << 2) + 0xff620000)
// bit[31]    - coeff_info_ready
// bit[30:25] - Reserved
// bit[24:15] - block_begin_addr
// bit[14:11] - trailing_one_sign
// bit[10:6]  - total_coeff
// bit[5:4]   - trailing_ones
// bit[3:0]   - total_zeros
#define VLC_COEFF_INFO                             ((0x1d43  << 2) + 0xff620000)
// bit[31]    write_ptr_update
// bit[30]    read_ptr_update
// bit[29:25] Reserved
// bit[24:20] dc_buf_level -- 0-16
// bit[19:15] Reserved
// bit[14:10] dc_buf_write_ptr
// bit[9:5]   Reserved
// bit[4:0]   dc_buf_read_ptr
#define VLC_DC_BUF_STATUS                          ((0x1d44  << 2) + 0xff620000)
// bit[31:10] Reserved
// bit[9:4]   Reserved
// bit[3:0]   read_req_addr
#define VLC_DC_RD_REQ                              ((0x1d45  << 2) + 0xff620000)
// bit[31:17] - Reserved
// bit[16]   - dc_first
// bit[15:1] - dc_level
// bit[0]    - dc_type  0 - CDC, 1 - LDC
#define VLC_DC                                     ((0x1d46  << 2) + 0xff620000)
// bit[31]    - dc_info_ready
// bit[30:25] - Reserved
// bit[24:20] - Reserved
// bit[19:15] - dc_idx_begin_addr
// bit[14:11] - dc_trailing_one_sign
// bit[10:6]  - dc_total_coeff
// bit[5:4]   - dc_trailing_ones
// bit[3:0]   - dc_total_zeros
#define VLC_DC_INFO                                ((0x1d47  << 2) + 0xff620000)
// bit[31:4]  - Reserved
// bit[3:0]   - mv_rw_idx  (auto increment when read/write VLC_MV)
#define VLC_MV_INDEX                               ((0x1d48  << 2) + 0xff620000)
// bit[31:16] - MVY
// bit[15:0]  - MVX
#define VLC_MV                                     ((0x1d49  << 2) + 0xff620000)
// bit[31:16] - MVY
// bitp15:0]  - MVX
// Write to HENC_TOP_MV_0 will cause previous U->UL, UR->U, and UR write
// Read will read U MV only
#define HENC_TOP_MV_0                              ((0x1d4a  << 2) + 0xff620000)
#define HENC_TOP_MV_1                              ((0x1d4b  << 2) + 0xff620000)
#define HENC_TOP_MV_2                              ((0x1d4c  << 2) + 0xff620000)
#define HENC_TOP_MV_3                              ((0x1d4d  << 2) + 0xff620000)
#define HENC_LEFT_MV_0                             ((0x1d4e  << 2) + 0xff620000)
#define HENC_LEFT_MV_1                             ((0x1d4f  << 2) + 0xff620000)
#define HENC_LEFT_MV_2                             ((0x1d50  << 2) + 0xff620000)
#define HENC_LEFT_MV_3                             ((0x1d51  << 2) + 0xff620000)
// Bit[31:1] Reserved
// Bit[0] top_left_mv_ready
#define TOP_LEFT_READY                             ((0x1d52  << 2) + 0xff620000)
// Bit[31:16] Reserved
// Bit[15:0] mb_skip_run
#define MB_SKIP_RUN                                ((0x1d53  << 2) + 0xff620000)
// Bit[31:16] Reserved
// Bit[15]    Reserved
// Bit[14:13] rd_struct // 00 - frame, 10 - top field, 11 - bottom field
// Bit[12:11] wr_struct // 00 - frame, 10 - top field, 11 - bottom field
// Bit[10:5]  mv_buff_id
// Bit[4:0]   mv_ref
#define VLC_HCMD_CONFIG                            ((0x1d54  << 2) + 0xff620000)
// Bit[9:0] h264_dblk_info
#define VLC_HCMD_DBLK_INFO                         ((0x1d55  << 2) + 0xff620000)
// Bit[3:0] vlc_dbg_idx
#define VLC_DBG_IDX                                ((0x1d56  << 2) + 0xff620000)
// Read Only
#define VLC_DBG_READ                               ((0x1d57  << 2) + 0xff620000)
// [   29] RW jpeg_comp2_ac_table_sel.                                                      Default 0.
// [   28] RW jpeg_comp2_dc_table_sel.                                                      Default 0.
// [26:25] RW jpeg_comp2_cnt_max.                                                           Default 0.
// [   24] RW jpeg_comp2_en. Set 1 if the scan will include component 2 (Cr).               Default 0.
// [   21] RW jpeg_comp1_ac_table_sel.                                                      Default 0.
// [   20] RW jpeg_comp1_dc_table_sel.                                                      Default 0.
// [18:17] RW jpeg_comp1_cnt_max.                                                           Default 0.
// [   16] RW jpeg_comp1_en. Set 1 if the scan will include component 1 (Cb).               Default 0.
// [   13] RW jpeg_comp0_ac_table_sel.                                                      Default 0.
// [   12] RW jpeg_comp0_dc_table_sel.                                                      Default 0.
// [10: 9] RW jpeg_comp0_cnt_max.                                                           Default 0.
// [    8] RW jpeg_comp0_en. Set 1 if the scan will include component 0 (Y).                Default 0.
// [    1] W  jpeg_coeff_init. Write 1 to this bit to initialize JPEG run length encoder.
// [    0] RW jpeg_en. 0=Disable JPEG encoder; 1=Enable JPEG encoder.                       Default 0.
#define VLC_JPEG_CTRL                              ((0x1d58  << 2) + 0xff620000)
// [   13] RW jpeg_coeff_buf_overfl. Write this bit to 1 to clear overfl.
// [   12] RW jpeg_coeff_buf_undrfl. Write this bit to 1 to clear undrfl.
// [   11] R  jpeg_coeff_buf_full.
// [   10] R  jpeg_coeff_buf_empty.
// [ 8: 0] R  jpeg_coeff_buf_level.
#define VLC_JPEG_COEFF_BUF_STAT                    ((0x1d59  << 2) + 0xff620000)
// [   16] RW JPEG HUFFMAN table access mode. 0=Write; 1=Read.  Default 1.
// [ 8: 0] RW JPEG HUFFMAN table addr.                          Default 0.
#define VLC_HUFFMAN_ADDR                           ((0x1d5a  << 2) + 0xff620000)
// [19: 0] RW JPEG HUFFMAN table data.
#define VLC_HUFFMAN_DATA                           ((0x1d5b  << 2) + 0xff620000)
// bit[31:0] enc_mv_bits - including b8_mode and mvd
#define VLC_ENC_MV_BITS                            ((0x1d5c  << 2) + 0xff620000)
// bit[31:0] enc_coeff_bits - including cbp, token, trailing_sign, coeff_enc, h264_totzeros, h264_run
#define VLC_ENC_COEFF_BITS                         ((0x1d5d  << 2) + 0xff620000)
//
// Closing file:  vlc_regs.h
//
//------------------------------------------------------------------------------
// QDCT module level register offset
//------------------------------------------------------------------------------
//
// Reading file:  qdct_regs.h
//
//========================================================================
//  QDCT module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_HCODEC_QDCT_CBUS_BASE = 0x0f
// -----------------------------------------------
// bit[31:28] - mb_info_state
#define QDCT_STATUS_CTRL                           ((0x1f00  << 2) + 0xff620000)
// bit[18]    - enable_free_clk_sad_top
// bit[17]    - enable_free_clk_ie_top
// bit[16]    - enable_free_clk_ie_sub
// bit[15]    - enable_free_clk_mc_out
// bit[14]    - enable_free_clk_i_pred_top
// bit[13]    - enable_free_clk_idct_top
// bit[12]    - enable_free_clk_iq_top
// bit[11]    - enable_free_clk_q_top
// bit[10]    - enable_free_clk_dc_buff_8
// bit[9]     - enable_free_clk_dct_top
// bit[8]     - enable_free_clk_mb_info
// bit[7]     - enable_free_clk_mb_buff
// bit[6]     - enable_free_clk_reg
// bit[5]     - ignore_1_include_2nd_half_c
// bit[4]     - ignore_1_include_2nd_half
// bit[3]     - ignore_t_p8x8
// bit[2]     - not_ignore_dc
// bit[1]     - ignore_small_lac_intra
// bit[0]     - disable_fast_zero_block
#define QDCT_CONFIG                                ((0x1f01  << 2) + 0xff620000)
// bit[31]    - ignore_lac_coeff_en
// bit[30:26] - ignore_lac_coeff_else
// bit[25:21] - ignore_lac_coeff_2
// bit[20:16] - ignore_lac_coeff_1
// bit[15]    - ignore_cac_coeff_en
// bit[14:10] - ignore_cac_coeff_else
// bit[9:5]   - ignore_cac_coeff_2
// bit[4:0]   - ignore_cac_coeff_1
#define IGNORE_CONFIG                              ((0x1f02  << 2) + 0xff620000)
// bit[31]    - ignore_t_lac_coeff_en
// bit[30:26] - ignore_t_lac_coeff_else
// bit[25:21] - ignore_t_lac_coeff_2
// bit[20:16] - ignore_t_lac_coeff_1
// bit[15]    - ignore_cdc_coeff_en
// bit[14]    - ignore_t_lac_coeff_else_le_3
// bit[13]    - ignore_t_lac_coeff_else_le_4
// bit[12]    - ignore_cdc_only_when_empty_cac_inter
// bit[11]    - ignore_cdc_only_when_one_empty_inter
// bit[10:9]  - ignore_cdc_range_max_inter // 0-0, 1-1, 2,-2, 3-3
// bit[8:7]   - ignore_cdc_abs_max_inter // 0-1, 1-2, 2,-3, 3-4
// bit[6]     - reserved
// bit[5]     - ignore_cdc_only_when_empty_cac_intra
// bit[4]     - ignore_cdc_only_when_one_empty_intra
// bit[3:2]   - ignore_cdc_range_max_intra // 0-0, 1-1, 2,-2, 3-3
// bit[1:0]   - ignore_cdc_abs_max_intra // 0-1, 1-2, 2,-3, 3-4
#define IGNORE_CONFIG_2                            ((0x1f03  << 2) + 0xff620000)
// --------------------------------------------
// MB DATA DDR Interface
// --------------------------------------------
#define QDCT_MB_START_PTR                          ((0x1f10  << 2) + 0xff620000)
#define QDCT_MB_END_PTR                            ((0x1f11  << 2) + 0xff620000)
#define QDCT_MB_WR_PTR                             ((0x1f12  << 2) + 0xff620000)
#define QDCT_MB_RD_PTR                             ((0x1f13  << 2) + 0xff620000)
#define QDCT_MB_LEVEL                              ((0x1f14  << 2) + 0xff620000)
// bit  [31]    disable_mbxy_ie_save
// bit  [30]    no_wait_after_q_cdc
// bit  [29]    ie_start_int_enable
// bit  [28]    ignore_t_p8x8
// bit  [27]    zero_mc_out_null_non_skipped_mb
// bit  [26]    no_mc_out_null_non_skipped_mb
// bit  [25]    mc_out_even_skipped_mb
// bit  [24]    mc_out_wait_cbp_ready
// bit  [23]    mc_out_wait_mb_type_ready
// bit  [22]    i_pred_int_enable
// bit  [21]    intra_sat8_enable
// bit  [20]    ie_sub_enable
// bit  [19]    i_pred_enable
// bit  [18]    iq_enable
// bit  [17]    idct_enable
// bit  [16]    no_zero_coeff_mb
// bit  [15]    add_zero_coeff_block
// bit  [14]    mb_pause_enable
// bit  [13]    q_enable
// bit  [12]    dct_enable
// bit  [11]    ignore_magic_word
// bit  [10]    mb_info_en
// bit  [9]     mb_info_soft_reset
// bit  [8]     mb_always_ready Set to 1 to ignore mb_level blocking DDR read
// bit  [7]     mb_ready_for_transfer (Read Only)
// bit  [6]     data_ready_for_transfer (Read Only)
// bits [5:3]   mb_endian       Set MB Endian inside DDR memory
// bit  [2]     mb_read_busy   Read Only - indicate DDR read busy
// bit  [1]     mb_read_en     Set to 1 to enable reading data from DDR memory
// bit  [0]     mb_soft_reset   Soft reset
#define QDCT_MB_CONTROL                            ((0x1f15  << 2) + 0xff620000)
// bit 31    transfer_length 0 - 32x64 Bits per request, 1 - 16x64 Bits per request  // default : 0
// bit 30    A_urgent  // default : 0
// bit 29:24 A_brst_num // default : 0x3f
// bit 23    reserved
// bit 22    read_till_zero
// bit 21:16 A_id  // default : 0x21
// bit 15:0  mb_level_hold // default : 0
#define QDCT_MB_MEM_CTL                            ((0x1f16  << 2) + 0xff620000)
// bit  [31:24] reserved
// bit  [23:16] vb_buff_level     -- Read only
// bit  [15:8]  vb_buff_wr_point -- RW
// bit  [7:0]   vb_buff_rd_point -- RW
#define QDCT_MB_BUFF                               ((0x1f17  << 2) + 0xff620000)
// bit [31:0] mb infor data begin magic word - default : 0xa55aaa55
#define QDCT_MB_MAGIC_WORD                         ((0x1f18  << 2) + 0xff620000)
// Read Only Register
// bit[19]   dct_ready_1
// bit[18]   dct_ready_0
// bit[17]   dct_rd_idx
// bit[16]   dct_wr_idx
// bit[15]   dct_srdy
// bit[14]   dct_rrdy
// bit[13]   Reserved
// bit[12:8] dct_block_number
// bit[7:4]  dct_rw_addr
// bit[3:0]  dct_status
#define QDCT_DCT_STATUS                            ((0x1f19  << 2) + 0xff620000)
// bit[24:23]  vlc_quant_count
// bit[22:16]  vlc_delta_quant_data
// bit[15:10]  vlc_quant_data
// bit[9:4]    vlc_prev_quant_data
// bit[3:0]    q_status
#define QDCT_Q_STATUS                              ((0x1f1a  << 2) + 0xff620000)
// bit[31:3] Reserved
// bit[2:0]  picture_type
#define QDCT_PIC_INFO                              ((0x1f1b  << 2) + 0xff620000)
// bit[31:28] Reserved
// bit[27:22] I_pic_quant_c
// bit[21:16] I_pic_quant
// bit[15]    reserved
// bit[14:12] quant_rem_c
// bit[11:8]  quant_per_c
// bit[7]     reserved
// bit[6:4]   quant_rem
// bit[3:0]   quant_per
#define QDCT_Q_QUANT_I                             ((0x1f1c  << 2) + 0xff620000)
// bit[31:28] Reserved
// bit[27:22] P_pic_quant_c
// bit[21:16] P_pic_quant
// bit[15]    reserved
// bit[14:12] quant_rem_c
// bit[11:8]  quant_per_c
// bit[7]     reserved
// bit[6:4]   quant_rem
// bit[3:0]   quant_per
#define QDCT_Q_QUANT_P                             ((0x1f1d  << 2) + 0xff620000)
// bit[31]    mb_info_pause
// bit[30:16] pause_mby
// bit[15:0]  pause_mbx
#define QDCT_MB_PAUSE_CTL                          ((0x1f1e  << 2) + 0xff620000)
// bit[31]   top_control_ready_i_pred
// bit[30:28]top_dma_status
// bit[27]   top_control_ready_ie
// bit[26:24]Reserved
// bit[23]   ul_mb
// bit[22]   right_mb
// bit[21]   top_mb
// bit[20]   left_mb
// bit[19:8] mb_x
// bit[7:6]  i_pred_ref_idx_L
// bit[5:4]  i_pred_ref_idx_UL
// bit[3:2]  i_pred_ref_idx_U
// bit[1:0]  i_pred_ref_idx_UR
#define QDCT_TOP_CONTROL                           ((0x1f1f  << 2) + 0xff620000)
// bit[31:0] top_base_addr - DDR Memory start address for save top Pixel
#define QDCT_TOP_BASE_MEM                          ((0x1f20  << 2) + 0xff620000)
// bit 15:13 Reserved
// bit 12    A_urgent  // default : 0
// bit 11:6  A_brst_num // default : 0x3f
// bit 5:0   A_id  // default : 0x22
#define QDCT_TOP_MEM_CTL                           ((0x1f21  << 2) + 0xff620000)
// bit [11:0] top_wrrsp_count
#define QDCT_TOP_WRRSP                             ((0x1f22  << 2) + 0xff620000)
// Bit[3:0] qdct_dbg_idx
#define QDCT_DBG_IDX                               ((0x1f23  << 2) + 0xff620000)
// Read Only
#define QDCT_DBG_READ                              ((0x1f24  << 2) + 0xff620000)
// [19:18] RW jdct_inflow_ctrl. JPEG DCT input flow control.                                Default 0.
//            0=No halt;
//            1=DCT halts request at end of each 8x8 block;
//            2=DCT halts request at end of each MCU.
// [17:16] RW jpeg_coeff_last_sel.                                                          Default 0.
//            Select at which point to finish processing, give update to AmRISC so it can control the next step.
//            0=Mark last coeff at the end of an 8x8 block;
//            1=Mark at the end of an MCU;
//            2=Mark at the end of a scan.
// [   15] RW jpeg_quant_sel_comp2. 0=Comp2 select Quantization table 0; 1=Select table 1.  Default 0.
// [   14] RW jpeg_v_factor_comp2. Component 2's vertical sampling factor.                  Default 0.
// [   13] RW jpeg_h_factor_comp2. Component 2's horizontal sampling factor.                Default 0.
// [   12] RW jpeg_comp2_en. Set 1 if the scan will include component 2 (Cr).               Default 0.
// [   11] RW jpeg_quant_sel_comp1. 0=Comp1 select Quantization table 0; 1=Select table 1.  Default 0.
// [   10] RW jpeg_v_factor_comp1. Component 1's vertical sampling factor.                  Default 0.
// [    9] RW jpeg_h_factor_comp1. Component 1's horizontal sampling factor.                Default 0.
// [    8] RW jpeg_comp1_en. Set 1 if the scan will include component 1 (Cb).               Default 0.
// [    7] RW jpeg_quant_sel_comp0. 0=Comp0 select Quantization table 0; 1=Select table 1.  Default 0.
// [    6] RW jpeg_v_factor_comp0. Component 0's vertical sampling factor.                  Default 0.
// [    5] RW jpeg_h_factor_comp0. Component 0's horizontal sampling factor.                Default 0.
// [    4] RW jpeg_comp0_en. Set 1 if the scan will include component 0 (Y).                Default 0.
// [ 3: 1] RW jdct_intr_sel. JPEG DCT interrupt select.                                     Default 0.
//            0=Disable intr;
//            1=Intr at end of each 8x8 block of DCT input;
//            2=Intr at end of each MCU of DCT input;
//            3=Intr at end of a scan of DCT input;
//            4=Intr at end of each 8x8 block of DCT output;
//            5=Intr at end of each MCU of DCT output;
//            6=Intr at end of a scan of DCT output.
// [    0] RW jpeg_en. 0=Disable JPEG QDCT; 1=Enable JPEG QDCT.                             Default 0.
#define QDCT_JPEG_CTRL                             ((0x1f25  << 2) + 0xff620000)
// [29:16] RW jpeg_x_end.   Picture X end.      Default 0.
// [13: 0] RW jpeg_x_start. Picture X start.    Default 0.
#define QDCT_JPEG_X_START_END                      ((0x1f26  << 2) + 0xff620000)
// [29:16] RW jpeg_y_end.   Picture Y end.      Default 0.
// [13: 0] RW jpeg_y_start. Picture Y start.    Default 0.
#define QDCT_JPEG_Y_START_END                      ((0x1f27  << 2) + 0xff620000)
// [    8] RW JPEG QUANT table access mode. 0=Write; 1=Read.    Default 1.
// [ 5: 0] RW JPEG QUANT table addr.                            Default 0.
#define QDCT_JPEG_QUANT_ADDR                       ((0x1f28  << 2) + 0xff620000)
// [31: 0] RW JPEG QUANT table data.
#define QDCT_JPEG_QUANT_DATA                       ((0x1f29  << 2) + 0xff620000)
// [    1] W  resume_jdct.
//            Write 1 to this bit will resume JPEG input engine when previously
//            it is halted by QDCT_JPEG_CTRL.jdct_inflow_ctrl.
// [    0] W  jpeg_sof.
//            Write 1 to this bit will start JPEG input engine.
#define QDCT_JPEG_SOF_RESUME                       ((0x1f2a  << 2) + 0xff620000)
// [31:30] R  dct_st.       jdct_ctrl state. 0=IDLE; 1=WAIT; 2=DCT_REQ.
// [29:28] R  mfdin_comp.   Current component at pixel request to MFDIN.
// [27:14] R  mfdin_y.      Current Y at pixel request to MFDIN.
// [13: 0] R  mfdin_x.      Current X at pixel request to MFDIN.
#define QDCT_JPEG_DCT_STATUS0                      ((0x1f2b  << 2) + 0xff620000)
// [15:12] R  JPEG Quant read MEM select.
// [11: 8] R  JPEG DCT2 write MEM select.
// [ 7: 4] R  JPEG DCT2 read MEM select.
// [ 3: 0] R  JPEG DCT1 write MEM select.
#define QDCT_JPEG_DCT_STATUS1                      ((0x1f2c  << 2) + 0xff620000)
// [28:16] RW jdct_coeff1.  Default 13'h1D90; // 7568 = 4096 * sqrt(2) * (cos(Pi/8) + sin(Pi/8)) // 7569
// [12: 0] RW jdct_coeff0.  Default 13'h16A1; // 5793 = 4096 * sqrt(2)
#define QDCT_JPEG_DCT_COEFF01                      ((0x1f2d  << 2) + 0xff620000)
// [28:16] RW jdct_coeff3.  Default 13'h0C3F; // 3135 = 4096 * sqrt(2) * (cos(Pi/8) - sin(Pi/8))
// [12: 0] RW jdct_coeff2.  Default 13'h08A9; // 2217 = 4096 * sqrt(2) * sin(Pi/8) // 2215
#define QDCT_JPEG_DCT_COEFF23                      ((0x1f2e  << 2) + 0xff620000)
// [28:16] RW jdct_coeff5.  Default 13'h046A; // 1130 = 4096 * (cos(3Pi/16) - sin(3Pi/16))
// [12: 0] RW jdct_coeff4.  Default 13'h1631; // 5681 = 4096 * (cos(3Pi/16) + sin(3Pi/16)) // 5682
#define QDCT_JPEG_DCT_COEFF45                      ((0x1f2f  << 2) + 0xff620000)
// [28:16] RW jdct_coeff7.  Default 13'h0C92; // 3218 = 4096 * (cos(Pi/16) - sin(Pi/16))
// [12: 0] RW jdct_coeff6.  Default 13'h12D0; // 4816 = 4096 * (cos(Pi/16) + sin(Pi/16))
#define QDCT_JPEG_DCT_COEFF67                      ((0x1f30  << 2) + 0xff620000)
// [28:16] RW jdct_coeff9.  Default 13'h0FB1; // 4017 = 4096 * cos(Pi/16)
// [12: 0] RW jdct_coeff8.  Default 13'h0D4E; // 3406 = 4096 * cos(3Pi/16)
#define QDCT_JPEG_DCT_COEFF89                      ((0x1f31  << 2) + 0xff620000)
#define QDCT_I_PRED_REF_WR_IDX                     ((0x1f32  << 2) + 0xff620000)
#define QDCT_I_PRED_REF_WR_DATA                    ((0x1f33  << 2) + 0xff620000)
// bit[29]  mb_info_latch_no_I16_pred_mode
// bit[28]  ie_dma_mbxy_use_i_pred
// bit[27]  ie_dma_read_write_use_ip_idx
// bit[26]  ie_start_use_top_dma_count
// bit[25]  i_pred_top_dma_rd_mbbot
// bit[24]  i_pred_top_dma_wr_disable
// bit[23]  i_pred_mix
// bit[22]  me_ab_rd_when_intra_in_p
// bit[21]  force_mb_skip_run_when_intra
// bit[20]  mc_out_mixed_type
// bit[19]  ie_start_when_quant_not_full
// bit[18]  mb_info_state_mix
// bit[17]  mb_type_use_mix_result
// bit[16]  me_cb_ie_read_enable
// bit[15]  ie_cur_data_from_me
// bit[14]  rem_per_use_table
// bit[13]  q_latch_int_enable
// bit[12]  q_use_table
// bit[11]  q_start_wait
// bit[10]  LUMA_16_LEFT_use_cur
// bit[9]   DC_16_LEFT_SUM_use_cur
// bit[8]   c_ref_ie_sel_cur
// bit[7]   c_ipred_perfect_mode
// bit[6]   ref_ie_ul_sel 0-old, 1-use next_set
// bit[5]   mb_type_use_ie_result
// bit[4]   detect_I16_from_I4
// bit[3]   ie_not_wait_ref_busy
// bit[2]   ie_I16_enable
// bit[1:0] ie_done_sel (0, 1, 2, -1)
#define QDCT_ADV_CONFIG                            ((0x1f34  << 2) + 0xff620000)
// bit [31:16] I16x16_weight
// bit [15:0]  I4x4_weight
#define IE_WEIGHT                                  ((0x1f35  << 2) + 0xff620000)
// bit [31]  reserved
// bit [30] q_I16MB
// bit [29]  reserved
// bit [28]  reserved
// bit [27:23] quant_table_addr I4MB:[0,7], I16MB:[8:15], INTER:[16:23], Reserved:[24:31]
// bit [22]    quant_table_addr_update(when notupdate_rem_per) (read is arb_result : q_intra)
// bit [21:19] quant_rem_c
// bit [18:16] quant_rem_y
// bit [15:12] quant_per_c
// bit [11:8]  quant_per_y
// bit [7:2] quant
// bit [1] update_rem_per
// bit [0] clear_wait_status
#define Q_QUANT_CONTROL                            ((0x1f36  << 2) + 0xff620000)
#define MBBOT_EVEN_ADDR                            ((0x1f37  << 2) + 0xff620000)
#define MBBOT_ODD_ADDR                             ((0x1f38  << 2) + 0xff620000)
// bit [29:24] quant_table_data_3
// bit [21:16] quant_table_data_2
// bit [13:8]  quant_table_data_1
// bit [5:0]   quant_table_data_0
#define QUANT_TABLE_DATA                           ((0x1f39  << 2) + 0xff620000)
// bit [31:16] ie_sad_offset_I16
// bit [15:0] ie_sad_offset_I4
#define SAD_CONTROL_0                              ((0x1f3a  << 2) + 0xff620000)
// bit [31]     sad_soft_reset
// bit [30:27]  reserved
// bit [26:24]  ie_sad_shift_I16
// bit [22:20]  ie_sad_shift_I4
// bit [18:16]  me_sad_shift_INTER
// bit [15:0]   me_sad_offset_INTER
#define SAD_CONTROL_1                              ((0x1f3b  << 2) + 0xff620000)
// bit [31]     vlc_quant_rd_ptr
// bit [30]     vlc_quant_rd_ptr_update
// bit [29]     vlc_quant_wr_ptr
// bit [28]     vlc_quant_wr_ptr_update
// bit [27:26]  reserved
// bit [25:19]  vlc_delta_quant_1
// bit [18:13]  vlc_quant_1
// bit [12:6]   vlc_delta_quant_0
// bit [5:0]    vlc_quant_0
#define QDCT_VLC_QUANT_CTL_0                       ((0x1f3c  << 2) + 0xff620000)
// bit [31:30]  me_sad_rd_idx
// bit [29]     me_sad_rd_idx_update
// bit [28:27]  me_sad_wr_idx
// bit [26]     me_sad_wr_idx_update
// bit [25:24]  ie_sad_rd_idx
// bit [23]     ie_sad_rd_idx_update
// bit [22:21]  ie_sad_wr_idx
// bit [20]     ie_sad_wr_idx_update
// bit [19:12]  Reserved
// bit [11:6]   vlc_max_delta_q_neg
// bit [5:0]    vlc_max_delta_q_pos
#define QDCT_VLC_QUANT_CTL_1                       ((0x1f3d  << 2) + 0xff620000)
// bit[4] jdct_int
// bit[3] quant_latch
// bit[2] me_done
// bit[1] ie_start
// bit[0] i_pred_start
#define QDCT_INT_STATUS                            ((0x1f3e  << 2) + 0xff620000)
// bit[3]   mix_i_pred_wait_left_en
// bit[2:0] mc_pending_mb_count
#define QDCT_MIX_I_PRED_STATUS                     ((0x1f3f  << 2) + 0xff620000)
// IE/ME share same cbus_base as QDCT
//
// bit[31]  active_ur_block
// bit[30]  active_ul_block
// bit[21]  disable_HENC_V_PRED_16
// bit[20]  disable_HENC_H_PRED_16
// bit[19]  disable_HENC_DC_PRED_16
// bit[18]  disable_HENC_HENC_HOR_UP_PRED
// bit[17]  disable_HENC_VERT_LEFT_PRED
// bit[16]  disable_HENC_HENC_HOR_DOWN_PRED
// bit[15]  disable_HENC_VERT_RIGHT_PRED
// bit[14]  disable_HENC_DIAG_DOWN_RIGHT_PRED
// bit[13]  disable_HENC_DIAG_DOWN_LEFT_PRED
// bit[12]  disable_HENC_DC_PRED
// bit[11]  disable_HENC_HOR_PRED
// bit[10]  disable_HENC_VERT_PRED
// bit[9]   ie_c_wait_ie_pause
// bit[8:4] max_ie_result_buff_count
// bit[3]   ie_wait_for_ie_result  // use for (max_ie_result_buff_count == 0) to wait every block
// bit[2]   reserved
// bit[1]   ie_enable
// bit[0]   ie_soft_reset
#define IE_CONTROL                                 ((0x1f40  << 2) + 0xff620000)
// bit[31:12] Reserved
// bit[11:0]  mb_y
#define IE_MB_POSITION                             ((0x1f41  << 2) + 0xff620000)
// bit[31:16] me_skip_run
// bit[15:8]  reserved
// bit [7:4]  me_b8_mode
// bit [3:0]  ie_me_mb_type
#define IE_ME_MB_INFO                              ((0x1f42  << 2) + 0xff620000)
// bit[3]   ie_result_buff_enable
// bit[2]   ie_result_buff_soft_reset
// bit[1]   sad_enable
// bit[0]   ie_sad_soft_reset
#define SAD_CONTROL                                ((0x1f43  << 2) + 0xff620000)
// bit[31:16] - ie_result_buff_count - read only
// bit[14:12] -current_ie_result (pred_mode) - read only
// bit[11]  top_control_data_buff_wr_ptr - rd/wr
// bit[10]  top_control_data_buff_rd_ptr - rd/wr
// bit[9:5] ie_result_buff_wr_ptr        - rd/wr
// bit[4:0] ie_result_buff_rd_ptr        - rd/wr
#define IE_RESULT_BUFFER                           ((0x1f44  << 2) + 0xff620000)
// bit[63:0] ie_i4_pred_mode
#define IE_I4_PRED_MODE_HI                         ((0x1f45  << 2) + 0xff620000)
#define IE_I4_PRED_MODE_LO                         ((0x1f46  << 2) + 0xff620000)
// bit [31:9] reserved
// bit [8:4] i_pred_block_number
// bit [3:0] ie_c_pred_mode
#define IE_C_PRED_MODE                             ((0x1f47  << 2) + 0xff620000)
// 31:16 - Left, 0-select ie_pixel, 1-select mc_data_out
// 15:0  - Top,  0-select ie_pixel, 1-select mc_data_out
#define IE_CUR_REF_SEL                             ((0x1f48  << 2) + 0xff620000)
// bit[31]  enable_f_skip_1_step_3
// bit[30]  enable_f_skip_1_step_2
// bit[29]  enable_f_skip_1_step_1
// bit[28]  step_3_enable
// bit[27]  step_2_sub_pixel
// bit[26]  always_f_skip_step_3
// bit[25]  always_f_skip_step_2
// bit[24]  always_f_skip_step_1
// bit[23]  half_pixel_only
// bit[22:13] reserved
// bit[12]  adv_mv_enable
// bit[11]  sad_short_valid
// bit[10:9] mv_flexable_ctl 00:0x40, 01:0x80, 10:0xc0, 11 : 0x100
// bit[8]   no_md_ab_rd
// bit[7]   use_dct_state
// bit[6]   enable_free_clk_me_ctl
// bit[5]   enable_free_clk_me_ab
// bit[4]   enable_free_clk_me_cb
// bit[3]   reserved
// bit[2]   me_done_int_enable
// bit[1]   me_enable
// bit[0]   me_soft_reset
#define ME_CONTROL                                 ((0x1f49  << 2) + 0xff620000)
// bit[31:28] Reserved
// bit[27:16] me_start_mby
// bit[15:12] Reserved
// bit[11:0]  me_start_mbx
#define ME_START_POSITION                          ((0x1f4a  << 2) + 0xff620000)
// bit [31:28] me_status - Read only
// bit [27:24] me_cb_status  // current buffer
// bit [23:20] me_ab_status  // anc buffer
// bit [19]    Reserved
// bit [18:16] me_ab_wr_ptr  // read only
// bit [15:4]  me_last_mbx
// bit [3:1]   me_ab_rd_ptr  // read only
// bit [0]     me_action
#define ME_STATUS                                  ((0x1f4b  << 2) + 0xff620000)
// all Read-only
// bit [31:28] Reserved
// bit [27:16] me_ab_mbx
// bit [15:14] me_cb_wr_ptr
// bit [13:12] me_cb_rd_ptr
// bit [11:0]  me_cb_mbx
#define ME_DEBUG                                   ((0x1f4c  << 2) + 0xff620000)
// bit[29:24] step_3_skip_line
// bit[23:18] step_2_skip_line
// bit[17:12] step_1_skip_line
// bit[11:6]  step_0_skip_line
// bit[5:0]   read_skip_line
#define ME_SKIP_LINE                               ((0x1f4d  << 2) + 0xff620000)
// bit 15:13 Reserved
// bit 12    A_urgent  // default : 0
// bit 11:6  A_brst_num // default : 0x3f
// bit 5:0   A_id  // default : 0x23
#define ME_AB_MEM_CTL                              ((0x1f4e  << 2) + 0xff620000)
// bit[31:24] anc_pic_canvas
// bit[23:12] max_me_mby_num
// bit[11:0]  max_me_mbx_num
#define ME_PIC_INFO                                ((0x1f4f  << 2) + 0xff620000)
// bit [23:12] me_sad_enough_1
// bit [11:0]  me_sad_enough_0
#define ME_SAD_ENOUGH_01                           ((0x1f50  << 2) + 0xff620000)
// bit [25:12] adv_mv_8x8_enough
// bit [11:0]  me_sad_enough_2
#define ME_SAD_ENOUGH_23                           ((0x1f51  << 2) + 0xff620000)
// bit [21:10] me_step0_big_sad
// bit [9:5] me_step0_close_mv_y
// bit [4:0] me_step0_close_mv_x
#define ME_STEP0_CLOSE_MV                          ((0x1f52  << 2) + 0xff620000)
// bit[31:24] force_skip_sad_3
// bit[23:16] force_skip_sad_2
// bit[15:08] force_skip_sad_1
// bit[07:00] force_skip_sad_0
#define ME_F_SKIP_SAD                              ((0x1f53  << 2) + 0xff620000)
// bit[31:24] force_skip_weight_3
// bit[23:16] force_skip_weight_2
// bit[15:08] force_skip_weight_1
// bit[07:00] force_skip_weight_0
#define ME_F_SKIP_WEIGHT                           ((0x1f54  << 2) + 0xff620000)
// Merge when (
//              (flex & me_merge_flex_en) |
//              (big_sad & me_merge_sad_en)|
//              ((~me_merge_flex_en)&(~me_merge_sad_en))
//            ) &
//            ( small_mv_diff |(~me_merge_small_mv_en))
//            & (me_merge_flex_en | me_merge_sad_en | me_merge_small_mv_en)
// bit[31]   me_merge_mv_en_16
// bit[30]   me_merge_small_mv_en_16
// bit[29]   me_merge_flex_en_16
// bit[28]   me_merge_sad_en_16
// bit[27]   me_merge_mv_en_8
// bit[26]   me_merge_small_mv_en_8
// bit[25]   me_merge_flex_en_8
// bit[24]   me_merge_sad_en_8
// bit[23:18] me_merge_mv_diff_16
// bit[17:12] me_merge_mv_diff_8
// bit[11:0] me_merge_min_sad
#define ME_MV_MERGE_CTL                            ((0x1f55  << 2) + 0xff620000)
// bit[31:24] mv_step_weight_1
// bit[23:16] mv_pre_weight_1
// bit [15:0] mv_step_weight_0
// bit[7:0]   mv_pre_weight_0
#define ME_MV_WEIGHT_01                            ((0x1f56  << 2) + 0xff620000)
// bit[31:24] mv_step_weight_3 (mv_step_weight_1_2nd)
// bit[23:16] mv_pre_weight_3 (mv_pre_weight_1_2nd)
// bit[15:8]  mv_step_weight_2
// bit[7:0]   mv_pre_weight_2
#define ME_MV_WEIGHT_23                            ((0x1f57  << 2) + 0xff620000)
// bit[31:24] me_sad_range_inc_3
// bit[23:16] me_sad_range_inc_2
// bit[15:8] me_sad_range_inc_1
// bit[7:0] me_sad_range_inc_0
#define ME_SAD_RANGE_INC                           ((0x1f58  << 2) + 0xff620000)
// bit[31:19]  reserved
// bit[18]     sub_relative_any_1_en
// bit[17]     sub_relative_any_2_en
// bit[16]     sub_relative_any_3_en
// bit[15]     sub_relative_any_4_en
// bit[14]     sub_relative_any_h_en
// bit[13]     sub_make_non_flex_fix
// bit[12]     sub_make_big_non_flex_fix
// bit[11:8]   sub_normal_mv_diff_16
// bit[7:4]    sub_normal_mv_diff_8
// bit[3:2]    Reserved
// bit[1]      sub_merge_enable_16
// bit[0]      sub_merge_enable_8
#define ME_SUB_MERGE_CTL                           ((0x1f59  << 2) + 0xff620000)
// bit[31:28]  sub_ref_mv_diff_near
// bit[27:24]  sub_ref_mv_diff_near_flex
// bit[23:20]  sub_ref_mv_diff
// bit[19:16]  sub_ref_mv_diff_flex
// bit[15:8]   sub_ref_mv_near_weight
// bit[7:0]    sub_ref_mv_weight
#define ME_SUB_REF_MV_CTL                          ((0x1f5a  << 2) + 0xff620000)
// bit[31:24]  sub_weight_max_sad
// bit[23:16]  sub_any_range_sad
// bit[15:8]   sub_any_min_sad
// bit[7:0]    sub_any_max_sad
#define ME_SUB_ANY_WEIGHT_SAD                      ((0x1f5b  << 2) + 0xff620000)
// bit[31:24]  sub_fix_sad
// bit[23:16]  sub_fix_diff_sad
// bit[15:8]   sub_sad_flex_adj
// bit[7:0]    sub_big_non_flex_fix_sad
#define ME_SUB_FIX_SAD                             ((0x1f5c  << 2) + 0xff620000)
// bit[31:24]  sub_fix_min_sad
// bit[23:16]  sub_fix_min_diff_sad
// bit[15:8]   sub_fix_min_sad_2
// bit[7:0]    sub_fix_min_diff_sad_2
#define ME_SUB_FIX_MIN_SAD                         ((0x1f5d  << 2) + 0xff620000)
// bit[31:24]  sub_snap_to_ref_max_sad
// bit[23]     sub_snap_to_ref_non_flex
// bit[22:16]  sub_snap_to_ref_mv_diff
// bit[15:4]   sub_glitch_mv_sad
// bit[3:0]    sub_glitch_mv_diff
#define ME_SUB_SNAP_GLITCH                         ((0x1f5e  << 2) + 0xff620000)
// bit[31:20]  sad_act_limit
// bit[19:8]   s_a_any_sad
// bit[7]      Reserved
// bit[6:5]    sub_merge_method
// bit[4]      use_sub_act_result
// bit[3]      s_a_rnd
// bit[2]      Reserved
// bit[1]      sub_act_en_16
// bit[0]      sub_act_en
#define ME_SUB_ACT_CTL                             ((0x1f5f  << 2) + 0xff620000)
// bit[31:16]  reserved
// bit[15:0]   me_weight
#define ME_WEIGHT                                  ((0x1f60  << 2) + 0xff620000)
// bit[31]  ready_update
// bit[30]  data_update
// bit[29:28] reserved
// bit[27:22] me_quant_0
// bit[21]  ie_sad_ready_0
// bit[20:18]  Reserved
// bit[17:16]  me_sad_mv_type_0
// bit[15:0] me_sad_0
#define ME_SAD_0                                   ((0x1f61  << 2) + 0xff620000)
// bit[31]  ready_update
// bit[30]  data_update
// bit[29:28] reserved
// bit[27:22] me_quant_1
// bit[21]  me_sad_ready_1
// bit[20:18]  Reserved
// bit[17:16]  me_sad_mv_type_1
// bit[15:0] me_sad_1
#define ME_SAD_1                                   ((0x1f62  << 2) + 0xff620000)
// bit[31]  ready_update
// bit[30]  data_update
// bit[29:28] reserved
// bit[27:22] me_quant_2
// bit[21]  me_sad_ready_2
// bit[20:18]  Reserved
// bit[17:16]  me_sad_mv_type_2
// bit[15:0] me_sad_2
#define ME_SAD_2                                   ((0x1f63  << 2) + 0xff620000)
// bit[31]  ready_update
// bit[30]  data_update
// bit[29:28] reserved
// bit[27:22] me_quant_3
// bit[21]  me_sad_ready_3
// bit[20:18]  Reserved
// bit[17:16]  me_sad_mv_type_3
// bit[15:0] me_sad_3
#define ME_SAD_3                                   ((0x1f64  << 2) + 0xff620000)
// bit[31]  ready_update
// bit[30]  data_update
// bit[29:28] reserved
// bit[27:22] ie_quant_0
// bit[21]  ie_sad_ready_0
// bit[20]   I4/I16 (0-I4MB, 1-I16MB)
// bit[19:0] ie_sad_0
#define IE_SAD_0                                   ((0x1f65  << 2) + 0xff620000)
// bit[31]  ready_update
// bit[30]  data_update
// bit[29:28] reserved
// bit[27:22] ie_quant_1
// bit[21]  ie_sad_ready_1
// bit[20]   I4/I16 (0-I4MB, 1-I16MB)
// bit[19:0] ie_sad_1
#define IE_SAD_1                                   ((0x1f66  << 2) + 0xff620000)
// bit[31]  ready_update
// bit[30]  data_update
// bit[29:28] reserved
// bit[27:22] ie_quant_2
// bit[21]  ie_sad_ready_2
// bit[20]   I4/I16 (0-I4MB, 1-I16MB)
// bit[19:0] ie_sad_2
#define IE_SAD_2                                   ((0x1f67  << 2) + 0xff620000)
// bit[31]  ready_update
// bit[30]  data_update
// bit[29:28] reserved
// bit[27:22] ie_quant_3
// bit[21]  ie_sad_ready_3
// bit[20]   I4/I16 (0-I4MB, 1-I16MB)
// bit[19:0] ie_sad_3
#define IE_SAD_3                                   ((0x1f68  << 2) + 0xff620000)
// bit[31]   enable_large_diff_16x8
// bit[30]   enable_large_diff_8x16
// bit[29:16] adv_mv_8x8_weight
// bit[15:14] reserved
// bit[13:0] adv_mv_4x4x4_weight
#define ADV_MV_CTL0                                ((0x1f69  << 2) + 0xff620000)
// bit[31:16] adv_mv_16x16_weight
// bit[15]   enable_large_diff_16x16
// bit[14:0] adv_mv_16_8_weight
#define ADV_MV_CTL1                                ((0x1f6a  << 2) + 0xff620000)
#define ADV_MV_CTL2                                ((0x1f6b  << 2) + 0xff620000)
// bit[31]    v3_skip_enable
// bit[30]    v3_step_1_weight_enable // for step1, will only use pre_weight for block0, only step_weight for block 1,2,3
// bit[29]    v3_l2_skip_only_use_l2_sad // set to 1 may allow l1 maybe not skip
// bit[28]    v3_mv_sad_weight_enable
// bit[27]    v3_ipred_type_enable
// bit[25:12] force_skip_sad_1
// bit[11:0]  force_skip_sad_0
#define V3_SKIP_CONTROL                            ((0x1f6c  << 2) + 0xff620000)
// bit[18:16] top_ipred_type_count
// bit[15:14] Reserved
// bit[13:12] top_ipred_type_rd_idx
// bit[11:10] top_ipred_type_wr_idx
// bit[9]   left_ipred_type_ready
// bit[8]   top_ipred_type_ready
// bit[7:6] left_mv_idx
// bit[5:4] top_mv_idx
// bit[3] - left_mv_ready
// bit[2:0] top_mv_ready
#define V3_TOP_LEFT_CTL                            ((0x1f6d  << 2) + 0xff620000)
#define V3_TOP_MV                                  ((0x1f6e  << 2) + 0xff620000)
#define V3_LEFT_MV                                 ((0x1f6f  << 2) + 0xff620000)
// bit[31:30] reserved
// bit[29:16] v3_skip_weight_1
// bit[15:12] reserved
// bit[11:0]  v3_skip_weight_0
#define V3_SKIP_WEIGHT                             ((0x1f70  << 2) + 0xff620000)
// bit[31:28] reserved
// bit[27:16] v3_l1_f_skip_max_sad
// bit[15:12] reserved
// bit[11:0]  v3_l1_skip_max_sad
#define V3_L1_SKIP_MAX_SAD                         ((0x1f71  << 2) + 0xff620000)
// bit[31:16] force_skip_sad_2
// bit[15:0]  v3_skip_weight_2
#define V3_L2_SKIP_WEIGHT                          ((0x1f72  << 2) + 0xff620000)
// bit[21:16] v3_mv_sad_table_addr 0-15 table_step_0
// bit[11:0]  v3_mv_sad
#define V3_MV_SAD_TABLE                            ((0x1f73  << 2) + 0xff620000)
// [31:16] v3_ie_f_zero_sad_i16
// [15:0]  v3_ie_f_zero_sad_i4
#define V3_F_ZERO_CTL_0                            ((0x1f74  << 2) + 0xff620000)
// [25]    v3_no_ver_when_top_zero_en
// [24]    v3_no_hor_when_left_zero_en
// [23:16] v3_max_I16_H_num    // 0 means no break
// [15:0]  v3_me_f_zero_sad
#define V3_F_ZERO_CTL_1                            ((0x1f75  << 2) + 0xff620000)
#define V3_TOP_INTRA_INFO                          ((0x1f76  << 2) + 0xff620000)
#define V3_LEFT_INTRA_INFO                         ((0x1f77  << 2) + 0xff620000)
// [31:24]  C_ipred_weight_H
// [23:16]  C_ipred_weight_V
// [15:8]   I4_ipred_weight_else
// [7:0]    I4_ipred_weight_most
#define V3_IPRED_TYPE_WEIGHT_0                     ((0x1f78  << 2) + 0xff620000)
// [31:24]  I16_ipred_weight_DC
// [23:16]  I16_ipred_weight_H
// [15:8]   I16_ipred_weight_V
// [7:0]    C_ipred_weight_DC
#define V3_IPRED_TYPE_WEIGHT_1                     ((0x1f79  << 2) + 0xff620000)
// [31:16]  v3_left_small_max_me_sad
// [15:0]   v3_left_small_max_ie_sad
#define V3_LEFT_SMALL_MAX_SAD                      ((0x1f7a  << 2) + 0xff620000)
// (qr==7) & (qp==15) means force zero block
// [31:26]  v4_force_q_r_intra
// [25:20]  v4_force_q_r_inter
// [19]     v4_force_q_y_enable
// [18:16]  v4_force_qr_y
// [15:12]  v4_force_qp_y
// [11:0]   v4_force_skip_sad
#define V4_FORCE_SKIP_CFG                          ((0x1f7b  << 2) + 0xff620000)
// v5 Complexity // Y(256 pixel per MB) and C(128 pixel per MB)
// For every 4x4 block, calculate average and Add abs(pixel-average) together
// bit[31:16] v5_diff_sum_C
// bit[15:0]  v5_diff_sum_Y
#define V5_MB_DIFF_SUM                             ((0x1f7c  << 2) + 0xff620000)
// bit[31:24] v5_small_diff_cnt_C
// bit[23:16] v5_small_diff_C
// bit[15:8]  v5_small_diff_cnt_Y
// bit[7:0]   v5_small_diff_Y
#define V5_SMALL_DIFF_CNT                          ((0x1f7d  << 2) + 0xff620000)
// bit[31:29] Reserved
// bit[28:24] v5_simple_block_cnt // 0 -15 Y 16-23 C
// bit[23:20] v5_simple_pixel_cnt
// bit[19:18] v5_simple_dq_wr_ptr
// bit[17:16] v5_simple_dq_rd_ptr
// bit[15:12] v5_simple_dq (Read Only)
// bit[11:8]  v5_simple_me_weight(Read Only)
// bit[7] v5_use_small_diff_cnt
// bit[6] v5_simple_mb_inter_all_en
// bit[5] v5_simple_mb_inter_8x8_en
// bit[4] v5_simple_mb_inter_16_8_en
// bit[3] v5_simple_mb_inter_16x16_en
// bit[2] v5_simple_mb_intra_en
// bit[1] v5_simple_mb_C_en
// bit[0] v5_simple_mb_Y_en
#define V5_SIMPLE_MB_CTL                           ((0x1f7e  << 2) + 0xff620000)
// bit[31:28] v5_simple_dq_shift
// bit[27:24] v5_simple_dq_6(-7 to +7)
// bit[23:20] v5_simple_dq_5(-7 to +7)
// bit[19:16] v5_simple_dq_4(-7 to +7)
// bit[15:12] v5_simple_dq_3(-7 to +7)
// bit[11:08] v5_simple_dq_2(-7 to +7)
// bit[07:04] v5_simple_dq_1(-7 to +7)
// bit[03:00] v5_simple_dq_0(-7 to +7)
#define V5_SIMPLE_MB_DQUANT                        ((0x1f7f  << 2) + 0xff620000)
// bit[31:28] v5_simple_me_weight_shift
// bit[27:24] v5_simple_me_weight_6(-7 to +7)
// bit[23:20] v5_simple_me_weight_5(-7 to +7)
// bit[19:16] v5_simple_me_weight_4(-7 to +7)
// bit[15:12] v5_simple_me_weight_3(-7 to +7)
// bit[11:08] v5_simple_me_weight_2(-7 to +7)
// bit[07:04] v5_simple_me_weight_1(-7 to +7)
// bit[03:00] v5_simple_me_weight_0(-7 to +7)
#define V5_SIMPLE_MB_ME_WEIGHT                     ((0x1f80  << 2) + 0xff620000)
//
// Closing file:  qdct_regs.h
//
//------------------------------------------------------------------------------
// HCODEC MDEC module level register offset
//------------------------------------------------------------------------------
//
// Reading file:  hcodec_mdec_regs.h
//
//========================================================================
//  MDEC module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_HCODEC_HDEC_CBUS_BASE = 0x09
// -----------------------------------------------
//`define HCODEC_MC_CTRL_REG         8'h00
//`define HCODEC_MC_MB_INFO          8'h01
//`define HCODEC_MC_PIC_INFO         8'h02
//`define HCODEC_MC_HALF_PEL_ONE     8'h03
//`define HCODEC_MC_HALF_PEL_TWO     8'h04
//`define HCODEC_POWER_CTL_MC        8'h05
//
//`define HCODEC_MC_CMD			    8'h06
//`define HCODEC_MC_CTRL0			8'h07
//`define HCODEC_MC_PIC_W_H  	    8'h08
//`define HCODEC_MC_STATUS0		    8'h09
//`define HCODEC_MC_STATUS1		    8'h0a
//`define HCODEC_MC_CTRL1			8'h0b
//`define HCODEC_MC_MIX_RATIO0	    8'h0c
//`define HCODEC_MC_MIX_RATIO1	    8'h0d
//`define HCODEC_MC_DP_MB_XY  	    8'h0e     //read only
//`define HCODEC_MC_OM_MB_XY  	    8'h0f     //read only
//
//`define HCODEC_MC_MPORT_CTRL  	    8'h40
//`define HCODEC_MC_MPORT_DAT  	    8'h41
//`define HCODEC_MC_WT_PRED_CTRL  	8'h42
//`define HCODEC_MC_MBBOT_ST_EVEN_ADDR 8'h44
//`define HCODEC_MC_MBBOT_ST_ODD_ADDR 8'h45
//`define HCODEC_MC_DPDN_MB_XY        8'h46    //read only
//`define HCODEC_MC_OMDN_MB_XY        8'h47    //read only
//`define HCODEC_MC_HCMDBUF_H        8'h48
//`define HCODEC_MC_HCMDBUF_L        8'h49
//`define HCODEC_MC_HCMD_H           8'h4a     //read only
//`define HCODEC_MC_HCMD_L           8'h4b     //read only
//`define HCODEC_MC_IDCT_DAT         8'h4c
//
//`define HCODEC_MC_CTRL_GCLK_CTRL   8'h4d
//`define HCODEC_MC_OTHER_GCLK_CTRL  8'h4e
//
////Bit 29:24, mbbot thread ID and token
////Bit 21:16, mc read/write thread ID and token
////Bit 13:8,  mbbot pre-arbitor burst number
////Bit 5:0,   mc pre-arbitor burst number
//`define HCODEC_MC_CTRL2            8'h4f
//
//// `define HCODEC_DBLK_QUANT            8'h76 // ONLY for $ucode/real/amrisc/rv.s, reg value from apollo
//
////`define HCODEC_ANC1_CANVAS_ADDR      8'h80
////`define HCODEC_ANC2_CANVAS_ADDR      8'h81
//
////`define HCODEC_REC_CANVAS_ADDR       8'h89
//
////`define HCODEC_MDEC_PIC_W          8'h8c
////`define HCODEC_MDEC_PIC_H          8'h8d
//`define HCODEC_MDEC_PIC_DC_CTRL    8'h8e
//`define HCODEC_MDEC_PIC_DC_STATUS  8'h8f
//
//`define HCODEC_ANC0_CANVAS_ADDR      8'h90
//`define HCODEC_ANC1_CANVAS_ADDR      8'h91
//`define HCODEC_ANC2_CANVAS_ADDR      8'h92
//`define HCODEC_ANC3_CANVAS_ADDR      8'h93
//`define HCODEC_ANC4_CANVAS_ADDR      8'h94
//`define HCODEC_ANC5_CANVAS_ADDR      8'h95
//`define HCODEC_ANC6_CANVAS_ADDR      8'h96
//`define HCODEC_ANC7_CANVAS_ADDR      8'h97
//`define HCODEC_ANC8_CANVAS_ADDR      8'h98
//`define HCODEC_ANC9_CANVAS_ADDR      8'h99
//`define HCODEC_ANC10_CANVAS_ADDR     8'h9a
//`define HCODEC_ANC11_CANVAS_ADDR     8'h9b
//`define HCODEC_ANC12_CANVAS_ADDR     8'h9c
//`define HCODEC_ANC13_CANVAS_ADDR     8'h9d
//`define HCODEC_ANC14_CANVAS_ADDR     8'h9e
//`define HCODEC_ANC15_CANVAS_ADDR     8'h9f
//`define HCODEC_ANC16_CANVAS_ADDR     8'ha0
//`define HCODEC_ANC17_CANVAS_ADDR     8'ha1
//`define HCODEC_ANC18_CANVAS_ADDR     8'ha2
//`define HCODEC_ANC19_CANVAS_ADDR     8'ha3
//`define HCODEC_ANC20_CANVAS_ADDR     8'ha4
//`define HCODEC_ANC21_CANVAS_ADDR     8'ha5
//`define HCODEC_ANC22_CANVAS_ADDR     8'ha6
//`define HCODEC_ANC23_CANVAS_ADDR     8'ha7
//`define HCODEC_ANC24_CANVAS_ADDR     8'ha8
//`define HCODEC_ANC25_CANVAS_ADDR     8'ha9
//`define HCODEC_ANC26_CANVAS_ADDR     8'haa
//`define HCODEC_ANC27_CANVAS_ADDR     8'hab
//`define HCODEC_ANC28_CANVAS_ADDR     8'hac
//`define HCODEC_ANC29_CANVAS_ADDR     8'had
//`define HCODEC_ANC30_CANVAS_ADDR     8'hae
//`define HCODEC_ANC31_CANVAS_ADDR     8'haf
//
//`define HCODEC_DBKR_CANVAS_ADDR      8'hb0
//`define HCODEC_DBKW_CANVAS_ADDR      8'hb1
//`define HCODEC_REC_CANVAS_ADDR       8'hb2
//
////28:24, read/write, current canvas idx, used in h264 only now
////23:0, read only, current canvas address, 23:16, Cr canvas addr, 15:8, Cb canvas addr, 7:0, Y  canvas addr
//`define HCODEC_CURR_CANVAS_CTRL      8'hb3
//
//`define HCODEC_MDEC_PIC_DC_THRESH    8'hb8
//`define HCODEC_MDEC_PICR_BUF_STATUS  8'hb9
//`define HCODEC_MDEC_PICW_BUF_STATUS  8'hba
//`define HCODEC_MCW_DBLK_WRRSP_CNT    8'hbb
//
//`define HCODEC_AV_SCRATCH_0          8'hc0
//`define HCODEC_AV_SCRATCH_1          8'hc1
//`define HCODEC_AV_SCRATCH_2          8'hc2
//`define HCODEC_AV_SCRATCH_3          8'hc3
//`define HCODEC_AV_SCRATCH_4          8'hc4
//`define HCODEC_AV_SCRATCH_5          8'hc5
//`define HCODEC_AV_SCRATCH_6          8'hc6
//`define HCODEC_AV_SCRATCH_7          8'hc7
//`define HCODEC_AV_SCRATCH_8          8'hc8
//`define HCODEC_AV_SCRATCH_9          8'hc9
//`define HCODEC_AV_SCRATCH_A          8'hca
//`define HCODEC_AV_SCRATCH_B          8'hcb
//`define HCODEC_AV_SCRATCH_C          8'hcc
//`define HCODEC_AV_SCRATCH_D          8'hcd
//`define HCODEC_AV_SCRATCH_E          8'hce
//`define HCODEC_AV_SCRATCH_F          8'hcf
//`define HCODEC_AV_SCRATCH_G          8'hd0
//`define HCODEC_AV_SCRATCH_H          8'hd1
//`define HCODEC_AV_SCRATCH_I          8'hd2
//`define HCODEC_AV_SCRATCH_J          8'hd3
//`define HCODEC_AV_SCRATCH_K          8'hd4
//`define HCODEC_AV_SCRATCH_L          8'hd5
//`define HCODEC_AV_SCRATCH_M          8'hd6
//`define HCODEC_AV_SCRATCH_N          8'hd7
//
//// bit[29:24] A_brst_num_co_mb
//// bit[21:16] A_id_co_mb
//// bit[11:0] wrrsp_count_co_mb
//`define HCODEC_WRRSP_CO_MB           8'hd8
//// bit[29:24] A_brst_num_dcac
//// bit[21:16] A_id_dcac
//// bit[11:0] wrrsp_count_dcac
//`define HCODEC_WRRSP_DCAC            8'hd9
//
////======================================
////  MC Control Register Bits
////
////======================================
//// For bits, just copy the defines...don't translate to addresses
//    `define HCODEC_MC_ENABLE	    16'h0001
//    //`define MC_RESET	    16'h0002
//    `define HCODEC_SKIP_MB		    16'h0004
//
////======================================
////  MB Info Register Bits
////
////======================================
//    `define HCODEC_INTRA_MB	    16'h0001
//
//    `define HCODEC_BWD_PRED	    16'h0004
//    `define HCODEC_FWD_PRED	    16'h0008
//
//    `define HCODEC_FLD_MOT		    16'h0100
//    `define HCODEC_FRM_16x8_MOT	16'h0200
//    `define HCODEC_DUAL_PRM_MOT	16'h0300
//
//    `define HCODEC_FRM_DCT		    16'h0000	    // Bit 10
//    `define HCODEC_FLD_DCT		    16'h0400
//
////======================================
////  MB Info Register Bits
////
////======================================
//    `define HCODEC_I_PIC		    16'h0001
//    `define HCODEC_P_PIC		    16'h0002
//    `define HCODEC_B_PIC		    16'h0003
//
//    `define HCODEC_FLD_PIC		    16'h0000	    // Bit 8
//    `define HCODEC_FRM_PIC		    16'h0100
//
////========================================================================
//// DBLK Register:  12'h950 - 12'h97f
////========================================================================
//`define HCODEC_DBLK_RST                8'h50
//`define HCODEC_DBLK_CTRL               8'h51
//`define HCODEC_DBLK_MB_WID_HEIGHT      8'h52
//`define HCODEC_DBLK_STATUS             8'h53
//`define HCODEC_DBLK_CMD_CTRL           8'h54
//`define HCODEC_DBLK_MB_XY              8'h55
//`define HCODEC_DBLK_QP                 8'h56
//`define HCODEC_DBLK_Y_BHFILT           8'h57
//`define HCODEC_DBLK_Y_BHFILT_HIGH      8'h58
//`define HCODEC_DBLK_Y_BVFILT           8'h59
//`define HCODEC_DBLK_CB_BFILT           8'h5a
//`define HCODEC_DBLK_CR_BFILT           8'h5b
//`define HCODEC_DBLK_Y_HFILT            8'h5c
//`define HCODEC_DBLK_Y_HFILT_HIGH       8'h5d
//`define HCODEC_DBLK_Y_VFILT            8'h5e
//`define HCODEC_DBLK_CB_FILT            8'h5f
//`define HCODEC_DBLK_CR_FILT            8'h60
//`define HCODEC_DBLK_BETAX_QP_SEL       8'h61
//`define HCODEC_DBLK_CLIP_CTRL0         8'h62
//`define HCODEC_DBLK_CLIP_CTRL1         8'h63
//`define HCODEC_DBLK_CLIP_CTRL2         8'h64
//`define HCODEC_DBLK_CLIP_CTRL3         8'h65
//`define HCODEC_DBLK_CLIP_CTRL4         8'h66
//`define HCODEC_DBLK_CLIP_CTRL5         8'h67
//`define HCODEC_DBLK_CLIP_CTRL6         8'h68
//`define HCODEC_DBLK_CLIP_CTRL7         8'h69
//`define HCODEC_DBLK_CLIP_CTRL8         8'h6a
//
//`define HCODEC_DBLK_STATUS1            8'h6b
//`define HCODEC_DBLK_GCLK_FREE          8'h6c
//`define HCODEC_DBLK_GCLK_OFF           8'h6d
//
//`define HCODEC_DBLK_AVSFLAGS           8'h6e
//
//// bit 15:0
//`define HCODEC_DBLK_CBPY               8'h70
//// bit 11:8 -- deblk_cbpy_bottom
//// bit 7:4 -- deblk_cbpy_left
//// bit 3:0 -- deblk_cbpy_top
//`define HCODEC_DBLK_CBPY_ADJ           8'h71
//// bit 7:0 -- deblk_cbpc
//`define HCODEC_DBLK_CBPC               8'h72
//// bit 15 -- bottom_mb
//// bit 14 -- left_mb
//// bit 13 -- top_mb
//// bit 12 -- reserved
//// bit 11:8 -- deblk_cbpc_bottom
//// bit 7:4 -- deblk_cbpc_left
//// bit 3:0 -- deblk_cbpc_top
//`define HCODEC_DBLK_CBPC_ADJ           8'h73
//// bit 15:8 -- deblk_hmvd   -- {left_1, left_0, below_1, below_0, block3-0}
//// bit 7:0 -- deblk_vmvd    -- {top_1, top_0, below_1, below_0, block3-0}
//`define HCODEC_DBLK_VHMVD              8'h74
//// bit 13:12 -- right_vmvd
//// bit 11 -- right_above_vmvd
//// bit 10 -- left_below_hmvd
//// bit 9 -- disable_dblk_luma
//// bit 8 -- disable_dblk_chroma
//// bit 7 -- bBelowRefDiff
//// bit 6 -- bLeftRefDiff
//// bit 5 -- bAboveRefDiff
//// bit 4 -- reserved
//// bit 3 -- s_below
//// bit 2 -- s_left
//// bit 1 -- s_above
//// bit 0 -- s
//`define HCODEC_DBLK_STRONG             8'h75
//// bit 14:10 -- PQUANT
//// bit 9:5 -- left_PQUANT
//// bit 4:0 -- top_PQUANT
//`define HCODEC_DBLK_RV8_QUANT          8'h76
//
//`define HCODEC_DBLK_CBUS_HCMD2         8'h77
//`define HCODEC_DBLK_CBUS_HCMD1         8'h78
//`define HCODEC_DBLK_CBUS_HCMD0         8'h79
//`define HCODEC_DBLK_VLD_HCMD2          8'h7a
//`define HCODEC_DBLK_VLD_HCMD1          8'h7b
//`define HCODEC_DBLK_VLD_HCMD0          8'h7c
//
//`define HCODEC_DBLK_OST_YBASE          8'h7d
//`define HCODEC_DBLK_OST_CBCRDIFF       8'h7e
//
////13:8 dblk thread ID and token
////5:0  dblk prearbitor burst num
//`define HCODEC_DBLK_CTRL1              8'h7f
//
////DBLK last address 12'h97f
//
// Closing file:  hcodec_mdec_regs.h
//
//------------------------------------------------------------------------------
// HCODEC VLD module level register offset
//------------------------------------------------------------------------------
//
// Reading file:  hcodec_vld_regs.h
//
//========================================================================
//  VLD module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_HCODEC_VLD_CBUS_BASE = 0x0c
// -----------------------------------------------
//
//`define HCODEC_VLD_STATUS_CTRL     8'h00
////
//// bit 10 -- use_old_shift_en
//// bit 9 -- output_mv_not_pmv
//// bit 8:5 -- force_zigzag
//// bit 4 -- force_zigzag_en
//// bit 3 -- disable_viff_anempty_int
//// bit 2 -- disable_m2_ac_coeff_one_cycle
//// bit 1 -- forced_reset  force reset pmv
//// bit 0 -- mpeg_type  0:mpeg1 1: mpeg2
//`define HCODEC_MPEG1_2_REG         8'h01
//`define HCODEC_F_CODE_REG          8'h02
//`define HCODEC_PIC_HEAD_INFO       8'h03
//`define HCODEC_SLICE_VER_POS_PIC_TYPE  8'h04
//`define HCODEC_QP_VALUE_REG        8'h05
//`define HCODEC_MBA_INC             8'h06
//`define HCODEC_MB_MOTION_MODE      8'h07
////`define HCODEC_PACKET_BYTE_COUNT   8'h08
//// bit 15 -- force_search_startcode_en
//// bit 14 -- int_cpu_when_error (before do anything)
//// bit 13 -- vld_error_reset
//// bit 12 -- return_on_slice_header
//// bit 6 -- jpeg_ff00_en
//// bit 5:0 -- vld_power_ctl
//`define HCODEC_POWER_CTL_VLD       8'h08
//
//`define HCODEC_MB_WIDTH	    8'h09
//`define HCODEC_SLICE_QP            8'h0a
//// `define HCODEC_MB_X_MB_Y           8'h0b   // current MBX and MBY
//`define HCODEC_PRE_START_CODE      8'h0b  // ONLY for $ucode/real/amrisc/rv.s, reg value from apollo
//`define HCODEC_SLICE_START_BYTE_01 8'h0c  // ONLY for $ucode/real/amrisc/rv.s, reg value from apollo
//`define HCODEC_SLICE_START_BYTE_23 8'h0d  // ONLY for $ucode/real/amrisc/rv.s, reg value from apollo
//`define HCODEC_RESYNC_MARKER_LENGTH 8'h0e  // Does this exist in HW ? used in $ucode/mpeg4
//
//// bit[6:5] - frame/field info, 01 - top, 10 - bottom, 11 - frame
//// bit[4:0] - buffer ID
//// L0_BUFF_ID_0, L0_BUFF_ID_1, L1_BUFF_ID_0, L1_BUFF_ID_1
//`define HCODEC_DECODER_BUFFER_INFO  8'h0f  // Current Only Used for VC1 Interlace Field
//
//`define HCODEC_FST_FOR_MV_X        8'h10
//`define HCODEC_FST_FOR_MV_Y        8'h11
//`define HCODEC_SCD_FOR_MV_X        8'h12
//`define HCODEC_SCD_FOR_MV_Y        8'h13
//`define HCODEC_FST_BAK_MV_X        8'h14
//`define HCODEC_FST_BAK_MV_Y        8'h15
//`define HCODEC_SCD_BAK_MV_X        8'h16
//`define HCODEC_SCD_BAK_MV_Y        8'h17
//
//// Bit 7:4 -- read_buffer_interlace  0-progressive, 1-interlace, used in VC1
//// bit 3 -- reserved
//// bit 2 -- weighting_prediction
//// bit 1 -- mb_weighting_flag
//// bit 0 -- slice_weighting_flag
//`define HCODEC_VLD_DECODE_CONTROL  8'h18
//`define HCODEC_VLD_REVERVED_19     8'h19
//
//`define HCODEC_VIFF_BIT_CNT        8'h1a
//`define HCODEC_BYTE_ALIGN_PEAK_HI  8'h1b
//`define HCODEC_BYTE_ALIGN_PEAK_LO  8'h1c
//`define HCODEC_NEXT_ALIGN_PEAK     8'h1d  // Does this exist in HW ? used in $ucode/mpeg4
//
//// bit 19    : vc1_inv_intra_co_mb_ref_rd
//// bit 18    : vc1_inv_co_mb_ref_rd
//// bit 17    : vc1_inv_intra_co_mb_ref_wr
//// bit 16    : vc1_inv_co_mb_ref_wr
//// bit 15    : reserved
//// bit 14    : avs_drop_enable
//// bit 13:12 : avs_drop_ptr
//// bit 11:8  : avs_demu_ctl_reg
//// bit 7 : avs_enable
//// bit 6 : disable_dblk_hcmd
//// bit 5 : disable_mc_hcmd
//// bit 4 : first_mode3_set enable
//// bit 3 : first_mode3
//// bit 2:1 : vc1_profile  0-SP, 1-MP, 2-reserved, 3-AP
//// bit 0   : vc1_enable
//`define HCODEC_VC1_CONTROL_REG     8'h1e
//
//`define HCODEC_PMV1_X              8'h20
//`define HCODEC_PMV1_Y              8'h21
//`define HCODEC_PMV2_X              8'h22
//`define HCODEC_PMV2_Y              8'h23
//`define HCODEC_PMV3_X              8'h24
//`define HCODEC_PMV3_Y              8'h25
//`define HCODEC_PMV4_X              8'h26
//`define HCODEC_PMV4_Y              8'h27
//// Can't use the same address for different defines
//// Therefore, create a single define HCODEC_that covers both
//// Only appears to be used in micro-code since the VLD hardware is
//// hard coded.
//// `define HCODEC_M4_TABLE_SELECT     8'h28  // Does this exist in HW ? Added from register_mp2.h
//// `define HCODEC_M4_TABLE_OUTPUT     8'h28  // Does this exist in HW ? Added from register_mp2.h
//`define HCODEC_M4_TABLE_SELECT     8'h28
//`define HCODEC_M4_CONTROL_REG      8'h29
//`define HCODEC_BLOCK_NUM           8'h2a  // Does this exist in HW ? Added from register_mp2.h
//`define HCODEC_PATTERN_CODE        8'h2b  // Does this exist in HW ? Added from register_mp2.h
//`define HCODEC_MB_INFO             8'h2c  // Does this exist in HW ? Added from register_mp2.h
//`define HCODEC_VLD_DC_PRED         8'h2d  // Does this exist in HW ? Added from register_mp4.h
//`define HCODEC_VLD_ERROR_MASK      8'h2e
//`define HCODEC_VLD_DC_PRED_C       8'h2f  // Does this exist in HW ? Added from register_mp4.h
//
//`define HCODEC_LAST_SLICE_MV_ADDR  8'h30
//`define HCODEC_LAST_MVX            8'h31
//`define HCODEC_LAST_MVY            8'h32
//
//`define HCODEC_VLD_C38             8'h38
//`define HCODEC_VLD_C39             8'h39
//
//`define HCODEC_VLD_STATUS          8'h3a  // Does this exist in HW ? used in $ucode/real/amrisc/rv.s
//`define HCODEC_VLD_SHIFT_STATUS    8'h3b  // Does this exist in HW ? used in $ucode/real/amrisc/rv.s
//// `define HCODEC_VLD_SHIFT_INFO      8'h3b  // Does this exist in HW ? used in $ucode/mpeg4
//`define HCODEC_VOFF_STATUS         8'h3c  // Does this exist in HW ? used in $ucode/mpeg4
//
//`define HCODEC_VLD_C3D             8'h3d
//
//`define HCODEC_VLD_DBG_INDEX       8'h3e
//
//
//// vld_buff_info -- (index == 0)
//// Bit[7:6]  mv_UR_ready_cnt;
//// Bit[5]  vld_wr_idx
//// Bit[4]  iq_rd_idx
//// Bit[3]  vld_vi_block_rdy_1
//// Bit[2]  vld_vi_block_rdy_2
//// Bit[1]  voff_empty_1
//// Bit[0]  voff_empty_2
//
//// cabac_buff_info_0 -- (index == 1)
//// Bit[31] shift_data_ready
//// Bit[30:29] Reserved
//// Bit[28:24] cabac_buffer_ptr
//// Bit[23:0] cabac_buffer
//
//// cabac_buff_info_1 -- (index == 2)
//// Bit[31:29] Reserved
//// Bit[28:20] Drange
//// Bit[19:16] bin_count_4
//// Bit[15:13] Reserved
//// Bit[12:6] context_mem_do
//// Bit[5:3] coeff_state
//// Bit[2:0] mvd_state
//
//// h264_mv_present -- (index == 3)
//// Bit[31:16] mv_present_l0
//// Bit[15:0] mv_present_l1
//
//// h264_mv_cal_info_0 -- (index == 4)
//// [31:28] mv_cal_state
//// [27:24] direct_spatial_cnt
//// Bit[23:21] Reserved
//// Bit[20] mv_UR_ready_for_mv_cal
//// Bit[19] co_mb_mem_ready_for_mv_cal
//// Bit[18] mc_dblk_cmd_if_busy
//// Bit[17] h264_co_mb_wr_busy
//// Bit[16] H264_cbp_blk_ready
//// Bit[15] mc_hcmd_rrdy
//// Bit[14] mc_hcmd_srdy
//// Bit[13] mc_cmd_if_ready
//// Bit[12] mc_hcmd_mv_available
//// Bit[11:8] mc_cmd_if_state
//// Bit[7] dblk_hcmd_rrdy
//// Bit[6] dblk_hcmd_srdy
//// Bit[5] dblk_cmd_if_ready
//// Bit[4] dblk_hcmd_mv_available
//// Bit[3:0] dblk_cmd_if_state
//
//// h264_mv_cal_info_1 -- (index == 5)
////  Bit[31:29] Reserved
////  Bit[28:24] total_mvd_num_l0
////  Bit[23:21] Reserved
////  Bit[20:16] mv_cal_ptr_l0
////  Bit[15:13] Reserved
////  Bit[12:8] mc_hcmd_ptr_l0
////  Bit[7:5] Reserved
////  Bit[4:0] dblk_hcmd_ptr_l0
//
//// h264_mv_cal_info_2 -- (index == 6)
////  Bit[31:29] Reserved
////  Bit[28:24] total_mvd_num_l1
////  Bit[23:21] Reserved
////  Bit[20:16] mv_cal_ptr_l1
////  Bit[15:13] Reserved
////  Bit[12:8] mc_hcmd_ptr_l1
////  Bit[7:5] Reserved
////  Bit[4:0] dblk_hcmd_ptr_l1
//
//// h264_co_mb_info -- (index == 7)
//// Bit[31:26] Reserved
//// Bit[25] mv_scale_cal_busy
//// Bit[24:20] co_mv_count
//// Bit[19:16] co_mv_process_state
//// Bit[15] h264_co_mb_rd_busy
//// Bit[15] h264_co_mb_rd_ready
//// Bit[13:12] co_mv_transfer_block_cnt
//// Bit[11:8] co_mv_transfer_ptr
//// Bit[7] co_mv_POC_l1_busy
//// Bit[6] h264_weight_scale_cal_en
//// Bit[5] weight_cal_busy
//// Bit[4] weight_cal_not_finished
//// Bit[3:0] weight_process_state
//
//`define HCODEC_VLD_DBG_DATA        8'h3f
//// --------------------------------------------
//// VIFIFO DDR Interface
//// --------------------------------------------
//// The VIFIFO start pointer into DDR memory is a 32-bit number
//// The Start pointer will automatically be truncated to land on
//// an 8-byte boundary.  That is, bits [2:0] = 0;
//`define HCODEC_VLD_MEM_VIFIFO_START_PTR        8'h40
//// The current pointer points so some location between the START and END
//// pointers.  The current pointer is a BYTE pointer.  That is, you can
//// point to any BYTE address within the START/END range
//`define HCODEC_VLD_MEM_VIFIFO_CURR_PTR         8'h41
//`define HCODEC_VLD_MEM_VIFIFO_END_PTR          8'h42
//`define HCODEC_VLD_MEM_VIFIFO_BYTES_AVAIL      8'h43
//// VIFIFO FIFO Control
//// bit  [31:24] viff_empty_int_enable_cpu[7:0]
//// bit  [23:16] viff_empty_int_enable_amrisc[7:0]
////   -bit 23 Video BUFFER < 0x400 Bytes
////   -bit 22 Video BUFFER < 0x200 Bytes
////   -bit 21 Video BUFFER < 0x100 Bytes
////   -bit 20 Video BUFFER < 0x80 Bytes
////   -bit 19 Video BUFFER < 0x40 Bytes
////   -bit 18 Video BUFFER < 0x20 Bytes
////   -bit 17 vififo  < 16 double words
////   -bit 16 vififo  < 8 double words
//// bit  [15:13] unused
//// bit  [12]    A_urgent
//// bit  [11]    transfer_length 0 - 32x64 Bits per request, 1 - 16x64 Bits per request
//// bit  [10]    use_level       Set this bit to 1 to enable filling of the FIFO controlled by the buffer
////                              level control.  If this bit is 0, then use bit[1] to control the enabling of filling
//// bit  [9]     Data Ready.     This bit is set when data can be popped
//// bit  [8]     fill busy       This bit will be high when we're fetching data from the DDR memory
////                              To reset this module, set cntl_enable = 0, and then wait for busy = 0.
////                              After that you can pulse cntl_init to start over
//// bit  [7]     init_with_cntl_init
//// bit  [6]     reserved
//// bits [5:3]   endian:         see $lib/rtl/ddr_endian.v
//// bit  [2]     cntl_empty_en   Set to 1 to enable reading the DDR memory FIFO
////                              Set cntl_empty_en = cntl_fill_en = 0 when pulsing cntl_init
//// bit  [1]     cntl_fill_en    Set to 1 to enable reading data from DDR memory
//// bit  [0]     cntl_init:      After setting the read pointers, sizes, channel masks
////                              and read masks, set this bit to 1 and then to 0
////                              NOTE:  You don't need to pulse cntl_init if only the start address is
////                              being changed
//`define HCODEC_VLD_MEM_VIFIFO_CONTROL         8'h44
//// --------------------------------------------
//// VIFIFO Buffer Level Manager
//// --------------------------------------------
//`define HCODEC_VLD_MEM_VIFIFO_WP              8'h45 // Manual or Parser write pointer
//`define HCODEC_VLD_MEM_VIFIFO_RP              8'h46
//`define HCODEC_VLD_MEM_VIFIFO_LEVEL           8'h47 // must be low first to shadow low/high 16-bit words
////
//// bit  [8]     use_parser_video2_wp
//// bit  [7]     vbuf2_out_manual
//// bit  [6]     vbuf_out_manual
//// bit  [5]     empty (ReadOnly)
//// bit  [4]     full (ReadOnly)
//// bit  [3:2]   reserved
//// bit  [1]     manual mode     Set to 1 for manual write pointer mode
//// bit  [0]     Init            Set high then low after everything has been initialized
//`define HCODEC_VLD_MEM_VIFIFO_BUF_CNTL        8'h48
//
//// bit 31:16 -- drop_bytes
//// bit 15:14 -- drop_status (Read-Only)
//// bit 13:12 -- sync_match_position (Read-Only)
//// bit 11:6 -- reserved
//// bit 5:4 -- TIME_STAMP_NUMBER, 0-32bits, 1-64bits, 2-96bits, 3-128bits
//// bit 3 -- stamp_soft_reset
//// bit 2 -- TIME_STAMP_length_enable
//// bit 1 -- TIME_STAMP_sync64_enable
//// bit 0 -- TIME_STAMP_enable
//`define HCODEC_VLD_TIME_STAMP_CNTL            8'h49
//// bit 31:0 -- TIME_STAMP_SYNC_CODE_0
//`define HCODEC_VLD_TIME_STAMP_SYNC_0          8'h4a
//// bit 31:0 -- TIME_STAMP_SYNC_CODE_1
//`define HCODEC_VLD_TIME_STAMP_SYNC_1          8'h4b
//// bit 31:0 TIME_STAMP_0
//`define HCODEC_VLD_TIME_STAMP_0               8'h4c
//// bit 31:0 TIME_STAMP_1
//`define HCODEC_VLD_TIME_STAMP_1               8'h4d
//// bit 31:0 TIME_STAMP_2
//`define HCODEC_VLD_TIME_STAMP_2               8'h4e
//// bit 31:0 TIME_STAMP_3
//`define HCODEC_VLD_TIME_STAMP_3               8'h4f
//// bit 31:0 TIME_STAMP_LENGTH
//`define HCODEC_VLD_TIME_STAMP_LENGTH          8'h50
//
//// bit 15:0 vififo_rd_count
//`define HCODEC_VLD_MEM_VIFIFO_WRAP_COUNT      8'h51
//
//// bit 29:24 A_brst_num
//// bit 21:16 A_id
//// bit 15:0 level_hold
//`define HCODEC_VLD_MEM_VIFIFO_MEM_CTL         8'h52
//
//`define HCODEC_VLD_MEM_VBUF_RD_PTR            8'h53 // manual read address for VBUF1
//`define HCODEC_VLD_MEM_VBUF2_RD_PTR           8'h54 // manual read address for VBUF2
//
//`define HCODEC_VLD_MEM_SWAP_ADDR              8'h55
//// bit[23:16] - swap_d_count (Read Only)
//// bit[15:8]  - swap_a_count (Read Only)
//// bit [7] - swap busy (Read Only)
//// bit [6:2] - reserved
//// bit [1] - 1 - STORE to Memory, 0 - LOAD from Memory
//// bit [0] - swap active
//`define HCODEC_VLD_MEM_SWAP_CTL               8'h56
//
// Closing file:  hcodec_vld_regs.h
//
//------------------------------------------------------------------------------
// HCODEC IQIDCT module level register offset
//------------------------------------------------------------------------------
//
// Reading file:  hcodec_iqidct_regs.h
//
//========================================================================
//  IQ/IDCT module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_HCODEC_IQIDCT_CBUS_BASE = 0x0e
// -----------------------------------------------
//
//`define HCODEC_VCOP_CTRL_REG       8'h00
//`define HCODEC_QP_CTRL_REG         8'h01
//`define HCODEC_INTRA_QUANT_MATRIX  8'h02
//`define HCODEC_NON_I_QUANT_MATRIX  8'h03
//`define HCODEC_DC_SCALER           8'h04
//`define HCODEC_DC_AC_CTRL          8'h05
//// `define HCODEC_RV_AI_CTRL          8'h05  // ONLY for $ucode/real/amrisc/rv.s reg value from apollo
//`define HCODEC_DC_AC_SCALE_MUL     8'h06
//`define HCODEC_DC_AC_SCALE_DIV     8'h07
//// `define HCODEC_DC_AC_SCALE_RESULT  8'h06
//// `define HCODEC_RESERVED_E07        8'h07
//`define HCODEC_POWER_CTL_IQIDCT    8'h08
//`define HCODEC_RV_AI_Y_X           8'h09
//`define HCODEC_RV_AI_U_X           8'h0a
//`define HCODEC_RV_AI_V_X           8'h0b
//// bit 15:0 will count up when rv_ai_mb finished when non zero
//// and rv_ai_mb_finished_int will be generate when this is not zero
//`define HCODEC_RV_AI_MB_COUNT      8'h0c
//// For H264 I in PB picture Use -- dma type : h264_next_intra_dma
//`define HCODEC_NEXT_INTRA_DMA_ADDRESS 8'h0d
//// Bit 0 -- constrained_intra_pred_flag for H264
//`define HCODEC_IQIDCT_CONTROL         8'h0e
//
//
//// Bit[31:19] Reserved
//// Bit[18] iq_waiting
//// Bit[17] iq_om_wr_idx
//// Bit[16] iq_om_rd_idx
//// Bit[15] iq_om_busy
//// Bit[14] iq_om_2_busy
//// Bit[13] idx_fifo_0
//// Bit[12] idx_fifo_1
//// Bit[11] idx_fifo_2
//// Bit[10] idx_fifo_3
//// Bit[9] idx_fifo_4
//// Bit[8] idx_fifo_5
//// Bit[7] idx_fifo_6
//// Bit[6] idx_fifo_7
//// Bit[5:3] idx_fifo_wp
//// Bit[2:0] idx_fifo_rp
//
//`define HCODEC_IQIDCT_DEBUG_INFO_0    8'h0f
//
//// For RTL Simulation Only
//`define HCODEC_DEBLK_CMD              8'h10
//
//// Bit[15+16] ds_mc_valid_2
//// Bit[14+16] new_idct1_rd_idx_2
//// Bit[13+16] new_idct1_wr_idx_2
//// Bit[12+16] idct1_buff0_busy_2
//// Bit[11+16] idct1_buff1_busy_2
//// Bit[10+16] new_idct1_busy_2
//// Bit[9+16] iq_om_8val_2
//// Bit[8+16] idct1_pipe_busy_2
//
//// Bit[7+16] wait_mb_left_finish_hold_2
//// Bit[6+16] new_idct2_rd_idx_2
//// Bit[5+16] new_idct2_wr_idx_2
//// Bit[4+16] idct2_buff0_busy_2
//// Bit[3+16] idct2_buff1_busy_2
//// Bit[2+16] idct2_en_2
//// Bit[1+16] new_idct2_busy_2
//// Bit[0+16] new_idct1_ready_2
//
//// Bit[15] ds_mc_valid_1
//// Bit[14] new_idct1_rd_idx_1
//// Bit[13] new_idct1_wr_idx_1
//// Bit[12] idct1_buff0_busy_1
//// Bit[11] idct1_buff1_busy_1
//// Bit[10] new_idct1_busy_1
//// Bit[9] iq_om_8val_1
//// Bit[8] idct1_pipe_busy_1
//
//// Bit[7] wait_mb_left_finish_hold_1
//// Bit[6] new_idct2_rd_idx_1
//// Bit[5] new_idct2_wr_idx_1
//// Bit[4] idct2_buff0_busy_1
//// Bit[3] idct2_buff1_busy_1
//// Bit[2] idct2_en_1
//// Bit[1] new_idct2_busy_1
//// Bit[0] new_idct1_ready_1
//
//`define HCODEC_IQIDCT_DEBUG_IDCT      8'h11
//
//
//
//// bit 31 -- convas_enable
//// bit 30:24 -- convas_x_count ( 8 pixels / 64 bits )
//// bit 23:16 -- convas_y_count
//// bit 15   -- dcac_dma_busy
//// bit 14   -- dcac_dma_urgent
//// bit 13:8 -- dcac_dma_count
//// bit 7    -- dcac_dma_rw
//// bit 6    -- dcac_skip_read_mode
//// bit 5:0  -- dcac_dma_offset
//`define HCODEC_DCAC_DMA_CTRL        8'h12
//// when (convas_enable == 0 )
////   bit 31:0 dcac_dma_addr
//// when (convas_enable == 1 )
////   bit 31:25 canvas_addr (7 bits)
////   bit 24:12 convas_y_start ( 13 btis )
////   bit 11:0  convas_x_start ( 12 btis )
//`define HCODEC_DCAC_DMA_ADDRESS     8'h13
//// bit 7:0 -- dcac_cpu_addr
//`define HCODEC_DCAC_CPU_ADDRESS     8'h14
//// bit 31:0 -- dcac_cpu_data
//`define HCODEC_DCAC_CPU_DATA        8'h15
//
//// bit 31:19 -- reserved
//// bit 18:16 -- block_num_reg -- Read-Only
//// bit 15:0 -- dcac_mb_count
//`define HCODEC_DCAC_MB_COUNT        8'h16
//
//// bit 31:18 -- reserved
//// For H264 :
////   bit 17:2 -- h264_quant
////   bit 11:6 -- h264_quant_c
////   bit  5:0 -- h264_quant_c
//// For VC1 :
////   bit    17 -- qindex_GT_8
////   bit    16 -- HalfQPStep
////   bit 15:12 -- eQuantMode
////   bit 11:6  -- AltPQuant
////   bit  5:0  -- PQuant
////
//`define HCODEC_IQ_QUANT             8'h17
//
//// bit 31:24  -- bitplane_width
//// bit 23:16  -- bitplane_height
//// bit 15:14  -- bitplane_start_x
//// bit 13:12  -- bitplane_start_y
//// bit 11:4   -- reserved
//// bit 3:1    -- bitplane_type
//// bit 0      -- bitplane_busy
//`define HCODEC_VC1_BITPLANE_CTL     8'h18
//
//
//
//    `define HCODEC_RAM_TEST_CMD        12'h002
//    `define HCODEC_RAM_TEST_ADDR       12'h003
//    `define HCODEC_RAM_TEST_DATAH      12'h004
//    `define HCODEC_RAM_TEST_DATAL      12'h005
//
//    `define HCODEC_RAM_TEST_RD_CMD	    16'h0000
//    `define HCODEC_RAM_TEST_WR_CMD	    16'h8000
//    `define HCODEC_IDCT_TM2_PT0	    16'h0001
//    `define HCODEC_IDCT_TM2_PT1	    16'h0002
//    `define HCODEC_IDCT_TM1_PT0	    16'h0004
//    `define HCODEC_IDCT_TM1_PT1	    16'h0008
//    `define HCODEC_IQ_OMEM_PT0	        16'h0010
//    `define HCODEC_IQ_OMEM_PT1	        16'h0020
//    `define HCODEC_MC_IMEM_PT0	        16'h0040
//    `define HCODEC_ALL_RAM_PTS	        16'h007f
//
////======================================
////  VCOP Control Register Bits
////
////======================================
//    //`define HCODEC_IQIDCT_RESET	    16'h0001	    // Bit 0
//    `define HCODEC_QM_WEN		    16'h0002	    // Bit 1
//    `define HCODEC_IQIDCT_ENABLE	    16'h0004	    // Bit 2
//    `define HCODEC_INTRA_QM	    16'h0008	    // Bit 3	0 = Use default; 1 = use loaded
//    `define HCODEC_NINTRA_QM	    16'h0010	    // Bit 4	0 = Use default; 1 = use loaded
//
////======================================
////  QP Control Register Bits
////
////======================================
//    `define HCODEC_INTRA_MODE	    16'h0080	    // Bit 7
//// Duplicate Address:  When actually used
//// please move to a different address
//// `define HCODEC_FLD_DCT_TYPE	    16'h0100	    // Bit 8	0 = Frame DCT; 1 = field DCT
//
//
// Closing file:  hcodec_iqidct_regs.h
//
//------------------------------------------------------------------------------
// HCODEC IQIDCT module level register offset
//------------------------------------------------------------------------------
//
// Reading file:  hcodec_vcpu_regs.h
//
//========================================================================
//  VCPU module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_HCODEC_VCPU_CBUS_BASE = 0x03
// -----------------------------------------------
//`define HCODEC_MSP                 8'h00
//`define HCODEC_MPSR                8'h01
//`define HCODEC_MINT_VEC_BASE       8'h02
//`define HCODEC_MCPU_INTR_GRP       8'h03
//`define HCODEC_MCPU_INTR_MSK       8'h04
//`define HCODEC_MCPU_INTR_REQ       8'h05
//`define HCODEC_MPC_P               8'h06
//`define HCODEC_MPC_D               8'h07
//`define HCODEC_MPC_E			    8'h08
//`define HCODEC_MPC_W			    8'h09
//`define HCODEC_MINDEX0_REG			8'h0a
//`define HCODEC_MINDEX1_REG			8'h0b
//`define HCODEC_MINDEX2_REG			8'h0c
//`define HCODEC_MINDEX3_REG			8'h0d
//`define HCODEC_MINDEX4_REG			8'h0e
//`define HCODEC_MINDEX5_REG			8'h0f
//`define HCODEC_MINDEX6_REG			8'h10
//`define HCODEC_MINDEX7_REG			8'h11
//`define HCODEC_MMIN_REG			8'h12
//`define HCODEC_MMAX_REG			8'h13
//`define HCODEC_MBREAK0_REG			8'h14
//`define HCODEC_MBREAK1_REG			8'h15
//`define HCODEC_MBREAK2_REG			8'h16
//`define HCODEC_MBREAK3_REG			8'h17
//`define HCODEC_MBREAK_TYPE			8'h18
//`define HCODEC_MBREAK_CTRL			8'h19
//`define HCODEC_MBREAK_STAUTS		8'h1a
//`define HCODEC_MDB_ADDR_REG		8'h1b
//`define HCODEC_MDB_DATA_REG		8'h1c
//`define HCODEC_MDB_CTRL			8'h1d
//`define HCODEC_MSFTINT0            8'h1e
//`define HCODEC_MSFTINT1            8'h1f
//
//`define HCODEC_CSP                 8'h20
//`define HCODEC_CPSR                8'h21
//`define HCODEC_CINT_VEC_BASE       8'h22
//`define HCODEC_CCPU_INTR_GRP       8'h23
//`define HCODEC_CCPU_INTR_MSK       8'h24
//`define HCODEC_CCPU_INTR_REQ       8'h25
//`define HCODEC_CPC_P               8'h26
//`define HCODEC_CPC_D               8'h27
//`define HCODEC_CPC_E			    8'h28
//`define HCODEC_CPC_W			    8'h29
//`define HCODEC_CINDEX0_REG			8'h2a
//`define HCODEC_CINDEX1_REG			8'h2b
//`define HCODEC_CINDEX2_REG			8'h2c
//`define HCODEC_CINDEX3_REG			8'h2d
//`define HCODEC_CINDEX4_REG			8'h2e
//`define HCODEC_CINDEX5_REG			8'h2f
//`define HCODEC_CINDEX6_REG			8'h30
//`define HCODEC_CINDEX7_REG			8'h31
//`define HCODEC_CMIN_REG			8'h32
//`define HCODEC_CMAX_REG			8'h33
//`define HCODEC_CBREAK0_REG			8'h34
//`define HCODEC_CBREAK1_REG			8'h35
//`define HCODEC_CBREAK2_REG			8'h36
//`define HCODEC_CBREAK3_REG			8'h37
//`define HCODEC_CBREAK_TYPE			8'h38
//`define HCODEC_CBREAK_CTRL			8'h39
//`define HCODEC_CBREAK_STAUTS		8'h3a
//`define HCODEC_CDB_ADDR_REG		8'h3b
//`define HCODEC_CDB_DATA_REG		8'h3c
//`define HCODEC_CDB_CTRL			8'h3d
//`define HCODEC_CSFTINT0            8'h3e
//`define HCODEC_CSFTINT1            8'h3f
//
//`define HCODEC_IMEM_DMA_CTRL       8'h40
//`define HCODEC_IMEM_DMA_ADR        8'h41
//`define HCODEC_IMEM_DMA_COUNT      8'h42
//// bit[29:24] A_brst_num_imem
//// bit[21:16] A_id_imem
//// bit[11:0] wrrsp_count_imem (reserved)
//`define HCODEC_WRRSP_IMEM          8'h43
//
//`define HCODEC_LMEM_DMA_CTRL       8'h50
//`define HCODEC_LMEM_DMA_ADR        8'h51
//`define HCODEC_LMEM_DMA_COUNT      8'h52
//// bit[29:24] A_brst_num_lmem
//// bit[21:16] A_id_lmem
//// bit[11:0] wrrsp_count_lmem
//`define HCODEC_WRRSP_LMEM          8'h53
//
//`define HCODEC_MAC_CTRL1			8'h60
//`define HCODEC_ACC0REG1			8'h61
//`define HCODEC_ACC1REG1			8'h62
//
//`define HCODEC_MAC_CTRL2			8'h70
//`define HCODEC_ACC0REG2			8'h71
//`define HCODEC_ACC1REG2			8'h72
//`define HCODEC_CPU_TRACE			8'h80
//
//
// Closing file:  hcodec_vcpu_regs.h
//
//------------------------------------------------------------------------------
// HEVC_ASSIST module level register offset
//------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  DOS_HEVC_ASSIST_CBUS_BASE = 0x00
// -----------------------------------------------
#define HEVC_ASSIST_AFIFO_CTRL                     ((0x3001  << 2) + 0xff620000)
#define HEVC_ASSIST_AFIFO_CTRL1                    ((0x3002  << 2) + 0xff620000)
#define HEVC_ASSIST_GCLK_EN                        ((0x3003  << 2) + 0xff620000)
#define HEVC_ASSIST_SW_RESET                       ((0x3004  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR1_INT0                      ((0x3025  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR1_INT1                      ((0x3026  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR1_INT2                      ((0x3027  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR1_INT3                      ((0x3028  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR1_INT4                      ((0x3029  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR1_INT5                      ((0x302a  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR1_INT6                      ((0x302b  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR1_INT7                      ((0x302c  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR1_INT8                      ((0x302d  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR1_INT9                      ((0x302e  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR1_INTA                      ((0x302f  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR1_INTB                      ((0x3030  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR1_INTC                      ((0x3031  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR1_INTD                      ((0x3032  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR1_INTE                      ((0x3033  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR1_INTF                      ((0x3034  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR2_INT0                      ((0x3035  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR2_INT1                      ((0x3036  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR2_INT2                      ((0x3037  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR2_INT3                      ((0x3038  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR2_INT4                      ((0x3039  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR2_INT5                      ((0x303a  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR2_INT6                      ((0x303b  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR2_INT7                      ((0x303c  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR2_INT8                      ((0x303d  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR2_INT9                      ((0x303e  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR2_INTA                      ((0x303f  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR2_INTB                      ((0x3040  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR2_INTC                      ((0x3041  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR2_INTD                      ((0x3042  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR2_INTE                      ((0x3043  << 2) + 0xff620000)
#define HEVC_ASSIST_AMR2_INTF                      ((0x3044  << 2) + 0xff620000)
#define HEVC_ASSIST_MBX_SSEL                       ((0x3045  << 2) + 0xff620000)
#define HEVC_ASSIST_TIMER0_LO                      ((0x3060  << 2) + 0xff620000)
#define HEVC_ASSIST_TIMER0_HI                      ((0x3061  << 2) + 0xff620000)
#define HEVC_ASSIST_TIMER1_LO                      ((0x3062  << 2) + 0xff620000)
#define HEVC_ASSIST_TIMER1_HI                      ((0x3063  << 2) + 0xff620000)
#define HEVC_ASSIST_DMA_INT                        ((0x3064  << 2) + 0xff620000)
#define HEVC_ASSIST_DMA_INT_MSK                    ((0x3065  << 2) + 0xff620000)
#define HEVC_ASSIST_DMA_INT2                       ((0x3066  << 2) + 0xff620000)
#define HEVC_ASSIST_DMA_INT_MSK2                   ((0x3067  << 2) + 0xff620000)
#define HEVC_ASSIST_MBOX0_IRQ_REG                  ((0x3070  << 2) + 0xff620000)
#define HEVC_ASSIST_MBOX0_CLR_REG                  ((0x3071  << 2) + 0xff620000)
#define HEVC_ASSIST_MBOX0_MASK                     ((0x3072  << 2) + 0xff620000)
#define HEVC_ASSIST_MBOX0_FIQ_SEL                  ((0x3073  << 2) + 0xff620000)
#define HEVC_ASSIST_MBOX1_IRQ_REG                  ((0x3074  << 2) + 0xff620000)
#define HEVC_ASSIST_MBOX1_CLR_REG                  ((0x3075  << 2) + 0xff620000)
#define HEVC_ASSIST_MBOX1_MASK                     ((0x3076  << 2) + 0xff620000)
#define HEVC_ASSIST_MBOX1_FIQ_SEL                  ((0x3077  << 2) + 0xff620000)
#define HEVC_ASSIST_MBOX2_IRQ_REG                  ((0x3078  << 2) + 0xff620000)
#define HEVC_ASSIST_MBOX2_CLR_REG                  ((0x3079  << 2) + 0xff620000)
#define HEVC_ASSIST_MBOX2_MASK                     ((0x307a  << 2) + 0xff620000)
#define HEVC_ASSIST_MBOX2_FIQ_SEL                  ((0x307b  << 2) + 0xff620000)
// bit[31:24] - read request
// bit[23:16] - write request
// bit[7] - disable_aml_axi_clk_gating
// bit[3:0] - arb_switch_cnt
#define HEVC_ASSIST_AXI_CTRL                       ((0x307c  << 2) + 0xff620000)
// bit[31:24] - read arb result
// bit[23:16] - write arb result
// bit[15:12] - read_ar_cnt
// bit[11:8] - write_aw_cnt
// bit[7] - arvalid_axi_s0
// bit[6] - arready_axi_s0
// bit[5] - awvalid_axi_s0
// bit[4] - awready_axi_s0
// bit[3:0] - write_fifo_cnt
#define HEVC_ASSIST_AXI_STATUS                     ((0x307d  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_0                      ((0x30c0  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_1                      ((0x30c1  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_2                      ((0x30c2  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_3                      ((0x30c3  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_4                      ((0x30c4  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_5                      ((0x30c5  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_6                      ((0x30c6  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_7                      ((0x30c7  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_8                      ((0x30c8  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_9                      ((0x30c9  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_A                      ((0x30ca  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_B                      ((0x30cb  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_C                      ((0x30cc  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_D                      ((0x30cd  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_E                      ((0x30ce  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_F                      ((0x30cf  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_G                      ((0x30d0  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_H                      ((0x30d1  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_I                      ((0x30d2  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_J                      ((0x30d3  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_K                      ((0x30d4  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_L                      ((0x30d5  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_M                      ((0x30d6  << 2) + 0xff620000)
#define HEVC_ASSIST_SCRATCH_N                      ((0x30d7  << 2) + 0xff620000)
//------------------------------------------------------------------------------
// HEVC_ASSIST module level register offset
// Same as VDEC/HCODEC to avoid confusing software guy
//------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  DOS_HEVC_VCPU_CBUS_BASE = 0x03
// -----------------------------------------------
//------------------------------------------------------------------------------
// HEVC_PARSER module level register offset
//------------------------------------------------------------------------------
//
// Reading file:  hevc_parser_regs.h
//
// -----------------------------------------------
// CBUS_BASE:  DOS_HEVC_PARSER_CBUS_BASE = 0x01
// -----------------------------------------------
// [31:0] After reset version, can be used for test scratch register
#define HEVC_PARSER_VERSION                        ((0x3100  << 2) + 0xff620000)
// [31:16] - axi_setting
// [15]    - disable_stream_clock_gating
// [14]    - wstrb_set
// [13]    - stream_read_pause
// [6:4]   - stream_fetch_endian
// [3]     - use_parser_vbuf_wp
// [2]     - use_parser_vbuf2_wp
// [1]     - stream_fetch_busy - Read Only
// [0]     - stream_fetch_enable
#define HEVC_STREAM_CONTROL                        ((0x3101  << 2) + 0xff620000)
#define HEVC_STREAM_START_ADDR                     ((0x3102  << 2) + 0xff620000)
#define HEVC_STREAM_END_ADDR                       ((0x3103  << 2) + 0xff620000)
// SW stream_buffer_wr_ptr
#define HEVC_STREAM_WR_PTR                         ((0x3104  << 2) + 0xff620000)
#define HEVC_STREAM_RD_PTR                         ((0x3105  << 2) + 0xff620000)
//[31:0] stream_buffer_level - read only
#define HEVC_STREAM_LEVEL                          ((0x3106  << 2) + 0xff620000)
// [31:29] stream_buffer_hole 256*(4^0) bytes
// [28:23] stream_fifo_hole
// [22:16] stream_fifo_level
// [15]    stream_fifo_wr_ptr_update_en
// [14:8]  stream_fifo_wr_ptr
// [7]     stream_fifo_rd_ptr_update_en
// [6:0]   stream_fifo_rd_ptr
#define HEVC_STREAM_FIFO_CTL                       ((0x3107  << 2) + 0xff620000)
// [31:16] - Reserved
// [15]    - disable_shift_clock_gating
// [14]    - disable_start_code_protect
// [10]    - length_zero_startcode_en
// [9]     - length_valid_startcode_en
// [8:6]   - sft_valid_wr_position (default : 3 (at least 24 bits available))
// [5:4]   - emulate_code_length_sub_1(Default : 2)
// [3]     - emulation_auto_on_startcode(Default : 0)
// [2:1]   - start_code_length_sub_1(Default : 2)
// [0]     - stream_shift_enable(Default : 0)
#define HEVC_SHIFT_CONTROL                         ((0x3108  << 2) + 0xff620000)
// [31:0]  - max 4-bytes start code (Default : 0x00000100)
#define HEVC_SHIFT_STARTCODE                       ((0x3109  << 2) + 0xff620000)
// [31:0]  - max 4-bytes emulate code (Default : 0x00000300)
#define HEVC_SHIFT_EMULATECODE                     ((0x310a  << 2) + 0xff620000)
// [2]     - startcode_searching
// [1]     - emulation_check_on
// [0]     - startcode_check_on
#define HEVC_SHIFT_STATUS                          ((0x310b  << 2) + 0xff620000)
// [31:0] hevc_shifted_data - read only
#define HEVC_SHIFTED_DATA                          ((0x310c  << 2) + 0xff620000)
// [31:0] shift_byte_count[31:0]
#define HEVC_SHIFT_BYTE_COUNT                      ((0x310d  << 2) + 0xff620000)
// [31:28] - shift_byte_count[35:32]
// [27:20] - element_read_data[31:24]
// [10]    - bytealign
// [9]     - signed_element
// [8]     - start_element_read
// [7]     - shift_busy
// [6:0]   - shift_bits
#define HEVC_SHIFT_COMMAND                         ((0x310e  << 2) + 0xff620000)
// 31:8    - element_read_data[23:0]
//  7:2    - element_read_length
//  1:0    - element_read_state
#define HEVC_ELEMENT_RESULT                        ((0x310f  << 2) + 0xff620000)
// [31:16] - cabac_buffer
// [15]    - cabac_buffer_init
// [14]    - cabac_context_init
// [13]    - disable_cabac_clock_gating
// [12]    - cabac_init_flag
// [11]    - Reserved
// [10]    - VP9_init_mv
// [9]     - VP9_init_ref_mode
// [8]     - VP9_init_if_y_mode
// [7]     - VP9_init_intra_inter
// [6]     - VP9_init_inter_mode
// [5]     - VP9_init_coef
// [4]     - VP9_init_tx_mode
// [3]     - VP9_init_skip
// [2]     - VP9_init_partition
// [1]     - VP9_key_frame
// [0]     - cabac_enable(Default : 0)
#define HEVC_CABAC_CONTROL                         ((0x3110  << 2) + 0xff620000)
// [31:25] - chromaQPOffset_U
// [24:18] - chromaQPOffset_V
// [17:16] - MaxTrSize 0-4x4, 1-8x8, 2-16x16, 3-32x32
// [15:14] - MinTrSize 0-4x4, 1-8x8, 2-16x16, 3-32x32
// HEVC
// [13:12] - MaxCUSize 0-8x8, 1-16x16, 2-32x32, 3-64x64
// [11:10] - MinCUSize 0-8x8, 1-16x16, 2-32x32, 3-64x64
// [9]     - slice_sao_luma_flag
// [8]     - slice_sao_chroma_flag
// VP9 -- When vp9_enable
// [13:11] - MaxCUSize 0-8x8, 1-16x16, 2-32x32, 3-64x64, 7-4x4
// [10:8]  - MinCUSize 0-8x8, 1-16x16, 2-32x32, 3-64x64, 7-4x4
// [7:2]   - slice_quant
// [1:0]   - slice_type
// AVS2
// [13:12] - MaxCUSize 0-8x8, 1-16x16, 2-32x32, 3-64x64
// [11:10] - MinCUSize 0-8x8, 1-16x16, 2-32x32, 3-64x64
// [9]     - reserved
// [8]     - slice_quant[6]
// [7:2]   - slice_quant
// [1:0]   - slice_type
#define HEVC_PARSER_SLICE_INFO                     ((0x3111  << 2) + 0xff620000)
// bit[16]  - 0:command, 1:address(will auto increase when write command)
// bit[15:0]- command or addr
#define HEVC_PARSER_CMD_WRITE                      ((0x3112  << 2) + 0xff620000)
// [31:16] - reserved
// [15]    - disable_parser_core_clock_gating
// [14:1]  - Reserved
// [0]     - parser_core_enable(Default : 0)
#define HEVC_PARSER_CORE_CONTROL                   ((0x3113  << 2) + 0xff620000)
// [31:16] - pre_parser_cmd
// [15]    - start_cmd_fetch/fetch_busy
// [14]    - parser_cmd_ready
// [13]    - pre_parser_cmd_ready
// [12]    - do_not_wait_if_busy
// [11:8]  - cmd_fetch_status // Read-only
// [7:0]   - cmd_fetch_addr
#define HEVC_PARSER_CMD_FETCH                      ((0x3114  << 2) + 0xff620000)
// [31:16] - parser_cmd
// [9:5]   - parser_function
// [4:0]   - cmd_status
#define HEVC_PARSER_CMD_STATUS                     ((0x3115  << 2) + 0xff620000)
// [31]    - end_of_picture
// [30]    - uiLeft
// [39]    - uiTop
// [28]    - uiTopRight
// [27:24] - Reserved
// [23:12] - uiLin
// [11:0]  - uiCol
#define HEVC_PARSER_LCU_INFO                       ((0x3116  << 2) + 0xff620000)
// 29:28 - min_cu_size_qp_delta
// 27    - cu_qp_delta_enabled_flag
// 26    - amp_enabled_flag
// 25:23 - max_num_merge_cand
// 22    - mvd_l1_zero_flag
// 21:16 - num_ref_idx_l1_active
// 15:10 - num_ref_idx_l0_active
// 9:7   - max_transform_hierarchy_depth_inter
// 6:4   - max_transform_hierarchy_depth_intra
// 3     - transquant_bypass_enable_flag
// 2     - constrained_intra_pred_flag
// 1     - transform_skip_enabled_flag
// 0     - sign_data_hiding_flag
#define HEVC_PARSER_HEADER_INFO                    ((0x3117  << 2) + 0xff620000)
#define HEVC_PARSER_RESULT_0                       ((0x3118  << 2) + 0xff620000)
#define HEVC_PARSER_RESULT_1                       ((0x3119  << 2) + 0xff620000)
#define HEVC_PARSER_RESULT_2                       ((0x311a  << 2) + 0xff620000)
#define HEVC_PARSER_RESULT_3                       ((0x311b  << 2) + 0xff620000)
// For HEVC
// bit[31:24] - quant[47:40]
// bit[23:16] - quant[39:32]
// For VP9
// bit[31:24] - intra_flag
// bit[23:16] - SplitFlag_4
// bit[15:8]  - SkipFlag
// bit[7]     - SliceEnd|end_of_picture
// bit[6:3]   - SplitFlag_8
// bit[2:1]   - SplitFlag_16
// bit[0]     - SplitFlag_32
#define HEVC_CABAC_TOP_INFO                        ((0x311c  << 2) + 0xff620000)
// For HEVC
// bit[31:0]  - quant[31:0]
// For VP9
// bit [31:24] - vp9_top_eob_v
// bit [23:16] - vp9_top_eob_u
// bit [15:0] - vp9_top_eob_y
#define HEVC_CABAC_TOP_INFO_2                      ((0x311d  << 2) + 0xff620000)
// For HEVC
// bit[31:24] - quant[47:40]
// bit[23:16] - quant[39:32]
// For VP9
// bit[31:24] - Reserved
// bit[23:16] - SplitFlag_4
// bit[15:8]  - SkipFlag
// bit[7]     - Reserved
// bit[6:3]   - SplitFlag_8
// bit[2:1]   - SplitFlag_16
// bit[0]     - SplitFlag_32
#define HEVC_CABAC_LEFT_INFO                       ((0x311e  << 2) + 0xff620000)
// For HEVC
// bit[31:0]  - quant[31:0]
// For VP9
// bit [31:24] - vp9_left_eob_v
// bit [23:16] - vp9_left_eob_u
// bit [15:0] - vp9_left_eob_y
#define HEVC_CABAC_LEFT_INFO_2                     ((0x311f  << 2) + 0xff620000)
// [31:29] - stream_buffer_empty_int_ctl (32bytes - 4k bytes) (default : 4 : 512 bytes interrupt)
// [28:26] - stream_fifo_empty_int_ctl (0 - 128)(default : 0 - 0 byte interrupt)
// [25]    - stream_buffer_empty_int_cpu_enable
// [24]    - stream_buffer_empty_int_amrisc_enable
// [23]    - stream_fifo_empty_int_cpu_enable
// [22]    - stream_fifo_empty_int_amrisc_enable
// [15]    - disable_parser_clock_gating
// [8]     - dec_done_int_cpu_enable
// [7]     - dec_done_int_amrisc_enable
// [6]     - cmd_done_int_cpu_enable
// [5]     - cmd_done_int_amrisc_enable
// [4]     - startcode_found_int_cpu_enable
// [3]     - startcode_found_int_amrisc_enable
// [2]     - parser_int_cpu_level (default : 0(pulse))
// [1]     - parser_int_amrisc_level (default : 0(pulse))
// [0]     - parser_int_enable(Default : 0)
#define HEVC_PARSER_INT_CONTROL                    ((0x3120  << 2) + 0xff620000)
// [7]     - stream_empty_int_cpu
// [6]     - stream_empty_int_amrisc
// [2]     - dec_done_int
// [1]     - cmd_done_int
// [0]     - startcode_found_int
#define HEVC_PARSER_INT_STATUS                     ((0x3121  << 2) + 0xff620000)
// [31]    - parser_mpred_if_busy  -- Read Only
// [8]     - sao_sw_pred_enable
// [7]     - sao_top_save_even_no_sao
// [6]     - disable_parser_sao_if_clock_gating
// [5]     - parser_sao_if_en
// [4]     - scaler_if_leave_one_more_space
// [3]     - disable_parser_mpred_if_clock_gating
// [2]     - parser_mpred_if_en
// [1]     - disable_parser_scaler_if_clock_gating
// [0]     - parser_scaler_if_en
#define HEVC_PARSER_IF_CONTROL                     ((0x3122  << 2) + 0xff620000)
// [31:16] PicHeightInLumaSamples
// [15:0]  PicWidthInLumaSamples
#define HEVC_PARSER_PICTURE_SIZE                   ((0x3123  << 2) + 0xff620000)
// [31]    - start_lcu_mpred_cmd
// [30]    - lcu_decoding_start
// [29]    - do_not_wait_if_busy
// [23:0]  - lcu_idx
#define HEVC_PARSER_LCU_START                      ((0x3124  << 2) + 0xff620000)
// [31:30] - bit_depth_chroma_minus8
// [29:24] - MAX_QP
// [23:20] - qpBdOffsetC
// [19:16] - qpBdOffsetY
// [15:12] - pcm_sample_bit_depth_chroma
// [11:8]  - pcm_sample_bit_depth_luma
// [7:6]   - max_pcm_luma_coding_block_size
// [5:4]   - min_pcm_luma_coding_block_size
// [3:2]   - bit_depth_luma_minus8
// [1]     - enable_negtive_quant
// [0]     - pcm_enabled_flag
#define HEVC_PARSER_HEADER_INFO2                   ((0x3125  << 2) + 0xff620000)
// Read Only
// bit[23]    - 1'b1
// bit[22]    - Reserved
// bit[21:16] - quant_V
// bit[15]    - 1'b1
// bit[14]    - Reserved
// bit[13:8]  - quant_U
// bit[7]     - 1'b1
// bit[6]     - Reserved
// bit[5:0]   - quant_Y
#define HEVC_PARSER_QUANT_READ                     ((0x3126  << 2) + 0xff620000)
#define HEVC_PARSER_RESERVED_27                    ((0x3127  << 2) + 0xff620000)
// bit[15:8]  - skip_addr_SaoOffData
// bit[7:0]   - skip_addr_SaoMerge
#define HEVC_PARSER_CMD_SKIP_0                     ((0x3128  << 2) + 0xff620000)
// bit[31:24] - skip_point_coding_unit_slice_type_RET
// bit[23:16] - skip_point_coding_unit_slice_type_B
// bit[15:8]  - skip_point_coding_unit_slice_type_P
// bit[7:0]   - skip_point_coding_unit_slice_type_I
#define HEVC_PARSER_CMD_SKIP_1                     ((0x3129  << 2) + 0xff620000)
// bit[31:24] - reserved
// bit[23:16] - skip_point_coding_unit_pred_mode_RET
// bit[15:8]  - skip_point_coding_unit_pred_mode_INTER
// bit[7:0]   - skip_point_coding_unit_pred_mode_INTRA
#define HEVC_PARSER_CMD_SKIP_2                     ((0x312a  << 2) + 0xff620000)
// Write :
// [24:16] context_addr for dec_Bin
// [15:0]  parser_cmd
// Read result:
// cabac_context_decodeBin,       // 31
// cabac_context_decodeBinEP,     // 30
// cabac_context_decodeBinTrm,    // 29
// cabac_context_decodeBinBit,    // 28
// parser_command,                // 27:22
// cabac_context_ready,           // 21
// cmd_status,                    // 20:16
// cabac_manual_data              // 15:0
//
#define HEVC_PARSER_MANUAL_CMD                     ((0x312b  << 2) + 0xff620000)
// bit [9:0] - Read adress :
//          address 0-255 stream_fifo (128x64)
//          address 256-319 context_mem (256x7)
//          address 320-448 parser_cmd_mem (256x16)
#define HEVC_PARSER_MEM_RD_ADDR                    ((0x312c  << 2) + 0xff620000)
// bit [9:0] - Write adress :
//          address 0-255 stream_fifo (128x64)
//          address 256-319 context_mem (256x7)
//          address 512-640 parser_cmd_mem (256x16)
#define HEVC_PARSER_MEM_WR_ADDR                    ((0x312d  << 2) + 0xff620000)
// bit[31:0] read/write data
#define HEVC_PARSER_MEM_RW_DATA                    ((0x312e  << 2) + 0xff620000)
// [31:20] sao_lcu_x
// [19:8]  sao_lcu_y
// [7] sao_lcu_xy_update
// [6:2] reserved
// [1] sao_wait_up_read
// [0] sao_wait_write
#define HEVC_SAO_IF_STATUS                         ((0x3130  << 2) + 0xff620000)
// Y_offset_3,    // 31:26
// Y_offset_2,    // 25:20
// Y_offset_1,    // 19:14
// Y_offset_0,    // 13:8
// Y_typeAuxInfo[3:0], // 7:4
// Y_typeIdc,     // 3:1 [0, 1, 2, 3]-EO, [4,5]-BO+Y_typeAuxInfo[4]
// Y_modelIdc     // 0
#define HEVC_SAO_IF_DATA_Y                         ((0x3131  << 2) + 0xff620000)
#define HEVC_SAO_IF_DATA_U                         ((0x3132  << 2) + 0xff620000)
#define HEVC_SAO_IF_DATA_V                         ((0x3133  << 2) + 0xff620000)
#define HEVC_STREAM_SWAP_ADDR                      ((0x3134  << 2) + 0xff620000)
// bit[31:24] - swap_wrrsp_count
// bit[23:16] - swap_d_count (Read Only)
// bit[15:8]  - swap_a_count (Read Only) (7:0 or 9:2)
// bit [7] - swap busy (Read Only)
// bit [6:4] - swap_d_count[10:8] (Read Only)
// bit [3] - swap_a_count[10] (Read Only)
// bit [2] - swap_wrrsp_count_update
// bit [1] - 1 - STORE to Memory, 0 - LOAD from Memory
// bit [0] - swap active
#define HEVC_STREAM_SWAP_CTRL                      ((0x3135  << 2) + 0xff620000)
#define HEVC_IQIT_IF_WAIT_CNT                      ((0x3136  << 2) + 0xff620000)
#define HEVC_MPRED_IF_WAIT_CNT                     ((0x3137  << 2) + 0xff620000)
#define HEVC_SAO_IF_WAIT_CNT                       ((0x3138  << 2) + 0xff620000)
// [31:0] packet_length_count
#define HEVC_STREAM_PACKET_LENGTH                  ((0x3139  << 2) + 0xff620000)
// [31]   data_length_protect_enable
// [30]   data_protect_fill_00_enable
// [29]   data_protect_fill_ff_enable
// [28:19] Reserved
// [18:0] data_length_protect_count
#define HEVC_SHIFT_LENGTH_PROTECT                  ((0x313a  << 2) + 0xff620000)
// bit[3:0] parser_debug_idx
#define HEVC_PARSER_DEBUG_IDX                      ((0x313e  << 2) + 0xff620000)
// bit[31:0] parser_debug_dat -- read only
#define HEVC_PARSER_DEBUG_DAT                      ((0x313f  << 2) + 0xff620000)
// bit[22]    - vp9_second_pu_use_if_busy_2
// bit[21]    - parser_mpred_if_busy_when_pu_mpred_busy
// bit[20:9]  - Reserved
// bit[8]   - force_skip_1 (SEG_LVL_SKIP)
// bit[7:3] - vp9_status
// bit[2] - change_vp9_status
// bit[1] - vp9_decode_start(W)/vp9_decode_busy
// bit[0] - vp9_enable
#define VP9_CONTROL                                ((0x3140  << 2) + 0xff620000)
// bit[15:8]- vp9_emd_cmd_parameter
// bit[3]   - vp9_emd_cmd_busy
// bit[2:0] - vp9_emd_command (bit[7]-start/busy)
//            0 - vp9_read
//                   (
//                      input : bit[15:8] - prob,
//                              bit[7:4] - vp9_read_literal_bits(1-16 bits)
//                      output : bit[31:16] - result)
//                   )
//            1 - vp9_diff_update_prob
//                   (
//                      input : bit[7:4] - function:
// `define vp9_read_tx_mode_prob     0
// `define vp9_read_coef_prob        1
// `define vp9_read_skip_prob        2
// `define vp9_read_inter_mode_prob  3
// `define vp9_read_interp_prob      4
// `define vp9_read_intra_inter_prob 5
// `define vp9_read_comp_inter_prob  6
// `define vp9_read_comp_ref_prob    7
// `define vp9_read_single_ref_prob  8
// `define vp9_read_if_y_mode_prob   9
// `define vp9_read_partition_prob  10
// `define vp9_read_mv_prob         11
//                              bit[29:16] - total loop times
//                              bit[31:30] - probs_common
//                      output : bit[15:8] - prob)
//                   )
#define VP9_EMD_CMD                                ((0x3141  << 2) + 0xff620000)
// vp9_top_y_mode[31:0]
#define VP9_TOP_Y_MODE_0                           ((0x3142  << 2) + 0xff620000)
// vp9_top_y_mode[63:32]
#define VP9_TOP_Y_MODE_1                           ((0x3143  << 2) + 0xff620000)
// vp9_left_y_mode[31:0]
#define VP9_LEFT_Y_MODE_0                          ((0x3144  << 2) + 0xff620000)
// vp9_left_y_mode[63:32]
#define VP9_LEFT_Y_MODE_1                          ((0x3145  << 2) + 0xff620000)
// bit[31] - 0:write_vp9_quant, 1:write_vp9_seg_feature
// For write_vp9_seg_feature:
// bit[24:22] - seg_id
// bit[21]    - seg_q_enable
// bit[20]    - seg_q_sign
// bit[19:12] - seg_q_abs
// bit[11]    - seg_lf_enable
// bit[10]    - seg_lf_sign
// bit[9:4]   - seg_lf_abs
// bit[3]     - seg_ref_enable
// bit[2:1]   - seg_ref_abs
// bit[0]     - seg_skip_enable
// For write_vp9_quant:
// bit[19:16] - Write index : Seg_0_Y-0, Seg_0_UV-1, ... Seq_7_Y-14, Seq_7_UV-15
// bit[15:8] - AC quant
// bit[7:0]  - DC quant
#define VP9_QUANT_WR                               ((0x3146  << 2) + 0xff620000)
// bit [31:16] - vp9_inter_mode_top/{8'h0, vp9_seg_pred_top}
// bit [15:0] - vp9_top_tx_mode (odd/even mi has same tx_mode)
#define HEVC_CABAC_TOP_INFO_3                      ((0x3147  << 2) + 0xff620000)
// bit [31:16] - vp9_inter_mode_left/{8'h0, vp9_seg_pred_left}
// bit [15:0] - vp9_left_tx_mode (odd/even mi has same tx_mode)
#define HEVC_CABAC_LEFT_INFO_3                     ((0x3148  << 2) + 0xff620000)
// bit [31:16] - ref_frame[1]
// bit [15:0]  - ref_frame[0]
#define HEVC_CABAC_TOP_INFO_4                      ((0x3149  << 2) + 0xff620000)
// bit [31:16] - ref_frame[1]
// bit [15:0]  - ref_frame[0]
#define HEVC_CABAC_LEFT_INFO_4                     ((0x314a  << 2) + 0xff620000)
// bit [31:16]  - interp_filter
// bit [15:8]   - Reserved
// bit [7:0]    - vp9_seg_pred_top
#define HEVC_CABAC_TOP_INFO_5                      ((0x314b  << 2) + 0xff620000)
// bit [31:16]  - interp_filter
// bit [15:8]   - Reserved
// bit [7:0]    - vp9_seg_pred_left
#define HEVC_CABAC_LEFT_INFO_5                     ((0x314c  << 2) + 0xff620000)
// bit[31]    - operation start (read : busy)
// bit[30:28] - operation_endian
// bit[27:24] - Reserved
// bit[23:22] - operation_mem 00:prob_mem, 01:count_mem
// bit[21:20] - operation_cmd 0:clear, 1-store, 2-load
// bit[19:10] - operation_end_addr
// bit[9:0] - operation_start_addr
#define VP9_MEM_OPERATION                          ((0x314d  << 2) + 0xff620000)
// bit[27]    - vp9_seg_pred_info_3
// bit[26]    - vp9_seg_abs_delta
// bit[25]    - vp9_seg_temporal
// bit[24]    - vp9_seg_update_map
// bit[23]    - vp9_seg_enable
// bit[22]    - vp9_lossless_use_set
// bit[21]    - vp9_lossless_set_data
// bit[20]    - vp9_swap_Y_MODE_with_INFO45
// bit[19]    - vp9_allow_hp
// bit[18:16] - vp9_interp_filter
// bit[15]    - vp9_intra_frame
// bit[14:12] - vp9_tx_mode
// bit[11:10] - vp9_ref_mode // SINGLE_REFERENCE(0), COMPOUND_REFERENCE(1), REFERENCE_MODE_SELECT(2)
// bit[9]   - VPX_BITS_10
// bit[8] - ref_frame_bias[2]
// bit[7] - ref_frame_bias[1]
// bit[6] - ref_frame_bias[0]
// [5:4] - comp_var_ref[1]
// [3:2] - comp_var_ref[0]
// [1:0] - comp_fixed_ref
#define VP9_DECODING_INFO                          ((0x314f  << 2) + 0xff620000)
// [7]   -- segment_id_map_from_shadow
// [6]   -- segment_id_map_to_shadow
// [5]   -- shadow_rw_addr_update
// [4:0] -- shadiw_rw_addr
#define VP9_SHADOW_CTRL                            ((0x3150  << 2) + 0xff620000)
// [31:0] -- shadow_rw_data
#define VP9_SHADOW_DATA                            ((0x3151  << 2) + 0xff620000)
// bit[22]    - avs2_second_pu_use_if_busy_2
// bit[21]    - parser_mpred_if_busy_when_pu_mpred_busy
// bit[20:9]  - Reserved
// bit[8]   - force_skip_1 (SEG_LVL_SKIP)
// bit[7:3] - avs2_status
// bit[2] - change_avs2_status
// bit[1] - avs2_decode_start(W)/avs2_decode_busy
// bit[0] - avs2_enable
#define AVS2_CONTROL                               ((0x3152  << 2) + 0xff620000)
// bit[7] - useNSIP (nonsquare_intra_prediction_enable)
// bit[6] - secT_enabled (secondary_transform_enable_flag)
// bit[5] - slice_alf_enable_Y
// bit[4] - slice_alf_enable_U
// bit[3] - slice_alf_enable_V
// bit[2] - slice_sao_enable_Y
// bit[1] - slice_sao_enable_U
// bit[0] - slice_sao_enable_V
#define AVS2_DEC_INFO                              ((0x3153  << 2) + 0xff620000)
//
// Closing file:  hevc_parser_regs.h
//
//------------------------------------------------------------------------------
// HEVC_MPRED module level register offset
//------------------------------------------------------------------------------
//
// Reading file:  hevc_mpred_regs.h
//
// -----------------------------------------------
// CBUS_BASE:  DOS_HEVC_MPRED_CBUS_BASE = 0x02
// -----------------------------------------------
#define HEVC_MPRED_VERSION                         ((0x3200  << 2) + 0xff620000)
//  [31:0]  reversion               default:32'h00010001
#define HEVC_MPRED_CTRL0                           ((0x3201  << 2) + 0xff620000)
// [1:0]    slice_type[1:0]
// [2]      new_pic
// [3]      new_tile
// [4]      SliceSegment
// [5]      TMVPFlag_en
// [6]      LDCFlag
// [7]      ColFromL0Flag
// [8]      reserved
// [9]      above_en
// [10]     mv_wr_en  :collocated MV write enable: 0=no-write,1=write;default:1'b1
// [11]     mv_rd_en
// [12]     col_isIntra
// [13]     reserved
// [14]     LongTerm_Curr
// [15]     LongTerm_Col
// [19:16]  lcu_size_log2[3:0]
// [23:20]  cu_size_log2[3:0]
// [26:24]  plevel[2:0]
// [31:27]  reserved
#define HEVC_MPRED_CTRL1                           ((0x3202  << 2) + 0xff620000)
//  [3:0]   MERGE_MAX_NUM_CANDS[3:0]
//  [7:4]   AMVP_MAX_NUM_CANDS[3:0]
//  [23:8]  reserved
//  [24]    clk_forceon
//  [31:25] reserved
#define HEVC_MPRED_INT_EN                          ((0x3203  << 2) + 0xff620000)
//  [0]     mpred_int_enable
//  [1]     mpred_int_amrisc_level
//  [2]     mpred_int_cpu_level
//  [3]     slice_done_int_amrisc_enable
//  [4]     slice_done_int_cpu_enable
//  [15]    disable_mpred_int_clock_gating
#define HEVC_MPRED_INT_STATUS                      ((0x3204  << 2) + 0xff620000)
//  [0]     slice_done IRQ
//  [31]    write "1"=slice start(self clear,read always return "0")
#define HEVC_MPRED_PIC_SIZE                        ((0x3205  << 2) + 0xff620000)
//  [15:0]  pic_width[15:0]
//  [31:16] pic_height[15:0]
#define HEVC_MPRED_PIC_SIZE_LCU                    ((0x3206  << 2) + 0xff620000)
//  [15:0]  lcu_x_num_1[15:0]   (=lcu_x_total-1)
//  [31:16] lcu_y_num_1[15:0]   (=lcu_y_total-1)
#define HEVC_MPRED_TILE_START                      ((0x3207  << 2) + 0xff620000)
//  [15:0]  tile_start_lcu_x[15:0]
//  [31:16] tile_start_lcu_y[15:0]
#define HEVC_MPRED_TILE_SIZE_LCU                   ((0x3208  << 2) + 0xff620000)
//  [15:0]  tile_width_lcu[15:0]
//  [31:16] tile_height_lcu[15:0]
#define HEVC_MPRED_REF_NUM                         ((0x3209  << 2) + 0xff620000)
//  [3:0]   refNum_L0[3:0]
//  [11:8]  refNum_L1[3:0]
//  [19:16] col_refNum_L0[3:0]
//  [27:24] col_refNum_L1[3:0]
#define HEVC_MPRED_LT_REF                          ((0x320a  << 2) + 0xff620000)
//  [00]    LongTerm_L0_Ref00
//  [01]    LongTerm_L0_Ref01
//  ......
//  [15]    LongTerm_L0_Ref15
//  [16]    LongTerm_L1_Ref00
//  [17]    LongTerm_L1_Ref01
//  ......
//  [31]    LongTerm_L1_Ref15
#define HEVC_MPRED_LT_COLREF                       ((0x320b  << 2) + 0xff620000)
//  [00]    LongTerm_Col_L0_Ref00
//  [01]    LongTerm_Col_L0_Ref01
//  ......
//  [15]    LongTerm_Col_L0_Ref15
//  [16]    LongTerm_Col_L1_Ref00
//  [17]    LongTerm_Col_L1_Ref01
//  ......
//  [31]    LongTerm_Col_L1_Ref15
#define HEVC_MPRED_REF_EN_L0                       ((0x320c  << 2) + 0xff620000)
//  [00]    L0_ref00_en
//  [01]    L0_ref01_en
//  ......
//  [15]    L0_ref15_en
#define HEVC_MPRED_REF_EN_L1                       ((0x320d  << 2) + 0xff620000)
//  [00]    L1_ref00_en
//  [01]    L1_ref01_en
//  ......
//  [15]    L1_ref15_en
#define HEVC_MPRED_COLREF_EN_L0                    ((0x320e  << 2) + 0xff620000)
//  [00]    COL_L0_ref00_en
//  [01]    COL_L0_ref01_en
//  ......
//  [15]    COL_L0_ref15_en
#define HEVC_MPRED_COLREF_EN_L1                    ((0x320f  << 2) + 0xff620000)
//  [00]    COL_L1_ref00_en
//  [01]    COL_L1_ref01_en
//  ......
//  [15]    COL_L1_ref15_en
#define HEVC_MPRED_AXI_WCTRL                       ((0x3210  << 2) + 0xff620000)
//  [11:8]  aw_id_set[3:0]
#define HEVC_MPRED_AXI_RCTRL                       ((0x3211  << 2) + 0xff620000)
//  [11:8]  ar_id_set[3:0]
#define HEVC_MPRED_ABV_START_ADDR                  ((0x3212  << 2) + 0xff620000)
#define HEVC_MPRED_MV_WR_START_ADDR                ((0x3213  << 2) + 0xff620000)
#define HEVC_MPRED_MV_RD_START_ADDR                ((0x3214  << 2) + 0xff620000)
#define HEVC_MPRED_MV_WPTR                         ((0x3215  << 2) + 0xff620000)
#define HEVC_MPRED_MV_RPTR                         ((0x3216  << 2) + 0xff620000)
#define HEVC_MPRED_MV_WR_ROW_JUMP                  ((0x3217  << 2) + 0xff620000)
#define HEVC_MPRED_MV_RD_ROW_JUMP                  ((0x3218  << 2) + 0xff620000)
#define HEVC_MPRED_CURR_LCU                        ((0x3219  << 2) + 0xff620000)
#define HEVC_MPRED_ABV_WPTR                        ((0x321a  << 2) + 0xff620000)
#define HEVC_MPRED_ABV_RPTR                        ((0x321b  << 2) + 0xff620000)
#define HEVC_MPRED_CTRL2                           ((0x321c  << 2) + 0xff620000)
#define HEVC_MPRED_CTRL3                           ((0x321d  << 2) + 0xff620000)
#define HEVC_MPRED_MV_WLCUY                        ((0x321e  << 2) + 0xff620000)
#define HEVC_MPRED_MV_RLCUY                        ((0x321f  << 2) + 0xff620000)
#define HEVC_MPRED_L0_REF00_POC                    ((0x3220  << 2) + 0xff620000)
#define HEVC_MPRED_L0_REF01_POC                    ((0x3221  << 2) + 0xff620000)
#define HEVC_MPRED_L0_REF02_POC                    ((0x3222  << 2) + 0xff620000)
#define HEVC_MPRED_L0_REF03_POC                    ((0x3223  << 2) + 0xff620000)
#define HEVC_MPRED_L0_REF04_POC                    ((0x3224  << 2) + 0xff620000)
#define HEVC_MPRED_L0_REF05_POC                    ((0x3225  << 2) + 0xff620000)
#define HEVC_MPRED_L0_REF06_POC                    ((0x3226  << 2) + 0xff620000)
#define HEVC_MPRED_L0_REF07_POC                    ((0x3227  << 2) + 0xff620000)
#define HEVC_MPRED_L0_REF08_POC                    ((0x3228  << 2) + 0xff620000)
#define HEVC_MPRED_L0_REF09_POC                    ((0x3229  << 2) + 0xff620000)
#define HEVC_MPRED_L0_REF10_POC                    ((0x322a  << 2) + 0xff620000)
#define HEVC_MPRED_L0_REF11_POC                    ((0x322b  << 2) + 0xff620000)
#define HEVC_MPRED_L0_REF12_POC                    ((0x322c  << 2) + 0xff620000)
#define HEVC_MPRED_L0_REF13_POC                    ((0x322d  << 2) + 0xff620000)
#define HEVC_MPRED_L0_REF14_POC                    ((0x322e  << 2) + 0xff620000)
#define HEVC_MPRED_L0_REF15_POC                    ((0x322f  << 2) + 0xff620000)
#define HEVC_MPRED_L1_REF00_POC                    ((0x3230  << 2) + 0xff620000)
#define HEVC_MPRED_L1_REF01_POC                    ((0x3231  << 2) + 0xff620000)
#define HEVC_MPRED_L1_REF02_POC                    ((0x3232  << 2) + 0xff620000)
#define HEVC_MPRED_L1_REF03_POC                    ((0x3233  << 2) + 0xff620000)
#define HEVC_MPRED_L1_REF04_POC                    ((0x3234  << 2) + 0xff620000)
#define HEVC_MPRED_L1_REF05_POC                    ((0x3235  << 2) + 0xff620000)
#define HEVC_MPRED_L1_REF06_POC                    ((0x3236  << 2) + 0xff620000)
#define HEVC_MPRED_L1_REF07_POC                    ((0x3237  << 2) + 0xff620000)
#define HEVC_MPRED_L1_REF08_POC                    ((0x3238  << 2) + 0xff620000)
#define HEVC_MPRED_L1_REF09_POC                    ((0x3239  << 2) + 0xff620000)
#define HEVC_MPRED_L1_REF10_POC                    ((0x323a  << 2) + 0xff620000)
#define HEVC_MPRED_L1_REF11_POC                    ((0x323b  << 2) + 0xff620000)
#define HEVC_MPRED_L1_REF12_POC                    ((0x323c  << 2) + 0xff620000)
#define HEVC_MPRED_L1_REF13_POC                    ((0x323d  << 2) + 0xff620000)
#define HEVC_MPRED_L1_REF14_POC                    ((0x323e  << 2) + 0xff620000)
#define HEVC_MPRED_L1_REF15_POC                    ((0x323f  << 2) + 0xff620000)
#define HEVC_MPRED_PIC_SIZE_EXT                    ((0x3240  << 2) + 0xff620000)
#define HEVC_MPRED_DBG_MODE0                       ((0x3241  << 2) + 0xff620000)
#define HEVC_MPRED_DBG_MODE1                       ((0x3242  << 2) + 0xff620000)
#define HEVC_MPRED_DBG2_MODE                       ((0x3243  << 2) + 0xff620000)
#define HEVC_MPRED_IMP_CMD0                        ((0x3244  << 2) + 0xff620000)
#define HEVC_MPRED_IMP_CMD1                        ((0x3245  << 2) + 0xff620000)
#define HEVC_MPRED_IMP_CMD2                        ((0x3246  << 2) + 0xff620000)
#define HEVC_MPRED_IMP_CMD3                        ((0x3247  << 2) + 0xff620000)
#define HEVC_MPRED_DBG2_DATA_0                     ((0x3248  << 2) + 0xff620000)
#define HEVC_MPRED_DBG2_DATA_1                     ((0x3249  << 2) + 0xff620000)
#define HEVC_MPRED_DBG2_DATA_2                     ((0x324a  << 2) + 0xff620000)
#define HEVC_MPRED_DBG2_DATA_3                     ((0x324b  << 2) + 0xff620000)
#define HEVC_MPRED_CTRL4                           ((0x324c  << 2) + 0xff620000)
//  [0]     above intermedia data compress: 0=no-compress,1=compress;default:1'b0
//  [1]     collocated MV intermedia data compress: 0=no-compress,1=compress;default:1'b0
//  [2]     vp9_mode,0=hevc_mode,1=vp9_mode,default=0
//  [6]     vp9_use_prev_frame_mvs  0=not allow vp9_use_prev_frame_mvs,1=allow vp9_use_prev_frame_mvs,default=0
//  [8]     vp9_not_allow_hp    0=vp9_allow_hp,1=vp9_not_allow_hp,default=0
//  [9]     vp9_is_compound     0=vp9_is_not_compound,1=vp9_is_compound,default=0
//  [12]    vp9_ref_sign_bias[1]        ref1(last) ref_sign_bias, default=0
//  [13]    vp9_ref_sign_bias[2]        ref2(golden) ref_sign_bias,default=0
//  [14]    vp9_ref_sign_bias[3]        ref3(altref) ref_sign_bias,default=0
#define HEVC_MPRED_CTRL5                           ((0x324d  << 2) + 0xff620000)
#define HEVC_MPRED_POC24_CTRL0                     ((0x324e  << 2) + 0xff620000)
#define HEVC_MPRED_POC24_CTRL1                     ((0x324f  << 2) + 0xff620000)
#define HEVC_MPRED_DBG_DATA_0                      ((0x3250  << 2) + 0xff620000)
#define HEVC_MPRED_DBG_DATA_1                      ((0x3251  << 2) + 0xff620000)
#define HEVC_MPRED_DBG_DATA_2                      ((0x3252  << 2) + 0xff620000)
#define HEVC_MPRED_DBG_DATA_3                      ((0x3253  << 2) + 0xff620000)
#define HEVC_MPRED_DBG_DATA_4                      ((0x3254  << 2) + 0xff620000)
#define HEVC_MPRED_DBG_DATA_5                      ((0x3255  << 2) + 0xff620000)
#define HEVC_MPRED_DBG_DATA_6                      ((0x3256  << 2) + 0xff620000)
#define HEVC_MPRED_DBG_DATA_7                      ((0x3257  << 2) + 0xff620000)
#define HEVC_MPRED_CTRL6                           ((0x3258  << 2) + 0xff620000)
#define HEVC_MPRED_CTRL7                           ((0x3259  << 2) + 0xff620000)
#define HEVC_MPRED_CTRL8                           ((0x325a  << 2) + 0xff620000)
#define HEVC_MPRED_CTRL9                           ((0x325b  << 2) + 0xff620000)
#define HEVC_MPRED_CUR_POC                         ((0x3260  << 2) + 0xff620000)
#define HEVC_MPRED_COL_POC                         ((0x3261  << 2) + 0xff620000)
#define HEVC_MPRED_MV_RD_END_ADDR                  ((0x3262  << 2) + 0xff620000)
//
// Closing file:  hevc_mpred_regs.h
//
//------------------------------------------------------------------------------
// HEVC_IPP module level register offset
//------------------------------------------------------------------------------
//
// Reading file:  hevc_ipp_regs.h
//
// John A. Thodiyil
// Register map for intra/inter/pcm pixel-prediction + MCRCC + DECOMP
// August 14th, 2013
// -----------------------------------------------
// CBUS_BASE:  DOS_HEVC_IPP_CBUS_BASE = 0x04
// -----------------------------------------------
#define HEVCD_IPP_TOP_CNTL                         ((0x3400  << 2) + 0xff620000)
// [0]      -- software reset ipp and mpp
// [1]      -- enable ipp
// [3:2]    -- reserved
// [5:4]    -- codec[1:0] 00:hevc 01:vp9 10:avs2 11:reserved
// [31:6]   -- reserved
#define HEVCD_IPP_TOP_STATUS                       ((0x3401  << 2) + 0xff620000)
// [0]      -- ready for next tile/frame
// [1]      -- ready for next ctb
// [2]      -- ready for next slice
// [3]      -- reserved
// [4]      -- ipp_axi_rd_idle
// [5]      -- ipp_axi_wr_idle
// [6]      -- mpp_axi_rd_idle
// [31:7]   -- reserved
#define HEVCD_IPP_TOP_FRMCONFIG                    ((0x3402  << 2) + 0xff620000)
// [14:0]   -- frame width in luma pixels
// [30:16]  -- frame height in luma pixels
#define HEVCD_IPP_TOP_TILECONFIG1                  ((0x3403  << 2) + 0xff620000)
// [11:0]   -- tile_width_in_lcu
// [27:16]  -- tile_height_in_lcu
#define HEVCD_IPP_TOP_TILECONFIG2                  ((0x3404  << 2) + 0xff620000)
// [11:0]   -- tile_offset_x_in_lcu
// [27:16]  -- tile_offset_y_in_lcu
#define HEVCD_IPP_TOP_TILECONFIG3                  ((0x3405  << 2) + 0xff620000)
// [0]      -- tiles_enabled_flag
// [31:1]   -- reserved
#define HEVCD_IPP_TOP_LCUCONFIG                    ((0x3406  << 2) + 0xff620000)
// [6:0]    -- lcu size in pixels
#define HEVCD_IPP_TOP_FRMCTL                       ((0x3407  << 2) + 0xff620000)
// [x]      -- start ipp tile decode
#define HEVCD_IPP_CONFIG                           ((0x3408  << 2) + 0xff620000)
// [0]      -- ipp_strong_intra_smoothing_enable_flag
// [1]      -- cfg_ipp_constrained_intra_pred_flag
// [31:2]   -- reserved
#define HEVCD_IPP_LINEBUFF_BASE                    ((0x3409  << 2) + 0xff620000)
// [31:14]  -- intra-prediction line-buffer 16KByte axi address
// [13:0]   -- reserved
#define HEVCD_IPP_INTR_MASK                        ((0x340a  << 2) + 0xff620000)
// [0]      -- tile/frame ready
// [1]      -- ctb ready
// [2]      -- slice ready
// [31:3]   -- reserved
#define HEVCD_IPP_AXIIF_CONFIG                     ((0x340b  << 2) + 0xff620000)
// [3:0]    -- little_endian
// [5:4]    -- address_format 00:linear 01:32x32 10:64x32
// [7:6]    -- reserved
// [9:8]    -- Linear_LineAlignment 00:16byte 01:32byte 10:64byte
// [11:10]  -- reserved
// [12]     -- CbCr_byte_swap
// [31:13]  -- reserved
#define HEVCD_IPP_BITDEPTH_CONFIG                  ((0x340c  << 2) + 0xff620000)
// [1:0]    -- bit_depth_luma   00:8 01:9 10:10
// [3:2]    -- bit_depth_chroma 00:8 01:9 10:10
// [31:4]   -- reserved
#define HEVCD_IPP_SWMPREDIF_CONFIG                 ((0x3410  << 2) + 0xff620000)
// [0]      -- swmpredif_enable
// [31:1]   -- reserved
#define HEVCD_IPP_SWMPREDIF_STATUS                 ((0x3411  << 2) + 0xff620000)
// [0]      -- swmpredif_rdy
// [7:1]    -- reserved
// [14:8]   -- swmpredif_fifospace
// [31:15]  -- reserved
#define HEVCD_IPP_SWMPREDIF_CTBINFO                ((0x3412  << 2) + 0xff620000)
// [10:0]   -- swmpredif_ctb_x
// [15:11]  -- reserved
// [26:16]  -- swmpredif_ctb_y
// [30:27]  -- reserved
// [31]     -- swmpredif_newslice
#define HEVCD_IPP_SWMPREDIF_PUINFO0                ((0x3413  << 2) + 0xff620000)
// [31:0]   -- swmpredif_imp_cmd[31:0]
#define HEVCD_IPP_SWMPREDIF_PUINFO1                ((0x3414  << 2) + 0xff620000)
// [31:0]   -- swmpredif_imp_cmd[63:32]
#define HEVCD_IPP_SWMPREDIF_PUINFO2                ((0x3415  << 2) + 0xff620000)
// [31:0]   -- swmpredif_imp_cmd[95:64]
#define HEVCD_IPP_SWMPREDIF_PUINFO3                ((0x3416  << 2) + 0xff620000)
// [31:0]   -- swmpredif_imp_cmd[127:96]
#define HEVCD_IPP_SWMPREDIF_PUINFO4                ((0x3417  << 2) + 0xff620000)
// [31:0]   -- swmpredif_imp_cmd[159:128]
#define HEVCD_IPP_SWMPREDIF_PUINFO5                ((0x3418  << 2) + 0xff620000)
// [31:0]   -- swmpredif_imp_cmd[191:160]
//          writing to HEVCD_IPP_SWMPREDIF_PUINFO5
//          completes command, should be last to write.
#define HEVCD_IPP_DYNCLKGATE_CONFIG                ((0x3420  << 2) + 0xff620000)
// [0]      -- mpp_wpredict_clkgate_disbl
// [1]      -- mpp_ref_fetch_clkgate_disbl
// [2]      -- mpp_interpol_top_clkgate_disbl
// [3]      -- mpp_4x4mcr_clkgate_disbl
// [4]      -- mpp_ref_pack_clkgate_disbl
// [5]      -- mpp_mdec_if_clkgate_disbl
// [7:6]    -- reserved
// [8]      -- ipp_res_fetch_clkgate_disbl
// [9]      -- ipp_iqitIf_clkgate_disbl
// [10]     -- ipp_dblkCmdIf_clkgate_disbl
// [11]     -- ipp_dblkIf_clkgate_disbl
// [12]     -- ipp_cntl_clkgate_disbl
// [13]     -- ipp_nsamples_proc_clkgate_disbl
// [14]     -- ipp_refroute_clkgate_disbl
// [15]     -- ipp_spred_clkgate_disbl
// [16]     -- ipp_reg_clkgate_disbl
// [17]     -- ipp_recon_clkgate_disbl
// [19:18]  -- reserved
// [20]     -- decomp_cntl_clkgate_disbl
// [21]     -- decomp_axiIf_clkgate_disbl
// [22]     -- decomp_dcache_clkgate_disbl
// [23]     -- decomp_hcache_clkgate_disbl
// [24]     -- decomp_gearup_clkgate_disbl
// [25]     -- decomp_cores_clkgate_disbl
// [26]     -- decomp_rdroute_clkgate_disbl
// [27]     -- reserved
// [28]     -- master_decomp_clkgate_disbl
// [29]     -- master_mpp_clkgate_disbl
// [30]     -- master_ipp_clkgate_disbl
// [31]     -- master_ipp_mpp_decomp_clkgate_disbl
#define HEVCD_IPP_DYNCLKGATE_STATUS                ((0x3421  << 2) + 0xff620000)
// [0]      -- mpp_wpredict_clkgate
// [1]      -- mpp_ref_fetch_clkgate
// [2]      -- mpp_interpol_top_clkgate
// [3]      -- mpp_4x4mcr_clkgate
// [4]      -- mpp_ref_pack_clkgate
// [5]      -- mpp_mdec_if_clkgate
// [7:6]    -- reserved
// [8]      -- ipp_res_fetch_clkgate
// [9]      -- ipp_iqitIf_clkgate
// [10]     -- ipp_dblkCmdIf_clkgate
// [11]     -- ipp_dblkIf_clkgate
// [12]     -- ipp_cntl_clkgate
// [13]     -- ipp_nsamples_proc_clkgate
// [14]     -- ipp_refroute_clkgate
// [15]     -- ipp_spred_clkgate
// [16]     -- ipp_reg_clkgate
// [17]     -- ipp_recon_clkgate
// [19:18]  -- reserved
// [20]     -- decomp_cntl_clkgate
// [21]     -- decomp_axiIf_clkgate
// [22]     -- decomp_dcache_clkgate
// [23]     -- decomp_hcache_clkgate
// [24]     -- decomp_gearup_clkgate
// [25]     -- decomp_cores_clkgate
// [26]     -- decomp_rdroute_clkgate
// [27]     -- reserved
// [30:28]  -- reserved
// [31]     -- mcrcc_axi_clkgate
#define HEVCD_IPP_DBG_SEL                          ((0x3430  << 2) + 0xff620000)
// [3:0]    -- module_level_sel
// [7:4]    -- mpp_ipp_top_level
// [8]      -- ipp_sel
// [31:9]   -- reserved
#define HEVCD_IPP_DBG_DATA                         ((0x3431  << 2) + 0xff620000)
// [31:0]   -- Debug information
//////////////////////////////////////////////////////////////////////////////
///// MPP Registers                                       ////////////////////
//////////////////////////////////////////////////////////////////////////////
// Canvas Anchor to Axi-Address translation table
#define HEVCD_MPP_ANC2AXI_TBL_CONF_ADDR            ((0x3460  << 2) + 0xff620000)
// [0]      -- anc2axi canvas address translation table switch 0:sw 1:hw
// [1]      -- access type 1:wr 0:rd
// [2]      -- auto index increment
// [7:3]    -- reserved
// [15:8]   -- start index
// [31:16]  -- reserved
//`define     HEVCD_MPP_ANC2AXI_TBL_CMD_ADDR         8'h61
// [0]      -- anc2axi canvas address translation table access type 1:wr 0:rd
// [15:8]   -- anc2axi canvas address translation table access index
// [31:16]  -- anc2axi canvas address translation table access write data, 16KByte axi address
//          -- obsoleted
//`define     HEVCD_MPP_ANC2AXI_TBL_WDATA_ADDR       8'h62   // NU
// [x]      -- not used
//`define     HEVCD_MPP_ANC2AXI_TBL_RDATA_ADDR       8'h63
// [15:0]   -- anc2axi canvas address translation table access read data
//          -- obsoleted
#define HEVCD_MPP_ANC2AXI_TBL_DATA                 ((0x3464  << 2) + 0xff620000)
// [26:0]   -- anc2axi address r/w  32byte aligned
// [31:27]  -- reserved
#define HEVCD_MPP_WEIGHTPRED_CNTL_ADDR             ((0x347b  << 2) + 0xff620000)
// [0]      -- weighted_pred_flag
#define HEVCD_MPP_L0_WEIGHT_FLAG_ADDR              ((0x347c  << 2) + 0xff620000)
// [15:0]   -- luma_weght_flag0[15:0], indexed by refidx0
// [31:16]  -- chroma_weght_flag0[15:0], indexed by refidx0
#define HEVCD_MPP_L1_WEIGHT_FLAG_ADDR              ((0x347d  << 2) + 0xff620000)
// [15:0]   -- luma_weght_flag1[15:0], indexed by refidx1
// [31:16]  -- chroma_weght_flag1[15:0], indexed by refidx1
#define HEVCD_MPP_YLOG2WGHTDENOM_ADDR              ((0x347e  << 2) + 0xff620000)
// [3:0]    -- luma_log2_weight_denom
#define HEVCD_MPP_DELTACLOG2WGHTDENOM_ADDR         ((0x347f  << 2) + 0xff620000)
// [4:0]    -- delta_chroma_log2_weight_denom
#define HEVCD_MPP_WEIGHT_ADDR                      ((0x3480  << 2) + 0xff620000)
// [5:0]    -- weight_rw_addr
// [0]      -- DELTA_WEIGHT0
// [1]      -- OFFSET0
// [2]      -- DELTA_WEIGHT1
// [3]      -- OFFSET1
// ......
// [62]     -- DELTA_WEIGHT31
// [63]     -- OFFSET31
#define HEVCD_MPP_WEIGHT_DATA                      ((0x3481  << 2) + 0xff620000)
// For DELTA_WEIGHT :
// [7:0]    -- delta_y_weight for refidx0:0
// [15:8]   -- delta_cb_weight for refidx0:0
// [23:16]  -- delta_cr_weight for refidx0:0
// For OFFSET :
// [7:0]    -- luma_offset for refidx0:0
// [17:8]   -- delta_cb_offset for refidx0:0
// [27:18]  -- delta_cr_offset for refidx0:0
// ID to Anchor-Canvas-Address table
// [31:13]  reserved
// [12:8]   access_index
// [7:2]    reserved
// [1]      auto_inc_read
// [0]      auto_inc_write
#define HEVCD_MPP_ANC_CANVAS_ACCCONFIG_ADDR        ((0x34c0  << 2) + 0xff620000)
// Id[4:0]  --> {AnchorAddrCr[7:0],AnchorAddrCb[7:0],AnchorAddrY[7:0]}
#define HEVCD_MPP_ANC_CANVAS_DATA_ADDR             ((0x34c1  << 2) + 0xff620000)
// [0]       -- decomp_nocompress
// [1]       -- decomp_dcache_bypass
// [2]       -- reserved
// [3]       -- decomp_smem_bdepth888
// [4]       -- decomp_paged_mem_mode
// [30:5]    -- reserved
// [31]      -- decomp_axif_lbmode888
#define HEVCD_MPP_DECOMP_CTL1                      ((0x34c2  << 2) + 0xff620000)
// [23:0]    -- header1_offset : 32byte address from canvas base
// [31:24]   -- reserved
#define HEVCD_MPP_DECOMP_CTL2                      ((0x34c3  << 2) + 0xff620000)
// [9:0]     -- decomp_default_Y
// [19:10]   -- decomp_default_Cb
// [29:20]   -- decomp_dafault_Cr
// [31:30]   -- bitdepth_sel 00:8bit 01:9bit 10:10bit
#define HEVCD_MPP_DECOMP_CTL3                      ((0x34c4  << 2) + 0xff620000)
// HEVCD_MPP_DECOMP_PERFMON_CTL
// [0]      percount_reset
// [3:1]    perfcount_sel
// [31:4]   reserved
// {1'b0,perfcount_sel[1:0]}    perfcount
//     0                        raw_hcache_cnt
//     1                        hit_hcache_cnt
//     2                        raw_dcache_cnt
//     3                        hit_dcache_cnt
// {1'b1,perfcount_sel[1:0]}    perfcount
//     0                        fast_num_compburst
//     1                        slow_num_compburst
//     2,3                      raw_num_ncompburst
#define HEVCD_MPP_DECOMP_PERFMON_CTL               ((0x34c5  << 2) + 0xff620000)
// HEVCD_MPP_DECOMP_PERFMON_DATA
// [31:0]   percount_data
#define HEVCD_MPP_DECOMP_PERFMON_DATA              ((0x34c6  << 2) + 0xff620000)
// HEVCD_MPP_DECOMP_AXIURG_CTL
// [1:0]      -- decomp_hdrurg  00:Normal 01:Urgent 10:SuperUrgent
// [2]        -- decomp_fpathurg_en 1->Urgent if below lo_thresh
// [3]        -- decomp_spathurg_en 1->Urgent if below lo_thresh
// [10:4]     -- decomp_fpathurg_lothresh [32byte steps : max 96]
// [17:11]    -- decomp_fpathurg_hithresh [32byte steps : max 96]
// [24:18]    -- decomp_spathurg_lothresh [32byte steps : max 64]
// [31:25]    -- decomp_spathurg_hithresh [32byte steps : max 64]
#define HEVCD_MPP_DECOMP_AXIURG_CTL                ((0x34c7  << 2) + 0xff620000)
// HEVCD_MPP_VDEC_MCR_CTL
// [0]        -- mcr_mdec_mode : 1:mcr fetch used by vdec:mdec
// [3:1]      -- reserved
// [4]        -- mcr_mdec_8byte_endianess : 1:big 0:little
// [31:5]     -- reserved
#define HEVCD_MPP_VDEC_MCR_CTL                     ((0x34c8  << 2) + 0xff620000)
//////////////////////////////////////////////////////////////////////////////
///// MCRCC_AXI Registers                                 ////////////////////
//////////////////////////////////////////////////////////////////////////////
// HEVCD_MCRCC_CTL1
// 31:12 <reserved[20:0]>
// 11:10 <cfg_anc11_tb>                           // 01: top 10:bot 11:frame
// 9:8   <cfg_anc10_tb>
// 7:6   <cfg_anc01_tb>
// 5:4   <cfg_anc00_tb>
// 3     <cfg_clkgate_disbl>
// 2     <cfg_field_pic>                           // not used for hevc
// 1     <sw_rst>
// 0     <bypass_en>
#define HEVCD_MCRCC_CTL1                           ((0x34f0  << 2) + 0xff620000)
// HEVCD_MCRCC_CTL2
// 31:24    <cfg_cache_anc01_c[7:0]>
// 23:16    <cfg_cache_anc01_y[7:0]>
// 15:8     <cfg_cache_anc00_c[7:0]>
// 7:0      <cfg_cache_anc00_y[7:0]>
#define HEVCD_MCRCC_CTL2                           ((0x34f1  << 2) + 0xff620000)
// HEVCD_MCRCC_CTL3
// 31:24    <cfg_cache_anc11_c[7:0]>
// 23:16    <cfg_cache_anc11_y[7:0]>
// 15:8     <cfg_cache_anc10_c[7:0]>
// 7:0      <cfg_cache_anc10_y[7:0]>
#define HEVCD_MCRCC_CTL3                           ((0x34f2  << 2) + 0xff620000)
// HEVCD_MCRCC_PERFMON_CTL
// [0]      percount_reset
// [3:1]    perfcount_sel
// [31:4]   reserved
// perfcount_sel[2:0]     perfcount
//     0                  raw_mcr_cnt
//     1                  hit_mcr_cnt
//     2                  byp_mcr_cnt_nchoutwin
//     3                  byp_mcr_cnt_nchcanv
//     4                  miss_mcr_cnt_0
//     5                  miss_mcr_cnt_1
//     6                  hit_mcr_cnt_0
//     7                  hit_mcr_cnt_1
#define HEVCD_MCRCC_PERFMON_CTL                    ((0x34f3  << 2) + 0xff620000)
// HEVCD_MCRCC_PERFMON_DATA
// [31:0]   percount_data
#define HEVCD_MCRCC_PERFMON_DATA                   ((0x34f4  << 2) + 0xff620000)
//////////////////////////////////////////////////////////////////////////////
///// VP9 Decoder Registers                               ////////////////////
//////////////////////////////////////////////////////////////////////////////
// VP9D_MPP_INTERPOL_CFG0
// [2:0]    VP9 MC Interpolation type
            // 0-3:perframe type 4:per partition type
// [3]      reserved
// [4]      V99 MV precision
            // 1:high precision else  mv=mv*2
// [31:5]   reserved
#define VP9D_MPP_INTERPOL_CFG0                     ((0x3440  << 2) + 0xff620000)
// VP9D_MPP_REF_SCALE_ENBL
// [7:0]    VP9 MC reference scaled info
// [15:0]   VP9 MC reference scaled dir 0:Dwn 1:Up
// [31:16]  reserved
#define VP9D_MPP_REF_SCALE_ENBL                    ((0x3441  << 2) + 0xff620000)
// VP9D_MPP_REFINFO_TBL_ACCCONFIG
// [1:0]    reserved
// [2]      auto_inc_index/field
// [5:3]    reference index   0:last 1:golden 2:altref
// [8:6]    info field 0:<ref_width[14:0]> 1:<ref_height[14:0]>
            //         2:<scale_x[26:0]  3:<scale_y[26:0]>
            //         4:<decomp_header1_offset[23:0]> -- 32byte aligned
// [31:9]   reserved
#define VP9D_MPP_REFINFO_TBL_ACCCONFIG             ((0x3442  << 2) + 0xff620000)
// VP9D_MPP_REFINFO_DATA
// [n:0]    refinfo_tbl[index]field]  wr_data/rd_data
#define VP9D_MPP_REFINFO_DATA                      ((0x3443  << 2) + 0xff620000)
//
// Closing file:  hevc_ipp_regs.h
//
//------------------------------------------------------------------------------
// HEVC_DBLK module level register offset
//------------------------------------------------------------------------------
//
// Reading file:  hevc_dblk_regs.h
//
// -----------------------------------------------
// CBUS_BASE:  DOS_HEVC_DBLK_CBUS_BASE = 0x05
// -----------------------------------------------
//cfg0[0];        //software_reset
//cfg0[1];        //status clear, only for axi error or pic_done
//cfg0[2];        //clock_forced_on_all
//cfg0[3];        //clock_forced_off_all
//cfg0[11:8];     //PU FIFO Threshold   , 0:16 1:1 ... 1:15
//cfg0[15:12];    //TU FIFO Threshold>>4, 0:16<<4 1:1<<4 ... 1:15<<4
//cfg0[29:16];    //clock_forced_on_submodules
#define HEVC_DBLK_CFG0                             ((0x3500  << 2) + 0xff620000)
//cfg1[1:0];      //ctb_size 0:64x64 1:32x32 2:16x16
//cfg1[2];        //ignore_out_of_boundary
//cfg1[3];        //pcm_loop_filter_disabled_flag
//cfg1[8:4];      //pps_cb_qp_offset (-12~12,inclusive)
//cfg1[13:9];     //pps_cr_qp_offset (-12~12,inclusive)
//cfg1[14];       //ctbx,y swap in pu i/f
//cfg1[15];       //sao_corner_45_degree_all_software_control
#define HEVC_DBLK_CFG1                             ((0x3501  << 2) + 0xff620000)
//cfg2[15:0];     //picture_size_width
//cfg2[31:16];    //picture_size_height
#define HEVC_DBLK_CFG2                             ((0x3502  << 2) + 0xff620000)
//cfg3[3:0];      //parameter_axi_arid
//cfg3[7:4];      //parameter_axi_awid
//cfg3[11:8];     //parameter_axi_wid
//cfg3[12];       //parameter_axi_not_check_write_response
//cfg3[19:16];    //data_axi_arid
//cfg3[23:20];    //data_axi_awid
//cfg3[27:24];    //data_axi_wid
//cfg3[28];       //data_axi_not_check_write_response
#define HEVC_DBLK_CFG3                             ((0x3503  << 2) + 0xff620000)
//cfg4[31:0];     //parameter_axi_start_address
#define HEVC_DBLK_CFG4                             ((0x3504  << 2) + 0xff620000)
//cfg5[31:0];     //data_axi_start_address
#define HEVC_DBLK_CFG5                             ((0x3505  << 2) + 0xff620000)
//cfg6[9:0];      //tile_ctbx
//cfg6[25:16];    //tile_ctby
//cfg6[31];       //tile_enabled
#define HEVC_DBLK_CFG6                             ((0x3506  << 2) + 0xff620000)
//cfg7[9:0];      //tile_ctbxsize
//cfg7[25:16];    //tile_ctbysize
#define HEVC_DBLK_CFG7                             ((0x3507  << 2) + 0xff620000)
//cfg8[9:0];      //start_ctbx, normally equals to tile_ctbx
//cfg8[25:16];    //start_ctby, normally equals to tile_ctby
//cfg8[31];       //start, self_cleared signal, normally set it at the begin of tile
#define HEVC_DBLK_CFG8                             ((0x3508  << 2) + 0xff620000)
//cfg9[0]         //loop_filter_across_tiles_enabled_flag
//cfg9[1]         //loop_filter_across_slices_enabled_flag
//cfg9[2]         //deblocking_filter_disabled_flag
//cfg9[6:3]       //beta_offset_div2 (-6~6,inclusive)
//cfg9[10:7]      //tc_offset_div2 (-6~6,inclusive)
#define HEVC_DBLK_CFG9                             ((0x3509  << 2) + 0xff620000)
//cfga[4:0]       //corner45degree{FIFO_CNT}
//cfga[31:27]     //corner45degree{EN,FIFO_CLR,FIFO_PUSH,DATA,DATA_SEL}
#define HEVC_DBLK_CFGA                             ((0x350a  << 2) + 0xff620000)
//cfgb[3:0]       //0:HEVC 1:VP9 ...
#define HEVC_DBLK_CFGB                             ((0x350b  << 2) + 0xff620000)
//cfgc[31:0]      //cfg_addr_y1
#define HEVC_DBLK_CFGC                             ((0x350c  << 2) + 0xff620000)
//TODO description
#define HEVC_DBLK_STS0                             ((0x350d  << 2) + 0xff620000)
//TODO description
#define HEVC_DBLK_STS1                             ((0x350e  << 2) + 0xff620000)
//
// Closing file:  hevc_dblk_regs.h
//
//------------------------------------------------------------------------------
// HEVC_SAO module level register offset
//------------------------------------------------------------------------------
//
// Reading file:  hevc_sao_regs.h
//
// -----------------------------------------------
// CBUS_BASE:  DOS_HEVC_SAO_CBUS_BASE = 0x06
// -----------------------------------------------
#define HEVC_SAO_VERSION                           ((0x3600  << 2) + 0xff620000)
//  [31:0]  reversion               default:32'h00010001
#define HEVC_SAO_CTRL0                             ((0x3601  << 2) + 0xff620000)
//  [3:0]   lcu_size_log2
//  [31]    above intermedia data compress: 0=no-compress,1=compress;default:1'b0
#define HEVC_SAO_CTRL1                             ((0x3602  << 2) + 0xff620000)
//  [31:24] ar_fifo1_axi_thred
//  [23:16] ar_fifo0_axi_thred
//  [15:14] axi_linealign, 0-16bytes, 1-32bytes, 2-64bytes
//  [13:12] axi_aformat, 0-Linear, 1-32x32, 2-64x32
//  [11:08] axi_lendian_C
//  [07:04] axi_lendian_Y
//  [3]     reserved
//  [2]     clk_forceon
//  [1]     dw_disable:disable double write output
//  [0]     cm_disable:disable compress output
#define HEVC_SAO_INT_EN                            ((0x3603  << 2) + 0xff620000)
//  [0]     sao_int_enable
//  [1]     sao_int_amrisc_level
//  [2]     sao_int_cpu_level
//  [3]     slice_done_int_amrisc_enable
//  [4]     slice_done_int_cpu_enable
//  [15]    disable_sao_int_clock_gating
#define HEVC_SAO_INT_STATUS                        ((0x3604  << 2) + 0xff620000)
//  [0]     slice_done IRQ
//  [31]    write "1"=slice start(self clear,read always return "0")
#define HEVC_SAO_PIC_SIZE                          ((0x3605  << 2) + 0xff620000)
//  [15:0]  pic_width[15:0]
//  [31:16] pic_height[15:0]
#define HEVC_SAO_PIC_SIZE_LCU                      ((0x3606  << 2) + 0xff620000)
//  [15:0]  lcu_x_num_1[15:0]   (=lcu_x_total-1)
//  [31:16] lcu_y_num_1[15:0]   (=lcu_y_total-1)
#define HEVC_SAO_TILE_START                        ((0x3607  << 2) + 0xff620000)
//  [15:0]  tile_start_lcu_x[15:0]
//  [31:16] tile_start_lcu_y[15:0]
#define HEVC_SAO_TILE_SIZE_LCU                     ((0x3608  << 2) + 0xff620000)
//  [15:0]  tile_width_lcu[15:0]
//  [31:16] tile_height_lcu[15:0]
#define HEVC_SAO_AXI_WCTRL                         ((0x3609  << 2) + 0xff620000)
#define HEVC_SAO_AXI_RCTRL                         ((0x360a  << 2) + 0xff620000)
#define HEVC_SAO_Y_START_ADDR                      ((0x360b  << 2) + 0xff620000)
#define HEVC_SAO_Y_LENGTH                          ((0x360c  << 2) + 0xff620000)
#define HEVC_SAO_C_START_ADDR                      ((0x360d  << 2) + 0xff620000)
#define HEVC_SAO_C_LENGTH                          ((0x360e  << 2) + 0xff620000)
#define HEVC_SAO_Y_WPTR                            ((0x360f  << 2) + 0xff620000)
#define HEVC_SAO_C_WPTR                            ((0x3610  << 2) + 0xff620000)
#define HEVC_SAO_ABV_START_ADDR                    ((0x3611  << 2) + 0xff620000)
#define HEVC_SAO_VB_WR_START_ADDR                  ((0x3612  << 2) + 0xff620000)
#define HEVC_SAO_VB_RD_START_ADDR                  ((0x3613  << 2) + 0xff620000)
#define HEVC_SAO_ABV_WPTR                          ((0x3614  << 2) + 0xff620000)
#define HEVC_SAO_ABV_RPTR                          ((0x3615  << 2) + 0xff620000)
#define HEVC_SAO_VB_WPTR                           ((0x3616  << 2) + 0xff620000)
#define HEVC_SAO_VB_RPTR                           ((0x3617  << 2) + 0xff620000)
#define HEVC_SAO_DBG_MODE0                         ((0x361e  << 2) + 0xff620000)
#define HEVC_SAO_DBG_MODE1                         ((0x361f  << 2) + 0xff620000)
#define HEVC_SAO_CTRL2                             ((0x3620  << 2) + 0xff620000)
#define HEVC_SAO_CTRL3                             ((0x3621  << 2) + 0xff620000)
#define HEVC_SAO_CTRL4                             ((0x3622  << 2) + 0xff620000)
#define HEVC_SAO_CTRL5                             ((0x3623  << 2) + 0xff620000)
//[23:22]  dw_h1_ctrl   default:2'b11
//[21:20]  dw_h0_ctrl   default:2'b11
//[19:18]  dw_h1_ctrl   default:2'b11
//[17:16]  dw_h0_ctrl   default:2'b11
#define HEVC_SAO_CTRL6                             ((0x3624  << 2) + 0xff620000)
#define HEVC_SAO_CTRL7                             ((0x3625  << 2) + 0xff620000)
#define HEVC_CM_BODY_START_ADDR                    ((0x3626  << 2) + 0xff620000)
#define HEVC_CM_BODY_LENGTH                        ((0x3627  << 2) + 0xff620000)
#define HEVC_CM_HEADER_START_ADDR                  ((0x3628  << 2) + 0xff620000)
#define HEVC_CM_HEADER_LENGTH                      ((0x3629  << 2) + 0xff620000)
#define HEVC_CM_COLOR                              ((0x362a  << 2) + 0xff620000)
#define HEVC_CM_HEADER_OFFSET                      ((0x362b  << 2) + 0xff620000)
#define HEVC_SAO_CTRL8                             ((0x362c  << 2) + 0xff620000)
#define HEVC_SAO_CTRL9                             ((0x362d  << 2) + 0xff620000)
#define HEVC_SAO_CTRL10                            ((0x362e  << 2) + 0xff620000)
#define HEVC_SAO_CTRL11                            ((0x362f  << 2) + 0xff620000)
#define HEVC_SAO_DBG_DATA_0                        ((0x3630  << 2) + 0xff620000)
#define HEVC_SAO_DBG_DATA_1                        ((0x3631  << 2) + 0xff620000)
#define HEVC_SAO_DBG_DATA_2                        ((0x3632  << 2) + 0xff620000)
#define HEVC_SAO_DBG_DATA_3                        ((0x3633  << 2) + 0xff620000)
#define HEVC_SAO_DBG_DATA_4                        ((0x3634  << 2) + 0xff620000)
#define HEVC_SAO_DBG_DATA_5                        ((0x3635  << 2) + 0xff620000)
#define HEVC_SAO_DBG_DATA_6                        ((0x3636  << 2) + 0xff620000)
#define HEVC_SAO_DBG_DATA_7                        ((0x3637  << 2) + 0xff620000)
#define HEVC_SAO_MMU_WR                            ((0x3638  << 2) + 0xff620000)
#define HEVC_SAO_MMU_STATUS                        ((0x3639  << 2) + 0xff620000)
//Read Only
//sao_mmu_fifo is 16(depth)x20(bits)
//[0]   mmu_fifo_empty  1=empty,0=not-empty
//[1]   mmu_fifo_full   1=full,0=not-full
//[7:4] mmu_fifo_depth[3:0]
//[11:8] mmu_fifo_room[3:0]
#define HEVC_SAO_MMU_VH0_ADDR                      ((0x363a  << 2) + 0xff620000)
#define HEVC_SAO_MMU_VH1_ADDR                      ((0x363b  << 2) + 0xff620000)
#define HEVC_SAO_MMU_WPTR                          ((0x363c  << 2) + 0xff620000)
#define HEVC_SAO_MMU_RPTR                          ((0x363d  << 2) + 0xff620000)
//
// Closing file:  hevc_sao_regs.h
//
//------------------------------------------------------------------------------
// HEVC_IQIT module level register offset
//------------------------------------------------------------------------------
//
// Reading file:  hevc_iqit_regs.h
//
// -----------------------------------------------
// CBUS_BASE:  DOS_HEVC_IQIT_CBUS_BASE = 0x07
// -----------------------------------------------
// [    2] RW en_freeclk.   0=Auto-gated clock for saving power;
//                          1=Free running clock if something wrong with auto-gating.
//                          Default 0.
// [    1] RW enable_clk.   0=Disable clock; 1=Enable clock.        Default 0.
#define HEVC_IQIT_CLK_RST_CTRL                     ((0x3700  << 2) + 0xff620000)
// [ 5: 4] RW ctb_size.     0=8x8; 1=16x16; 2=32x32; 3=64x64.                       Default 0.
// [    3] RW itr_skip_mode. For dealing with discrepancy between Spec and C model for transform_skip.
//                          0=Follow Spec; 1=Follow C model.                        Default 0.
// [    2] RW scalelist_mode. Applicable only when scalelist_en=1.
//                          0=Use default scaling factor list;
//                          1=Use scaling factor list define in bit stream.
//                          Default 0.
// [    1] RW scalelist_en. 0=Use flat scale; 1=Use scaling factor list.            Default 0.
// [    0] RW diagscan_en.  0=Linear lookup dQ table; 1=Diagonally lookup dQ table. Default 0.
#define HEVC_IQIT_DEQUANT_CTRL                     ((0x3701  << 2) + 0xff620000)
// [31:10] WR Reserved.                                 Default 0.
// [ 9: 0] WR scalelut_addr.                            Default 0.
#define HEVC_IQIT_SCALELUT_WR_ADDR                 ((0x3702  << 2) + 0xff620000)
// [31:10] RD Reserved.                                 Default 0.
// [ 9: 0] RD scalelut_addr.                            Default 0.
#define HEVC_IQIT_SCALELUT_RD_ADDR                 ((0x3703  << 2) + 0xff620000)
// [ 7: 0] RW LUT data.
#define HEVC_IQIT_SCALELUT_DATA                    ((0x3704  << 2) + 0xff620000)
//---------------------------------------------------
// tab_idx [2:0] -
//    0-5 use custom table index
//    6 - reserved
//    7 - use default table
//---------------------------------------------------
// [22:20] 4x4 tab 5
// [   19] reserved
// [18:16] 4x4 tab 4
// [   15] reserved
// [14:12] 4x4 tab 3
// [   11] reserved
// [10: 8] 4x4 tab 2
// [    7] reserved
// [ 6: 4] 4x4 tab 1
// [    3] reserved
// [ 2: 0] 4x4 tab 0
#define HEVC_IQIT_SCALELUT_IDX_4                   ((0x3705  << 2) + 0xff620000)
// [22:20] 8x8 tab 5
// [   19] reserved
// [18:16] 8x8 tab 4
// [   15] reserved
// [14:12] 8x8 tab 3
// [   11] reserved
// [10: 8] 8x8 tab 2
// [    7] reserved
// [ 6: 4] 8x8 tab 1
// [    3] reserved
// [ 2: 0] 8x8 tab 0
#define HEVC_IQIT_SCALELUT_IDX_8                   ((0x3706  << 2) + 0xff620000)
// [   31] reserved
// [30:28] 32x32 tab 1
// [   27] reserved
// [26:24] 32x32 tab 0
// [   23] reserved
// [22:20] 16x16 tab 5
// [   19] reserved
// [18:16] 16x16 tab 4
// [   15] reserved
// [14:12] 16x16 tab 3
// [   11] reserved
// [10: 8] 16x16 tab 2
// [    7] reserved
// [ 6: 4] 16x16 tab 1
// [    3] reserved
// [ 2: 0] 16x16 tab 0
#define HEVC_IQIT_SCALELUT_IDX_16_32               ((0x3707  << 2) + 0xff620000)
// [ 8: 2] R  tuinfo_fifo_cnt.
// [    1] R  fifo_has_room.
// [    0] R  mem_init_done.
#define HEVC_IQIT_STAT_GEN0                        ((0x3708  << 2) + 0xff620000)
// [   23] RW cntl_qp_cr_valid.
// [21:16] RW cntl_qp_cr.
// [   15] RW cntl_qp_cb_valid.
// [13: 8] RW cntl_qp_cb.
// [    7] RW cntl_qp_y_valid.
// [ 5: 0] RW cntl_qp_y.
#define HEVC_QP_WRITE                              ((0x3709  << 2) + 0xff620000)
// [31:30] R  ipp_size.
// [28:24] R  ipp_mem_ptr.
// [23:22] R  itr2_size.
// [20:16] R  itr2_mem_ptr.
// [15:14] R  itr1_size.
// [12: 8] R  itr1_mem_ptr.
// [ 7: 6] R  iq_size.
// [ 4: 0] R  iq_mem_ptr.
#define HEVC_IQIT_STAT_GEN1                        ((0x370a  << 2) + 0xff620000)
// [ 5: 4] RW cntl_bitdepth_c. 0=8-bit; 1=9-bit; 2=10-bit.
// [ 1: 0] RW cntl_bitdepth_y. 0=8-bit; 1=9-bit; 2=10-bit.
#define HEVC_IQIT_BITDEPTH                         ((0x370b  << 2) + 0xff620000)
// [   10] R  ipp_active.
// [    9] R  itr2_active.
// [    8] R  itr1_active.
// [ 5: 0] R  mem_spare_num.
#define HEVC_IQIT_STAT_GEN2                        ((0x370c  << 2) + 0xff620000)
#define HEVC_IQIT_AVS2_WQP_0123                    ((0x370d  << 2) + 0xff620000)
#define HEVC_IQIT_AVS2_WQP_45                      ((0x370e  << 2) + 0xff620000)
#define HEVC_IQIT_AVS2_QP_DELTA                    ((0x370f  << 2) + 0xff620000)
//
// Closing file:  hevc_iqit_regs.h
//
//------------------------------------------------------------------------------
//  DOS top-level register offset
//------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  DOS_TOP_CBUS_BASE = 0x3f
// -----------------------------------------------
// [0]  reserved
// [1]  Reset Dos top level registers, except sw_reset0/1/2 which is only reset by external reset_n.
// [2]  VDEC1 Reset assist, mdec's CBUS
// [3]  VDEC1 Reset mdec's VLD
// [4]  VDEC1 Reset mdec's VLD
// [5]  VDEC1 Reset mdec's VLD
// [6]  VDEC1 Reset mdec's IQIDCT
// [7]  VDEC1 Reset mdec's MC
// [8]  VDEC1 Reset mdec's DBLK
// [9]  VDEC1 Reset mdec's PIC_DC
// [10] VDEC1 Reset mdec's Pscale
// [11] VDEC1 Reset vcpu's MCPU
// [12] VDEC1 Reset vcpu's CCPU
// [13] VDEC1 Reset mmc_pre_arb
#define DOS_SW_RESET0                              ((0x3f00  << 2) + 0xff620000)
// [31:27] reserved
// [26] hcodec clk_en for henc assist
// [25:22] reserved
// [21] hcodec clk_en for henc qdct
// [20] hcodec clk_en for henc vlc
// [19] hcodec clk_en for assist and cbus
// [18] hcodec clk_en for ddr
// [17] hcodec clk_en for vcpu
// [16] hcodec clk_en for hdec assist
// [15] hcodec clk_en for hdec dblk
// [14] reserved
// [13] hcodec clk_en for hdec mc
// [12] hcodec clk_en for hdec pic_dc
// [11:10] reserved
// [9] vdec clk_en for vdec assist and cbus
// [8] vdec clk_en for ddr
// [7] vdec clk_en for vcpu
// [6] vdec clk_en for mdec vld
// [5] vdec clk_en for mdec psc
// [4] vdec clk_en for mdec pic_dc
// [3] vdec clk_en for mdec mc
// [2] vdec clk_en for mdec iqidct
// [1] vdec clk_en for mdec dblk
// [0] vdec clk_en for mdec assist
#define DOS_GCLK_EN0                               ((0x3f01  << 2) + 0xff620000)
#define DOS_GEN_CTRL0                              ((0x3f02  << 2) + 0xff620000)
#define DOS_APB_ERR_CTRL                           ((0x3f03  << 2) + 0xff620000)
#define DOS_APB_ERR_STAT                           ((0x3f04  << 2) + 0xff620000)
#define DOS_VDEC_INT_EN                            ((0x3f05  << 2) + 0xff620000)
#define DOS_HCODEC_INT_EN                          ((0x3f06  << 2) + 0xff620000)
// [0]  Reserved
// [1]  Reserved
// [2]  HCODEC Reset assist, hdec's CBUS
// [3]  HCODEC Reset hdec's VLD
// [4]  HCODEC Reset hdec's VLD
// [5]  HCODEC Reset hdec's VLD
// [6]  HCODEC Reset hdec's IQIDCT
// [7]  HCODEC Reset hdec's MC
// [8]  HCODEC Reset hdec's DBLK
// [9]  HCODEC Reset hdec's PIC_DC
// [10] HCODEC Reset hdec's Pscale
// [11] HCODEC Reset vcpu's MCPU
// [12] HCODEC Reset vcpu's CCPU
// [13] HCODEC Reset mmc_pre_arb
// [14] HCODEC Reserved
// [15] HCODEC Reserved
// [16] HCODEC Reset henc's VLC
#define DOS_SW_RESET1                              ((0x3f07  << 2) + 0xff620000)
// [0]  Reserved
// [1]  Reserved
// [2]  VDEC2 Reset assist, mdec's CBUS
// [3]  VDEC2 Reset mdec's VLD
// [4]  VDEC2 Reset mdec's VLD
// [5]  VDEC2 Reset mdec's VLD
// [6]  VDEC2 Reset mdec's IQIDCT
// [7]  VDEC2 Reset mdec's MC
// [8]  VDEC2 Reset mdec's DBLK
// [9]  VDEC2 Reset mdec's PIC_DC
// [10] VDEC2 Reset mdec's Pscale
// [11] VDEC2 Reset vcpu's MCPU
// [12] VDEC2 Reset vcpu's CCPU
// [13] VDEC2 Reset mmc_pre_arb
#define DOS_SW_RESET2                              ((0x3f08  << 2) + 0xff620000)
// [31:10] Reserved
// [9] vdec2 clk_en for assist and cbus.
// [8] vdec2 clk_en for ddr;
// [7] vdec2 clk_en for vcpu;
// [6] vdec2 clk_en for mdec vld
// [5] vdec2 clk_en for mdec psc
// [4] vdec2 clk_en for mdec pic_dc
// [3] vdec2 clk_en for mdec mc
// [2] vdec2 clk_en for mdec iqidct
// [1] vdec2 clk_en for mdec dblk
// [0] vdec2 clk_en for mdec assist
#define DOS_GCLK_EN1                               ((0x3f09  << 2) + 0xff620000)
#define DOS_VDEC2_INT_EN                           ((0x3f0a  << 2) + 0xff620000)
#define DOS_VDIN_LCNT                              ((0x3f0b  << 2) + 0xff620000)
#define DOS_VDIN_FCNT                              ((0x3f0c  << 2) + 0xff620000)
#define DOS_VDIN_CCTL                              ((0x3f0d  << 2) + 0xff620000)
#define DOS_SCRATCH0                               ((0x3f10  << 2) + 0xff620000)
#define DOS_SCRATCH1                               ((0x3f11  << 2) + 0xff620000)
#define DOS_SCRATCH2                               ((0x3f12  << 2) + 0xff620000)
#define DOS_SCRATCH3                               ((0x3f13  << 2) + 0xff620000)
#define DOS_SCRATCH4                               ((0x3f14  << 2) + 0xff620000)
#define DOS_SCRATCH5                               ((0x3f15  << 2) + 0xff620000)
#define DOS_SCRATCH6                               ((0x3f16  << 2) + 0xff620000)
#define DOS_SCRATCH7                               ((0x3f17  << 2) + 0xff620000)
#define DOS_SCRATCH8                               ((0x3f18  << 2) + 0xff620000)
#define DOS_SCRATCH9                               ((0x3f19  << 2) + 0xff620000)
#define DOS_SCRATCH10                              ((0x3f1a  << 2) + 0xff620000)
#define DOS_SCRATCH11                              ((0x3f1b  << 2) + 0xff620000)
#define DOS_SCRATCH12                              ((0x3f1c  << 2) + 0xff620000)
#define DOS_SCRATCH13                              ((0x3f1d  << 2) + 0xff620000)
#define DOS_SCRATCH14                              ((0x3f1e  << 2) + 0xff620000)
#define DOS_SCRATCH15                              ((0x3f1f  << 2) + 0xff620000)
#define DOS_SCRATCH16                              ((0x3f20  << 2) + 0xff620000)
#define DOS_SCRATCH17                              ((0x3f21  << 2) + 0xff620000)
#define DOS_SCRATCH18                              ((0x3f22  << 2) + 0xff620000)
#define DOS_SCRATCH19                              ((0x3f23  << 2) + 0xff620000)
#define DOS_SCRATCH20                              ((0x3f24  << 2) + 0xff620000)
#define DOS_SCRATCH21                              ((0x3f25  << 2) + 0xff620000)
#define DOS_SCRATCH22                              ((0x3f26  << 2) + 0xff620000)
#define DOS_SCRATCH23                              ((0x3f27  << 2) + 0xff620000)
#define DOS_SCRATCH24                              ((0x3f28  << 2) + 0xff620000)
#define DOS_SCRATCH25                              ((0x3f29  << 2) + 0xff620000)
#define DOS_SCRATCH26                              ((0x3f2a  << 2) + 0xff620000)
#define DOS_SCRATCH27                              ((0x3f2b  << 2) + 0xff620000)
#define DOS_SCRATCH28                              ((0x3f2c  << 2) + 0xff620000)
#define DOS_SCRATCH29                              ((0x3f2d  << 2) + 0xff620000)
#define DOS_SCRATCH30                              ((0x3f2e  << 2) + 0xff620000)
#define DOS_SCRATCH31                              ((0x3f2f  << 2) + 0xff620000)
#define DOS_MEM_PD_VDEC                            ((0x3f30  << 2) + 0xff620000)
#define DOS_MEM_PD_VDEC2                           ((0x3f31  << 2) + 0xff620000)
#define DOS_MEM_PD_HCODEC                          ((0x3f32  << 2) + 0xff620000)
#define DOS_MEM_PD_HEVC                            ((0x3f33  << 2) + 0xff620000)
#define DOS_SW_RESET3                              ((0x3f34  << 2) + 0xff620000)
#define DOS_GCLK_EN3                               ((0x3f35  << 2) + 0xff620000)
#define DOS_HEVC_INT_EN                            ((0x3f36  << 2) + 0xff620000)
#define DOS_SW_RESET4                              ((0x3f37  << 2) + 0xff620000)
#define DOS_GCLK_EN4                               ((0x3f38  << 2) + 0xff620000)
#define DOS_MEM_PD_VP9DEC                          ((0x3f39  << 2) + 0xff620000)
// bit[31]    mcrcc_stall_en
// bit[30:28] Reserved
// bit[27:20] target_canvas
// bit[19:10] target_mby
// bit[ 9: 0] target_mbx
#define DOS_VDEC_MCRCC_STALL_CTRL                  ((0x3f40  << 2) + 0xff620000)
#define DOS_VDEC_MCRCC_STALL2_CTRL                 ((0x3f42  << 2) + 0xff620000)
#define DOS_VDEC2_MCRCC_STALL_CTRL                 ((0x3f41  << 2) + 0xff620000)
#define DOS_VDEC2_MCRCC_STALL2_CTRL                ((0x3f43  << 2) + 0xff620000)
// bit[1] s_clk off
// bit[0] m_clk off
#define DOS_CFG_CMPIF_BRIDGE                       ((0x3f44  << 2) + 0xff620000)
#define DOS_SECURE_CTL_INDEX                       ((0x3f80  << 2) + 0xff620000)
#define DOS_SECURE_CTL_DATA                        ((0x3f81  << 2) + 0xff620000)
#define DOS_SECURE_REG_NULL                        ((0x3f82  << 2) + 0xff620000)
//
// Closing file:  ./dos_param.h
//
//
// Reading file:  mdec_regs.h
//
//========================================================================
//  MDEC module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_VDEC_MDEC_CBUS_BASE = 0x09
// -----------------------------------------------
#define HCODEC_MC_CTRL_REG                         ((0x1900  << 2) + 0xff620000)
#define HCODEC_MC_MB_INFO                          ((0x1901  << 2) + 0xff620000)
#define HCODEC_MC_PIC_INFO                         ((0x1902  << 2) + 0xff620000)
#define HCODEC_MC_HALF_PEL_ONE                     ((0x1903  << 2) + 0xff620000)
#define HCODEC_MC_HALF_PEL_TWO                     ((0x1904  << 2) + 0xff620000)
#define HCODEC_POWER_CTL_MC                        ((0x1905  << 2) + 0xff620000)
#define HCODEC_MC_CMD                              ((0x1906  << 2) + 0xff620000)
#define HCODEC_MC_CTRL0                            ((0x1907  << 2) + 0xff620000)
#define HCODEC_MC_PIC_W_H                          ((0x1908  << 2) + 0xff620000)
#define HCODEC_MC_STATUS0                          ((0x1909  << 2) + 0xff620000)
#define HCODEC_MC_STATUS1                          ((0x190a  << 2) + 0xff620000)
#define HCODEC_MC_CTRL1                            ((0x190b  << 2) + 0xff620000)
#define HCODEC_MC_MIX_RATIO0                       ((0x190c  << 2) + 0xff620000)
#define HCODEC_MC_MIX_RATIO1                       ((0x190d  << 2) + 0xff620000)
#define HCODEC_MC_DP_MB_XY                         ((0x190e  << 2) + 0xff620000)
#define HCODEC_MC_OM_MB_XY                         ((0x190f  << 2) + 0xff620000)
#define HCODEC_PSCALE_RST                          ((0x1910  << 2) + 0xff620000)
#define HCODEC_PSCALE_CTRL                         ((0x1911  << 2) + 0xff620000)
#define HCODEC_PSCALE_PICI_W                       ((0x1912  << 2) + 0xff620000)
#define HCODEC_PSCALE_PICI_H                       ((0x1913  << 2) + 0xff620000)
#define HCODEC_PSCALE_PICO_W                       ((0x1914  << 2) + 0xff620000)
#define HCODEC_PSCALE_PICO_H                       ((0x1915  << 2) + 0xff620000)
#define HCODEC_PSCALE_PICO_START_X                 ((0x1916  << 2) + 0xff620000)
#define HCODEC_PSCALE_PICO_START_Y                 ((0x1917  << 2) + 0xff620000)
#define HCODEC_PSCALE_DUMMY                        ((0x1918  << 2) + 0xff620000)
#define HCODEC_PSCALE_FILT0_COEF0                  ((0x1919  << 2) + 0xff620000)
#define HCODEC_PSCALE_FILT0_COEF1                  ((0x191a  << 2) + 0xff620000)
#define HCODEC_PSCALE_CMD_CTRL                     ((0x191b  << 2) + 0xff620000)
#define HCODEC_PSCALE_CMD_BLK_X                    ((0x191c  << 2) + 0xff620000)
#define HCODEC_PSCALE_CMD_BLK_Y                    ((0x191d  << 2) + 0xff620000)
#define HCODEC_PSCALE_STATUS                       ((0x191e  << 2) + 0xff620000)
#define HCODEC_PSCALE_BMEM_ADDR                    ((0x191f  << 2) + 0xff620000)
#define HCODEC_PSCALE_BMEM_DAT                     ((0x1920  << 2) + 0xff620000)
#define HCODEC_PSCALE_DRAM_BUF_CTRL                ((0x1921  << 2) + 0xff620000)
#define HCODEC_PSCALE_MCMD_CTRL                    ((0x1922  << 2) + 0xff620000)
#define HCODEC_PSCALE_MCMD_XSIZE                   ((0x1923  << 2) + 0xff620000)
#define HCODEC_PSCALE_MCMD_YSIZE                   ((0x1924  << 2) + 0xff620000)
#define HCODEC_PSCALE_RBUF_START_BLKX              ((0x1925  << 2) + 0xff620000)
#define HCODEC_PSCALE_RBUF_START_BLKY              ((0x1926  << 2) + 0xff620000)
//`define PSCALE_RBUF_MB_WIDTH   8'h27
#define HCODEC_PSCALE_PICO_SHIFT_XY                ((0x1928  << 2) + 0xff620000)
#define HCODEC_PSCALE_CTRL1                        ((0x1929  << 2) + 0xff620000)
//Bit 15, wmask enable
//Bit 14:13, filt0 srckey_less,
//Bit 12:11, filt1 srckey_less, in the case of the interpolated data is equal distance to
//key data and normal data, 00: select normal data, 01: select right data, 10: select key data
//Bit 10:9, srckey mode, 00: equal, 01: less than or equal, 10: great than or equal
//Bit 8, src key enable
//Bit 7:0, y src key
#define HCODEC_PSCALE_SRCKEY_CTRL0                 ((0x192a  << 2) + 0xff620000)
//Bit 15:8, cb src key
//Bit 7:0, cr src key
#define HCODEC_PSCALE_SRCKEY_CTRL1                 ((0x192b  << 2) + 0xff620000)
//Bit 22:16 canvas_rd_addr2
//Bit 14:8 canvas_rd_addr1
//Bit 6:0 canvas_rd_addr1
#define HCODEC_PSCALE_CANVAS_RD_ADDR               ((0x192c  << 2) + 0xff620000)
//Bit 22:16 canvas_wr_addr2
//Bit 14:8 canvas_wr_addr1
//Bit 6:0 canvas_wr_addr1
#define HCODEC_PSCALE_CANVAS_WR_ADDR               ((0x192d  << 2) + 0xff620000)
//bit 13:8 pscale thread ID and token
//bit 7 disable write response count adding to busy bit
//bit 5:0  pscale prearbitor burst num
#define HCODEC_PSCALE_CTRL2                        ((0x192e  << 2) + 0xff620000)
//   31 - use_omem_mb_xy_auto
//23:16 - omem_max_mb_x
//15:8  - omem_mb_y_auto
// 7:0  - omem_mb_x_auto
#define HCODEC_HDEC_MC_OMEM_AUTO                   ((0x1930  << 2) + 0xff620000)
#define HCODEC_HDEC_MC_MBRIGHT_IDX                 ((0x1931  << 2) + 0xff620000)
#define HCODEC_HDEC_MC_MBRIGHT_RD                  ((0x1932  << 2) + 0xff620000)
#define HCODEC_MC_MPORT_CTRL                       ((0x1940  << 2) + 0xff620000)
#define HCODEC_MC_MPORT_DAT                        ((0x1941  << 2) + 0xff620000)
#define HCODEC_MC_WT_PRED_CTRL                     ((0x1942  << 2) + 0xff620000)
#define HCODEC_MC_MBBOT_ST_EVEN_ADDR               ((0x1944  << 2) + 0xff620000)
#define HCODEC_MC_MBBOT_ST_ODD_ADDR                ((0x1945  << 2) + 0xff620000)
#define HCODEC_MC_DPDN_MB_XY                       ((0x1946  << 2) + 0xff620000)
#define HCODEC_MC_OMDN_MB_XY                       ((0x1947  << 2) + 0xff620000)
#define HCODEC_MC_HCMDBUF_H                        ((0x1948  << 2) + 0xff620000)
#define HCODEC_MC_HCMDBUF_L                        ((0x1949  << 2) + 0xff620000)
#define HCODEC_MC_HCMD_H                           ((0x194a  << 2) + 0xff620000)
#define HCODEC_MC_HCMD_L                           ((0x194b  << 2) + 0xff620000)
#define HCODEC_MC_IDCT_DAT                         ((0x194c  << 2) + 0xff620000)
#define HCODEC_MC_CTRL_GCLK_CTRL                   ((0x194d  << 2) + 0xff620000)
#define HCODEC_MC_OTHER_GCLK_CTRL                  ((0x194e  << 2) + 0xff620000)
//Bit 29:24, mbbot thread ID and token
//Bit 21:16, mc read/write thread ID and token
//Bit 13:8,  mbbot pre-arbitor burst number
//Bit 5:0,   mc pre-arbitor burst number
#define HCODEC_MC_CTRL2                            ((0x194f  << 2) + 0xff620000)
// `define DBLK_QUANT            8'h76 // ONLY for $ucode/real/amrisc/rv.s, reg value from apollo
//`define ANC1_CANVAS_ADDR      8'h80
//`define ANC2_CANVAS_ADDR      8'h81
//`define REC_CANVAS_ADDR       8'h89
//`define MDEC_PIC_W          8'h8c
//`define MDEC_PIC_H          8'h8d
// mdec_pic_dc_mux_ctrl[31]  -- mcr_hevc_mode
#define HCODEC_MDEC_PIC_DC_MUX_CTRL                ((0x198d  << 2) + 0xff620000)
#define HCODEC_MDEC_PIC_DC_CTRL                    ((0x198e  << 2) + 0xff620000)
#define HCODEC_MDEC_PIC_DC_STATUS                  ((0x198f  << 2) + 0xff620000)
#define HCODEC_ANC0_CANVAS_ADDR                    ((0x1990  << 2) + 0xff620000)
#define HCODEC_ANC1_CANVAS_ADDR                    ((0x1991  << 2) + 0xff620000)
#define HCODEC_ANC2_CANVAS_ADDR                    ((0x1992  << 2) + 0xff620000)
#define HCODEC_ANC3_CANVAS_ADDR                    ((0x1993  << 2) + 0xff620000)
#define HCODEC_ANC4_CANVAS_ADDR                    ((0x1994  << 2) + 0xff620000)
#define HCODEC_ANC5_CANVAS_ADDR                    ((0x1995  << 2) + 0xff620000)
#define HCODEC_ANC6_CANVAS_ADDR                    ((0x1996  << 2) + 0xff620000)
#define HCODEC_ANC7_CANVAS_ADDR                    ((0x1997  << 2) + 0xff620000)
#define HCODEC_ANC8_CANVAS_ADDR                    ((0x1998  << 2) + 0xff620000)
#define HCODEC_ANC9_CANVAS_ADDR                    ((0x1999  << 2) + 0xff620000)
#define HCODEC_ANC10_CANVAS_ADDR                   ((0x199a  << 2) + 0xff620000)
#define HCODEC_ANC11_CANVAS_ADDR                   ((0x199b  << 2) + 0xff620000)
#define HCODEC_ANC12_CANVAS_ADDR                   ((0x199c  << 2) + 0xff620000)
#define HCODEC_ANC13_CANVAS_ADDR                   ((0x199d  << 2) + 0xff620000)
#define HCODEC_ANC14_CANVAS_ADDR                   ((0x199e  << 2) + 0xff620000)
#define HCODEC_ANC15_CANVAS_ADDR                   ((0x199f  << 2) + 0xff620000)
#define HCODEC_ANC16_CANVAS_ADDR                   ((0x19a0  << 2) + 0xff620000)
#define HCODEC_ANC17_CANVAS_ADDR                   ((0x19a1  << 2) + 0xff620000)
#define HCODEC_ANC18_CANVAS_ADDR                   ((0x19a2  << 2) + 0xff620000)
#define HCODEC_ANC19_CANVAS_ADDR                   ((0x19a3  << 2) + 0xff620000)
#define HCODEC_ANC20_CANVAS_ADDR                   ((0x19a4  << 2) + 0xff620000)
#define HCODEC_ANC21_CANVAS_ADDR                   ((0x19a5  << 2) + 0xff620000)
#define HCODEC_ANC22_CANVAS_ADDR                   ((0x19a6  << 2) + 0xff620000)
#define HCODEC_ANC23_CANVAS_ADDR                   ((0x19a7  << 2) + 0xff620000)
#define HCODEC_ANC24_CANVAS_ADDR                   ((0x19a8  << 2) + 0xff620000)
#define HCODEC_ANC25_CANVAS_ADDR                   ((0x19a9  << 2) + 0xff620000)
#define HCODEC_ANC26_CANVAS_ADDR                   ((0x19aa  << 2) + 0xff620000)
#define HCODEC_ANC27_CANVAS_ADDR                   ((0x19ab  << 2) + 0xff620000)
#define HCODEC_ANC28_CANVAS_ADDR                   ((0x19ac  << 2) + 0xff620000)
#define HCODEC_ANC29_CANVAS_ADDR                   ((0x19ad  << 2) + 0xff620000)
#define HCODEC_ANC30_CANVAS_ADDR                   ((0x19ae  << 2) + 0xff620000)
#define HCODEC_ANC31_CANVAS_ADDR                   ((0x19af  << 2) + 0xff620000)
#define HCODEC_DBKR_CANVAS_ADDR                    ((0x19b0  << 2) + 0xff620000)
#define HCODEC_DBKW_CANVAS_ADDR                    ((0x19b1  << 2) + 0xff620000)
#define HCODEC_REC_CANVAS_ADDR                     ((0x19b2  << 2) + 0xff620000)
//28:24, read/write, current canvas idx, used in h264 only now
//23:0, read only, current canvas address, 23:16, Cr canvas addr, 15:8, Cb canvas addr, 7:0, Y  canvas addr
#define HCODEC_CURR_CANVAS_CTRL                    ((0x19b3  << 2) + 0xff620000)
#define HCODEC_MDEC_PIC_DC_THRESH                  ((0x19b8  << 2) + 0xff620000)
#define HCODEC_MDEC_PICR_BUF_STATUS                ((0x19b9  << 2) + 0xff620000)
#define HCODEC_MDEC_PICW_BUF_STATUS                ((0x19ba  << 2) + 0xff620000)
#define HCODEC_MCW_DBLK_WRRSP_CNT                  ((0x19bb  << 2) + 0xff620000)
#define HCODEC_MC_MBBOT_WRRSP_CNT                  ((0x19bc  << 2) + 0xff620000)
#define HCODEC_MDEC_PICW_BUF2_STATUS               ((0x19bd  << 2) + 0xff620000)
#define HCODEC_WRRSP_FIFO_PICW_DBK                 ((0x19be  << 2) + 0xff620000)
#define HCODEC_WRRSP_FIFO_PICW_MC                  ((0x19bf  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_0                        ((0x19c0  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_1                        ((0x19c1  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_2                        ((0x19c2  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_3                        ((0x19c3  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_4                        ((0x19c4  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_5                        ((0x19c5  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_6                        ((0x19c6  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_7                        ((0x19c7  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_8                        ((0x19c8  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_9                        ((0x19c9  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_A                        ((0x19ca  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_B                        ((0x19cb  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_C                        ((0x19cc  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_D                        ((0x19cd  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_E                        ((0x19ce  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_F                        ((0x19cf  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_G                        ((0x19d0  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_H                        ((0x19d1  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_I                        ((0x19d2  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_J                        ((0x19d3  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_K                        ((0x19d4  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_L                        ((0x19d5  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_M                        ((0x19d6  << 2) + 0xff620000)
#define HCODEC_AV_SCRATCH_N                        ((0x19d7  << 2) + 0xff620000)
// bit[29:24] A_brst_num_co_mb
// bit[21:16] A_id_co_mb
// bit[11:0] wrrsp_count_co_mb
#define HCODEC_WRRSP_CO_MB                         ((0x19d8  << 2) + 0xff620000)
// bit[29:24] A_brst_num_dcac
// bit[21:16] A_id_dcac
// bit[11:0] wrrsp_count_dcac
#define HCODEC_WRRSP_DCAC                          ((0x19d9  << 2) + 0xff620000)
// bit[11:0] wrrsp_count_vld
#define HCODEC_WRRSP_VLD                           ((0x19da  << 2) + 0xff620000)
// doublew_cfg0[0];     //       Second Channel Enable, 1:Enable 0:Disable
// doublew_cfg0[3:1];   // [2:0] Endian Control for Luma
// doublew_cfg0[5:4];   // [1:0] Pixel sel by horizontal, 0x:1/2 10:left 11:right
// doublew_cfg0[7:6];   // [1:0] Pixel sel by vertical,   0x:1/2 10:up 11:down
// doublew_cfg0[8];     //       Size by horizontal, 0:original size 1: 1/2 shrunken size
// doublew_cfg0[9];     //       Size by vertical,   0:original size 1: 1/2 shrunken size
// doublew_cfg0[10];    //       1:Round 0:Truncation
// doublew_cfg0[11];    //       DMA Urgent
// doublew_cfg0[17:12]; // [5:0] DMA Burst Number
// doublew_cfg0[23:18]; // [5:0] DMA ID
// doublew_cfg0[26:24]; // [2:0] Endian Control for Chroma
// doublew_cfg0[27];    //       Source from, 1:MCW 0:DBLK
// doublew_cfg0[29:28]; // [1:0] 0x:select both top and bottom 10:select top 11:select bottom
// doublew_cfg0[30];    //       0:no merge 1:automatic merge
// doublew_cfg0[31];    //       0:Y addr no change 1:Y addr divided to half
#define HCODEC_MDEC_DOUBLEW_CFG0                   ((0x19db  << 2) + 0xff620000)
// doublew_cfg1[7:0];   // [7:0] DMA Canvas Address for Luma
// doublew_cfg1[15:8];  // [7:0] DMA Canvas Address for Chroma
// doublew_cfg1[16];    //       Disable 1st Write -
// doublew_cfg1[17];    //       Reverse to original version -
// doublew_cfg1[18];    //       DMA Address Mode - 0:Canvas Mode 1:Non-Canvas Mode
#define HCODEC_MDEC_DOUBLEW_CFG1                   ((0x19dc  << 2) + 0xff620000)
// doublew_cfg2[11:0];  //[11:0] vertical flip initial value
// doublew_cfg2[15];    //       vertical flip enable
// doublew_cfg2[24:16]; // [8:0] horizontal flip initial value
// doublew_cfg2[31];    //       horizontal flip enable
#define HCODEC_MDEC_DOUBLEW_CFG2                   ((0x19dd  << 2) + 0xff620000)
// doublew_cfg3[31:0];  //[31:0] non-canvas start address for Luma -
#define HCODEC_MDEC_DOUBLEW_CFG3                   ((0x19de  << 2) + 0xff620000)
// doublew_cfg4[31:0];  //[31:0] non-canvas start address for Chroma -
#define HCODEC_MDEC_DOUBLEW_CFG4                   ((0x19df  << 2) + 0xff620000)
// doublew_cfg5[12:0];  //[12:0] non-canvas picture width for Luma -
// doublew_cfg5[28:16]; //[12:0] non-canvas picture width for Chroma -
#define HCODEC_MDEC_DOUBLEW_CFG5                   ((0x19e0  << 2) + 0xff620000)
// doublew_cfg6: reserved
#define HCODEC_MDEC_DOUBLEW_CFG6                   ((0x19e1  << 2) + 0xff620000)
// doublew_cfg7: reserved
#define HCODEC_MDEC_DOUBLEW_CFG7                   ((0x19e2  << 2) + 0xff620000)
// doublew_status[11:0];//[11:0] wrrsp_count_doublew
// doublew_status[12];  //       doublew_status_busy
// doublew_status[13];  //       doublew_status_error
#define HCODEC_MDEC_DOUBLEW_STATUS                 ((0x19e3  << 2) + 0xff620000)
#define HCODEC_MDEC_EXTIF_CFG0                     ((0x19e4  << 2) + 0xff620000)
#define HCODEC_MDEC_EXTIF_CFG1                     ((0x19e5  << 2) + 0xff620000)
#define HCODEC_MDEC_EXTIF_STS0                     ((0x19e6  << 2) + 0xff620000)
//======================================
//  MC Control Register Bits
//
//======================================
// For bits, just copy the defines...don't translate to addresses
    //`define MC_RESET	    16'h0002
//======================================
//  MB Info Register Bits
//
//======================================
//======================================
//  MB Info Register Bits
//
//======================================
//========================================================================
// DBLK Register:  12'h950 - 12'h97f
//========================================================================
#define HCODEC_DBLK_RST                            ((0x1950  << 2) + 0xff620000)
#define HCODEC_DBLK_CTRL                           ((0x1951  << 2) + 0xff620000)
#define HCODEC_DBLK_MB_WID_HEIGHT                  ((0x1952  << 2) + 0xff620000)
#define HCODEC_DBLK_STATUS                         ((0x1953  << 2) + 0xff620000)
#define HCODEC_DBLK_CMD_CTRL                       ((0x1954  << 2) + 0xff620000)
#define HCODEC_DBLK_MB_XY                          ((0x1955  << 2) + 0xff620000)
#define HCODEC_DBLK_QP                             ((0x1956  << 2) + 0xff620000)
#define HCODEC_DBLK_Y_BHFILT                       ((0x1957  << 2) + 0xff620000)
#define HCODEC_DBLK_Y_BHFILT_HIGH                  ((0x1958  << 2) + 0xff620000)
#define HCODEC_DBLK_Y_BVFILT                       ((0x1959  << 2) + 0xff620000)
#define HCODEC_DBLK_CB_BFILT                       ((0x195a  << 2) + 0xff620000)
#define HCODEC_DBLK_CR_BFILT                       ((0x195b  << 2) + 0xff620000)
#define HCODEC_DBLK_Y_HFILT                        ((0x195c  << 2) + 0xff620000)
#define HCODEC_DBLK_Y_HFILT_HIGH                   ((0x195d  << 2) + 0xff620000)
#define HCODEC_DBLK_Y_VFILT                        ((0x195e  << 2) + 0xff620000)
#define HCODEC_DBLK_CB_FILT                        ((0x195f  << 2) + 0xff620000)
#define HCODEC_DBLK_CR_FILT                        ((0x1960  << 2) + 0xff620000)
#define HCODEC_DBLK_BETAX_QP_SEL                   ((0x1961  << 2) + 0xff620000)
#define HCODEC_DBLK_CLIP_CTRL0                     ((0x1962  << 2) + 0xff620000)
#define HCODEC_DBLK_CLIP_CTRL1                     ((0x1963  << 2) + 0xff620000)
#define HCODEC_DBLK_CLIP_CTRL2                     ((0x1964  << 2) + 0xff620000)
#define HCODEC_DBLK_CLIP_CTRL3                     ((0x1965  << 2) + 0xff620000)
#define HCODEC_DBLK_CLIP_CTRL4                     ((0x1966  << 2) + 0xff620000)
#define HCODEC_DBLK_CLIP_CTRL5                     ((0x1967  << 2) + 0xff620000)
#define HCODEC_DBLK_CLIP_CTRL6                     ((0x1968  << 2) + 0xff620000)
#define HCODEC_DBLK_CLIP_CTRL7                     ((0x1969  << 2) + 0xff620000)
#define HCODEC_DBLK_CLIP_CTRL8                     ((0x196a  << 2) + 0xff620000)
#define HCODEC_DBLK_STATUS1                        ((0x196b  << 2) + 0xff620000)
#define HCODEC_DBLK_GCLK_FREE                      ((0x196c  << 2) + 0xff620000)
#define HCODEC_DBLK_GCLK_OFF                       ((0x196d  << 2) + 0xff620000)
#define HCODEC_DBLK_AVSFLAGS                       ((0x196e  << 2) + 0xff620000)
// bit 15:0
#define HCODEC_DBLK_CBPY                           ((0x1970  << 2) + 0xff620000)
// bit 11:8 -- deblk_cbpy_bottom
// bit 7:4 -- deblk_cbpy_left
// bit 3:0 -- deblk_cbpy_top
#define HCODEC_DBLK_CBPY_ADJ                       ((0x1971  << 2) + 0xff620000)
// bit 7:0 -- deblk_cbpc
#define HCODEC_DBLK_CBPC                           ((0x1972  << 2) + 0xff620000)
// bit 15 -- bottom_mb
// bit 14 -- left_mb
// bit 13 -- top_mb
// bit 12 -- reserved
// bit 11:8 -- deblk_cbpc_bottom
// bit 7:4 -- deblk_cbpc_left
// bit 3:0 -- deblk_cbpc_top
#define HCODEC_DBLK_CBPC_ADJ                       ((0x1973  << 2) + 0xff620000)
// bit 15:8 -- deblk_hmvd   -- {left_1, left_0, below_1, below_0, block3-0}
// bit 7:0 -- deblk_vmvd    -- {top_1, top_0, below_1, below_0, block3-0}
#define HCODEC_DBLK_VHMVD                          ((0x1974  << 2) + 0xff620000)
// bit 13:12 -- right_vmvd
// bit 11 -- right_above_vmvd
// bit 10 -- left_below_hmvd
// bit 9 -- disable_dblk_luma
// bit 8 -- disable_dblk_chroma
// bit 7 -- bBelowRefDiff
// bit 6 -- bLeftRefDiff
// bit 5 -- bAboveRefDiff
// bit 4 -- reserved
// bit 3 -- s_below
// bit 2 -- s_left
// bit 1 -- s_above
// bit 0 -- s
#define HCODEC_DBLK_STRONG                         ((0x1975  << 2) + 0xff620000)
// bit 14:10 -- PQUANT
// bit 9:5 -- left_PQUANT
// bit 4:0 -- top_PQUANT
#define HCODEC_DBLK_RV8_QUANT                      ((0x1976  << 2) + 0xff620000)
#define HCODEC_DBLK_CBUS_HCMD2                     ((0x1977  << 2) + 0xff620000)
#define HCODEC_DBLK_CBUS_HCMD1                     ((0x1978  << 2) + 0xff620000)
#define HCODEC_DBLK_CBUS_HCMD0                     ((0x1979  << 2) + 0xff620000)
#define HCODEC_DBLK_VLD_HCMD2                      ((0x197a  << 2) + 0xff620000)
#define HCODEC_DBLK_VLD_HCMD1                      ((0x197b  << 2) + 0xff620000)
#define HCODEC_DBLK_VLD_HCMD0                      ((0x197c  << 2) + 0xff620000)
#define HCODEC_DBLK_OST_YBASE                      ((0x197d  << 2) + 0xff620000)
#define HCODEC_DBLK_OST_CBCRDIFF                   ((0x197e  << 2) + 0xff620000)
//13:8 dblk thread ID and token
//5:0  dblk prearbitor burst num
#define HCODEC_DBLK_CTRL1                          ((0x197f  << 2) + 0xff620000)
// MCRCC_CTL1
// 31:3  <reserved[23:0]>
// 2     <cfg_field_pic>
// 1     <sw_rst>
// 0     <bypass_en>
#define HCODEC_MCRCC_CTL1                          ((0x1980  << 2) + 0xff620000)
// MCRCC_CTL2
// 31:24    <cfg_cache_anc01_c[7:0]>
// 23:16    <cfg_cache_anc01_y[7:0]>
// 15:8     <cfg_cache_anc00_c[7:0]>
// 7:0      <cfg_cache_anc00_y[7:0]>
#define HCODEC_MCRCC_CTL2                          ((0x1981  << 2) + 0xff620000)
// MCRCC_CTL3
// 31:24    <cfg_cache_anc11_c[7:0]>
// 23:16    <cfg_cache_anc11_y[7:0]>
// 15:8     <cfg_cache_anc10_c[7:0]>
// 7:0      <cfg_cache_anc10_y[7:0]>
#define HCODEC_MCRCC_CTL3                          ((0x1982  << 2) + 0xff620000)
// bit[31:10] reserved
// bit[9:0] sw_clock_gating control
// [9] vdec clk_en for assist and cbus.
// [8] vdec clk_en for ddr
// [7] vdec clk_en for vcpu
// [6] vdec clk_en for assist
// [5] vdec clk_en for dblk
// [4] vdec clk_en for iqidct
// [3] vdec clk_en for mc
// [2] vdec clk_en for pic_dc
// [1] vdec clk_en for psc
// [0] vdec clk_en for vld
#define HCODEC_GCLK_EN                             ((0x1983  << 2) + 0xff620000)
// [0]  Reserved
// [1]  Reserved
// [2]  Reset assist, mdec's CBUS
// [3]  Reset mdec's VLD
// [4]  Reset mdec's VLD
// [5]  Reset mdec's VLD
// [6]  Reset mdec's IQIDCT
// [7]  Reset mdec's MC
// [8]  Reset mdec's DBLK
// [9]  Reset mdec's PIC_DC
// [10] Reset mdec's Pscale
// [11] Reset vcpu's MCPU
// [12] Reset vcpu's CCPU
// [13] Reset mmc_pre_arb
#define HCODEC_MDEC_SW_RESET                       ((0x1984  << 2) + 0xff620000)
//DBLK last address 12'h97f
//
// Closing file:  mdec_regs.h
//
//
// Reading file:  mdec_regs.h
//
//========================================================================
//  MDEC module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_VDEC_MDEC_CBUS_BASE = 0x09
// -----------------------------------------------
#define VDEC2_MC_CTRL_REG                          ((0x2900  << 2) + 0xff620000)
#define VDEC2_MC_MB_INFO                           ((0x2901  << 2) + 0xff620000)
#define VDEC2_MC_PIC_INFO                          ((0x2902  << 2) + 0xff620000)
#define VDEC2_MC_HALF_PEL_ONE                      ((0x2903  << 2) + 0xff620000)
#define VDEC2_MC_HALF_PEL_TWO                      ((0x2904  << 2) + 0xff620000)
#define VDEC2_POWER_CTL_MC                         ((0x2905  << 2) + 0xff620000)
#define VDEC2_MC_CMD                               ((0x2906  << 2) + 0xff620000)
#define VDEC2_MC_CTRL0                             ((0x2907  << 2) + 0xff620000)
#define VDEC2_MC_PIC_W_H                           ((0x2908  << 2) + 0xff620000)
#define VDEC2_MC_STATUS0                           ((0x2909  << 2) + 0xff620000)
#define VDEC2_MC_STATUS1                           ((0x290a  << 2) + 0xff620000)
#define VDEC2_MC_CTRL1                             ((0x290b  << 2) + 0xff620000)
#define VDEC2_MC_MIX_RATIO0                        ((0x290c  << 2) + 0xff620000)
#define VDEC2_MC_MIX_RATIO1                        ((0x290d  << 2) + 0xff620000)
#define VDEC2_MC_DP_MB_XY                          ((0x290e  << 2) + 0xff620000)
#define VDEC2_MC_OM_MB_XY                          ((0x290f  << 2) + 0xff620000)
#define VDEC2_PSCALE_RST                           ((0x2910  << 2) + 0xff620000)
#define VDEC2_PSCALE_CTRL                          ((0x2911  << 2) + 0xff620000)
#define VDEC2_PSCALE_PICI_W                        ((0x2912  << 2) + 0xff620000)
#define VDEC2_PSCALE_PICI_H                        ((0x2913  << 2) + 0xff620000)
#define VDEC2_PSCALE_PICO_W                        ((0x2914  << 2) + 0xff620000)
#define VDEC2_PSCALE_PICO_H                        ((0x2915  << 2) + 0xff620000)
#define VDEC2_PSCALE_PICO_START_X                  ((0x2916  << 2) + 0xff620000)
#define VDEC2_PSCALE_PICO_START_Y                  ((0x2917  << 2) + 0xff620000)
#define VDEC2_PSCALE_DUMMY                         ((0x2918  << 2) + 0xff620000)
#define VDEC2_PSCALE_FILT0_COEF0                   ((0x2919  << 2) + 0xff620000)
#define VDEC2_PSCALE_FILT0_COEF1                   ((0x291a  << 2) + 0xff620000)
#define VDEC2_PSCALE_CMD_CTRL                      ((0x291b  << 2) + 0xff620000)
#define VDEC2_PSCALE_CMD_BLK_X                     ((0x291c  << 2) + 0xff620000)
#define VDEC2_PSCALE_CMD_BLK_Y                     ((0x291d  << 2) + 0xff620000)
#define VDEC2_PSCALE_STATUS                        ((0x291e  << 2) + 0xff620000)
#define VDEC2_PSCALE_BMEM_ADDR                     ((0x291f  << 2) + 0xff620000)
#define VDEC2_PSCALE_BMEM_DAT                      ((0x2920  << 2) + 0xff620000)
#define VDEC2_PSCALE_DRAM_BUF_CTRL                 ((0x2921  << 2) + 0xff620000)
#define VDEC2_PSCALE_MCMD_CTRL                     ((0x2922  << 2) + 0xff620000)
#define VDEC2_PSCALE_MCMD_XSIZE                    ((0x2923  << 2) + 0xff620000)
#define VDEC2_PSCALE_MCMD_YSIZE                    ((0x2924  << 2) + 0xff620000)
#define VDEC2_PSCALE_RBUF_START_BLKX               ((0x2925  << 2) + 0xff620000)
#define VDEC2_PSCALE_RBUF_START_BLKY               ((0x2926  << 2) + 0xff620000)
//`define PSCALE_RBUF_MB_WIDTH   8'h27
#define VDEC2_PSCALE_PICO_SHIFT_XY                 ((0x2928  << 2) + 0xff620000)
#define VDEC2_PSCALE_CTRL1                         ((0x2929  << 2) + 0xff620000)
//Bit 15, wmask enable
//Bit 14:13, filt0 srckey_less,
//Bit 12:11, filt1 srckey_less, in the case of the interpolated data is equal distance to
//key data and normal data, 00: select normal data, 01: select right data, 10: select key data
//Bit 10:9, srckey mode, 00: equal, 01: less than or equal, 10: great than or equal
//Bit 8, src key enable
//Bit 7:0, y src key
#define VDEC2_PSCALE_SRCKEY_CTRL0                  ((0x292a  << 2) + 0xff620000)
//Bit 15:8, cb src key
//Bit 7:0, cr src key
#define VDEC2_PSCALE_SRCKEY_CTRL1                  ((0x292b  << 2) + 0xff620000)
//Bit 22:16 canvas_rd_addr2
//Bit 14:8 canvas_rd_addr1
//Bit 6:0 canvas_rd_addr1
#define VDEC2_PSCALE_CANVAS_RD_ADDR                ((0x292c  << 2) + 0xff620000)
//Bit 22:16 canvas_wr_addr2
//Bit 14:8 canvas_wr_addr1
//Bit 6:0 canvas_wr_addr1
#define VDEC2_PSCALE_CANVAS_WR_ADDR                ((0x292d  << 2) + 0xff620000)
//bit 13:8 pscale thread ID and token
//bit 7 disable write response count adding to busy bit
//bit 5:0  pscale prearbitor burst num
#define VDEC2_PSCALE_CTRL2                         ((0x292e  << 2) + 0xff620000)
//   31 - use_omem_mb_xy_auto
//23:16 - omem_max_mb_x
//15:8  - omem_mb_y_auto
// 7:0  - omem_mb_x_auto
#define VDEC2_HDEC_MC_OMEM_AUTO                    ((0x2930  << 2) + 0xff620000)
#define VDEC2_HDEC_MC_MBRIGHT_IDX                  ((0x2931  << 2) + 0xff620000)
#define VDEC2_HDEC_MC_MBRIGHT_RD                   ((0x2932  << 2) + 0xff620000)
#define VDEC2_MC_MPORT_CTRL                        ((0x2940  << 2) + 0xff620000)
#define VDEC2_MC_MPORT_DAT                         ((0x2941  << 2) + 0xff620000)
#define VDEC2_MC_WT_PRED_CTRL                      ((0x2942  << 2) + 0xff620000)
#define VDEC2_MC_MBBOT_ST_EVEN_ADDR                ((0x2944  << 2) + 0xff620000)
#define VDEC2_MC_MBBOT_ST_ODD_ADDR                 ((0x2945  << 2) + 0xff620000)
#define VDEC2_MC_DPDN_MB_XY                        ((0x2946  << 2) + 0xff620000)
#define VDEC2_MC_OMDN_MB_XY                        ((0x2947  << 2) + 0xff620000)
#define VDEC2_MC_HCMDBUF_H                         ((0x2948  << 2) + 0xff620000)
#define VDEC2_MC_HCMDBUF_L                         ((0x2949  << 2) + 0xff620000)
#define VDEC2_MC_HCMD_H                            ((0x294a  << 2) + 0xff620000)
#define VDEC2_MC_HCMD_L                            ((0x294b  << 2) + 0xff620000)
#define VDEC2_MC_IDCT_DAT                          ((0x294c  << 2) + 0xff620000)
#define VDEC2_MC_CTRL_GCLK_CTRL                    ((0x294d  << 2) + 0xff620000)
#define VDEC2_MC_OTHER_GCLK_CTRL                   ((0x294e  << 2) + 0xff620000)
//Bit 29:24, mbbot thread ID and token
//Bit 21:16, mc read/write thread ID and token
//Bit 13:8,  mbbot pre-arbitor burst number
//Bit 5:0,   mc pre-arbitor burst number
#define VDEC2_MC_CTRL2                             ((0x294f  << 2) + 0xff620000)
// `define DBLK_QUANT            8'h76 // ONLY for $ucode/real/amrisc/rv.s, reg value from apollo
//`define ANC1_CANVAS_ADDR      8'h80
//`define ANC2_CANVAS_ADDR      8'h81
//`define REC_CANVAS_ADDR       8'h89
//`define MDEC_PIC_W          8'h8c
//`define MDEC_PIC_H          8'h8d
// mdec_pic_dc_mux_ctrl[31]  -- mcr_hevc_mode
#define VDEC2_MDEC_PIC_DC_MUX_CTRL                 ((0x298d  << 2) + 0xff620000)
#define VDEC2_MDEC_PIC_DC_CTRL                     ((0x298e  << 2) + 0xff620000)
#define VDEC2_MDEC_PIC_DC_STATUS                   ((0x298f  << 2) + 0xff620000)
#define VDEC2_ANC0_CANVAS_ADDR                     ((0x2990  << 2) + 0xff620000)
#define VDEC2_ANC1_CANVAS_ADDR                     ((0x2991  << 2) + 0xff620000)
#define VDEC2_ANC2_CANVAS_ADDR                     ((0x2992  << 2) + 0xff620000)
#define VDEC2_ANC3_CANVAS_ADDR                     ((0x2993  << 2) + 0xff620000)
#define VDEC2_ANC4_CANVAS_ADDR                     ((0x2994  << 2) + 0xff620000)
#define VDEC2_ANC5_CANVAS_ADDR                     ((0x2995  << 2) + 0xff620000)
#define VDEC2_ANC6_CANVAS_ADDR                     ((0x2996  << 2) + 0xff620000)
#define VDEC2_ANC7_CANVAS_ADDR                     ((0x2997  << 2) + 0xff620000)
#define VDEC2_ANC8_CANVAS_ADDR                     ((0x2998  << 2) + 0xff620000)
#define VDEC2_ANC9_CANVAS_ADDR                     ((0x2999  << 2) + 0xff620000)
#define VDEC2_ANC10_CANVAS_ADDR                    ((0x299a  << 2) + 0xff620000)
#define VDEC2_ANC11_CANVAS_ADDR                    ((0x299b  << 2) + 0xff620000)
#define VDEC2_ANC12_CANVAS_ADDR                    ((0x299c  << 2) + 0xff620000)
#define VDEC2_ANC13_CANVAS_ADDR                    ((0x299d  << 2) + 0xff620000)
#define VDEC2_ANC14_CANVAS_ADDR                    ((0x299e  << 2) + 0xff620000)
#define VDEC2_ANC15_CANVAS_ADDR                    ((0x299f  << 2) + 0xff620000)
#define VDEC2_ANC16_CANVAS_ADDR                    ((0x29a0  << 2) + 0xff620000)
#define VDEC2_ANC17_CANVAS_ADDR                    ((0x29a1  << 2) + 0xff620000)
#define VDEC2_ANC18_CANVAS_ADDR                    ((0x29a2  << 2) + 0xff620000)
#define VDEC2_ANC19_CANVAS_ADDR                    ((0x29a3  << 2) + 0xff620000)
#define VDEC2_ANC20_CANVAS_ADDR                    ((0x29a4  << 2) + 0xff620000)
#define VDEC2_ANC21_CANVAS_ADDR                    ((0x29a5  << 2) + 0xff620000)
#define VDEC2_ANC22_CANVAS_ADDR                    ((0x29a6  << 2) + 0xff620000)
#define VDEC2_ANC23_CANVAS_ADDR                    ((0x29a7  << 2) + 0xff620000)
#define VDEC2_ANC24_CANVAS_ADDR                    ((0x29a8  << 2) + 0xff620000)
#define VDEC2_ANC25_CANVAS_ADDR                    ((0x29a9  << 2) + 0xff620000)
#define VDEC2_ANC26_CANVAS_ADDR                    ((0x29aa  << 2) + 0xff620000)
#define VDEC2_ANC27_CANVAS_ADDR                    ((0x29ab  << 2) + 0xff620000)
#define VDEC2_ANC28_CANVAS_ADDR                    ((0x29ac  << 2) + 0xff620000)
#define VDEC2_ANC29_CANVAS_ADDR                    ((0x29ad  << 2) + 0xff620000)
#define VDEC2_ANC30_CANVAS_ADDR                    ((0x29ae  << 2) + 0xff620000)
#define VDEC2_ANC31_CANVAS_ADDR                    ((0x29af  << 2) + 0xff620000)
#define VDEC2_DBKR_CANVAS_ADDR                     ((0x29b0  << 2) + 0xff620000)
#define VDEC2_DBKW_CANVAS_ADDR                     ((0x29b1  << 2) + 0xff620000)
#define VDEC2_REC_CANVAS_ADDR                      ((0x29b2  << 2) + 0xff620000)
//28:24, read/write, current canvas idx, used in h264 only now
//23:0, read only, current canvas address, 23:16, Cr canvas addr, 15:8, Cb canvas addr, 7:0, Y  canvas addr
#define VDEC2_CURR_CANVAS_CTRL                     ((0x29b3  << 2) + 0xff620000)
#define VDEC2_MDEC_PIC_DC_THRESH                   ((0x29b8  << 2) + 0xff620000)
#define VDEC2_MDEC_PICR_BUF_STATUS                 ((0x29b9  << 2) + 0xff620000)
#define VDEC2_MDEC_PICW_BUF_STATUS                 ((0x29ba  << 2) + 0xff620000)
#define VDEC2_MCW_DBLK_WRRSP_CNT                   ((0x29bb  << 2) + 0xff620000)
#define VDEC2_MC_MBBOT_WRRSP_CNT                   ((0x29bc  << 2) + 0xff620000)
#define VDEC2_MDEC_PICW_BUF2_STATUS                ((0x29bd  << 2) + 0xff620000)
#define VDEC2_WRRSP_FIFO_PICW_DBK                  ((0x29be  << 2) + 0xff620000)
#define VDEC2_WRRSP_FIFO_PICW_MC                   ((0x29bf  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_0                         ((0x29c0  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_1                         ((0x29c1  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_2                         ((0x29c2  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_3                         ((0x29c3  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_4                         ((0x29c4  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_5                         ((0x29c5  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_6                         ((0x29c6  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_7                         ((0x29c7  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_8                         ((0x29c8  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_9                         ((0x29c9  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_A                         ((0x29ca  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_B                         ((0x29cb  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_C                         ((0x29cc  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_D                         ((0x29cd  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_E                         ((0x29ce  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_F                         ((0x29cf  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_G                         ((0x29d0  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_H                         ((0x29d1  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_I                         ((0x29d2  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_J                         ((0x29d3  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_K                         ((0x29d4  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_L                         ((0x29d5  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_M                         ((0x29d6  << 2) + 0xff620000)
#define VDEC2_AV_SCRATCH_N                         ((0x29d7  << 2) + 0xff620000)
// bit[29:24] A_brst_num_co_mb
// bit[21:16] A_id_co_mb
// bit[11:0] wrrsp_count_co_mb
#define VDEC2_WRRSP_CO_MB                          ((0x29d8  << 2) + 0xff620000)
// bit[29:24] A_brst_num_dcac
// bit[21:16] A_id_dcac
// bit[11:0] wrrsp_count_dcac
#define VDEC2_WRRSP_DCAC                           ((0x29d9  << 2) + 0xff620000)
// bit[11:0] wrrsp_count_vld
#define VDEC2_WRRSP_VLD                            ((0x29da  << 2) + 0xff620000)
// doublew_cfg0[0];     //       Second Channel Enable, 1:Enable 0:Disable
// doublew_cfg0[3:1];   // [2:0] Endian Control for Luma
// doublew_cfg0[5:4];   // [1:0] Pixel sel by horizontal, 0x:1/2 10:left 11:right
// doublew_cfg0[7:6];   // [1:0] Pixel sel by vertical,   0x:1/2 10:up 11:down
// doublew_cfg0[8];     //       Size by horizontal, 0:original size 1: 1/2 shrunken size
// doublew_cfg0[9];     //       Size by vertical,   0:original size 1: 1/2 shrunken size
// doublew_cfg0[10];    //       1:Round 0:Truncation
// doublew_cfg0[11];    //       DMA Urgent
// doublew_cfg0[17:12]; // [5:0] DMA Burst Number
// doublew_cfg0[23:18]; // [5:0] DMA ID
// doublew_cfg0[26:24]; // [2:0] Endian Control for Chroma
// doublew_cfg0[27];    //       Source from, 1:MCW 0:DBLK
// doublew_cfg0[29:28]; // [1:0] 0x:select both top and bottom 10:select top 11:select bottom
// doublew_cfg0[30];    //       0:no merge 1:automatic merge
// doublew_cfg0[31];    //       0:Y addr no change 1:Y addr divided to half
#define VDEC2_MDEC_DOUBLEW_CFG0                    ((0x29db  << 2) + 0xff620000)
// doublew_cfg1[7:0];   // [7:0] DMA Canvas Address for Luma
// doublew_cfg1[15:8];  // [7:0] DMA Canvas Address for Chroma
// doublew_cfg1[16];    //       Disable 1st Write -
// doublew_cfg1[17];    //       Reverse to original version -
// doublew_cfg1[18];    //       DMA Address Mode - 0:Canvas Mode 1:Non-Canvas Mode
#define VDEC2_MDEC_DOUBLEW_CFG1                    ((0x29dc  << 2) + 0xff620000)
// doublew_cfg2[11:0];  //[11:0] vertical flip initial value
// doublew_cfg2[15];    //       vertical flip enable
// doublew_cfg2[24:16]; // [8:0] horizontal flip initial value
// doublew_cfg2[31];    //       horizontal flip enable
#define VDEC2_MDEC_DOUBLEW_CFG2                    ((0x29dd  << 2) + 0xff620000)
// doublew_cfg3[31:0];  //[31:0] non-canvas start address for Luma -
#define VDEC2_MDEC_DOUBLEW_CFG3                    ((0x29de  << 2) + 0xff620000)
// doublew_cfg4[31:0];  //[31:0] non-canvas start address for Chroma -
#define VDEC2_MDEC_DOUBLEW_CFG4                    ((0x29df  << 2) + 0xff620000)
// doublew_cfg5[12:0];  //[12:0] non-canvas picture width for Luma -
// doublew_cfg5[28:16]; //[12:0] non-canvas picture width for Chroma -
#define VDEC2_MDEC_DOUBLEW_CFG5                    ((0x29e0  << 2) + 0xff620000)
// doublew_cfg6: reserved
#define VDEC2_MDEC_DOUBLEW_CFG6                    ((0x29e1  << 2) + 0xff620000)
// doublew_cfg7: reserved
#define VDEC2_MDEC_DOUBLEW_CFG7                    ((0x29e2  << 2) + 0xff620000)
// doublew_status[11:0];//[11:0] wrrsp_count_doublew
// doublew_status[12];  //       doublew_status_busy
// doublew_status[13];  //       doublew_status_error
#define VDEC2_MDEC_DOUBLEW_STATUS                  ((0x29e3  << 2) + 0xff620000)
#define VDEC2_MDEC_EXTIF_CFG0                      ((0x29e4  << 2) + 0xff620000)
#define VDEC2_MDEC_EXTIF_CFG1                      ((0x29e5  << 2) + 0xff620000)
#define VDEC2_MDEC_EXTIF_STS0                      ((0x29e6  << 2) + 0xff620000)
//======================================
//  MC Control Register Bits
//
//======================================
// For bits, just copy the defines...don't translate to addresses
    //`define MC_RESET	    16'h0002
//======================================
//  MB Info Register Bits
//
//======================================
//======================================
//  MB Info Register Bits
//
//======================================
//========================================================================
// DBLK Register:  12'h950 - 12'h97f
//========================================================================
#define VDEC2_DBLK_RST                             ((0x2950  << 2) + 0xff620000)
#define VDEC2_DBLK_CTRL                            ((0x2951  << 2) + 0xff620000)
#define VDEC2_DBLK_MB_WID_HEIGHT                   ((0x2952  << 2) + 0xff620000)
#define VDEC2_DBLK_STATUS                          ((0x2953  << 2) + 0xff620000)
#define VDEC2_DBLK_CMD_CTRL                        ((0x2954  << 2) + 0xff620000)
#define VDEC2_DBLK_MB_XY                           ((0x2955  << 2) + 0xff620000)
#define VDEC2_DBLK_QP                              ((0x2956  << 2) + 0xff620000)
#define VDEC2_DBLK_Y_BHFILT                        ((0x2957  << 2) + 0xff620000)
#define VDEC2_DBLK_Y_BHFILT_HIGH                   ((0x2958  << 2) + 0xff620000)
#define VDEC2_DBLK_Y_BVFILT                        ((0x2959  << 2) + 0xff620000)
#define VDEC2_DBLK_CB_BFILT                        ((0x295a  << 2) + 0xff620000)
#define VDEC2_DBLK_CR_BFILT                        ((0x295b  << 2) + 0xff620000)
#define VDEC2_DBLK_Y_HFILT                         ((0x295c  << 2) + 0xff620000)
#define VDEC2_DBLK_Y_HFILT_HIGH                    ((0x295d  << 2) + 0xff620000)
#define VDEC2_DBLK_Y_VFILT                         ((0x295e  << 2) + 0xff620000)
#define VDEC2_DBLK_CB_FILT                         ((0x295f  << 2) + 0xff620000)
#define VDEC2_DBLK_CR_FILT                         ((0x2960  << 2) + 0xff620000)
#define VDEC2_DBLK_BETAX_QP_SEL                    ((0x2961  << 2) + 0xff620000)
#define VDEC2_DBLK_CLIP_CTRL0                      ((0x2962  << 2) + 0xff620000)
#define VDEC2_DBLK_CLIP_CTRL1                      ((0x2963  << 2) + 0xff620000)
#define VDEC2_DBLK_CLIP_CTRL2                      ((0x2964  << 2) + 0xff620000)
#define VDEC2_DBLK_CLIP_CTRL3                      ((0x2965  << 2) + 0xff620000)
#define VDEC2_DBLK_CLIP_CTRL4                      ((0x2966  << 2) + 0xff620000)
#define VDEC2_DBLK_CLIP_CTRL5                      ((0x2967  << 2) + 0xff620000)
#define VDEC2_DBLK_CLIP_CTRL6                      ((0x2968  << 2) + 0xff620000)
#define VDEC2_DBLK_CLIP_CTRL7                      ((0x2969  << 2) + 0xff620000)
#define VDEC2_DBLK_CLIP_CTRL8                      ((0x296a  << 2) + 0xff620000)
#define VDEC2_DBLK_STATUS1                         ((0x296b  << 2) + 0xff620000)
#define VDEC2_DBLK_GCLK_FREE                       ((0x296c  << 2) + 0xff620000)
#define VDEC2_DBLK_GCLK_OFF                        ((0x296d  << 2) + 0xff620000)
#define VDEC2_DBLK_AVSFLAGS                        ((0x296e  << 2) + 0xff620000)
// bit 15:0
#define VDEC2_DBLK_CBPY                            ((0x2970  << 2) + 0xff620000)
// bit 11:8 -- deblk_cbpy_bottom
// bit 7:4 -- deblk_cbpy_left
// bit 3:0 -- deblk_cbpy_top
#define VDEC2_DBLK_CBPY_ADJ                        ((0x2971  << 2) + 0xff620000)
// bit 7:0 -- deblk_cbpc
#define VDEC2_DBLK_CBPC                            ((0x2972  << 2) + 0xff620000)
// bit 15 -- bottom_mb
// bit 14 -- left_mb
// bit 13 -- top_mb
// bit 12 -- reserved
// bit 11:8 -- deblk_cbpc_bottom
// bit 7:4 -- deblk_cbpc_left
// bit 3:0 -- deblk_cbpc_top
#define VDEC2_DBLK_CBPC_ADJ                        ((0x2973  << 2) + 0xff620000)
// bit 15:8 -- deblk_hmvd   -- {left_1, left_0, below_1, below_0, block3-0}
// bit 7:0 -- deblk_vmvd    -- {top_1, top_0, below_1, below_0, block3-0}
#define VDEC2_DBLK_VHMVD                           ((0x2974  << 2) + 0xff620000)
// bit 13:12 -- right_vmvd
// bit 11 -- right_above_vmvd
// bit 10 -- left_below_hmvd
// bit 9 -- disable_dblk_luma
// bit 8 -- disable_dblk_chroma
// bit 7 -- bBelowRefDiff
// bit 6 -- bLeftRefDiff
// bit 5 -- bAboveRefDiff
// bit 4 -- reserved
// bit 3 -- s_below
// bit 2 -- s_left
// bit 1 -- s_above
// bit 0 -- s
#define VDEC2_DBLK_STRONG                          ((0x2975  << 2) + 0xff620000)
// bit 14:10 -- PQUANT
// bit 9:5 -- left_PQUANT
// bit 4:0 -- top_PQUANT
#define VDEC2_DBLK_RV8_QUANT                       ((0x2976  << 2) + 0xff620000)
#define VDEC2_DBLK_CBUS_HCMD2                      ((0x2977  << 2) + 0xff620000)
#define VDEC2_DBLK_CBUS_HCMD1                      ((0x2978  << 2) + 0xff620000)
#define VDEC2_DBLK_CBUS_HCMD0                      ((0x2979  << 2) + 0xff620000)
#define VDEC2_DBLK_VLD_HCMD2                       ((0x297a  << 2) + 0xff620000)
#define VDEC2_DBLK_VLD_HCMD1                       ((0x297b  << 2) + 0xff620000)
#define VDEC2_DBLK_VLD_HCMD0                       ((0x297c  << 2) + 0xff620000)
#define VDEC2_DBLK_OST_YBASE                       ((0x297d  << 2) + 0xff620000)
#define VDEC2_DBLK_OST_CBCRDIFF                    ((0x297e  << 2) + 0xff620000)
//13:8 dblk thread ID and token
//5:0  dblk prearbitor burst num
#define VDEC2_DBLK_CTRL1                           ((0x297f  << 2) + 0xff620000)
// MCRCC_CTL1
// 31:3  <reserved[23:0]>
// 2     <cfg_field_pic>
// 1     <sw_rst>
// 0     <bypass_en>
#define VDEC2_MCRCC_CTL1                           ((0x2980  << 2) + 0xff620000)
// MCRCC_CTL2
// 31:24    <cfg_cache_anc01_c[7:0]>
// 23:16    <cfg_cache_anc01_y[7:0]>
// 15:8     <cfg_cache_anc00_c[7:0]>
// 7:0      <cfg_cache_anc00_y[7:0]>
#define VDEC2_MCRCC_CTL2                           ((0x2981  << 2) + 0xff620000)
// MCRCC_CTL3
// 31:24    <cfg_cache_anc11_c[7:0]>
// 23:16    <cfg_cache_anc11_y[7:0]>
// 15:8     <cfg_cache_anc10_c[7:0]>
// 7:0      <cfg_cache_anc10_y[7:0]>
#define VDEC2_MCRCC_CTL3                           ((0x2982  << 2) + 0xff620000)
// bit[31:10] reserved
// bit[9:0] sw_clock_gating control
// [9] vdec clk_en for assist and cbus.
// [8] vdec clk_en for ddr
// [7] vdec clk_en for vcpu
// [6] vdec clk_en for assist
// [5] vdec clk_en for dblk
// [4] vdec clk_en for iqidct
// [3] vdec clk_en for mc
// [2] vdec clk_en for pic_dc
// [1] vdec clk_en for psc
// [0] vdec clk_en for vld
#define VDEC2_GCLK_EN                              ((0x2983  << 2) + 0xff620000)
// [0]  Reserved
// [1]  Reserved
// [2]  Reset assist, mdec's CBUS
// [3]  Reset mdec's VLD
// [4]  Reset mdec's VLD
// [5]  Reset mdec's VLD
// [6]  Reset mdec's IQIDCT
// [7]  Reset mdec's MC
// [8]  Reset mdec's DBLK
// [9]  Reset mdec's PIC_DC
// [10] Reset mdec's Pscale
// [11] Reset vcpu's MCPU
// [12] Reset vcpu's CCPU
// [13] Reset mmc_pre_arb
#define VDEC2_MDEC_SW_RESET                        ((0x2984  << 2) + 0xff620000)
//DBLK last address 12'h97f
//
// Closing file:  mdec_regs.h
//
//
// Reading file:  mdec_regs.h
//
//========================================================================
//  MDEC module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_VDEC_MDEC_CBUS_BASE = 0x09
// -----------------------------------------------
#define HEVC_MC_CTRL_REG                           ((0x3900  << 2) + 0xff620000)
#define HEVC_MC_MB_INFO                            ((0x3901  << 2) + 0xff620000)
#define HEVC_MC_PIC_INFO                           ((0x3902  << 2) + 0xff620000)
#define HEVC_MC_HALF_PEL_ONE                       ((0x3903  << 2) + 0xff620000)
#define HEVC_MC_HALF_PEL_TWO                       ((0x3904  << 2) + 0xff620000)
#define HEVC_POWER_CTL_MC                          ((0x3905  << 2) + 0xff620000)
#define HEVC_MC_CMD                                ((0x3906  << 2) + 0xff620000)
#define HEVC_MC_CTRL0                              ((0x3907  << 2) + 0xff620000)
#define HEVC_MC_PIC_W_H                            ((0x3908  << 2) + 0xff620000)
#define HEVC_MC_STATUS0                            ((0x3909  << 2) + 0xff620000)
#define HEVC_MC_STATUS1                            ((0x390a  << 2) + 0xff620000)
#define HEVC_MC_CTRL1                              ((0x390b  << 2) + 0xff620000)
#define HEVC_MC_MIX_RATIO0                         ((0x390c  << 2) + 0xff620000)
#define HEVC_MC_MIX_RATIO1                         ((0x390d  << 2) + 0xff620000)
#define HEVC_MC_DP_MB_XY                           ((0x390e  << 2) + 0xff620000)
#define HEVC_MC_OM_MB_XY                           ((0x390f  << 2) + 0xff620000)
#define HEVC_PSCALE_RST                            ((0x3910  << 2) + 0xff620000)
#define HEVC_PSCALE_CTRL                           ((0x3911  << 2) + 0xff620000)
#define HEVC_PSCALE_PICI_W                         ((0x3912  << 2) + 0xff620000)
#define HEVC_PSCALE_PICI_H                         ((0x3913  << 2) + 0xff620000)
#define HEVC_PSCALE_PICO_W                         ((0x3914  << 2) + 0xff620000)
#define HEVC_PSCALE_PICO_H                         ((0x3915  << 2) + 0xff620000)
#define HEVC_PSCALE_PICO_START_X                   ((0x3916  << 2) + 0xff620000)
#define HEVC_PSCALE_PICO_START_Y                   ((0x3917  << 2) + 0xff620000)
#define HEVC_PSCALE_DUMMY                          ((0x3918  << 2) + 0xff620000)
#define HEVC_PSCALE_FILT0_COEF0                    ((0x3919  << 2) + 0xff620000)
#define HEVC_PSCALE_FILT0_COEF1                    ((0x391a  << 2) + 0xff620000)
#define HEVC_PSCALE_CMD_CTRL                       ((0x391b  << 2) + 0xff620000)
#define HEVC_PSCALE_CMD_BLK_X                      ((0x391c  << 2) + 0xff620000)
#define HEVC_PSCALE_CMD_BLK_Y                      ((0x391d  << 2) + 0xff620000)
#define HEVC_PSCALE_STATUS                         ((0x391e  << 2) + 0xff620000)
#define HEVC_PSCALE_BMEM_ADDR                      ((0x391f  << 2) + 0xff620000)
#define HEVC_PSCALE_BMEM_DAT                       ((0x3920  << 2) + 0xff620000)
#define HEVC_PSCALE_DRAM_BUF_CTRL                  ((0x3921  << 2) + 0xff620000)
#define HEVC_PSCALE_MCMD_CTRL                      ((0x3922  << 2) + 0xff620000)
#define HEVC_PSCALE_MCMD_XSIZE                     ((0x3923  << 2) + 0xff620000)
#define HEVC_PSCALE_MCMD_YSIZE                     ((0x3924  << 2) + 0xff620000)
#define HEVC_PSCALE_RBUF_START_BLKX                ((0x3925  << 2) + 0xff620000)
#define HEVC_PSCALE_RBUF_START_BLKY                ((0x3926  << 2) + 0xff620000)
//`define PSCALE_RBUF_MB_WIDTH   8'h27
#define HEVC_PSCALE_PICO_SHIFT_XY                  ((0x3928  << 2) + 0xff620000)
#define HEVC_PSCALE_CTRL1                          ((0x3929  << 2) + 0xff620000)
//Bit 15, wmask enable
//Bit 14:13, filt0 srckey_less,
//Bit 12:11, filt1 srckey_less, in the case of the interpolated data is equal distance to
//key data and normal data, 00: select normal data, 01: select right data, 10: select key data
//Bit 10:9, srckey mode, 00: equal, 01: less than or equal, 10: great than or equal
//Bit 8, src key enable
//Bit 7:0, y src key
#define HEVC_PSCALE_SRCKEY_CTRL0                   ((0x392a  << 2) + 0xff620000)
//Bit 15:8, cb src key
//Bit 7:0, cr src key
#define HEVC_PSCALE_SRCKEY_CTRL1                   ((0x392b  << 2) + 0xff620000)
//Bit 22:16 canvas_rd_addr2
//Bit 14:8 canvas_rd_addr1
//Bit 6:0 canvas_rd_addr1
#define HEVC_PSCALE_CANVAS_RD_ADDR                 ((0x392c  << 2) + 0xff620000)
//Bit 22:16 canvas_wr_addr2
//Bit 14:8 canvas_wr_addr1
//Bit 6:0 canvas_wr_addr1
#define HEVC_PSCALE_CANVAS_WR_ADDR                 ((0x392d  << 2) + 0xff620000)
//bit 13:8 pscale thread ID and token
//bit 7 disable write response count adding to busy bit
//bit 5:0  pscale prearbitor burst num
#define HEVC_PSCALE_CTRL2                          ((0x392e  << 2) + 0xff620000)
//   31 - use_omem_mb_xy_auto
//23:16 - omem_max_mb_x
//15:8  - omem_mb_y_auto
// 7:0  - omem_mb_x_auto
#define HEVC_HDEC_MC_OMEM_AUTO                     ((0x3930  << 2) + 0xff620000)
#define HEVC_HDEC_MC_MBRIGHT_IDX                   ((0x3931  << 2) + 0xff620000)
#define HEVC_HDEC_MC_MBRIGHT_RD                    ((0x3932  << 2) + 0xff620000)
#define HEVC_MC_MPORT_CTRL                         ((0x3940  << 2) + 0xff620000)
#define HEVC_MC_MPORT_DAT                          ((0x3941  << 2) + 0xff620000)
#define HEVC_MC_WT_PRED_CTRL                       ((0x3942  << 2) + 0xff620000)
#define HEVC_MC_MBBOT_ST_EVEN_ADDR                 ((0x3944  << 2) + 0xff620000)
#define HEVC_MC_MBBOT_ST_ODD_ADDR                  ((0x3945  << 2) + 0xff620000)
#define HEVC_MC_DPDN_MB_XY                         ((0x3946  << 2) + 0xff620000)
#define HEVC_MC_OMDN_MB_XY                         ((0x3947  << 2) + 0xff620000)
#define HEVC_MC_HCMDBUF_H                          ((0x3948  << 2) + 0xff620000)
#define HEVC_MC_HCMDBUF_L                          ((0x3949  << 2) + 0xff620000)
#define HEVC_MC_HCMD_H                             ((0x394a  << 2) + 0xff620000)
#define HEVC_MC_HCMD_L                             ((0x394b  << 2) + 0xff620000)
#define HEVC_MC_IDCT_DAT                           ((0x394c  << 2) + 0xff620000)
#define HEVC_MC_CTRL_GCLK_CTRL                     ((0x394d  << 2) + 0xff620000)
#define HEVC_MC_OTHER_GCLK_CTRL                    ((0x394e  << 2) + 0xff620000)
//Bit 29:24, mbbot thread ID and token
//Bit 21:16, mc read/write thread ID and token
//Bit 13:8,  mbbot pre-arbitor burst number
//Bit 5:0,   mc pre-arbitor burst number
#define HEVC_MC_CTRL2                              ((0x394f  << 2) + 0xff620000)
// `define DBLK_QUANT            8'h76 // ONLY for $ucode/real/amrisc/rv.s, reg value from apollo
//`define ANC1_CANVAS_ADDR      8'h80
//`define ANC2_CANVAS_ADDR      8'h81
//`define REC_CANVAS_ADDR       8'h89
//`define MDEC_PIC_W          8'h8c
//`define MDEC_PIC_H          8'h8d
// mdec_pic_dc_mux_ctrl[31]  -- mcr_hevc_mode
#define HEVC_MDEC_PIC_DC_MUX_CTRL                  ((0x398d  << 2) + 0xff620000)
#define HEVC_MDEC_PIC_DC_CTRL                      ((0x398e  << 2) + 0xff620000)
#define HEVC_MDEC_PIC_DC_STATUS                    ((0x398f  << 2) + 0xff620000)
#define HEVC_ANC0_CANVAS_ADDR                      ((0x3990  << 2) + 0xff620000)
#define HEVC_ANC1_CANVAS_ADDR                      ((0x3991  << 2) + 0xff620000)
#define HEVC_ANC2_CANVAS_ADDR                      ((0x3992  << 2) + 0xff620000)
#define HEVC_ANC3_CANVAS_ADDR                      ((0x3993  << 2) + 0xff620000)
#define HEVC_ANC4_CANVAS_ADDR                      ((0x3994  << 2) + 0xff620000)
#define HEVC_ANC5_CANVAS_ADDR                      ((0x3995  << 2) + 0xff620000)
#define HEVC_ANC6_CANVAS_ADDR                      ((0x3996  << 2) + 0xff620000)
#define HEVC_ANC7_CANVAS_ADDR                      ((0x3997  << 2) + 0xff620000)
#define HEVC_ANC8_CANVAS_ADDR                      ((0x3998  << 2) + 0xff620000)
#define HEVC_ANC9_CANVAS_ADDR                      ((0x3999  << 2) + 0xff620000)
#define HEVC_ANC10_CANVAS_ADDR                     ((0x399a  << 2) + 0xff620000)
#define HEVC_ANC11_CANVAS_ADDR                     ((0x399b  << 2) + 0xff620000)
#define HEVC_ANC12_CANVAS_ADDR                     ((0x399c  << 2) + 0xff620000)
#define HEVC_ANC13_CANVAS_ADDR                     ((0x399d  << 2) + 0xff620000)
#define HEVC_ANC14_CANVAS_ADDR                     ((0x399e  << 2) + 0xff620000)
#define HEVC_ANC15_CANVAS_ADDR                     ((0x399f  << 2) + 0xff620000)
#define HEVC_ANC16_CANVAS_ADDR                     ((0x39a0  << 2) + 0xff620000)
#define HEVC_ANC17_CANVAS_ADDR                     ((0x39a1  << 2) + 0xff620000)
#define HEVC_ANC18_CANVAS_ADDR                     ((0x39a2  << 2) + 0xff620000)
#define HEVC_ANC19_CANVAS_ADDR                     ((0x39a3  << 2) + 0xff620000)
#define HEVC_ANC20_CANVAS_ADDR                     ((0x39a4  << 2) + 0xff620000)
#define HEVC_ANC21_CANVAS_ADDR                     ((0x39a5  << 2) + 0xff620000)
#define HEVC_ANC22_CANVAS_ADDR                     ((0x39a6  << 2) + 0xff620000)
#define HEVC_ANC23_CANVAS_ADDR                     ((0x39a7  << 2) + 0xff620000)
#define HEVC_ANC24_CANVAS_ADDR                     ((0x39a8  << 2) + 0xff620000)
#define HEVC_ANC25_CANVAS_ADDR                     ((0x39a9  << 2) + 0xff620000)
#define HEVC_ANC26_CANVAS_ADDR                     ((0x39aa  << 2) + 0xff620000)
#define HEVC_ANC27_CANVAS_ADDR                     ((0x39ab  << 2) + 0xff620000)
#define HEVC_ANC28_CANVAS_ADDR                     ((0x39ac  << 2) + 0xff620000)
#define HEVC_ANC29_CANVAS_ADDR                     ((0x39ad  << 2) + 0xff620000)
#define HEVC_ANC30_CANVAS_ADDR                     ((0x39ae  << 2) + 0xff620000)
#define HEVC_ANC31_CANVAS_ADDR                     ((0x39af  << 2) + 0xff620000)
#define HEVC_DBKR_CANVAS_ADDR                      ((0x39b0  << 2) + 0xff620000)
#define HEVC_DBKW_CANVAS_ADDR                      ((0x39b1  << 2) + 0xff620000)
#define HEVC_REC_CANVAS_ADDR                       ((0x39b2  << 2) + 0xff620000)
//28:24, read/write, current canvas idx, used in h264 only now
//23:0, read only, current canvas address, 23:16, Cr canvas addr, 15:8, Cb canvas addr, 7:0, Y  canvas addr
#define HEVC_CURR_CANVAS_CTRL                      ((0x39b3  << 2) + 0xff620000)
#define HEVC_MDEC_PIC_DC_THRESH                    ((0x39b8  << 2) + 0xff620000)
#define HEVC_MDEC_PICR_BUF_STATUS                  ((0x39b9  << 2) + 0xff620000)
#define HEVC_MDEC_PICW_BUF_STATUS                  ((0x39ba  << 2) + 0xff620000)
#define HEVC_MCW_DBLK_WRRSP_CNT                    ((0x39bb  << 2) + 0xff620000)
#define HEVC_MC_MBBOT_WRRSP_CNT                    ((0x39bc  << 2) + 0xff620000)
#define HEVC_MDEC_PICW_BUF2_STATUS                 ((0x39bd  << 2) + 0xff620000)
#define HEVC_WRRSP_FIFO_PICW_DBK                   ((0x39be  << 2) + 0xff620000)
#define HEVC_WRRSP_FIFO_PICW_MC                    ((0x39bf  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_0                          ((0x39c0  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_1                          ((0x39c1  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_2                          ((0x39c2  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_3                          ((0x39c3  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_4                          ((0x39c4  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_5                          ((0x39c5  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_6                          ((0x39c6  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_7                          ((0x39c7  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_8                          ((0x39c8  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_9                          ((0x39c9  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_A                          ((0x39ca  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_B                          ((0x39cb  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_C                          ((0x39cc  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_D                          ((0x39cd  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_E                          ((0x39ce  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_F                          ((0x39cf  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_G                          ((0x39d0  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_H                          ((0x39d1  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_I                          ((0x39d2  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_J                          ((0x39d3  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_K                          ((0x39d4  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_L                          ((0x39d5  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_M                          ((0x39d6  << 2) + 0xff620000)
#define HEVC_AV_SCRATCH_N                          ((0x39d7  << 2) + 0xff620000)
// bit[29:24] A_brst_num_co_mb
// bit[21:16] A_id_co_mb
// bit[11:0] wrrsp_count_co_mb
#define HEVC_WRRSP_CO_MB                           ((0x39d8  << 2) + 0xff620000)
// bit[29:24] A_brst_num_dcac
// bit[21:16] A_id_dcac
// bit[11:0] wrrsp_count_dcac
#define HEVC_WRRSP_DCAC                            ((0x39d9  << 2) + 0xff620000)
// bit[11:0] wrrsp_count_vld
#define HEVC_WRRSP_VLD                             ((0x39da  << 2) + 0xff620000)
// doublew_cfg0[0];     //       Second Channel Enable, 1:Enable 0:Disable
// doublew_cfg0[3:1];   // [2:0] Endian Control for Luma
// doublew_cfg0[5:4];   // [1:0] Pixel sel by horizontal, 0x:1/2 10:left 11:right
// doublew_cfg0[7:6];   // [1:0] Pixel sel by vertical,   0x:1/2 10:up 11:down
// doublew_cfg0[8];     //       Size by horizontal, 0:original size 1: 1/2 shrunken size
// doublew_cfg0[9];     //       Size by vertical,   0:original size 1: 1/2 shrunken size
// doublew_cfg0[10];    //       1:Round 0:Truncation
// doublew_cfg0[11];    //       DMA Urgent
// doublew_cfg0[17:12]; // [5:0] DMA Burst Number
// doublew_cfg0[23:18]; // [5:0] DMA ID
// doublew_cfg0[26:24]; // [2:0] Endian Control for Chroma
// doublew_cfg0[27];    //       Source from, 1:MCW 0:DBLK
// doublew_cfg0[29:28]; // [1:0] 0x:select both top and bottom 10:select top 11:select bottom
// doublew_cfg0[30];    //       0:no merge 1:automatic merge
// doublew_cfg0[31];    //       0:Y addr no change 1:Y addr divided to half
#define HEVC_MDEC_DOUBLEW_CFG0                     ((0x39db  << 2) + 0xff620000)
// doublew_cfg1[7:0];   // [7:0] DMA Canvas Address for Luma
// doublew_cfg1[15:8];  // [7:0] DMA Canvas Address for Chroma
// doublew_cfg1[16];    //       Disable 1st Write -
// doublew_cfg1[17];    //       Reverse to original version -
// doublew_cfg1[18];    //       DMA Address Mode - 0:Canvas Mode 1:Non-Canvas Mode
#define HEVC_MDEC_DOUBLEW_CFG1                     ((0x39dc  << 2) + 0xff620000)
// doublew_cfg2[11:0];  //[11:0] vertical flip initial value
// doublew_cfg2[15];    //       vertical flip enable
// doublew_cfg2[24:16]; // [8:0] horizontal flip initial value
// doublew_cfg2[31];    //       horizontal flip enable
#define HEVC_MDEC_DOUBLEW_CFG2                     ((0x39dd  << 2) + 0xff620000)
// doublew_cfg3[31:0];  //[31:0] non-canvas start address for Luma -
#define HEVC_MDEC_DOUBLEW_CFG3                     ((0x39de  << 2) + 0xff620000)
// doublew_cfg4[31:0];  //[31:0] non-canvas start address for Chroma -
#define HEVC_MDEC_DOUBLEW_CFG4                     ((0x39df  << 2) + 0xff620000)
// doublew_cfg5[12:0];  //[12:0] non-canvas picture width for Luma -
// doublew_cfg5[28:16]; //[12:0] non-canvas picture width for Chroma -
#define HEVC_MDEC_DOUBLEW_CFG5                     ((0x39e0  << 2) + 0xff620000)
// doublew_cfg6: reserved
#define HEVC_MDEC_DOUBLEW_CFG6                     ((0x39e1  << 2) + 0xff620000)
// doublew_cfg7: reserved
#define HEVC_MDEC_DOUBLEW_CFG7                     ((0x39e2  << 2) + 0xff620000)
// doublew_status[11:0];//[11:0] wrrsp_count_doublew
// doublew_status[12];  //       doublew_status_busy
// doublew_status[13];  //       doublew_status_error
#define HEVC_MDEC_DOUBLEW_STATUS                   ((0x39e3  << 2) + 0xff620000)
#define HEVC_MDEC_EXTIF_CFG0                       ((0x39e4  << 2) + 0xff620000)
#define HEVC_MDEC_EXTIF_CFG1                       ((0x39e5  << 2) + 0xff620000)
#define HEVC_MDEC_EXTIF_STS0                       ((0x39e6  << 2) + 0xff620000)
//======================================
//  MC Control Register Bits
//
//======================================
// For bits, just copy the defines...don't translate to addresses
    //`define MC_RESET	    16'h0002
//======================================
//  MB Info Register Bits
//
//======================================
//======================================
//  MB Info Register Bits
//
//======================================
//========================================================================
// DBLK Register:  12'h950 - 12'h97f
//========================================================================
#define HEVC_DBLK_RST                              ((0x3950  << 2) + 0xff620000)
#define HEVC_DBLK_CTRL                             ((0x3951  << 2) + 0xff620000)
#define HEVC_DBLK_MB_WID_HEIGHT                    ((0x3952  << 2) + 0xff620000)
#define HEVC_DBLK_STATUS                           ((0x3953  << 2) + 0xff620000)
#define HEVC_DBLK_CMD_CTRL                         ((0x3954  << 2) + 0xff620000)
#define HEVC_DBLK_MB_XY                            ((0x3955  << 2) + 0xff620000)
#define HEVC_DBLK_QP                               ((0x3956  << 2) + 0xff620000)
#define HEVC_DBLK_Y_BHFILT                         ((0x3957  << 2) + 0xff620000)
#define HEVC_DBLK_Y_BHFILT_HIGH                    ((0x3958  << 2) + 0xff620000)
#define HEVC_DBLK_Y_BVFILT                         ((0x3959  << 2) + 0xff620000)
#define HEVC_DBLK_CB_BFILT                         ((0x395a  << 2) + 0xff620000)
#define HEVC_DBLK_CR_BFILT                         ((0x395b  << 2) + 0xff620000)
#define HEVC_DBLK_Y_HFILT                          ((0x395c  << 2) + 0xff620000)
#define HEVC_DBLK_Y_HFILT_HIGH                     ((0x395d  << 2) + 0xff620000)
#define HEVC_DBLK_Y_VFILT                          ((0x395e  << 2) + 0xff620000)
#define HEVC_DBLK_CB_FILT                          ((0x395f  << 2) + 0xff620000)
#define HEVC_DBLK_CR_FILT                          ((0x3960  << 2) + 0xff620000)
#define HEVC_DBLK_BETAX_QP_SEL                     ((0x3961  << 2) + 0xff620000)
#define HEVC_DBLK_CLIP_CTRL0                       ((0x3962  << 2) + 0xff620000)
#define HEVC_DBLK_CLIP_CTRL1                       ((0x3963  << 2) + 0xff620000)
#define HEVC_DBLK_CLIP_CTRL2                       ((0x3964  << 2) + 0xff620000)
#define HEVC_DBLK_CLIP_CTRL3                       ((0x3965  << 2) + 0xff620000)
#define HEVC_DBLK_CLIP_CTRL4                       ((0x3966  << 2) + 0xff620000)
#define HEVC_DBLK_CLIP_CTRL5                       ((0x3967  << 2) + 0xff620000)
#define HEVC_DBLK_CLIP_CTRL6                       ((0x3968  << 2) + 0xff620000)
#define HEVC_DBLK_CLIP_CTRL7                       ((0x3969  << 2) + 0xff620000)
#define HEVC_DBLK_CLIP_CTRL8                       ((0x396a  << 2) + 0xff620000)
#define HEVC_DBLK_STATUS1                          ((0x396b  << 2) + 0xff620000)
#define HEVC_DBLK_GCLK_FREE                        ((0x396c  << 2) + 0xff620000)
#define HEVC_DBLK_GCLK_OFF                         ((0x396d  << 2) + 0xff620000)
#define HEVC_DBLK_AVSFLAGS                         ((0x396e  << 2) + 0xff620000)
// bit 15:0
#define HEVC_DBLK_CBPY                             ((0x3970  << 2) + 0xff620000)
// bit 11:8 -- deblk_cbpy_bottom
// bit 7:4 -- deblk_cbpy_left
// bit 3:0 -- deblk_cbpy_top
#define HEVC_DBLK_CBPY_ADJ                         ((0x3971  << 2) + 0xff620000)
// bit 7:0 -- deblk_cbpc
#define HEVC_DBLK_CBPC                             ((0x3972  << 2) + 0xff620000)
// bit 15 -- bottom_mb
// bit 14 -- left_mb
// bit 13 -- top_mb
// bit 12 -- reserved
// bit 11:8 -- deblk_cbpc_bottom
// bit 7:4 -- deblk_cbpc_left
// bit 3:0 -- deblk_cbpc_top
#define HEVC_DBLK_CBPC_ADJ                         ((0x3973  << 2) + 0xff620000)
// bit 15:8 -- deblk_hmvd   -- {left_1, left_0, below_1, below_0, block3-0}
// bit 7:0 -- deblk_vmvd    -- {top_1, top_0, below_1, below_0, block3-0}
#define HEVC_DBLK_VHMVD                            ((0x3974  << 2) + 0xff620000)
// bit 13:12 -- right_vmvd
// bit 11 -- right_above_vmvd
// bit 10 -- left_below_hmvd
// bit 9 -- disable_dblk_luma
// bit 8 -- disable_dblk_chroma
// bit 7 -- bBelowRefDiff
// bit 6 -- bLeftRefDiff
// bit 5 -- bAboveRefDiff
// bit 4 -- reserved
// bit 3 -- s_below
// bit 2 -- s_left
// bit 1 -- s_above
// bit 0 -- s
#define HEVC_DBLK_STRONG                           ((0x3975  << 2) + 0xff620000)
// bit 14:10 -- PQUANT
// bit 9:5 -- left_PQUANT
// bit 4:0 -- top_PQUANT
#define HEVC_DBLK_RV8_QUANT                        ((0x3976  << 2) + 0xff620000)
#define HEVC_DBLK_CBUS_HCMD2                       ((0x3977  << 2) + 0xff620000)
#define HEVC_DBLK_CBUS_HCMD1                       ((0x3978  << 2) + 0xff620000)
#define HEVC_DBLK_CBUS_HCMD0                       ((0x3979  << 2) + 0xff620000)
#define HEVC_DBLK_VLD_HCMD2                        ((0x397a  << 2) + 0xff620000)
#define HEVC_DBLK_VLD_HCMD1                        ((0x397b  << 2) + 0xff620000)
#define HEVC_DBLK_VLD_HCMD0                        ((0x397c  << 2) + 0xff620000)
#define HEVC_DBLK_OST_YBASE                        ((0x397d  << 2) + 0xff620000)
#define HEVC_DBLK_OST_CBCRDIFF                     ((0x397e  << 2) + 0xff620000)
//13:8 dblk thread ID and token
//5:0  dblk prearbitor burst num
#define HEVC_DBLK_CTRL1                            ((0x397f  << 2) + 0xff620000)
// MCRCC_CTL1
// 31:3  <reserved[23:0]>
// 2     <cfg_field_pic>
// 1     <sw_rst>
// 0     <bypass_en>
#define HEVC_MCRCC_CTL1                            ((0x3980  << 2) + 0xff620000)
// MCRCC_CTL2
// 31:24    <cfg_cache_anc01_c[7:0]>
// 23:16    <cfg_cache_anc01_y[7:0]>
// 15:8     <cfg_cache_anc00_c[7:0]>
// 7:0      <cfg_cache_anc00_y[7:0]>
#define HEVC_MCRCC_CTL2                            ((0x3981  << 2) + 0xff620000)
// MCRCC_CTL3
// 31:24    <cfg_cache_anc11_c[7:0]>
// 23:16    <cfg_cache_anc11_y[7:0]>
// 15:8     <cfg_cache_anc10_c[7:0]>
// 7:0      <cfg_cache_anc10_y[7:0]>
#define HEVC_MCRCC_CTL3                            ((0x3982  << 2) + 0xff620000)
// bit[31:10] reserved
// bit[9:0] sw_clock_gating control
// [9] vdec clk_en for assist and cbus.
// [8] vdec clk_en for ddr
// [7] vdec clk_en for vcpu
// [6] vdec clk_en for assist
// [5] vdec clk_en for dblk
// [4] vdec clk_en for iqidct
// [3] vdec clk_en for mc
// [2] vdec clk_en for pic_dc
// [1] vdec clk_en for psc
// [0] vdec clk_en for vld
#define HEVC_GCLK_EN                               ((0x3983  << 2) + 0xff620000)
// [0]  Reserved
// [1]  Reserved
// [2]  Reset assist, mdec's CBUS
// [3]  Reset mdec's VLD
// [4]  Reset mdec's VLD
// [5]  Reset mdec's VLD
// [6]  Reset mdec's IQIDCT
// [7]  Reset mdec's MC
// [8]  Reset mdec's DBLK
// [9]  Reset mdec's PIC_DC
// [10] Reset mdec's Pscale
// [11] Reset vcpu's MCPU
// [12] Reset vcpu's CCPU
// [13] Reset mmc_pre_arb
#define HEVC_MDEC_SW_RESET                         ((0x3984  << 2) + 0xff620000)
//DBLK last address 12'h97f
//
// Closing file:  mdec_regs.h
//
//
// Reading file:  vld_regs.h
//
//========================================================================
//  VLD module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_VDEC_VLD_CBUS_BASE = 0x0c
// -----------------------------------------------
#define HCODEC_VLD_STATUS_CTRL                     ((0x1c00  << 2) + 0xff620000)
//
// bit 10 -- use_old_shift_en
// bit 9 -- output_mv_not_pmv
// bit 8:5 -- force_zigzag
// bit 4 -- force_zigzag_en
// bit 3 -- disable_viff_anempty_int
// bit 2 -- disable_m2_ac_coeff_one_cycle
// bit 1 -- forced_reset  force reset pmv
// bit 0 -- mpeg_type  0:mpeg1 1: mpeg2
#define HCODEC_MPEG1_2_REG                         ((0x1c01  << 2) + 0xff620000)
#define HCODEC_F_CODE_REG                          ((0x1c02  << 2) + 0xff620000)
#define HCODEC_PIC_HEAD_INFO                       ((0x1c03  << 2) + 0xff620000)
#define HCODEC_SLICE_VER_POS_PIC_TYPE              ((0x1c04  << 2) + 0xff620000)
#define HCODEC_QP_VALUE_REG                        ((0x1c05  << 2) + 0xff620000)
#define HCODEC_MBA_INC                             ((0x1c06  << 2) + 0xff620000)
#define HCODEC_MB_MOTION_MODE                      ((0x1c07  << 2) + 0xff620000)
//`define PACKET_BYTE_COUNT   8'h08
// bit 15 -- force_search_startcode_en
// bit 14 -- int_cpu_when_error (before do anything)
// bit 13 -- vld_error_reset
// bit 12 -- return_on_slice_header
// bit 6 -- jpeg_ff00_en
// bit 5:0 -- vld_power_ctl
#define HCODEC_POWER_CTL_VLD                       ((0x1c08  << 2) + 0xff620000)
#define HCODEC_MB_WIDTH                            ((0x1c09  << 2) + 0xff620000)
#define HCODEC_SLICE_QP                            ((0x1c0a  << 2) + 0xff620000)
// `define MB_X_MB_Y           8'h0b   /* current MBX and MBY                  */
#define HCODEC_PRE_START_CODE                      ((0x1c0b  << 2) + 0xff620000)
#define HCODEC_SLICE_START_BYTE_01                 ((0x1c0c  << 2) + 0xff620000)
#define HCODEC_SLICE_START_BYTE_23                 ((0x1c0d  << 2) + 0xff620000)
#define HCODEC_RESYNC_MARKER_LENGTH                ((0x1c0e  << 2) + 0xff620000)
// bit[6:5] - frame/field info, 01 - top, 10 - bottom, 11 - frame
// bit[4:0] - buffer ID
// L0_BUFF_ID_0, L0_BUFF_ID_1, L1_BUFF_ID_0, L1_BUFF_ID_1
#define HCODEC_DECODER_BUFFER_INFO                 ((0x1c0f  << 2) + 0xff620000)
#define HCODEC_FST_FOR_MV_X                        ((0x1c10  << 2) + 0xff620000)
#define HCODEC_FST_FOR_MV_Y                        ((0x1c11  << 2) + 0xff620000)
#define HCODEC_SCD_FOR_MV_X                        ((0x1c12  << 2) + 0xff620000)
#define HCODEC_SCD_FOR_MV_Y                        ((0x1c13  << 2) + 0xff620000)
#define HCODEC_FST_BAK_MV_X                        ((0x1c14  << 2) + 0xff620000)
#define HCODEC_FST_BAK_MV_Y                        ((0x1c15  << 2) + 0xff620000)
#define HCODEC_SCD_BAK_MV_X                        ((0x1c16  << 2) + 0xff620000)
#define HCODEC_SCD_BAK_MV_Y                        ((0x1c17  << 2) + 0xff620000)
// Bit 7:4 -- read_buffer_interlace  0-progressive, 1-interlace, used in VC1
// bit 3 -- disable_new_stcode_search_fix // From GXM
// bit 2 -- weighting_prediction
// bit 1 -- mb_weighting_flag
// bit 0 -- slice_weighting_flag
#define HCODEC_VLD_DECODE_CONTROL                  ((0x1c18  << 2) + 0xff620000)
#define HCODEC_VLD_REVERVED_19                     ((0x1c19  << 2) + 0xff620000)
#define HCODEC_VIFF_BIT_CNT                        ((0x1c1a  << 2) + 0xff620000)
#define HCODEC_BYTE_ALIGN_PEAK_HI                  ((0x1c1b  << 2) + 0xff620000)
#define HCODEC_BYTE_ALIGN_PEAK_LO                  ((0x1c1c  << 2) + 0xff620000)
#define HCODEC_NEXT_ALIGN_PEAK                     ((0x1c1d  << 2) + 0xff620000)
// bit 31    : byte_aligned_zero_23_from_org // From GXM
// bit 30    : force_shift_out_drop_flag_zero // From GXM
// bit 29    : en_st_protect_from_org // From GXM
// bit 28    : enable_halt_decode_start_voff
// bit 27    : disable_C_pred_check
// bit 26    : disable_I4_pred_check
// bit 25    : disable_I16_pred_check
// bit 24    : check_avs_1st_drop
// bit 23    : enable_cabac_protect // From GXM
// bit 22    : enable_avs_drop_more
// bit 21    : reset_avs_drop_ptr
// bit 20    : reset_cabac_use_next_at_end_req
// bit 19    : vc1_inv_intra_co_mb_ref_rd
// bit 18    : vc1_inv_co_mb_ref_rd
// bit 17    : vc1_inv_intra_co_mb_ref_wr
// bit 16    : vc1_inv_co_mb_ref_wr
// bit 15    : disable_mv_cal_begin_only
// bit 14    : avs_drop_enable
// bit 13:12 : avs_drop_ptr
// bit 11:8  : avs_demu_ctl_reg
// bit 7 : avs_enable
// bit 6 : disable_dblk_hcmd
// bit 5 : disable_mc_hcmd
// bit 4 : first_mode3_set enable
// bit 3 : first_mode3
// bit 2:1 : vc1_profile  0-SP, 1-MP, 2-reserved, 3-AP
// bit 0   : vc1_enable
#define HCODEC_VC1_CONTROL_REG                     ((0x1c1e  << 2) + 0xff620000)
#define HCODEC_PMV1_X                              ((0x1c20  << 2) + 0xff620000)
#define HCODEC_PMV1_Y                              ((0x1c21  << 2) + 0xff620000)
#define HCODEC_PMV2_X                              ((0x1c22  << 2) + 0xff620000)
#define HCODEC_PMV2_Y                              ((0x1c23  << 2) + 0xff620000)
#define HCODEC_PMV3_X                              ((0x1c24  << 2) + 0xff620000)
#define HCODEC_PMV3_Y                              ((0x1c25  << 2) + 0xff620000)
#define HCODEC_PMV4_X                              ((0x1c26  << 2) + 0xff620000)
#define HCODEC_PMV4_Y                              ((0x1c27  << 2) + 0xff620000)
// Can't use the same address for different defines
// Therefore, create a single define that covers both
// Only appears to be used in micro-code since the VLD hardware is
// hard coded.
// `define M4_TABLE_SELECT     8'h28  // Does this exist in HW ? Added from register_mp2.h
// `define M4_TABLE_OUTPUT     8'h28  // Does this exist in HW ? Added from register_mp2.h
#define HCODEC_M4_TABLE_SELECT                     ((0x1c28  << 2) + 0xff620000)
#define HCODEC_M4_CONTROL_REG                      ((0x1c29  << 2) + 0xff620000)
#define HCODEC_BLOCK_NUM                           ((0x1c2a  << 2) + 0xff620000)
#define HCODEC_PATTERN_CODE                        ((0x1c2b  << 2) + 0xff620000)
#define HCODEC_MB_INFO                             ((0x1c2c  << 2) + 0xff620000)
#define HCODEC_VLD_DC_PRED                         ((0x1c2d  << 2) + 0xff620000)
#define HCODEC_VLD_ERROR_MASK                      ((0x1c2e  << 2) + 0xff620000)
#define HCODEC_VLD_DC_PRED_C                       ((0x1c2f  << 2) + 0xff620000)
#define HCODEC_LAST_SLICE_MV_ADDR                  ((0x1c30  << 2) + 0xff620000)
#define HCODEC_LAST_MVX                            ((0x1c31  << 2) + 0xff620000)
#define HCODEC_LAST_MVY                            ((0x1c32  << 2) + 0xff620000)
#define HCODEC_VLD_C38                             ((0x1c38  << 2) + 0xff620000)
#define HCODEC_VLD_C39                             ((0x1c39  << 2) + 0xff620000)
#define HCODEC_VLD_STATUS                          ((0x1c3a  << 2) + 0xff620000)
#define HCODEC_VLD_SHIFT_STATUS                    ((0x1c3b  << 2) + 0xff620000)
// `define VLD_SHIFT_INFO      8'h3b  // Does this exist in HW ? used in $ucode/mpeg4
#define HCODEC_VOFF_STATUS                         ((0x1c3c  << 2) + 0xff620000)
#define HCODEC_VLD_C3D                             ((0x1c3d  << 2) + 0xff620000)
#define HCODEC_VLD_DBG_INDEX                       ((0x1c3e  << 2) + 0xff620000)
// vld_buff_info -- (index == 0)
// Bit11]    halt_decode_start_voff
// Bit10]    C_pred_error
// Bit[9]    I4_pred_error
// Bit[8]    I16_pred_error
// Bit[7:6]  mv_UR_ready_cnt;
// Bit[5]  vld_wr_idx
// Bit[4]  iq_rd_idx
// Bit[3]  vld_vi_block_rdy_1
// Bit[2]  vld_vi_block_rdy_2
// Bit[1]  voff_empty_1
// Bit[0]  voff_empty_2
// cabac_buff_info_0 -- (index == 1)
// Bit[31] shift_data_ready
// Bit[30:29] Reserved
// Bit[28:24] cabac_buffer_ptr
// Bit[23:0] cabac_buffer
// cabac_buff_info_1 -- (index == 2)
// Bit[31:29] Reserved
// Bit[28:20] Drange
// Bit[19:16] bin_count_4
// Bit[15:13] Reserved
// Bit[12:6] context_mem_do
// Bit[5:3] coeff_state
// Bit[2:0] mvd_state
// h264_mv_present -- (index == 3)
// Bit[31:16] mv_present_l0
// Bit[15:0] mv_present_l1
// h264_mv_cal_info_0 -- (index == 4)
// [31:28] mv_cal_state
// [27:24] direct_spatial_cnt
// Bit[23:21] Reserved
// Bit[20] mv_UR_ready_for_mv_cal
// Bit[19] co_mb_mem_ready_for_mv_cal
// Bit[18] mc_dblk_cmd_if_busy
// Bit[17] h264_co_mb_wr_busy
// Bit[16] H264_cbp_blk_ready
// Bit[15] mc_hcmd_rrdy
// Bit[14] mc_hcmd_srdy
// Bit[13] mc_cmd_if_ready
// Bit[12] mc_hcmd_mv_available
// Bit[11:8] mc_cmd_if_state
// Bit[7] dblk_hcmd_rrdy
// Bit[6] dblk_hcmd_srdy
// Bit[5] dblk_cmd_if_ready
// Bit[4] dblk_hcmd_mv_available
// Bit[3:0] dblk_cmd_if_state
// h264_mv_cal_info_1 -- (index == 5)
//  Bit[31:29] Reserved
//  Bit[28:24] total_mvd_num_l0
//  Bit[23:21] Reserved
//  Bit[20:16] mv_cal_ptr_l0
//  Bit[15:13] Reserved
//  Bit[12:8] mc_hcmd_ptr_l0
//  Bit[7:5] Reserved
//  Bit[4:0] dblk_hcmd_ptr_l0
// h264_mv_cal_info_2 -- (index == 6)
//  Bit[31:29] Reserved
//  Bit[28:24] total_mvd_num_l1
//  Bit[23:21] Reserved
//  Bit[20:16] mv_cal_ptr_l1
//  Bit[15:13] Reserved
//  Bit[12:8] mc_hcmd_ptr_l1
//  Bit[7:5] Reserved
//  Bit[4:0] dblk_hcmd_ptr_l1
// h264_co_mb_info -- (index == 7)
// Bit[31:26] Reserved
// Bit[25] mv_scale_cal_busy
// Bit[24:20] co_mv_count
// Bit[19:16] co_mv_process_state
// Bit[15] h264_co_mb_rd_busy
// Bit[15] h264_co_mb_rd_ready
// Bit[13:12] co_mv_transfer_block_cnt
// Bit[11:8] co_mv_transfer_ptr
// Bit[7] co_mv_POC_l1_busy
// Bit[6] h264_weight_scale_cal_en
// Bit[5] weight_cal_busy
// Bit[4] weight_cal_not_finished
// Bit[3:0] weight_process_state
#define HCODEC_VLD_DBG_DATA                        ((0x1c3f  << 2) + 0xff620000)
// --------------------------------------------
// VIFIFO DDR Interface
// --------------------------------------------
// The VIFIFO start pointer into DDR memory is a 32-bit number
// The Start pointer will automatically be truncated to land on
// an 8-byte boundary.  That is, bits [2:0] = 0;
#define HCODEC_VLD_MEM_VIFIFO_START_PTR            ((0x1c40  << 2) + 0xff620000)
// The current pointer points so some location between the START and END
// pointers.  The current pointer is a BYTE pointer.  That is, you can
// point to any BYTE address within the START/END range
#define HCODEC_VLD_MEM_VIFIFO_CURR_PTR             ((0x1c41  << 2) + 0xff620000)
#define HCODEC_VLD_MEM_VIFIFO_END_PTR              ((0x1c42  << 2) + 0xff620000)
#define HCODEC_VLD_MEM_VIFIFO_BYTES_AVAIL          ((0x1c43  << 2) + 0xff620000)
// VIFIFO FIFO Control
// bit  [31:24] viff_empty_int_enable_cpu[7:0]
// bit  [23:16] viff_empty_int_enable_amrisc[7:0]
//   -bit 23 Video BUFFER < 0x400 Bytes
//   -bit 22 Video BUFFER < 0x200 Bytes
//   -bit 21 Video BUFFER < 0x100 Bytes
//   -bit 20 Video BUFFER < 0x80 Bytes
//   -bit 19 Video BUFFER < 0x40 Bytes
//   -bit 18 Video BUFFER < 0x20 Bytes
//   -bit 17 vififo  < 16 double words
//   -bit 16 vififo  < 8 double words
// bit  [15:13] unused
// bit  [12]    A_urgent
// bit  [11]    transfer_length 0 - 32x64 Bits per request, 1 - 16x64 Bits per request
// bit  [10]    use_level       Set this bit to 1 to enable filling of the FIFO controlled by the buffer
//                              level control.  If this bit is 0, then use bit[1] to control the enabling of filling
// bit  [9]     Data Ready.     This bit is set when data can be popped
// bit  [8]     fill busy       This bit will be high when we're fetching data from the DDR memory
//                              To reset this module, set cntl_enable = 0, and then wait for busy = 0.
//                              After that you can pulse cntl_init to start over
// bit  [7]     init_with_cntl_init
// bit  [6]     reserved
// bits [5:3]   endian:         see $lib/rtl/ddr_endian.v
// bit  [2]     cntl_empty_en   Set to 1 to enable reading the DDR memory FIFO
//                              Set cntl_empty_en = cntl_fill_en = 0 when pulsing cntl_init
// bit  [1]     cntl_fill_en    Set to 1 to enable reading data from DDR memory
// bit  [0]     cntl_init:      After setting the read pointers, sizes, channel masks
//                              and read masks, set this bit to 1 and then to 0
//                              NOTE:  You don't need to pulse cntl_init if only the start address is
//                              being changed
#define HCODEC_VLD_MEM_VIFIFO_CONTROL              ((0x1c44  << 2) + 0xff620000)
// --------------------------------------------
// VIFIFO Buffer Level Manager
// --------------------------------------------
#define HCODEC_VLD_MEM_VIFIFO_WP                   ((0x1c45  << 2) + 0xff620000)
#define HCODEC_VLD_MEM_VIFIFO_RP                   ((0x1c46  << 2) + 0xff620000)
#define HCODEC_VLD_MEM_VIFIFO_LEVEL                ((0x1c47  << 2) + 0xff620000)
//
// bit  [8]     use_parser_video2_wp
// bit  [7]     vbuf2_out_manual
// bit  [6]     vbuf_out_manual
// bit  [5]     empty (ReadOnly)
// bit  [4]     full (ReadOnly)
// bit  [3:2]   reserved
// bit  [1]     manual mode     Set to 1 for manual write pointer mode
// bit  [0]     Init            Set high then low after everything has been initialized
#define HCODEC_VLD_MEM_VIFIFO_BUF_CNTL             ((0x1c48  << 2) + 0xff620000)
// bit 31:16 -- drop_bytes
// bit 15:14 -- drop_status (Read-Only)
// bit 13:12 -- sync_match_position (Read-Only)
// bit 11:6 -- reserved
// bit 5:4 -- TIME_STAMP_NUMBER, 0-32bits, 1-64bits, 2-96bits, 3-128bits
// bit 3 -- stamp_soft_reset
// bit 2 -- TIME_STAMP_length_enable
// bit 1 -- TIME_STAMP_sync64_enable
// bit 0 -- TIME_STAMP_enable
#define HCODEC_VLD_TIME_STAMP_CNTL                 ((0x1c49  << 2) + 0xff620000)
// bit 31:0 -- TIME_STAMP_SYNC_CODE_0
#define HCODEC_VLD_TIME_STAMP_SYNC_0               ((0x1c4a  << 2) + 0xff620000)
// bit 31:0 -- TIME_STAMP_SYNC_CODE_1
#define HCODEC_VLD_TIME_STAMP_SYNC_1               ((0x1c4b  << 2) + 0xff620000)
// bit 31:0 TIME_STAMP_0
#define HCODEC_VLD_TIME_STAMP_0                    ((0x1c4c  << 2) + 0xff620000)
// bit 31:0 TIME_STAMP_1
#define HCODEC_VLD_TIME_STAMP_1                    ((0x1c4d  << 2) + 0xff620000)
// bit 31:0 TIME_STAMP_2
#define HCODEC_VLD_TIME_STAMP_2                    ((0x1c4e  << 2) + 0xff620000)
// bit 31:0 TIME_STAMP_3
#define HCODEC_VLD_TIME_STAMP_3                    ((0x1c4f  << 2) + 0xff620000)
// bit 31:0 TIME_STAMP_LENGTH
#define HCODEC_VLD_TIME_STAMP_LENGTH               ((0x1c50  << 2) + 0xff620000)
// bit 15:0 vififo_rd_count
#define HCODEC_VLD_MEM_VIFIFO_WRAP_COUNT           ((0x1c51  << 2) + 0xff620000)
// bit 29:24 A_brst_num
// bit 21:16 A_id
// bit 15:0 level_hold
#define HCODEC_VLD_MEM_VIFIFO_MEM_CTL              ((0x1c52  << 2) + 0xff620000)
#define HCODEC_VLD_MEM_VBUF_RD_PTR                 ((0x1c53  << 2) + 0xff620000)
#define HCODEC_VLD_MEM_VBUF2_RD_PTR                ((0x1c54  << 2) + 0xff620000)
#define HCODEC_VLD_MEM_SWAP_ADDR                   ((0x1c55  << 2) + 0xff620000)
// bit[23:16] - swap_d_count (Read Only)
// bit[15:8]  - swap_a_count (Read Only)
// bit [7] - swap busy (Read Only)
// bit [6:2] - reserved
// bit [1] - 1 - STORE to Memory, 0 - LOAD from Memory
// bit [0] - swap active
#define HCODEC_VLD_MEM_SWAP_CTL                    ((0x1c56  << 2) + 0xff620000)
//
// Closing file:  vld_regs.h
//
//
// Reading file:  vld_regs.h
//
//========================================================================
//  VLD module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_VDEC_VLD_CBUS_BASE = 0x0c
// -----------------------------------------------
#define VDEC2_VLD_STATUS_CTRL                      ((0x2c00  << 2) + 0xff620000)
//
// bit 10 -- use_old_shift_en
// bit 9 -- output_mv_not_pmv
// bit 8:5 -- force_zigzag
// bit 4 -- force_zigzag_en
// bit 3 -- disable_viff_anempty_int
// bit 2 -- disable_m2_ac_coeff_one_cycle
// bit 1 -- forced_reset  force reset pmv
// bit 0 -- mpeg_type  0:mpeg1 1: mpeg2
#define VDEC2_MPEG1_2_REG                          ((0x2c01  << 2) + 0xff620000)
#define VDEC2_F_CODE_REG                           ((0x2c02  << 2) + 0xff620000)
#define VDEC2_PIC_HEAD_INFO                        ((0x2c03  << 2) + 0xff620000)
#define VDEC2_SLICE_VER_POS_PIC_TYPE               ((0x2c04  << 2) + 0xff620000)
#define VDEC2_QP_VALUE_REG                         ((0x2c05  << 2) + 0xff620000)
#define VDEC2_MBA_INC                              ((0x2c06  << 2) + 0xff620000)
#define VDEC2_MB_MOTION_MODE                       ((0x2c07  << 2) + 0xff620000)
//`define PACKET_BYTE_COUNT   8'h08
// bit 15 -- force_search_startcode_en
// bit 14 -- int_cpu_when_error (before do anything)
// bit 13 -- vld_error_reset
// bit 12 -- return_on_slice_header
// bit 6 -- jpeg_ff00_en
// bit 5:0 -- vld_power_ctl
#define VDEC2_POWER_CTL_VLD                        ((0x2c08  << 2) + 0xff620000)
#define VDEC2_MB_WIDTH                             ((0x2c09  << 2) + 0xff620000)
#define VDEC2_SLICE_QP                             ((0x2c0a  << 2) + 0xff620000)
// `define MB_X_MB_Y           8'h0b   /* current MBX and MBY                  */
#define VDEC2_PRE_START_CODE                       ((0x2c0b  << 2) + 0xff620000)
#define VDEC2_SLICE_START_BYTE_01                  ((0x2c0c  << 2) + 0xff620000)
#define VDEC2_SLICE_START_BYTE_23                  ((0x2c0d  << 2) + 0xff620000)
#define VDEC2_RESYNC_MARKER_LENGTH                 ((0x2c0e  << 2) + 0xff620000)
// bit[6:5] - frame/field info, 01 - top, 10 - bottom, 11 - frame
// bit[4:0] - buffer ID
// L0_BUFF_ID_0, L0_BUFF_ID_1, L1_BUFF_ID_0, L1_BUFF_ID_1
#define VDEC2_DECODER_BUFFER_INFO                  ((0x2c0f  << 2) + 0xff620000)
#define VDEC2_FST_FOR_MV_X                         ((0x2c10  << 2) + 0xff620000)
#define VDEC2_FST_FOR_MV_Y                         ((0x2c11  << 2) + 0xff620000)
#define VDEC2_SCD_FOR_MV_X                         ((0x2c12  << 2) + 0xff620000)
#define VDEC2_SCD_FOR_MV_Y                         ((0x2c13  << 2) + 0xff620000)
#define VDEC2_FST_BAK_MV_X                         ((0x2c14  << 2) + 0xff620000)
#define VDEC2_FST_BAK_MV_Y                         ((0x2c15  << 2) + 0xff620000)
#define VDEC2_SCD_BAK_MV_X                         ((0x2c16  << 2) + 0xff620000)
#define VDEC2_SCD_BAK_MV_Y                         ((0x2c17  << 2) + 0xff620000)
// Bit 7:4 -- read_buffer_interlace  0-progressive, 1-interlace, used in VC1
// bit 3 -- disable_new_stcode_search_fix // From GXM
// bit 2 -- weighting_prediction
// bit 1 -- mb_weighting_flag
// bit 0 -- slice_weighting_flag
#define VDEC2_VLD_DECODE_CONTROL                   ((0x2c18  << 2) + 0xff620000)
#define VDEC2_VLD_REVERVED_19                      ((0x2c19  << 2) + 0xff620000)
#define VDEC2_VIFF_BIT_CNT                         ((0x2c1a  << 2) + 0xff620000)
#define VDEC2_BYTE_ALIGN_PEAK_HI                   ((0x2c1b  << 2) + 0xff620000)
#define VDEC2_BYTE_ALIGN_PEAK_LO                   ((0x2c1c  << 2) + 0xff620000)
#define VDEC2_NEXT_ALIGN_PEAK                      ((0x2c1d  << 2) + 0xff620000)
// bit 31    : byte_aligned_zero_23_from_org // From GXM
// bit 30    : force_shift_out_drop_flag_zero // From GXM
// bit 29    : en_st_protect_from_org // From GXM
// bit 28    : enable_halt_decode_start_voff
// bit 27    : disable_C_pred_check
// bit 26    : disable_I4_pred_check
// bit 25    : disable_I16_pred_check
// bit 24    : check_avs_1st_drop
// bit 23    : enable_cabac_protect // From GXM
// bit 22    : enable_avs_drop_more
// bit 21    : reset_avs_drop_ptr
// bit 20    : reset_cabac_use_next_at_end_req
// bit 19    : vc1_inv_intra_co_mb_ref_rd
// bit 18    : vc1_inv_co_mb_ref_rd
// bit 17    : vc1_inv_intra_co_mb_ref_wr
// bit 16    : vc1_inv_co_mb_ref_wr
// bit 15    : disable_mv_cal_begin_only
// bit 14    : avs_drop_enable
// bit 13:12 : avs_drop_ptr
// bit 11:8  : avs_demu_ctl_reg
// bit 7 : avs_enable
// bit 6 : disable_dblk_hcmd
// bit 5 : disable_mc_hcmd
// bit 4 : first_mode3_set enable
// bit 3 : first_mode3
// bit 2:1 : vc1_profile  0-SP, 1-MP, 2-reserved, 3-AP
// bit 0   : vc1_enable
#define VDEC2_VC1_CONTROL_REG                      ((0x2c1e  << 2) + 0xff620000)
#define VDEC2_PMV1_X                               ((0x2c20  << 2) + 0xff620000)
#define VDEC2_PMV1_Y                               ((0x2c21  << 2) + 0xff620000)
#define VDEC2_PMV2_X                               ((0x2c22  << 2) + 0xff620000)
#define VDEC2_PMV2_Y                               ((0x2c23  << 2) + 0xff620000)
#define VDEC2_PMV3_X                               ((0x2c24  << 2) + 0xff620000)
#define VDEC2_PMV3_Y                               ((0x2c25  << 2) + 0xff620000)
#define VDEC2_PMV4_X                               ((0x2c26  << 2) + 0xff620000)
#define VDEC2_PMV4_Y                               ((0x2c27  << 2) + 0xff620000)
// Can't use the same address for different defines
// Therefore, create a single define that covers both
// Only appears to be used in micro-code since the VLD hardware is
// hard coded.
// `define M4_TABLE_SELECT     8'h28  // Does this exist in HW ? Added from register_mp2.h
// `define M4_TABLE_OUTPUT     8'h28  // Does this exist in HW ? Added from register_mp2.h
#define VDEC2_M4_TABLE_SELECT                      ((0x2c28  << 2) + 0xff620000)
#define VDEC2_M4_CONTROL_REG                       ((0x2c29  << 2) + 0xff620000)
#define VDEC2_BLOCK_NUM                            ((0x2c2a  << 2) + 0xff620000)
#define VDEC2_PATTERN_CODE                         ((0x2c2b  << 2) + 0xff620000)
#define VDEC2_MB_INFO                              ((0x2c2c  << 2) + 0xff620000)
#define VDEC2_VLD_DC_PRED                          ((0x2c2d  << 2) + 0xff620000)
#define VDEC2_VLD_ERROR_MASK                       ((0x2c2e  << 2) + 0xff620000)
#define VDEC2_VLD_DC_PRED_C                        ((0x2c2f  << 2) + 0xff620000)
#define VDEC2_LAST_SLICE_MV_ADDR                   ((0x2c30  << 2) + 0xff620000)
#define VDEC2_LAST_MVX                             ((0x2c31  << 2) + 0xff620000)
#define VDEC2_LAST_MVY                             ((0x2c32  << 2) + 0xff620000)
#define VDEC2_VLD_C38                              ((0x2c38  << 2) + 0xff620000)
#define VDEC2_VLD_C39                              ((0x2c39  << 2) + 0xff620000)
#define VDEC2_VLD_STATUS                           ((0x2c3a  << 2) + 0xff620000)
#define VDEC2_VLD_SHIFT_STATUS                     ((0x2c3b  << 2) + 0xff620000)
// `define VLD_SHIFT_INFO      8'h3b  // Does this exist in HW ? used in $ucode/mpeg4
#define VDEC2_VOFF_STATUS                          ((0x2c3c  << 2) + 0xff620000)
#define VDEC2_VLD_C3D                              ((0x2c3d  << 2) + 0xff620000)
#define VDEC2_VLD_DBG_INDEX                        ((0x2c3e  << 2) + 0xff620000)
// vld_buff_info -- (index == 0)
// Bit11]    halt_decode_start_voff
// Bit10]    C_pred_error
// Bit[9]    I4_pred_error
// Bit[8]    I16_pred_error
// Bit[7:6]  mv_UR_ready_cnt;
// Bit[5]  vld_wr_idx
// Bit[4]  iq_rd_idx
// Bit[3]  vld_vi_block_rdy_1
// Bit[2]  vld_vi_block_rdy_2
// Bit[1]  voff_empty_1
// Bit[0]  voff_empty_2
// cabac_buff_info_0 -- (index == 1)
// Bit[31] shift_data_ready
// Bit[30:29] Reserved
// Bit[28:24] cabac_buffer_ptr
// Bit[23:0] cabac_buffer
// cabac_buff_info_1 -- (index == 2)
// Bit[31:29] Reserved
// Bit[28:20] Drange
// Bit[19:16] bin_count_4
// Bit[15:13] Reserved
// Bit[12:6] context_mem_do
// Bit[5:3] coeff_state
// Bit[2:0] mvd_state
// h264_mv_present -- (index == 3)
// Bit[31:16] mv_present_l0
// Bit[15:0] mv_present_l1
// h264_mv_cal_info_0 -- (index == 4)
// [31:28] mv_cal_state
// [27:24] direct_spatial_cnt
// Bit[23:21] Reserved
// Bit[20] mv_UR_ready_for_mv_cal
// Bit[19] co_mb_mem_ready_for_mv_cal
// Bit[18] mc_dblk_cmd_if_busy
// Bit[17] h264_co_mb_wr_busy
// Bit[16] H264_cbp_blk_ready
// Bit[15] mc_hcmd_rrdy
// Bit[14] mc_hcmd_srdy
// Bit[13] mc_cmd_if_ready
// Bit[12] mc_hcmd_mv_available
// Bit[11:8] mc_cmd_if_state
// Bit[7] dblk_hcmd_rrdy
// Bit[6] dblk_hcmd_srdy
// Bit[5] dblk_cmd_if_ready
// Bit[4] dblk_hcmd_mv_available
// Bit[3:0] dblk_cmd_if_state
// h264_mv_cal_info_1 -- (index == 5)
//  Bit[31:29] Reserved
//  Bit[28:24] total_mvd_num_l0
//  Bit[23:21] Reserved
//  Bit[20:16] mv_cal_ptr_l0
//  Bit[15:13] Reserved
//  Bit[12:8] mc_hcmd_ptr_l0
//  Bit[7:5] Reserved
//  Bit[4:0] dblk_hcmd_ptr_l0
// h264_mv_cal_info_2 -- (index == 6)
//  Bit[31:29] Reserved
//  Bit[28:24] total_mvd_num_l1
//  Bit[23:21] Reserved
//  Bit[20:16] mv_cal_ptr_l1
//  Bit[15:13] Reserved
//  Bit[12:8] mc_hcmd_ptr_l1
//  Bit[7:5] Reserved
//  Bit[4:0] dblk_hcmd_ptr_l1
// h264_co_mb_info -- (index == 7)
// Bit[31:26] Reserved
// Bit[25] mv_scale_cal_busy
// Bit[24:20] co_mv_count
// Bit[19:16] co_mv_process_state
// Bit[15] h264_co_mb_rd_busy
// Bit[15] h264_co_mb_rd_ready
// Bit[13:12] co_mv_transfer_block_cnt
// Bit[11:8] co_mv_transfer_ptr
// Bit[7] co_mv_POC_l1_busy
// Bit[6] h264_weight_scale_cal_en
// Bit[5] weight_cal_busy
// Bit[4] weight_cal_not_finished
// Bit[3:0] weight_process_state
#define VDEC2_VLD_DBG_DATA                         ((0x2c3f  << 2) + 0xff620000)
// --------------------------------------------
// VIFIFO DDR Interface
// --------------------------------------------
// The VIFIFO start pointer into DDR memory is a 32-bit number
// The Start pointer will automatically be truncated to land on
// an 8-byte boundary.  That is, bits [2:0] = 0;
#define VDEC2_VLD_MEM_VIFIFO_START_PTR             ((0x2c40  << 2) + 0xff620000)
// The current pointer points so some location between the START and END
// pointers.  The current pointer is a BYTE pointer.  That is, you can
// point to any BYTE address within the START/END range
#define VDEC2_VLD_MEM_VIFIFO_CURR_PTR              ((0x2c41  << 2) + 0xff620000)
#define VDEC2_VLD_MEM_VIFIFO_END_PTR               ((0x2c42  << 2) + 0xff620000)
#define VDEC2_VLD_MEM_VIFIFO_BYTES_AVAIL           ((0x2c43  << 2) + 0xff620000)
// VIFIFO FIFO Control
// bit  [31:24] viff_empty_int_enable_cpu[7:0]
// bit  [23:16] viff_empty_int_enable_amrisc[7:0]
//   -bit 23 Video BUFFER < 0x400 Bytes
//   -bit 22 Video BUFFER < 0x200 Bytes
//   -bit 21 Video BUFFER < 0x100 Bytes
//   -bit 20 Video BUFFER < 0x80 Bytes
//   -bit 19 Video BUFFER < 0x40 Bytes
//   -bit 18 Video BUFFER < 0x20 Bytes
//   -bit 17 vififo  < 16 double words
//   -bit 16 vififo  < 8 double words
// bit  [15:13] unused
// bit  [12]    A_urgent
// bit  [11]    transfer_length 0 - 32x64 Bits per request, 1 - 16x64 Bits per request
// bit  [10]    use_level       Set this bit to 1 to enable filling of the FIFO controlled by the buffer
//                              level control.  If this bit is 0, then use bit[1] to control the enabling of filling
// bit  [9]     Data Ready.     This bit is set when data can be popped
// bit  [8]     fill busy       This bit will be high when we're fetching data from the DDR memory
//                              To reset this module, set cntl_enable = 0, and then wait for busy = 0.
//                              After that you can pulse cntl_init to start over
// bit  [7]     init_with_cntl_init
// bit  [6]     reserved
// bits [5:3]   endian:         see $lib/rtl/ddr_endian.v
// bit  [2]     cntl_empty_en   Set to 1 to enable reading the DDR memory FIFO
//                              Set cntl_empty_en = cntl_fill_en = 0 when pulsing cntl_init
// bit  [1]     cntl_fill_en    Set to 1 to enable reading data from DDR memory
// bit  [0]     cntl_init:      After setting the read pointers, sizes, channel masks
//                              and read masks, set this bit to 1 and then to 0
//                              NOTE:  You don't need to pulse cntl_init if only the start address is
//                              being changed
#define VDEC2_VLD_MEM_VIFIFO_CONTROL               ((0x2c44  << 2) + 0xff620000)
// --------------------------------------------
// VIFIFO Buffer Level Manager
// --------------------------------------------
#define VDEC2_VLD_MEM_VIFIFO_WP                    ((0x2c45  << 2) + 0xff620000)
#define VDEC2_VLD_MEM_VIFIFO_RP                    ((0x2c46  << 2) + 0xff620000)
#define VDEC2_VLD_MEM_VIFIFO_LEVEL                 ((0x2c47  << 2) + 0xff620000)
//
// bit  [8]     use_parser_video2_wp
// bit  [7]     vbuf2_out_manual
// bit  [6]     vbuf_out_manual
// bit  [5]     empty (ReadOnly)
// bit  [4]     full (ReadOnly)
// bit  [3:2]   reserved
// bit  [1]     manual mode     Set to 1 for manual write pointer mode
// bit  [0]     Init            Set high then low after everything has been initialized
#define VDEC2_VLD_MEM_VIFIFO_BUF_CNTL              ((0x2c48  << 2) + 0xff620000)
// bit 31:16 -- drop_bytes
// bit 15:14 -- drop_status (Read-Only)
// bit 13:12 -- sync_match_position (Read-Only)
// bit 11:6 -- reserved
// bit 5:4 -- TIME_STAMP_NUMBER, 0-32bits, 1-64bits, 2-96bits, 3-128bits
// bit 3 -- stamp_soft_reset
// bit 2 -- TIME_STAMP_length_enable
// bit 1 -- TIME_STAMP_sync64_enable
// bit 0 -- TIME_STAMP_enable
#define VDEC2_VLD_TIME_STAMP_CNTL                  ((0x2c49  << 2) + 0xff620000)
// bit 31:0 -- TIME_STAMP_SYNC_CODE_0
#define VDEC2_VLD_TIME_STAMP_SYNC_0                ((0x2c4a  << 2) + 0xff620000)
// bit 31:0 -- TIME_STAMP_SYNC_CODE_1
#define VDEC2_VLD_TIME_STAMP_SYNC_1                ((0x2c4b  << 2) + 0xff620000)
// bit 31:0 TIME_STAMP_0
#define VDEC2_VLD_TIME_STAMP_0                     ((0x2c4c  << 2) + 0xff620000)
// bit 31:0 TIME_STAMP_1
#define VDEC2_VLD_TIME_STAMP_1                     ((0x2c4d  << 2) + 0xff620000)
// bit 31:0 TIME_STAMP_2
#define VDEC2_VLD_TIME_STAMP_2                     ((0x2c4e  << 2) + 0xff620000)
// bit 31:0 TIME_STAMP_3
#define VDEC2_VLD_TIME_STAMP_3                     ((0x2c4f  << 2) + 0xff620000)
// bit 31:0 TIME_STAMP_LENGTH
#define VDEC2_VLD_TIME_STAMP_LENGTH                ((0x2c50  << 2) + 0xff620000)
// bit 15:0 vififo_rd_count
#define VDEC2_VLD_MEM_VIFIFO_WRAP_COUNT            ((0x2c51  << 2) + 0xff620000)
// bit 29:24 A_brst_num
// bit 21:16 A_id
// bit 15:0 level_hold
#define VDEC2_VLD_MEM_VIFIFO_MEM_CTL               ((0x2c52  << 2) + 0xff620000)
#define VDEC2_VLD_MEM_VBUF_RD_PTR                  ((0x2c53  << 2) + 0xff620000)
#define VDEC2_VLD_MEM_VBUF2_RD_PTR                 ((0x2c54  << 2) + 0xff620000)
#define VDEC2_VLD_MEM_SWAP_ADDR                    ((0x2c55  << 2) + 0xff620000)
// bit[23:16] - swap_d_count (Read Only)
// bit[15:8]  - swap_a_count (Read Only)
// bit [7] - swap busy (Read Only)
// bit [6:2] - reserved
// bit [1] - 1 - STORE to Memory, 0 - LOAD from Memory
// bit [0] - swap active
#define VDEC2_VLD_MEM_SWAP_CTL                     ((0x2c56  << 2) + 0xff620000)
//
// Closing file:  vld_regs.h
//
//
// Reading file:  vld_regs.h
//
//========================================================================
//  VLD module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_VDEC_VLD_CBUS_BASE = 0x0c
// -----------------------------------------------
#define HEVC_VLD_STATUS_CTRL                       ((0x3c00  << 2) + 0xff620000)
//
// bit 10 -- use_old_shift_en
// bit 9 -- output_mv_not_pmv
// bit 8:5 -- force_zigzag
// bit 4 -- force_zigzag_en
// bit 3 -- disable_viff_anempty_int
// bit 2 -- disable_m2_ac_coeff_one_cycle
// bit 1 -- forced_reset  force reset pmv
// bit 0 -- mpeg_type  0:mpeg1 1: mpeg2
#define HEVC_MPEG1_2_REG                           ((0x3c01  << 2) + 0xff620000)
#define HEVC_F_CODE_REG                            ((0x3c02  << 2) + 0xff620000)
#define HEVC_PIC_HEAD_INFO                         ((0x3c03  << 2) + 0xff620000)
#define HEVC_SLICE_VER_POS_PIC_TYPE                ((0x3c04  << 2) + 0xff620000)
#define HEVC_QP_VALUE_REG                          ((0x3c05  << 2) + 0xff620000)
#define HEVC_MBA_INC                               ((0x3c06  << 2) + 0xff620000)
#define HEVC_MB_MOTION_MODE                        ((0x3c07  << 2) + 0xff620000)
//`define PACKET_BYTE_COUNT   8'h08
// bit 15 -- force_search_startcode_en
// bit 14 -- int_cpu_when_error (before do anything)
// bit 13 -- vld_error_reset
// bit 12 -- return_on_slice_header
// bit 6 -- jpeg_ff00_en
// bit 5:0 -- vld_power_ctl
#define HEVC_POWER_CTL_VLD                         ((0x3c08  << 2) + 0xff620000)
#define HEVC_MB_WIDTH                              ((0x3c09  << 2) + 0xff620000)
#define HEVC_SLICE_QP                              ((0x3c0a  << 2) + 0xff620000)
// `define MB_X_MB_Y           8'h0b   /* current MBX and MBY                  */
#define HEVC_PRE_START_CODE                        ((0x3c0b  << 2) + 0xff620000)
#define HEVC_SLICE_START_BYTE_01                   ((0x3c0c  << 2) + 0xff620000)
#define HEVC_SLICE_START_BYTE_23                   ((0x3c0d  << 2) + 0xff620000)
#define HEVC_RESYNC_MARKER_LENGTH                  ((0x3c0e  << 2) + 0xff620000)
// bit[6:5] - frame/field info, 01 - top, 10 - bottom, 11 - frame
// bit[4:0] - buffer ID
// L0_BUFF_ID_0, L0_BUFF_ID_1, L1_BUFF_ID_0, L1_BUFF_ID_1
#define HEVC_DECODER_BUFFER_INFO                   ((0x3c0f  << 2) + 0xff620000)
#define HEVC_FST_FOR_MV_X                          ((0x3c10  << 2) + 0xff620000)
#define HEVC_FST_FOR_MV_Y                          ((0x3c11  << 2) + 0xff620000)
#define HEVC_SCD_FOR_MV_X                          ((0x3c12  << 2) + 0xff620000)
#define HEVC_SCD_FOR_MV_Y                          ((0x3c13  << 2) + 0xff620000)
#define HEVC_FST_BAK_MV_X                          ((0x3c14  << 2) + 0xff620000)
#define HEVC_FST_BAK_MV_Y                          ((0x3c15  << 2) + 0xff620000)
#define HEVC_SCD_BAK_MV_X                          ((0x3c16  << 2) + 0xff620000)
#define HEVC_SCD_BAK_MV_Y                          ((0x3c17  << 2) + 0xff620000)
// Bit 7:4 -- read_buffer_interlace  0-progressive, 1-interlace, used in VC1
// bit 3 -- disable_new_stcode_search_fix // From GXM
// bit 2 -- weighting_prediction
// bit 1 -- mb_weighting_flag
// bit 0 -- slice_weighting_flag
#define HEVC_VLD_DECODE_CONTROL                    ((0x3c18  << 2) + 0xff620000)
#define HEVC_VLD_REVERVED_19                       ((0x3c19  << 2) + 0xff620000)
#define HEVC_VIFF_BIT_CNT                          ((0x3c1a  << 2) + 0xff620000)
#define HEVC_BYTE_ALIGN_PEAK_HI                    ((0x3c1b  << 2) + 0xff620000)
#define HEVC_BYTE_ALIGN_PEAK_LO                    ((0x3c1c  << 2) + 0xff620000)
#define HEVC_NEXT_ALIGN_PEAK                       ((0x3c1d  << 2) + 0xff620000)
// bit 31    : byte_aligned_zero_23_from_org // From GXM
// bit 30    : force_shift_out_drop_flag_zero // From GXM
// bit 29    : en_st_protect_from_org // From GXM
// bit 28    : enable_halt_decode_start_voff
// bit 27    : disable_C_pred_check
// bit 26    : disable_I4_pred_check
// bit 25    : disable_I16_pred_check
// bit 24    : check_avs_1st_drop
// bit 23    : enable_cabac_protect // From GXM
// bit 22    : enable_avs_drop_more
// bit 21    : reset_avs_drop_ptr
// bit 20    : reset_cabac_use_next_at_end_req
// bit 19    : vc1_inv_intra_co_mb_ref_rd
// bit 18    : vc1_inv_co_mb_ref_rd
// bit 17    : vc1_inv_intra_co_mb_ref_wr
// bit 16    : vc1_inv_co_mb_ref_wr
// bit 15    : disable_mv_cal_begin_only
// bit 14    : avs_drop_enable
// bit 13:12 : avs_drop_ptr
// bit 11:8  : avs_demu_ctl_reg
// bit 7 : avs_enable
// bit 6 : disable_dblk_hcmd
// bit 5 : disable_mc_hcmd
// bit 4 : first_mode3_set enable
// bit 3 : first_mode3
// bit 2:1 : vc1_profile  0-SP, 1-MP, 2-reserved, 3-AP
// bit 0   : vc1_enable
#define HEVC_VC1_CONTROL_REG                       ((0x3c1e  << 2) + 0xff620000)
#define HEVC_PMV1_X                                ((0x3c20  << 2) + 0xff620000)
#define HEVC_PMV1_Y                                ((0x3c21  << 2) + 0xff620000)
#define HEVC_PMV2_X                                ((0x3c22  << 2) + 0xff620000)
#define HEVC_PMV2_Y                                ((0x3c23  << 2) + 0xff620000)
#define HEVC_PMV3_X                                ((0x3c24  << 2) + 0xff620000)
#define HEVC_PMV3_Y                                ((0x3c25  << 2) + 0xff620000)
#define HEVC_PMV4_X                                ((0x3c26  << 2) + 0xff620000)
#define HEVC_PMV4_Y                                ((0x3c27  << 2) + 0xff620000)
// Can't use the same address for different defines
// Therefore, create a single define that covers both
// Only appears to be used in micro-code since the VLD hardware is
// hard coded.
// `define M4_TABLE_SELECT     8'h28  // Does this exist in HW ? Added from register_mp2.h
// `define M4_TABLE_OUTPUT     8'h28  // Does this exist in HW ? Added from register_mp2.h
#define HEVC_M4_TABLE_SELECT                       ((0x3c28  << 2) + 0xff620000)
#define HEVC_M4_CONTROL_REG                        ((0x3c29  << 2) + 0xff620000)
#define HEVC_BLOCK_NUM                             ((0x3c2a  << 2) + 0xff620000)
#define HEVC_PATTERN_CODE                          ((0x3c2b  << 2) + 0xff620000)
#define HEVC_MB_INFO                               ((0x3c2c  << 2) + 0xff620000)
#define HEVC_VLD_DC_PRED                           ((0x3c2d  << 2) + 0xff620000)
#define HEVC_VLD_ERROR_MASK                        ((0x3c2e  << 2) + 0xff620000)
#define HEVC_VLD_DC_PRED_C                         ((0x3c2f  << 2) + 0xff620000)
#define HEVC_LAST_SLICE_MV_ADDR                    ((0x3c30  << 2) + 0xff620000)
#define HEVC_LAST_MVX                              ((0x3c31  << 2) + 0xff620000)
#define HEVC_LAST_MVY                              ((0x3c32  << 2) + 0xff620000)
#define HEVC_VLD_C38                               ((0x3c38  << 2) + 0xff620000)
#define HEVC_VLD_C39                               ((0x3c39  << 2) + 0xff620000)
#define HEVC_VLD_STATUS                            ((0x3c3a  << 2) + 0xff620000)
#define HEVC_VLD_SHIFT_STATUS                      ((0x3c3b  << 2) + 0xff620000)
// `define VLD_SHIFT_INFO      8'h3b  // Does this exist in HW ? used in $ucode/mpeg4
#define HEVC_VOFF_STATUS                           ((0x3c3c  << 2) + 0xff620000)
#define HEVC_VLD_C3D                               ((0x3c3d  << 2) + 0xff620000)
#define HEVC_VLD_DBG_INDEX                         ((0x3c3e  << 2) + 0xff620000)
// vld_buff_info -- (index == 0)
// Bit11]    halt_decode_start_voff
// Bit10]    C_pred_error
// Bit[9]    I4_pred_error
// Bit[8]    I16_pred_error
// Bit[7:6]  mv_UR_ready_cnt;
// Bit[5]  vld_wr_idx
// Bit[4]  iq_rd_idx
// Bit[3]  vld_vi_block_rdy_1
// Bit[2]  vld_vi_block_rdy_2
// Bit[1]  voff_empty_1
// Bit[0]  voff_empty_2
// cabac_buff_info_0 -- (index == 1)
// Bit[31] shift_data_ready
// Bit[30:29] Reserved
// Bit[28:24] cabac_buffer_ptr
// Bit[23:0] cabac_buffer
// cabac_buff_info_1 -- (index == 2)
// Bit[31:29] Reserved
// Bit[28:20] Drange
// Bit[19:16] bin_count_4
// Bit[15:13] Reserved
// Bit[12:6] context_mem_do
// Bit[5:3] coeff_state
// Bit[2:0] mvd_state
// h264_mv_present -- (index == 3)
// Bit[31:16] mv_present_l0
// Bit[15:0] mv_present_l1
// h264_mv_cal_info_0 -- (index == 4)
// [31:28] mv_cal_state
// [27:24] direct_spatial_cnt
// Bit[23:21] Reserved
// Bit[20] mv_UR_ready_for_mv_cal
// Bit[19] co_mb_mem_ready_for_mv_cal
// Bit[18] mc_dblk_cmd_if_busy
// Bit[17] h264_co_mb_wr_busy
// Bit[16] H264_cbp_blk_ready
// Bit[15] mc_hcmd_rrdy
// Bit[14] mc_hcmd_srdy
// Bit[13] mc_cmd_if_ready
// Bit[12] mc_hcmd_mv_available
// Bit[11:8] mc_cmd_if_state
// Bit[7] dblk_hcmd_rrdy
// Bit[6] dblk_hcmd_srdy
// Bit[5] dblk_cmd_if_ready
// Bit[4] dblk_hcmd_mv_available
// Bit[3:0] dblk_cmd_if_state
// h264_mv_cal_info_1 -- (index == 5)
//  Bit[31:29] Reserved
//  Bit[28:24] total_mvd_num_l0
//  Bit[23:21] Reserved
//  Bit[20:16] mv_cal_ptr_l0
//  Bit[15:13] Reserved
//  Bit[12:8] mc_hcmd_ptr_l0
//  Bit[7:5] Reserved
//  Bit[4:0] dblk_hcmd_ptr_l0
// h264_mv_cal_info_2 -- (index == 6)
//  Bit[31:29] Reserved
//  Bit[28:24] total_mvd_num_l1
//  Bit[23:21] Reserved
//  Bit[20:16] mv_cal_ptr_l1
//  Bit[15:13] Reserved
//  Bit[12:8] mc_hcmd_ptr_l1
//  Bit[7:5] Reserved
//  Bit[4:0] dblk_hcmd_ptr_l1
// h264_co_mb_info -- (index == 7)
// Bit[31:26] Reserved
// Bit[25] mv_scale_cal_busy
// Bit[24:20] co_mv_count
// Bit[19:16] co_mv_process_state
// Bit[15] h264_co_mb_rd_busy
// Bit[15] h264_co_mb_rd_ready
// Bit[13:12] co_mv_transfer_block_cnt
// Bit[11:8] co_mv_transfer_ptr
// Bit[7] co_mv_POC_l1_busy
// Bit[6] h264_weight_scale_cal_en
// Bit[5] weight_cal_busy
// Bit[4] weight_cal_not_finished
// Bit[3:0] weight_process_state
#define HEVC_VLD_DBG_DATA                          ((0x3c3f  << 2) + 0xff620000)
// --------------------------------------------
// VIFIFO DDR Interface
// --------------------------------------------
// The VIFIFO start pointer into DDR memory is a 32-bit number
// The Start pointer will automatically be truncated to land on
// an 8-byte boundary.  That is, bits [2:0] = 0;
#define HEVC_VLD_MEM_VIFIFO_START_PTR              ((0x3c40  << 2) + 0xff620000)
// The current pointer points so some location between the START and END
// pointers.  The current pointer is a BYTE pointer.  That is, you can
// point to any BYTE address within the START/END range
#define HEVC_VLD_MEM_VIFIFO_CURR_PTR               ((0x3c41  << 2) + 0xff620000)
#define HEVC_VLD_MEM_VIFIFO_END_PTR                ((0x3c42  << 2) + 0xff620000)
#define HEVC_VLD_MEM_VIFIFO_BYTES_AVAIL            ((0x3c43  << 2) + 0xff620000)
// VIFIFO FIFO Control
// bit  [31:24] viff_empty_int_enable_cpu[7:0]
// bit  [23:16] viff_empty_int_enable_amrisc[7:0]
//   -bit 23 Video BUFFER < 0x400 Bytes
//   -bit 22 Video BUFFER < 0x200 Bytes
//   -bit 21 Video BUFFER < 0x100 Bytes
//   -bit 20 Video BUFFER < 0x80 Bytes
//   -bit 19 Video BUFFER < 0x40 Bytes
//   -bit 18 Video BUFFER < 0x20 Bytes
//   -bit 17 vififo  < 16 double words
//   -bit 16 vififo  < 8 double words
// bit  [15:13] unused
// bit  [12]    A_urgent
// bit  [11]    transfer_length 0 - 32x64 Bits per request, 1 - 16x64 Bits per request
// bit  [10]    use_level       Set this bit to 1 to enable filling of the FIFO controlled by the buffer
//                              level control.  If this bit is 0, then use bit[1] to control the enabling of filling
// bit  [9]     Data Ready.     This bit is set when data can be popped
// bit  [8]     fill busy       This bit will be high when we're fetching data from the DDR memory
//                              To reset this module, set cntl_enable = 0, and then wait for busy = 0.
//                              After that you can pulse cntl_init to start over
// bit  [7]     init_with_cntl_init
// bit  [6]     reserved
// bits [5:3]   endian:         see $lib/rtl/ddr_endian.v
// bit  [2]     cntl_empty_en   Set to 1 to enable reading the DDR memory FIFO
//                              Set cntl_empty_en = cntl_fill_en = 0 when pulsing cntl_init
// bit  [1]     cntl_fill_en    Set to 1 to enable reading data from DDR memory
// bit  [0]     cntl_init:      After setting the read pointers, sizes, channel masks
//                              and read masks, set this bit to 1 and then to 0
//                              NOTE:  You don't need to pulse cntl_init if only the start address is
//                              being changed
#define HEVC_VLD_MEM_VIFIFO_CONTROL                ((0x3c44  << 2) + 0xff620000)
// --------------------------------------------
// VIFIFO Buffer Level Manager
// --------------------------------------------
#define HEVC_VLD_MEM_VIFIFO_WP                     ((0x3c45  << 2) + 0xff620000)
#define HEVC_VLD_MEM_VIFIFO_RP                     ((0x3c46  << 2) + 0xff620000)
#define HEVC_VLD_MEM_VIFIFO_LEVEL                  ((0x3c47  << 2) + 0xff620000)
//
// bit  [8]     use_parser_video2_wp
// bit  [7]     vbuf2_out_manual
// bit  [6]     vbuf_out_manual
// bit  [5]     empty (ReadOnly)
// bit  [4]     full (ReadOnly)
// bit  [3:2]   reserved
// bit  [1]     manual mode     Set to 1 for manual write pointer mode
// bit  [0]     Init            Set high then low after everything has been initialized
#define HEVC_VLD_MEM_VIFIFO_BUF_CNTL               ((0x3c48  << 2) + 0xff620000)
// bit 31:16 -- drop_bytes
// bit 15:14 -- drop_status (Read-Only)
// bit 13:12 -- sync_match_position (Read-Only)
// bit 11:6 -- reserved
// bit 5:4 -- TIME_STAMP_NUMBER, 0-32bits, 1-64bits, 2-96bits, 3-128bits
// bit 3 -- stamp_soft_reset
// bit 2 -- TIME_STAMP_length_enable
// bit 1 -- TIME_STAMP_sync64_enable
// bit 0 -- TIME_STAMP_enable
#define HEVC_VLD_TIME_STAMP_CNTL                   ((0x3c49  << 2) + 0xff620000)
// bit 31:0 -- TIME_STAMP_SYNC_CODE_0
#define HEVC_VLD_TIME_STAMP_SYNC_0                 ((0x3c4a  << 2) + 0xff620000)
// bit 31:0 -- TIME_STAMP_SYNC_CODE_1
#define HEVC_VLD_TIME_STAMP_SYNC_1                 ((0x3c4b  << 2) + 0xff620000)
// bit 31:0 TIME_STAMP_0
#define HEVC_VLD_TIME_STAMP_0                      ((0x3c4c  << 2) + 0xff620000)
// bit 31:0 TIME_STAMP_1
#define HEVC_VLD_TIME_STAMP_1                      ((0x3c4d  << 2) + 0xff620000)
// bit 31:0 TIME_STAMP_2
#define HEVC_VLD_TIME_STAMP_2                      ((0x3c4e  << 2) + 0xff620000)
// bit 31:0 TIME_STAMP_3
#define HEVC_VLD_TIME_STAMP_3                      ((0x3c4f  << 2) + 0xff620000)
// bit 31:0 TIME_STAMP_LENGTH
#define HEVC_VLD_TIME_STAMP_LENGTH                 ((0x3c50  << 2) + 0xff620000)
// bit 15:0 vififo_rd_count
#define HEVC_VLD_MEM_VIFIFO_WRAP_COUNT             ((0x3c51  << 2) + 0xff620000)
// bit 29:24 A_brst_num
// bit 21:16 A_id
// bit 15:0 level_hold
#define HEVC_VLD_MEM_VIFIFO_MEM_CTL                ((0x3c52  << 2) + 0xff620000)
#define HEVC_VLD_MEM_VBUF_RD_PTR                   ((0x3c53  << 2) + 0xff620000)
#define HEVC_VLD_MEM_VBUF2_RD_PTR                  ((0x3c54  << 2) + 0xff620000)
#define HEVC_VLD_MEM_SWAP_ADDR                     ((0x3c55  << 2) + 0xff620000)
// bit[23:16] - swap_d_count (Read Only)
// bit[15:8]  - swap_a_count (Read Only)
// bit [7] - swap busy (Read Only)
// bit [6:2] - reserved
// bit [1] - 1 - STORE to Memory, 0 - LOAD from Memory
// bit [0] - swap active
#define HEVC_VLD_MEM_SWAP_CTL                      ((0x3c56  << 2) + 0xff620000)
//
// Closing file:  vld_regs.h
//
//
// Reading file:  iqidct_regs.h
//
//========================================================================
//  IQ/IDCT module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_VDEC_IQIDCT_CBUS_BASE = 0x0e
// -----------------------------------------------
#define HCODEC_VCOP_CTRL_REG                       ((0x1e00  << 2) + 0xff620000)
#define HCODEC_QP_CTRL_REG                         ((0x1e01  << 2) + 0xff620000)
#define HCODEC_INTRA_QUANT_MATRIX                  ((0x1e02  << 2) + 0xff620000)
#define HCODEC_NON_I_QUANT_MATRIX                  ((0x1e03  << 2) + 0xff620000)
#define HCODEC_DC_SCALER                           ((0x1e04  << 2) + 0xff620000)
#define HCODEC_DC_AC_CTRL                          ((0x1e05  << 2) + 0xff620000)
// `define RV_AI_CTRL          8'h05  // ONLY for $ucode/real/amrisc/rv.s reg value from apollo
#define HCODEC_DC_AC_SCALE_MUL                     ((0x1e06  << 2) + 0xff620000)
#define HCODEC_DC_AC_SCALE_DIV                     ((0x1e07  << 2) + 0xff620000)
// `define DC_AC_SCALE_RESULT  8'h06
// `define RESERVED_E07        8'h07
#define HCODEC_POWER_CTL_IQIDCT                    ((0x1e08  << 2) + 0xff620000)
#define HCODEC_RV_AI_Y_X                           ((0x1e09  << 2) + 0xff620000)
#define HCODEC_RV_AI_U_X                           ((0x1e0a  << 2) + 0xff620000)
#define HCODEC_RV_AI_V_X                           ((0x1e0b  << 2) + 0xff620000)
// bit 15:0 will count up when rv_ai_mb finished when non zero
// and rv_ai_mb_finished_int will be generate when this is not zero
#define HCODEC_RV_AI_MB_COUNT                      ((0x1e0c  << 2) + 0xff620000)
// For H264 I in PB picture Use -- dma type : h264_next_intra_dma
#define HCODEC_NEXT_INTRA_DMA_ADDRESS              ((0x1e0d  << 2) + 0xff620000)
// Bit 16 -- dcac_dma_read_cache_disable
// Bit 15 -- dcac_dma_urgent
// Bit 14 -- nv21_swap
// Bit 13 -- nv21_top_dma
// Bit 12 -- reset_rv_ai_wait_rd_data
// Bit 11 -- set_rv_ai_wait_rd_data [12:11] = 3 means only dec 1 (For Skipped MB of MBAFF)
// Bit 10 -- rv_ai_wait_rd_data (Read Only)
// Bit 9 -- enable_rv_ai_wait_rd_data
// Bit 8 -- disable_vc1_mv_update
// Bit 7 -- pred_dc_signed
// Bit 6 -- inc_vld_ready_count
// Bit 5 -- dec_vld_ready_count
// Bit 4 -- disable_ref_bidir_fix
// Bit 3 -- disable_MV_UL_l1_bot_fix
// Bit 2 -- disable_mb_aff_fix
// Bit 1 -- canvas_addr_7
// Bit 0 -- constrained_intra_pred_flag for H264
#define HCODEC_IQIDCT_CONTROL                      ((0x1e0e  << 2) + 0xff620000)
// Bit[31:19] Reserved
// Bit[18] iq_waiting
// Bit[17] iq_om_wr_idx
// Bit[16] iq_om_rd_idx
// Bit[15] iq_om_busy
// Bit[14] iq_om_2_busy
// Bit[13] idx_fifo_0
// Bit[12] idx_fifo_1
// Bit[11] idx_fifo_2
// Bit[10] idx_fifo_3
// Bit[9] idx_fifo_4
// Bit[8] idx_fifo_5
// Bit[7] idx_fifo_6
// Bit[6] idx_fifo_7
// Bit[5:3] idx_fifo_wp
// Bit[2:0] idx_fifo_rp
#define HCODEC_IQIDCT_DEBUG_INFO_0                 ((0x1e0f  << 2) + 0xff620000)
// For RTL Simulation Only
#define HCODEC_DEBLK_CMD                           ((0x1e10  << 2) + 0xff620000)
// Bit[15+16] ds_mc_valid_2
// Bit[14+16] new_idct1_rd_idx_2
// Bit[13+16] new_idct1_wr_idx_2
// Bit[12+16] idct1_buff0_busy_2
// Bit[11+16] idct1_buff1_busy_2
// Bit[10+16] new_idct1_busy_2
// Bit[9+16] iq_om_8val_2
// Bit[8+16] idct1_pipe_busy_2
// Bit[7+16] wait_mb_left_finish_hold_2
// Bit[6+16] new_idct2_rd_idx_2
// Bit[5+16] new_idct2_wr_idx_2
// Bit[4+16] idct2_buff0_busy_2
// Bit[3+16] idct2_buff1_busy_2
// Bit[2+16] idct2_en_2
// Bit[1+16] new_idct2_busy_2
// Bit[0+16] new_idct1_ready_2
// Bit[15] ds_mc_valid_1
// Bit[14] new_idct1_rd_idx_1
// Bit[13] new_idct1_wr_idx_1
// Bit[12] idct1_buff0_busy_1
// Bit[11] idct1_buff1_busy_1
// Bit[10] new_idct1_busy_1
// Bit[9] iq_om_8val_1
// Bit[8] idct1_pipe_busy_1
// Bit[7] wait_mb_left_finish_hold_1
// Bit[6] new_idct2_rd_idx_1
// Bit[5] new_idct2_wr_idx_1
// Bit[4] idct2_buff0_busy_1
// Bit[3] idct2_buff1_busy_1
// Bit[2] idct2_en_1
// Bit[1] new_idct2_busy_1
// Bit[0] new_idct1_ready_1
#define HCODEC_IQIDCT_DEBUG_IDCT                   ((0x1e11  << 2) + 0xff620000)
// bit 31 -- convas_enable
// bit 30:24 -- convas_x_count ( 8 pixels / 64 bits )
// bit 23:16 -- convas_y_count
// bit 15   -- dcac_dma_busy
// bit 14   -- dcac_dma_read_cache_active
// bit 13:8 -- dcac_dma_count
// bit 7    -- dcac_dma_rw
// bit 6    -- dcac_skip_read_mode
// bit 5:0  -- dcac_dma_offset
#define HCODEC_DCAC_DMA_CTRL                       ((0x1e12  << 2) + 0xff620000)
// when (convas_enable == 0 )
//   bit 31:0 dcac_dma_addr
// when (convas_enable == 1 )
//   bit 31:25 canvas_addr (7 bits)
//   bit 24:12 convas_y_start ( 13 btis )
//   bit 11:0  convas_x_start ( 12 btis )
#define HCODEC_DCAC_DMA_ADDRESS                    ((0x1e13  << 2) + 0xff620000)
// bit 7:0 -- dcac_cpu_addr
#define HCODEC_DCAC_CPU_ADDRESS                    ((0x1e14  << 2) + 0xff620000)
// bit 31:0 -- dcac_cpu_data
#define HCODEC_DCAC_CPU_DATA                       ((0x1e15  << 2) + 0xff620000)
// bit 31:19 -- reserved
// bit 18:16 -- block_num_reg -- Read-Only
// bit 15:0 -- dcac_mb_count
#define HCODEC_DCAC_MB_COUNT                       ((0x1e16  << 2) + 0xff620000)
// bit 31:18 -- reserved
// For H264 :
//   bit 17:2 -- h264_quant
//   bit 11:6 -- h264_quant_c
//   bit  5:0 -- h264_quant_c
// For VC1 :
//   bit    17 -- qindex_GT_8
//   bit    16 -- HalfQPStep
//   bit 15:12 -- eQuantMode
//   bit 11:6  -- AltPQuant
//   bit  5:0  -- PQuant
//
#define HCODEC_IQ_QUANT                            ((0x1e17  << 2) + 0xff620000)
// bit 31:24  -- bitplane_width
// bit 23:16  -- bitplane_height
// bit 15:14  -- bitplane_start_x
// bit 13:12  -- bitplane_start_y
// bit 11:4   -- reserved
// bit 3:1    -- bitplane_type
// bit 0      -- bitplane_busy
#define HCODEC_VC1_BITPLANE_CTL                    ((0x1e18  << 2) + 0xff620000)
// bit 24:16  -- wq_param1
// bit  8: 0  -- wq_param0
#define HCODEC_AVSP_IQ_WQ_PARAM_01                 ((0x1e19  << 2) + 0xff620000)
// bit 24:16  -- wq_param3
// bit  8: 0  -- wq_param2
#define HCODEC_AVSP_IQ_WQ_PARAM_23                 ((0x1e1a  << 2) + 0xff620000)
// bit 24:16  -- wq_param5
// bit  8: 0  -- wq_param4
#define HCODEC_AVSP_IQ_WQ_PARAM_45                 ((0x1e1b  << 2) + 0xff620000)
// bit    31  -- weight_quant_en
// bit 17:16  -- current_scene_model
// bit 12: 8  -- chroma_qp_delta_cr
// bit  4: 0  -- chroma_qp_delta_cb
#define HCODEC_AVSP_IQ_CTL                         ((0x1e1c  << 2) + 0xff620000)
//======================================
//  VCOP Control Register Bits
//
//======================================
    //`define IQIDCT_RESET	    16'h0001	    // Bit 0
//======================================
//  QP Control Register Bits
//
//======================================
// Duplicate Address:  When actually used
// please move to a different address
// `define FLD_DCT_TYPE	    16'h0100	    // Bit 8	0 = Frame DCT; 1 = field DCT
//
// Closing file:  iqidct_regs.h
//
//
// Reading file:  iqidct_regs.h
//
//========================================================================
//  IQ/IDCT module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_VDEC_IQIDCT_CBUS_BASE = 0x0e
// -----------------------------------------------
#define VDEC2_VCOP_CTRL_REG                        ((0x2e00  << 2) + 0xff620000)
#define VDEC2_QP_CTRL_REG                          ((0x2e01  << 2) + 0xff620000)
#define VDEC2_INTRA_QUANT_MATRIX                   ((0x2e02  << 2) + 0xff620000)
#define VDEC2_NON_I_QUANT_MATRIX                   ((0x2e03  << 2) + 0xff620000)
#define VDEC2_DC_SCALER                            ((0x2e04  << 2) + 0xff620000)
#define VDEC2_DC_AC_CTRL                           ((0x2e05  << 2) + 0xff620000)
// `define RV_AI_CTRL          8'h05  // ONLY for $ucode/real/amrisc/rv.s reg value from apollo
#define VDEC2_DC_AC_SCALE_MUL                      ((0x2e06  << 2) + 0xff620000)
#define VDEC2_DC_AC_SCALE_DIV                      ((0x2e07  << 2) + 0xff620000)
// `define DC_AC_SCALE_RESULT  8'h06
// `define RESERVED_E07        8'h07
#define VDEC2_POWER_CTL_IQIDCT                     ((0x2e08  << 2) + 0xff620000)
#define VDEC2_RV_AI_Y_X                            ((0x2e09  << 2) + 0xff620000)
#define VDEC2_RV_AI_U_X                            ((0x2e0a  << 2) + 0xff620000)
#define VDEC2_RV_AI_V_X                            ((0x2e0b  << 2) + 0xff620000)
// bit 15:0 will count up when rv_ai_mb finished when non zero
// and rv_ai_mb_finished_int will be generate when this is not zero
#define VDEC2_RV_AI_MB_COUNT                       ((0x2e0c  << 2) + 0xff620000)
// For H264 I in PB picture Use -- dma type : h264_next_intra_dma
#define VDEC2_NEXT_INTRA_DMA_ADDRESS               ((0x2e0d  << 2) + 0xff620000)
// Bit 16 -- dcac_dma_read_cache_disable
// Bit 15 -- dcac_dma_urgent
// Bit 14 -- nv21_swap
// Bit 13 -- nv21_top_dma
// Bit 12 -- reset_rv_ai_wait_rd_data
// Bit 11 -- set_rv_ai_wait_rd_data [12:11] = 3 means only dec 1 (For Skipped MB of MBAFF)
// Bit 10 -- rv_ai_wait_rd_data (Read Only)
// Bit 9 -- enable_rv_ai_wait_rd_data
// Bit 8 -- disable_vc1_mv_update
// Bit 7 -- pred_dc_signed
// Bit 6 -- inc_vld_ready_count
// Bit 5 -- dec_vld_ready_count
// Bit 4 -- disable_ref_bidir_fix
// Bit 3 -- disable_MV_UL_l1_bot_fix
// Bit 2 -- disable_mb_aff_fix
// Bit 1 -- canvas_addr_7
// Bit 0 -- constrained_intra_pred_flag for H264
#define VDEC2_IQIDCT_CONTROL                       ((0x2e0e  << 2) + 0xff620000)
// Bit[31:19] Reserved
// Bit[18] iq_waiting
// Bit[17] iq_om_wr_idx
// Bit[16] iq_om_rd_idx
// Bit[15] iq_om_busy
// Bit[14] iq_om_2_busy
// Bit[13] idx_fifo_0
// Bit[12] idx_fifo_1
// Bit[11] idx_fifo_2
// Bit[10] idx_fifo_3
// Bit[9] idx_fifo_4
// Bit[8] idx_fifo_5
// Bit[7] idx_fifo_6
// Bit[6] idx_fifo_7
// Bit[5:3] idx_fifo_wp
// Bit[2:0] idx_fifo_rp
#define VDEC2_IQIDCT_DEBUG_INFO_0                  ((0x2e0f  << 2) + 0xff620000)
// For RTL Simulation Only
#define VDEC2_DEBLK_CMD                            ((0x2e10  << 2) + 0xff620000)
// Bit[15+16] ds_mc_valid_2
// Bit[14+16] new_idct1_rd_idx_2
// Bit[13+16] new_idct1_wr_idx_2
// Bit[12+16] idct1_buff0_busy_2
// Bit[11+16] idct1_buff1_busy_2
// Bit[10+16] new_idct1_busy_2
// Bit[9+16] iq_om_8val_2
// Bit[8+16] idct1_pipe_busy_2
// Bit[7+16] wait_mb_left_finish_hold_2
// Bit[6+16] new_idct2_rd_idx_2
// Bit[5+16] new_idct2_wr_idx_2
// Bit[4+16] idct2_buff0_busy_2
// Bit[3+16] idct2_buff1_busy_2
// Bit[2+16] idct2_en_2
// Bit[1+16] new_idct2_busy_2
// Bit[0+16] new_idct1_ready_2
// Bit[15] ds_mc_valid_1
// Bit[14] new_idct1_rd_idx_1
// Bit[13] new_idct1_wr_idx_1
// Bit[12] idct1_buff0_busy_1
// Bit[11] idct1_buff1_busy_1
// Bit[10] new_idct1_busy_1
// Bit[9] iq_om_8val_1
// Bit[8] idct1_pipe_busy_1
// Bit[7] wait_mb_left_finish_hold_1
// Bit[6] new_idct2_rd_idx_1
// Bit[5] new_idct2_wr_idx_1
// Bit[4] idct2_buff0_busy_1
// Bit[3] idct2_buff1_busy_1
// Bit[2] idct2_en_1
// Bit[1] new_idct2_busy_1
// Bit[0] new_idct1_ready_1
#define VDEC2_IQIDCT_DEBUG_IDCT                    ((0x2e11  << 2) + 0xff620000)
// bit 31 -- convas_enable
// bit 30:24 -- convas_x_count ( 8 pixels / 64 bits )
// bit 23:16 -- convas_y_count
// bit 15   -- dcac_dma_busy
// bit 14   -- dcac_dma_read_cache_active
// bit 13:8 -- dcac_dma_count
// bit 7    -- dcac_dma_rw
// bit 6    -- dcac_skip_read_mode
// bit 5:0  -- dcac_dma_offset
#define VDEC2_DCAC_DMA_CTRL                        ((0x2e12  << 2) + 0xff620000)
// when (convas_enable == 0 )
//   bit 31:0 dcac_dma_addr
// when (convas_enable == 1 )
//   bit 31:25 canvas_addr (7 bits)
//   bit 24:12 convas_y_start ( 13 btis )
//   bit 11:0  convas_x_start ( 12 btis )
#define VDEC2_DCAC_DMA_ADDRESS                     ((0x2e13  << 2) + 0xff620000)
// bit 7:0 -- dcac_cpu_addr
#define VDEC2_DCAC_CPU_ADDRESS                     ((0x2e14  << 2) + 0xff620000)
// bit 31:0 -- dcac_cpu_data
#define VDEC2_DCAC_CPU_DATA                        ((0x2e15  << 2) + 0xff620000)
// bit 31:19 -- reserved
// bit 18:16 -- block_num_reg -- Read-Only
// bit 15:0 -- dcac_mb_count
#define VDEC2_DCAC_MB_COUNT                        ((0x2e16  << 2) + 0xff620000)
// bit 31:18 -- reserved
// For H264 :
//   bit 17:2 -- h264_quant
//   bit 11:6 -- h264_quant_c
//   bit  5:0 -- h264_quant_c
// For VC1 :
//   bit    17 -- qindex_GT_8
//   bit    16 -- HalfQPStep
//   bit 15:12 -- eQuantMode
//   bit 11:6  -- AltPQuant
//   bit  5:0  -- PQuant
//
#define VDEC2_IQ_QUANT                             ((0x2e17  << 2) + 0xff620000)
// bit 31:24  -- bitplane_width
// bit 23:16  -- bitplane_height
// bit 15:14  -- bitplane_start_x
// bit 13:12  -- bitplane_start_y
// bit 11:4   -- reserved
// bit 3:1    -- bitplane_type
// bit 0      -- bitplane_busy
#define VDEC2_VC1_BITPLANE_CTL                     ((0x2e18  << 2) + 0xff620000)
// bit 24:16  -- wq_param1
// bit  8: 0  -- wq_param0
#define VDEC2_AVSP_IQ_WQ_PARAM_01                  ((0x2e19  << 2) + 0xff620000)
// bit 24:16  -- wq_param3
// bit  8: 0  -- wq_param2
#define VDEC2_AVSP_IQ_WQ_PARAM_23                  ((0x2e1a  << 2) + 0xff620000)
// bit 24:16  -- wq_param5
// bit  8: 0  -- wq_param4
#define VDEC2_AVSP_IQ_WQ_PARAM_45                  ((0x2e1b  << 2) + 0xff620000)
// bit    31  -- weight_quant_en
// bit 17:16  -- current_scene_model
// bit 12: 8  -- chroma_qp_delta_cr
// bit  4: 0  -- chroma_qp_delta_cb
#define VDEC2_AVSP_IQ_CTL                          ((0x2e1c  << 2) + 0xff620000)
//======================================
//  VCOP Control Register Bits
//
//======================================
    //`define IQIDCT_RESET	    16'h0001	    // Bit 0
//======================================
//  QP Control Register Bits
//
//======================================
// Duplicate Address:  When actually used
// please move to a different address
// `define FLD_DCT_TYPE	    16'h0100	    // Bit 8	0 = Frame DCT; 1 = field DCT
//
// Closing file:  iqidct_regs.h
//
//
// Reading file:  iqidct_regs.h
//
//========================================================================
//  IQ/IDCT module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_VDEC_IQIDCT_CBUS_BASE = 0x0e
// -----------------------------------------------
#define HEVC_VCOP_CTRL_REG                         ((0x3e00  << 2) + 0xff620000)
#define HEVC_QP_CTRL_REG                           ((0x3e01  << 2) + 0xff620000)
#define HEVC_INTRA_QUANT_MATRIX                    ((0x3e02  << 2) + 0xff620000)
#define HEVC_NON_I_QUANT_MATRIX                    ((0x3e03  << 2) + 0xff620000)
#define HEVC_DC_SCALER                             ((0x3e04  << 2) + 0xff620000)
#define HEVC_DC_AC_CTRL                            ((0x3e05  << 2) + 0xff620000)
// `define RV_AI_CTRL          8'h05  // ONLY for $ucode/real/amrisc/rv.s reg value from apollo
#define HEVC_DC_AC_SCALE_MUL                       ((0x3e06  << 2) + 0xff620000)
#define HEVC_DC_AC_SCALE_DIV                       ((0x3e07  << 2) + 0xff620000)
// `define DC_AC_SCALE_RESULT  8'h06
// `define RESERVED_E07        8'h07
#define HEVC_POWER_CTL_IQIDCT                      ((0x3e08  << 2) + 0xff620000)
#define HEVC_RV_AI_Y_X                             ((0x3e09  << 2) + 0xff620000)
#define HEVC_RV_AI_U_X                             ((0x3e0a  << 2) + 0xff620000)
#define HEVC_RV_AI_V_X                             ((0x3e0b  << 2) + 0xff620000)
// bit 15:0 will count up when rv_ai_mb finished when non zero
// and rv_ai_mb_finished_int will be generate when this is not zero
#define HEVC_RV_AI_MB_COUNT                        ((0x3e0c  << 2) + 0xff620000)
// For H264 I in PB picture Use -- dma type : h264_next_intra_dma
#define HEVC_NEXT_INTRA_DMA_ADDRESS                ((0x3e0d  << 2) + 0xff620000)
// Bit 16 -- dcac_dma_read_cache_disable
// Bit 15 -- dcac_dma_urgent
// Bit 14 -- nv21_swap
// Bit 13 -- nv21_top_dma
// Bit 12 -- reset_rv_ai_wait_rd_data
// Bit 11 -- set_rv_ai_wait_rd_data [12:11] = 3 means only dec 1 (For Skipped MB of MBAFF)
// Bit 10 -- rv_ai_wait_rd_data (Read Only)
// Bit 9 -- enable_rv_ai_wait_rd_data
// Bit 8 -- disable_vc1_mv_update
// Bit 7 -- pred_dc_signed
// Bit 6 -- inc_vld_ready_count
// Bit 5 -- dec_vld_ready_count
// Bit 4 -- disable_ref_bidir_fix
// Bit 3 -- disable_MV_UL_l1_bot_fix
// Bit 2 -- disable_mb_aff_fix
// Bit 1 -- canvas_addr_7
// Bit 0 -- constrained_intra_pred_flag for H264
#define HEVC_IQIDCT_CONTROL                        ((0x3e0e  << 2) + 0xff620000)
// Bit[31:19] Reserved
// Bit[18] iq_waiting
// Bit[17] iq_om_wr_idx
// Bit[16] iq_om_rd_idx
// Bit[15] iq_om_busy
// Bit[14] iq_om_2_busy
// Bit[13] idx_fifo_0
// Bit[12] idx_fifo_1
// Bit[11] idx_fifo_2
// Bit[10] idx_fifo_3
// Bit[9] idx_fifo_4
// Bit[8] idx_fifo_5
// Bit[7] idx_fifo_6
// Bit[6] idx_fifo_7
// Bit[5:3] idx_fifo_wp
// Bit[2:0] idx_fifo_rp
#define HEVC_IQIDCT_DEBUG_INFO_0                   ((0x3e0f  << 2) + 0xff620000)
// For RTL Simulation Only
#define HEVC_DEBLK_CMD                             ((0x3e10  << 2) + 0xff620000)
// Bit[15+16] ds_mc_valid_2
// Bit[14+16] new_idct1_rd_idx_2
// Bit[13+16] new_idct1_wr_idx_2
// Bit[12+16] idct1_buff0_busy_2
// Bit[11+16] idct1_buff1_busy_2
// Bit[10+16] new_idct1_busy_2
// Bit[9+16] iq_om_8val_2
// Bit[8+16] idct1_pipe_busy_2
// Bit[7+16] wait_mb_left_finish_hold_2
// Bit[6+16] new_idct2_rd_idx_2
// Bit[5+16] new_idct2_wr_idx_2
// Bit[4+16] idct2_buff0_busy_2
// Bit[3+16] idct2_buff1_busy_2
// Bit[2+16] idct2_en_2
// Bit[1+16] new_idct2_busy_2
// Bit[0+16] new_idct1_ready_2
// Bit[15] ds_mc_valid_1
// Bit[14] new_idct1_rd_idx_1
// Bit[13] new_idct1_wr_idx_1
// Bit[12] idct1_buff0_busy_1
// Bit[11] idct1_buff1_busy_1
// Bit[10] new_idct1_busy_1
// Bit[9] iq_om_8val_1
// Bit[8] idct1_pipe_busy_1
// Bit[7] wait_mb_left_finish_hold_1
// Bit[6] new_idct2_rd_idx_1
// Bit[5] new_idct2_wr_idx_1
// Bit[4] idct2_buff0_busy_1
// Bit[3] idct2_buff1_busy_1
// Bit[2] idct2_en_1
// Bit[1] new_idct2_busy_1
// Bit[0] new_idct1_ready_1
#define HEVC_IQIDCT_DEBUG_IDCT                     ((0x3e11  << 2) + 0xff620000)
// bit 31 -- convas_enable
// bit 30:24 -- convas_x_count ( 8 pixels / 64 bits )
// bit 23:16 -- convas_y_count
// bit 15   -- dcac_dma_busy
// bit 14   -- dcac_dma_read_cache_active
// bit 13:8 -- dcac_dma_count
// bit 7    -- dcac_dma_rw
// bit 6    -- dcac_skip_read_mode
// bit 5:0  -- dcac_dma_offset
#define HEVC_DCAC_DMA_CTRL                         ((0x3e12  << 2) + 0xff620000)
// when (convas_enable == 0 )
//   bit 31:0 dcac_dma_addr
// when (convas_enable == 1 )
//   bit 31:25 canvas_addr (7 bits)
//   bit 24:12 convas_y_start ( 13 btis )
//   bit 11:0  convas_x_start ( 12 btis )
#define HEVC_DCAC_DMA_ADDRESS                      ((0x3e13  << 2) + 0xff620000)
// bit 7:0 -- dcac_cpu_addr
#define HEVC_DCAC_CPU_ADDRESS                      ((0x3e14  << 2) + 0xff620000)
// bit 31:0 -- dcac_cpu_data
#define HEVC_DCAC_CPU_DATA                         ((0x3e15  << 2) + 0xff620000)
// bit 31:19 -- reserved
// bit 18:16 -- block_num_reg -- Read-Only
// bit 15:0 -- dcac_mb_count
#define HEVC_DCAC_MB_COUNT                         ((0x3e16  << 2) + 0xff620000)
// bit 31:18 -- reserved
// For H264 :
//   bit 17:2 -- h264_quant
//   bit 11:6 -- h264_quant_c
//   bit  5:0 -- h264_quant_c
// For VC1 :
//   bit    17 -- qindex_GT_8
//   bit    16 -- HalfQPStep
//   bit 15:12 -- eQuantMode
//   bit 11:6  -- AltPQuant
//   bit  5:0  -- PQuant
//
#define HEVC_IQ_QUANT                              ((0x3e17  << 2) + 0xff620000)
// bit 31:24  -- bitplane_width
// bit 23:16  -- bitplane_height
// bit 15:14  -- bitplane_start_x
// bit 13:12  -- bitplane_start_y
// bit 11:4   -- reserved
// bit 3:1    -- bitplane_type
// bit 0      -- bitplane_busy
#define HEVC_VC1_BITPLANE_CTL                      ((0x3e18  << 2) + 0xff620000)
// bit 24:16  -- wq_param1
// bit  8: 0  -- wq_param0
#define HEVC_AVSP_IQ_WQ_PARAM_01                   ((0x3e19  << 2) + 0xff620000)
// bit 24:16  -- wq_param3
// bit  8: 0  -- wq_param2
#define HEVC_AVSP_IQ_WQ_PARAM_23                   ((0x3e1a  << 2) + 0xff620000)
// bit 24:16  -- wq_param5
// bit  8: 0  -- wq_param4
#define HEVC_AVSP_IQ_WQ_PARAM_45                   ((0x3e1b  << 2) + 0xff620000)
// bit    31  -- weight_quant_en
// bit 17:16  -- current_scene_model
// bit 12: 8  -- chroma_qp_delta_cr
// bit  4: 0  -- chroma_qp_delta_cb
#define HEVC_AVSP_IQ_CTL                           ((0x3e1c  << 2) + 0xff620000)
//======================================
//  VCOP Control Register Bits
//
//======================================
    //`define IQIDCT_RESET	    16'h0001	    // Bit 0
//======================================
//  QP Control Register Bits
//
//======================================
// Duplicate Address:  When actually used
// please move to a different address
// `define FLD_DCT_TYPE	    16'h0100	    // Bit 8	0 = Frame DCT; 1 = field DCT
//
// Closing file:  iqidct_regs.h
//
//
// Reading file:  vcpu_regs.h
//
//========================================================================
//  VCPU module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_VDEC_VCPU_CBUS_BASE = 0x03
// -----------------------------------------------
#define HCODEC_MSP                                 ((0x1300  << 2) + 0xff620000)
#define HCODEC_MPSR                                ((0x1301  << 2) + 0xff620000)
#define HCODEC_MINT_VEC_BASE                       ((0x1302  << 2) + 0xff620000)
#define HCODEC_MCPU_INTR_GRP                       ((0x1303  << 2) + 0xff620000)
#define HCODEC_MCPU_INTR_MSK                       ((0x1304  << 2) + 0xff620000)
#define HCODEC_MCPU_INTR_REQ                       ((0x1305  << 2) + 0xff620000)
#define HCODEC_MPC_P                               ((0x1306  << 2) + 0xff620000)
#define HCODEC_MPC_D                               ((0x1307  << 2) + 0xff620000)
#define HCODEC_MPC_E                               ((0x1308  << 2) + 0xff620000)
#define HCODEC_MPC_W                               ((0x1309  << 2) + 0xff620000)
#define HCODEC_MINDEX0_REG                         ((0x130a  << 2) + 0xff620000)
#define HCODEC_MINDEX1_REG                         ((0x130b  << 2) + 0xff620000)
#define HCODEC_MINDEX2_REG                         ((0x130c  << 2) + 0xff620000)
#define HCODEC_MINDEX3_REG                         ((0x130d  << 2) + 0xff620000)
#define HCODEC_MINDEX4_REG                         ((0x130e  << 2) + 0xff620000)
#define HCODEC_MINDEX5_REG                         ((0x130f  << 2) + 0xff620000)
#define HCODEC_MINDEX6_REG                         ((0x1310  << 2) + 0xff620000)
#define HCODEC_MINDEX7_REG                         ((0x1311  << 2) + 0xff620000)
#define HCODEC_MMIN_REG                            ((0x1312  << 2) + 0xff620000)
#define HCODEC_MMAX_REG                            ((0x1313  << 2) + 0xff620000)
#define HCODEC_MBREAK0_REG                         ((0x1314  << 2) + 0xff620000)
#define HCODEC_MBREAK1_REG                         ((0x1315  << 2) + 0xff620000)
#define HCODEC_MBREAK2_REG                         ((0x1316  << 2) + 0xff620000)
#define HCODEC_MBREAK3_REG                         ((0x1317  << 2) + 0xff620000)
#define HCODEC_MBREAK_TYPE                         ((0x1318  << 2) + 0xff620000)
#define HCODEC_MBREAK_CTRL                         ((0x1319  << 2) + 0xff620000)
#define HCODEC_MBREAK_STAUTS                       ((0x131a  << 2) + 0xff620000)
#define HCODEC_MDB_ADDR_REG                        ((0x131b  << 2) + 0xff620000)
#define HCODEC_MDB_DATA_REG                        ((0x131c  << 2) + 0xff620000)
#define HCODEC_MDB_CTRL                            ((0x131d  << 2) + 0xff620000)
#define HCODEC_MSFTINT0                            ((0x131e  << 2) + 0xff620000)
#define HCODEC_MSFTINT1                            ((0x131f  << 2) + 0xff620000)
#define HCODEC_CSP                                 ((0x1320  << 2) + 0xff620000)
#define HCODEC_CPSR                                ((0x1321  << 2) + 0xff620000)
#define HCODEC_CINT_VEC_BASE                       ((0x1322  << 2) + 0xff620000)
#define HCODEC_CCPU_INTR_GRP                       ((0x1323  << 2) + 0xff620000)
#define HCODEC_CCPU_INTR_MSK                       ((0x1324  << 2) + 0xff620000)
#define HCODEC_CCPU_INTR_REQ                       ((0x1325  << 2) + 0xff620000)
#define HCODEC_CPC_P                               ((0x1326  << 2) + 0xff620000)
#define HCODEC_CPC_D                               ((0x1327  << 2) + 0xff620000)
#define HCODEC_CPC_E                               ((0x1328  << 2) + 0xff620000)
#define HCODEC_CPC_W                               ((0x1329  << 2) + 0xff620000)
#define HCODEC_CINDEX0_REG                         ((0x132a  << 2) + 0xff620000)
#define HCODEC_CINDEX1_REG                         ((0x132b  << 2) + 0xff620000)
#define HCODEC_CINDEX2_REG                         ((0x132c  << 2) + 0xff620000)
#define HCODEC_CINDEX3_REG                         ((0x132d  << 2) + 0xff620000)
#define HCODEC_CINDEX4_REG                         ((0x132e  << 2) + 0xff620000)
#define HCODEC_CINDEX5_REG                         ((0x132f  << 2) + 0xff620000)
#define HCODEC_CINDEX6_REG                         ((0x1330  << 2) + 0xff620000)
#define HCODEC_CINDEX7_REG                         ((0x1331  << 2) + 0xff620000)
#define HCODEC_CMIN_REG                            ((0x1332  << 2) + 0xff620000)
#define HCODEC_CMAX_REG                            ((0x1333  << 2) + 0xff620000)
#define HCODEC_CBREAK0_REG                         ((0x1334  << 2) + 0xff620000)
#define HCODEC_CBREAK1_REG                         ((0x1335  << 2) + 0xff620000)
#define HCODEC_CBREAK2_REG                         ((0x1336  << 2) + 0xff620000)
#define HCODEC_CBREAK3_REG                         ((0x1337  << 2) + 0xff620000)
#define HCODEC_CBREAK_TYPE                         ((0x1338  << 2) + 0xff620000)
#define HCODEC_CBREAK_CTRL                         ((0x1339  << 2) + 0xff620000)
#define HCODEC_CBREAK_STAUTS                       ((0x133a  << 2) + 0xff620000)
#define HCODEC_CDB_ADDR_REG                        ((0x133b  << 2) + 0xff620000)
#define HCODEC_CDB_DATA_REG                        ((0x133c  << 2) + 0xff620000)
#define HCODEC_CDB_CTRL                            ((0x133d  << 2) + 0xff620000)
#define HCODEC_CSFTINT0                            ((0x133e  << 2) + 0xff620000)
#define HCODEC_CSFTINT1                            ((0x133f  << 2) + 0xff620000)
#define HCODEC_IMEM_DMA_CTRL                       ((0x1340  << 2) + 0xff620000)
#define HCODEC_IMEM_DMA_ADR                        ((0x1341  << 2) + 0xff620000)
#define HCODEC_IMEM_DMA_COUNT                      ((0x1342  << 2) + 0xff620000)
// bit[29:24] A_brst_num_imem
// bit[21:16] A_id_imem
// bit[11:0] wrrsp_count_imem (reserved)
#define HCODEC_WRRSP_IMEM                          ((0x1343  << 2) + 0xff620000)
#define HCODEC_LMEM_DMA_CTRL                       ((0x1350  << 2) + 0xff620000)
#define HCODEC_LMEM_DMA_ADR                        ((0x1351  << 2) + 0xff620000)
#define HCODEC_LMEM_DMA_COUNT                      ((0x1352  << 2) + 0xff620000)
// bit[29:24] A_brst_num_lmem
// bit[21:16] A_id_lmem
// bit[11:0] wrrsp_count_lmem
#define HCODEC_WRRSP_LMEM                          ((0x1353  << 2) + 0xff620000)
#define HCODEC_MAC_CTRL1                           ((0x1360  << 2) + 0xff620000)
#define HCODEC_ACC0REG1                            ((0x1361  << 2) + 0xff620000)
#define HCODEC_ACC1REG1                            ((0x1362  << 2) + 0xff620000)
#define HCODEC_MAC_CTRL2                           ((0x1370  << 2) + 0xff620000)
#define HCODEC_ACC0REG2                            ((0x1371  << 2) + 0xff620000)
#define HCODEC_ACC1REG2                            ((0x1372  << 2) + 0xff620000)
#define HCODEC_CPU_TRACE                           ((0x1380  << 2) + 0xff620000)
//
// Closing file:  vcpu_regs.h
//
//
// Reading file:  vcpu_regs.h
//
//========================================================================
//  VCPU module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_VDEC_VCPU_CBUS_BASE = 0x03
// -----------------------------------------------
#define VDEC2_MSP                                  ((0x2300  << 2) + 0xff620000)
#define VDEC2_MPSR                                 ((0x2301  << 2) + 0xff620000)
#define VDEC2_MINT_VEC_BASE                        ((0x2302  << 2) + 0xff620000)
#define VDEC2_MCPU_INTR_GRP                        ((0x2303  << 2) + 0xff620000)
#define VDEC2_MCPU_INTR_MSK                        ((0x2304  << 2) + 0xff620000)
#define VDEC2_MCPU_INTR_REQ                        ((0x2305  << 2) + 0xff620000)
#define VDEC2_MPC_P                                ((0x2306  << 2) + 0xff620000)
#define VDEC2_MPC_D                                ((0x2307  << 2) + 0xff620000)
#define VDEC2_MPC_E                                ((0x2308  << 2) + 0xff620000)
#define VDEC2_MPC_W                                ((0x2309  << 2) + 0xff620000)
#define VDEC2_MINDEX0_REG                          ((0x230a  << 2) + 0xff620000)
#define VDEC2_MINDEX1_REG                          ((0x230b  << 2) + 0xff620000)
#define VDEC2_MINDEX2_REG                          ((0x230c  << 2) + 0xff620000)
#define VDEC2_MINDEX3_REG                          ((0x230d  << 2) + 0xff620000)
#define VDEC2_MINDEX4_REG                          ((0x230e  << 2) + 0xff620000)
#define VDEC2_MINDEX5_REG                          ((0x230f  << 2) + 0xff620000)
#define VDEC2_MINDEX6_REG                          ((0x2310  << 2) + 0xff620000)
#define VDEC2_MINDEX7_REG                          ((0x2311  << 2) + 0xff620000)
#define VDEC2_MMIN_REG                             ((0x2312  << 2) + 0xff620000)
#define VDEC2_MMAX_REG                             ((0x2313  << 2) + 0xff620000)
#define VDEC2_MBREAK0_REG                          ((0x2314  << 2) + 0xff620000)
#define VDEC2_MBREAK1_REG                          ((0x2315  << 2) + 0xff620000)
#define VDEC2_MBREAK2_REG                          ((0x2316  << 2) + 0xff620000)
#define VDEC2_MBREAK3_REG                          ((0x2317  << 2) + 0xff620000)
#define VDEC2_MBREAK_TYPE                          ((0x2318  << 2) + 0xff620000)
#define VDEC2_MBREAK_CTRL                          ((0x2319  << 2) + 0xff620000)
#define VDEC2_MBREAK_STAUTS                        ((0x231a  << 2) + 0xff620000)
#define VDEC2_MDB_ADDR_REG                         ((0x231b  << 2) + 0xff620000)
#define VDEC2_MDB_DATA_REG                         ((0x231c  << 2) + 0xff620000)
#define VDEC2_MDB_CTRL                             ((0x231d  << 2) + 0xff620000)
#define VDEC2_MSFTINT0                             ((0x231e  << 2) + 0xff620000)
#define VDEC2_MSFTINT1                             ((0x231f  << 2) + 0xff620000)
#define VDEC2_CSP                                  ((0x2320  << 2) + 0xff620000)
#define VDEC2_CPSR                                 ((0x2321  << 2) + 0xff620000)
#define VDEC2_CINT_VEC_BASE                        ((0x2322  << 2) + 0xff620000)
#define VDEC2_CCPU_INTR_GRP                        ((0x2323  << 2) + 0xff620000)
#define VDEC2_CCPU_INTR_MSK                        ((0x2324  << 2) + 0xff620000)
#define VDEC2_CCPU_INTR_REQ                        ((0x2325  << 2) + 0xff620000)
#define VDEC2_CPC_P                                ((0x2326  << 2) + 0xff620000)
#define VDEC2_CPC_D                                ((0x2327  << 2) + 0xff620000)
#define VDEC2_CPC_E                                ((0x2328  << 2) + 0xff620000)
#define VDEC2_CPC_W                                ((0x2329  << 2) + 0xff620000)
#define VDEC2_CINDEX0_REG                          ((0x232a  << 2) + 0xff620000)
#define VDEC2_CINDEX1_REG                          ((0x232b  << 2) + 0xff620000)
#define VDEC2_CINDEX2_REG                          ((0x232c  << 2) + 0xff620000)
#define VDEC2_CINDEX3_REG                          ((0x232d  << 2) + 0xff620000)
#define VDEC2_CINDEX4_REG                          ((0x232e  << 2) + 0xff620000)
#define VDEC2_CINDEX5_REG                          ((0x232f  << 2) + 0xff620000)
#define VDEC2_CINDEX6_REG                          ((0x2330  << 2) + 0xff620000)
#define VDEC2_CINDEX7_REG                          ((0x2331  << 2) + 0xff620000)
#define VDEC2_CMIN_REG                             ((0x2332  << 2) + 0xff620000)
#define VDEC2_CMAX_REG                             ((0x2333  << 2) + 0xff620000)
#define VDEC2_CBREAK0_REG                          ((0x2334  << 2) + 0xff620000)
#define VDEC2_CBREAK1_REG                          ((0x2335  << 2) + 0xff620000)
#define VDEC2_CBREAK2_REG                          ((0x2336  << 2) + 0xff620000)
#define VDEC2_CBREAK3_REG                          ((0x2337  << 2) + 0xff620000)
#define VDEC2_CBREAK_TYPE                          ((0x2338  << 2) + 0xff620000)
#define VDEC2_CBREAK_CTRL                          ((0x2339  << 2) + 0xff620000)
#define VDEC2_CBREAK_STAUTS                        ((0x233a  << 2) + 0xff620000)
#define VDEC2_CDB_ADDR_REG                         ((0x233b  << 2) + 0xff620000)
#define VDEC2_CDB_DATA_REG                         ((0x233c  << 2) + 0xff620000)
#define VDEC2_CDB_CTRL                             ((0x233d  << 2) + 0xff620000)
#define VDEC2_CSFTINT0                             ((0x233e  << 2) + 0xff620000)
#define VDEC2_CSFTINT1                             ((0x233f  << 2) + 0xff620000)
#define VDEC2_IMEM_DMA_CTRL                        ((0x2340  << 2) + 0xff620000)
#define VDEC2_IMEM_DMA_ADR                         ((0x2341  << 2) + 0xff620000)
#define VDEC2_IMEM_DMA_COUNT                       ((0x2342  << 2) + 0xff620000)
// bit[29:24] A_brst_num_imem
// bit[21:16] A_id_imem
// bit[11:0] wrrsp_count_imem (reserved)
#define VDEC2_WRRSP_IMEM                           ((0x2343  << 2) + 0xff620000)
#define VDEC2_LMEM_DMA_CTRL                        ((0x2350  << 2) + 0xff620000)
#define VDEC2_LMEM_DMA_ADR                         ((0x2351  << 2) + 0xff620000)
#define VDEC2_LMEM_DMA_COUNT                       ((0x2352  << 2) + 0xff620000)
// bit[29:24] A_brst_num_lmem
// bit[21:16] A_id_lmem
// bit[11:0] wrrsp_count_lmem
#define VDEC2_WRRSP_LMEM                           ((0x2353  << 2) + 0xff620000)
#define VDEC2_MAC_CTRL1                            ((0x2360  << 2) + 0xff620000)
#define VDEC2_ACC0REG1                             ((0x2361  << 2) + 0xff620000)
#define VDEC2_ACC1REG1                             ((0x2362  << 2) + 0xff620000)
#define VDEC2_MAC_CTRL2                            ((0x2370  << 2) + 0xff620000)
#define VDEC2_ACC0REG2                             ((0x2371  << 2) + 0xff620000)
#define VDEC2_ACC1REG2                             ((0x2372  << 2) + 0xff620000)
#define VDEC2_CPU_TRACE                            ((0x2380  << 2) + 0xff620000)
//
// Closing file:  vcpu_regs.h
//
//
// Reading file:  vcpu_regs.h
//
//========================================================================
//  VCPU module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_VDEC_VCPU_CBUS_BASE = 0x03
// -----------------------------------------------
#define HEVC_MSP                                   ((0x3300  << 2) + 0xff620000)
#define HEVC_MPSR                                  ((0x3301  << 2) + 0xff620000)
#define HEVC_MINT_VEC_BASE                         ((0x3302  << 2) + 0xff620000)
#define HEVC_MCPU_INTR_GRP                         ((0x3303  << 2) + 0xff620000)
#define HEVC_MCPU_INTR_MSK                         ((0x3304  << 2) + 0xff620000)
#define HEVC_MCPU_INTR_REQ                         ((0x3305  << 2) + 0xff620000)
#define HEVC_MPC_P                                 ((0x3306  << 2) + 0xff620000)
#define HEVC_MPC_D                                 ((0x3307  << 2) + 0xff620000)
#define HEVC_MPC_E                                 ((0x3308  << 2) + 0xff620000)
#define HEVC_MPC_W                                 ((0x3309  << 2) + 0xff620000)
#define HEVC_MINDEX0_REG                           ((0x330a  << 2) + 0xff620000)
#define HEVC_MINDEX1_REG                           ((0x330b  << 2) + 0xff620000)
#define HEVC_MINDEX2_REG                           ((0x330c  << 2) + 0xff620000)
#define HEVC_MINDEX3_REG                           ((0x330d  << 2) + 0xff620000)
#define HEVC_MINDEX4_REG                           ((0x330e  << 2) + 0xff620000)
#define HEVC_MINDEX5_REG                           ((0x330f  << 2) + 0xff620000)
#define HEVC_MINDEX6_REG                           ((0x3310  << 2) + 0xff620000)
#define HEVC_MINDEX7_REG                           ((0x3311  << 2) + 0xff620000)
#define HEVC_MMIN_REG                              ((0x3312  << 2) + 0xff620000)
#define HEVC_MMAX_REG                              ((0x3313  << 2) + 0xff620000)
#define HEVC_MBREAK0_REG                           ((0x3314  << 2) + 0xff620000)
#define HEVC_MBREAK1_REG                           ((0x3315  << 2) + 0xff620000)
#define HEVC_MBREAK2_REG                           ((0x3316  << 2) + 0xff620000)
#define HEVC_MBREAK3_REG                           ((0x3317  << 2) + 0xff620000)
#define HEVC_MBREAK_TYPE                           ((0x3318  << 2) + 0xff620000)
#define HEVC_MBREAK_CTRL                           ((0x3319  << 2) + 0xff620000)
#define HEVC_MBREAK_STAUTS                         ((0x331a  << 2) + 0xff620000)
#define HEVC_MDB_ADDR_REG                          ((0x331b  << 2) + 0xff620000)
#define HEVC_MDB_DATA_REG                          ((0x331c  << 2) + 0xff620000)
#define HEVC_MDB_CTRL                              ((0x331d  << 2) + 0xff620000)
#define HEVC_MSFTINT0                              ((0x331e  << 2) + 0xff620000)
#define HEVC_MSFTINT1                              ((0x331f  << 2) + 0xff620000)
#define HEVC_CSP                                   ((0x3320  << 2) + 0xff620000)
#define HEVC_CPSR                                  ((0x3321  << 2) + 0xff620000)
#define HEVC_CINT_VEC_BASE                         ((0x3322  << 2) + 0xff620000)
#define HEVC_CCPU_INTR_GRP                         ((0x3323  << 2) + 0xff620000)
#define HEVC_CCPU_INTR_MSK                         ((0x3324  << 2) + 0xff620000)
#define HEVC_CCPU_INTR_REQ                         ((0x3325  << 2) + 0xff620000)
#define HEVC_CPC_P                                 ((0x3326  << 2) + 0xff620000)
#define HEVC_CPC_D                                 ((0x3327  << 2) + 0xff620000)
#define HEVC_CPC_E                                 ((0x3328  << 2) + 0xff620000)
#define HEVC_CPC_W                                 ((0x3329  << 2) + 0xff620000)
#define HEVC_CINDEX0_REG                           ((0x332a  << 2) + 0xff620000)
#define HEVC_CINDEX1_REG                           ((0x332b  << 2) + 0xff620000)
#define HEVC_CINDEX2_REG                           ((0x332c  << 2) + 0xff620000)
#define HEVC_CINDEX3_REG                           ((0x332d  << 2) + 0xff620000)
#define HEVC_CINDEX4_REG                           ((0x332e  << 2) + 0xff620000)
#define HEVC_CINDEX5_REG                           ((0x332f  << 2) + 0xff620000)
#define HEVC_CINDEX6_REG                           ((0x3330  << 2) + 0xff620000)
#define HEVC_CINDEX7_REG                           ((0x3331  << 2) + 0xff620000)
#define HEVC_CMIN_REG                              ((0x3332  << 2) + 0xff620000)
#define HEVC_CMAX_REG                              ((0x3333  << 2) + 0xff620000)
#define HEVC_CBREAK0_REG                           ((0x3334  << 2) + 0xff620000)
#define HEVC_CBREAK1_REG                           ((0x3335  << 2) + 0xff620000)
#define HEVC_CBREAK2_REG                           ((0x3336  << 2) + 0xff620000)
#define HEVC_CBREAK3_REG                           ((0x3337  << 2) + 0xff620000)
#define HEVC_CBREAK_TYPE                           ((0x3338  << 2) + 0xff620000)
#define HEVC_CBREAK_CTRL                           ((0x3339  << 2) + 0xff620000)
#define HEVC_CBREAK_STAUTS                         ((0x333a  << 2) + 0xff620000)
#define HEVC_CDB_ADDR_REG                          ((0x333b  << 2) + 0xff620000)
#define HEVC_CDB_DATA_REG                          ((0x333c  << 2) + 0xff620000)
#define HEVC_CDB_CTRL                              ((0x333d  << 2) + 0xff620000)
#define HEVC_CSFTINT0                              ((0x333e  << 2) + 0xff620000)
#define HEVC_CSFTINT1                              ((0x333f  << 2) + 0xff620000)
#define HEVC_IMEM_DMA_CTRL                         ((0x3340  << 2) + 0xff620000)
#define HEVC_IMEM_DMA_ADR                          ((0x3341  << 2) + 0xff620000)
#define HEVC_IMEM_DMA_COUNT                        ((0x3342  << 2) + 0xff620000)
// bit[29:24] A_brst_num_imem
// bit[21:16] A_id_imem
// bit[11:0] wrrsp_count_imem (reserved)
#define HEVC_WRRSP_IMEM                            ((0x3343  << 2) + 0xff620000)
#define HEVC_LMEM_DMA_CTRL                         ((0x3350  << 2) + 0xff620000)
#define HEVC_LMEM_DMA_ADR                          ((0x3351  << 2) + 0xff620000)
#define HEVC_LMEM_DMA_COUNT                        ((0x3352  << 2) + 0xff620000)
// bit[29:24] A_brst_num_lmem
// bit[21:16] A_id_lmem
// bit[11:0] wrrsp_count_lmem
#define HEVC_WRRSP_LMEM                            ((0x3353  << 2) + 0xff620000)
#define HEVC_MAC_CTRL1                             ((0x3360  << 2) + 0xff620000)
#define HEVC_ACC0REG1                              ((0x3361  << 2) + 0xff620000)
#define HEVC_ACC1REG1                              ((0x3362  << 2) + 0xff620000)
#define HEVC_MAC_CTRL2                             ((0x3370  << 2) + 0xff620000)
#define HEVC_ACC0REG2                              ((0x3371  << 2) + 0xff620000)
#define HEVC_ACC1REG2                              ((0x3372  << 2) + 0xff620000)
#define HEVC_CPU_TRACE                             ((0x3380  << 2) + 0xff620000)
//
// Closing file:  vcpu_regs.h
//
//
// Reading file:  henc_regs.h
//
//========================================================================
//  MDEC module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_HCODEC_HENC_CBUS_BASE = 0x0a
// -----------------------------------------------
#define HCODEC_HENC_SCRATCH_0                      ((0x1ac0  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_1                      ((0x1ac1  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_2                      ((0x1ac2  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_3                      ((0x1ac3  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_4                      ((0x1ac4  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_5                      ((0x1ac5  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_6                      ((0x1ac6  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_7                      ((0x1ac7  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_8                      ((0x1ac8  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_9                      ((0x1ac9  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_A                      ((0x1aca  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_B                      ((0x1acb  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_C                      ((0x1acc  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_D                      ((0x1acd  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_E                      ((0x1ace  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_F                      ((0x1acf  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_G                      ((0x1ad0  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_H                      ((0x1ad1  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_I                      ((0x1ad2  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_J                      ((0x1ad3  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_K                      ((0x1ad4  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_L                      ((0x1ad5  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_M                      ((0x1ad6  << 2) + 0xff620000)
#define HCODEC_HENC_SCRATCH_N                      ((0x1ad7  << 2) + 0xff620000)
// bit [7:0] data_feed_buff_id
#define HCODEC_IE_DATA_FEED_BUFF_INFO              ((0x1ad8  << 2) + 0xff620000)
//
// Closing file:  henc_regs.h
//
//
// Reading file:  vlc_regs.h
//
//========================================================================
//  VLC module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_HCODEC_VLC_CBUS_BASE = 0x0d
// -----------------------------------------------
// Bit[31:28] - henc_status
// Bit[27:8] - reserved
// Bit[7]    mc_hcmd_buff_enable
// Bit[6]    mc_hcmd_use_mc_hcmd_buff
// Bit[5]    mc_hcmd_use_mc_hcmd_hw_start
// Bit[4]    no_mc_out_null_non_skipped_mb
// Bit[3]    mc_out_even_skipped_mb
// Bit[2] - hcmd_enable
// Bit[1] - vlc_control_enable (0 will treat as soft_reset)
// Bit[0] - vlc_input_enable (enable input interface)
#define HCODEC_VLC_STATUS_CTRL                     ((0x1d00  << 2) + 0xff620000)
// Bit [31]  - small_luma_ignore_chroma
// Bit[30:16] - Reserved
// Bit [15]  - enable_free_clk_mc_hcmd_buff
// Bit [14]  - enable_free_clk_reg
// Bit [13]  - enable_free_clk_stream
// Bit [12]  - enable_free_clk_pre_buff
// Bit [11]  - enable_free_clk_vb_buff
// Bit [10]  - enable_free_clk_dc_input
// Bit [9]   - enable_free_clk_input
// Bit [8]   - enable_free_clk_mv_cal
// Bit [7]   - enable_free_clk_status
// Bit [6]   - enable_free_clk_mc_dblk_cmd_if
// Bit [5]   - disable_mvd_enc_finished
// Bit [4]   - I16MB_share_ipred_mode_with_I4MB
// Bit [3]   - fixed_picture_qp
// Bit [2]   - use_set_b8_mode ( not used now)
// Bit [1]   - use_set_mb_skip_run
// Bit [0]   - pop_coeff_even_all_zero
#define HCODEC_VLC_CONFIG                          ((0x1d01  << 2) + 0xff620000)
// --------------------------------------------
// Bitstream DDR Interface
// --------------------------------------------
#define HCODEC_VLC_VB_START_PTR                    ((0x1d10  << 2) + 0xff620000)
#define HCODEC_VLC_VB_END_PTR                      ((0x1d11  << 2) + 0xff620000)
#define HCODEC_VLC_VB_WR_PTR                       ((0x1d12  << 2) + 0xff620000)
// Read Only, VLC_VB_SW_RD_PTR or VLC_VB_HW_RD_PTR
#define HCODEC_VLC_VB_RD_PTR                       ((0x1d13  << 2) + 0xff620000)
#define HCODEC_VLC_VB_SW_RD_PTR                    ((0x1d14  << 2) + 0xff620000)
// Read Only
#define HCODEC_VLC_VB_LEFT                         ((0x1d15  << 2) + 0xff620000)
// VB FIFO Control
// bit  [31:24] vb_full_int_enable_cpu[7:0]
// bit  [23:16] vb_full_int_enable_amrisc[7:0]
//   -bit 23 Video BUFFER LEFT < 0x400 Bytes
//   -bit 22 Video BUFFER LEFT < 0x200 Bytes
//   -bit 21 Video BUFFER LEFT < 0x100 Bytes
//   -bit 20 Video BUFFER LEFT < 0x80 Bytes
//   -bit 19 Video BUFFER LEFT < 0x40 Bytes
//   -bit 18 Video BUFFER LEFT < 0x20 Bytes
//   -bit 17 vbfifo left  < 16 double words (8x64bits)
//   -bit 16 vbfifo left  < 8 double words (4x64bits)
// bit  [15]    wr_ptr_int_enable_cpu
// bit  [14]    wr_ptr_int_enable_amrisc
// bit  [13]    wr_ptr_int (Read Only, write 1 will clear)
// bit  [12]    vb_full_int_enable_cpu(Read Only)
// bit  [11]    vb_full_int_enable_amrisc(Read Only)
// bit  [10]    reserved
// bit  [9]     use_vb_hw_rd_ptr
// bit  [8]     vb_always_ready Set to 1 to ignore vb_level blocking DDR write
// bit  [7]     vb_ready_for_transfer (Read Only)
// bit  [6]     data_ready_for_transfer (Read Only)
// bits [5:3]   vb_endian       Set VB Endian inside DDR memory
// bit  [2]     vb_write_busy   Read Only - indicate DDR write busy
// bit  [1]     vb_write_en     Set to 1 to enable writing data to DDR memory
// bit  [0]     vb_soft_reset   Soft reset
#define HCODEC_VLC_VB_CONTROL                      ((0x1d16  << 2) + 0xff620000)
// bit 31    transfer_length 0 - 32x64 Bits per request, 1 - 16x64 Bits per request  // default : 0
// bit 30    A_urgent  // default : 0
// bit 29:24 A_brst_num // default : 0x3f
// bit 23:22 reserved
// bit 21:16 A_id  // default : 0x20
// bit 15:0  vb_left_hold // default : 0
#define HCODEC_VLC_VB_MEM_CTL                      ((0x1d17  << 2) + 0xff620000)
// vb_wr_ptr address to generate interrupt
#define HCODEC_VLC_VB_INT_PTR                      ((0x1d18  << 2) + 0xff620000)
// bit[31:12] reserved
// bit[11:0] vlc_wrrsp_count
#define HCODEC_VLC_WRRSP                           ((0x1d19  << 2) + 0xff620000)
#define HCODEC_VLC_TOTAL_BYTES                     ((0x1d1a  << 2) + 0xff620000)
// bit  [31:26] reserved
// bit  [25]    vb_flush
// bit  [24]    vb_reg_ready
// bit  [23:16] vb_buff_left     -- Read only
// bit  [15:8]  vb_buff_wr_point -- RW
// bit  [7:0]   vb_buff_rd_point -- RW
#define HCODEC_VLC_VB_BUFF                         ((0x1d1b  << 2) + 0xff620000)
// bit[31]    flush_vlc_pre_buff
// bit[30:27] reserved
// bit[26:24] vb_pre_buff_level
// bit[23:0]  vb_pre_buff_data[55:32]
#define HCODEC_VLC_VB_PRE_BUFF_HI                  ((0x1d1c  << 2) + 0xff620000)
// bit[31:0] vb_pre_buff_data[31:0]
#define HCODEC_VLC_VB_PRE_BUFF_LOW                 ((0x1d1d  << 2) + 0xff620000)
// bit[31]    stream_encap_enable  // 0x0000(00-03) will be changed to 0x000003(00-03) if enabled
// bit[30:29] stream_encap_delay   // delay bytes for encap used
// bit[28:24] stream_buff_point
// bit[23:0]  stream_buff_data
#define HCODEC_VLC_STREAM_BUFF                     ((0x1d1e  << 2) + 0xff620000)
// bit[31]    push_stream_block - Read Only (Will set if vb_buff full)
// bit[30]    push_stream_busy  - Read Only (busy when output one byte from stream_buf (max 2 clocks for 8 bits push)
// bit[29:28] stream_encap_status - Read Only
// bit[27:21] reserved
// Long Mode : (Amrisc need movilo and mvihi high to set stream_info)
//   bit[20:16] push_stream_long_length (0 or 31 : Mid or Short mode)
//   bit[15:0]  push_stream_data
// Mid Mode : (Amrisc need movi to set stream_info)
//   bit[15:12]] push_stream_mid_length (1-12 : mid mode active, 0-short mode, 15 - byte align)
//   bit[11:0]  push_stream_data
// Short Mode : (Amrisc can use mtspi to push stream directely)
//   bit[7:5] push_stream_short_length (0-5 : short length, else - invalid)
//   bit[4:0]  push_stream_data
#define HCODEC_VLC_PUSH_STREAM                     ((0x1d1f  << 2) + 0xff620000)
// bit[15:8] ELEMENT_LENGTH
// bit[7:1]  reserved
// bit[0]  Write - push start, Read - Push Busy
#define HCODEC_VLC_PUSH_ELEMENT                    ((0x1d20  << 2) + 0xff620000)
#define HCODEC_VLC_ELEMENT_DATA                    ((0x1d21  << 2) + 0xff620000)
// bit[7] hcmd_intra_use_sw_info
// bit[6] hcmd_use_sw_info
// bit[5] always_use_info_0_cbp_blk
// bit[4] always_update_info_0_cbp_blk
// bit[3] reset_left_mb_wr
// bit[2] reset_top_mb_wr
// bit[1] set_left_mb_wr
// bit[0] set_top_mb_wr
#define HCODEC_VLC_SPECIAL_CTL                     ((0x1d22  << 2) + 0xff620000)
// bit[28]    left_intra
// bit[27:22] left_quant
// bit[21:16] left_quant_c
// bit[12]    top_intra
// bit[11:6]  top_quant
// bit[5:0]   top_quant_c
#define HCODEC_VLC_HCMD_T_L_INFO                   ((0x1d23  << 2) + 0xff620000)
// bit[12]    cur_intra
// bit[11:6]  cur_quant
// bit[5:0]   cur_quant_c
#define HCODEC_VLC_HCMD_CUR_INFO                   ((0x1d24  << 2) + 0xff620000)
// bit[13]    top_left_info_in_data_mv_cal
// bit[12]    only_use_info_0_top_left_in_I
// bit[11]    top_left_info_in_data
// bit[10]    early_mix_mc_hcmd
// bit[9]     update_top_left_mix
// bit[8]     p_top_left_mix
// bit[7]     mv_cal_mixed_type
// bit[6]     mc_hcmd_mixed_type
// bit[5]     use_seperate_int_control
// bit[4]     hcmd_intra_use_q_info
// bit[3]     hcmd_left_use_prev_info
// bit[2]     hcmd_use_q_info
// bit[1]     use_q_delta_quant
// bit[0]     detect_I16_from_I4
#define HCODEC_VLC_ADV_CONFIG                      ((0x1d25  << 2) + 0xff620000)
//   31 - use_hcmd_mb_xy_auto
//23:16 - hcmd_max_mb_x
//15:8  - hcmd_mb_y_auto
// 7:0  - hcmd_mb_x_auto
#define HCODEC_VLC_HCMD_MBXY_AUTO                  ((0x1d26  << 2) + 0xff620000)
// bit[31:0] vlc_int_control_inter -- will be used when use_seperate_int_control is set
#define HCODEC_VLC_INT_CONTROL_INTER               ((0x1d2f  << 2) + 0xff620000)
// --------------------------------------------
// Picture VLC
// --------------------------------------------
// (&(int|(~AND_enable))|(|(int&OR_enable)))
// bit[31]    OR interrupt Enable Reserved
// bit[30]    OR interrupt Enable for mv_busy
// bit[29]    OR interrupt Enable for b8_mode_busy
// bit[28]    OR interrupt Enable for mb_skip_run_busy
// bit[27]    OR interrupt Enable for cbp_busy
// bit[26]    OR interrupt Enable for Reserved
// bit[25]    OR interrupt Enable for Reserved
// bit[24]    OR interrupt Enable for mb_info_busy
// bit[23]    AND interrupt Enable Reserved
// bit[22]    AND interrupt Enable for mv_busy
// bit[21]    AND interrupt Enable for b8_mode_busy
// bit[20]    AND interrupt Enable for mb_skip_run_busy
// bit[19]    AND interrupt Enable for cbp_busy
// bit[18]    AND interrupt Enable for Reserved
// bit[17]    AND interrupt Enable for Reserved
// bit[16]    AND interrupt Enable for mb_info_busy
// bit[15]    OR interrupt Enable Reserved
// bit[14]    OR interrupt Enable for mvd
// bit[13]    OR interrupt Enable for b8_mode
// bit[12]    OR interrupt Enable for mb_skip_run
// bit[11]    OR interrupt Enable for cbp_ready
// bit[10]    OR interrupt Enable for c_ipred_mode_ready
// bit[9]     OR interrupt Enable for ipred_mode_ready
// bit[8]     OR interrupt Enable for mb_info_ready
// bit[7]     AND interrupt Enable Reserved
// bit[6]     AND interrupt Enable for mvd
// bit[5]     AND interrupt Enable for b8_mode
// bit[4]     AND interrupt Enable for mb_skip_run
// bit[3]     AND interrupt Enable for cbp_ready
// bit[2]     AND interrupt Enable for c_ipred_mode_ready
// bit[1]     AND interrupt Enable for ipred_mode_ready
// bit[0]     AND interrupt Enable for mb_info_ready
#define HCODEC_VLC_INT_CONTROL                     ((0x1d30  << 2) + 0xff620000)
// Bit[31:16] picture_height
// Bit[15:0]  picture_width
#define HCODEC_VLC_PIC_SIZE                        ((0x1d31  << 2) + 0xff620000)
// [31:16] Reserved
// [15:3] pic_width_in_mbs_minus1
// [2:0]  picture_type
#define HCODEC_VLC_PIC_INFO                        ((0x1d32  << 2) + 0xff620000)
// Bit[31:16] MB_NR
// Bit[15:8] MBY
// Bit[7:0] MBX
#define HCODEC_VLC_PIC_POSITION                    ((0x1d33  << 2) + 0xff620000)
// Bit[31] MV_busy
// Bit[30:6] Reserved
// Bit[15] Reserved
// Bit[14] vlc_input_MV_busy
// Bit[13] vlc_input_b8_mode_busy
// Bit[12] vlc_input_mb_skip_run_busy
// Bit[11] vlc_input_cbp_busy
// Bit[10] Reserved
// Bit[9]  Reserved
// Bit[8] vlc_input_mb_info_busy
// Bit[7] Reserved
// Bit[6] mvd
// Bit[5] b8_mode
// Bit[4] mb_skip_run
// Bit[3] cbp
// Bit[2] c_ipred_mode
// Bit[1] ipred_mode
// Bit[0] mb_info ( mb_type, mb_x, mb_y)
#define HCODEC_VLC_INPUT_STATUS                    ((0x1d34  << 2) + 0xff620000)
// Bit[31:28] detected_mb_type
// Bit[27:16] mb_y
// Bit[15:4]  mb_x
// Bit[3:0]   mb_type
#define HCODEC_VLC_MB_INFO                         ((0x1d35  << 2) + 0xff620000)
// commnad 0 -- no pending
// normal command + 1 is pending command
//
// bit 31:28 -- pending command 7
// bit 27:24 -- pending command 6
// bit 23:20 -- pending command 5
// bit 19:16 -- pending command 4
// bit 15:12 -- pending command 3
// bit 11:8  -- pending command 2
// bit  7:4  -- pending command 1
// bit  3:0  -- pending command 0
#define HCODEC_VLC_ENC_PEND_CMD                    ((0x1d36  << 2) + 0xff620000)
// For I Slice
// Bit[31:16] Reserved
// Bit[15:0] IntraType
#define HCODEC_HENC_TOP_INFO_0                     ((0x1d37  << 2) + 0xff620000)
#define HCODEC_HENC_LEFT_INFO_0                    ((0x1d38  << 2) + 0xff620000)
// For I Slice
// Bit[31:24] V_nnz
// Bit[23:16] U_nnz
// Bit[15:0]  Y_nnz
#define HCODEC_HENC_TOP_INFO_1                     ((0x1d39  << 2) + 0xff620000)
#define HCODEC_HENC_LEFT_INFO_1                    ((0x1d3a  << 2) + 0xff620000)
// bit[63:0] ipred_mode
#define HCODEC_VLC_IPRED_MODE_HI                   ((0x1d3b  << 2) + 0xff620000)
#define HCODEC_VLC_IPRED_MODE_LO                   ((0x1d3c  << 2) + 0xff620000)
// bit[15:8] SE delta quant
// bit[7:0]  UE delta quant
#define HCODEC_VLC_DELTA_QP                        ((0x1d3d  << 2) + 0xff620000)
// bit[31:16] Reserved
// bit[15:12] Reserved
// bit[11:8] c_ipred_mode
// bit[7:0] cbp
#define HCODEC_VLC_MB_HEADER_INFO                  ((0x1d3e  << 2) + 0xff620000)
// bit[31:16] mb_skip_run
// bit[15:0]  b8_mode
#define HCODEC_VLC_P_MB_HEADER_INFO                ((0x1d3f  << 2) + 0xff620000)
// bit[31]    write_ptr_update
// bit[30]    read_ptr_update
// bit[29:20] coeff_buf_level
// bit[19:10] coeff_buf_write_ptr
// bit[9:0]   coeff_buf_read_ptr
#define HCODEC_VLC_COEFF_BUF_STATUS                ((0x1d40  << 2) + 0xff620000)
// bit[31:10] Reserved
// bit[9:0] read_req_addr
#define HCODEC_VLC_COEFF_RD_REQ                    ((0x1d41  << 2) + 0xff620000)
// bit[20]   - coeff_buf_read_finished
// bit[19]   - coeff_first
// bit[18:4] - coeff_level
// bit[3:0]  - coeff_run
#define HCODEC_VLC_COEFF                           ((0x1d42  << 2) + 0xff620000)
// bit[31]    - coeff_info_ready
// bit[30:25] - Reserved
// bit[24:15] - block_begin_addr
// bit[14:11] - trailing_one_sign
// bit[10:6]  - total_coeff
// bit[5:4]   - trailing_ones
// bit[3:0]   - total_zeros
#define HCODEC_VLC_COEFF_INFO                      ((0x1d43  << 2) + 0xff620000)
// bit[31]    write_ptr_update
// bit[30]    read_ptr_update
// bit[29:25] Reserved
// bit[24:20] dc_buf_level -- 0-16
// bit[19:15] Reserved
// bit[14:10] dc_buf_write_ptr
// bit[9:5]   Reserved
// bit[4:0]   dc_buf_read_ptr
#define HCODEC_VLC_DC_BUF_STATUS                   ((0x1d44  << 2) + 0xff620000)
// bit[31:10] Reserved
// bit[9:4]   Reserved
// bit[3:0]   read_req_addr
#define HCODEC_VLC_DC_RD_REQ                       ((0x1d45  << 2) + 0xff620000)
// bit[31:17] - Reserved
// bit[16]   - dc_first
// bit[15:1] - dc_level
// bit[0]    - dc_type  0 - CDC, 1 - LDC
#define HCODEC_VLC_DC                              ((0x1d46  << 2) + 0xff620000)
// bit[31]    - dc_info_ready
// bit[30:25] - Reserved
// bit[24:20] - Reserved
// bit[19:15] - dc_idx_begin_addr
// bit[14:11] - dc_trailing_one_sign
// bit[10:6]  - dc_total_coeff
// bit[5:4]   - dc_trailing_ones
// bit[3:0]   - dc_total_zeros
#define HCODEC_VLC_DC_INFO                         ((0x1d47  << 2) + 0xff620000)
// bit[31:4]  - Reserved
// bit[3:0]   - mv_rw_idx  (auto increment when read/write VLC_MV)
#define HCODEC_VLC_MV_INDEX                        ((0x1d48  << 2) + 0xff620000)
// bit[31:16] - MVY
// bit[15:0]  - MVX
#define HCODEC_VLC_MV                              ((0x1d49  << 2) + 0xff620000)
// bit[31:16] - MVY
// bitp15:0]  - MVX
// Write to HENC_TOP_MV_0 will cause previous U->UL, UR->U, and UR write
// Read will read U MV only
#define HCODEC_HENC_TOP_MV_0                       ((0x1d4a  << 2) + 0xff620000)
#define HCODEC_HENC_TOP_MV_1                       ((0x1d4b  << 2) + 0xff620000)
#define HCODEC_HENC_TOP_MV_2                       ((0x1d4c  << 2) + 0xff620000)
#define HCODEC_HENC_TOP_MV_3                       ((0x1d4d  << 2) + 0xff620000)
#define HCODEC_HENC_LEFT_MV_0                      ((0x1d4e  << 2) + 0xff620000)
#define HCODEC_HENC_LEFT_MV_1                      ((0x1d4f  << 2) + 0xff620000)
#define HCODEC_HENC_LEFT_MV_2                      ((0x1d50  << 2) + 0xff620000)
#define HCODEC_HENC_LEFT_MV_3                      ((0x1d51  << 2) + 0xff620000)
// Bit[31:1] Reserved
// Bit[0] top_left_mv_ready
#define HCODEC_TOP_LEFT_READY                      ((0x1d52  << 2) + 0xff620000)
// Bit[31:16] Reserved
// Bit[15:0] mb_skip_run
#define HCODEC_MB_SKIP_RUN                         ((0x1d53  << 2) + 0xff620000)
// Bit[31:16] Reserved
// Bit[15]    Reserved
// Bit[14:13] rd_struct // 00 - frame, 10 - top field, 11 - bottom field
// Bit[12:11] wr_struct // 00 - frame, 10 - top field, 11 - bottom field
// Bit[10:5]  mv_buff_id
// Bit[4:0]   mv_ref
#define HCODEC_VLC_HCMD_CONFIG                     ((0x1d54  << 2) + 0xff620000)
// Bit[9:0] h264_dblk_info
#define HCODEC_VLC_HCMD_DBLK_INFO                  ((0x1d55  << 2) + 0xff620000)
// Bit[3:0] vlc_dbg_idx
#define HCODEC_VLC_DBG_IDX                         ((0x1d56  << 2) + 0xff620000)
// Read Only
#define HCODEC_VLC_DBG_READ                        ((0x1d57  << 2) + 0xff620000)
// [   29] RW jpeg_comp2_ac_table_sel.                                                      Default 0.
// [   28] RW jpeg_comp2_dc_table_sel.                                                      Default 0.
// [26:25] RW jpeg_comp2_cnt_max.                                                           Default 0.
// [   24] RW jpeg_comp2_en. Set 1 if the scan will include component 2 (Cr).               Default 0.
// [   21] RW jpeg_comp1_ac_table_sel.                                                      Default 0.
// [   20] RW jpeg_comp1_dc_table_sel.                                                      Default 0.
// [18:17] RW jpeg_comp1_cnt_max.                                                           Default 0.
// [   16] RW jpeg_comp1_en. Set 1 if the scan will include component 1 (Cb).               Default 0.
// [   13] RW jpeg_comp0_ac_table_sel.                                                      Default 0.
// [   12] RW jpeg_comp0_dc_table_sel.                                                      Default 0.
// [10: 9] RW jpeg_comp0_cnt_max.                                                           Default 0.
// [    8] RW jpeg_comp0_en. Set 1 if the scan will include component 0 (Y).                Default 0.
// [    1] W  jpeg_coeff_init. Write 1 to this bit to initialize JPEG run length encoder.
// [    0] RW jpeg_en. 0=Disable JPEG encoder; 1=Enable JPEG encoder.                       Default 0.
#define HCODEC_VLC_JPEG_CTRL                       ((0x1d58  << 2) + 0xff620000)
// [   13] RW jpeg_coeff_buf_overfl. Write this bit to 1 to clear overfl.
// [   12] RW jpeg_coeff_buf_undrfl. Write this bit to 1 to clear undrfl.
// [   11] R  jpeg_coeff_buf_full.
// [   10] R  jpeg_coeff_buf_empty.
// [ 8: 0] R  jpeg_coeff_buf_level.
#define HCODEC_VLC_JPEG_COEFF_BUF_STAT             ((0x1d59  << 2) + 0xff620000)
// [   16] RW JPEG HUFFMAN table access mode. 0=Write; 1=Read.  Default 1.
// [ 8: 0] RW JPEG HUFFMAN table addr.                          Default 0.
#define HCODEC_VLC_HUFFMAN_ADDR                    ((0x1d5a  << 2) + 0xff620000)
// [19: 0] RW JPEG HUFFMAN table data.
#define HCODEC_VLC_HUFFMAN_DATA                    ((0x1d5b  << 2) + 0xff620000)
// bit[31:0] enc_mv_bits - including b8_mode and mvd
#define HCODEC_VLC_ENC_MV_BITS                     ((0x1d5c  << 2) + 0xff620000)
// bit[31:0] enc_coeff_bits - including cbp, token, trailing_sign, coeff_enc, h264_totzeros, h264_run
#define HCODEC_VLC_ENC_COEFF_BITS                  ((0x1d5d  << 2) + 0xff620000)
//
// Closing file:  vlc_regs.h
//
//
// Reading file:  qdct_regs.h
//
//========================================================================
//  QDCT module level register offset
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DOS_HCODEC_QDCT_CBUS_BASE = 0x0f
// -----------------------------------------------
// bit[31:28] - mb_info_state
#define HCODEC_QDCT_STATUS_CTRL                    ((0x1f00  << 2) + 0xff620000)
// bit[18]    - enable_free_clk_sad_top
// bit[17]    - enable_free_clk_ie_top
// bit[16]    - enable_free_clk_ie_sub
// bit[15]    - enable_free_clk_mc_out
// bit[14]    - enable_free_clk_i_pred_top
// bit[13]    - enable_free_clk_idct_top
// bit[12]    - enable_free_clk_iq_top
// bit[11]    - enable_free_clk_q_top
// bit[10]    - enable_free_clk_dc_buff_8
// bit[9]     - enable_free_clk_dct_top
// bit[8]     - enable_free_clk_mb_info
// bit[7]     - enable_free_clk_mb_buff
// bit[6]     - enable_free_clk_reg
// bit[5]     - ignore_1_include_2nd_half_c
// bit[4]     - ignore_1_include_2nd_half
// bit[3]     - ignore_t_p8x8
// bit[2]     - not_ignore_dc
// bit[1]     - ignore_small_lac_intra
// bit[0]     - disable_fast_zero_block
#define HCODEC_QDCT_CONFIG                         ((0x1f01  << 2) + 0xff620000)
// bit[31]    - ignore_lac_coeff_en
// bit[30:26] - ignore_lac_coeff_else
// bit[25:21] - ignore_lac_coeff_2
// bit[20:16] - ignore_lac_coeff_1
// bit[15]    - ignore_cac_coeff_en
// bit[14:10] - ignore_cac_coeff_else
// bit[9:5]   - ignore_cac_coeff_2
// bit[4:0]   - ignore_cac_coeff_1
#define HCODEC_IGNORE_CONFIG                       ((0x1f02  << 2) + 0xff620000)
// bit[31]    - ignore_t_lac_coeff_en
// bit[30:26] - ignore_t_lac_coeff_else
// bit[25:21] - ignore_t_lac_coeff_2
// bit[20:16] - ignore_t_lac_coeff_1
// bit[15]    - ignore_cdc_coeff_en
// bit[14]    - ignore_t_lac_coeff_else_le_3
// bit[13]    - ignore_t_lac_coeff_else_le_4
// bit[12]    - ignore_cdc_only_when_empty_cac_inter
// bit[11]    - ignore_cdc_only_when_one_empty_inter
// bit[10:9]  - ignore_cdc_range_max_inter // 0-0, 1-1, 2,-2, 3-3
// bit[8:7]   - ignore_cdc_abs_max_inter // 0-1, 1-2, 2,-3, 3-4
// bit[6]     - reserved
// bit[5]     - ignore_cdc_only_when_empty_cac_intra
// bit[4]     - ignore_cdc_only_when_one_empty_intra
// bit[3:2]   - ignore_cdc_range_max_intra // 0-0, 1-1, 2,-2, 3-3
// bit[1:0]   - ignore_cdc_abs_max_intra // 0-1, 1-2, 2,-3, 3-4
#define HCODEC_IGNORE_CONFIG_2                     ((0x1f03  << 2) + 0xff620000)
// --------------------------------------------
// MB DATA DDR Interface
// --------------------------------------------
#define HCODEC_QDCT_MB_START_PTR                   ((0x1f10  << 2) + 0xff620000)
#define HCODEC_QDCT_MB_END_PTR                     ((0x1f11  << 2) + 0xff620000)
#define HCODEC_QDCT_MB_WR_PTR                      ((0x1f12  << 2) + 0xff620000)
#define HCODEC_QDCT_MB_RD_PTR                      ((0x1f13  << 2) + 0xff620000)
#define HCODEC_QDCT_MB_LEVEL                       ((0x1f14  << 2) + 0xff620000)
// bit  [31]    disable_mbxy_ie_save
// bit  [30]    no_wait_after_q_cdc
// bit  [29]    ie_start_int_enable
// bit  [28]    ignore_t_p8x8
// bit  [27]    zero_mc_out_null_non_skipped_mb
// bit  [26]    no_mc_out_null_non_skipped_mb
// bit  [25]    mc_out_even_skipped_mb
// bit  [24]    mc_out_wait_cbp_ready
// bit  [23]    mc_out_wait_mb_type_ready
// bit  [22]    i_pred_int_enable
// bit  [21]    intra_sat8_enable
// bit  [20]    ie_sub_enable
// bit  [19]    i_pred_enable
// bit  [18]    iq_enable
// bit  [17]    idct_enable
// bit  [16]    no_zero_coeff_mb
// bit  [15]    add_zero_coeff_block
// bit  [14]    mb_pause_enable
// bit  [13]    q_enable
// bit  [12]    dct_enable
// bit  [11]    ignore_magic_word
// bit  [10]    mb_info_en
// bit  [9]     mb_info_soft_reset
// bit  [8]     mb_always_ready Set to 1 to ignore mb_level blocking DDR read
// bit  [7]     mb_ready_for_transfer (Read Only)
// bit  [6]     data_ready_for_transfer (Read Only)
// bits [5:3]   mb_endian       Set MB Endian inside DDR memory
// bit  [2]     mb_read_busy   Read Only - indicate DDR read busy
// bit  [1]     mb_read_en     Set to 1 to enable reading data from DDR memory
// bit  [0]     mb_soft_reset   Soft reset
#define HCODEC_QDCT_MB_CONTROL                     ((0x1f15  << 2) + 0xff620000)
// bit 31    transfer_length 0 - 32x64 Bits per request, 1 - 16x64 Bits per request  // default : 0
// bit 30    A_urgent  // default : 0
// bit 29:24 A_brst_num // default : 0x3f
// bit 23    reserved
// bit 22    read_till_zero
// bit 21:16 A_id  // default : 0x21
// bit 15:0  mb_level_hold // default : 0
#define HCODEC_QDCT_MB_MEM_CTL                     ((0x1f16  << 2) + 0xff620000)
// bit  [31:24] reserved
// bit  [23:16] vb_buff_level     -- Read only
// bit  [15:8]  vb_buff_wr_point -- RW
// bit  [7:0]   vb_buff_rd_point -- RW
#define HCODEC_QDCT_MB_BUFF                        ((0x1f17  << 2) + 0xff620000)
// bit [31:0] mb infor data begin magic word - default : 0xa55aaa55
#define HCODEC_QDCT_MB_MAGIC_WORD                  ((0x1f18  << 2) + 0xff620000)
// Read Only Register
// bit[19]   dct_ready_1
// bit[18]   dct_ready_0
// bit[17]   dct_rd_idx
// bit[16]   dct_wr_idx
// bit[15]   dct_srdy
// bit[14]   dct_rrdy
// bit[13]   Reserved
// bit[12:8] dct_block_number
// bit[7:4]  dct_rw_addr
// bit[3:0]  dct_status
#define HCODEC_QDCT_DCT_STATUS                     ((0x1f19  << 2) + 0xff620000)
// bit[24:23]  vlc_quant_count
// bit[22:16]  vlc_delta_quant_data
// bit[15:10]  vlc_quant_data
// bit[9:4]    vlc_prev_quant_data
// bit[3:0]    q_status
#define HCODEC_QDCT_Q_STATUS                       ((0x1f1a  << 2) + 0xff620000)
// bit[31:3] Reserved
// bit[2:0]  picture_type
#define HCODEC_QDCT_PIC_INFO                       ((0x1f1b  << 2) + 0xff620000)
// bit[31:28] Reserved
// bit[27:22] I_pic_quant_c
// bit[21:16] I_pic_quant
// bit[15]    reserved
// bit[14:12] quant_rem_c
// bit[11:8]  quant_per_c
// bit[7]     reserved
// bit[6:4]   quant_rem
// bit[3:0]   quant_per
#define HCODEC_QDCT_Q_QUANT_I                      ((0x1f1c  << 2) + 0xff620000)
// bit[31:28] Reserved
// bit[27:22] P_pic_quant_c
// bit[21:16] P_pic_quant
// bit[15]    reserved
// bit[14:12] quant_rem_c
// bit[11:8]  quant_per_c
// bit[7]     reserved
// bit[6:4]   quant_rem
// bit[3:0]   quant_per
#define HCODEC_QDCT_Q_QUANT_P                      ((0x1f1d  << 2) + 0xff620000)
// bit[31]    mb_info_pause
// bit[30:16] pause_mby
// bit[15:0]  pause_mbx
#define HCODEC_QDCT_MB_PAUSE_CTL                   ((0x1f1e  << 2) + 0xff620000)
// bit[31]   top_control_ready_i_pred
// bit[30:28]top_dma_status
// bit[27]   top_control_ready_ie
// bit[26:24]Reserved
// bit[23]   ul_mb
// bit[22]   right_mb
// bit[21]   top_mb
// bit[20]   left_mb
// bit[19:8] mb_x
// bit[7:6]  i_pred_ref_idx_L
// bit[5:4]  i_pred_ref_idx_UL
// bit[3:2]  i_pred_ref_idx_U
// bit[1:0]  i_pred_ref_idx_UR
#define HCODEC_QDCT_TOP_CONTROL                    ((0x1f1f  << 2) + 0xff620000)
// bit[31:0] top_base_addr - DDR Memory start address for save top Pixel
#define HCODEC_QDCT_TOP_BASE_MEM                   ((0x1f20  << 2) + 0xff620000)
// bit 15:13 Reserved
// bit 12    A_urgent  // default : 0
// bit 11:6  A_brst_num // default : 0x3f
// bit 5:0   A_id  // default : 0x22
#define HCODEC_QDCT_TOP_MEM_CTL                    ((0x1f21  << 2) + 0xff620000)
// bit [11:0] top_wrrsp_count
#define HCODEC_QDCT_TOP_WRRSP                      ((0x1f22  << 2) + 0xff620000)
// Bit[3:0] qdct_dbg_idx
#define HCODEC_QDCT_DBG_IDX                        ((0x1f23  << 2) + 0xff620000)
// Read Only
#define HCODEC_QDCT_DBG_READ                       ((0x1f24  << 2) + 0xff620000)
// [19:18] RW jdct_inflow_ctrl. JPEG DCT input flow control.                                Default 0.
//            0=No halt;
//            1=DCT halts request at end of each 8x8 block;
//            2=DCT halts request at end of each MCU.
// [17:16] RW jpeg_coeff_last_sel.                                                          Default 0.
//            Select at which point to finish processing, give update to AmRISC so it can control the next step.
//            0=Mark last coeff at the end of an 8x8 block;
//            1=Mark at the end of an MCU;
//            2=Mark at the end of a scan.
// [   15] RW jpeg_quant_sel_comp2. 0=Comp2 select Quantization table 0; 1=Select table 1.  Default 0.
// [   14] RW jpeg_v_factor_comp2. Component 2's vertical sampling factor.                  Default 0.
// [   13] RW jpeg_h_factor_comp2. Component 2's horizontal sampling factor.                Default 0.
// [   12] RW jpeg_comp2_en. Set 1 if the scan will include component 2 (Cr).               Default 0.
// [   11] RW jpeg_quant_sel_comp1. 0=Comp1 select Quantization table 0; 1=Select table 1.  Default 0.
// [   10] RW jpeg_v_factor_comp1. Component 1's vertical sampling factor.                  Default 0.
// [    9] RW jpeg_h_factor_comp1. Component 1's horizontal sampling factor.                Default 0.
// [    8] RW jpeg_comp1_en. Set 1 if the scan will include component 1 (Cb).               Default 0.
// [    7] RW jpeg_quant_sel_comp0. 0=Comp0 select Quantization table 0; 1=Select table 1.  Default 0.
// [    6] RW jpeg_v_factor_comp0. Component 0's vertical sampling factor.                  Default 0.
// [    5] RW jpeg_h_factor_comp0. Component 0's horizontal sampling factor.                Default 0.
// [    4] RW jpeg_comp0_en. Set 1 if the scan will include component 0 (Y).                Default 0.
// [ 3: 1] RW jdct_intr_sel. JPEG DCT interrupt select.                                     Default 0.
//            0=Disable intr;
//            1=Intr at end of each 8x8 block of DCT input;
//            2=Intr at end of each MCU of DCT input;
//            3=Intr at end of a scan of DCT input;
//            4=Intr at end of each 8x8 block of DCT output;
//            5=Intr at end of each MCU of DCT output;
//            6=Intr at end of a scan of DCT output.
// [    0] RW jpeg_en. 0=Disable JPEG QDCT; 1=Enable JPEG QDCT.                             Default 0.
#define HCODEC_QDCT_JPEG_CTRL                      ((0x1f25  << 2) + 0xff620000)
// [29:16] RW jpeg_x_end.   Picture X end.      Default 0.
// [13: 0] RW jpeg_x_start. Picture X start.    Default 0.
#define HCODEC_QDCT_JPEG_X_START_END               ((0x1f26  << 2) + 0xff620000)
// [29:16] RW jpeg_y_end.   Picture Y end.      Default 0.
// [13: 0] RW jpeg_y_start. Picture Y start.    Default 0.
#define HCODEC_QDCT_JPEG_Y_START_END               ((0x1f27  << 2) + 0xff620000)
// [    8] RW JPEG QUANT table access mode. 0=Write; 1=Read.    Default 1.
// [ 5: 0] RW JPEG QUANT table addr.                            Default 0.
#define HCODEC_QDCT_JPEG_QUANT_ADDR                ((0x1f28  << 2) + 0xff620000)
// [31: 0] RW JPEG QUANT table data.
#define HCODEC_QDCT_JPEG_QUANT_DATA                ((0x1f29  << 2) + 0xff620000)
// [    1] W  resume_jdct.
//            Write 1 to this bit will resume JPEG input engine when previously
//            it is halted by QDCT_JPEG_CTRL.jdct_inflow_ctrl.
// [    0] W  jpeg_sof.
//            Write 1 to this bit will start JPEG input engine.
#define HCODEC_QDCT_JPEG_SOF_RESUME                ((0x1f2a  << 2) + 0xff620000)
// [31:30] R  dct_st.       jdct_ctrl state. 0=IDLE; 1=WAIT; 2=DCT_REQ.
// [29:28] R  mfdin_comp.   Current component at pixel request to MFDIN.
// [27:14] R  mfdin_y.      Current Y at pixel request to MFDIN.
// [13: 0] R  mfdin_x.      Current X at pixel request to MFDIN.
#define HCODEC_QDCT_JPEG_DCT_STATUS0               ((0x1f2b  << 2) + 0xff620000)
// [15:12] R  JPEG Quant read MEM select.
// [11: 8] R  JPEG DCT2 write MEM select.
// [ 7: 4] R  JPEG DCT2 read MEM select.
// [ 3: 0] R  JPEG DCT1 write MEM select.
#define HCODEC_QDCT_JPEG_DCT_STATUS1               ((0x1f2c  << 2) + 0xff620000)
// [28:16] RW jdct_coeff1.  Default 13'h1D90; // 7568 = 4096 * sqrt(2) * (cos(Pi/8) + sin(Pi/8)) // 7569
// [12: 0] RW jdct_coeff0.  Default 13'h16A1; // 5793 = 4096 * sqrt(2)
#define HCODEC_QDCT_JPEG_DCT_COEFF01               ((0x1f2d  << 2) + 0xff620000)
// [28:16] RW jdct_coeff3.  Default 13'h0C3F; // 3135 = 4096 * sqrt(2) * (cos(Pi/8) - sin(Pi/8))
// [12: 0] RW jdct_coeff2.  Default 13'h08A9; // 2217 = 4096 * sqrt(2) * sin(Pi/8) // 2215
#define HCODEC_QDCT_JPEG_DCT_COEFF23               ((0x1f2e  << 2) + 0xff620000)
// [28:16] RW jdct_coeff5.  Default 13'h046A; // 1130 = 4096 * (cos(3Pi/16) - sin(3Pi/16))
// [12: 0] RW jdct_coeff4.  Default 13'h1631; // 5681 = 4096 * (cos(3Pi/16) + sin(3Pi/16)) // 5682
#define HCODEC_QDCT_JPEG_DCT_COEFF45               ((0x1f2f  << 2) + 0xff620000)
// [28:16] RW jdct_coeff7.  Default 13'h0C92; // 3218 = 4096 * (cos(Pi/16) - sin(Pi/16))
// [12: 0] RW jdct_coeff6.  Default 13'h12D0; // 4816 = 4096 * (cos(Pi/16) + sin(Pi/16))
#define HCODEC_QDCT_JPEG_DCT_COEFF67               ((0x1f30  << 2) + 0xff620000)
// [28:16] RW jdct_coeff9.  Default 13'h0FB1; // 4017 = 4096 * cos(Pi/16)
// [12: 0] RW jdct_coeff8.  Default 13'h0D4E; // 3406 = 4096 * cos(3Pi/16)
#define HCODEC_QDCT_JPEG_DCT_COEFF89               ((0x1f31  << 2) + 0xff620000)
#define HCODEC_QDCT_I_PRED_REF_WR_IDX              ((0x1f32  << 2) + 0xff620000)
#define HCODEC_QDCT_I_PRED_REF_WR_DATA             ((0x1f33  << 2) + 0xff620000)
// bit[29]  mb_info_latch_no_I16_pred_mode
// bit[28]  ie_dma_mbxy_use_i_pred
// bit[27]  ie_dma_read_write_use_ip_idx
// bit[26]  ie_start_use_top_dma_count
// bit[25]  i_pred_top_dma_rd_mbbot
// bit[24]  i_pred_top_dma_wr_disable
// bit[23]  i_pred_mix
// bit[22]  me_ab_rd_when_intra_in_p
// bit[21]  force_mb_skip_run_when_intra
// bit[20]  mc_out_mixed_type
// bit[19]  ie_start_when_quant_not_full
// bit[18]  mb_info_state_mix
// bit[17]  mb_type_use_mix_result
// bit[16]  me_cb_ie_read_enable
// bit[15]  ie_cur_data_from_me
// bit[14]  rem_per_use_table
// bit[13]  q_latch_int_enable
// bit[12]  q_use_table
// bit[11]  q_start_wait
// bit[10]  LUMA_16_LEFT_use_cur
// bit[9]   DC_16_LEFT_SUM_use_cur
// bit[8]   c_ref_ie_sel_cur
// bit[7]   c_ipred_perfect_mode
// bit[6]   ref_ie_ul_sel 0-old, 1-use next_set
// bit[5]   mb_type_use_ie_result
// bit[4]   detect_I16_from_I4
// bit[3]   ie_not_wait_ref_busy
// bit[2]   ie_I16_enable
// bit[1:0] ie_done_sel (0, 1, 2, -1)
#define HCODEC_QDCT_ADV_CONFIG                     ((0x1f34  << 2) + 0xff620000)
// bit [31:16] I16x16_weight
// bit [15:0]  I4x4_weight
#define HCODEC_IE_WEIGHT                           ((0x1f35  << 2) + 0xff620000)
// bit [31]  reserved
// bit [30] q_I16MB
// bit [29]  reserved
// bit [28]  reserved
// bit [27:23] quant_table_addr I4MB:[0,7], I16MB:[8:15], INTER:[16:23], Reserved:[24:31]
// bit [22]    quant_table_addr_update(when notupdate_rem_per) (read is arb_result : q_intra)
// bit [21:19] quant_rem_c
// bit [18:16] quant_rem_y
// bit [15:12] quant_per_c
// bit [11:8]  quant_per_y
// bit [7:2] quant
// bit [1] update_rem_per
// bit [0] clear_wait_status
#define HCODEC_Q_QUANT_CONTROL                     ((0x1f36  << 2) + 0xff620000)
#define HCODEC_MBBOT_EVEN_ADDR                     ((0x1f37  << 2) + 0xff620000)
#define HCODEC_MBBOT_ODD_ADDR                      ((0x1f38  << 2) + 0xff620000)
// bit [29:24] quant_table_data_3
// bit [21:16] quant_table_data_2
// bit [13:8]  quant_table_data_1
// bit [5:0]   quant_table_data_0
#define HCODEC_QUANT_TABLE_DATA                    ((0x1f39  << 2) + 0xff620000)
// bit [31:16] ie_sad_offset_I16
// bit [15:0] ie_sad_offset_I4
#define HCODEC_SAD_CONTROL_0                       ((0x1f3a  << 2) + 0xff620000)
// bit [31]     sad_soft_reset
// bit [30:27]  reserved
// bit [26:24]  ie_sad_shift_I16
// bit [22:20]  ie_sad_shift_I4
// bit [18:16]  me_sad_shift_INTER
// bit [15:0]   me_sad_offset_INTER
#define HCODEC_SAD_CONTROL_1                       ((0x1f3b  << 2) + 0xff620000)
// bit [31]     vlc_quant_rd_ptr
// bit [30]     vlc_quant_rd_ptr_update
// bit [29]     vlc_quant_wr_ptr
// bit [28]     vlc_quant_wr_ptr_update
// bit [27:26]  reserved
// bit [25:19]  vlc_delta_quant_1
// bit [18:13]  vlc_quant_1
// bit [12:6]   vlc_delta_quant_0
// bit [5:0]    vlc_quant_0
#define HCODEC_QDCT_VLC_QUANT_CTL_0                ((0x1f3c  << 2) + 0xff620000)
// bit [31:30]  me_sad_rd_idx
// bit [29]     me_sad_rd_idx_update
// bit [28:27]  me_sad_wr_idx
// bit [26]     me_sad_wr_idx_update
// bit [25:24]  ie_sad_rd_idx
// bit [23]     ie_sad_rd_idx_update
// bit [22:21]  ie_sad_wr_idx
// bit [20]     ie_sad_wr_idx_update
// bit [19:12]  Reserved
// bit [11:6]   vlc_max_delta_q_neg
// bit [5:0]    vlc_max_delta_q_pos
#define HCODEC_QDCT_VLC_QUANT_CTL_1                ((0x1f3d  << 2) + 0xff620000)
// bit[4] jdct_int
// bit[3] quant_latch
// bit[2] me_done
// bit[1] ie_start
// bit[0] i_pred_start
#define HCODEC_QDCT_INT_STATUS                     ((0x1f3e  << 2) + 0xff620000)
// bit[3]   mix_i_pred_wait_left_en
// bit[2:0] mc_pending_mb_count
#define HCODEC_QDCT_MIX_I_PRED_STATUS              ((0x1f3f  << 2) + 0xff620000)
// IE/ME share same cbus_base as QDCT
//
// bit[31]  active_ur_block
// bit[30]  active_ul_block
// bit[21]  disable_HENC_V_PRED_16
// bit[20]  disable_HENC_H_PRED_16
// bit[19]  disable_HENC_DC_PRED_16
// bit[18]  disable_HENC_HENC_HOR_UP_PRED
// bit[17]  disable_HENC_VERT_LEFT_PRED
// bit[16]  disable_HENC_HENC_HOR_DOWN_PRED
// bit[15]  disable_HENC_VERT_RIGHT_PRED
// bit[14]  disable_HENC_DIAG_DOWN_RIGHT_PRED
// bit[13]  disable_HENC_DIAG_DOWN_LEFT_PRED
// bit[12]  disable_HENC_DC_PRED
// bit[11]  disable_HENC_HOR_PRED
// bit[10]  disable_HENC_VERT_PRED
// bit[9]   ie_c_wait_ie_pause
// bit[8:4] max_ie_result_buff_count
// bit[3]   ie_wait_for_ie_result  // use for (max_ie_result_buff_count == 0) to wait every block
// bit[2]   reserved
// bit[1]   ie_enable
// bit[0]   ie_soft_reset
#define HCODEC_IE_CONTROL                          ((0x1f40  << 2) + 0xff620000)
// bit[31:12] Reserved
// bit[11:0]  mb_y
#define HCODEC_IE_MB_POSITION                      ((0x1f41  << 2) + 0xff620000)
// bit[31:16] me_skip_run
// bit[15:8]  reserved
// bit [7:4]  me_b8_mode
// bit [3:0]  ie_me_mb_type
#define HCODEC_IE_ME_MB_INFO                       ((0x1f42  << 2) + 0xff620000)
// bit[3]   ie_result_buff_enable
// bit[2]   ie_result_buff_soft_reset
// bit[1]   sad_enable
// bit[0]   ie_sad_soft_reset
#define HCODEC_SAD_CONTROL                         ((0x1f43  << 2) + 0xff620000)
// bit[31:16] - ie_result_buff_count - read only
// bit[14:12] -current_ie_result (pred_mode) - read only
// bit[11]  top_control_data_buff_wr_ptr - rd/wr
// bit[10]  top_control_data_buff_rd_ptr - rd/wr
// bit[9:5] ie_result_buff_wr_ptr        - rd/wr
// bit[4:0] ie_result_buff_rd_ptr        - rd/wr
#define HCODEC_IE_RESULT_BUFFER                    ((0x1f44  << 2) + 0xff620000)
// bit[63:0] ie_i4_pred_mode
#define HCODEC_IE_I4_PRED_MODE_HI                  ((0x1f45  << 2) + 0xff620000)
#define HCODEC_IE_I4_PRED_MODE_LO                  ((0x1f46  << 2) + 0xff620000)
// bit [31:9] reserved
// bit [8:4] i_pred_block_number
// bit [3:0] ie_c_pred_mode
#define HCODEC_IE_C_PRED_MODE                      ((0x1f47  << 2) + 0xff620000)
// 31:16 - Left, 0-select ie_pixel, 1-select mc_data_out
// 15:0  - Top,  0-select ie_pixel, 1-select mc_data_out
#define HCODEC_IE_CUR_REF_SEL                      ((0x1f48  << 2) + 0xff620000)
// bit[31]  enable_f_skip_1_step_3
// bit[30]  enable_f_skip_1_step_2
// bit[29]  enable_f_skip_1_step_1
// bit[28]  step_3_enable
// bit[27]  step_2_sub_pixel
// bit[26]  always_f_skip_step_3
// bit[25]  always_f_skip_step_2
// bit[24]  always_f_skip_step_1
// bit[23]  half_pixel_only
// bit[22:13] reserved
// bit[12]  adv_mv_enable
// bit[11]  sad_short_valid
// bit[10:9] mv_flexable_ctl 00:0x40, 01:0x80, 10:0xc0, 11 : 0x100
// bit[8]   no_md_ab_rd
// bit[7]   use_dct_state
// bit[6]   enable_free_clk_me_ctl
// bit[5]   enable_free_clk_me_ab
// bit[4]   enable_free_clk_me_cb
// bit[3]   reserved
// bit[2]   me_done_int_enable
// bit[1]   me_enable
// bit[0]   me_soft_reset
#define HCODEC_ME_CONTROL                          ((0x1f49  << 2) + 0xff620000)
// bit[31:28] Reserved
// bit[27:16] me_start_mby
// bit[15:12] Reserved
// bit[11:0]  me_start_mbx
#define HCODEC_ME_START_POSITION                   ((0x1f4a  << 2) + 0xff620000)
// bit [31:28] me_status - Read only
// bit [27:24] me_cb_status  // current buffer
// bit [23:20] me_ab_status  // anc buffer
// bit [19]    Reserved
// bit [18:16] me_ab_wr_ptr  // read only
// bit [15:4]  me_last_mbx
// bit [3:1]   me_ab_rd_ptr  // read only
// bit [0]     me_action
#define HCODEC_ME_STATUS                           ((0x1f4b  << 2) + 0xff620000)
// all Read-only
// bit [31:28] Reserved
// bit [27:16] me_ab_mbx
// bit [15:14] me_cb_wr_ptr
// bit [13:12] me_cb_rd_ptr
// bit [11:0]  me_cb_mbx
#define HCODEC_ME_DEBUG                            ((0x1f4c  << 2) + 0xff620000)
// bit[29:24] step_3_skip_line
// bit[23:18] step_2_skip_line
// bit[17:12] step_1_skip_line
// bit[11:6]  step_0_skip_line
// bit[5:0]   read_skip_line
#define HCODEC_ME_SKIP_LINE                        ((0x1f4d  << 2) + 0xff620000)
// bit 15:13 Reserved
// bit 12    A_urgent  // default : 0
// bit 11:6  A_brst_num // default : 0x3f
// bit 5:0   A_id  // default : 0x23
#define HCODEC_ME_AB_MEM_CTL                       ((0x1f4e  << 2) + 0xff620000)
// bit[31:24] anc_pic_canvas
// bit[23:12] max_me_mby_num
// bit[11:0]  max_me_mbx_num
#define HCODEC_ME_PIC_INFO                         ((0x1f4f  << 2) + 0xff620000)
// bit [23:12] me_sad_enough_1
// bit [11:0]  me_sad_enough_0
#define HCODEC_ME_SAD_ENOUGH_01                    ((0x1f50  << 2) + 0xff620000)
// bit [25:12] adv_mv_8x8_enough
// bit [11:0]  me_sad_enough_2
#define HCODEC_ME_SAD_ENOUGH_23                    ((0x1f51  << 2) + 0xff620000)
// bit [21:10] me_step0_big_sad
// bit [9:5] me_step0_close_mv_y
// bit [4:0] me_step0_close_mv_x
#define HCODEC_ME_STEP0_CLOSE_MV                   ((0x1f52  << 2) + 0xff620000)
// bit[31:24] force_skip_sad_3
// bit[23:16] force_skip_sad_2
// bit[15:08] force_skip_sad_1
// bit[07:00] force_skip_sad_0
#define HCODEC_ME_F_SKIP_SAD                       ((0x1f53  << 2) + 0xff620000)
// bit[31:24] force_skip_weight_3
// bit[23:16] force_skip_weight_2
// bit[15:08] force_skip_weight_1
// bit[07:00] force_skip_weight_0
#define HCODEC_ME_F_SKIP_WEIGHT                    ((0x1f54  << 2) + 0xff620000)
// Merge when (
//              (flex & me_merge_flex_en) |
//              (big_sad & me_merge_sad_en)|
//              ((~me_merge_flex_en)&(~me_merge_sad_en))
//            ) &
//            ( small_mv_diff |(~me_merge_small_mv_en))
//            & (me_merge_flex_en | me_merge_sad_en | me_merge_small_mv_en)
// bit[31]   me_merge_mv_en_16
// bit[30]   me_merge_small_mv_en_16
// bit[29]   me_merge_flex_en_16
// bit[28]   me_merge_sad_en_16
// bit[27]   me_merge_mv_en_8
// bit[26]   me_merge_small_mv_en_8
// bit[25]   me_merge_flex_en_8
// bit[24]   me_merge_sad_en_8
// bit[23:18] me_merge_mv_diff_16
// bit[17:12] me_merge_mv_diff_8
// bit[11:0] me_merge_min_sad
#define HCODEC_ME_MV_MERGE_CTL                     ((0x1f55  << 2) + 0xff620000)
// bit[31:24] mv_step_weight_1
// bit[23:16] mv_pre_weight_1
// bit [15:0] mv_step_weight_0
// bit[7:0]   mv_pre_weight_0
#define HCODEC_ME_MV_WEIGHT_01                     ((0x1f56  << 2) + 0xff620000)
// bit[31:24] mv_step_weight_3 (mv_step_weight_1_2nd)
// bit[23:16] mv_pre_weight_3 (mv_pre_weight_1_2nd)
// bit[15:8]  mv_step_weight_2
// bit[7:0]   mv_pre_weight_2
#define HCODEC_ME_MV_WEIGHT_23                     ((0x1f57  << 2) + 0xff620000)
// bit[31:24] me_sad_range_inc_3
// bit[23:16] me_sad_range_inc_2
// bit[15:8] me_sad_range_inc_1
// bit[7:0] me_sad_range_inc_0
#define HCODEC_ME_SAD_RANGE_INC                    ((0x1f58  << 2) + 0xff620000)
// bit[31:19]  reserved
// bit[18]     sub_relative_any_1_en
// bit[17]     sub_relative_any_2_en
// bit[16]     sub_relative_any_3_en
// bit[15]     sub_relative_any_4_en
// bit[14]     sub_relative_any_h_en
// bit[13]     sub_make_non_flex_fix
// bit[12]     sub_make_big_non_flex_fix
// bit[11:8]   sub_normal_mv_diff_16
// bit[7:4]    sub_normal_mv_diff_8
// bit[3:2]    Reserved
// bit[1]      sub_merge_enable_16
// bit[0]      sub_merge_enable_8
#define HCODEC_ME_SUB_MERGE_CTL                    ((0x1f59  << 2) + 0xff620000)
// bit[31:28]  sub_ref_mv_diff_near
// bit[27:24]  sub_ref_mv_diff_near_flex
// bit[23:20]  sub_ref_mv_diff
// bit[19:16]  sub_ref_mv_diff_flex
// bit[15:8]   sub_ref_mv_near_weight
// bit[7:0]    sub_ref_mv_weight
#define HCODEC_ME_SUB_REF_MV_CTL                   ((0x1f5a  << 2) + 0xff620000)
// bit[31:24]  sub_weight_max_sad
// bit[23:16]  sub_any_range_sad
// bit[15:8]   sub_any_min_sad
// bit[7:0]    sub_any_max_sad
#define HCODEC_ME_SUB_ANY_WEIGHT_SAD               ((0x1f5b  << 2) + 0xff620000)
// bit[31:24]  sub_fix_sad
// bit[23:16]  sub_fix_diff_sad
// bit[15:8]   sub_sad_flex_adj
// bit[7:0]    sub_big_non_flex_fix_sad
#define HCODEC_ME_SUB_FIX_SAD                      ((0x1f5c  << 2) + 0xff620000)
// bit[31:24]  sub_fix_min_sad
// bit[23:16]  sub_fix_min_diff_sad
// bit[15:8]   sub_fix_min_sad_2
// bit[7:0]    sub_fix_min_diff_sad_2
#define HCODEC_ME_SUB_FIX_MIN_SAD                  ((0x1f5d  << 2) + 0xff620000)
// bit[31:24]  sub_snap_to_ref_max_sad
// bit[23]     sub_snap_to_ref_non_flex
// bit[22:16]  sub_snap_to_ref_mv_diff
// bit[15:4]   sub_glitch_mv_sad
// bit[3:0]    sub_glitch_mv_diff
#define HCODEC_ME_SUB_SNAP_GLITCH                  ((0x1f5e  << 2) + 0xff620000)
// bit[31:20]  sad_act_limit
// bit[19:8]   s_a_any_sad
// bit[7]      Reserved
// bit[6:5]    sub_merge_method
// bit[4]      use_sub_act_result
// bit[3]      s_a_rnd
// bit[2]      Reserved
// bit[1]      sub_act_en_16
// bit[0]      sub_act_en
#define HCODEC_ME_SUB_ACT_CTL                      ((0x1f5f  << 2) + 0xff620000)
// bit[31:16]  reserved
// bit[15:0]   me_weight
#define HCODEC_ME_WEIGHT                           ((0x1f60  << 2) + 0xff620000)
// bit[31]  ready_update
// bit[30]  data_update
// bit[29:28] reserved
// bit[27:22] me_quant_0
// bit[21]  ie_sad_ready_0
// bit[20:18]  Reserved
// bit[17:16]  me_sad_mv_type_0
// bit[15:0] me_sad_0
#define HCODEC_ME_SAD_0                            ((0x1f61  << 2) + 0xff620000)
// bit[31]  ready_update
// bit[30]  data_update
// bit[29:28] reserved
// bit[27:22] me_quant_1
// bit[21]  me_sad_ready_1
// bit[20:18]  Reserved
// bit[17:16]  me_sad_mv_type_1
// bit[15:0] me_sad_1
#define HCODEC_ME_SAD_1                            ((0x1f62  << 2) + 0xff620000)
// bit[31]  ready_update
// bit[30]  data_update
// bit[29:28] reserved
// bit[27:22] me_quant_2
// bit[21]  me_sad_ready_2
// bit[20:18]  Reserved
// bit[17:16]  me_sad_mv_type_2
// bit[15:0] me_sad_2
#define HCODEC_ME_SAD_2                            ((0x1f63  << 2) + 0xff620000)
// bit[31]  ready_update
// bit[30]  data_update
// bit[29:28] reserved
// bit[27:22] me_quant_3
// bit[21]  me_sad_ready_3
// bit[20:18]  Reserved
// bit[17:16]  me_sad_mv_type_3
// bit[15:0] me_sad_3
#define HCODEC_ME_SAD_3                            ((0x1f64  << 2) + 0xff620000)
// bit[31]  ready_update
// bit[30]  data_update
// bit[29:28] reserved
// bit[27:22] ie_quant_0
// bit[21]  ie_sad_ready_0
// bit[20]   I4/I16 (0-I4MB, 1-I16MB)
// bit[19:0] ie_sad_0
#define HCODEC_IE_SAD_0                            ((0x1f65  << 2) + 0xff620000)
// bit[31]  ready_update
// bit[30]  data_update
// bit[29:28] reserved
// bit[27:22] ie_quant_1
// bit[21]  ie_sad_ready_1
// bit[20]   I4/I16 (0-I4MB, 1-I16MB)
// bit[19:0] ie_sad_1
#define HCODEC_IE_SAD_1                            ((0x1f66  << 2) + 0xff620000)
// bit[31]  ready_update
// bit[30]  data_update
// bit[29:28] reserved
// bit[27:22] ie_quant_2
// bit[21]  ie_sad_ready_2
// bit[20]   I4/I16 (0-I4MB, 1-I16MB)
// bit[19:0] ie_sad_2
#define HCODEC_IE_SAD_2                            ((0x1f67  << 2) + 0xff620000)
// bit[31]  ready_update
// bit[30]  data_update
// bit[29:28] reserved
// bit[27:22] ie_quant_3
// bit[21]  ie_sad_ready_3
// bit[20]   I4/I16 (0-I4MB, 1-I16MB)
// bit[19:0] ie_sad_3
#define HCODEC_IE_SAD_3                            ((0x1f68  << 2) + 0xff620000)
// bit[31]   enable_large_diff_16x8
// bit[30]   enable_large_diff_8x16
// bit[29:16] adv_mv_8x8_weight
// bit[15:14] reserved
// bit[13:0] adv_mv_4x4x4_weight
#define HCODEC_ADV_MV_CTL0                         ((0x1f69  << 2) + 0xff620000)
// bit[31:16] adv_mv_16x16_weight
// bit[15]   enable_large_diff_16x16
// bit[14:0] adv_mv_16_8_weight
#define HCODEC_ADV_MV_CTL1                         ((0x1f6a  << 2) + 0xff620000)
#define HCODEC_ADV_MV_CTL2                         ((0x1f6b  << 2) + 0xff620000)
// bit[31]    v3_skip_enable
// bit[30]    v3_step_1_weight_enable // for step1, will only use pre_weight for block0, only step_weight for block 1,2,3
// bit[29]    v3_l2_skip_only_use_l2_sad // set to 1 may allow l1 maybe not skip
// bit[28]    v3_mv_sad_weight_enable
// bit[27]    v3_ipred_type_enable
// bit[25:12] force_skip_sad_1
// bit[11:0]  force_skip_sad_0
#define HCODEC_V3_SKIP_CONTROL                     ((0x1f6c  << 2) + 0xff620000)
// bit[18:16] top_ipred_type_count
// bit[15:14] Reserved
// bit[13:12] top_ipred_type_rd_idx
// bit[11:10] top_ipred_type_wr_idx
// bit[9]   left_ipred_type_ready
// bit[8]   top_ipred_type_ready
// bit[7:6] left_mv_idx
// bit[5:4] top_mv_idx
// bit[3] - left_mv_ready
// bit[2:0] top_mv_ready
#define HCODEC_V3_TOP_LEFT_CTL                     ((0x1f6d  << 2) + 0xff620000)
#define HCODEC_V3_TOP_MV                           ((0x1f6e  << 2) + 0xff620000)
#define HCODEC_V3_LEFT_MV                          ((0x1f6f  << 2) + 0xff620000)
// bit[31:30] reserved
// bit[29:16] v3_skip_weight_1
// bit[15:12] reserved
// bit[11:0]  v3_skip_weight_0
#define HCODEC_V3_SKIP_WEIGHT                      ((0x1f70  << 2) + 0xff620000)
// bit[31:28] reserved
// bit[27:16] v3_l1_f_skip_max_sad
// bit[15:12] reserved
// bit[11:0]  v3_l1_skip_max_sad
#define HCODEC_V3_L1_SKIP_MAX_SAD                  ((0x1f71  << 2) + 0xff620000)
// bit[31:16] force_skip_sad_2
// bit[15:0]  v3_skip_weight_2
#define HCODEC_V3_L2_SKIP_WEIGHT                   ((0x1f72  << 2) + 0xff620000)
// bit[21:16] v3_mv_sad_table_addr 0-15 table_step_0
// bit[11:0]  v3_mv_sad
#define HCODEC_V3_MV_SAD_TABLE                     ((0x1f73  << 2) + 0xff620000)
// [31:16] v3_ie_f_zero_sad_i16
// [15:0]  v3_ie_f_zero_sad_i4
#define HCODEC_V3_F_ZERO_CTL_0                     ((0x1f74  << 2) + 0xff620000)
// [25]    v3_no_ver_when_top_zero_en
// [24]    v3_no_hor_when_left_zero_en
// [23:16] v3_max_I16_H_num    // 0 means no break
// [15:0]  v3_me_f_zero_sad
#define HCODEC_V3_F_ZERO_CTL_1                     ((0x1f75  << 2) + 0xff620000)
#define HCODEC_V3_TOP_INTRA_INFO                   ((0x1f76  << 2) + 0xff620000)
#define HCODEC_V3_LEFT_INTRA_INFO                  ((0x1f77  << 2) + 0xff620000)
// [31:24]  C_ipred_weight_H
// [23:16]  C_ipred_weight_V
// [15:8]   I4_ipred_weight_else
// [7:0]    I4_ipred_weight_most
#define HCODEC_V3_IPRED_TYPE_WEIGHT_0              ((0x1f78  << 2) + 0xff620000)
// [31:24]  I16_ipred_weight_DC
// [23:16]  I16_ipred_weight_H
// [15:8]   I16_ipred_weight_V
// [7:0]    C_ipred_weight_DC
#define HCODEC_V3_IPRED_TYPE_WEIGHT_1              ((0x1f79  << 2) + 0xff620000)
// [31:16]  v3_left_small_max_me_sad
// [15:0]   v3_left_small_max_ie_sad
#define HCODEC_V3_LEFT_SMALL_MAX_SAD               ((0x1f7a  << 2) + 0xff620000)
// (qr==7) & (qp==15) means force zero block
// [31:26]  v4_force_q_r_intra
// [25:20]  v4_force_q_r_inter
// [19]     v4_force_q_y_enable
// [18:16]  v4_force_qr_y
// [15:12]  v4_force_qp_y
// [11:0]   v4_force_skip_sad
#define HCODEC_V4_FORCE_SKIP_CFG                   ((0x1f7b  << 2) + 0xff620000)
// v5 Complexity // Y(256 pixel per MB) and C(128 pixel per MB)
// For every 4x4 block, calculate average and Add abs(pixel-average) together
// bit[31:16] v5_diff_sum_C
// bit[15:0]  v5_diff_sum_Y
#define HCODEC_V5_MB_DIFF_SUM                      ((0x1f7c  << 2) + 0xff620000)
// bit[31:24] v5_small_diff_cnt_C
// bit[23:16] v5_small_diff_C
// bit[15:8]  v5_small_diff_cnt_Y
// bit[7:0]   v5_small_diff_Y
#define HCODEC_V5_SMALL_DIFF_CNT                   ((0x1f7d  << 2) + 0xff620000)
// bit[31:29] Reserved
// bit[28:24] v5_simple_block_cnt // 0 -15 Y 16-23 C
// bit[23:20] v5_simple_pixel_cnt
// bit[19:18] v5_simple_dq_wr_ptr
// bit[17:16] v5_simple_dq_rd_ptr
// bit[15:12] v5_simple_dq (Read Only)
// bit[11:8]  v5_simple_me_weight(Read Only)
// bit[7] v5_use_small_diff_cnt
// bit[6] v5_simple_mb_inter_all_en
// bit[5] v5_simple_mb_inter_8x8_en
// bit[4] v5_simple_mb_inter_16_8_en
// bit[3] v5_simple_mb_inter_16x16_en
// bit[2] v5_simple_mb_intra_en
// bit[1] v5_simple_mb_C_en
// bit[0] v5_simple_mb_Y_en
#define HCODEC_V5_SIMPLE_MB_CTL                    ((0x1f7e  << 2) + 0xff620000)
// bit[31:28] v5_simple_dq_shift
// bit[27:24] v5_simple_dq_6(-7 to +7)
// bit[23:20] v5_simple_dq_5(-7 to +7)
// bit[19:16] v5_simple_dq_4(-7 to +7)
// bit[15:12] v5_simple_dq_3(-7 to +7)
// bit[11:08] v5_simple_dq_2(-7 to +7)
// bit[07:04] v5_simple_dq_1(-7 to +7)
// bit[03:00] v5_simple_dq_0(-7 to +7)
#define HCODEC_V5_SIMPLE_MB_DQUANT                 ((0x1f7f  << 2) + 0xff620000)
// bit[31:28] v5_simple_me_weight_shift
// bit[27:24] v5_simple_me_weight_6(-7 to +7)
// bit[23:20] v5_simple_me_weight_5(-7 to +7)
// bit[19:16] v5_simple_me_weight_4(-7 to +7)
// bit[15:12] v5_simple_me_weight_3(-7 to +7)
// bit[11:08] v5_simple_me_weight_2(-7 to +7)
// bit[07:04] v5_simple_me_weight_1(-7 to +7)
// bit[03:00] v5_simple_me_weight_0(-7 to +7)
#define HCODEC_V5_SIMPLE_MB_ME_WEIGHT              ((0x1f80  << 2) + 0xff620000)
//
// Closing file:  qdct_regs.h
//

#endif // DOS_REGISTER_H

#if 0
#define Wr(addr, data) *(volatile uint32_t *)(addr)=(data)
#define Rd(addr) *(volatile uint32_t *)(addr)
#define Wr_reg_bits(reg, val, start, len) \
  Wr(reg, ((Rd(reg) & ~(((1L<<(len))-1)<<(start))) | ((uint32_t)(val) << (start))))
#endif

//
// Reading file:  ./register_map.h
//
// synopsys translate_off
// synopsys translate_on
//
// Reading file:  stb_define.h
//
// synopsys translate_off
// synopsys translate_on
// -----------------------------------------------
// CBUS_BASE:  STB_CBUS_BASE = 0x18
// -----------------------------------------------
// There are two instantiations under one CBUS slave.  Each CBUS slave can support
// 256 registers.  Each demux is allocated 128 registers so set the offset in
// the middle
// Copy this define but don't add a base address
#define SECOND_DEMUX_OFFSET_0  0x50
#define THIRD_DEMUX_OFFSET_0   0xa0
//========================================================================
//  STB TOP Registers				    (8'hf0 - 8'hf7)
//========================================================================
// bit 30:28 -- ciplus_o_sel
// bit 27:26 -- ciplus_i_sel
// bit 25 -- use FAIL fro TS2
// bit 24 -- use FAIL fro TS1
// bit 23 -- use FAIL fro TS0
// bit 22 -- invert fec_error for S2P1
// bit 21 -- invert fec_data for S2P1
// bit 20 -- invert fec_sync for S2P1
// bit 19 -- invert fec_valid for S2P1
// bit 18 -- invert fec_clk for S2P1
// bit 17:16 -- fec_s_sel for S2P1  00 - select TS0, 01 -- select TS1, 10 -- select TS2, 11 - reserved
// Bit 15 -- enable_des_pl_clk
// Bit 14:13 -- reserved
// Bit 12:10 -- ts_out_select, 0-TS0, 1-TS1, 2-TS2, 3,4-Reserved, 5-S2P1, 6-S2P0, 7-File
// bit 9:8 -- des_i_sel 00 -- select_fec_0, 01 -- select_fec_1, 10 -- select_fec_2, 11 - reserved
// bit 7 -- enable_des_pl
// bit 6 -- invert fec_error for S2P0
// bit 5 -- invert fec_data for S2P0
// bit 4 -- invert fec_sync for S2P0
// bit 3 -- invert fec_valid for S2P0
// bit 2 -- invert fec_clk for S2P0
// bit 1:0 -- fec_s_sel for S2P0  00 - select TS0, 01 -- select TS1, 10 -- select TS2, 11 - reserved
#define STB_TOP_CONFIG                             ((0x18f0  << 2) + 0xffd00000)
// 31:28 - s2p1_clk_div
// 27:24 - s2p0_clk_div
// 23    - s2p1_disable
// 22    - s2p0_disable
// 21    - Reserved
// 20 -- TS_OUT_error_INVERT
// 19 -- TS_OUT_data_INVERT
// 18 -- TS_OUT_sync_INVERT
// 17 -- TS_OUT_valid_INVERT
// 16 -- TS_OUT_clk_INVERT
// 15:8 -- TS_package_length_sub_1 (default : 187)
//  7:0 -- fec_sync_byte (default : 0x47)
#define TS_TOP_CONFIG                              ((0x18f1  << 2) + 0xffd00000)
// Bit 25:24 -- transport_scrambling_control_odd_2 // should be 3
// Bit 23:16 -- file_m2ts_skip_bytes
// Bit 15:8 -- des_out_dly
// Bit 7:6 -- transport_scrambling_control_odd // should be 3
// Bit 5 -- ts_hiu_enable
// Bit 4:0 -- fec_clk_div
#define TS_FILE_CONFIG                             ((0x18f2  << 2) + 0xffd00000)
// Bit 19:14 -- des_2 ts pl state   -- Read Only
// Bit 13:8 -- des ts pl state   -- Read Only
// Bit 3:0 PID index to 8 PID to get key-set
// auto increse after TS_PL_PID_DATA read/write
#define TS_PL_PID_INDEX                            ((0x18f3  << 2) + 0xffd00000)
// Bit 13 -- PID match disble
// Bit 12:0 -- PID
#define TS_PL_PID_DATA                             ((0x18f4  << 2) + 0xffd00000)
#define COMM_DESC_KEY0                             ((0x18f5  << 2) + 0xffd00000)
#define COMM_DESC_KEY1                             ((0x18f6  << 2) + 0xffd00000)
#define COMM_DESC_KEY_RW                           ((0x18f7  << 2) + 0xffd00000)
// CI+ Register defines
// Bits[31:0] of the key
#define CIPLUS_KEY0                                ((0x18f8  << 2) + 0xffd00000)
// Bits[63:32] of the key
#define CIPLUS_KEY1                                ((0x18f9  << 2) + 0xffd00000)
// Bits[95:64] of the key
#define CIPLUS_KEY2                                ((0x18fa  << 2) + 0xffd00000)
// Bits[127:96] of the key
#define CIPLUS_KEY3                                ((0x18fb  << 2) + 0xffd00000)
// bit[5] write AES IV B value
// bit[4] write AES IV A value
// bit[3] write AES B key
// bit[2] write AES A key
// bit[1] write DES B key
// bit[0] write DES A key
#define CIPLUS_KEY_WR                              ((0x18fc  << 2) + 0xffd00000)
// [15:8]   TS out delay.  This controls the rate at which the CIplus module drives TS out
// [3]      General enable for the ciplus module
// [2]      AES CBC disable (default should be 0 to enable AES CBC)
// [1]      AES Enable
// [0]      DES Eanble
#define CIPLUS_CONFIG                              ((0x18fd  << 2) + 0xffd00000)
// bit[31:28] AES IV endian
// bit[27:24] AES message out endian
// bit[23:20] AES message in endian
// bit[19:16] AES key endian
// bit[15:11]  unused
// bit[10:8]  DES message out endian
// bit[6:4]   DES message in endian
// bit[2:0]   DES key endian
#define CIPLUS_ENDIAN                              ((0x18fe  << 2) + 0xffd00000)
// bit 15:8 - des_out_dly_2
// bit   7 - reserved
// Bit   6-- enable_des_pl_clk_2
// bit   5 - enable_des_pl_2
// bit 4:2 -- use_des_2  bit[2] -- demux0, bit[3] -- demux1, bit[4] -- demux2
// bit 1:0 -- des_i_sel_2 00 -- select_fec_0, 01 -- select_fec_1, 10 -- select_fec_2, 11 - reserved
#define COMM_DESC_2_CTL                            ((0x18ff  << 2) + 0xffd00000)
//
// NOTE:  Don't process the demux registers using the standard create_headers.... perl script.
//        Instead, since the demux has multiple instances (and many registers) use a separate
//        script to create a separate stb_define.h for C-code.
//========================================================================
//  STB Registers				    (8'h00 - 8'h4f)
//
//========================================================================
// STB registers are 8'h0x
// Bit 15:0 -- version number : 0x0002  (v0.01)
// Bit 15 -- fec_core_select 1 - select descramble output
// Bit 14:12 -  fec_select 0-TS0, 1-TS1, 2-TS2, 3,4-Reserved, 5-S2P1, 6-S2P0, 7-File
// Bit 11 -- FEC_CLK
// Bit 10 -- SOP
// Bit 9 -- D_VALID
// Bit 8 -- D_FAIL
// Bit 7:0 -- D_DATA 7:0
// bit 31 -- enable_free_clk_fec_data_valid
// bit 30 -- enable_free_clk_stb_reg
// bit 29 -- always_use_pes_package_length
// bit 28 -- disable_pre_incomplete_section_fix
// bit 27 -- pointer_field_multi_pre_en
// bit 26 -- ignore_pre_incomplete_section
// bit 25 -- video2_enable
// bit 24:22 -- video2_type
// bit 21 -- do_not_trust_pes_package_length
// bit 20 (bit 4) -- Bypass use recoder path
// bit 19 (bit 3) -- clear_PID_continuity_counter_valid
// bit 18 (bit 2) -- Disable Splicing
// bit 17 (bit 1) -- Insert PES_STRONG_SYNC in Audio PES
// bit 16 (bit 0) -- Insert PES_STRONG_SYNC in Video PES
// Bit 15 - do not trust section length
// Bit 14 - om cmd push even zero
// Bit 13 - set_buff_ready_even_not_busy
// Bit 12 - SUB, OTHER PES interrupt at beginning of PES
// Bit 11 - discard_av_package -- for ts_recorder use only
// Bit 10 - ts_recorder_select  0:after PID filter 1:before PID filter
// Bit 9 - ts_recorder_enable
// Bit 8 - (table_id == 0xff) means section_end
// Bit 7 - do not send uncomplete section
// Bit 6 - do not discard duplicate package
// Bit 5 - search SOP when trasport_error_indicator
// Bit 4 - stb demux enable
// Bit 3 - do not reset state machine on SOP
// Bit 2 - search SOP when error happened ( when ignore_fail_n_sop, will have this case)
// Bit 1 - do not use SOP input ( check FEC sync byte instead )
// Bit 0 - ignore fec_error bit when non sop ( check error on SOP only)
// bit 15:8 demux package length - 1 ( default : 187 )
// bit 7:0 default is 0x47
// bit 31:16 -- filter memory write data hi[31:16]
// bit 15:0 -- filter memory write data low [15:0]
// bit 31:24 -- advanced setting hi
// bit 23:16 -- advanced setting low
// bit 15 -- filter memory write data request
// bit 7:0 -- filter memory write addr
// bit 13:8 demux state  -- read only
// bit 7:4 -- maxnum section filter compare address
// bit 3:0 -- maxnum PID filter compare address
// bit 15 - transport_error_indicator
// bit 14 - payload_unit_start_indicator
// bit 13 - transport_priority
// bit 12:0 - PID
// bit 7:6 transport_scrambling_control
// bit 5:4 adaptation_field_control
// bit 3:0 continuity_counter
// bit 15:12 -- om_cmd_count (read only)
// bit  11:9 -- overflow_count // bit  11:9 -- om_cmd_wr_ptr (read only)
// bit   8:6 -- om_overwrite_count // bit   8:6 -- om_cmd_rd_ptr (read only)
// bit   5:3 -- type_stb_om_w_rd (read only)
// bit     2 -- unit_start_stb_om_w_rd (read only)
// bit     1 -- om_cmd_overflow (read only)
// bit     0 -- om_cmd_pending (read)
// bit     0 -- om_cmd_read_finished (write)
// bit 15:9 // bit 14:8 -- count_stb_om_w_rd  (read only)
// bit 8:0  // bit  7:0 -- start_stb_om_wa_rd (read only)
// bit 11:0 -- offset for section data
// bit 31:16 -- base address for section buffer group 0 (*0x400 to get real address)
// bit 15:0 -- base address for section buffer group 1 (*0x400 to get real address)
// bit 31:16 -- ba2e address for section buffer group 2 (*0x400 to get real address)
// bit 15:0 -- base address for section buffer group 3 (*0x400 to get real address)
// bit 3:0 -- section buffer size for group 0 (bit used,  for example, 10 means 1K)
// bit 7:4 -- section buffer size for group 1
// bit 11:8 -- section buffer size for group 2
// bit 15:12 -- section buffer size for group 3
// section buffer busy status for buff 31:0 ( Read Only )
// section buffer write status for buff 31:0 -- Read
// clear buffer status ( buff READY and BUSY ) -- write
// bit 4:0 -- SEC_BUFFER_INDEX   RW
// bit 12:8 -- SEC_BUFFER_NUMBER for the INDEX buffer  Read_Only
// bit 14 -- output_section_buffer_valid
// bit 15 -- section_reset_busy (Read Only)
// bit 9:5 -- BYPASS PID number
// bit 4:0 -- PCR PID number
// bit 15:0 -- stream_id filter bit enable
// bit 7:0 -- stream_id filter target
// bit 12 -- PCR_EN
// bit 11:0 -- PCR90K_DIV
// bit 31:0 -- PCR[31:0] R/W
// bit 31:0 -- VPTS[31:0] R/W
// bit 31:0 -- VDTS[31:0] R/W
// bit 31:0 -- APTS[31:0] R/W
// bit 31:0 -- SPTS[31:0] R/W
// read -- status, write 1 clear status
// bit 15 -- SUB_PTS[32]
// bit 14 -- AUDIO_PTS[32]
// bit 13 -- VIDEO_DTS[32]
// bit 12 -- VIDEO_PTS[32]
// bit 3 -- sub_pts_ready
// bit 2 -- audio_pts_ready
// bit 1 -- video_dts_ready
// bit 0 -- video_pts_ready
// bit 3:0 --
//  0 -- adaptation_field_length[7:0], adaption_field_byte_1[7:0]
//  1 -- stream_id[7:0], pes_header_bytes_left[7:0]
//  2 -- pes_package_bytes_left[15:0]
//  3 -- pes_ctr_byte[7:0], pes_flag_byte[7:0]
//
// read only
// bit[31] -- no_match_record_en
// bit[30:16] - reserved
// default : 0x807f
// bit 15:9  -- MAX OM DMA COUNT  (default: 0x40)
// bit 8:0   -- LAST ADDR OF OM ADDR (default: 127)
// 15:0  WRITE 1 CLEAR to clear interrupt source
//12 -- INPUT_TIME_OUT
//11 -- PCR_ready
//10 -- audio_splicing_point
// 9 -- video_splicing_point
// 8 -- other_PES_int
// 7 -- sub_PES_int
// 6 -- discontinuity
// 5 -- duplicated_pack_found
// 4 -- New PDTS ready
// 3 -- om_cmd_buffer ready for access
// 2 -- section buffer ready
// 1 -- transport_error_indicator
// 0 -- TS ERROR PIN
// Bit 5:3 - demux om write endian control for bypass
// Bit 2:0 - demux om write endian control for section
// When Bit 31 - 1 write will indicate all type use sepertate endian (Write Only)
// Bit 23:21 - demux om write endian control for OTHER_PES_PACKET
// Bit 20:18 - demux om write endian control for SCR_ONLY_PACKET
// Bit 17:15 - demux om write endian control for SUB_PACKET
// Bit 14:12 - demux om write endian control for AUDIO_PACKET
// Bit 11:9  - demux om write endian control for VIDEO_PACKET
//
// When Bit 31 - 0 write will indicate all type else use Bit 8:6
// Bit 8:6 - demux om write endian control for else
// Bit 15:8 -- last_burst_threshold
// Bit 7 -- use hi_bsf interface
// Bit 6:2 - fec_clk_div
// Bit 1 ts_source_sel
// Bit 0 - Hiu TS generate enable
// bit 15:0 -- base address for section buffer start (*0x10000 to get real base)
// bit 11 -- mask bit for OTHER_PES_AHB_DMA_EN
// bit 10 -- mask bit for SUB_AHB_DMA_EN
// bit 9 -- mask bit for BYPASS_AHB_DMA_EN
// bit 8 -- mask bit for SECTION_AHB_DMA_EN
// bit 7 -- mask bit for recoder stream
// bit 6:0 -- mask bit for each type
// bit 31:0 -- vb_wr_ptr for video PDTS
// bit 31:0 -- ab_wr_ptr for audio PDTS
// bit 20:0 -- SB_WRITE_PTR (sb_wr_ptr << 3 == byte write position)
// bit 19:0 -- SB_START (sb_start << 12 == byte address);
// bit 20:0 -- SB_SIZE (sb_size << 3 == byte size, 16M maximun)
// bit 31:0 -- sb_wr_ptr for sub PES
// bit 31:16 -- ob_wr_ptr for other PES
// bit 20:0 -- OB_WRITE_PTR (ob_wr_ptr << 3 == byte write position)
// bit 19:0 -- OB_START (ob_start << 12 == byte address);
// bit 20:0 -- OB_SIZE (ob_size << 3 == byte size, 16M maximun)
// bit 31:0 -- ob_wr_ptr for sub PES
// 15:0  DEMUX interrupt MASK
// 9 -- splicing_point
// 8 -- other_PES_int
// 7 -- sub_PES_int
// 6 -- discontinuity
// 5 -- duplicated_pack_found
// 4 -- New PDTS ready
// 3 -- om_cmd_buffer ready for access
// 2 -- section buffer ready
// 1 -- transport_error_indicator
// 0 -- TS ERROR PIN
// 31:16 VIDEO PID filter data
//15 -- splicing VIDEO PID change enable
//14:10 -- VIDEO PID FILTER ADDRESS
// 9 -- PES splicing active (Read Only)
// 8 -- splicing active (Read Only)
// 7:0  splicing countdown (Read Only)
// 31:16 AUDIO PID filter data
//15 -- splicing AUDIO PID change enable
//14:10 -- AUDIO PID FILTER ADDRESS
// 9 -- PES splicing active (Read Only)
// 8 -- splicing active (Read Only)
// 7:0  splicing countdown (Read Only)
// 23:16 M2TS_SKIP_BYTES
// 15:8 LAST TS PACKAGE BYTE COUNT (Read Only)
// 7:0  PACKAGE BYTE COUNT (Read Only)
// 15:0 2 bytes strong sync add to PES
// bit 15 -- stb_om_ren
// bit 14:11 -- reserved
// bit  10:0 -- OM_DATA_RD_ADDR
// bit 15:0 -- OM_DATA_RD
// AUTO STOP SETTING for 32 channels
// 4-nbits per channel
// when write
// bit 3 -- set section active
// bit 2:0 -- auto stop after count (0 means never stop)
// when read
// bit 3 -- current active status (1 - active, 0 - stopped )
// bit 2:0 -- count down to auto stop
// section 31:24
// section 23:16
// section 15:8
// section 7:0
// bit 31:0 reset channel status - each bit reset each channel
// read -- 32 channel status
// bit 4 -- video_stamp_use_dts
// bit 3 -- audio_stamp_sync_1_en
// bit 2 -- audio_stamp_insert_en
// bit 1 -- video_stamp_sync_1_en
// bit 0 -- video_stamp_insert_en
// Write : Bit[4:0] secter filter number for reset
// Read  : select according to output_section_buffer_valid :
//         per bit per section buffer valid status
//         or section_buffer_ignore
// bit[31:0] - channel_reset_timeout_disable
// bit[31] - no_match_reset_timeout_disable
// bit[30:0] input_time_out_int_cnt (0 -- means disable) Wr-setting, Rd-count
// bit[31:0] - channel_packet_count_disable
// bit[31] - no_match_packet_count_disable
// bit[30:0] input_packet_count
// bit[31:0] channel_record_enable
// bit[31:0] channel_process_enable
// bit[31:24] small_sec_size ((n+1) * 256 Bytes)
// bit[23:16] small_sec_rd_ptr
// bit[15:8]  small_sec_wr_ptr
// bit[7:2]   reserved
// bit[1] small_sec_wr_ptr_wr_enable
// bit[0] small_section_enable
// bit[31:0] small_sec_start_addr
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  stb_define.h
//
//
// Reading file:  periphs_reg.h
//
// $periphs/rtl/periphs_core register defines for the
// APB bus
// ------------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  SC_CBUS_BASE = 0x94
// -----------------------------------------------
#define SMARTCARD_REG0                             ((0x9400  << 2) + 0xffd00000)
#define SMARTCARD_REG1                             ((0x9401  << 2) + 0xffd00000)
#define SMARTCARD_REG2                             ((0x9402  << 2) + 0xffd00000)
#define SMARTCARD_STATUS                           ((0x9403  << 2) + 0xffd00000)
#define SMARTCARD_INTR                             ((0x9404  << 2) + 0xffd00000)
#define SMARTCARD_REG5                             ((0x9405  << 2) + 0xffd00000)
#define SMARTCARD_REG6                             ((0x9406  << 2) + 0xffd00000)
#define SMARTCARD_FIFO                             ((0x9407  << 2) + 0xffd00000)
#define SMARTCARD_REG8                             ((0x9408  << 2) + 0xffd00000)
// ------------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  UART0_CBUS_BASE = 0x90
// -----------------------------------------------
#define UART0_WFIFO                                ((0x9000  << 2) + 0xffd00000)
#define UART0_RFIFO                                ((0x9001  << 2) + 0xffd00000)
#define UART0_CONTROL                              ((0x9002  << 2) + 0xffd00000)
#define UART0_STATUS                               ((0x9003  << 2) + 0xffd00000)
#define UART0_MISC                                 ((0x9004  << 2) + 0xffd00000)
#define UART0_REG5                                 ((0x9005  << 2) + 0xffd00000)
// ------------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  UART1_CBUS_BASE = 0x8c
// -----------------------------------------------
#define UART1_WFIFO                                ((0x8c00  << 2) + 0xffd00000)
#define UART1_RFIFO                                ((0x8c01  << 2) + 0xffd00000)
#define UART1_CONTROL                              ((0x8c02  << 2) + 0xffd00000)
#define UART1_STATUS                               ((0x8c03  << 2) + 0xffd00000)
#define UART1_MISC                                 ((0x8c04  << 2) + 0xffd00000)
#define UART1_REG5                                 ((0x8c05  << 2) + 0xffd00000)
// ------------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  UART2_CBUS_BASE = 0x88
// -----------------------------------------------
#define UART2_WFIFO                                ((0x8800  << 2) + 0xffd00000)
#define UART2_RFIFO                                ((0x8801  << 2) + 0xffd00000)
#define UART2_CONTROL                              ((0x8802  << 2) + 0xffd00000)
#define UART2_STATUS                               ((0x8803  << 2) + 0xffd00000)
#define UART2_MISC                                 ((0x8804  << 2) + 0xffd00000)
#define UART2_REG5                                 ((0x8805  << 2) + 0xffd00000)
// ------------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  UART3_CBUS_BASE = 0x84
// -----------------------------------------------
#define UART3_DF_REG_A73                           ((0x8400  << 2) + 0xffd00000)
#define UART3_DF_REG_A74                           ((0x8401  << 2) + 0xffd00000)
#define UART3_DF_REG_A75                           ((0x8402  << 2) + 0xffd00000)
#define UART3_DF_REG_A76                           ((0x8403  << 2) + 0xffd00000)
#define UART3_DF_REG_A77                           ((0x8404  << 2) + 0xffd00000)
#define UART3_DF_REG_A78                           ((0x8405  << 2) + 0xffd00000)
#define UART3_DF_REG_A79                           ((0x8406  << 2) + 0xffd00000)
#define UART3_DF_REG_A80                           ((0x8407  << 2) + 0xffd00000)
#define UART3_DF_REG_A81                           ((0x8408  << 2) + 0xffd00000)
#define UART3_DF_REG_A82                           ((0x8409  << 2) + 0xffd00000)
#define UART3_DF_REG_A83                           ((0x8410  << 2) + 0xffd00000)
#define UART3_DF_REG_A84                           ((0x8411  << 2) + 0xffd00000)
#define UART3_DF_REG_A85                           ((0x8412  << 2) + 0xffd00000)
#define UART3_DF_REG_A86                           ((0x8413  << 2) + 0xffd00000)
#define UART3_DF_REG_A87                           ((0x8414  << 2) + 0xffd00000)
#define UART3_DF_REG_A88                           ((0x8415  << 2) + 0xffd00000)
#define UART3_DF_REG_A89                           ((0x8416  << 2) + 0xffd00000)
#define UART3_DF_REG_A96                           ((0x8417  << 2) + 0xffd00000)
#define UART3_DF_REG_A97                           ((0x8418  << 2) + 0xffd00000)
#define UART3_DF_REG_A128                          ((0x8420  << 2) + 0xffd00000)
#define UART3_DF_REG_A129                          ((0x8421  << 2) + 0xffd00000)
#define UART3_DF_REG_A130                          ((0x8422  << 2) + 0xffd00000)
#define UART3_DF_REG_A131                          ((0x8423  << 2) + 0xffd00000)
#define UART3_DF_REG_A132                          ((0x8424  << 2) + 0xffd00000)
#define UART3_DF_REG_A133                          ((0x8425  << 2) + 0xffd00000)
#define UART3_DF_REG_A134                          ((0x8426  << 2) + 0xffd00000)
#define UART3_DF_REG_A135                          ((0x8427  << 2) + 0xffd00000)
#define UART3_DF_REG_A136                          ((0x8428  << 2) + 0xffd00000)
// ----------------------------
// SANA (Stream Analyzer)
// ----------------------------
// ------------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  SANA_CBUS_BASE = 0x30
// -----------------------------------------------
// [31:16] - ddr_setting
// [15]    - disable_stream_clock_gating
// [14:13] - mem_pd_ctl_sana
// [6:4]   - stream_fetch_endian
// [3]     - use_parser_vbuf_wp
// [2]     - use_parser_vbuf2_wp
// [1]     - stream_fetch_busy - Read Only
// [0]     - stream_fetch_enable
#define SANA_STREAM_CONTROL                        ((0x3020  << 2) + 0xffd00000)
#define SANA_STREAM_START_ADDR                     ((0x3021  << 2) + 0xffd00000)
#define SANA_STREAM_END_ADDR                       ((0x3022  << 2) + 0xffd00000)
// SW stream_buffer_wr_ptr
#define SANA_STREAM_WR_PTR                         ((0x3023  << 2) + 0xffd00000)
#define SANA_STREAM_RD_PTR                         ((0x3024  << 2) + 0xffd00000)
//[31:0] stream_buffer_level - read only
#define SANA_STREAM_LEVEL                          ((0x3025  << 2) + 0xffd00000)
// [31:29] stream_buffer_hole 256*(4^0) bytes
// [28:23] stream_fifo_hole
// [22:16] stream_fifo_level
// [15]    stream_fifo_wr_ptr_update_en
// [14:8]  stream_fifo_wr_ptr
// [7]     stream_fifo_rd_ptr_update_en
// [6:0]   stream_fifo_rd_ptr
#define SANA_STREAM_FIFO_CTL                       ((0x3026  << 2) + 0xffd00000)
// [31:18] - Reserved
// [17]    - sana_int_enable
// [16]    - sana_int_level (default : 0(pulse))
// [15]    - disable_shift_clock_gating
// [14]    - startcode_protect -- TODO
// [8:6]   - sft_valid_wr_position (default : 3 (at least 24 bits available))
// [5:4]   - emulate_code_length_sub_1(Default : 2)
// [3]     - emulation_auto_on_startcode(Default : 0)
// [2:1]   - start_code_length_sub_1(Default : 2)
// [0]     - stream_shift_enable(Default : 0)
#define SANA_SHIFT_CONTROL                         ((0x3027  << 2) + 0xffd00000)
// [31:0]  - max 4-bytes start code (Default : 0x00000100)
#define SANA_SHIFT_STARTCODE                       ((0x3028  << 2) + 0xffd00000)
// [31:0]  - max 4-bytes emulate code (Default : 0x00000300)
#define SANA_SHIFT_EMULATECODE                     ((0x3029  << 2) + 0xffd00000)
// [3]     - sana_int
// [2]     - startcode_searching
// [1]     - emulation_check_on
// [0]     - startcode_check_on
#define SANA_SHIFT_STATUS                          ((0x302a  << 2) + 0xffd00000)
// [31:0] sana_shifted_data - read only
#define SANA_SHIFTED_DATA                          ((0x302b  << 2) + 0xffd00000)
// [31:0] shift_byte_count[31:0]
#define SANA_SHIFT_BYTE_COUNT                      ((0x302c  << 2) + 0xffd00000)
// [31:28] - shift_byte_count[35:32]
// [27:20] - element_read_data[31:24]
// [10]    - bytealign
// [9]     - signed_element
// [8]     - start_element_read
// [7]     - shift_busy
// [6:0]   - shift_bits
#define SANA_SHIFT_COMMAND                         ((0x302d  << 2) + 0xffd00000)
// 31:8    - element_read_data[23:0]
//  7:2    - element_read_length
//  1:0    - element_read_state
#define SANA_ELEMENT_RESULT                        ((0x302e  << 2) + 0xffd00000)
// support up to 8 masters, one bit per master
// 23:16   - lock_release (Write 1 to release)
// 15:8    - lock_req (write 1 to request)
//  7:0    - lock_result (Read Only)
#define ATOM_LOCK                                  ((0x302f  << 2) + 0xffd00000)
// ------------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  I2C_M_0_CBUS_BASE = 0x7c
// -----------------------------------------------
#define I2C_M_0_CONTROL_REG                        ((0x7c00  << 2) + 0xffd00000)
    #define     I2C_M_MANUAL_SDA_I        26
    #define     I2C_M_MANUAL_SCL_I        25
    #define     I2C_M_MANUAL_SDA_O        24
    #define     I2C_M_MANUAL_SCL_O        23
    #define     I2C_M_MANUAL_EN           22
    #define     I2C_M_DELAY_MSB           21
    #define     I2C_M_DELAY_LSB           12
    #define     I2C_M_DATA_CNT_MSB        11
    #define     I2C_M_DATA_CNT_LSB        8
    #define     I2C_M_CURR_TOKEN_MSB      7
    #define     I2C_M_CURR_TOKEN_LSB      4
    #define     I2C_M_ERROR               3
    #define     I2C_M_STATUS              2
    #define     I2C_M_ACK_IGNORE          1
    #define     I2C_M_START               0
#define I2C_M_0_SLAVE_ADDR                         ((0x7c01  << 2) + 0xffd00000)
#define I2C_M_0_TOKEN_LIST0                        ((0x7c02  << 2) + 0xffd00000)
#define I2C_M_0_TOKEN_LIST1                        ((0x7c03  << 2) + 0xffd00000)
#define I2C_M_0_WDATA_REG0                         ((0x7c04  << 2) + 0xffd00000)
#define I2C_M_0_WDATA_REG1                         ((0x7c05  << 2) + 0xffd00000)
#define I2C_M_0_RDATA_REG0                         ((0x7c06  << 2) + 0xffd00000)
#define I2C_M_0_RDATA_REG1                         ((0x7c07  << 2) + 0xffd00000)
// -----------------------------------------------
// CBUS_BASE:  I2C_M_1_CBUS_BASE = 0x78
// -----------------------------------------------
#define I2C_M_1_CONTROL_REG                        ((0x7800  << 2) + 0xffd00000)
#define I2C_M_1_SLAVE_ADDR                         ((0x7801  << 2) + 0xffd00000)
#define I2C_M_1_TOKEN_LIST0                        ((0x7802  << 2) + 0xffd00000)
#define I2C_M_1_TOKEN_LIST1                        ((0x7803  << 2) + 0xffd00000)
#define I2C_M_1_WDATA_REG0                         ((0x7804  << 2) + 0xffd00000)
#define I2C_M_1_WDATA_REG1                         ((0x7805  << 2) + 0xffd00000)
#define I2C_M_1_RDATA_REG0                         ((0x7806  << 2) + 0xffd00000)
#define I2C_M_1_RDATA_REG1                         ((0x7807  << 2) + 0xffd00000)
// ------------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  I2C_M_2_CBUS_BASE = 0x74
// -----------------------------------------------
#define I2C_M_2_CONTROL_REG                        ((0x7400  << 2) + 0xffd00000)
#define I2C_M_2_SLAVE_ADDR                         ((0x7401  << 2) + 0xffd00000)
#define I2C_M_2_TOKEN_LIST0                        ((0x7402  << 2) + 0xffd00000)
#define I2C_M_2_TOKEN_LIST1                        ((0x7403  << 2) + 0xffd00000)
#define I2C_M_2_WDATA_REG0                         ((0x7404  << 2) + 0xffd00000)
#define I2C_M_2_WDATA_REG1                         ((0x7405  << 2) + 0xffd00000)
#define I2C_M_2_RDATA_REG0                         ((0x7406  << 2) + 0xffd00000)
#define I2C_M_2_RDATA_REG1                         ((0x7407  << 2) + 0xffd00000)
// ------------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  I2C_M_3_CBUS_BASE = 0x70
// -----------------------------------------------
#define I2C_M_3_CONTROL_REG                        ((0x7000  << 2) + 0xffd00000)
#define I2C_M_3_SLAVE_ADDR                         ((0x7001  << 2) + 0xffd00000)
#define I2C_M_3_TOKEN_LIST0                        ((0x7002  << 2) + 0xffd00000)
#define I2C_M_3_TOKEN_LIST1                        ((0x7003  << 2) + 0xffd00000)
#define I2C_M_3_WDATA_REG0                         ((0x7004  << 2) + 0xffd00000)
#define I2C_M_3_WDATA_REG1                         ((0x7005  << 2) + 0xffd00000)
#define I2C_M_3_RDATA_REG0                         ((0x7006  << 2) + 0xffd00000)
#define I2C_M_3_RDATA_REG1                         ((0x7007  << 2) + 0xffd00000)
// ------------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  PWM_AB_CBUS_BASE = 0x6c
// -----------------------------------------------
#define PWM_PWM_A                                  ((0x6c00  << 2) + 0xffd00000)
#define PWM_PWM_B                                  ((0x6c01  << 2) + 0xffd00000)
#define PWM_MISC_REG_AB                            ((0x6c02  << 2) + 0xffd00000)
#define PWM_DELTA_SIGMA_AB                         ((0x6c03  << 2) + 0xffd00000)
#define PWM_TIME_AB                                ((0x6c04  << 2) + 0xffd00000)
#define PWM_A2                                     ((0x6c05  << 2) + 0xffd00000)
#define PWM_B2                                     ((0x6c06  << 2) + 0xffd00000)
#define PWM_BLINK_AB                               ((0x6c07  << 2) + 0xffd00000)
// ------------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  PWM_CD_CBUS_BASE = 0x68
// -----------------------------------------------
#define PWM_PWM_C                                  ((0x6800  << 2) + 0xffd00000)
#define PWM_PWM_D                                  ((0x6801  << 2) + 0xffd00000)
#define PWM_MISC_REG_CD                            ((0x6802  << 2) + 0xffd00000)
#define PWM_DELTA_SIGMA_CD                         ((0x6803  << 2) + 0xffd00000)
#define PWM_TIME_CD                                ((0x6804  << 2) + 0xffd00000)
#define PWM_C2                                     ((0x6805  << 2) + 0xffd00000)
#define PWM_D2                                     ((0x6806  << 2) + 0xffd00000)
#define PWM_BLINK_CD                               ((0x6807  << 2) + 0xffd00000)
// ------------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  PWM_EF_CBUS_BASE = 0x64
// -----------------------------------------------
#define PWM_PWM_E                                  ((0x6400  << 2) + 0xffd00000)
#define PWM_PWM_F                                  ((0x6401  << 2) + 0xffd00000)
#define PWM_MISC_REG_EF                            ((0x6402  << 2) + 0xffd00000)
#define PWM_DELTA_SIGMA_EF                         ((0x6403  << 2) + 0xffd00000)
#define PWM_TIME_EF                                ((0x6404  << 2) + 0xffd00000)
#define PWM_E2                                     ((0x6405  << 2) + 0xffd00000)
#define PWM_F2                                     ((0x6406  << 2) + 0xffd00000)
#define PWM_BLINK_EF                               ((0x6407  << 2) + 0xffd00000)
// ------------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  MSR_CLK_CBUS_BASE = 0x60
// -----------------------------------------------
#define MSR_CLK_DUTY                               ((0x6000  << 2) + 0xffd00000)
#define MSR_CLK_REG0                               ((0x6001  << 2) + 0xffd00000)
#define MSR_CLK_REG1                               ((0x6002  << 2) + 0xffd00000)
#define MSR_CLK_REG2                               ((0x6003  << 2) + 0xffd00000)
#define MSR_CLK_REG3                               ((0x6004  << 2) + 0xffd00000)
#define MSR_CLK_REG4                               ((0x6005  << 2) + 0xffd00000)
#define MSR_CLK_REG5                               ((0x6006  << 2) + 0xffd00000)
// ------------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  STEAM_CBUS_BASE = 0x2c
// -----------------------------------------------
// bit 31:24 -- event_length
// bit 23:22 -- bus_1st_sel_1  //00-gpio, 01-reserved, 10-addr, 11-data
// bit 21:20 -- bus_2nd_sel_1
// bit 19:18 -- bus_1st_sel_0
// bit 17:16 -- bus_2nd_sel_0
// bit 15:0 -- set output value (output 1 will read according to external input)
#define STREAM_EVENT_INFO                          ((0x2c00  << 2) + 0xffd00000)
// bit 31    -- force_parity_1
// bit 30    -- LSB_first
// bit 31:20 -- reserved
// bit 19:16 -- toggle point index
// bit 15:8  -- output togle point1
// bit 7:0   -- output togle point0 (0xff means input)
#define STREAM_OUTPUT_CONFIG                       ((0x2c01  << 2) + 0xffd00000)
// bit 31:24 -- clock_divide_ext
// bit 23:20 -- s_bus_start ( sclk, sdataout, sdatain)  // 0 means no s_bus used
// bit 19    -- no_sclk_on_pin // will use internal write clock and read clock (like RS232)
// bit 18    -- invert_sclk_in
// bit 17    -- sdata_send_busy  // indicate one data is sending -- read only
// bit 16    -- one_sdata_received // set when one sdata is received, can write 0 to clear
// bit 15    -- sdata_parity  // (write -- 0-even, 1-odd) (read -- received parity check)
// bit 14    -- sdata_send_type  // 0 -- 8 bits  1 -- 32 bits ( for fujitsu only )
// bit 13    -- sdata_receive_type // 0 -- 8 bits only  1 -- 8/32 bits
// bit 12    -- invert_request_out
// bit 11:8  -- request_out_sel  // 0 means disable output
// bit 7:0   --  stop_request_count
#define C_D_BUS_CONTROL                            ((0x2c02  << 2) + 0xffd00000)
// bit 31:0  -- serial data (write: output one data, read: input data)
#define C_DATA                                     ((0x2c03  << 2) + 0xffd00000)
// bit 31:28 bus_width_1
// bit 27:24 bus_start_pin_1
// bit 23:16 bus_sel_chang_point_1
// bit 15:12 bus_width_0
// bit 11:08 bus_start_pin_0
// bit 07:00 bus_sel_chang_point_0
#define STREAM_BUS_CONFIG                          ((0x2c04  << 2) + 0xffd00000)
// bit 31:24 clock_divide
// bit 23:20 clock_output_sel  -- 0 means disable clock output
// bit 19 -- inc_event_addr
// bit 18 -- async_fifo_endian
// bit 17 -- send_to_async_fifo
// bit 16 -- data_in_serial_lsb
// bit 15 -- invert_no_wait_condition_0
// bit 14 -- invert_no_wait_condition_1
// bit 13 -- invert_no_wait_condition_2
// bit 12 -- invert_data_bus
// bit 11 -- invert_clock_in
// bit 10 -- event_wait_clk_en
// bit 9 -- data_in_serial
// bit 8 -- invert_data_in_clk
// bit 7:4  -- data_in_begin
// bit 3:0  -- data_in_clk_sel
#define STREAM_DATA_IN_CONFIG                      ((0x2c05  << 2) + 0xffd00000)
// wait condition and irq should not be connected to 0, 0 means disable)
// bit 31:28 -- no_wait_condition_0   (0 means disable this condition)
// bit 27:24 -- no_wait_condition_1   (0 means disable this condition)
// bit 23:20 -- no_wait_condition_2   (0 means disable this condition)
// bit 19:16 -- irq_input_sel         (0 means disable this interrupt)
// bit 15:13 -- interrupt_status (read) clear status (write) (ext 0, ext 1, transfer end)
// bit 12 -- enable_sdata_irq
// bit 11 -- invert_irq_0
// bit 10 -- invert_irq_1
// bit  9 -- enable_transfer_end_irq
// bit  8 -- enable_second_ext_irq
// bit 7:0 -- no_wait_condition_check_point (0xff means no check)
#define STREAM_WAIT_IRQ_CONFIG                     ((0x2c06  << 2) + 0xffd00000)
// bit 31:24 -- event address
// bit 23:16 -- event data
// bit 15:1 -- event repeat times  (0 means one time event)
// bit 0  -- Start Event (write) event_busy (read)
#define STREAM_EVENT_CTL                           ((0x2c07  << 2) + 0xffd00000)
// ------------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  SYNC_FIFO_CBUS_BASE = 0x28
// -----------------------------------------------
#define ASYNC_FIFO_REG0                            ((0x2800  << 2) + 0xffd00000)
#define ASYNC_FIFO_REG1                            ((0x2801  << 2) + 0xffd00000)
    #define ASYNC_FIFO_FLUSH_STATUS     31
    #define ASYNC_FIFO_ERR              30
    #define ASYNC_FIFO_FIFO_EMPTY       29
    #define ASYNC_FIFO_TO_HIU           24
    #define ASYNC_FIFO_FLUSH            23
    #define ASYNC_FIFO_RESET            22
    #define ASYNC_FIFO_WRAP_EN          21
    #define ASYNC_FIFO_FLUSH_EN         20
    #define ASYNC_FIFO_RESIDUAL_MSB     19
    #define ASYNC_FIFO_RESIDUAL_LSB     15
    #define ASYNC_FIFO_FLUSH_CNT_MSB    14
    #define ASYNC_FIFO_FLUSH_CNT_LSB    0
#define ASYNC_FIFO_REG2                            ((0x2802  << 2) + 0xffd00000)
    #define ASYNC_FIFO_FIFO_FULL        26
    #define ASYNC_FIFO_FILL_STATUS      25
    #define ASYNC_FIFO_SOURCE_MSB       24
    #define ASYNC_FIFO_SOURCE_LSB       23
    #define ASYNC_FIFO_ENDIAN_MSB       22
    #define ASYNC_FIFO_ENDIAN_LSB       21
    #define ASYNC_FIFO_FILL_EN          20
    #define ASYNC_FIFO_FILL_CNT_MSB     19
    #define ASYNC_FIFO_FILL_CNT_LSB     0
#define ASYNC_FIFO_REG3                            ((0x2803  << 2) + 0xffd00000)
    #define ASYNC_FLUSH_SIZE_IRQ_MSB    15
    #define ASYNC_FLUSH_SIZE_IRQ_LSB    0
#define ASYNC_FIFO_REG4                            ((0x2804  << 2) + 0xffd00000)
#define ASYNC_FIFO_REG5                            ((0x2805  << 2) + 0xffd00000)
// ------------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  SYNC_FIFO2_CBUS_BASE = 0x24
// -----------------------------------------------
#define ASYNC_FIFO2_REG0                           ((0x2400  << 2) + 0xffd00000)
#define ASYNC_FIFO2_REG1                           ((0x2401  << 2) + 0xffd00000)
#define ASYNC_FIFO2_REG2                           ((0x2402  << 2) + 0xffd00000)
#define ASYNC_FIFO2_REG3                           ((0x2403  << 2) + 0xffd00000)
#define ASYNC_FIFO2_REG4                           ((0x2404  << 2) + 0xffd00000)
#define ASYNC_FIFO2_REG5                           ((0x2405  << 2) + 0xffd00000)
// ------------------------------------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  SPIFC_CBUS_BASE = 0x50
// -----------------------------------------------
#define SPI_FLASH_CMD                              ((0x5000  << 2) + 0xffd00000)
    #define SPI_FLASH_READ    31
    #define SPI_FLASH_WREN    30
    #define SPI_FLASH_WRDI    29
    #define SPI_FLASH_RDID    28
    #define SPI_FLASH_RDSR    27
    #define SPI_FLASH_WRSR    26
    #define SPI_FLASH_PP      25
    #define SPI_FLASH_SE      24
    #define SPI_FLASH_BE      23
    #define SPI_FLASH_CE      22
    #define SPI_FLASH_DP      21
    #define SPI_FLASH_RES     20
    #define SPI_HPM           19
    #define SPI_FLASH_USR     18
    #define SPI_FLASH_USR_ADDR 15
    #define SPI_FLASH_USR_DUMMY 14
    #define SPI_FLASH_USR_DIN   13
    #define SPI_FLASH_USR_DOUT   12
    #define SPI_FLASH_USR_DUMMY_BLEN   10
    #define SPI_FLASH_USR_CMD     0
#define SPI_FLASH_ADDR                             ((0x5001  << 2) + 0xffd00000)
    #define SPI_FLASH_BYTES_LEN 24
    #define SPI_FLASH_ADDR_START 0
#define SPI_FLASH_CTRL                             ((0x5002  << 2) + 0xffd00000)
    #define SPI_ENABLE_AHB    17
    #define SPI_SST_AAI       16
    #define SPI_RES_RID       15
    #define SPI_FREAD_DUAL    14
    #define SPI_READ_READ_EN  13
    #define SPI_CLK_DIV0      12
    #define SPI_CLKCNT_N      8
    #define SPI_CLKCNT_H      4
    #define SPI_CLKCNT_L      0
#define SPI_FLASH_CTRL1                            ((0x5003  << 2) + 0xffd00000)
#define SPI_FLASH_STATUS                           ((0x5004  << 2) + 0xffd00000)
#define SPI_FLASH_CTRL2                            ((0x5005  << 2) + 0xffd00000)
#define SPI_FLASH_CLOCK                            ((0x5006  << 2) + 0xffd00000)
#define SPI_FLASH_USER                             ((0x5007  << 2) + 0xffd00000)
#define SPI_FLASH_USER1                            ((0x5008  << 2) + 0xffd00000)
#define SPI_FLASH_USER2                            ((0x5009  << 2) + 0xffd00000)
#define SPI_FLASH_USER3                            ((0x500a  << 2) + 0xffd00000)
#define SPI_FLASH_USER4                            ((0x500b  << 2) + 0xffd00000)
#define SPI_FLASH_SLAVE                            ((0x500c  << 2) + 0xffd00000)
#define SPI_FLASH_SLAVE1                           ((0x500d  << 2) + 0xffd00000)
#define SPI_FLASH_SLAVE2                           ((0x500e  << 2) + 0xffd00000)
#define SPI_FLASH_SLAVE3                           ((0x500f  << 2) + 0xffd00000)
#define SPI_FLASH_C0                               ((0x5010  << 2) + 0xffd00000)
#define SPI_FLASH_C1                               ((0x5011  << 2) + 0xffd00000)
#define SPI_FLASH_C2                               ((0x5012  << 2) + 0xffd00000)
#define SPI_FLASH_C3                               ((0x5013  << 2) + 0xffd00000)
#define SPI_FLASH_C4                               ((0x5014  << 2) + 0xffd00000)
#define SPI_FLASH_C5                               ((0x5015  << 2) + 0xffd00000)
#define SPI_FLASH_C6                               ((0x5016  << 2) + 0xffd00000)
#define SPI_FLASH_C7                               ((0x5017  << 2) + 0xffd00000)
#define SPI_FLASH_B8                               ((0x5018  << 2) + 0xffd00000)
#define SPI_FLASH_B9                               ((0x5019  << 2) + 0xffd00000)
#define SPI_FLASH_B10                              ((0x501a  << 2) + 0xffd00000)
#define SPI_FLASH_B11                              ((0x501b  << 2) + 0xffd00000)
#define SPI_FLASH_B12                              ((0x501c  << 2) + 0xffd00000)
#define SPI_FLASH_B13                              ((0x501d  << 2) + 0xffd00000)
#define SPI_FLASH_B14                              ((0x501e  << 2) + 0xffd00000)
#define SPI_FLASH_B15                              ((0x501f  << 2) + 0xffd00000)
// ------------------------------------------------------------------------------------
//spicc 0
// -----------------------------------------------
// CBUS_BASE:  SPICC0_CBUS_BASE = 0x4c
// -----------------------------------------------
#define SPICC0_RXDATA                              ((0x4c00  << 2) + 0xffd00000)
#define SPICC0_TXDATA                              ((0x4c01  << 2) + 0xffd00000)
#define SPICC0_CONREG                              ((0x4c02  << 2) + 0xffd00000)
#define SPICC0_INTREG                              ((0x4c03  << 2) + 0xffd00000)
#define SPICC0_DMAREG                              ((0x4c04  << 2) + 0xffd00000)
#define SPICC0_STATREG                             ((0x4c05  << 2) + 0xffd00000)
#define SPICC0_PERIODREG                           ((0x4c06  << 2) + 0xffd00000)
#define SPICC0_TESTREG                             ((0x4c07  << 2) + 0xffd00000)
#define SPICC0_DRADDR                              ((0x4c08  << 2) + 0xffd00000)
#define SPICC0_DWADDR                              ((0x4c09  << 2) + 0xffd00000)
#define SPICC0_LD_CNTL0                            ((0x4c0a  << 2) + 0xffd00000)
#define SPICC0_LD_CNTL1                            ((0x4c0b  << 2) + 0xffd00000)
#define SPICC0_LD_RADDR                            ((0x4c0c  << 2) + 0xffd00000)
#define SPICC0_LD_WADDR                            ((0x4c0d  << 2) + 0xffd00000)
#define SPICC0_ENHANCE_CNTL                        ((0x4c0e  << 2) + 0xffd00000)
// ------------------------------------------------------------------------------------
//spicc 1
// -----------------------------------------------
// CBUS_BASE:  SPICC1_CBUS_BASE = 0x54
// -----------------------------------------------
#define SPICC1_RXDATA                              ((0x5400  << 2) + 0xffd00000)
#define SPICC1_TXDATA                              ((0x5401  << 2) + 0xffd00000)
#define SPICC1_CONREG                              ((0x5402  << 2) + 0xffd00000)
#define SPICC1_INTREG                              ((0x5403  << 2) + 0xffd00000)
#define SPICC1_DMAREG                              ((0x5404  << 2) + 0xffd00000)
#define SPICC1_STATREG                             ((0x5405  << 2) + 0xffd00000)
#define SPICC1_PERIODREG                           ((0x5406  << 2) + 0xffd00000)
#define SPICC1_TESTREG                             ((0x5407  << 2) + 0xffd00000)
#define SPICC1_DRADDR                              ((0x5408  << 2) + 0xffd00000)
#define SPICC1_DWADDR                              ((0x5409  << 2) + 0xffd00000)
#define SPICC1_LD_CNTL0                            ((0x540a  << 2) + 0xffd00000)
#define SPICC1_LD_CNTL1                            ((0x540b  << 2) + 0xffd00000)
#define SPICC1_LD_RADDR                            ((0x540c  << 2) + 0xffd00000)
#define SPICC1_LD_WADDR                            ((0x540d  << 2) + 0xffd00000)
#define SPICC1_ENHANCE_CNTL                        ((0x540e  << 2) + 0xffd00000)
//
//// -------------------------------------------------------------------
//// PSEL Group #1:  0x400 ~ 0x7FF
//// -------------------------------------------------------------------
//`define  PERIPHS1_CBUS_BASE   8'h28
//
//
//
//// ----------------------------
//// IR Remote (8)
//// ----------------------------
//`define IR_DEC_LDR_ACTIVE               8'h20
//`define IR_DEC_LDR_IDLE                 8'h21
//`define IR_DEC_LDR_REPEAT               8'h22
//`define IR_DEC_BIT_0                    8'h23
//`define IR_DEC_REG0                     8'h24
//`define IR_DEC_FRAME                    8'h25
//`define IR_DEC_STATUS                   8'h26
//`define IR_DEC_REG1                     8'h27
//
//// ----------------------------
//// Demod Sampling
//// ----------------------------
//`define DEMOD_ADC_SAMPLING               8'h2d
//// ----------------------------
//// WIFI
//// ----------------------------
//// `define WIFI_ADC_SAMPLING               8'h2e
//// `define WIFI_ADC_READBACK               8'h2f
//
//
//// ---------------------------
//// EFUSE (4)
//// ----------------------------
//// Moved to the Secure APB3 bus
//// `define EFUSE_CNTL0                     8'h58
//// `define EFUSE_CNTL1                     8'h59
//// `define EFUSE_CNTL2                     8'h5a
//// `define EFUSE_CNTL3                     8'h5b
//// `define EFUSE_CNTL4                     8'h5c
//
//// ---------------------------------------------
//// Separate APB slave that shares the CBUS/APB
//// register space of the static registers
//// ---------------------------------------------
//
//`define ATAPI_IDEREG0                   8'h60
//   `define IDE_UDMA_PIO_STATE         15
//   `define IDE_BUSY                   14
//   `define IDE_ERROR_BIT              13
//   `define IDE_DMARQ_BIT              12
//   `define IDE_IORDY_BIT              11
//   `define IDE_IORDY_EN_BIT           10
//   `define IDE_DIS_CSEL_BIT            9
//   `define IDE_CSEL_BIT                8
//   `define IDE_IRQ14                   2
//   `define IDE_ATAPI_GPIO_EN           3
//   `define IDE_DMARQ_FULL              1
//   `define IDE_ENABLE                  0
//`define ATAPI_IDEREG1                   8'h61
//`define ATAPI_IDEREG2                   8'h62
//    `define IDE_XFER_CNT_MSB_BIT      18
//    `define IDE_XFER_CNT_LSB_BIT       0
//`define ATAPI_CYCTIME                   8'h63
//`define ATAPI_IDETIME                   8'h64
//`define ATAPI_PIO_TIMING                8'h65
//`define ATAPI_TABLE_ADD_REG             8'h66
//`define ATAPI_IDEREG3                   8'h67
//`define ATAPI_UDMA_REG0                 8'h68
//`define ATAPI_UDMA_REG1                 8'h69
//
//// Room for registers here
//
//`define TRANS_PWMA_REG0                 8'h70
//`define TRANS_PWMA_REG1                 8'h71
//`define TRANS_PWMA_MUX0                 8'h72
//`define TRANS_PWMA_MUX1                 8'h73
//`define TRANS_PWMA_MUX2                 8'h74
//`define TRANS_PWMA_MUX3                 8'h75
//`define TRANS_PWMA_MUX4                 8'h76
//`define TRANS_PWMA_MUX5                 8'h77
//
//`define TRANS_PWMB_REG0                 8'h78
//`define TRANS_PWMB_REG1                 8'h79
//`define TRANS_PWMB_MUX0                 8'h7a
//`define TRANS_PWMB_MUX1                 8'h7b
//`define TRANS_PWMB_MUX2                 8'h7c
//`define TRANS_PWMB_MUX3                 8'h7d
//`define TRANS_PWMB_MUX4                 8'h7e
//`define TRANS_PWMB_MUX5                 8'h7f
//
//
//
//// ----------------------------
//// NAND (21)
//// ----------------------------
//`define NAND_START                      8'h80
//`define NAND_ADR_CMD                    8'h8a
//`define NAND_ADR_STS                    8'h8b
//`define NAND_END                        8'h8f
//
//// ----------------------------
//// ISP_FLASH_LED_CTRL
//// ----------------------------
////bit 31, reg_led_en //rising pulse start, falling pulse stop for torch mode
////bit 30, reg_inc_i_st_lat //for as3685, dynamic increase current during st_latch
////bit 29:28, reg_inv_en_pol //bit[29], invert en1, bit [28], invert en2
////bit 27, reg_switch_en1en2  //switch output en1 and en2. For IS3231: en1 is EN, en2 is mode.
////bit 26, reg_force_off_mode //1: reset state machine at the falling edge no matter which state it is in
////bit 25, reg_hold_nonstd_off_mode //hold the non-std led_off signal input before state "OFF"
////bit 24, reg_flash_mode_timeout_en  //force to exit the Tlat state when time out, for flash mode protection
////bit 23, reg_en1_st_ini_level //en1 level during state ST_INI
////bit 22, reg_en2_st_set_mp_level //en2 level during state ST_SET_MP_HI, ST_SET_MP_LO
////bit 21, reg_en1_st_off_level //en1 level during state ST_OFF
////bit 20, reg_en2_st_off_level //en2 level during state ST_OFF
////bit 19:12, reg_en1_mp_num  //en1 multi pulse number, up to 256 step current control
////bit 10:0, reg_t_st_ini //Max: 85.2 us under 24M clock input
//`define ISP_LED_CTRL                    8'h98
//
////bit 31:21, reg_t_en1_inc_i_st_lat_cnt //Max: 85.2us under 24M. for as3685, dynamic increase current during st_latch
////bit 20:10, reg_t_en2_lo_st_ini //Max: 85.2 us under 24M clock input
////bit 9:0, reg_t_en2_hi1_st_lat_cnt //42.62us @24M, EN2 can output hi-lo-hi during ST_LATCH, this is the first lo -duration
//`define ISP_LED_TIMING1                 8'h99
//
////bit 31:21, reg_t_en1_mp_hi_cnt //Max: 85.2 us under 24M clock input, mp means multi pulse
////bit 20:10, reg_t_en1_mp_lo_cnt //Max: 85.2 us under 24M clock input, mp means multi pulse
////bit 9:0, reg_t_en2_lo1_st_lat_cnt //42.62us @24M, EN2 can output hi-lo-hi during ST_LATCH, this is the first lo -duration
//`define ISP_LED_TIMING2                 8'h9a
//
////bit 30:28, RO state
////bit 25:0, reg_flash_mode_timeout_cnt //up to 2.79s at 24Mhz clk input
//`define ISP_LED_TIMING3                 8'h9b
//
////bit 25:0, reg_t_st_lat_cnt //up to 2.79s, keep the led on if it's 26'h3ffffff under torch mode
//`define ISP_LED_TIMING4                 8'h9c
//
////bit 31:26, reg_t_st_off_cnt[5:0] //up to 85.2us OFF state.
////bit 25:0, reg_t_en2_hi2_st_lat_cnt //EN2 can output hi-lo-hi during ST_LATCH, this is the second hi -duration
//`define ISP_LED_TIMING5                 8'h9d
//
////bit 30:26, reg_t_st_off_cnt[10:6] //up to 85.2us OFF state.
////bit 25:0, reg_t_en1_st_lat_hold_cnt //to make sure Tlat to meat it's minimum request 500us (since non-std led_off signal may comes in anytime)
//`define ISP_LED_TIMING6                 8'h9e
//// ----------------------------
//// SAR ADC (16)
//// ----------------------------
////`define SAR_ADC_REG0                    8'ha0
////`define SAR_ADC_CHAN_LIST               8'ha1
////`define SAR_ADC_AVG_CNTL                8'ha2
////`define SAR_ADC_REG3                    8'ha3
////`define SAR_ADC_DELAY                   8'ha4
////`define SAR_ADC_LAST_RD                 8'ha5
////`define SAR_ADC_FIFO_RD                 8'ha6
////`define SAR_ADC_AUX_SW                  8'ha7
////`define SAR_ADC_CHAN_10_SW              8'ha8
////`define SAR_ADC_DETECT_IDLE_SW          8'ha9
////`define SAR_ADC_DELTA_10                8'haa
////`define SAR_ADC_REG11                   8'hab
////`define SAR_ADC_REG12                   8'hac
////`define SAR_ADC_REG13                   8'had
//
//// ----------------------------
//// CTouch (16)
//// ----------------------------
//
//
//// ---------------------------
//// RTC (4)
//// ---------------------------
//`define RTC_ADDR0                      8'hd0
//`define RTC_ADDR1                      8'hd1
//`define RTC_ADDR2                      8'hd2
//`define RTC_ADDR3                      8'hd3
//`define RTC_ADDR4                      8'hd4
//// ----------------------------
//// clock measure (4)
//// ----------------------------
//
//
//
//// -------------------------------------------------------------------
//// PSEL Group #2:  0x800 ~ 0xbFF
//// -------------------------------------------------------------------
//`define  PERIPHS2_CBUS_BASE   8'h2c
//
//`define USB_ADDR0                      8'h00
//`define USB_ADDR1                      8'h01
//`define USB_ADDR2                      8'h02
//`define USB_ADDR3                      8'h03
//`define USB_ADDR4                      8'h04
//`define USB_ADDR5                      8'h05
//`define USB_ADDR6                      8'h06
//`define USB_ADDR7                      8'h07
//`define USB_ADDR8                      8'h08
//`define USB_ADDR9                      8'h09
//`define USB_ADDR10                     8'h0a
//`define USB_ADDR11                     8'h0b
//`define USB_ADDR12                     8'h0c
//`define USB_ADDR13                     8'h0d
//`define USB_ADDR14                     8'h0e
//`define USB_ADDR15                     8'h0f
//
//`define USB_ADDR16                     8'h10
//`define USB_ADDR17                     8'h11
//`define USB_ADDR18                     8'h12
//`define USB_ADDR19                     8'h13
//`define USB_ADDR20                     8'h14
//`define USB_ADDR21                     8'h15
//`define USB_ADDR22                     8'h16
//`define USB_ADDR23                     8'h17
//`define USB_ADDR24                     8'h18
//`define USB_ADDR25                     8'h19
//`define USB_ADDR26                     8'h1a
//`define USB_ADDR27                     8'h1b
//`define USB_ADDR28                     8'h1c
//`define USB_ADDR29                     8'h1d
//`define USB_ADDR30                     8'h1e
//`define USB_ADDR31                     8'h1f
//
//
//
//
//
//// -------------------------------------------------------------------
//// PSEL Group #3:  0xc00 ~ 0xFFF
//// -------------------------------------------------------------------
//`define  PERIPHS3_CBUS_BASE   8'h30
//
//// ---------------------------
//// SDIO (8)
//// ---------------------------
//// `define C_SDIO_HIGH16                   8'h00
//// bit 31:0 -- cmd_argument/MS_SHORT_DATA_WRITE
//`define CMD_ARGUMENT                    8'h08
//// bit 31:24 -- repeat_package_times/MS_SHORT_DATA_WRITE_NUMBER
//// bit 21   -- use_int_window
//// bit 20   -- cmd_send_data/MS_HAVE_LONG_DATA_WRITE
//// bit 19   -- check_busy_on_dat0 (used for R1b response)
//// bit 18   -- response_crc7_from_8
//// bit 17   -- response_have_data/MS_HAVE_LONG_DATA_READ
//// bit 16   -- response_do_not_have_crc7/MS_SHORT_DATA_DO_NOT_HAVE_CRC16
//// bit 15:8 -- cmd_response_bits (00 means no response) /MS_SHORT_DATA_READ_NUMBER
//// bit 7:0 -- cmd_command/MS_TPC
//`define CMD_SEND                        8'h09
//// bit 31:29 -- sdio_write_CRC_ok_status
//// bit 28:23 -- sdio_write_Nwr
//// bit 22:21 -- m_endian
//// bit 20    -- bus_width
//// bit 19    -- data_latch_at_negedge (normally at posedge)
//// bit 18    -- do_not_delay_data (normally delay one clock)
//// bit 17:12 -- cmd_argument_bits (before CRC, normally : 39)
//// bit 11 -- cmd_out_at_posedge (normally at negedge)
//// bit 10 -- cmd_disable_CRC
//// bit 9:0 -- cmd_clk_divide
//`define SDIO_CONFIG                     8'h0a
//// bit 31:19 -- sdio_timing_out_count
//// bit 18 -- arc_timing_out_int_en
//// bit 17 -- amrisc_timing_out_int_en
//// bit 16 -- sdio_timig_out_int   -- write 1 clear this int bit
//// bit 15:12 -- sdio_status_info  -- used for change infor between ARC and Amrisc
//// bit 11 -- sdio_set_soft_int -- write 1 to this bit will set sdio_soft_int , read out is m_req_sdio
//// bit 10 -- sdio_soft_int   -- write 1 clear this int bit
//// bit 9 -- sdio_cmd_int   -- write 1 clear this int bit
//// bit 8 -- sdio_if_int   -- write 1 clear this int bit
//// bit 7 -- sdio_data_write_crc16_ok -- Read-Only
//// bit 6 -- sdio_data_read_crc16_ok  -- Read-Only
//// bit 5 -- sdio_response_crc7_ok    -- Read-Only
//// bit 4 -- sdio_cmd_busy            -- Read-Only
//// bit 3:0 -- sdio_status            -- Read-Only
//`define SDIO_STATUS_IRQ                 8'h0b
//// bit 31 -- halt_hole 0 -- 8 bits 1 -- 16 bits
//// bit 30 -- force_halt
//// bit 29:24 -- sdio_force_data_read (read_only)
//// bit 23:22 -- disable_mem_halt (write and read)
//// bit 21:16 -- sdio_force_output_en
//// bit 15 -- soft_reset
//// bit 14 -- sdio_force_enable
//// bit 13:8 -- sdio_force_data/sdio_read_data
//// bit 7:6 -- sdio_if_int_config
//// bit 5 -- arc_soft_int_en
//// bit 4 -- arc_cmd_int_en
//// bit 3 -- arc_if_int_en
//// bit 2 -- amrisc_soft_int_en
//// bit 1 -- amrisc_cmd_int_en
//// bit 0 -- amrisc_if_int_en
//`define SDIO_IRQ_CONFIG                 8'h0c
//// bit 27:16 -- data_catch_finish_point
//// (
//// bit 15:12 -- response_read_index
//// bit 9 -- data_catch_readout_en
//// bit 8 -- write_read_out_index
//// ) this bits only write when write_read_out_index = 1
//// bit 11 -- sdio_1_data_swap01
//// bit 10 -- sdio_0_data_on_1
//// bit 7:6 -- data_catch_level
//// bit 5 -- stream_8_bits_mode
//// bit 4 -- stream_enable
//// bit 3 -- ms_sclk_always
//// bit 2 -- ms_enable
//// bit 1:0 -- SDIO_port_sel //00-sdio1, 01-sdio2, 02-sdio3
//`define SDIO_MULT_CONFIG                8'h0d
//// bit 31:0 -- m_addr_sdio
//`define SDIO_M_ADDR                     8'h0e
//// bit 31    -- CRC_status_4line
//// bit 30    -- data_rw_do_not_have_crc16/MS_LONG_DATA_DO_NOT_HAVE_CRC16
//// bit 29:16 -- data_rw_number/MS_LONG_DATA_NUMBER
//// bit 15:0 -- cmd_argument_ext/MS_SHORT_DATA_EXTENSION
//`define SDIO_EXTENSION                  8'h0f
//// ----------------------------
//// SDIO_AHB_CBUS (2)
//// ----------------------------
//// bit   17    -- arc_ahb_cbus_int_en
//// bit   16    -- amrisc_ahb_cbus_int_en
//// bit 15:8    -- SDIO_FIFO_count
//// bit  7:4    -- m_req_count
//// bit    3    -- reserved
//// bit    2    -- m_write_cbus
//// bit    1    -- m_req_cbus
//// bit    0    -- sdio_ahb_cbus_enable
//`define SDIO_AHB_CBUS_CTRL             8'h18
//// m_rd_data[31:0] when (m_write_cbus == 0)  CBUS write
//// m_wr_data[31:0] when (m_write_cbus == 1)  CBUS read
//`define SDIO_AHB_CBUS_M_DATA           8'h19
//
//
//// ----------------------------
//// SDHC (SDIO #2)
//// ----------------------------
//`define SD_REG0_ARGU    8'h80
//`define SD_REG1_SEND    8'h81
//`define SD_REG2_CNTL    8'h82
//`define SD_REG3_STAT    8'h83
//`define SD_REG4_CLKC    8'h84
//`define SD_REG5_ADDR    8'h85
//`define SD_REG6_PDMA    8'h86
//`define SD_REG7_MISC    8'h87
//`define SD_REG8_DATA    8'h88
//`define SD_REG9_ICTL    8'h89
//`define SD_REGA_ISTA    8'h8a
//`define SD_REGB_SRST    8'h8b
//`define SD_REGC_ESTA    8'h8c
//`define SD_REGD_ENHC    8'h8d
//`define SD_REGE_CLK2    8'h8e
//
//
// Closing file:  periphs_reg.h
//
//
// Reading file:  isa_reg.h
//
// $isa/rtl/isa_core register defines for the APB bus
// CBUS base slave address
// -----------------------------------------------
// CBUS_BASE:  ISA_CBUS_BASE = 0x3c
// -----------------------------------------------
// Up to 256 registers for this base
#define ISA_DEBUG_REG0                             ((0x3c00  << 2) + 0xffd00000)
#define ISA_DEBUG_REG1                             ((0x3c01  << 2) + 0xffd00000)
#define ISA_DEBUG_REG2                             ((0x3c02  << 2) + 0xffd00000)
#define ISA_DEBUG_REG3                             ((0x3c03  << 2) + 0xffd00000)
#define ISA_PLL_CLK_SIM0                           ((0x3c08  << 2) + 0xffd00000)
#define ISA_CNTL_REG0                              ((0x3c09  << 2) + 0xffd00000)
// -----------------------------------------------------------
#define AO_CPU_IRQ_IN0_INTR_STAT                   ((0x3c10  << 2) + 0xffd00000)
#define AO_CPU_IRQ_IN0_INTR_STAT_CLR               ((0x3c11  << 2) + 0xffd00000)
#define AO_CPU_IRQ_IN0_INTR_MASK                   ((0x3c12  << 2) + 0xffd00000)
#define AO_CPU_IRQ_IN0_INTR_FIRQ_SEL               ((0x3c13  << 2) + 0xffd00000)
// define MEDIA_CPU_IRQ_IN1_INTR_STAT           8'h14
// define MEDIA_CPU_IRQ_IN1_INTR_STAT_CLR       8'h15
// define MEDIA_CPU_IRQ_IN1_INTR_MASK           8'h16
// define MEDIA_CPU_IRQ_IN1_INTR_FIRQ_SEL       8'h17
//
// define MEDIA_CPU_IRQ_IN2_INTR_STAT              8'h18
// define MEDIA_CPU_IRQ_IN2_INTR_STAT_CLR          8'h19
// define MEDIA_CPU_IRQ_IN2_INTR_MASK              8'h1a
// define MEDIA_CPU_IRQ_IN2_INTR_FIRQ_SEL          8'h1b
//
// define MEDIA_CPU_IRQ_IN3_INTR_STAT            8'h1c
// define MEDIA_CPU_IRQ_IN3_INTR_STAT_CLR        8'h1d
// define MEDIA_CPU_IRQ_IN3_INTR_MASK            8'h1e
// define MEDIA_CPU_IRQ_IN3_INTR_FIRQ_SEL        8'h1f
#define GPIO_INTR_EDGE_POL                         ((0x3c20  << 2) + 0xffd00000)
#define GPIO_INTR_GPIO_SEL0                        ((0x3c21  << 2) + 0xffd00000)
#define GPIO_INTR_GPIO_SEL1                        ((0x3c22  << 2) + 0xffd00000)
#define GPIO_INTR_FILTER_SEL0                      ((0x3c23  << 2) + 0xffd00000)
// `define GLOBAL_INTR_DISABLE                 8'h24    never used
#define CVBS_IRQ0_CNTL                             ((0x3c24  << 2) + 0xffd00000)
#define CVBS_IRQ1_CNTL                             ((0x3c25  << 2) + 0xffd00000)
#define CVBS_IRQ0_COUNTER                          ((0x3c26  << 2) + 0xffd00000)
#define CVBS_IRQ1_COUNTER                          ((0x3c27  << 2) + 0xffd00000)
#define MEDIA_CPU_INTR_STAT                        ((0x3c28  << 2) + 0xffd00000)
#define MEDIA_CPU_INTR_STAT_CLR                    ((0x3c29  << 2) + 0xffd00000)
#define MEDIA_CPU_INTR_MASK                        ((0x3c2a  << 2) + 0xffd00000)
#define MEDIA_CPU_INTR_FIRQ_SEL                    ((0x3c2b  << 2) + 0xffd00000)
// -----------------------------------------------------------
#define ISA_BIST_REG0                              ((0x3c30  << 2) + 0xffd00000)
#define ISA_BIST_REG1                              ((0x3c31  << 2) + 0xffd00000)
// -----------------------------------------------------------
#define WATCHDOG_CNTL                              ((0x3c34  << 2) + 0xffd00000)
#define WATCHDOG_CNTL1                             ((0x3c35  << 2) + 0xffd00000)
#define WATCHDOG_TCNT                              ((0x3c36  << 2) + 0xffd00000)
#define WATCHDOG_RESET                             ((0x3c37  << 2) + 0xffd00000)
// -----------------------------------------------------------
#define AHB_ARBITER_REG                            ((0x3c42  << 2) + 0xffd00000)
#define AHB_ARBDEC_REG                             ((0x3c43  << 2) + 0xffd00000)
#define AHB_ARBITER2_REG                           ((0x3c4a  << 2) + 0xffd00000)
#define DEVICE_MMCP_CNTL                           ((0x3c4b  << 2) + 0xffd00000)
#define AUDIO_MMCP_CNTL                            ((0x3c4c  << 2) + 0xffd00000)
// -----------------------------------------------------------
#define ISA_TIMER_MUX                              ((0x3c50  << 2) + 0xffd00000)
#define ISA_TIMERA                                 ((0x3c51  << 2) + 0xffd00000)
#define ISA_TIMERB                                 ((0x3c52  << 2) + 0xffd00000)
#define ISA_TIMERC                                 ((0x3c53  << 2) + 0xffd00000)
#define ISA_TIMERD                                 ((0x3c54  << 2) + 0xffd00000)
#define FBUF_ADDR                                  ((0x3c56  << 2) + 0xffd00000)
    #define VIDEO_FRM_BUF_MSB_BIT      23
    #define VIDEO_FRM_BUF_LSB_BIT       2
#define SDRAM_CTL0                                 ((0x3c57  << 2) + 0xffd00000)
#define SDRAM_CTL2                                 ((0x3c58  << 2) + 0xffd00000)
//`define AO_CPU_CTL                          8'h59
#define SDRAM_CTL4                                 ((0x3c5a  << 2) + 0xffd00000)
#define SDRAM_CTL5                                 ((0x3c5b  << 2) + 0xffd00000)
#define SDRAM_CTL6                                 ((0x3c5c  << 2) + 0xffd00000)
#define SDRAM_CTL7                                 ((0x3c5d  << 2) + 0xffd00000)
#define SDRAM_CTL8                                 ((0x3c5e  << 2) + 0xffd00000)
#define AHB_MP4_MC_CTL                             ((0x3c5f  << 2) + 0xffd00000)
#define MEDIA_CPU_PCR                              ((0x3c60  << 2) + 0xffd00000)
#define MEDIA_CPU_CTL                              ((0x3c61  << 2) + 0xffd00000)
#define ISA_TIMERE                                 ((0x3c62  << 2) + 0xffd00000)
#define ISA_TIMERE_HI                              ((0x3c63  << 2) + 0xffd00000)
#define ISA_TIMER_MUX1                             ((0x3c64  << 2) + 0xffd00000)
#define ISA_TIMERF                                 ((0x3c65  << 2) + 0xffd00000)
#define ISA_TIMERG                                 ((0x3c66  << 2) + 0xffd00000)
#define ISA_TIMERH                                 ((0x3c67  << 2) + 0xffd00000)
#define ISA_TIMERI                                 ((0x3c68  << 2) + 0xffd00000)
// ---------------------------------------------
#define ABUF_WR_CTL0                               ((0x3c70  << 2) + 0xffd00000)
    #define ABUF_WR_INT_EN	    31
    #define ABUF_WR_INT_POS_MSB      30
    #define ABUF_WR_INT_POS_LSB      16
    #define ABUF_WR_BLK_SIZE_MSB     14
    #define ABUF_WR_BLK_SIZE_LSB      0
#define ABUF_WR_CTL1                               ((0x3c71  << 2) + 0xffd00000)
    #define ABUF_WR_INT_EN	    31
    #define ABUF_WR_INT_POS_MSB      30
    #define ABUF_WR_INT_POS_LSB      16
    #define ABUF_WR_BLK_SIZE_MSB     14
    #define ABUF_WR_BLK_SIZE_LSB      0
#define ABUF_WR_CTL2                               ((0x3c72  << 2) + 0xffd00000)
    #define ABUF_WR_CUR_FF_CNT_MSB   21
    #define ABUF_WR_CUR_FF_CNT_LSB   16
    #define ABUF_WR_CUR_BLK_MSB      14
    #define ABUF_WR_CUR_BLK_LSB       0
#define ABUF_WR_CTL3                               ((0x3c73  << 2) + 0xffd00000)
    #define ABUF_WR_AHB_RST_PLS       3
    #define ABUF_WR_FF_CLR_PLS        2
    #define ABUF_WR_PLY_RPT_LVL	     1
    #define ABUF_WR_FF_PAUSE_LVL      0
#define ABUF_RD_CTL0                               ((0x3c74  << 2) + 0xffd00000)
#define ABUF_RD_CTL1                               ((0x3c75  << 2) + 0xffd00000)
    #define ABUF_RD_INT_EN	    31
    #define ABUF_RD_INT_POS_MSB      30
    #define ABUF_RD_INT_POS_LSB      16
    #define ABUF_RD_BLK_SIZE_MSB     14
    #define ABUF_RD_BLK_SIZE_LSB      0
#define ABUF_RD_CTL2                               ((0x3c76  << 2) + 0xffd00000)
    #define ABUF_RD_CUR_FF_CNT_MSB   21
    #define ABUF_RD_CUR_FF_CNT_LSB   16
    #define ABUF_RD_CUR_BLK_MSB      14
    #define ABUF_RD_CUR_BLK_LSB       0
#define ABUF_RD_CTL3                               ((0x3c77  << 2) + 0xffd00000)
    #define ABUF_RD_PLY_ONCE_PLS      4
    #define ABUF_RD_AHB_RST_PLS       3
    #define ABUF_RD_FF_CLR_PLS        2
    #define ABUF_RD_PLY_RPT_LVL	     1
    #define ABUF_RD_FF_PAUSE_LVL      0
#define ABUF_ARB_CTL0                              ((0x3c78  << 2) + 0xffd00000)
#define ABUF_FIFO_CTL0                             ((0x3c79  << 2) + 0xffd00000)
    #define AIUout_FIFO_THRESHOLD_MSB 11
    #define AIUout_FIFO_THRESHOLD_LSB 6
    #define AIUin_FIFO_THRESHOLD_MSB  5
    #define AIUin_FIFO_THRESHOLD_LSB  0
// ---------------------------------------------
#define AHB_BRIDGE_CNTL_WR                         ((0x3c80  << 2) + 0xffd00000)
#define AHB_BRIDGE_REMAP0                          ((0x3c81  << 2) + 0xffd00000)
#define AHB_BRIDGE_REMAP1                          ((0x3c82  << 2) + 0xffd00000)
#define AHB_BRIDGE_REMAP2                          ((0x3c83  << 2) + 0xffd00000)
#define AHB_BRIDGE_REMAP3                          ((0x3c84  << 2) + 0xffd00000)
#define AHB_BRIDGE_CNTL_REG1                       ((0x3c85  << 2) + 0xffd00000)
#define AHB_BRIDGE_CNTL_REG2                       ((0x3c86  << 2) + 0xffd00000)
// ---------------------------------------------
// ----------------------------------------------
// `define SYS_CPU_0_IRQ_IN0_INTR_STAT         8'h90
// `define SYS_CPU_0_IRQ_IN0_INTR_STAT_CLR     8'h91
// `define SYS_CPU_0_IRQ_IN0_INTR_MASK         8'h92
// `define SYS_CPU_0_IRQ_IN0_INTR_FIRQ_SEL     8'h93
// `define SYS_CPU_0_IRQ_IN1_INTR_STAT         8'h94
// `define SYS_CPU_0_IRQ_IN1_INTR_STAT_CLR     8'h95
// `define SYS_CPU_0_IRQ_IN1_INTR_MASK         8'h96
// `define SYS_CPU_0_IRQ_IN1_INTR_FIRQ_SEL     8'h97
// `define SYS_CPU_0_IRQ_IN2_INTR_STAT         8'h98
// `define SYS_CPU_0_IRQ_IN2_INTR_STAT_CLR     8'h99
// `define SYS_CPU_0_IRQ_IN2_INTR_MASK         8'h9a
// `define SYS_CPU_0_IRQ_IN2_INTR_FIRQ_SEL     8'h9b
// `define SYS_CPU_0_IRQ_IN3_INTR_STAT         8'h9c
// `define SYS_CPU_0_IRQ_IN3_INTR_STAT_CLR     8'h9d
// `define SYS_CPU_0_IRQ_IN3_INTR_MASK         8'h9e
// `define SYS_CPU_0_IRQ_IN3_INTR_FIRQ_SEL     8'h9f
// ----------------------------------------------
// `define SYS_CPU_1_IRQ_IN0_INTR_STAT         8'ha0
// `define SYS_CPU_1_IRQ_IN0_INTR_STAT_CLR     8'ha1
// `define SYS_CPU_1_IRQ_IN0_INTR_MASK         8'ha2
// `define SYS_CPU_1_IRQ_IN0_INTR_FIRQ_SEL     8'ha3
//
// `define SYS_CPU_1_IRQ_IN1_INTR_STAT         8'ha4
// `define SYS_CPU_1_IRQ_IN1_INTR_STAT_CLR     8'ha5
// `define SYS_CPU_1_IRQ_IN1_INTR_MASK         8'ha6
// `define SYS_CPU_1_IRQ_IN1_INTR_FIRQ_SEL     8'ha7
//
// `define SYS_CPU_1_IRQ_IN2_INTR_STAT         8'ha8
// `define SYS_CPU_1_IRQ_IN2_INTR_STAT_CLR     8'ha9
// `define SYS_CPU_1_IRQ_IN2_INTR_MASK         8'haa
// `define SYS_CPU_1_IRQ_IN2_INTR_FIRQ_SEL     8'hab
//
// `define SYS_CPU_1_IRQ_IN3_INTR_STAT         8'hac
// `define SYS_CPU_1_IRQ_IN3_INTR_STAT_CLR     8'had
// `define SYS_CPU_1_IRQ_IN3_INTR_MASK         8'hae
// `define SYS_CPU_1_IRQ_IN3_INTR_FIRQ_SEL     8'haf
// ----------------------------------------------
// `define MEDIA_CPU_IRQ_IN4_INTR_STAT         8'hb0
// `define MEDIA_CPU_IRQ_IN4_INTR_STAT_CLR     8'hb1
// `define MEDIA_CPU_IRQ_IN4_INTR_MASK         8'hb2
// `define MEDIA_CPU_IRQ_IN4_INTR_FIRQ_SEL     8'hb3
// `define SYS_CPU_0_IRQ_IN4_INTR_STAT         8'hb4
// `define SYS_CPU_0_IRQ_IN4_INTR_STAT_CLR     8'hb5
// `define SYS_CPU_0_IRQ_IN4_INTR_MASK         8'hb6
// `define SYS_CPU_0_IRQ_IN4_INTR_FIRQ_SEL     8'hb7
// `define SYS_CPU_1_IRQ_IN4_INTR_STAT         8'hb8
// `define SYS_CPU_1_IRQ_IN4_INTR_STAT_CLR     8'hb9
// `define SYS_CPU_1_IRQ_IN4_INTR_MASK         8'hba
// `define SYS_CPU_1_IRQ_IN4_INTR_FIRQ_SEL     8'hbb
// `define SYS_CPU_2_IRQ_IN4_INTR_STAT         8'hbc
// `define SYS_CPU_2_IRQ_IN4_INTR_STAT_CLR     8'hbd
// `define SYS_CPU_2_IRQ_IN4_INTR_MASK         8'hbe
// `define SYS_CPU_2_IRQ_IN4_INTR_FIRQ_SEL     8'hbf
// ----------------------------------------------
// `define SYS_CPU_2_IRQ_IN0_INTR_STAT         8'hc0
// `define SYS_CPU_2_IRQ_IN0_INTR_STAT_CLR     8'hc1
// `define SYS_CPU_2_IRQ_IN0_INTR_MASK         8'hc2
// `define SYS_CPU_2_IRQ_IN0_INTR_FIRQ_SEL     8'hc3
// `define SYS_CPU_2_IRQ_IN1_INTR_STAT         8'hc4
// `define SYS_CPU_2_IRQ_IN1_INTR_STAT_CLR     8'hc5
// `define SYS_CPU_2_IRQ_IN1_INTR_MASK         8'hc6
// `define SYS_CPU_2_IRQ_IN1_INTR_FIRQ_SEL     8'hc7
// `define SYS_CPU_2_IRQ_IN2_INTR_STAT         8'hc8
// `define SYS_CPU_2_IRQ_IN2_INTR_STAT_CLR     8'hc9
// `define SYS_CPU_2_IRQ_IN2_INTR_MASK         8'hca
// `define SYS_CPU_2_IRQ_IN2_INTR_FIRQ_SEL     8'hcb
// `define SYS_CPU_2_IRQ_IN3_INTR_STAT         8'hcc
// `define SYS_CPU_2_IRQ_IN3_INTR_STAT_CLR     8'hcd
// `define SYS_CPU_2_IRQ_IN3_INTR_MASK         8'hce
// `define SYS_CPU_2_IRQ_IN3_INTR_FIRQ_SEL     8'hcf
// ----------------------------------------------
// `define SYS_CPU_3_IRQ_IN0_INTR_STAT         8'hd0
// `define SYS_CPU_3_IRQ_IN0_INTR_STAT_CLR     8'hd1
// `define SYS_CPU_3_IRQ_IN0_INTR_MASK         8'hd2
// `define SYS_CPU_3_IRQ_IN0_INTR_FIRQ_SEL     8'hd3
// `define SYS_CPU_3_IRQ_IN1_INTR_STAT         8'hd4
// `define SYS_CPU_3_IRQ_IN1_INTR_STAT_CLR     8'hd5
// `define SYS_CPU_3_IRQ_IN1_INTR_MASK         8'hd6
// `define SYS_CPU_3_IRQ_IN1_INTR_FIRQ_SEL     8'hd7
// `define SYS_CPU_3_IRQ_IN2_INTR_STAT         8'hd8
// `define SYS_CPU_3_IRQ_IN2_INTR_STAT_CLR     8'hd9
// `define SYS_CPU_3_IRQ_IN2_INTR_MASK         8'hda
// `define SYS_CPU_3_IRQ_IN2_INTR_FIRQ_SEL     8'hdb
// `define SYS_CPU_3_IRQ_IN3_INTR_STAT         8'hdc
// `define SYS_CPU_3_IRQ_IN3_INTR_STAT_CLR     8'hdd
// `define SYS_CPU_3_IRQ_IN3_INTR_MASK         8'hde
// `define SYS_CPU_3_IRQ_IN3_INTR_FIRQ_SEL     8'hdf
// ----------------------------------------------
// `define SYS_CPU_3_IRQ_IN4_INTR_STAT         8'he0
// `define SYS_CPU_3_IRQ_IN4_INTR_STAT_CLR     8'he1
// `define SYS_CPU_3_IRQ_IN4_INTR_MASK         8'he2
// `define SYS_CPU_3_IRQ_IN4_INTR_FIRQ_SEL     8'he3
// `define MEDIA_CPU_IRQ_IN5_INTR_STAT         8'he4
// `define MEDIA_CPU_IRQ_IN5_INTR_STAT_CLR     8'he5
// `define MEDIA_CPU_IRQ_IN5_INTR_MASK         8'he6
// `define MEDIA_CPU_IRQ_IN5_INTR_FIRQ_SEL     8'he7
// `define SYS_CPU_0_IRQ_IN5_INTR_STAT         8'he8
// `define SYS_CPU_0_IRQ_IN5_INTR_STAT_CLR     8'he9
// `define SYS_CPU_0_IRQ_IN5_INTR_MASK         8'hea
// `define SYS_CPU_0_IRQ_IN5_INTR_FIRQ_SEL     8'heb
//
// Closing file:  isa_reg.h
//
//`include "bt656_reg.h"
//`include "pdm_reg.h"
//========================================================================
//  Global Control Registers			    (12'h000 - 12'h0ff)
//
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  RESET_CBUS_BASE = 0x04
// -----------------------------------------------
#define VERSION_CTRL                               ((0x0400  << 2) + 0xffd00000)
#define RESET0_REGISTER                            ((0x0401  << 2) + 0xffd00000)
#define RESET1_REGISTER                            ((0x0402  << 2) + 0xffd00000)
#define RESET2_REGISTER                            ((0x0403  << 2) + 0xffd00000)
#define RESET3_REGISTER                            ((0x0404  << 2) + 0xffd00000)
#define RESET4_REGISTER                            ((0x0405  << 2) + 0xffd00000)
#define RESET5_REGISTER                            ((0x0406  << 2) + 0xffd00000)
#define RESET6_REGISTER                            ((0x0407  << 2) + 0xffd00000)
#define RESET7_REGISTER                            ((0x0408  << 2) + 0xffd00000)
#define RESET0_MASK                                ((0x0410  << 2) + 0xffd00000)
#define RESET1_MASK                                ((0x0411  << 2) + 0xffd00000)
#define RESET2_MASK                                ((0x0412  << 2) + 0xffd00000)
#define RESET3_MASK                                ((0x0413  << 2) + 0xffd00000)
#define RESET4_MASK                                ((0x0414  << 2) + 0xffd00000)
#define RESET5_MASK                                ((0x0415  << 2) + 0xffd00000)
#define RESET6_MASK                                ((0x0416  << 2) + 0xffd00000)
#define CRT_MASK                                   ((0x0417  << 2) + 0xffd00000)
#define RESET7_MASK                                ((0x0418  << 2) + 0xffd00000)
#define RESET0_LEVEL                               ((0x0420  << 2) + 0xffd00000)
#define RESET1_LEVEL                               ((0x0421  << 2) + 0xffd00000)
#define RESET2_LEVEL                               ((0x0422  << 2) + 0xffd00000)
#define RESET3_LEVEL                               ((0x0423  << 2) + 0xffd00000)
#define RESET4_LEVEL                               ((0x0424  << 2) + 0xffd00000)
#define RESET5_LEVEL                               ((0x0425  << 2) + 0xffd00000)
#define RESET6_LEVEL                               ((0x0426  << 2) + 0xffd00000)
#define RESET7_LEVEL                               ((0x0427  << 2) + 0xffd00000)
//======================================
//  Reset Register Bits
//
//======================================
    #define HIU_RESET	    0x0001
    #define VLD_RESET	    0x0002
    #define IQIDCT_RESET	0x0004
    #define MC_RESET	    0x0008
    #define DCU_RESET	    0x0010
    #define VIU_RESET	    0x0020
    #define AIU_RESET	    0x0040
    #define CPU_RESET	    0x0080
    #define AC3_RESET	    0x0100
    #define MPEG_RESET	    0x0200
//-----------------------------------------------------------
// PARSER
//-----------------------------------------------------------
// -----------------------------------------------
// CBUS_BASE:  PARSER_CBUS_BASE = 0x38
// -----------------------------------------------
// bit 31:8 -- es_pack_size
// bit 7:6 -- es_type     00-Video, 01-Audio, 10-Subtitle
// bit 5 -- es_write
// bit 4 -- es_passthrough
// bit 3 -- insert_before_es_write
// bit 2 -- discard_cmd
// bit 1 -- search_cmd
// bit 0 -- Parser Busy
#define PARSER_CONTROL                             ((0x3860  << 2) + 0xffd00000)
// Write
//   bit 31:0 begin address for parser fetch
// Read
//   32 bit current fetch address
#define PARSER_FETCH_ADDR                          ((0x3861  << 2) + 0xffd00000)
// Write
//   bit 31 circle buffer indicator
//   bit 30 check_buffer_stop_addr
//   bit 29:27 fetch endian
//   bit 26:0 buffer size ( Bytes )
// Special command:
//   when bit 26:0 == 27'h0
//     then bit 29    -- stream_passthrough_enable
//          bit 28:27 -- stream_passthrough_type
// Read
//   6:5 cmd_rd_ptr
//   4:3 cmd_wr_ptr
//   2:0 cmd_number
#define PARSER_FETCH_CMD                           ((0x3862  << 2) + 0xffd00000)
// 31:0 stop_fetch_addr
#define PARSER_FETCH_STOP_ADDR                     ((0x3863  << 2) + 0xffd00000)
// 31:0 stop_fetch_addr - current_write_addr  // read only
#define PARSER_FETCH_LEVEL                         ((0x3864  << 2) + 0xffd00000)
// bit 31 - fetch_dma_urgent
// bit 30 - stream_dma_urgent
// bit 29 - force_pfifo_ren
// bit 28 - pfifo_peak_enable
// bit 27 - enable_free_clk_parser_reg
// bit 26 -
// bit 25:24 - parser_src_sel (00 - fetch, 01 - aux1, 10 - aux2 11 - aux3)
// bit 23:16 - pfifo_empty_count
// bit 15:12 - max_es_write_cycle (x16x64bits)
// 11:10 - start code width ( 00-8bits, 01-16bits, 10-24bits, 11-32bits )
// 9:8 - pfifo data access width ( 00-8bits, 01-16bits, 10-24bits, 11-32bits )
// 7:0 - empty room for fetch data ( max_fetch_cycle ) x64 bits
#define PARSER_CONFIG                              ((0x3865  << 2) + 0xffd00000)
// bit 24:16 -- pfifo_level
// bit 9:0 -- point to byte address
#define PFIFO_WR_PTR                               ((0x3866  << 2) + 0xffd00000)
// bit 9:0 -- point to byte address
#define PFIFO_RD_PTR                               ((0x3867  << 2) + 0xffd00000)
// bit 31:0 -- 8/16/24/32 bits data acording to pfifo_data_width
#define PFIFO_DATA                                 ((0x3868  << 2) + 0xffd00000)
// bit 31:0 -- parser search pattern
#define PARSER_SEARCH_PATTERN                      ((0x3869  << 2) + 0xffd00000)
// bit 31:0 -- parser search mask ( 0 - disable bit match test )
#define PARSER_SEARCH_MASK                         ((0x386a  << 2) + 0xffd00000)
// bit 31:16 -- parser_int_disable_count
// bit 15:8 -- Parser interrupt enable for host cpu
// bit 7:0 -- Parser interrupt enable for Amrisc
#define PARSER_INT_ENABLE                          ((0x386b  << 2) + 0xffd00000)
// Bit 7 -- fetch_cmd_finished
// Bit 6:5 -- reserved
// Bit 4 -- parse finished
// Bit 3 -- discard finished
// Bit 2 -- insert zero finished
// Bit 1 -- Action Finished Except Search Start Code
// Bit 0 -- Search match interrupt (StartCode found)
// Read 7:0 int status
// Write will clear (bit based)
#define PARSER_INT_STATUS                          ((0x386c  << 2) + 0xffd00000)
// 15    - SCR_32_READ_OUT (Read Only)
// 14    - SCR_32_data_valid
// 13    - SCR_32_data
// 12    - SCR_count_en
// 11:0  - SCR90K_DIV
#define PARSER_SCR_CTL                             ((0x386d  << 2) + 0xffd00000)
// bit 31:0 SCR value
#define PARSER_SCR                                 ((0x386e  << 2) + 0xffd00000)
// bit 31:24 -- insert_loop_number
// bit 23:21 --
// bit 20:16 -- insert_byte_number
// bit 15:0 -- discard number
#define PARSER_PARAMETER                           ((0x386f  << 2) + 0xffd00000)
// bit 31:0 -- insert data // write only
// write to PARSER_CONTROL will reset the write position
// continous write to this address can write upto 16 bytes
#define PARSER_INSERT_DATA                         ((0x3870  << 2) + 0xffd00000)
// Bit 31:24 -- Reserved Stream_ID
// Bit 23:16 -- Sub Stream_ID
// Bit 15:8  -- Audio Stream_ID
// Bit 7:0   -- Video Stream_ID
#define VAS_STREAM_ID                              ((0x3871  << 2) + 0xffd00000)
// Bit 31:0 -- VIDEO_DTS
#define VIDEO_DTS                                  ((0x3872  << 2) + 0xffd00000)
// Bit 31:0 -- VIDEO_PTS
#define VIDEO_PTS                                  ((0x3873  << 2) + 0xffd00000)
// Bit 31:0 -- VIDEO_PTS_DTS_WR_PTR
#define VIDEO_PTS_DTS_WR_PTR                       ((0x3874  << 2) + 0xffd00000)
// Bit 31:0 -- AUDIO_PTS
#define AUDIO_PTS                                  ((0x3875  << 2) + 0xffd00000)
// Bit 31:0 -- AUDIO_PTS_WR_PTR
#define AUDIO_PTS_WR_PTR                           ((0x3876  << 2) + 0xffd00000)
// bit 31:20 -- stream_es_count ( Read Only)
// bit 19 -- req_pending ( parser ddr_A_fifo ) (Read Only)
// bit 18 -- stream_es_passthrough_enable
// bit 17:16 -- stream_es_passthrough_type
// bit 15:13 -- VIDEO2 Ees_write Endian
// bit 12 -- VIDEO2 using manual read point
// bit 11:9 -- SUB Ees_write Endian
// bit 8 -- SUB using manual read point
// bit 7:5 -- AUDIO Ees_write Endian
// bit 4 -- AUDIO using manual read point
// bit 3:1 -- VIDEO Ees_write Endian
// bit 0 -- VIDEO using manual read point
#define PARSER_ES_CONTROL                          ((0x3877  << 2) + 0xffd00000)
// Bit 31:0 PFIFO_MONITOR
#define PFIFO_MONITOR                              ((0x3878  << 2) + 0xffd00000)
// --------------------------------------------
// PARSER_VIDEO DDR Interface
// --------------------------------------------
// The PARSER_VIDEO start pointer into DDR memory is a 32-bit number
// The Start pointer will automatically be truncated to land on
// an 8-byte boundary.  That is, bits [2:0] = 0;
#define PARSER_VIDEO_START_PTR                     ((0x3880  << 2) + 0xffd00000)
#define PARSER_VIDEO_END_PTR                       ((0x3881  << 2) + 0xffd00000)
// --------------------------------------------
// PARSER_VIDEO Buffer Level Manager
// --------------------------------------------
#define PARSER_VIDEO_WP                            ((0x3882  << 2) + 0xffd00000)
#define PARSER_VIDEO_RP                            ((0x3883  << 2) + 0xffd00000)
#define PARSER_VIDEO_HOLE                          ((0x3884  << 2) + 0xffd00000)
// --------------------------------------------
// PARSER_AUDIO DDR Interface
// --------------------------------------------
// The PARSER_AUDIO start pointer into DDR memory is a 32-bit number
// The Start pointer will automatically be truncated to land on
// an 8-byte boundary.  That is, bits [2:0] = 0;
#define PARSER_AUDIO_START_PTR                     ((0x3885  << 2) + 0xffd00000)
#define PARSER_AUDIO_END_PTR                       ((0x3886  << 2) + 0xffd00000)
// --------------------------------------------
// PARSER_AUDIO Buffer Level Manager
// --------------------------------------------
#define PARSER_AUDIO_WP                            ((0x3887  << 2) + 0xffd00000)
#define PARSER_AUDIO_RP                            ((0x3888  << 2) + 0xffd00000)
#define PARSER_AUDIO_HOLE                          ((0x3889  << 2) + 0xffd00000)
// --------------------------------------------
// PARSER_SUB DDR Interface
// --------------------------------------------
// The PARSER_SUB start pointer into DDR memory is a 32-bit number
// The Start pointer will automatically be truncated to land on
// an 8-byte boundary.  That is, bits [2:0] = 0;
#define PARSER_SUB_START_PTR                       ((0x388a  << 2) + 0xffd00000)
#define PARSER_SUB_END_PTR                         ((0x388b  << 2) + 0xffd00000)
// --------------------------------------------
// PARSER_SUB Buffer Level Manager
// --------------------------------------------
#define PARSER_SUB_WP                              ((0x388c  << 2) + 0xffd00000)
#define PARSER_SUB_RP                              ((0x388d  << 2) + 0xffd00000)
#define PARSER_SUB_HOLE                            ((0x388e  << 2) + 0xffd00000)
// Bit[31] dma_busy
// Bit[30] cur_fetch_or_es_write
// Bit[29:28] reserved
// Bit[27:24] fetch_status
// Bit[23:0] buffer_cycles_left
#define PARSER_FETCH_INFO                          ((0x388f  << 2) + 0xffd00000)
// Bit[31:28] ctl_status
// Bit[27:24] insert_byte_offset
// Bit[23:0] es_pack_left_cycle
#define PARSER_STATUS                              ((0x3890  << 2) + 0xffd00000)
// Bit [31:16] AUDIO_wrap_count
// Bit  [15:0] VIDEO_wrap_count
#define PARSER_AV_WRAP_COUNT                       ((0x3891  << 2) + 0xffd00000)
// bit[29:24] A_brst_num_parser
// bit[21:16] A_id_parser
// bit[11:0] wrrsp_count_parser
#define WRRSP_PARSER                               ((0x3892  << 2) + 0xffd00000)
// `define CSS_cmd             12'h200   // address of css command and indirect register
// `define CSS_cntl            12'h201   // css control register
// `define CSS_data            12'h202   // indirect register
// `define CSS_id1_data  	    12'h203   // ID data for the first and second bytes
// `define CSS_id2_data  	    12'h204   // ID data for the third and fourth bytes
//CPPM registers
// `define CPPM_IFIFO_CTRL		12'h210	  //CPPM input FIFO control
// `define CPPM_C2BC_KEY		12'h211	  //CPPM C2 Block Cipher Key register
// `define CPPM_C2BC_DIN		12'h212	  //CPPM C2 Block Cipher data input register
// `define CPPM_C2BC_DOUT		12'h213   //CPPM C2 Block Cipher data result register
// `define CPPM_CMD			12'h214   //CPPM command and control register
// `define CPPM_CTRL_STATUS	12'h215   //CPPM control status, mainly for debug
// `define CPPM_IFIFO_DATA		12'h216   //CPPM input FIFO data pop port, just for debug
// --------------------------------------------
// PARSER_VIDEO2 DDR Interface
// --------------------------------------------
// The PARSER_VIDEO2 start pointer into DDR memory is a 32-bit number
// The Start pointer will automatically be truncated to land on
// an 8-byte boundary.  That is, bits [2:0] = 0;
#define PARSER_VIDEO2_START_PTR                    ((0x3893  << 2) + 0xffd00000)
#define PARSER_VIDEO2_END_PTR                      ((0x3894  << 2) + 0xffd00000)
// --------------------------------------------
// PARSER_VIDEO2 Buffer Level Manager
// --------------------------------------------
#define PARSER_VIDEO2_WP                           ((0x3895  << 2) + 0xffd00000)
#define PARSER_VIDEO2_RP                           ((0x3896  << 2) + 0xffd00000)
#define PARSER_VIDEO2_HOLE                         ((0x3897  << 2) + 0xffd00000)
// Bit [31:16] AUDIO_wrap_count
// Bit  [15:0] VIDEO2_wrap_count
#define PARSER_AV2_WRAP_COUNT                      ((0x3898  << 2) + 0xffd00000)
// DDR registers
//`define USE_DDR2
//========================================================================
//  DVIN Registers				    (12'h2e0 - 12'h2ef)
//
//========================================================================
// -----------------------------------------------
// CBUS_BASE:  DVIN_CBUS_BASE = 0x08
// -----------------------------------------------
// Bit 31:12 Rsrv
// Bit 11:10 RW, vs_hs_tim_ctrl: Controls which edge of HS/VS the active pixel/line is related:
//                               bit[0]=0: start of active pixel is counted from the rising edge of HS;
//                               bit[0]=1: start of active pixel is counted from the falling edge of HS;
//                               bit[1]=0: start of active line is counted from the rising edge of VS;
//                               bit[1]=1: start of active line is counted from the falling edge of VS.
// Bit     9 RW, sample_clk_neg: 1=invert input dvin_clk
// Bit  8: 7 RW, mode_422to444: 0=No convertion; 1=Rsrv; 2=Convert 422 to 444, use previous C value; 3=Convert 422 to 444, use average C value.
// Bit  6: 5 RW, de_mode: 0x=ignore input DE signal, use internal detection to to determine active pixel;
//                        10=during active pixel, if DE is low, replace input data with the last good data before DE goes low;
//                        11=Active pixel is determined by DE, no internal detection.
// Bit     4 RW, ext_field_sel: 1=Select external input Field, 0=Use internal detected Field.
// Bit     3 RW, field_pol_inv: set to 1 if input Field is low active and ext_field_sel=1
// Bit     2 RW, de_pol_inv: set to 1 if input DE is low active
// Bit     1 RW, vs_pol_inv: set to 1 if input VS is low active
// Bit     0 RW, hs_pol_inv: set to 1 if input HS is low active
#define DVIN_FRONT_END_CTRL                        ((0x08e0  << 2) + 0xffd00000)
// Bit 31:28 Reserved
// Bit 27:16 RW, hs_lead_vs_odd_max: Criteria for HW detecting odd/even Field internally: max clock cycles allowed for HS
//                                   active edge to lead before VS active edge, in odd field. Failing it the field is even.
// Bit 15:12 Reserved
// Bit 11: 0 RW, hs_lead_vs_odd_min: Criteria for HW detecting odd/even Field internally -- min clock cycles allowed for HS
//                                   active edge to lead before VS active edge, in odd field. Failing it the field is even.
#define DVIN_HS_LEAD_VS_ODD                        ((0x08e1  << 2) + 0xffd00000)
// Bit 31:28 Reserved
// Bit 27:16 RW, active_start_pix_fo
// Bit 15:12 Reserved
// Bit 11: 0 RW, active_start_pix_fe
#define DVIN_ACTIVE_START_PIX                      ((0x08e2  << 2) + 0xffd00000)
// Bit 31:28 Reserved
// Bit 27:16 RW, active_start_line_fo
// Bit 15:12 Reserved
// Bit 11: 0 RW, active_start_line_fe
#define DVIN_ACTIVE_START_LINE                     ((0x08e3  << 2) + 0xffd00000)
// Bit 31:28 Reserved
// Bit 27:16 RW, field_height_m1
// Bit 15:12 Reserved
// Bit 11: 0 RW, line_width_m1
#define DVIN_DISPLAY_SIZE                          ((0x08e4  << 2) + 0xffd00000)
// Bit    31 Rsrv
// Bit    30 R,  vs_in_polarity: 0=active high; 1=active low.
// Bit    29 R,  hs_in_polarity: 0=active high; 1=active low.
// Bit    28 R,  field_odd
// Bit 27:16 R,  hs_lead_vs_cnt
// Bit 15: 4 Rsrv
// Bit  3: 1 RW, data_comp_map: Re-map input data to form YCbCr.
//                              0=YCbCr is {[29:20], [19:10], [ 9: 0]};
//                              1=YCbCr is {[29:20], [ 9: 0], [19:10]};
//                              2=YCbCr is {[ 9: 0], [29:20], [19:10]};
//                              3=YCbCr is {[19:10], [29:20], [ 9: 0]};
//                              4=YCbCr is {[19:10], [ 9: 0], [29:20]};
//                              5=YCbCr is {[ 9: 0], [19:10], [29:20]};
//                              6,7=Rsrv
// Bit     0 RW, dvin_enable
#define DVIN_CTRL_STAT                             ((0x08e5  << 2) + 0xffd00000)
//========================================================================
//  DOS registers				    APB allocation from 32'hd0050000
//
//========================================================================
//=======================================================================
// XIF module
// `include "xregs.h"
    #define X_INT_ADR           0x400
    #define GPIO_ADR            0x401
    #define GPIO_ADR_H8         0x402
    #define WFIFO_DEPTH         8
    #define WFIFO_PointerWidth  3
    #define WFIFO_WORDSIZE      32
// MAC module
// move them to cpu domain.
//`define CLR_ACC_MAC         12'h410
//`define CLR_ACC_MAC2        12'h411
//`define ACC_0               12'h412
//`define ACC_1               12'h413
//`define ACC_2               12'h414
//`define ACC_3               12'h415
//========================================================================
//  Audio EQ DRC Interface				    (15'h1400 - 15'h14ff)
//
//========================================================================
//
// Reading file:  audio_eq_drc.h
//
// -----------------------------------------------
// CBUS_BASE:  AED_CBUS_BASE = 0x10
// -----------------------------------------------
#define AED_EQ_CH1_COEF00                          ((0x1000  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF01                          ((0x1001  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF02                          ((0x1002  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF03                          ((0x1003  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF04                          ((0x1004  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF10                          ((0x1005  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF11                          ((0x1006  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF12                          ((0x1007  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF13                          ((0x1008  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF14                          ((0x1009  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF20                          ((0x100a  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF21                          ((0x100b  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF22                          ((0x100c  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF23                          ((0x100d  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF24                          ((0x100e  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF30                          ((0x100f  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF31                          ((0x1010  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF32                          ((0x1011  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF33                          ((0x1012  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF34                          ((0x1013  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF40                          ((0x1014  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF41                          ((0x1015  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF42                          ((0x1016  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF43                          ((0x1017  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF44                          ((0x1018  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF50                          ((0x1019  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF51                          ((0x101a  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF52                          ((0x101b  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF53                          ((0x101c  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF54                          ((0x101d  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF60                          ((0x101e  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF61                          ((0x101f  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF62                          ((0x1020  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF63                          ((0x1021  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF64                          ((0x1022  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF70                          ((0x1023  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF71                          ((0x1024  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF72                          ((0x1025  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF73                          ((0x1026  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF74                          ((0x1027  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF80                          ((0x1028  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF81                          ((0x1029  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF82                          ((0x102a  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF83                          ((0x102b  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF84                          ((0x102c  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF90                          ((0x102d  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF91                          ((0x102e  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF92                          ((0x102f  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF93                          ((0x1030  << 2) + 0xffd00000)
#define AED_EQ_CH1_COEF94                          ((0x1031  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF00                          ((0x1032  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF01                          ((0x1033  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF02                          ((0x1034  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF03                          ((0x1035  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF04                          ((0x1036  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF10                          ((0x1037  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF11                          ((0x1038  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF12                          ((0x1039  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF13                          ((0x103a  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF14                          ((0x103b  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF20                          ((0x103c  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF21                          ((0x103d  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF22                          ((0x103e  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF23                          ((0x103f  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF24                          ((0x1040  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF30                          ((0x1041  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF31                          ((0x1042  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF32                          ((0x1043  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF33                          ((0x1044  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF34                          ((0x1045  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF40                          ((0x1046  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF41                          ((0x1047  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF42                          ((0x1048  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF43                          ((0x1049  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF44                          ((0x104a  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF50                          ((0x104b  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF51                          ((0x104c  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF52                          ((0x104d  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF53                          ((0x104e  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF54                          ((0x104f  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF60                          ((0x1050  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF61                          ((0x1051  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF62                          ((0x1052  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF63                          ((0x1053  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF64                          ((0x1054  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF70                          ((0x1055  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF71                          ((0x1056  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF72                          ((0x1057  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF73                          ((0x1058  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF74                          ((0x1059  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF80                          ((0x105a  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF81                          ((0x105b  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF82                          ((0x105c  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF83                          ((0x105d  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF84                          ((0x105e  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF90                          ((0x105f  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF91                          ((0x1060  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF92                          ((0x1061  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF93                          ((0x1062  << 2) + 0xffd00000)
#define AED_EQ_CH2_COEF94                          ((0x1063  << 2) + 0xffd00000)
#define AED_EQ_EN                                  ((0x1064  << 2) + 0xffd00000)
#define AED_EQ_VOLUME                              ((0x1065  << 2) + 0xffd00000)
#define AED_EQ_VOLUME_SLEW_CNT                     ((0x1066  << 2) + 0xffd00000)
#define AED_MUTE                                   ((0x1067  << 2) + 0xffd00000)
#define AED_DRC_EN                                 ((0x1070  << 2) + 0xffd00000)
#define AED_DRC_AE                                 ((0x1071  << 2) + 0xffd00000)
#define AED_DRC_AA                                 ((0x1072  << 2) + 0xffd00000)
#define AED_DRC_AD                                 ((0x1073  << 2) + 0xffd00000)
#define AED_DRC_AE_1M                              ((0x1074  << 2) + 0xffd00000)
#define AED_DRC_AA_1M                              ((0x1075  << 2) + 0xffd00000)
#define AED_DRC_AD_1M                              ((0x1076  << 2) + 0xffd00000)
#define AED_DRC_OFFSET0                            ((0x1077  << 2) + 0xffd00000)
#define AED_DRC_OFFSET1                            ((0x1078  << 2) + 0xffd00000)
#define AED_DRC_THD0                               ((0x1079  << 2) + 0xffd00000)
#define AED_DRC_THD1                               ((0x107a  << 2) + 0xffd00000)
#define AED_DRC_K0                                 ((0x107b  << 2) + 0xffd00000)
#define AED_DRC_K1                                 ((0x107c  << 2) + 0xffd00000)
#define AED_CLIP_THD                               ((0x107d  << 2) + 0xffd00000)
#define AED_NG_THD0                                ((0x107e  << 2) + 0xffd00000)
#define AED_NG_THD1                                ((0x107f  << 2) + 0xffd00000)
#define AED_NG_CNT_THD                             ((0x1080  << 2) + 0xffd00000)
#define AED_NG_CTL                                 ((0x1081  << 2) + 0xffd00000)
#define AED_ED_CTL                                 ((0x1082  << 2) + 0xffd00000)
#define AED_DEBUG0                                 ((0x1083  << 2) + 0xffd00000)
#define AED_DEBUG1                                 ((0x1084  << 2) + 0xffd00000)
#define AED_DEBUG2                                 ((0x1085  << 2) + 0xffd00000)
#define AED_DEBUG3                                 ((0x1086  << 2) + 0xffd00000)
#define AED_DEBUG4                                 ((0x1087  << 2) + 0xffd00000)
#define AED_DEBUG5                                 ((0x1088  << 2) + 0xffd00000)
#define AED_DEBUG6                                 ((0x1089  << 2) + 0xffd00000)
#define AED_TOP_CTL                                ((0x1090  << 2) + 0xffd00000)
//
// Closing file:  audio_eq_drc.h
//
//========================================================================
//  Audio Interface				    (12'h500 - 12'h5ff)
//
//========================================================================
//
// Reading file:  aregs.h
//
//========================================================================
//  Audio Interface                                 (8'h00 - 8'hff)
//  Modified : Xuyun Chen Jan 2001
//========================================================================
// Number of bytes expected per NON-PCM frame, including the header.
// 16 bits.
// -----------------------------------------------
// CBUS_BASE:  AIU_CBUS_BASE = 0x14
// -----------------------------------------------
#define AIU_958_BPF                                ((0x1400  << 2) + 0xffd00000)
// Value of burst_info used in IEC958 preamble for a NON-PCM frame. See
// ATSC AC-3 spec Annex B. 16 bits.
#define AIU_958_BRST                               ((0x1401  << 2) + 0xffd00000)
// Value of length_code used in IEC958 preamble for an NON-PCM frame. See
// ATSC AC-3 spec Annex B. 16 bits.
#define AIU_958_LENGTH                             ((0x1402  << 2) + 0xffd00000)
// How many subframes to padd around the NON-PCM frame. This will
// be set to 'd3072 if it is a AC-3 audio stream.
// 16 bits
#define AIU_958_PADDSIZE                           ((0x1403  << 2) + 0xffd00000)
// 16'd3072
// Misc. control settings for IEC958 interface
// Bit 15:14 pcm_sample_ctl, 00-pcm_no_sample, 01-pcm_sample_up, 10-pcm_sample_down, 11-pcm_sample_down_drop
// Bit 13: if true, force each audio data to left or right according to the bit attached with the audio data
//         This bit should be used with Register AIU_958_force_left(0x505) together
// Bit 12: if true, the U(user data) is from the stream otherwise it is filled by
//                   zero while encoding iec958 frame
// Bit 11   : if true big endian(highword,lowword) otherwise little endian(lowword,highword)
//            for 32bit mode
// Bit 10:8 : shift number for 32 bit mode
// Bit 7  : 32 bit mode turn on while This bit is true and Bit 1 is true
// Bit 6:5 : Specifies output alignment for 16 bit pcm data.
//          00 : dout = {8'b0, din};
//          01 : dout = {4'b0, din, 4'b0};
//          10 : dout = {      din, 8'b0};
// Bit 4  : True if data should be sent out MSB first. LSB first is the
//          default in the spec.
// Bit 3  : True if msb should be extended (only used with 16 bit pcm data.)
// Bit 2  : True if msb of PCM data should be inverted.
// Bit 1  : True if PCM data is 16 bits wide. False if 24 bit or 32bit mode.
// Bit 0  : True if source data is non-PCM data. False if it is PCM data.
#define AIU_958_MISC                               ((0x1404  << 2) + 0xffd00000)
// 14'b0_0_0_000_0_0000001
// A write to this register specifies that the next pcm sample sent out
// of the iec958 interface should go into the _left_ channel.
#define AIU_958_FORCE_LEFT                         ((0x1405  << 2) + 0xffd00000)
//Read Only
//bit 6:0  how many data discarded in the last dma after one frame data finish transfering to AIU
// should used together with register AIU_958_dcu_ff_ctrl
#define AIU_958_DISCARD_NUM                        ((0x1406  << 2) + 0xffd00000)
//bit 15:8  : A read from this register indicates the IEC958 FIFO count value
//bit 7 :  ai_958_req_size if ture, set to 8 bits interface, used to handle odd frame continous read
//bit 6 :  continue seeking and dont discard the rest data in one dma after frame end
//bit 5 :  if true, byte by byte seeking, otherwise word by word seeking
//bit 4 :  if true, the function for sync head seeking is enabled
//bit 3:2 :	IEC958 interrupt mode
// There are two conditions to generate interrupt. The First condition is that one frame data
// have been finished writing into FIFO. The second condition is at least some data of the current
// frame have been read out(refer to Register AIU_958_ffrdout_thd)
//			00: interrupt is not generated
//			10:	interrupt is generated if the first condition is true
//			01:	interrupt is generated if the second condition is true
//			11:	interrupt is generated if both of the conditions are true
//bit 1: fifo auto disable, High means after one frame data put into the FIFO, the FIFO
//					will automatically disabled
//bit 0: fifo enable
#define AIU_958_DCU_FF_CTRL                        ((0x1407  << 2) + 0xffd00000)
// 'b0_0_1_11_1_0
// channel status registers for Left channel
// chstat_l0[15:0] contains bits 15:0 of the channel status word. Note
// that bit zero of the channel status word is sent out first.
// chstat_l1[15:0] contains bits 31:16 of the channel status word.
#define AIU_958_CHSTAT_L0                          ((0x1408  << 2) + 0xffd00000)
#define AIU_958_CHSTAT_L1                          ((0x1409  << 2) + 0xffd00000)
// Control register for IEC958 interface
// Bit 9:8 what to do if there is a fifo underrun
//         00 => insert 24'h000000
//         01 => insert mute constant as defined below
//         10 => repeat last l/r samples
// Bit 7:5 mute constant
//         000 => 24'h000000
//         001 => 24'h800000
//         010 => 24'h080000
//         011 => 24'h008000
//         100 => 24'h000001
//         101 => 24'h000010
//         110 => 24'h000100
// Bit 4   mute left speaker
// Bit 3   mute right speaker
// Bit 2:1 swap channels
//         00 : L R => L R
//         01 : L R => L L
//         10 : L R => R R
//         11 : L R => R L
// Bit 0   Set this bit to hold iec958 interface after the current
//         subframe has been completely transmitted.
#define AIU_958_CTRL                               ((0x140a  << 2) + 0xffd00000)
// 10'b00_000_00_00_0
// A write operation to this register will cause one of the output samples
// to be repeated. This can be used to switch the left and the right
// channels.
#define AIU_958_RPT                                ((0x140b  << 2) + 0xffd00000)
// Channel swap and mute control register.
// Bit 15: Mute extra left channel
// Bit 14: Mute extra right channel
// Bit 13: Mute center
// Bit 12: Mute subwoofer
// Bit 11: Mute surround left
// Bit 10: Mute surround right
// Bit  9: Mute left
// Bit  8: Mute right
// Bit 7:6 Channel swap for xtra dac
// Bit 5:4 Channel swap for sub/center dac
// Bit 3:2 Channel swap for surround dac
// Bit 1:0 Channel swap for main l/r dac
// Channel swap possibilities:
// 00 : L R => L R
// 01 : L R => L L
// 10 : L R => R R
// 11 : L R => R L
#define AIU_I2S_MUTE_SWAP                          ((0x140c  << 2) + 0xffd00000)
// 16'b0
// Bit 0 : 0=> single two channel stream
//         1=> four two channel streams
#define AIU_I2S_SOURCE_DESC                        ((0x140d  << 2) + 0xffd00000)
// Median filter control register
// Bit 1:  0=> data is offset binary
//         1=> data is signed
// Bit 0:  enable median filter
#define AIU_I2S_MED_CTRL                           ((0x140e  << 2) + 0xffd00000)
// 2'b10
// Median filter threshold constant
// 16 bits
#define AIU_I2S_MED_THRESH                         ((0x140f  << 2) + 0xffd00000)
// 16'h8000
// Describes dac's connected to I2S interface
// Bit 7:  sign extend sample before downshift.
// Bit 6:4 payload downshift constant
// Bit 3:  mute constant
//         0 => 'h0000000
//         1 => 'h800000
// Bit 2:  send msb first
// Bit 1:0 Size of payload
//         Note that this parameter used to be called "size of dacs"
//         It is now called the payload size since a 24 bit payload can
//         actually be connected to any size of dac. The dac will simply
//         disregard the extra bits.
//         00 => 16 bit, alrclk = aoclk/32
//         01 => 20 bit, alrclk = aoclk/40
//         10 => 24 bit, alrclk = aoclk/48
//		   11 => 24 bit, but alrclk = aoclk/64
#define AIU_I2S_DAC_CFG                            ((0x1410  << 2) + 0xffd00000)
// 8'b0_000_1_1_10
// A write to this register will cause the interface to repeat the current
// sample. Can be used to regain synchronization.
// A read from this register indicates that the next sample to be sent
// out of the interface should go into the _left_ channel of the dac.
#define AIU_I2S_SYNC                               ((0x1411  << 2) + 0xffd00000)
// Misc regs
// Bit 4 if true, force each audio data to left or right according to the bit attached with the audio data
//         This bit should be used with Register AIU_i2s_sync(0x511) together
// Bit 3:  Same Audio source for IEC958 and I2s stream 0, both from i2s buffer
// Bit 2:  Set this bit to put i2s interface in hold mode
// Bit 1:0 How to handle underruns
//         00 => send zeros
//         01 => send 'h800000
//         10 => repeat last samples
#define AIU_I2S_MISC                               ((0x1412  << 2) + 0xffd00000)
// 5'b0
// Bit 7:0 Audio output config.
//			2 bits for each dac, 7:6 for dac3, 5:4 for dac2,
//								 3:2 for dac1, 1:0 for dac0
//			For each 2bits: 00: connect channel0-1 to the dac
//							01: connect channel2-3 to the dac
//							10: connect channel4-5 to the dac
//							11: connect channel6-7 to the dac
#define AIU_I2S_OUT_CFG                            ((0x1413  << 2) + 0xffd00000)
// 8'b0_000000_0
#define AIU_I2S_FF_CTRL                            ((0x1414  << 2) + 0xffd00000)
// A write to this register resets the AIU
//Bit 3 reset slow domain iec958
//Bit 2 soft reset iec958 fast domain
//Bit 1 reset slow domain i2s
//Bit 0 soft reset i2s fast domain
#define AIU_RST_SOFT                               ((0x1415  << 2) + 0xffd00000)
// Clock generation control register
// Bit 15: enable_ddr_arb, set low to reset
// Bit 14:13 parser_A_addr_sel  00-A_addr_aififo2, 01-A_addr_iec958, 10-A_addr_aififo, 11-A_addr_i2s
// Bit 12: 958 divisor more, if true, divided by 2, 4, 6, 8
// Bit 11: amclk output divisor
//			0 => dont divide
//			1 => divide by 2
// Bit 10: clock source selection
//        0 => aiclk from pin
//        1 => ai_pll_clk from pll
// Bit 9:8 alrclk skew
//         00 => alrclk transitions at the same time msb is sent
//         01 => alrclk transitions on the cycle before msb is sent
//         10 => alrclk transitions on the cycle after msb is sent
// Bit 7: invert alrclk
// Bit 6: invert aoclk
// Bit 5:4 958 divisor
//        00 => divide by 1
//        01 => divide by 2
//		  10 => divide by 3
//		  11 => divide by 4
// Bit 3:2 i2s divisor. NOTE: this value is ignored if AIU_clk_ctrl_more[5:0] != 0
//         00 => divide by 1
//         01 => divide by 2
//         10 => divide by 4
//         11 => divide by 8
// Bit 1: enable 958 divider
// Bit 0: enable i2s divider
#define AIU_CLK_CTRL                               ((0x1416  << 2) + 0xffd00000)
// 13'b0_0_1_01_1_1_10_11_0_0
// Misc settings that determine the type of adc that is
// connected to the AIU. Reverb mode is deleted.
// Bit 12:  selects adc input
// Bit 11:10 adc size
//           00 => 16 bits
//           01 => 18 bits
//           10 => 20 bits
//           11 => 24 bits
// Bit 9:8   adc l/r swap mode
//           00 => stereo
//           01 => send the right adc input to both l and r speakers
//           01 => send the left adc input to both l and r speakers
//           11 => sum the left and right inputs and forward to
//                both speakers
// Bit 7:5 adata/lrclk skew mode
// Bit 4   1=>invert the adc's lrclk (This is the lrclk going _out_
//         of the chip.
// Bit 3   1=>Latch the data on the positive edge of the _internal_
//         aoclk.
// Bit 2   1=>adc data is in signed 2's complement mode
#define AIU_MIX_ADCCFG                             ((0x1417  << 2) + 0xffd00000)
// 12'b01_00_001_1_0_1_00
// Control register that can be changed dynamically. These control
// signals are synchronized internally.
// Bit 12:  if true, toggle each mixed audio data to left or right channel
// Bit 11:  abuf din left selection, if true, select bit 24 of the data from abuf
//		    otherwise select bit 25 of the data from abuf
// Bit 10:9  mix sync select, when music, mic and abuf are mixed togather, the main
//			 sync source can be selected
//     00: not sync source
//	   01: music data is the main sync source
//	   10: abuf input data is the main sync source
//	   11: music and abuf togather as the sync source
// Bit 8:  0=> data from abuf is offset binary
//         1=> data from abuf is signed
// Bit 7:6 the source for data from aiu to abuf
//           00 => mic
//           01 => mic saled + abuf scaled
//           10 => mic scaled + abuf scaled + music scaled
//			 11 => music
// Bit 5   channel from aiu to abuf is on
// Bit 4   channel from abuf to aiu is on
// Bit 3   mic is on
// Bit 2   music is on
// Bit 1   if true the mixed data are outputed to i2s dac channel,
//			otherwise the mixed data are outputed to IEC958 output
// Bit 0   if true music source for mixing is from i2s buffer,
//			otherwise music source is from iec958 buffer
#define AIU_MIX_CTRL                               ((0x1418  << 2) + 0xffd00000)
// 11'b01_1_01_0_0_0_1_1_1
// Bit    15 invert_audin_sclk.
// Bit    14 enable_adc_sclk.
// Bit 13: 8 divisor_adc_sclk.
// Bit     7 invert_acodec_adc_sclk.
// Bit     6 hdmitx_sel_aoclkx2: 0=Select cts_clk_i958 as AIU clk to hdmi_tx_audio_master_clk; 1=Select cts_aoclkx2_int as AIU clk to hdmi_tx_audio_master_clk;
// Bit  5: 0 More control on i2s divisor. For backward compatiblity, this value is ignored if is 0,
//           if non-zero, it takes effect over AIU_clk_ctrl[3:2].
//           0=i2s divisor will use the old value in AIU_clk_ctrl[3:2] (divide by 1/2/4/8)
//           1=divide by 2;
//           2=divide by 3;
//           3=divide by 4;
//           ... and so on ...
//           63=divide by 64.
#define AIU_CLK_CTRL_MORE                          ((0x1419  << 2) + 0xffd00000)
// A read from this register pops 16 bits of data off the 958
// fifo. A write has no effect.
#define AIU_958_POP                                ((0x141a  << 2) + 0xffd00000)
//gain register for mixing
// for each gain,
//			 00000: x 0
//			 00001: x 1
//			 00010: x 2
//           00011: x 3
//			 00100: x 4
//			 00101: x 5
//			 00110: x 6
//			......
//           01110: x14
//           01111: x15
//           10000: x 0
//           10001: x 1/16
//           10010: x 2/16
//           10011: x 3/16
//           10100: x 4/16
//			......
//           11110: x 14/16
//           11111: x 15/16
//Bit 14:10 mic gain
//Bit 9:5 	abuf gain
//Bit 4:0 music gain
#define AIU_MIX_GAIN                               ((0x141b  << 2) + 0xffd00000)
// 15'b00001_00001_00001
//sync head seeking is supported. The  maxinium length of sync head is
//48-bit-wide.(in byte by byte seeking mode, the maximium is 44-bit-wide).
//It is consisted of 3 words (synword1_synword2_syncword3).
//You can configure the sync head pattern by using sync mask(mask1_mask2_mask3).
//For example. AC-3 sync head is a 16-bit word(0b77), so syncword1 is set as 0b77,
//mask1 is 0000(not set), mask2 and mask3 is all masked.
#define AIU_958_SYNWORD1                           ((0x141c  << 2) + 0xffd00000)
//16'h0b77  //ac-3 sync head
#define AIU_958_SYNWORD2                           ((0x141d  << 2) + 0xffd00000)
//16'h0000
#define AIU_958_SYNWORD3                           ((0x141e  << 2) + 0xffd00000)
//16'h0000
#define AIU_958_SYNWORD1_MASK                      ((0x141f  << 2) + 0xffd00000)
//16'h0000 //16-bit ac-3 sync_head
#define AIU_958_SYNWORD2_MASK                      ((0x1420  << 2) + 0xffd00000)
//16'hffff
#define AIU_958_SYNWORD3_MASK                      ((0x1421  << 2) + 0xffd00000)
//16'hffff
//fifo read-out threshold, one condition to generate interrupt is met after fifo readout counter
//reach this value in a frame, please refer to register AIU_958_dcu_ff_ctrl
#define AIU_958_FFRDOUT_THD                        ((0x1422  << 2) + 0xffd00000)
//'h0004
//For pause burst sequence adding, one pause burst sequence is consist of a serious
// pause burst.
//This register defines the length of each pause burst in a pause burst sequence. The size of the
//preamble(Pa, Pb, Pc, Pd) is not counted, but the size of stuff data is counted.
#define AIU_958_LENGTH_PER_PAUSE                   ((0x1423  << 2) + 0xffd00000)
//'h0000
//This reigster defines the number of pause burst in a pause burst sequence.
//Bit 15  if true, one pause burst sequence will be added
//Bit 14:0 the number of pause burst in a pause burst sequence
#define AIU_958_PAUSE_NUM                          ((0x1424  << 2) + 0xffd00000)
//'h0000
//The first 16-bit in the payload of pause burst sequence (gap_length)
#define AIU_958_PAUSE_PAYLOAD                      ((0x1425  << 2) + 0xffd00000)
//'h0000
//For auto pause function, when enabled, pause burst sequence will be automatically added if the data in
// 958 fifo is less than auto_pause threshold and if fifo is disabled.
//Bit 15   if true, auto pause function enable
//Bit 14   pause pack option, just for debugging and adding one option
//Bit 7:0  auto_pause threshold
#define AIU_958_AUTO_PAUSE                         ((0x1426  << 2) + 0xffd00000)
//'h0000
//pause burst sequence payload length( = AIU_958_pause_num * AIU_958_length_per_pause)
#define AIU_958_PAUSE_PD_LENGTH                    ((0x1427  << 2) + 0xffd00000)
//'h0000
// Bit 15:12 Rsrv.
// Bit 11: 0 dac_lrclk_div: Default is 48-1=47, which means lrclk is sclk divide by 48.
#define AIU_CODEC_DAC_LRCLK_CTRL                   ((0x1428  << 2) + 0xffd00000)
//'h002f
// Bit 15:14 Rsrv.
// Bit    13 inv_audin_lrclk: whether to invert lrclk before output to Audin
// Bit    12 inv_acodec_adc_lrclk: whether to invert lrclk before output to Audio Codec
// Bit 11: 0 adc_lrclk_div: Default is 48-1=47, which means lrclk is sclk divide by 48.
#define AIU_CODEC_ADC_LRCLK_CTRL                   ((0x1429  << 2) + 0xffd00000)
//'h002f
// Bit 15:6 Rsrv.
// Bit  5: 4 hdmi_data_sel: 00=output 0, disable hdmi data; 01=Select pcm data; 10=Select AIU I2S data; 11=Not allowed.
// Bit  3: 2 Rsrv.
// Bit  1: 0 hdmi_clk_sel: 00=Disable output hdmi clock; 01=Select pcm clock; 10=Select AIU clk; 11=Not allowed.
#define AIU_HDMI_CLK_DATA_CTRL                     ((0x142a  << 2) + 0xffd00000)
//'h0000
// Bit 15:6 Rsrv.
// Bit  5: 4 acodec_data_sel: 00=output 0, disable acodec_sdin; 01=Select pcm data; 10=Select AIU I2S data; 11=Not allowed.
// Bit  3: 2 Rsrv.
// Bit  1: 0 acodec_clk_sel: 00=Disable output acodec_sclk; 01=Select pcm clock; 10=Select AIU aoclk; 11=Not allowed.
#define AIU_CODEC_CLK_DATA_CTRL                    ((0x142b  << 2) + 0xffd00000)
//'h0000
#define AIU_ACODEC_CTRL                            ((0x142c  << 2) + 0xffd00000)
// channel status registers for right channel
// chstat_r0[15:0] contains bits 15:0 of the channel status word. Note
// that bit zero of the channel status word is sent out first.
// chstat_r1[15:0] contains bits 31:16 of the channel status word.
#define AIU_958_CHSTAT_R0                          ((0x1430  << 2) + 0xffd00000)
#define AIU_958_CHSTAT_R1                          ((0x1431  << 2) + 0xffd00000)
//Bit 1 	if true, turn on Digital output Valid control
//Bit 0		0: output 0, 1: output 1 to the valid bit in audio digital output when Bit 1 is true
#define AIU_958_VALID_CTRL                         ((0x1432  << 2) + 0xffd00000)
//-----------------------------------------------------------------------------
// Audio Amplifier controls
//-----------------------------------------------------------------------------
#define AIU_AUDIO_AMP_REG0                         ((0x143c  << 2) + 0xffd00000)
#define AIU_AUDIO_AMP_REG1                         ((0x143d  << 2) + 0xffd00000)
#define AIU_AUDIO_AMP_REG2                         ((0x143e  << 2) + 0xffd00000)
#define AIU_AUDIO_AMP_REG3                         ((0x143f  << 2) + 0xffd00000)
//-----------------------------------------------------------------------------
//add for AIFIFO2 channel
//-----------------------------------------------------------------------------
//Bit 3 	CRC pop aififo2 enable
//Bit 2		writing to this bit to 1 causes CRC module reset
//Bit 1		unused
//Bit 0		writing to this bit to 1 causes AIFIFO2 soft reset
#define AIU_AIFIFO2_CTRL                           ((0x1440  << 2) + 0xffd00000)
//'h0000
//AIFIFO2 status register
//Bit 4:0		//how many bits left in the first pop register
#define AIU_AIFIFO2_STATUS                         ((0x1441  << 2) + 0xffd00000)
//Same fucntion as the AIGBIT of AIFIFO in CDROM module
//write to this register how many bits wanna pop,
//and reading this register gets the corresponding bits data
#define AIU_AIFIFO2_GBIT                           ((0x1442  << 2) + 0xffd00000)
//Same function as the AICLB of AIFIFO in CDROM module
//return the leading zeros by reading this registers
#define AIU_AIFIFO2_CLB                            ((0x1443  << 2) + 0xffd00000)
//CRC control register, read/write
//Bit 0		CRC caculation start
//Bit 1		CRC core soft reset
//Bit 2		CRC input register clear
//Bit 3		CRC pop data from FIFO enable
//Bit 13:8	CRC polynomial equation order, between 1 to 32
#define AIU_CRC_CTRL                               ((0x1444  << 2) + 0xffd00000)
//16'h1000
//CRC status register, read only
//Bit 7:4	CRC internal shift register bit select, just for debug purpose
//Bit 3		CRC internal shift register data valid, just for debug purpose
//Bit 2		CRC input register data valid
//Bit 1		CRC result, 1: CRC not correct, 0: CRC correct
//Bit 0		CRC state,  1: CRC busy, 0: CRC idle
#define AIU_CRC_STATUS                             ((0x1445  << 2) + 0xffd00000)
//CRC internal shift register, read only, for debug purpose
#define AIU_CRC_SHIFT_REG                          ((0x1446  << 2) + 0xffd00000)
//CRC data input register, read/write
#define AIU_CRC_IREG                               ((0x1447  << 2) + 0xffd00000)
//16'h0000
//CRC calculation register high-bit part [31:16], read/write
#define AIU_CRC_CAL_REG1                           ((0x1448  << 2) + 0xffd00000)
//CRC calculation register low-bit part [15:0], read/write
#define AIU_CRC_CAL_REG0                           ((0x1449  << 2) + 0xffd00000)
//32'h00000000
//CRC polynomial coefficient high-bit part [31:16], read/write
#define AIU_CRC_POLY_COEF1                         ((0x144a  << 2) + 0xffd00000)
//CRC polynomial coefficient low-bit part [15:0], read/write
#define AIU_CRC_POLY_COEF0                         ((0x144b  << 2) + 0xffd00000)
//32'h80050000			default CRC-16
//CRC frame size, high-bit part [19:16], read/write
#define AIU_CRC_BIT_SIZE1                          ((0x144c  << 2) + 0xffd00000)
//CRC frame size, low-bit part [15:0],	 read/write
#define AIU_CRC_BIT_SIZE0                          ((0x144d  << 2) + 0xffd00000)
//20'hfffff
//how many bits have been processed right now in the current frame, read only
//high-bit part [19:16]
#define AIU_CRC_BIT_CNT1                           ((0x144e  << 2) + 0xffd00000)
//low-bit part [15:0]
#define AIU_CRC_BIT_CNT0                           ((0x144f  << 2) + 0xffd00000)
// -------------------------------------
// AMCLK Measurement
// -------------------------------------
// Used to measure the amclk frequency
#define AIU_AMCLK_GATE_HI                          ((0x1450  << 2) + 0xffd00000)
#define AIU_AMCLK_GATE_LO                          ((0x1451  << 2) + 0xffd00000)
#define AIU_AMCLK_MSR                              ((0x1452  << 2) + 0xffd00000)
#define AIU_AUDAC_CTRL0                            ((0x1453  << 2) + 0xffd00000)
// -------------------------------------
// Super Simple Delta Sigma DAC
// -------------------------------------
// bit 15   1 = invert the clock to the analog filter
// bit 14   1 = digital mute
// bit 13   1 = enable analog mute (in the analog block)
// bit 12   1 = enable Right channel 3 in the analog block
// bit 11   1 = enable Left  channel 3 in the analog block
// bit 10   1 = enable Right channel 2 in the analog block
// bit  9   1 = enable Left  channel 2 in the analog block
// bit  8   1 = enable Right channel 1 in the analog block
// bit  7   1 = enable Left  channel 1 in the analog block
// bit  6   1 = enable Right channel 0 in the analog block
// bit  5   1 = enable Left  channel 0 in the analog block
// bit  4:  bit select for serial input data
// bit  3:  invert alrclk used by the delta-sigma DAC
// bit  2:  1 = use serial I2S data.  0 = use parallel audio data
// bits 1:0 Which data to send to the delta-sigma DAC
//              11 = use channel 3 data
//              10 = use channel 2 data
//              01 = use channel 1 data
//              00 = use channel 0 data
#define AIU_DELTA_SIGMA0                           ((0x1455  << 2) + 0xffd00000)
// Delta Sigma MUTE Value
#define AIU_DELTA_SIGMA1                           ((0x1456  << 2) + 0xffd00000)
// Additional Audio filter controls
#define AIU_DELTA_SIGMA2                           ((0x1457  << 2) + 0xffd00000)
//Bit 14, left channel Delta Sigma modulator soft reset
//Bit 13, right channel Delta Sigma modulator soft reset
//Bit 12, left channel Delta Sigma modulator internal state clear enable when it is unstable
//Bit 11, right channel Delta Sigma modulator internal state clear enable when it is unstable
//Bit 10, left channel Delta Sigma detect unstable state enable
//Bit  9, right channel Delta Sigma detect unstable state enable
//Bit  8, dither high pass filter enable in the Delta Sigma loop
//Bit 7:6, reserved
//Bit 5:0, Delta Sigma input data gain  0/32 ~ 63/32
//default: 16'h3
#define AIU_DELTA_SIGMA3                           ((0x1458  << 2) + 0xffd00000)
//15:8, Added Delta Sigma DC level, range:+-1/2, minimium: +-1/128 (assume max is -1 ~ +1)
//7:0, max same sequence number, used for unstable detection
//default: 16'h0
#define AIU_DELTA_SIGMA4                           ((0x1459  << 2) + 0xffd00000)
//Bit 15:8, square wave divide num
//Bit 7:0, square wave amplitude, -1/4 ~ 1/4, minimium: +-1/1024
//default: 16'h0
#define AIU_DELTA_SIGMA5                           ((0x145a  << 2) + 0xffd00000)
//Bit 11:8, loop dither amplitude2, 0/32 ~ 15/32
//Bit 7:4,  loop dither amplitude1, 0/32 ~ 15/32
//Bit 3:0,  loop dither amplitude0, 0/32 ~ 15/32
//default: 16'h0
#define AIU_DELTA_SIGMA6                           ((0x145b  << 2) + 0xffd00000)
//Bit 15:8, loop dithering threshold1   0, 1/512, 2/512 ... 1/2
//Bit 7:0,  loop dithering threshold0   0, 1/512, 2/512 ... 1/2
//default: 16'h0
#define AIU_DELTA_SIGMA7                           ((0x145c  << 2) + 0xffd00000)
//read only
//Bit 15:8  left channel Delta Sigma clear counter number, how many times Delta Sigma has been reseted
//          It will saturate to 255, if more than 255 time
//Bit 7:0   left channel max same sequence number
#define AIU_DELTA_SIGMA_LCNTS                      ((0x145d  << 2) + 0xffd00000)
//read only
//Bit 15:8  right channel Delta Sigma clear counter number, how many times Delta Sigma has been reseted
//          It will saturate to 255, if more than 255 time
//Bit 7:0   right channel max same sequence number
#define AIU_DELTA_SIGMA_RCNTS                      ((0x145e  << 2) + 0xffd00000)
// --------------------------------------------
// I2S DDR Interface
// --------------------------------------------
// The I2S start pointer into DDR memory is a 32-bit number
#define AIU_MEM_I2S_START_PTR                      ((0x1460  << 2) + 0xffd00000)
#define AIU_MEM_I2S_RD_PTR                         ((0x1461  << 2) + 0xffd00000)
#define AIU_MEM_I2S_END_PTR                        ((0x1462  << 2) + 0xffd00000)
// There are two masks that control how data is read:
// [31:16] IRQ block.
// [15:8] chan_mem_mask.  Each bit indicates which channels exist in memory
// [7:0]  chan_rd_mask.   Each bit indicates which channels are READ from memory
#define AIU_MEM_I2S_MASKS                          ((0x1463  << 2) + 0xffd00000)
// I2S FIFO Control
// bits [11:10] Select which hardware pointer to use to control the buffer
//              level:
//                  00 = parser
//                  01 = audin_fifo0_wrpt
//                  1x = audin_fifo1_wrpt
// bit  [9]     Use level control: 1 = use buffer level control
// bit  [8]     Read Only.  This bit is 1 when there is data available for reading
// bit  [7]     Read only.  This bit will be high when we're fetching data from the DDR memory
//              To reset this module, set cntl_enable = 0, and then wait for busy = 0.
//              After that you can pulse cntl_init to start over
// bit  [6]     cntl_mode_16bit:Set to 1 for 16 bit storage format in DDR
// bits [5:3]   endian:  see $lib/rtl/ddr_endian.v
// bit  [2]     cntl_empty_en   Set to 1 to enable reading data from the FIFO
// bit  [1]     cntl_fill_en    Set to 1 to enable reading data from DDR memory
// bit  [0]     cntl_init:      After setting the read pointers, sizes, channel masks
//                              and read masks, set this bit to 1 and then to 0
#define AIU_MEM_I2S_CONTROL                        ((0x1464  << 2) + 0xffd00000)
// --------------------------------------------
// IEC958 DDR Interface
// --------------------------------------------
// The IEC958 start pointer into DDR memory is a 32-bit number
#define AIU_MEM_IEC958_START_PTR                   ((0x1465  << 2) + 0xffd00000)
#define AIU_MEM_IEC958_RD_PTR                      ((0x1466  << 2) + 0xffd00000)
#define AIU_MEM_IEC958_END_PTR                     ((0x1467  << 2) + 0xffd00000)
// There are two masks that control how data is read:
// [15:8] chan_mem_mask.  Each bit indicates which channels exist in memory
// [7:0]  chan_rd_mask.   Each bit indicates which channels are READ from memory
#define AIU_MEM_IEC958_MASKS                       ((0x1468  << 2) + 0xffd00000)
// IEC958 FIFO Control
// bit  [31]    A_urgent
// bit  [30]    ch_always_8
// bit  [29:24] rdata_rd_base_begin ( used for select from different channel )
// bit  [23:14] reserved
// bit  [13]    cntl_sim_en
// bit  [12]    cntl_use_level
// bit  [11]    Read only.      This bit will be set to 1 when there is data in the FIFO to process
// bit  [10]    Read only.  This bit will be high when we're fetching data from the DDR memory
//              To reset this module, set cntl_enable = 0, and then wait for busy = 0.
//              After that you can pulse cntl_init to start over
// bit  [9]     cntl_endian_jic Just in case endian.  last minute byte swap of the data out of
//                              the FIFO to the rest of the IEC958 logic
// bit  [8]     mode_raw:       Set this bit to 1 to tell the IEC958 FIFO to read
//                              and process data linearly for raw data.
// bit  [7]     cntl_mode_16bit:Set to 1 for 16 bit storage format in DDR.  Only valid when mode_raw = 0
// bit  [6]     cntl_rd_ddr     Set this bit to read if you want AIU_MEM_IEC958_RD_PTR and
//                              AIU_MEM_IEC958_RD_PTR_HIGH to refer to the pointer into DDR memory.
//                              Otherwise, the curr_ptr registers refer to the byte address of the data
//                              at the output of the FIFO to the rest of the IEC958 logic
// bits [5:3]   endian:         see $lib/rtl/ddr_endian.v
// bit  [2]     cntl_empty_en   Set to 1 to enable reading the DDR memory FIFO and filling the pipeline to get-bit
//                              Set cntl_empty_en = cntl_fill_en = 0 when pulsing cntl_init
// bit  [1]     cntl_fill_en    Set to 1 to enable reading data from DDR memory
// bit  [0]     cntl_init:      After setting the read pointers, sizes, channel masks
//                              and read masks, set this bit to 1 and then to 0
#define AIU_MEM_IEC958_CONTROL                     ((0x1469  << 2) + 0xffd00000)
// --------------------------------------------
// AIFIFO2 DDR Interface
// --------------------------------------------
// The AIFIFO2 start pointer into DDR memory is a 32-bit number
// The Start pointer will automatically be truncated to land on
// an 8-byte boundary.  That is, bits [2:0] = 0;
#define AIU_MEM_AIFIFO2_START_PTR                  ((0x146a  << 2) + 0xffd00000)
// The current pointer points so some location between the START and END
// pointers.  The current pointer is a BYTE pointer.  That is, you can
// point to any BYTE address within the START/END range
#define AIU_MEM_AIFIFO2_CURR_PTR                   ((0x146b  << 2) + 0xffd00000)
#define AIU_MEM_AIFIFO2_END_PTR                    ((0x146c  << 2) + 0xffd00000)
#define AIU_MEM_AIFIFO2_BYTES_AVAIL                ((0x146d  << 2) + 0xffd00000)
// AIFIFO2 FIFO Control
// bit  [15:11] unused
// bit  [10]    use_level       Set this bit to 1 to enable filling of the FIFO controlled by the buffer
//                              level control.  If this bit is 0, then use bit[1] to control the enabling of filling
// bit  [9]     Data Ready.     This bit is set when data can be popped
// bit  [8]     fill busy       This bit will be high when we're fetching data from the DDR memory
//                              To reset this module, set cntl_enable = 0, and then wait for busy = 0.
//                              After that you can pulse cntl_init to start over
// bit  [7]     cntl_endian_jic Just in case endian.  last minute byte swap of the data out of
//                              the FIFO to getbit
// bit  [6]     unused
// bits [5:3]   endian:         see $lib/rtl/ddr_endian.v
// bit  [2]     cntl_empty_en   Set to 1 to enable reading the DDR memory FIFO and filling the pipeline to get-bit
//                              Set cntl_empty_en = cntl_fill_en = 0 when pulsing cntl_init
// bit  [1]     cntl_fill_en    Set to 1 to enable reading data from DDR memory
// bit  [0]     cntl_init:      After setting the read pointers, sizes, channel masks
//                              and read masks, set this bit to 1 and then to 0
//                              NOTE:  You don't need to pulse cntl_init if only the start address is
//                              being changed
#define AIU_MEM_AIFIFO2_CONTROL                    ((0x146e  << 2) + 0xffd00000)
// --------------------------------------------
// AIFIFO2 Buffer Level Manager
// --------------------------------------------
#define AIU_MEM_AIFIFO2_MAN_WP                     ((0x146f  << 2) + 0xffd00000)
#define AIU_MEM_AIFIFO2_MAN_RP                     ((0x1470  << 2) + 0xffd00000)
#define AIU_MEM_AIFIFO2_LEVEL                      ((0x1471  << 2) + 0xffd00000)
//
// bit  [1]     manual mode     Set to 1 for manual write pointer mode
// bit  [0]     Init            Set high then low after everything has been initialized
#define AIU_MEM_AIFIFO2_BUF_CNTL                   ((0x1472  << 2) + 0xffd00000)
// --------------------------------------------
// I2S Buffer Level Manager
// --------------------------------------------
#define AIU_MEM_I2S_MAN_WP                         ((0x1473  << 2) + 0xffd00000)
#define AIU_MEM_I2S_MAN_RP                         ((0x1474  << 2) + 0xffd00000)
#define AIU_MEM_I2S_LEVEL                          ((0x1475  << 2) + 0xffd00000)
//
// bit  [1]     mode            0 = parser (or audin_fifo0 or audin_fifo1),
//                              1 for manual write pointer
// bit  [0]     Init            Set high then low after everything has been initialized
#define AIU_MEM_I2S_BUF_CNTL                       ((0x1476  << 2) + 0xffd00000)
#define AIU_MEM_I2S_BUF_WRAP_COUNT                 ((0x1477  << 2) + 0xffd00000)
// bit 29:24 A_brst_num
// bit 21:16 A_id
// bit 15:0 level_hold
#define AIU_MEM_I2S_MEM_CTL                        ((0x1478  << 2) + 0xffd00000)
//-----------------------------------------------------------------------------
// Additional IEC958 registers (new feature)
//-----------------------------------------------------------------------------
// bit 29:24 A_brst_num
// bit 21:16 A_id
// bit 15:0 level_hold
#define AIU_MEM_IEC958_MEM_CTL                     ((0x1479  << 2) + 0xffd00000)
#define AIU_MEM_IEC958_WRAP_COUNT                  ((0x147a  << 2) + 0xffd00000)
#define AIU_MEM_IEC958_IRQ_LEVEL                   ((0x147b  << 2) + 0xffd00000)
#define AIU_MEM_IEC958_MAN_WP                      ((0x147c  << 2) + 0xffd00000)
#define AIU_MEM_IEC958_MAN_RP                      ((0x147d  << 2) + 0xffd00000)
#define AIU_MEM_IEC958_LEVEL                       ((0x147e  << 2) + 0xffd00000)
#define AIU_MEM_IEC958_BUF_CNTL                    ((0x147f  << 2) + 0xffd00000)
//-----------------------------------------------------------------------------
// add for AIFIFO channel (old $cdrom/rtl/cdr_top/getbit)
//-----------------------------------------------------------------------------
// Bit 3 	CRC pop aififo enable
// Bit 2		writing to this bit to 1 causes CRC module reset
// Bit 1		enable aififo
// Bit 0		writing to this bit to 1 causes aififo soft reset
#define AIU_AIFIFO_CTRL                            ((0x1480  << 2) + 0xffd00000)
//'h0000
// AIFIFO status register
// Bit 13		//aififo request to dcu status
// Bit 12		//dcu select status
// Bit 11:5		//aififo word counter number
// Bit 4:0		//how many bits left in the first pop register
#define AIU_AIFIFO_STATUS                          ((0x1481  << 2) + 0xffd00000)
// Same fucntion as the AIGBIT of AIFIFO in CDROM module
// write to this register how many bits wanna pop,
// and reading this register gets the corresponding bits data
#define AIU_AIFIFO_GBIT                            ((0x1482  << 2) + 0xffd00000)
// Same function as the AICLB of AIFIFO in CDROM module
// return the leading zeros by reading this registers
#define AIU_AIFIFO_CLB                             ((0x1483  << 2) + 0xffd00000)
// --------------------------------------------
// AIFIFO DDR Interface
// --------------------------------------------
// The AIFIFO start pointer into DDR memory is a 32-bit number
// The Start pointer will automatically be truncated to land on
// an 8-byte boundary.  That is, bits [2:0] = 0;
#define AIU_MEM_AIFIFO_START_PTR                   ((0x1484  << 2) + 0xffd00000)
// The current pointer points so some location between the START and END
// pointers.  The current pointer is a BYTE pointer.  That is, you can
// point to any BYTE address within the START/END range
#define AIU_MEM_AIFIFO_CURR_PTR                    ((0x1485  << 2) + 0xffd00000)
#define AIU_MEM_AIFIFO_END_PTR                     ((0x1486  << 2) + 0xffd00000)
#define AIU_MEM_AIFIFO_BYTES_AVAIL                 ((0x1487  << 2) + 0xffd00000)
// AIFIFO FIFO Control
// bit  [15:11] unused
// bit  [10]    use_level       Set this bit to 1 to enable filling of the FIFO controlled by the buffer
//                              level control.  If this bit is 0, then use bit[1] to control the enabling of filling
// bit  [9]     Data Ready.     This bit is set when data can be popped
// bit  [8]     fill busy       This bit will be high when we're fetching data from the DDR memory
//                              To reset this module, set cntl_enable = 0, and then wait for busy = 0.
//                              After that you can pulse cntl_init to start over
// bit  [7]     cntl_endian_jic Just in case endian.  last minute byte swap of the data out of
//                              the FIFO to getbit
// bit  [6]     unused
// bits [5:3]   endian:         see $lib/rtl/ddr_endian.v
// bit  [2]     cntl_empty_en   Set to 1 to enable reading the DDR memory FIFO and filling the pipeline to get-bit
//                              Set cntl_empty_en = cntl_fill_en = 0 when pulsing cntl_init
// bit  [1]     cntl_fill_en    Set to 1 to enable reading data from DDR memory
// bit  [0]     cntl_init:      After setting the read pointers, sizes, channel masks
//                              and read masks, set this bit to 1 and then to 0
//                              NOTE:  You don't need to pulse cntl_init if only the start address is
//                              being changed
#define AIU_MEM_AIFIFO_CONTROL                     ((0x1488  << 2) + 0xffd00000)
// --------------------------------------------
// AIFIFO Buffer Level Manager
// --------------------------------------------
#define AIU_MEM_AIFIFO_MAN_WP                      ((0x1489  << 2) + 0xffd00000)
#define AIU_MEM_AIFIFO_MAN_RP                      ((0x148a  << 2) + 0xffd00000)
#define AIU_MEM_AIFIFO_LEVEL                       ((0x148b  << 2) + 0xffd00000)
//
// bit  [1]     manual mode     Set to 1 for manual write pointer mode
// bit  [0]     Init            Set high then low after everything has been initialized
#define AIU_MEM_AIFIFO_BUF_CNTL                    ((0x148c  << 2) + 0xffd00000)
#define AIU_MEM_AIFIFO_BUF_WRAP_COUNT              ((0x148d  << 2) + 0xffd00000)
#define AIU_MEM_AIFIFO2_BUF_WRAP_COUNT             ((0x148e  << 2) + 0xffd00000)
// bit 29:24 A_brst_num
// bit 21:16 A_id
// bit 15:0 level_hold
#define AIU_MEM_AIFIFO_MEM_CTL                     ((0x148f  << 2) + 0xffd00000)
// bit 31:16 -- drop_bytes
// bit 15:14 -- drop_status (Read-Only)
// bit 13:12 -- sync_match_position (Read-Only)
// bit 11:6 -- reserved
// bit 5:4 -- TIME_STAMP_NUMBER, 0-32bits, 1-64bits, 2-96bits, 3-128bits
// bit 3 -- stamp_soft_reset
// bit 2 -- TIME_STAMP_length_enable
// bit 1 -- TIME_STAMP_sync64_enable
// bit 0 -- TIME_STAMP_enable
#define AIFIFO_TIME_STAMP_CNTL                     ((0x1490  << 2) + 0xffd00000)
// bit 31:0 -- TIME_STAMP_SYNC_CODE_0
#define AIFIFO_TIME_STAMP_SYNC_0                   ((0x1491  << 2) + 0xffd00000)
// bit 31:0 -- TIME_STAMP_SYNC_CODE_1
#define AIFIFO_TIME_STAMP_SYNC_1                   ((0x1492  << 2) + 0xffd00000)
// bit 31:0 TIME_STAMP_0
#define AIFIFO_TIME_STAMP_0                        ((0x1493  << 2) + 0xffd00000)
// bit 31:0 TIME_STAMP_1
#define AIFIFO_TIME_STAMP_1                        ((0x1494  << 2) + 0xffd00000)
// bit 31:0 TIME_STAMP_2
#define AIFIFO_TIME_STAMP_2                        ((0x1495  << 2) + 0xffd00000)
// bit 31:0 TIME_STAMP_3
#define AIFIFO_TIME_STAMP_3                        ((0x1496  << 2) + 0xffd00000)
// bit 31:0 TIME_STAMP_LENGTH
#define AIFIFO_TIME_STAMP_LENGTH                   ((0x1497  << 2) + 0xffd00000)
// bit 31:16 -- drop_bytes
// bit 15:14 -- drop_status (Read-Only)
// bit 13:12 -- sync_match_position (Read-Only)
// bit 11:6 -- reserved
// bit 5:4 -- TIME_STAMP_NUMBER, 0-32bits, 1-64bits, 2-96bits, 3-128bits
// bit 3 -- stamp_soft_reset
// bit 2 -- TIME_STAMP_length_enable
// bit 1 -- TIME_STAMP_sync64_enable
// bit 0 -- TIME_STAMP_enable
#define AIFIFO2_TIME_STAMP_CNTL                    ((0x1498  << 2) + 0xffd00000)
// bit 31:0 -- TIME_STAMP_SYNC_CODE_0
#define AIFIFO2_TIME_STAMP_SYNC_0                  ((0x1499  << 2) + 0xffd00000)
// bit 31:0 -- TIME_STAMP_SYNC_CODE_1
#define AIFIFO2_TIME_STAMP_SYNC_1                  ((0x149a  << 2) + 0xffd00000)
// bit 31:0 TIME_STAMP_0
#define AIFIFO2_TIME_STAMP_0                       ((0x149b  << 2) + 0xffd00000)
// bit 31:0 TIME_STAMP_1
#define AIFIFO2_TIME_STAMP_1                       ((0x149c  << 2) + 0xffd00000)
// bit 31:0 TIME_STAMP_2
#define AIFIFO2_TIME_STAMP_2                       ((0x149d  << 2) + 0xffd00000)
// bit 31:0 TIME_STAMP_3
#define AIFIFO2_TIME_STAMP_3                       ((0x149e  << 2) + 0xffd00000)
// bit 31:0 TIME_STAMP_LENGTH
#define AIFIFO2_TIME_STAMP_LENGTH                  ((0x149f  << 2) + 0xffd00000)
// bit 31:16 -- drop_bytes
// bit 15:14 -- drop_status (Read-Only)
// bit 13:12 -- sync_match_position (Read-Only)
// bit 11:6 -- reserved
// bit 5:4 -- TIME_STAMP_NUMBER, 0-32bits, 1-64bits, 2-96bits, 3-128bits
// bit 3 -- stamp_soft_reset
// bit 2 -- TIME_STAMP_length_enable
// bit 1 -- TIME_STAMP_sync64_enable
// bit 0 -- TIME_STAMP_enable
#define IEC958_TIME_STAMP_CNTL                     ((0x14a0  << 2) + 0xffd00000)
// bit 31:0 -- TIME_STAMP_SYNC_CODE_0
#define IEC958_TIME_STAMP_SYNC_0                   ((0x14a1  << 2) + 0xffd00000)
// bit 31:0 -- TIME_STAMP_SYNC_CODE_1
#define IEC958_TIME_STAMP_SYNC_1                   ((0x14a2  << 2) + 0xffd00000)
// bit 31:0 TIME_STAMP_0
#define IEC958_TIME_STAMP_0                        ((0x14a3  << 2) + 0xffd00000)
// bit 31:0 TIME_STAMP_1
#define IEC958_TIME_STAMP_1                        ((0x14a4  << 2) + 0xffd00000)
// bit 31:0 TIME_STAMP_2
#define IEC958_TIME_STAMP_2                        ((0x14a5  << 2) + 0xffd00000)
// bit 31:0 TIME_STAMP_3
#define IEC958_TIME_STAMP_3                        ((0x14a6  << 2) + 0xffd00000)
// bit 31:0 TIME_STAMP_LENGTH
#define IEC958_TIME_STAMP_LENGTH                   ((0x14a7  << 2) + 0xffd00000)
// bit 29:24 A_brst_num
// bit 21:16 A_id
// bit 15:0 level_hold
#define AIU_MEM_AIFIFO2_MEM_CTL                    ((0x14a8  << 2) + 0xffd00000)
// --------------------------------------------
// CBUS_DDR interface for I2S_FAST
// --------------------------------------------
// bit[31:26] unused
// bit[25]      A_req       level
// bit[24]      data_req    If this bit is 1, then (a_req_cnt != 'h0)
// bit[23:16]   a_req_cnt   This value corresponds to the number of 32-bit words
//                          requested by the i2s_fast() module
// bit[15:7]    unused
// bit[6]                   Set this bit to mux in the cbus_ddr_interface
// bit[5]                   Set this bit to allow back to back A_req's to be serviced
// bit[4]                   Set this bit to generate an IRQ on the first A_req
//                          If this bit is 0, then an IRQ is generated after all requests
//                          are completed and how many 32-bit words to send is calculated.
// bit[3:1]                 Endian
// bit[0]                   Set this bit enable the cbus_ddr_interface
#define AIU_I2S_CBUS_DDR_CNTL                      ((0x14a9  << 2) + 0xffd00000)
// 32-bit data to write to the cbus_ddr interface
#define AIU_I2S_CBUS_DDR_WDATA                     ((0x14aa  << 2) + 0xffd00000)
// First address associated with the first request by the i2s_fast() to read DDR data
#define AIU_I2S_CBUS_DDR_ADDR                      ((0x14ab  << 2) + 0xffd00000)
//
// Closing file:  aregs.h
//
//========================================================================
//  CDROM Interface                                 (12'h600 - 12'h6ff)
//
//========================================================================
//========================================================================
//	registers for ge2d (12'h8a0 - 12'h8ff)
//========================================================================
////`include "ge2d_regs.h" //  not in cbus domain any more, it is located in vapb3 bus now
//========================================================================
//  DSP Co-Processor Registers			    ( 8'he00 - 12'hfff)
//
//========================================================================
// Duplicate Address:  When actually used
// please move to a different address
// `define AUDIO_COP_CTL1      12'hf00  // r & w; r-> 6'h00,bsmod[2:0],acmod[2:0],lfeon,nfchans[2:0]
//
// Incorrect format....should be 8'bits only
//
// Removed by Chris Maslyar       `define AUDIO_COP_CTL2      12'hf01  // r & w; r-> frame_size[12:0],dsurmod[1:0]
// Removed by Chris Maslyar
// Removed by Chris Maslyar       //  f02 -f0d are special regs , not in ac3_reg.h, but used by CPU for AC3 operations
// Removed by Chris Maslyar
// Removed by Chris Maslyar       `define OPERAND_M_CTL       12'hf02
// Removed by Chris Maslyar       `define OPERAND1_ADDR       12'hf03
// Removed by Chris Maslyar       `define OPERAND2_ADDR       12'hf04
// Removed by Chris Maslyar       `define RESULT_M_CTL        12'hf05
// Removed by Chris Maslyar       `define RESULT1_ADDR        12'hf06
// Removed by Chris Maslyar       `define RESULT2_ADDR        12'hf07
// Removed by Chris Maslyar       `define ADD_SHFT_CTL        12'hf08
// Removed by Chris Maslyar       `define OPERAND_ONE_H       12'hf09
// Removed by Chris Maslyar       `define OPERAND_ONE_L       12'hf0a
// Removed by Chris Maslyar       `define OPERAND_TWO_H       12'hf0b
// Removed by Chris Maslyar       `define OPERAND_TWO_L       12'hf0c
// Removed by Chris Maslyar       `define RESULT_H            12'hf0d
// Removed by Chris Maslyar
// Removed by Chris Maslyar
// Removed by Chris Maslyar       `define RESULT_M            12'hf0e   // r & w; ac3_reg_14
// Removed by Chris Maslyar
// Removed by Chris Maslyar       // special reg
// Removed by Chris Maslyar       `define RESULT_L            12'hf0f
// Removed by Chris Maslyar
// Removed by Chris Maslyar       //
// Removed by Chris Maslyar       `define WMEM_R_PTR          12'hf10   // r & w ; endmant0 &1
// Removed by Chris Maslyar
// Removed by Chris Maslyar       `define WMEM_W_PTR          12'hf11
// Removed by Chris Maslyar       `define AUDIO_LAYER         12'hf20
// Removed by Chris Maslyar       `define AC3_DECODING        12'hf21
// Removed by Chris Maslyar       `define AC3_DYNAMIC         12'hf22
// Removed by Chris Maslyar       `define AC3_MELODY          12'hf23
// Removed by Chris Maslyar       `define AC3_VOCAL           12'hf24
//======================================
//  CPU Assist module
//
//======================================
// -----------------------------------------------
// CBUS_BASE:  ASSIST_CBUS_BASE = 0x20
// -----------------------------------------------
//`define ASSIST_AMR_MBOX1_INT          8'h4d
//`define ASSIST_AMR_MBOX2_INT          8'h4e
#define ASSIST_AMR_SCRATCH0                        ((0x204f  << 2) + 0xffd00000)
#define ASSIST_AMR_SCRATCH1                        ((0x2050  << 2) + 0xffd00000)
#define ASSIST_AMR_SCRATCH2                        ((0x2051  << 2) + 0xffd00000)
#define ASSIST_AMR_SCRATCH3                        ((0x2052  << 2) + 0xffd00000)
#define ASSIST_HW_REV                              ((0x2053  << 2) + 0xffd00000)
//`define ASSIST_CBUS_ARB               8'h54
#define ASSIST_POR_CONFIG                          ((0x2055  << 2) + 0xffd00000)
#define ASSIST_SPARE16_REG1                        ((0x2056  << 2) + 0xffd00000)
#define ASSIST_SPARE16_REG2                        ((0x2057  << 2) + 0xffd00000)
#define ASSIST_SPARE8_REG1                         ((0x2058  << 2) + 0xffd00000)
#define ASSIST_SPARE8_REG2                         ((0x2059  << 2) + 0xffd00000)
// Duplicate Address...when used please move to a new address
// `define TO_AMRISC_REG                 8'h59 // for amrisc
#define ASSIST_SPARE8_REG3                         ((0x205a  << 2) + 0xffd00000)
// Duplicate Address...when used please move to a new address
// `define FROM_AMRISC_REG               8'h5a // for amrisc
// Duplicate Address...when used please move to a new address
// `define MPEG2_DECODER_CONTROL         8'h5b // for amrisc
#define AC3_CTRL_REG1                              ((0x205b  << 2) + 0xffd00000)
#define AC3_CTRL_REG2                              ((0x205c  << 2) + 0xffd00000)
#define AC3_CTRL_REG3                              ((0x205d  << 2) + 0xffd00000)
#define AC3_CTRL_REG4                              ((0x205e  << 2) + 0xffd00000)
//`define ASSIST_PMEM_SPLIT             8'h5f
#define ASSIST_GEN_CNTL                            ((0x2068  << 2) + 0xffd00000)
#define EE_ASSIST_MBOX0_IRQ_REG                    ((0x2070  << 2) + 0xffd00000)
#define EE_ASSIST_MBOX0_CLR_REG                    ((0x2071  << 2) + 0xffd00000)
#define EE_ASSIST_MBOX0_MASK                       ((0x2072  << 2) + 0xffd00000)
#define EE_ASSIST_MBOX0_FIQ_SEL                    ((0x2073  << 2) + 0xffd00000)
#define EE_ASSIST_MBOX1_IRQ_REG                    ((0x2074  << 2) + 0xffd00000)
#define EE_ASSIST_MBOX1_CLR_REG                    ((0x2075  << 2) + 0xffd00000)
#define EE_ASSIST_MBOX1_MASK                       ((0x2076  << 2) + 0xffd00000)
#define EE_ASSIST_MBOX1_FIQ_SEL                    ((0x2077  << 2) + 0xffd00000)
#define EE_ASSIST_MBOX2_IRQ_REG                    ((0x2078  << 2) + 0xffd00000)
#define EE_ASSIST_MBOX2_CLR_REG                    ((0x2079  << 2) + 0xffd00000)
#define EE_ASSIST_MBOX2_MASK                       ((0x207a  << 2) + 0xffd00000)
#define EE_ASSIST_MBOX2_FIQ_SEL                    ((0x207b  << 2) + 0xffd00000)
#define EE_ASSIST_MBOX3_IRQ_REG                    ((0x207c  << 2) + 0xffd00000)
#define EE_ASSIST_MBOX3_CLR_REG                    ((0x207d  << 2) + 0xffd00000)
#define EE_ASSIST_MBOX3_MASK                       ((0x207e  << 2) + 0xffd00000)
#define EE_ASSIST_MBOX3_FIQ_SEL                    ((0x207f  << 2) + 0xffd00000)
// -----------------------------------------------
// CBUS_BASE:  AUD_CBUS_BASE = 0x34
// -----------------------------------------------
// ----------------------------
// AUDIN (64)
// ----------------------------
#define AUDIN_SPDIF_MODE                           ((0x3400  << 2) + 0xffd00000)
    #define SPDIF_EN                31
    #define SPDIF_INT_EN            30
    #define SPDIF_BURST_PRE_INT_EN  29
    #define SPDIF_TIE_0             24
    #define SPDIF_SAMPLE_SEL        23
    #define SPDIF_REVERSE_EN        22
    #define SPDIF_BIT_ORDER         20
    #define SPDIF_CHNL_ORDER        19
    #define SPDIF_DATA_TYPE_SEL     18
    #define SPDIF_XTDCLK_UPD_ITVL   14   //16:14
    #define SPDIF_CLKNUM_54U        0     //13:0
#define AUDIN_SPDIF_FS_CLK_RLTN                    ((0x3401  << 2) + 0xffd00000)
    #define SPDIF_CLKNUM_192K  24     //29:24
    #define SPDIF_CLKNUM_96K   18     //23:18
    #define SPDIF_CLKNUM_48K   12     //17:12
    #define SPDIF_CLKNUM_44K   6     // 11:6
    #define SPDIF_CLKNUM_32K   0     // 5:0
#define AUDIN_SPDIF_CHNL_STS_A                     ((0x3402  << 2) + 0xffd00000)
#define AUDIN_SPDIF_CHNL_STS_B                     ((0x3403  << 2) + 0xffd00000)
#define AUDIN_SPDIF_MISC                           ((0x3404  << 2) + 0xffd00000)
#define AUDIN_SPDIF_NPCM_PCPD                      ((0x3405  << 2) + 0xffd00000)
#define AUDIN_SPDIF_END                            ((0x340f  << 2) + 0xffd00000)
#define AUDIN_I2SIN_CTRL                           ((0x3410  << 2) + 0xffd00000)
    #define I2SIN_DIR       0    // I2S CLK and LRCLK direction. 0 : input 1 : output.
    #define I2SIN_CLK_SEL    1    // I2S clk selection : 0 : from pad input. 1 : from AIU.
    #define I2SIN_LRCLK_SEL 2
    #define I2SIN_POS_SYNC  3
    #define I2SIN_LRCLK_SKEW 4    // 6:4
    #define I2SIN_LRCLK_INVT 7
    #define I2SIN_SIZE       8    //9:8 : 0 16 bit. 1 : 18 bits 2 : 20 bits 3 : 24bits.
    #define I2SIN_CHAN_EN   10    //13:10.
    #define I2SIN_EN        15
// Bit 31:15    Rsrv.
// Bit 14:12 RW HDMI-RX SPDIF channel status select to report on AUDIN_DECODE_CHANNEL_STATUS_A_*: 0=select channel 1; 1=channel 2; ...; 7=channel 8.
// Bit 11: 8 RW HDMI-RX SPDIF channel status extraction enable, 1-bit per channel pair. To enable, SPDIF input source also must select 1.
// Bit  7: 6    Rsrv.
// Bit  5: 4 RW SPDIF input source select. 0=Default, select chip external; 1=select HDMI RX output; 2/3=Rsrv.
// Bit  3: 2    Rsrv.
// Bit  1: 0 RW I2S input source select. 0=Default, select chip external; 1=select audio codec output; 2=select HDMI RX output; 3=Rsrv.
#define AUDIN_SOURCE_SEL                           ((0x3411  << 2) + 0xffd00000)
// The following registers control the new alternative decoder -- hdmi_tx_audio_decoder, in audin module
// Bit 31:25    Rsrv.
// Bit    24 RW SPDIF enable.
// Bit 23:22    Rsrv.
// Bit 21:20 RW i2s_block_start_src: 0=left channel 0 is approved as block start generator, ..., 3=left channel 3 is the block start generator.
// Bit 19:17    Rsrv.
// Bit    16 RW I2S enable.
// Bit 15: 8 RW audio_channel_alloc: Usage indication of up to 8 channels. If the correspoinding bit is 1, then this channel is used.
//                                   E.g.: In 2-channel audio, it is 00000011
// Bit     7 RW hdmi_tx_audio_decoder input sel: 0=SPDIF; 1=I2S.
// Bit     6 RW i2s_channel_config: 0=2-channel; 1=8-channel.
// Bit  5: 4 RW i2s_format_select: 0=left-justify; 1=right-justify; 2=I2S format; 3=DSP format.
// Bit  3: 2 RW i2s_bit_width: 0=16-bit; 1=18-bit; 2=20-bit; 3=24-bit.
// Bit     1 RW ws polarity: 0=0 is left, 1 is right; 1=1 is left, 0 is right.
// Bit     0 RW For SPDIF mode, 0=use channel status from input data; 1=use channel status from registers;
//              For I2S mode, 0=one-bit audio; 1=I2S.
#define AUDIN_DECODE_FORMAT                        ((0x3412  << 2) + 0xffd00000)
// Bit 31:25    Rsrv.
// Bit    24 R  channel_status stablility indicator.
// Bit 23:16 RW Valid bits for audio sample packet. [7] for valid_sp3_right, [6] for valid_sp3_left, ..., [1] for valid_sp0_right, [0] for valid_sp0_left.
// Bit 15: 8 RW User bits for audio sample packet. [7] for user_sp3_right, [6] for user_sp3_left, ..., [1] for user_sp0_right, [0] for user_sp0_left.
// Bit  7: 4 RW cntl_init_discard: Number of initial hdmi_tx_audio_decoder samples to discard from reset.
// Bit     3 RW cntl_invert_i2s_lrclk: Invert WS before input to hdmi_tx_audio_decoder.
// Bit     2 RW audio_valid_overwrite: Valid bit selection in audio packet. 0=use input data; 1=use
// Bit     1 RW audio_user_overwrite: User bit selection in audio packet. 0=use input data; 1=use
// Bit     0 RW audio_sample_valid: sample non-flat indication. 0=flat, non-valid; 1=non-flat, valid.
#define AUDIN_DECODE_CONTROL_STATUS                ((0x3413  << 2) + 0xffd00000)
// IEC958 192-bit channel status: muxed between 8 channels, channel selection by AUDIN_SOURCE_SEL[14:12]
#define AUDIN_DECODE_CHANNEL_STATUS_A_0            ((0x3414  << 2) + 0xffd00000)
#define AUDIN_DECODE_CHANNEL_STATUS_A_1            ((0x3415  << 2) + 0xffd00000)
#define AUDIN_DECODE_CHANNEL_STATUS_A_2            ((0x3416  << 2) + 0xffd00000)
#define AUDIN_DECODE_CHANNEL_STATUS_A_3            ((0x3417  << 2) + 0xffd00000)
#define AUDIN_DECODE_CHANNEL_STATUS_A_4            ((0x3418  << 2) + 0xffd00000)
#define AUDIN_DECODE_CHANNEL_STATUS_A_5            ((0x3419  << 2) + 0xffd00000)
#define AUDIN_FIFO0_START                          ((0x3420  << 2) + 0xffd00000)
#define AUDIN_FIFO0_END                            ((0x3421  << 2) + 0xffd00000)
#define AUDIN_FIFO0_PTR                            ((0x3422  << 2) + 0xffd00000)
#define AUDIN_FIFO0_INTR                           ((0x3423  << 2) + 0xffd00000)
#define AUDIN_FIFO0_RDPTR                          ((0x3424  << 2) + 0xffd00000)
#define AUDIN_FIFO0_CTRL                           ((0x3425  << 2) + 0xffd00000)
    #define AUDIN_FIFO0_EN       0
    #define AUDIN_FIFO0_RST      1
    #define AUDIN_FIFO0_LOAD     2    //write 1 to load address to AUDIN_FIFO0.

    #define AUDIN_FIFO0_DIN_SEL  3
            // 0     spdifIN
            // 1     i2Sin
            // 2     PCMIN
            // 3     HDMI in
            // 4     DEMODULATOR IN
    #define AUDIN_FIFO0_ENDIAN   8    //10:8   data endian control.
    #define AUDIN_FIFO0_CHAN     11    //14:11   channel number.  in M1 suppose there's only 1 channel and 2 channel.
    #define AUDIN_FIFO0_UG       15    // urgent request enable.
    #define AUDIN_FIFO0_HOLD0_EN  19
    #define AUDIN_FIFO0_HOLD1_EN  20
    #define AUDIN_FIFO0_HOLD2_EN  21
    #define AUDIN_FIFO0_HOLD0_SEL 22   // 23:22
    #define AUDIN_FIFO0_HOLD1_SEL 24   // 25:24
    #define AUDIN_FIFO0_HOLD2_SEL 26   // 27:26
    #define AUDIN_FIFO0_HOLD_LVL  28   // 27:26


#define AUDIN_FIFO0_CTRL1                          ((0x3426  << 2) + 0xffd00000)
#define AUDIN_FIFO0_LVL0                           ((0x3427  << 2) + 0xffd00000)
#define AUDIN_FIFO0_LVL1                           ((0x3428  << 2) + 0xffd00000)
#define AUDIN_FIFO0_LVL2                           ((0x3429  << 2) + 0xffd00000)
#define AUDIN_FIFO0_REQID                          ((0x3430  << 2) + 0xffd00000)
#define AUDIN_FIFO0_WRAP                           ((0x3431  << 2) + 0xffd00000)
#define AUDIN_FIFO1_START                          ((0x3433  << 2) + 0xffd00000)
#define AUDIN_FIFO1_END                            ((0x3434  << 2) + 0xffd00000)
#define AUDIN_FIFO1_PTR                            ((0x3435  << 2) + 0xffd00000)
#define AUDIN_FIFO1_INTR                           ((0x3436  << 2) + 0xffd00000)
#define AUDIN_FIFO1_RDPTR                          ((0x3437  << 2) + 0xffd00000)
#define AUDIN_FIFO1_CTRL                           ((0x3438  << 2) + 0xffd00000)
    #define AUDIN_FIFO1_EN       0
    #define AUDIN_FIFO1_RST      1
    #define AUDIN_FIFO1_LOAD     2    //write 1 to load address to AUDIN_FIFO0.

    #define AUDIN_FIFO1_DIN_SEL  3
            // 0     spdifIN
            // 1     i2Sin
            // 2     PCMIN
            // 3     HDMI in
            // 4     DEMODULATOR IN
    #define AUDIN_FIFO1_ENDIAN   8    //10:8   data endian control.
    #define AUDIN_FIFO1_CHAN     11    //14:11   channel number.  in M1 suppose there's only 1 channel and 2 channel.
    #define AUDIN_FIFO1_UG       15    // urgent request enable.
    #define AUDIN_FIFO1_HOLD0_EN  19
    #define AUDIN_FIFO1_HOLD1_EN  20
    #define AUDIN_FIFO1_HOLD2_EN  21
    #define AUDIN_FIFO1_HOLD0_SEL 22   // 23:22
    #define AUDIN_FIFO1_HOLD1_SEL 24   // 25:24
    #define AUDIN_FIFO1_HOLD2_SEL 26   // 27:26
    #define AUDIN_FIFO1_HOLD_LVL  28   // 27:26
#define AUDIN_FIFO1_CTRL1                          ((0x3439  << 2) + 0xffd00000)
#define AUDIN_FIFO1_LVL0                           ((0x3440  << 2) + 0xffd00000)
#define AUDIN_FIFO1_LVL1                           ((0x3441  << 2) + 0xffd00000)
#define AUDIN_FIFO1_LVL2                           ((0x3442  << 2) + 0xffd00000)
#define AUDIN_FIFO1_REQID                          ((0x3443  << 2) + 0xffd00000)
#define AUDIN_FIFO1_WRAP                           ((0x3444  << 2) + 0xffd00000)
#define AUDIN_FIFO2_START                          ((0x3445  << 2) + 0xffd00000)
#define AUDIN_FIFO2_END                            ((0x3446  << 2) + 0xffd00000)
#define AUDIN_FIFO2_PTR                            ((0x3447  << 2) + 0xffd00000)
#define AUDIN_FIFO2_INTR                           ((0x3448  << 2) + 0xffd00000)
#define AUDIN_FIFO2_RDPTR                          ((0x3449  << 2) + 0xffd00000)
#define AUDIN_FIFO2_CTRL                           ((0x344a  << 2) + 0xffd00000)
#define AUDIN_FIFO2_CTRL1                          ((0x344b  << 2) + 0xffd00000)
#define AUDIN_FIFO2_LVL0                           ((0x344c  << 2) + 0xffd00000)
#define AUDIN_FIFO2_LVL1                           ((0x344d  << 2) + 0xffd00000)
#define AUDIN_FIFO2_LVL2                           ((0x344e  << 2) + 0xffd00000)
#define AUDIN_FIFO2_REQID                          ((0x344f  << 2) + 0xffd00000)
#define AUDIN_FIFO2_WRAP                           ((0x3450  << 2) + 0xffd00000)
#define AUDIN_INT_CTRL                             ((0x3451  << 2) + 0xffd00000)
#define AUDIN_FIFO_INT                             ((0x3452  << 2) + 0xffd00000)
#define PCMIN_CTRL0                                ((0x3460  << 2) + 0xffd00000)
#define PCMIN_CTRL1                                ((0x3461  << 2) + 0xffd00000)
#define PCMIN_CTRL2                                ((0x3462  << 2) + 0xffd00000)
//`define PCMIN1_CTRL0                     8'h62
//`define PCMIN1_CTRL1                     8'h63
#define PCMOUT_CTRL0                               ((0x3470  << 2) + 0xffd00000)
#define PCMOUT_CTRL1                               ((0x3471  << 2) + 0xffd00000)
#define PCMOUT_CTRL2                               ((0x3472  << 2) + 0xffd00000)
#define PCMOUT_CTRL3                               ((0x3473  << 2) + 0xffd00000)
#define PCMOUT_CTRL4                               ((0x3474  << 2) + 0xffd00000)
//`define PCMOUT1_CTRL0                    8'h74
//`define PCMOUT1_CTRL1                    8'h75
//`define PCMOUT1_CTRL2                    8'h76
//`define PCMOUT1_CTRL3                    8'h77
#define AUDOUT_CTRL                                ((0x3480  << 2) + 0xffd00000)
#define AUDOUT_CTRL1                               ((0x3481  << 2) + 0xffd00000)
#define AUDOUT_BUF0_STA                            ((0x3482  << 2) + 0xffd00000)
#define AUDOUT_BUF0_EDA                            ((0x3483  << 2) + 0xffd00000)
#define AUDOUT_BUF0_WPTR                           ((0x3484  << 2) + 0xffd00000)
#define AUDOUT_BUF1_STA                            ((0x3485  << 2) + 0xffd00000)
#define AUDOUT_BUF1_EDA                            ((0x3486  << 2) + 0xffd00000)
#define AUDOUT_BUF1_WPTR                           ((0x3487  << 2) + 0xffd00000)
#define AUDOUT_FIFO_RPTR                           ((0x3488  << 2) + 0xffd00000)
#define AUDOUT_INTR_PTR                            ((0x3489  << 2) + 0xffd00000)
#define AUDOUT_FIFO_STS                            ((0x348a  << 2) + 0xffd00000)
//`define AUDOUT1_CTRL                     8'h90
//`define AUDOUT1_CTRL1                    8'h91
//`define AUDOUT1_BUF0_STA                 8'h92
//`define AUDOUT1_BUF0_EDA                 8'h93
//`define AUDOUT1_BUF0_WPTR                8'h94
//`define AUDOUT1_BUF1_STA                 8'h95
//`define AUDOUT1_BUF1_EDA                 8'h96
//`define AUDOUT1_BUF1_WPTR                8'h97
//`define AUDOUT1_FIFO_RPTR                8'h98
//`define AUDOUT1_INTR_PTR                 8'h99
//`define AUDOUT1_FIFO_STS                 8'h9a
//// Bit 31: 0 RW cntl_mute_val: Use this value during mute, if cntl_mute_mode=2.
//`define AUDIN_MUTE_VAL                 8'h35
#define AUDIN_HDMI_MEAS_CTRL                       ((0x34a0  << 2) + 0xffd00000)
#define AUDIN_HDMI_MEAS_CYCLES_M1                  ((0x34a1  << 2) + 0xffd00000)
#define AUDIN_HDMI_MEAS_INTR_MASKN                 ((0x34a2  << 2) + 0xffd00000)
#define AUDIN_HDMI_MEAS_INTR_STAT                  ((0x34a3  << 2) + 0xffd00000)
#define AUDIN_HDMI_REF_CYCLES_STAT_0               ((0x34a4  << 2) + 0xffd00000)
#define AUDIN_HDMI_REF_CYCLES_STAT_1               ((0x34a5  << 2) + 0xffd00000)
#define AUDIN_HDMIRX_AFIFO_STAT                    ((0x34a6  << 2) + 0xffd00000)
#define AUDIN_MEM_PD                               ((0x34aa  << 2) + 0xffd00000)
#define AUDIN_FIFO0_PIO_STS                        ((0x34b0  << 2) + 0xffd00000)
#define AUDIN_FIFO0_PIO_RDL                        ((0x34b1  << 2) + 0xffd00000)
#define AUDIN_FIFO0_PIO_RDH                        ((0x34b2  << 2) + 0xffd00000)
#define AUDIN_FIFO1_PIO_STS                        ((0x34b3  << 2) + 0xffd00000)
#define AUDIN_FIFO1_PIO_RDL                        ((0x34b4  << 2) + 0xffd00000)
#define AUDIN_FIFO1_PIO_RDH                        ((0x34b5  << 2) + 0xffd00000)
#define AUDIN_FIFO2_PIO_STS                        ((0x34b6  << 2) + 0xffd00000)
#define AUDIN_FIFO2_PIO_RDL                        ((0x34b7  << 2) + 0xffd00000)
#define AUDIN_FIFO2_PIO_RDH                        ((0x34b8  << 2) + 0xffd00000)
#define AUDOUT_FIFO_PIO_STS                        ((0x34b9  << 2) + 0xffd00000)
#define AUDOUT_FIFO_PIO_WRL                        ((0x34ba  << 2) + 0xffd00000)
#define AUDOUT_FIFO_PIO_WRH                        ((0x34bb  << 2) + 0xffd00000)
//`define AUDOUT1_FIFO_PIO_STS		8'hbc
//`define AUDOUT1_FIFO_PIO_WRL        	8'hbd
//`define AUDOUT1_FIFO_PIO_WRH        	8'hbe
#define AUD_RESAMPLE_CTRL0                         ((0x34bf  << 2) + 0xffd00000)
#define AUD_RESAMPLE_CTRL1                         ((0x34c0  << 2) + 0xffd00000)
#define AUD_RESAMPLE_STATUS                        ((0x34c1  << 2) + 0xffd00000)
#define AUD_RESAMPLE_CTRL2                         ((0x34c2  << 2) + 0xffd00000)
#define AUD_RESAMPLE_COEF0                         ((0x34c3  << 2) + 0xffd00000)
#define AUD_RESAMPLE_COEF1                         ((0x34c4  << 2) + 0xffd00000)
#define AUD_RESAMPLE_COEF2                         ((0x34c5  << 2) + 0xffd00000)
#define AUD_RESAMPLE_COEF3                         ((0x34c6  << 2) + 0xffd00000)
#define AUD_RESAMPLE_COEF4                         ((0x34c7  << 2) + 0xffd00000)
#define AUDIN_ADDR_END                             ((0x34c8  << 2) + 0xffd00000)
#define AUDIN_ATV_DEMOD_CTRL                       ((0x34d0  << 2) + 0xffd00000)
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  ./register_map.h
//
//
// Reading file:  ./vcbus_regs.h
//
// synopsys translate_off
// synopsys translate_on
//===========================================================================
//`define RDMA_VCBUS_BASE       8'h11
//===========================================================================
//
// Reading file:  rdma_regs.h
//
//===========================================================================
// RDMA registers 0x00 - 0xff
//===========================================================================
// -----------------------------------------------
// CBUS_BASE:  RDMA_VCBUS_BASE = 0x11
// -----------------------------------------------
// Bit 31: 0 RW AHB start address for manual start DMA
#define RDMA_AHB_START_ADDR_MAN                    ((0x1100  << 2) + 0xff900000)
// Bit 31: 0 RW AHB end address for manual start DMA
#define RDMA_AHB_END_ADDR_MAN                      ((0x1101  << 2) + 0xff900000)
// Bit 31: 0 RW AHB start address for auto start source 1
#define RDMA_AHB_START_ADDR_1                      ((0x1102  << 2) + 0xff900000)
// Bit 31: 0 RW AHB end address for auto start source 1
#define RDMA_AHB_END_ADDR_1                        ((0x1103  << 2) + 0xff900000)
// Bit 31: 0 RW AHB start address for auto start source 2
#define RDMA_AHB_START_ADDR_2                      ((0x1104  << 2) + 0xff900000)
// Bit 31: 0 RW AHB end address for auto start source 2
#define RDMA_AHB_END_ADDR_2                        ((0x1105  << 2) + 0xff900000)
// Bit 31: 0 RW AHB start address for auto start source 3
#define RDMA_AHB_START_ADDR_3                      ((0x1106  << 2) + 0xff900000)
// Bit 31: 0 RW AHB end address for auto start source 3
#define RDMA_AHB_END_ADDR_3                        ((0x1107  << 2) + 0xff900000)
// Bit 31: 0 RW AHB start address for auto start source 4
#define RDMA_AHB_START_ADDR_4                      ((0x1108  << 2) + 0xff900000)
// Bit 31: 0 RW AHB end address for auto start source 4
#define RDMA_AHB_END_ADDR_4                        ((0x1109  << 2) + 0xff900000)
// Bit 31: 0 RW AHB start address for auto start source 5
#define RDMA_AHB_START_ADDR_5                      ((0x110a  << 2) + 0xff900000)
// Bit 31: 0 RW AHB end address for auto start source 5
#define RDMA_AHB_END_ADDR_5                        ((0x110b  << 2) + 0xff900000)
// Bit 31: 0 RW AHB start address for auto start source 6
#define RDMA_AHB_START_ADDR_6                      ((0x110c  << 2) + 0xff900000)
// Bit 31: 0 RW AHB end address for auto start source 6
#define RDMA_AHB_END_ADDR_6                        ((0x110d  << 2) + 0xff900000)
// Bit 31: 0 RW AHB start address for auto start source 7
#define RDMA_AHB_START_ADDR_7                      ((0x110e  << 2) + 0xff900000)
// Bit 31: 0 RW AHB end address for auto start source 7
#define RDMA_AHB_END_ADDR_7                        ((0x110f  << 2) + 0xff900000)
// Auto start DMA control:
// Bit 31:24 RW ctrl_enable_int_3. Interrupt inputs enable mask for source 3.
// Bit 23:16 RW ctrl_enable_int_2. Interrupt inputs enable mask for source 2.
// Bit 15: 8 RW ctrl_enable_int_1. Interrupt inputs enable mask for source 1.
// Bit     7 RW ctrl_cbus_write_3. Register read/write mode for auto-start 3. 1=Register write; 0=Register read.
// Bit     6 RW ctrl_cbus_write_3. Register read/write mode for auto-start 2. 1=Register write; 0=Register read.
// Bit     5 RW ctrl_cbus_write_3. Register read/write mode for auto-start 1. 1=Register write; 0=Register read.
// Bit     4 R  Rsrv.
// Bit     3 RW ctrl_cbus_addr_incr_3. 1=Incremental register access for auto-start 3; 0=Non-incremental (individual) register access.
// Bit     2 RW ctrl_cbus_addr_incr_2. 1=Incremental register access for auto-start 2; 0=Non-incremental (individual) register access.
// Bit     1 RW ctrl_cbus_addr_incr_1. 1=Incremental register access for auto-start 1; 0=Non-incremental (individual) register access.
// Bit     0 R  Rsrv.
#define RDMA_ACCESS_AUTO                           ((0x1110  << 2) + 0xff900000)
#define RDMA_ACCESS_AUTO2                          ((0x1111  << 2) + 0xff900000)
#define RDMA_ACCESS_AUTO3                          ((0x1112  << 2) + 0xff900000)
// Manual start DMA control:
// Bit 31: 3 R  Rsrv.
// Bit     2 RW ctrl_cbus_write_man. Register read/write mode for manual-start. 1=Register write; 0=Register read.
// Bit     1 RW ctrl_cbus_addr_incr_man. 1=Incremental register access for manual-start; 0=Non-incremental (individual) register access.
// Bit     0 W  ctrl_start_man. Write 1 to this bit to manual-start DMA. This bit always read back 0.
#define RDMA_ACCESS_MAN                            ((0x1113  << 2) + 0xff900000)
// RDMA general control:
// Bit 31:25 R  Rsrv.
// Bit    24 W  ctrl_clr_rdma_done_int. Write 1 to reset rdma_int level to 0. No need to clear this bit.
// Bit 23:19 R  Rsrv.
// Bit 18:13 R  Rsrv.
// Bit 12: 7 R  Rsrv.
// Bit     6 RW ctrl_ddr_urgent.
// Bit  5: 4 RW ctrl_ahb_wr_burst_size. 0=ABH write request burst size 16;
//                                      1=ABH write request burst size 24;
//                                      2=ABH write request burst size 32;
//                                      3=ABH write request burst size 48.
// Bit  3: 2 RW ctrl_ahb_rd_burst_size. 0=ABH read request burst size 16;
//                                      1=ABH read request burst size 24;
//                                      2=ABH read request burst size 32;
//                                      3=ABH read request burst size 48.
// Bit     1 RW ctrl_sw_reset. 1=Reset RDMA logics except register.
// Bit     0 RW ctrl_free_clk_enable. 0=Default, Enable clock gating. 1=No clock gating, enable free clock.
#define RDMA_CTRL                                  ((0x1114  << 2) + 0xff900000)
// Read only.
// Bit 31:29 R  Rsrv.
// Bit    28 R  rdma_done_int.
// Bit 27:25 R  Rsrv.
// Bit 24:18 R  ahb_wrfifo_cnt. FIFO for buffering CBus read data to be sent to AHB
// Bit 17:11 R  ahb_rdfifo_cnt. FIFO for buffering data read from AHB.
// Bit 10: 8 R  ddr_req_st. =0 -- Idle; !=0 -- AHB interfacing ongoing.
// Bit  7: 4 R  curr_req. Latest requests that is being/been serviced. E.g. 0000=Idle; 0010=Latest serviced request is Req 1.
// Bit  3: 0 R  req_latch. Requests that are yet to be serviced. E.g. 0000=No request; 0001=Req 0 waiting; 1100=Req 2 and 3 waiting.
#define RDMA_STATUS                                ((0x1115  << 2) + 0xff900000)
#define RDMA_STATUS2                               ((0x1116  << 2) + 0xff900000)
#define RDMA_STATUS3                               ((0x1117  << 2) + 0xff900000)
#define RDMA_ACCESS_AUTO4                          ((0x1118  << 2) + 0xff900000)
#define RDMA_SRAM_CNTL                             ((0x1120  << 2) + 0xff900000)
#define RDMA_SRAM_REGADDR                          ((0x1121  << 2) + 0xff900000)
#define RDMA_SRAM_REGDATA                          ((0x1122  << 2) + 0xff900000)
//
// Closing file:  rdma_regs.h
//
//===========================================================================
// VDIN
//===========================================================================
// -----------------------------------------------
// CBUS_BASE:  VDIN_VCBUS_BASE = 0x12
// -----------------------------------------------
//VDIN0        8'h00 - 8'h7f
//VDIN1        8'h80 - 8'hef
#define VDIN0_OFFSET            0x00
#define VDIN1_OFFSET            0x80

#define VDIN_SCALE_COEF_IDX                        ((0x1200  << 2) + 0xff900000)
#define VDIN_SCALE_COEF                            ((0x1201  << 2) + 0xff900000)
//bit 31,   mpeg_to_vdin_sel, 0: mpeg source to NR directly, 1: mpeg source pass through here
//bit 30,   mpeg_field info which can be written by software
//Bit 29,   force go_field, pulse signal
//Bit 28,   force go_line, pulse signal
//Bit 27,   enable mpeg_go_field input signal
//Bit 26:20, hold lines
//Bit 19,   delay go_field function enable
//Bit 18:12, delay go_field line number
//Bit 11:10, component2 output switch, 00: select component0 in, 01: select component1 in, 10: select component2 in
//Bit 9:8, component1 output switch, 00: select component0 in, 01: select component1 in, 10: select component2 in
//Bit 7:6, component0 output switch, 00: select component0 in, 01: select component1 in, 10: select component2 in
//Bit 5,   input window selection function enable
//Bit 4, enable VDIN common data input, otherwise there will be no video data input
//Bit 3:0 vdin selection, 1: mpeg_in from dram, 2: bt656 input, 3: component input, 4: tvdecoder input, 5: hdmi rx input, 6: digtial video input, 7: loopback from Viu1, 8: MIPI.
#define VDIN_COM_CTRL0                             ((0x1202  << 2) + 0xff900000)
//Bit 28:16 active_max_pix_cnt, readonly
//Bit 12:0  active_max_pix_cnt_shadow, readonly
#define VDIN_ACTIVE_MAX_PIX_CNT_STATUS             ((0x1203  << 2) + 0xff900000)
//Bit 28:16 go_line_cnt, readonly
//Bit 12:0  active_line_cnt, readonly
#define VDIN_LCNT_STATUS                           ((0x1204  << 2) + 0xff900000)
//Readonly
//Bit [14:3] lfifo_buf_cnt
//Bit 2, vdin_direct_done status
//Bit 1, vdin_nr_done status
//Bit 0, field
#define VDIN_COM_STATUS0                           ((0x1205  << 2) + 0xff900000)
//Readonly
//Bit 31, vdi4 fifo overflow
//Bit 29:24, vdi3_asfifo_cnt
//Bit 23, vdi3 fifo overflow
//Bit 21:16, vdi3_asfifo_cnt
//Bit 15, vdi2 fifo overflow
//Bit 13:8, vdi2_asfifo_cnt
//Bit 7, vdi1 fifo overflow
//Bit 5:0, vdi1_asfifo_cnt
#define VDIN_COM_STATUS1                           ((0x1206  << 2) + 0xff900000)
//Bit 28:16 go_line_cnt_shadow, readonly
//Bit 12:0  active_line_cnt_shadow, readonly
#define VDIN_LCNT_SHADOW_STATUS                    ((0x1207  << 2) + 0xff900000)
//each 8bit asfifo_ctrl is following:
//Bit 7, DE  enable
//Bit 6, go field enable
//Bit 5, go line enable
//Bit 4, if true, negative active input vsync
//Bit 3, if true, negative active input hsync
//Bit 2, vsync soft reset fifo enable
//Bit 1, overflow status clear
//Bit 0 asfifo soft reset, level signal
//Bit 7:0 vdi1 asfifo_ctrl
//Bit 23:16 vdi2 asfifo_ctrl
#define VDIN_ASFIFO_CTRL0                          ((0x1208  << 2) + 0xff900000)
//Bit 7:0 vdi3 asfifo_ctrl
//Bit 23:16 vdi4 asfifo_ctrl
#define VDIN_ASFIFO_CTRL1                          ((0x1209  << 2) + 0xff900000)
//Bit 28:16 input width minus 1, after the window function
//Bit 12:0  output width minus 1
#define VDIN_WIDTHM1I_WIDTHM1O                     ((0x120a  << 2) + 0xff900000)
//Bit 20:17 prehsc_mode, bit 3:2, prehsc odd line interp mode, bit 1:0, prehsc even line interp mode,
//           each 2bit, 00: pix0+pix1/2, average, 01: pix1, 10: pix0
//Bit 16:15 sp422_mode, special mode for the component1 and component2, 00: normal case, 01: 32 64 32, 10: 0 64 64 0, 11: 16 96 16
//Bit 14:8, hsc_ini_pixi_ptr, signed data, only useful when short_lineo_en is true
//Bit 7, prehsc_en
//Bit 6, hsc_en,
//Bit 5, hsc_short_lineo_en, short line output enable
//Bit 4, hsc_nearest_en
//Bit 3, hsc_phase0_always_en
//Bit 2:0, hsc_bank_length
#define VDIN_SC_MISC_CTRL                          ((0x120b  << 2) + 0xff900000)
//Bit 28:24, integer portion
//Bit 23:0, fraction portion
#define VDIN_HSC_PHASE_STEP                        ((0x120c  << 2) + 0xff900000)
//Bit 30:29    hscale rpt_p0_num
//Bit 28:24    hscale ini_rcv_num
//Bit 23:0     hscale ini_phase
#define VDIN_HSC_INI_CTRL                          ((0x120d  << 2) + 0xff900000)
//Read only
//Bit 23, vdi7 fifo overflow
//Bit 21:16, vdi7_asfifo_cnt
//Bit 15, vdi6 fifo overflow
//Bit 13:8, vdi6_asfifo_cnt
//Bit 7, vdi5 fifo overflow
//Bit 5:0, vdi5_asfifo_cnt
#define VDIN_COM_STATUS2                           ((0x120e  << 2) + 0xff900000)
//Bit 25:16 asfifo decimate control
//Bit 25, if true, decimation counter sync with first valid DE in the field,
//otherwise the decimation counter is not sync with external signal
//Bit 24, decimation de enable
//Bit 23:20, decimation phase, which counter value use to decimate,
//Bit 19:16, decimation number, 0: not decimation, 1: decimation 2, 2: decimation 3 ....
//Bit 7:0 vdi5 asfifo_ctrl
#define VDIN_ASFIFO_CTRL2                          ((0x120f  << 2) + 0xff900000)
//Bit 7,  highlight_en
//Bit 6   probe_post, if true, probe pixel data after matrix, otherwise probe pixel data before matrix
//Bit 5:4  probe_sel, 00: select matrix 0, 01: select matrix 1,  otherwise select nothing
//Bit 3:2, matrix coef idx selection, 00: select mat0, 01: select mat1, otherwise slect nothing
//Bit 1   mat1 conversion matrix enable
//Bit 0   mat0 conversion matrix enable
#define VDIN_MATRIX_CTRL                           ((0x1210  << 2) + 0xff900000)
//Bit 28:16 coef00
//Bit 12:0  coef01
#define VDIN_MATRIX_COEF00_01                      ((0x1211  << 2) + 0xff900000)
//Bit 28:16 coef02
//Bit 12:0  coef10
#define VDIN_MATRIX_COEF02_10                      ((0x1212  << 2) + 0xff900000)
//Bit 28:16 coef11
//Bit 12:0  coef12
#define VDIN_MATRIX_COEF11_12                      ((0x1213  << 2) + 0xff900000)
//Bit 28:16 coef20
//Bit 12:0  coef21
#define VDIN_MATRIX_COEF20_21                      ((0x1214  << 2) + 0xff900000)
//BIt 18:16 conv_rs
//Bit 12:0  coef22
#define VDIN_MATRIX_COEF22                         ((0x1215  << 2) + 0xff900000)
//Bit 26:16 offset0
//Bit 10:0  offset1
#define VDIN_MATRIX_OFFSET0_1                      ((0x1216  << 2) + 0xff900000)
//Bit 10:0  offset2
#define VDIN_MATRIX_OFFSET2                        ((0x1217  << 2) + 0xff900000)
//Bit 26:16 pre_offset0
//Bit 10:0  pre_offset1
#define VDIN_MATRIX_PRE_OFFSET0_1                  ((0x1218  << 2) + 0xff900000)
//Bit 10:0  pre_offset2
#define VDIN_MATRIX_PRE_OFFSET2                    ((0x1219  << 2) + 0xff900000)
//12:0 lfifo_buf_size
#define VDIN_LFIFO_CTRL                            ((0x121a  << 2) + 0xff900000)
#define VDIN_COM_GCLK_CTRL                         ((0x121b  << 2) + 0xff900000)
//12:0 VDIN input interface width minus 1, before the window function, after the de decimation
#define VDIN_INTF_WIDTHM1                          ((0x121c  << 2) + 0xff900000)
//Bit 15          //default== 0, urgent_ctrl_en
//Bit 14          //default== 0, urgent_wr, if true for write buffer
//Bit 13          //default== 0, out_inv_en
//Bit 12          //default == 0, urgent_ini_value
//Bit 11:6        //default == 0, up_th  up threshold
//Bit 5:0         //default == 0, dn_th  dn threshold
#define VDIN_LFIFO_URG_CTRL                        ((0x121e  << 2) + 0xff900000)
//Bit 8, 1: discard data before line fifo, 0: normal mode
//Bit 7:0 Write chroma canvas address
#define VDIN_WR_CTRL2                              ((0x121f  << 2) + 0xff900000)
//Bit 31:30 hconv_mode, Applicable only to bit[13:12]=0 or 2. 0: Output every even pixels' CbCr;
//                                                            1: Output every odd pixels' CbCr;
//                                                            2: Output an average value per even&odd pair of pixels;
//                                                            3: Output all CbCr. (This does NOT apply to bit[13:12]=0 -- 4:2:2 mode.)
//Bit 29 no_clk_gate: disable vid_wr_mif clock gating function.
//Bit 28 clear write response counter in the vdin write memory interface
//Bit 27 eol_sel, 1: use eol as the line end indication, 0: use width as line end indication in the vdin write memory interface
//Bit 26 vcp_nr_en. Only used in VDIN0. NOT used in VDIN1.
//Bit 25 vcp_wr_en. Only used in VDIN0. NOT used in VDIN1.
//Bit 24 vcp_in_en. Only used in VDIN0. NOT used in VDIN1.
//Bit 23 vdin frame reset enble, if true, it will provide frame reset during go_field(vsync) to the modules after that
//Bit 22 vdin line fifo soft reset enable, meaning, if true line fifo will reset during go_field (vsync)
//Bit 21 vdin direct write done status clear bit
//Bit 20 vdin NR write done status clear bit
//Bit 18 swap_cbcr. Applicable only to bit[13:12]=2. 0: Output CbCr (NV12); 1: Output CrCb (NV21).
//Bit 17:16 vconv_mode, Applicable only to bit[13:12]=2. 0: Output every even lines' CbCr;
//                                                       1: Output every odd lines' CbCr;
//                                                       2: Reserved;
//                                                       3: Output all CbCr.
//Bit 13:12 vdin write format, 0: 4:2:2 to luma canvas, 1: 4:4:4 to luma canvas,
//                             2: Y to luma canvas, CbCr to chroma canvas. For NV12/21, also define Bit 31:30, 17:16, and bit 18.
//Bit 11 vdin write canvas double buffer enable, means the canvas address will be latched by vsync before using
//Bit 10 1: disable ctrl_reg write pulse which will reset internal counter. when bit 11 is 1, this bit should be 1.
//Bit 9 vdin write request urgent
//Bit 8 vdin write request enable
//Bit 7:0 Write luma canvas address
#define VDIN_WR_CTRL                               ((0x1220  << 2) + 0xff900000)
//Bit 29, if true, horizontal reverse
//Bit 28:16 start
//Bit 12:0  end
#define VDIN_WR_H_START_END                        ((0x1221  << 2) + 0xff900000)
//Bit 29, if true, vertical reverse
//Bit 28:16 start
//Bit 12:0  end
#define VDIN_WR_V_START_END                        ((0x1222  << 2) + 0xff900000)
//Bit 24:20, integer portion
//Bit 19:0, fraction portion
#define VDIN_VSC_PHASE_STEP                        ((0x1223  << 2) + 0xff900000)
//Bit 23, vsc_en, vertical scaler enable
//Bit 21 vsc_phase0_always_en, when scale up, you have to set it to 1
//Bit 20:16 ini skip_line_num
//Bit 15:0 vscaler ini_phase
#define VDIN_VSC_INI_CTRL                          ((0x1224  << 2) + 0xff900000)
//Bit 28:16, vshrink input height minus 1
//Bit 12:0, scaler input height minus 1
#define VDIN_SCIN_HEIGHTM1                         ((0x1225  << 2) + 0xff900000)
//Bit 23:16, dummy component 0
//Bit 15:8, dummy component 1
//Bit 7:0, dummy component 2
#define VDIN_DUMMY_DATA                            ((0x1226  << 2) + 0xff900000)
//Read only
//Bit 29:20 component 0
//Bit 19:10 component 1
//Bit 9:0 component 2
#define VDIN_MATRIX_PROBE_COLOR                    ((0x1228  << 2) + 0xff900000)
//Bit 23:16 component 0
//Bit 15:8  component 1
//Bit 7:0 component 2
#define VDIN_MATRIX_HL_COLOR                       ((0x1229  << 2) + 0xff900000)
//28:16 probe x, postion
//12:0  probe y, position
#define VDIN_MATRIX_PROBE_POS                      ((0x122a  << 2) + 0xff900000)
#define VDIN_CHROMA_ADDR_PORT                      ((0x122b  << 2) + 0xff900000)
#define VDIN_CHROMA_DATA_PORT                      ((0x122c  << 2) + 0xff900000)
//
#define VDIN_CM_BRI_CON_CTRL                       ((0x122d  << 2) + 0xff900000)
//Bit 17  clk_cyc_cnt_clr, if true, clear this register
//Bit 16 if true, use vpu clock to count one line, otherwise use actually hsync to count line_cnt
//Bit 15:0   line width using vpu clk
#define VDIN_GO_LINE_CTRL                          ((0x122f  << 2) + 0xff900000)
//Bit 31:24 hist_pix_white_th, larger than this th is counted as white pixel
//Bit 23:16 hist_pix_black_th, less than this th is counted as black pixel
//Bit 11    hist_34bin_only,   34 bin only mode, including white/black
//Bit 10:9  ldim_stts_din_sel, 00: from matrix0 dout,  01: from vsc_dout, 10: from matrix1 dout, 11: form matrix1 din
//Bit 8     ldim_stts_en
//Bit 6:5   hist_dnlp_low   the real pixels in each bins got by VDIN_DNLP_HISTXX should multiple with 2^(dnlp_low+3)
//Bit 3:2   hist_din_sel    the source used for hist statistics.  00: from matrix0 dout,  01: from vsc_dout, 10: from matrix1 dout, 11: form matrix1 din
//Bit 1     hist_win_en     1'b0: hist used for full picture; 1'b1: hist used for pixels within hist window
//Bit 0     hist_spl_en     1'b0: disable hist readback; 1'b1: enable hist readback
#define VDIN_HIST_CTRL                             ((0x1230  << 2) + 0xff900000)
//Bit 28:16 hist_hstart  horizontal start value to define hist window
//Bit 12:0  hist_hend    horizontal end value to define hist window
#define VDIN_HIST_H_START_END                      ((0x1231  << 2) + 0xff900000)
//Bit 28:16 hist_vstart  vertical start value to define hist window
//Bit 12:0  hist_vend    vertical end value to define hist window
#define VDIN_HIST_V_START_END                      ((0x1232  << 2) + 0xff900000)
//Bit 15:8  hist_max    maximum value
//Bit 7:0   hist_min    minimum value
//read only
#define VDIN_HIST_MAX_MIN                          ((0x1233  << 2) + 0xff900000)
//Bit 31:0  hist_spl_rd
//counts for the total luma value
//read only
#define VDIN_HIST_SPL_VAL                          ((0x1234  << 2) + 0xff900000)
//Bit 21:0  hist_spl_pixel_count
//counts for the total calculated pixels
//read only
#define VDIN_HIST_SPL_PIX_CNT                      ((0x1235  << 2) + 0xff900000)
//Bit 31:0  hist_chroma_sum
//counts for the total chroma value
//read only
#define VDIN_HIST_CHROMA_SUM                       ((0x1236  << 2) + 0xff900000)
//Bit 31:16 higher hist bin
//Bit 15:0  lower hist bin
//0-255 are splited to 64 bins evenly, and VDIN_DNLP_HISTXX
//are the statistic number of pixels that within each bin.
//VDIN_DNLP_HIST00[15:0]  counts for the first  bin
//VDIN_DNLP_HIST00[31:16] counts for the second bin
//VDIN_DNLP_HIST01[15:0]  counts for the third  bin
//VDIN_DNLP_HIST01[31:16] counts for the fourth bin
//etc...
//read only
#define VDIN_DNLP_HIST00                           ((0x1237  << 2) + 0xff900000)
#define VDIN_DNLP_HIST01                           ((0x1238  << 2) + 0xff900000)
#define VDIN_DNLP_HIST02                           ((0x1239  << 2) + 0xff900000)
#define VDIN_DNLP_HIST03                           ((0x123a  << 2) + 0xff900000)
#define VDIN_DNLP_HIST04                           ((0x123b  << 2) + 0xff900000)
#define VDIN_DNLP_HIST05                           ((0x123c  << 2) + 0xff900000)
#define VDIN_DNLP_HIST06                           ((0x123d  << 2) + 0xff900000)
#define VDIN_DNLP_HIST07                           ((0x123e  << 2) + 0xff900000)
#define VDIN_DNLP_HIST08                           ((0x123f  << 2) + 0xff900000)
#define VDIN_DNLP_HIST09                           ((0x1240  << 2) + 0xff900000)
#define VDIN_DNLP_HIST10                           ((0x1241  << 2) + 0xff900000)
#define VDIN_DNLP_HIST11                           ((0x1242  << 2) + 0xff900000)
#define VDIN_DNLP_HIST12                           ((0x1243  << 2) + 0xff900000)
#define VDIN_DNLP_HIST13                           ((0x1244  << 2) + 0xff900000)
#define VDIN_DNLP_HIST14                           ((0x1245  << 2) + 0xff900000)
#define VDIN_DNLP_HIST15                           ((0x1246  << 2) + 0xff900000)
#define VDIN_DNLP_HIST16                           ((0x1247  << 2) + 0xff900000)
#define VDIN_DNLP_HIST17                           ((0x1248  << 2) + 0xff900000)
#define VDIN_DNLP_HIST18                           ((0x1249  << 2) + 0xff900000)
#define VDIN_DNLP_HIST19                           ((0x124a  << 2) + 0xff900000)
#define VDIN_DNLP_HIST20                           ((0x124b  << 2) + 0xff900000)
#define VDIN_DNLP_HIST21                           ((0x124c  << 2) + 0xff900000)
#define VDIN_DNLP_HIST22                           ((0x124d  << 2) + 0xff900000)
#define VDIN_DNLP_HIST23                           ((0x124e  << 2) + 0xff900000)
#define VDIN_DNLP_HIST24                           ((0x124f  << 2) + 0xff900000)
#define VDIN_DNLP_HIST25                           ((0x1250  << 2) + 0xff900000)
#define VDIN_DNLP_HIST26                           ((0x1251  << 2) + 0xff900000)
#define VDIN_DNLP_HIST27                           ((0x1252  << 2) + 0xff900000)
#define VDIN_DNLP_HIST28                           ((0x1253  << 2) + 0xff900000)
#define VDIN_DNLP_HIST29                           ((0x1254  << 2) + 0xff900000)
#define VDIN_DNLP_HIST30                           ((0x1255  << 2) + 0xff900000)
#define VDIN_DNLP_HIST31                           ((0x1256  << 2) + 0xff900000)
//Bit 31, local dimming statistic enable
//Bit 28, eol enable
//Bit 27:25, vertical line overlap number for max finding
//Bit 24:22, horizontal pixel overlap number, 0: 17 pix, 1: 9 pix, 2: 5 pix, 3: 3 pix, 4: 0 pix
//Bit 20, 1,2,1 low pass filter enable before max/hist statistic
//Bit 19:16, region H/V position index, refer to VDIN_LDIM_STTS_HIST_SET_REGION
//Bit 15, 1: region read index auto increase per read to VDIN_LDIM_STTS_HIST_READ_REGION
//Bit 6:0, region read index
#define VDIN_LDIM_STTS_HIST_REGION_IDX             ((0x1257  << 2) + 0xff900000)
//Bit 28:0, if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'h0: read/write hvstart0
//			if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'h1: read/write hend01
//			if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'h2: read/write vend01
//			if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'h3: read/write hend23
//			if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'h4: read/write vend23
//			if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'h5: read/write hend45
//			if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'h6: read/write vend45
//			if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'd7: read/write hend67
//			if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'h8: read/write vend67
//			if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'h9: read/write hend89
//			if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'ha: read/write vend89
//hvstart0, Bit 28:16 row0 vstart, Bit 12:0 col0 hstart
//hend01, Bit 28:16 col1 hend, Bit 12:0 col0 hend
//vend01, Bit 28:16 row1 vend, Bit 12:0 row0 vend
//hend23, Bit 28:16 col3 hend, Bit 12:0 col2 hend
//vend23, Bit 28:16 row3 vend, Bit 12:0 row2 vend
//hend45, Bit 28:16 col5 hend, Bit 12:0 col4 hend
//vend45, Bit 28:16 row5 vend, Bit 12:0 row4 vend
//hend67, Bit 28:16 col7 hend, Bit 12:0 col6 hend
//vend67, Bit 28:16 row7 vend, Bit 12:0 row6 vend
//hend89, Bit 28:16 col9 hend, Bit 12:0 col8 hend
//vend89, Bit 28:16 row9 vend, Bit 12:0 row8 vend
#define VDIN_LDIM_STTS_HIST_SET_REGION             ((0x1258  << 2) + 0xff900000)
//REGION STATISTIC DATA READ OUT PORT, bit 29:20 max_comp2, bit 19:10 max_comp1, bit 9:0 max_comp0
#define VDIN_LDIM_STTS_HIST_READ_REGION            ((0x1259  << 2) + 0xff900000)
//Bit 18, reset bit, high active
//Bit 17, if true, widen hs/vs pulse
//Bit 16  vsync total counter always accumulating enable
//Bit 14:12, select hs/vs of video input channel to measure, 0: no selection, 1: vdi1, 2: vid2, 3: vid3, 4:vid4, 5:vdi5, 6:vid6, 7:vdi7, 8: vdi8
//Bit 11:4, vsync_span, define how many vsync span need to measure
//Bit 2:0  meas_hs_index, index to select which HS counter/range
#define VDIN_MEAS_CTRL0                            ((0x125a  << 2) + 0xff900000)
//Read only
//19:16     meas_ind_total_count_n, every number of sync_span vsyncs, this count add 1
//15:0      high bit portion of vsync total counter
#define VDIN_MEAS_VS_COUNT_HI                      ((0x125b  << 2) + 0xff900000)
//Read only
//31:0, low bit portion of vsync total counter
#define VDIN_MEAS_VS_COUNT_LO                      ((0x125c  << 2) + 0xff900000)
//according to the meas_hs_index in register VDIN_MEAS_CTRL0
//meas_hs_index == 0, first hs range
//meas_hs_index == 1, second hs range
//meas_hs_index == 2, third hs range
//meas_hs_index == 3, fourth hs range
//bit 28:16 count_start
//bit 12:0 count_end
#define VDIN_MEAS_HS_RANGE                         ((0x125d  << 2) + 0xff900000)
//Read only
//according to the meas_hs_index in register VDIN_MEAS_CTRL0,
//meas_hs_index == 0, first range hs counter,
//meas_hs_index == 1, second range hs coutner
//meas_hs_index == 2, third range hs coutner
//meas_hs_index == 3, fourth range hs coutner
//23:0
#define VDIN_MEAS_HS_COUNT                         ((0x125e  << 2) + 0xff900000)
//Bit 8      white_enable
//Bit 7:0    blkbar_white_level
#define VDIN_BLKBAR_CTRL1                          ((0x125f  << 2) + 0xff900000)
// Bit 31:24 blkbar_black_level    threshold to judge a black point
// Bit 23:21 Reserved
// Bit 20:8  blkbar_hwidth         left and right region width
// Bit 7:5   blkbar_comp_sel       select yin or uin or vin to be the valid input
// Bit 4     blkbar_sw_statistic_en enable software statistic of each block black points number
// Bit 3     blkbar_det_en
// Bit 2:1   blkbar_din_sel
// bit blkbar_det_top_en
#define VDIN_BLKBAR_CTRL0                          ((0x1260  << 2) + 0xff900000)
// Bit 31:29 Reserved
// Bit 28:16 blkbar_hstart.        Left region start
// Bit 15:13 Reserved
// Bit 12:0  blkbar_hend.          Right region end
#define VDIN_BLKBAR_H_START_END                    ((0x1261  << 2) + 0xff900000)
// Bit 31:29 Reserved
// Bit 28:16 blkbar_vstart
// Bit 15:13 Reserved
// Bit 12:0  blkbar_vend
#define VDIN_BLKBAR_V_START_END                    ((0x1262  << 2) + 0xff900000)
// Bit 31:20 Reserved
// Bit 19:0  blkbar_cnt_threshold. threshold to judge whether a block is totally black
#define VDIN_BLKBAR_CNT_THRESHOLD                  ((0x1263  << 2) + 0xff900000)
// Bit 31:29 Reserved
// Bit 28:16 blkbar_row_th1.       //threshold of the top blackbar
// Bit 15:13 Reserved
// bit 12:0  blkbar_row_th2        //threshold of the bottom blackbar
#define VDIN_BLKBAR_ROW_TH1_TH2                    ((0x1264  << 2) + 0xff900000)
//Readonly
// Bit 31:29 Reserved
// Bit 28:16 blkbar_ind_left_start. horizontal start of the left region in the current searching
// Bit 15:13 Reserved
// Bit 12:0  blkbar_ind_left_end.   horizontal end of the left region in the current searching
#define VDIN_BLKBAR_IND_LEFT_START_END             ((0x1265  << 2) + 0xff900000)
//Readonly
// Bit 31:29 Reserved
// Bit 28:16 blkbar_ind_right_start.horizontal start of the right region in the current searching
// Bit 15:13 Reserved
// Bit 12:0  blkbar_ind_right_end.  horizontal end of the right region in the current searching
#define VDIN_BLKBAR_IND_RIGHT_START_END            ((0x1266  << 2) + 0xff900000)
//Readonly
// Bit 31:20 Reserved
// Bit 19:0  blkbar_ind_left1_cnt.  Black pixel counter. left part of the left region
#define VDIN_BLKBAR_IND_LEFT1_CNT                  ((0x1267  << 2) + 0xff900000)
//Readonly
// Bit 31:20 Reserved
// Bit 19:0  blkbar_ind_left2_cnt.  Black pixel counter. right part of the left region
#define VDIN_BLKBAR_IND_LEFT2_CNT                  ((0x1268  << 2) + 0xff900000)
//Readonly
// Bit 31:20 Reserved
// Bit 19:0  blkbar_ind_right1_cnt. Black pixel counter. left part of the right region
#define VDIN_BLKBAR_IND_RIGHT1_CNT                 ((0x1269  << 2) + 0xff900000)
//Readonly
// Bit 31:20 Reserved
// Bit 19:0  blkbar_ind_right2_cnt. Black pixel counter. right part of the right region
#define VDIN_BLKBAR_IND_RIGHT2_CNT                 ((0x126a  << 2) + 0xff900000)
//Readonly
// Bit 31:30 Resersed
// Bit 29    blkbar_ind_black_det_done. LEFT/RIGHT Black detection done
// Bit 28:16 blkbar_top_pos.            Top black bar position
// Bit 15:13 Reserved.
// Bit 12:0  blkbar_bot_pos.            Bottom black bar position
#define VDIN_BLKBAR_STATUS0                        ((0x126b  << 2) + 0xff900000)
//Readonly
// Bit 31:29 Reserved
// Bit 28:16 blkbar_left_pos.       Left black bar posiont
// Bit 15:13 Reserved
// Bit 12:0  blkbar_right_pos.      Right black bar position
#define VDIN_BLKBAR_STATUS1                        ((0x126c  << 2) + 0xff900000)
//Bit 28:16 input window H start
//Bit 12:0  input window H end
#define VDIN_WIN_H_START_END                       ((0x126d  << 2) + 0xff900000)
//Bit 28:16 input window H start
//Bit 12:0  input window V start
#define VDIN_WIN_V_START_END                       ((0x126e  << 2) + 0xff900000)
//Bit 23:16 vdi8 asfifo_ctrl
//Bit 15:8 vdi7 asfifo_ctrl
//Bit 7:0 vdi6 asfifo_ctrl
#define VDIN_ASFIFO_CTRL3                          ((0x126f  << 2) + 0xff900000)
//Bit 3:2 vshrk_clk2_ctrl
//Bit 1:0 vshrk_clk1_ctrl
#define VDIN_COM_GCLK_CTRL2                        ((0x1270  << 2) + 0xff900000)
//Bit 27 vshrk_en
//Bit 26:25 vshrk_mode
//Bit 24 vshrk_lpf_mode
//Bit 23:0 vshrk_dummy
#define VDIN_VSHRK_CTRL                            ((0x1271  << 2) + 0xff900000)
#define VDIN_DNLP_HIST32                           ((0x1272  << 2) + 0xff900000)
//Read only
//Bit 7, vdi9 fifo overflow
//Bit 5:0, vdi9_asfifo_cnt
#define VDIN_COM_STATUS3                           ((0x1273  << 2) + 0xff900000)
#define VDIN_SYNC_MASK                             ((0x1274  << 2) + 0xff900000)
//Bit 7:0,  hsync_mask_num
//Bit 15:8, vsync_mask_num
//Bit 16,   hsync_mask_enable
//Bit 17,   vsync_mask_num
//dolby vdin
#define VDIN_DOLBY_DSC_CTRL0                       ((0x1275  << 2) + 0xff900000)
#define VDIN_DOLBY_DSC_CTRL1                       ((0x1276  << 2) + 0xff900000)
#define VDIN_DOLBY_DSC_CTRL2                       ((0x1277  << 2) + 0xff900000)
#define VDIN_DOLBY_DSC_CTRL3                       ((0x1278  << 2) + 0xff900000)
#define VDIN_DOLBY_AXI_CTRL0                       ((0x1279  << 2) + 0xff900000)
#define VDIN_DOLBY_AXI_CTRL1                       ((0x127a  << 2) + 0xff900000)
#define VDIN_DOLBY_AXI_CTRL2                       ((0x127b  << 2) + 0xff900000)
#define VDIN_DOLBY_AXI_CTRL3                       ((0x127c  << 2) + 0xff900000)
#define VDIN_DOLBY_DSC_STATUS0                     ((0x127d  << 2) + 0xff900000)
#define VDIN_DOLBY_DSC_STATUS1                     ((0x127e  << 2) + 0xff900000)
#define VDIN_DOLBY_DSC_STATUS2                     ((0x127f  << 2) + 0xff900000)
#define VDIN_DOLBY_DSC_STATUS3                     ((0x121d  << 2) + 0xff900000)

//8'h72 occupied by histogram 32
//VDIN0        8'h00 - 8'h7f
#define VDIN0_SCALE_COEF_IDX                    ((VDIN0_OFFSET << 2) + VDIN_SCALE_COEF_IDX               )
#define VDIN0_SCALE_COEF                        ((VDIN0_OFFSET << 2) + VDIN_SCALE_COEF                   )
#define VDIN0_COM_CTRL0                         ((VDIN0_OFFSET << 2) + VDIN_COM_CTRL0                    )
#define VDIN0_ACTIVE_MAX_PIX_CNT_STATUS         ((VDIN0_OFFSET << 2) + VDIN_ACTIVE_MAX_PIX_CNT_STATUS    )
#define VDIN0_LCNT_STATUS                       ((VDIN0_OFFSET << 2) + VDIN_LCNT_STATUS                  )
#define VDIN0_COM_STATUS0                       ((VDIN0_OFFSET << 2) + VDIN_COM_STATUS0                  )
#define VDIN0_COM_STATUS1                       ((VDIN0_OFFSET << 2) + VDIN_COM_STATUS1                  )
#define VDIN0_LCNT_SHADOW_STATUS                ((VDIN0_OFFSET << 2) + VDIN_LCNT_SHADOW_STATUS           )
#define VDIN0_ASFIFO_CTRL0                      ((VDIN0_OFFSET << 2) + VDIN_ASFIFO_CTRL0                 )
#define VDIN0_ASFIFO_CTRL1                      ((VDIN0_OFFSET << 2) + VDIN_ASFIFO_CTRL1                 )
#define VDIN0_WIDTHM1I_WIDTHM1O                 ((VDIN0_OFFSET << 2) + VDIN_WIDTHM1I_WIDTHM1O            )
#define VDIN0_SC_MISC_CTRL                      ((VDIN0_OFFSET << 2) + VDIN_SC_MISC_CTRL                 )
#define VDIN0_HSC_PHASE_STEP                    ((VDIN0_OFFSET << 2) + VDIN_HSC_PHASE_STEP               )
#define VDIN0_HSC_INI_CTRL                      ((VDIN0_OFFSET << 2) + VDIN_HSC_INI_CTRL                 )
#define VDIN0_COM_STATUS2                       ((VDIN0_OFFSET << 2) + VDIN_COM_STATUS2                  )
#define VDIN0_COM_STATUS3                       ((VDIN0_OFFSET << 2) + VDIN_COM_STATUS3                  )
#define VDIN0_ASFIFO_CTRL2                      ((VDIN0_OFFSET << 2) + VDIN_ASFIFO_CTRL2                 )
#define VDIN0_MATRIX_CTRL                       ((VDIN0_OFFSET << 2) + VDIN_MATRIX_CTRL                  )
#define VDIN0_MATRIX_COEF00_01                  ((VDIN0_OFFSET << 2) + VDIN_MATRIX_COEF00_01             )
#define VDIN0_MATRIX_COEF02_10                  ((VDIN0_OFFSET << 2) + VDIN_MATRIX_COEF02_10             )
#define VDIN0_MATRIX_COEF11_12                  ((VDIN0_OFFSET << 2) + VDIN_MATRIX_COEF11_12             )
#define VDIN0_MATRIX_COEF20_21                  ((VDIN0_OFFSET << 2) + VDIN_MATRIX_COEF20_21             )
#define VDIN0_MATRIX_COEF22                     ((VDIN0_OFFSET << 2) + VDIN_MATRIX_COEF22                )
#define VDIN0_MATRIX_OFFSET0_1                  ((VDIN0_OFFSET << 2) + VDIN_MATRIX_OFFSET0_1             )
#define VDIN0_MATRIX_OFFSET2                    ((VDIN0_OFFSET << 2) + VDIN_MATRIX_OFFSET2               )
#define VDIN0_MATRIX_PRE_OFFSET0_1              ((VDIN0_OFFSET << 2) + VDIN_MATRIX_PRE_OFFSET0_1         )
#define VDIN0_MATRIX_PRE_OFFSET2                ((VDIN0_OFFSET << 2) + VDIN_MATRIX_PRE_OFFSET2           )
#define VDIN0_LFIFO_CTRL                        ((VDIN0_OFFSET << 2) + VDIN_LFIFO_CTRL                   )
#define VDIN0_COM_GCLK_CTRL                     ((VDIN0_OFFSET << 2) + VDIN_COM_GCLK_CTRL                )
#define VDIN0_INTF_WIDTHM1                      ((VDIN0_OFFSET << 2) + VDIN_INTF_WIDTHM1                 )
#define VDIN0_WR_CTRL2                          ((VDIN0_OFFSET << 2) + VDIN_WR_CTRL2                     )
#define VDIN0_WR_CTRL                           ((VDIN0_OFFSET << 2) + VDIN_WR_CTRL                      )
#define VDIN0_WR_H_START_END                    ((VDIN0_OFFSET << 2) + VDIN_WR_H_START_END               )
#define VDIN0_WR_V_START_END                    ((VDIN0_OFFSET << 2) + VDIN_WR_V_START_END               )
#define VDIN0_VSC_PHASE_STEP                    ((VDIN0_OFFSET << 2) + VDIN_VSC_PHASE_STEP               )
#define VDIN0_VSC_INI_CTRL                      ((VDIN0_OFFSET << 2) + VDIN_VSC_INI_CTRL                 )
#define VDIN0_SCIN_HEIGHTM1                     ((VDIN0_OFFSET << 2) + VDIN_SCIN_HEIGHTM1                )
#define VDIN0_DUMMY_DATA                        ((VDIN0_OFFSET << 2) + VDIN_DUMMY_DATA                   )
#define VDIN0_MATRIX_PROBE_COLOR                ((VDIN0_OFFSET << 2) + VDIN_MATRIX_PROBE_COLOR           )
#define VDIN0_MATRIX_HL_COLOR                   ((VDIN0_OFFSET << 2) + VDIN_MATRIX_HL_COLOR              )
#define VDIN0_MATRIX_PROBE_POS                  ((VDIN0_OFFSET << 2) + VDIN_MATRIX_PROBE_POS             )
#define VDIN0_CHROMA_ADDR_PORT                  ((VDIN0_OFFSET << 2) + VDIN_CHROMA_ADDR_PORT             )
#define VDIN0_CHROMA_DATA_PORT                  ((VDIN0_OFFSET << 2) + VDIN_CHROMA_DATA_PORT             )
#define VDIN0_CM_BRI_CON_CTRL                   ((VDIN0_OFFSET << 2) + VDIN_CM_BRI_CON_CTRL              )
#define VDIN0_HIST_CTRL                         ((VDIN0_OFFSET << 2) + VDIN_HIST_CTRL                    )
#define VDIN0_HIST_H_START_END                  ((VDIN0_OFFSET << 2) + VDIN_HIST_H_START_END             )
#define VDIN0_HIST_V_START_END                  ((VDIN0_OFFSET << 2) + VDIN_HIST_V_START_END             )
#define VDIN0_HIST_MAX_MIN                      ((VDIN0_OFFSET << 2) + VDIN_HIST_MAX_MIN                 )
#define VDIN0_HIST_SPL_VAL                      ((VDIN0_OFFSET << 2) + VDIN_HIST_SPL_VAL                 )
#define VDIN0_HIST_SPL_PIX_CNT                  ((VDIN0_OFFSET << 2) + VDIN_HIST_SPL_PIX_CNT             )
#define VDIN0_HIST_CHROMA_SUM                   ((VDIN0_OFFSET << 2) + VDIN_HIST_CHROMA_SUM              )
#define VDIN0_DNLP_HIST00                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST00                  )
#define VDIN0_DNLP_HIST01                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST01                  )
#define VDIN0_DNLP_HIST02                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST02                  )
#define VDIN0_DNLP_HIST03                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST03                  )
#define VDIN0_DNLP_HIST04                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST04                  )
#define VDIN0_DNLP_HIST05                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST05                  )
#define VDIN0_DNLP_HIST06                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST06                  )
#define VDIN0_DNLP_HIST07                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST07                  )
#define VDIN0_DNLP_HIST08                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST08                  )
#define VDIN0_DNLP_HIST09                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST09                  )
#define VDIN0_DNLP_HIST10                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST10                  )
#define VDIN0_DNLP_HIST11                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST11                  )
#define VDIN0_DNLP_HIST12                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST12                  )
#define VDIN0_DNLP_HIST13                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST13                  )
#define VDIN0_DNLP_HIST14                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST14                  )
#define VDIN0_DNLP_HIST15                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST15                  )
#define VDIN0_DNLP_HIST16                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST16                  )
#define VDIN0_DNLP_HIST17                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST17                  )
#define VDIN0_DNLP_HIST18                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST18                  )
#define VDIN0_DNLP_HIST19                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST19                  )
#define VDIN0_DNLP_HIST20                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST20                  )
#define VDIN0_DNLP_HIST21                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST21                  )
#define VDIN0_DNLP_HIST22                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST22                  )
#define VDIN0_DNLP_HIST23                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST23                  )
#define VDIN0_DNLP_HIST24                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST24                  )
#define VDIN0_DNLP_HIST25                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST25                  )
#define VDIN0_DNLP_HIST26                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST26                  )
#define VDIN0_DNLP_HIST27                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST27                  )
#define VDIN0_DNLP_HIST28                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST28                  )
#define VDIN0_DNLP_HIST29                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST29                  )
#define VDIN0_DNLP_HIST30                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST30                  )
#define VDIN0_DNLP_HIST31                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST31                  )
#define VDIN0_DNLP_HIST32                       ((VDIN0_OFFSET << 2) + VDIN_DNLP_HIST32                  )
#define VDIN0_LDIM_STTS_HIST_REGION_IDX         ((VDIN0_OFFSET << 2) + VDIN_LDIM_STTS_HIST_REGION_IDX    )
#define VDIN0_LDIM_STTS_HIST_SET_REGION         ((VDIN0_OFFSET << 2) + VDIN_LDIM_STTS_HIST_SET_REGION    )
#define VDIN0_LDIM_STTS_HIST_READ_REGION        ((VDIN0_OFFSET << 2) + VDIN_LDIM_STTS_HIST_READ_REGION   )
#define VDIN0_MEAS_CTRL0                        ((VDIN0_OFFSET << 2) + VDIN_MEAS_CTRL0                   )
#define VDIN0_MEAS_VS_COUNT_HI                  ((VDIN0_OFFSET << 2) + VDIN_MEAS_VS_COUNT_HI             )
#define VDIN0_MEAS_VS_COUNT_LO                  ((VDIN0_OFFSET << 2) + VDIN_MEAS_VS_COUNT_LO             )
#define VDIN0_MEAS_HS_RANGE                     ((VDIN0_OFFSET << 2) + VDIN_MEAS_HS_RANGE                )
#define VDIN0_MEAS_HS_COUNT                     ((VDIN0_OFFSET << 2) + VDIN_MEAS_HS_COUNT                )
#define VDIN0_BLKBAR_CTRL1                      ((VDIN0_OFFSET << 2) + VDIN_BLKBAR_CTRL1                 )
#define VDIN0_BLKBAR_CTRL0                      ((VDIN0_OFFSET << 2) + VDIN_BLKBAR_CTRL0                 )
#define VDIN0_BLKBAR_H_START_END                ((VDIN0_OFFSET << 2) + VDIN_BLKBAR_H_START_END           )
#define VDIN0_BLKBAR_V_START_END                ((VDIN0_OFFSET << 2) + VDIN_BLKBAR_V_START_END           )
#define VDIN0_BLKBAR_CNT_THRESHOLD              ((VDIN0_OFFSET << 2) + VDIN_BLKBAR_CNT_THRESHOLD         )
#define VDIN0_BLKBAR_ROW_TH1_TH2                ((VDIN0_OFFSET << 2) + VDIN_BLKBAR_ROW_TH1_TH2           )
#define VDIN0_BLKBAR_IND_LEFT_START_END         ((VDIN0_OFFSET << 2) + VDIN_BLKBAR_IND_LEFT_START_END    )
#define VDIN0_BLKBAR_IND_RIGHT_START_END        ((VDIN0_OFFSET << 2) + VDIN_BLKBAR_IND_RIGHT_START_END   )
#define VDIN0_BLKBAR_IND_LEFT1_CNT              ((VDIN0_OFFSET << 2) + VDIN_BLKBAR_IND_LEFT1_CNT         )
#define VDIN0_BLKBAR_IND_LEFT2_CNT              ((VDIN0_OFFSET << 2) + VDIN_BLKBAR_IND_LEFT2_CNT         )
#define VDIN0_BLKBAR_IND_RIGHT1_CNT             ((VDIN0_OFFSET << 2) + VDIN_BLKBAR_IND_RIGHT1_CNT        )
#define VDIN0_BLKBAR_IND_RIGHT2_CNT             ((VDIN0_OFFSET << 2) + VDIN_BLKBAR_IND_RIGHT2_CNT        )
#define VDIN0_BLKBAR_STATUS0                    ((VDIN0_OFFSET << 2) + VDIN_BLKBAR_STATUS0               )
#define VDIN0_BLKBAR_STATUS1                    ((VDIN0_OFFSET << 2) + VDIN_BLKBAR_STATUS1               )
#define VDIN0_WIN_H_START_END                   ((VDIN0_OFFSET << 2) + VDIN_WIN_H_START_END              )
#define VDIN0_WIN_V_START_END                   ((VDIN0_OFFSET << 2) + VDIN_WIN_V_START_END              )
#define VDIN0_ASFIFO_CTRL3                      ((VDIN0_OFFSET << 2) + VDIN_ASFIFO_CTRL3                 )
#define VDIN0_COM_GCLK_CTRL2                    ((VDIN0_OFFSET << 2) + VDIN_COM_GCLK_CTRL2               )
#define VDIN0_VSHRK_CTRL                        ((VDIN0_OFFSET << 2) + VDIN_VSHRK_CTRL                   )
#define VDIN0_SYNC_MASK                         ((VDIN0_OFFSET << 2) + VDIN_SYNC_MASK                    )
#define VDIN0_DOLBY_DSC_CTRL0                    ((VDIN0_OFFSET << 2) + VDIN_DOLBY_DSC_CTRL0  )
#define VDIN0_DOLBY_DSC_CTRL1                    ((VDIN0_OFFSET << 2) + VDIN_DOLBY_DSC_CTRL1  )
#define VDIN0_DOLBY_DSC_CTRL2                    ((VDIN0_OFFSET << 2) + VDIN_DOLBY_DSC_CTRL2  )
#define VDIN0_DOLBY_DSC_CTRL3                    ((VDIN0_OFFSET << 2) + VDIN_DOLBY_DSC_CTRL3  )
#define VDIN0_DOLBY_AXI_CTRL0                    ((VDIN0_OFFSET << 2) + VDIN_DOLBY_AXI_CTRL0  )
#define VDIN0_DOLBY_AXI_CTRL1                    ((VDIN0_OFFSET << 2) + VDIN_DOLBY_AXI_CTRL1  )
#define VDIN0_DOLBY_AXI_CTRL2                    ((VDIN0_OFFSET << 2) + VDIN_DOLBY_AXI_CTRL2  )
#define VDIN0_DOLBY_AXI_CTRL3                    ((VDIN0_OFFSET << 2) + VDIN_DOLBY_AXI_CTRL3  )
#define VDIN0_DOLBY_DSC_STATUS0                  ((VDIN0_OFFSET << 2) + VDIN_DOLBY_DSC_STATUS0)
#define VDIN0_DOLBY_DSC_STATUS1                  ((VDIN0_OFFSET << 2) + VDIN_DOLBY_DSC_STATUS1)
#define VDIN0_DOLBY_DSC_STATUS2                  ((VDIN0_OFFSET << 2) + VDIN_DOLBY_DSC_STATUS2)
#define VDIN0_DOLBY_DSC_STATUS3                  ((VDIN0_OFFSET << 2) + VDIN_DOLBY_DSC_STATUS3)


//VDIN1        8'h80 - 8'hef
#define VDIN1_SCALE_COEF_IDX                    ((VDIN1_OFFSET << 2) + VDIN_SCALE_COEF_IDX               )
#define VDIN1_SCALE_COEF                        ((VDIN1_OFFSET << 2) + VDIN_SCALE_COEF                   )
#define VDIN1_COM_CTRL0                         ((VDIN1_OFFSET << 2) + VDIN_COM_CTRL0                    )
#define VDIN1_ACTIVE_MAX_PIX_CNT_STATUS         ((VDIN1_OFFSET << 2) + VDIN_ACTIVE_MAX_PIX_CNT_STATUS    )
#define VDIN1_LCNT_STATUS                       ((VDIN1_OFFSET << 2) + VDIN_LCNT_STATUS                  )
#define VDIN1_COM_STATUS0                       ((VDIN1_OFFSET << 2) + VDIN_COM_STATUS0                  )
#define VDIN1_COM_STATUS1                       ((VDIN1_OFFSET << 2) + VDIN_COM_STATUS1                  )
#define VDIN1_LCNT_SHADOW_STATUS                ((VDIN1_OFFSET << 2) + VDIN_LCNT_SHADOW_STATUS           )
#define VDIN1_ASFIFO_CTRL0                      ((VDIN1_OFFSET << 2) + VDIN_ASFIFO_CTRL0                 )
#define VDIN1_ASFIFO_CTRL1                      ((VDIN1_OFFSET << 2) + VDIN_ASFIFO_CTRL1                 )
#define VDIN1_WIDTHM1I_WIDTHM1O                 ((VDIN1_OFFSET << 2) + VDIN_WIDTHM1I_WIDTHM1O            )
#define VDIN1_SC_MISC_CTRL                      ((VDIN1_OFFSET << 2) + VDIN_SC_MISC_CTRL                 )
#define VDIN1_HSC_PHASE_STEP                    ((VDIN1_OFFSET << 2) + VDIN_HSC_PHASE_STEP               )
#define VDIN1_HSC_INI_CTRL                      ((VDIN1_OFFSET << 2) + VDIN_HSC_INI_CTRL                 )
#define VDIN1_COM_STATUS2                       ((VDIN1_OFFSET << 2) + VDIN_COM_STATUS2                  )
#define VDIN1_COM_STATUS3                       ((VDIN1_OFFSET << 2) + VDIN_COM_STATUS3                  )
#define VDIN1_ASFIFO_CTRL2                      ((VDIN1_OFFSET << 2) + VDIN_ASFIFO_CTRL2                 )
#define VDIN1_MATRIX_CTRL                       ((VDIN1_OFFSET << 2) + VDIN_MATRIX_CTRL                  )
#define VDIN1_MATRIX_COEF00_01                  ((VDIN1_OFFSET << 2) + VDIN_MATRIX_COEF00_01             )
#define VDIN1_MATRIX_COEF02_10                  ((VDIN1_OFFSET << 2) + VDIN_MATRIX_COEF02_10             )
#define VDIN1_MATRIX_COEF11_12                  ((VDIN1_OFFSET << 2) + VDIN_MATRIX_COEF11_12             )
#define VDIN1_MATRIX_COEF20_21                  ((VDIN1_OFFSET << 2) + VDIN_MATRIX_COEF20_21             )
#define VDIN1_MATRIX_COEF22                     ((VDIN1_OFFSET << 2) + VDIN_MATRIX_COEF22                )
#define VDIN1_MATRIX_OFFSET0_1                  ((VDIN1_OFFSET << 2) + VDIN_MATRIX_OFFSET0_1             )
#define VDIN1_MATRIX_OFFSET2                    ((VDIN1_OFFSET << 2) + VDIN_MATRIX_OFFSET2               )
#define VDIN1_MATRIX_PRE_OFFSET0_1              ((VDIN1_OFFSET << 2) + VDIN_MATRIX_PRE_OFFSET0_1         )
#define VDIN1_MATRIX_PRE_OFFSET2                ((VDIN1_OFFSET << 2) + VDIN_MATRIX_PRE_OFFSET2           )
#define VDIN1_LFIFO_CTRL                        ((VDIN1_OFFSET << 2) + VDIN_LFIFO_CTRL                   )
#define VDIN1_COM_GCLK_CTRL                     ((VDIN1_OFFSET << 2) + VDIN_COM_GCLK_CTRL                )
#define VDIN1_INTF_WIDTHM1                      ((VDIN1_OFFSET << 2) + VDIN_INTF_WIDTHM1                 )
#define VDIN1_WR_CTRL2                          ((VDIN1_OFFSET << 2) + VDIN_WR_CTRL2                     )
#define VDIN1_WR_CTRL                           ((VDIN1_OFFSET << 2) + VDIN_WR_CTRL                      )
#define VDIN1_WR_H_START_END                    ((VDIN1_OFFSET << 2) + VDIN_WR_H_START_END               )
#define VDIN1_WR_V_START_END                    ((VDIN1_OFFSET << 2) + VDIN_WR_V_START_END               )
#define VDIN1_VSC_PHASE_STEP                    ((VDIN1_OFFSET << 2) + VDIN_VSC_PHASE_STEP               )
#define VDIN1_VSC_INI_CTRL                      ((VDIN1_OFFSET << 2) + VDIN_VSC_INI_CTRL                 )
#define VDIN1_SCIN_HEIGHTM1                     ((VDIN1_OFFSET << 2) + VDIN_SCIN_HEIGHTM1                )
#define VDIN1_DUMMY_DATA                        ((VDIN1_OFFSET << 2) + VDIN_DUMMY_DATA                   )
#define VDIN1_MATRIX_PROBE_COLOR                ((VDIN1_OFFSET << 2) + VDIN_MATRIX_PROBE_COLOR           )
#define VDIN1_MATRIX_HL_COLOR                   ((VDIN1_OFFSET << 2) + VDIN_MATRIX_HL_COLOR              )
#define VDIN1_MATRIX_PROBE_POS                  ((VDIN1_OFFSET << 2) + VDIN_MATRIX_PROBE_POS             )
#define VDIN1_CHROMA_ADDR_PORT                  ((VDIN1_OFFSET << 2) + VDIN_CHROMA_ADDR_PORT             )
#define VDIN1_CHROMA_DATA_PORT                  ((VDIN1_OFFSET << 2) + VDIN_CHROMA_DATA_PORT             )
#define VDIN1_CM_BRI_CON_CTRL                   ((VDIN1_OFFSET << 2) + VDIN_CM_BRI_CON_CTRL              )
#define VDIN1_HIST_CTRL                         ((VDIN1_OFFSET << 2) + VDIN_HIST_CTRL                    )
#define VDIN1_HIST_H_START_END                  ((VDIN1_OFFSET << 2) + VDIN_HIST_H_START_END             )
#define VDIN1_HIST_V_START_END                  ((VDIN1_OFFSET << 2) + VDIN_HIST_V_START_END             )
#define VDIN1_HIST_MAX_MIN                      ((VDIN1_OFFSET << 2) + VDIN_HIST_MAX_MIN                 )
#define VDIN1_HIST_SPL_VAL                      ((VDIN1_OFFSET << 2) + VDIN_HIST_SPL_VAL                 )
#define VDIN1_HIST_SPL_PIX_CNT                  ((VDIN1_OFFSET << 2) + VDIN_HIST_SPL_PIX_CNT             )
#define VDIN1_HIST_CHROMA_SUM                   ((VDIN1_OFFSET << 2) + VDIN_HIST_CHROMA_SUM              )
#define VDIN1_DNLP_HIST00                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST00                  )
#define VDIN1_DNLP_HIST01                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST01                  )
#define VDIN1_DNLP_HIST02                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST02                  )
#define VDIN1_DNLP_HIST03                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST03                  )
#define VDIN1_DNLP_HIST04                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST04                  )
#define VDIN1_DNLP_HIST05                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST05                  )
#define VDIN1_DNLP_HIST06                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST06                  )
#define VDIN1_DNLP_HIST07                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST07                  )
#define VDIN1_DNLP_HIST08                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST08                  )
#define VDIN1_DNLP_HIST09                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST09                  )
#define VDIN1_DNLP_HIST10                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST10                  )
#define VDIN1_DNLP_HIST11                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST11                  )
#define VDIN1_DNLP_HIST12                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST12                  )
#define VDIN1_DNLP_HIST13                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST13                  )
#define VDIN1_DNLP_HIST14                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST14                  )
#define VDIN1_DNLP_HIST15                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST15                  )
#define VDIN1_DNLP_HIST16                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST16                  )
#define VDIN1_DNLP_HIST17                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST17                  )
#define VDIN1_DNLP_HIST18                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST18                  )
#define VDIN1_DNLP_HIST19                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST19                  )
#define VDIN1_DNLP_HIST20                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST20                  )
#define VDIN1_DNLP_HIST21                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST21                  )
#define VDIN1_DNLP_HIST22                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST22                  )
#define VDIN1_DNLP_HIST23                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST23                  )
#define VDIN1_DNLP_HIST24                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST24                  )
#define VDIN1_DNLP_HIST25                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST25                  )
#define VDIN1_DNLP_HIST26                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST26                  )
#define VDIN1_DNLP_HIST27                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST27                  )
#define VDIN1_DNLP_HIST28                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST28                  )
#define VDIN1_DNLP_HIST29                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST29                  )
#define VDIN1_DNLP_HIST30                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST30                  )
#define VDIN1_DNLP_HIST31                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST31                  )
#define VDIN1_DNLP_HIST32                       ((VDIN1_OFFSET << 2) + VDIN_DNLP_HIST32                  )
#define VDIN1_LDIM_STTS_HIST_REGION_IDX         ((VDIN1_OFFSET << 2) + VDIN_LDIM_STTS_HIST_REGION_IDX    )
#define VDIN1_LDIM_STTS_HIST_SET_REGION         ((VDIN1_OFFSET << 2) + VDIN_LDIM_STTS_HIST_SET_REGION    )
#define VDIN1_LDIM_STTS_HIST_READ_REGION        ((VDIN1_OFFSET << 2) + VDIN_LDIM_STTS_HIST_READ_REGION   )
#define VDIN1_MEAS_CTRL0                        ((VDIN1_OFFSET << 2) + VDIN_MEAS_CTRL0                   )
#define VDIN1_MEAS_VS_COUNT_HI                  ((VDIN1_OFFSET << 2) + VDIN_MEAS_VS_COUNT_HI             )
#define VDIN1_MEAS_VS_COUNT_LO                  ((VDIN1_OFFSET << 2) + VDIN_MEAS_VS_COUNT_LO             )
#define VDIN1_MEAS_HS_RANGE                     ((VDIN1_OFFSET << 2) + VDIN_MEAS_HS_RANGE                )
#define VDIN1_MEAS_HS_COUNT                     ((VDIN1_OFFSET << 2) + VDIN_MEAS_HS_COUNT                )
#define VDIN1_BLKBAR_CTRL1                      ((VDIN1_OFFSET << 2) + VDIN_BLKBAR_CTRL1                 )
#define VDIN1_BLKBAR_CTRL0                      ((VDIN1_OFFSET << 2) + VDIN_BLKBAR_CTRL0                 )
#define VDIN1_BLKBAR_H_START_END                ((VDIN1_OFFSET << 2) + VDIN_BLKBAR_H_START_END           )
#define VDIN1_BLKBAR_V_START_END                ((VDIN1_OFFSET << 2) + VDIN_BLKBAR_V_START_END           )
#define VDIN1_BLKBAR_CNT_THRESHOLD              ((VDIN1_OFFSET << 2) + VDIN_BLKBAR_CNT_THRESHOLD         )
#define VDIN1_BLKBAR_ROW_TH1_TH2                ((VDIN1_OFFSET << 2) + VDIN_BLKBAR_ROW_TH1_TH2           )
#define VDIN1_BLKBAR_IND_LEFT_START_END         ((VDIN1_OFFSET << 2) + VDIN_BLKBAR_IND_LEFT_START_END    )
#define VDIN1_BLKBAR_IND_RIGHT_START_END        ((VDIN1_OFFSET << 2) + VDIN_BLKBAR_IND_RIGHT_START_END   )
#define VDIN1_BLKBAR_IND_LEFT1_CNT              ((VDIN1_OFFSET << 2) + VDIN_BLKBAR_IND_LEFT1_CNT         )
#define VDIN1_BLKBAR_IND_LEFT2_CNT              ((VDIN1_OFFSET << 2) + VDIN_BLKBAR_IND_LEFT2_CNT         )
#define VDIN1_BLKBAR_IND_RIGHT1_CNT             ((VDIN1_OFFSET << 2) + VDIN_BLKBAR_IND_RIGHT1_CNT        )
#define VDIN1_BLKBAR_IND_RIGHT2_CNT             ((VDIN1_OFFSET << 2) + VDIN_BLKBAR_IND_RIGHT2_CNT        )
#define VDIN1_BLKBAR_STATUS0                    ((VDIN1_OFFSET << 2) + VDIN_BLKBAR_STATUS0               )
#define VDIN1_BLKBAR_STATUS1                    ((VDIN1_OFFSET << 2) + VDIN_BLKBAR_STATUS1               )
#define VDIN1_WIN_H_START_END                   ((VDIN1_OFFSET << 2) + VDIN_WIN_H_START_END              )
#define VDIN1_WIN_V_START_END                   ((VDIN1_OFFSET << 2) + VDIN_WIN_V_START_END              )
#define VDIN1_ASFIFO_CTRL3                      ((VDIN1_OFFSET << 2) + VDIN_ASFIFO_CTRL3                 )
#define VDIN1_COM_GCLK_CTRL2                    ((VDIN1_OFFSET << 2) + VDIN_COM_GCLK_CTRL2               )
#define VDIN1_VSHRK_CTRL                        ((VDIN1_OFFSET << 2) + VDIN_VSHRK_CTRL                   )
#define VDIN1_SYNC_MASK                         ((VDIN1_OFFSET << 2) + VDIN_SYNC_MASK                    )
#define VDIN1_DOLBY_DSC_CTRL0                    ((VDIN1_OFFSET << 2) + VDIN_DOLBY_DSC_CTRL0  )
#define VDIN1_DOLBY_DSC_CTRL1                    ((VDIN1_OFFSET << 2) + VDIN_DOLBY_DSC_CTRL1  )
#define VDIN1_DOLBY_DSC_CTRL2                    ((VDIN1_OFFSET << 2) + VDIN_DOLBY_DSC_CTRL2  )
#define VDIN1_DOLBY_DSC_CTRL3                    ((VDIN1_OFFSET << 2) + VDIN_DOLBY_DSC_CTRL3  )
#define VDIN1_DOLBY_AXI_CTRL0                    ((VDIN1_OFFSET << 2) + VDIN_DOLBY_AXI_CTRL0  )
#define VDIN1_DOLBY_AXI_CTRL1                    ((VDIN1_OFFSET << 2) + VDIN_DOLBY_AXI_CTRL1  )
#define VDIN1_DOLBY_AXI_CTRL2                    ((VDIN1_OFFSET << 2) + VDIN_DOLBY_AXI_CTRL2  )
#define VDIN1_DOLBY_AXI_CTRL3                    ((VDIN1_OFFSET << 2) + VDIN_DOLBY_AXI_CTRL3  )
#define VDIN1_DOLBY_DSC_STATUS0                  ((VDIN1_OFFSET << 2) + VDIN_DOLBY_DSC_STATUS0)
#define VDIN1_DOLBY_DSC_STATUS1                  ((VDIN1_OFFSET << 2) + VDIN_DOLBY_DSC_STATUS1)
#define VDIN1_DOLBY_DSC_STATUS2                  ((VDIN1_OFFSET << 2) + VDIN_DOLBY_DSC_STATUS2)
#define VDIN1_DOLBY_DSC_STATUS3                  ((VDIN1_OFFSET << 2) + VDIN_DOLBY_DSC_STATUS3)

//`define LCD_VCBUS_BASE               8'h14
//
// Reading file:  lcd_regs.h
//
// -----------------------------------------------
// CBUS_BASE:  LCD_VCBUS_BASE = 0x14
// -----------------------------------------------
//========================================================================
//LCD DRV     12'h480~12'h4ef
//=======================================================================
#define L_GAMMA_CNTL_PORT                          ((0x1400  << 2) + 0xff900000)
#define L_GAMMA_DATA_PORT                          ((0x1401  << 2) + 0xff900000)
#define L_GAMMA_ADDR_PORT                          ((0x1402  << 2) + 0xff900000)
#define L_GAMMA_VCOM_HSWITCH_ADDR                  ((0x1403  << 2) + 0xff900000)
#define L_RGB_BASE_ADDR                            ((0x1405  << 2) + 0xff900000)
#define L_RGB_COEFF_ADDR                           ((0x1406  << 2) + 0xff900000)
#define L_POL_CNTL_ADDR                            ((0x1407  << 2) + 0xff900000)
#define L_DITH_CNTL_ADDR                           ((0x1408  << 2) + 0xff900000)
#define L_GAMMA_PROBE_CTRL                         ((0x1409  << 2) + 0xff900000)
//read only
#define L_GAMMA_PROBE_COLOR_L                      ((0x140a  << 2) + 0xff900000)
#define L_GAMMA_PROBE_COLOR_H                      ((0x140b  << 2) + 0xff900000)
#define L_GAMMA_PROBE_HL_COLOR                     ((0x140c  << 2) + 0xff900000)
#define L_GAMMA_PROBE_POS_X                        ((0x140d  << 2) + 0xff900000)
#define L_GAMMA_PROBE_POS_Y                        ((0x140e  << 2) + 0xff900000)
#define L_STH1_HS_ADDR                             ((0x1410  << 2) + 0xff900000)
#define L_STH1_HE_ADDR                             ((0x1411  << 2) + 0xff900000)
#define L_STH1_VS_ADDR                             ((0x1412  << 2) + 0xff900000)
#define L_STH1_VE_ADDR                             ((0x1413  << 2) + 0xff900000)
#define L_STH2_HS_ADDR                             ((0x1414  << 2) + 0xff900000)
#define L_STH2_HE_ADDR                             ((0x1415  << 2) + 0xff900000)
#define L_STH2_VS_ADDR                             ((0x1416  << 2) + 0xff900000)
#define L_STH2_VE_ADDR                             ((0x1417  << 2) + 0xff900000)
#define L_OEH_HS_ADDR                              ((0x1418  << 2) + 0xff900000)
#define L_OEH_HE_ADDR                              ((0x1419  << 2) + 0xff900000)
#define L_OEH_VS_ADDR                              ((0x141a  << 2) + 0xff900000)
#define L_OEH_VE_ADDR                              ((0x141b  << 2) + 0xff900000)
#define L_VCOM_HSWITCH_ADDR                        ((0x141c  << 2) + 0xff900000)
#define L_VCOM_VS_ADDR                             ((0x141d  << 2) + 0xff900000)
#define L_VCOM_VE_ADDR                             ((0x141e  << 2) + 0xff900000)
#define L_CPV1_HS_ADDR                             ((0x141f  << 2) + 0xff900000)
#define L_CPV1_HE_ADDR                             ((0x1420  << 2) + 0xff900000)
#define L_CPV1_VS_ADDR                             ((0x1421  << 2) + 0xff900000)
#define L_CPV1_VE_ADDR                             ((0x1422  << 2) + 0xff900000)
#define L_CPV2_HS_ADDR                             ((0x1423  << 2) + 0xff900000)
#define L_CPV2_HE_ADDR                             ((0x1424  << 2) + 0xff900000)
#define L_CPV2_VS_ADDR                             ((0x1425  << 2) + 0xff900000)
#define L_CPV2_VE_ADDR                             ((0x1426  << 2) + 0xff900000)
#define L_STV1_HS_ADDR                             ((0x1427  << 2) + 0xff900000)
#define L_STV1_HE_ADDR                             ((0x1428  << 2) + 0xff900000)
#define L_STV1_VS_ADDR                             ((0x1429  << 2) + 0xff900000)
#define L_STV1_VE_ADDR                             ((0x142a  << 2) + 0xff900000)
#define L_STV2_HS_ADDR                             ((0x142b  << 2) + 0xff900000)
#define L_STV2_HE_ADDR                             ((0x142c  << 2) + 0xff900000)
#define L_STV2_VS_ADDR                             ((0x142d  << 2) + 0xff900000)
#define L_STV2_VE_ADDR                             ((0x142e  << 2) + 0xff900000)
#define L_OEV1_HS_ADDR                             ((0x142f  << 2) + 0xff900000)
#define L_OEV1_HE_ADDR                             ((0x1430  << 2) + 0xff900000)
#define L_OEV1_VS_ADDR                             ((0x1431  << 2) + 0xff900000)
#define L_OEV1_VE_ADDR                             ((0x1432  << 2) + 0xff900000)
#define L_OEV2_HS_ADDR                             ((0x1433  << 2) + 0xff900000)
#define L_OEV2_HE_ADDR                             ((0x1434  << 2) + 0xff900000)
#define L_OEV2_VS_ADDR                             ((0x1435  << 2) + 0xff900000)
#define L_OEV2_VE_ADDR                             ((0x1436  << 2) + 0xff900000)
#define L_OEV3_HS_ADDR                             ((0x1437  << 2) + 0xff900000)
#define L_OEV3_HE_ADDR                             ((0x1438  << 2) + 0xff900000)
#define L_OEV3_VS_ADDR                             ((0x1439  << 2) + 0xff900000)
#define L_OEV3_VE_ADDR                             ((0x143a  << 2) + 0xff900000)
#define L_LCD_PWR_ADDR                             ((0x143b  << 2) + 0xff900000)
#define L_LCD_PWM0_LO_ADDR                         ((0x143c  << 2) + 0xff900000)
#define L_LCD_PWM0_HI_ADDR                         ((0x143d  << 2) + 0xff900000)
#define L_LCD_PWM1_LO_ADDR                         ((0x143e  << 2) + 0xff900000)
#define L_LCD_PWM1_HI_ADDR                         ((0x143f  << 2) + 0xff900000)
#define L_INV_CNT_ADDR                             ((0x1440  << 2) + 0xff900000)
#define L_TCON_MISC_SEL_ADDR                       ((0x1441  << 2) + 0xff900000)
#define L_DUAL_PORT_CNTL_ADDR                      ((0x1442  << 2) + 0xff900000)
#define MLVDS_CLK_CTL1_HI                          ((0x1443  << 2) + 0xff900000)
#define MLVDS_CLK_CTL1_LO                          ((0x1444  << 2) + 0xff900000)
//  [31:30] enable mlvds clocks
//  [24]    mlvds_clk_half_delay       24 // Bit 0
//  [23:0]  mlvds_clk_pattern           0 // Bit 23:0
#define L_TCON_DOUBLE_CTL                          ((0x1449  << 2) + 0xff900000)
#define L_TCON_PATTERN_HI                          ((0x144a  << 2) + 0xff900000)
#define L_TCON_PATTERN_LO                          ((0x144b  << 2) + 0xff900000)
#define LDIM_BL_ADDR_PORT                          ((0x144e  << 2) + 0xff900000)
#define LDIM_BL_DATA_PORT                          ((0x144f  << 2) + 0xff900000)
#define L_DE_HS_ADDR                               ((0x1451  << 2) + 0xff900000)
#define L_DE_HE_ADDR                               ((0x1452  << 2) + 0xff900000)
#define L_DE_VS_ADDR                               ((0x1453  << 2) + 0xff900000)
#define L_DE_VE_ADDR                               ((0x1454  << 2) + 0xff900000)
#define L_HSYNC_HS_ADDR                            ((0x1455  << 2) + 0xff900000)
#define L_HSYNC_HE_ADDR                            ((0x1456  << 2) + 0xff900000)
#define L_HSYNC_VS_ADDR                            ((0x1457  << 2) + 0xff900000)
#define L_HSYNC_VE_ADDR                            ((0x1458  << 2) + 0xff900000)
#define L_VSYNC_HS_ADDR                            ((0x1459  << 2) + 0xff900000)
#define L_VSYNC_HE_ADDR                            ((0x145a  << 2) + 0xff900000)
#define L_VSYNC_VS_ADDR                            ((0x145b  << 2) + 0xff900000)
#define L_VSYNC_VE_ADDR                            ((0x145c  << 2) + 0xff900000)
// bit 8 -- vfifo_mcu_enable
// bit 7 -- halt_vs_de
// bit 6 -- R8G8B8_format
// bit 5 -- R6G6B6_format (round to 6 bits)
// bit 4 -- R5G6B5_format
// bit 3 -- dac_dith_sel
// bit 2 -- lcd_mcu_enable_de     -- ReadOnly
// bit 1 -- lcd_mcu_enable_vsync  -- ReadOnly
// bit 0 -- lcd_mcu_enable
#define L_LCD_MCU_CTL                              ((0x145d  << 2) + 0xff900000)
//**************************************************************************
//*  Dual port mLVDS registers
//**************************************************************************
// bit 3 - enable_u_dual_mlvds_dp_clk
// bit 2 - enable_u_map_mlvds_r_clk
// bit 1 - enable_u_map_mlvds_l_clk
// bit 0 - dual_mlvds_en
//`define DUAL_MLVDS_CTL                8'h60
// bit[12:0] - dual_mlvds_line_start
//`define DUAL_MLVDS_LINE_START         8'h61
// bit[12:0] - dual_mlvds_line_end
//`define DUAL_MLVDS_LINE_END           8'h62
// bit[12:0] - dual_mlvds_w_pixel_start_l
//`define DUAL_MLVDS_PIXEL_W_START_L    8'h63
// bit[12:0] - dual_mlvds_w_pixel_end_l
//`define DUAL_MLVDS_PIXEL_W_END_L      8'h64
// bit[12:0] - dual_mlvds_w_pixel_start_r
//`define DUAL_MLVDS_PIXEL_W_START_R    8'h65
// bit[12:0] - dual_mlvds_w_pixel_end_r
//`define DUAL_MLVDS_PIXEL_W_END_R      8'h66
// bit[12:0] - dual_mlvds_r_pixel_start_l
//`define DUAL_MLVDS_PIXEL_R_START_L    8'h67
// bit[12:0] - dual_mlvds_r_pixel_cnt_l
//`define DUAL_MLVDS_PIXEL_R_CNT_L      8'h68
// bit[12:0] - dual_mlvds_r_pixel_start_r
//`define DUAL_MLVDS_PIXEL_R_START_R    8'h69
// bit[12:0] - dual_mlvds_r_pixel_cnt_r
//`define DUAL_MLVDS_PIXEL_R_CNT_R      8'h6a
// bit[15]   - v_inversion_en
// bit[12:0] - v_inversion_pixel
//`define V_INVERSION_PIXEL             8'h70
// bit[15]   - v_inversion_sync_en
// bit[12:0] - v_inversion_line
//`define V_INVERSION_LINE              8'h71
// bit[15:12]  - v_loop_r
// bit[11:10]  - v_pattern_1_r
// bit[9:8]    - v_pattern_0_r
// bit[7:4]    - v_loop_l
// bit[3:2]    - v_pattern_1_l
// bit[1:0]    - v_pattern_0_l
//`define V_INVERSION_CONTROL           8'h72
//`define MLVDS2_CONTROL           8'h74
   #define     mLVDS2_RESERVED  15    // 15
   #define     mLVDS2_double_pattern  14    // 14
   #define     mLVDS2_ins_reset  8    // 13:8  // each channel has one bit
   #define     mLVDS2_dual_gate  7
   #define     mLVDS2_bit_num    6    // 0-6Bits, 1-8Bits
   #define     mLVDS2_pair_num   5    // 0-3Pairs, 1-6Pairs
   #define     mLVDS2_msb_first  4
   #define     mLVDS2_PORT_SWAP  3
   #define     mLVDS2_MLSB_SWAP  2
   #define     mLVDS2_PN_SWAP    1
   #define     mLVDS2_en         0
//`define MLVDS2_CONFIG_HI         8'h75
//`define MLVDS2_CONFIG_LO         8'h76
   #define     mLVDS2_reset_offset         29 // Bit 31:29
   #define     mLVDS2_reset_length         23 // Bit 28:23
   #define     mLVDS2_config_reserved      20 // Bit 22:20
   #define     mLVDS2_reset_start_bit12    19 // Bit 19
   #define     mLVDS2_data_write_toggle    18
   #define     mLVDS2_data_write_ini       17
   #define     mLVDS2_data_latch_1_toggle  16
   #define     mLVDS2_data_latch_1_ini     15
   #define     mLVDS2_data_latch_0_toggle  14
   #define     mLVDS2_data_latch_0_ini     13
   #define     mLVDS2_reset_1_select       12 // 0 - same as reset_0, 1 - 1 clock delay of reset_0
   #define     mLVDS2_reset_start           0 // Bit 11:0
//`define MLVDS2_DUAL_GATE_WR_START        8'h77
//   `define     mlvds2_dual_gate_wr_start    0 // Bit 12:0
//`define MLVDS2_DUAL_GATE_WR_END          8'h78
//   `define     mlvds2_dual_gate_wr_end      0 // Bit 12:0
//
//`define MLVDS2_DUAL_GATE_RD_START        8'h79
//   `define     mlvds2_dual_gate_rd_start    0 // Bit 12:0
//`define MLVDS2_DUAL_GATE_RD_END          8'h7a
//   `define     mlvds2_dual_gate_rd_end      0 // Bit 12:0
//`define MLVDS2_SECOND_RESET_CTL          8'h7b
//   `define     mLVDS2_2nd_reset_start       0 // Bit 12:0
//
//`define MLVDS2_DUAL_GATE_CTL_HI        8'h7c
//`define MLVDS2_DUAL_GATE_CTL_LO        8'h7d
//   `define     mlvds2_tcon_field_en        24 // Bit 7:0
//   `define     mlvds2_dual_gate_reserved   21 // Bit 2:0
//   `define     mlvds2_scan_mode_start_line_bit12 20 // Bit 0
//   `define     mlvds2_scan_mode_odd        16 // Bit 3:0
//   `define     mlvds2_scan_mode_even       12 // Bit 3:0
//   `define     mlvds2_scan_mode_start_line  0 // Bit 11:0
//
//`define MLVDS2_RESET_CONFIG_HI         8'h7e
//`define MLVDS2_RESET_CONFIG_LO         8'h7f
//   `define     mLVDS2_reset_range_enable   31 // Bit 0
//   `define     mLVDS2_reset_range_inv      30 // Bit 0
//   `define     mLVDS2_reset_config_res1    29 // Bit 0
//   `define     mLVDS2_reset_range_line_0   16 // Bit 11:0
//   `define     mLVDS2_reset_config_res3    13 // Bit 2:0
//   `define     mLVDS2_reset_range_line_1    0 // Bit 11:0
//
//**************************************************************************
//*  Vbyone registers  (Note: no MinLVDS in G9tv, share the register)
//**************************************************************************
#define VBO_CTRL_L                                 ((0x1460  << 2) + 0xff900000)
#define VBO_CTRL_H                                 ((0x1461  << 2) + 0xff900000)
#define VBO_SOFT_RST                               ((0x1462  << 2) + 0xff900000)
#define VBO_LANES                                  ((0x1463  << 2) + 0xff900000)
#define VBO_VIN_CTRL                               ((0x1464  << 2) + 0xff900000)
#define VBO_ACT_VSIZE                              ((0x1465  << 2) + 0xff900000)
#define VBO_REGION_00                              ((0x1466  << 2) + 0xff900000)
#define VBO_REGION_01                              ((0x1467  << 2) + 0xff900000)
#define VBO_REGION_02                              ((0x1468  << 2) + 0xff900000)
#define VBO_REGION_03                              ((0x1469  << 2) + 0xff900000)
#define VBO_VBK_CTRL_0                             ((0x146a  << 2) + 0xff900000)
#define VBO_VBK_CTRL_1                             ((0x146b  << 2) + 0xff900000)
#define VBO_HBK_CTRL                               ((0x146c  << 2) + 0xff900000)
#define VBO_PXL_CTRL                               ((0x146d  << 2) + 0xff900000)
#define VBO_LANE_SKEW_L                            ((0x146e  << 2) + 0xff900000)
#define VBO_LANE_SKEW_H                            ((0x146f  << 2) + 0xff900000)
#define VBO_GCLK_LANE_L                            ((0x1470  << 2) + 0xff900000)
#define VBO_GCLK_LANE_H                            ((0x1471  << 2) + 0xff900000)
#define VBO_GCLK_MAIN                              ((0x1472  << 2) + 0xff900000)
#define VBO_STATUS_L                               ((0x1473  << 2) + 0xff900000)
#define VBO_STATUS_H                               ((0x1474  << 2) + 0xff900000)
#define VBO_LANE_OUTPUT                            ((0x1475  << 2) + 0xff900000)
#define LCD_PORT_SWAP                              ((0x1476  << 2) + 0xff900000)
#define VBO_TMCHK_THRD_L                           ((0x1478  << 2) + 0xff900000)
#define VBO_TMCHK_THRD_H                           ((0x1479  << 2) + 0xff900000)
#define VBO_FSM_HOLDER_L                           ((0x147a  << 2) + 0xff900000)
#define VBO_FSM_HOLDER_H                           ((0x147b  << 2) + 0xff900000)
#define VBO_INTR_STATE_CTRL                        ((0x147c  << 2) + 0xff900000)
#define VBO_INTR_UNMASK                            ((0x147d  << 2) + 0xff900000)
#define VBO_TMCHK_HSYNC_STATE_L                    ((0x147e  << 2) + 0xff900000)
#define VBO_TMCHK_HSYNC_STATE_H                    ((0x147f  << 2) + 0xff900000)
#define VBO_TMCHK_VSYNC_STATE_L                    ((0x14f4  << 2) + 0xff900000)
#define VBO_TMCHK_VSYNC_STATE_H                    ((0x14f5  << 2) + 0xff900000)
#define VBO_TMCHK_VDE_STATE_L                      ((0x14f6  << 2) + 0xff900000)
#define VBO_TMCHK_VDE_STATE_H                      ((0x14f7  << 2) + 0xff900000)
#define VBO_INTR_STATE                             ((0x14f8  << 2) + 0xff900000)
#define VBO_INFILTER_CTRL                          ((0x14f9  << 2) + 0xff900000)
#define VBO_INSGN_CTRL                             ((0x14fa  << 2) + 0xff900000)
//**************************************************************************
//*  NOTE::    When Programming the Gamma, please turn off the IRQ service *
//**************************************************************************
#define GAMMA_CNTL_PORT                            ((0x1480  << 2) + 0xff900000)
   #define  GAMMA_VCOM_POL    7     //RW
   #define  GAMMA_RVS_OUT     6     //RW
   #define  ADR_RDY           5     //Read Only
   #define  WR_RDY            4     //Read Only
   #define  RD_RDY            3     //Read Only
   #define  GAMMA_TR          2     //RW
   #define  GAMMA_SET         1     //RW
   #define  GAMMA_EN          0     //RW
#define GAMMA_DATA_PORT                            ((0x1481  << 2) + 0xff900000)
#define GAMMA_ADDR_PORT                            ((0x1482  << 2) + 0xff900000)
   #define  H_RD              12
   #define  H_AUTO_INC        11
   #define  H_SEL_R           10
   #define  H_SEL_G           9
   #define  H_SEL_B           8
   #define  HADR_MSB          7            //7:0
   #define  HADR              0            //7:0
#define GAMMA_VCOM_HSWITCH_ADDR                    ((0x1483  << 2) + 0xff900000)
#define RGB_BASE_ADDR                              ((0x1485  << 2) + 0xff900000)
#define RGB_COEFF_ADDR                             ((0x1486  << 2) + 0xff900000)
#define POL_CNTL_ADDR                              ((0x1487  << 2) + 0xff900000)
   #define   DCLK_SEL             14    //FOR DCLK OUTPUT
   #define   TCON_VSYNC_SEL_DVI   11    //FOR RGB format DVI output
   #define   TCON_HSYNC_SEL_DVI   10    //FOR RGB format DVI output
   #define   TCON_DE_SEL_DVI      9     //FOR RGB format DVI output
   #define   CPH3_POL         8
   #define   CPH2_POL         7
   #define   CPH1_POL         6
   #define   TCON_DE_SEL      5
   #define   TCON_VS_SEL      4
   #define   TCON_HS_SEL      3
   #define   DE_POL           2
   #define   VS_POL           1
   #define   HS_POL           0
#define DITH_CNTL_ADDR                             ((0x1488  << 2) + 0xff900000)
   #define  DITH10_EN         10
   #define  DITH8_EN          9
   #define  DITH_MD           8
   #define  DITH10_CNTL_MSB   7          //7:4
   #define  DITH10_CNTL       4          //7:4
   #define  DITH8_CNTL_MSB    3          //3:0
   #define  DITH8_CNTL        0          //3:0
//Bit 1 highlight_en
//Bit 0 probe_en
#define GAMMA_PROBE_CTRL                           ((0x1489  << 2) + 0xff900000)
//read only
//Bit [15:0]  probe_color[15:0]
#define GAMMA_PROBE_COLOR_L                        ((0x148a  << 2) + 0xff900000)
//Read only
//Bit 15: if true valid probed color
//Bit [13:0]  probe_color[29:16]
#define GAMMA_PROBE_COLOR_H                        ((0x148b  << 2) + 0xff900000)
//bit 15:0, 5:6:5 color
#define GAMMA_PROBE_HL_COLOR                       ((0x148c  << 2) + 0xff900000)
//12:0 pos_x
#define GAMMA_PROBE_POS_X                          ((0x148d  << 2) + 0xff900000)
//12:0 pos_y
#define GAMMA_PROBE_POS_Y                          ((0x148e  << 2) + 0xff900000)
#define STH1_HS_ADDR                               ((0x1490  << 2) + 0xff900000)
#define STH1_HE_ADDR                               ((0x1491  << 2) + 0xff900000)
#define STH1_VS_ADDR                               ((0x1492  << 2) + 0xff900000)
#define STH1_VE_ADDR                               ((0x1493  << 2) + 0xff900000)
#define STH2_HS_ADDR                               ((0x1494  << 2) + 0xff900000)
#define STH2_HE_ADDR                               ((0x1495  << 2) + 0xff900000)
#define STH2_VS_ADDR                               ((0x1496  << 2) + 0xff900000)
#define STH2_VE_ADDR                               ((0x1497  << 2) + 0xff900000)
#define OEH_HS_ADDR                                ((0x1498  << 2) + 0xff900000)
#define OEH_HE_ADDR                                ((0x1499  << 2) + 0xff900000)
#define OEH_VS_ADDR                                ((0x149a  << 2) + 0xff900000)
#define OEH_VE_ADDR                                ((0x149b  << 2) + 0xff900000)
#define VCOM_HSWITCH_ADDR                          ((0x149c  << 2) + 0xff900000)
#define VCOM_VS_ADDR                               ((0x149d  << 2) + 0xff900000)
#define VCOM_VE_ADDR                               ((0x149e  << 2) + 0xff900000)
#define CPV1_HS_ADDR                               ((0x149f  << 2) + 0xff900000)
#define CPV1_HE_ADDR                               ((0x14a0  << 2) + 0xff900000)
#define CPV1_VS_ADDR                               ((0x14a1  << 2) + 0xff900000)
#define CPV1_VE_ADDR                               ((0x14a2  << 2) + 0xff900000)
#define CPV2_HS_ADDR                               ((0x14a3  << 2) + 0xff900000)
#define CPV2_HE_ADDR                               ((0x14a4  << 2) + 0xff900000)
#define CPV2_VS_ADDR                               ((0x14a5  << 2) + 0xff900000)
#define CPV2_VE_ADDR                               ((0x14a6  << 2) + 0xff900000)
#define STV1_HS_ADDR                               ((0x14a7  << 2) + 0xff900000)
#define STV1_HE_ADDR                               ((0x14a8  << 2) + 0xff900000)
#define STV1_VS_ADDR                               ((0x14a9  << 2) + 0xff900000)
#define STV1_VE_ADDR                               ((0x14aa  << 2) + 0xff900000)
#define STV2_HS_ADDR                               ((0x14ab  << 2) + 0xff900000)
#define STV2_HE_ADDR                               ((0x14ac  << 2) + 0xff900000)
#define STV2_VS_ADDR                               ((0x14ad  << 2) + 0xff900000)
#define STV2_VE_ADDR                               ((0x14ae  << 2) + 0xff900000)
#define OEV1_HS_ADDR                               ((0x14af  << 2) + 0xff900000)
#define OEV1_HE_ADDR                               ((0x14b0  << 2) + 0xff900000)
#define OEV1_VS_ADDR                               ((0x14b1  << 2) + 0xff900000)
#define OEV1_VE_ADDR                               ((0x14b2  << 2) + 0xff900000)
#define OEV2_HS_ADDR                               ((0x14b3  << 2) + 0xff900000)
#define OEV2_HE_ADDR                               ((0x14b4  << 2) + 0xff900000)
#define OEV2_VS_ADDR                               ((0x14b5  << 2) + 0xff900000)
#define OEV2_VE_ADDR                               ((0x14b6  << 2) + 0xff900000)
#define OEV3_HS_ADDR                               ((0x14b7  << 2) + 0xff900000)
#define OEV3_HE_ADDR                               ((0x14b8  << 2) + 0xff900000)
#define OEV3_VS_ADDR                               ((0x14b9  << 2) + 0xff900000)
#define OEV3_VE_ADDR                               ((0x14ba  << 2) + 0xff900000)
#define LCD_PWR_ADDR                               ((0x14bb  << 2) + 0xff900000)
   #define      LCD_VDD        5
   #define      LCD_VBL        4
   #define      LCD_GPI_MSB    3
   #define      LCD_GPIO       0
#define LCD_PWM0_LO_ADDR                           ((0x14bc  << 2) + 0xff900000)
#define LCD_PWM0_HI_ADDR                           ((0x14bd  << 2) + 0xff900000)
#define LCD_PWM1_LO_ADDR                           ((0x14be  << 2) + 0xff900000)
#define LCD_PWM1_HI_ADDR                           ((0x14bf  << 2) + 0xff900000)
#define INV_CNT_ADDR                               ((0x14c0  << 2) + 0xff900000)
   #define     INV_EN          4
   #define     INV_CNT_MSB     3
   #define     INV_CNT         0
#define TCON_MISC_SEL_ADDR                         ((0x14c1  << 2) + 0xff900000)
   #define     STH2_SEL        12
   #define     STH1_SEL        11
   #define     OEH_SEL         10
   #define     VCOM_SEL         9
   #define     DB_LINE_SW       8
   #define     CPV2_SEL         7
   #define     CPV1_SEL         6
   #define     STV2_SEL         5
   #define     STV1_SEL         4
   #define     OEV_UNITE        3
   #define     OEV3_SEL         2
   #define     OEV2_SEL         1
   #define     OEV1_SEL         0
#define DUAL_PORT_CNTL_ADDR                        ((0x14c2  << 2) + 0xff900000)
   #define     OUTPUT_YUV       15
   #define     DUAL_IDF         12   // 14:12
   #define     DUAL_ISF         9    // 11:9
   #define     LCD_ANALOG_SEL_CPH3   8
   #define     LCD_ANALOG_3PHI_CLK_SEL   7
   #define     LCD_LVDS_SEL54   6
   #define     LCD_LVDS_SEL27   5
   #define     LCD_TTL_SEL      4
   #define     DUAL_LVDC_EN     3
   #define     PORT_SWP         2
   #define     RGB_SWP          1
   #define     BIT_SWP          0
#define MLVDS_CONTROL                              ((0x14c3  << 2) + 0xff900000)
   #define     mLVDS_RESERVED  15    // 15
   #define     mLVDS_double_pattern  14    // 14
   #define     mLVDS_ins_reset  8    // 13:8  // each channel has one bit
   #define     mLVDS_dual_gate  7
   #define     mLVDS_bit_num    6    // 0-6Bits, 1-8Bits
   #define     mLVDS_pair_num   5    // 0-3Pairs, 1-6Pairs
   #define     mLVDS_msb_first  4
   #define     mLVDS_PORT_SWAP  3
   #define     mLVDS_MLSB_SWAP  2
   #define     mLVDS_PN_SWAP    1
   #define     mLVDS_en         0
#define MLVDS_RESET_PATTERN_HI                     ((0x14c4  << 2) + 0xff900000)
#define MLVDS_RESET_PATTERN_LO                     ((0x14c5  << 2) + 0xff900000)
   #define     mLVDS_reset_pattern  0 // Bit 47:16
#define MLVDS_RESET_PATTERN_EXT                    ((0x14c6  << 2) + 0xff900000)
   #define     mLVDS_reset_pattern_ext  0 // Bit 15:0
#define MLVDS_CONFIG_HI                            ((0x14c7  << 2) + 0xff900000)
#define MLVDS_CONFIG_LO                            ((0x14c8  << 2) + 0xff900000)
   #define     mLVDS_reset_offset         29 // Bit 31:29
   #define     mLVDS_reset_length         23 // Bit 28:23
   #define     mLVDS_config_reserved      20 // Bit 22:20
   #define     mLVDS_reset_start_bit12    19 // Bit 19
   #define     mLVDS_data_write_toggle    18
   #define     mLVDS_data_write_ini       17
   #define     mLVDS_data_latch_1_toggle  16
   #define     mLVDS_data_latch_1_ini     15
   #define     mLVDS_data_latch_0_toggle  14
   #define     mLVDS_data_latch_0_ini     13
   #define     mLVDS_reset_1_select       12 // 0 - same as reset_0, 1 - 1 clock delay of reset_0
   #define     mLVDS_reset_start           0 // Bit 11:0
#define TCON_DOUBLE_CTL                            ((0x14c9  << 2) + 0xff900000)
   #define     tcon_double_ini          8 // Bit 7:0
   #define     tcon_double_inv          0 // Bit 7:0
#define TCON_PATTERN_HI                            ((0x14ca  << 2) + 0xff900000)
#define TCON_PATTERN_LO                            ((0x14cb  << 2) + 0xff900000)
   #define     tcon_pattern_loop_data     16 // Bit 15:0
   #define     tcon_pattern_loop_start    12 // Bit 3:0
   #define     tcon_pattern_loop_end       8 // Bit 3:0
   #define     tcon_pattern_enable         0 // Bit 7:0
#define TCON_CONTROL_HI                            ((0x14cc  << 2) + 0xff900000)
#define TCON_CONTROL_LO                            ((0x14cd  << 2) + 0xff900000)
   #define     tcon_pclk_enable           26 // Bit 5:0 (enable pclk on TCON channel 7 to 2)
   #define     tcon_pclk_div              24 // Bit 1:0 (control phy clok divide 2,4,6,8)
   #define     tcon_delay                  0 // Bit 23:0 (3 bit for each channel)
#define LVDS_BLANK_DATA_HI                         ((0x14ce  << 2) + 0xff900000)
#define LVDS_BLANK_DATA_LO                         ((0x14cf  << 2) + 0xff900000)
   #define     LVDS_blank_data_reserved 30  // 31:30
   #define     LVDS_blank_data_r        20  // 29:20
   #define     LVDS_blank_data_g        10  // 19:10
   #define     LVDS_blank_data_b         0  //  9:0
#define LVDS_PACK_CNTL_ADDR                        ((0x14d0  << 2) + 0xff900000)
   #define     LVDS_USE_TCON    7
   #define     LVDS_DUAL        6
   #define     PN_SWP           5
   #define     LSB_FIRST        4
   #define     LVDS_RESV        3
   #define     ODD_EVEN_SWP     2
   #define     LVDS_REPACK      0
// New from M3 :
// Bit 15:12 -- Enable OFFSET Double Generate(TOCN7-TCON4)
// Bit 11:0 -- de_hs(old tcon) second offset_hs (new tcon)
#define DE_HS_ADDR                                 ((0x14d1  << 2) + 0xff900000)
// New from M3 :
// Bit 15:12 -- Enable OFFSET Double Generate(TOCN3-TCON0)
#define DE_HE_ADDR                                 ((0x14d2  << 2) + 0xff900000)
#define DE_VS_ADDR                                 ((0x14d3  << 2) + 0xff900000)
#define DE_VE_ADDR                                 ((0x14d4  << 2) + 0xff900000)
#define HSYNC_HS_ADDR                              ((0x14d5  << 2) + 0xff900000)
#define HSYNC_HE_ADDR                              ((0x14d6  << 2) + 0xff900000)
#define HSYNC_VS_ADDR                              ((0x14d7  << 2) + 0xff900000)
#define HSYNC_VE_ADDR                              ((0x14d8  << 2) + 0xff900000)
#define VSYNC_HS_ADDR                              ((0x14d9  << 2) + 0xff900000)
#define VSYNC_HE_ADDR                              ((0x14da  << 2) + 0xff900000)
#define VSYNC_VS_ADDR                              ((0x14db  << 2) + 0xff900000)
#define VSYNC_VE_ADDR                              ((0x14dc  << 2) + 0xff900000)
// bit 8 -- vfifo_mcu_enable
// bit 7 -- halt_vs_de
// bit 6 -- R8G8B8_format
// bit 5 -- R6G6B6_format (round to 6 bits)
// bit 4 -- R5G6B5_format
// bit 3 -- dac_dith_sel
// bit 2 -- lcd_mcu_enable_de     -- ReadOnly
// bit 1 -- lcd_mcu_enable_vsync  -- ReadOnly
// bit 0 -- lcd_mcu_enable
#define LCD_MCU_CTL                                ((0x14dd  << 2) + 0xff900000)
// ReadOnly
//   R5G6B5 when R5G6B5_format
//   G8R8   when R8G8B8_format
//   G5R10  Other
#define LCD_MCU_DATA_0                             ((0x14de  << 2) + 0xff900000)
// ReadOnly
//   G8B8   when R8G8B8_format
//   G5B10  Other
#define LCD_MCU_DATA_1                             ((0x14df  << 2) + 0xff900000)
// LVDS
#define LVDS_GEN_CNTL                              ((0x14e0  << 2) + 0xff900000)
#define LVDS_PHY_CNTL0                             ((0x14e1  << 2) + 0xff900000)
#define LVDS_PHY_CNTL1                             ((0x14e2  << 2) + 0xff900000)
#define LVDS_PHY_CNTL2                             ((0x14e3  << 2) + 0xff900000)
#define LVDS_PHY_CNTL3                             ((0x14e4  << 2) + 0xff900000)
#define LVDS_PHY_CNTL4                             ((0x14e5  << 2) + 0xff900000)
#define LVDS_PHY_CNTL5                             ((0x14e6  << 2) + 0xff900000)
#define LVDS_SRG_TEST                              ((0x14e8  << 2) + 0xff900000)
#define LVDS_BIST_MUX0                             ((0x14e9  << 2) + 0xff900000)
#define LVDS_BIST_MUX1                             ((0x14ea  << 2) + 0xff900000)
#define LVDS_BIST_FIXED0                           ((0x14eb  << 2) + 0xff900000)
#define LVDS_BIST_FIXED1                           ((0x14ec  << 2) + 0xff900000)
#define LVDS_BIST_CNTL0                            ((0x14ed  << 2) + 0xff900000)
#define LVDS_CLKB_CLKA                             ((0x14ee  << 2) + 0xff900000)
#define LVDS_PHY_CLK_CNTL                          ((0x14ef  << 2) + 0xff900000)
#define LVDS_SER_EN                                ((0x14f0  << 2) + 0xff900000)
#define LVDS_PHY_CNTL6                             ((0x14f1  << 2) + 0xff900000)
#define LVDS_PHY_CNTL7                             ((0x14f2  << 2) + 0xff900000)
#define LVDS_PHY_CNTL8                             ((0x14f3  << 2) + 0xff900000)
//`define MLVDS_CLK_CTL0_HI        8'hf4
//`define MLVDS_CLK_CTL0_LO        8'hf5
//   `define     mlvds_clk_pattern_reserved 31 // Bit 31
//   `define     mpclk_dly                  28 // Bit 2:0
//   `define     mpclk_div                  26 // Bit 1:0 (control phy clok divide 2,4,6,8)
//   `define     use_mpclk                  25 // Bit 0
//   `define     mlvds_clk_half_delay       24 // Bit 0
//   `define     mlvds_clk_pattern           0 // Bit 23:0
//`define MLVDS_DUAL_GATE_WR_START        8'hf6
//   `define     mlvds_dual_gate_wr_start    0 // Bit 12:0
//`define MLVDS_DUAL_GATE_WR_END          8'hf7
//   `define     mlvds_dual_gate_wr_end      0 // Bit 12:0
//
//`define MLVDS_DUAL_GATE_RD_START        8'hf8
//   `define     mlvds_dual_gate_rd_start    0 // Bit 12:0
//`define MLVDS_DUAL_GATE_RD_END          8'hf9
//   `define     mlvds_dual_gate_rd_end      0 // Bit 12:0
//`define MLVDS_SECOND_RESET_CTL          8'hfa
//   `define     mLVDS_2nd_reset_start       0 // Bit 12:0
//
#define MLVDS_DUAL_GATE_CTL_HI                     ((0x14fb  << 2) + 0xff900000)
#define MLVDS_DUAL_GATE_CTL_LO                     ((0x14fc  << 2) + 0xff900000)
//   `define     mlvds_tcon_field_en        24 // Bit 7:0
//   `define     mlvds_dual_gate_reserved   21 // Bit 2:0
//   `define     mlvds_scan_mode_start_line_bit12 20 // Bit 0
//   `define     mlvds_scan_mode_odd        16 // Bit 3:0
//   `define     mlvds_scan_mode_even       12 // Bit 3:0
//   `define     mlvds_scan_mode_start_line  0 // Bit 11:0
//
//`define MLVDS_RESET_CONFIG_HI         8'hfd
//`define MLVDS_RESET_CONFIG_LO         8'hfe
//   `define     mLVDS_reset_range_enable   31 // Bit 0
//   `define     mLVDS_reset_range_inv      30 // Bit 0
//   `define     mLVDS_reset_config_res1    29 // Bit 0
//   `define     mLVDS_reset_range_line_0   16 // Bit 11:0
//   `define     mLVDS_reset_config_res3    13 // Bit 2:0
//   `define     mLVDS_reset_range_line_1    0 // Bit 11:0
//===============================================================
//LCD DRIVER BASE   END
//===============================================================
//
// Closing file:  lcd_regs.h
//
//`define MAD_VCBUS_BASE               8'h17
//
// Reading file:  mad_regs.h
//
//DEINTERLACE module start from 8'h90 end to 8'hff
// -----------------------------------------------
// CBUS_BASE:  MAD_VCBUS_BASE = 0x17
// -----------------------------------------------
#define DI_PRE_CTRL                                ((0x1700  << 2) + 0xff900000)
// bit 31,      cbus_pre_frame_rst
// bit 30,      cbus_pre_soft_rst
// bit 29,      pre_field_num
// bit 27:26,   mode_444c422
// bit 25,      di_cont_read_en
// bit 24:23,   mode_422c444
// bit 22,      mtn_after_nr
// bit 21:16,   pre_hold_fifo_lines
// bit 15,      nr_wr_by
// bit 14,      use_vdin_go_line
// bit 13,      di_prevdin_en
// bit 12,      di_pre_viu_link
// bit 11,      di_pre_repeat
// bit 10,      di_pre_drop_1st
// bit  9,      di_buf2_en
// bit  8,      di_chan2_en
// bit  7,      prenr_hist_en
// bit  6,      chan2_hist_en
// bit  5,      hist_check_en
// bit  4,      check_after_nr
// bit  3,      check222p_en
// bit  2,      check322p_en
// bit  1,      mtn_en
// bit  0,      nr_en
#define DI_POST_CTRL                               ((0x1701  << 2) + 0xff900000)
// bit 31,      cbus_post_frame_rst
// bit 30,      cbus_post_soft_rst
// bit 29,      post_field_num
// bit 21:16,   post_hold_fifo_lines
// bit 13,      prepost_link
// bit 12,      di_post_viu_link
// bit 11,      di_post_repeat
// bit 10,      di_post_drop_1st
// bit  9,      mif0_to_vpp_en
// bit  8,      di_vpp_out_en
// bit  7,      di_wr_bk_en
// bit  6,      di_mux_en
// bit  5,      di_blend_en
// bit  4,      di_mtnp_read_en
// bit  3,      di_mtn_buf_en
// bit  2,      di_ei_en
// bit  1,      di_buf1_en
// bit  0,      di_buf0_en
#define DI_POST_SIZE                               ((0x1702  << 2) + 0xff900000)
//bit 28:16,    vsize1post
//bit 12:0,     hsize1post
#define DI_PRE_SIZE                                ((0x1703  << 2) + 0xff900000)
//bit 28:16,    vsize1pre
//bit 12:0,     hsize1pre
#define DI_EI_CTRL0                                ((0x1704  << 2) + 0xff900000)
//bit 23:16,    ei0_filter[2:+]  abs_diff_left>filter && ...right>filter && ...top>filter && ...bot>filter -> filter
//bit 15:8,     ei0_threshold[2:+]
//bit 3,        ei0_vertical
//bit 2,        ei0_bpscf2
//bit 1,        ei0_bpsfar1
#define DI_EI_CTRL1                                ((0x1705  << 2) + 0xff900000)
//bit 31:24,    ei0_diff
//bit 23:16,    ei0_angle45
//bit 15:8,     ei0_peak
//bit 7:0,      ei0_cross
#define DI_EI_CTRL2                                ((0x1706  << 2) + 0xff900000)
//bit 31:24,    ei0_close2
//bit 23:16,    ei0_close1
//bit 15:8,     ei0_far2
//bit 7:0,      ei0_far1
#define DI_NR_CTRL0                                ((0x1707  << 2) + 0xff900000)
//bit 26,       nr_cue_en
//bit 25,       nr2_en
#define DI_NR_CTRL1                                ((0x1708  << 2) + 0xff900000)
//bit 31:30,    mot_p1txtcore_mode
//bit 29:24,    mot_p1txtcore_clmt
//bit 21:16,    mot_p1txtcore_ylmt
//bit 15:8,     mot_p1txtcore_crate
//bit 7:0,      mot_p1txtcore_yrate
#define DI_NR_CTRL2                                ((0x1709  << 2) + 0xff900000)
//bit 29:24,    mot_curtxtcore_clmt
//bit 21:16,    mot_curtxtcore_ylmt
//bit 15:8,     mot_curtxtcore_crate
//bit 7:0,      mot_curtxtcore_yrate
//`define DI_NR_CTRL3               8'h0a
//no use
//`define DI_MTN_CTRL               8'h0b
//no use
#define DI_CANVAS_URGENT0                          ((0x170a  << 2) + 0xff900000)
#define DI_CANVAS_URGENT1                          ((0x170b  << 2) + 0xff900000)
#define DI_MTN_CTRL1                               ((0x170c  << 2) + 0xff900000)
//bit 13 ,      me enable
//bit 12 ,      me autoenable
//bit 11:8,		mtn_paramtnthd
//bit 7:0,      mtn_parafltthd
#define DI_BLEND_CTRL                              ((0x170d  << 2) + 0xff900000)
//bit 31,      blend_1_en
//bit 30,      blend_mtn_lpf
//bit 28,      post_mb_en
//bit 27,      blend_mtn3p_max
//bit 26,      blend_mtn3p_min
//bit 25,      blend_mtn3p_ave
//bit 24,      blend_mtn3p_maxtb
//bit 23,      blend_mtn_flt_en
//bit 22,      blend_data_flt_en
//bit 21:20,   blend_top_mode
//bit 19,      blend_reg3_enable
//bit 18,      blend_reg2_enable
//bit 17,      blend_reg1_enable
//bit 16,      blend_reg0_enable
//bit 15:14,   blend_reg3_mode
//bit 13:12,   blend_reg2_mode
//bit 11:10,   blend_reg1_mode
//bit 9:8,     blend_reg0_mode
//bit 7:0,     kdeint
//`define DI_BLEND_CTRL1            8'h0e
//no use
#define DI_CANVAS_URGENT2                          ((0x170e  << 2) + 0xff900000)
//`define DI_BLEND_CTRL2            8'h0f
//no use
#define DI_ARB_CTRL                                ((0x170f  << 2) + 0xff900000)
//bit 31:26,			di_arb_thd1
//bit 25:20,			di_arb_thd0
//bit 19,			di_arb_tid_mode
//bit 18,			di_arb_arb_mode
//bit 17,			di_arb_acq_en
//bit 16,			di_arb_disable_clk
//bit 15:0,			di_arb_req_en
#define DI_BLEND_REG0_X                            ((0x1710  << 2) + 0xff900000)
//bit 27:16,   blend_reg0_startx
//bit 11:0,    blend_reg0_endx
#define DI_BLEND_REG0_Y                            ((0x1711  << 2) + 0xff900000)
#define DI_BLEND_REG1_X                            ((0x1712  << 2) + 0xff900000)
#define DI_BLEND_REG1_Y                            ((0x1713  << 2) + 0xff900000)
#define DI_BLEND_REG2_X                            ((0x1714  << 2) + 0xff900000)
#define DI_BLEND_REG2_Y                            ((0x1715  << 2) + 0xff900000)
#define DI_BLEND_REG3_X                            ((0x1716  << 2) + 0xff900000)
#define DI_BLEND_REG3_Y                            ((0x1717  << 2) + 0xff900000)
#define DI_CLKG_CTRL                               ((0x1718  << 2) + 0xff900000)
//bit 31:24,   pre_gclk_ctrl     no clk gate control. if ==1, module clk is not gated (always on). [3] for pulldown,[2] for mtn_1,[1] for mtn_0,[0] for nr
//bit 23:16,   post_gclk_ctrl    no clk gate control. [4] for ei_1, [3] for ei_0,[2] for ei_top, [1] for blend_1, [0] for blend_0
//bit 1,       di_gate_all       clk shut down. if ==1 , all di clock shut down
//bit 0,       di_no_clk_gate    no clk gate control.     if di_gated_all==0 and di_no_clk_gate ==1, all di clock is always working.
#define DI_EI_CTRL3                                ((0x1719  << 2) + 0xff900000)
//bit 31,      reg_ei_1
//bit 30,      reg_demon_en
//bit 26:24,   reg_demon_mux
//bit 23:20,   reg_right_win
//bit 19:16,   reg_left_win
//bit 7:4,     reg_ei_sadm_quatize_margin
//bit 1:0,     reg_ei_sad_relative_mode
#define DI_EI_CTRL4                                ((0x171a  << 2) + 0xff900000)
//bit 29,      reg_ei_caldrt_ambliike2_biasvertical
//bit 28:24,   reg_ei_caldrt_addxla2list_drtmax
//bit 22:20,   reg_ei_caldrt_addxla2list_signm0th
//bit 19,      reg_ei_caldrt_addxla2list_mode
//bit 18:16,   reg_ei_signm_sad_cor_rate
//bit 15:12,   reg_ei_signm_sadi_cor_rate
//bit 11:6,    reg_ei_signm_sadi_cor_ofst
//bit 5:0,     reg_ei_signm_sad_ofst
#define DI_EI_CTRL5                                ((0x171b  << 2) + 0xff900000)
//bit 30:28,   reg_ei_caldrt_cnflcctchk_frcverthrd
//bit 26:24,   reg_ei_caldrt_cnflctchk_mg
//bit 23:22,   reg_ei_caldrt_cnflctchk_ws
//bit 21,      reg_ei_caldrt_cnflctchk_en
//bit 20,      reg_ei_caldrt_verfrc_final_en
//bit 19,      reg_ei_caldrt_verfrc_retimflt_en
//bit 18:16,   reg_ei_caldrt_verftc_eithratemth
//bit 15,      reg_ei_caldrt_verfrc_retiming_en
//bit 14:12,   reg_ei_caldrt_verfrc_bothratemth
//bit 11:9,    reg_ei_caldrt_ver_thrd
//bit 8:4,     reg_ei_caldrt_addxla2list_drtmin
//bit 3:0,     reg_ei_caldrt_addxla2list_drtlimit
#define DI_EI_CTRL6                                ((0x171c  << 2) + 0xff900000)
//bit 31:24,   reg_ei_caldrt_abext_sad12thhig
//bit 23:16,   reg_ei_caldrt_abext_sad00thlow
//bit 15:8,    reg_ei_caldrt_abext_sad12thlow
//bit 6:4,     reg_ei_caldrt_abext_ratemth
//bit 2:0,     reg_ei_caldrt_abext_drtthrd
#define DI_EI_CTRL7                                ((0x171d  << 2) + 0xff900000)
//bit 29,      reg_ei_caldrt_xlanopeak_codien
//bit 28:24,   reg_ei_caldrt_xlanopeak_drtmax
//bit 23,      reg_ei_caldrt_xlanopeak_en
//bit 28:24,   reg_ei_caldrt_abext_monotrnd_alpha
//bit 28:24,   reg_ei_caldrt_abext_mononum12_thrd
//bit 28:24,   reg_ei_caldrt_abext_mononum00_thrd
//bit 28:24,   reg_ei_caldrt_abext_sad00rate
//bit 28:24,   reg_ei_caldrt_abext_sad12rate
//bit 28:24,   reg_ei_caldrt_abext_sad00thhig
#define DI_EI_CTRL8                                ((0x171e  << 2) + 0xff900000)
//bit 30:28,   reg_ei_assign_headtail_magin
//bit 26:24,   reg_ei_retime_lastcurpncnfltchk_mode
//bit 22:21,   reg_ei_retime_lastcurpncnfltchk_drtth
//bit 20,      reg_ei_caldrt_histchk_cnfid
//bit 19:16,   reg_ei_caldrt_histchk_thrd
//bit 15,      reg_ei_caldrt_histchk_abext
//bit 14,      reg_ei_caldrt_histchk_npen
//bit 13:11,   reg_ei_caldrt_amblike2_drtmg
//bit 10:8,    reg_ei_caldrt_amblike2_valmg
//bit 7:4,     reg_ei_caldrt_amblike2_alpha
//bit 3:0,     reg_ei_caldrt_amblike2_drtth
#define DI_EI_CTRL9                                ((0x171f  << 2) + 0xff900000)
//bit 31:28,   reg_ei_caldrt_hcnfcheck_frcvert_xla_th3
//bit 27,      reg_ei_caldrt_hcnfcheck_frcvert_xla_en
//bit 26:24,   reg_ei_caldrt_conf_drtth
//bit 23:20,   reg_ei_caldrt_conf_absdrtth
//bit 19:18,   reg_ei_caldrt_abcheck_mode1
//bit 17:16,   reg_ei_caldrt_abcheck_mode0
//bit 15:12,   reg_ei_caldrt_abcheck_drth1
//bit 11:8,    reg_ei_caldrt_abcheck_drth0
//bit 6:4,     reg_ei_caldrt_abpnchk1_th
//bit 1,       reg_ei_caldrt_abpnchk1_en
//bit 0,       reg_ei_caldrt_abpnchk0_en
// DEINTERLACE mode check.
#define DI_MC_REG0_X                               ((0x1720  << 2) + 0xff900000)
//bit 27:16,   mc_reg0_start_x
//bit 11:0,    mc_reg0_end_x
#define DI_MC_REG0_Y                               ((0x1721  << 2) + 0xff900000)
#define DI_MC_REG1_X                               ((0x1722  << 2) + 0xff900000)
#define DI_MC_REG1_Y                               ((0x1723  << 2) + 0xff900000)
#define DI_MC_REG2_X                               ((0x1724  << 2) + 0xff900000)
#define DI_MC_REG2_Y                               ((0x1725  << 2) + 0xff900000)
#define DI_MC_REG3_X                               ((0x1726  << 2) + 0xff900000)
#define DI_MC_REG3_Y                               ((0x1727  << 2) + 0xff900000)
#define DI_MC_REG4_X                               ((0x1728  << 2) + 0xff900000)
#define DI_MC_REG4_Y                               ((0x1729  << 2) + 0xff900000)
#define DI_MC_32LVL0                               ((0x172a  << 2) + 0xff900000)
//bit 31:24,   mc_reg2_32lvl
//bit 23:16,   mc_reg1_32lvl
//bit 15:8,    mc_reg0_32lvl
//bit 7:0,     field_32lvl
#define DI_MC_32LVL1                               ((0x172b  << 2) + 0xff900000)
//bit 15:8,    mc_reg3_32lvl
//bit 7:0,     mc_reg4_32lvl
#define DI_MC_22LVL0                               ((0x172c  << 2) + 0xff900000)
//bit 31:16,   mc_reg0_22lvl
//bit 15:0,    field_22lvl
#define DI_MC_22LVL1                               ((0x172d  << 2) + 0xff900000)
//bit 31:16,   mc_reg2_22lvl
//bit 15:0,    mc_reg1_22lvl
#define DI_MC_22LVL2                               ((0x172e  << 2) + 0xff900000)
//bit 31:16,   mc_reg4_22lvl
//bit 15:0,    mc_reg3_22lvl
#define DI_MC_CTRL                                 ((0x172f  << 2) + 0xff900000)
//bit 4,       mc_reg4_en
//bit 3,       mc_reg3_en
//bit 2,       mc_reg2_en
//bit 1,       mc_reg1_en
//bit 0,       mc_reg0_en
#define DI_INTR_CTRL                               ((0x1730  << 2) + 0xff900000)
#define DI_INFO_ADDR                               ((0x1731  << 2) + 0xff900000)
#define DI_INFO_DATA                               ((0x1732  << 2) + 0xff900000)
#define DI_PRE_HOLD                                ((0x1733  << 2) + 0xff900000)
//// DET 3D REG DEFINE BEGIN ////
//// 8'h34~8'h3f
//     `define DET3D_MOTN_CFG                8'h34
//     //Bit 16,	reg_det3d_intr_en	        Det3d interrupt enable
//     //Bit 9:8,	reg_Det3D_Motion_Mode	    U2  Different mode for Motion Calculation of Luma and Chroma:
//     //                                      0: MotY, 1: (2*MotY + (MotU + MotV))/4; 2: Max(MotY, MotU,MotV); 3:Max(MotY, (MotU+MotV)/2)
//     //Bit 7:4,	reg_Det3D_Motion_Core_Rate	U4  K Rate to Edge (HV) details for coring of Motion Calculations, normalized to 32
//     //Bit 3:0,	reg_Det3D_Motion_Core_Thrd	U4  2X: static coring value for Motion Detection.
//
//     `define DET3D_CB_CFG                  8'h35
//     //Bit 7:4,	reg_Det3D_ChessBd_NHV_ofst	U4,  Noise immune offset for NON-Horizotnal or vertical combing detection.
//     //Bit 3:0,	reg_Det3D_ChessBd_HV_ofst	U4,  Noise immune offset for Horizotnal or vertical combing detection.
//
//     `define DET3D_SPLT_CFG                8'h36
//     //Bit 7:4,	reg_Det3D_SplitValid_ratio	U4,  Ratio between max_value and the avg_value of the edge mapping for split line valid detection.
//     //                                      The smaller of this value, the easier of the split line detected.
//     //Bit 3:0,	reg_Det3D_AvgIdx_ratio	    U4,  Ratio to the avg_value of the edge mapping for split line position estimation.
//     //                                      The smaller of this value, the more samples will be added to the estimation.
//
//     `define DET3D_HV_MUTE                 8'h37
//     //Bit 23:20, reg_Det3D_Edge_Ver_Mute	U4  X2: Horizontal pixels to be mute from H/V Edge calculation Top and Bottom border part.
//     //Bit 19:16, reg_Det3D_Edge_Hor_Mute	U4  X2: Horizontal pixels to be mute from H/V Edge calculation Left and right border part.
//     //Bit 15:12, reg_Det3D_ChessBd_Ver_Mute	U4  X2: Horizontal pixels to be mute from ChessBoard statistics calculation in middle part
//     //Bit 11:8,	 reg_Det3D_ChessBd_Hor_Mute	U4  X2: Horizontal pixels to be mute from ChessBoard statistics calculation in middle part
//     //Bit 7:4,	 reg_Det3D_STA8X8_Ver_Mute	U4  1X: Vertical pixels to be mute from 8x8 statistics calculation in each block.
//     //Bit 3:0,	 reg_Det3D_STA8X8_Hor_Mute	U4  1X: Horizontal pixels to be mute from 8x8 statistics calculation in each block.
//
//     `define DET3D_MAT_STA_P1M1            8'h38
//     //Bit 31:24, reg_Det3D_STA8X8_P1_K0_R8	U8  SAD to SAI ratio to decide P1, normalized to 256 (0.8)
//     //Bit 23:16, reg_Det3D_STA8X8_P1_K1_R7	U8  SAD to ENG ratio to decide P1, normalized to 128 (0.5)
//     //Bit 15:8,	 reg_Det3D_STA8X8_M1_K0_R6	U8  SAD to SAI ratio to decide M1, normalized to 64  (1.1)
//     //Bit 7:0,	 reg_Det3D_STA8X8_M1_K1_R6	U8  SAD to ENG ratio to decide M1, normalized to 64  (0.8)
//
//     `define DET3D_MAT_STA_P1TH            8'h39
//     //Bit 23:16, reg_Det3D_STAYUV_P1_TH_L4	U8  SAD to ENG Thrd offset to decide P1, X16         (100)
//     //Bit 15:8,	 reg_Det3D_STAEDG_P1_TH_L4	U8  SAD to ENG Thrd offset to decide P1, X16         (80)
//     //Bit 7:0,	 reg_Det3D_STAMOT_P1_TH_L4	U8  SAD to ENG Thrd offset to decide P1, X16         (48)
//
//     `define DET3D_MAT_STA_M1TH            8'h3a
//     //Bit 23:16, reg_Det3D_STAYUV_M1_TH_L4	U8  SAD to ENG Thrd offset to decide M1, X16         (100)
//     //Bit 15:8,	 reg_Det3D_STAEDG_M1_TH_L4	U8  SAD to ENG Thrd offset to decide M1, X16         (80)
//     //Bit 7:0,	 reg_Det3D_STAMOT_M1_TH_L4	U8  SAD to ENG Thrd offset to decide M1, X16         (64)
//
//     `define DET3D_MAT_STA_RSFT            8'h3b
//     //Bit 5:4,	 reg_Det3D_STAYUV_RSHFT	    U2  YUV statistics SAD and SAI calculation result right shift bits to accommodate the 12bits clipping:
//     //                                      0: mainly for images <=720x480: 1: mainly for images <=1366x768: 2: mainly for images <=1920X1080: 2; 3: other higher resolutions
//     //Bit 3:2,	 reg_Det3D_STAEDG_RSHFT	    U2  Horizontal and Vertical Edge Statistics SAD and SAI calculation result right shift bits to accommodate the 12bits clipping:
//     //                                      0: mainly for images <=720x480: 1: mainly for images <=1366x768: 2: mainly for images <=1920X1080: 2; 3: other higher resolutions
//     //Bit 1:0,	 reg_Det3D_STAMOT_RSHFT	    U2  Motion SAD and SAI calculation result right shift bits to accommodate the 12bits clipping:
//     //                                      0: mainly for images <=720x480: 1: mainly for images <=1366x768: 2: mainly for images <=1920X1080: 2; 3: other higher resolutions
//
//     `define DET3D_MAT_SYMTC_TH            8'h3c
//     //Bit 31:24, reg_Det3D_STALUM_symtc_Th	  U8  threshold to decide if the Luma statistics is TB or LR symmetric.
//     //Bit 23:16, reg_Det3D_STACHR_symtc_Th	  U8  threshold to decide if the Chroma (UV) statistics is TB or LR symmetric.
//     //Bit 15:8,	 reg_Det3D_STAEDG_symtc_Th	  U8  threshold to decide if the Horizontal and Vertical Edge statistics is TB or LR symmetric.
//     //Bit 7:0,	 reg_Det3D_STAMOT_symtc_Th	  U8  threshold to decide if the Motion statistics is TB or LR symmetric.
//
//     `define DET3D_RO_DET_CB_HOR           8'h3d
//     //Bit 31:16, RO_Det3D_ChessBd_NHor_value    U16  X64: number of Pixels of Horizontally Surely NOT matching Chessboard pattern.
//     //Bit 15:0,	 RO_Det3D_ChessBd_Hor_value	    U16  X64: number of Pixels of Horizontally Surely matching Chessboard pattern.
//
//     `define DET3D_RO_DET_CB_VER           8'h3e
//     //Bit 31:16, RO_Det3D_ChessBd_NVer_value	U16  X64: number of Pixels of Vertically Surely NOT matching Chessboard pattern.
//     //Bit 15:0,	 RO_Det3D_ChessBd_Ver_value	    U16  X64: number of Pixels of Vertically Surely matching Chessboard pattern.
//
//     `define DET3D_RO_SPLT_HT              8'h3f
//     //Bit 24,	 RO_Det3D_Split_HT_valid	U1  horizontal LR split border detected valid signal for top half picture
//     //Bit 20:16, RO_Det3D_Split_HT_pxnum	U5  number of pixels included for the LR split position estimation for top half picture
//     //Bit 9:0,	 RO_Det3D_Split_HT_idxX4	S10  X4: horizontal pixel shifts of LR split position to the (ColMax/2) for top half picture
//
//     //// DET 3D REG DEFINE END ////
#define DI_MTN_1_CTRL1                             ((0x1740  << 2) + 0xff900000)
//bit 31,      mtn_1_en
//bit 30,      mtn_init
//bit 29,      di2nr_txt_en
//bit 28,      reserved
//bit 27:24,   mtn_def
//bit 23:16,   mtn_adp_yc
//bit 15:8,    mtn_adp_2c
//bit 7:0,     mtn_adp_2y
#define DI_MTN_1_CTRL2                             ((0x1741  << 2) + 0xff900000)
//bit 31:24,   mtn_ykinter
//bit 23:16,   mtn_ckinter
//bit 15:8,    mtn_ykintra
//bit  7:0,    mtn_ckintra
#define DI_MTN_1_CTRL3                             ((0x1742  << 2) + 0xff900000)
//bit 31:24,   mtn_tyrate
//bit 23:16,   mtn_tcrate
//bit 15: 8,   mtn_mxcmby
//bit  7: 0,   mtn_mxcmbc
#define DI_MTN_1_CTRL4                             ((0x1743  << 2) + 0xff900000)
//bit 31:24,   mtn_tcorey
//bit 23:16,   mtn_tcorec
//bit 15: 8,   mtn_minth
//bit  7: 0,   mtn_maxth
#define DI_MTN_1_CTRL5                             ((0x1744  << 2) + 0xff900000)
//bit 31:28,   mtn_m1b_extnd
//bit 27:24,   mtn_m1b_errod
//bit 21:20,   mtn_mot_txt_mode
//bit 19:18,   mtn_replace_cbyy
//bit 17:16,   mtn_replace_ybyc
//bit 15: 8,   mtn_core_ykinter
//bit  7: 0,   mtn_core_ckinter
//// NR2 REG DEFINE BEGIN////
#define NR2_MET_NM_CTRL                            ((0x1745  << 2) + 0xff900000)
//Bit 28,	   reg_NM_reset	          Reset to the status of the Loop filter.
//Bit 27:24,   reg_NM_calc_length	  Length mode of the Noise measurement sample number for statistics.
//                                    0:  256 samples;    1: 512 samples;    2: 1024 samples;   ¡­X: 2^(8+x) samples
//Bit 23:20,   reg_NM_inc_step	      Loop filter input gain increase step.
//Bit 19:16,   reg_NM_dec_step	      Loop filter input gain decrease step.
//Bit 15:8,	   reg_NM_YHPmot_thrd	  Luma channel HP portion motion for condition of pixels included in Luma Noise measurement.
//Bit 7:0,	   reg_NM_CHPmot_thrd	  Chroma channel HP portion motion for condition of pixels included in Chroma Noise measurement.
#define NR2_MET_NM_YCTRL                           ((0x1746  << 2) + 0xff900000)
//Bit 31:28,   reg_NM_YPLL_target	      Target rate of NM_Ynoise_thrd to mean of the Luma Noise
//Bit 27:24,   reg_NM_YLPmot_thrd	      Luma channel LP portion motion for condition of pixels included in Luma Noise measurement.
//Bit 23:16,   reg_NM_YHPmot_thrd_min	  Minimum threshold for Luma channel HP portion motion to decide whether the pixel will be included in Luma noise measurement.
//Bit 15:8,	   reg_NM_YHPmot_thrd_max	  Maximum threshold for Luma channel HP portion motion to decide whether the pixel will be included in Luma noise measurement.
//Bit 7:0,	   reg_NM_Ylock_rate	      Rate to decide whether the Luma noise measurement is lock or not.
#define NR2_MET_NM_CCTRL                           ((0x1747  << 2) + 0xff900000)
//Bit 31:28,	reg_NM_CPLL_target	     Target rate of NM_Cnoise_thrd to mean of the Chroma Noise
//Bit 27:24,	reg_NM_CLPmot_thrd	     Chroma channel LP portion motion for condition of pixels included in Chroma Noise measurement.
//Bit 23:16,	reg_NM_CHPmot_thrd_min	 Minimum threshold for Chroma channel HP portion motion to decide whether the pixel will be included in Chroma noise measurement.
//Bit 15:8,	    reg_NM_CHPmot_thrd_max	 Maximum threshold for Chroma channel HP portion motion to decide whether the pixel will be included in Chroma noise measurement.
//Bit 7:0,	    reg_NM_Clock_rate	     Rate to decide whether the Chroma noise measurement is lock or not;
#define NR2_MET_NM_TNR                             ((0x1748  << 2) + 0xff900000)
//Bit 25,	    ro_NM_TNR_Ylock	         Read-only register to tell ifLuma channel noise measurement is locked or not.
//Bit 24,	    ro_NM_TNR_Clock	         Read-only register to tell if Chroma channel noise measurement is locked or not.
//Bit 23:12,	ro_NM_TNR_Ylevel	     Read-only register to give Luma channel noise level. It was 16x of pixel difference in 8 bits of YHPmot.
//Bit 11:0,	ro_NM_TNR_Clevel	         Read-only register to give Chroma channel noise level. It was 16x of pixel difference in 8 bits of CHPmot.
#define NR2_MET_NMFRM_TNR_YLEV                     ((0x1749  << 2) + 0xff900000)
//Bit 28:0,	ro_NMFrm_TNR_Ylevel	         Frame based Read-only register to give Luma channel noise level within one frame/field.
#define NR2_MET_NMFRM_TNR_YCNT                     ((0x174a  << 2) + 0xff900000)
//Bit 23:0,	ro_NMFrm_TNR_Ycount	         Number ofLuma channel pixels included in Frame/Field based noise level measurement.
#define NR2_MET_NMFRM_TNR_CLEV                     ((0x174b  << 2) + 0xff900000)
//Bit 28:0,	ro_NMFrm_TNR_Clevel	         Frame based Read-only register to give Chroma channel noise level within one frame/field.
#define NR2_MET_NMFRM_TNR_CCNT                     ((0x174c  << 2) + 0xff900000)
//Bit 23:0,	ro_NMFrm_TNR_Ccount	         Number of Chroma channel pixels included in Frame/Field based noise level measurement.
#define NR2_3DEN_MODE                              ((0x174d  << 2) + 0xff900000)
//Bit 6:4,	Blend_3dnr_en_r
//Bit 2:0,	Blend_3dnr_en_l
//   `define NR2_IIR_CTRL                8'h4e
//   //Bit 15:14, reg_LP_IIR_8bit_mode	LP IIR membitwidth mode:0: 10bits will be store in memory;1: 9bits will be store in memory;
//   //                                  2: 8bits will be store in memory;3: 7bits will be store in memory;
//   //Bit 13:12, reg_LP_IIR_mute_mode	Mode for the LP IIR mute,
//   //Bit 11:8,	 reg_LP_IIR_mute_thrd	Threshold of LP IIR mute to avoid ghost:
//   //Bit 7:6,	 reg_HP_IIR_8bit_mode	IIR membitwidth mode:0: 10bits will be store in memory;1: 9bits will be store in memory;
//   //                                  2: 8bits will be store in memory;3: 7bits will be store in memory;
//   //Bit 5:4,	reg_HP_IIR_mute_mode	Mode for theLP IIR mute
//   //Bit 3:0,	reg_HP_IIR_mute_thrd	Threshold of HP IIR mute to avoid ghost
//   //
#define NR2_SW_EN                                  ((0x174f  << 2) + 0xff900000)
//Bit 17:8,	Clk_gate_ctrl
//Bit 7,	Cfr_enable
//Bit 5,	Det3d_en
//Bit 4,	Nr2_proc_en
//Bit 0,	Nr2_sw_en
#define NR2_FRM_SIZE                               ((0x1750  << 2) + 0xff900000)
//Bit 27:16,  Frm_heigh	Frame/field height
//Bit 11: 0,  Frm_width	Frame/field width
//   `define NR2_SNR_SAD_CFG             8'h51
//   //Bit 12,	reg_MATNR_SNR_SAD_CenRPL	U1, Enable signal for Current pixel position SAD to be replaced by SAD_min.0: do not replace Current pixel position SAD by SAD_min;1: do replacements
//   //Bit 11:8,	reg_MATNR_SNR_SAD_coring	Coring value of the intra-frame SAD. sum = (sum - reg_MATNR_SNR_SAD_coring);sum = (sum<0) ? 0: (sum>255)? 255: sum;
//   //Bit 6:5,	reg_MATNR_SNR_SAD_WinMod	Unsigned, Intra-frame SAD matching window mode:0: 1x1; 1: [1 1 1] 2: [1 2 1]; 3: [1 2 2 2 1];
//   //Bit 4:0,	Sad_coef_num	            Sad coeffient
//
//   `define NR2_MATNR_SNR_OS            8'h52
//   //Bit 7:4,	reg_MATNR_SNR_COS	    SNR Filter overshoot control margin for UV channel (X2 to u10 scale)
//   //Bit 3:0,	reg_MATNR_SNR_YOS	    SNR Filter overshoot control margin for luma channel (X2 to u10 scale)
//
//   `define NR2_MATNR_SNR_NRM_CFG       8'h53
//   //Bit 23:16,	reg_MATNR_SNR_NRM_ofst	Edge based SNR boosting normalization offset to SAD_max ;
//   //Bit 15:8,	    reg_MATNR_SNR_NRM_max	Edge based SNR boosting normalization Max value
//   //Bit 7:0,	    reg_MATNR_SNR_NRM_min	Edge based SNR boosting normalization Min value
//
//   `define NR2_MATNR_SNR_NRM_GAIN      8'h54
//   //Bit 15:8,	reg_MATNR_SNR_NRM_Cgain	Edge based SNR boosting normalization Gain for Chrm channel (norm 32 as 1)
//   //Bit 7:0,	reg_MATNR_SNR_NRM_Ygain	Edge based SNR boosting normalization Gain for Luma channel (norm 32 as 1)
//
//   `define NR2_MATNR_SNR_LPF_CFG       8'h55
//   //Bit 23:16,reg_MATNR_SNRLPF_SADmaxTH	U8,  Threshold to SADmax to use TNRLPF to replace SNRLPF. i.e.if (SAD_max<reg_MATNR_SNRLPF_SADmaxTH) SNRLPF_yuv[k] = TNRLPF_yuv[k];
//   //Bit 13:11,reg_MATNR_SNRLPF_Cmode	    LPF based SNR filtering mode on CHRM channel:
//   //                                      0: gradient LPF [1 1]/2, 1: gradient LPF [2 1 1]/4; 2: gradient LPF [3 3 2]/8; 3: gradient LPF [5 4 4 3]/16;
//   //                                      4: TNRLPF;  5 : CurLPF3x3_yuv[];  6: CurLPF3o3_yuv[]  7: CurLPF3x5_yuv[]
//   //Bit 10:8,	reg_MATNR_SNRLPF_Ymode	    LPF based SNR filtering mode on LUMA channel:
//   //                                      0: gradient LPF //Bit [1 1]/2, 1: gradient LPF [2 1 1]/4; 2: gradient LPF [3 3 2]/8;3: gradient LPF [5 4 4 3]/16;
//   //                                      4: TNRLPF;               5 : CurLPF3x3_yuv[];       6: CurLPF3o3_yuv[]         7: CurLPF3x5_yuv[]
//   //Bit 7:4,	reg_MATNR_SNRLPF_SADmin3TH	Offset threshold to SAD_min to Discard SAD_min3 corresponding pixel in LPF SNR filtering. (X8 to u8 scale)
//   //Bit 3:0,	reg_MATNR_SNRLPF_SADmin2TH	Offset threshold to SAD_min to Discard SAD_min2 corresponding pixel in LPF SNR filtering. (X8 to u8 scale)
//
//   `define NR2_MATNR_SNR_USF_GAIN      8'h56
//   //Bit 15:8,	reg_MATNR_SNR_USF_Cgain	    Un-sharp (HP) compensate back Chrm portion gain, (norm 64 as 1)
//   //Bit 7:0,	reg_MATNR_SNR_USF_Ygain	    Un-sharp (HP) compensate back Luma portion gain, (norm 64 as 1)
//
//   `define NR2_MATNR_SNR_EDGE2B        8'h57
//   //Bit 15:8,	reg_MATNR_SNR_Edge2Beta_ofst	U8,  Offset for Beta based on Edge.
//   //Bit 7:0,	reg_MATNR_SNR_Edge2Beta_gain	U8.  Gain to SAD_min for Beta based on Edge. (norm 16 as 1)
//
//   `define NR2_MATNR_BETA_EGAIN        8'h58
//   //Bit 15:8,	reg_MATNR_CBeta_Egain	U8,  Gain to Edge based Beta for Chrm channel. (normalized to 32 as 1)
//   //Bit 7:0,	reg_MATNR_YBeta_Egain	U8,  Gain to Edge based Beta for Luma channel. (normalized to 32 as 1)
//
//   `define NR2_MATNR_BETA_BRT          8'h59
//   //Bit 31:28,	reg_MATNR_beta_BRT_limt_hi	U4,  Beta adjustment based on Brightness high side Limit. (X16 to u8 scale)
//   //Bit 27:24,	reg_MATNR_beta_BRT_slop_hi	U4,  Beta adjustment based on Brightness high side slope. Normalized to 16 as 1
//   //Bit 23:16,	reg_MATNR_beta_BRT_thrd_hi	U8,  Beta adjustment based on Brightness high threshold.(u8 scale)
//   //Bit 15:12,	reg_MATNR_beta_BRT_limt_lo	U4,  Beta adjustment based on Brightness low side Limit. (X16 to u8 scale)
//   //Bit 11:8,	    reg_MATNR_beta_BRT_slop_lo	U4,  Beta adjustment based on Brightness low side slope. Normalized to 16 as 1
//   //Bit 7:0,	    reg_MATNR_beta_BRT_thrd_lo	U8,  Beta adjustment based on Brightness low threshold.(u8 scale)
//   `define NR2_MATNR_XBETA_CFG         8'h5a
//   //Bit 19:18,	reg_MATNR_CBeta_use_mode	U2,  Beta options (mux) from beta_motion and beta_edge for Chrm channel;
//   //Bit 17:16,	reg_MATNR_YBeta_use_mode	U2,  Beta options (mux) from beta_motion and beta_edge for Luma channel;
//   //Bit 15: 8,	reg_MATNR_CBeta_Ofst	    U8,  Offset to Beta for Chrm channel.(after beta_edge and beta_motion mux)
//   //Bit  7: 0,	reg_MATNR_YBeta_Ofst	    U8,  Offset to Beta for Luma channel.(after beta_edge and beta_motion mux)
//   `define NR2_MATNR_YBETA_SCL         8'h5b
//   //Bit 31:24,	reg_MATNR_YBeta_scale_min	U8,  Final step Beta scale low limit for Luma channel;
//   //Bit 23:16,	reg_MATNR_YBeta_scale_max	U8,  Final step Beta scale high limit for Luma channe;
//   //Bit 15: 8,	reg_MATNR_YBeta_scale_gain	U8,  Final step Beta scale Gain for Luma channel (normalized 32 to 1);
//   //Bit 7 : 0,	reg_MATNR_YBeta_scale_ofst	S8,  Final step Beta scale offset for Luma channel ;
//   `define NR2_MATNR_CBETA_SCL         8'h5c
//   //Bit 31:24,	reg_MATNR_CBeta_scale_min	Final step Beta scale low limit for Chrm channel.Similar to Y
//   //Bit 23:16,	reg_MATNR_CBeta_scale_max	U8,  Final step Beta scale high limit for Chrm channel.Similar to Y
//   //Bit 15: 8,	reg_MATNR_CBeta_scale_gain	U8,  Final step Beta scale Gain for Chrm channel Similar to Y
//   //Bit  7: 0,	reg_MATNR_CBeta_scale_ofst	S8,  Final step Beta scale offset for Chrm channel Similar to Y
//   `define NR2_SNR_MASK                8'h5d
//   //Bit 20:0, 	SAD_MSK	                    Valid signal in the 3x7 SAD surface
//   `define NR2_SAD2NORM_LUT0           8'h5e
//   //Bit 31:24,	reg_MATNR_SAD2Norm_LUT_3	SAD convert normal LUT node 3
//   //Bit 23:16,	reg_MATNR_SAD2Norm_LUT_2	SAD convert normal LUT node 2
//   //Bit 15: 8,	reg_MATNR_SAD2Norm_LUT_1	SAD convert normal LUT node 1
//   //Bit  7: 0,	reg_MATNR_SAD2Norm_LUT_0	SAD convert normal LUT node 0
//   `define NR2_SAD2NORM_LUT1           8'h5f
//   //Bit 31:24,	reg_MATNR_SAD2Norm_LUT_7	SAD convert normal LUT node 7
//   //Bit 23:16,	reg_MATNR_SAD2Norm_LUT_6	SAD convert normal LUT node 6
//   //Bit 15: 8,	reg_MATNR_SAD2Norm_LUT_5	SAD convert normal LUT node 5
//   //Bit  7: 0,	reg_MATNR_SAD2Norm_LUT_4	SAD convert normal LUT node 4
//   `define NR2_SAD2NORM_LUT2           8'h60
//   //Bit 31:24,	reg_MATNR_SAD2Norm_LUT_11	SAD convert normal LUT node 11
//   //Bit 23:16,	reg_MATNR_SAD2Norm_LUT_10	SAD convert normal LUT node 10
//   //Bit 15: 8,	reg_MATNR_SAD2Norm_LUT_9	SAD convert normal LUT node 9
//   //Bit  7: 0,	reg_MATNR_SAD2Norm_LUT_8	SAD convert normal LUT node 8
//   `define NR2_SAD2NORM_LUT3           8'h61
//   //Bit 31:24,	reg_MATNR_SAD2Norm_LUT_15	SAD convert normal LUT node 15
//   //Bit 23:16,	reg_MATNR_SAD2Norm_LUT_14	SAD convert normal LUT node 14
//   //Bit 15:8,	reg_MATNR_SAD2Norm_LUT_13	SAD convert normal LUT node 13
//   //Bit 7:0,	reg_MATNR_SAD2Norm_LUT_12	SAD convert normal LUT node 12
//   `define NR2_EDGE2BETA_LUT0          8'h62
//   //Bit 31:24,	reg_MATNR_Edge2Beta_LUT_3	Edge convert beta LUT node 3
//   //Bit 23:16,	reg_MATNR_Edge2Beta_LUT_2	Edge convert beta LUT node 2
//   //Bit 15: 8,	reg_MATNR_Edge2Beta_LUT_1	Edge convert beta LUT node 1
//   //Bit  7: 0,	reg_MATNR_Edge2Beta_LUT_0	Edge convert beta LUT node 0
//   `define NR2_EDGE2BETA_LUT1          8'h63
//   //Bit 31:24,	reg_MATNR_Edge2Beta_LUT_7	Edge convert beta LUT node 7
//   //Bit 23:16,	reg_MATNR_Edge2Beta_LUT_6	Edge convert beta LUT node 6
//   //Bit 15: 8,	reg_MATNR_Edge2Beta_LUT_5	Edge convert beta LUT node 5
//   //Bit  7: 0,	reg_MATNR_Edge2Beta_LUT_4	Edge convert beta LUT node 4
//   `define NR2_EDGE2BETA_LUT2          8'h64
//   //Bit 31:24,	reg_MATNR_Edge2Beta_LUT_11	Edge convert beta LUT node 11
//   //Bit 23:16,	reg_MATNR_Edge2Beta_LUT_10	Edge convert beta LUT node 10
//   //Bit 15: 8,	reg_MATNR_Edge2Beta_LUT_9	Edge convert beta LUT node 9
//   //Bit  7: 0,	reg_MATNR_Edge2Beta_LUT_8	Edge convert beta LUT node 8
//   `define NR2_EDGE2BETA_LUT3          8'h65
//   //Bit 31:24,	reg_MATNR_Edge2Beta_LUT_15	Edge convert beta LUT node 15
//   //Bit 23:16,	reg_MATNR_Edge2Beta_LUT_14	Edge convert beta LUT node 14
//   //Bit 15: 8,	reg_MATNR_Edge2Beta_LUT_13	Edge convert beta LUT node 13
//   //Bit  7: 0,	reg_MATNR_Edge2Beta_LUT_12	Edge convert beta LUT node 12
//   `define NR2_MOTION2BETA_LUT0        8'h66
//   //Bit 31:24,	reg_MATNR_Mot2Beta_LUT_3	Motion convert beta LUT node 3
//   //Bit 23:16,	reg_MATNR_Mot2Beta_LUT_2	Motion convert beta LUT node 2
//   //Bit 15: 8,	reg_MATNR_Mot2Beta_LUT_1	Motion convert beta LUT node 1
//   //Bit  7: 0,	reg_MATNR_Mot2Beta_LUT_0	Motion convert beta LUT node 0
//   `define NR2_MOTION2BETA_LUT1        8'h67
//   //Bit 31:24,	reg_MATNR_Mot2Beta_LUT_7	Motion convert beta LUT node 7
//   //Bit 23:16,	reg_MATNR_Mot2Beta_LUT_6	Motion convert beta LUT node 6
//   //Bit 15: 8,	reg_MATNR_Mot2Beta_LUT_5	Motion convert beta LUT node 5
//   //Bit  7: 0,	reg_MATNR_Mot2Beta_LUT_4	Motion convert beta LUT node 4
//   `define NR2_MOTION2BETA_LUT2        8'h68
//   //Bit 31:24,	reg_MATNR_Mot2Beta_LUT_11	Motion convert beta LUT node 11
//   //Bit 23:16,	reg_MATNR_Mot2Beta_LUT_10	Motion convert beta LUT node 10
//   //Bit 15: 8,	reg_MATNR_Mot2Beta_LUT_9	Motion convert beta LUT node 9
//   //Bit  7: 0,	reg_MATNR_Mot2Beta_LUT_8	Motion convert beta LUT node 8
//   `define NR2_MOTION2BETA_LUT3        8'h69
//   //Bit 31:24,	reg_MATNR_Mot2Beta_LUT_15	Motion convert beta LUT node 15
//   //Bit 23:16,	reg_MATNR_Mot2Beta_LUT_14	Motion convert beta LUT node 14
//   //Bit 15: 8,	reg_MATNR_Mot2Beta_LUT_13	Motion convert beta LUT node 13
//   //Bit  7: 0,	reg_MATNR_Mot2Beta_LUT_12	Motion convert beta LUT node 12
//    `define NR2_MATNR_MTN_CRTL          8'h6a
//    //Bit 25:24,	reg_MATNR_Vmtn_use_mode	    Motion_yuvV channel motion selection mode:0: Vmot;1:Ymot/2 + (Umot+Vmot)/4; 2:Ymot/2 + max(Umot,Vmot)/2; 3: max(Ymot,Umot, Vmot)
//    //Bit 21:20,	reg_MATNR_Umtn_use_mode	    Motion_yuvU channel motion selection mode:0:Umot;1:Ymot/2 + (Umot+Vmot)/4; 2:Ymot/2 + max(Umot,Vmot)/2; 3: max(Ymot,Umot, Vmot)
//    //Bit 17:16,	reg_MATNR_Ymtn_use_mode	    Motion_yuvLuma channel motion selection mode:0:  Ymot, 1: Ymot/2 + (Umot+Vmot)/4; 2: Ymot/2 + max(Umot,Vmot)/2; 3:  max(Ymot,Umot, Vmot)
//    //Bit 13:12,	reg_MATNR_mtn_txt_mode	    Texture detection mode for adaptive coring of HP motion
//    //Bit  9: 8,	reg_MATNR_mtn_cor_mode	    Coring selection mode based on texture detection;
//    //Bit  6: 4,	reg_MATNR_mtn_hpf_mode	    video mode of current and previous frame/field for MotHPF_yuv[k] calculation:
//    //Bit  2: 0,	reg_MATNR_mtn_lpf_mode	    LPF video mode of current and previous frame/field for MotLPF_yuv[k] calculation:
//    `define NR2_MATNR_MTN_CRTL2         8'h6b
//    //Bit 18:16,	reg_MATNR_iir_BS_Ymode	    IIR TNR filter Band split filter mode for Luma LPF result generation (Cur and Prev);
//    //Bit 15: 8,	reg_MATNR_mtnb_alpLP_Cgain	Scale of motion_brthp_uv to motion_brtlp_uv, normalized to 32 as 1
//    //Bit  7: 0,	reg_MATNR_mtnb_alpLP_Ygain	Scale of motion_brthp_y to motion_brtlp_y, normalized to 32 as 1
//    `define NR2_MATNR_MTN_COR           8'h6c
//    //Bit 15:12,	reg_MATNR_mtn_cor_Cofst	    Coring Offset for Chroma Motion.
//    //Bit 11: 8,	reg_MATNR_mtn_cor_Cgain	    Gain to texture based coring for Chroma Motion. Normalized to 16 as 1
//    //Bit  7: 4,	reg_MATNR_mtn_cor_Yofst	    Coring Offset for Luma Motion.
//    //Bit  3: 0,	reg_MATNR_mtn_cor_Ygain	    Gain to texture based coring for Luma Motion. Normalized to 16 as 1
//    `define NR2_MATNR_MTN_GAIN          8'h6d
//    //Bit 31:24,	reg_MATNR_mtn_hp_Cgain	Gain to MotHPF_yuv[k] Chrm channel for motion calculation, normalized to 64 as 1
//    //Bit 23:16,	reg_MATNR_mtn_hp_Ygain	Gain to MotHPF_yuv[k] Luma channel for motion calculation, normalized to 64 as 1
//    //Bit 15: 8,	reg_MATNR_mtn_lp_Cgain	Gain to MotLPF_yuv[k] Chrm channel for motion calculation, normalized to 32 as 1
//    //Bit  7: 0,	reg_MATNR_mtn_lp_Ygain	Gain to MotLPF_yuv[k] Luma channel for motion calculation, normalized to 32 as 1
//    `define NR2_MATNR_DEGHOST           8'h6e
//    //Bit 8,	reg_MATNR_DeGhost_En	Enable signal for DeGhost function:0: disable; 1: enable
//    //Bit 7:4,	reg_MATNR_DeGhost_COS	DeGhost Overshoot margin for UV channel, (X2 to u10 scale)
//    //Bit 3:0,	reg_MATNR_DeGhost_YOS	DeGhost Overshoot margin for Luma channel, (X2 to u10 scale)
//
//    `define NR2_MATNR_ALPHALP_LUT0      8'h6f
//    //Bit 31:24,	reg_MATNR_AlphaLP_LUT_3	    Matnr low-pass filter alpha LUT node 3
//    //Bit 23:16,	reg_MATNR_AlphaLP_LUT_2	    Matnr low-pass filter alpha LUT node 2
//    //Bit 15: 8,	reg_MATNR_AlphaLP_LUT_1	    Matnr low-pass filter alpha LUT node 1
//    //Bit  7: 0,	reg_MATNR_AlphaLP_LUT_0	    Matnr low-pass filter alpha LUT node 0
//    `define NR2_MATNR_ALPHALP_LUT1      8'h70
//    //Bit 31:24,	reg_MATNR_AlphaLP_LUT_7	    Matnr low-pass filter alpha LUT node 7
//    //Bit 23:16,	reg_MATNR_AlphaLP_LUT_6	    Matnr low-pass filter alpha LUT node 6
//    //Bit 15: 8,	reg_MATNR_AlphaLP_LUT_5	    Matnr low-pass filter alpha LUT node 5
//    //Bit  7: 0,	reg_MATNR_AlphaLP_LUT_4	    Matnr low-pass filter alpha LUT node 4
//    `define NR2_MATNR_ALPHALP_LUT2      8'h71
//    //Bit 31:24,	reg_MATNR_AlphaLP_LUT_11	Matnr low-pass filter alpha LUT node 11
//    //Bit 23:16,	reg_MATNR_AlphaLP_LUT_10	Matnr low-pass filter alpha LUT node 10
//    //Bit 15: 8,	reg_MATNR_AlphaLP_LUT_9	    Matnr low-pass filter alpha LUT node 9
//    //Bit  7: 0,	reg_MATNR_AlphaLP_LUT_8	    Matnr low-pass filter alpha LUT node 8
//    `define NR2_MATNR_ALPHALP_LUT3      8'h72
//    //Bit 31:24,	reg_MATNR_AlphaLP_LUT_15	Matnr low-pass filter alpha LUT node 15
//    //Bit 23:16,	reg_MATNR_AlphaLP_LUT_14	Matnr low-pass filter alpha LUT node 14
//    //Bit 15: 8,	reg_MATNR_AlphaLP_LUT_13	Matnr low-pass filter alpha LUT node 13
//    //Bit  7: 0,	reg_MATNR_AlphaLP_LUT_12	Matnr low-pass filter alpha LUT node 12
//    `define NR2_MATNR_ALPHAHP_LUT0      8'h73
//    //Bit 31:24,	reg_MATNR_AlphaHP_LUT_3	    Matnr high-pass filter alpha LUT node 3
//    //Bit 23:16,	reg_MATNR_AlphaHP_LUT_2	    Matnr high-pass filter alpha LUT node 2
//    //Bit 15: 8,	reg_MATNR_AlphaHP_LUT_1	    Matnr high-pass filter alpha LUT node 1
//    //Bit  7: 0,	reg_MATNR_AlphaHP_LUT_0	    Matnr high-pass filter alpha LUT node 0
//    `define NR2_MATNR_ALPHAHP_LUT1      8'h74
//    //Bit 31:24,	reg_MATNR_AlphaHP_LUT_7	    Matnr high-pass filter alpha LUT node 7
//    //Bit 23:16,	reg_MATNR_AlphaHP_LUT_6	    Matnr high-pass filter alpha LUT node 6
//    //Bit 15: 8,	reg_MATNR_AlphaHP_LUT_5	    Matnr high-pass filter alpha LUT node 5
//    //Bit  7: 0,	reg_MATNR_AlphaHP_LUT_4	    Matnr high-pass filter alpha LUT node 4
//    `define NR2_MATNR_ALPHAHP_LUT2      8'h75
//    //Bit 31:24,	reg_MATNR_AlphaHP_LUT_11	Matnr high-pass filter alpha LUT node 11
//    //Bit 23:16,	reg_MATNR_AlphaHP_LUT_10	Matnr high-pass filter alpha LUT node 10
//    //Bit 15: 8,	reg_MATNR_AlphaHP_LUT_9	    Matnr high-pass filter alpha LUT node 9
//    //Bit  7: 0,	reg_MATNR_AlphaHP_LUT_8	    Matnr high-pass filter alpha LUT node 8
//    `define NR2_MATNR_ALPHAHP_LUT3      8'h76
//    //Bit 31:24,	reg_MATNR_AlphaHP_LUT_15	Matnr high-pass filter alpha LUT node 15
//    //Bit 23:16,	reg_MATNR_AlphaHP_LUT_14	Matnr high-pass filter alpha LUT node 14
//    //Bit 15: 8,	reg_MATNR_AlphaHP_LUT_13	Matnr high-pass filter alpha LUT node 13
//    //Bit  7: 0,	reg_MATNR_AlphaHP_LUT_12	Matnr high-pass filter alpha LUT node 12
//
//    `define NR2_MATNR_MTNB_BRT          8'h77
//    //Bit 31:28,	reg_MATNR_mtnb_BRT_limt_hi	Motion adjustment based on Brightness high side Limit. (X16 to u8 scale)
//    //Bit 27:24,	reg_MATNR_mtnb_BRT_slop_hi	Motion adjustment based on Brightness high side slope. Normalized to 16 as 1
//    //Bit 23:16,	reg_MATNR_mtnb_BRT_thrd_hi	Motion adjustment based on Brightness high threshold.(u8 scale)
//    //Bit 15:12,	reg_MATNR_mtnb_BRT_limt_lo	Motion adjustment based on Brightness low side Limit. (X16 to u8 scale)
//    //Bit 11: 8,	reg_MATNR_mtnb_BRT_slop_lo	Motion adjustment based on Brightness low side slope. Normalized to 16 as 1
//    //Bit  7: 0,	reg_MATNR_mtnb_BRT_thrd_lo	Motion adjustment based on Brightness low threshold.(u8 scale)
// 0x51 - 0x69 | 0x4e | 0x6a - 0x77
//
// Reading file:  nr2_regs.h
//
// synopsys translate_off
// synopsys translate_on
//========== nr2_snr_regs register begin ==========//
#define NR2_SNR_SAD_CFG                            ((0x1751  << 2) + 0xff900000)
//Bit 31:13        reserved
//Bit 12           reg_matnr_snr_sad_cenrpl       // unsigned , default = 1
//Bit 11: 8        reg_matnr_snr_sad_coring       // unsigned , default = 3
//Bit  7            reserved
//Bit  6: 5        reg_matnr_snr_sad_winmod       // unsigned , default = 1     0: 1x1; 1: [1 1 1] 2: [1 2 1]; 3: [1 2 2 2 1];
//Bit  4: 0        sad_coef_num                      // unsigned , default = 1     0: 1x1; 1: [1 1 1] 2: [1 2 1]; 3: [1 2 2 2 1];
#define NR2_MATNR_SNR_OS                           ((0x1752  << 2) + 0xff900000)
//Bit 31: 8        reserved
//Bit  7: 4        reg_matnr_snr_cos              // unsigned , default = 8
//Bit  3: 0        reg_matnr_snr_yos              // unsigned , default = 13
#define NR2_MATNR_SNR_NRM_CFG                      ((0x1753  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:16        reg_matnr_snr_nrm_ofst         // signed , default = 64
//Bit 15: 8        reg_matnr_snr_nrm_max          // unsigned , default = 255
//Bit  7: 0        reg_matnr_snr_nrm_min          // unsigned , default = 0
#define NR2_MATNR_SNR_NRM_GAIN                     ((0x1754  << 2) + 0xff900000)
//Bit 31:16        reserved
//Bit 15: 8        reg_matnr_snr_nrm_cgain        // unsigned , default = 0     norm 32
//Bit  7: 0        reg_matnr_snr_nrm_ygain        // unsigned , default = 32    norm 32
#define NR2_MATNR_SNR_LPF_CFG                      ((0x1755  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:16        reg_matnr_snrlpf_sadmaxth      // unsigned , default = 12
//Bit 15:14        reserved
//Bit 13:11        reg_matnr_snrlpf_cmode         // unsigned , default = 2     0: gradient LPF [1 1]/2, 1: gradient LPF [2 1 1]/4; 2: gradient LPF [3 3 2]/8; 3: gradient LPF [5 5 4 3]/16;
//Bit 10: 8        reg_matnr_snrlpf_ymode         // unsigned , default = 2     0: gradient LPF [1 1]/2, 1: gradient LPF [2 1 1]/4; 2: gradient LPF [3 3 2]/8; 3: gradient LPF [5 5 4 3]/16;
//Bit  7: 4        reg_matnr_snrlpf_sadmin3th     // unsigned , default = 6     X8
//Bit  3: 0        reg_matnr_snrlpf_sadmin2th     // unsigned , default = 4     X8
#define NR2_MATNR_SNR_USF_GAIN                     ((0x1756  << 2) + 0xff900000)
//Bit 31:16        reserved
//Bit 15: 8        reg_matnr_snr_usf_cgain        // unsigned , default = 0     norm 64
//Bit  7: 0        reg_matnr_snr_usf_ygain        // unsigned , default = 0     norm 64
#define NR2_MATNR_SNR_EDGE2B                       ((0x1757  << 2) + 0xff900000)
//Bit 31:16        reserved
//Bit 15: 8        reg_matnr_snr_edge2beta_ofst   // unsigned , default = 128
//Bit  7: 0        reg_matnr_snr_edge2beta_gain   // unsigned , default = 16
#define NR2_MATNR_BETA_EGAIN                       ((0x1758  << 2) + 0xff900000)
//Bit 31:16        reserved
//Bit 15: 8        reg_matnr_cbeta_egain          // unsigned , default = 32    normalized to 32
//Bit  7: 0        reg_matnr_ybeta_egain          // unsigned , default = 32    normalized to 32
#define NR2_MATNR_BETA_BRT                         ((0x1759  << 2) + 0xff900000)
//Bit 31:28        reg_matnr_beta_brt_limt_hi     // unsigned , default = 0
//Bit 27:24        reg_matnr_beta_brt_slop_hi     // unsigned , default = 0
//Bit 23:16        reg_matnr_beta_brt_thrd_hi     // unsigned , default = 160
//Bit 15:12        reg_matnr_beta_brt_limt_lo     // unsigned , default = 6
//Bit 11: 8        reg_matnr_beta_brt_slop_lo     // unsigned , default = 6
//Bit  7: 0        reg_matnr_beta_brt_thrd_lo     // unsigned , default = 100
#define NR2_MATNR_XBETA_CFG                        ((0x175a  << 2) + 0xff900000)
//Bit 31:20        reserved
//Bit 19:18        reg_matnr_cbeta_use_mode       // unsigned , default = 0     0: beta_motion; 1: beta_edge; 2: min(beta_mot,beta_edge); 3: (beta_mot + beta_edge)/2
//Bit 17:16        reg_matnr_ybeta_use_mode       // unsigned , default = 0     0: beta_motion; 1: beta_edge; 2: min(beta_mot,beta_edge); 3: (beta_mot + beta_edge)/2;
//Bit 15: 8        reg_matnr_cbeta_ofst           // unsigned , default = 0
//Bit  7: 0        reg_matnr_ybeta_ofst           // unsigned , default = 0
#define NR2_MATNR_YBETA_SCL                        ((0x175b  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_ybeta_scale_min      // unsigned , default = 60
//Bit 23:16        reg_matnr_ybeta_scale_max      // unsigned , default = 255
//Bit 15: 8        reg_matnr_ybeta_scale_gain     // unsigned , default = 32    normalized 32 to 1.0
//Bit  7: 0        reg_matnr_ybeta_scale_ofst     // signed , default = 0
#define NR2_MATNR_CBETA_SCL                        ((0x175c  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_cbeta_scale_min      // unsigned , default = 0
//Bit 23:16        reg_matnr_cbeta_scale_max      // unsigned , default = 255
//Bit 15: 8        reg_matnr_cbeta_scale_gain     // unsigned , default = 32    normalized 32 to 1.0
//Bit  7: 0        reg_matnr_cbeta_scale_ofst     // signed , default = 0
#define NR2_SNR_MASK                               ((0x175d  << 2) + 0xff900000)
//Bit 31:21        reserved
//Bit 20: 0        sad_msk                        // unsigned , default = 0x0f9f3e
#define NR2_SAD2NORM_LUT0                          ((0x175e  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_sad2norm_lut3      // unsigned , default = 114
//Bit 23:16        reg_matnr_sad2norm_lut2      // unsigned , default = 146
//Bit 15: 8        reg_matnr_sad2norm_lut1      // unsigned , default = 171
//Bit  7: 0        reg_matnr_sad2norm_lut0      // unsigned , default = 205
#define NR2_SAD2NORM_LUT1                          ((0x175f  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_sad2norm_lut7      // unsigned , default = 28
//Bit 23:16        reg_matnr_sad2norm_lut6      // unsigned , default = 35
//Bit 15: 8        reg_matnr_sad2norm_lut5      // unsigned , default = 49
//Bit  7: 0        reg_matnr_sad2norm_lut4      // unsigned , default = 79
#define NR2_SAD2NORM_LUT2                          ((0x1760  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_sad2norm_lut11     // unsigned , default = 15
//Bit 23:16        reg_matnr_sad2norm_lut10     // unsigned , default = 17
//Bit 15: 8        reg_matnr_sad2norm_lut9      // unsigned , default = 19
//Bit  7: 0        reg_matnr_sad2norm_lut8      // unsigned , default = 23
#define NR2_SAD2NORM_LUT3                          ((0x1761  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_sad2norm_lut15     // unsigned , default = 8
//Bit 23:16        reg_matnr_sad2norm_lut14     // unsigned , default = 9
//Bit 15: 8        reg_matnr_sad2norm_lut13     // unsigned , default = 10
//Bit  7: 0        reg_matnr_sad2norm_lut12     // unsigned , default = 12
#define NR2_EDGE2BETA_LUT0                         ((0x1762  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_edge2beta_lut3    // unsigned , default = 128
//Bit 23:16        reg_matnr_edge2beta_lut2    // unsigned , default = 160
//Bit 15: 8        reg_matnr_edge2beta_lut1    // unsigned , default = 224
//Bit  7: 0        reg_matnr_edge2beta_lut0    // unsigned , default = 255
#define NR2_EDGE2BETA_LUT1                         ((0x1763  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_edge2beta_lut7    // unsigned , default = 4
//Bit 23:16        reg_matnr_edge2beta_lut6    // unsigned , default = 16
//Bit 15: 8        reg_matnr_edge2beta_lut5    // unsigned , default = 32
//Bit  7: 0        reg_matnr_edge2beta_lut4    // unsigned , default = 80
#define NR2_EDGE2BETA_LUT2                         ((0x1764  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_edge2beta_lut11    // unsigned , default = 0
//Bit 23:16        reg_matnr_edge2beta_lut10    // unsigned , default = 0
//Bit 15: 8        reg_matnr_edge2beta_lut9    // unsigned , default = 0
//Bit  7: 0        reg_matnr_edge2beta_lut8    // unsigned , default = 2
#define NR2_EDGE2BETA_LUT3                         ((0x1765  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_edge2beta_lut15    // unsigned , default = 0
//Bit 23:16        reg_matnr_edge2beta_lut14    // unsigned , default = 0
//Bit 15: 8        reg_matnr_edge2beta_lut13    // unsigned , default = 0
//Bit  7: 0        reg_matnr_edge2beta_lut12    // unsigned , default = 0
#define NR2_MOTION2BETA_LUT0                       ((0x1766  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_mot2beta_lut3     // unsigned , default = 32
//Bit 23:16        reg_matnr_mot2beta_lut2     // unsigned , default = 16
//Bit 15: 8        reg_matnr_mot2beta_lut1     // unsigned , default = 4
//Bit  7: 0        reg_matnr_mot2beta_lut0     // unsigned , default = 0
#define NR2_MOTION2BETA_LUT1                       ((0x1767  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_mot2beta_lut7     // unsigned , default = 196
//Bit 23:16        reg_matnr_mot2beta_lut6     // unsigned , default = 128
//Bit 15: 8        reg_matnr_mot2beta_lut5     // unsigned , default = 64
//Bit  7: 0        reg_matnr_mot2beta_lut4     // unsigned , default = 48
#define NR2_MOTION2BETA_LUT2                       ((0x1768  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_mot2beta_lut11     // unsigned , default = 255
//Bit 23:16        reg_matnr_mot2beta_lut10     // unsigned , default = 255
//Bit 15: 8        reg_matnr_mot2beta_lut9     // unsigned , default = 240
//Bit  7: 0        reg_matnr_mot2beta_lut8     // unsigned , default = 224
#define NR2_MOTION2BETA_LUT3                       ((0x1769  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_mot2beta_lut15     // unsigned , default = 255
//Bit 23:16        reg_matnr_mot2beta_lut14     // unsigned , default = 255
//Bit 15: 8        reg_matnr_mot2beta_lut13     // unsigned , default = 255
//Bit  7: 0        reg_matnr_mot2beta_lut12     // unsigned , default = 255
//========== nr2_snr_regs register end ==========//
//========== nr2_tnr_regs register begin ==========//
#define NR2_IIR_CTRL                               ((0x174e  << 2) + 0xff900000)
//Bit 31:16        reserved
//Bit 15:14        reg_lp_iir_8bit_mode      // unsigned , default = 0  10bits; 1: 9bits; 2: 8bits 3: 7bits
//Bit 13:12        reg_hp_iir_mute_mode      // unsigned , default = 0
//Bit 11: 8        reg_hp_iir_mute_thrd      // unsigned , default = 0
//Bit  7: 6        reg_hp_iir_8bit_mode      // unsigned , default = 0
//Bit  5: 4        reg_lp_iir_mute_mode      // unsigned , default = 0
//Bit  3: 0        reg_lp_iir_mute_thrd      // unsigned , default = 0
#define NR2_MATNR_MTN_CRTL                         ((0x176a  << 2) + 0xff900000)
//Bit 31:20        reserved
//Bit 19:18        reg_matnr_vmtn_use_mode   // unsigned , default = 0  0- Vmot, 1- Ymot/2 + (Umot+Vmot)/4; 2- Ymot/2 + max(Umot,Vmot)/2; 3- max(Ymot,Umot, Vmot)
//Bit 17:16        reg_matnr_umtn_use_mode   // unsigned , default = 0  0- Umot, 1- Ymot/2 + (Umot+Vmot)/4; 2- Ymot/2 + max(Umot,Vmot)/2; 3- max(Ymot,Umot, Vmot)
//Bit 15:14        reg_matnr_ymtn_use_mode   // unsigned , default = 0  0- Ymot, 1- Ymot/2 + (Umot+Vmot)/4; 2- Ymot/2 + max(Umot,Vmot)/2; 3- max(Ymot,Umot, Vmot)
//Bit 13:12        reg_matnr_mtn_txt_mode    // unsigned , default = 1
//Bit 11            reserved
//Bit 10: 8        reg_matnr_mtn_cor_mode    // unsigned , default = 1  changes)
//Bit  7: 4        reg_matnr_mtn_hpf_mode    // unsigned , default = 8  extend to u4 for nr4, 0- 1x1; 1: 1x3; 2: 1x5; 3: 3x3; 4: 3o3; 5: 3x5, 6:3x3 SAD, 7: 5x3 SAD, 8-15: drt adaptive
//Bit  3            reserved
//Bit  2: 0        reg_matnr_mtn_lpf_mode    // unsigned , default = 6  0- 1x1; 1: 1x3; 2: 1x5; 3: 3x3; 4: 3o3; 5: 3x5, 6,7: drt adaptive
#define NR2_MATNR_MTN_CRTL2                        ((0x176b  << 2) + 0xff900000)
//Bit 31:19        reserved
//Bit 18:16        reg_matnr_iir_bs_ymode      // unsigned , default = 6  LPF~~ 0- 1x1; 1: 1x3; 2: 1x5; 3: 3x3; 4: 3o3; 5: 3x5; 6/7: 0
//Bit 15: 8        reg_matnr_mtnb_alplp_cgain  // unsigned , default = 64  to 32
//Bit  7: 0        reg_matnr_mtnb_alplp_ygain  // unsigned , default = 64  to 32
#define NR2_MATNR_MTN_COR                          ((0x176c  << 2) + 0xff900000)
//Bit 31:16        reserved
//Bit 15:12        reg_matnr_mtn_cor_cofst   // unsigned , default = 3  Offset for Chroma Motion.
//Bit 11: 8        reg_matnr_mtn_cor_cgain   // unsigned , default = 3  to texture based coring for Chroma Motion. Normalized to 16 as 1
//Bit  7: 4        reg_matnr_mtn_cor_yofst   // unsigned , default = 3  Offset for Luma Motion.
//Bit  3: 0        reg_matnr_mtn_cor_ygain   // unsigned , default = 3  to texture based coring for Luma Motion. Normalized to 16 as 1
#define NR2_MATNR_MTN_GAIN                         ((0x176d  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_mtn_hp_cgain    // unsigned , default = 64  to MotHPF_yuv[k] Chrm channel for motion calculation, normalized to 64 as 1
//Bit 23:16        reg_matnr_mtn_hp_ygain    // unsigned , default = 64  to MotHPF_yuv[k] Luma channel for motion calculation, normalized to 64 as 1
//Bit 15: 8        reg_matnr_mtn_lp_cgain    // unsigned , default = 64  to MotLPF_yuv[k] Chrm channel for motion calculation, normalized to 32 as 1
//Bit  7: 0        reg_matnr_mtn_lp_ygain    // unsigned , default = 64  to MotLPF_yuv[k] Luma channel for motion calculation, normalized to 32 as 1
#define NR2_MATNR_DEGHOST                          ((0x176e  << 2) + 0xff900000)
//Bit 31            reserved
//Bit 30:28        reg_matnr_deghost_mode    // unsigned , default = 0  0:old_deghost; 1:soft_denoise & strong_deghost; 2:strong_denoise & soft_deghost; 3:strong_denoise & strong_deghost
//Bit 27:25        reserved
//Bit 24:20        reg_matnr_deghost_ygain   // unsigned , default = 4
//Bit 19:17        reserved
//Bit 16:12        reg_matnr_deghost_cgain   // unsigned , default = 4
//Bit 11: 9        reserved
//Bit  8           reg_matnr_deghost_en      // unsigned , default = 1  0: disable; 1: enable Enable signal for DeGhost function:0: disable; 1: enable
//Bit  7: 4        reg_matnr_deghost_cos     // unsigned , default = 3  DeGhost Overshoot margin for UV channel, (X2 to u10 scale)
//Bit  3: 0        reg_matnr_deghost_yos     // unsigned , default = 3  DeGhost Overshoot margin for Luma channel, (X2 to u10 scale)
#define NR2_MATNR_ALPHALP_LUT0                     ((0x176f  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_alphalp_lut3    // unsigned , default = 64  low-pass filter alpha LUT
//Bit 23:16        reg_matnr_alphalp_lut2    // unsigned , default = 128  low-pass filter alpha LUT
//Bit 15: 8        reg_matnr_alphalp_lut1    // unsigned , default = 128  low-pass filter alpha LUT
//Bit  7: 0        reg_matnr_alphalp_lut0    // unsigned , default = 128  low-pass filter alpha LUT
#define NR2_MATNR_ALPHALP_LUT1                     ((0x1770  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_alphalp_lut7    // unsigned , default = 255  low-pass filter alpha LUT
//Bit 23:16        reg_matnr_alphalp_lut6    // unsigned , default = 128  low-pass filter alpha LUT
//Bit 15: 8        reg_matnr_alphalp_lut5    // unsigned , default = 80  low-pass filter alpha LUT
//Bit  7: 0        reg_matnr_alphalp_lut4    // unsigned , default = 64  low-pass filter alpha LUT
#define NR2_MATNR_ALPHALP_LUT2                     ((0x1771  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_alphalp_lut11   // unsigned , default = 255  low-pass filter alpha LUT
//Bit 23:16        reg_matnr_alphalp_lut10   // unsigned , default = 255  low-pass filter alpha LUT
//Bit 15: 8        reg_matnr_alphalp_lut9    // unsigned , default = 255  low-pass filter alpha LUT
//Bit  7: 0        reg_matnr_alphalp_lut8    // unsigned , default = 255  low-pass filter alpha LUT
#define NR2_MATNR_ALPHALP_LUT3                     ((0x1772  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_alphalp_lut15   // unsigned , default = 255  low-pass filter alpha LUT
//Bit 23:16        reg_matnr_alphalp_lut14   // unsigned , default = 255  low-pass filter alpha LUT
//Bit 15: 8        reg_matnr_alphalp_lut13   // unsigned , default = 255  low-pass filter alpha LUT
//Bit  7: 0        reg_matnr_alphalp_lut12   // unsigned , default = 255  low-pass filter alpha LUT
#define NR2_MATNR_ALPHAHP_LUT0                     ((0x1773  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_alphahp_lut3    // unsigned , default = 64  high-pass filter alpha LUT
//Bit 23:16        reg_matnr_alphahp_lut2    // unsigned , default = 128  high-pass filter alpha LUT
//Bit 15: 8        reg_matnr_alphahp_lut1    // unsigned , default = 128  high-pass filter alpha LUT
//Bit  7: 0        reg_matnr_alphahp_lut0    // unsigned , default = 128  high-pass filter alpha LUT
#define NR2_MATNR_ALPHAHP_LUT1                     ((0x1774  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_alphahp_lut7    // unsigned , default = 255  high-pass filter alpha LUT
//Bit 23:16        reg_matnr_alphahp_lut6    // unsigned , default = 128  high-pass filter alpha LUT
//Bit 15: 8        reg_matnr_alphahp_lut5    // unsigned , default = 80  high-pass filter alpha LUT
//Bit  7: 0        reg_matnr_alphahp_lut4    // unsigned , default = 64  high-pass filter alpha LUT
#define NR2_MATNR_ALPHAHP_LUT2                     ((0x1775  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_alphahp_lut11   // unsigned , default = 255  high-pass filter alpha LUT
//Bit 23:16        reg_matnr_alphahp_lut10   // unsigned , default = 255  high-pass filter alpha LUT
//Bit 15: 8        reg_matnr_alphahp_lut9    // unsigned , default = 255  high-pass filter alpha LUT
//Bit  7: 0        reg_matnr_alphahp_lut8    // unsigned , default = 255  high-pass filter alpha LUT
#define NR2_MATNR_ALPHAHP_LUT3                     ((0x1776  << 2) + 0xff900000)
//Bit 31:24        reg_matnr_alphahp_lut15   // unsigned , default = 255  high-pass filter alpha LUT
//Bit 23:16        reg_matnr_alphahp_lut14   // unsigned , default = 255  high-pass filter alpha LUT
//Bit 15: 8        reg_matnr_alphahp_lut13   // unsigned , default = 255  high-pass filter alpha LUT
//Bit  7: 0        reg_matnr_alphahp_lut12   // unsigned , default = 255  high-pass filter alpha LUT
#define NR2_MATNR_MTNB_BRT                         ((0x1777  << 2) + 0xff900000)
//Bit 31:28        reg_matnr_mtnb_brt_limt_hi  // unsigned , default = 0
//Bit 27:24        reg_matnr_mtnb_brt_slop_hi  // unsigned , default = 0
//Bit 23:16        reg_matnr_mtnb_brt_thrd_hi  // unsigned , default = 160
//Bit 15:12        reg_matnr_mtnb_brt_limt_lo  // unsigned , default = 6
//Bit 11: 8        reg_matnr_mtnb_brt_slop_lo  // unsigned , default = 6
//Bit  7: 0        reg_matnr_mtnb_brt_thrd_lo  // unsigned , default = 100
//========== nr2_tnr_regs register end ==========//
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  nr2_regs.h
//
#define DI_EI_DRT_CTRL                             ((0x1778  << 2) + 0xff900000)
//Bit 31,     reg_rectg_en      ;u1
//Bit 30,     reg_recbld_en     ;u1
//Bit 29:28,  reg_rectg_ws      ;u2
//Bit 27,     reserved
//Bit 26:24,  reg_abq_margin    ;u3
//Bit 23,     reserved
//Bit 22:20,  reg_trend_mg      ;u3
//Bit 19:16,  reg_int_d16xc1    ;u4
//Bit 15:14,  reserved
//Bit 13: 8,  reg_int_chlmt1    ;u6
//Bit  7,     reserved
//Bit  6: 4,  reg_nscheck_thrd  ;u3
//Bit  3,     reserved
//Bit  2: 0,  reg_horsl_ws      ;u3
#define DI_EI_DRT_PIXTH                            ((0x1779  << 2) + 0xff900000)
//Bit 31:24,  reg_min_pix        ;u8
//Bit 23:16,  reg_max_pix        ;u8
//Bit 15: 8,  reg_dmaxmin_thrdma ;u8
//Bit  7: 0,  reg_dmaxmin_thrdmi ;u8
#define DI_EI_DRT_CORRPIXTH                        ((0x177a  << 2) + 0xff900000)
//Bit 31:24,  reg_newcorrpix_maxthrd ;u8
//Bit 23:16,  reg_corrpix_diffthrd   ;u8
//Bit 15: 8,  reg_corrpix_minthrd    ;u8
//Bit  7: 0,  reg_corrpix_maxthrd    ;u8
#define DI_EI_DRT_RECTG_WAVE                       ((0x177b  << 2) + 0xff900000)
//Bit 31:29,  reserved
//Bit 28:24,  reg_max_pixwave  ;u5
//Bit 23:21,  reserved
//Bit 20:16,  reg_pix_wave     ;u5
//Bit 15:14,  reserved
//Bit 13: 8,  reg_maxdrt_thrd  ;u6
//Bit  7: 0,  reg_wave_thrd    ;u8
#define DI_EI_DRT_PIX_DIFFTH                       ((0x177c  << 2) + 0xff900000)
//Bit 31:24,  reg_newraw_thrd    ;u8
//Bit 23:16,  reg_tb_max_thrd    ;u8
//Bit 15: 8,  reg_diffpix_thrd   ;u8
//Bit  7: 6,  reserved
//Bit  5: 0,  reg_bilt_trendnumt ;u8
#define DI_EI_DRT_UNBITREND_TH                     ((0x177d  << 2) + 0xff900000)
//Bit 31:29,  reserved
//Bit 28:24,  reg_trend_numb     ;u5
//Bit 23:21,  reserved
//Bit 20:16,  reg_bilt_trendnum  ;u5
//Bit 15:13,  reserved
//Bit 12: 8,  reg_unil_trendnumt ;u5
//Bit  7: 5,  reserved
//Bit  4: 0,  reg_trend_num      ;u5
#define NR2_CONV_MODE                              ((0x177f  << 2) + 0xff900000)
//Bit 3:2,	Conv_c444_mode	The format convert mode about 422 to 444 when data read out line buffer
//Bit 1:0,	Conv_c422_mode	the format convert mode about 444 to 422 when data write to line buffer
//// NR2 REG DEFINE END ////
//// DET 3D REG DEFINE BEGIN ////
//// 8'h34~8'h3f | 8'h80~8'h8f | 0x9a-0x9b
//
// Reading file:  det3d_regs.h
//
//// DET 3D REG DEFINE BEGIN ////
//// 8'h34~8'h3f
//// DET 3D REG DEFINE END ////
#define DET3D_MOTN_CFG                             ((0x1734  << 2) + 0xff900000)
//Bit 16,	reg_det3d_intr_en	        Det3d interrupt enable
//Bit 9:8,	reg_Det3D_Motion_Mode	    U2  Different mode for Motion Calculation of Luma and Chroma:
//                                      0: MotY, 1: (2*MotY + (MotU + MotV))/4; 2: Max(MotY, MotU,MotV); 3:Max(MotY, (MotU+MotV)/2)
//Bit 7:4,	reg_Det3D_Motion_Core_Rate	U4  K Rate to Edge (HV) details for coring of Motion Calculations, normalized to 32
//Bit 3:0,	reg_Det3D_Motion_Core_Thrd	U4  2X: static coring value for Motion Detection.
#define DET3D_CB_CFG                               ((0x1735  << 2) + 0xff900000)
//Bit 7:4,	reg_Det3D_ChessBd_HV_ofst	U4,  Noise immune offset for Horizotnal or vertical combing detection.
//Bit 3:0,	reg_Det3D_ChessBd_NHV_ofst	U4,  Noise immune offset for NON-Horizotnal or vertical combing detection.
#define DET3D_SPLT_CFG                             ((0x1736  << 2) + 0xff900000)
//Bit 7:4,	reg_Det3D_SplitValid_ratio	U4,  Ratio between max_value and the avg_value of the edge mapping for split line valid detection.
//                                      The smaller of this value, the easier of the split line detected.
//Bit 3:0,	reg_Det3D_AvgIdx_ratio	    U4,  Ratio to the avg_value of the edge mapping for split line position estimation.
//                                      The smaller of this value, the more samples will be added to the estimation.
#define DET3D_HV_MUTE                              ((0x1737  << 2) + 0xff900000)
//Bit 23:20, reg_Det3D_Edge_Ver_Mute	U4  X2: Horizontal pixels to be mute from H/V Edge calculation Top and Bottom border part.
//Bit 19:16, reg_Det3D_Edge_Hor_Mute	U4  X2: Horizontal pixels to be mute from H/V Edge calculation Left and right border part.
//Bit 15:12, reg_Det3D_ChessBd_Ver_Mute	U4  X2: Horizontal pixels to be mute from ChessBoard statistics calculation in middle part
//Bit 11:8,	 reg_Det3D_ChessBd_Hor_Mute	U4  X2: Horizontal pixels to be mute from ChessBoard statistics calculation in middle part
//Bit 7:4,	 reg_Det3D_STA8X8_Ver_Mute	U4  1X: Vertical pixels to be mute from 8x8 statistics calculation in each block.
//Bit 3:0,	 reg_Det3D_STA8X8_Hor_Mute	U4  1X: Horizontal pixels to be mute from 8x8 statistics calculation in each block.
#define DET3D_MAT_STA_P1M1                         ((0x1738  << 2) + 0xff900000)
//Bit 31:24, reg_Det3D_STA8X8_P1_K0_R8	U8  SAD to SAI ratio to decide P1, normalized to 256 (0.8)
//Bit 23:16, reg_Det3D_STA8X8_P1_K1_R7	U8  SAD to ENG ratio to decide P1, normalized to 128 (0.5)
//Bit 15:8,	 reg_Det3D_STA8X8_M1_K0_R6	U8  SAD to SAI ratio to decide M1, normalized to 64  (1.1)
//Bit 7:0,	 reg_Det3D_STA8X8_M1_K1_R6	U8  SAD to ENG ratio to decide M1, normalized to 64  (0.8)
#define DET3D_MAT_STA_P1TH                         ((0x1739  << 2) + 0xff900000)
//Bit 23:16, reg_Det3D_STAYUV_P1_TH_L4	U8  SAD to ENG Thrd offset to decide P1, X16         (100)
//Bit 15:8,	 reg_Det3D_STAEDG_P1_TH_L4	U8  SAD to ENG Thrd offset to decide P1, X16         (80)
//Bit 7:0,	 reg_Det3D_STAMOT_P1_TH_L4	U8  SAD to ENG Thrd offset to decide P1, X16         (48)
#define DET3D_MAT_STA_M1TH                         ((0x173a  << 2) + 0xff900000)
//Bit 23:16, reg_Det3D_STAYUV_M1_TH_L4	U8  SAD to ENG Thrd offset to decide M1, X16         (100)
//Bit 15:8,	 reg_Det3D_STAEDG_M1_TH_L4	U8  SAD to ENG Thrd offset to decide M1, X16         (80)
//Bit 7:0,	 reg_Det3D_STAMOT_M1_TH_L4	U8  SAD to ENG Thrd offset to decide M1, X16         (64)
#define DET3D_MAT_STA_RSFT                         ((0x173b  << 2) + 0xff900000)
//Bit 5:4,	 reg_Det3D_STAYUV_RSHFT	    U2  YUV statistics SAD and SAI calculation result right shift bits to accommodate the 12bits clipping:
//                                      0: mainly for images <=720x480: 1: mainly for images <=1366x768: 2: mainly for images <=1920X1080: 2; 3: other higher resolutions
//Bit 3:2,	 reg_Det3D_STAEDG_RSHFT	    U2  Horizontal and Vertical Edge Statistics SAD and SAI calculation result right shift bits to accommodate the 12bits clipping:
//                                      0: mainly for images <=720x480: 1: mainly for images <=1366x768: 2: mainly for images <=1920X1080: 2; 3: other higher resolutions
//Bit 1:0,	 reg_Det3D_STAMOT_RSHFT	    U2  Motion SAD and SAI calculation result right shift bits to accommodate the 12bits clipping:
//                                      0: mainly for images <=720x480: 1: mainly for images <=1366x768: 2: mainly for images <=1920X1080: 2; 3: other higher resolutions
#define DET3D_MAT_SYMTC_TH                         ((0x173c  << 2) + 0xff900000)
//Bit 31:24, reg_Det3D_STALUM_symtc_Th	  U8  threshold to decide if the Luma statistics is TB or LR symmetric.
//Bit 23:16, reg_Det3D_STACHR_symtc_Th	  U8  threshold to decide if the Chroma (UV) statistics is TB or LR symmetric.
//Bit 15:8,	 reg_Det3D_STAEDG_symtc_Th	  U8  threshold to decide if the Horizontal and Vertical Edge statistics is TB or LR symmetric.
//Bit 7:0,	 reg_Det3D_STAMOT_symtc_Th	  U8  threshold to decide if the Motion statistics is TB or LR symmetric.
#define DET3D_RO_DET_CB_HOR                        ((0x173d  << 2) + 0xff900000)
//Bit 31:16, RO_Det3D_ChessBd_NHor_value    U16  X64: number of Pixels of Horizontally Surely NOT matching Chessboard pattern.
//Bit 15:0,	 RO_Det3D_ChessBd_Hor_value	    U16  X64: number of Pixels of Horizontally Surely matching Chessboard pattern.
#define DET3D_RO_DET_CB_VER                        ((0x173e  << 2) + 0xff900000)
//Bit 31:16, RO_Det3D_ChessBd_NVer_value	U16  X64: number of Pixels of Vertically Surely NOT matching Chessboard pattern.
//Bit 15:0,	 RO_Det3D_ChessBd_Ver_value	    U16  X64: number of Pixels of Vertically Surely matching Chessboard pattern.
#define DET3D_RO_SPLT_HT                           ((0x173f  << 2) + 0xff900000)
//Bit 24,	 RO_Det3D_Split_HT_valid	U1  horizontal LR split border detected valid signal for top half picture
//Bit 20:16, RO_Det3D_Split_HT_pxnum	U5  number of pixels included for the LR split position estimation for top half picture
//Bit 9:0,	 RO_Det3D_Split_HT_idxX4	S10  X4: horizontal pixel shifts of LR split position to the (ColMax/2) for top half picture
//// DET 3D REG DEFINE BEGIN ////
////  8'h80~8'h8f
#define DET3D_RO_SPLT_HB                           ((0x1780  << 2) + 0xff900000)
//Bit 24,	    RO_Det3D_Split_HB_valid	    U1   horizontal LR split border detected valid signal for top half picture
//Bit 20:16,	RO_Det3D_Split_HB_pxnum	    U5   number of pixels included for the LR split position estimation for top half picture
//Bit  9: 0,	RO_Det3D_Split_HB_idxX4	    S10  X4: horizontal pixel shifts of LR split position to the (ColMax/2) for top half picture
#define DET3D_RO_SPLT_VL                           ((0x1781  << 2) + 0xff900000)
//Bit 24,	    RO_Det3D_Split_VL_valid	    U1   horizontal LR split border detected valid signal for top half picture
//Bit 20:16,	RO_Det3D_Split_VL_pxnum	    U5   number of pixels included for the LR split position estimation for top half picture
//Bit  9: 0,	RO_Det3D_Split_VL_idxX4	    S10  X4: horizontal pixel shifts of LR split position to the (ColMax/2) for top half picture
#define DET3D_RO_SPLT_VR                           ((0x1782  << 2) + 0xff900000)
//Bit 24   ,	RO_Det3D_Split_VR_valid	    U1   horizontal LR split border detected valid signal for top half picture
//Bit 20:16,	RO_Det3D_Split_VR_pxnum	    U5   number of pixels included for the LR split position estimation for top half picture
//Bit  9: 0,	RO_Det3D_Split_VR_idxX4	    S10  X4: horizontal pixel shifts of LR split position to the (ColMax/2) for top half picture
#define DET3D_RO_MAT_LUMA_LR                       ((0x1783  << 2) + 0xff900000)
//Bit 15:0,	RO_Luma_LR_score	 S2*8  LUMA statistics left right decision score for each band (8bands vertically),
//                               it can be -1/0/1:-1: most likely not LR symmetric 0: not sure 1: most likely LR symmetric
//Bit 7:0,	RO_Luma_LR_symtc	 U1*8  Luma statistics left right pure symmetric for each band (8bands vertically),
//                               it can be 0/1: 0: not sure 1: most likely LR is pure symmetric
//Bit 4:0,	RO_Luma_LR_sum	     S5  Total score of 8x8 Luma statistics for LR like decision,
//                               the larger this score, the more confidence that this is a LR 3D video. It is sum of  RO_Luma_LR_score[0~7]
#define DET3D_RO_MAT_LUMA_TB                       ((0x1784  << 2) + 0xff900000)
//Bit 15:0,	RO_Luma_TB_score	 S2*8  LUMA statistics Top/Bottom decision score for each band (8bands Horizontally),
//Bit 7:0,	RO_Luma_TB_symtc	 Luma statistics Top/Bottompure symmetric for each band (8bands Horizontally),
//Bit 4:0,	RO_Luma_TB_sum	     Total score of 8x8 Luma statistics for TB like decision,
#define DET3D_RO_MAT_CHRU_LR                       ((0x1785  << 2) + 0xff900000)
//Bit 15:0,	RO_ChrU_LR_score	S2*8  LUMA statistics left right decision score for each band (8bands vertically),
//Bit 7:0,	RO_ChrU_LR_symtc	CHRU statistics left right pure symmetric for each band (8bands vertically),
//Bit 4:0,	RO_ChrU_LR_sum	    Total score of 8x8 ChrU statistics for LR like decision,
#define DET3D_RO_MAT_CHRU_TB                       ((0x1786  << 2) + 0xff900000)
//Bit 15:0,	RO_ChrU_TB_score	S2*8  CHRU statistics Top/Bottom decision score for each band (8bands Horizontally)
//Bit 7:0,	RO_ChrU_TB_symtc	CHRU statistics Top/Bottompure symmetric for each band (8bands Horizontally)
//Bit 4:0,	RO_ChrU_TB_sum	    Total score of 8x8 ChrU statistics for TB like decision
#define DET3D_RO_MAT_CHRV_LR                       ((0x1787  << 2) + 0xff900000)
//Bit 15:0,	RO_ChrV_LR_score	S2*8  CHRUstatistics left right decision score for each band (8bands vertically)
//Bit 7:0,	RO_ChrV_LR_symtc	CHRV statistics left right pure symmetric for each band (8bands vertically)
//Bit 4:0,	RO_ChrV_LR_sum	    Total score of 8x8 ChrV statistics for LR like decision
#define DET3D_RO_MAT_CHRV_TB                       ((0x1788  << 2) + 0xff900000)
//Bit 15:0,	RO_ChrV_TB_score	CHRV statistics Top/Bottom decision score for each band (8bands Horizontally)
//Bit 7:0,	RO_ChrV_TB_symtc	CHRV statistics Top/Bottompure symmetric for each band (8bands Horizontally)
//Bit 4:0,	RO_ChrV_TB_sum	    Total score of 8x8 ChrV statistics for TB like decision
#define DET3D_RO_MAT_HEDG_LR                       ((0x1789  << 2) + 0xff900000)
//Bit 15:0,	RO_Hedg_LR_score	Horizontal Edge statistics left right decision score for each band (8bands vertically)
//Bit 7:0,	RO_Hedg_LR_symtc	Horizontal Edge statistics left right pure symmetric for each band (8bands vertically)
//Bit 4:0,	RO_Hedg_LR_sum	    Total score of 8x8 Hedg statistics for LR like decision
#define DET3D_RO_MAT_HEDG_TB                       ((0x178a  << 2) + 0xff900000)
//Bit 15:0,	RO_Hedg_TB_score	Horizontal Edge statistics Top/Bottom decision score for each band (8bands Horizontally)
//Bit 7:0,	RO_Hedg_TB_symtc	Horizontal Edge statistics Top/Bottompure symmetric for each band (8bands Horizontally)
//Bit 4:0,	RO_Hedg_TB_sum	    Total score of 8x8 Hedg statistics for TB like decision
#define DET3D_RO_MAT_VEDG_LR                       ((0x178b  << 2) + 0xff900000)
//Bit 15:0,	RO_Vedg_LR_score	Vertical Edge statistics left right decision score for each band (8bands vertically)
//Bit 7:0,	RO_Vedg_LR_symtc	Vertical Edge statistics left right pure symmetric for each band (8bands vertically)
//Bit 4:0,	RO_Vedg_LR_sum	    Total score of 8x8 Vedg statistics for LR like decision
#define DET3D_RO_MAT_VEDG_TB                       ((0x178c  << 2) + 0xff900000)
//Bit 15:0,	RO_Vedg_TB_score	Vertical Edge statistics Top/Bottom decision score for each band (8bands Horizontally)
//Bit 7:0,	RO_Vedg_TB_symtc	Vertical Edge statistics Top/Bottompure symmetric for each band (8bands Horizontally)
//Bit 4:0,	RO_Vedg_TB_sum	    Total score of 8x8 Vedg statistics for TB like decision
#define DET3D_RO_MAT_MOTN_LR                       ((0x178d  << 2) + 0xff900000)
//Bit 15:0,	RO_Motn_LR_score	Motion statistics left right decision score for each band (8bands vertically)
//Bit 7:0,	RO_Motn_LR_symtc	Motion statistics left right pure symmetric for each band (8bands vertically)
//Bit 4:0,	RO_Motn_LR_sum	    Total score of 8x8 Motion statistics for LR like decision
#define DET3D_RO_MAT_MOTN_TB                       ((0x178e  << 2) + 0xff900000)
//Bit 15:0,	RO_Motn_TB_score	Motion statistics Top/Bottom decision score for each band (8bands Horizontally)
//Bit 7:0,	RO_Motn_TB_symtc	Motion statistics Top/Bottompure symmetric for each band (8bands Horizontally)
//Bit 4:0,	RO_Motn_TB_sum	    Total score of 8x8 Motion statistics for TB like decision
#define DET3D_RO_FRM_MOTN                          ((0x178f  << 2) + 0xff900000)
//Bit 15:0,	RO_Det3D_Frame_Motion	U16  frame based motion value sum for still image decision in FW.
/// mat ram read enter addr
#define DET3D_RAMRD_ADDR_PORT                      ((0x179a  << 2) + 0xff900000)
#define DET3D_RAMRD_DATA_PORT                      ((0x179b  << 2) + 0xff900000)
//
// Closing file:  det3d_regs.h
//
//   `define DET3D_RO_SPLT_HB            8'h80
//   //Bit 24,	    RO_Det3D_Split_HB_valid	    U1   horizontal LR split border detected valid signal for top half picture
//   //Bit 20:16,	RO_Det3D_Split_HB_pxnum	    U5   number of pixels included for the LR split position estimation for top half picture
//   //Bit  9: 0,	RO_Det3D_Split_HB_idxX4	    S10  X4: horizontal pixel shifts of LR split position to the (ColMax/2) for top half picture
//   `define DET3D_RO_SPLT_VL            8'h81
//   //Bit 24,	    RO_Det3D_Split_VL_valid	    U1   horizontal LR split border detected valid signal for top half picture
//   //Bit 20:16,	RO_Det3D_Split_VL_pxnum	    U5   number of pixels included for the LR split position estimation for top half picture
//   //Bit  9: 0,	RO_Det3D_Split_VL_idxX4	    S10  X4: horizontal pixel shifts of LR split position to the (ColMax/2) for top half picture
//   `define DET3D_RO_SPLT_VR            8'h82
//   //Bit 24   ,	RO_Det3D_Split_VR_valid	    U1   horizontal LR split border detected valid signal for top half picture
//   //Bit 20:16,	RO_Det3D_Split_VR_pxnum	    U5   number of pixels included for the LR split position estimation for top half picture
//   //Bit  9: 0,	RO_Det3D_Split_VR_idxX4	    S10  X4: horizontal pixel shifts of LR split position to the (ColMax/2) for top half picture
//   `define DET3D_RO_MAT_LUMA_LR        8'h83
//   //Bit 15:0,	RO_Luma_LR_score	 S2*8  LUMA statistics left right decision score for each band (8bands vertically),
//   //                               it can be -1/0/1:-1: most likely not LR symmetric 0: not sure 1: most likely LR symmetric
//   //Bit 7:0,	RO_Luma_LR_symtc	 U1*8  Luma statistics left right pure symmetric for each band (8bands vertically),
//   //                               it can be 0/1: 0: not sure 1: most likely LR is pure symmetric
//   //Bit 4:0,	RO_Luma_LR_sum	     S5  Total score of 8x8 Luma statistics for LR like decision,
//   //                               the larger this score, the more confidence that this is a LR 3D video. It is sum of  RO_Luma_LR_score[0~7]
//   `define DET3D_RO_MAT_LUMA_TB        8'h84
//   //Bit 15:0,	RO_Luma_TB_score	 S2*8  LUMA statistics Top/Bottom decision score for each band (8bands Horizontally),
//   //Bit 7:0,	RO_Luma_TB_symtc	 Luma statistics Top/Bottompure symmetric for each band (8bands Horizontally),
//   //Bit 4:0,	RO_Luma_TB_sum	     Total score of 8x8 Luma statistics for TB like decision,
//   `define DET3D_RO_MAT_CHRU_LR        8'h85
//   //Bit 15:0,	RO_ChrU_LR_score	S2*8  LUMA statistics left right decision score for each band (8bands vertically),
//   //Bit 7:0,	RO_ChrU_LR_symtc	CHRU statistics left right pure symmetric for each band (8bands vertically),
//   //Bit 4:0,	RO_ChrU_LR_sum	    Total score of 8x8 ChrU statistics for LR like decision,
//   `define DET3D_RO_MAT_CHRU_TB        8'h86
//   //Bit 15:0,	RO_ChrU_TB_score	S2*8  CHRU statistics Top/Bottom decision score for each band (8bands Horizontally)
//   //Bit 7:0,	RO_ChrU_TB_symtc	CHRU statistics Top/Bottompure symmetric for each band (8bands Horizontally)
//   //Bit 4:0,	RO_ChrU_TB_sum	    Total score of 8x8 ChrU statistics for TB like decision
//   `define DET3D_RO_MAT_CHRV_LR        8'h87
//   //Bit 15:0,	RO_ChrV_LR_score	S2*8  CHRUstatistics left right decision score for each band (8bands vertically)
//   //Bit 7:0,	RO_ChrV_LR_symtc	CHRV statistics left right pure symmetric for each band (8bands vertically)
//   //Bit 4:0,	RO_ChrV_LR_sum	    Total score of 8x8 ChrV statistics for LR like decision
//   `define DET3D_RO_MAT_CHRV_TB        8'h88
//   //Bit 15:0,	RO_ChrV_TB_score	CHRV statistics Top/Bottom decision score for each band (8bands Horizontally)
//   //Bit 7:0,	RO_ChrV_TB_symtc	CHRV statistics Top/Bottompure symmetric for each band (8bands Horizontally)
//   //Bit 4:0,	RO_ChrV_TB_sum	    Total score of 8x8 ChrV statistics for TB like decision
//   `define DET3D_RO_MAT_HEDG_LR        8'h89
//   //Bit 15:0,	RO_Hedg_LR_score	Horizontal Edge statistics left right decision score for each band (8bands vertically)
//   //Bit 7:0,	RO_Hedg_LR_symtc	Horizontal Edge statistics left right pure symmetric for each band (8bands vertically)
//   //Bit 4:0,	RO_Hedg_LR_sum	    Total score of 8x8 Hedg statistics for LR like decision
//   `define DET3D_RO_MAT_HEDG_TB        8'h8a
//   //Bit 15:0,	RO_Hedg_TB_score	Horizontal Edge statistics Top/Bottom decision score for each band (8bands Horizontally)
//   //Bit 7:0,	RO_Hedg_TB_symtc	Horizontal Edge statistics Top/Bottompure symmetric for each band (8bands Horizontally)
//   //Bit 4:0,	RO_Hedg_TB_sum	    Total score of 8x8 Hedg statistics for TB like decision
//   `define DET3D_RO_MAT_VEDG_LR        8'h8b
//   //Bit 15:0,	RO_Vedg_LR_score	Vertical Edge statistics left right decision score for each band (8bands vertically)
//   //Bit 7:0,	RO_Vedg_LR_symtc	Vertical Edge statistics left right pure symmetric for each band (8bands vertically)
//   //Bit 4:0,	RO_Vedg_LR_sum	    Total score of 8x8 Vedg statistics for LR like decision
//   `define DET3D_RO_MAT_VEDG_TB        8'h8c
//   //Bit 15:0,	RO_Vedg_TB_score	Vertical Edge statistics Top/Bottom decision score for each band (8bands Horizontally)
//   //Bit 7:0,	RO_Vedg_TB_symtc	Vertical Edge statistics Top/Bottompure symmetric for each band (8bands Horizontally)
//   //Bit 4:0,	RO_Vedg_TB_sum	    Total score of 8x8 Vedg statistics for TB like decision
//   `define DET3D_RO_MAT_MOTN_LR        8'h8d
//   //Bit 15:0,	RO_Motn_LR_score	Motion statistics left right decision score for each band (8bands vertically)
//   //Bit 7:0,	RO_Motn_LR_symtc	Motion statistics left right pure symmetric for each band (8bands vertically)
//   //Bit 4:0,	RO_Motn_LR_sum	    Total score of 8x8 Motion statistics for LR like decision
//   `define DET3D_RO_MAT_MOTN_TB        8'h8e
//   //Bit 15:0,	RO_Motn_TB_score	Motion statistics Top/Bottom decision score for each band (8bands Horizontally)
//   //Bit 7:0,	RO_Motn_TB_symtc	Motion statistics Top/Bottompure symmetric for each band (8bands Horizontally)
//   //Bit 4:0,	RO_Motn_TB_sum	    Total score of 8x8 Motion statistics for TB like decision
//   `define DET3D_RO_FRM_MOTN           8'h8f
//   //Bit 15:0,	RO_Det3D_Frame_Motion	U16  frame based motion value sum for still image decision in FW.
#define DI_EI_CTRL10                               ((0x1793  << 2) + 0xff900000)
//bit 31:28,   reg_ei_caldrt_hstrrgchk_drtth
//bit 27:24,   reg_ei_caldrt_hstrrgchk_frcverthrd
//bit 23:20,   reg_ei_caldrt_hstrrgchk_mg
//bit 19,      reg_ei_caldrt_hstrrgchk_1sidnul
//bit 18,      reg_ei_caldrt_hstrrgchk_excpcnf
//bit 17:16,   reg_ei_caldrt_hstrrgchk_ws
//bit 15,      reg_ei_caldrt_hstrrgchk_en
//bit 14:13,   reg_ei_caldrt_hpncheck_mode
//bit 12,      reg_ei_caldrt_hpncheck_mute
//bit 11:9,    reg_ei_caldrt_hcnfcheck_mg2
//bit 8:6,     reg_ei_caldrt_hcnfcheck_mg1
//bit 5:4,     reg_ei_caldrt_hcnfcheck_mode
//bit 3:0,     reg_ei_caldrt_hcnfcheck_mg2
#define DI_NR_1_CTRL0                              ((0x1794  << 2) + 0xff900000)
#define DI_NR_1_CTRL1                              ((0x1795  << 2) + 0xff900000)
#define DI_NR_1_CTRL2                              ((0x1796  << 2) + 0xff900000)
#define DI_NR_1_CTRL3                              ((0x1797  << 2) + 0xff900000)
#define DI_EI_XWIN0                                ((0x1798  << 2) + 0xff900000)
//bit 27:16,   ei_xend0
//bit 11:0,    ei_xstart0
#define DI_EI_XWIN1                                ((0x1799  << 2) + 0xff900000)
/// mat ram read enter addr
//   `define DET3D_RAMRD_ADDR_PORT       8'h9a
//   `define DET3D_RAMRD_DATA_PORT       8'h9b
#define NR2_CFR_PARA_CFG0                          ((0x179c  << 2) + 0xff900000)
//Bit 8,	reg_CFR_CurDif_luma_mode	Current Field Top/Bot line Luma difference calculation mode
//Bit 7:6,	reg_MACFR_frm_phase	        U2  This will be a field based phase register that need to be set by FW phase to phase:
//                                      this will be calculated based on dbdr_phase of the specific line of this frame.
//                                      u1: dbdr_phase=1, center line is DB in current line;  dbdr_phase=2, center line is Dr in current line;
//Bit 5:4,	reg_CFR_CurDif_tran_mode	U2  Current Field Top/Bot line Luma/Chroma transition level calculation mode,
//Bit 3:2,	reg_CFR_alpha_mode	        U2  Alpha selection mode for CFR block from curAlp and motAlp i.e. 0: motAlp; 1: (motAlp+curAlp)/2; 2: min(motAlp,curAlp); 3: max(motAlp,curAlp);
//Bit 1:0,	reg_CFR_Motion_Luma_mode	U2  LumaMotion Calculation mode for MA-CFR. 0: top/bot Lumma motion;   1: middle Luma Motion 2: top/bot + middle motion; 3: max(top/tot motion, middle motion)
#define NR2_CFR_PARA_CFG1                          ((0x179d  << 2) + 0xff900000)
//Bit 23:16,	reg_CFR_alpha_gain	    gain to map muxed curAlp and motAlp to alpha that will be used for final blending.
//Bit 15: 8,	reg_CFR_Motion_ofst	    Offset to Motion to calculate the motAlp, e,g:motAlp= reg_CFR_Motion_ofst- Motion;This register can be seen as the level of motion that we consider it at moving.
//Bit  7: 0,	reg_CFR_CurDif_gain	    gain to CurDif to map to alpha, normalized to 32;
//// DET 3D REG DEFINE END ////
#define DI_EI_CTRL11                               ((0x179e  << 2) + 0xff900000)
//bit 30:29,   reg_ei_amb_detect_mode
//bit 28:24,   reg_ei_amb_detect_winth
//bit 23:21,   reg_ei_amb_decide_rppth
//bit 20:19,   reg_ei_retime_lastmappncnfltchk_drtth
//bit 18:16,   reg_ei_retime_lastmappncnfltchk_mode
//bit 15:14,   reg_ei_retime_lastmapvertfrcchk_mode
//bit 13:12,   reg_ei_retime_lastvertfrcchk_mode
//bit 11:8,    reg_ei_retime_lastpnchk_drtth
//bit 6,       reg_ei_retime_lastpnchk_en
//bit 5:4,     reg_ei_retime_mode
//bit 3,       reg_ei_retime_last_en
//bit 2,       reg_ei_retime_ab_en
//bit 1,       reg_ei_caldrt_hstrvertfrcchk_en
//bit 0,       reg_ei_caldrt_hstrrgchk_mode
#define DI_EI_CTRL12                               ((0x179f  << 2) + 0xff900000)
//bit 31:28,   reg_ei_drtdelay2_lmt
//bit 27:26,   reg_ei_drtdelay2_notver_lrwin
//bit 25:24,   reg_ei_drtdelay_mode
//bit 23,      reg_ei_drtdelay2_mode
//bit 22:20,   reg_ei_assign_xla_signm0th
//bit 19,      reg_ei_assign_pkbiasvert_en
//bit 18,      reg_ei_assign_xla_en
//bit 17:16,   reg_ei_assign_xla_mode
//bit 15:12,   reg_ei_assign_nlfilter_magin
//bit 11:8,    reg_ei_localsearch_maxrange
//bit 7:4,     reg_ei_xla_drtth
//bit 3:0,     reg_ei_flatmsad_thrd
#define DI_CONTWR_X                                ((0x17a0  << 2) + 0xff900000)
#define DI_CONTWR_Y                                ((0x17a1  << 2) + 0xff900000)
#define DI_CONTWR_CTRL                             ((0x17a2  << 2) + 0xff900000)
#define DI_CONTPRD_X                               ((0x17a3  << 2) + 0xff900000)
#define DI_CONTPRD_Y                               ((0x17a4  << 2) + 0xff900000)
#define DI_CONTP2RD_X                              ((0x17a5  << 2) + 0xff900000)
#define DI_CONTP2RD_Y                              ((0x17a6  << 2) + 0xff900000)
#define DI_CONTRD_CTRL                             ((0x17a7  << 2) + 0xff900000)
#define DI_EI_CTRL13                               ((0x17a8  << 2) + 0xff900000)
//bit 27:24,   reg_ei_int_drt2x_chrdrt_limit
//bit 23:20,   reg_ei_int_drt16x_core
//bit 19:16,   reg_ei_int_drtdelay2_notver_cancv
//bit 15:8,    reg_ei_int_drtdelay2_notver_sadth
//bit 7:0,     reg_ei_int_drtdelay2_vlddrt_sadth
#define DI_MTN_1_CTRL6                             ((0x17a9  << 2) + 0xff900000)
//bit 31:24,   mtn_m1b_extnd
//bit 23:16,   mtn_m1b_errod
//bit 15: 8,   mtn_core_ykinter
//bit  7: 0,   mtn_core_ckinter
#define DI_MTN_1_CTRL7                             ((0x17aa  << 2) + 0xff900000)
//bit 31:24,   mtn_core_mxcmby
//bit 23:16,   mtn_core_mxcmbc
//bit 15: 8,   mtn_core_y
//bit  7: 0,   mtn_core_c
#define DI_MTN_1_CTRL8                             ((0x17ab  << 2) + 0xff900000)
//bit 31:24,   mtn_fcore_ykinter
//bit 23:16,   mtn_fcore_ckinter
//bit 15: 8,   mtn_fcore_ykintra
//bit  7: 0,   mtn_fcore_ckintra
#define DI_MTN_1_CTRL9                             ((0x17ac  << 2) + 0xff900000)
//bit 31:24,   mtn_fcore_2yrate
//bit 23:16,   mtn_fcore_2crate
//bit 15: 8,   mtn_fcore_y
//bit  7: 0,   mtn_fcore_c
#define DI_MTN_1_CTRL10                            ((0x17ad  << 2) + 0xff900000)
//bit 27:24,   mtn_motfld0
//bit 19:16,   mtn_stlfld0
//bit 11: 8,   mtn_motfld1
//bit  3: 0,   mtn_stlfld1
#define DI_MTN_1_CTRL11                            ((0x17ae  << 2) + 0xff900000)
//bit 27:24,   mtn_smotevn
//bit 20:16,   mtn_smotodd
//bit 11: 8,   mtn_sstlevn
//bit  4: 0,   mtn_sstlodd
#define DI_MTN_1_CTRL12                            ((0x17af  << 2) + 0xff900000)
//bit 31:24,   mtn_mgain
//bit 17:16,   mtn_mmode
//bit 15: 8,   mtn_sthrd
//bit  4: 0,   mtn_sgain
#define DI_NRWR_X                                  ((0x17c0  << 2) + 0xff900000)
#define DI_NRWR_Y                                  ((0x17c1  << 2) + 0xff900000)
//bit 31:30				nrwr_words_lim
//bit 29				nrwr_rev_y
//bit 28:16				nrwr_start_y
//bit 15				nrwr_ext_en
//bit 12:0				nrwr_end_y
#define DI_NRWR_CTRL                               ((0x17c2  << 2) + 0xff900000)
//bit 31				pending_ddr_wrrsp_diwr
//bit 30				nrwr_reg_swap
//bit 29:26				nrwr_burst_lim
//bit 25				nrwr_canvas_syncen
//bit 24				nrwr_no_clk_gate
//bit 23:22				nrwr_rgb_mode  0:422 to one canvas;1:4:4:4 to one canvas;
//bit 21:20				nrwr_hconv_mode
//bit 19:18				nrwr_vconv_mode
//bit 17				nrwr_swap_cbcr
//bit 16				nrwr_urgent
//bit 15:8				nrwr_canvas_index_chroma
//bit 7:0				nrwr_canvas_index_luma
#define DI_MTNWR_X                                 ((0x17c3  << 2) + 0xff900000)
#define DI_MTNWR_Y                                 ((0x17c4  << 2) + 0xff900000)
#define DI_MTNWR_CTRL                              ((0x17c5  << 2) + 0xff900000)
#define DI_DIWR_X                                  ((0x17c6  << 2) + 0xff900000)
#define DI_DIWR_Y                                  ((0x17c7  << 2) + 0xff900000)
//bit 31:30				diwr_words_lim
//bit 29				diwr_rev_y
//bit 28:16				diwr_start_y
//bit 15				diwr_ext_en
//bit 12:0				diwr_end_y
#define DI_DIWR_CTRL                               ((0x17c8  << 2) + 0xff900000)
//bit 31				pending_ddr_wrrsp_diwr
//bit 30				diwr_reg_swap
//bit 29:26				diwr_burst_lim
//bit 25				diwr_canvas_syncen
//bit 24				diwr_no_clk_gate
//bit 23:22				diwr_rgb_mode  0:422 to one canvas;1:4:4:4 to one canvas;
//bit 21:20				diwr_hconv_mode
//bit 19:18				diwr_vconv_mode
//bit 17				diwr_swap_cbcr
//bit 16				diwr_urgent
//bit 15:8				diwr_canvas_index_chroma
//bit 7:0				diwr_canvas_index_luma
//`define DI_MTNCRD_X               8'hc9
//`define DI_MTNCRD_Y               8'hca
#define DI_MTNPRD_X                                ((0x17cb  << 2) + 0xff900000)
#define DI_MTNPRD_Y                                ((0x17cc  << 2) + 0xff900000)
#define DI_MTNRD_CTRL                              ((0x17cd  << 2) + 0xff900000)
#define DI_INP_GEN_REG                             ((0x17ce  << 2) + 0xff900000)
#define DI_INP_CANVAS0                             ((0x17cf  << 2) + 0xff900000)
#define DI_INP_LUMA_X0                             ((0x17d0  << 2) + 0xff900000)
#define DI_INP_LUMA_Y0                             ((0x17d1  << 2) + 0xff900000)
#define DI_INP_CHROMA_X0                           ((0x17d2  << 2) + 0xff900000)
#define DI_INP_CHROMA_Y0                           ((0x17d3  << 2) + 0xff900000)
#define DI_INP_RPT_LOOP                            ((0x17d4  << 2) + 0xff900000)
#define DI_INP_LUMA0_RPT_PAT                       ((0x17d5  << 2) + 0xff900000)
#define DI_INP_CHROMA0_RPT_PAT                     ((0x17d6  << 2) + 0xff900000)
#define DI_INP_DUMMY_PIXEL                         ((0x17d7  << 2) + 0xff900000)
#define DI_INP_LUMA_FIFO_SIZE                      ((0x17d8  << 2) + 0xff900000)
#define DI_INP_RANGE_MAP_Y                         ((0x17ba  << 2) + 0xff900000)
#define DI_INP_RANGE_MAP_CB                        ((0x17bb  << 2) + 0xff900000)
#define DI_INP_RANGE_MAP_CR                        ((0x17bc  << 2) + 0xff900000)
#define DI_INP_GEN_REG2                            ((0x1791  << 2) + 0xff900000)
#define DI_INP_FMT_CTRL                            ((0x17d9  << 2) + 0xff900000)
#define DI_INP_FMT_W                               ((0x17da  << 2) + 0xff900000)
#define DI_MEM_GEN_REG                             ((0x17db  << 2) + 0xff900000)
#define DI_MEM_CANVAS0                             ((0x17dc  << 2) + 0xff900000)
#define DI_MEM_LUMA_X0                             ((0x17dd  << 2) + 0xff900000)
#define DI_MEM_LUMA_Y0                             ((0x17de  << 2) + 0xff900000)
#define DI_MEM_CHROMA_X0                           ((0x17df  << 2) + 0xff900000)
#define DI_MEM_CHROMA_Y0                           ((0x17e0  << 2) + 0xff900000)
#define DI_MEM_RPT_LOOP                            ((0x17e1  << 2) + 0xff900000)
#define DI_MEM_LUMA0_RPT_PAT                       ((0x17e2  << 2) + 0xff900000)
#define DI_MEM_CHROMA0_RPT_PAT                     ((0x17e3  << 2) + 0xff900000)
#define DI_MEM_DUMMY_PIXEL                         ((0x17e4  << 2) + 0xff900000)
#define DI_MEM_LUMA_FIFO_SIZE                      ((0x17e5  << 2) + 0xff900000)
#define DI_MEM_RANGE_MAP_Y                         ((0x17bd  << 2) + 0xff900000)
#define DI_MEM_RANGE_MAP_CB                        ((0x17be  << 2) + 0xff900000)
#define DI_MEM_RANGE_MAP_CR                        ((0x17bf  << 2) + 0xff900000)
#define DI_MEM_GEN_REG2                            ((0x1792  << 2) + 0xff900000)
#define DI_MEM_FMT_CTRL                            ((0x17e6  << 2) + 0xff900000)
#define DI_MEM_FMT_W                               ((0x17e7  << 2) + 0xff900000)
#define DI_IF1_GEN_REG                             ((0x17e8  << 2) + 0xff900000)
#define DI_IF1_CANVAS0                             ((0x17e9  << 2) + 0xff900000)
#define DI_IF1_LUMA_X0                             ((0x17ea  << 2) + 0xff900000)
#define DI_IF1_LUMA_Y0                             ((0x17eb  << 2) + 0xff900000)
#define DI_IF1_CHROMA_X0                           ((0x17ec  << 2) + 0xff900000)
#define DI_IF1_CHROMA_Y0                           ((0x17ed  << 2) + 0xff900000)
#define DI_IF1_RPT_LOOP                            ((0x17ee  << 2) + 0xff900000)
#define DI_IF1_LUMA0_RPT_PAT                       ((0x17ef  << 2) + 0xff900000)
#define DI_IF1_CHROMA0_RPT_PAT                     ((0x17f0  << 2) + 0xff900000)
#define DI_IF1_DUMMY_PIXEL                         ((0x17f1  << 2) + 0xff900000)
#define DI_IF1_LUMA_FIFO_SIZE                      ((0x17f2  << 2) + 0xff900000)
#define DI_IF1_RANGE_MAP_Y                         ((0x17fc  << 2) + 0xff900000)
#define DI_IF1_RANGE_MAP_CB                        ((0x17fd  << 2) + 0xff900000)
#define DI_IF1_RANGE_MAP_CR                        ((0x17fe  << 2) + 0xff900000)
#define DI_IF1_GEN_REG2                            ((0x1790  << 2) + 0xff900000)
#define DI_IF1_FMT_CTRL                            ((0x17f3  << 2) + 0xff900000)
#define DI_IF1_FMT_W                               ((0x17f4  << 2) + 0xff900000)
#define DI_CHAN2_GEN_REG                           ((0x17f5  << 2) + 0xff900000)
#define DI_CHAN2_CANVAS0                           ((0x17f6  << 2) + 0xff900000)
#define DI_CHAN2_LUMA_X0                           ((0x17f7  << 2) + 0xff900000)
#define DI_CHAN2_LUMA_Y0                           ((0x17f8  << 2) + 0xff900000)
#define DI_CHAN2_CHROMA_X0                         ((0x17f9  << 2) + 0xff900000)
#define DI_CHAN2_CHROMA_Y0                         ((0x17fa  << 2) + 0xff900000)
#define DI_CHAN2_RPT_LOOP                          ((0x17fb  << 2) + 0xff900000)
#define DI_CHAN2_LUMA0_RPT_PAT                     ((0x17b0  << 2) + 0xff900000)
#define DI_CHAN2_CHROMA0_RPT_PAT                   ((0x17b1  << 2) + 0xff900000)
#define DI_CHAN2_DUMMY_PIXEL                       ((0x17b2  << 2) + 0xff900000)
#define DI_CHAN2_LUMA_FIFO_SIZE                    ((0x17b3  << 2) + 0xff900000)
#define DI_CHAN2_RANGE_MAP_Y                       ((0x17b4  << 2) + 0xff900000)
#define DI_CHAN2_RANGE_MAP_CB                      ((0x17b5  << 2) + 0xff900000)
#define DI_CHAN2_RANGE_MAP_CR                      ((0x17b6  << 2) + 0xff900000)
#define DI_CHAN2_GEN_REG2                          ((0x17b7  << 2) + 0xff900000)
#define DI_CHAN2_FMT_CTRL                          ((0x17b8  << 2) + 0xff900000)
#define DI_CHAN2_FMT_W                             ((0x17b9  << 2) + 0xff900000)
//
// Closing file:  mad_regs.h
//
//`define VPP2_VCBUS_BASE              8'h19
//
// Reading file:  vpp2_regs.h
//
// synopsys translate_off
// synopsys translate_on
// -----------------------------------------------
// CBUS_BASE:  VPP2_VCBUS_BASE = 0x19
// -----------------------------------------------
//===========================================================================
// Video postprocesing Registers
//===========================================================================
// dummy data used in the VPP preblend and scaler
// Bit 23:16
// Bit 15:8     CB
// Bit 7:0      CR
#define VPP2_DUMMY_DATA                            ((0x1900  << 2) + 0xff900000)
//input line length used in VPP
#define VPP2_LINE_IN_LENGTH                        ((0x1901  << 2) + 0xff900000)
//input Picture height used in VPP
#define VPP2_PIC_IN_HEIGHT                         ((0x1902  << 2) + 0xff900000)
//Because there are many coefficients used in the vertical filter and horizontal filters,
//indirect access the coefficients of vertical filter and horizontal filter is used.
//For vertical filter, there are 33x4 coefficients
//For horizontal filter, there are 33x4 coefficients
//Bit 15    index increment, if bit9 == 1  then (0: index increase 1, 1: index increase 2) else (index increase 2)
//Bit 14    1: read coef through cbus enable, just for debug purpose in case when we wanna check the coef in ram in correct or not
//Bit 13    if true, vertical separated coef enable
//Bit 9     if true, use 9bit resolution coef, other use 8bit resolution coef
//Bit 8:7   type of index, 00: vertical coef, 01: vertical chroma coef: 10: horizontal coef, 11: resevered
//Bit 6:0   coef index
#define VPP2_SCALE_COEF_IDX                        ((0x1903  << 2) + 0xff900000)
//coefficients for vertical filter and horizontal filter
#define VPP2_SCALE_COEF                            ((0x1904  << 2) + 0xff900000)
//these following registers are the absolute line address pointer for output divided screen
//The output divided screen is shown in the following:
//
//  --------------------------   <------ line zero
//      .
//      .
//      .           region0        <---------- nonlinear region or nonscaling region
//      .
//  ---------------------------
//  ---------------------------  <------ region1_startp
//      .
//      .           region1         <---------- nonlinear region
//      .
//      .
//  ---------------------------
//  ---------------------------  <------ region2_startp
//      .
//      .           region2         <---------- linear region
//      .
//      .
//  ---------------------------
//  ---------------------------  <------ region3_startp
//      .
//      .           region3         <---------- nonlinear region
//      .
//      .
//  ---------------------------
//  ---------------------------  <------ region4_startp
//      .
//      .           region4         <---------- nonlinear region or nonoscaling region
//      .
//      .
//  ---------------------------  <------ region4_endp
//Bit 28:16 region1 startp
//Bit 12:0 region2 startp
#define VPP2_VSC_REGION12_STARTP                   ((0x1905  << 2) + 0xff900000)
//Bit 28:16 region3 startp
//Bit 12:0 region4 startp
#define VPP2_VSC_REGION34_STARTP                   ((0x1906  << 2) + 0xff900000)
#define VPP2_VSC_REGION4_ENDP                      ((0x1907  << 2) + 0xff900000)
//vertical start phase step, (source/dest)*(2^24)
//Bit 27:24 integer part
//Bit 23:0  fraction part
#define VPP2_VSC_START_PHASE_STEP                  ((0x1908  << 2) + 0xff900000)
//vertical scaler region0 phase slope, Bit24 signed bit
#define VPP2_VSC_REGION0_PHASE_SLOPE               ((0x1909  << 2) + 0xff900000)
//vertical scaler region1 phase slope, Bit24 signed bit
#define VPP2_VSC_REGION1_PHASE_SLOPE               ((0x190a  << 2) + 0xff900000)
//vertical scaler region3 phase slope, Bit24 signed bit
#define VPP2_VSC_REGION3_PHASE_SLOPE               ((0x190b  << 2) + 0xff900000)
//vertical scaler region4 phase slope, Bit24 signed bit
#define VPP2_VSC_REGION4_PHASE_SLOPE               ((0x190c  << 2) + 0xff900000)
//Bit 18:17     double line mode, input/output line width of vscaler becomes 2X,
//           so only 2 line buffer in this case, use for 3D line by line interleave scaling
//           bit1 true, double the input width and half input height, bit0 true, change line buffer 2 lines instead of 4 lines
//Bit 16     0: progressive output, 1: interlace output
//Bit 15     vertical scaler output line0 in advance or not for bottom field
//Bit 14:13  vertical scaler initial repeat line0 number for bottom field
//Bit 11:8   vertical scaler initial receiving  number for bottom field
//Bit 7      vertical scaler output line0 in advance or not for top field
//Bit 6:5    vertical scaler initial repeat line0 number for top field
//Bit 3:0    vertical scaler initial receiving  number for top field
#define VPP2_VSC_PHASE_CTRL                        ((0x190d  << 2) + 0xff900000)
//Bit 31:16  vertical scaler field initial phase for bottom field
//Bit 15:0  vertical scaler field initial phase for top field
#define VPP2_VSC_INI_PHASE                         ((0x190e  << 2) + 0xff900000)
//Bit 28:16 region1 startp
//Bit 12:0 region2 startp
#define VPP2_HSC_REGION12_STARTP                   ((0x1910  << 2) + 0xff900000)
//Bit 28:16 region3 startp
//Bit 12:0 region4 startp
#define VPP2_HSC_REGION34_STARTP                   ((0x1911  << 2) + 0xff900000)
#define VPP2_HSC_REGION4_ENDP                      ((0x1912  << 2) + 0xff900000)
//horizontal start phase step, (source/dest)*(2^24)
//Bit 27:24 integer part
//Bit 23:0  fraction part
#define VPP2_HSC_START_PHASE_STEP                  ((0x1913  << 2) + 0xff900000)
//horizontal scaler region0 phase slope, Bit24 signed bit
#define VPP2_HSC_REGION0_PHASE_SLOPE               ((0x1914  << 2) + 0xff900000)
//horizontal scaler region1 phase slope, Bit24 signed bit
#define VPP2_HSC_REGION1_PHASE_SLOPE               ((0x1915  << 2) + 0xff900000)
//horizontal scaler region3 phase slope, Bit24 signed bit
#define VPP2_HSC_REGION3_PHASE_SLOPE               ((0x1916  << 2) + 0xff900000)
//horizontal scaler region4 phase slope, Bit24 signed bit
#define VPP2_HSC_REGION4_PHASE_SLOPE               ((0x1917  << 2) + 0xff900000)
//Bit 22:21   horizontal scaler initial repeat pixel0 number
//Bit 19:16   horizontal scaler initial receiving number
//Bit 15:0    horizontal scaler top field initial phase
#define VPP2_HSC_PHASE_CTRL                        ((0x1918  << 2) + 0xff900000)
// Bit 22 if true, divide VSC line length 2 as the HSC input length, othwise VSC length length is the same as the VSC line length,
//                 just for special usage, more flexibility
// Bit 21 if true, prevsc uses lin buffer, otherwise prevsc does not use line buffer, it should be same as prevsc_en
// Bit 20 prehsc_en
// Bit 19 prevsc_en
// Bit 18 vsc_en
// Bit 17 hsc_en
// Bit 16 scale_top_en
// Bit 15 video1 scale out enable
// Bit 12 if true, region0,region4 are nonlinear regions, otherwise they are not scaling regions, for horizontal scaler
// Bit 10:8 horizontal scaler bank length
// Bit 5, vertical scaler phase field mode, if true, disable the opposite parity line output, more bandwith needed if output 1080i
// Bit 4 if true, region0,region4 are nonlinear regions, otherwise they are not scaling regions, for vertical scaler
// Bit 2:0 vertical scaler bank length
#define VPP2_SC_MISC                               ((0x1919  << 2) + 0xff900000)
// preblend video1 horizontal start and end
//Bit 28:16 start
//Bit 12:0 end
#define VPP2_PREBLEND_VD1_H_START_END              ((0x191a  << 2) + 0xff900000)
// preblend video1 vertical start and end
//Bit 28:16 start
//Bit 12:0 end
#define VPP2_PREBLEND_VD1_V_START_END              ((0x191b  << 2) + 0xff900000)
// postblend video1 horizontal start and end
//Bit 28:16 start
//Bit 12:0 end
#define VPP2_POSTBLEND_VD1_H_START_END             ((0x191c  << 2) + 0xff900000)
// postblend video1 vertical start and end
//Bit 28:16 start
//Bit 12:0 end
#define VPP2_POSTBLEND_VD1_V_START_END             ((0x191d  << 2) + 0xff900000)
// preblend horizontal size
#define VPP2_PREBLEND_H_SIZE                       ((0x1920  << 2) + 0xff900000)
// postblend horizontal size
#define VPP2_POSTBLEND_H_SIZE                      ((0x1921  << 2) + 0xff900000)
//VPP hold lines
//Bit 29:24
//Bit 21:16
//Bit 15:8     preblend hold lines
//Bit 7:0      postblend hold lines
#define VPP2_HOLD_LINES                            ((0x1922  << 2) + 0xff900000)
//Bit 25   if true, change screen to one color value for preblender
//Bit 24   if true, change screen to one color value for postblender
// Bit 23:16 one color Y
// Bit 15:8 one color Cb
// Bit  7:0 one color  Cr
#define VPP2_BLEND_ONECOLOR_CTRL                   ((0x1923  << 2) + 0xff900000)
//Read Only, VPP preblend current_x, current_y
//Bit 28:16 current_x
//Bit 12:0 current_y
#define VPP2_PREBLEND_CURRENT_XY                   ((0x1924  << 2) + 0xff900000)
//Read Only, VPP postblend current_x, current_y
//Bit 28:16 current_x
//Bit 12:0 current_y
#define VPP2_POSTBLEND_CURRENT_XY                  ((0x1925  << 2) + 0xff900000)
// Bit 31  vd1_bgosd_exchange_en for preblend
// Bit 30  vd1_bgosd_exchange_en for postblend
// bit 28   color management enable
// Bit 27,  reserved
// Bit 26:18, reserved
// Bit 17, osd2 enable for preblend
// Bit 16, osd1 enable for preblend
// Bit 15, reserved
// Bit 14, vd1 enable for preblend
// Bit 13, osd2 enable for postblend
// Bit 12, osd1 enable for postblend
// Bit 11, reserved
// Bit 10, vd1 enable for postblend
// Bit 9,  if true, osd1 is alpha premultipiled
// Bit 8,  if true, osd2 is alpha premultipiled
// Bit 7,  postblend module enable
// Bit 6,  preblend module enable
// Bit 5,  if true, osd2 foreground compared with osd1 in preblend
// Bit 4,  if true, osd2 foreground compared with osd1 in postblend
// Bit 3,
// Bit 2,  if true, disable resetting async fifo every vsync, otherwise every vsync
//           the aync fifo will be reseted.
// Bit 1,
// Bit 0    if true, the output result of VPP is saturated
#define VPP2_MISC                                  ((0x1926  << 2) + 0xff900000)
//Bit 31:20 ofifo line length minus 1
//Bit 19  if true invert input vs
//Bit 18  if true invert input hs
//Bit 17  force top/bottom field, enable
//Bit 16  force top/bottom field, 0: top, 1: bottom
//Bit 15  force one go_field, one pluse, write only
//Bit 14  force one go_line, one pluse, write only
//Bit 12:0 ofifo size (actually only bit 10:1 is valid), always even number
#define VPP2_OFIFO_SIZE                            ((0x1927  << 2) + 0xff900000)
//Read only
//Bit 28:17 current scale out fifo counter
//Bit 16:12 current afifo counter
//Bit 11:0 current ofifo counter
#define VPP2_FIFO_STATUS                           ((0x1928  << 2) + 0xff900000)
// Bit 3 SMOKE2 postblend enable only when postblend osd2 is not enable
// Bit 2 SMOKE2 preblend enable only when preblend osd2 is not enable
// Bit 1 SMOKE1 postblend enable only when postblend osd1 is not enable
// Bit 0 SMOKE1 preblend enable only when preblend osd1 is not enable
#define VPP2_SMOKE_CTRL                            ((0x1929  << 2) + 0xff900000)
//smoke can be used only when that blending is disable and then be used as smoke function
//smoke1 for OSD1 chanel
//smoke2 for OSD2 chanel
//31:24 Y
//23:16 Cb
//15:8 Cr
//7:0 Alpha
#define VPP2_SMOKE1_VAL                            ((0x192a  << 2) + 0xff900000)
#define VPP2_SMOKE2_VAL                            ((0x192b  << 2) + 0xff900000)
//Bit 28:16 start
//Bit 12:0 end
#define VPP2_SMOKE1_H_START_END                    ((0x192d  << 2) + 0xff900000)
//Bit 28:16 start
//Bit 12:0 end
#define VPP2_SMOKE1_V_START_END                    ((0x192e  << 2) + 0xff900000)
//Bit 28:16 start
//Bit 12:0 end
#define VPP2_SMOKE2_H_START_END                    ((0x192f  << 2) + 0xff900000)
//Bit 28:16 start
//Bit 12:0 end
#define VPP2_SMOKE2_V_START_END                    ((0x1930  << 2) + 0xff900000)
//Bit 27:16 scale out fifo line length minus 1
//Bit 12:0 scale out fifo size (actually only bit 11:1 is valid, 11:1, max 1024), always even number
#define VPP2_SCO_FIFO_CTRL                         ((0x1933  << 2) + 0xff900000)
//for 3D quincunx sub-sampling and horizontal pixel by pixel 3D interleaving
//Bit 27:24, prehsc_mode, bit 3:2, prehsc odd line interp mode, bit 1:0, prehsc even line interp mode,
//           each 2bit, 00: pix0+pix1/2, average, 01: pix1, 10: pix0
//Bit 23 horizontal scaler double pixel mode
//Bit 22:21   horizontal scaler initial repeat pixel0 number1
//Bit 19:16   horizontal scaler initial receiving number1
//Bit 15:0    horizontal scaler top field initial phase1
#define VPP2_HSC_PHASE_CTRL1                       ((0x1934  << 2) + 0xff900000)
//for 3D quincunx sub-sampling
//31:24  prehsc pattern, each patten 1 bit, from lsb -> msb
//22:20  prehsc pattern start
//18:16 prehsc pattern end
//15:8 pattern, each patten 1 bit, from lsb -> msb
//6:4  pattern start
//2:0  pattern end
#define VPP2_HSC_INI_PAT_CTRL                      ((0x1935  << 2) + 0xff900000)
//Bit 3         minus black level enable for vadj2
//Bit 2         Video adjustment enable for vadj2
//Bit 1         minus black level enable for vadj1
//Bit 0         Video adjustment enable for vadj1
#define VPP2_VADJ_CTRL                             ((0x1940  << 2) + 0xff900000)
//Bit 16:8  brightness, signed value
//Bit 7:0   contrast, unsigned value, contrast from  0 <= contrast <2
#define VPP2_VADJ1_Y                               ((0x1941  << 2) + 0xff900000)
//cb' = cb*ma + cr*mb
//cr' = cb*mc + cr*md
//all are bit 9:0, signed value, -2 < ma/mb/mc/md < 2
#define VPP2_VADJ1_MA_MB                           ((0x1942  << 2) + 0xff900000)
#define VPP2_VADJ1_MC_MD                           ((0x1943  << 2) + 0xff900000)
//Bit 16:8  brightness, signed value
//Bit 7:0   contrast, unsigned value, contrast from  0 <= contrast <2
#define VPP2_VADJ2_Y                               ((0x1944  << 2) + 0xff900000)
//cb' = cb*ma + cr*mb
//cr' = cb*mc + cr*md
//all are bit 9:0, signed value, -2 < ma/mb/mc/md < 2
#define VPP2_VADJ2_MA_MB                           ((0x1945  << 2) + 0xff900000)
#define VPP2_VADJ2_MC_MD                           ((0x1946  << 2) + 0xff900000)
//Read only
//Bit 31, if it is true, it means this probe is valid in the last field/frame
//Bit 29:20 component 0
//Bit 19:10 component 1
//Bit 9:0 component 2
#define VPP2_MATRIX_PROBE_COLOR                    ((0x195c  << 2) + 0xff900000)
//Bit 23:16 component 0
//Bit 15:8  component 1
//Bit 7:0 component 2
#define VPP2_MATRIX_HL_COLOR                       ((0x195d  << 2) + 0xff900000)
//28:16 probe x, postion
//12:0  probe y, position
#define VPP2_MATRIX_PROBE_POS                      ((0x195e  << 2) + 0xff900000)
//Bit 16,  highlight_en
//Bit 15   probe_post, if true, probe pixel data after matrix, otherwise probe pixel data before matrix
//Bit 14:12 probe_sel, 000: select post matrix, 001: select vd1 matrix,
//Bit 9:8  matrix coef idx selection, 00: select post matrix, 01: select vd1 matrix
//Bit 5    vd1 conversion matrix enable
//Bit 4    reserved
//Bit 2    output y/cb/cr saturation enable, only for post matrix (y saturate to 16-235, cb/cr saturate to 16-240)
//Bit 1    input y/cb/cr saturation enable, only for post matrix (y saturate to 16-235, cb/cr saturate to 16-240)
//Bit 0    post conversion matrix enable
#define VPP2_MATRIX_CTRL                           ((0x195f  << 2) + 0xff900000)
//Bit 28:16 coef00
//Bit 12:0  coef01
#define VPP2_MATRIX_COEF00_01                      ((0x1960  << 2) + 0xff900000)
//Bit 28:16 coef02
//Bit 12:0  coef10
#define VPP2_MATRIX_COEF02_10                      ((0x1961  << 2) + 0xff900000)
//Bit 28:16 coef11
//Bit 12:0  coef12
#define VPP2_MATRIX_COEF11_12                      ((0x1962  << 2) + 0xff900000)
//Bit 28:16 coef20
//Bit 12:0  coef21
#define VPP2_MATRIX_COEF20_21                      ((0x1963  << 2) + 0xff900000)
#define VPP2_MATRIX_COEF22                         ((0x1964  << 2) + 0xff900000)
//Bit 26:16 offset0
//Bit 10:0  offset1
#define VPP2_MATRIX_OFFSET0_1                      ((0x1965  << 2) + 0xff900000)
//Bit 10:0  offset2
#define VPP2_MATRIX_OFFSET2                        ((0x1966  << 2) + 0xff900000)
//Bit 26:16 pre_offset0
//Bit 10:0  pre_offset1
#define VPP2_MATRIX_PRE_OFFSET0_1                  ((0x1967  << 2) + 0xff900000)
//Bit 10:0  pre_offset2
#define VPP2_MATRIX_PRE_OFFSET2                    ((0x1968  << 2) + 0xff900000)
// dummy data used in the VPP postblend
// Bit 23:16    Y
// Bit 15:8     CB
// Bit 7:0      CR
#define VPP2_DUMMY_DATA1                           ((0x1969  << 2) + 0xff900000)
//Bit 31 gainoff module enable
//Bit 26:16 gain0, 1.10 unsigned data
//Bit 10:0  gain1, 1.10 unsigned dat
#define VPP2_GAINOFF_CTRL0                         ((0x196a  << 2) + 0xff900000)
//Bit 26:16 gain2, 1.10 unsigned data
//Bit 10:0, offset0, signed data
#define VPP2_GAINOFF_CTRL1                         ((0x196b  << 2) + 0xff900000)
//Bit 26:16, offset1, signed data
//Bit 10:0, offset2, signed data
#define VPP2_GAINOFF_CTRL2                         ((0x196c  << 2) + 0xff900000)
//Bit 26:16, pre_offset0, signed data
//Bit 10:0, pre_offset1, signed data
#define VPP2_GAINOFF_CTRL3                         ((0x196d  << 2) + 0xff900000)
//Bit 10:0, pre_offset2, signed data
#define VPP2_GAINOFF_CTRL4                         ((0x196e  << 2) + 0xff900000)
//only two registers used in the color management, which are defined in the chroma_reg.h
#define VPP2_CHROMA_ADDR_PORT                      ((0x1970  << 2) + 0xff900000)
#define VPP2_CHROMA_DATA_PORT                      ((0x1971  << 2) + 0xff900000)
//`include "chroma_reg.h"       //defined inside is the indirect addressed registers
//(hsvsharp), (blue), gainoff, mat_vd1,mat_vd2, mat_post, prebld, postbld,(hsharp),sco_ff, vadj1, vadj2, ofifo, (chroma1), clk0(free_clk) vpp_reg
//each item 2bits, for each 2bits, if bit 2*i+1 == 1, free clk, else if bit 2*i == 1 no clk, else auto gated clock
//bit1 is not used, because I can not turn off vpp_reg clk because I can not turn on again
//because the register itself canot be set again without clk
//Bit 31:0
#define VPP2_GCLK_CTRL0                            ((0x1972  << 2) + 0xff900000)
//Chroma2_filter, Chroma2, (Ccoring), (blackext), dnlp
//Bit 9:0
#define VPP2_GCLK_CTRL1                            ((0x1973  << 2) + 0xff900000)
//prehsc_clk, line_buf, prevsc, vsc, hsc_clk, clk0(free_clk)
//Bit 11:0
#define VPP2_SC_GCLK_CTRL                          ((0x1974  << 2) + 0xff900000)
//Bit 17:9 VD1 alpha for preblend
//Bit 8:0 VD1 alpha for postblend
#define VPP2_MISC1                                 ((0x1976  << 2) + 0xff900000)
//Bit 31:24     bottom of region03 output value
//Bit 23:16     bottom of region02 output value
//Bit 15:8      bottom of region01 output value
//Bit 7:0       bottom of region00 output value
#define VPP2_DNLP_CTRL_00                          ((0x1981  << 2) + 0xff900000)
//Bit 31:24     bottom of region07 output value
//Bit 23:16     bottom of region06 output value
//Bit 15:8      bottom of region05 output value
//Bit 7:0       bottom of region04 output value
#define VPP2_DNLP_CTRL_01                          ((0x1982  << 2) + 0xff900000)
//Bit 31:24     bottom of region11 output value
//Bit 23:16     bottom of region10 output value
//Bit 15:8      bottom of region09 output value
//Bit 7:0       bottom of region08 output value
#define VPP2_DNLP_CTRL_02                          ((0x1983  << 2) + 0xff900000)
//Bit 31:24     bottom of region15 output value
//Bit 23:16     bottom of region14 output value
//Bit 15:8      bottom of region13 output value
//Bit 7:0       bottom of region12 output value
#define VPP2_DNLP_CTRL_03                          ((0x1984  << 2) + 0xff900000)
//Bit 31:24     bottom of region19 output value
//Bit 23:16     bottom of region18 output value
//Bit 15:8      bottom of region17 output value
//Bit 7:0       bottom of region16 output value
#define VPP2_DNLP_CTRL_04                          ((0x1985  << 2) + 0xff900000)
//Bit 31:24     bottom of region23 output value
//Bit 23:16     bottom of region22 output value
//Bit 15:8      bottom of region21 output value
//Bit 7:0       bottom of region20 output value
#define VPP2_DNLP_CTRL_05                          ((0x1986  << 2) + 0xff900000)
//Bit 31:24     bottom of region27 output value
//Bit 23:16     bottom of region26 output value
//Bit 15:8      bottom of region25 output value
//Bit 7:0       bottom of region24 output value
#define VPP2_DNLP_CTRL_06                          ((0x1987  << 2) + 0xff900000)
//Bit 31:24     bottom of region31 output value
//Bit 23:16     bottom of region30 output value
//Bit 15:8      bottom of region29 output value
//Bit 7:0       bottom of region28 output value
#define VPP2_DNLP_CTRL_07                          ((0x1988  << 2) + 0xff900000)
//Bit 31:24     bottom of region35 output value
//Bit 23:16     bottom of region34 output value
//Bit 15:8      bottom of region33 output value
//Bit 7:0       bottom of region32 output value
#define VPP2_DNLP_CTRL_08                          ((0x1989  << 2) + 0xff900000)
//Bit 31:24     bottom of region39 output value
//Bit 23:16     bottom of region38 output value
//Bit 15:8      bottom of region37 output value
//Bit 7:0       bottom of region36 output value
#define VPP2_DNLP_CTRL_09                          ((0x198a  << 2) + 0xff900000)
//Bit 31:24     bottom of region43 output value
//Bit 23:16     bottom of region42 output value
//Bit 15:8      bottom of region41 output value
//Bit 7:0       bottom of region40 output value
#define VPP2_DNLP_CTRL_10                          ((0x198b  << 2) + 0xff900000)
//Bit 31:24     bottom of region47 output value
//Bit 23:16     bottom of region46 output value
//Bit 15:8      bottom of region45 output value
//Bit 7:0       bottom of region44 output value
#define VPP2_DNLP_CTRL_11                          ((0x198c  << 2) + 0xff900000)
//Bit 31:24     bottom of region51 output value
//Bit 23:16     bottom of region50 output value
//Bit 15:8      bottom of region49 output value
//Bit 7:0       bottom of region48 output value
#define VPP2_DNLP_CTRL_12                          ((0x198d  << 2) + 0xff900000)
//Bit 31:24     bottom of region55 output value
//Bit 23:16     bottom of region54 output value
//Bit 15:8      bottom of region53 output value
//Bit 7:0       bottom of region52 output value
#define VPP2_DNLP_CTRL_13                          ((0x198e  << 2) + 0xff900000)
//Bit 31:24     bottom of region59 output value
//Bit 23:16     bottom of region58 output value
//Bit 15:8      bottom of region57 output value
//Bit 7:0       bottom of region56 output value
#define VPP2_DNLP_CTRL_14                          ((0x198f  << 2) + 0xff900000)
//Bit 31:24     bottom of region63 output value
//Bit 23:16     bottom of region62 output value
//Bit 15:8      bottom of region61 output value
//Bit 7:0       bottom of region60 output value
#define VPP2_DNLP_CTRL_15                          ((0x1990  << 2) + 0xff900000)
//Bit 20 reserved
//Bit 19 reserved
//Bit 18 demo dynamic nonlinear luma processing enable
//Bit 17 reserved
//Bit 16 reserved
//Bit 15:14, 2'b00: demo adjust on top, 2'b01: demo adjust on bottom, 2'b10: demo adjust on left, 2'b11: demo adjust on right
//Bit 4 reserved
//Bit 3 reserved
//Bit 2 dynamic nonlinear luma processing enable
//Bit 1 reserved
//Bit 0 reserved
#define VPP2_VE_ENABLE_CTRL                        ((0x19a1  << 2) + 0xff900000)
//Bit 12:0, demo left or top screen width
#define VPP2_VE_DEMO_LEFT_TOP_SCREEN_WIDTH         ((0x19a2  << 2) + 0xff900000)
#define VPP2_VE_DEMO_CENTER_BAR                    ((0x19a3  << 2) + 0xff900000)
//28:16  ve_line_length
//12:0   ve_pic_height
#define VPP2_VE_H_V_SIZE                           ((0x19a4  << 2) + 0xff900000)
//Bit 10   reset bit, high active
//Bit 9    0: measuring rising edge, 1: measuring falling edge
//Bit 8    if true, accumulate the counter number, otherwise not
//Bit 7:0  vsync_span, define how many vsync span need to measure
#define VPP2_VDO_MEAS_CTRL                         ((0x19a8  << 2) + 0xff900000)
//Read only
//19:16  ind_meas_count_n, every number of sync_span vsyncs, this counter add 1
//15:0, high bit portion of counter
#define VPP2_VDO_MEAS_VS_COUNT_HI                  ((0x19a9  << 2) + 0xff900000)
//Read only
//31:0, low bit portion of counter
#define VPP2_VDO_MEAS_VS_COUNT_LO                  ((0x19aa  << 2) + 0xff900000)
//vertical scaler phase step
//Bit 27:0,  4.24 format
#define VPP2_OSD_VSC_PHASE_STEP                    ((0x19c0  << 2) + 0xff900000)
//Bit 31:16, botttom vertical scaler initial phase
//Bit 15:0, top vertical scaler initial phase
#define VPP2_OSD_VSC_INI_PHASE                     ((0x19c1  << 2) + 0xff900000)
//Bit 24    osd vertical Scaler enable
//Bit 23    osd_prog_interlace 0: current field is progressive, 1: current field is interlace
//Bit 22:21 osd_vsc_double_line_mode, bit1, double input width and half input height, bit0, change line buffer becomes 2 lines
//Bit 20    osd_vsc_phase0_always_en
//Bit 19    osd_vsc_nearest_en
//Bit 17:16 osd_vsc_bot_rpt_l0_num
//Bit 14:11 osd_vsc_bot_ini_rcv_num
//Bit 9:8   osd_vsc_top_rpt_l0_num
//Bit 6:3   osd_vsc_top_ini_rcv_num
//Bit 2:0   osd_vsc_bank_length
#define VPP2_OSD_VSC_CTRL0                         ((0x19c2  << 2) + 0xff900000)
//horizontal scaler phase step
//Bit 27:0,  4.24 format
#define VPP2_OSD_HSC_PHASE_STEP                    ((0x19c3  << 2) + 0xff900000)
//Bit 31:16, horizontal scaler initial phase1
//Bit 15:0, horizontal scaler initial phase0
#define VPP2_OSD_HSC_INI_PHASE                     ((0x19c4  << 2) + 0xff900000)
//Bit 22   osd horizontal scaler enable
//Bit 21   osd_hsc_double_pix_mode
//Bit 20   osd_hsc_phase0_always_en
//Bit 19   osd_hsc_nearest_en
//Bit 17:16 osd_hsc_rpt_p0_num1
//Bit 14:11 osd_hsc_ini_rcv_num1
//Bit 9:8   osd_hsc_rpt_p0_num0
//Bit 6:3   osd_hsc_ini_rcv_num0
//Bit 2:0   osd_hsc_bank_length
#define VPP2_OSD_HSC_CTRL0                         ((0x19c5  << 2) + 0xff900000)
//for 3D quincunx sub-sampling
//bit 15:8 pattern, each patten 1 bit, from lsb -> msb
//bit 6:4  pattern start
//bit 2:0  pattern end
#define VPP2_OSD_HSC_INI_PAT_CTRL                  ((0x19c6  << 2) + 0xff900000)
//bit 31:24, componet 0
//bit 23:16, component 1
//bit 15:8, component 2
//bit 7:0 component 3, alpha
#define VPP2_OSD_SC_DUMMY_DATA                     ((0x19c7  << 2) + 0xff900000)
//Bit 14 osc_sc_din_osd1_alpha_mode, 1: (alpha >= 128) ? alpha -1: alpha,  0: (alpha >=1) ? alpha - 1: alpha.
//Bit 13 osc_sc_din_osd2_alpha_mode, 1: (alpha >= 128) ? alpha -1: alpha,  0: (alpha >=1) ? alpha - 1: alpha.
//Bit 12 osc_sc_dout_alpha_mode, 1: (alpha >= 128) ? alpha + 1: alpha, 0: (alpha >=1) ? alpha + 1: alpha.
//Bit 12 osc_sc_alpha_mode, 1: (alpha >= 128) ? alpha + 1: alpha, 0: (alpha >=1) ? alpha + 1: alpha.
//Bit 11:4 default alpha for vd1 or vd2 if they are selected as the source
//Bit 3 osd scaler path enable
//Bit 1:0 osd_sc_sel, 00: select osd1 input, 01: select osd2 input, 10: select vd1 input, 11: select vd2 input after matrix
#define VPP2_OSD_SC_CTRL0                          ((0x19c8  << 2) + 0xff900000)
//Bit 28:16 OSD scaler input width minus 1
//Bit 12:0 OSD scaler input height minus 1
#define VPP2_OSD_SCI_WH_M1                         ((0x19c9  << 2) + 0xff900000)
//Bit 28:16 OSD scaler output horizontal start
//Bit 12:0 OSD scaler output horizontal end
#define VPP2_OSD_SCO_H_START_END                   ((0x19ca  << 2) + 0xff900000)
//Bit 28:16 OSD scaler output vertical start
//Bit 12:0 OSD scaler output vertical end
#define VPP2_OSD_SCO_V_START_END                   ((0x19cb  << 2) + 0xff900000)
//Because there are many coefficients used in the vertical filter and horizontal filters,
//indirect access the coefficients of vertical filter and horizontal filter is used.
//For vertical filter, there are 33x4 coefficients
//For horizontal filter, there are 33x4 coefficients
//Bit 15	index increment, if bit9 == 1  then (0: index increase 1, 1: index increase 2) else (index increase 2)
//Bit 14	1: read coef through cbus enable, just for debug purpose in case when we wanna check the coef in ram in correct or not
//Bit 9     if true, use 9bit resolution coef, other use 8bit resolution coef
//Bit 8   type of index, 0: vertical coef,  1: horizontal coef
//Bit 6:0 	coef index
#define VPP2_OSD_SCALE_COEF_IDX                    ((0x19cc  << 2) + 0xff900000)
//coefficients for vertical filter and horizontal filter
#define VPP2_OSD_SCALE_COEF                        ((0x19cd  << 2) + 0xff900000)
//Bit 12:0 line number use to generate interrupt when line == this number
#define VPP2_INT_LINE_NUM                          ((0x19ce  << 2) + 0xff900000)
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  vpp2_regs.h
//
//`define VIU_VCBUS_BASE                8'h1a
//
// Reading file:  vregs_clk2.h
//
//===========================================================================
// Video Interface Registers    0xa00 - 0xaff
//===========================================================================
// -----------------------------------------------
// CBUS_BASE:  VIU_VCBUS_BASE = 0x1a
// -----------------------------------------------
#define VIU_ADDR_START                             ((0x1a00  << 2) + 0xff900000)
#define VIU_ADDR_END                               ((0x1aff  << 2) + 0xff900000)
//`define TRACE_REG 8'ff
//------------------------------------------------------------------------------
// VIU top-level registers
//------------------------------------------------------------------------------
// Bit  0 RW, osd1_reset
// Bit  1 RW, osd2_reset
// Bit  2 RW, vd1_reset
// Bit  3 RW, vd1_fmt_reset
// Bit  4 RW, vd2_reset
// Bit  5 RW, vd2_fmt_reset
// Bit  6 RW, di_dsr1to2_reset
// Bit  7 RW, vpp_reset
// Bit  8 RW, di_if1_reset
// Bit  9 RW, di_if1_fmt_reset
// Bit 10 RW, di_inp_reset
// Bit 11 RW, di_inp_fmt_reset
// Bit 12 RW, di_mem_reset
// Bit 13 RW, di_mem_fmt_reset
// Bit 14 RW, di_nr_wr_mif_reset
// Bit 15 RW, dein_wr_mif_reset
// Bit 16 RW, di_chan2_mif_reset
// Bit 17 RW, di_mtn_wr_mif_reset
// Bit 18 RW, di_mtn_rd_mif_reset
// Bit 19 RW, di_mad_reset
// Bit 20 RW, vdin0_reset
// Bit 21 RW, vdin1_reset
// Bit 22 RW, nrin_mux_reset
// Bit 23 RW, vdin0_wr_reset
// Bit 24 RW, vdin1_wr_reset
// Bit 25 RW, reserved
// Bit 26 RW, d2d3_reset
// Bit 27 RW, di_cont_wr_mif_reset
// Bit 28 RW, di_cont_rd_mif_reset
#define VIU_SW_RESET                               ((0x1a01  << 2) + 0xff900000)
#define VIU_SW_RESET0                              ((0x1a02  << 2) + 0xff900000)
// Bit 0 RW, software reset for mcvecrd_mif
// Bit 1 RW, software reset for mcinfowr_mif
// Bit 2 RW, software reset for mcinford_mif
#define VIU_SECURE_REG                             ((0x1a04  << 2) + 0xff900000)
// Bit 0 RW, dolby core1_tv secure w and r
// Bit 1 RW, dolby core2 secure w and r
// Bit 2 RW, dolby core3 secure w and r
// Bit 3 RW, for osd1 secure read
// Bit 4 RW, for osd2 secure read
#define DOLBY_INT_STAT                             ((0x1a05  << 2) + 0xff900000)
// todo
//bit 15:12 osdbld_gclk_ctrl 3:2 regclk ctrl 1:0 blending clk control
//bit 8 if true, vsync interrup is generate only field == 0
//bit 7:0 fix_disable
#define VIU_MISC_CTRL0                             ((0x1a06  << 2) + 0xff900000)
#define VIU_MISC_CTRL1                             ((0x1a07  << 2) + 0xff900000)
// Bit 15:14  mali_afbcd_gclk_ctrl      mali_afbcd clock gate control[5:4]
// Bit 12     osd1_afbcd_axi_mux        0 : use the osd mif as input; 1 : use afbcd as input
// Bit 11:8   mali_afbcd_gclk_ctrl      mali_afbcd clock gate control[3:0]
// Bit  7:2   vd2_afbcd_gclk_ctrl       vd2_afbcd clock gate control
// Bit  1     vpp_vd2_din_sel           0: vpp vd2 sel the mif input; 1: vpp vd2 sel the dos afbcd
// Bit  0     vd2_afbcd_out_sel         0: vd2_afbcd output to vpp; 1 : vd2_afbcd output to di inp
#define D2D3_INTF_LENGTH                           ((0x1a08  << 2) + 0xff900000)
// Bit 31:30 vdin0 dout splitter, bit 0 turns on vdin0 to old path, bit 1 turns on vdin0 to d2d3_intf vdin0 input path
// Bit 29:28 vdin1 dout splitter, bit 0 turns on vdin1 to old path, bit 1 turns on vdin1 to d2d3_intf vdin1 input path
// Bit 27:26 NR write dout splitter, bit 0 turns on NR write to old path, bit 1 turns on NR WR to d2d3_intf NR WR input path
// Bit 23 if true, turn on clk_d2d3_reg (register clock)
// Bit 22 if true, turn on clk_d2d3
// Bit 21 reg_v1_go_line
// Bit 20 reg_v1_go_field
// Bit 19 reg_v0_go_field
// Bit 18:16 v1_gofld_sel, 000: display go_field/go_line, 001: DI pre_frame_rst/go_line, 010: vdin0 go_field/go_line,
//011: vdin1 go_field/go_line, otherwise: force go_field by reg_v1_go_field(bit20), force go_line by reg_v1_go_line(bit21)
// Bit 15:13 v0_gofld_sel, 000: display go_field, 001: DI pre_frame_rst, 010: vdin0 go_field, 011: vdin1 go_field, otherwise: force go_field by
// reg_v0_go_field(bit19)
// Bit 12:6 hole_lines for d2d3 depth read interface
// Bit 5:4 d2d3_v1_sel, 2'b01: video display read interface(DI or vd1 fomart output), 2'b10: scale output, otherwise nothing as v1
// Bit 3 use_vdin_eol, if true, use vdin eol as the v0_eol, otherwise using length to get the v0_eol
// Bit 2:0  d2d3_v0_sel  001: vdin0, 010: vdin1, 011: NRW, 100: video display read interface(DI or vd1 fomart output), 101: vpp scale output
//
#define D2D3_INTF_CTRL0                            ((0x1a09  << 2) + 0xff900000)
//------------------------------------------------------------------------------
// OSD1 registers
//------------------------------------------------------------------------------
// Bit    31 Reserved
// Bit    30 RW, enable_free_clk: 1=use free-running clock to drive logics;
//                                0=use gated clock for low power.
// Bit    29 R, test_rd_dsr
// Bit    28 R, osd_done
// Bit 27:24 R, osd_blk_mode
// Bit 23:22 R, osd_blk_ptr
// Bit    21 R, osd_enable
//
// Bit 20:12 RW, global_alpha
// Bit    11 RW, test_rd_en
// Bit 10: 9 Reserved for control signals
// Bit  8: 5 RW, ctrl_mtch_y
// Bit     4 RW, ctrl_422to444
// Bit  3: 0 RW, osd_blk_enable. Bit 0 to enable block 0: 1=enable, 0=disable;
//                               Bit 1 to enable block 1, and so on.
#define VIU_OSD1_CTRL_STAT                         ((0x1a10  << 2) + 0xff900000)
// Bit 31:26 Reserved
// Bit 25:16 R, fifo_count
// Bit 15    RW, osd_dpath_sel   0-osd1 mif 1-vpu mali afbcd
// Bit 14    RW, replaced_alpha_en
// Bit 13: 6 RW, replaced_alpha
// Bit  5: 4 RW, hold_fifo_lines[6:5]
// Bit     3 RW, rgb2yuv_full_range
// Bit     2 RW, alpha_9b_mode
// Bit     1 RW, reserved
// Bit     0 RW, color_expand_mode
#define VIU_OSD1_CTRL_STAT2                        ((0x1a2d  << 2) + 0xff900000)
// Bit 31: 9 Reserved
// Bit     8 RW, 0 = Write LUT, 1 = Read LUT
// Bit  7: 0 RW, lut_addr
#define VIU_OSD1_COLOR_ADDR                        ((0x1a11  << 2) + 0xff900000)
// Bit 31:24 RW, Y or R
// Bit 23:16 RW, Cb or G
// Bit 15: 8 RW, Cr or B
// Bit  7: 0 RW, Alpha
#define VIU_OSD1_COLOR                             ((0x1a12  << 2) + 0xff900000)
// Bit 31:24 RW, Y or R
// Bit 23:16 RW, Cb or G
// Bit 15: 8 RW, Cr or B
// Bit  7: 0 RW, Alpha
#define VIU_OSD1_TCOLOR_AG0                        ((0x1a17  << 2) + 0xff900000)
#define VIU_OSD1_TCOLOR_AG1                        ((0x1a18  << 2) + 0xff900000)
#define VIU_OSD1_TCOLOR_AG2                        ((0x1a19  << 2) + 0xff900000)
#define VIU_OSD1_TCOLOR_AG3                        ((0x1a1a  << 2) + 0xff900000)
// Bit 31:30 Reserved
// Bit    29 RW, y_rev: 0=normal read, 1=reverse read in Y direction
// Bit    28 RW, x_rev: 0=normal read, 1=reverse read in X direction
// Bit 27:24 Reserved
// Bit 23:16 RW, tbl_addr
// Bit    15 RW, little_endian: 0=big endian, 1=little endian
// Bit    14 RW, rpt_y
// Bit 13:12 RW, interp_ctrl. 0x=No interpolation; 10=Interpolate with previous
//                            pixel; 11=Interpolate with the average value
//                            between previous and next pixel.
// Bit 11: 8 RW, osd_blk_mode
// Bit     7 RW, rgb_en
// Bit     6 RW, tc_alpha_en
// Bit  5: 2 RW, color_matrix
// Bit     1 RW, interlace_en
// Bit     0 RW, interlace_sel_odd
#define VIU_OSD1_BLK0_CFG_W0                       ((0x1a1b  << 2) + 0xff900000)
#define VIU_OSD1_BLK1_CFG_W0                       ((0x1a1f  << 2) + 0xff900000)
#define VIU_OSD1_BLK2_CFG_W0                       ((0x1a23  << 2) + 0xff900000)
#define VIU_OSD1_BLK3_CFG_W0                       ((0x1a27  << 2) + 0xff900000)
// Bit 31:29 Reserved
// Bit 28:16 RW, x_end
// Bit 15:13 Reserved
// Bit 12: 0 RW, x_start
#define VIU_OSD1_BLK0_CFG_W1                       ((0x1a1c  << 2) + 0xff900000)
#define VIU_OSD1_BLK1_CFG_W1                       ((0x1a20  << 2) + 0xff900000)
#define VIU_OSD1_BLK2_CFG_W1                       ((0x1a24  << 2) + 0xff900000)
#define VIU_OSD1_BLK3_CFG_W1                       ((0x1a28  << 2) + 0xff900000)
// Bit 31:29 Reserved
// Bit 28:16 RW, y_end
// Bit 15:13 Reserved
// Bit 12: 0 RW, y_start
#define VIU_OSD1_BLK0_CFG_W2                       ((0x1a1d  << 2) + 0xff900000)
#define VIU_OSD1_BLK1_CFG_W2                       ((0x1a21  << 2) + 0xff900000)
#define VIU_OSD1_BLK2_CFG_W2                       ((0x1a25  << 2) + 0xff900000)
#define VIU_OSD1_BLK3_CFG_W2                       ((0x1a29  << 2) + 0xff900000)
// Bit 31:28 Reserved
// Bit 27:16 RW, h_end
// Bit 15:12 Reserved
// Bit 11: 0 RW, h_start
#define VIU_OSD1_BLK0_CFG_W3                       ((0x1a1e  << 2) + 0xff900000)
#define VIU_OSD1_BLK1_CFG_W3                       ((0x1a22  << 2) + 0xff900000)
#define VIU_OSD1_BLK2_CFG_W3                       ((0x1a26  << 2) + 0xff900000)
#define VIU_OSD1_BLK3_CFG_W3                       ((0x1a2a  << 2) + 0xff900000)
// Bit 31:28 Reserved
// Bit 27:16 RW, v_end
// Bit 15:12 Reserved
// Bit 11: 0 RW, v_start
#define VIU_OSD1_BLK0_CFG_W4                       ((0x1a13  << 2) + 0xff900000)
#define VIU_OSD1_BLK1_CFG_W4                       ((0x1a14  << 2) + 0xff900000)
#define VIU_OSD1_BLK2_CFG_W4                       ((0x1a15  << 2) + 0xff900000)
#define VIU_OSD1_BLK3_CFG_W4                       ((0x1a16  << 2) + 0xff900000)
// Bit    31 RW, burst_len_sel[2] of [2:0]
// Bit    30 RW, byte_swap: In addition to endian control, further define
//               whether to swap upper and lower byte within a 16-bit mem word.
//               0=No swap; 1=Swap data[15:0] to be {data[7:0], data[15:8]}
// Bit    29 RW, div_swap : swap the 2 64bits words in 128 bit word
// Bit 28:24 RW, fifo_lim : when osd fifo is small than the fifo_lim*16, closed the rq port of osd_rd_mif
// Bit 23:22 RW, fifo_ctrl: 00 : for 1 word in 1 burst , 01 : for  2words in 1burst, 10: for 4words in 1burst, 11: reserved
// Bit 21:20 R,  fifo_st. 0=IDLE, 1=FILL, 2=ABORT
// Bit    19 R,  fifo_overflow
// Bit 18:12 RW, fifo_depth_val, max value=64: set actual fifo depth to fifo_depth_val*8.
// Bit 11:10 RW, burst_len_sel[1:0] of [2:0]. 0=24(default), 1=32, 2=48, 3=64, 4=96, 5=128.
// Bit  9: 5 RW, hold_fifo_lines[4:0]
// Bit     4 RW, clear_err: one pulse to clear fifo_overflow
// Bit     3 RW, fifo_sync_rst
// Bit  2: 1 RW, endian
// Bit     0 RW, urgent
#define VIU_OSD1_FIFO_CTRL_STAT                    ((0x1a2b  << 2) + 0xff900000)
// Bit 31:24 R, Y or R
// Bit 23:16 R, Cb or G
// Bit 15: 8 R, Cr or B
// Bit  7: 0 R, Output Alpha[8:1]
#define VIU_OSD1_TEST_RDDATA                       ((0x1a2c  << 2) + 0xff900000)
// Bit    15 RW, prot_en: 1=Borrow PROT's FIFO storage, either for rotate or non-rotate.
// Bit 12: 0 RW, effective FIFO size when prot_en=1.
#define VIU_OSD1_PROT_CTRL                         ((0x1a2e  << 2) + 0xff900000)
//Bit 7,  highlight_en
//Bit 6   probe_post, if true, probe pixel data after matrix, otherwise probe pixel data before matrix
//Bit 5:4  probe_sel, 00: select matrix 0, 01: select matrix 1,  otherwise select nothing
//Bit 3:2, matrix coef idx selection, 00: select mat0, 01: select mat1, otherwise slect nothing
//Bit 1   mat1 conversion matrix enable
//Bit 0   mat0 conversion matrix enable
#define VIU_OSD1_MATRIX_CTRL                       ((0x1a90  << 2) + 0xff900000)
//Bit 28:16 coef00
//Bit 12:0  coef01
#define VIU_OSD1_MATRIX_COEF00_01                  ((0x1a91  << 2) + 0xff900000)
//Bit 28:16 coef02
//Bit 12:0  coef10
#define VIU_OSD1_MATRIX_COEF02_10                  ((0x1a92  << 2) + 0xff900000)
//Bit 28:16 coef11
//Bit 12:0  coef12
#define VIU_OSD1_MATRIX_COEF11_12                  ((0x1a93  << 2) + 0xff900000)
//Bit 28:16 coef20
//Bit 12:0  coef21
#define VIU_OSD1_MATRIX_COEF20_21                  ((0x1a94  << 2) + 0xff900000)
//Bit 31:30    mat_clmod
//Bit 18:16    mat_convrs
//Bit 12:0     mat_coef42
#define VIU_OSD1_MATRIX_COLMOD_COEF42              ((0x1a95  << 2) + 0xff900000)
//Bit 26:16 offset0
//Bit 10:0  offset1
#define VIU_OSD1_MATRIX_OFFSET0_1                  ((0x1a96  << 2) + 0xff900000)
//Bit 10:0  offset2
#define VIU_OSD1_MATRIX_OFFSET2                    ((0x1a97  << 2) + 0xff900000)
//Bit 26:16 pre_offset0
//Bit 10:0  pre_offset1
#define VIU_OSD1_MATRIX_PRE_OFFSET0_1              ((0x1a98  << 2) + 0xff900000)
//Bit 10:0  pre_offset2
#define VIU_OSD1_MATRIX_PRE_OFFSET2                ((0x1a99  << 2) + 0xff900000)
//Read only
//Bit 29:20 component 0
//Bit 19:10 component 1
//Bit 9:0 component 2
#define VIU_OSD1_MATRIX_PROBE_COLOR                ((0x1a9a  << 2) + 0xff900000)
//Bit 23:16 component 0
//Bit 15:8  component 1
//Bit 7:0 component 2
#define VIU_OSD1_MATRIX_HL_COLOR                   ((0x1a9b  << 2) + 0xff900000)
//28:16 probe x, postion
//12:0  probe y, position
#define VIU_OSD1_MATRIX_PROBE_POS                  ((0x1a9c  << 2) + 0xff900000)
//Bit 28:16 coef22
//Bit 12:0  coef30
#define VIU_OSD1_MATRIX_COEF22_30                  ((0x1a9d  << 2) + 0xff900000)
//Bit 28:16 coef31
//Bit 12:0  coef32
#define VIU_OSD1_MATRIX_COEF31_32                  ((0x1a9e  << 2) + 0xff900000)
//Bit 28:16 coef40
//Bit 12:0  coef41
#define VIU_OSD1_MATRIX_COEF40_41                  ((0x1a9f  << 2) + 0xff900000)
//Bit 31:27 for all [31] for all eotf enable,[30] for matrix3x3 enable, [29:27] for eotf_ch0~3
//Bit 17:6  for clock gating
//Bit 5:4   pscale_mode ch2
//Bit 3:2   pscale_mode ch1
//Bit 1:0   pscale_mode ch0
#define VIU_OSD1_EOTF_CTL                          ((0x1ad4  << 2) + 0xff900000)
//Bit 28:16 coef00
//Bit 12:0  coef01
#define VIU_OSD1_EOTF_COEF00_01                    ((0x1ad5  << 2) + 0xff900000)
//Bit 28:16 coef02
//Bit 12:0  coef10
#define VIU_OSD1_EOTF_COEF02_10                    ((0x1ad6  << 2) + 0xff900000)
//Bit 28:16 coef11
//Bit 12:0  coef12
#define VIU_OSD1_EOTF_COEF11_12                    ((0x1ad7  << 2) + 0xff900000)
//Bit 28:16 coef20
//Bit 12:0  coef21
#define VIU_OSD1_EOTF_COEF20_21                    ((0x1ad8  << 2) + 0xff900000)
//Bit 28:16 coef22
//Bit   2:0 coef_rs
#define VIU_OSD1_EOTF_COEF22_RS                    ((0x1ad9  << 2) + 0xff900000)
#define VIU_OSD1_EOTF_LUT_ADDR_PORT                ((0x1ada  << 2) + 0xff900000)
#define VIU_OSD1_EOTF_LUT_DATA_PORT                ((0x1adb  << 2) + 0xff900000)
//Bit 31:29  for OETF ch0~ch2
//Bit 21:12  for clock gating
//Bit 11:8   for oetf_scl_ch2
//Bit  7:4   for oetf_scl_ch1
//Bit  3:0   for oetf_scl_ch0
#define VIU_OSD1_OETF_CTL                          ((0x1adc  << 2) + 0xff900000)
#define VIU_OSD1_OETF_LUT_ADDR_PORT                ((0x1add  << 2) + 0xff900000)
#define VIU_OSD1_OETF_LUT_DATA_PORT                ((0x1ade  << 2) + 0xff900000)
#define VIU_OSD1_OETF_3X3_OFST_0                   ((0x1aa0  << 2) + 0xff900000)
#define VIU_OSD1_OETF_3X3_OFST_1                   ((0x1aa1  << 2) + 0xff900000)
//------------------------------------------------------------------------------
// OSD2 registers
//------------------------------------------------------------------------------
// Bit    31 Reserved
// Bit    30 RW, enable_free_clk: 1=use free-running clock to drive logics;
//                                0=use gated clock for low power.
// Bit    29 R, test_rd_dsr
// Bit    28 R, osd_done
// Bit 27:24 R, osd_blk_mode
// Bit 23:22 R, osd_blk_ptr
// Bit    21 R, osd_enable
//
// Bit 20:12 RW, global_alpha
// Bit    11 RW, test_rd_en
// Bit    10 RW, hl2_en
// Bit     9 RW, hl1_en
// Bit  8: 5 RW, ctrl_mtch_y
// Bit     4 RW, ctrl_422to444
// Bit  3: 0 RW, osd_blk_enable. Bit 0 to enable block 0: 1=enable, 0=disable;
//                               Bit 1 to enable block 1, and so on.
#define VIU_OSD2_CTRL_STAT                         ((0x1a30  << 2) + 0xff900000)
// Bit 31:26 Reserved
// Bit 25:16 R, fifo_count
// Bit 15    Reserved
// Bit 14    RW, replaced_alpha_en
// Bit 13: 6 RW, replaced_alpha
// Bit  5: 4 RW, hold_fifo_lines[6:5]
// Bit     3 RW, rgb2yuv_full_range
// Bit     2 RW, alpha_9b_mode
// Bit     1 RW, reserved
// Bit     0 RW, color_expand_mode
#define VIU_OSD2_CTRL_STAT2                        ((0x1a4d  << 2) + 0xff900000)
// Bit 31: 9 Reserved
// Bit     8 RW, 0 = Write LUT, 1 = Read LUT
// Bit  7: 0 RW, lut_addr
#define VIU_OSD2_COLOR_ADDR                        ((0x1a31  << 2) + 0xff900000)
// Bit 31:24 RW, Y or R
// Bit 23:16 RW, Cb or G
// Bit 15: 8 RW, Cr or B
// Bit  7: 0 RW, Alpha
#define VIU_OSD2_COLOR                             ((0x1a32  << 2) + 0xff900000)
// Bit 31:28 Reserved
// Bit 27:16 RW, hl[1-2]_h/v_start
// Bit 15:12 Reserved
// Bit 11: 0 RW, hl[1-2]_h/v_end
#define VIU_OSD2_HL1_H_START_END                   ((0x1a33  << 2) + 0xff900000)
#define VIU_OSD2_HL1_V_START_END                   ((0x1a34  << 2) + 0xff900000)
#define VIU_OSD2_HL2_H_START_END                   ((0x1a35  << 2) + 0xff900000)
#define VIU_OSD2_HL2_V_START_END                   ((0x1a36  << 2) + 0xff900000)
// Bit 31:24 RW, Y or R
// Bit 23:16 RW, Cb or G
// Bit 15: 8 RW, Cr or B
// Bit  7: 0 RW, Alpha
#define VIU_OSD2_TCOLOR_AG0                        ((0x1a37  << 2) + 0xff900000)
#define VIU_OSD2_TCOLOR_AG1                        ((0x1a38  << 2) + 0xff900000)
#define VIU_OSD2_TCOLOR_AG2                        ((0x1a39  << 2) + 0xff900000)
#define VIU_OSD2_TCOLOR_AG3                        ((0x1a3a  << 2) + 0xff900000)
// Bit 31:24 Reserved
// Bit 23:16 RW, tbl_addr
// Bit    15 RW, little_endian: 0=big endian, 1=little endian
// Bit    14 RW, rpt_y
// Bit 13:12 RW, interp_ctrl. 0x=No interpolation; 10=Interpolate with previous
//                            pixel; 11=Interpolate with the average value
//                            between previous and next pixel.
// Bit 11: 8 RW, osd_blk_mode
// Bit     7 RW, rgb_en
// Bit     6 RW, tc_alpha_en
// Bit  5: 2 RW, color_matrix
// Bit     1 RW, interlace_en
// Bit     0 RW, interlace_sel_odd
#define VIU_OSD2_BLK0_CFG_W0                       ((0x1a3b  << 2) + 0xff900000)
#define VIU_OSD2_BLK1_CFG_W0                       ((0x1a3f  << 2) + 0xff900000)
#define VIU_OSD2_BLK2_CFG_W0                       ((0x1a43  << 2) + 0xff900000)
#define VIU_OSD2_BLK3_CFG_W0                       ((0x1a47  << 2) + 0xff900000)
// Bit 31:29 Reserved
// Bit 28:16 RW, x_end
// Bit 15:13 Reserved
// Bit 12: 0 RW, x_start
#define VIU_OSD2_BLK0_CFG_W1                       ((0x1a3c  << 2) + 0xff900000)
#define VIU_OSD2_BLK1_CFG_W1                       ((0x1a40  << 2) + 0xff900000)
#define VIU_OSD2_BLK2_CFG_W1                       ((0x1a44  << 2) + 0xff900000)
#define VIU_OSD2_BLK3_CFG_W1                       ((0x1a48  << 2) + 0xff900000)
// Bit 31:29 Reserved
// Bit 28:16 RW, y_end
// Bit 15:13 Reserved
// Bit 12: 0 RW, y_start
#define VIU_OSD2_BLK0_CFG_W2                       ((0x1a3d  << 2) + 0xff900000)
#define VIU_OSD2_BLK1_CFG_W2                       ((0x1a41  << 2) + 0xff900000)
#define VIU_OSD2_BLK2_CFG_W2                       ((0x1a45  << 2) + 0xff900000)
#define VIU_OSD2_BLK3_CFG_W2                       ((0x1a49  << 2) + 0xff900000)
// Bit 31:28 Reserved
// Bit 27:16 RW, h_end
// Bit 15:12 Reserved
// Bit 11: 0 RW, h_start
#define VIU_OSD2_BLK0_CFG_W3                       ((0x1a3e  << 2) + 0xff900000)
#define VIU_OSD2_BLK1_CFG_W3                       ((0x1a42  << 2) + 0xff900000)
#define VIU_OSD2_BLK2_CFG_W3                       ((0x1a46  << 2) + 0xff900000)
#define VIU_OSD2_BLK3_CFG_W3                       ((0x1a4a  << 2) + 0xff900000)
// Bit 31:28 Reserved
// Bit 27:16 RW, v_end
// Bit 15:12 Reserved
// Bit 11: 0 RW, v_start
#define VIU_OSD2_BLK0_CFG_W4                       ((0x1a64  << 2) + 0xff900000)
#define VIU_OSD2_BLK1_CFG_W4                       ((0x1a65  << 2) + 0xff900000)
#define VIU_OSD2_BLK2_CFG_W4                       ((0x1a66  << 2) + 0xff900000)
#define VIU_OSD2_BLK3_CFG_W4                       ((0x1a67  << 2) + 0xff900000)
// Bit    31 RW, burst_len_sel[2] of [2:0]
// Bit    30 RW, byte_swap: In addition to endian control, further define
//               whether to swap upper and lower byte within a 16-bit mem word.
//               0=No swap; 1=Swap data[15:0] to be {data[7:0], data[15:8]}
// Bit    29 RW, div_swap : swap the 2 64bits words in 128 bit word
// Bit 28:24 RW, fifo_lim : when osd fifo is small than the fifo_lim*16, closed the rq port of osd_rd_mif
// Bit 23:22 RW, fifo_ctrl: 00 : for 1 word in 1 burst , 01 : for  2words in 1burst, 10: for 4words in 1burst, 11: reserved
// Bit 21:20 R,  fifo_st. 0=IDLE, 1=FILL, 2=ABORT
// Bit    19 R,  fifo_overflow
//
// Bit 18:12 RW, fifo_depth_val, max value=64: set actual fifo depth to fifo_depth_val*8.
// Bit 11:10 RW, burst_len_sel[1:0] of [2:0]. 0=24(default), 1=32, 2=48, 3=64, 4=96, 5=128.
// Bit  9: 5 RW, hold_fifo_lines[4:0]
// Bit     4 RW, clear_err: one pulse to clear fifo_overflow
// Bit     3 RW, fifo_sync_rst
// Bit  2: 1 RW, endian
// Bit     0 RW, urgent
#define VIU_OSD2_FIFO_CTRL_STAT                    ((0x1a4b  << 2) + 0xff900000)
// Bit 31:24 R, Y or R
// Bit 23:16 R, Cb or G
// Bit 15: 8 R, Cr or B
// Bit  7: 0 R, Output Alpha[8:1]
#define VIU_OSD2_TEST_RDDATA                       ((0x1a4c  << 2) + 0xff900000)
// Bit    15 RW, prot_en: 1=Borrow PROT's FIFO storage, either for rotate or non-rotate.
// Bit 12: 0 RW, effective FIFO size when prot_en=1.
#define VIU_OSD2_PROT_CTRL                         ((0x1a4e  << 2) + 0xff900000)
//------------------------------------------------------------------------------
// VD1 path
//------------------------------------------------------------------------------
#define VD1_IF0_GEN_REG                            ((0x1a50  << 2) + 0xff900000)
#define VD1_IF0_CANVAS0                            ((0x1a51  << 2) + 0xff900000)
#define VD1_IF0_CANVAS1                            ((0x1a52  << 2) + 0xff900000)
#define VD1_IF0_LUMA_X0                            ((0x1a53  << 2) + 0xff900000)
#define VD1_IF0_LUMA_Y0                            ((0x1a54  << 2) + 0xff900000)
#define VD1_IF0_CHROMA_X0                          ((0x1a55  << 2) + 0xff900000)
#define VD1_IF0_CHROMA_Y0                          ((0x1a56  << 2) + 0xff900000)
#define VD1_IF0_LUMA_X1                            ((0x1a57  << 2) + 0xff900000)
#define VD1_IF0_LUMA_Y1                            ((0x1a58  << 2) + 0xff900000)
#define VD1_IF0_CHROMA_X1                          ((0x1a59  << 2) + 0xff900000)
#define VD1_IF0_CHROMA_Y1                          ((0x1a5a  << 2) + 0xff900000)
#define VD1_IF0_RPT_LOOP                           ((0x1a5b  << 2) + 0xff900000)
#define VD1_IF0_LUMA0_RPT_PAT                      ((0x1a5c  << 2) + 0xff900000)
#define VD1_IF0_CHROMA0_RPT_PAT                    ((0x1a5d  << 2) + 0xff900000)
#define VD1_IF0_LUMA1_RPT_PAT                      ((0x1a5e  << 2) + 0xff900000)
#define VD1_IF0_CHROMA1_RPT_PAT                    ((0x1a5f  << 2) + 0xff900000)
#define VD1_IF0_LUMA_PSEL                          ((0x1a60  << 2) + 0xff900000)
#define VD1_IF0_CHROMA_PSEL                        ((0x1a61  << 2) + 0xff900000)
#define VD1_IF0_DUMMY_PIXEL                        ((0x1a62  << 2) + 0xff900000)
#define VD1_IF0_LUMA_FIFO_SIZE                     ((0x1a63  << 2) + 0xff900000)
#define VD1_IF0_RANGE_MAP_Y                        ((0x1a6a  << 2) + 0xff900000)
#define VD1_IF0_RANGE_MAP_CB                       ((0x1a6b  << 2) + 0xff900000)
#define VD1_IF0_RANGE_MAP_CR                       ((0x1a6c  << 2) + 0xff900000)
#define VD1_IF0_GEN_REG2                           ((0x1a6d  << 2) + 0xff900000)
#define VD1_IF0_PROT_CNTL                          ((0x1a6e  << 2) + 0xff900000)
#define VD1_IF0_URGENT_CTRL                        ((0x1a6f  << 2) + 0xff900000)
//Bit 31    it true, disable clock, otherwise enable clock
//Bit 30    soft rst bit
//Bit 28    if true, horizontal formatter use repeating to generete pixel, otherwise use bilinear interpolation
//Bit 27:24 horizontal formatter initial phase
//Bit 23    horizontal formatter repeat pixel 0 enable
//Bit 22:21 horizontal Y/C ratio, 00: 1:1, 01: 2:1, 10: 4:1
//Bit 20    horizontal formatter enable
//Bit 19    if true, always use phase0 while vertical formater, meaning always
//          repeat data, no interpolation
//Bit 18    if true, disable vertical formatter chroma repeat last line
//Bit 17    veritcal formatter dont need repeat line on phase0, 1: enable, 0: disable
//Bit 16    veritcal formatter repeat line 0 enable
//Bit 15:12 vertical formatter skip line num at the beginning
//Bit 11:8  vertical formatter initial phase
//Bit 7:1   vertical formatter phase step (3.4)
//Bit 0     vertical formatter enable
#define VIU_VD1_FMT_CTRL                           ((0x1a68  << 2) + 0xff900000)
//Bit 27:16  horizontal formatter width
//Bit 11:0   vertical formatter width
#define VIU_VD1_FMT_W                              ((0x1a69  << 2) + 0xff900000)
//------------------------------------------------------------------------------
// VD2 path
//------------------------------------------------------------------------------
#define VD2_IF0_GEN_REG                            ((0x1a70  << 2) + 0xff900000)
#define VD2_IF0_CANVAS0                            ((0x1a71  << 2) + 0xff900000)
#define VD2_IF0_CANVAS1                            ((0x1a72  << 2) + 0xff900000)
#define VD2_IF0_LUMA_X0                            ((0x1a73  << 2) + 0xff900000)
#define VD2_IF0_LUMA_Y0                            ((0x1a74  << 2) + 0xff900000)
#define VD2_IF0_CHROMA_X0                          ((0x1a75  << 2) + 0xff900000)
#define VD2_IF0_CHROMA_Y0                          ((0x1a76  << 2) + 0xff900000)
#define VD2_IF0_LUMA_X1                            ((0x1a77  << 2) + 0xff900000)
#define VD2_IF0_LUMA_Y1                            ((0x1a78  << 2) + 0xff900000)
#define VD2_IF0_CHROMA_X1                          ((0x1a79  << 2) + 0xff900000)
#define VD2_IF0_CHROMA_Y1                          ((0x1a7a  << 2) + 0xff900000)
#define VD2_IF0_RPT_LOOP                           ((0x1a7b  << 2) + 0xff900000)
#define VD2_IF0_LUMA0_RPT_PAT                      ((0x1a7c  << 2) + 0xff900000)
#define VD2_IF0_CHROMA0_RPT_PAT                    ((0x1a7d  << 2) + 0xff900000)
#define VD2_IF0_LUMA1_RPT_PAT                      ((0x1a7e  << 2) + 0xff900000)
#define VD2_IF0_CHROMA1_RPT_PAT                    ((0x1a7f  << 2) + 0xff900000)
#define VD2_IF0_LUMA_PSEL                          ((0x1a80  << 2) + 0xff900000)
#define VD2_IF0_CHROMA_PSEL                        ((0x1a81  << 2) + 0xff900000)
#define VD2_IF0_DUMMY_PIXEL                        ((0x1a82  << 2) + 0xff900000)
#define VD2_IF0_LUMA_FIFO_SIZE                     ((0x1a83  << 2) + 0xff900000)
#define VD2_IF0_RANGE_MAP_Y                        ((0x1a8a  << 2) + 0xff900000)
#define VD2_IF0_RANGE_MAP_CB                       ((0x1a8b  << 2) + 0xff900000)
#define VD2_IF0_RANGE_MAP_CR                       ((0x1a8c  << 2) + 0xff900000)
#define VD2_IF0_GEN_REG2                           ((0x1a8d  << 2) + 0xff900000)
#define VD2_IF0_PROT_CNTL                          ((0x1a8e  << 2) + 0xff900000)
#define VD2_IF0_URGENT_CTRL                        ((0x1a8f  << 2) + 0xff900000)
//Bit 31    it true, disable clock, otherwise enable clock
//Bit 30    soft rst bit
//Bit 28    if true, horizontal formatter use repeating to generete pixel, otherwise use bilinear interpolation
//Bit 27:24 horizontal formatter initial phase
//Bit 23    horizontal formatter repeat pixel 0 enable
//Bit 22:21 horizontal Y/C ratio, 00: 1:1, 01: 2:1, 10: 4:1
//Bit 20    horizontal formatter enable
//Bit 17    veritcal formatter dont need repeat line on phase0, 1: enable, 0: disable
//Bit 16    veritcal formatter repeat line 0 enable
//Bit 15:12 vertical formatter skip line num at the beginning
//Bit 11:8  vertical formatter initial phase
//Bit 7:1   vertical formatter phase step (3.4)
//Bit 0     vertical formatter enable
#define VIU_VD2_FMT_CTRL                           ((0x1a88  << 2) + 0xff900000)
//Bit 27:16  horizontal formatter width
//Bit 11:0   vertical formatter width
#define VIU_VD2_FMT_W                              ((0x1a89  << 2) + 0xff900000)
//     //todo add comment
#define LDIM_STTS_GCLK_CTRL0                       ((0x1ac0  << 2) + 0xff900000)
#define LDIM_STTS_CTRL0                            ((0x1ac1  << 2) + 0xff900000)
#define LDIM_STTS_WIDTHM1_HEIGHTM1                 ((0x1ac2  << 2) + 0xff900000)
#define LDIM_STTS_MATRIX_COEF00_01                 ((0x1ac3  << 2) + 0xff900000)
#define LDIM_STTS_MATRIX_COEF02_10                 ((0x1ac4  << 2) + 0xff900000)
#define LDIM_STTS_MATRIX_COEF11_12                 ((0x1ac5  << 2) + 0xff900000)
#define LDIM_STTS_MATRIX_COEF20_21                 ((0x1ac6  << 2) + 0xff900000)
#define LDIM_STTS_MATRIX_COEF22                    ((0x1ac7  << 2) + 0xff900000)
#define LDIM_STTS_MATRIX_OFFSET0_1                 ((0x1ac8  << 2) + 0xff900000)
#define LDIM_STTS_MATRIX_OFFSET2                   ((0x1ac9  << 2) + 0xff900000)
#define LDIM_STTS_MATRIX_PRE_OFFSET0_1             ((0x1aca  << 2) + 0xff900000)
#define LDIM_STTS_MATRIX_PRE_OFFSET2               ((0x1acb  << 2) + 0xff900000)
#define LDIM_STTS_MATRIX_HL_COLOR                  ((0x1acc  << 2) + 0xff900000)
#define LDIM_STTS_MATRIX_PROBE_POS                 ((0x1acd  << 2) + 0xff900000)
//
//     //read only
#define LDIM_STTS_MATRIX_PROBE_COLOR               ((0x1ace  << 2) + 0xff900000)
//
//     //Bit 31, local dimming statistic enable
//     //Bit 29, 1: output region histogram 16bit 0:output region histogram 20bit
//     //Bit 28, eol enable
//     //Bit 27:25, vertical line overlap number for max finding
//     //Bit 24:22, horizontal pixel overlap number, 0: 17 pix, 1: 9 pix, 2: 5 pix, 3: 3 pix, 4: 0 pix
//     //Bit 20, 1,2,1 low pass filter enable before max/hist statistic
//     //Bit 19:16, region H/V position index, refer to VDIN_LDIM_STTS_HIST_SET_REGION
//     //Bit 15:14, 1: region read index auto increase per block read finished to VDIN_LDIM_STTS_HIST_READ_REGION
//     //			 2: region read index auto increase per read finished to VDIN_LDIM_STTS_HIST_READ_REGION
//     //			 0/3: disable read index self increase
//     //Bit 13:8, region read sub index, which mux the hist & max-finding result to cbus port, refer to LDIM_STTS_HIST_READ_REGION
//     //Bit 6:0, region read index
#define LDIM_STTS_HIST_REGION_IDX                  ((0x1ad0  << 2) + 0xff900000)
//Bit 28:0, if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'h0: read/write hvstart0
//			if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'h1: read/write hend01
//			if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'h2: read/write vend01
//			if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'h3: read/write hend23
//			if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'h4: read/write vend23
//			if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'h5: read/write hend45
//			if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'h6: read/write vend45
//			if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'd7: read/write hend67
//			if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'h8: read/write vend67
//			if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'h9: read/write hend89
//			if VDIN_LDIM_STTS_HIST_REGION_IDX[19:16] == 5'ha: read/write vend89
//     //hvstart0, Bit 28:16 row0 vstart, Bit 12:0 col0 hstart
//     //hend01, Bit 28:16 col1 hend, Bit 12:0 col0 hend
//     //vend01, Bit 28:16 row1 vend, Bit 12:0 row0 vend
//     //hend23, Bit 28:16 col3 hend, Bit 12:0 col2 hend
//     //vend23, Bit 28:16 row3 vend, Bit 12:0 row2 vend
//     //hend45, Bit 28:16 col5 hend, Bit 12:0 col4 hend
//     //vend45, Bit 28:16 row5 vend, Bit 12:0 row4 vend
//     //hend67, Bit 28:16 col7 hend, Bit 12:0 col6 hend
//     //vend67, Bit 28:16 row7 vend, Bit 12:0 row6 vend
//     //hend89, Bit 28:16 col9 hend, Bit 12:0 col8 hend
//     //vend89, Bit 28:16 row9 vend, Bit 12:0 row8 vend
#define LDIM_STTS_HIST_SET_REGION                  ((0x1ad1  << 2) + 0xff900000)
//
//     //if LDIM_STTS_HIST_REGION_IDX[29] == 0, that is output hist with 20bit data.
//     //if LDIM_STTS_HIST_REGION_IDX[21] == 0, that is output 16hist bins in comp 0.
//     //output sequence as rd_sub_idx from 0~47: {max_comp2, comp0_hist0}, {max_comp1, comp0_hist1}, {max_comp0, comp0_hist2},
//     //										   comp0_hist3 ... comp2_hist16
//     //if LDIM_STTS_HIST_REGION_IDX[29] == 1, that is output hist with 16bit data.
//     //if LDIM_STTS_HIST_REGION_IDX[21] == 0, that is output 16hist bins in comp 0.
//     //output sequence as rd_sub_idx from 0~47: {max_comp2, max_comp1, max_comp0}, comp0_hist0, comp0_hist1, comp0_hist2
//     //										   comp0_hist3 ... comp2_hist16
//     //if LDIM_STTS_HIST_REGION_IDX[29] == 0, that is output hist with 20bit data.
//     //if LDIM_STTS_HIST_REGION_IDX[21] == 1, that is output 32hist bins in comp 0.
//     //output sequence as rd_sub_idx from 0~47: {max_comp2, max_comp1, max_comp0}, comp0_hist0, comp0_hist1, comp0_hist2
//     //										   comp0_hist3 ...comp0_hist31 ... comp1_hist16
//
#define LDIM_STTS_HIST_READ_REGION                 ((0x1ad2  << 2) + 0xff900000)
#define LDIM_STTS_HIST_START_RD_REGION             ((0x1ad3  << 2) + 0xff900000)
//     //bit15, auto enable; bit14, canvas write mode ;7:4, high threshold ;3:0 , low threshold  for di if1 chroma path
//     //bit31, auto enable; bit30, canvas write mode ;23:20, high threshold ;19:16 , low threshold  for di if1 luma path
//     `define DI_IF1_URGENT_CTRL						8'ha3
//     //bit15, auto enable; bit14, canvas write mode ;7:4, high threshold ;3:0 , low threshold  for di inp chroma path
//     //bit31, auto enable; bit30, canvas write mode ;23:20, high threshold ;19:16 , low threshold  for di inp luma path
//     `define DI_INP_URGENT_CTRL						8'ha4
//     //bit15, auto enable; bit14, canvas write mode ;7:4, high threshold ;3:0 , low threshold  for di mem chroma path
//     //bit31, auto enable; bit30, canvas write mode ;23:20, high threshold ;19:16 , low threshold  for di mem luma path
//     `define DI_MEM_URGENT_CTRL						8'ha5
//     //bit15, auto enable; bit14, canvas write mode ;7:4, high threshold ;3:0 , low threshold  for di chan2 chroma path
//     //bit31, auto enable; bit30, canvas write mode ;23:20, high threshold ;19:16 , low threshold  for di chan2 luma path
//     `define DI_CHAN2_URGENT_CTRL					8'ha6
#define VD1_IF0_GEN_REG3                           ((0x1aa7  << 2) + 0xff900000)
//bit 31:1,  reversed
//bit 0,     cntl_64bit_rev
#define VD2_IF0_GEN_REG3                           ((0x1aa8  << 2) + 0xff900000)
//bit 31:1,  reversed
//bit 0,     cntl_64bit_rev
#define OSD_BLENDO_H_START_END                     ((0x1aa9  << 2) + 0xff900000)
//OSD blending output horizontal start and end
//Bit 28:16 start
//Bit 12:0 end
#define OSD_BLENDO_V_START_END                     ((0x1aaa  << 2) + 0xff900000)
//OSD blending output vertical start and end
//Bit 28:16 start
//Bit 12:0 end
#define OSD_BLEND_GEN_CTRL0                        ((0x1aab  << 2) + 0xff900000)
//Bit 31:23 const_out_alpha
//Bit 22:14 const_op_alpha
//Bit 13 if true, OSD2 foreground otherwise OSD1 foreground
//Bit 12  OSD BLENDing enable
//Bit 9:8 alpha_op_sel 00: output alpha use osd1_alpha, 01: use osd2_alpha, else use const_out_alpha
//Bit 5:4 color_op_sel 00: use osd1_alpha, 01: use osd2_alpha, else use const_op_alpha
//Bit 1  OSD2 enable
//Bit 0  OSD1 enable
#define OSD_BLEND_GEN_CTRL1                        ((0x1aac  << 2) + 0xff900000)
//Bit 31    osd1_alpha_premult, if true, osd1 alpha is premultipiled
//Bit 30    osd2_alpha_premult, if true, osd2 alpha is premultipiled
//Bit 23:16 osd blending hold lines
//Bit 13:0  osd blending h_size
#define OSD_BLEND_DUMMY_DATA                       ((0x1aad  << 2) + 0xff900000)
//Bit 29:20   Y/R
//Bit 19:10   CB/G
//Bit 9:0     Cr/B
#define OSD_BLEND_CURRENT_XY                       ((0x1aae  << 2) + 0xff900000)
//Bit 28:16 current_x
//Bit 12:0 current_y
//Bit 7,  highlight_en
//Bit 6   probe_post, if true, probe pixel data after matrix, otherwise probe pixel data before matrix
//Bit 5:4  probe_sel, 00: select matrix 0, 01: select matrix 1,  otherwise select nothing
//Bit 3:2, matrix coef idx selection, 00: select mat0, 01: select mat1, otherwise slect nothing
//Bit 1   mat1 conversion matrix enable
//Bit 0   mat0 conversion matrix enable
#define VIU_OSD2_MATRIX_CTRL                       ((0x1ab0  << 2) + 0xff900000)
//Bit 28:16 coef00
//Bit 12:0  coef01
#define VIU_OSD2_MATRIX_COEF00_01                  ((0x1ab1  << 2) + 0xff900000)
//Bit 28:16 coef02
//Bit 12:0  coef10
#define VIU_OSD2_MATRIX_COEF02_10                  ((0x1ab2  << 2) + 0xff900000)
//Bit 28:16 coef11
//Bit 12:0  coef12
#define VIU_OSD2_MATRIX_COEF11_12                  ((0x1ab3  << 2) + 0xff900000)
//Bit 28:16 coef20
//Bit 12:0  coef21
#define VIU_OSD2_MATRIX_COEF20_21                  ((0x1ab4  << 2) + 0xff900000)
#define VIU_OSD2_MATRIX_COEF22                     ((0x1ab5  << 2) + 0xff900000)
//Bit 26:16 offset0
//Bit 10:0  offset1
#define VIU_OSD2_MATRIX_OFFSET0_1                  ((0x1ab6  << 2) + 0xff900000)
//Bit 10:0  offset2
#define VIU_OSD2_MATRIX_OFFSET2                    ((0x1ab7  << 2) + 0xff900000)
//Bit 26:16 pre_offset0
//Bit 10:0  pre_offset1
#define VIU_OSD2_MATRIX_PRE_OFFSET0_1              ((0x1ab8  << 2) + 0xff900000)
//Bit 10:0  pre_offset2
#define VIU_OSD2_MATRIX_PRE_OFFSET2                ((0x1ab9  << 2) + 0xff900000)
//Read only
//Bit 29:20 component 0
//Bit 19:10 component 1
//Bit 9:0 component 2
#define VIU_OSD2_MATRIX_PROBE_COLOR                ((0x1aba  << 2) + 0xff900000)
//Bit 23:16 component 0
//Bit 15:8  component 1
//Bit 7:0 component 2
#define VIU_OSD2_MATRIX_HL_COLOR                   ((0x1abb  << 2) + 0xff900000)
//28:16 probe x, postion
//12:0  probe y, position
#define VIU_OSD2_MATRIX_PROBE_POS                  ((0x1abc  << 2) + 0xff900000)
//the segment of afbc dec is 8'he0-8'hfe
//`define AFBC_DEC_OFFSET   8'he0
//
// Reading file:  afbc_dec_regs.h
//
// synopsys translate_off
// synopsys translate_on
////===============================////
//// reg
////===============================////
#define AFBC_ENABLE                                ((0x1ae0  << 2) + 0xff900000)
//Bit   31:1,     reserved
//Bit   8,        dec_enable        unsigned  , default = 0
//Bit   7:1,      reserved
//Bit   0,        frm_start         unsigned  , default = 0
#define AFBC_MODE                                  ((0x1ae1  << 2) + 0xff900000)
//Bit   31,       soft_reset        the use as go_field
//Bit   30,       reserved
//Bit   29,       ddr_sz_mode       uns, default = 0 , 0: fixed block ddr size 1 : unfixed block ddr size;
//Bit   28,       blk_mem_mode      uns, default = 0 , 0: fixed 16x128 size; 1 : fixed 12x128 size
//Bit   27:26,    rev_mode          uns, default = 0 , reverse mode
//Bit   25:24,    mif_urgent        uns, default = 3 , info mif and data mif urgent
//Bit   22:16,    hold_line_num
//Bit   15:14,    burst_len         uns, default = 1, 0: burst1 1:burst2 2:burst4
//Bit   13:8,     compbits_yuv      uns, default = 0 ,
//                                  bit 1:0,: y  component bitwidth : 00-8bit 01-9bit 10-10bit
//                                  bit 3:2,: u  component bitwidth : 00-8bit 01-9bit 10-10bit
//                                  bit 5:4,: v  component bitwidth : 00-8bit 01-9bit 10-10bit
//Bit   7:6,      vert_skip_y       uns, default = 0 , luma vert skip mode : 00-y0y1, 01-y0, 10-y1, 11-(y0+y1)/2
//Bit   5:4,      horz_skip_y       uns, default = 0 , luma horz skip mode : 00-y0y1, 01-y0, 10-y1, 11-(y0+y1)/2
//Bit   3:2,      vert_skip_uv      uns, default = 0 , chroma vert skip mode : 00-y0y1, 01-y0, 10-y1, 11-(y0+y1)/2
//Bit   1:0,      horz_skip_uv      uns, default = 0 , chroma horz skip mode : 00-y0y1, 01-y0, 10-y1, 11-(y0+y1)/2
#define AFBC_SIZE_IN                               ((0x1ae2  << 2) + 0xff900000)
//Bit   31:29,    reserved
//Bit   28:16     hsize_in          uns, default = 1920 , pic horz size in  unit: pixel
//Bit   15:13,    reserved
//Bit   12:0,     vsize_in          uns, default = 1080 , pic vert size in  unit: pixel
#define AFBC_DEC_DEF_COLOR                         ((0x1ae3  << 2) + 0xff900000)
//Bit   31:29,    reserved
//Bit   29:20,   def_color_y        uns, default = 0, afbc dec y default setting value
//Bit   19:10,   def_color_u        uns, default = 0, afbc dec u default setting value
//Bit    9: 0,   def_color_v        uns, default = 0, afbc dec v default setting value
#define AFBC_CONV_CTRL                             ((0x1ae4  << 2) + 0xff900000)
//Bit   31:12,   reserved
//Bit   11: 0,   conv_lbuf_len       uns, default = 256, unit=16 pixel need to set = 2^n
#define AFBC_LBUF_DEPTH                            ((0x1ae5  << 2) + 0xff900000)
//Bit   31:28,   reserved
//Bit   27:16,   dec_lbuf_depth      uns, default = 128; // unit= 8 pixel
//Bit   15:12,   reserved
//Bit   11:0,    mif_lbuf_depth      uns, default = 128;
#define AFBC_HEAD_BADDR                            ((0x1ae6  << 2) + 0xff900000)
//Bit   31:0,   mif_info_baddr      uns, default = 32'h0;
#define AFBC_BODY_BADDR                            ((0x1ae7  << 2) + 0xff900000)
//Bit   31:0,   mif_data_baddr      uns, default = 32'h0001_0000;
#define AFBC_SIZE_OUT                              ((0x1ae8  << 2) + 0xff900000)
//Bit   31:29,   reserved
//Bit   28:16,   hsize_out           uns, default = 1920    ; // unit: 1 pixel
//Bit   15:13,   reserved
//Bit    12:0,   vsize_out           uns, default = 1080 ; // unit: 1 pixel
#define AFBC_OUT_YSCOPE                            ((0x1ae9  << 2) + 0xff900000)
//Bit   31:29,   reserved
//Bit   28:16,   out_vert_bgn        uns, default = 0    ; // unit: 1 pixel
//Bit   15:13,   reserved
//Bit    12:0,   out_vert_end        uns, default = 1079 ; // unit: 1 pixel
#define AFBC_STAT                                  ((0x1aea  << 2) + 0xff900000)
//Bit   31:1,   reserved
//Bit      0,   frm_end_stat         uns, frame end status
#define AFBC_VD_CFMT_CTRL                          ((0x1aeb  << 2) + 0xff900000)
//Bit 31    it true, disable clock, otherwise enable clock
//Bit 30    soft rst bit
//Bit 28    if true, horizontal formatter use repeating to generete pixel, otherwise use bilinear interpolation
//Bit 27:24 horizontal formatter initial phase
//Bit 23    horizontal formatter repeat pixel 0 enable
//Bit 22:21 horizontal Y/C ratio, 00: 1:1, 01: 2:1, 10: 4:1
//Bit 20    horizontal formatter enable
//Bit 19    if true, always use phase0 while vertical formater, meaning always
//          repeat data, no interpolation
//Bit 18    if true, disable vertical formatter chroma repeat last line
//Bit 17    veritcal formatter dont need repeat line on phase0, 1: enable, 0: disable
//Bit 16    veritcal formatter repeat line 0 enable
//Bit 15:12 vertical formatter skip line num at the beginning
//Bit 11:8  vertical formatter initial phase
//Bit 7:1   vertical formatter phase step (3.4)
//Bit 0     vertical formatter enable
#define AFBC_VD_CFMT_W                             ((0x1aec  << 2) + 0xff900000)
//Bit 27:16  horizontal formatter width
//Bit 11:0   vertical formatter width
#define AFBC_MIF_HOR_SCOPE                         ((0x1aed  << 2) + 0xff900000)
//Bit   31:26,   reserved
//Bit   25:16,   mif_blk_bgn_h        uns, default = 0  ; // unit: 32 pixel/block hor
//Bit   15:10,   reserved
//Bit    9: 0,   mif_blk_end_h        uns, default = 59 ; // unit: 32 pixel/block hor
#define AFBC_MIF_VER_SCOPE                         ((0x1aee  << 2) + 0xff900000)
//Bit   31:28,   reserved
//Bit   27:16,   mif_blk_bgn_v        uns, default = 0  ; // unit: 32 pixel/block ver
//Bit   15:12,   reserved
//Bit   11: 0,   mif_blk_end_v        uns, default = 269; // unit: 32 pixel/block ver
#define AFBC_PIXEL_HOR_SCOPE                       ((0x1aef  << 2) + 0xff900000)
//Bit   31:29,   reserved
//Bit   28:16,   dec_pixel_bgn_h        uns, default = 0  ; // unit: pixel
//Bit   15:13,   reserved
//Bit   12: 0,   dec_pixel_end_h        uns, default = 1919 ; // unit: pixel
#define AFBC_PIXEL_VER_SCOPE                       ((0x1af0  << 2) + 0xff900000)
//Bit   31:29,   reserved
//Bit   28:16,   dec_pixel_bgn_v        uns, default = 0  ; // unit: pixel
//Bit   15:13,   reserved
//Bit   12: 0,   dec_pixel_end_v        uns, default = 1079 ; // unit: pixel
#define AFBC_VD_CFMT_H                             ((0x1af1  << 2) + 0xff900000)
//Bit 12:0   vertical formatter height
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  afbc_dec_regs.h
//
//
// Closing file:  vregs_clk2.h
//
//`define  VENC_VCBUS_BASE              8'h1b
//
// Reading file:  venc_regs.h
//
//===========================================================================
// Video Interface Registers    0xa00 - 0xbff
//===========================================================================
// -----------------------------------------------
// CBUS_BASE:  VENC_VCBUS_BASE = 0x1b
// -----------------------------------------------
// bit 15:8 -- vfifo2vd_vd_sel
// bit 0 -- vfifo2vd_en
#define ENCP_VFIFO2VD_CTL                          ((0x1b58  << 2) + 0xff900000)
// bit 12:0 -- vfifo2vd_pixel_start
#define ENCP_VFIFO2VD_PIXEL_START                  ((0x1b59  << 2) + 0xff900000)
// bit 12:00 -- vfifo2vd_pixel_end
#define ENCP_VFIFO2VD_PIXEL_END                    ((0x1b5a  << 2) + 0xff900000)
// bit 10:0 -- vfifo2vd_line_top_start
#define ENCP_VFIFO2VD_LINE_TOP_START               ((0x1b5b  << 2) + 0xff900000)
// bit 10:00 -- vfifo2vd_line_top_end
#define ENCP_VFIFO2VD_LINE_TOP_END                 ((0x1b5c  << 2) + 0xff900000)
// bit 10:00 -- vfifo2vd_line_bot_start
#define ENCP_VFIFO2VD_LINE_BOT_START               ((0x1b5d  << 2) + 0xff900000)
// bit 10:00 -- vfifo2vd_line_bot_end
#define ENCP_VFIFO2VD_LINE_BOT_END                 ((0x1b5e  << 2) + 0xff900000)
// Route the hsync and vsync signals round the chip. There are three
// sources and users of these signals: VIU, internal video encoder, and
// the pins on the chip. Some muxing is still being done in the VIU. It
// was not moved to the venc module so that the same exact VIU code could
// be used both in Twister and Twister2000.
// Bit 2: venc_sync_source (1=>pins, 0=>viu)
// Bit 1: viu_sync_source (1=>pins, 0=>venc)
// Bit 0: vpins_sync_source (1=>venc, 0=>viu)
#define VENC_SYNC_ROUTE                            ((0x1b60  << 2) + 0xff900000)
#define VENC_VIDEO_EXSRC                           ((0x1b61  << 2) + 0xff900000)
#define VENC_DVI_SETTING                           ((0x1b62  << 2) + 0xff900000)
#define VENC_C656_CTRL                             ((0x1b63  << 2) + 0xff900000)
#define VENC_UPSAMPLE_CTRL0                        ((0x1b64  << 2) + 0xff900000)
#define VENC_UPSAMPLE_CTRL1                        ((0x1b65  << 2) + 0xff900000)
#define VENC_UPSAMPLE_CTRL2                        ((0x1b66  << 2) + 0xff900000)
// Invert control for tcon output
// bit[15:14] -- vsync, hsync,
// bit[13:0] --  oev3, oev2, cpv2, cph3, cph2, cph1, oeh, vcom, stv2, stv1, cpv1, oev1, sth1, sth2
#define TCON_INVERT_CTL                            ((0x1b67  << 2) + 0xff900000)
#define VENC_VIDEO_PROG_MODE                       ((0x1b68  << 2) + 0xff900000)
//---- Venc pixel/line info
#define VENC_ENCI_LINE                             ((0x1b69  << 2) + 0xff900000)
#define VENC_ENCI_PIXEL                            ((0x1b6a  << 2) + 0xff900000)
#define VENC_ENCP_LINE                             ((0x1b6b  << 2) + 0xff900000)
#define VENC_ENCP_PIXEL                            ((0x1b6c  << 2) + 0xff900000)
//---- Status
#define VENC_STATA                                 ((0x1b6d  << 2) + 0xff900000)
//---- Interrupt setting
#define VENC_INTCTRL                               ((0x1b6e  << 2) + 0xff900000)
#define VENC_INTFLAG                               ((0x1b6f  << 2) + 0xff900000)
//--------- Video test configuration
#define VENC_VIDEO_TST_EN                          ((0x1b70  << 2) + 0xff900000)
#define VENC_VIDEO_TST_MDSEL                       ((0x1b71  << 2) + 0xff900000)
#define VENC_VIDEO_TST_Y                           ((0x1b72  << 2) + 0xff900000)
#define VENC_VIDEO_TST_CB                          ((0x1b73  << 2) + 0xff900000)
#define VENC_VIDEO_TST_CR                          ((0x1b74  << 2) + 0xff900000)
#define VENC_VIDEO_TST_CLRBAR_STRT                 ((0x1b75  << 2) + 0xff900000)
#define VENC_VIDEO_TST_CLRBAR_WIDTH                ((0x1b76  << 2) + 0xff900000)
#define VENC_VIDEO_TST_VDCNT_STSET                 ((0x1b77  << 2) + 0xff900000)
//----- Video dac setting
#define VENC_VDAC_DACSEL0                          ((0x1b78  << 2) + 0xff900000)
#define VENC_VDAC_DACSEL1                          ((0x1b79  << 2) + 0xff900000)
#define VENC_VDAC_DACSEL2                          ((0x1b7a  << 2) + 0xff900000)
#define VENC_VDAC_DACSEL3                          ((0x1b7b  << 2) + 0xff900000)
#define VENC_VDAC_DACSEL4                          ((0x1b7c  << 2) + 0xff900000)
#define VENC_VDAC_DACSEL5                          ((0x1b7d  << 2) + 0xff900000)
#define VENC_VDAC_SETTING                          ((0x1b7e  << 2) + 0xff900000)
#define VENC_VDAC_TST_VAL                          ((0x1b7f  << 2) + 0xff900000)
#define VENC_VDAC_DAC0_GAINCTRL                    ((0x1bf0  << 2) + 0xff900000)
#define VENC_VDAC_DAC0_OFFSET                      ((0x1bf1  << 2) + 0xff900000)
#define VENC_VDAC_DAC1_GAINCTRL                    ((0x1bf2  << 2) + 0xff900000)
#define VENC_VDAC_DAC1_OFFSET                      ((0x1bf3  << 2) + 0xff900000)
#define VENC_VDAC_DAC2_GAINCTRL                    ((0x1bf4  << 2) + 0xff900000)
#define VENC_VDAC_DAC2_OFFSET                      ((0x1bf5  << 2) + 0xff900000)
#define VENC_VDAC_DAC3_GAINCTRL                    ((0x1bf6  << 2) + 0xff900000)
#define VENC_VDAC_DAC3_OFFSET                      ((0x1bf7  << 2) + 0xff900000)
#define VENC_VDAC_DAC4_GAINCTRL                    ((0x1bf8  << 2) + 0xff900000)
#define VENC_VDAC_DAC4_OFFSET                      ((0x1bf9  << 2) + 0xff900000)
#define VENC_VDAC_DAC5_GAINCTRL                    ((0x1bfa  << 2) + 0xff900000)
#define VENC_VDAC_DAC5_OFFSET                      ((0x1bfb  << 2) + 0xff900000)
#define VENC_VDAC_FIFO_CTRL                        ((0x1bfc  << 2) + 0xff900000)
#define ENCL_TCON_INVERT_CTL                       ((0x1bfd  << 2) + 0xff900000)
//
// Closing file:  venc_regs.h
//
//
// Reading file:  enc480p_regs.h
//
// synopsys translate_off
// synopsys translate_on
//===========================================================================
// Video Encoder 480p Registers    0xb80 - 0xbef
//===========================================================================
//-------- Video basic setting
#define ENCP_VIDEO_EN                              ((0x1b80  << 2) + 0xff900000)
#define ENCP_VIDEO_SYNC_MODE                       ((0x1b81  << 2) + 0xff900000)
#define ENCP_MACV_EN                               ((0x1b82  << 2) + 0xff900000)
#define ENCP_VIDEO_Y_SCL                           ((0x1b83  << 2) + 0xff900000)
#define ENCP_VIDEO_PB_SCL                          ((0x1b84  << 2) + 0xff900000)
#define ENCP_VIDEO_PR_SCL                          ((0x1b85  << 2) + 0xff900000)
#define ENCP_VIDEO_SYNC_SCL                        ((0x1b86  << 2) + 0xff900000)
#define ENCP_VIDEO_MACV_SCL                        ((0x1b87  << 2) + 0xff900000)
#define ENCP_VIDEO_Y_OFFST                         ((0x1b88  << 2) + 0xff900000)
#define ENCP_VIDEO_PB_OFFST                        ((0x1b89  << 2) + 0xff900000)
#define ENCP_VIDEO_PR_OFFST                        ((0x1b8a  << 2) + 0xff900000)
#define ENCP_VIDEO_SYNC_OFFST                      ((0x1b8b  << 2) + 0xff900000)
#define ENCP_VIDEO_MACV_OFFST                      ((0x1b8c  << 2) + 0xff900000)
//----- Video mode
#define ENCP_VIDEO_MODE                            ((0x1b8d  << 2) + 0xff900000)
#define ENCP_VIDEO_MODE_ADV                        ((0x1b8e  << 2) + 0xff900000)
//--------------- Debug pins
#define ENCP_DBG_PX_RST                            ((0x1b90  << 2) + 0xff900000)
#define ENCP_DBG_LN_RST                            ((0x1b91  << 2) + 0xff900000)
#define ENCP_DBG_PX_INT                            ((0x1b92  << 2) + 0xff900000)
#define ENCP_DBG_LN_INT                            ((0x1b93  << 2) + 0xff900000)
//----------- Video Advanced setting
#define ENCP_VIDEO_YFP1_HTIME                      ((0x1b94  << 2) + 0xff900000)
#define ENCP_VIDEO_YFP2_HTIME                      ((0x1b95  << 2) + 0xff900000)
#define ENCP_VIDEO_YC_DLY                          ((0x1b96  << 2) + 0xff900000)
#define ENCP_VIDEO_MAX_PXCNT                       ((0x1b97  << 2) + 0xff900000)
#define ENCP_VIDEO_HSPULS_BEGIN                    ((0x1b98  << 2) + 0xff900000)
#define ENCP_VIDEO_HSPULS_END                      ((0x1b99  << 2) + 0xff900000)
#define ENCP_VIDEO_HSPULS_SWITCH                   ((0x1b9a  << 2) + 0xff900000)
#define ENCP_VIDEO_VSPULS_BEGIN                    ((0x1b9b  << 2) + 0xff900000)
#define ENCP_VIDEO_VSPULS_END                      ((0x1b9c  << 2) + 0xff900000)
#define ENCP_VIDEO_VSPULS_BLINE                    ((0x1b9d  << 2) + 0xff900000)
#define ENCP_VIDEO_VSPULS_ELINE                    ((0x1b9e  << 2) + 0xff900000)
#define ENCP_VIDEO_EQPULS_BEGIN                    ((0x1b9f  << 2) + 0xff900000)
#define ENCP_VIDEO_EQPULS_END                      ((0x1ba0  << 2) + 0xff900000)
#define ENCP_VIDEO_EQPULS_BLINE                    ((0x1ba1  << 2) + 0xff900000)
#define ENCP_VIDEO_EQPULS_ELINE                    ((0x1ba2  << 2) + 0xff900000)
#define ENCP_VIDEO_HAVON_END                       ((0x1ba3  << 2) + 0xff900000)
#define ENCP_VIDEO_HAVON_BEGIN                     ((0x1ba4  << 2) + 0xff900000)
#define ENCP_VIDEO_VAVON_ELINE                     ((0x1baf  << 2) + 0xff900000)
#define ENCP_VIDEO_VAVON_BLINE                     ((0x1ba6  << 2) + 0xff900000)
#define ENCP_VIDEO_HSO_BEGIN                       ((0x1ba7  << 2) + 0xff900000)
#define ENCP_VIDEO_HSO_END                         ((0x1ba8  << 2) + 0xff900000)
#define ENCP_VIDEO_VSO_BEGIN                       ((0x1ba9  << 2) + 0xff900000)
#define ENCP_VIDEO_VSO_END                         ((0x1baa  << 2) + 0xff900000)
#define ENCP_VIDEO_VSO_BLINE                       ((0x1bab  << 2) + 0xff900000)
#define ENCP_VIDEO_VSO_ELINE                       ((0x1bac  << 2) + 0xff900000)
#define ENCP_VIDEO_SYNC_WAVE_CURVE                 ((0x1bad  << 2) + 0xff900000)
#define ENCP_VIDEO_MAX_LNCNT                       ((0x1bae  << 2) + 0xff900000)
#define ENCP_VIDEO_SY_VAL                          ((0x1bb0  << 2) + 0xff900000)
#define ENCP_VIDEO_SY2_VAL                         ((0x1bb1  << 2) + 0xff900000)
#define ENCP_VIDEO_BLANKY_VAL                      ((0x1bb2  << 2) + 0xff900000)
#define ENCP_VIDEO_BLANKPB_VAL                     ((0x1bb3  << 2) + 0xff900000)
#define ENCP_VIDEO_BLANKPR_VAL                     ((0x1bb4  << 2) + 0xff900000)
#define ENCP_VIDEO_HOFFST                          ((0x1bb5  << 2) + 0xff900000)
#define ENCP_VIDEO_VOFFST                          ((0x1bb6  << 2) + 0xff900000)
#define ENCP_VIDEO_RGB_CTRL                        ((0x1bb7  << 2) + 0xff900000)
#define ENCP_VIDEO_FILT_CTRL                       ((0x1bb8  << 2) + 0xff900000)
#define ENCP_VIDEO_OFLD_VPEQ_OFST                  ((0x1bb9  << 2) + 0xff900000)
#define ENCP_VIDEO_OFLD_VOAV_OFST                  ((0x1bba  << 2) + 0xff900000)
#define ENCP_VIDEO_MATRIX_CB                       ((0x1bbb  << 2) + 0xff900000)
#define ENCP_VIDEO_MATRIX_CR                       ((0x1bbc  << 2) + 0xff900000)
#define ENCP_VIDEO_RGBIN_CTRL                      ((0x1bbd  << 2) + 0xff900000)
//------------------Macrovision advanced setting
#define ENCP_MACV_BLANKY_VAL                       ((0x1bc0  << 2) + 0xff900000)
#define ENCP_MACV_MAXY_VAL                         ((0x1bc1  << 2) + 0xff900000)
#define ENCP_MACV_1ST_PSSYNC_STRT                  ((0x1bc2  << 2) + 0xff900000)
#define ENCP_MACV_PSSYNC_STRT                      ((0x1bc3  << 2) + 0xff900000)
#define ENCP_MACV_AGC_STRT                         ((0x1bc4  << 2) + 0xff900000)
#define ENCP_MACV_AGC_END                          ((0x1bc5  << 2) + 0xff900000)
#define ENCP_MACV_WAVE_END                         ((0x1bc6  << 2) + 0xff900000)
#define ENCP_MACV_STRTLINE                         ((0x1bc7  << 2) + 0xff900000)
#define ENCP_MACV_ENDLINE                          ((0x1bc8  << 2) + 0xff900000)
#define ENCP_MACV_TS_CNT_MAX_L                     ((0x1bc9  << 2) + 0xff900000)
#define ENCP_MACV_TS_CNT_MAX_H                     ((0x1bca  << 2) + 0xff900000)
#define ENCP_MACV_TIME_DOWN                        ((0x1bcb  << 2) + 0xff900000)
#define ENCP_MACV_TIME_LO                          ((0x1bcc  << 2) + 0xff900000)
#define ENCP_MACV_TIME_UP                          ((0x1bcd  << 2) + 0xff900000)
#define ENCP_MACV_TIME_RST                         ((0x1bce  << 2) + 0xff900000)
//---------------- VBI control -------------------
#define ENCP_VBI_CTRL                              ((0x1bd0  << 2) + 0xff900000)
#define ENCP_VBI_SETTING                           ((0x1bd1  << 2) + 0xff900000)
#define ENCP_VBI_BEGIN                             ((0x1bd2  << 2) + 0xff900000)
#define ENCP_VBI_WIDTH                             ((0x1bd3  << 2) + 0xff900000)
#define ENCP_VBI_HVAL                              ((0x1bd4  << 2) + 0xff900000)
#define ENCP_VBI_DATA0                             ((0x1bd5  << 2) + 0xff900000)
#define ENCP_VBI_DATA1                             ((0x1bd6  << 2) + 0xff900000)
//----------------C656 OUT Control------------- Grant
#define C656_HS_ST                                 ((0x1be0  << 2) + 0xff900000)
#define C656_HS_ED                                 ((0x1be1  << 2) + 0xff900000)
#define C656_VS_LNST_E                             ((0x1be2  << 2) + 0xff900000)
#define C656_VS_LNST_O                             ((0x1be3  << 2) + 0xff900000)
#define C656_VS_LNED_E                             ((0x1be4  << 2) + 0xff900000)
#define C656_VS_LNED_O                             ((0x1be5  << 2) + 0xff900000)
#define C656_FS_LNST                               ((0x1be6  << 2) + 0xff900000)
#define C656_FS_LNED                               ((0x1be7  << 2) + 0xff900000)
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  enc480p_regs.h
//
//
// Reading file:  enci_regs.h
//
//===========================================================================
// Video Interface Registers    0xb00 - 0xb57
//===========================================================================
#define ENCI_VIDEO_MODE                            ((0x1b00  << 2) + 0xff900000)
#define ENCI_VIDEO_MODE_ADV                        ((0x1b01  << 2) + 0xff900000)
#define ENCI_VIDEO_FSC_ADJ                         ((0x1b02  << 2) + 0xff900000)
#define ENCI_VIDEO_BRIGHT                          ((0x1b03  << 2) + 0xff900000)
#define ENCI_VIDEO_CONT                            ((0x1b04  << 2) + 0xff900000)
#define ENCI_VIDEO_SAT                             ((0x1b05  << 2) + 0xff900000)
#define ENCI_VIDEO_HUE                             ((0x1b06  << 2) + 0xff900000)
#define ENCI_VIDEO_SCH                             ((0x1b07  << 2) + 0xff900000)
#define ENCI_SYNC_MODE                             ((0x1b08  << 2) + 0xff900000)
#define ENCI_SYNC_CTRL                             ((0x1b09  << 2) + 0xff900000)
#define ENCI_SYNC_HSO_BEGIN                        ((0x1b0a  << 2) + 0xff900000)
#define ENCI_SYNC_HSO_END                          ((0x1b0b  << 2) + 0xff900000)
#define ENCI_SYNC_VSO_EVN                          ((0x1b0c  << 2) + 0xff900000)
#define ENCI_SYNC_VSO_ODD                          ((0x1b0d  << 2) + 0xff900000)
#define ENCI_SYNC_VSO_EVNLN                        ((0x1b0e  << 2) + 0xff900000)
#define ENCI_SYNC_VSO_ODDLN                        ((0x1b0f  << 2) + 0xff900000)
#define ENCI_SYNC_HOFFST                           ((0x1b10  << 2) + 0xff900000)
#define ENCI_SYNC_VOFFST                           ((0x1b11  << 2) + 0xff900000)
#define ENCI_SYNC_ADJ                              ((0x1b12  << 2) + 0xff900000)
#define ENCI_RGB_SETTING                           ((0x1b13  << 2) + 0xff900000)
//`define	ENCI_CMPN_MATRIX_CB		8'h14
//`define	ENCI_CMPN_MATRIX_CR		8'h15
#define ENCI_DE_H_BEGIN                            ((0x1b16  << 2) + 0xff900000)
#define ENCI_DE_H_END                              ((0x1b17  << 2) + 0xff900000)
#define ENCI_DE_V_BEGIN_EVEN                       ((0x1b18  << 2) + 0xff900000)
#define ENCI_DE_V_END_EVEN                         ((0x1b19  << 2) + 0xff900000)
#define ENCI_DE_V_BEGIN_ODD                        ((0x1b1a  << 2) + 0xff900000)
#define ENCI_DE_V_END_ODD                          ((0x1b1b  << 2) + 0xff900000)
#define ENCI_VBI_SETTING                           ((0x1b20  << 2) + 0xff900000)
#define ENCI_VBI_CCDT_EVN                          ((0x1b21  << 2) + 0xff900000)
#define ENCI_VBI_CCDT_ODD                          ((0x1b22  << 2) + 0xff900000)
#define ENCI_VBI_CC525_LN                          ((0x1b23  << 2) + 0xff900000)
#define ENCI_VBI_CC625_LN                          ((0x1b24  << 2) + 0xff900000)
#define ENCI_VBI_WSSDT                             ((0x1b25  << 2) + 0xff900000)
#define ENCI_VBI_WSS_LN                            ((0x1b26  << 2) + 0xff900000)
#define ENCI_VBI_CGMSDT_L                          ((0x1b27  << 2) + 0xff900000)
#define ENCI_VBI_CGMSDT_H                          ((0x1b28  << 2) + 0xff900000)
#define ENCI_VBI_CGMS_LN                           ((0x1b29  << 2) + 0xff900000)
#define ENCI_VBI_TTX_HTIME                         ((0x1b2a  << 2) + 0xff900000)
#define ENCI_VBI_TTX_LN                            ((0x1b2b  << 2) + 0xff900000)
#define ENCI_VBI_TTXDT0                            ((0x1b2c  << 2) + 0xff900000)
#define ENCI_VBI_TTXDT1                            ((0x1b2d  << 2) + 0xff900000)
#define ENCI_VBI_TTXDT2                            ((0x1b2e  << 2) + 0xff900000)
#define ENCI_VBI_TTXDT3                            ((0x1b2f  << 2) + 0xff900000)
#define ENCI_MACV_N0                               ((0x1b30  << 2) + 0xff900000)
#define ENCI_MACV_N1                               ((0x1b31  << 2) + 0xff900000)
#define ENCI_MACV_N2                               ((0x1b32  << 2) + 0xff900000)
#define ENCI_MACV_N3                               ((0x1b33  << 2) + 0xff900000)
#define ENCI_MACV_N4                               ((0x1b34  << 2) + 0xff900000)
#define ENCI_MACV_N5                               ((0x1b35  << 2) + 0xff900000)
#define ENCI_MACV_N6                               ((0x1b36  << 2) + 0xff900000)
#define ENCI_MACV_N7                               ((0x1b37  << 2) + 0xff900000)
#define ENCI_MACV_N8                               ((0x1b38  << 2) + 0xff900000)
#define ENCI_MACV_N9                               ((0x1b39  << 2) + 0xff900000)
#define ENCI_MACV_N10                              ((0x1b3a  << 2) + 0xff900000)
#define ENCI_MACV_N11                              ((0x1b3b  << 2) + 0xff900000)
#define ENCI_MACV_N12                              ((0x1b3c  << 2) + 0xff900000)
#define ENCI_MACV_N13                              ((0x1b3d  << 2) + 0xff900000)
#define ENCI_MACV_N14                              ((0x1b3e  << 2) + 0xff900000)
#define ENCI_MACV_N15                              ((0x1b3f  << 2) + 0xff900000)
#define ENCI_MACV_N16                              ((0x1b40  << 2) + 0xff900000)
#define ENCI_MACV_N17                              ((0x1b41  << 2) + 0xff900000)
#define ENCI_MACV_N18                              ((0x1b42  << 2) + 0xff900000)
#define ENCI_MACV_N19                              ((0x1b43  << 2) + 0xff900000)
#define ENCI_MACV_N20                              ((0x1b44  << 2) + 0xff900000)
#define ENCI_MACV_N21                              ((0x1b45  << 2) + 0xff900000)
#define ENCI_MACV_N22                              ((0x1b46  << 2) + 0xff900000)
//`define	ENCI_MACV_P_AGC			8'h47
#define ENCI_DBG_PX_RST                            ((0x1b48  << 2) + 0xff900000)
#define ENCI_DBG_FLDLN_RST                         ((0x1b49  << 2) + 0xff900000)
#define ENCI_DBG_PX_INT                            ((0x1b4a  << 2) + 0xff900000)
#define ENCI_DBG_FLDLN_INT                         ((0x1b4b  << 2) + 0xff900000)
#define ENCI_DBG_MAXPX                             ((0x1b4c  << 2) + 0xff900000)
#define ENCI_DBG_MAXLN                             ((0x1b4d  << 2) + 0xff900000)
#define ENCI_MACV_MAX_AMP                          ((0x1b50  << 2) + 0xff900000)
#define ENCI_MACV_PULSE_LO                         ((0x1b51  << 2) + 0xff900000)
#define ENCI_MACV_PULSE_HI                         ((0x1b52  << 2) + 0xff900000)
#define ENCI_MACV_BKP_MAX                          ((0x1b53  << 2) + 0xff900000)
#define ENCI_CFILT_CTRL                            ((0x1b54  << 2) + 0xff900000)
#define ENCI_CFILT7                                ((0x1b55  << 2) + 0xff900000)
#define ENCI_YC_DELAY                              ((0x1b56  << 2) + 0xff900000)
#define ENCI_VIDEO_EN                              ((0x1b57  << 2) + 0xff900000)
//
// Closing file:  enci_regs.h
//
//`define  VENC2_VCBUS_BASE             8'h1c
//
// Reading file:  venc2_regs.h
//
//===========================================================================
// Venc Registers (Cont.)    0xc00 - 0xcff (VENC registers 0xc00 - 0xcef)
//===========================================================================
// -----------------------------------------------
// CBUS_BASE:  VENC2_VCBUS_BASE = 0x1c
// -----------------------------------------------
// Program video control signals from ENCI core to DVI/HDMI interface
#define ENCI_DVI_HSO_BEGIN                         ((0x1c00  << 2) + 0xff900000)
#define ENCI_DVI_HSO_END                           ((0x1c01  << 2) + 0xff900000)
#define ENCI_DVI_VSO_BLINE_EVN                     ((0x1c02  << 2) + 0xff900000)
#define ENCI_DVI_VSO_BLINE_ODD                     ((0x1c03  << 2) + 0xff900000)
#define ENCI_DVI_VSO_ELINE_EVN                     ((0x1c04  << 2) + 0xff900000)
#define ENCI_DVI_VSO_ELINE_ODD                     ((0x1c05  << 2) + 0xff900000)
#define ENCI_DVI_VSO_BEGIN_EVN                     ((0x1c06  << 2) + 0xff900000)
#define ENCI_DVI_VSO_BEGIN_ODD                     ((0x1c07  << 2) + 0xff900000)
#define ENCI_DVI_VSO_END_EVN                       ((0x1c08  << 2) + 0xff900000)
#define ENCI_DVI_VSO_END_ODD                       ((0x1c09  << 2) + 0xff900000)
// Define cmpt and cvbs cb/cr delay after ENCI chroma filters
// Bit 15:12 RW, enci_cb_cvbs_dly_sel. 0=no delay; 1~6=delay by 1~6 clk; 7~15 reserved.
// Bit 11: 8 RW, enci_cr_cvbs_dly_sel. 0=no delay; 1~6=delay by 1~6 clk; 7~15 reserved.
// Bit  7: 4 RW, enci_cb_cmpt_dly_sel. 0=no delay; 1~6=delay by 1~6 clk; 7~15 reserved.
// Bit  3: 0 RW, enci_cr_cmpt_dly_sel. 0=no delay; 1~6=delay by 1~6 clk; 7~15 reserved.
#define ENCI_CFILT_CTRL2                           ((0x1c0a  << 2) + 0xff900000)
#define ENCI_DACSEL_0                              ((0x1c0b  << 2) + 0xff900000)
#define ENCI_DACSEL_1                              ((0x1c0c  << 2) + 0xff900000)
#define ENCP_DACSEL_0                              ((0x1c0d  << 2) + 0xff900000)
#define ENCP_DACSEL_1                              ((0x1c0e  << 2) + 0xff900000)
#define ENCP_MAX_LINE_SWITCH_POINT                 ((0x1c0f  << 2) + 0xff900000)
#define ENCI_TST_EN                                ((0x1c10  << 2) + 0xff900000)
#define ENCI_TST_MDSEL                             ((0x1c11  << 2) + 0xff900000)
#define ENCI_TST_Y                                 ((0x1c12  << 2) + 0xff900000)
#define ENCI_TST_CB                                ((0x1c13  << 2) + 0xff900000)
#define ENCI_TST_CR                                ((0x1c14  << 2) + 0xff900000)
#define ENCI_TST_CLRBAR_STRT                       ((0x1c15  << 2) + 0xff900000)
#define ENCI_TST_CLRBAR_WIDTH                      ((0x1c16  << 2) + 0xff900000)
#define ENCI_TST_VDCNT_STSET                       ((0x1c17  << 2) + 0xff900000)
// bit 15:8 -- vfifo2vd_vd_sel
// bit 7 -- vfifo2vd_drop
// bit 6:1 -- vfifo2vd_delay
// bit 0 -- vfifo2vd_en
#define ENCI_VFIFO2VD_CTL                          ((0x1c18  << 2) + 0xff900000)
// bit 12:0 -- vfifo2vd_pixel_start
#define ENCI_VFIFO2VD_PIXEL_START                  ((0x1c19  << 2) + 0xff900000)
// bit 12:00 -- vfifo2vd_pixel_end
#define ENCI_VFIFO2VD_PIXEL_END                    ((0x1c1a  << 2) + 0xff900000)
// bit 10:0 -- vfifo2vd_line_top_start
#define ENCI_VFIFO2VD_LINE_TOP_START               ((0x1c1b  << 2) + 0xff900000)
// bit 10:00 -- vfifo2vd_line_top_end
#define ENCI_VFIFO2VD_LINE_TOP_END                 ((0x1c1c  << 2) + 0xff900000)
// bit 10:00 -- vfifo2vd_line_bot_start
#define ENCI_VFIFO2VD_LINE_BOT_START               ((0x1c1d  << 2) + 0xff900000)
// bit 10:00 -- vfifo2vd_line_bot_end
#define ENCI_VFIFO2VD_LINE_BOT_END                 ((0x1c1e  << 2) + 0xff900000)
#define ENCI_VFIFO2VD_CTL2                         ((0x1c1f  << 2) + 0xff900000)
// bit 15:8 -- vfifo2vd_vd_sel
// bit 7 -- vfifo2vd_drop
// bit 6:1 -- vfifo2vd_delay
// bit 0 -- vfifo2vd_en
#define ENCT_VFIFO2VD_CTL                          ((0x1c20  << 2) + 0xff900000)
// bit 12:0 -- vfifo2vd_pixel_start
#define ENCT_VFIFO2VD_PIXEL_START                  ((0x1c21  << 2) + 0xff900000)
// bit 12:00 -- vfifo2vd_pixel_end
#define ENCT_VFIFO2VD_PIXEL_END                    ((0x1c22  << 2) + 0xff900000)
// bit 10:0 -- vfifo2vd_line_top_start
#define ENCT_VFIFO2VD_LINE_TOP_START               ((0x1c23  << 2) + 0xff900000)
// bit 10:00 -- vfifo2vd_line_top_end
#define ENCT_VFIFO2VD_LINE_TOP_END                 ((0x1c24  << 2) + 0xff900000)
// bit 10:00 -- vfifo2vd_line_bot_start
#define ENCT_VFIFO2VD_LINE_BOT_START               ((0x1c25  << 2) + 0xff900000)
// bit 10:00 -- vfifo2vd_line_bot_end
#define ENCT_VFIFO2VD_LINE_BOT_END                 ((0x1c26  << 2) + 0xff900000)
#define ENCT_VFIFO2VD_CTL2                         ((0x1c27  << 2) + 0xff900000)
#define ENCT_TST_EN                                ((0x1c28  << 2) + 0xff900000)
#define ENCT_TST_MDSEL                             ((0x1c29  << 2) + 0xff900000)
#define ENCT_TST_Y                                 ((0x1c2a  << 2) + 0xff900000)
#define ENCT_TST_CB                                ((0x1c2b  << 2) + 0xff900000)
#define ENCT_TST_CR                                ((0x1c2c  << 2) + 0xff900000)
#define ENCT_TST_CLRBAR_STRT                       ((0x1c2d  << 2) + 0xff900000)
#define ENCT_TST_CLRBAR_WIDTH                      ((0x1c2e  << 2) + 0xff900000)
#define ENCT_TST_VDCNT_STSET                       ((0x1c2f  << 2) + 0xff900000)
// Program video control signals from ENCP core to DVI/HDMI interface
#define ENCP_DVI_HSO_BEGIN                         ((0x1c30  << 2) + 0xff900000)
#define ENCP_DVI_HSO_END                           ((0x1c31  << 2) + 0xff900000)
#define ENCP_DVI_VSO_BLINE_EVN                     ((0x1c32  << 2) + 0xff900000)
#define ENCP_DVI_VSO_BLINE_ODD                     ((0x1c33  << 2) + 0xff900000)
#define ENCP_DVI_VSO_ELINE_EVN                     ((0x1c34  << 2) + 0xff900000)
#define ENCP_DVI_VSO_ELINE_ODD                     ((0x1c35  << 2) + 0xff900000)
#define ENCP_DVI_VSO_BEGIN_EVN                     ((0x1c36  << 2) + 0xff900000)
#define ENCP_DVI_VSO_BEGIN_ODD                     ((0x1c37  << 2) + 0xff900000)
#define ENCP_DVI_VSO_END_EVN                       ((0x1c38  << 2) + 0xff900000)
#define ENCP_DVI_VSO_END_ODD                       ((0x1c39  << 2) + 0xff900000)
#define ENCP_DE_H_BEGIN                            ((0x1c3a  << 2) + 0xff900000)
#define ENCP_DE_H_END                              ((0x1c3b  << 2) + 0xff900000)
#define ENCP_DE_V_BEGIN_EVEN                       ((0x1c3c  << 2) + 0xff900000)
#define ENCP_DE_V_END_EVEN                         ((0x1c3d  << 2) + 0xff900000)
#define ENCP_DE_V_BEGIN_ODD                        ((0x1c3e  << 2) + 0xff900000)
#define ENCP_DE_V_END_ODD                          ((0x1c3f  << 2) + 0xff900000)
// Bit 15:11 - sync length
// Bit 10:0 - sync start line
#define ENCI_SYNC_LINE_LENGTH                      ((0x1c40  << 2) + 0xff900000)
// Bit 15 - sync_pulse_enable
// Bit 12:0 - sync start pixel
#define ENCI_SYNC_PIXEL_EN                         ((0x1c41  << 2) + 0xff900000)
// Bit 15 - enci_sync_enable
// Bit 14 - encp_sync_enable
// Bit 13 - enct_sync_enable
// Bit 12 - short_fussy_sync
// Bit 11 - fussy_sync_enable
// Bit 10:0 - sync target line
#define ENCI_SYNC_TO_LINE_EN                       ((0x1c42  << 2) + 0xff900000)
// Bit 12:0 - sync target pixel
#define ENCI_SYNC_TO_PIXEL                         ((0x1c43  << 2) + 0xff900000)
// Bit 15:11 - sync length
// Bit 10:0 - sync start line
#define ENCP_SYNC_LINE_LENGTH                      ((0x1c44  << 2) + 0xff900000)
// Bit 15 - sync_pulse_enable
// Bit 12:0 - sync start pixel
#define ENCP_SYNC_PIXEL_EN                         ((0x1c45  << 2) + 0xff900000)
// Bit 15 - enci_sync_enable
// Bit 14 - encp_sync_enable
// Bit 13 - enct_sync_enable
// Bit 12 - short_fussy_sync
// Bit 11 - fussy_sync_enable
// Bit 10:0 - sync target line
#define ENCP_SYNC_TO_LINE_EN                       ((0x1c46  << 2) + 0xff900000)
// Bit 12:0 - sync target pixel
#define ENCP_SYNC_TO_PIXEL                         ((0x1c47  << 2) + 0xff900000)
// Bit 15:11 - sync length
// Bit 10:0 - sync start line
#define ENCT_SYNC_LINE_LENGTH                      ((0x1c48  << 2) + 0xff900000)
// Bit 15 - sync_pulse_enable
// Bit 12:0 - sync start pixel
#define ENCT_SYNC_PIXEL_EN                         ((0x1c49  << 2) + 0xff900000)
// Bit 15 - enci_sync_enable
// Bit 14 - encp_sync_enable
// Bit 13 - enct_sync_enable
// Bit 12 - short_fussy_sync
// Bit 11 - fussy_sync_enable
// Bit 10:0 - sync target line
#define ENCT_SYNC_TO_LINE_EN                       ((0x1c4a  << 2) + 0xff900000)
// Bit 12:0 - sync target pixel
#define ENCT_SYNC_TO_PIXEL                         ((0x1c4b  << 2) + 0xff900000)
// Bit 15:11 - sync length
// Bit 10:0 - sync start line
#define ENCL_SYNC_LINE_LENGTH                      ((0x1c4c  << 2) + 0xff900000)
// Bit 15 - sync_pulse_enable
// Bit 12:0 - sync start pixel
#define ENCL_SYNC_PIXEL_EN                         ((0x1c4d  << 2) + 0xff900000)
// Bit 15 - enci_sync_enable
// Bit 14 - encp_sync_enable
// Bit 13 - enct_sync_enable
// Bit 12 - short_fussy_sync
// Bit 11 - fussy_sync_enable
// Bit 10:0 - sync target line
#define ENCL_SYNC_TO_LINE_EN                       ((0x1c4e  << 2) + 0xff900000)
// Bit 12:0 - sync target pixel
#define ENCL_SYNC_TO_PIXEL                         ((0x1c4f  << 2) + 0xff900000)
// bit    3 cfg_encp_lcd_scaler_bypass. 1=Do not scale LCD input data;
//                                      0=Scale LCD input data to y [16*4,235*4], c [16*4,240*4].
// bit    2 cfg_encp_vadj_scaler_bypass. 1=Do not scale data to enc480p_vadj;
//                                       0=Scale enc480p_vadj input data to y [16*4,235*4], c [16*4,240*4].
// bit    1 cfg_vfifo2vd_out_scaler_bypass. 1=Do not scale vfifo2vd's output vdata;
//                                          0=Scale vfifo2vd's output vdata to y [16,235], c [16,240].
// bit    0 cfg_vfifo_din_full_range. 1=Data from viu fifo is full range [0,1023];
//                                    0=Data from viu fifo is y [16*4,235*4], c [16*4,240*4].
#define ENCP_VFIFO2VD_CTL2                         ((0x1c50  << 2) + 0xff900000)
// bit 15:1 Reserved.
// bit    0 cfg_int_dvi_sel_rgb. Applicable for using on-chip hdmi tx module only. This bit controls correct bit-mapping from
//          Venc to hdmi_tx depending on whether YCbCr or RGB mode.
//                               1=Map data bit from Venc to hdmi_tx for RGB mode;
//                               0=Default. Map data bit from Venc to hdmi_tx for YCbCr mode.
#define VENC_DVI_SETTING_MORE                      ((0x1c51  << 2) + 0xff900000)
#define VENC_VDAC_DAC4_FILT_CTRL0                  ((0x1c54  << 2) + 0xff900000)
#define VENC_VDAC_DAC4_FILT_CTRL1                  ((0x1c55  << 2) + 0xff900000)
#define VENC_VDAC_DAC5_FILT_CTRL0                  ((0x1c56  << 2) + 0xff900000)
#define VENC_VDAC_DAC5_FILT_CTRL1                  ((0x1c57  << 2) + 0xff900000)
//Bit 0   filter_en
#define VENC_VDAC_DAC0_FILT_CTRL0                  ((0x1c58  << 2) + 0xff900000)
//dout = ((din + din_d2) * coef1 + (din_d1 * coef0) + 32) >> 6
//Bit 15:8, coef1,
//Bit 7:0, coef0,
#define VENC_VDAC_DAC0_FILT_CTRL1                  ((0x1c59  << 2) + 0xff900000)
//Bit 0   filter_en
#define VENC_VDAC_DAC1_FILT_CTRL0                  ((0x1c5a  << 2) + 0xff900000)
//dout = ((din + din_d2) * coef1 + (din_d1 * coef0) + 32) >> 6
//Bit 15:8, coef1,
//Bit 7:0, coef0,
#define VENC_VDAC_DAC1_FILT_CTRL1                  ((0x1c5b  << 2) + 0xff900000)
//Bit 0   filter_en
#define VENC_VDAC_DAC2_FILT_CTRL0                  ((0x1c5c  << 2) + 0xff900000)
//dout = ((din + din_d2) * coef1 + (din_d1 * coef0) + 32) >> 6
//Bit 15:8, coef1,
//Bit 7:0, coef0,
#define VENC_VDAC_DAC2_FILT_CTRL1                  ((0x1c5d  << 2) + 0xff900000)
//Bit 0   filter_en
#define VENC_VDAC_DAC3_FILT_CTRL0                  ((0x1c5e  << 2) + 0xff900000)
//dout = ((din + din_d2) * coef1 + (din_d1 * coef0) + 32) >> 6
//Bit 15:8, coef1,
//Bit 7:0, coef0,
#define VENC_VDAC_DAC3_FILT_CTRL1                  ((0x1c5f  << 2) + 0xff900000)
//===========================================================================
// ENCT registers
#define ENCT_VIDEO_EN                              ((0x1c60  << 2) + 0xff900000)
#define ENCT_VIDEO_Y_SCL                           ((0x1c61  << 2) + 0xff900000)
#define ENCT_VIDEO_PB_SCL                          ((0x1c62  << 2) + 0xff900000)
#define ENCT_VIDEO_PR_SCL                          ((0x1c63  << 2) + 0xff900000)
#define ENCT_VIDEO_Y_OFFST                         ((0x1c64  << 2) + 0xff900000)
#define ENCT_VIDEO_PB_OFFST                        ((0x1c65  << 2) + 0xff900000)
#define ENCT_VIDEO_PR_OFFST                        ((0x1c66  << 2) + 0xff900000)
//----- Video mode
#define ENCT_VIDEO_MODE                            ((0x1c67  << 2) + 0xff900000)
#define ENCT_VIDEO_MODE_ADV                        ((0x1c68  << 2) + 0xff900000)
//--------------- Debug pins
#define ENCT_DBG_PX_RST                            ((0x1c69  << 2) + 0xff900000)
#define ENCT_DBG_LN_RST                            ((0x1c6a  << 2) + 0xff900000)
#define ENCT_DBG_PX_INT                            ((0x1c6b  << 2) + 0xff900000)
#define ENCT_DBG_LN_INT                            ((0x1c6c  << 2) + 0xff900000)
//----------- Video Advanced setting
#define ENCT_VIDEO_YFP1_HTIME                      ((0x1c6d  << 2) + 0xff900000)
#define ENCT_VIDEO_YFP2_HTIME                      ((0x1c6e  << 2) + 0xff900000)
#define ENCT_VIDEO_YC_DLY                          ((0x1c6f  << 2) + 0xff900000)
#define ENCT_VIDEO_MAX_PXCNT                       ((0x1c70  << 2) + 0xff900000)
#define ENCT_VIDEO_HAVON_END                       ((0x1c71  << 2) + 0xff900000)
#define ENCT_VIDEO_HAVON_BEGIN                     ((0x1c72  << 2) + 0xff900000)
#define ENCT_VIDEO_VAVON_ELINE                     ((0x1c73  << 2) + 0xff900000)
#define ENCT_VIDEO_VAVON_BLINE                     ((0x1c74  << 2) + 0xff900000)
#define ENCT_VIDEO_HSO_BEGIN                       ((0x1c75  << 2) + 0xff900000)
#define ENCT_VIDEO_HSO_END                         ((0x1c76  << 2) + 0xff900000)
#define ENCT_VIDEO_VSO_BEGIN                       ((0x1c77  << 2) + 0xff900000)
#define ENCT_VIDEO_VSO_END                         ((0x1c78  << 2) + 0xff900000)
#define ENCT_VIDEO_VSO_BLINE                       ((0x1c79  << 2) + 0xff900000)
#define ENCT_VIDEO_VSO_ELINE                       ((0x1c7a  << 2) + 0xff900000)
#define ENCT_VIDEO_MAX_LNCNT                       ((0x1c7b  << 2) + 0xff900000)
#define ENCT_VIDEO_BLANKY_VAL                      ((0x1c7c  << 2) + 0xff900000)
#define ENCT_VIDEO_BLANKPB_VAL                     ((0x1c7d  << 2) + 0xff900000)
#define ENCT_VIDEO_BLANKPR_VAL                     ((0x1c7e  << 2) + 0xff900000)
#define ENCT_VIDEO_HOFFST                          ((0x1c7f  << 2) + 0xff900000)
#define ENCT_VIDEO_VOFFST                          ((0x1c80  << 2) + 0xff900000)
#define ENCT_VIDEO_RGB_CTRL                        ((0x1c81  << 2) + 0xff900000)
#define ENCT_VIDEO_FILT_CTRL                       ((0x1c82  << 2) + 0xff900000)
#define ENCT_VIDEO_OFLD_VPEQ_OFST                  ((0x1c83  << 2) + 0xff900000)
#define ENCT_VIDEO_OFLD_VOAV_OFST                  ((0x1c84  << 2) + 0xff900000)
#define ENCT_VIDEO_MATRIX_CB                       ((0x1c85  << 2) + 0xff900000)
#define ENCT_VIDEO_MATRIX_CR                       ((0x1c86  << 2) + 0xff900000)
#define ENCT_VIDEO_RGBIN_CTRL                      ((0x1c87  << 2) + 0xff900000)
#define ENCT_MAX_LINE_SWITCH_POINT                 ((0x1c88  << 2) + 0xff900000)
#define ENCT_DACSEL_0                              ((0x1c89  << 2) + 0xff900000)
#define ENCT_DACSEL_1                              ((0x1c8a  << 2) + 0xff900000)
//===========================================================================
// For ENCL
//===========================================================================
// bit 15:8 -- vfifo2vd_vd_sel
// bit 7 -- vfifo2vd_drop
// bit 6:1 -- vfifo2vd_delay
// bit 0 -- vfifo2vd_en
#define ENCL_VFIFO2VD_CTL                          ((0x1c90  << 2) + 0xff900000)
// bit 12:0 -- vfifo2vd_pixel_start
#define ENCL_VFIFO2VD_PIXEL_START                  ((0x1c91  << 2) + 0xff900000)
// bit 12:00 -- vfifo2vd_pixel_end
#define ENCL_VFIFO2VD_PIXEL_END                    ((0x1c92  << 2) + 0xff900000)
// bit 10:0 -- vfifo2vd_line_top_start
#define ENCL_VFIFO2VD_LINE_TOP_START               ((0x1c93  << 2) + 0xff900000)
// bit 10:00 -- vfifo2vd_line_top_end
#define ENCL_VFIFO2VD_LINE_TOP_END                 ((0x1c94  << 2) + 0xff900000)
// bit 10:00 -- vfifo2vd_line_bot_start
#define ENCL_VFIFO2VD_LINE_BOT_START               ((0x1c95  << 2) + 0xff900000)
// bit 10:00 -- vfifo2vd_line_bot_end
#define ENCL_VFIFO2VD_LINE_BOT_END                 ((0x1c96  << 2) + 0xff900000)
#define ENCL_VFIFO2VD_CTL2                         ((0x1c97  << 2) + 0xff900000)
#define ENCL_TST_EN                                ((0x1c98  << 2) + 0xff900000)
#define ENCL_TST_MDSEL                             ((0x1c99  << 2) + 0xff900000)
#define ENCL_TST_Y                                 ((0x1c9a  << 2) + 0xff900000)
#define ENCL_TST_CB                                ((0x1c9b  << 2) + 0xff900000)
#define ENCL_TST_CR                                ((0x1c9c  << 2) + 0xff900000)
#define ENCL_TST_CLRBAR_STRT                       ((0x1c9d  << 2) + 0xff900000)
#define ENCL_TST_CLRBAR_WIDTH                      ((0x1c9e  << 2) + 0xff900000)
#define ENCL_TST_VDCNT_STSET                       ((0x1c9f  << 2) + 0xff900000)
//===========================================================================
// ENCL registers
#define ENCL_VIDEO_EN                              ((0x1ca0  << 2) + 0xff900000)
#define ENCL_VIDEO_Y_SCL                           ((0x1ca1  << 2) + 0xff900000)
#define ENCL_VIDEO_PB_SCL                          ((0x1ca2  << 2) + 0xff900000)
#define ENCL_VIDEO_PR_SCL                          ((0x1ca3  << 2) + 0xff900000)
#define ENCL_VIDEO_Y_OFFST                         ((0x1ca4  << 2) + 0xff900000)
#define ENCL_VIDEO_PB_OFFST                        ((0x1ca5  << 2) + 0xff900000)
#define ENCL_VIDEO_PR_OFFST                        ((0x1ca6  << 2) + 0xff900000)
//----- Video mode
#define ENCL_VIDEO_MODE                            ((0x1ca7  << 2) + 0xff900000)
#define ENCL_VIDEO_MODE_ADV                        ((0x1ca8  << 2) + 0xff900000)
//--------------- Debug pins
#define ENCL_DBG_PX_RST                            ((0x1ca9  << 2) + 0xff900000)
#define ENCL_DBG_LN_RST                            ((0x1caa  << 2) + 0xff900000)
#define ENCL_DBG_PX_INT                            ((0x1cab  << 2) + 0xff900000)
#define ENCL_DBG_LN_INT                            ((0x1cac  << 2) + 0xff900000)
//----------- Video Advanced setting
#define ENCL_VIDEO_YFP1_HTIME                      ((0x1cad  << 2) + 0xff900000)
#define ENCL_VIDEO_YFP2_HTIME                      ((0x1cae  << 2) + 0xff900000)
#define ENCL_VIDEO_YC_DLY                          ((0x1caf  << 2) + 0xff900000)
#define ENCL_VIDEO_MAX_PXCNT                       ((0x1cb0  << 2) + 0xff900000)
#define ENCL_VIDEO_HAVON_END                       ((0x1cb1  << 2) + 0xff900000)
#define ENCL_VIDEO_HAVON_BEGIN                     ((0x1cb2  << 2) + 0xff900000)
#define ENCL_VIDEO_VAVON_ELINE                     ((0x1cb3  << 2) + 0xff900000)
#define ENCL_VIDEO_VAVON_BLINE                     ((0x1cb4  << 2) + 0xff900000)
#define ENCL_VIDEO_HSO_BEGIN                       ((0x1cb5  << 2) + 0xff900000)
#define ENCL_VIDEO_HSO_END                         ((0x1cb6  << 2) + 0xff900000)
#define ENCL_VIDEO_VSO_BEGIN                       ((0x1cb7  << 2) + 0xff900000)
#define ENCL_VIDEO_VSO_END                         ((0x1cb8  << 2) + 0xff900000)
#define ENCL_VIDEO_VSO_BLINE                       ((0x1cb9  << 2) + 0xff900000)
#define ENCL_VIDEO_VSO_ELINE                       ((0x1cba  << 2) + 0xff900000)
#define ENCL_VIDEO_MAX_LNCNT                       ((0x1cbb  << 2) + 0xff900000)
#define ENCL_VIDEO_BLANKY_VAL                      ((0x1cbc  << 2) + 0xff900000)
#define ENCL_VIDEO_BLANKPB_VAL                     ((0x1cbd  << 2) + 0xff900000)
#define ENCL_VIDEO_BLANKPR_VAL                     ((0x1cbe  << 2) + 0xff900000)
#define ENCL_VIDEO_HOFFST                          ((0x1cbf  << 2) + 0xff900000)
#define ENCL_VIDEO_VOFFST                          ((0x1cc0  << 2) + 0xff900000)
#define ENCL_VIDEO_RGB_CTRL                        ((0x1cc1  << 2) + 0xff900000)
#define ENCL_VIDEO_FILT_CTRL                       ((0x1cc2  << 2) + 0xff900000)
#define ENCL_VIDEO_OFLD_VPEQ_OFST                  ((0x1cc3  << 2) + 0xff900000)
#define ENCL_VIDEO_OFLD_VOAV_OFST                  ((0x1cc4  << 2) + 0xff900000)
#define ENCL_VIDEO_MATRIX_CB                       ((0x1cc5  << 2) + 0xff900000)
#define ENCL_VIDEO_MATRIX_CR                       ((0x1cc6  << 2) + 0xff900000)
#define ENCL_VIDEO_RGBIN_CTRL                      ((0x1cc7  << 2) + 0xff900000)
#define ENCL_MAX_LINE_SWITCH_POINT                 ((0x1cc8  << 2) + 0xff900000)
#define ENCL_DACSEL_0                              ((0x1cc9  << 2) + 0xff900000)
#define ENCL_DACSEL_1                              ((0x1cca  << 2) + 0xff900000)
//
// Closing file:  venc2_regs.h
//
//`define VPP_VCBUS_BASE			     8'h1d
//
// Reading file:  vpp_regs.h
//
// synopsys translate_off
// synopsys translate_on
// -----------------------------------------------
// CBUS_BASE:  VPP_VCBUS_BASE = 0x1d
// -----------------------------------------------
//===========================================================================
// Video postprocesing Registers
//===========================================================================
// dummy data used in the VPP preblend and scaler
// Bit 23:16    Y
// Bit 15:8     CB
// Bit 7:0      CR
#define VPP_DUMMY_DATA                             ((0x1d00  << 2) + 0xff900000)
//input line length used in VPP
#define VPP_LINE_IN_LENGTH                         ((0x1d01  << 2) + 0xff900000)
//input Picture height used in VPP
#define VPP_PIC_IN_HEIGHT                          ((0x1d02  << 2) + 0xff900000)
//Because there are many coefficients used in the vertical filter and horizontal filters,
//indirect access the coefficients of vertical filter and horizontal filter is used.
//For vertical filter, there are 33x4 coefficients
//For horizontal filter, there are 33x4 coefficients
//Bit 15	index increment, if bit9 == 1  then (0: index increase 1, 1: index increase 2) else (index increase 2)
//Bit 14	1: read coef through cbus enable, just for debug purpose in case when we wanna check the coef in ram in correct or not
//Bit 13    if true, vertical separated coef enable
//Bit 9     if true, use 9bit resolution coef, other use 8bit resolution coef
//Bit 8:7   type of index, 00: vertical coef, 01: vertical chroma coef: 10: horizontal coef, 11: resevered
//Bit 6:0 	coef index
#define VPP_SCALE_COEF_IDX                         ((0x1d03  << 2) + 0xff900000)
//coefficients for vertical filter and horizontal filter
#define VPP_SCALE_COEF                             ((0x1d04  << 2) + 0xff900000)
//these following registers are the absolute line address pointer for output divided screen
//The output divided screen is shown in the following:
//
//  --------------------------   <------ line zero
//		.
//		.
//		.		    region0        <---------- nonlinear region or nonscaling region
//		.
//  ---------------------------
//  ---------------------------  <------ region1_startp
//		.
//		.           region1         <---------- nonlinear region
//		.
//		.
//  ---------------------------
//  ---------------------------  <------ region2_startp
//		.
//		.           region2         <---------- linear region
//		.
//		.
//  ---------------------------
//  ---------------------------  <------ region3_startp
//		.
//		.           region3         <---------- nonlinear region
//		.
//		.
//  ---------------------------
//  ---------------------------  <------ region4_startp
//		.
//		.           region4         <---------- nonlinear region or nonoscaling region
//		.
//		.
//  ---------------------------  <------ region4_endp
//Bit 28:16 region1 startp
//Bit 12:0 region2 startp
#define VPP_VSC_REGION12_STARTP                    ((0x1d05  << 2) + 0xff900000)
//Bit 28:16 region3 startp
//Bit 12:0 region4 startp
#define VPP_VSC_REGION34_STARTP                    ((0x1d06  << 2) + 0xff900000)
#define VPP_VSC_REGION4_ENDP                       ((0x1d07  << 2) + 0xff900000)
//vertical start phase step, (source/dest)*(2^24)
//Bit 27:24 integer part
//Bit 23:0	fraction part
#define VPP_VSC_START_PHASE_STEP                   ((0x1d08  << 2) + 0xff900000)
//vertical scaler region0 phase slope, Bit24 signed bit
#define VPP_VSC_REGION0_PHASE_SLOPE                ((0x1d09  << 2) + 0xff900000)
//vertical scaler region1 phase slope, Bit24 signed bit
#define VPP_VSC_REGION1_PHASE_SLOPE                ((0x1d0a  << 2) + 0xff900000)
//vertical scaler region3 phase slope, Bit24 signed bit
#define VPP_VSC_REGION3_PHASE_SLOPE                ((0x1d0b  << 2) + 0xff900000)
//vertical scaler region4 phase slope, Bit24 signed bit
#define VPP_VSC_REGION4_PHASE_SLOPE                ((0x1d0c  << 2) + 0xff900000)
//Bit 18:17     double line mode, input/output line width of vscaler becomes 2X,
//           so only 2 line buffer in this case, use for 3D line by line interleave scaling
//           bit1 true, double the input width and half input height, bit0 true, change line buffer 2 lines instead of 4 lines
//Bit 16     0: progressive output, 1: interlace output
//Bit 15     vertical scaler output line0 in advance or not for bottom field
//Bit 14:13  vertical scaler initial repeat line0 number for bottom field
//Bit 11:8   vertical scaler initial receiving  number for bottom field
//Bit 7      vertical scaler output line0 in advance or not for top field
//Bit 6:5    vertical scaler initial repeat line0 number for top field
//Bit 3:0    vertical scaler initial receiving  number for top field
#define VPP_VSC_PHASE_CTRL                         ((0x1d0d  << 2) + 0xff900000)
//Bit 31:16  vertical scaler field initial phase for bottom field
//Bit 15:0  vertical scaler field initial phase for top field
#define VPP_VSC_INI_PHASE                          ((0x1d0e  << 2) + 0xff900000)
//Bit 28:16 region1 startp
//Bit 12:0 region2 startp
#define VPP_HSC_REGION12_STARTP                    ((0x1d10  << 2) + 0xff900000)
//Bit 28:16 region3 startp
//Bit 12:0 region4 startp
#define VPP_HSC_REGION34_STARTP                    ((0x1d11  << 2) + 0xff900000)
#define VPP_HSC_REGION4_ENDP                       ((0x1d12  << 2) + 0xff900000)
//horizontal start phase step, (source/dest)*(2^24)
//Bit 27:24 integer part
//Bit 23:0	fraction part
#define VPP_HSC_START_PHASE_STEP                   ((0x1d13  << 2) + 0xff900000)
//horizontal scaler region0 phase slope, Bit24 signed bit
#define VPP_HSC_REGION0_PHASE_SLOPE                ((0x1d14  << 2) + 0xff900000)
//horizontal scaler region1 phase slope, Bit24 signed bit
#define VPP_HSC_REGION1_PHASE_SLOPE                ((0x1d15  << 2) + 0xff900000)
//horizontal scaler region3 phase slope, Bit24 signed bit
#define VPP_HSC_REGION3_PHASE_SLOPE                ((0x1d16  << 2) + 0xff900000)
//horizontal scaler region4 phase slope, Bit24 signed bit
#define VPP_HSC_REGION4_PHASE_SLOPE                ((0x1d17  << 2) + 0xff900000)
//Bit 22:21   horizontal scaler initial repeat pixel0 number0
//Bit 19:16   horizontal scaler initial receiving number0
//Bit 15:0    horizontal scaler top field initial phase0
#define VPP_HSC_PHASE_CTRL                         ((0x1d18  << 2) + 0xff900000)
// Bit 22 if true, divide VSC line length 2 as the HSC input length, othwise VSC length length is the same as the VSC line length,
//                 just for special usage, more flexibility
// Bit 21 if true, prevsc uses lin buffer, otherwise prevsc does not use line buffer, it should be same as prevsc_en
// Bit 20 prehsc_en
// Bit 19 prevsc_en
// Bit 18 vsc_en
// Bit 17 hsc_en
// Bit 16 scale_top_en
// Bit 15 video1 scale out enable
// Bit 12 if true, region0,region4 are nonlinear regions, otherwise they are not scaling regions, for horizontal scaler
// Bit 10:8 horizontal scaler bank length
// Bit 5, vertical scaler phase field mode, if true, disable the opposite parity line output, more bandwith needed if output 1080i
// Bit 4 if true, region0,region4 are nonlinear regions, otherwise they are not scaling regions, for vertical scaler
// Bit 2:0 vertical scaler bank length
#define VPP_SC_MISC                                ((0x1d19  << 2) + 0xff900000)
// preblend video1 horizontal start and end
//Bit 28:16 start
//Bit 12:0 end
#define VPP_PREBLEND_VD1_H_START_END               ((0x1d1a  << 2) + 0xff900000)
// preblend video1 vertical start and end
//Bit 28:16 start
//Bit 12:0 end
#define VPP_PREBLEND_VD1_V_START_END               ((0x1d1b  << 2) + 0xff900000)
// postblend video1 horizontal start and end
//Bit 28:16 start
//Bit 12:0 end
#define VPP_POSTBLEND_VD1_H_START_END              ((0x1d1c  << 2) + 0xff900000)
// postblend video1 vertical start and end
//Bit 28:16 start
//Bit 12:0 end
#define VPP_POSTBLEND_VD1_V_START_END              ((0x1d1d  << 2) + 0xff900000)
// preblend/postblend video2 horizontal start and end
//Bit 28:16 start
//Bit 12:0 end
#define VPP_BLEND_VD2_H_START_END                  ((0x1d1e  << 2) + 0xff900000)
// preblend/postblend video2 vertical start and end
//Bit 28:16 start
//Bit 12:0 end
#define VPP_BLEND_VD2_V_START_END                  ((0x1d1f  << 2) + 0xff900000)
// preblend horizontal size
#define VPP_PREBLEND_H_SIZE                        ((0x1d20  << 2) + 0xff900000)
// postblend horizontal size
#define VPP_POSTBLEND_H_SIZE                       ((0x1d21  << 2) + 0xff900000)
//VPP hold lines
//Bit 29:24
//Bit 21:16
//Bit 15:8     preblend hold lines
//Bit 7:0      postblend hold lines
#define VPP_HOLD_LINES                             ((0x1d22  << 2) + 0xff900000)
//Bit 26   if true, automatic change post blend output to one color if field ==1
//Bit 25   if true, change screen to one color value for preblender
//Bit 24   if true, change screen to one color value for postblender
// Bit 23:16 one color Y
// Bit 15:8 one color Cb
// Bit  7:0 one color  Cr
#define VPP_BLEND_ONECOLOR_CTRL                    ((0x1d23  << 2) + 0xff900000)
//Read Only, VPP preblend current_x, current_y
//Bit 28:16 current_x
//Bit 12:0 current_y
#define VPP_PREBLEND_CURRENT_XY                    ((0x1d24  << 2) + 0xff900000)
//Read Only, VPP postblend current_x, current_y
//Bit 28:16 current_x
//Bit 12:0 current_y
#define VPP_POSTBLEND_CURRENT_XY                   ((0x1d25  << 2) + 0xff900000)
// Bit 31  vd1_bgosd_exchange_en for preblend
// Bit 30  vd1_bgosd_exchange_en for postblend
// Bit 28   color management enable
// Bit 27,  if true, vd2 use viu2 output as the input, otherwise use normal vd2 from memory
// Bit 26:18, vd2 alpha
// Bit 17, osd2 enable for preblend
// Bit 16, osd1 enable for preblend
// Bit 15, vd2 enable for preblend
// Bit 14, vd1 enable for preblend
// Bit 13, osd2 enable for postblend
// Bit 12, osd1 enable for postblend
// Bit 11, vd2 enable for postblend
// Bit 10, vd1 enable for postblend
// Bit 9,  if true, osd1 is alpha premultipiled
// Bit 8,  if true, osd2 is alpha premultipiled
// Bit 7,  postblend module enable
// Bit 6,  preblend module enable
// Bit 5,  if true, osd2 foreground compared with osd1 in preblend
// Bit 4,  if true, osd2 foreground compared with osd1 in postblend
// Bit 3,
// Bit 2,  if true, disable resetting async fifo every vsync, otherwise every vsync
//			 the aync fifo will be reseted.
// Bit 1,
// Bit 0	if true, the output result of VPP is saturated
#define VPP_MISC                                   ((0x1d26  << 2) + 0xff900000)
//Bit 31:20 ofifo line length minus 1
//Bit 19  if true invert input vs
//Bit 18  if true invert input hs
//Bit 17  force top/bottom field, enable
//Bit 16  force top/bottom field, 0: top, 1: bottom
//Bit 15  force one go_field, one pluse, write only
//Bit 14  force one go_line, one pluse, write only
//Bit 12:0 ofifo size (actually only bit 10:1 is valid), always even number
#define VPP_OFIFO_SIZE                             ((0x1d27  << 2) + 0xff900000)
//Read only
//Bit 28:18 current scale out fifo counter
//Bit 17:13 current afifo counter
//Bit 12:0 current ofifo counter
#define VPP_FIFO_STATUS                            ((0x1d28  << 2) + 0xff900000)
// Bit 5 SMOKE3 postblend enable only when postblend vd2 is not enable
// Bit 4 SMOKE3 preblend enable only when preblend vd2 is not enable
// Bit 3 SMOKE2 postblend enable only when postblend osd2 is not enable
// Bit 2 SMOKE2 preblend enable only when preblend osd2 is not enable
// Bit 1 SMOKE1 postblend enable only when postblend osd1 is not enable
// Bit 0 SMOKE1 preblend enable only when preblend osd1 is not enable
#define VPP_SMOKE_CTRL                             ((0x1d29  << 2) + 0xff900000)
//smoke can be used only when that blending is disable and then be used as smoke function
//smoke1 for OSD1 chanel
//smoke2 for OSD2 chanel
//smoke3 for VD2 chanel
//31:24 Y
//23:16 Cb
//15:8 Cr
//7:0 Alpha
#define VPP_SMOKE1_VAL                             ((0x1d2a  << 2) + 0xff900000)
#define VPP_SMOKE2_VAL                             ((0x1d2b  << 2) + 0xff900000)
#define VPP_SMOKE3_VAL                             ((0x1d2c  << 2) + 0xff900000)
//Bit 28:16 start
//Bit 12:0 end
#define VPP_SMOKE1_H_START_END                     ((0x1d2d  << 2) + 0xff900000)
//Bit 28:16 start
//Bit 12:0 end
#define VPP_SMOKE1_V_START_END                     ((0x1d2e  << 2) + 0xff900000)
//Bit 28:16 start
//Bit 12:0 end
#define VPP_SMOKE2_H_START_END                     ((0x1d2f  << 2) + 0xff900000)
//Bit 28:16 start
//Bit 12:0 end
#define VPP_SMOKE2_V_START_END                     ((0x1d30  << 2) + 0xff900000)
//Bit 28:16 start
//Bit 12:0 end
#define VPP_SMOKE3_H_START_END                     ((0x1d31  << 2) + 0xff900000)
//Bit 28:16 start
//Bit 12:0 end
#define VPP_SMOKE3_V_START_END                     ((0x1d32  << 2) + 0xff900000)
//Bit 27:16 scale out fifo line length minus 1
//Bit 12:0 scale out fifo size (actually only bit 11:1 is valid, 11:1, max 1024), always even number
#define VPP_SCO_FIFO_CTRL                          ((0x1d33  << 2) + 0xff900000)
//for 3D quincunx sub-sampling and horizontal pixel by pixel 3D interleaving
//Bit 27:24, prehsc_mode, bit 3:2, prehsc odd line interp mode, bit 1:0, prehsc even line interp mode,
//           each 2bit, 00: pix0+pix1/2, average, 01: pix1, 10: pix0
//Bit 23 horizontal scaler double pixel mode
//Bit 22:21   horizontal scaler initial repeat pixel0 number1
//Bit 19:16   horizontal scaler initial receiving number1
//Bit 15:0    horizontal scaler top field initial phase1
#define VPP_HSC_PHASE_CTRL1                        ((0x1d34  << 2) + 0xff900000)
//for 3D quincunx sub-sampling
//31:24  prehsc pattern, each patten 1 bit, from lsb -> msb
//22:20  prehsc pattern start
//18:16 prehsc pattern end
//15:8 hsc pattern, each patten 1 bit, from lsb -> msb
//6:4  hsc pattern start
//2:0  hsc pattern end
#define VPP_HSC_INI_PAT_CTRL                       ((0x1d35  << 2) + 0xff900000)
//Bit 3			minus black level enable for vadj2
//Bit 2			Video adjustment enable for vadj2
//Bit 1			minus black level enable for vadj1
//Bit 0			Video adjustment enable for vadj1
#define VPP_VADJ_CTRL                              ((0x1d40  << 2) + 0xff900000)
//Bit 16:8  brightness, signed value
//Bit 7:0	contrast, unsigned value, contrast from  0 <= contrast <2
#define VPP_VADJ1_Y                                ((0x1d41  << 2) + 0xff900000)
//cb' = cb*ma + cr*mb
//cr' = cb*mc + cr*md
//all are bit 9:0, signed value, -2 < ma/mb/mc/md < 2
#define VPP_VADJ1_MA_MB                            ((0x1d42  << 2) + 0xff900000)
#define VPP_VADJ1_MC_MD                            ((0x1d43  << 2) + 0xff900000)
//Bit 16:8  brightness, signed value
//Bit 7:0	contrast, unsigned value, contrast from  0 <= contrast <2
#define VPP_VADJ2_Y                                ((0x1d44  << 2) + 0xff900000)
//cb' = cb*ma + cr*mb
//cr' = cb*mc + cr*md
//all are bit 9:0, signed value, -2 < ma/mb/mc/md < 2
#define VPP_VADJ2_MA_MB                            ((0x1d45  << 2) + 0xff900000)
#define VPP_VADJ2_MC_MD                            ((0x1d46  << 2) + 0xff900000)
//Bit 2 horizontal chroma sharp/blur selection, 0:sharp, 1: blur
//Bit 1 horizontal luma sharp/blur selection, 0:sharp, 1: blur
//Bit 0 horizontal sharpness enable
#define VPP_HSHARP_CTRL                            ((0x1d50  << 2) + 0xff900000)
//{1'b0,threhsold} < diff
//Bit 26:16  luma threshold0
//Bit 10:0   luma threshold1
#define VPP_HSHARP_LUMA_THRESH01                   ((0x1d51  << 2) + 0xff900000)
//
//Bit 26:16  luma threshold2
//Bit 10:0   luma threshold3
#define VPP_HSHARP_LUMA_THRESH23                   ((0x1d52  << 2) + 0xff900000)
//Bit 26:16  chroma threshold0
//Bit 10:0   chroma threshold1
#define VPP_HSHARP_CHROMA_THRESH01                 ((0x1d53  << 2) + 0xff900000)
//Bit 26:16  chroma threshold2
//Bit 10:0   chroma threshold3
#define VPP_HSHARP_CHROMA_THRESH23                 ((0x1d54  << 2) + 0xff900000)
//Bit 23:16 luma gain2
//Bit 15:8  luma gain1
//Bit 7:0   luma gain0
#define VPP_HSHARP_LUMA_GAIN                       ((0x1d55  << 2) + 0xff900000)
//
//Bit 23:16 chroma gain2
//Bit 15:8  chroma gain1
//Bit 7:0   chroma gain0
#define VPP_HSHARP_CHROMA_GAIN                     ((0x1d56  << 2) + 0xff900000)
//Read only
//Bit 31, if it is true, it means this probe is valid in the last field/frame
//Bit 29:20 component 0
//Bit 19:10 component 1
//Bit 9:0 component 2
#define VPP_MATRIX_PROBE_COLOR                     ((0x1d5c  << 2) + 0xff900000)
#define VPP_MATRIX_PROBE_COLOR1                    ((0x1dd7  << 2) + 0xff900000)
//Bit 23:16 component 0
//Bit 15:8  component 1
//Bit 7:0 component 2
#define VPP_MATRIX_HL_COLOR                        ((0x1d5d  << 2) + 0xff900000)
//28:16 probe x, postion
//12:0  probe y, position
#define VPP_MATRIX_PROBE_POS                       ((0x1d5e  << 2) + 0xff900000)
//Bit 16,  highlight_en
//Bit 15   probe_post, if true, probe pixel data after matrix, otherwise probe pixel data before matrix
//Bit 14:12 probe_sel, 000: select post matrix, 001: select vd1 matrix, 010: select vd2 matrix
//Bit 9:8  matrix coef idx selection, 00: select post matrix, 01: select vd1 matrix, 10: select vd2 matrix
//Bit 5    vd1 conversion matrix enable
//Bit 4    vd2 conversion matrix enable
//Bit 2    output y/cb/cr saturation enable, only for post matrix (y saturate to 16-235, cb/cr saturate to 16-240)
//Bit 1    input y/cb/cr saturation enable, only for post matrix (y saturate to 16-235, cb/cr saturate to 16-240)
//Bit 0    post conversion matrix enable
#define VPP_MATRIX_CTRL                            ((0x1d5f  << 2) + 0xff900000)
//Bit 28:16 coef00
//Bit 12:0  coef01
#define VPP_MATRIX_COEF00_01                       ((0x1d60  << 2) + 0xff900000)
//Bit 28:16 coef02
//Bit 12:0  coef10
#define VPP_MATRIX_COEF02_10                       ((0x1d61  << 2) + 0xff900000)
//Bit 28:16 coef11
//Bit 12:0  coef12
#define VPP_MATRIX_COEF11_12                       ((0x1d62  << 2) + 0xff900000)
//Bit 28:16 coef20
//Bit 12:0  coef21
#define VPP_MATRIX_COEF20_21                       ((0x1d63  << 2) + 0xff900000)
#define VPP_MATRIX_COEF22                          ((0x1d64  << 2) + 0xff900000)
//Bit 26:16 offset0
//Bit 10:0  offset1
#define VPP_MATRIX_OFFSET0_1                       ((0x1d65  << 2) + 0xff900000)
//Bit 10:0  offset2
#define VPP_MATRIX_OFFSET2                         ((0x1d66  << 2) + 0xff900000)
//Bit 26:16 pre_offset0
//Bit 10:0  pre_offset1
#define VPP_MATRIX_PRE_OFFSET0_1                   ((0x1d67  << 2) + 0xff900000)
//Bit 10:0  pre_offset2
#define VPP_MATRIX_PRE_OFFSET2                     ((0x1d68  << 2) + 0xff900000)
// dummy data used in the VPP postblend
// Bit 23:16    Y
// Bit 15:8     CB
// Bit 7:0      CR
#define VPP_DUMMY_DATA1                            ((0x1d69  << 2) + 0xff900000)
//Bit 31 gainoff module enable
//Bit 26:16 gain0, 1.10 unsigned data
//Bit 10:0  gain1, 1.10 unsigned dat
#define VPP_GAINOFF_CTRL0                          ((0x1d6a  << 2) + 0xff900000)
//Bit 26:16 gain2, 1.10 unsigned data
//Bit 10:0, offset0, signed data
#define VPP_GAINOFF_CTRL1                          ((0x1d6b  << 2) + 0xff900000)
//Bit 26:16, offset1, signed data
//Bit 10:0, offset2, signed data
#define VPP_GAINOFF_CTRL2                          ((0x1d6c  << 2) + 0xff900000)
//Bit 26:16, pre_offset0, signed data
//Bit 10:0, pre_offset1, signed data
#define VPP_GAINOFF_CTRL3                          ((0x1d6d  << 2) + 0xff900000)
//Bit 10:0, pre_offset2, signed data
#define VPP_GAINOFF_CTRL4                          ((0x1d6e  << 2) + 0xff900000)
//only two registers used in the color management, which are defined in the chroma_reg.h
//`define VPP_CHROMA_ADDR_PORT    8'h70
//`define VPP_CHROMA_DATA_PORT    8'h71
//
// Reading file:  chroma_reg.h
//
//**********************************************************************************
//* Copyright (c) 2008, AMLOGIC Inc.
//* All rights reserved
//**********************************************************************************
//* File :  chroma_reg.v
//* Author : Terrence Wang
//* Date : Dec 2008
//* Description :
//*
//**********************************************************************************
//* Modification History:
//* Date    Modified By         Reason
//**********************************************************************************
// synopsys translate_off
// synopsys translate_on
#define VPP_CHROMA_ADDR_PORT                       ((0x1d70  << 2) + 0xff900000)
#define VPP_CHROMA_DATA_PORT                       ((0x1d71  << 2) + 0xff900000)
//`define CHROMA_ADDR_PORT        8'h67
//`define CHROMA_DATA_PORT        8'h68

//  CHROMA_GAIN_REG_XX(00-07)
//  hue gain, sat gain function control
//  Bit 31      reg_sat_en                  enable sat adjustment in current region
//  Bit 27      reg_sat_increase            sat adjustment increase or decrease
//                                          1'b1: increase  1'b0: decrease
//  Bit 26:25   reg_sat_central_en          sat adjustment with central biggest or one side biggest
//                                          2'b01 central biggest   2'b00 one side biggest
//  Bit 24      reg_sat_shape               when sat adjustment one side biggest, define left or right
//                                          1'b1: left side biggest 1'b0 right side biggest
//  Bit 23:16   reg_sat_gain                define the sat gain when sat adjustment
//                                          0x00-0xff
//  Bit 15      reg_hue_en                  enable hue adjustment in current region
//  Bit 11      reg_hue_clockwise           hue adjustment clockwise or anti-clockwise
//                                          1'b1: clockwise 1'b0: anti-clockwise
//  Bit 10:9    reg_hue_central_en          when hue adjustment, parabola curve or non-symmetry curve
//                                          1'b1: parabola curve    1'b0: non-symmetry curve
//  Bit 8       reg_hue_shape               when non-symmetry curve, define which side change more
//                                          1'b1: right side change more    1'b0: left side change more
//  Bit 7:0     reg_hue_gain                define the hue gain when hue adjustment
//                                          0x00-0x80, note: should be no bigger than 0x80

    #define CHROMA_GAIN_REG00       0x00


//  HUE_HUE_RANGE_REG_XX(00-07)
//  hue range select
//  Bit 31:24   no use now
//  Bit 23:16   reg_hue_shift_range         define the angle of target region
//                                          0x00-0xff,(0x100 means 120 degree though it can not be set)
//                                          must be greater or equal than 8'd8
//  Bit 15      reg_symmetry_en             this is used for create one symmetry region
//                                          the symmetry region hue_shift_start = reg_hue_hue_shift_start + reg_hue_shift_range<<5
//                                          the symmetry region hue_shift_range = reg_hue_shift_range
//                                          in symmetry region, all the sat and hue setting will be same with original region,
//                                          except reg_hue_shape, reg_sat_shape, reg_hue_clockwise will be reversed
//  Bit 14:0    reg_hue_hue_shift_start     define the start angle of target region
//                                          0x6000 means 360 degree
//                                          only region 0 and 1 can exceed 360 degrees.

    #define HUE_HUE_RANGE_REG00     0x01


//  HUE_RANGE_INV_REG_XX
//  Calculation should be follow
//  HUE_RANGE_INV_REG0X[15:0] = ((1<<20)/HUE_HUE_RANGE_REG0X[23:16]+1)>>1
//  HUE_RANGE_INV_REG_XX is to used to save divider

    #define HUE_RANGE_INV_REG00     0x02


//  for belowing each low, high, low_slope, high_slope group:
//            a_____________b
//            /             \               a = low  + 2^low_slope
//           /               \              b = high - 2^high_slope
//          /                 \             low_slope <= 7; high_slope <= 7
//         /                   \            b >= a
//  ______/_____________________\________
//       low                    high
//
//
//  HUE_LUM_RANGE_REG_XX(00-07)
//  luma range selection for hue adjustment
//  Bit 31:24   reg_sat_lum_low             define the low level of luma value for sat adjustment
//                                          0x00-0xff
//  Bit 23:20   reg_hue_lum_high_slope      define the slope area below high level of luma value for hue adjustment
//                                          0x00-0x07
//  Bit 19:16   reg_hue_lum_low_slope       define the slope area above low  level of luma value for hue adjustment
//                                          0x00-0x07
//  Bit 15:8    reg_hue_lum_high            define the high level of luma value for hue adjustment
//                                          0x00-0xff
//  Bit 7:0     reg_hue_lum_low             define the low  level of luma value for hue adjustment
//                                          0x00-0xff

    #define HUE_LUM_RANGE_REG00     0x03

//  HUE_SAT_RANGE_REG_XX(00-07)
//  sat range selection for hue adjustment
//  Bit 31:24   reg_sat_lum_high            define the high level of luma value for sat adjustment
//                                          0x00-0xff
//  Bit 23:20   reg_hue_sat_high_slope      define the slope area below high level of sat value for hue adjustment
//                                          0x00-0x07
//  Bit 19:16   reg_hue_sat_low_slope       define the slope area above low  level of sat value for hue adjustment
//                                          0x00-0x07
//  Bit 15:8    reg_hue_sat_high            define the high level of sat value for hue adjustment
//                                          0x00-0xff
//  Bit 7:0     reg_hue_sat_low             define the low  level of sat value for hue adjustment
//                                          0x00-0xff

    #define HUE_SAT_RANGE_REG00     0x04

//  SAT_SAT_RANGE_REG_XX(00-07)
//  sat range selection for hue adjustment
//  Bit 31:28   reg_sat_lum_high_slope      define the slope area below high level of luma value for sat adjustment
//                                          0x00-0x07
//  Bit 27:24   reg_sat_lum_low_slope       define the slope area above low  level of luma value for sat adjustment
//                                          0x00-0x07
//  Bit 23:20   reg_sat_sat_high_slope      define the slope area below high level of sat value for sat adjustment
//                                          0x00-0x07
//  Bit 19:16   reg_sat_sat_low_slope       define the slope area above low  level of sat value for sat adjustment
//                                          0x00-0x07
//  Bit 15:8    reg_sat_sat_high            define the high level of sat value for sat adjustment
//                                          0x00-0xff
//  Bit 7:0     reg_sat_sat_low             define the low  level of sat value for sat adjustment
//                                          0x00-0xff

    #define SAT_SAT_RANGE_REG00     0x05


    #define CHROMA_GAIN_REG01       0x06
    #define HUE_HUE_RANGE_REG01     0x07
    #define HUE_RANGE_INV_REG01     0x08
    #define HUE_LUM_RANGE_REG01     0x09
    #define HUE_SAT_RANGE_REG01     0x0a
    #define SAT_SAT_RANGE_REG01     0x0b

    #define CHROMA_GAIN_REG02       0x0c
    #define HUE_HUE_RANGE_REG02     0x0d
    #define HUE_RANGE_INV_REG02     0x0e
    #define HUE_LUM_RANGE_REG02     0x0f
    #define HUE_SAT_RANGE_REG02     0x10
    #define SAT_SAT_RANGE_REG02     0x11


    #define CHROMA_GAIN_REG03       0x12
    #define HUE_HUE_RANGE_REG03     0x13
    #define HUE_RANGE_INV_REG03     0x14
    #define HUE_LUM_RANGE_REG03     0x15
    #define HUE_SAT_RANGE_REG03     0x16
    #define SAT_SAT_RANGE_REG03     0x17

    #define CHROMA_GAIN_REG04       0x18
    #define HUE_HUE_RANGE_REG04     0x19
    #define HUE_RANGE_INV_REG04     0x1a
    #define HUE_LUM_RANGE_REG04     0x1b
    #define HUE_SAT_RANGE_REG04     0x1c
    #define SAT_SAT_RANGE_REG04     0x1d

    #define CHROMA_GAIN_REG05       0x1e
    #define HUE_HUE_RANGE_REG05     0x1f
    #define HUE_RANGE_INV_REG05     0x20
    #define HUE_LUM_RANGE_REG05     0x21
    #define HUE_SAT_RANGE_REG05     0x22
    #define SAT_SAT_RANGE_REG05     0x23

    #define CHROMA_GAIN_REG06       0x24
    #define HUE_HUE_RANGE_REG06     0x25
    #define HUE_RANGE_INV_REG06     0x26
    #define HUE_LUM_RANGE_REG06     0x27
    #define HUE_SAT_RANGE_REG06     0x28
    #define SAT_SAT_RANGE_REG06     0x29

    #define CHROMA_GAIN_REG07       0x2a
    #define HUE_HUE_RANGE_REG07     0x2b
    #define HUE_RANGE_INV_REG07     0x2c
    #define HUE_LUM_RANGE_REG07     0x2d
    #define HUE_SAT_RANGE_REG07     0x2e
    #define SAT_SAT_RANGE_REG07     0x2f

//  REG_CHROMA_CONTROL
//  Bit 31      reg_chroma_en               enable color manage function
//                                          1'b1: enable    1'b0: bypass
//  Bit 6       sat_sel                     uv_max or u^2+v^2 selected as sat for reference
//                                          1'b1: uv_max(default)   1'b0: u^2+v^2
//  Bit 5       uv_adj_en                   final uv_adjust enable
//                                          1'b1: enable    1'b0: bypass
//  Bit 2       hue_en                      rgb to hue enable
//                                          1'b1: enable(default)   1'b0: bypass
//  Bit 1:0     csc_sel                     define input YUV with different color type
//                                          2'b00: 601(16-235)  2'b01: 709(16-235)
//                                          2'b10: 601(0-255)   2'b11: 709(0-255)
    #define REG_CHROMA_CONTROL      0x30   // default 32h'80000024
    #define REG_DEMO_CENTER_BAR     0x31   // default 32h'0
    #define REG_DEMO_HLIGHT_MODE    0x32   // default 32h'0
    #define REG_DEMO_OWR_DATA       0x33   // default 32h'0


////===========================================////
//// CM2 ADDR
////===========================================////

    #define SAT_BYYB_NODE_REG0          0x200   // default 32'h0
//Bit 31:24, sat_byyb_node3    the 4th node
//Bit 23:16, sat_byyb_node2    the 3th node
//Bit 15: 8, sat_byyb_node1    signed, the 2th node about saturation
//Bit  7: 0, sat_byyb_node0    signed, the 1th node about saturation
//gain offset along y coordinate,the gain normalized to 128 as "1"

	#define SAT_BYYB_NODE_REG1          0x201   // default 32'h0
//Bit 31:24, sat_byyb_node7     the 8th node
//Bit 23:16, sat_byyb_node6     the 7th node
//Bit 15: 8, sat_byyb_node5     signed, the 6th node about saturation
//Bit  7: 0, sat_byyb_node4     signed, the 5th node about saturation
//gain offset along y coordinate,the gain normalized to 128 as "1"

    #define SAT_BYYB_NODE_REG2          0x202   // default 32'h0
//Bit 31: 8, reserved
//Bit  7: 0, sat_byyb_node4     signed, the 5th node about saturation


    #define SAT_SRC_NODE_REG            0x203   // default 32'h0
//Bit 31:28, reserved
//Bit 27:16, sat_src_node1
//Bit 15:12, reserved
//Bit 11: 0, sat_src_node0     usigned, threshold of input saturation for  first and second piece

    #define CM_ENH_SFT_MODE_REG         0x204   // default 32'h0
//Bit 31: 9, reserved
//Bit  8: 6, hue_lsft_mode        hue offset adjustments scale
//Bit  5: 4, luma_lsft_mode       luma offset adjustments scale for reg_cm2_adj_luma_via_hue
//Bit  3: 2, sat_byy_rsft_mode    saturation gain adjustments scale for reg_cm2_adj_sat_via_y
//Bit  1: 0, sat_byhs_rsft_mode   saturation gain adjustments scale for reg_cm2_adj_sat_via_hs[:][:] 0:no scale up/down 1:dnscale by 2(-128,127)/2

    #define FRM_SIZE_REG                0x205   // default 32'h0
//Bit 31:29, reserved
//Bit 28:16, reg_frm_height       the frame height size
//Bit 15:13, reserved
//Bit 12: 0, reg_frm_width        the frame width size

    #define FITLER_CFG_REG              0x206   // default 32'h0
//Bit 31: 5, reserved
//Bit  4: 4, inteleav_mod         horizontal interleave filter(zero-padding) for 3D considerations 0:using non-zero padding lpf 1:using zero-padding lpf
//Bit  3: 2, lpf_slt_uv           apply cm on lp portion or original video pixels options
//Bit  1: 0, lpf_slt_y            apply cm on lp portion or original video pixels options

    #define CM_GLOBAL_GAIN_REG          0x207   // default 32'h0
//Bit 31:28, reserved
//Bit 27:16, cm2_global_sat     global saturation gain for general color adjustments(0~4095 <=> 0~8),512 normalized to "1"
//Bit 15:12, reserved
//Bit 11: 0, cm2_global_hue     global hue offsets for general color adjustments(0~4095 <=> 0~360 degree)

    #define CM_ENH_CTL_REG              0x208   // default 32'h0
//Bit  31:7, reserved
//Bit     6, hue_adj_en        cm2 hue adjustments
//Bit     5, sat_adj_en        cm2 saturation adjustments
//Bit     4, luma_adj_en       enable siganl for cm2 luma adjustments
//Bit     3, reserved
//Bit     2, cm2_filt_en       apply cm on lp portion enable
//Bit     1, cm2_en            cm2 enable siganl
//Bit     0, cm1_en

    #define ROI_X_SCOPE_REG             0x209   // default 32'h0
//Bit 31:29, reserved
//Bit 28:16, roi_x_end      ending col index of the region of interest
//Bit 15:13, reserved
//Bit 12: 0, roi_x_beg      start col index of the region of interest

   #define ROI_Y_SCOPE_REG             0x20a   // default 32'h0
//Bit 31:29, reserved
//Bit 28:16, roi_y_end      ending row index of the region of interest
//Bit 15:13, reserved
//Bit 12: 0, roi_y_beg      start row index of the region of interest

    #define POI_XY_DIR_REG              0x20b   // default 32'h0
//Bit 31:29, reserved
//Bit 28:16, poi_y_dir      ending row index of the region of interest
//Bit 15:13, reserved
//Bit 12: 0, poi_x_dir      start row index of the region of interest

    #define COI_Y_SCOPE_REG             0x20c   // default 32'h0
//Bit 31:16, reserved
//Bit 15: 8, coi_y_end
//Bit  7: 0, coi_y_beg

    #define COI_H_SCOPE_REG             0x20d   // default 32'h0
//Bit 31:28, reserved
//Bit 27:16, coi_h_end
//Bit 15:12, reserved
//Bit 11: 0, coi_h_beg        lower bound of hue value for color of interest ,12 bits precision

    #define COI_S_SCOPE_REG             0x20e   // default 32'h0
//Bit 31:28, reserved
//Bit 27:16, coi_s_end
//Bit 15:12, reserved
//Bit 11: 0, coi_s_beg        lower bound of sat value for color of interest ,12 bits precision
    #define IFO_MODE_REG                0x20f   // default 32'h0
//Bit 31:8, reserved
//Bit  7:6, ifo_mode3
//Bit  5:4, ifo_mode2
//Bit  3:2, ifo_mode1
//Bit  1:0, ifo_mode0
    #define POI_RPL_MODE_REG            0x210   // default 32'h0
//Bit 31:4, reserved
//Bit  3:0, poi_rpl_mode          enhance mode control of pixels inside and outside region of interest bit[3:2]control roi
    #define DEMO_OWR_YHS_REG            0x211   // default 32'h0
//Bit 31: 0, demo_owr_yhs

    #define DEMO_POI_Y_REG              0x212   // default 32'h0
//Bit 31: 8, reserved
//Bit  7: 0, luma_data_poi_r       only get locked higher 8bits
    #define DEMO_POI_H_REG              0x213   // default 32'h0
//Bit 31: 12, reserved
//Bit 11: 0, hue_data_poi_r        only get locked higher 12bits
    #define DEMO_POI_S_REG              0x214   // default 32'h0
//Bit 31: 12, reserved
//Bit 11: 0, sat_data_poi_r         only get locked higher 12bits
    //#define LUMA_BYH_LIMT_REG           0x215   // default 32'h0
    #define LUMA_ADJ_LIMT_REG           0x215   // default 32'h0
//Bit 31:24, reserved
//Bit 23:16, luma_lmt_satslp         slope to do the luma adjustment degrade
//Bit 15:12, reserved
//Bit 11:0, luma_lmt_satth           threshold to saturation
    #define SAT_ADJ_LIMT_REG            0x216   // default 32'h0
//Bit 31:24, reserved
//Bit 23:16, sat_lmt_satslp        slope to do the adjustment degrade
//Bit 15:12, reserved
//Bit 11:0, sat_lmt_satth          threshold to saturation
    #define HUE_ADJ_LIMT_REG            0x217   // default 32'h0
//Bit 31: 24, reserved
//Bit 23: 16, hue_lmt_satslp        slope to do the adjustment degrade
//Bit 15: 12, reserved
//Bit 11: 0,  hue_lmt_satth          threshold to saturation
    #define UVHS_OFST_REG               0x218   // default 32'h0
//Bit 31: 24, hs2uv_v_ofst
//Bit 23: 16, hs2uv_u_ofst
//Bit 15: 8,  uv2hs_v_ofst
//Bit  7: 0,  uv2hs_u_ofst
    #define HUE_CFG_PARA_REG            0x219   // default 32'h0
//Bit 31: 17, reserved
//Bit     16, hue_protect_en
//Bit 15: 13, cm2_hue_byhs_mode
//Bit     12, cm2_hue_div_mode
//Bit 11: 0, cm2_before_hue_ofst
    #define DEMO_SPLT_CFG_REG           0x21a   // default 32'h0
//Bit 31: 22, reserved
//Bit 21: 20, demo_split_mode
//Bit 19: 16, demo_split_width        slope to do the adjustment degrade
//Bit 15: 13, reserved
//Bit 12: 0,  demo_split_post           threshold to saturation
    #define DEMO_SPLT_YHS_REG           0x21b   // default 32'h0
//Bit 31: 0,  demo_splt_yhs             threshold to saturation

    #define XVYCC_YSCP_REG              0x21c   // default 32'h0
//Bit 31: 28, reserved
//Bit 27: 16, xvycc_y_max
//Bit 15: 12, reserved
//Bit 11: 0, xvycc_y_min
    #define XVYCC_USCP_REG              0x21d   // default 32'h0
//Bit 31: 28, reserved
//Bit 27: 16, xvycc_u_max
//Bit 15: 12, reserved
//Bit 11: 0, xvycc_u_min
    #define XVYCC_VSCP_REG              0x21e   // default 32'h0
//Bit 31: 28, reserved
//Bit 27: 16, xvycc_v_max
//Bit 15: 12, reserved
//Bit 11: 0, xvycc_v_min

////========= NODE 0 COEFFICIENT ==============////

    #define REG_CM2_ENH_COEFF0_H00      0x100   // default 32'H0
//Bit 31: 24, reg_cm2_adj_sat_via_hs_2
//Bit 23: 16, reg_cm2_adj_sat_via_hs_1
//Bit 15: 8,  reg_cm2_adj_sat_via_hs_0
//Bit  7: 0, reg_cm2_adj_luma_via_h
                                                  // [ 7: 0] : luma_byh_hx   / [15: 8] : sat_byhs_s0hx
                                                  // [23:16] : sat_byhs_s0hx / [31:24] : sat_byhs_s2hx
    #define REG_CM2_ENH_COEFF1_H00      0x101   // default 32'H0
                                                  // [ 7: 0] : hue_byh_hx   / [15: 8] : hue_byy_y0hx
                                                  // [23:16] : hue_byy_y1hx / [31:24] : hue_byy_y2hx
    #define REG_CM2_ENH_COEFF2_H00      0x102   // default 32'H0
                                                  // [ 7: 0] : hue_byy_y3hx / [15: 8] : hue_byy_y4hx
                                                  // [23:16] : hue_bys_s0hx / [31:24] : hue_bys_s1hx
    #define REG_CM2_ENH_COEFF3_H00      0x103   // default 32'H0
                                                  // [ 7: 0] : hue_bys_s2hx / [15: 8] : hue_bys_s3hx
                                                  // [23:16] : hue_bys_s4hx / [31:24] : hue_byya_y0hx
    #define REG_CM2_ENH_COEFF4_H00      0x104   // default 32'H0
                                                  // [ 7: 0] : hue_byya_y1hx / [15: 8] : hue_byya_y2hx
                                                  // [23:16] : hue_byya_y3hx / [31:24] : hue_byya_y4hx

////========= NODE 1 COEFFICIENT ==============////

    #define REG_CM2_ENH_COEFF0_H01      0x108   // default 32'H0
                                                  // [ 7: 0] : luma_byh_hx   / [15: 8] : sat_byhs_s0hx
                                                  // [23:16] : sat_byhs_s0hx / [31:24] : sat_byhs_s2hx
    #define REG_CM2_ENH_COEFF1_H01      0x109   // default 32'H0
                                                  // [ 7: 0] : hue_byh_hx   / [15: 8] : hue_byy_y0hx
                                                  // [23:16] : hue_byy_y1hx / [31:24] : hue_byy_y2hx
    #define REG_CM2_ENH_COEFF2_H01      0x10a   // default 32'H0
                                                  // [ 7: 0] : hue_byy_y3hx / [15: 8] : hue_byy_y4hx
                                                  // [23:16] : hue_bys_s0hx / [31:24] : hue_bys_s1hx
    #define REG_CM2_ENH_COEFF3_H01      0x10b   // default 32'H0
                                                  // [ 7: 0] : hue_bys_s2hx / [15: 8] : hue_bys_s3hx
                                                  // [23:16] : hue_bys_s4hx / [31:24] : hue_byya_y0hx
    #define REG_CM2_ENH_COEFF4_H01      0x10c   // default 32'H0
                                                  // [ 7: 0] : hue_byya_y1hx / [15: 8] : hue_byya_y2hx
                                                  // [23:16] : hue_byya_y3hx / [31:24] : hue_byya_y4hx

////========= NODE 2 COEFFICIENT ==============////

    #define REG_CM2_ENH_COEFF0_H02      0x110   // default 32'H0
                                                  // [ 7: 0] : luma_byh_hx   / [15: 8] : sat_byhs_s0hx
                                                  // [23:16] : sat_byhs_s0hx / [31:24] : sat_byhs_s2hx
    #define REG_CM2_ENH_COEFF1_H02      0x111   // default 32'H0
                                                  // [ 7: 0] : hue_byh_hx   / [15: 8] : hue_byy_y0hx
                                                  // [23:16] : hue_byy_y1hx / [31:24] : hue_byy_y2hx
    #define REG_CM2_ENH_COEFF2_H02      0x112   // default 32'H0
                                                  // [ 7: 0] : hue_byy_y3hx / [15: 8] : hue_byy_y4hx
                                                  // [23:16] : hue_bys_s0hx / [31:24] : hue_bys_s1hx
    #define REG_CM2_ENH_COEFF3_H02      0x113   // default 32'H0
                                                  // [ 7: 0] : hue_bys_s2hx / [15: 8] : hue_bys_s3hx
                                                  // [23:16] : hue_bys_s4hx / [31:24] : hue_byya_y0hx
    #define REG_CM2_ENH_COEFF4_H02      0x114   // default 32'H0
                                                  // [ 7: 0] : hue_byya_y1hx / [15: 8] : hue_byya_y2hx
                                                  // [23:16] : hue_byya_y3hx / [31:24] : hue_byya_y4hx

////========= NODE 3 COEFFICIENT ==============////

    #define REG_CM2_ENH_COEFF0_H03      0x118   // default 32'H0
                                                  // [ 7: 0] : luma_byh_hx   / [15: 8] : sat_byhs_s0hx
                                                  // [23:16] : sat_byhs_s0hx / [31:24] : sat_byhs_s2hx
    #define REG_CM2_ENH_COEFF1_H03      0x119   // default 32'H0
                                                  // [ 7: 0] : hue_byh_hx   / [15: 8] : hue_byy_y0hx
                                                  // [23:16] : hue_byy_y1hx / [31:24] : hue_byy_y2hx
    #define REG_CM2_ENH_COEFF2_H03      0x11a   // default 32'H0
                                                  // [ 7: 0] : hue_byy_y3hx / [15: 8] : hue_byy_y4hx
                                                  // [23:16] : hue_bys_s0hx / [31:24] : hue_bys_s1hx
    #define REG_CM2_ENH_COEFF3_H03      0x11b   // default 32'H0
                                                  // [ 7: 0] : hue_bys_s2hx / [15: 8] : hue_bys_s3hx
                                                  // [23:16] : hue_bys_s4hx / [31:24] : hue_byya_y0hx
    #define REG_CM2_ENH_COEFF4_H03      0x11c   // default 32'H0
                                                  // [ 7: 0] : hue_byya_y1hx / [15: 8] : hue_byya_y2hx
                                                  // [23:16] : hue_byya_y3hx / [31:24] : hue_byya_y4hx

////========= NODE 4 COEFFICIENT ==============////

    #define REG_CM2_ENH_COEFF0_H04      0x120   // default 32'H0
                                                  // [ 7: 0] : luma_byh_hx   / [15: 8] : sat_byhs_s0hx
                                                  // [23:16] : sat_byhs_s0hx / [31:24] : sat_byhs_s2hx
    #define REG_CM2_ENH_COEFF1_H04      0x121   // default 32'H0
                                                  // [ 7: 0] : hue_byh_hx   / [15: 8] : hue_byy_y0hx
                                                  // [23:16] : hue_byy_y1hx / [31:24] : hue_byy_y2hx
    #define REG_CM2_ENH_COEFF2_H04      0x122   // default 32'H0
                                                  // [ 7: 0] : hue_byy_y3hx / [15: 8] : hue_byy_y4hx
                                                  // [23:16] : hue_bys_s0hx / [31:24] : hue_bys_s1hx
    #define REG_CM2_ENH_COEFF3_H04      0x123   // default 32'H0
                                                  // [ 7: 0] : hue_bys_s2hx / [15: 8] : hue_bys_s3hx
                                                  // [23:16] : hue_bys_s4hx / [31:24] : hue_byya_y0hx
    #define REG_CM2_ENH_COEFF4_H04      0x124   // default 32'H0
                                                  // [ 7: 0] : hue_byya_y1hx / [15: 8] : hue_byya_y2hx
                                                  // [23:16] : hue_byya_y3hx / [31:24] : hue_byya_y4hx

////========= NODE 5 COEFFICIENT ==============////

    #define REG_CM2_ENH_COEFF0_H05      0x128   // default 32'H0
                                                  // [ 7: 0] : luma_byh_hx   / [15: 8] : sat_byhs_s0hx
                                                  // [23:16] : sat_byhs_s0hx / [31:24] : sat_byhs_s2hx
    #define REG_CM2_ENH_COEFF1_H05      0x129   // default 32'H0
                                                  // [ 7: 0] : hue_byh_hx   / [15: 8] : hue_byy_y0hx
                                                  // [23:16] : hue_byy_y1hx / [31:24] : hue_byy_y2hx
    #define REG_CM2_ENH_COEFF2_H05      0x12a   // default 32'H0
                                                  // [ 7: 0] : hue_byy_y3hx / [15: 8] : hue_byy_y4hx
                                                  // [23:16] : hue_bys_s0hx / [31:24] : hue_bys_s1hx
    #define REG_CM2_ENH_COEFF3_H05      0x12b   // default 32'H0
                                                  // [ 7: 0] : hue_bys_s2hx / [15: 8] : hue_bys_s3hx
                                                  // [23:16] : hue_bys_s4hx / [31:24] : hue_byya_y0hx
    #define REG_CM2_ENH_COEFF4_H05      0x12c   // default 32'H0
                                                  // [ 7: 0] : hue_byya_y1hx / [15: 8] : hue_byya_y2hx
                                                  // [23:16] : hue_byya_y3hx / [31:24] : hue_byya_y4hx

////========= NODE 6 COEFFICIENT ==============////

    #define REG_CM2_ENH_COEFF0_H06      0x130   // default 32'H0
                                                  // [ 7: 0] : luma_byh_hx   / [15: 8] : sat_byhs_s0hx
                                                  // [23:16] : sat_byhs_s0hx / [31:24] : sat_byhs_s2hx
    #define REG_CM2_ENH_COEFF1_H06      0x131   // default 32'H0
                                                  // [ 7: 0] : hue_byh_hx   / [15: 8] : hue_byy_y0hx
                                                  // [23:16] : hue_byy_y1hx / [31:24] : hue_byy_y2hx
    #define REG_CM2_ENH_COEFF2_H06      0x132   // default 32'H0
                                                  // [ 7: 0] : hue_byy_y3hx / [15: 8] : hue_byy_y4hx
                                                  // [23:16] : hue_bys_s0hx / [31:24] : hue_bys_s1hx
    #define REG_CM2_ENH_COEFF3_H06      0x133   // default 32'H0
                                                  // [ 7: 0] : hue_bys_s2hx / [15: 8] : hue_bys_s3hx
                                                  // [23:16] : hue_bys_s4hx / [31:24] : hue_byya_y0hx
    #define REG_CM2_ENH_COEFF4_H06      0x134   // default 32'H0
                                                  // [ 7: 0] : hue_byya_y1hx / [15: 8] : hue_byya_y2hx
                                                  // [23:16] : hue_byya_y3hx / [31:24] : hue_byya_y4hx

////========= NODE 7 COEFFICIENT ==============////

    #define REG_CM2_ENH_COEFF0_H07      0x138   // default 32'H0
                                                  // [ 7: 0] : luma_byh_hx   / [15: 8] : sat_byhs_s0hx
                                                  // [23:16] : sat_byhs_s0hx / [31:24] : sat_byhs_s2hx
    #define REG_CM2_ENH_COEFF1_H07      0x139   // default 32'H0
                                                  // [ 7: 0] : hue_byh_hx   / [15: 8] : hue_byy_y0hx
                                                  // [23:16] : hue_byy_y1hx / [31:24] : hue_byy_y2hx
    #define REG_CM2_ENH_COEFF2_H07      0x13a   // default 32'H0
                                                  // [ 7: 0] : hue_byy_y3hx / [15: 8] : hue_byy_y4hx
                                                  // [23:16] : hue_bys_s0hx / [31:24] : hue_bys_s1hx
    #define REG_CM2_ENH_COEFF3_H07      0x13b   // default 32'H0
                                                  // [ 7: 0] : hue_bys_s2hx / [15: 8] : hue_bys_s3hx
                                                  // [23:16] : hue_bys_s4hx / [31:24] : hue_byya_y0hx
    #define REG_CM2_ENH_COEFF4_H07      0x13c   // default 32'H0
                                                  // [ 7: 0] : hue_byya_y1hx / [15: 8] : hue_byya_y2hx
                                                  // [23:16] : hue_byya_y3hx / [31:24] : hue_byya_y4hx

////========= NODE 8 COEFFICIENT ==============////

    #define REG_CM2_ENH_COEFF0_H08      0x140   // default 32'H0
                                                  // [ 7: 0] : luma_byh_hx   / [15: 8] : sat_byhs_s0hx
                                                  // [23:16] : sat_byhs_s0hx / [31:24] : sat_byhs_s2hx
    #define REG_CM2_ENH_COEFF1_H08      0x141   // default 32'H0
                                                  // [ 7: 0] : hue_byh_hx   / [15: 8] : hue_byy_y0hx
                                                  // [23:16] : hue_byy_y1hx / [31:24] : hue_byy_y2hx
    #define REG_CM2_ENH_COEFF2_H08      0x142   // default 32'H0
                                                  // [ 7: 0] : hue_byy_y3hx / [15: 8] : hue_byy_y4hx
                                                  // [23:16] : hue_bys_s0hx / [31:24] : hue_bys_s1hx
    #define REG_CM2_ENH_COEFF3_H08      0x143   // default 32'H0
                                                  // [ 7: 0] : hue_bys_s2hx / [15: 8] : hue_bys_s3hx
                                                  // [23:16] : hue_bys_s4hx / [31:24] : hue_byya_y0hx
    #define REG_CM2_ENH_COEFF4_H08      0x144   // default 32'H0
                                                  // [ 7: 0] : hue_byya_y1hx / [15: 8] : hue_byya_y2hx
                                                  // [23:16] : hue_byya_y3hx / [31:24] : hue_byya_y4hx

////========= NODE 9 COEFFICIENT ==============////

    #define REG_CM2_ENH_COEFF0_H09      0x148   // default 32'H0
                                                  // [ 7: 0] : luma_byh_hx   / [15: 8] : sat_byhs_s0hx
                                                  // [23:16] : sat_byhs_s0hx / [31:24] : sat_byhs_s2hx
    #define REG_CM2_ENH_COEFF1_H09      0x149   // default 32'H0
                                                  // [ 7: 0] : hue_byh_hx   / [15: 8] : hue_byy_y0hx
                                                  // [23:16] : hue_byy_y1hx / [31:24] : hue_byy_y2hx
    #define REG_CM2_ENH_COEFF2_H09      0x14a   // default 32'H0
                                                  // [ 7: 0] : hue_byy_y3hx / [15: 8] : hue_byy_y4hx
                                                  // [23:16] : hue_bys_s0hx / [31:24] : hue_bys_s1hx
    #define REG_CM2_ENH_COEFF3_H09      0x14b   // default 32'H0
                                                  // [ 7: 0] : hue_bys_s2hx / [15: 8] : hue_bys_s3hx
                                                  // [23:16] : hue_bys_s4hx / [31:24] : hue_byya_y0hx
    #define REG_CM2_ENH_COEFF4_H09      0x14c   // default 32'H0
                                                  // [ 7: 0] : hue_byya_y1hx / [15: 8] : hue_byya_y2hx
                                                  // [23:16] : hue_byya_y3hx / [31:24] : hue_byya_y4hx

////========= NODE 10 COEFFICIENT ==============////

    #define REG_CM2_ENH_COEFF0_H10      0x150   // default 32'H0
                                                  // [ 7: 0] : luma_byh_hx   / [15: 8] : sat_byhs_s0hx
                                                  // [23:16] : sat_byhs_s0hx / [31:24] : sat_byhs_s2hx
    #define REG_CM2_ENH_COEFF1_H10      0x151   // default 32'H0
                                                  // [ 7: 0] : hue_byh_hx   / [15: 8] : hue_byy_y0hx
                                                  // [23:16] : hue_byy_y1hx / [31:24] : hue_byy_y2hx
    #define REG_CM2_ENH_COEFF2_H10      0x152   // default 32'H0
                                                  // [ 7: 0] : hue_byy_y3hx / [15: 8] : hue_byy_y4hx
                                                  // [23:16] : hue_bys_s0hx / [31:24] : hue_bys_s1hx
    #define REG_CM2_ENH_COEFF3_H10      0x153   // default 32'H0
                                                  // [ 7: 0] : hue_bys_s2hx / [15: 8] : hue_bys_s3hx
                                                  // [23:16] : hue_bys_s4hx / [31:24] : hue_byya_y0hx
    #define REG_CM2_ENH_COEFF4_H10      0x154   // default 32'H0
                                                  // [ 7: 0] : hue_byya_y1hx / [15: 8] : hue_byya_y2hx
                                                  // [23:16] : hue_byya_y3hx / [31:24] : hue_byya_y4hx

////========= NODE 11 COEFFICIENT ==============////

    #define REG_CM2_ENH_COEFF0_H11      0x158   // default 32'H0
                                                  // [ 7: 0] : luma_byh_hx   / [15: 8] : sat_byhs_s0hx
                                                  // [23:16] : sat_byhs_s0hx / [31:24] : sat_byhs_s2hx
    #define REG_CM2_ENH_COEFF1_H11      0x159   // default 32'H0
                                                  // [ 7: 0] : hue_byh_hx   / [15: 8] : hue_byy_y0hx
                                                  // [23:16] : hue_byy_y1hx / [31:24] : hue_byy_y2hx
    #define REG_CM2_ENH_COEFF2_H11      0x15a   // default 32'H0
                                                  // [ 7: 0] : hue_byy_y3hx / [15: 8] : hue_byy_y4hx
                                                  // [23:16] : hue_bys_s0hx / [31:24] : hue_bys_s1hx
    #define REG_CM2_ENH_COEFF3_H11      0x15b   // default 32'H0
                                                  // [ 7: 0] : hue_bys_s2hx / [15: 8] : hue_bys_s3hx
                                                  // [23:16] : hue_bys_s4hx / [31:24] : hue_byya_y0hx
    #define REG_CM2_ENH_COEFF4_H11      0x15c   // default 32'H0
                                                  // [ 7: 0] : hue_byya_y1hx / [15: 8] : hue_byya_y2hx
                                                  // [23:16] : hue_byya_y3hx / [31:24] : hue_byya_y4hx

////========= NODE 12 COEFFICIENT ==============////

    #define REG_CM2_ENH_COEFF0_H12      0x160   // default 32'H0
                                                  // [ 7: 0] : luma_byh_hx   / [15: 8] : sat_byhs_s0hx
                                                  // [23:16] : sat_byhs_s0hx / [31:24] : sat_byhs_s2hx
    #define REG_CM2_ENH_COEFF1_H12      0x161   // default 32'H0
                                                  // [ 7: 0] : hue_byh_hx   / [15: 8] : hue_byy_y0hx
                                                  // [23:16] : hue_byy_y1hx / [31:24] : hue_byy_y2hx
    #define REG_CM2_ENH_COEFF2_H12      0x162   // default 32'H0
                                                  // [ 7: 0] : hue_byy_y3hx / [15: 8] : hue_byy_y4hx
                                                  // [23:16] : hue_bys_s0hx / [31:24] : hue_bys_s1hx
    #define REG_CM2_ENH_COEFF3_H12      0x163   // default 32'H0
                                                  // [ 7: 0] : hue_bys_s2hx / [15: 8] : hue_bys_s3hx
                                                  // [23:16] : hue_bys_s4hx / [31:24] : hue_byya_y0hx
    #define REG_CM2_ENH_COEFF4_H12      0x164   // default 32'H0
                                                  // [ 7: 0] : hue_byya_y1hx / [15: 8] : hue_byya_y2hx
                                                  // [23:16] : hue_byya_y3hx / [31:24] : hue_byya_y4hx

////========= NODE 13 COEFFICIENT ==============////

    #define REG_CM2_ENH_COEFF0_H13      0x168   // default 32'H0
                                                  // [ 7: 0] : luma_byh_hx   / [15: 8] : sat_byhs_s0hx
                                                  // [23:16] : sat_byhs_s0hx / [31:24] : sat_byhs_s2hx
    #define REG_CM2_ENH_COEFF1_H13      0x169   // default 32'H0
                                                  // [ 7: 0] : hue_byh_hx   / [15: 8] : hue_byy_y0hx
                                                  // [23:16] : hue_byy_y1hx / [31:24] : hue_byy_y2hx
    #define REG_CM2_ENH_COEFF2_H13      0x16a   // default 32'H0
                                                  // [ 7: 0] : hue_byy_y3hx / [15: 8] : hue_byy_y4hx
                                                  // [23:16] : hue_bys_s0hx / [31:24] : hue_bys_s1hx
    #define REG_CM2_ENH_COEFF3_H13      0x16b   // default 32'H0
                                                  // [ 7: 0] : hue_bys_s2hx / [15: 8] : hue_bys_s3hx
                                                  // [23:16] : hue_bys_s4hx / [31:24] : hue_byya_y0hx
    #define REG_CM2_ENH_COEFF4_H13      0x16c   // default 32'H0
                                                  // [ 7: 0] : hue_byya_y1hx / [15: 8] : hue_byya_y2hx
                                                  // [23:16] : hue_byya_y3hx / [31:24] : hue_byya_y4hx


/* Constraints
0)
  there are 16 regions totally. 8 regions are for hue adjustment, 8 regions are for sat adjustment.
  the hue range of the 16 regions can be set to overlap, but if overlap, the hue range(start and end) must be same.
  the 8 regions for hue adjustment should not overlap. if corresponding reg_hue_en_00 - 07 == 1
  the 8 regions for hue adjustment are defined by: (example are for region 0)
    a) hue:
        start: reg_hue_hue_shift_start_00[14:0]
        end:
        if reg_symmetry_en_00 == 0
        reg_hue_hue_shift_start_00[14:0] + (reg_hue_hue_shift_range_00[7:0]<<5)
        if reg_symmetry_en_00 == 1
        reg_hue_hue_shift_start_00[14:0] + (reg_hue_hue_shift_range_00[7:0]<<6)
    b) sat:
        start: reg_hue_sat_low_00
        end:   reg_hue_sat_high_00

  the 8 regions for sat adjustment should not overlap. if corresponding reg_sat_en_00 - 07 == 1
  the 8 regions for sat adjustment are defined by: (example are for region 0)
    a) hue: same as that for hue adjustment.
        start: reg_hue_hue_shift_start_00[14:0]
        end:
        if reg_symmetry_en_00 == 0
        reg_hue_hue_shift_start_00[14:0] + (reg_hue_hue_shift_range_00[7:0]<<5)
        if reg_symmetry_en_00 == 1
        reg_hue_hue_shift_start_00[14:0] + (reg_hue_hue_shift_range_00[7:0]<<6)
    b) sat:
        start: reg_sat_sat_low_00
        end:   reg_sat_sat_high_00

1)
  reg_hue_hue_shift_range_00[7:0]:
  reg_hue_hue_shift_range_01[7:0]:
  reg_hue_hue_shift_range_02[7:0]:
  reg_hue_hue_shift_range_03[7:0]:
  reg_hue_hue_shift_range_04[7:0]:
  reg_hue_hue_shift_range_05[7:0]:
  reg_hue_hue_shift_range_06[7:0]:
  reg_hue_hue_shift_range_07[7:0]:
  must be greater or equal than 8'd8, so as reg_hue_range_inv_regxx can be represented by 0.0000_0000_xxxx_xxxx_xxxx_xxxx

2)
  all regions of 0-7 should meet below requirement. below is just an example for region 7.
  (reg_hue_lum_high_07 - reg_hue_lum_low_07) >=
        (1<<reg_hue_lum_low_slope_07) + (1<<reg_hue_lum_high_slope_07)

  (reg_hue_sat_high_07 - reg_hue_sat_low_07) >=
        (1<<reg_hue_sat_low_slope_07) + (1<<reg_hue_sat_high_slope_07)

  (reg_sat_lum_high_07 - reg_sat_lum_low_07) >=
        (1<<reg_sat_lum_low_slope_07) + (1<<reg_sat_lum_high_slope_07)

  (reg_sat_sat_high_07 - reg_sat_sat_low_07) >=
        (1<<reg_sat_sat_low_slope_07) + (1<<reg_sat_sat_high_slope_07)

3)
  all of reg_hue_hue_shift_start_00[14:0] ~ 07[14:0] < 0x6000.
  only region 0 and 1 can exceed 360 degrees. ie:
    reg_hue_hue_shift_start_00 + (reg_hue_hue_shift_range_00<<5) can greater than 0x6000.
    reg_hue_hue_shift_start_01 + (reg_hue_hue_shift_range_01<<5) can greater than 0x6000.
  but below should be met:
    reg_hue_hue_shift_start_00 + (reg_hue_hue_shift_range_00<<5) < 0x8000. if reg_symmetry_en_00 == 0
    reg_hue_hue_shift_start_01 + (reg_hue_hue_shift_range_00<<5) < 0x8000. if reg_symmetry_en_00 == 0
    reg_hue_hue_shift_start_00 + (reg_hue_hue_shift_range_00<<6) < 0x8000. if reg_symmetry_en_00 == 1
    reg_hue_hue_shift_start_01 + (reg_hue_hue_shift_range_00<<6) < 0x8000. if reg_symmetry_en_00 == 1

  others could not exceed 360 degrees. ie:
    reg_hue_hue_shift_start_02(to 7) + (reg_hue_hue_shift_range_02 (to 7) <<5) < 0x6000. if reg_symmetry_en_02 (to 7) == 0.
    reg_hue_hue_shift_start_02(to 7) + (reg_hue_hue_shift_range_02 (to 7) <<6) < 0x6000. if reg_symmetry_en_02 (to 7) == 1.

4)
  reg_hue_gain_00[7:0] <= 0x80.
  reg_hue_gain_01[7:0] <= 0x80.
  reg_hue_gain_02[7:0] <= 0x80.
  reg_hue_gain_03[7:0] <= 0x80.
  reg_hue_gain_04[7:0] <= 0x80.
  reg_hue_gain_05[7:0] <= 0x80.
  reg_hue_gain_06[7:0] <= 0x80.
  reg_hue_gain_07[7:0] <= 0x80.

5)
  below registers can only have two setting: 00 and 01.
    reg_hue_central_en_00[1:0]  .. _07[1:0]
    reg_sat_central_en_00[1:0]  .. _07[1:0]

6)
  all reg_..._slope_00-07 should not be greater than 7, ie: maximum value is 7.
   for example: below is for region 0:
   reg_hue_lum_low_slope_00[3:0]  <= 7
   reg_hue_lum_high_slope_00[3:0] <= 7
   reg_hue_sat_low_slope_00[3:0]  <= 7
   reg_hue_sat_high_slope_00[3:0] <= 7
   reg_sat_lum_low_slope_00[3:0]  <= 7
   reg_sat_lum_high_slope_00[3:0] <= 7
   reg_sat_sat_low_slope_00[3:0]  <= 7
   reg_sat_sat_high_slope_00[3:0] <= 7
*/

// synopsys translate_off
// synopsys translate_on
//
// Closing file:  chroma_reg.h
//
//(hsvsharp), (blue), gainoff, mat_vd1,mat_vd2, mat_post, prebld, postbld,(hsharp),sco_ff, vadj1, vadj2, ofifo, (chroma1), clk0(free_clk) vpp_reg
//each item 2bits, for each 2bits, if bit 2*i+1 == 1, free clk, else if bit 2*i == 1 no clk, else auto gated clock
//bit1 is not used, because I can not turn off vpp_reg clk because I can not turn on again
//because the register itself canot be set again without clk
//Bit 31:0
#define VPP_GCLK_CTRL0                             ((0x1d72  << 2) + 0xff900000)
//(front_lti), (front_cti), Chroma2_filter, Chroma2, (Ccoring), (blackext), dnlp
//Bit 13:0
#define VPP_GCLK_CTRL1                             ((0x1d73  << 2) + 0xff900000)
//prehsc_clk, line_buf, prevsc, vsc, hsc_clk, clk0(free_clk)
//Bit 11:0
#define VPP_SC_GCLK_CTRL                           ((0x1d74  << 2) + 0xff900000)
//Bit 17:9 VD1 alpha for preblend
//Bit 8:0 VD1 alpha for postblend
#define VPP_MISC1                                  ((0x1d76  << 2) + 0xff900000)
//Bit 31:0 super scalar clock control
#define VPP_SRSCL_GCLK_CTRL                        ((0x1d77  << 2) + 0xff900000)
//Bit 31:0 OSD super scalar clock control
#define VPP_OSDSR_GCLK_CTRL                        ((0x1d78  << 2) + 0xff900000)
//Bit 31:0 vvycc clock control
#define VPP_XVYCC_GCLK_CTRL                        ((0x1d79  << 2) + 0xff900000)
//Bit 31:24     blackext_start
//Bit 23:16     blackext_slope1
//Bit 15:8      blackext_midpt
//Bit 7:0       blackext_slope2
#define VPP_BLACKEXT_CTRL                          ((0x1d80  << 2) + 0xff900000)
//Bit 31:24     bottom of region03 output value
//Bit 23:16     bottom of region02 output value
//Bit 15:8      bottom of region01 output value
//Bit 7:0       bottom of region00 output value
#define VPP_DNLP_CTRL_00                           ((0x1d81  << 2) + 0xff900000)
//Bit 31:24     bottom of region07 output value
//Bit 23:16     bottom of region06 output value
//Bit 15:8      bottom of region05 output value
//Bit 7:0       bottom of region04 output value
#define VPP_DNLP_CTRL_01                           ((0x1d82  << 2) + 0xff900000)
//Bit 31:24     bottom of region11 output value
//Bit 23:16     bottom of region10 output value
//Bit 15:8      bottom of region09 output value
//Bit 7:0       bottom of region08 output value
#define VPP_DNLP_CTRL_02                           ((0x1d83  << 2) + 0xff900000)
//Bit 31:24     bottom of region15 output value
//Bit 23:16     bottom of region14 output value
//Bit 15:8      bottom of region13 output value
//Bit 7:0       bottom of region12 output value
#define VPP_DNLP_CTRL_03                           ((0x1d84  << 2) + 0xff900000)
//Bit 31:24     bottom of region19 output value
//Bit 23:16     bottom of region18 output value
//Bit 15:8      bottom of region17 output value
//Bit 7:0       bottom of region16 output value
#define VPP_DNLP_CTRL_04                           ((0x1d85  << 2) + 0xff900000)
//Bit 31:24     bottom of region23 output value
//Bit 23:16     bottom of region22 output value
//Bit 15:8      bottom of region21 output value
//Bit 7:0       bottom of region20 output value
#define VPP_DNLP_CTRL_05                           ((0x1d86  << 2) + 0xff900000)
//Bit 31:24     bottom of region27 output value
//Bit 23:16     bottom of region26 output value
//Bit 15:8      bottom of region25 output value
//Bit 7:0       bottom of region24 output value
#define VPP_DNLP_CTRL_06                           ((0x1d87  << 2) + 0xff900000)
//Bit 31:24     bottom of region31 output value
//Bit 23:16     bottom of region30 output value
//Bit 15:8      bottom of region29 output value
//Bit 7:0       bottom of region28 output value
#define VPP_DNLP_CTRL_07                           ((0x1d88  << 2) + 0xff900000)
//Bit 31:24     bottom of region35 output value
//Bit 23:16     bottom of region34 output value
//Bit 15:8      bottom of region33 output value
//Bit 7:0       bottom of region32 output value
#define VPP_DNLP_CTRL_08                           ((0x1d89  << 2) + 0xff900000)
//Bit 31:24     bottom of region39 output value
//Bit 23:16     bottom of region38 output value
//Bit 15:8      bottom of region37 output value
//Bit 7:0       bottom of region36 output value
#define VPP_DNLP_CTRL_09                           ((0x1d8a  << 2) + 0xff900000)
//Bit 31:24     bottom of region43 output value
//Bit 23:16     bottom of region42 output value
//Bit 15:8      bottom of region41 output value
//Bit 7:0       bottom of region40 output value
#define VPP_DNLP_CTRL_10                           ((0x1d8b  << 2) + 0xff900000)
//Bit 31:24     bottom of region47 output value
//Bit 23:16     bottom of region46 output value
//Bit 15:8      bottom of region45 output value
//Bit 7:0       bottom of region44 output value
#define VPP_DNLP_CTRL_11                           ((0x1d8c  << 2) + 0xff900000)
//Bit 31:24     bottom of region51 output value
//Bit 23:16     bottom of region50 output value
//Bit 15:8      bottom of region49 output value
//Bit 7:0       bottom of region48 output value
#define VPP_DNLP_CTRL_12                           ((0x1d8d  << 2) + 0xff900000)
//Bit 31:24     bottom of region55 output value
//Bit 23:16     bottom of region54 output value
//Bit 15:8      bottom of region53 output value
//Bit 7:0       bottom of region52 output value
#define VPP_DNLP_CTRL_13                           ((0x1d8e  << 2) + 0xff900000)
//Bit 31:24     bottom of region59 output value
//Bit 23:16     bottom of region58 output value
//Bit 15:8      bottom of region57 output value
//Bit 7:0       bottom of region56 output value
#define VPP_DNLP_CTRL_14                           ((0x1d8f  << 2) + 0xff900000)
//Bit 31:24     bottom of region63 output value
//Bit 23:16     bottom of region62 output value
//Bit 15:8      bottom of region61 output value
//Bit 7:0       bottom of region60 output value
#define VPP_DNLP_CTRL_15                           ((0x1d90  << 2) + 0xff900000)
// `define VPP_PEAKING_HGAIN       8'h91   //32'h0
// `define VPP_PEAKING_VGAIN       8'h92   //32'h0
// `define VPP_PEAKING_NLP_1       8'h93   //32'h0
// `define VPP_PEAKING_NLP_2       8'h94   //32'h0
// `define VPP_PEAKING_NLP_3       8'h95   //32'h0
// `define VPP_PEAKING_NLP_4       8'h96   //32'h0
// `define VPP_PEAKING_NLP_5       8'h97   //32'h0
// `define VPP_SHARP_LIMIT         8'h98   //32'h0
// `define VPP_VLTI_CTRL           8'h99   //32'h0
// `define VPP_HLTI_CTRL           8'h9a   //32'h0
// `define VPP_CTI_CTRL            8'h9b   //32'h0
#define VPP_SRSHARP0_CTRL                          ((0x1d91  << 2) + 0xff900000)
//Bit 31:29  reserved
//Bit 28:16  srsharp_demo_split_sz   srsharp demo top/bot left/right width
//Bit 15:6   reserved
//Bit 5:4    srsharp_demo_disp_post  srsharp demo display postion
//Bit 3      srsharp_demo_en         srsharp demo enable
//Bit 2      srsharp_c444to422_en    srsharp format444 convert 422 enable
//Bit 1,     srsharp_buf_en          srsharp buffer enable
//Bit 0,     srsharp_en              srsharp enable
#define VPP_SRSHARP1_CTRL                          ((0x1d92  << 2) + 0xff900000)
//Bit 31:29  reserved
//Bit 28:16  srsharp_demo_split_sz   srsharp demo top/bot left/right width
//Bit 15:6   reserved
//Bit 5:4    srsharp_demo_disp_post  srsharp demo display postion
//Bit 3      srsharp_demo_en         srsharp demo enable
//Bit 2      srsharp_c444to422_en    srsharp format444 convert 422 enable
//Bit 1,     srsharp_buf_en          srsharp buffer enable
//Bit 0,     srsharp_en              srsharp enable
#define VPP_DOLBY_CTRL                             ((0x1d93  << 2) + 0xff900000)
//todo
#define VPP_DAT_CONV_PARA0                         ((0x1d94  << 2) + 0xff900000)
#define VPP_DAT_CONV_PARA1                         ((0x1d95  << 2) + 0xff900000)
//todo
#define VPP_SYNC_SEL0                              ((0x1d96  << 2) + 0xff900000)
#define VPP_VADJ1_BLACK_VAL                        ((0x1d97  << 2) + 0xff900000)
#define VPP_VADJ2_BLACK_VAL                        ((0x1d98  << 2) + 0xff900000)
//Bit 29        blue_stretch_cb_inc
//Bit 28        blue_stretch_cr_inc
//Bit 27        the MSB of blue_stretch_error_crp_inv[11:0]
//Bit 26        the MSB of blue_stretch_error_crn_inv[11:0]
//Bit 25        the MSB of blue_stretch_error_cbp_inv[11:0]
//Bit 24        the MSB of blue_stretch_error_cbn_inv[11:0]
//Bit 23:16     blue_stretch_gain
//Bit 15:8      blue_stretch_gain_cb4cr
//Bit 7:0       blue_stretch_luma_high
#define VPP_BLUE_STRETCH_1                         ((0x1d9c  << 2) + 0xff900000)
//Bit 31:27     blue_stretch_error_crp
//Bit 26:16     the 11 LSB of blue_stretch_error_crp_inv[11:0]
//Bit 15:11     blue_stretch_error_crn
//Bit 10:0      the 11 LSB of blue_stretch_error_crn_inv[11:0]
#define VPP_BLUE_STRETCH_2                         ((0x1d9d  << 2) + 0xff900000)
//Bit 31:27     blue_stretch_error_cbp
//Bit 26:16     the 11 LSB of blue_stretch_error_cbp_inv[11:0]
//Bit 15:11     blue_stretch_error_cbn
//Bit 10:0      the 11 LSB of blue_stretch_error_cbn_inv[11:0]
#define VPP_BLUE_STRETCH_3                         ((0x1d9e  << 2) + 0xff900000)
//Bit 25:16 bypass_ccoring_ythd
//Bit 15:8, Chroma coring threshold
//Bit 3:0, Chroma coring slope
#define VPP_CCORING_CTRL                           ((0x1da0  << 2) + 0xff900000)
//Bit 20 demo chroma coring enable
//Bit 19 demo black enxtension enable
//Bit 18 demo dynamic nonlinear luma processing enable
//Bit 17 demo hsvsharp enable
//Bit 16 demo bluestretch enable
//Bit 15:14, 2'b00: demo adjust on top, 2'b01: demo adjust on bottom, 2'b10: demo adjust on left, 2'b11: demo adjust on right
//Bit 4 chroma coring enable
//Bit 3 black enxtension enable
//Bit 2 dynamic nonlinear luma processing enable
//Bit 1 hsvsharp enable
//Bit 0 bluestretch enable
#define VPP_VE_ENABLE_CTRL                         ((0x1da1  << 2) + 0xff900000)
//Bit 12:0, demo left or top screen width
#define VPP_VE_DEMO_LEFT_TOP_SCREEN_WIDTH          ((0x1da2  << 2) + 0xff900000)
#define VPP_VE_DEMO_CENTER_BAR                     ((0x1da3  << 2) + 0xff900000)
//28:16  ve_line_length
//12:0   ve_pic_height
#define VPP_VE_H_V_SIZE                            ((0x1da4  << 2) + 0xff900000)
//28:16  vppout_line_length
//12:0   vppout_pic_height
#define VPP_OUT_H_V_SIZE                           ((0x1da5  << 2) + 0xff900000)
//28:16  vppin_line_length
//12:0   vppin_pic_height
#define VPP_IN_H_V_SIZE                            ((0x1da6  << 2) + 0xff900000)
//Bit 10   reset bit, high active
//Bit 9    0: measuring rising edge, 1: measuring falling edge
//Bit 8    if true, accumulate the counter number, otherwise not
//Bit 7:0  vsync_span, define how many vsync span need to measure
#define VPP_VDO_MEAS_CTRL                          ((0x1da8  << 2) + 0xff900000)
//Read only
//19:16  ind_meas_count_n, every number of sync_span vsyncs, this counter add 1
//15:0, high bit portion of counter
#define VPP_VDO_MEAS_VS_COUNT_HI                   ((0x1da9  << 2) + 0xff900000)
//Read only
//31:0, low bit portion of counter
#define VPP_VDO_MEAS_VS_COUNT_LO                   ((0x1daa  << 2) + 0xff900000)
//bit 11:9 vd2_sel,  001: select vd1_din, 010: select vd2_din, 011: select d2d3_l_din, 100: d2d3_r_din, otherwise no selection
//bit 8:6 vd1_l_sel, 001: select vd1_din, 010: select vd2_din, 011: select d2d3_l_din, 100: d2d3_r_din, otherwise no selection
//bit 5:3 vd1_r_sel, 001: select vd1_din, 010: select vd2_din, 011: select d2d3_l_din, 100: d2d3_r_din, otherwise no selection
//note: the source vd1_l_sel selected cannot be used as the source of vd1_r_sel or vd2_sel
// vd1_r_sel is useful only vd1_interleave_mode is not 00. And the source vd1_r_sel used can not used for the vd2_sel any more.
//bit 2:0 vd1_interleave_mode, 000: no interleave, 001: pixel interleaving, 010: line interleaving, 011: 2 pixel interleaving,
// 100: 2 line interleaving
#define VPP_INPUT_CTRL                             ((0x1dab  << 2) + 0xff900000)
//bit 25:24 cti_bpf_sel
//bit 20:16 cti_blend_factor_gama
//bit 12:8 cti_blend_factor_beta
//bit 4:0 cti_blend_factor_alpha
#define VPP_CTI_CTRL2                              ((0x1dac  << 2) + 0xff900000)
#define VPP_PEAKING_SAT_THD1                       ((0x1dad  << 2) + 0xff900000)
#define VPP_PEAKING_SAT_THD2                       ((0x1dae  << 2) + 0xff900000)
#define VPP_PEAKING_SAT_THD3                       ((0x1daf  << 2) + 0xff900000)
#define VPP_PEAKING_SAT_THD4                       ((0x1db0  << 2) + 0xff900000)
#define VPP_PEAKING_SAT_THD5                       ((0x1db1  << 2) + 0xff900000)
#define VPP_PEAKING_SAT_THD6                       ((0x1db2  << 2) + 0xff900000)
#define VPP_PEAKING_SAT_THD7                       ((0x1db3  << 2) + 0xff900000)
#define VPP_PEAKING_SAT_THD8                       ((0x1db4  << 2) + 0xff900000)
#define VPP_PEAKING_SAT_THD9                       ((0x1db5  << 2) + 0xff900000)
#define VPP_PEAKING_GAIN_ADD1                      ((0x1db6  << 2) + 0xff900000)
#define VPP_PEAKING_GAIN_ADD2                      ((0x1db7  << 2) + 0xff900000)
//bit 23:16 peaking_dnlp_gain, u5.3, DNLP effect
//bit 15:8  peaking_factor
//bit 5     peaking_dnlp_demo_en
//bit 4     peaking_dnlp_en
//bit 3:0   peaking_filter_sel
#define VPP_PEAKING_DNLP                           ((0x1db8  << 2) + 0xff900000)
//bit 24    sharp_demo_win_en
//bit 23:12 sharp_demo_win_vend
//bit 11:0  sharp_demo_win_vstart
#define VPP_SHARP_DEMO_WIN_CTRL1                   ((0x1db9  << 2) + 0xff900000)
//bit 23:12 sharp_demo_win_hend
//bit 11:0  sharp_demo_win_hstart
#define VPP_SHARP_DEMO_WIN_CTRL2                   ((0x1dba  << 2) + 0xff900000)
//Bit 31:24     front_hlti_neg_gain
//Bit 23:16     front_hlti_pos_gain
//Bit 15:8      front_hlti_threshold
//Bit 7:0       front_hlti_blend_factor
#define VPP_FRONT_HLTI_CTRL                        ((0x1dbb  << 2) + 0xff900000)
//Bit 31        front_enable, enable the front LTI&CTI before scaler
//Bit 26:24     front_cti_step2
//Bit 23:21     front_cti_step
//Bit 20:16     front_cti_blend_factor
//Bit 15        front_cti_median_mode
//Bit 14:8      front_cti_threshold
//Bit 7:0       front_cti_gain
#define VPP_FRONT_CTI_CTRL                         ((0x1dbc  << 2) + 0xff900000)
//bit 29:28 front_hlti_step
//bit 25:24 front_cti_bpf_sel
//bit 20:16 front_cti_blend_factor_gama
//bit 12:8  front_cti_blend_factor_beta
//bit 4:0   front_cti_blend_factor_alpha
#define VPP_FRONT_CTI_CTRL2                        ((0x1dbd  << 2) + 0xff900000)
//vertical scaler phase step
//Bit 27:0,  4.24 format
#define VPP_OSD_VSC_PHASE_STEP                     ((0x1dc0  << 2) + 0xff900000)
//Bit 31:16, botttom vertical scaler initial phase
//Bit 15:0, top vertical scaler initial phase
#define VPP_OSD_VSC_INI_PHASE                      ((0x1dc1  << 2) + 0xff900000)
//Bit 24    osd vertical Scaler enable
//Bit 23    osd_prog_interlace 0: current field is progressive, 1: current field is interlace
//Bit 22:21 osd_vsc_double_line_mode, bit1, double input width and half input height, bit0, change line buffer becomes 2 lines
//Bit 20    osd_vsc_phase0_always_en
//Bit 19    osd_vsc_nearest_en
//Bit 17:16 osd_vsc_bot_rpt_l0_num
//Bit 14:11 osd_vsc_bot_ini_rcv_num
//Bit 9:8   osd_vsc_top_rpt_l0_num
//Bit 6:3   osd_vsc_top_ini_rcv_num
//Bit 2:0   osd_vsc_bank_length
#define VPP_OSD_VSC_CTRL0                          ((0x1dc2  << 2) + 0xff900000)
//horizontal scaler phase step
//Bit 27:0,  4.24 format
#define VPP_OSD_HSC_PHASE_STEP                     ((0x1dc3  << 2) + 0xff900000)
//Bit 31:16, horizontal scaler initial phase1
//Bit 15:0, horizontal scaler initial phase0
#define VPP_OSD_HSC_INI_PHASE                      ((0x1dc4  << 2) + 0xff900000)
//Bit 22   osd horizontal scaler enable
//Bit 21   osd_hsc_double_pix_mode
//Bit 20   osd_hsc_phase0_always_en
//Bit 19   osd_hsc_nearest_en
//Bit 17:16 osd_hsc_rpt_p0_num1
//Bit 14:11 osd_hsc_ini_rcv_num1
//Bit 9:8   osd_hsc_rpt_p0_num0
//Bit 6:3   osd_hsc_ini_rcv_num0
//Bit 2:0   osd_hsc_bank_length
#define VPP_OSD_HSC_CTRL0                          ((0x1dc5  << 2) + 0xff900000)
//for 3D quincunx sub-sampling
//bit 15:8 pattern, each patten 1 bit, from lsb -> msb
//bit 6:4  pattern start
//bit 2:0  pattern end
#define VPP_OSD_HSC_INI_PAT_CTRL                   ((0x1dc6  << 2) + 0xff900000)
//bit 31:24, componet 0
//bit 23:16, component 1
//bit 15:8, component 2
//bit 7:0 component 3, alpha
#define VPP_OSD_SC_DUMMY_DATA                      ((0x1dc7  << 2) + 0xff900000)
//Bit 14 osc_sc_din_osd1_alpha_mode, 1: (alpha >= 128) ? alpha -1: alpha,  0: (alpha >=1) ? alpha - 1: alpha.
//Bit 13 osc_sc_din_osd2_alpha_mode, 1: (alpha >= 128) ? alpha -1: alpha,  0: (alpha >=1) ? alpha - 1: alpha.
//Bit 12 osc_sc_dout_alpha_mode, 1: (alpha >= 128) ? alpha + 1: alpha, 0: (alpha >=1) ? alpha + 1: alpha.
//Bit 12 osc_sc_alpha_mode, 1: (alpha >= 128) ? alpha + 1: alpha, 0: (alpha >=1) ? alpha + 1: alpha.
//Bit 11:4 default alpha for vd1 or vd2 if they are selected as the source
//Bit 3 osd scaler path enable
//Bit 1:0 osd_sc_sel, 00: select osd1 input, 01: select osd2 input, 10: select vd1 input, 11: select vd2 input after matrix
#define VPP_OSD_SC_CTRL0                           ((0x1dc8  << 2) + 0xff900000)
//Bit 28:16 OSD scaler input width minus 1
//Bit 12:0 OSD scaler input height minus 1
#define VPP_OSD_SCI_WH_M1                          ((0x1dc9  << 2) + 0xff900000)
//Bit 28:16 OSD scaler output horizontal start
//Bit 12:0 OSD scaler output horizontal end
#define VPP_OSD_SCO_H_START_END                    ((0x1dca  << 2) + 0xff900000)
//Bit 28:16 OSD scaler output vertical start
//Bit 12:0 OSD scaler output vertical end
#define VPP_OSD_SCO_V_START_END                    ((0x1dcb  << 2) + 0xff900000)
//Because there are many coefficients used in the vertical filter and horizontal filters,
//indirect access the coefficients of vertical filter and horizontal filter is used.
//For vertical filter, there are 33x4 coefficients
//For horizontal filter, there are 33x4 coefficients
//Bit 15	index increment, if bit9 == 1  then (0: index increase 1, 1: index increase 2) else (index increase 2)
//Bit 14	1: read coef through cbus enable, just for debug purpose in case when we wanna check the coef in ram in correct or not
//Bit 9     if true, use 9bit resolution coef, other use 8bit resolution coef
//Bit 8   type of index, 0: vertical coef,  1: horizontal coef
//Bit 6:0 	coef index
#define VPP_OSD_SCALE_COEF_IDX                     ((0x1dcc  << 2) + 0xff900000)
//coefficients for vertical filter and horizontal filter
#define VPP_OSD_SCALE_COEF                         ((0x1dcd  << 2) + 0xff900000)
//Bit 12:0 line number use to generate interrupt when line == this number
#define VPP_INT_LINE_NUM                           ((0x1dce  << 2) + 0xff900000)
#define VPP_XVYCC_MISC                             ((0x1dcf  << 2) + 0xff900000)
// new add lti/cti in 120924
//Bit  3: 0        //default== 0  reg_hlti_dn_flt_coe[0]
//Bit  7: 4        //default== 0  reg_hlti_dn_flt_coe[1]
//Bit 11: 8        //default== 0  reg_hlti_dn_flt_coe[2]
//Bit 15:12        //default== 2  reg_hlti_dn_flt_coe[3]
//Bit 19:16        //default== 4  reg_hlti_dn_flt_coe[4]
//Bit 22:20        //default== 3  reg_hlti_dn_flt_nrm  u3: 3~7
#define VPP_HLTI_DN_FLT                            ((0x1dd0  << 2) + 0xff900000)
//Bit  7: 0        //default== 8  reg_hlti_bst_gain  u8, norm 16 as "1"
//Bit 15: 8        //default== 20 reg_hlti_bst_core  u8, norm 32 as "1"
//Bit 23:16        //default== 32 reg_hlti_oob_gain  u8, norm 32 as "1"
//Bit 28:24        //default== 0  reg_hlti_oob_core  u5
#define VPP_HLTI_GAIN                              ((0x1dd1  << 2) + 0xff900000)
//Bit  7: 0        //default== 2  reg_hlti_clp_ofst  u8,
//Bit     8        //default== 0  reg_hlti_clp_mode  u1,
//Bit 11: 9        //default== 1  reg_hlti_clp_wind  u3,
//Bit 14:12        //default== 1  reg_hlti_bst_fltr  u3,
//Bit    15        //default== 1  reg_hlti_enable    u1,
#define VPP_HLTI_PARA                              ((0x1dd2  << 2) + 0xff900000)
//Bit  3: 0        //default== 0  reg_hcti_dn_flt_coe[0]
//Bit  7: 4        //default== 0  reg_hcti_dn_flt_coe[1]
//Bit 11: 8        //default== 1  reg_hcti_dn_flt_coe[2]
//Bit 15:12        //default== 2  reg_hcti_dn_flt_coe[3]
//Bit 19:16        //default== 2  reg_hcti_dn_flt_coe[4]
//Bit 22:20        //default== 3  reg_hcti_dn_flt_nrm   u3: 3~7
#define VPP_HCTI_DN_FLT                            ((0x1dd3  << 2) + 0xff900000)
//Bit 7: 0        //default== 48 reg_hcti_bst_gain  u8, norm 16 as "1"
//Bit15: 8        //default== 17 reg_hcti_bst_core  u8, norm 32 as "1"
//Bit23:16        //default== 16 reg_hcti_oob_gain  u8, norm 32 as "1"
//Bit28:24        //default==  0 reg_hcti_oob_core  u5
#define VPP_HCTI_GAIN                              ((0x1dd4  << 2) + 0xff900000)
//Bit  7: 0        //default==  0 reg_hcti_clp_ofst  u8,
//Bit     8        //default==  1 reg_hcti_clp_mode  u1,
//Bit 11: 9        //default==  3 reg_hcti_clp_wind  u3,
//Bit 14:12        //default==  6 reg_hcti_bst_fltr  u3,
//Bit    15        //default==  1 reg_hcti_enable    u1,
#define VPP_HCTI_PARA                              ((0x1dd5  << 2) + 0xff900000)
//Bit  7: 0        //default== 48 reg_vcti_bst_gain  u8, normalize 16 as "1"
//Bit 15: 8        //default== 10 reg_vcti_bst_core  u8
//Bit 19:16        //default== 10 reg_vcti_clp_ofst  u4
//Bit    20        //default==  1 reg_vcti_clp_wind  u1, 0: wind 3, 1: wind5
#define VPP_VCTI_PARA                              ((0x1dd6  << 2) + 0xff900000)
//`define VPP_MATRIX_PROBE_COLOR1 8'hd7  //defined before
//Bit 31          //default== 0, urgent fifo hold enable
//Bit 28:12       //default== 0, urgent fifo hold line threshold
//Bit 15          //default== 0, urgent_ctrl_en
//Bit 14          //default== 0, urgent_wr, if true for write buffer
//Bit 13          //default== 0, out_inv_en
//Bit 12          //default == 0, urgent_ini_value
//Bit 11:6        //default == 0, up_th  up threshold
//Bit 5:0         //default == 0, dn_th  dn threshold
#define VPP_OFIFO_URG_CTRL                         ((0x1dd8  << 2) + 0xff900000)
#define VPP_CLIP_MISC0                             ((0x1dd9  << 2) + 0xff900000)
//Bit 29:20       // default == 1023, final clip r channel top
//Bit 19:10       // default == 1023, final clip g channel top
//Bit  9: 0       // default == 1023, final clip b channel top
#define VPP_CLIP_MISC1                             ((0x1dda  << 2) + 0xff900000)
//Bit 29:20       // default ==    0, final clip r channel bottom
//Bit 19:10       // default ==    0, final clip g channel bottom
//Bit  9: 0       // default ==    0, final clip b channel bottom
#define VPP_MATRIX_COEF13_14                       ((0x1ddb  << 2) + 0xff900000)
//Bit 28:16       // default == 0, matrix coef13
//Bit 12:0        // default == 0, matrix coef14
#define VPP_MATRIX_COEF23_24                       ((0x1ddc  << 2) + 0xff900000)
//Bit 28:16       // default == 0, matrix coef23
//Bit 12:0        // default == 0, matrix coef24
#define VPP_MATRIX_COEF15_25                       ((0x1ddd  << 2) + 0xff900000)
//Bit 28:16       // default == 0, matrix coef15
//Bit 12:0        // default == 0, matrix coef25
#define VPP_MATRIX_CLIP                            ((0x1dde  << 2) + 0xff900000)
//Bit 7:5         //  default == 0,   mat rs
//Bit 4:3         //  default == 0,   mat clmod
//Bit 2:0         //  default == 0,   mat clip enable
#define VPP_XVYCC_MISC0                            ((0x1ddf  << 2) + 0xff900000)
//Bit 29:20       // default == 1023, xvycc clip r channel top
//Bit 19:10       // default == 1023, xvycc clip g channel top
//Bit  9: 0       // default == 1023, xvycc clip b channel top
#define VPP_XVYCC_MISC1                            ((0x1de0  << 2) + 0xff900000)
//Bit 29:20       // default ==    0, xvycc clip r channel bottom
//Bit 19:10       // default ==    0, xvycc clip g channel bottom
//Bit  9: 0       // default ==    0, xvycc clip b channel bottom
#define VPP_VD1_CLIP_MISC0                         ((0x1de1  << 2) + 0xff900000)
//Bit 29:20       // default == 1023, vd1 clip r channel top
//Bit 19:10       // default == 1023, vd1 clip g channel top
//Bit  9: 0       // default == 1023, vd1 clip b channel top
#define VPP_VD1_CLIP_MISC1                         ((0x1de2  << 2) + 0xff900000)
//Bit 29:20       // default ==    0, vd1 clip r channel bottom
//Bit 19:10       // default ==    0, vd1 clip g channel bottom
//Bit  9: 0       // default ==    0, vd1 clip b channel bottom
#define VPP_VD2_CLIP_MISC0                         ((0x1de3  << 2) + 0xff900000)
//Bit 29:20       // default == 1023, vd2 clip r channel top
//Bit 19:10       // default == 1023, vd2 clip g channel top
//Bit  9: 0       // default == 1023, vd2 clip b channel top
#define VPP_VD2_CLIP_MISC1                         ((0x1de4  << 2) + 0xff900000)
//Bit 29:20       // default ==    0, vd2 clip r channel bottom
//Bit 19:10       // default ==    0, vd2 clip g channel bottom
//Bit  9: 0       // default ==    0, vd2 clip b channel bottom
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  vpp_regs.h
//
//`define VIU2_VCBUS_BASE                8'h1e
//
// Reading file:  v2regs.h
//
// synopsys translate_off
// synopsys translate_on
//===========================================================================
// Video Interface 2 Registers    0xe00 - 0xeff
//===========================================================================
// -----------------------------------------------
// CBUS_BASE:  VIU2_VCBUS_BASE = 0x1e
// -----------------------------------------------
#define VIU2_ADDR_START                            ((0x1e00  << 2) + 0xff900000)
#define VIU2_ADDR_END                              ((0x1eff  << 2) + 0xff900000)
//------------------------------------------------------------------------------
// VIU2 top-level registers
//------------------------------------------------------------------------------
// Bit  0 RW, osd1_reset
// Bit  1 RW, osd2_reset
// Bit  2 RW, vd1_reset
// Bit  3 RW, vd1_fmt_reset
// Bit  7 RW, vpp_reset
#define VIU2_SW_RESET                              ((0x1e01  << 2) + 0xff900000)
#define VIU2_SW_RESET0                             ((0x1e02  << 2) + 0xff900000)
// Bit 0 RW, software reset for mcvecrd_mif
// Bit 1 RW, software reset for mcinfowr_mif
// Bit 2 RW, software reset for mcinford_mif
//bit 8 if true, vsync interrup is generate only field == 0
//bit 7:0 fix_disable
#define VIU2_MISC_CTRL0                            ((0x1e06  << 2) + 0xff900000)
//------------------------------------------------------------------------------
// OSD1 registers
//------------------------------------------------------------------------------
// Bit    31 Reserved
// Bit    30 RW, enable_free_clk: 1=use free-running clock to drive logics;
//                                0=use gated clock for low power.
// Bit    29 R, test_rd_dsr
// Bit    28 R, osd_done
// Bit 27:24 R, osd_blk_mode
// Bit 23:22 R, osd_blk_ptr
// Bit    21 R, osd_enable
//
// Bit 20:12 RW, global_alpha
// Bit    11 RW, test_rd_en
// Bit 10: 9 Reserved for control signals
// Bit  8: 5 RW, ctrl_mtch_y
// Bit     4 RW, ctrl_422to444
// Bit  3: 0 RW, osd_blk_enable. Bit 0 to enable block 0: 1=enable, 0=disable;
//                               Bit 1 to enable block 1, and so on.
#define VIU2_OSD1_CTRL_STAT                        ((0x1e10  << 2) + 0xff900000)
// Bit 31:26 Reserved
// Bit 25:16 R, fifo_count
// Bit 15: 6 Reserved
// Bit  5: 4 RW, hold_fifo_lines[6:5]
// Bit     3 RW, rgb2yuv_full_range
// Bit     2 RW, alpha_9b_mode
// Bit     1 RW, reserved
// Bit     0 RW, color_expand_mode
#define VIU2_OSD1_CTRL_STAT2                       ((0x1e2d  << 2) + 0xff900000)
// Bit 31: 9 Reserved
// Bit     8 RW, 0 = Write LUT, 1 = Read LUT
// Bit  7: 0 RW, lut_addr
#define VIU2_OSD1_COLOR_ADDR                       ((0x1e11  << 2) + 0xff900000)
// Bit 31:24 RW, Y or R
// Bit 23:16 RW, Cb or G
// Bit 15: 8 RW, Cr or B
// Bit  7: 0 RW, Alpha
#define VIU2_OSD1_COLOR                            ((0x1e12  << 2) + 0xff900000)
// Bit 31:24 RW, Y or R
// Bit 23:16 RW, Cb or G
// Bit 15: 8 RW, Cr or B
// Bit  7: 0 RW, Alpha
#define VIU2_OSD1_TCOLOR_AG0                       ((0x1e17  << 2) + 0xff900000)
#define VIU2_OSD1_TCOLOR_AG1                       ((0x1e18  << 2) + 0xff900000)
#define VIU2_OSD1_TCOLOR_AG2                       ((0x1e19  << 2) + 0xff900000)
#define VIU2_OSD1_TCOLOR_AG3                       ((0x1e1a  << 2) + 0xff900000)
// Bit 31:30 Reserved
// Bit    29 RW, y_rev: 0=normal read, 1=reverse read in Y direction
// Bit    28 RW, x_rev: 0=normal read, 1=reverse read in X direction
// Bit 27:24 Reserved
// Bit 23:16 RW, tbl_addr
// Bit    15 RW, little_endian: 0=big endian, 1=little endian
// Bit    14 RW, rpt_y
// Bit 13:12 RW, interp_ctrl. 0x=No interpolation; 10=Interpolate with previous
//                            pixel; 11=Interpolate with the average value
//                            between previous and next pixel.
// Bit 11: 8 RW, osd_blk_mode
// Bit     7 RW, rgb_en
// Bit     6 RW, tc_alpha_en
// Bit  5: 2 RW, color_matrix
// Bit     1 RW, interlace_en
// Bit     0 RW, interlace_sel_odd
#define VIU2_OSD1_BLK0_CFG_W0                      ((0x1e1b  << 2) + 0xff900000)
#define VIU2_OSD1_BLK1_CFG_W0                      ((0x1e1f  << 2) + 0xff900000)
#define VIU2_OSD1_BLK2_CFG_W0                      ((0x1e23  << 2) + 0xff900000)
#define VIU2_OSD1_BLK3_CFG_W0                      ((0x1e27  << 2) + 0xff900000)
// Bit 31:29 Reserved
// Bit 28:16 RW, x_end
// Bit 15:13 Reserved
// Bit 12: 0 RW, x_start
#define VIU2_OSD1_BLK0_CFG_W1                      ((0x1e1c  << 2) + 0xff900000)
#define VIU2_OSD1_BLK1_CFG_W1                      ((0x1e20  << 2) + 0xff900000)
#define VIU2_OSD1_BLK2_CFG_W1                      ((0x1e24  << 2) + 0xff900000)
#define VIU2_OSD1_BLK3_CFG_W1                      ((0x1e28  << 2) + 0xff900000)
// Bit 31:29 Reserved
// Bit 28:16 RW, y_end
// Bit 15:13 Reserved
// Bit 12: 0 RW, y_start
#define VIU2_OSD1_BLK0_CFG_W2                      ((0x1e1d  << 2) + 0xff900000)
#define VIU2_OSD1_BLK1_CFG_W2                      ((0x1e21  << 2) + 0xff900000)
#define VIU2_OSD1_BLK2_CFG_W2                      ((0x1e25  << 2) + 0xff900000)
#define VIU2_OSD1_BLK3_CFG_W2                      ((0x1e29  << 2) + 0xff900000)
// Bit 31:28 Reserved
// Bit 27:16 RW, h_end
// Bit 15:12 Reserved
// Bit 11: 0 RW, h_start
#define VIU2_OSD1_BLK0_CFG_W3                      ((0x1e1e  << 2) + 0xff900000)
#define VIU2_OSD1_BLK1_CFG_W3                      ((0x1e22  << 2) + 0xff900000)
#define VIU2_OSD1_BLK2_CFG_W3                      ((0x1e26  << 2) + 0xff900000)
#define VIU2_OSD1_BLK3_CFG_W3                      ((0x1e2a  << 2) + 0xff900000)
// Bit 31:28 Reserved
// Bit 27:16 RW, v_end
// Bit 15:12 Reserved
// Bit 11: 0 RW, v_start
#define VIU2_OSD1_BLK0_CFG_W4                      ((0x1e13  << 2) + 0xff900000)
#define VIU2_OSD1_BLK1_CFG_W4                      ((0x1e14  << 2) + 0xff900000)
#define VIU2_OSD1_BLK2_CFG_W4                      ((0x1e15  << 2) + 0xff900000)
#define VIU2_OSD1_BLK3_CFG_W4                      ((0x1e16  << 2) + 0xff900000)
// Bit    31 RW, burst_len_sel[2] of [2:0]
// Bit    30 RW, byte_swap: In addition to endian control, further define
//               whether to swap upper and lower byte within a 16-bit mem word.
//               0=No swap; 1=Swap data[15:0] to be {data[7:0], data[15:8]}
// Bit    29 RW, div_swap : swap the 2 64bits words in 128 bit word
// Bit 28:24 RW, fifo_lim : when osd fifo is small than the fifo_lim*16, closed the rq port of osd_rd_mif
// Bit 23:22 RW, fifo_ctrl: 00 : for 1 word in 1 burst , 01 : for  2words in 1burst, 10: for 4words in 1burst, 11: reserved
// Bit 21:20 R,  fifo_st. 0=IDLE, 1=FILL, 2=ABORT
// Bit    19 R,  fifo_overflow
//
// Bit 18:12 RW, fifo_depth_val, max value=64: set actual fifo depth to fifo_depth_val*8.
// Bit 11:10 RW, burst_len_sel[1:0] of [2:0]. 0=24(default), 1=32, 2=48, 3=64, 4=96, 5=128.
// Bit  9: 5 RW, hold_fifo_lines[4:0]
// Bit     4 RW, clear_err: one pulse to clear fifo_overflow
// Bit     3 RW, fifo_sync_rst
// Bit  2: 1 RW, endian
// Bit     0 RW, urgent
#define VIU2_OSD1_FIFO_CTRL_STAT                   ((0x1e2b  << 2) + 0xff900000)
// Bit 31:24 R, Y or R
// Bit 23:16 R, Cb or G
// Bit 15: 8 R, Cr or B
// Bit  7: 0 R, Output Alpha[8:1]
#define VIU2_OSD1_TEST_RDDATA                      ((0x1e2c  << 2) + 0xff900000)
// Bit    15 RW, prot_en: 1=Borrow PROT's FIFO storage, either for rotate or non-rotate.
// Bit 12: 0 RW, effective FIFO size when prot_en=1.
#define VIU2_OSD1_PROT_CTRL                        ((0x1e2e  << 2) + 0xff900000)
//------------------------------------------------------------------------------
// OSD2 registers
//------------------------------------------------------------------------------
// Bit    31 Reserved
// Bit    30 RW, enable_free_clk: 1=use free-running clock to drive logics;
//                                0=use gated clock for low power.
// Bit    29 R, test_rd_dsr
// Bit    28 R, osd_done
// Bit 27:24 R, osd_blk_mode
// Bit 23:22 R, osd_blk_ptr
// Bit    21 R, osd_enable
//
// Bit 20:12 RW, global_alpha
// Bit    11 RW, test_rd_en
// Bit    10 RW, hl2_en
// Bit     9 RW, hl1_en
// Bit  8: 5 RW, ctrl_mtch_y
// Bit     4 RW, ctrl_422to444
// Bit  3: 0 RW, osd_blk_enable. Bit 0 to enable block 0: 1=enable, 0=disable;
//                               Bit 1 to enable block 1, and so on.
#define VIU2_OSD2_CTRL_STAT                        ((0x1e30  << 2) + 0xff900000)
// Bit 31:26 Reserved
// Bit 25:16 R, fifo_count
// Bit 15: 6 Reserved
// Bit  5: 4 RW, hold_fifo_lines[6:5]
// Bit     3 RW, rgb2yuv_full_range
// Bit     2 RW, alpha_9b_mode
// Bit     1 RW, reserved
// Bit     0 RW, color_expand_mode
#define VIU2_OSD2_CTRL_STAT2                       ((0x1e4d  << 2) + 0xff900000)
// Bit 31: 9 Reserved
// Bit     8 RW, 0 = Write LUT, 1 = Read LUT
// Bit  7: 0 RW, lut_addr
#define VIU2_OSD2_COLOR_ADDR                       ((0x1e31  << 2) + 0xff900000)
// Bit 31:24 RW, Y or R
// Bit 23:16 RW, Cb or G
// Bit 15: 8 RW, Cr or B
// Bit  7: 0 RW, Alpha
#define VIU2_OSD2_COLOR                            ((0x1e32  << 2) + 0xff900000)
// Bit 31:28 Reserved
// Bit 27:16 RW, hl[1-2]_h/v_start
// Bit 15:12 Reserved
// Bit 11: 0 RW, hl[1-2]_h/v_end
#define VIU2_OSD2_HL1_H_START_END                  ((0x1e33  << 2) + 0xff900000)
#define VIU2_OSD2_HL1_V_START_END                  ((0x1e34  << 2) + 0xff900000)
#define VIU2_OSD2_HL2_H_START_END                  ((0x1e35  << 2) + 0xff900000)
#define VIU2_OSD2_HL2_V_START_END                  ((0x1e36  << 2) + 0xff900000)
// Bit 31:24 RW, Y or R
// Bit 23:16 RW, Cb or G
// Bit 15: 8 RW, Cr or B
// Bit  7: 0 RW, Alpha
#define VIU2_OSD2_TCOLOR_AG0                       ((0x1e37  << 2) + 0xff900000)
#define VIU2_OSD2_TCOLOR_AG1                       ((0x1e38  << 2) + 0xff900000)
#define VIU2_OSD2_TCOLOR_AG2                       ((0x1e39  << 2) + 0xff900000)
#define VIU2_OSD2_TCOLOR_AG3                       ((0x1e3a  << 2) + 0xff900000)
// Bit 31:24 Reserved
// Bit 23:16 RW, tbl_addr
// Bit    15 RW, little_endian: 0=big endian, 1=little endian
// Bit    14 RW, rpt_y
// Bit 13:12 RW, interp_ctrl. 0x=No interpolation; 10=Interpolate with previous
//                            pixel; 11=Interpolate with the average value
//                            between previous and next pixel.
// Bit 11: 8 RW, osd_blk_mode
// Bit     7 RW, rgb_en
// Bit     6 RW, tc_alpha_en
// Bit  5: 2 RW, color_matrix
// Bit     1 RW, interlace_en
// Bit     0 RW, interlace_sel_odd
#define VIU2_OSD2_BLK0_CFG_W0                      ((0x1e3b  << 2) + 0xff900000)
#define VIU2_OSD2_BLK1_CFG_W0                      ((0x1e3f  << 2) + 0xff900000)
#define VIU2_OSD2_BLK2_CFG_W0                      ((0x1e43  << 2) + 0xff900000)
#define VIU2_OSD2_BLK3_CFG_W0                      ((0x1e47  << 2) + 0xff900000)
// Bit 31:29 Reserved
// Bit 28:16 RW, x_end
// Bit 15:13 Reserved
// Bit 12: 0 RW, x_start
#define VIU2_OSD2_BLK0_CFG_W1                      ((0x1e3c  << 2) + 0xff900000)
#define VIU2_OSD2_BLK1_CFG_W1                      ((0x1e40  << 2) + 0xff900000)
#define VIU2_OSD2_BLK2_CFG_W1                      ((0x1e44  << 2) + 0xff900000)
#define VIU2_OSD2_BLK3_CFG_W1                      ((0x1e48  << 2) + 0xff900000)
// Bit 31:29 Reserved
// Bit 28:16 RW, y_end
// Bit 15:13 Reserved
// Bit 12: 0 RW, y_start
#define VIU2_OSD2_BLK0_CFG_W2                      ((0x1e3d  << 2) + 0xff900000)
#define VIU2_OSD2_BLK1_CFG_W2                      ((0x1e41  << 2) + 0xff900000)
#define VIU2_OSD2_BLK2_CFG_W2                      ((0x1e45  << 2) + 0xff900000)
#define VIU2_OSD2_BLK3_CFG_W2                      ((0x1e49  << 2) + 0xff900000)
// Bit 31:28 Reserved
// Bit 27:16 RW, h_end
// Bit 15:12 Reserved
// Bit 11: 0 RW, h_start
#define VIU2_OSD2_BLK0_CFG_W3                      ((0x1e3e  << 2) + 0xff900000)
#define VIU2_OSD2_BLK1_CFG_W3                      ((0x1e42  << 2) + 0xff900000)
#define VIU2_OSD2_BLK2_CFG_W3                      ((0x1e46  << 2) + 0xff900000)
#define VIU2_OSD2_BLK3_CFG_W3                      ((0x1e4a  << 2) + 0xff900000)
// Bit 31:28 Reserved
// Bit 27:16 RW, v_end
// Bit 15:12 Reserved
// Bit 11: 0 RW, v_start
#define VIU2_OSD2_BLK0_CFG_W4                      ((0x1e64  << 2) + 0xff900000)
#define VIU2_OSD2_BLK1_CFG_W4                      ((0x1e65  << 2) + 0xff900000)
#define VIU2_OSD2_BLK2_CFG_W4                      ((0x1e66  << 2) + 0xff900000)
#define VIU2_OSD2_BLK3_CFG_W4                      ((0x1e67  << 2) + 0xff900000)
// Bit    31 RW, burst_len_sel[2] of [2:0]
// Bit    30 RW, byte_swap: In addition to endian control, further define
//               whether to swap upper and lower byte within a 16-bit mem word.
//               0=No swap; 1=Swap data[15:0] to be {data[7:0], data[15:8]}
// Bit    29 RW, div_swap : swap the 2 64bits words in 128 bit word
// Bit 28:24 RW, fifo_lim : when osd fifo is small than the fifo_lim*16, closed the rq port of osd_rd_mif
// Bit 23:22 RW, fifo_ctrl: 00 : for 1 word in 1 burst , 01 : for  2words in 1burst, 10: for 4words in 1burst, 11: reserved
// Bit 21:20 R,  fifo_st. 0=IDLE, 1=FILL, 2=ABORT
// Bit    19 R,  fifo_overflow
// Bit 18:12 RW, fifo_depth_val, max value=64: set actual fifo depth to fifo_depth_val*8.
// Bit 11:10 RW, burst_len_sel[1:0] of [2:0]. 0=24(default), 1=32, 2=48, 3=64, 4=96, 5=128.
// Bit  9: 5 RW, hold_fifo_lines[4:0]
// Bit     4 RW, clear_err: one pulse to clear fifo_overflow
// Bit     3 RW, fifo_sync_rst
// Bit  2: 1 RW, endian
// Bit     0 RW, urgent
#define VIU2_OSD2_FIFO_CTRL_STAT                   ((0x1e4b  << 2) + 0xff900000)
// Bit 31:24 R, Y or R
// Bit 23:16 R, Cb or G
// Bit 15: 8 R, Cr or B
// Bit  7: 0 R, Output Alpha[8:1]
#define VIU2_OSD2_TEST_RDDATA                      ((0x1e4c  << 2) + 0xff900000)
// Bit    15 RW, prot_en: 1=Borrow PROT's FIFO storage, either for rotate or non-rotate.
// Bit 12: 0 RW, effective FIFO size when prot_en=1.
#define VIU2_OSD2_PROT_CTRL                        ((0x1e4e  << 2) + 0xff900000)
//------------------------------------------------------------------------------
// VD1 path
//------------------------------------------------------------------------------
#define VIU2_VD1_IF0_GEN_REG                       ((0x1e50  << 2) + 0xff900000)
#define VIU2_VD1_IF0_CANVAS0                       ((0x1e51  << 2) + 0xff900000)
#define VIU2_VD1_IF0_CANVAS1                       ((0x1e52  << 2) + 0xff900000)
#define VIU2_VD1_IF0_LUMA_X0                       ((0x1e53  << 2) + 0xff900000)
#define VIU2_VD1_IF0_LUMA_Y0                       ((0x1e54  << 2) + 0xff900000)
#define VIU2_VD1_IF0_CHROMA_X0                     ((0x1e55  << 2) + 0xff900000)
#define VIU2_VD1_IF0_CHROMA_Y0                     ((0x1e56  << 2) + 0xff900000)
#define VIU2_VD1_IF0_LUMA_X1                       ((0x1e57  << 2) + 0xff900000)
#define VIU2_VD1_IF0_LUMA_Y1                       ((0x1e58  << 2) + 0xff900000)
#define VIU2_VD1_IF0_CHROMA_X1                     ((0x1e59  << 2) + 0xff900000)
#define VIU2_VD1_IF0_CHROMA_Y1                     ((0x1e5a  << 2) + 0xff900000)
#define VIU2_VD1_IF0_RPT_LOOP                      ((0x1e5b  << 2) + 0xff900000)
#define VIU2_VD1_IF0_LUMA0_RPT_PAT                 ((0x1e5c  << 2) + 0xff900000)
#define VIU2_VD1_IF0_CHROMA0_RPT_PAT               ((0x1e5d  << 2) + 0xff900000)
#define VIU2_VD1_IF0_LUMA1_RPT_PAT                 ((0x1e5e  << 2) + 0xff900000)
#define VIU2_VD1_IF0_CHROMA1_RPT_PAT               ((0x1e5f  << 2) + 0xff900000)
#define VIU2_VD1_IF0_LUMA_PSEL                     ((0x1e60  << 2) + 0xff900000)
#define VIU2_VD1_IF0_CHROMA_PSEL                   ((0x1e61  << 2) + 0xff900000)
#define VIU2_VD1_IF0_DUMMY_PIXEL                   ((0x1e62  << 2) + 0xff900000)
#define VIU2_VD1_IF0_LUMA_FIFO_SIZE                ((0x1e63  << 2) + 0xff900000)
#define VIU2_VD1_IF0_RANGE_MAP_Y                   ((0x1e6a  << 2) + 0xff900000)
#define VIU2_VD1_IF0_RANGE_MAP_CB                  ((0x1e6b  << 2) + 0xff900000)
#define VIU2_VD1_IF0_RANGE_MAP_CR                  ((0x1e6c  << 2) + 0xff900000)
#define VIU2_VD1_IF0_GEN_REG2                      ((0x1e6d  << 2) + 0xff900000)
#define VIU2_VD1_IF0_PROT_CNTL                     ((0x1e6e  << 2) + 0xff900000)
#define VIU2_VD1_IF0_URGENT_CTRL                   ((0x1e6f  << 2) + 0xff900000)
//Bit 31    it true, disable clock, otherwise enable clock
//Bit 30    soft rst bit
//Bit 28    if true, horizontal formatter use repeating to generete pixel, otherwise use bilinear interpolation
//Bit 27:24 horizontal formatter initial phase
//Bit 23    horizontal formatter repeat pixel 0 enable
//Bit 22:21 horizontal Y/C ratio, 00: 1:1, 01: 2:1, 10: 4:1
//Bit 20    horizontal formatter enable
//Bit 19    if true, always use phase0 while vertical formater, meaning always
//          repeat data, no interpolation
//Bit 18    if true, disable vertical formatter chroma repeat last line
//Bit 17    veritcal formatter dont need repeat line on phase0, 1: enable, 0: disable
//Bit 16    veritcal formatter repeat line 0 enable
//Bit 15:12 vertical formatter skip line num at the beginning
//Bit 11:8  vertical formatter initial phase
//Bit 7:1   vertical formatter phase step (3.4)
//Bit 0     vertical formatter enable
#define VIU2_VD1_FMT_CTRL                          ((0x1e68  << 2) + 0xff900000)
//Bit 27:16  horizontal formatter width
//Bit 11:0   vertical formatter width
#define VIU2_VD1_FMT_W                             ((0x1e69  << 2) + 0xff900000)
#define VIU2_VD1_IF0_GEN_REG3                      ((0x1e70  << 2) + 0xff900000)
//bit 31:1,  reversed
//bit 0,     cntl_64bit_rev
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  v2regs.h
//
//`define VIUB_VCBUS_BASE                8'h20
//
// Reading file:  vregs_clk1.h
//
//===========================================================================
// Video Interface Registers    0xa00 - 0xaff
//===========================================================================
// -----------------------------------------------
// CBUS_BASE:  VIUB_VCBUS_BASE = 0x20
// -----------------------------------------------
#define VIUB_ADDR_START                            ((0x2000  << 2) + 0xff900000)
#define VIUB_ADDR_END                              ((0x20ff  << 2) + 0xff900000)
//`define TRACE_REG 8'ff
//------------------------------------------------------------------------------
// VIU top-level registers
//------------------------------------------------------------------------------
// Bit  0 RW, osd1_reset
// Bit  1 RW, osd2_reset
// Bit  2 RW, vd1_reset
// Bit  3 RW, vd1_fmt_reset
// Bit  4 RW, vd2_reset
// Bit  5 RW, vd2_fmt_reset
// Bit  6 RW, di_dsr1to2_reset
// Bit  7 RW, vpp_reset
// Bit  8 RW, di_if1_reset
// Bit  9 RW, di_if1_fmt_reset
// Bit 10 RW, di_inp_reset
// Bit 11 RW, di_inp_fmt_reset
// Bit 12 RW, di_mem_reset
// Bit 13 RW, di_mem_fmt_reset
// Bit 14 RW, di_nr_wr_mif_reset
// Bit 15 RW, dein_wr_mif_reset
// Bit 16 RW, di_chan2_mif_reset
// Bit 17 RW, di_mtn_wr_mif_reset
// Bit 18 RW, di_mtn_rd_mif_reset
// Bit 19 RW, di_mad_reset
// Bit 20 RW, vdin0_reset
// Bit 21 RW, vdin1_reset
// Bit 22 RW, nrin_mux_reset
// Bit 23 RW, vdin0_wr_reset
// Bit 24 RW, vdin1_wr_reset
// Bit 25 RW, reserved
// Bit 26 RW, d2d3_reset
// Bit 27 RW, di_cont_wr_mif_reset
// Bit 28 RW, di_cont_rd_mif_reset
#define VIUB_SW_RESET                              ((0x2001  << 2) + 0xff900000)
#define VIUB_SW_RESET0                             ((0x2002  << 2) + 0xff900000)
// Bit 0 RW, software reset for mcvecrd_mif
// Bit 1 RW, software reset for mcinfowr_mif
// Bit 2 RW, software reset for mcinford_mif
//bit 8 if true, vsync interrup is generate only field == 0
//bit 7:0 fix_disable
#define VIUB_MISC_CTRL0                            ((0x2006  << 2) + 0xff900000)
#define VIUB_GCLK_CTRL0                            ((0x2007  << 2) + 0xff900000)
//// gclk_ctrl0_gl[ 0] : def=1 di_top_wrap clk enable
////
//// gclk_ctrl0_gl[ 8] : def=0 mad pre clock enable, from mad clock
//// gclk_ctrl0_gl[ 9] : def=0 mad post clock enable, from mad clock
//// gclk_ctrl0_gl[10] : def=0 div clock enable, di slow clock including di&mcdi
//// gclk_ctrl0_gl[11] : def=0 mcdi clock enable, from div clock
//// gclk_ctrl0_gl[12] : def=0 di post clock enable, from div clock
//// gclk_ctrl0_gl[13] : def=0 reserved
//// gclk_ctrl0_gl[14] : def=1 di_no_clk_gate, for old di
//// gclk_ctrl0_gl[15] : def=0 di_gate_all, for old di
#define VIUB_GCLK_CTRL1                            ((0x2008  << 2) + 0xff900000)
//// gclk_ctrl1_gl[ 1: 0] : def=2'b00 mif-sub-arb clock gate ctrl [1]: clock valid, [0]: clock close
//// gclk_ctrl1_gl[ 3: 2] : def=2'b00 if1 rdmif clock gate ctrl [1]: clock valid, [0]: clock close
//// gclk_ctrl1_gl[ 5: 4] : def=2'b00 if2 rdmif clock gate ctrl [1]: clock valid, [0]: clock close
//// gclk_ctrl1_gl[ 7: 6] : def=2'b00 de wrmif clock gate ctrl [1]: clock valid, [0]: clock close
//// gclk_ctrl1_gl[ 9: 8] : def=2'b00 mtnrd post mif clock gate ctrl [1]: clock valid, [0]: clock close
//// gclk_ctrl1_gl[11:10] : def=2'b00 mcdi post mif clock gate ctrl [1]: clock valid, [0]: clock close
//// gclk_ctrl1_gl[17:16] : def=2'b00 inp rdmif clock gate ctrl [1]: clock valid, [0]: clock close
//// gclk_ctrl1_gl[19:18] : def=2'b00 mem rdmif clock gate ctrl [1]: clock valid, [0]: clock close
//// gclk_ctrl1_gl[21:20] : def=2'b00 chan rdmif clock gate ctrl [1]: clock valid, [0]: clock close
//// gclk_ctrl1_gl[23:22] : def=2'b00 nr wrmif clock gate ctrl [1]: clock valid, [0]: clock close
//// gclk_ctrl1_gl[25:24] : def=2'b00 mtn mif clock gate ctrl [1]: clock valid, [0]: clock close
//// gclk_ctrl1_gl[27:26] : def=2'b00 mcdi pre mif clock gate ctrl [1]: clock valid, [0]: clock close
////
#define VIUB_GCLK_CTRL2                            ((0x2009  << 2) + 0xff900000)
//// gclk_ctrl_pre[ 1: 0] : def=2'b00 nr clock gate ctrl [1]: clock valid, [0]: clock close
//// gclk_ctrl_pre[ 3: 2] : def=2'b00 pd clock gate ctrl [1]: clock valid, [0]: clock close
//// gclk_ctrl_pre[ 5: 4] : def=2'b00 mtn det clock gate ctrl [1]: clock valid, [0]: clock close
//// gclk_ctrl_pre[ 7: 6] : def=2'b00 debanding clock gate ctrl [1]: clock valid, [0]: clock close
//// gclk_ctrl_pre[ 9: 8] : def=2'b00 dnr clock gate ctrl [1]: clock valid, [0]: clock close
//// gclk_ctrl_pre[11:10] : def=2'b00 nr&dnr blend clock gate ctrl [1]: clock valid, [0]: clock close
//// gclk_ctrl_pre[13:12] : def=2'b00 mcdi clock gate ctrl [1]: clock valid, [0]: clock close
#define VIUB_GCLK_CTRL3                            ((0x200a  << 2) + 0xff900000)
//// gclk_ctrl_post[ 1: 0] : def=2'b00 di blend clock gate ctrl [1]: clock valid, [0]: clock close
//// gclk_ctrl_post[ 3: 2] : def=2'b00 ei clock gate ctrl [1]: clock valid, [0]: clock close
//// gclk_ctrl_post[ 5: 4] : def=2'b00 ei_0 clock gate ctrl [1]: clock valid, [0]: clock close
#define DI_IF2_GEN_REG                             ((0x2010  << 2) + 0xff900000)
#define DI_IF2_CANVAS0                             ((0x2011  << 2) + 0xff900000)
#define DI_IF2_LUMA_X0                             ((0x2012  << 2) + 0xff900000)
#define DI_IF2_LUMA_Y0                             ((0x2013  << 2) + 0xff900000)
#define DI_IF2_CHROMA_X0                           ((0x2014  << 2) + 0xff900000)
#define DI_IF2_CHROMA_Y0                           ((0x2015  << 2) + 0xff900000)
#define DI_IF2_RPT_LOOP                            ((0x2016  << 2) + 0xff900000)
#define DI_IF2_LUMA0_RPT_PAT                       ((0x2017  << 2) + 0xff900000)
#define DI_IF2_CHROMA0_RPT_PAT                     ((0x2018  << 2) + 0xff900000)
#define DI_IF2_DUMMY_PIXEL                         ((0x2019  << 2) + 0xff900000)
#define DI_IF2_LUMA_FIFO_SIZE                      ((0x201a  << 2) + 0xff900000)
#define DI_IF2_RANGE_MAP_Y                         ((0x201b  << 2) + 0xff900000)
#define DI_IF2_RANGE_MAP_CB                        ((0x201c  << 2) + 0xff900000)
#define DI_IF2_RANGE_MAP_CR                        ((0x201d  << 2) + 0xff900000)
#define DI_IF2_GEN_REG2                            ((0x201e  << 2) + 0xff900000)
#define DI_IF2_FMT_CTRL                            ((0x201f  << 2) + 0xff900000)
#define DI_IF2_FMT_W                               ((0x2020  << 2) + 0xff900000)
#define DI_IF2_URGENT_CTRL                         ((0x2021  << 2) + 0xff900000)
//bit15, auto enable; bit14, canvas write mode ;7:4, high threshold ;3:0 , low threshold  for di inp chroma path
//bit31, auto enable; bit30, canvas write mode ;23:20, high threshold ;19:16 , low threshold  for di inp luma path
#define DI_IF2_GEN_REG3                            ((0x2022  << 2) + 0xff900000)
//bit 31:1,  reversed
//bit 0,     cntl_64bit_rev
#define DI_IF1_URGENT_CTRL                         ((0x20a3  << 2) + 0xff900000)
//bit15, auto enable; bit14, canvas write mode ;7:4, high threshold ;3:0 , low threshold  for di inp chroma path
//bit31, auto enable; bit30, canvas write mode ;23:20, high threshold ;19:16 , low threshold  for di inp luma path
#define DI_INP_URGENT_CTRL                         ((0x20a4  << 2) + 0xff900000)
//bit15, auto enable; bit14, canvas write mode ;7:4, high threshold ;3:0 , low threshold  for di mem chroma path
//bit31, auto enable; bit30, canvas write mode ;23:20, high threshold ;19:16 , low threshold  for di mem luma path
#define DI_MEM_URGENT_CTRL                         ((0x20a5  << 2) + 0xff900000)
//bit15, auto enable; bit14, canvas write mode ;7:4, high threshold ;3:0 , low threshold  for di chan2 chroma path
//bit31, auto enable; bit30, canvas write mode ;23:20, high threshold ;19:16 , low threshold  for di chan2 luma path
#define DI_CHAN2_URGENT_CTRL                       ((0x20a6  << 2) + 0xff900000)
#define DI_IF1_GEN_REG3                            ((0x20a7  << 2) + 0xff900000)
//bit 31:1,  reversed
//bit 0,     cntl_64bit_rev
#define DI_INP_GEN_REG3                            ((0x20a8  << 2) + 0xff900000)
//bit 31:1,  reversed
//bit 0,     cntl_64bit_rev
#define DI_MEM_GEN_REG3                            ((0x20a9  << 2) + 0xff900000)
//bit 31:1,  reversed
//bit 0,     cntl_64bit_rev
#define DI_CHAN2_GEN_REG3                          ((0x20aa  << 2) + 0xff900000)
//bit 31:1,  reversed
//bit 0,     cntl_64bit_rev
//
// Closing file:  vregs_clk1.h
//
//======================================================================
//   vpu  register.
//======================================================================
// -----------------------------------------------
// CBUS_BASE:  VPU_VCBUS_BASE = 0x27
// -----------------------------------------------
#define VPU_OSD1_MMC_CTRL                          ((0x2701  << 2) + 0xff900000)
#define VPU_OSD2_MMC_CTRL                          ((0x2702  << 2) + 0xff900000)
#define VPU_VD1_MMC_CTRL                           ((0x2703  << 2) + 0xff900000)
#define VPU_VD2_MMC_CTRL                           ((0x2704  << 2) + 0xff900000)
#define VPU_DI_IF1_MMC_CTRL                        ((0x2705  << 2) + 0xff900000)
#define VPU_DI_MEM_MMC_CTRL                        ((0x2706  << 2) + 0xff900000)
#define VPU_DI_INP_MMC_CTRL                        ((0x2707  << 2) + 0xff900000)
#define VPU_DI_MTNRD_MMC_CTRL                      ((0x2708  << 2) + 0xff900000)
#define VPU_DI_CHAN2_MMC_CTRL                      ((0x2709  << 2) + 0xff900000)
#define VPU_DI_MTNWR_MMC_CTRL                      ((0x270a  << 2) + 0xff900000)
#define VPU_DI_NRWR_MMC_CTRL                       ((0x270b  << 2) + 0xff900000)
#define VPU_DI_DIWR_MMC_CTRL                       ((0x270c  << 2) + 0xff900000)
#define VPU_VDIN0_MMC_CTRL                         ((0x270d  << 2) + 0xff900000)
#define VPU_VDIN1_MMC_CTRL                         ((0x270e  << 2) + 0xff900000)
#define VPU_BT656_MMC_CTRL                         ((0x270f  << 2) + 0xff900000)
#define VPU_TVD3D_MMC_CTRL                         ((0x2710  << 2) + 0xff900000)
#define VPU_TVDVBI_MMC_CTRL                        ((0x2711  << 2) + 0xff900000)
//Read only
//`define     VPU_TVDVBI_VSLATCH_ADDR   8'h12
//Read only
//`define     VPU_TVDVBI_WRRSP_ADDR 8'h13
#define VPU_VDIN_PRE_ARB_CTRL                      ((0x2714  << 2) + 0xff900000)
#define VPU_VDISP_PRE_ARB_CTRL                     ((0x2715  << 2) + 0xff900000)
#define VPU_VPUARB2_PRE_ARB_CTRL                   ((0x2716  << 2) + 0xff900000)
#define VPU_OSD3_MMC_CTRL                          ((0x2717  << 2) + 0xff900000)
#define VPU_OSD4_MMC_CTRL                          ((0x2718  << 2) + 0xff900000)
#define VPU_VD3_MMC_CTRL                           ((0x2719  << 2) + 0xff900000)
// [31:11] Reserved.
// [10: 8] cntl_viu_vdin_sel_data. Select VIU to VDIN data path, must clear it first before changing the path selection:
//          3'b000=Disable VIU to VDIN path;
//          3'b001=Enable VIU of ENC_I domain to VDIN;
//          3'b010=Enable VIU of ENC_P domain to VDIN;
//          3'b100=Enable VIU of ENC_T domain to VDIN;
// [ 6: 4] cntl_viu_vdin_sel_clk. Select which clock to VDIN path, must clear it first before changing the clock:
//          3'b000=Disable VIU to VDIN clock;
//          3'b001=Select encI clock to VDIN;
//          3'b010=Select encP clock to VDIN;
//          3'b100=Select encT clock to VDIN;
// [ 3: 2] cntl_viu2_sel_venc. Select which one of the encI/P/T that VIU2 connects to:
//         0=No connection, 1=ENCI, 2=ENCP, 3=ENCT.
// [ 1: 0] cntl_viu1_sel_venc. Select which one of the encI/P/T that VIU1 connects to:
//         0=No connection, 1=ENCI, 2=ENCP, 3=ENCT.
#define VPU_VIU_VENC_MUX_CTRL                      ((0x271a  << 2) + 0xff900000)
// [15:12] rd_rate. 0=A read every clk2; 1=A read every 2 clk2; ...; 15=A read every 16 clk2.
// [11: 8] wr_rate. 0=A write every clk1; 1=A write every 2 clk1; ...; 15=A write every 16 clk1.
// [ 7: 5] data_comp_map. Input data is CrYCb(BRG), map the output data to desired format:
//                          0=output CrYCb(BRG);
//                          1=output YCbCr(RGB);
//                          2=output YCrCb(RBG);
//                          3=output CbCrY(GBR);
//                          4=output CbYCr(GRB);
//                          5=output CrCbY(BGR);
//                          6,7=Rsrv.
// [    4] inv_dvi_clk. 1=Invert clock to external DVI, (clock invertion exists at internal HDMI).
// [    3] inv_vsync. 1=Invert Vsync polarity.
// [    2] inv_hsync. 1=Invert Hsync polarity.
// [ 1: 0] src_sel. 0=Disable output to HDMI; 1=Select VENC_I output to HDMI; 2=Select VENC_P output.
#define VPU_HDMI_SETTING                           ((0x271b  << 2) + 0xff900000)
#define ENCI_INFO_READ                             ((0x271c  << 2) + 0xff900000)
#define ENCP_INFO_READ                             ((0x271d  << 2) + 0xff900000)
#define ENCT_INFO_READ                             ((0x271e  << 2) + 0xff900000)
#define ENCL_INFO_READ                             ((0x271f  << 2) + 0xff900000)
// Bit  0 RW, viu_rst_n
// Bit  1 RW, vdin_mmc_arb_rst_n
// Bit  2 RW, vdisp_mmc_arb_rst_n
// Bit  3 RW, vpuarb2_mmc_arb_rst_n
#define VPU_SW_RESET                               ((0x2720  << 2) + 0xff900000)
//Bit 30     d2d3_depr_req_sel,  0:vdisp_pre_arb, 1: vpuarb2_pre_arb
//Bit 27:22  d2d3_depr_brst_num
//Bit 21:16  d2d3_depr_id
//Bit 14     d2d3_depw_req_sel, 0: vdin_pre_arb, 1: vdisp_pre_arb
//Bit 11:6   d2d3_depw_brst_num
//Bit 5:0    d2d3_depw_id
#define VPU_D2D3_MMC_CTRL                          ((0x2721  << 2) + 0xff900000)
//Bit 30     mtn_contrd_req_pre,  0:disp1_arb, 1: vdin_pre_arb
//Bit 27:22  mtn_contrd_brst_num
//Bit 21:16  mtn_contrd_id
//Bit 14     mtn_contwr_req_pre, 0: vdisp1_arb, 1: vdin_pre_arb
//Bit 11:6   mtn_contwr_brst_num
//Bit 5:0    mtn_contwr_id
#define VPU_CONT_MMC_CTRL                          ((0x2722  << 2) + 0xff900000)
// Bit  6 RW, gclk_mpeg_vpu_misc
// Bit  5 RW, gclk_mpeg_venc_l_top
// Bit  4 RW, gclk_mpeg_vencl_int
// Bit  3 RW, gclk_mpeg_vencp_int
// Bit  2 RW, gclk_mpeg_vi2_top
// Bit  1 RW, gclk_mpeg_vi_top
// Bit  0 RW, gclk_mpeg_venc_p_top
#define VPU_CLK_GATE                               ((0x2723  << 2) + 0xff900000)
//Bit    12 RW, rdma_pre
//Bit 11: 6 RW, rdma_num
//Bit  5: 0 RW, rdma_id
#define VPU_RDMA_MMC_CTRL                          ((0x2724  << 2) + 0xff900000)
#define VPU_MEM_PD_REG0                            ((0x2725  << 2) + 0xff900000)
#define VPU_MEM_PD_REG1                            ((0x2726  << 2) + 0xff900000)
// [   31] hdmi_data_ovr_en: 1=Enable overriding data input to HDMI TX with hdmi_data_ovr[29:0]. 0=No override. Default 0.
// [   30] Reserved.                                                                                            Default 0
// [29: 0] hdmi_data_ovr.                                                                                       Default 0.
#define VPU_HDMI_DATA_OVR                          ((0x2727  << 2) + 0xff900000)
//Bit    15 RW, prot1_sel_osd4
//Bit    14 RW, prot1_sel_osd3
//Bit    13 RW, prot1_sel_osd2
//Bit    12 RW, prot1_sel_osd1
//Bit 11: 6 RW, prot1_brst_num
//Bit  5: 0 RW, prot1_id
#define VPU_PROT1_MMC_CTRL                         ((0x2728  << 2) + 0xff900000)
//Bit    14 RW, prot2_sel_vd3
//Bit    13 RW, prot2_sel_vd2
//Bit    12 RW, prot2_sel_vd1
//Bit 11: 6 RW, prot2_brst_num
//Bit  5: 0 RW, prot2_id
#define VPU_PROT2_MMC_CTRL                         ((0x2729  << 2) + 0xff900000)
//Bit    14 RW, prot3_sel_vd3
//Bit    13 RW, prot3_sel_vd2
//Bit    12 RW, prot3_sel_vd1
//Bit 11: 6 RW, prot3_brst_num
//Bit  5: 0 RW, prot3_id
#define VPU_PROT3_MMC_CTRL                         ((0x272a  << 2) + 0xff900000)
//Bit 29:24 RW, s3_brst_num
//Bit 21:16 RW, s2_brst_num
//Bit 13: 8 RW, s1_brst_num
//Bit  5: 0 RW, s0_brst_num
#define VPU_ARB4_V1_MMC_CTRL                       ((0x272b  << 2) + 0xff900000)
//Bit 29:24 RW, s3_brst_num
//Bit 21:16 RW, s2_brst_num
//Bit 13: 8 RW, s1_brst_num
//Bit  5: 0 RW, s0_brst_num
#define VPU_ARB4_V2_MMC_CTRL                       ((0x272c  << 2) + 0xff900000)
//Bit 27:22 RW, mcvecwr_num
//Bit 21:16 RW, mcvecwr_id
//Bit 11:6  RW, mcvecrd_num
//Bit 5:0   RW, mcvecrd_id
#define VPU_MCVEC_MMC_CTRL                         ((0x272d  << 2) + 0xff900000)
//Bit 27:22 RW, mcinfwr_num
//Bit 21:16 RW, mcinfwr_id
//Bit 11:6  RW, mcinfrd_num
//Bit 5:0   RW, mcinfrd_id
#define VPU_MCINF_MMC_CTRL                         ((0x272e  << 2) + 0xff900000)
//Bit 31    reg_vpu_pwm_inv, 1: invert the pwm signal, active low
//Bit 30:29 reg_vpu_pwm_src_sel, 00: encl, enct, encp
//Bit 28:16 reg_vpu_pwm_v_end0
//Bit 12:0  reg_vpu_pwm_v_start0
#define VPU_VPU_PWM_V0                             ((0x2730  << 2) + 0xff900000)
//Bit 28:16 reg_vpu_pwm_v_end1
//Bit 12:0  reg_vpu_pwm_v_start1
#define VPU_VPU_PWM_V1                             ((0x2731  << 2) + 0xff900000)
//Bit 28:16 reg_vpu_pwm_v_end2
//Bit 12:0  reg_vpu_pwm_v_start2
#define VPU_VPU_PWM_V2                             ((0x2732  << 2) + 0xff900000)
//Bit 28:16 reg_vpu_pwm_v_end3
//Bit 12:0  reg_vpu_pwm_v_start3
#define VPU_VPU_PWM_V3                             ((0x2733  << 2) + 0xff900000)
//Bit 28:16 reg_vpu_pwm_h_end0
//Bit 12:0  reg_vpu_pwm_h_start0
#define VPU_VPU_PWM_H0                             ((0x2734  << 2) + 0xff900000)
//Bit 28:16 reg_vpu_pwm_h_end1
//Bit 12:0  reg_vpu_pwm_h_start1
#define VPU_VPU_PWM_H1                             ((0x2735  << 2) + 0xff900000)
//Bit 28:16 reg_vpu_pwm_h_end2
//Bit 12:0  reg_vpu_pwm_h_start2
#define VPU_VPU_PWM_H2                             ((0x2736  << 2) + 0xff900000)
//Bit 28:16 reg_vpu_pwm_h_end3
//Bit 12:0  reg_vpu_pwm_h_start3
#define VPU_VPU_PWM_H3                             ((0x2737  << 2) + 0xff900000)
//Bit 18   reg_vpu_3d_go_high_fld_pol: 0: go high at field 0, 1: go high at field 1
//Bit 17   reg_vpu_3d_sync_setting_vsync_latch
//Bit 16   reg_vpu_3d_sync_enable
//Bit 14:8 reg_vpu_3d_sync_v_end
//Bit 6:0  reg_vpu_3d_sync_v_start
#define VPU_VPU_3D_SYNC1                           ((0x2738  << 2) + 0xff900000)
//Bit 28:16 reg_vpu_3d_sync_h_end
//Bit 12:0  reg_vpu_3d_sync_h_start
#define VPU_VPU_3D_SYNC2                           ((0x2739  << 2) + 0xff900000)
//Bit 4    csi2_pre, 1: using vpu pre arbiter0, 0: using vpu pre arbiter2
//Bit 2:1  isp_in_sel, 01: select bt656, 10: select Mipi CSI2, otherwise select nothing
//Bit 0,   if true, force vencl clk enable, otherwise, it might auto turn off by mipi DSI
#define VPU_MISC_CTRL                              ((0x2740  << 2) + 0xff900000)
#define VPU_ISP_GCLK_CTRL0                         ((0x2741  << 2) + 0xff900000)
#define VPU_ISP_GCLK_CTRL1                         ((0x2742  << 2) + 0xff900000)
#define VPU_HDMI_FMT_CTRL                          ((0x2743  << 2) + 0xff900000)
#define VPU_VDIN_ASYNC_HOLD_CTRL                   ((0x2744  << 2) + 0xff900000)
#define VPU_VDISP_ASYNC_HOLD_CTRL                  ((0x2745  << 2) + 0xff900000)
#define VPU_VPUARB2_ASYNC_HOLD_CTRL                ((0x2746  << 2) + 0xff900000)
//    arb0_rd_urg_ctrl_o <=  vpp_off_urg_ctrl &  vpu_arb_urg_ctrl[0] |
//                        rdma_ddr_req_busy_sync_d1 & vpu_arb_urg_ctrl[1]
//                        ;
//
//    arb1_rd_urg_ctrl_o <=  vpp_off_urg_ctrl &  vpu_arb_urg_ctrl[2] |
//                        rdma_ddr_req_busy_sync_d1 & vpu_arb_urg_ctrl[3]
//                        ;
//
//    arb2_rd_urg_ctrl_o <=  vpp_off_urg_ctrl &  vpu_arb_urg_ctrl[4] |
//                        rdma_ddr_req_busy_sync_d1 & vpu_arb_urg_ctrl[5]
//                        ;
//
//    arb0_wr_urg_ctrl_o <=  vdin0_lff_urg_ctrl_sync_d1 & vpu_arb_urg_ctrl[6] |
//                        vdin1_lff_urg_ctrl_sync_d1 & vpu_arb_urg_ctrl[7]
//                        ;
//
//    arb1_wr_urg_ctrl_o <=  vdin0_lff_urg_ctrl_sync_d1 & vpu_arb_urg_ctrl[8] |
//                        vdin1_lff_urg_ctrl_sync_d1 & vpu_arb_urg_ctrl[9]
//
#define VPU_ARB_URG_CTRL                           ((0x2747  << 2) + 0xff900000)
#define VPU_SECURE_DUMMY                           ((0x2748  << 2) + 0xff900000)
#define VPU_VENCL_DITH_EN                          ((0x2749  << 2) + 0xff900000)
// todo :
#define VPU_422TO444_RST                           ((0x274a  << 2) + 0xff900000)
// todo :
#define VPU_422TO444_CTRL0                         ((0x274b  << 2) + 0xff900000)
// todo :
#define VPU_422TO444_CTRL1                         ((0x274c  << 2) + 0xff900000)
// todo :
// Picture Rotate (PROT) module 1 (for OSD) registers:
#define VPU_PROT1_CLK_GATE                         ((0x2750  << 2) + 0xff900000)
#define VPU_PROT1_GEN_CNTL                         ((0x2751  << 2) + 0xff900000)
#define VPU_PROT1_X_START_END                      ((0x2752  << 2) + 0xff900000)
#define VPU_PROT1_Y_START_END                      ((0x2753  << 2) + 0xff900000)
#define VPU_PROT1_Y_LEN_STEP                       ((0x2754  << 2) + 0xff900000)
#define VPU_PROT1_RPT_LOOP                         ((0x2755  << 2) + 0xff900000)
#define VPU_PROT1_RPT_PAT                          ((0x2756  << 2) + 0xff900000)
#define VPU_PROT1_DDR                              ((0x2757  << 2) + 0xff900000)
#define VPU_PROT1_RBUF_ROOM                        ((0x2758  << 2) + 0xff900000)
#define VPU_PROT1_STAT_0                           ((0x2759  << 2) + 0xff900000)
#define VPU_PROT1_STAT_1                           ((0x275a  << 2) + 0xff900000)
#define VPU_PROT1_STAT_2                           ((0x275b  << 2) + 0xff900000)
#define VPU_PROT1_REQ_ONOFF                        ((0x275c  << 2) + 0xff900000)
// Picture Rotate (PROT) module 2 (for VD) registers:
#define VPU_PROT2_CLK_GATE                         ((0x2760  << 2) + 0xff900000)
#define VPU_PROT2_GEN_CNTL                         ((0x2761  << 2) + 0xff900000)
#define VPU_PROT2_X_START_END                      ((0x2762  << 2) + 0xff900000)
#define VPU_PROT2_Y_START_END                      ((0x2763  << 2) + 0xff900000)
#define VPU_PROT2_Y_LEN_STEP                       ((0x2764  << 2) + 0xff900000)
#define VPU_PROT2_RPT_LOOP                         ((0x2765  << 2) + 0xff900000)
#define VPU_PROT2_RPT_PAT                          ((0x2766  << 2) + 0xff900000)
#define VPU_PROT2_DDR                              ((0x2767  << 2) + 0xff900000)
#define VPU_PROT2_RBUF_ROOM                        ((0x2768  << 2) + 0xff900000)
#define VPU_PROT2_STAT_0                           ((0x2769  << 2) + 0xff900000)
#define VPU_PROT2_STAT_1                           ((0x276a  << 2) + 0xff900000)
#define VPU_PROT2_STAT_2                           ((0x276b  << 2) + 0xff900000)
#define VPU_PROT2_REQ_ONOFF                        ((0x276c  << 2) + 0xff900000)
// Picture Rotate (PROT) module 3 (for VD) registers:
#define VPU_PROT3_CLK_GATE                         ((0x2770  << 2) + 0xff900000)
#define VPU_PROT3_GEN_CNTL                         ((0x2771  << 2) + 0xff900000)
#define VPU_PROT3_X_START_END                      ((0x2772  << 2) + 0xff900000)
#define VPU_PROT3_Y_START_END                      ((0x2773  << 2) + 0xff900000)
#define VPU_PROT3_Y_LEN_STEP                       ((0x2774  << 2) + 0xff900000)
#define VPU_PROT3_RPT_LOOP                         ((0x2775  << 2) + 0xff900000)
#define VPU_PROT3_RPT_PAT                          ((0x2776  << 2) + 0xff900000)
#define VPU_PROT3_DDR                              ((0x2777  << 2) + 0xff900000)
#define VPU_PROT3_RBUF_ROOM                        ((0x2778  << 2) + 0xff900000)
#define VPU_PROT3_STAT_0                           ((0x2779  << 2) + 0xff900000)
#define VPU_PROT3_STAT_1                           ((0x277a  << 2) + 0xff900000)
#define VPU_PROT3_STAT_2                           ((0x277b  << 2) + 0xff900000)
#define VPU_PROT3_REQ_ONOFF                        ((0x277c  << 2) + 0xff900000)
//Bit 20    reg_viu2vdin_sw_reset:   software reset
//Bit 19:18 reg_viu2vdin_dn_ratio:   down-scale ratio; 0: no scale; 1: 1/2;  2:1/4; 3: reserved
//Bit 17:16 reg_viu2vdin_flt_mode:   filter mode; 0: no filter; 1:[0 2 2 0]/4; 2:[1 1 1 1]/4; 3:[1 3 3 1]/8
//Bit 15:14 reversed
//Bit 13:0  reg_viu2vdin_hsize:      source horizontal size
#define VPU_VIU2VDIN_HDN_CTRL                      ((0x2780  << 2) + 0xff900000)
#define VPU_VIU_ASYNC_MASK                         ((0x2781  << 2) + 0xff900000)
#define VDIN_MISC_CTRL                             ((0x2782  << 2) + 0xff900000)
// vpu arbtration :
// the segment is 8'h90-8'hc8
//
// Reading file:  vpu_arb_axi_regs.h
//
// synopsys translate_off
// synopsys translate_on
////===============================////
//// reg
////===============================////
#define VPU_RDARB_MODE_L1C1                        ((0x2790  << 2) + 0xff900000)
//Bit   31:22,    reserved
//Bit   21:16,    rdarb_sel           uns, default = 0 ,
//                                    rdarb_sel[0]==0 slave dc0 connect master port0 rdarb_sel[0]==1 slave dc0 connect master port1
//                                    rdarb_sel[1]==0 slave dc1 connect master port0 rdarb_sel[1]==1 slave dc1 connect master port1
//                                    rdarb_sel[2]==0 slave dc2 connect master port0 rdarb_sel[2]==1 slave dc2 connect master port1
//                                    rdarb_sel[3]==0 slave dc3 connect master port0 rdarb_sel[3]==1 slave dc3 connect master port1
//                                    rdarb_sel[4]==0 slave dc4 connect master port0 rdarb_sel[4]==1 slave dc4 connect master port1
//                                    rdarb_sel[5]==0 slave dc5 connect master port0 rdarb_sel[5]==1 slave dc5 connect master port1
//Bit   15:10,    reserved
//Bit   9:8,      rdarb_arb_mode      uns, default = 0 ,
//                                    rdarb_arb_mode[0] master port0 arb way,
//                                    rdarb_arb_mode[1] master port1 arb way,
//Bit   7:4,      reserved
//Bit   3:0,      rdarb_gate_clk_ctrl uns, default = 0 ,
//                                    rdarb_gate_clk_ctrl[1:0] master port0 clk gate control
//                                    rdarb_gate_clk_ctrl[3:2] master port1 clk gate control
#define VPU_RDARB_REQEN_SLV_L1C1                   ((0x2791  << 2) + 0xff900000)
//Bit   31:12,     reserved
//Bit   11:0,     rdarb_dc_req_en     unsigned  , default = 12'hfff
//                                    rdarb_dc_req_en[0]: the slv0 req to mst port0 enable,
//                                    rdarb_dc_req_en[1]: the slv1 req to mst port0 enable,
//                                    rdarb_dc_req_en[2]: the slv2 req to mst port0 enable,
//                                    rdarb_dc_req_en[3]: the slv3 req to mst port0 enable,
//                                    rdarb_dc_req_en[4]: the slv4 req to mst port0 enable,
//                                    rdarb_dc_req_en[5]: the slv5 req to mst port0 enable,
//                                    rdarb_dc_req_en[6]: the slv0 req to mst port1 enable,
//                                    rdarb_dc_req_en[7]: the slv1 req to mst port1 enable,
//                                    rdarb_dc_req_en[8]: the slv2 req to mst port1 enable,
//                                    rdarb_dc_req_en[9]: the slv3 req to mst port1 enable,
//                                    rdarb_dc_req_en[10]: the slv4 req to mst port1 enable,
//                                    rdarb_dc_req_en[11]: the slv5 req to mst port1 enable,
#define VPU_RDARB_WEIGH0_SLV_L1C1                  ((0x2792  << 2) + 0xff900000)
//Bit   31:30,    reserved
//Bit   29:0,     rddc_weigh_sxn     unsigned  , default = 0
//                                    rddc_weigh_sxn[0*6+:6]: the slv0 req weigh number
//                                    rddc_weigh_sxn[1*6+:6]: the slv1 req weigh number
//                                    rddc_weigh_sxn[2*6+:6]: the slv2 req weigh number
//                                    rddc_weigh_sxn[3*6+:6]: the slv3 req weigh number
//                                    rddc_weigh_sxn[4*6+:6]: the slv4 req weigh number
#define VPU_RDARB_WEIGH1_SLV_L1C1                  ((0x2793  << 2) + 0xff900000)
//Bit   31:6,    reserved
//Bit   5:0,     rddc_weigh_sxn     unsigned  , default = 0
//                                    rddc_weigh_sxn[5*6+:6]: the slv5 req weigh number
#define VPU_WRARB_MODE_L1C1                        ((0x2794  << 2) + 0xff900000)
//Bit   31:22,    reserved
//Bit   21:16,    wrarb_sel           uns, default = 0 ,
//                                    wrarb_sel[0]==0 slave dc0 connect master port0 wrarb_sel[0]==1 slave dc0 connect master port1
//                                    wrarb_sel[1]==0 slave dc1 connect master port0 wrarb_sel[1]==1 slave dc1 connect master port1
//                                    wrarb_sel[2]==0 slave dc2 connect master port0 wrarb_sel[2]==1 slave dc2 connect master port1
//                                    wrarb_sel[3]==0 slave dc3 connect master port0 wrarb_sel[3]==1 slave dc3 connect master port1
//                                    wrarb_sel[4]==0 slave dc4 connect master port0 wrarb_sel[4]==1 slave dc4 connect master port1
//                                    wrarb_sel[5]==0 slave dc5 connect master port0 wrarb_sel[5]==1 slave dc5 connect master port1
//Bit   15:10,    reserved
//Bit   9:8,      wrarb_arb_mode      uns, default = 0 ,
//                                    wrarb_arb_mode[0] master port0 arb way,
//                                    wrarb_arb_mode[1] master port1 arb way,
//Bit   7:4,      reserved
//Bit   3:0,      wrarb_gate_clk_ctrl uns, default = 0 ,
//                                    wrarb_gate_clk_ctrl[1:0] master port0 clk gate control
//                                    wrarb_gate_clk_ctrl[3:2] master port1 clk gate control
#define VPU_WRARB_REQEN_SLV_L1C1                   ((0x2795  << 2) + 0xff900000)
//Bit   31:12,     reserved
//Bit   11:0,     wrarb_dc_req_en     unsigned  , default = 0
//                                    wrarb_dc_req_en[0]: the slv0 req to mst port0 enable,
//                                    wrarb_dc_req_en[1]: the slv1 req to mst port0 enable,
//                                    wrarb_dc_req_en[2]: the slv2 req to mst port0 enable,
//                                    wrarb_dc_req_en[3]: the slv3 req to mst port0 enable,
//                                    wrarb_dc_req_en[4]: the slv4 req to mst port0 enable,
//                                    wrarb_dc_req_en[5]: the slv5 req to mst port0 enable,
//                                    wrarb_dc_req_en[0]: the slv0 req to mst port1 enable,
//                                    wrarb_dc_req_en[1]: the slv1 req to mst port1 enable,
//                                    wrarb_dc_req_en[2]: the slv2 req to mst port1 enable,
//                                    wrarb_dc_req_en[3]: the slv3 req to mst port1 enable,
//                                    wrarb_dc_req_en[4]: the slv4 req to mst port1 enable,
//                                    wrarb_dc_req_en[5]: the slv5 req to mst port1 enable,
#define VPU_WRARB_WEIGH0_SLV_L1C1                  ((0x2796  << 2) + 0xff900000)
//Bit   31:30,    reserved
//Bit   29:0,     wrdc_weigh_sxn     unsigned  , default = 0
//                                    wrdc_weigh_sxn[0*6+:6]: the slv0 req weigh number
//                                    wrdc_weigh_sxn[1*6+:6]: the slv1 req weigh number
//                                    wrdc_weigh_sxn[2*6+:6]: the slv2 req weigh number
//                                    wrdc_weigh_sxn[3*6+:6]: the slv3 req weigh number
//                                    wrdc_weigh_sxn[4*6+:6]: the slv4 req weigh number
#define VPU_WRARB_WEIGH1_SLV_L1C1                  ((0x2797  << 2) + 0xff900000)
//Bit   31:6,    reserved
//Bit   5:0,     wrdc_weigh_sxn     unsigned  , default = 0
//                                    wrdc_weigh_sxn[5*6+:6]: the slv5 req weigh number
#define VPU_RDWR_ARB_STATUS_L1C1                   ((0x2798  << 2) + 0xff900000)
//Bit   31:4,    reserved
//Bit    3:2,    wrarb_arb_busy     unsigned  , default = 0
//Bit    1:0,    rdarb_arb_busy     unsigned  , default = 0
#define VPU_RDARB_MODE_L1C2                        ((0x2799  << 2) + 0xff900000)
//Bit   31:21,    reserved
//Bit   20:16,    rdarb_sel           uns, default = 0 ,
//                                    rdarb_sel[0]==0 slave dc0 connect master port0 rdarb_sel[0]==1 slave dc0 connect master port1
//                                    rdarb_sel[1]==0 slave dc1 connect master port0 rdarb_sel[1]==1 slave dc1 connect master port1
//                                    rdarb_sel[2]==0 slave dc2 connect master port0 rdarb_sel[2]==1 slave dc2 connect master port1
//                                    rdarb_sel[3]==0 slave dc3 connect master port0 rdarb_sel[3]==1 slave dc3 connect master port1
//                                    rdarb_sel[4]==0 slave dc4 connect master port0 rdarb_sel[4]==1 slave dc4 connect master port1
//Bit   15:10,    reserved
//Bit   9:8,      rdarb_arb_mode      uns, default = 0 ,
//                                    rdarb_arb_mode[0] master port0 arb way,
//                                    rdarb_arb_mode[1] master port1 arb way,
//Bit   7:4,      reserved
//Bit   3:0,      rdarb_gate_clk_ctrl uns, default = 0 ,
//                                    rdarb_gate_clk_ctrl[1:0] master port0 clk gate control
//                                    rdarb_gate_clk_ctrl[3:2] master port0 clk gate control
#define VPU_RDARB_REQEN_SLV_L1C2                   ((0x279a  << 2) + 0xff900000)
//Bit   31:10,     reserved
//Bit    9:0,     rdarb_dc_req_en     unsigned  , default = 0
//                                    rdarb_dc_req_en[0]: the slv0 req to mst port0 enable,
//                                    rdarb_dc_req_en[1]: the slv1 req to mst port0 enable,
//                                    rdarb_dc_req_en[2]: the slv2 req to mst port0 enable,
//                                    rdarb_dc_req_en[3]: the slv3 req to mst port0 enable,
//                                    rdarb_dc_req_en[4]: the slv4 req to mst port0 enable,
//                                    rdarb_dc_req_en[5]: the slv0 req to mst port1 enable,
//                                    rdarb_dc_req_en[6]: the slv1 req to mst port1 enable,
//                                    rdarb_dc_req_en[7]: the slv2 req to mst port1 enable,
//                                    rdarb_dc_req_en[8]: the slv3 req to mst port1 enable,
//                                    rdarb_dc_req_en[9]: the slv4 req to mst port1 enable,
#define VPU_RDARB_WEIGH0_SLV_L1C2                  ((0x279b  << 2) + 0xff900000)
//Bit   31:30,    reserved
//Bit   29:0,     rddc_weigh_sxn     unsigned  , default = 0
//                                    rddc_weigh_sxn[0*6+:6]: the slv0 req weigh number
//                                    rddc_weigh_sxn[1*6+:6]: the slv1 req weigh number
//                                    rddc_weigh_sxn[2*6+:6]: the slv2 req weigh number
//                                    rddc_weigh_sxn[3*6+:6]: the slv3 req weigh number
//                                    rddc_weigh_sxn[4*6+:6]: the slv4 req weigh number
#define VPU_RDWR_ARB_STATUS_L1C2                   ((0x279c  << 2) + 0xff900000)
//Bit   31:3,    reserved
//Bit      2,    wrarb_arb_busy     unsigned  , default = 0
//Bit    1:0,    rdarb_arb_busy     unsigned  , default = 0
#define VPU_RDARB_MODE_L2C1                        ((0x279d  << 2) + 0xff900000)
//Bit   31:28,    reserved
//Bit   27:16,    rdarb_sel           uns, default = 0 ,
//                                    rdarb_sel[0]==0 slave dc0 connect master port0 rdarb_sel[0]==1 slave dc0 connect master port1
//                                    rdarb_sel[1]==0 slave dc1 connect master port0 rdarb_sel[1]==1 slave dc1 connect master port1
//                                    rdarb_sel[2]==0 slave dc2 connect master port0 rdarb_sel[2]==1 slave dc2 connect master port1
//                                    rdarb_sel[3]==0 slave dc3 connect master port0 rdarb_sel[3]==1 slave dc3 connect master port1
//                                    rdarb_sel[4]==0 slave dc4 connect master port0 rdarb_sel[4]==1 slave dc4 connect master port1
//                                    rdarb_sel[5]==0 slave dc5 connect master port0 rdarb_sel[5]==1 slave dc5 connect master port1
//Bit   15:11,    reserved
//Bit   10:8,      rdarb_arb_mode      uns, default = 0 ,
//                                    rdarb_arb_mode[0] master port0 arb way,
//                                    rdarb_arb_mode[1] master port1 arb way,
//Bit   7:6,      reserved
//Bit   5:0,      rdarb_gate_clk_ctrl uns, default = 0 ,
//                                    rdarb_gate_clk_ctrl[1:0] master port0 clk gate control
//                                    rdarb_gate_clk_ctrl[3:2] master port1 clk gate control
//                                    rdarb_gate_clk_ctrl[5:4] master port2 clk gate control
#define VPU_RDARB_REQEN_SLV_L2C1                   ((0x279e  << 2) + 0xff900000)
//Bit   31:18,     reserved
//Bit   17:0,     rdarb_dc_req_en     unsigned  , default = 0
//                                    rdarb_dc_req_en[0]: the slv0 req to mst port0 enable,
//                                    rdarb_dc_req_en[1]: the slv1 req to mst port0 enable,
//                                    rdarb_dc_req_en[2]: the slv2 req to mst port0 enable,
//                                    rdarb_dc_req_en[3]: the slv3 req to mst port0 enable,
//                                    rdarb_dc_req_en[4]: the slv4 req to mst port0 enable,
//                                    rdarb_dc_req_en[5]: the slv5 req to mst port0 enable,
//                                    rdarb_dc_req_en[0]: the slv0 req to mst port1 enable,
//                                    rdarb_dc_req_en[1]: the slv1 req to mst port1 enable,
//                                    rdarb_dc_req_en[2]: the slv2 req to mst port1 enable,
//                                    rdarb_dc_req_en[3]: the slv3 req to mst port1 enable,
//                                    rdarb_dc_req_en[4]: the slv4 req to mst port1 enable,
//                                    rdarb_dc_req_en[5]: the slv5 req to mst port1 enable,
#define VPU_RDARB_WEIGH0_SLV_L2C1                  ((0x279f  << 2) + 0xff900000)
//Bit   31:30,    reserved
//Bit   29:0,     rddc_weigh_sxn     unsigned  , default = 0
//                                    rddc_weigh_sxn[0*6+:6]: the slv0 req weigh number
//                                    rddc_weigh_sxn[1*6+:6]: the slv1 req weigh number
//                                    rddc_weigh_sxn[2*6+:6]: the slv2 req weigh number
//                                    rddc_weigh_sxn[3*6+:6]: the slv3 req weigh number
//                                    rddc_weigh_sxn[4*6+:6]: the slv4 req weigh number
#define VPU_RDARB_WEIGH1_SLV_L2C1                  ((0x27a0  << 2) + 0xff900000)
//Bit   31:6,    reserved
//Bit   5:0,     rddc_weigh_sxn     unsigned  , default = 0
//                                    rddc_weigh_sxn[5*6+:6]: the slv5 req weigh number
#define VPU_RDWR_ARB_STATUS_L2C1                   ((0x27a1  << 2) + 0xff900000)
//Bit   31:4,    reserved
//Bit    3:2,    wrarb_arb_busy     unsigned  , default = 0
//Bit    1:0,    rdarb_arb_busy     unsigned  , default = 0
#define VPU_WRARB_MODE_L2C1                        ((0x27a2  << 2) + 0xff900000)
//Bit   31:20,    reserved
//Bit   19:16,    wrarb_sel           uns, default = 0 ,
//                                    wrarb_sel[0]==0 slave dc0 connect master port0 wrarb_sel[0]==1 slave dc0 connect master port1
//                                    wrarb_sel[1]==0 slave dc1 connect master port0 wrarb_sel[1]==1 slave dc1 connect master port1
//                                    wrarb_sel[2]==0 slave dc2 connect master port0 wrarb_sel[2]==1 slave dc2 connect master port1
//                                    wrarb_sel[3]==0 slave dc3 connect master port0 wrarb_sel[3]==1 slave dc3 connect master port1
//Bit   15:10,    reserved
//Bit   9:8,      wrarb_arb_mode      uns, default = 0 ,
//                                    wrarb_arb_mode[0] master port0 arb way,
//                                    wrarb_arb_mode[1] master port1 arb way,
//Bit   7:4,      reserved
//Bit   3:0,      wrarb_gate_clk_ctrl uns, default = 0 ,
//                                    wrarb_gate_clk_ctrl[1:0] master port0 clk gate control
//                                    wrarb_gate_clk_ctrl[3:2] master port0 clk gate control
#define VPU_WRARB_REQEN_SLV_L2C1                   ((0x27a3  << 2) + 0xff900000)
//Bit   31:8,     reserved
//Bit    7:0,     wrarb_dc_req_en     unsigned  , default = 0
//                                    wrarb_dc_req_en[0]: the slv0 req to mst port0 enable,
//                                    wrarb_dc_req_en[1]: the slv1 req to mst port0 enable,
//                                    wrarb_dc_req_en[2]: the slv2 req to mst port0 enable,
//                                    wrarb_dc_req_en[3]: the slv3 req to mst port0 enable,
//                                    wrarb_dc_req_en[0]: the slv0 req to mst port1 enable,
//                                    wrarb_dc_req_en[1]: the slv1 req to mst port1 enable,
//                                    wrarb_dc_req_en[2]: the slv2 req to mst port1 enable,
//                                    wrarb_dc_req_en[3]: the slv3 req to mst port1 enable,
#define VPU_WRARB_WEIGH0_SLV_L2C1                  ((0x27a4  << 2) + 0xff900000)
//Bit   31:24,    reserved
//Bit   23:0,     wrdc_weigh_sxn     unsigned  , default = 0
//                                    wrdc_weigh_sxn[0*6+:6]: the slv0 req weigh number
//                                    wrdc_weigh_sxn[1*6+:6]: the slv1 req weigh number
//                                    wrdc_weigh_sxn[2*6+:6]: the slv2 req weigh number
//                                    wrdc_weigh_sxn[3*6+:6]: the slv3 req weigh number
#define VPU_ASYNC_RD_MODE0                         ((0x27a5  << 2) + 0xff900000)
//Bit   31:19,    reserved
//Bit   18,       req_en            unsigned  , default = 0  async enable
//Bit   17:16,    clk_gate_ctrl     unsigned  , default = 0  async clock gate control
//Bit   15:12,    auto_arugt_weight unsigned  , default = 4
//Bit   11,       reserved
//Bit   10:9,     arugt_sel         unsigned  , default = 0
//                                  00 : use auto fifo arugt generate the output arugt.
//                                  01 : use the register bit control
//                                  00 : use the input arguent
//Bit   8,        arguent_cfg       unsigned  , default = 0  register arguent control bit
//Bit   7:4,      rd_hold_num       unsigned  , default = 4  hold the read command threshold
//Bit   3:0,      rd_rel_num        unsigned  , default = 0  release the read command threshold
#define VPU_ASYNC_RD_MODE1                         ((0x27a6  << 2) + 0xff900000)
//Bit   31:19,    reserved
//Bit   18,       req_en            unsigned  , default = 0  async enable
//Bit   17:16,    clk_gate_ctrl     unsigned  , default = 0  async clock gate control
//Bit   15:12,    auto_arugt_weight unsigned  , default = 4
//Bit   11,       reserved
//Bit   10:9,     arugt_sel         unsigned  , default = 0
//                                  00 : use auto fifo arugt generate the output arugt.
//                                  01 : use the register bit control
//                                  00 : use the input arguent
//Bit   8,        arguent_cfg       unsigned  , default = 0  register arguent control bit
//Bit   7:4,      rd_hold_num       unsigned  , default = 4  hold the read command threshold
//Bit   3:0,      rd_rel_num        unsigned  , default = 0  release the read command threshold
#define VPU_ASYNC_RD_MODE2                         ((0x27a7  << 2) + 0xff900000)
//Bit   31:19,    reserved
//Bit   18,       req_en            unsigned  , default = 0  async enable
//Bit   17:16,    clk_gate_ctrl     unsigned  , default = 0  async clock gate control
//Bit   15:12,    auto_arugt_weight unsigned  , default = 4
//Bit   11,       reserved
//Bit   10:9,     arugt_sel         unsigned  , default = 0
//                                  00 : use auto fifo arugt generate the output arugt.
//                                  01 : use the register bit control
//                                  00 : use the input arguent
//Bit   8,        arguent_cfg       unsigned  , default = 0  register arguent control bit
//Bit   7:4,      rd_hold_num       unsigned  , default = 4  hold the read command threshold
//Bit   3:0,      rd_rel_num        unsigned  , default = 0  release the read command threshold
#define VPU_ASYNC_RD_MODE3                         ((0x27a8  << 2) + 0xff900000)
//Bit   31:19,    reserved
//Bit   18,       req_en            unsigned  , default = 0  async enable
//Bit   17:16,    clk_gate_ctrl     unsigned  , default = 0  async clock gate control
//Bit   15:12,    auto_arugt_weight unsigned  , default = 4
//Bit   11,       reserved
//Bit   10:9,     arugt_sel         unsigned  , default = 0
//                                  00 : use auto fifo arugt generate the output arugt.
//                                  01 : use the register bit control
//                                  00 : use the input arguent
//Bit   8,        arguent_cfg       unsigned  , default = 0  register arguent control bit
//Bit   7:4,      rd_hold_num       unsigned  , default = 4  hold the read command threshold
//Bit   3:0,      rd_rel_num        unsigned  , default = 0  release the read command threshold
#define VPU_ASYNC_RD_MODE4                         ((0x27a9  << 2) + 0xff900000)
//Bit   31:19,    reserved
//Bit   18,       req_en            unsigned  , default = 0  async enable
//Bit   17:16,    clk_gate_ctrl     unsigned  , default = 0  async clock gate control
//Bit   15:12,    auto_arugt_weight unsigned  , default = 4
//Bit   11,       reserved
//Bit   10:9,     arugt_sel         unsigned  , default = 0
//                                  00 : use auto fifo arugt generate the output arugt.
//                                  01 : use the register bit control
//                                  00 : use the input arguent
//Bit   8,        arguent_cfg       unsigned  , default = 0  register arguent control bit
//Bit   7:4,      rd_hold_num       unsigned  , default = 4  hold the read command threshold
//Bit   3:0,      rd_rel_num        unsigned  , default = 0  release the read command threshold
#define VPU_ASYNC_WR_MODE0                         ((0x27aa  << 2) + 0xff900000)
//Bit   31:19,    reserved
//Bit   18,       req_en            unsigned  , default = 0  async enable
//Bit   17:16,    clk_gate_ctrl     unsigned  , default = 0  async clock gate control
//Bit   15:12,    auto_arugt_weight unsigned  , default = 4
//Bit   11,       reserved
//Bit   10:9,     arugt_sel         unsigned  , default = 0
//                                  00 : use auto fifo arugt generate the output arugt.
//                                  01 : use the register bit control
//                                  00 : use the input arguent
//Bit   8,        arguent_cfg       unsigned  , default = 0  register arguent control bit
//Bit   7:4,      wr_hold_num       unsigned  , default = 4  hold the read command threshold
//Bit   3:0,      wr_rel_num        unsigned  , default = 0  release the write command threshold
#define VPU_ASYNC_WR_MODE1                         ((0x27ab  << 2) + 0xff900000)
//Bit   31:19,    reserved
//Bit   18,       req_en            unsigned  , default = 0  async enable
//Bit   17:16,    clk_gate_ctrl     unsigned  , default = 0  async clock gate control
//Bit   15:12,    auto_arugt_weight unsigned  , default = 4
//Bit   11,       reserved
//Bit   10:9,     arugt_sel         unsigned  , default = 0
//                                  00 : use auto fifo arugt generate the output arugt.
//                                  01 : use the register bit control
//                                  00 : use the input arguent
//Bit   8,        arguent_cfg       unsigned  , default = 0  register arguent control bit
//Bit   7:4,      wr_hold_num       unsigned  , default = 4  hold the read command threshold
//Bit   3:0,      wr_rel_num        unsigned  , default = 0  release the write command threshold
#define VPU_ASYNC_WR_MODE2                         ((0x27ac  << 2) + 0xff900000)
//Bit   31:19,    reserved
//Bit   18,       req_en            unsigned  , default = 0  async enable
//Bit   17:16,    clk_gate_ctrl     unsigned  , default = 0  async clock gate control
//Bit   15:12,    auto_arugt_weight unsigned  , default = 4
//Bit   11,       reserved
//Bit   10:9,     arugt_sel         unsigned  , default = 0
//                                  00 : use auto fifo arugt generate the output arugt.
//                                  01 : use the register bit control
//                                  00 : use the input arguent
//Bit   8,        arguent_cfg       unsigned  , default = 0  register arguent control bit
//Bit   7:4,      wr_hold_num       unsigned  , default = 4  hold the read command threshold
//Bit   3:0,      wr_rel_num        unsigned  , default = 0  release the write command threshold
#define VPU_ASYNC_STAT                             ((0x27ad  << 2) + 0xff900000)
//Bit   31:19,    reserved
//Bit   18,       axiwr2_chan_idle  unsigned  , RO, axi write channel2 idle state
//Bit   17,       axiwr1_chan_idle  unsigned  , RO, axi write channel1 idle state
//Bit   16,       axiwr0_chan_idle  unsigned  , RO, axi write channel0 idle state
//Bit   15:5,     reserved
//Bit   4,        axird4_chan_idle  unsigned  , RO, axi read channel4 idle state
//Bit   3,        axird3_chan_idle  unsigned  , RO, axi read channel3 idle state
//Bit   2,        axird2_chan_idle  unsigned  , RO, axi read channel2 idle state
//Bit   1,        axird1_chan_idle  unsigned  , RO, axi read channel1 idle state
//Bit   0,        axird0_chan_idle  unsigned  , RO, axi read channel0 idle state
#define VPU_WRARB_MODE_L1C2                        ((0x27ae  << 2) + 0xff900000)
//Bit   31:18,    reserved
//Bit   17:16,    wrarb_sel           uns, default = 0 ,
//                                    wrarb_sel[0]==0 slave dc0 connect master port0 wrarb_sel[0]==1 slave dc0 connect master port1
//                                    wrarb_sel[1]==0 slave dc1 connect master port0 wrarb_sel[1]==1 slave dc1 connect master port1
//Bit   15:9,     reserved
//Bit   8,        wrarb_arb_mode      uns, default = 0 ,
//                                    wrarb_arb_mode[0] master port0 arb way,
//Bit   7:2,      reserved
//Bit   1:0,      wrarb_gate_clk_ctrl uns, default = 0 ,
//                                    wrarb_gate_clk_ctrl[1:0] master port0 clk gate control
#define VPU_WRARB_REQEN_SLV_L1C2                   ((0x27af  << 2) + 0xff900000)
//Bit   31:2,     reserved
//Bit    1:0,     wrarb_dc_req_en     unsigned  , default = 0
//                                    wrarb_dc_req_en[0]: the slv0 req to mst port0 enable,
//                                    wrarb_dc_req_en[1]: the slv1 req to mst port0 enable,
#define VPU_WRARB_WEIGH0_SLV_L1C2                  ((0x27b0  << 2) + 0xff900000)
//Bit   31:30,    reserved
//Bit   29:0,     wrdc_weigh_sxn     unsigned  , default = 0
//                                    wrdc_weigh_sxn[0*6+:6]: the slv0 req weigh number
//                                    wrdc_weigh_sxn[1*6+:6]: the slv1 req weigh number
//                                    wrdc_weigh_sxn[2*6+:6]: the slv1 req weigh number
//                                    wrdc_weigh_sxn[3*6+:6]: the slv1 req weigh number
//                                    wrdc_weigh_sxn[4*6+:6]: the slv1 req weigh number
#define VPU_WRARB_WEIGH1_SLV_L1C2                  ((0x27b1  << 2) + 0xff900000)
//Bit   31:18,    reserved
//Bit   17:0,     wrdc_weigh_sxn     unsigned  , default = 0
//                                    wrdc_weigh_sxn[5*6+:6]: the slv0 req weigh number
//                                    wrdc_weigh_sxn[6*6+:6]: the slv1 req weigh number
//                                    wrdc_weigh_sxn[7*6+:6]: the slv1 req weigh number
#define VPU_RDARB_WEIGH1_SLV_L1C2                  ((0x27b2  << 2) + 0xff900000)
//Bit   31:18,    reserved
//Bit   17:0,     rddc_weigh_sxn     unsigned  , default = 0
//                                    rddc_weigh_sxn[5*6+:6]: the slv0 req weigh number
//                                    rddc_weigh_sxn[6*6+:6]: the slv1 req weigh number
//                                    rddc_weigh_sxn[7*6+:6]: the slv2 req weigh number
#define VPU_ARB_DBG_CTRL_L1C1                      ((0x27b3  << 2) + 0xff900000)
#define VPU_ARB_DBG_STAT_L1C1                      ((0x27b4  << 2) + 0xff900000)
#define VPU_ARB_DBG_CTRL_L1C2                      ((0x27b5  << 2) + 0xff900000)
#define VPU_ARB_DBG_STAT_L1C2                      ((0x27b6  << 2) + 0xff900000)
#define VPU_ARB_DBG_CTRL_L2C1                      ((0x27b7  << 2) + 0xff900000)
#define VPU_ARB_DBG_STAT_L2C1                      ((0x27b8  << 2) + 0xff900000)
#define VPU_ARB_PATH_CTRL                          ((0x27b9  << 2) + 0xff900000)
#define VPU_ARB_PATH_MAP00                         ((0x27ba  << 2) + 0xff900000)
#define VPU_ARB_PATH_MAP01                         ((0x27bb  << 2) + 0xff900000)
#define VPU_ARB_PATH_MAP02                         ((0x27bc  << 2) + 0xff900000)
#define VPU_ARB_PATH_MAP03                         ((0x27bd  << 2) + 0xff900000)
#define VPU_ARB_PATH_MAP10                         ((0x27be  << 2) + 0xff900000)
#define VPU_ARB_PATH_MAP11                         ((0x27bf  << 2) + 0xff900000)
#define VPU_ARB_PATH_MAP12                         ((0x27c0  << 2) + 0xff900000)
#define VPU_ARB_PATH_MAP13                         ((0x27c1  << 2) + 0xff900000)
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  vpu_arb_axi_regs.h
//
// the segment is 8'he0-8'hef
#define VPU_VENCL_DITH_CTRL                        ((0x27e0  << 2) + 0xff900000)
#define VPU_VENCL_DITH_LUT_1                       ((0x27e1  << 2) + 0xff900000)
#define VPU_VENCL_DITH_LUT_2                       ((0x27e2  << 2) + 0xff900000)
#define VPU_VENCL_DITH_LUT_3                       ((0x27e3  << 2) + 0xff900000)
#define VPU_VENCL_DITH_LUT_4                       ((0x27e4  << 2) + 0xff900000)
#define VPU_VENCL_DITH_LUT_5                       ((0x27e5  << 2) + 0xff900000)
#define VPU_VENCL_DITH_LUT_6                       ((0x27e6  << 2) + 0xff900000)
#define VPU_VENCL_DITH_LUT_7                       ((0x27e7  << 2) + 0xff900000)
#define VPU_VENCL_DITH_LUT_8                       ((0x27e8  << 2) + 0xff900000)
#define VPU_VENCL_DITH_LUT_9                       ((0x27e9  << 2) + 0xff900000)
#define VPU_VENCL_DITH_LUT_10                      ((0x27ea  << 2) + 0xff900000)
#define VPU_VENCL_DITH_LUT_11                      ((0x27eb  << 2) + 0xff900000)
#define VPU_VENCL_DITH_LUT_12                      ((0x27ec  << 2) + 0xff900000)
//new added 4x4 dither
// the segment is 8'hf0
#define VPU_HDMI_DITH_01_04                        ((0x27f0  << 2) + 0xff900000)
#define VPU_HDMI_DITH_01_15                        ((0x27f1  << 2) + 0xff900000)
#define VPU_HDMI_DITH_01_26                        ((0x27f2  << 2) + 0xff900000)
#define VPU_HDMI_DITH_01_37                        ((0x27f3  << 2) + 0xff900000)
#define VPU_HDMI_DITH_10_04                        ((0x27f4  << 2) + 0xff900000)
#define VPU_HDMI_DITH_10_15                        ((0x27f5  << 2) + 0xff900000)
#define VPU_HDMI_DITH_10_26                        ((0x27f6  << 2) + 0xff900000)
#define VPU_HDMI_DITH_10_37                        ((0x27f7  << 2) + 0xff900000)
#define VPU_HDMI_DITH_11_04                        ((0x27f8  << 2) + 0xff900000)
#define VPU_HDMI_DITH_11_15                        ((0x27f9  << 2) + 0xff900000)
#define VPU_HDMI_DITH_11_26                        ((0x27fa  << 2) + 0xff900000)
#define VPU_HDMI_DITH_11_37                        ((0x27fb  << 2) + 0xff900000)
#define VPU_HDMI_DITH_CNTL                         ((0x27fc  << 2) + 0xff900000)
//========================================================================
//  MIPI CSI2 Controller Adaptor    (16'h2a00 - 16'h2aff)
//
//========================================================================
//`define  CSI2_VCBUS_BASE            8'h2a
//`include "csi2_regs.h"
//======================================================================
// D2D3 registers
//======================================================================
//`define     D2D3_VCBUS_BASE         8'h2b
//
// Reading file:  d2d3_regs.h
//
//===========================================================================
// D2D3 Registers    0x - 0x
//===========================================================================
// -----------------------------------------------
// CBUS_BASE:  D2D3_VCBUS_BASE = 0x2b
// -----------------------------------------------
//------------------------------------------------------------------------------
// D2D3 top-level registers
//------------------------------------------------------------------------------
// Bit 31    RW, rd_lock_en,     1 to allow update some read-only registers based on filed
// Bit 30    RW, sw_rst_nobuf,   1 to reset the whole d2d3 unit
// Bit 29:28 RW, clk_auto_dis,   [29] DBR clock disable
//                               [28] DPG clock disable
// Bit 27:16 RW, clk_ctrl,       [27:26] gated clock control for register unit
//                               [25:24] gated clock control for DBR unit
//                               [23:22] gated clock control for LBDG unit
//                               [21:20] gated clock control for MBDG unit
//                               [19:18] gated clock control for CBDG unit
//                               [17:16] gated clock control for DBLD unit and SCD81 unit
// Bit 15:12 Reserved
// Bit 11    RW, lo_chroma_sign, 0: negate the u/v component of DBR left channel video output, 1: bypass
// Bit 10    RW, ro_chroma_sign, 0: negate the u/v component of DBR right channel video output, 1: bypass
// Bit 9     RW, vi0_chroma_sign, 0: negate the u/v component of DPG video input, 1: bypass
// Bit 8     RW, vi1_chroma_sign, 0: negate the u/v component of DBR video input, 1: bypass
// Bit 7:5   Reserved
// Bit 4     RW, lg_en,          Enable the LBDG unit and LBDG clock
// Bit 3     RW, mg_en,          Enable the MBDG unit and MBDG clock
// Bit 2     RW, cg_en,          Enable the CBDG unit and CBDG clock
// Bit 1     RW, dbr_en,         Enable the DBR unit and DBR clock
// Bit 0     RW, dpg_en,         Enable the DPG unit and clock except sub-unit CBDG, MBDG and LBDG
#define D2D3_GLB_CTRL                              ((0x2b00  << 2) + 0xff900000)
// Indicate the input picture size in DPG unit
// Bit 31:16 RW, szx_vi_m1,      The horizontal size minus 1
// Bit 15:0  RW, szy_vi_m1,      The vertical size minus 1
#define D2D3_DPG_INPIC_SIZE                        ((0x2b01  << 2) + 0xff900000)
// Indicate the output picture size in DBR unit
// Bit 31:16 RW, szx_vo_m1,      The horizontal size minus 1
// Bit 15:0  RW, szy_vo_m1,      The vertical size minus 1
#define D2D3_DBR_OUTPIC_SIZE                       ((0x2b02  << 2) + 0xff900000)
// Indicate the rectangular window to generate the "depth" in DPG unit
// Bit 31:16 RW, dg_win_x_start, Horizontal start position, count from 0
// Bit 15:0  RW, dg_win_x_end,   Horizontal end position, count from 0
#define D2D3_DGEN_WIN_HOR                          ((0x2b03  << 2) + 0xff900000)
// Indicate the rectangular window to generate the "depth" in DPG unit
// Bit 31:16 RW, dg_win_y_start, Vertical start position, count from 0
// Bit 15:0  RW, dg_win_y_end,   Vertical end position, count from 0
#define D2D3_DGEN_WIN_VER                          ((0x2b04  << 2) + 0xff900000)
//------------------------------------------------------------------------------
// CBDG SCU18 SCD81 SCD81_PRE registers
// cg: color based depth generate module
// scu18: scale up module
// scd81: scale down module
// scd81_pre: scd81 pre-scale-down module
//------------------------------------------------------------------------------
// Indicate parameters of pre-scale-down unit
// Bit 31:16 RW, scd81_hphs_step, horizontal step
// Bit 15:0  RW, scd81_hphs_ini, horizontal initial phase
#define D2D3_PRE_SCD_H                             ((0x2b05  << 2) + 0xff900000)
// Bit 31:16 RW, scu18_iniph,    initial phase in SCU18,
//                               [23:16] indicate the horizontal phase offset from the first data of every line
//                               [31:24] indicate the vertical phase offset from the first line of every frame
// Bit 15:12 Reserved
// Bit 11    RW, scd81_predrop_en, 1 to enable scd81 pre-scale-down function
// Bit 10:9  RW, cg_csc_sel,     Color Space Conversion(CSC) matrix mode selector in CBDG
//                               0: BT.601 (16-235/240)
//                               1: BT.709 (16-235/240)
//                               2: BT.601 (0-255)
//                               3: BT.709 (0-255)
// Bit 8     RW, scu18_rep_en,   1 to double each line of the SCU18 output
// Bit 7:4   RW, scu18_factor,   up-scale factor in SCU18 on DBR input depth data
//                               [7:6] for vertical, 0->1:1, 1->1:2, 2->1:4, 3->1:8
//                               [5:4] for horizontal, 0->1:1, 1->1:2, 2->1:4, 3->1:8
// Bit 3:0   RW, scd81_factor,   down-scale factor in SCD81 on DPG source video
//                               [3:2] for vertical, 0->1:1, 1->2:1, 2->4:1, 3->8:1
//                               [1:0] for horizontal, 0->1:1, 1->2:1, 2->4:1, 3->8:1
#define D2D3_SCALER_CTRL                           ((0x2b06  << 2) + 0xff900000)
// Bit 31:24 RW, cg_rpg_dth,     the down |r-g| threshold for sky detect
// Bit 23:16 RW, cg_rpg_uth,     the up |r-g| threshold for sky detect
// Bit 15:8  RW, cg_lum_dth,     the down Y threshold for sky detect
// Bit 7:0   RW, cg_lum_uth,     the up Y threshold for sky detect
#define D2D3_CG_THRESHOLD_1                        ((0x2b07  << 2) + 0xff900000)
// Bit 31:24 RW, cg_rpb_dth,     the down |r-b| threshold for sky detect
// Bit 23:16 RW, cg_rpb_uth,     the up |r-b| threshold for sky detect
// Bit 15:8  RW, cg_bpg_dth,     the down |b-g| threshold for sky detect
// Bit 7:0   RW, cg_bpg_uth,     the up |b-g| threshold for sky detect
#define D2D3_CG_THRESHOLD_2                        ((0x2b08  << 2) + 0xff900000)
// Bit 31:24 RW, cg_vp_rel_k,    parameter to calculate vanish point reliability
// Bit 23:16 RW, cg_vp_y_thr,    the max limitation to calculate the vanish-point's vertical position
// Bit 15:8  RW, cg_meet_dval,   signed depth value in the sky-bitmap
// Bit 7:0   RW, cg_unmt_dval,   signed depth value not in the sky-bitmap
#define D2D3_CG_PARAM_1                            ((0x2b09  << 2) + 0xff900000)
// Bit 31:16 RW, cg_vpos_thr,    Maximal vertical limitation for sky-bit map when cg_vpos_en=1 and cg_vpos_adpt_en=0
// Bit 15:8  Reserved
// Bit 7     RW, cg_vpos_en,     1 to enable the max vertical limitation for sky-bitmap
// Bit 6     RW, cg_vpos_adpt_en, 1 to enable the adaptive max vertical limitation for sky-bitmap.
//                               It is only valid when cg_vpos_en=1.
//                               The max vertical limitation is the previous field's vanish-point (vertical position) if cg_vpos_adpt_en=1.
// Bit 5:4   RW, cg_lpf_bypass,  bypass of low pass filter
//                               [5]:Vertical bypass, 1: bypass the vertical LPF on the CBDG depth
//                               [4]:Horizontal bypass, 1: bypass the horizontal LPF on the CBDG depth
// Bit 3:0   RW, cg_vp_rel_s,    parameter to calculate vanish point reliability
#define D2D3_CG_PARAM_2                            ((0x2b0a  << 2) + 0xff900000)
// Indicate parameters of pre-scale-down unit
// Bit 31:16 RW, scd81_vphs_step, vertical step
// Bit 15:0  RW, scd81_vphs_ini, vertical initial phase
#define D2D3_PRE_SCD_V                             ((0x2b0b  << 2) + 0xff900000)
//------------------------------------------------------------------------------
// D2P registers
// d2p: depth to parallax transform module
//------------------------------------------------------------------------------
// Bit 31:24 RW, d2p_brdwid,     Horizontal boundary width for parallax, the parallax value would be forced to 0 in boundary,
//                               the d2p_brdwid should not 0 when D2P_WRAP is enabled
// Bit 23:22 Reserved
// Bit 21:20 RW, d2p_lomode,     line output mode,
//                               0:whole line is left or right;  1:whole line is left or right;
//                               2:left/right pixel interleaved;  3:left/right half-line interleaved
// Bit 19    RW, d2p_neg,        1 to exchange the left and right parallax value
// Bit 18    Reserved
// Bit 17    RW, d2p_wrap_en,    1 to enable D2P_WRAP unit
// Bit 16    RW, d2p_lar,        Indicate the first output for left or right, 0: left; 1: right
// Bit 15    RW, d2p_lr_switch,  enable left/right flag filed switch automatically, only valid when parallax output mode is field interleaved
// Bit 14    RW, d2p_1dtolr,     enable to generate 2 parallax data (left and right) from one depth
// Bit 13:12 RW, d2p_out_mode,   Parallax output mode
//                               0:left/right pixel interleaved; 1:line or half line interleaved; 2:field interleaved
// Bit 11:8  RW, d2p_smode,      Shift mode,
//                               0: no shift; 1: enable left shift;
//                               2: enable right shift; 3: both left and right shift are enabled
// Bit 7:0   RW, d2p_offset,     depth offset, signed,
#define D2D3_D2P_PARAM_1                           ((0x2b0c  << 2) + 0xff900000)
// Bit 31:24 RW, d2p_pg0,        positive parallax gain when Parallax value < pt
// Bit 23:16 RW, d2p_pg1,        positive parallax gain when Parallax value >= pt
// Bit 15:8  RW, d2p_pt,         unsigned value used to separate the positive parallax range
// Bit 7:0   RW, d2p_plimit,     The limitation for positive parallax
#define D2D3_D2P_PARAM_2                           ((0x2b0d  << 2) + 0xff900000)
// Bit 31:24 RW, d2p_ng0,        negative parallax gain when Parallax value > -nt
// Bit 23:16 RW, d2p_ng1,        negative parallax gain when Parallax value <= -nt
// Bit 15:8  RW, d2p_nt,         unsigned value used to separate the negative parallax range
// Bit 7:0   RW, d2p_nlimit,     The limitation for negative parallax
#define D2D3_D2P_PARAM_3                           ((0x2b0e  << 2) + 0xff900000)
// Indicate step parameters of SCU18 unit
// Bit 31:17 Reserved
// Bit 16    RW, scu18_step_en,   step set enable in SCU18
// Bit 15:8  RW, scu18_hphs_step, horizontal step in SCU18
// Bit 7:0   RW, scu18_vphs_step, vertical step in SCU18
#define D2D3_SCU18_STEP                            ((0x2b0f  << 2) + 0xff900000)
//------------------------------------------------------------------------------
// LBDG and DBLD registers
// lg: luma based depth generate module
// db: depth blending module
//------------------------------------------------------------------------------
// Bit 31:22 Reserved
// Bit 21:20 RW, db_lpf_bpcoeff, [21]:Vertical factor of low pass filter,
//                               1: Vfactor = 0/0/64/0/0, 0: Vfactor = {db_vf_a,db_vf_b,db_vf_c,db_vf_b,db_vf_a}, see D2D3_CTRL_15
//                               [20]:Horizontal factor of low pass filter,
//                               1: Hfactor = 0/0/64/0/0, 0: Hfactor = {db_hf_a,db_hf_b,db_hf_c,db_hf_b,db_hf_a}, see D2D3_CTRL_14
// Bit 19:18 RW, lg_lpf_bpcoeff, [19]:Vertical factor of low pass filter, 1: Vfactor = 0/64/0, 0: Vfactor = 20/24/20
//                               [18]:Horizontal factor of low pass filter, 1: Hfactor = 0/64/0, 0: Hfactor = 16/32/16
// Bit 17:16 RW, cg_lpf_bpcoeff, [17]:Vertical factor of low pass filter, 1: Vfactor = 0/64/0, 0: Vfactor = 20/24/20
//                               [16]:Horizontal factor of low pass filter, 1: Hfactor = 0/64/0, 0: Hfactor = 16/32/16
// Bit 15:10 Reserved
// Bit 9:8   RW, db_lpf_bypass,  [9] 1 to bypass the vertical LPF on the DBLD depth
//                               [8] 1 to bypass the horizontal LPF on the DBLD depth
// Bit 7:6   RW, lg_lpf_bypass,  [7] 1 to bypass the vertical LPF on the LBDG depth
//                               [6] 1 to bypass the horizontal LPF on the LBDG depth
// Bit 5:0   RW, lg_kc,          gain of CPL(v-u+256-y) to calculate the depth in LBDG
#define D2D3_DPF_LPF_CTRL                          ((0x2b10  << 2) + 0xff900000)
//------------------------------------------------------------------------------
// DBLD registers
// db: depth blending module
//------------------------------------------------------------------------------
// Bit 31:24 RW, db_g2_cg,       gain of CBDG depth in DBLD
// Bit 23:16 RW, db_o2_cg,       offset of CBDG depth in DBLD
// Bit 15:8  RW, db_g1_cg,       gain of CBDG depth using for summary in DBLD
// Bit 7:0   RW, db_o1_cg,       offset of CBDG depth using for summary in DBLD
#define D2D3_DBLD_CG_PARAM                         ((0x2b11  << 2) + 0xff900000)
// Bit 31:24 RW, db_g2_mg,       gain of MBDG depth in DBLD
// Bit 23:16 RW, db_o2_mg,       offset of MBDG depth in DBLD
// Bit 15:8  RW, db_g1_mg,       gain of MBDG depth using for summary in DBLD
// Bit 7:0   RW, db_o1_mg,       offset of MBDG depth using for summary in DBLD
#define D2D3_DBLD_MG_PARAM                         ((0x2b12  << 2) + 0xff900000)
// Bit 31:24 RW, db_g2_lg,       gain of LBDG depth in DBLD
// Bit 23:16 RW, db_o2_lg,       offset of LBDG depth in DBLD
// Bit 15:8  RW, db_g1_lg,       gain of LBDG depth using for summary in DBLD
// Bit 7:0   RW, db_o1_lg,       offset of LBDG depth using for summary in DBLD
#define D2D3_DBLD_LG_PARAM                         ((0x2b13  << 2) + 0xff900000)
// Bit 31:24 RW, db_factor,      unsigned gain of difference in DBLD
// Bit 23:16 RW, db_hf_a,        see register DPF_LPF_CTRL:db_lpf_bpcoeff, sign
// Bit 15:8  RW, db_hf_b,        see register DPF_LPF_CTRL:db_lpf_bpcoeff, sign
// Bit 7:0   RW, db_hf_c,        see register DPF_LPF_CTRL:db_lpf_bpcoeff, sign
#define D2D3_DBLD_LPF_HCOEFF                       ((0x2b14  << 2) + 0xff900000)
// Bit 31:24 RW, db_owin_fill,   signed depth value outside the rectangular window defined in register DGEN_WIN_HOR and DGEN_WIN_VER
// Bit 23:16 RW, db_vf_a,        see register DPF_LPF_CTRL:db_lpf_bpcoeff, sign
// Bit 15:8  RW, db_vf_b,        see register DPF_LPF_CTRL:db_lpf_bpcoeff, sign
// Bit 7:0   RW, db_vf_c,        see register DPF_LPF_CTRL:db_lpf_bpcoeff, sign
#define D2D3_DBLD_LPF_VCOEFF                       ((0x2b15  << 2) + 0xff900000)
// Bit 31:28 RW, hist_depth_idx,
// Bit 27:26 Reserved
// Bit 25    RW, mbdg_dep_neg,   1 to negate the output data of MBDG
// Bit 24    RW, lbdg_dep_neg,   1 to negate the output data of LBDG
// Bit 23:16 RW, db_f1_ctrl,     MUX1 selector
//                               [1:0] MUX1 path1 selector, 0:summary, 1:CBDG, 2:MBDG, 3:LBDG
//                               [3:2] MUX1 path2 selector, 0:summary, 1:CBDG, 2:MBDG, 3:LBDG
//                               [6:4] MUX1 out1 selector, 1:CBDG, 2:MBDG, 3:LBDG, 4:summary, 5:MUX1out0, others:summary
//                               [7] MUX1OUT0 selector, 0:MIN (MUX1PATH1,MUX1Path2), 1:MAX (MUX1Path1,MUX1Path2)
// Bit 15:8  RW, db_f2_ctrl,     MUX2 selector
//                               [1:0] MUX2 path1 selector, 0:MUX1OUT1, 1:CBDG, 2:MBDG, 3:LBDG
//                               [3:2] MUX2 path2 selector, 0:MUX1OUT1, 1:CBDG, 2:MBDG, 3:LBDG
//                               [6:4] MUX2 out1 selector, 1:CBDG, 2:MBDG, 3:LBDG, 4:summary, 5:MUX2out0, others:MUX2out0
//                               [7] MUX2OUT0 selector, 0:MIN (MUX2PATH1,MUX2Path2), 1:MAX (MUX2Path1,MUX2Path2)
// Bit 7:4   RW, db_fifo0_sel,   the source input of FIFO0
//                               0: no use; 1:from CBDG; 2:from MBDG; 3:from LBDG others:reserved
// Bit 3:0   RW, db_fifo1_sel,   the source input of FIFO1
//                               0: no use; 1:from CBDG; 2:from MBDG; 3:from LBDG 4: from FIFO0; others:reserved
#define D2D3_DBLD_PATH_CTRL                        ((0x2b16  << 2) + 0xff900000)
// Indicate the input picture size in SCU18 unit
// Bit 31:16 RW, szy_scui,       The vertical size
// Bit 15:0  RW, szx_scui,       The horizontal size
#define D2D3_SCU18_INPIC_SIZE                      ((0x2b17  << 2) + 0xff900000)
//------------------------------------------------------------------------------
// MBDG registers
// mg: model based depth generate module
//------------------------------------------------------------------------------
// Bit 31:18 Reserved
// Bit 17    RW, mg_vp_en,       mdg vanish point enable, not used
// Bit 16    RW, mg_sw_en,       1 to use the software forced parameter for the point D, U and C in MBDG
// Bit 15:8  RW, mg_owin_fill,   Signed depth value outside the rectangular window defined in register DGEN_WIN_HOR and DGEN_WIN_VER
// Bit 7     RW, mg_iir_en,      1 to enable the 2-taps IIR filter in MBDG
// Bit 6:0   RW, mg_iir,         [6]: 1 to bypass the 2-taps IIR filter in MBDG
//                               [5:0]:Unsigned coefficient of the 2-taps IIR filter in MBDG
//                               [6]:bypass, 1:bypass, 0:not bypass
#define D2D3_MBDG_CTRL                             ((0x2b18  << 2) + 0xff900000)
// Bit 31:28 RW, mg_dtl_pxl_left, Max pixel number (1<< mg_dtl_pxl_left) using in the left window for activities in MBDG
// Bit 27:24 RW, mg_dtl_pxl_right, Max pixel number (1<< mg_dtl_pxl_right) using in the right window for activities in MBDG
// Bit 23:16 RW, mg_cx_sw,       Depth of point C in horizontal curve in MBDG for software forced
// Bit 15:8  RW, mg_ux_sw,       Depth of point U in horizontal curve in MBDG for software forced
// Bit 7:0   RW, mg_dx_sw,       Depth of point D in horizontal curve in MBDG for software forced
#define D2D3_MBDG_PARAM_0                          ((0x2b19  << 2) + 0xff900000)
// Bit 31:28 RW, mg_dtl_pxl_up,  Max pixel number (1<< mg_dtl_pxl_up) using in the top window for activities in MBDG
// Bit 27:24 RW, mg_dtl_pxl_dn,  Max pixel number (1<< mg_dtl_pxl_dn) using in the bottom window for activities in MBDG
// Bit 23:16 RW, mg_cy_sw,       Depth of point C in vertical curve in MBDG for software forced
// Bit 15:8  RW, mg_uy_sw,       Depth of point U in vertical curve in MBDG for software forced
// Bit 7:0   RW, mg_dy_sw,       Depth of point D in vertical curve in MBDG for software forced
#define D2D3_MBDG_PARAM_1                          ((0x2b1a  << 2) + 0xff900000)
// Bit 31:24 RW, mg_dtl_ln_up,   Line number in the top window for activities in MBDG
// Bit 23:16 RW, mg_dtl_ln_dn,   Line number in the bottom window for activities in MBDG
// Bit 15:8  RW, mg_dtl_ln_left, Column number in the left window for activities in MBDG
// Bit 7:0   RW, mg_dtl_ln_right,Column number in the right window for activities in MBDG
#define D2D3_MBDG_PARAM_2                          ((0x2b1b  << 2) + 0xff900000)
// Bit 31:24 RW, mg_y_max,       Software initial depth of point D and U in vertical curve
// Bit 23:16 RW, mg_y_min,       Software initial depth of point C in vertical curve
// Bit 15:8  RW, mg_x_max,       Software initial depth of point D and U in horizontal curve
// Bit 7:0   RW, mg_x_min,       Software initial depth of point C in horizontal curve
#define D2D3_MBDG_PARAM_3                          ((0x2b1c  << 2) + 0xff900000)
// Bit 31:27 Reserved
// Bit 26    RW, mg_y_adapt_en,  1 to enable the adaptive mode for point U/D in vertical curve calculation
// Bit 25    RW, mg_xmm_adapt_en, 1 to enable the XMM adaptive mode for point U/D in horizontal curve calculation
// Bit 24    RW, mg_x_adapt_en,  1 to enable the adaptive mode for point U/D in horizontal curve calculation
// Bit 23:20 RW, mg_ytrans_1,    Shifter controller in vertical curve calculation, if mg_xtrans_1<0, right shift abs(mg_xtrans_1) bits, others left shift abs(mg_xtrans_1) bits
// Bit 19:16 RW, mg_xtrans_1,    Shifter controller in horizontal curve calculation, if mg_xtrans_1<0, right shift abs(mg_xtrans_1) bits, others left shift abs(mg_xtrans_1) bits
// Bit 15:8  RW, mg_yk_0,        The based activities value of the ACT for vertical curve
// Bit 7:0   RW, mg_xk_0,        The based activities value of the ACT for horizontal curve
#define D2D3_MBDG_PARAM_4                          ((0x2b1d  << 2) + 0xff900000)
// Bit 31:24 RW, mg_ysu3,        Quantized value 3 in vertical curve adaptive calculation
// Bit 23:16 RW, mg_ysu2,        Quantized value 2 in vertical curve adaptive calculation
// Bit 15:8  RW, mg_ysu1,        Quantized value 1 in vertical curve adaptive calculation
// Bit 7:0   RW, mg_ysu0,        Quantized value 0 in vertical curve adaptive calculation
#define D2D3_MBDG_PARAM_5                          ((0x2b1e  << 2) + 0xff900000)
// Bit 31:24 RW, mg_xsu3,        Quantized value 3 in horizontal curve adaptive calculation
// Bit 23:16 RW, mg_xsu2,        Quantized value 2 in horizontal curve adaptive calculation
// Bit 15:8  RW, mg_xsu1,        Quantized value 1 in horizontal curve adaptive calculation
// Bit 7:0   RW, mg_xsu0,        Quantized value 0 in horizontal curve adaptive calculation
#define D2D3_MBDG_PARAM_6                          ((0x2b1f  << 2) + 0xff900000)
// Bit 31:16 Reserved
// Bit 15:8  RW, mg_xsu4,        Quantized value 4 in horizontal curve adaptive calculation
// Bit 7:0   RW, mg_ysu4,        Quantized value 4 in vertical curve adaptive calculation
#define D2D3_MBDG_PARAM_7                          ((0x2b20  << 2) + 0xff900000)
// Bit 31:28 RW, dbg_hscnt_sel   see DBG_STATUS_2
// Bit 27:25 Reserved
// Bit 24    RW, dbg_dbr_en,     1 to enable debug mode in DBR
// Bit 23:16 RW, dbg_force_data, Forced data in debug mode
// Bit 15:12 RW, dbg_bld_ctrl,   debug controller for DBLD
//                               [12]:enable;  [13]: 0 for passive mode, 0 for handshake mode
//                               [15:14]: 0 for constant mode, 1 for step1 mode
// Bit 11:8  RW, dbg_mg_ctrl,    debug controller for MBDG
//                               [8]:enable;  [9]: 0 for passive mode, 0 for handshake mode
//                               [11:10]: 0 for constant mode, 1 for step1 mode
// Bit 7:4   RW, dbg_cg_ctrl,    debug controller for CBDG
//                               [4]:enable;  [5]: 0 for passive mode, 0 for handshake mode
//                               [7:6]: 0 for constant mode, 1 for step1 mode
// Bit 3:0   RW, dbg_lg_ctrl,    debug controller for LBDG
//                               [0]:enable;  [1]: 0 for passive mode, 0 for handshake mode
//                               [3:2]: 0 for constant mode, 1 for step1 mode
#define D2D3_DBG_CTRL                              ((0x2b23  << 2) + 0xff900000)
//------------------------------------------------------------------------------
// DWMIF registers
//------------------------------------------------------------------------------
// Bit 31:18 Reserved
// Bit 17    RW, dw_x_rev        0: Normal write data from left to right in horizontal
//                               1: Reversed write data from left to right in horizontal
// Bit 16    RW, dw_y_rev        0: Normal write data from top to bottom in horizontal
//                               1: Reversed write data from bottom to top in horizontal
// Bit 15    RW, dw_done_clr     1 to clear register depw_done (DWMIF_STATUS)
// Bit 14    RW, dw_little_endian, 0: data is ordered in big-endian, 1: little endian
// Bit 13:12 RW, dw_pic_struct,  0:read every line, 1:reserved, 2:read even line, 3:read odd line
// Bit 11    RW, dw_urgent,      urgent index
// Bit 10    RW, dw_clr_wrrsp,   1:clear the write fifo counter
// Bit 9     RW, dw_canvas_wr,   canvas write initialization again
// Bit 8     RW, dw_req_en,      1 to enable write request
// Bit 7:0   RW, dw_canvas_index,Canvas index for the MSB of memory address for memory write
#define D2D3_DWMIF_CTRL                            ((0x2b24  << 2) + 0xff900000)
// Bit 31    Reserved
// Bit 30:16 RW, dw_end_x,       Horizontal end position for memory write, count by BYTE
// Bit 15    Reserved
// Bit 14:0  RW, dw_start_x,     Horizontal start position for memory write, count by BYTE
#define D2D3_DWMIF_HPOS                            ((0x2b25  << 2) + 0xff900000)
// Bit 31:29 Reserved
// Bit 28:16 RW, dw_end_y,       Vertical end position for memory write, count by BYTE
// Bit 15:13 Reserved
// Bit 12:0  RW, dw_start_y,     Vertical start position for memory write, count by BYTE
#define D2D3_DWMIF_VPOS                            ((0x2b26  << 2) + 0xff900000)
// Bit 31:28 Reserved
// Bit 27:16 RW, dw_vsizem1,     Vertical size for memory write, equal the size minus 1
// Bit 15:12 Reserved
// Bit 11:0  RW, dw_hsizem1,     Horizontal size for memory write, equal the size minus 1
#define D2D3_DWMIF_SIZE                            ((0x2b27  << 2) + 0xff900000)
//------------------------------------------------------------------------------
// DRMIF registers
//------------------------------------------------------------------------------
// Bit 31:18 Reserved
// Bit 17    RW, dr_y_rev,       0: Normal Read data from top to bottom in horizontal
//                               1: Reversed read data from bottom to top in horizontal
// Bit 16    RW, dr_x_rev,       0: Normal Read data from left to right in horizontal
//                               1: Reversed read data from right to left in horizontal
// Bit 15    RW, dr_clr_fifo_error, 1 to clear the overflow flag of the sticky FIFO
// Bit 14    RW, dr_little_endian, 0: data is ordered in big-endian; 1: little-endian
// Bit 13:12 RW, dr_pic_struct,  0: progressive;  1: Reserved;
//                               2: interlaced, even line;  3: interlaced, odd line
// Bit 11    RW, dr_urgent,      urgent index, no use in this system
// Bit 10:9  RW, dr_burst_size,  Burst read length for each request; 0=24,1=32,2=48,3=64
// Bit 8     RW, dr_req_en,      1 to enable read request
// Bit 7:0   RW, dr_canvas_index, Canvas index for the MSB of memory address for memory read
#define D2D3_DRMIF_CTRL                            ((0x2b28  << 2) + 0xff900000)
// Bit 31    Reserved
// Bit 30:16 RW, dr_end_x,       Horizontal end position for memory read, count by BYTE
// Bit 15    Reserved
// Bit 14:0  RW, dr_start_x,     Horizontal start position for memory read, count by BYTE
#define D2D3_DRMIF_HPOS                            ((0x2b29  << 2) + 0xff900000)
// Bit 31:29 Reserved
// Bit 28:16 RW, dr_end_y,       Vertical end position for memory read, count by BYTE
// Bit 15:13 Reserved
// Bit 12:0  RW, dr_start_y,     Vertical start position for memory read, count by BYTE
#define D2D3_DRMIF_VPOS                            ((0x2b2a  << 2) + 0xff900000)
//------------------------------------------------------------------------------
// PDR registers
// ddd: parallax based render
//------------------------------------------------------------------------------
// Bit 31:8  Reserved
// Bit 7     RW, ddd_brdlpf_en,  1 to enable the smooth filter on the depth around the boundary
// Bit 6     RW, ddd_extn_black, 1 to enable the function to fill black colour when interpolated pixels is outside the picture in DBR
// Bit 5     RW, ddd_wrap_en,    Reserved
// Bit 4     RW, ddd_hhalf,      1 to indicate the left/right line length is a half of original line.
// Bit 3:2   RW, ddd_out_mode,   Reserved
// Bit 1:0   RW, ddd_lomode,     wrap & pbr interleave mode:
//                               2'b0x: whole line is left or right;
//                               2'b10: d2p_lar=1(D2P_PARAM_1), rlrlrlrl inteleave in one line,
//                                      d2p_lar=0(D2P_PARAM_1), lrlrlrlr inteleave in one line,
//                               2'b11: d2p_lar=1(D2P_PARAM_1), rrrrr?lllll, half line is right, another half is left,
//                                      d2p_lar=0(D2P_PARAM_1), lllll?rrrrr, half line is left, another half is right,
#define D2D3_DBR_DDD_CTRL                          ((0x2b2c  << 2) + 0xff900000)
// Bit 31:0  RW, ddd_dbg_ctrl,   no use
#define D2D3_DBR_DDD_DBG                           ((0x2b2d  << 2) + 0xff900000)
//------------------------------------------------------------------------------
// LRDMX registers
//------------------------------------------------------------------------------
// Bit 31:9  Reserved
// Bit 8     RW, lr_merge,       1: all the left/right input go to the left channel output
// Bit 7:6   RW, lrd_ff0_sel,    FF0 source selector
//                               0:from left input; 1:from right input; 2:from FF0; 3:no used
// Bit 5:4   RW, lrd_ff1_sel,    FF1 source selector
//                               0:from left input; 1:from right input; 2:from FF0; 3:no used
// Bit 3:2   RW, lrd_lout_sel,   left channel DEMUX
//                               00: ff0  01:ff1   10: left input  11:right input
// Bit 1:0   RW, lrd_rout_sel,   right channel DEMUX
//                               00: ff1  01:ff0   10: left input  11:right input
#define D2D3_DBR_LRDMX_CTRL                        ((0x2b2f  << 2) + 0xff900000)
//------------------------------------------------------------------------------
// Read Only registers
//------------------------------------------------------------------------------
// Bit 31:24 RO, ro_cg_vprel,    vanish point's reliability in CBDG
// Bit 23:12 RO, ro_cg_vpx,      vanish point's X-Axis in CBDG
// Bit 11:0  RO, ro_cg_vpy,      vanish point's Y-Axis in CBDG
#define D2D3_CBDG_STATUS_1                         ((0x2b30  << 2) + 0xff900000)
// Bit 31:24 RO, ro_mg_cx[7:0],  X-Axis of point C in horizontal curve in MBDG
// Bit 23:16 RO, ro_mg_ux,       Depth value of point U in horizontal curve in MBDG
// Bit 15:8  RO, ro_mg_dx,       Depth value of point D in horizontal curve in MBDG
// Bit 7:0   RO, ro_mg_minx,     Depth value of point C in horizontal curve in MBDG
#define D2D3_MBDG_STATUS_1                         ((0x2b31  << 2) + 0xff900000)
// Bit 31:24 RO, ro_mg_cy[7:0],  X-Axis of point C in vertical curve in MBDG
// Bit 23:16 RO, ro_mg_uy,       Depth value of point U in vertical curve in MBDG
// Bit 15:8  RO, ro_mg_dy,       Depth value of point D in vertical curve in MBDG
// Bit 7:0   RO, ro_mg_miny,     Depth value of point C in vertical curve in MBDG
#define D2D3_MBDG_STATUS_2                         ((0x2b32  << 2) + 0xff900000)
// Bit 31    RO, ro_wrap_status, 1 indicate the D2P_WRAP is busy to perform the initialization
// Bit 30:8  Reserved
// Bit 7:4   RO, ro_mg_cy[11:8], X-Axis of point C in vertical curve in MBDG
// Bit 3:0   RO, ro_mg_cx[11:8], X-Axis of point C in horizontal curve in MBDG
#define D2D3_MBDG_STATUS_3                         ((0x2b33  << 2) + 0xff900000)
// Bit 31:21 Reserved
// Bit 20:0  RO, ro_mg_sum_u,    ACT(top): activities of the top part
#define D2D3_MBDG_STATUS_4                         ((0x2b34  << 2) + 0xff900000)
// Bit 31:21 Reserved
// Bit 20:0  RO, ro_mg_sum_d,    ACT(bottom): activities of the bottom part
#define D2D3_MBDG_STATUS_5                         ((0x2b35  << 2) + 0xff900000)
// Bit 31:21 Reserved
// Bit 20:0  RO, ro_mg_sum_l,    ACT(left): activities of the left part
#define D2D3_MBDG_STATUS_6                         ((0x2b36  << 2) + 0xff900000)
// Bit 31:21 Reserved
// Bit 20:0  RO, ro_mg_sum_r,    ACT(right): activities of the right part
#define D2D3_MBDG_STATUS_7                         ((0x2b37  << 2) + 0xff900000)
// Bit 31:0 dbg_handshake_ro0,   handshake signal for debug, internal srdy and rrdy
#define D2D3_DBG_STATUS_1                          ((0x2b38  << 2) + 0xff900000)
// Bit 31:0 dbg_hscnt,           dbg_hscnt_sel == 4'h0, output lg hscnt
//                               dbg_hscnt_sel == 4'h1, output cg hscnt
//                               dbg_hscnt_sel == 4'h2, output mg hscnt
//                               dbg_hscnt_sel == 4'h3, output bld hscnt
//                               dbg_hscnt_sel == other value, output 32'h0
#define D2D3_DBG_STATUS_2                          ((0x2b39  << 2) + 0xff900000)
// Bit 31:0 RO, drmif_status,    drmif module internal status
#define D2D3_DRMIF_STATUS                          ((0x2b3a  << 2) + 0xff900000)
// Bit 31:2 RO, Reserved
// Bit 1:0  RO, d2d3_status0,    [1]: depw_done, one field depth write to ddr has done
//                               [0]: dwmif_pending_ddr_wrrsp, 1 to indicate write response from ddr
#define D2D3_DWMIF_STATUS                          ((0x2b3b  << 2) + 0xff900000)
// Bit 31:24 Reserved
// Bit 23:0  RO, ro_meet_sum,    register sumxy_sum_dbg in CBDG
#define D2D3_CBDG_STATUS_2                         ((0x2b3c  << 2) + 0xff900000)
// Bit 31:20 Reserved
// Bit 19:0  RO, ro_hist_depth,
#define D2D3_DBLD_STATUS                           ((0x2b3d  << 2) + 0xff900000)
// Bit 31:0 Reserved
#define D2D3_RESEV_STATUS1                         ((0x2b3e  << 2) + 0xff900000)
// Bit 31:0  Reserved
#define D2D3_RESEV_STATUS2                         ((0x2b3f  << 2) + 0xff900000)
//
// Closing file:  d2d3_regs.h
//
//========================================================================
//  MIPI DSI Host Controller        (16'h2c00 - 16'h2cff)
//
//========================================================================
//`define  DSI_VCBUS_BASE             8'h2c
//`include "dsi_regs.h"
//========================================================================
//  ISP register    (16'h2d00 - 16'h2dff)
//========================================================================
//`define ISP_VCBUS_BASE                   8'h2d
//`include "isp_reg.h"
//`define MADB_VCBUS_BASE                8'h2d
//
// Reading file:  dnr_regs.h
//
// synopsys translate_off
// synopsys translate_on
// -----------------------------------------------
// CBUS_BASE:  MADB_VCBUS_BASE = 0x2d
// -----------------------------------------------
#define DNR_CTRL                                   ((0x2d00  << 2) + 0xff900000)
//Bit 31:17,        reserved
//Bit 16,            reg_dnr_en		                                , dnr enable                  . unsigned  , default = 1
//Bit 15,            reg_dnr_db_vdbstep                          , vdb step, 0: 4, 1: 8        . unsigned  , default = 1
//Bit 14,            reg_dnr_db_vdbprten                         , vdb protectoin enable       . unsigned  , default = 1
//Bit 13,            reg_dnr_gbs_difen                           , enable dif (between LR and LL/RR) condition for gbs stat.. unsigned  , default = 0
//Bit 12,            reg_dnr_luma_en                             , enable ycbcr2luma module    . unsigned  , default = 1
//Bit 11:10,        reg_dnr_db_mod                              , deblocking mode, 0: disable, 1: horizontal deblocking, 2: vertical deblocking, 3: horizontal & vertical deblocking. unsigned  , default = 3
//Bit  9,            reg_dnr_db_chrmen                           , enable chroma deblocking    . unsigned  , default = 1
//Bit  8,            reg_dnr_hvdif_mod                           , 0: calc. difs by original Y, 1: by new luma. unsigned  , default = 1
//Bit  7,            reserved
//Bit  6: 4,        reg_dnr_demo_lften                          , b0: Y b1:U b2:V             . unsigned  , default = 7
//Bit  3,            reserved
//Bit  2: 0,        reg_dnr_demo_rgten                          , b0: Y b1:U b2:V             . unsigned  , default = 7
#define DNR_HVSIZE                                 ((0x2d01  << 2) + 0xff900000)
//Bit 31:29,        reserved
//Bit 28:16,        reg_dnr_hsize                               , hsize                       . unsigned  , default = 0
//Bit 15:13,        reserved
//Bit 12: 0,        reg_dnr_vsize                               , vsize                       . unsigned  , default = 0
#define DNR_DBLK_BLANK_NUM                         ((0x2d02  << 2) + 0xff900000)
//Bit 31:16,        reserved
//Bit 15: 8,        reg_dblk_hblank_num                         , deblock hor blank num       . unsigned  , default = 16
//Bit  7: 0,        reg_dblk_vblank_num                         , deblock ver blank num       . unsigned  , default = 45
#define DNR_BLK_OFFST                              ((0x2d03  << 2) + 0xff900000)
//Bit 31: 7,        reserved
//Bit  6: 4,        reg_dnr_hbofst                              , horizontal block offset may provide by software calc.. unsigned  , default = 0
//Bit  3,            reserved
//Bit  2: 0,        reg_dnr_vbofst                              , vertical block offset may provide by software calc.. unsigned  , default = 0
#define DNR_GBS                                    ((0x2d04  << 2) + 0xff900000)
//Bit 31: 2,        reserved
//Bit  1: 0,        reg_dnr_gbs                                 , global block strength may update by software calc.. unsigned  , default = 0
#define DNR_HBOFFST_STAT                           ((0x2d05  << 2) + 0xff900000)
//Bit 31:24,        reg_dnr_hbof_difthd                         , dif threshold (>=) between LR and LL/RR. unsigned  , default = 2
//Bit 23:16,        reg_dnr_hbof_edgethd                        , edge threshold (<=) for LR  . unsigned  , default = 32
//Bit 15: 8,        reg_dnr_hbof_flatthd                        , flat threshold (>=) for LR  . unsigned  , default = 0
//Bit  7,            reserved
//Bit  6: 4,        reg_dnr_hbof_delta                          , delta for weighted bin accumulator. unsigned  , default = 1
//Bit  3,            reserved
//Bit  2: 0,        reg_dnr_hbof_statmod                        , statistic mode for horizontal block offset, 0: count flags for 8-bin, 1: count LRs for 8-bin, 2: count difs for 8-bin, 3: count weighted flags for 8-bin, 4: count flags for first 32-bin, 5: count LRs for first 32-bin, 6 or 7: count difs for first 32-bin. unsigned  , default = 2
#define DNR_VBOFFST_STAT                           ((0x2d06  << 2) + 0xff900000)
//Bit 31:24,        reg_dnr_vbof_difthd                         , dif threshold (>=) between Up and Dw. unsigned  , default = 1
//Bit 23:16,        reg_dnr_vbof_edgethd                        , edge threshold (<=) for Up/Dw. unsigned  , default = 16
//Bit 15: 8,        reg_dnr_vbof_flatthd                        , flat threshold (>=) for Up/Dw. unsigned  , default = 0
//Bit  7,            reserved
//Bit  6: 4,        reg_dnr_vbof_delta                          , delta for weighted bin accumulator. unsigned  , default = 1
//Bit  3,            reserved
//Bit  2: 0,        reg_dnr_vbof_statmod                        , statistic mode for vertical block offset, 0: count flags for 8-bin, 1: count Ups for 8-bin, 2: count difs for 8-bin, 3: count weighted flags for 8-bin, 4: count flags for first 32-bin, 5: count Ups for first 32-bin, 6 or 7: count difs for first 32-bin. unsigned  , default = 2
#define DNR_GBS_STAT                               ((0x2d07  << 2) + 0xff900000)
//Bit 31:24,        reg_dnr_gbs_edgethd                         , edge threshold (<=) for LR  . unsigned  , default = 32
//Bit 23:16,        reg_dnr_gbs_flatthd                         , flat threshold (>=) for LR  . unsigned  , default = 0
//Bit 15: 8,        reg_dnr_gbs_varthd                          , variation threshold (<=) for Lvar/Rvar. unsigned  , default = 16
//Bit  7: 0,        reg_dnr_gbs_difthd                          , dif threshold (>=) between LR and LL/RR. unsigned  , default = 2
#define DNR_STAT_X_START_END                       ((0x2d08  << 2) + 0xff900000)
//Bit 31:30,        reserved
//Bit 29:16,        reg_dnr_stat_xst                                                          . unsigned  , default = 24
//Bit 15:14,        reserved
//Bit 13: 0,        reg_dnr_stat_xed                                                          . unsigned  , default = HSIZE - 25
#define DNR_STAT_Y_START_END                       ((0x2d09  << 2) + 0xff900000)
//Bit 31:30,        reserved
//Bit 29:16,        reg_dnr_stat_yst                                                          . unsigned  , default = 24
//Bit 15:14,        reserved
//Bit 13: 0,        reg_dnr_stat_yed                                                          . unsigned  , default = VSIZE - 25
#define DNR_LUMA                                   ((0x2d0a  << 2) + 0xff900000)
//Bit 31:27,        reserved
//Bit 26:24,        reg_dnr_luma_sqrtshft                       , left shift for fast squart of chroma, [0, 4]. unsigned  , default = 2
//Bit 23:21,        reserved
//Bit 20:16,        reg_dnr_luma_sqrtoffst                      , offset for fast squart of chroma. signed    , default = 0
//Bit 15,            reserved
//Bit 14:12,        reg_dnr_luma_wcmod                          , theta related to warm/cool segment line, 0: 0, 1: 45, 2: 90, 3: 135, 4: 180, 5: 225, 6: 270, 7: 315. . unsigned  , default = 3
//Bit 11: 8,        reg_dnr_luma_cshft                          , shift for calc. delta part, 0~8,  . unsigned  , default = 8
//Bit  7: 6,        reserved
//Bit  5: 0,        reg_dnr_luma_cgain                          , final gain for delta part, 32 normalized to "1". unsigned  , default = 4
#define DNR_DB_YEDGE_THD                           ((0x2d0b  << 2) + 0xff900000)
//Bit 31:24,        reg_dnr_db_yedgethd0                        , edge threshold0 for luma    . unsigned  , default = 12
//Bit 23:16,        reg_dnr_db_yedgethd1                        , edge threshold1 for luma    . unsigned  , default = 15
//Bit 15: 8,        reg_dnr_db_yedgethd2                        , edge threshold2 for luma    . unsigned  , default = 18
//Bit  7: 0,        reg_dnr_db_yedgethd3                        , edge threshold3 for luma    . unsigned  , default = 25
#define DNR_DB_CEDGE_THD                           ((0x2d0c  << 2) + 0xff900000)
//Bit 31:24,        reg_dnr_db_cedgethd0                        , edge threshold0 for chroma  . unsigned  , default = 12
//Bit 23:16,        reg_dnr_db_cedgethd1                        , edge threshold1 for chroma  . unsigned  , default = 15
//Bit 15: 8,        reg_dnr_db_cedgethd2                        , edge threshold2 for chroma  . unsigned  , default = 18
//Bit  7: 0,        reg_dnr_db_cedgethd3                        , edge threshold3 for chroma  . unsigned  , default = 25
#define DNR_DB_HGAP                                ((0x2d0d  << 2) + 0xff900000)
//Bit 31:24,        reserved
//Bit 23:16,        reg_dnr_db_hgapthd                          , horizontal gap thd (<=) for very sure blockiness . unsigned  , default = 8
//Bit 15: 8,        reg_dnr_db_hgapdifthd                       , dif thd between hgap and lft/rgt hdifs. unsigned  , default = 1
//Bit  7: 1,        reserved
//Bit  0,            reg_dnr_db_hgapmod                          , horizontal gap calc. mode, 0: just use current col x, 1: find max between (x-1, x, x+1) . unsigned  , default = 0
#define DNR_DB_HBS                                 ((0x2d0e  << 2) + 0xff900000)
//Bit 31: 6,        reserved
//Bit  5: 4,        reg_dnr_db_hbsup                            , horizontal bs up value      . unsigned  , default = 1
//Bit  3: 2,        reg_dnr_db_hbsmax                           , max value of hbs for global control. unsigned  , default = 3
//Bit  1: 0,        reg_dnr_db_hgbsthd                          , gbs thd (>=) for hbs calc.  . unsigned  , default = 1
#define DNR_DB_HACT                                ((0x2d0f  << 2) + 0xff900000)
//Bit 31:16,        reserved
//Bit 15: 8,        reg_dnr_db_hactthd0                         , thd0 of hact, for block classification. unsigned  , default = 10
//Bit  7: 0,        reg_dnr_db_hactthd1                         , thd1 of hact, for block classification. unsigned  , default = 32
#define DNR_DB_YHDELTA_GAIN                        ((0x2d10  << 2) + 0xff900000)
//Bit 31:27,        reserved
//Bit 26:24,        reg_dnr_db_yhdeltagain1                     , (p1-q1) gain for Y's delta calc. when bs=1, normalized 8 as "1" . unsigned  , default = 2
//Bit 23,            reserved
//Bit 22:20,        reg_dnr_db_yhdeltagain2                     , (p1-q1) gain for Y's delta calc. when bs=2, normalized 8 as "1" . unsigned  , default = 0
//Bit 19,            reserved
//Bit 18:16,        reg_dnr_db_yhdeltagain3                     , (p1-q1) gain for Y's delta calc. when bs=3, normalized 8 as "1" . unsigned  , default = 0
//Bit 15,            reserved
//Bit 14: 8,        reg_dnr_db_yhdeltaadjoffst                  , offset for adjust Y's hdelta (-64, 63). signed    , default = 0
//Bit  7: 6,        reserved
//Bit  5: 0,        reg_dnr_db_yhdeltaadjgain                   , gain for adjust Y's hdelta, normalized 32 as "1" . unsigned  , default = 32
#define DNR_DB_YHDELTA2_GAIN                       ((0x2d11  << 2) + 0xff900000)
//Bit 31:30,        reserved
//Bit 29:24,        reg_dnr_db_yhdelta2gain2                    , gain for bs=2's adjust Y's hdelta2, normalized 64 as "1" . unsigned  , default = 8
//Bit 23:21,        reserved
//Bit 20:16,        reg_dnr_db_yhdelta2offst2                   , offset for bs=2's adjust Y's hdelta2 (-16, 15). signed    , default = 0
//Bit 15:14,        reserved
//Bit 13: 8,        reg_dnr_db_yhdelta2gain3                    , gain for bs=3's adjust Y's hdelta2, normalized 64 as "1" . unsigned  , default = 4
//Bit  7: 5,        reserved
//Bit  4: 0,        reg_dnr_db_yhdelta2offst3                   , offset for bs=3's adjust Y's hdelta2 (-16, 15). signed    , default = 0
#define DNR_DB_CHDELTA_GAIN                        ((0x2d12  << 2) + 0xff900000)
//Bit 31:27,        reserved
//Bit 26:24,        reg_dnr_db_chdeltagain1                     , (p1-q1) gain for UV's delta calc. when bs=1, normalized 8 as "1". unsigned  , default = 2
//Bit 23,            reserved
//Bit 22:20,        reg_dnr_db_chdeltagain2                     , (p1-q1) gain for UV's delta calc. when bs=2, normalized 8 as "1". unsigned  , default = 0
//Bit 19,            reserved
//Bit 18:16,        reg_dnr_db_chdeltagain3                     , (p1-q1) gain for UV's delta calc. when bs=3, normalized 8 as "1". unsigned  , default = 0
//Bit 15,            reserved
//Bit 14: 8,        reg_dnr_db_chdeltaadjoffst                  , offset for adjust UV's hdelta (-64, 63). signed    , default = 0
//Bit  7: 6,        reserved
//Bit  5: 0,        reg_dnr_db_chdeltaadjgain                   , gain for adjust UV's hdelta, normalized 32 as "1". unsigned  , default = 32
#define DNR_DB_CHDELTA2_GAIN                       ((0x2d13  << 2) + 0xff900000)
//Bit 31:30,        reserved
//Bit 29:24,        reg_dnr_db_chdelta2gain2                    , gain for bs=2's adjust UV's hdelta2, normalized 64 as "1" . unsigned  , default = 8
//Bit 23:21,        reserved
//Bit 20:16,        reg_dnr_db_chdelta2offst2                   , offset for bs=2's adjust UV's hdelta2 (-16, 15). signed    , default = 0
//Bit 15:14,        reserved
//Bit 13: 8,        reg_dnr_db_chdelta2gain3                    , gain for bs=2's adjust UV's hdelta2, normalized 64 as "1" . unsigned  , default = 4
//Bit  7: 5,        reserved
//Bit  4: 0,        reg_dnr_db_chdelta2offst3                   , offset for bs=2's adjust UV's hdelta2 (-16, 15). signed    , default = 0
#define DNR_DB_YC_VEDGE_THD                        ((0x2d14  << 2) + 0xff900000)
//Bit 31:16,        reserved
//Bit 15: 8,        reg_dnr_db_yvedgethd                        , special Y's edge thd for vdb. unsigned  , default = 12
//Bit  7: 0,        reg_dnr_db_cvedgethd                        , special UV's edge thd for vdb. unsigned  , default = 12
#define DNR_DB_VBS_MISC                            ((0x2d15  << 2) + 0xff900000)
//Bit 31:24,        reg_dnr_db_vgapthd                          , vertical gap thd (<=) for very sure blockiness . unsigned  , default = 8
//Bit 23:16,        reg_dnr_db_vactthd                          , thd of vact, for block classification . unsigned  , default = 10
//Bit 15: 8,        reg_dnr_db_vgapdifthd                       , dif thd between vgap and vact. unsigned  , default = 4
//Bit  7: 4,        reserved
//Bit  3: 2,        reg_dnr_db_vbsmax                           , max value of vbs for global control. unsigned  , default = 2
//Bit  1: 0,        reg_dnr_db_vgbsthd                          , gbs thd (>=) for vbs calc.  . unsigned  , default = 1
#define DNR_DB_YVDELTA_GAIN                        ((0x2d16  << 2) + 0xff900000)
//Bit 31:30,        reserved
//Bit 29:24,        reg_dnr_db_yvdeltaadjgain                   , gain for adjust Y's vdelta, normalized 32 as "1". unsigned  , default = 32
//Bit 23,            reserved
//Bit 22:16,        reg_dnr_db_yvdeltaadjoffst                  , offset for adjust Y's vdelta (-64, 63). signed    , default = 0
//Bit 15:14,        reserved
//Bit 13: 8,        reg_dnr_db_yvdelta2gain                     , gain for adjust Y's vdelta2, normalized 64 as "1". unsigned  , default = 8
//Bit  7: 5,        reserved
//Bit  4: 0,        reg_dnr_db_yvdelta2offst                    , offset for adjust Y's vdelta2 (-16, 15). signed    , default = 0
#define DNR_DB_CVDELTA_GAIN                        ((0x2d17  << 2) + 0xff900000)
//Bit 31:30,        reserved
//Bit 29:24,        reg_dnr_db_cvdeltaadjgain                   , gain for adjust UV's vdelta, normalized 32 as "1". unsigned  , default = 32
//Bit 23,            reserved
//Bit 22:16,        reg_dnr_db_cvdeltaadjoffst                  , offset for adjust UV's vdelta (-64, 63). signed    , default = 0
//Bit 15:14,        reserved
//Bit 13: 8,        reg_dnr_db_cvdelta2gain                     , gain for adjust UV's vdelta2, normalized 64 as "1". unsigned  , default = 8
//Bit  7: 5,        reserved
//Bit  4: 0,        reg_dnr_db_cvdelta2offst                    , offset for adjust UV's vdelta2 (-16, 15). signed    , default = 0
#define DNR_RO_GBS_STAT_LR                         ((0x2d18  << 2) + 0xff900000)
//Bit 31: 0,        ro_gbs_stat_lr                                                            . unsigned  , default = 0
#define DNR_RO_GBS_STAT_LL                         ((0x2d19  << 2) + 0xff900000)
//Bit 31: 0,        ro_gbs_stat_ll                                                            . unsigned  , default = 0
#define DNR_RO_GBS_STAT_RR                         ((0x2d1a  << 2) + 0xff900000)
//Bit 31: 0,        ro_gbs_stat_rr                                                            . unsigned  , default = 0
#define DNR_RO_GBS_STAT_DIF                        ((0x2d1b  << 2) + 0xff900000)
//Bit 31: 0,        ro_gbs_stat_dif                                                           . unsigned  , default = 0
#define DNR_RO_GBS_STAT_CNT                        ((0x2d1c  << 2) + 0xff900000)
//Bit 31: 0,        ro_gbs_stat_cnt                                                           . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_0                     ((0x2d1d  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt0                                                         . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_1                     ((0x2d1e  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt1                                                         . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_2                     ((0x2d1f  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt2                                                         . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_3                     ((0x2d20  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt3                                                         . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_4                     ((0x2d21  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt4                                                         . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_5                     ((0x2d22  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt5                                                         . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_6                     ((0x2d23  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt6                                                         . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_7                     ((0x2d24  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt7                                                         . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_8                     ((0x2d25  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt8                                                         . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_9                     ((0x2d26  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt9                                                         . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_10                    ((0x2d27  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt10                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_11                    ((0x2d28  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt11                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_12                    ((0x2d29  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt12                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_13                    ((0x2d2a  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt13                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_14                    ((0x2d2b  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt14                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_15                    ((0x2d2c  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt15                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_16                    ((0x2d2d  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt16                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_17                    ((0x2d2e  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt17                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_18                    ((0x2d2f  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt18                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_19                    ((0x2d30  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt19                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_20                    ((0x2d31  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt20                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_21                    ((0x2d32  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt21                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_22                    ((0x2d33  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt22                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_23                    ((0x2d34  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt23                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_24                    ((0x2d35  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt24                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_25                    ((0x2d36  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt25                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_26                    ((0x2d37  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt26                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_27                    ((0x2d38  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt27                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_28                    ((0x2d39  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt28                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_29                    ((0x2d3a  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt29                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_30                    ((0x2d3b  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt30                                                        . unsigned  , default = 0
#define DNR_RO_HBOF_STAT_CNT_31                    ((0x2d3c  << 2) + 0xff900000)
//Bit 31: 0,        ro_hbof_stat_cnt31                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_0                     ((0x2d3d  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt0                                                         . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_1                     ((0x2d3e  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt1                                                         . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_2                     ((0x2d3f  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt2                                                         . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_3                     ((0x2d40  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt3                                                         . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_4                     ((0x2d41  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt4                                                         . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_5                     ((0x2d42  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt5                                                         . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_6                     ((0x2d43  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt6                                                         . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_7                     ((0x2d44  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt7                                                         . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_8                     ((0x2d45  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt8                                                         . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_9                     ((0x2d46  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt9                                                         . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_10                    ((0x2d47  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt10                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_11                    ((0x2d48  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt11                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_12                    ((0x2d49  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt12                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_13                    ((0x2d4a  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt13                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_14                    ((0x2d4b  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt14                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_15                    ((0x2d4c  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt15                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_16                    ((0x2d4d  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt16                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_17                    ((0x2d4e  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt17                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_18                    ((0x2d4f  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt18                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_19                    ((0x2d50  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt19                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_20                    ((0x2d51  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt20                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_21                    ((0x2d52  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt21                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_22                    ((0x2d53  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt22                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_23                    ((0x2d54  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt23                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_24                    ((0x2d55  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt24                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_25                    ((0x2d56  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt25                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_26                    ((0x2d57  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt26                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_27                    ((0x2d58  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt27                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_28                    ((0x2d59  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt28                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_29                    ((0x2d5a  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt29                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_30                    ((0x2d5b  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt30                                                        . unsigned  , default = 0
#define DNR_RO_VBOF_STAT_CNT_31                    ((0x2d5c  << 2) + 0xff900000)
//Bit 31: 0,        ro_vbof_stat_cnt31                                                        . unsigned  , default = 0
#define DNR_DM_CTRL                                ((0x2d60  << 2) + 0xff900000)
//Bit 31:13,        reserved
//Bit 12,            reg_dnr_dm_fedgeflg_en                      , enable edge flag calc. of each frame. unsigned  , default = 1
//Bit 11,            reg_dnr_dm_fedgeflg_cl                      , clear frame edge flag if needed. unsigned  , default = 1
//Bit 10,            reg_dnr_dm_fedgeflg_df                      , user defined edge when reg_dnr_dm_fedgeflg_en=0, default = 1
//Bit  9,            reg_dnr_dm_en                               , enable demosquito function  . unsigned  , default = 1
//Bit  8,            reg_dnr_dm_chrmen                           , enable chrome processing for demosquito. unsigned  , default = 1
//Bit  7: 6,        reg_dnr_dm_level                            , demosquito level            . unsigned  , default = 3
//Bit  5: 4,        reg_dnr_dm_leveldw0                         , level down when gbs is small. unsigned  , default = 1
//Bit  3: 2,        reg_dnr_dm_leveldw1                         , level down for no edge/flat blocks. unsigned  , default = 1
//Bit  1: 0,        reg_dnr_dm_gbsthd                           , small/large threshold for gbs (<=). unsigned  , default = 0
#define DNR_DM_NR_BLND                             ((0x2d61  << 2) + 0xff900000)
//Bit 31:25,        reserved
//Bit 24,            reg_dnr_dm_defalpen                         , enable user define alpha for dm & nr blend. unsigned  , default = 0
//Bit 23:16,        reg_dnr_dm_defalp                           , user define alpha for dm & nr blend if enable. unsigned  , default = 0
//Bit 15:14,        reserved
//Bit 13: 8,        reg_dnr_dm_alpgain                          , gain for nr/dm alpha, normalized 32 as "1". unsigned  , default = 32
//Bit  7: 0,        reg_dnr_dm_alpoffst                         , (-128, 127), offset for nr/dm alpha. signed    , default = 0
#define DNR_DM_RNG_THD                             ((0x2d62  << 2) + 0xff900000)
//Bit 31:24,        reserved
//Bit 23:16,        reg_dnr_dm_rngminthd                                                      . unsigned  , default = 2
//Bit 15: 8,        reg_dnr_dm_rngmaxthd                                                      . unsigned  , default = 64
//Bit  7: 0,        reg_dnr_dm_rngdifthd                                                      . unsigned  , default = 4
#define DNR_DM_RNG_GAIN_OFST                       ((0x2d63  << 2) + 0xff900000)
//Bit 31:14,        reserved
//Bit 13: 8,        reg_dnr_dm_rnggain                          , normalized 16 as "1"        . unsigned  , default = 16
//Bit  7: 6,        reserved
//Bit  5: 0,        reg_dnr_dm_rngofst                                                        . unsigned  , default = 0
#define DNR_DM_DIR_MISC                            ((0x2d64  << 2) + 0xff900000)
//Bit 31:30,        reserved
//Bit 29,            reg_dnr_dm_diralpen                                                       . unsigned  , default = 1
//Bit 28:24,        reg_dnr_dm_diralpgain                                                     . unsigned  , default = 0
//Bit 23:22,        reserved
//Bit 21:16,        reg_dnr_dm_diralpofst                                                     . unsigned  , default = 0
//Bit 15:13,        reserved
//Bit 12: 8,        reg_dnr_dm_diralpmin                                                      . unsigned  , default = 0
//Bit  7: 5,        reserved
//Bit  4: 0,        reg_dnr_dm_diralpmax                                                      . unsigned  , default = 31
#define DNR_DM_COR_DIF                             ((0x2d65  << 2) + 0xff900000)
//Bit 31: 4,        reserved
//Bit  3: 1,        reg_dnr_dm_cordifshft                                                     . unsigned  , default = 3
//Bit  0,            reg_dnr_dm_cordifmod                        , 0:use max dir dif as cordif, 1: use max3x3 - min3x3 as cordif. unsigned  , default = 1
#define DNR_DM_FLT_THD                             ((0x2d66  << 2) + 0xff900000)
//Bit 31:24,        reg_dnr_dm_fltthd00                         , block flat threshold0 for block average difference when gbs is small, for flat block detection. unsigned  , default = 4
//Bit 23:16,        reg_dnr_dm_fltthd01                         , block flat threshold1 for block average difference when gbs is small, for flat block detection. unsigned  , default = 6
//Bit 15: 8,        reg_dnr_dm_fltthd10                         , block flat threshold0 for block average difference when gbs is large, for flat block detection. unsigned  , default = 9
//Bit  7: 0,        reg_dnr_dm_fltthd11                         , block flat threshold1 for block average difference when gbs is large, for flat block detection. unsigned  , default = 12
#define DNR_DM_VAR_THD                             ((0x2d67  << 2) + 0xff900000)
//Bit 31:24,        reg_dnr_dm_varthd00                         , block variance threshold0 (>=) when gbs is small, for flat block detection. unsigned  , default = 2
//Bit 23:16,        reg_dnr_dm_varthd01                         , block variance threshold1 (<=) when gbs is small, for flat block detection. unsigned  , default = 15
//Bit 15: 8,        reg_dnr_dm_varthd10                         , block variance threshold0 (>=) when gbs is large, for flat block detection. unsigned  , default = 3
//Bit  7: 0,        reg_dnr_dm_varthd11                         , block variance threshold1 (<=) when gbs is large, for flat block detection. unsigned  , default = 24
#define DNR_DM_EDGE_DIF_THD                        ((0x2d68  << 2) + 0xff900000)
//Bit 31:24,        reg_dnr_dm_edgethd0                         , block edge threshold (<=) when gbs is small, for flat block detection. unsigned  , default = 32
//Bit 23:16,        reg_dnr_dm_edgethd1                         , block edge threshold (<=) when gbs is large, for flat block detection. unsigned  , default = 48
//Bit 15: 8,        reg_dnr_dm_difthd0                          , block dif threshold (<=) when gbs is small, for flat block detection. unsigned  , default = 48
//Bit  7: 0,        reg_dnr_dm_difthd1                          , block dif threshold (<=) when gbs is large, for flat block detection. unsigned  , default = 64
#define DNR_DM_AVG_THD                             ((0x2d69  << 2) + 0xff900000)
//Bit 31:16,        reserved
//Bit 15: 8,        reg_dnr_dm_avgthd0                          , block average threshold (>=), for flat block detection. unsigned  , default = 160
//Bit  7: 0,        reg_dnr_dm_avgthd1                          , block average threshold (<=), for flat block detection. unsigned  , default = 128
#define DNR_DM_AVG_VAR_DIF_THD                     ((0x2d6a  << 2) + 0xff900000)
//Bit 31:16,        reserved
//Bit 15: 8,        reg_dnr_dm_avgdifthd                        , block average dif threshold (<) between cur and up block, for flat block detection. unsigned  , default = 12
//Bit  7: 0,        reg_dnr_dm_vardifthd                        , block variance dif threshold (>=) between cur and up block, for flat block detection. unsigned  , default = 1
#define DNR_DM_VAR_EDGE_DIF_THD2                   ((0x2d6b  << 2) + 0xff900000)
//Bit 31:24,        reserved
//Bit 23:16,        reg_dnr_dm_varthd2                          , block variance threshold (>=), for edge block detection. unsigned  , default = 24
//Bit 15: 8,        reg_dnr_dm_edgethd2                         , block edge threshold (>=), for edge block detection. unsigned  , default = 40
//Bit  7: 0,        reg_dnr_dm_difthd2                          , block dif threshold (>=), for edge block detection. unsigned  , default = 80
#define DNR_DM_DIF_FLT_MISC                        ((0x2d6c  << 2) + 0xff900000)
//Bit 31:28,        reg_dnr_dm_ldifoob                          , pre-defined large dif when pixel out of blocks. unsigned  , default = 0
//Bit 27:24,        reg_dnr_dm_bdifoob                          , pre-defined block dif when pixel out of blocks;. unsigned  , default = 0
//Bit 23:16,        reg_dnr_dm_fltalp                           , pre-defined alpha for dm and nr blending, when block is flat with mos.. unsigned  , default = 200
//Bit 15:12,        reserved
//Bit 11: 8,        reg_dnr_dm_fltminbdif                       , pre-defined min block dif for dm filter, when block is flat with mos.. unsigned  , default = 12
//Bit  7,            reserved
//Bit  6: 2,        reg_dnr_dm_difnormgain                      , gain for pixel dif normalization for dm filter, normalized 16 as "1". unsigned  , default = 16
//Bit  1,            reg_dnr_dm_difnormen                        , enable pixel dif normalization for dm filter. unsigned  , default = 1
//Bit  0,            reg_dnr_dm_difupden                         , enable block dif update using max of left, cur, right difs. unsigned  , default = 0
#define DNR_DM_SDIF_LUT0_2                         ((0x2d6d  << 2) + 0xff900000)
//Bit 31:21,        reserved
//Bit 20:16,        reg_dnr_dm_sdiflut0                         , normally 0-16               . unsigned  , default = 16
//Bit 15:13,        reserved
//Bit 12: 8,        reg_dnr_dm_sdiflut1                         , normally 0-16               . unsigned  , default = 14
//Bit  7: 5,        reserved
//Bit  4: 0,        reg_dnr_dm_sdiflut2                         , normally 0-16               . unsigned  , default = 13
#define DNR_DM_SDIF_LUT3_5                         ((0x2d6e  << 2) + 0xff900000)
//Bit 31:21,        reserved
//Bit 20:16,        reg_dnr_dm_sdiflut3                         , normally 0-16               . unsigned  , default = 10
//Bit 15:13,        reserved
//Bit 12: 8,        reg_dnr_dm_sdiflut4                         , normally 0-16               . unsigned  , default = 7
//Bit  7: 5,        reserved
//Bit  4: 0,        reg_dnr_dm_sdiflut5                         , normally 0-16               . unsigned  , default = 5
#define DNR_DM_SDIF_LUT6_8                         ((0x2d6f  << 2) + 0xff900000)
//Bit 31:21,        reserved
//Bit 20:16,        reg_dnr_dm_sdiflut6                         , normally 0-16               . unsigned  , default = 3
//Bit 15:13,        reserved
//Bit 12: 8,        reg_dnr_dm_sdiflut7                         , normally 0-16               . unsigned  , default = 1
//Bit  7: 5,        reserved
//Bit  4: 0,        reg_dnr_dm_sdiflut8                         , normally 0-16               . unsigned  , default = 0
#define DNR_DM_LDIF_LUT0_2                         ((0x2d70  << 2) + 0xff900000)
//Bit 31:21,        reserved
//Bit 20:16,        reg_dnr_dm_ldiflut0                         , normally 0-16               . unsigned  , default = 0
//Bit 15:13,        reserved
//Bit 12: 8,        reg_dnr_dm_ldiflut1                         , normally 0-16               . unsigned  , default = 4
//Bit  7: 5,        reserved
//Bit  4: 0,        reg_dnr_dm_ldiflut2                         , normally 0-16               . unsigned  , default = 12
#define DNR_DM_LDIF_LUT3_5                         ((0x2d71  << 2) + 0xff900000)
//Bit 31:21,        reserved
//Bit 20:16,        reg_dnr_dm_ldiflut3                         , normally 0-16               . unsigned  , default = 14
//Bit 15:13,        reserved
//Bit 12: 8,        reg_dnr_dm_ldiflut4                         , normally 0-16               . unsigned  , default = 15
//Bit  7: 5,        reserved
//Bit  4: 0,        reg_dnr_dm_ldiflut5                         , normally 0-16               . unsigned  , default = 16
#define DNR_DM_LDIF_LUT6_8                         ((0x2d72  << 2) + 0xff900000)
//Bit 31:21,        reserved
//Bit 20:16,        reg_dnr_dm_ldiflut6                         , normally 0-16               . unsigned  , default = 16
//Bit 15:13,        reserved
//Bit 12: 8,        reg_dnr_dm_ldiflut7                         , normally 0-16               . unsigned  , default = 16
//Bit  7: 5,        reserved
//Bit  4: 0,        reg_dnr_dm_ldiflut8                         , normally 0-16               . unsigned  , default = 16
#define DNR_DM_DIF2NORM_LUT0_2                     ((0x2d73  << 2) + 0xff900000)
//Bit 31:21,        reserved
//Bit 20:16,        reg_dnr_dm_dif2normlut0                     , normally 0-16               . unsigned  , default = 16
//Bit 15:13,        reserved
//Bit 12: 8,        reg_dnr_dm_dif2normlut1                     , normally 0-16               . unsigned  , default = 5
//Bit  7: 5,        reserved
//Bit  4: 0,        reg_dnr_dm_dif2normlut2                     , normally 0-16               . unsigned  , default = 3
#define DNR_DM_DIF2NORM_LUT3_5                     ((0x2d74  << 2) + 0xff900000)
//Bit 31:21,        reserved
//Bit 20:16,        reg_dnr_dm_dif2normlut3                     , normally 0-16               . unsigned  , default = 2
//Bit 15:13,        reserved
//Bit 12: 8,        reg_dnr_dm_dif2normlut4                     , normally 0-16               . unsigned  , default = 2
//Bit  7: 5,        reserved
//Bit  4: 0,        reg_dnr_dm_dif2normlut5                     , normally 0-16               . unsigned  , default = 1
#define DNR_DM_DIF2NORM_LUT6_8                     ((0x2d75  << 2) + 0xff900000)
//Bit 31:21,        reserved
//Bit 20:16,        reg_dnr_dm_dif2normlut6                     , normally 0-16               . unsigned  , default = 1
//Bit 15:13,        reserved
//Bit 12: 8,        reg_dnr_dm_dif2normlut7                     , normally 0-16               . unsigned  , default = 1
//Bit  7: 5,        reserved
//Bit  4: 0,        reg_dnr_dm_dif2normlut8                     , normally 0-16               . unsigned  , default = 1
#define DNR_DM_GMS_THD                             ((0x2d76  << 2) + 0xff900000)
//Bit 31:16,        reserved
//Bit 15: 8,        reg_gms_stat_thd0                                                         . unsigned  , default = 0
//Bit  7: 0,        reg_gms_stat_thd1                                                         . unsigned  , default = 128
#define DNR_RO_DM_GMS_STAT_CNT                     ((0x2d77  << 2) + 0xff900000)
//Bit 31: 0,        ro_dm_gms_stat_cnt                                                        . unsigned  , default = 0
#define DNR_RO_DM_GMS_STAT_MS                      ((0x2d78  << 2) + 0xff900000)
//Bit 31: 0,        ro_dm_gms_stat_ms                                                        . unsigned  , default = 0
// 0x80-0x90
//
// Reading file:  decomb_regs.h
//
#define DECOMB_DET_VERT_CON0                       ((0x2d80  << 2) + 0xff900000)
//Bit  31:24   reg_di_dcmb_det_vcon_thd0      default = 60  // u8
//Bit  23:16   reg_di_dcmb_det_vcon_thd1      default = 80  // u8
//Bit  15: 8   reg_di_dcmb_det_valp_lmt0      default = 63  // u8
//Bit   7: 0   reg_di_dcmb_det_valp_lmt1      default = 4   // u8
#define DECOMB_DET_VERT_CON1                       ((0x2d81  << 2) + 0xff900000)
//Bit  23:16   reg_di_dcmb_det_valp_lmt2      default = 0   // u8
//Bit  15: 8   reg_di_dcmb_det_vrate0         default = 32  // u8
//Bit   7: 0   reg_di_dcmb_det_vrate1         default = 4   // u8
#define DECOMB_DET_EDGE_CON0                       ((0x2d82  << 2) + 0xff900000)
//Bit  31:24   reg_di_dcmb_det_econ_thd0      default = 60  // u8
//Bit  23:16   reg_di_dcmb_det_econ_thd1      default = 80  // u8
//Bit  15: 8   reg_di_dcmb_det_ealp_lmt0      default = 63  // u8
//Bit   7: 0   reg_di_dcmb_det_ealp_lmt1      default = 4   // u8
#define DECOMB_DET_EDGE_CON1                       ((0x2d83  << 2) + 0xff900000)
//Bit  23:16   reg_di_dcmb_det_ealp_lmt2      default = 0   // u8
//Bit  15: 8   reg_di_dcmb_det_erate0         default = 32  // u8
//Bit   7: 0   reg_di_dcmb_det_erate1         default = 4  // u8
#define DECOMB_PARA                                ((0x2d84  << 2) + 0xff900000)
//Bit  31:30   reserved
//Bit  29:28   reg_di_dcmb_cmb_lpf            default = 1  // u2, 0:no lpf, 1:[1 2 1], 2,3: [1 2 2 2 1]
//Bit  27:26   reg_di_dcmb_vedge_chk          default = 0  // u2, vertical edge check, 0: no check, 1: vrt!=0, 2: vrt==3
//Bit  25:24   reg_di_dcmb_nedge_chk          default = 0  // u2, no idea edge check, 0, no check, 1, check
//Bit  23:20   reg_di_dcmb_edge_min           default = 0   // u4, min edge for edge cmb
//Bit  19:16   reg_di_dcmb_edge_max           default = 15  // u4, min edge for edge cmb
//Bit   15:8   reg_di_dcmb_bld_alp            default = 255  // u8, user defined alpha for di & decmb blend
//Bit    7:0   reg_di_dcmb_bld_alp_beta       default = 40  // u8, beta for mtn & cmb blend, for bld alpha calc.
#define DECOMB_BLND_CON0                           ((0x2d85  << 2) + 0xff900000)
//Bit  31:24   reg_di_dcmb_bld_con_thd0       default = 100  // u8
//Bit  23:16   reg_di_dcmb_bld_con_thd1       default = 120  // u8
//Bit  15: 8   reg_di_dcmb_bld_alp_lmt0       default = 0  // u8
//Bit   7: 0   reg_di_dcmb_bld_alp_lmt1       default = 128   // u8
#define DECOMB_BLND_CON1                           ((0x2d86  << 2) + 0xff900000)
//Bit  23:16   reg_di_dcmb_bld_alp_lmt2       default = 255   // u8
//Bit  15: 8   reg_di_dcmb_bld_rate0          default = 32 // u8
//Bit   7: 0   reg_di_dcmb_bld_rate1          default = 32  // u8
#define DECOMB_YC_THRD                             ((0x2d87  << 2) + 0xff900000)
//Bit  31:16   reserved
//Bit  15: 8   reg_di_dcmb_ythd               default = 2 // u8, default = 2
//Bit   7: 0   reg_di_dcmb_cthd               default = 2 // u8, default = 2
#define DECOMB_MTN_GAIN_OFST                       ((0x2d88  << 2) + 0xff900000)
//Bit  31:22   reserved
//Bit  21:16   reg_di_dcmb_mtn_alp_gain       default = 16  // u6, 16 is normalized to '1'
//Bit   15:9   reserved
//Bit    8:0   reg_di_dcmb_mtn_alp_ofst       default = 0  // s9, [-256, 255]
#define DECOMB_CMB_SEL_GAIN_OFST                   ((0x2d89  << 2) + 0xff900000)
//Bit  31:22   reserved
//Bit  21:16   reg_di_dcmb_cmb_sel_gain       default = 48  // u6, 16 is normalized to '1'
//Bit   15:9   reserved
//Bit    8:0   reg_di_dcmb_cmb_sel_ofst       default = 0  // s9, [-256, 255]
#define DECOMB_WIND00                              ((0x2d8a  << 2) + 0xff900000)
//Bit  31:29   reserved
//Bit  28:16   reg_di_dcmb_wnd00              default = 0 // u13, x0 for window 0, software control
//Bit  15:13   reserved
//Bit   12:0   reg_di_dcmb_wnd01              default = 719 // u13, x1 for window 0, HSIZE-1, software control
#define DECOMB_WIND01                              ((0x2d8b  << 2) + 0xff900000)
//Bit  31:29   reserved
//Bit  28:16   reg_di_dcmb_wnd02              default = 0 // u13, y0 for window 0, software control
//Bit  15:13   reserved
//Bit   12:0   reg_di_dcmb_wnd03              default = 39 // u13, y1 for window 0, software control
#define DECOMB_WIND10                              ((0x2d8c  << 2) + 0xff900000)
//Bit  31:29   reserved
//Bit  28:16   reg_di_dcmb_wnd10              default = 0 // u13, x0 for window 1, software control
//Bit  15:13   reserved
//Bit   12:0   reg_di_dcmb_wnd11              default = 719 // u13, x1 for window 1, HSIZE-1, software control
#define DECOMB_WIND11                              ((0x2d8d  << 2) + 0xff900000)
//Bit  31:29   reserved
//Bit  28:16   reg_di_dcmb_wnd12              default = 40 // u13, y0 for window 1, software control
//Bit  15:13   reserved
//Bit   12:0   reg_di_dcmb_wnd13              default = 239 // u13, y1 for window 1, VSIZE-1-40, software control
#define DECOMB_MODE                                ((0x2d8e  << 2) + 0xff900000)
//Bit  31:16   reserved
//Bit     15   reg_di_dcmb_is_cmb_bef         default = 1  // u1, 1: decide is_cmb before cmbing refine, 0: decide is_cmb after cmbing refine
//Bit     14   reg_di_dcmb_en0                default = 1 // u1, enable decmobing for wind0
//Bit     13   reg_di_dcmb_en1                default = 1 // u1, enable decmobing for wind1
//Bit     12   reg_di_dcmb_en2                default = 1 // u1, enable decmobing for wind2
//Bit  11:10   reg_di_dcmb_lpf_mod0           default = 2  // u2, get combing free pixels of wind0 by: 0, vertical lpf, 1, edge lpf, 2,3, ei data
//Bit    9:8   reg_di_dcmb_lpf_mod1           default = 2  // u2, get combing free pixels of wind1 by: 0, vertical lpf, 1, edge lpf, 2,3, ei data
//Bit    7:6   reg_di_dcmb_lpf_mod2           default = 0  // u2, get combing free pixels of wind2 by: 0, vertical lpf, 1, edge lpf, 2,3, ei data
//Bit      5   reg_di_dcmb_cmb_sel0           default = 1  // u1, wind0 decmb based on: 0, vert cmb, 1, edge cmb
//Bit      4   reg_di_dcmb_cmb_sel1           default = 1  // u1, wind1 decmb based on: 0, vert cmb, 1, edge cmb
//Bit      3   reg_di_dcmb_cmb_sel2           default = 0  // u1, wind2 decmb based on: 0, vert cmb, 1, edge cmb
//Bit      2   reg_di_dcmb_alp_mod0           default = 1  // u1, wind0 decmb alpha based on: 0, user-defined, 1, motion adaptive
//Bit      1   reg_di_dcmb_alp_mod1           default = 1  // u1, wind1 decmb alpha based on: 0, user-defined, 1, motion adaptive
//Bit      0   reg_di_dcmb_alp_mod2           default = 1  // u1, wind2 decmb alpha based on: 0, user-defined, 1, motion adaptive
#define DECOMB_FRM_SIZE                            ((0x2d8f  << 2) + 0xff900000)
//Bit  31:29   reserved
//Bit  28:16   hsize_in                       default = 1920  // u13, pic horz size in  unit: pixel
//Bit  15:13   reserved
//Bit   12:0   vsize_in                       default = 1080  // u13, pic vert size in  unit: pixel
#define DECOMB_HV_BLANK                            ((0x2d90  << 2) + 0xff900000)
//Bit  31:16   reserved
//Bit   15:8   hblank_num                     default = 20  // u8, hor blank time
//Bit    7:0   vblank_num                     default = 50  // u8, ver blank time
//
// Closing file:  decomb_regs.h
//
// 0x98-0xa3
//
// Reading file:  nr2_det_polar_regs.h
//
// synopsys translate_off
// synopsys translate_on
#define NR2_POLAR3_MODE                            ((0x2d98  << 2) + 0xff900000)
//Bit 31:20        reserved
//Bit 19:18        reg_polar3_f02lpf_mod0    // unsigned , default = 3  low pass filter mode for field 0 and field2 before polar3 detection; 0 for no lpf, 1: [1 2 1]/4 vert lpf; 2: [1 2 1; 2 4 2; 1 2 1]/16 2d lpf, p1 no hlpf; 2: [1 2 1; 2 4 2; 1 2 1]/16 2d lpf, p1 [1 2 1]/4 hlpf
//Bit 17:16        reg_polar3_f02lpf_mod1    // unsigned , default = 3  low pass filter mode for field 0 and field2 before polar3 detection; 0 for no lpf, 1: [1 2 1]/4 vert lpf; 2: [1 2 1; 2 4 2; 1 2 1]/16 2d lpf, p1 no hlpf; 2: [1 2 1; 2 4 2; 1 2 1]/16 2d lpf, p1 [1 2 1]/4 hlpf
//Bit 15: 8        reg_polar3_dif02_thrd0    // unsigned , default = 5  threshold of dif for polar3 detection except for 32 detection, only do polar3 detection on obvious motion, [0] for luma, 1[1] for chroma
//Bit  7: 0        reg_polar3_dif02_thrd1    // unsigned , default = 5  threshold of dif for polar3 detection except for 32 detection, only do polar3 detection on obvious motion, [0] for luma, 1[1] for chroma
#define NR2_POLAR3_THRD                            ((0x2d99  << 2) + 0xff900000)
//Bit 31:24        reg_polar3_txtf02_thrd0   // unsigned , default = 30  threshold to vertical f0f2 texture, if texture larger than this threshold, will not do the polar3 decision.
//Bit 23:16        reg_polar3_txtf02_thrd1   // unsigned , default = 30  threshold to vertical f0f2 texture, if texture larger than this threshold, will not do the polar3 decision.
//Bit 15: 8        reg_polar3_txtf1_thrd0    // unsigned , default = 20  threshold to vertical f1 texture, if texture larger than this threshold, will not do the polar3 decision.
//Bit  7: 0        reg_polar3_txtf1_thrd1    // unsigned , default = 20  threshold to vertical f1 texture, if texture larger than this threshold, will not do the polar3 decision.
#define NR2_POLAR3_PARA0                           ((0x2d9a  << 2) + 0xff900000)
//Bit 31:28        reg_polar3_rate00         // unsigned , default = 6  delt = rate*dif02/32, e.g. f2<f0, if f1 within((f0+f2)/2 - delt), ((f0+f2)/2 + delt), then polar3_smoothmv++;
//Bit 27:24        reg_polar3_rate01         // unsigned , default = 6  delt = rate*dif02/32, e.g. f2<f0, if f1 within((f0+f2)/2 - delt), ((f0+f2)/2 + delt), then polar3_smoothmv++;
//Bit 23:20        reg_polar3_rate10         // unsigned , default = 8  delt = rate*dif02/32, e.g. f2-ofst1<f0, if f1<((f0+f2)/2 - delt), then polar3_m1++; if f1>((f0+f2)/2 + delt), then polar3_p1++;
//Bit 19:16        reg_polar3_rate11         // unsigned , default = 8  delt = rate*dif02/32, e.g. f2-ofst1<f0, if f1<((f0+f2)/2 - delt), then polar3_m1++; if f1>((f0+f2)/2 + delt), then polar3_p1++;
//Bit 15:12        reg_polar3_rate20         // unsigned , default = 2  delt = rate*dif02/32, e.g. f2<f0, if f1<(f2 - delt- ofset2), then polar3_m2++; if f1>((f0 + delt+ ofset2), then polar3_p2++;
//Bit 11: 8        reg_polar3_rate21         // unsigned , default = 2  delt = rate*dif02/32, e.g. f2<f0, if f1<(f2 - delt- ofset2), then polar3_m2++; if f1>((f0 + delt+ ofset2), then polar3_p2++;
//Bit  7: 1        reserved
//Bit  0           reg_polar3_ro_reset       // unsigned , default = 0  reset signal of the polar3 read only registers
#define NR2_POLAR3_PARA1                           ((0x2d9b  << 2) + 0xff900000)
//Bit 31:24        reg_polar3_rate30         // unsigned , default = 48  delt = rate*dif02/32, e.g. f2<f0, if f1<(f2 - delt- ofset3) or f1>((f0 + delt+ofst3), then polar3_32++;
//Bit 23:16        reg_polar3_rate31         // unsigned , default = 48  delt = rate*dif02/32, e.g. f2<f0, if f1<(f2 - delt- ofset3) or f1>((f0 + delt+ofst3), then polar3_32++;
//Bit 15:12        reg_polar3_ofst30         // signed , default = 2  delt = rate*dif02/32, e.g. f2<f0, if f1<(f2 - delt-ofst3) or f1>((f0 + delt+ofst3), then polar3_32++;
//Bit 11: 8        reg_polar3_ofst31         // signed , default = 2  delt = rate*dif02/32, e.g. f2<f0, if f1<(f2 - delt-ofst3) or f1>((f0 + delt+ofst3), then polar3_32++;
//Bit  7: 4        reg_polar3_ofst20         // signed , default = 2  delt = rate*dif02/32, e.g. f2<f0, if f1<(f2 - delt- ofset2), then polar3_m2++; if f1>((f0 + delt+ ofset2), then polar3_p2++;
//Bit  3: 0        reg_polar3_ofst21         // signed , default = 2  delt = rate*dif02/32, e.g. f2<f0, if f1<(f2 - delt- ofset2), then polar3_m2++; if f1>((f0 + delt+ ofset2), then polar3_p2++;
#define NR2_POLAR3_CTRL                            ((0x2d9c  << 2) + 0xff900000)
//Bit 31:24        reg_polar3_ofst10         // signed , default = 1
//Bit 23:16        reg_polar3_ofst11         // signed , default = 1
//Bit 15: 8        reg_polar3_h_mute         // unsigned , default = 10  horizontal pixels to mute for left right sides for polar3 detection;
//Bit  7: 0        reg_polar3_v_mute         // unsigned , default = 10  vertical pixels to mute for top and bottom sides for polar3 detection;
#define NR2_RO_POLAR3_NUMOFPIX                     ((0x2d9d  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23: 0        ro_polar3_numofpix        // unsigned , default = 0  number of pixels detected as polar3
#define NR2_RO_POLAR3_SMOOTHMV                     ((0x2d9e  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23: 0        ro_polar3_smoothmv        // unsigned , default = 0  number of pixels with smooth mv, F(t) is close between avg of f(t-1) and f(t+1);
#define NR2_RO_POLAR3_M1                           ((0x2d9f  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23: 0        ro_polar3_m1              // unsigned , default = 0  number of pixels with F(t) is close to f(t-1) instead of f(t+1), but in between [f(t-1), f(t+1)];
#define NR2_RO_POLAR3_P1                           ((0x2da0  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23: 0        ro_polar3_p1              // unsigned , default = 0  number of pixels with F(t) is close to f(t+1) instead of f(t-1), but in between [f(t-1), f(t+1)];
#define NR2_RO_POLAR3_M2                           ((0x2da1  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23: 0        ro_polar3_m2              // unsigned , default = 0  number of pixels with F(t) is close to f(t-1) instead of f(t+1), but out side of (f(t-1), f(t+1));
#define NR2_RO_POLAR3_P2                           ((0x2da2  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23: 0        ro_polar3_p2              // unsigned , default = 0  number of pixels with F(t) is close to f(t+1) instead of f(t-1), but out side of (f(t-1), f(t+1));
#define NR2_RO_POLAR3_32                           ((0x2da3  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23: 0        ro_polar3_32              // unsigned , default = 0  number of pixels with F(t) far from [f(t-1),f(t+1)] and f(t-1) is close to f(t+1);
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  nr2_det_polar_regs.h
//
// 0xa4-0xf7 / 0xff
//
// Reading file:  nr4_regs.h
//
// synopsys translate_off
// synopsys translate_on
//========== nr4_drt_regs register begin ==========//
#define NR4_DRT_CTRL                               ((0x2da4  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_ydrt_3line_ssd_gain    // unsigned , default = 16  gain to max ssd normalized 16 as '1'
//Bit 23:16        reg_nr4_ydrt_5line_ssd_gain    // unsigned , default = 16  gain to max ssd normalized 16 as '1'
//Bit 15            reserved
//Bit 14:13        reg_nr4_drt_yhsad_mode         // unsigned , default = 1  mode for luma horiztonal sad calc., 0: no vertical lpf, 1: vertical [1 2 1], 2 or 3: vertical [ 1 2 2 2 1] if 5 lines
//Bit 12:11        reg_nr4_drt_chsad_mode         // unsigned , default = 1  mode for chroma horiztonal sad calc., 0: no vertical lpf, 1: vertical [1 2 1], 2 or 3: vertical [ 1 2 2 2 1] if 5 lines
//Bit 10           reg_nr4_drt_yhsad_hlpf         // unsigned , default = 1  hlpf for luma hsad of drt calculation, 0: no lpf, 1: with [1 2 1] hlpf
//Bit  9           reg_nr4_drt_yvsad_hlpf         // unsigned , default = 1  hlpf for luma vsad of drt calculation, 0: no lpf, 1: with [1 2 1] hlpf
//Bit  8           reg_nr4_drt_ydsad_hlpf         // unsigned , default = 1  hlpf for luma dsad of drt calculation, 0: no lpf, 1: with [1 2 1] hlpf
//Bit  7           reg_nr4_drt_chsad_hlpf         // unsigned , default = 1  hlpf for chrome hsad of drt calculation, 0: no lpf, 1: with [1 2 1] hlpf
//Bit  6           reg_nr4_drt_cvsad_hlpf         // unsigned , default = 1  hlpf for chroma vsad of drt calculation, 0: no lpf, 1: with [1 2 1] hlpf
//Bit  5           reg_nr4_drt_cdsad_hlpf         // unsigned , default = 1  hlpf for chroma dsad of drt calculation, 0: no lpf, 1: with [1 2 1] hlpf
//Bit  4           reg_nr4_ydrt_dif_mode          // unsigned , default = 1  0:y_dif, 1: y_dif + (u_dif + v_dif)/2
//Bit  3: 2        reg_nr4_cdrt_dif_mode          // unsigned , default = 2  0:(u_dif + v_dif), 1: y_dif/4 + (u_dif + v_dif)*3/4, 2:y_dif/2 + (u_dif + v_dif)/2, 3: y_dif (not recommended)
//Bit  1: 0        reserved
#define NR4_DRT_YSAD_GAIN                          ((0x2da5  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_ysad_hrz_gain           // unsigned , default = 16  gain for horizontal sad, 16 normalized to "1"
//Bit 23:16        reg_nr4_ysad_diag_gain          // unsigned , default = 20  gain for diagonal sad, 16 normalized to "1"
//Bit 15: 8        reg_nr4_ysad_vrt_gain           // unsigned , default = 16  gain for vertical sad, 16 normalized to "1"
//Bit  7: 6        reserved
//Bit  5: 0        reg_nr4_drt_ysad_core_rate      // unsigned , default = 6  rate of coring for sad(theta) - sad(theta+pi/2)*rate/64
#define NR4_DRT_CSAD_GAIN                          ((0x2da6  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_csad_hrz_gain           // unsigned , default = 16  gain for horizontal sad, 16 normalized to "1"
//Bit 23:16        reg_nr4_csad_diag_gain          // unsigned , default = 20  gain for diagonal sad, 16 normalized to "1"
//Bit 15: 8        reg_nr4_csad_vrt_gain           // unsigned , default = 16  gain for vertical sad, 16 normalized to "1"
//Bit  7: 6        reserved
//Bit  5: 0        reg_nr4_drt_csad_core_rate      // unsigned , default = 6  rate of coring for sad(theta) - sad(theta+pi/2)*rate/64
#define NR4_DRT_SAD_ALP_CORE                       ((0x2da7  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:20        reg_nr4_ydrt_alp_core_rate     // unsigned , default = 0  luma ratio to min_err, alpha = (min_err - (max_err - min_err)*rate + ofst)/max_err * 64; dft = 0/32
//Bit 19:16        reg_nr4_cdrt_alp_core_rate     // unsigned , default = 0  chroma ratio to min_err, alpha = (min_err - (max_err - min_err)*rate + ofst)/max_err * 64; dft = 0/32
//Bit 15:14        reserved
//Bit 13: 8        reg_nr4_ydrt_alp_core_ofst     // unsigned , default = 10  luma offset to min_err, alpha = (min_err - (max_err - min_err)*rate + ofst)/max_err * 64; dft = 10
//Bit  7: 6        reserved
//Bit  5: 0        reg_nr4_cdrt_alp_core_ofst     // unsigned , default = 10  chroma offset to min_err, alpha = (min_err - (max_err - min_err)*rate + ofst)/max_err * 64; dft = 10
#define NR4_DRT_ALP_MINMAX                         ((0x2da8  << 2) + 0xff900000)
//Bit 31:30        reserved
//Bit 29:24        reg_nr4_ydrt_alp_min           // unsigned , default = 0  luma min value of alpha, dft = 0
//Bit 23:22        reserved
//Bit 21:16        reg_nr4_ydrt_alp_max           // unsigned , default = 63  luma max value of alpha, dft = 63
//Bit 15:14        reserved
//Bit 13: 8        reg_nr4_cdrt_alp_min           // unsigned , default = 0  chroma min value of alpha, dft = 0
//Bit  7: 6        reserved
//Bit  5: 0        reg_nr4_cdrt_alp_max           // unsigned , default = 63  chroma max value of alpha, dft = 63
//========== nr4_drt_regs register end ==========//
//========== nr4_snr_regs register begin ==========//
#define NR4_SNR_CTRL_REG                           ((0x2da9  << 2) + 0xff900000)
//Bit 31:13        reserved
//Bit 12           reg_nr4_bet2_sel              // unsigned , default = 1
//Bit 11: 9        reg_nr4_snr2_sel_mode         // unsigned , default = 0  0: no filter, 1: adpgau, adp_drt_lpf blend; 2: adpgau, drt4_lpf blend; 3: adp_drt_lpf method, 4: drt4_lpf method, 5: adp_drt_                                                             //original image blend, 6: drt4_lpf, original image blend, 7: adpgau method; dft=1
//Bit  8           reg_nr4_snr2_gaulpf_mode      // unsigned , default = 1    0: 3*5 or 5*5 gaussian lpf;  1: 3*3 (window size) gaussian lpf;   dft=1
//Bit  7: 6        reg_nr4_snr2_alpha0_sad_mode  // unsigned , default = 3  0: max_sad*max_ssd;  1: max_sad*max_sad; 2: adp_max_sad*max_ssd; 3: adp_max_sad*adp_max_sad  dft=3
//Bit  5: 4        reg_nr4_snr2_alpha1_sad_mode  // unsigned , default = 2  0: max_sad;  1: cross_max_sad; 2 or 3: adp_sad  dft=2
//Bit  3: 2        reserved
//Bit  1: 0        reg_nr4_snr2_adp_drtlpf_mode  // unsigned , default = 3  0: adp_drtlpf [2 1 1]/4, 1: adp_drtlpf [4 2 1 1]/8; 2: adp_drtlpf [2 2 2 1 1]/8; 3: adp_drtlpf [7 7 7 6 5]/32;  dft=3;
#define NR4_SNR_ALPHA0_MAX_MIN                     ((0x2daa  << 2) + 0xff900000)
//Bit 31:30        reserved
//Bit 29:23        reg_nr4_snr2_alp0_ymin    // unsigned , default = 127  normalized to 128 as '1'
//Bit 22:16        reg_nr4_snr2_alp0_ymax    // unsigned , default = 127  normalized to 128 as '1'
//Bit 15:14        reserved
//Bit 13: 7        reg_nr4_snr2_alp0_cmin    // unsigned , default = 127  normalized to 128 as '1'
//Bit  6: 0        reg_nr4_snr2_alp0_cmax    // unsigned , default = 127  normalized to 128 as '1'
#define NR4_ALP0C_ERR2CURV_LIMIT0                  ((0x2dab  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_snr2_alp0_minerr_cpar0  // unsigned , default = 0  threshold0 of curve to map mierr to alp0 for chroma channel, this will be set value of flat region mierr that no need blur.
//Bit 23:16        reg_nr4_snr2_alp0_minerr_cpar1  // unsigned , default = 25  threshold1 of curve to map mierr to alp0 for chroma channel,this will be set value of texture region mierr that can not blur.
//Bit 15: 8        reg_nr4_snr2_alp0_minerr_cpar5  // unsigned , default = 40  rate0 (for mierr<th0) of curve to map mierr to alp0 for chroma channel. the larger of the value, the deep of the slope. 0~255.
//Bit  7: 0        reg_nr4_snr2_alp0_minerr_cpar6  // unsigned , default = 40  rate1 (for mierr>th1) of curve to map mierr to alp0 for chroma channel. the larger of the value, the deep of the slope. 0~255.
#define NR4_ALP0C_ERR2CURV_LIMIT1                  ((0x2dac  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:16        reg_nr4_snr2_alp0_minerr_cpar2  // unsigned , default = 127  level limit(for mierr<th0) of curve to map mierr to alp0 for chroma channel, that we can do for flat region. 0~255.
//Bit 15: 8        reg_nr4_snr2_alp0_minerr_cpar3  // unsigned , default = 0  level limit(for th0<mierr<th1) of curve to map mierr to alp0 for chroma channel, that we can do for misc region. 0~255.
//Bit  7: 0        reg_nr4_snr2_alp0_minerr_cpar4  // unsigned , default = 127  level limit(for mierr>th1) of curve to map mierr to alp0 for chroma channel,   that we can do for texture region. 0~255.
#define NR4_ALP0Y_ERR2CURV_LIMIT0                  ((0x2dad  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_snr2_alp0_minerr_ypar0  // unsigned , default = 0  threshold0 of curve to map mierr to alp0 for luma channel, this will be set value of flat region mierr that no need blur. 0~255.
//Bit 23:16        reg_nr4_snr2_alp0_minerr_ypar1  // unsigned , default = 25  threshold1 of curve to map mierr to alp0 for luma channel,this will be set value of texture region mierr that can not blur.
//Bit 15: 8        reg_nr4_snr2_alp0_minerr_ypar5  // unsigned , default = 40  rate0 (for mierr<th0) of curve to map mierr to alp0 for luma channel. the larger of the value, the deep of the slope. 0~255.
//Bit  7: 0        reg_nr4_snr2_alp0_minerr_ypar6  // unsigned , default = 40  rate1 (for mierr>th1) of curve to map mierr to alp0 for luma channel. the larger of the value, the deep of the slope. 0~255.
#define NR4_ALP0Y_ERR2CURV_LIMIT1                  ((0x2dae  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:16        reg_nr4_snr2_alp0_minerr_ypar2  // unsigned , default = 127  level limit(for mierr<th0) of curve to map mierr to alp0 for luma channel,  set to alp0 that we can do for flat region. 0~255.
//Bit 15: 8        reg_nr4_snr2_alp0_minerr_ypar3  // unsigned , default = 0  level limit(for th0<mierr<th1) of curve to map mierr to alp0 for luma channel, alp0 that we can do for misc region. 0~255.
//Bit  7: 0        reg_nr4_snr2_alp0_minerr_ypar4  // unsigned , default = 127  level limit(for mierr>th1) of curve to map mierr to alp0 for luma channel, alp0 that we can do for texture region. 0~255.
#define NR4_SNR_ALPA1_RATE_AND_OFST                ((0x2daf  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:18        reg_nr4_snr2_alp1_ycore_rate      // unsigned , default = 0    normalized 64 as "1"
//Bit 17:12        reg_nr4_snr2_alp1_ccore_rate      // unsigned , default = 0    normalized 64 as "1"
//Bit 11: 6        reg_nr4_snr2_alp1_ycore_ofst      // signed , default = 3    normalized 64 as "1"
//Bit  5: 0        reg_nr4_snr2_alp1_ccore_ofst      // signed , default = 3    normalized 64 as "1"
#define NR4_SNR_ALPHA1_MAX_MIN                     ((0x2db0  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:18        reg_nr4_snr2_alp1_ymin            // unsigned , default = 0    normalized to 64 as '1'
//Bit 17:12        reg_nr4_snr2_alp1_ymax            // unsigned , default = 63   normalized to 64 as '1'
//Bit 11: 6        reg_nr4_snr2_alp1_cmin            // unsigned , default = 0    normalized to 64 as '1'
//Bit  5: 0        reg_nr4_snr2_alp1_cmax            // unsigned , default = 63   normalized to 64 as '1'
#define NR4_ALP1C_ERR2CURV_LIMIT0                  ((0x2db1  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_snr2_alp1_minerr_cpar0  // unsigned , default = 0    annel, this will be set value of flat region mierr that no need directional NR. 0~255.
//Bit 23:16        reg_nr4_snr2_alp1_minerr_cpar1  // unsigned , default = 24   hannel,this will be set value of texture region mierr that can not do directional NR. 0~255.
//Bit 15: 8        reg_nr4_snr2_alp1_minerr_cpar5  // unsigned , default = 0    a/chroma  channel. the larger of the value, the deep of the slope.
//Bit  7: 0        reg_nr4_snr2_alp1_minerr_cpar6  // unsigned , default = 20   a/chroma  channel. the larger of the value, the deep of the slope. 0~255
#define NR4_ALP1C_ERR2CURV_LIMIT1                  ((0x2db2  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:16        reg_nr4_snr2_alp1_minerr_cpar2  // unsigned , default = 0    will be set to alp1 that we can do for flat region. 0~255.
//Bit 15: 8        reg_nr4_snr2_alp1_minerr_cpar3  // unsigned , default = 16   this will be set to alp1 that we can do for misc region. 0~255.
//Bit  7: 0        reg_nr4_snr2_alp1_minerr_cpar4  // unsigned , default = 63   will be set to alp1 that we can do for texture region. 0~255.255 before
#define NR4_ALP1Y_ERR2CURV_LIMIT0                  ((0x2db3  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_snr2_alp1_minerr_ypar0  // unsigned , default = 0    thra/chroma channel, this will be set value of flat region mierr that no need directional NR. 0~255.
//Bit 23:16        reg_nr4_snr2_alp1_minerr_ypar1  // unsigned , default = 24   thra/chroma  channel,this will be set value of texture region mierr that can not do directional NR. 0~255.
//Bit 15: 8        reg_nr4_snr2_alp1_minerr_ypar5  // unsigned , default = 0    ratlp1 for luma/chroma  channel. the larger of the value, the deep of the slope.
//Bit  7: 0        reg_nr4_snr2_alp1_minerr_ypar6  // unsigned , default = 20   ratlp1 for luma/chroma  channel. the larger of the value, the deep of the slope. 0~255
#define NR4_ALP1Y_ERR2CURV_LIMIT1                  ((0x2db4  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:16        reg_nr4_snr2_alp1_minerr_ypar2  // unsigned , default = 0    lev to alp1 for luma/chroma  channel, this will be set to alp1 that we can do for flat region. 0~255.
//Bit 15: 8        reg_nr4_snr2_alp1_minerr_ypar3  // unsigned , default = 16   levierr to alp1 for luma/chroma  channel, this will be set to alp1 that we can do for misc region. 0~255.
//Bit  7: 0        reg_nr4_snr2_alp1_minerr_ypar4  // unsigned , default = 63   lev to alp1 for luma/chroma  channel, this will be set to alp1 that we can do for texture region. 0~255.255 before
//========== nr4_snr_regs register end ==========//
//========== nr4_tnr_regs register begin ==========//
#define NR4_MTN_CTRL                               ((0x2db5  << 2) + 0xff900000)
//Bit 31: 2        reserved
//Bit  1           reg_nr4_mtn_ref_en        // unsigned , default = 1  enable motion refinement, dft = 1
//Bit  0           reg_nr4_mtn_ref_bet_sel   // unsigned , default = 0  beta selection mode for motion refinement, 0: beta1, 1: beta2, dft = 0
#define NR4_MTN_REF_PAR0                           ((0x2db6  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_mtn_ref_par0      // unsigned , default = 24  par0 for beta to gain, dft =
//Bit 23:16        reg_nr4_mtn_ref_par1      // unsigned , default = 60  par1 for beta to gain, dft =
//Bit 15: 8        reg_nr4_mtn_ref_par2      // unsigned , default = 4  par2 for beta to gain, dft =
//Bit  7: 0        reg_nr4_mtn_ref_par3      // unsigned , default = 32  par3 for beta to gain, dft =
#define NR4_MTN_REF_PAR1                           ((0x2db7  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:16        reg_nr4_mtn_ref_par4      // unsigned , default = 128  par4 for beta to gain, dft =
//Bit 15: 8        reg_nr4_mtn_ref_par5      // unsigned , default = 40  par5 for beta to gain, dft =
//Bit  7: 0        reg_nr4_mtn_ref_par6      // unsigned , default = 20  par6 for beta to gain, dft =
//========== nr4_tnr_regs register end ==========//
//========== nr4_mcnr_regs register begin ==========//
#define NR4_MCNR_LUMA_ENH_CTRL                     ((0x2db8  << 2) + 0xff900000)
//Bit 31: 4        reserved
//Bit  3           reg_nr4_luma_plus_en           // unsigned , default = 1  enable luma enhancement, dft = 1
//Bit  2           reg_nr4_luma_plus_wt_mode      // unsigned , default = 1  luma weight calc mode, 0:sqrt(1+x^2), 1: 1+abs(x), dft = 0
//Bit  1: 0        reg_nr4_luma_plus_orient_mode  // unsigned , default = 1  0: only use previous orient for pre and cur luma plus, 1: 0: only use current orient for pre and cur luma plus
#define NR4_MCNR_LUMA_STAT_LIMTX                   ((0x2db9  << 2) + 0xff900000)
//Bit 31:30        reserved
//Bit 29:16        reg_nr4_luma_plus_xst        // unsigned , default = 8    start for luma plus statistic, dft = 8
//Bit 15:14        reserved
//Bit 13: 0        reg_nr4_luma_plus_xed        // unsigned , default = 711  end for luma plus statistic, dft = HSIZE-8-1;
#define NR4_MCNR_LUMA_STAT_LIMTY                   ((0x2dba  << 2) + 0xff900000)
//Bit 31:30        reserved
//Bit 29:16        reg_nr4_luma_plus_yst          // unsigned , default = 8  start for luma plus statistic, dft = 8
//Bit 15:14        reserved
//Bit 13: 0        reg_nr4_luma_plus_yed          // unsigned , default = 231  end for luma plus statistic, dft = VSIZE-8-1
#define NR4_MCNR_LUMA_DIF_CALC                     ((0x2dbb  << 2) + 0xff900000)
//Bit 31:30        reserved
//Bit 29:24        reg_nr4_luma_plus_ugain        // unsigned , default = 8  U's gain for luma enhancement, 16 normalized as '1'
//Bit 23:22        reserved
//Bit 21:16        reg_nr4_luma_plus_vgain        // unsigned , default = 8  V's gain for luma enhancement, 16 normalized as '1'
//Bit 15: 8        reg_nr4_luma_plus_ycor_thd     // unsigned , default = 2  Y coring threshold for difference calc., dft = 0
//Bit  7: 0        reg_nr4_luma_plus_ccor_thd     // unsigned , default = 0  C coring threshold for difference calc., dft = 0
#define NR4_MCNR_LUMAPRE_CAL_PRAM                  ((0x2dbc  << 2) + 0xff900000)
//Bit 31:26        reserved
//Bit 25:24        reg_nr4_pre_u_orient           // signed , default = 0  orientation of previous U, initial to 0, and will be updated by software
//Bit 23:18        reserved
//Bit 17:16        reg_nr4_pre_v_orient           // signed , default = 0  orientation of previous V, initial to 0, and will be updated by software
//Bit 15: 8        reg_nr4_pre_u_mean             // unsigned , default = 0  mean of previous U, initial to 0, and will be updated by software
//Bit  7: 0        reg_nr4_pre_v_mean             // unsigned , default = 0  mean of previousV, initial to 0, and will be updated by software
#define NR4_MCNR_LUMACUR_CAL_PRAM                  ((0x2dbd  << 2) + 0xff900000)
//Bit 31:26        reserved
//Bit 25:24        reg_nr4_cur_u_orient           // signed , default = 0  orientation of current U, initial to 0, and will be updated by software
//Bit 23:18        reserved
//Bit 17:16        reg_nr4_cur_v_orient           // signed , default = 0  orientation of current V, initial to 0, and will be updated by software
//Bit 15: 8        reg_nr4_cur_u_mean             // unsigned , default = 0  mean of current U, initial to 0, and will be updated by software
//Bit  7: 0        reg_nr4_cur_v_mean             // unsigned , default = 0  mean of current, initial to 0, and will be updated by software
#define NR4_MCNR_MV_CTRL_REG                       ((0x2dbe  << 2) + 0xff900000)
//Bit 31:14        reserved
//Bit 13:12        reg_nr4_sad_bitw          // unsigned , default = 2  sad bit width (8 + x) before clip to u8, dft = 1
//Bit 11: 4        reg_nr4_glb_gain          // unsigned , default = 64  global gain calc. by software, 64 is normalized as '1'
//Bit  3: 0        reg_nr4_mv_err_rsft       // unsigned , default = 8  right shift for mv err calc., dft = 9
#define NR4_MCNR_MV_GAIN0                          ((0x2dbf  << 2) + 0xff900000)
//Bit 31:28        reg_nr4_lftmvx_gain       // unsigned , default = 1  left mvx gain for err calc., dft = 1
//Bit 27:24        reg_nr4_lftmvy_gain       // unsigned , default = 1  left mvy gain for err calc., dft = 1
//Bit 23:20        reg_nr4_zmvx_gain         // unsigned , default = 5  zero mvx gain for err calc., dft = 2
//Bit 19:16        reg_nr4_zmvy_gain         // unsigned , default = 5  zero mvy gain for err calc., dft = 4
//Bit 15:12        reg_nr4_lmvx0_gain        // unsigned , default = 2  line mvx0 gain for err calc., dft = 1
//Bit 11: 8        reg_nr4_lmvx1_gain        // unsigned , default = 2  line mvx1 gain for err calc., dft = 1
//Bit  7: 4        reg_nr4_lmvy0_gain        // unsigned , default = 2  line mvy0 gain for err calc., dft = 1
//Bit  3: 0        reg_nr4_lmvy1_gain        // unsigned , default = 2  line mvy1 gain for err calc., dft = 1
#define NR4_MCNR_LMV_PARM                          ((0x2dc0  << 2) + 0xff900000)
//Bit 31:28        reg_nr4_lmv_rt0		         // unsigned , default = 3  ratio of max lmv
//Bit 27:24        reg_nr4_lmv_rt1		         // unsigned , default = 3  ratio of second max lmv
//Bit 23:22        reserved
//Bit 21:16        reg_nr4_lmv_num_lmt0	     // unsigned , default = 16  lmv0 least/limit number of (total number - zero_bin)
//Bit 15:14        reserved
//Bit 13: 8        reg_nr4_lmv_num_lmt1	     // unsigned , default = 8  lmv1 least/limit number of (total number - zero_bin - max0)
//Bit  7: 2        reserved
//Bit  1: 0        reg_nr4_max_sad_rng       // unsigned , default = 1  search range of max2 sad in small region, dft = 1
#define NR4_MCNR_ALP0_REG                          ((0x2dc1  << 2) + 0xff900000)
//Bit 31:26        reserved
//Bit 25           reg_nr4_alp0_fail_chk     // unsigned , default = 1  enable check for alp0 fail status
//Bit 24           reg_nr4_bet0_coef_ref_en  // unsigned , default = 1  bet1 refinement by coef_blt
//Bit 23:16        reg_nr4_alp0_posad_gain   // unsigned , default = 255  the sad (norm) gain for pixel pointed by MV;
//Bit 15:10        reserved
//Bit  9: 8        reg_nr4_alp0_norm_mode    // unsigned , default = 0  alp0 select sad norm mode, 0: disable, 1: enable dc norm, 2: enable ac norm, 3: enable both (dc/ac) norm, dft = 3
//Bit  7: 6        reserved
//Bit  5: 0        reg_nr4_alp0_norm_gain    // unsigned , default = 16  alp0 gain for sad norm, '32' as '1', dft = 1
#define NR4_MCNR_ALP1_AND_BET0_REG                 ((0x2dc2  << 2) + 0xff900000)
//Bit 31:26        reserved
//Bit 25:24        reg_nr4_alp1_norm_mode    // unsigned , default = 3  alp1 select sad norm mode, 0: disable, 1: enable dc norm, 2: enable ac norm, 3: enable both (dc/ac) norm, dft = 3
//Bit 23:22        reserved
//Bit 21:16        reg_nr4_alp1_norm_gain    // unsigned , default = 3  alp1 gain for sad norm, '32' as '1', dft = 1
//Bit 15:10        reserved
//Bit  9: 8        reg_nr4_bet0_norm_mode    // unsigned , default = 3  bet0 select sad norm mode, 0: disable, 1: enable dc norm, 2: enable ac norm, 3: enable both (dc/ac) norm, dft = 3
//Bit  7: 6        reserved
//Bit  5: 0        reg_nr4_bet0_norm_gain    // unsigned , default = 8  bet0 gain for sad norm, '32' as '1', dft = 1
#define NR4_MCNR_BET1_AND_BET2_REG                 ((0x2dc3  << 2) + 0xff900000)
//Bit 31:26        reserved
//Bit 25:24        reg_nr4_bet1_norm_mode    // unsigned , default = 3  bet1 select sad norm mode, 0: disable, 1: enable dc norm, 2: enable ac norm, 3: enable both (dc/ac) norm, dft = 3
//Bit 23:22        reserved
//Bit 21:16        reg_nr4_bet1_norm_gain    // unsigned , default = 8  bet1 gain for sad norm, '32' as '1', dft = 1
//Bit 15:10        reserved
//Bit  9: 8        reg_nr4_bet2_norm_mode    // unsigned , default = 0  bet2 select sad norm mode, 0: disable, 1: enable dc norm, 2: enable ac norm, 3: enable both (dc/ac) norm, dft = 3
//Bit  7: 6        reserved
//Bit  5: 0        reg_nr4_bet2_norm_gain    // unsigned , default = 16  bet2 gain for sad norm, '32' as '1', dft = 1
#define NR4_MCNR_AC_DC_CRTL                        ((0x2dc4  << 2) + 0xff900000)
//Bit 31:16        reserved
//Bit 15:12        reserved
//Bit 11           reg_nr4_dc_mode           // unsigned , default = 1  mode for dc selection,0: Y_lpf, 1: Y_lpf + (U_Lpf+V_lpf)/2,
//Bit 10           reg_nr4_ac_mode           // unsigned , default = 1  mode for ac selection, 0: Y_abs_dif, 1: Y_abs_dif + (U_abs_dif + V_abs_dif)/2
//Bit  9           reg_nr4_dc_sel            // unsigned , default = 0  selection mode for dc value, 0: 3x5, 1: 5x5, dft = 1
//Bit  8           reg_nr4_ac_sel            // unsigned , default = 0  selection mode for ac value, 0: 3x5, 1: 5x5, dft = 1
//Bit  7            reserved
//Bit  6: 4        reg_nr4_dc_shft           // unsigned , default = 2  right shift for dc value, dft = 2
//Bit  3            reserved
//Bit  2: 0        reg_nr4_ac_shft           // unsigned , default = 0  right shift for ac value, dft = 2
#define NR4_MCNR_CM_CTRL0                          ((0x2dc5  << 2) + 0xff900000)
//Bit 31:29        reserved
//Bit 28           reg_nr4_cm_skin_prc_bet0      // unsigned , default = 0  enable skin tone processing for mcnr bet0 calc., dft = 1
//Bit 27:26        reg_nr4_cm_chrm_sel           // unsigned , default = 1  chrome selection for color match, 0: 1x1, 1: 3X3LPF, 2: 3x5LPF, 3: 5x5LPF for 5lines, 3x5LPF for 3lines, dft = 3
//Bit 25:24        reg_nr4_cm_luma_sel           // unsigned , default = 1  luma selection for color match, 0: 1x1, 1: 3X3LPF, 2: 3x5LPF, 3: 5x5LPF for 5lines, 3x5LPF for 3lines, dft = 3
//Bit 23:21        reg_nr4_cm_skin_rshft_bet0    // unsigned , default = 3  right shift for bet0's skin color gains, dft = 3
//Bit 20           reg_nr4_cm_var_sel            // unsigned , default = 1  variation selection for color match, 0: 3x5, 1: 5x5 for 5lines, 3x5 for 3lines, dft = 1
//Bit 19           reg_nr4_cm_green_prc_bet0     // unsigned , default = 1  enable green processing for mcnr bet0 calc., dft = 1
//Bit 18:16        reg_nr4_cm_green_rshft_bet0   // unsigned , default = 4  right shift for bet0's green color gains, dft = 4
//Bit 15:14        reg_nr4_preflt_mod            // unsigned , default = 2  pre filter mode in mcnr, 0: mv pointed pixel, 1: bilater filter
//Bit 13:12        reg_nr4_alp1_mode             // unsigned , default = 1  mode for alpha1's sad selection, 0: max sad, 1: three min sads, 2: min sad, 3: co sad
//Bit 11:10        reserved
//Bit  9: 8        reg_nr4_bet0_mode             // unsigned , default = 0  mode for bet0's sad selection, 0: max sad, 1: three min sads, 2: min sad, 3: co sad, else: (co sad) - (min sad)
//Bit  7: 6        reserved
//Bit  5: 4        reg_nr4_bet1_mode             // unsigned , default = 2  mode for bet1's sad selection, 0: max sad, 1: three min sads, 2: min sad, 3: co sad, else: (co sad) - (min sad)
//Bit  3: 2        reserved
//Bit  1: 0        reg_nr4_bet2_mode             // unsigned , default = 1  mode for bet2's sad selection, 0: max sad, 1: three min sads, 2: min sad, 3: co sad, else: (co sad) - (min sad)
#define NR4_MCNR_CM_PRAM                           ((0x2dc6  << 2) + 0xff900000)
//Bit 31:30        reserved
//Bit 29           reg_nr4_cm_blue_prc_alp0      // unsigned , default = 1  enable blue processing for mcnr alpha0 calc., dft = 1
//Bit 28           reg_nr4_cm_blue_prc_alp1      // unsigned , default = 1  enable blue processing for mcnr alpha1 calc., dft = 1
//Bit 27           reg_nr4_cm_skin_prc_alp0      // unsigned , default = 1  enable skin tone processing for mcnr alpha0 calc., dft = 1
//Bit 26           reg_nr4_cm_green_prc_alp0     // unsigned , default = 1  enable green processing for mcnr alpha0 clac., dft = 1
//Bit 25           reg_nr4_cm_skin_prc_alp1      // unsigned , default = 1  enable skin tone processing for mcnr alpha0 calc., dft = 1
//Bit 24           reg_nr4_cm_green_prc_alp1     // unsigned , default = 1  enable green processing for mcnr alpha1 clac., dft = 1
//Bit 23:20        reg_nr4_cm_blue_hue_st        // unsigned , default = 13  hue start of blue, dft =
//Bit 19:16        reg_nr4_cm_blue_hue_ed        // unsigned , default = 15  hue end  of blue, dft =
//Bit 15:12        reg_nr4_cm_green_hue_st       // unsigned , default = 7  hue start of green, dft =
//Bit 11: 8        reg_nr4_cm_green_hue_ed       // unsigned , default = 10  hue end  of green, dft =
//Bit  7: 4        reg_nr4_cm_skin_hue_st        // unsigned , default = 5  hue start of skin, dft =
//Bit  3: 0        reg_nr4_cm_skin_hue_ed        // unsigned , default = 6  hue end  of skin, dft =
#define NR4_MCNR_CM_RSHFT_ALP0                     ((0x2dc7  << 2) + 0xff900000)
//Bit 31:28        reserved
//Bit 27:25        reg_nr4_cm_blue_rshft_bet0    // unsigned , default = 5  right shift for bet0's blue color gains, dft = 5
//Bit 24           reg_nr4_cm_blue_prc_bet0      // unsigned , default = 1  enable blue processing for mcnr bet0 calc., dft = 1
//Bit 23            reserved
//Bit 22:20        reg_nr4_cm_blue_rshft_alp0    // unsigned , default = 5  right shift for alpha0/1's blue color gains, dft = 5
//Bit 19            reserved
//Bit 18:16        reg_nr4_cm_blue_rshft_alp1    // unsigned , default = 5  right shift for alpha0/1's blue color gains, dft = 5
//Bit 15            reserved
//Bit 14:12        reg_nr4_cm_green_rshft_alp0   // unsigned , default = 4  right shift for alpha0/1's green color gains, dft = 4
//Bit 11            reserved
//Bit 10: 8        reg_nr4_cm_green_rshft_alp1   // unsigned , default = 4  right shift for alpha0/1's green color gains, dft = 4
//Bit  7            reserved
//Bit  6: 4        reg_nr4_cm_skin_rshft_alp0    // unsigned , default = 3  right shift for alpha0/1's skin color gains, dft = 3
//Bit  3            reserved
//Bit  2: 0        reg_nr4_cm_skin_rshft_alp1    // unsigned , default = 3  right shift for alpha0/1's skin color gains, dft = 3
#define NR4_MCNR_BLUE_CENT                         ((0x2dc8  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:16        reg_nr4_cm_blue_centx         // unsigned , default = 157  x coordinate of center of blue, dft =
//Bit 15: 8        reserved
//Bit  7: 0        reg_nr4_cm_blue_centy         // unsigned , default = 110  y coordinate of center of blue, dft =
#define NR4_MCNR_BLUE_GAIN_PAR0                    ((0x2dc9  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_cm_blue_gain_par0   // unsigned , default = 32  par0 for blue gain, dft =
//Bit 23:16        reg_nr4_cm_blue_gain_par1   // unsigned , default = 255  par1 for blue gain, dft =
//Bit 15: 8        reg_nr4_cm_blue_gain_par2   // unsigned , default = 4  par2 for blue gain, dft =
//Bit  7: 0        reg_nr4_cm_blue_gain_par3   // unsigned , default = 32  par3 for blue gain, dft =
#define NR4_MCNR_BLUE_GAIN_PAR1                    ((0x2dca  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:16        reg_nr4_cm_blue_gain_par4   // unsigned , default = 32  par4 for blue gain, dft =
//Bit 15: 8        reg_nr4_cm_blue_gain_par5   // unsigned , default = 32  par5 for blue gain, dft =
//Bit  7: 0        reg_nr4_cm_blue_gain_par6   // unsigned , default = 0  par6 for blue gain, dft =
#define NR4_MCNR_CM_BLUE_CLIP0                     ((0x2dcb  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:16        reg_nr4_cm_blue_luma_min      // unsigned , default = 40  luma min for blue color matching, dft =
//Bit 15: 8        reserved
//Bit  7: 0        reg_nr4_cm_blue_luma_max      // unsigned , default = 180  luma max for blue color matching, dft =
#define NR4_MCNR_CM_BLUE_CLIP1                     ((0x2dcc  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_cm_blue_sat_min       // unsigned , default = 5  saturation min for blue color matching, dft =
//Bit 23:16        reg_nr4_cm_blue_sat_max       // unsigned , default = 255  saturation max for blue color matching, dft =
//Bit 15: 8        reg_nr4_cm_blue_var_min       // unsigned , default = 0  variation min for blue color matching, dft =
//Bit  7: 0        reg_nr4_cm_blue_var_max       // unsigned , default = 12  variation max for blue color matching, dft =
#define NR4_MCNR_GREEN_CENT                        ((0x2dcd  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:16        reg_nr4_cm_green_centx         // unsigned , default = 114  x coordinate of center of green, dft =
//Bit 15: 8        reserved
//Bit  7: 0        reg_nr4_cm_green_centy         // unsigned , default = 126  y coordinate of center of green, dft =
#define NR4_MCNR_GREEN_GAIN_PAR0                   ((0x2dce  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_cm_green_gain_par0   // unsigned , default = 16  par0 for green gain, dft =
//Bit 23:16        reg_nr4_cm_green_gain_par1   // unsigned , default = 255  par1 for green gain, dft =
//Bit 15: 8        reg_nr4_cm_green_gain_par2   // unsigned , default = 255  par2 for green gain, dft =
//Bit  7: 0        reg_nr4_cm_green_gain_par3   // unsigned , default = 16  par3 for green gain, dft =
#define NR4_MCNR_GREEN_GAIN_PAR1                   ((0x2dcf  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:16        reg_nr4_cm_green_gain_par4   // unsigned , default = 16  par4 for green gain, dft =
//Bit 15: 8        reg_nr4_cm_green_gain_par5   // unsigned , default = 128  par5 for green gain, dft =
//Bit  7: 0        reg_nr4_cm_green_gain_par6   // unsigned , default = 0  par6 for green gain, dft =
#define NR4_MCNR_GREEN_CLIP0                       ((0x2dd0  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:16        reg_nr4_cm_green_luma_min      // unsigned , default = 40  luma min for green color matching, dft =
//Bit 15: 8        reserved
//Bit  7: 0        reg_nr4_cm_green_luma_max      // unsigned , default = 160  luma max for green color matching, dft =
#define NR4_MCNR_GREEN_CLIP2                       ((0x2dd1  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_cm_green_sat_min       // unsigned , default = 4  saturation min for green color matching, dft =
//Bit 23:16        reg_nr4_cm_green_sat_max       // unsigned , default = 255  saturation max for green color matching, dft =
//Bit 15: 8        reg_nr4_cm_green_var_min       // unsigned , default = 0  variation min for green color matching, dft =
//Bit  7: 0        reg_nr4_cm_green_var_max       // unsigned , default = 12  variation max for green color matching, dft =
#define NR4_MCNR_SKIN_CENT                         ((0x2dd2  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:16        reg_nr4_cm_skin_centx         // unsigned , default = 112  x coordinate of center of skin tone, dft =
//Bit 15: 8        reserved
//Bit  7: 0        reg_nr4_cm_skin_centy         // unsigned , default = 149  y coordinate of center of skin tone, dft =
#define NR4_MCNR_SKIN_GAIN_PAR0                    ((0x2dd3  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_cm_skin_gain_par0   // unsigned , default = 20  par0 for skin gain, dft =
//Bit 23:16        reg_nr4_cm_skin_gain_par1   // unsigned , default = 255  par1 for skin gain, dft =
//Bit 15: 8        reg_nr4_cm_skin_gain_par2   // unsigned , default = 255  par2 for skin gain, dft =
//Bit  7: 0        reg_nr4_cm_skin_gain_par3   // unsigned , default = 8  par3 for skin gain, dft =
#define NR4_MCNR_SKIN_GAIN_PAR1                    ((0x2dd4  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:16        reg_nr4_cm_skin_gain_par4   // unsigned , default = 8  par4 for skin gain, dft =
//Bit 15: 8        reg_nr4_cm_skin_gain_par5   // unsigned , default = 128  par5 for skin gain, dft =
//Bit  7: 0        reg_nr4_cm_skin_gain_par6   // unsigned , default = 0  par6 for skin gain, dft =
#define NR4_MCNR_SKIN_CLIP0                        ((0x2dd5  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:16        reg_nr4_cm_skin_luma_min      // unsigned , default = 40  luma min for skin color matching, dft =
//Bit 15: 8        reserved
//Bit  7: 0        reg_nr4_cm_skin_luma_max      // unsigned , default = 180  luma max for skin color matching, dft =
#define NR4_MCNR_SKIN_CLIP1                        ((0x2dd6  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_cm_skin_sat_min       // unsigned , default = 5  saturation min for skin color matching, dft =
//Bit 23:16        reg_nr4_cm_skin_sat_max       // unsigned , default = 255  saturation max for skin color matching, dft =
//Bit 15: 8        reg_nr4_cm_skin_var_min       // unsigned , default = 0  variation min for skin color matching, dft =
//Bit  7: 0        reg_nr4_cm_skin_var_max       // unsigned , default = 12  variation max for skin color matching, dft =
#define NR4_MCNR_ALP1_GLB_CTRL                     ((0x2dd7  << 2) + 0xff900000)
//Bit 31           reg_nr4_alp1_glb_gain_en     // unsigned , default = 0  alp1 adjust by global gain, dft = 1
//Bit 30:28        reg_nr4_alp1_glb_gain_lsft   // unsigned , default = 6  alp1 left shift before combine with global gain
//Bit 27           reg_nr4_bet0_glb_gain_en     // unsigned , default = 1  bet0 adjust by global gain, dft = 1
//Bit 26:24        reg_nr4_bet0_glb_gain_lsft   // unsigned , default = 6  bet1 left shift before combine with global gain
//Bit 23           reg_nr4_bet1_glb_gain_en     // unsigned , default = 0  bet1 adjust by global gain, dft = 0
//Bit 22:20        reg_nr4_bet1_glb_gain_lsft   // unsigned , default = 6  bet1 left shift before combine with global gain
//Bit 19           reg_nr4_bet2_glb_gain_en     // unsigned , default = 1  bet2 adjust by global gain, dft = 1
//Bit 18:16        reg_nr4_bet2_glb_gain_lsft   // unsigned , default = 6  bet2 left shift before combine with global gain
//Bit 15           reg_nr4_alp1_ac_en           // unsigned , default = 1  alp1 adjust by ac, dft = 1
//Bit 14:12        reg_nr4_alp1_ac_lsft         // unsigned , default = 5  alp1 left shift before combine with ac
//Bit 11           reg_nr4_bet0_ac_en           // unsigned , default = 0  bet0 adjust by ac, dft = 1
//Bit 10: 8        reg_nr4_bet0_ac_lsft         // unsigned , default = 5  bet0 left shift before combine with ac
//Bit  7           reg_nr4_bet1_ac_en           // unsigned , default = 0  bet1 adjust by ac, dft = 1
//Bit  6: 4        reg_nr4_bet1_ac_lsft         // unsigned , default = 5  bet1 left shift before combine with ac
//Bit  3           reg_nr4_bet2_ac_en           // unsigned , default = 0  bet2 adjust by ac, dft = 1
//Bit  2: 0        reg_nr4_bet2_ac_lsft         // unsigned , default = 5  bet2 left shift before combine with ac
#define NR4_MCNR_DC2NORM_LUT0                      ((0x2dd8  << 2) + 0xff900000)
//Bit 31:29        reserved
//Bit 28:24        reg_nr4_dc2norm_lut0         // unsigned , default = 16  normal 0~16, dc to norm for alpha adjust, dft =
//Bit 23:21        reserved
//Bit 20:16        reg_nr4_dc2norm_lut1         // unsigned , default = 16  normal 0~16, dc to norm for alpha adjust, dft =
//Bit 15:13        reserved
//Bit 12: 8        reg_nr4_dc2norm_lut2         // unsigned , default = 16  normal 0~16, dc to norm for alpha adjust, dft =
//Bit  7: 5        reserved
//Bit  4: 0        reg_nr4_dc2norm_lut3         // unsigned , default = 16  normal 0~16, dc to norm for alpha adjust, dft =
#define NR4_MCNR_DC2NORM_LUT1                      ((0x2dd9  << 2) + 0xff900000)
//Bit 31:29        reserved
//Bit 28:24        reg_nr4_dc2norm_lut4         // unsigned , default = 16  normal 0~16, dc to norm for alpha adjust, dft =
//Bit 23:21        reserved
//Bit 20:16        reg_nr4_dc2norm_lut5         // unsigned , default = 16  normal 0~16, dc to norm for alpha adjust, dft =
//Bit 15:13        reserved
//Bit 12: 8        reg_nr4_dc2norm_lut6         // unsigned , default = 16  normal 0~16, dc to norm for alpha adjust, dft =
//Bit  7: 5        reserved
//Bit  4: 0        reg_nr4_dc2norm_lut7         // unsigned , default = 12  normal 0~16, dc to norm for alpha adjust, dft =
#define NR4_MCNR_DC2NORM_LUT2                      ((0x2dda  << 2) + 0xff900000)
//Bit 31: 5        reserved
//Bit  4: 0        reg_nr4_dc2norm_lut8        // unsigned , default = 8   normal 0~16, dc to norm for alpha adjust, dft =
#define NR4_MCNR_AC2NORM_LUT0                      ((0x2ddb  << 2) + 0xff900000)
//Bit 31:29        reserved
//Bit 28:24        reg_nr4_ac2norm_lut0         // unsigned , default = 2  normal 0~16, ac to norm for alpha adjust, dft =
//Bit 23:21        reserved
//Bit 20:16        reg_nr4_ac2norm_lut1         // unsigned , default = 16  normal 0~16, ac to norm for alpha adjust, dft =
//Bit 15:13        reserved
//Bit 12: 8        reg_nr4_ac2norm_lut2         // unsigned , default = 16  normal 0~16, ac to norm for alpha adjust, dft =
//Bit  7: 5        reserved
//Bit  4: 0        reg_nr4_ac2norm_lut3         // unsigned , default = 12  normal 0~16, ac to norm for alpha adjust, dft =
#define NR4_MCNR_AC2NORM_LUT1                      ((0x2ddc  << 2) + 0xff900000)
//Bit 31:29        reserved
//Bit 28:24        reg_nr4_ac2norm_lut4         // unsigned , default = 4  normal 0~16, ac to norm for alpha adjust, dft =
//Bit 23:21        reserved
//Bit 20:16        reg_nr4_ac2norm_lut5         // unsigned , default = 2  normal 0~16, ac to norm for alpha adjust, dft =
//Bit 15:13        reserved
//Bit 12: 8        reg_nr4_ac2norm_lut6         // unsigned , default = 1  normal 0~16, ac to norm for alpha adjust, dft =
//Bit  7: 5        reserved
//Bit  4: 0        reg_nr4_ac2norm_lut7         // unsigned , default = 1  normal 0~16, ac to norm for alpha adjust, dft =
#define NR4_MCNR_AC2NORM_LUT2                      ((0x2ddd  << 2) + 0xff900000)
//Bit 31: 5        reserved
//Bit  4: 0        reg_nr4_ac2norm_lut8         // unsigned , default = 1  normal 0~16, ac to norm for alpha adjust, dft =
#define NR4_MCNR_SAD2ALP0_LUT0                     ((0x2dde  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_sad2alp0_lut0        // unsigned , default = 255  sad to alpha0 for temporal pixel value, dft = 255
//Bit 23:16        reg_nr4_sad2alp0_lut1        // unsigned , default = 252  sad to alpha0 for temporal pixel value, dft = 252
//Bit 15: 8        reg_nr4_sad2alp0_lut2        // unsigned , default = 249  sad to alpha0 for temporal pixel value, dft = 249
//Bit  7: 0        reg_nr4_sad2alp0_lut3        // unsigned , default = 235  sad to alpha0 for temporal pixel value, dft = 70
#define NR4_MCNR_SAD2ALP0_LUT1                     ((0x2ddf  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_sad2alp0_lut4        // unsigned , default = 185  sad to alpha0 for temporal pixel value, dft = 12
//Bit 23:16        reg_nr4_sad2alp0_lut5        // unsigned , default = 70  sad to alpha0 for temporal pixel value, dft = 1
//Bit 15: 8        reg_nr4_sad2alp0_lut6        // unsigned , default = 14  sad to alpha0 for temporal pixel value, dft = 0
//Bit  7: 0        reg_nr4_sad2alp0_lut7        // unsigned , default = 1  sad to alpha0 for temporal pixel value, dft = 0
#define NR4_MCNR_SAD2ALP0_LUT2                     ((0x2de0  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_sad2alp0_lut8        // unsigned , default = 0  sad to alpha0 for temporal pixel value, dft = 0
//Bit 23:16        reg_nr4_sad2alp0_lut9        // unsigned , default = 0  sad to alpha0 for temporal pixel value, dft = 0
//Bit 15: 8        reg_nr4_sad2alp0_lut10       // unsigned , default = 0  sad to alpha0 for temporal pixel value, dft = 0
//Bit  7: 0        reg_nr4_sad2alp0_lut11       // unsigned , default = 0  sad to alpha0 for temporal pixel value, dft = 0
#define NR4_MCNR_SAD2ALP0_LUT3                     ((0x2de1  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_sad2alp0_lut12       // unsigned , default = 0  sad to alpha0 for temporal pixel value, dft = 0
//Bit 23:16        reg_nr4_sad2alp0_lut13       // unsigned , default = 0  sad to alpha0 for temporal pixel value, dft = 0
//Bit 15: 8        reg_nr4_sad2alp0_lut14       // unsigned , default = 0  sad to alpha0 for temporal pixel value, dft = 0
//Bit  7: 0        reg_nr4_sad2alp0_lut15       // unsigned , default = 0  sad to alpha0 for temporal pixel value, dft = 0
#define NR4_MCNR_SAD2ALP1_LUT0                     ((0x2de2  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_sad2alp1_lut0        // unsigned , default = 192  sad to alpha1 for temporal blending, dft = 128
//Bit 23:16        reg_nr4_sad2alp1_lut1        // unsigned , default = 160  sad to alpha1 for temporal blending, dft = 128
//Bit 15: 8        reg_nr4_sad2alp1_lut2        // unsigned , default = 128  sad to alpha1 for temporal blending, dft = 128
//Bit  7: 0        reg_nr4_sad2alp1_lut3        // unsigned , default = 96  sad to alpha1 for temporal blending, dft = 64
#define NR4_MCNR_SAD2ALP1_LUT1                     ((0x2de3  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_sad2alp1_lut4        // unsigned , default = 64  sad to alpha1 for temporal blending, dft = 64
//Bit 23:16        reg_nr4_sad2alp1_lut5        // unsigned , default = 32  sad to alpha1 for temporal blending, dft = 128
//Bit 15: 8        reg_nr4_sad2alp1_lut6        // unsigned , default = 16  sad to alpha1 for temporal blending, dft = 255
//Bit  7: 0        reg_nr4_sad2alp1_lut7        // unsigned , default = 8  sad to alpha1 for temporal blending, dft = 255
#define NR4_MCNR_SAD2ALP1_LUT2                     ((0x2de4  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_sad2alp1_lut8        // unsigned , default = 4  sad to alpha1 for temporal blending, dft = 255
//Bit 23:16        reg_nr4_sad2alp1_lut9        // unsigned , default = 0  sad to alpha1 for temporal blending, dft = 255
//Bit 15: 8        reg_nr4_sad2alp1_lut10       // unsigned , default = 16  sad to alpha1 for temporal blending, dft = 255
//Bit  7: 0        reg_nr4_sad2alp1_lut11       // unsigned , default = 64  sad to alpha1 for temporal blending, dft = 255
#define NR4_MCNR_SAD2ALP1_LUT3                     ((0x2de5  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_sad2alp1_lut12       // unsigned , default = 96  sad to alpha1 for temporal blending, dft = 255
//Bit 23:16        reg_nr4_sad2alp1_lut13       // unsigned , default = 224  sad to alpha1 for temporal blending, dft = 255
//Bit 15: 8        reg_nr4_sad2alp1_lut14       // unsigned , default = 255  sad to alpha1 for temporal blending, dft = 255
//Bit  7: 0        reg_nr4_sad2alp1_lut15       // unsigned , default = 255  sad to alpha1 for temporal blending, dft = 255
#define NR4_MCNR_SAD2BET0_LUT0                     ((0x2de6  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_sad2bet0_lut0        // unsigned , default = 0  sad to beta0 for tnr and mcnr blending, dft = 0
//Bit 23:16        reg_nr4_sad2bet0_lut1        // unsigned , default = 2  sad to beta0 for tnr and mcnr blending, dft = 2
//Bit 15: 8        reg_nr4_sad2bet0_lut2        // unsigned , default = 4  sad to beta0 for tnr and mcnr blending, dft = 4
//Bit  7: 0        reg_nr4_sad2bet0_lut3        // unsigned , default = 8  sad to beta0 for tnr and mcnr blending, dft = 8
#define NR4_MCNR_SAD2BET0_LUT1                     ((0x2de7  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_sad2bet0_lut4        // unsigned , default = 16  sad to beta0 for tnr and mcnr blending, dft = 16
//Bit 23:16        reg_nr4_sad2bet0_lut5        // unsigned , default = 32  sad to beta0 for tnr and mcnr blending, dft = 32
//Bit 15: 8        reg_nr4_sad2bet0_lut6        // unsigned , default = 48  sad to beta0 for tnr and mcnr blending, dft = 48
//Bit  7: 0        reg_nr4_sad2bet0_lut7        // unsigned , default = 64  sad to beta0 for tnr and mcnr blending, dft = 64
#define NR4_MCNR_SAD2BET0_LUT2                     ((0x2de8  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_sad2bet0_lut8        // unsigned , default = 80  sad to beta0 for tnr and mcnr blending, dft = 80
//Bit 23:16        reg_nr4_sad2bet0_lut9        // unsigned , default = 96  sad to beta0 for tnr and mcnr blending, dft = 96
//Bit 15: 8        reg_nr4_sad2bet0_lut10       // unsigned , default = 112  sad to beta0 for tnr and mcnr blending, dft = 112
//Bit  7: 0        reg_nr4_sad2bet0_lut11       // unsigned , default = 128  sad to beta0 for tnr and mcnr blending, dft = 128
#define NR4_MCNR_SAD2BET0_LUT3                     ((0x2de9  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_sad2bet0_lut12       // unsigned , default = 196  sad to beta0 for tnr and mcnr blending, dft = 160
//Bit 23:16        reg_nr4_sad2bet0_lut13       // unsigned , default = 224  sad to beta0 for tnr and mcnr blending, dft = 192
//Bit 15: 8        reg_nr4_sad2bet0_lut14       // unsigned , default = 255  sad to beta0 for tnr and mcnr blending, dft = 224
//Bit  7: 0        reg_nr4_sad2bet0_lut15       // unsigned , default = 255  sad to beta0 for tnr and mcnr blending, dft = 255
#define NR4_MCNR_SAD2BET1_LUT0                     ((0x2dea  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_sad2bet1_lut0        // unsigned , default = 0  sad to beta1 for deghost blending, dft = 0
//Bit 23:16        reg_nr4_sad2bet1_lut1        // unsigned , default = 2  sad to beta1 for deghost blending, dft = 2
//Bit 15: 8        reg_nr4_sad2bet1_lut2        // unsigned , default = 4  sad to beta1 for deghost blending, dft = 4
//Bit  7: 0        reg_nr4_sad2bet1_lut3        // unsigned , default = 8  sad to beta1 for deghost blending, dft = 8
#define NR4_MCNR_SAD2BET1_LUT1                     ((0x2deb  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_sad2bet1_lut4        // unsigned , default = 16  sad to beta1 for deghost blending, dft = 16
//Bit 23:16        reg_nr4_sad2bet1_lut5        // unsigned , default = 32  sad to beta1 for deghost blending, dft = 32
//Bit 15: 8        reg_nr4_sad2bet1_lut6        // unsigned , default = 48  sad to beta1 for deghost blending, dft = 48
//Bit  7: 0        reg_nr4_sad2bet1_lut7        // unsigned , default = 64  sad to beta1 for deghost blending, dft = 64
#define NR4_MCNR_SAD2BET1_LUT2                     ((0x2dec  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_sad2bet1_lut8        // unsigned , default = 80  sad to beta1 for deghost blending, dft = 80
//Bit 23:16        reg_nr4_sad2bet1_lut9        // unsigned , default = 96  sad to beta1 for deghost blending, dft = 96
//Bit 15: 8        reg_nr4_sad2bet1_lut10       // unsigned , default = 112  sad to beta1 for deghost blending, dft = 112
//Bit  7: 0        reg_nr4_sad2bet1_lut11       // unsigned , default = 128  sad to beta1 for deghost blending, dft = 128
#define NR4_MCNR_SAD2BET1_LUT3                     ((0x2ded  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_sad2bet1_lut12       // unsigned , default = 160  sad to beta1 for deghost blending, dft = 160
//Bit 23:16        reg_nr4_sad2bet1_lut13       // unsigned , default = 192  sad to beta1 for deghost blending, dft = 192
//Bit 15: 8        reg_nr4_sad2bet1_lut14       // unsigned , default = 224  sad to beta1 for deghost blending, dft = 224
//Bit  7: 0        reg_nr4_sad2bet1_lut15       // unsigned , default = 255  sad to beta1 for deghost blending, dft = 255
#define NR4_MCNR_SAD2BET2_LUT0                     ((0x2dee  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_sad2bet2_lut0        // unsigned , default = 0  sad to beta2 for snr and mcnr blending, dft = 0
//Bit 23:16        reg_nr4_sad2bet2_lut1        // unsigned , default = 1  sad to beta2 for snr and mcnr blending, dft = 2
//Bit 15: 8        reg_nr4_sad2bet2_lut2        // unsigned , default = 2  sad to beta2 for snr and mcnr blending, dft  = 4
//Bit  7: 0        reg_nr4_sad2bet2_lut3        // unsigned , default = 4  sad to beta2 for snr and mcnr blending, dft = 8
#define NR4_MCNR_SAD2BET2_LUT1                     ((0x2def  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_sad2bet2_lut4        // unsigned , default = 8  sad to beta2 for snr and mcnr blending, dft = 16
//Bit 23:16        reg_nr4_sad2bet2_lut5        // unsigned , default = 16  sad to beta2 for snr and mcnr blending, dft = 32
//Bit 15: 8        reg_nr4_sad2bet2_lut6        // unsigned , default = 32  sad to beta2 for snr and mcnr blending, dft = 48
//Bit  7: 0        reg_nr4_sad2bet2_lut7        // unsigned , default = 48  sad to beta2 for snr and mcnr blending, dft = 64
#define NR4_MCNR_SAD2BET2_LUT2                     ((0x2df0  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_sad2bet2_lut8        // unsigned , default = 64  sad to beta2 for snr and mcnr blending, dft = 80
//Bit 23:16        reg_nr4_sad2bet2_lut9        // unsigned , default = 80  sad to beta2 for snr and mcnr blending, dft = 96
//Bit 15: 8        reg_nr4_sad2bet2_lut10       // unsigned , default = 96  sad to beta2 for snr and mcnr blending, dft = 112
//Bit  7: 0        reg_nr4_sad2bet2_lut11       // unsigned , default = 112  sad to beta2 for snr and mcnr blending, dft = 128
#define NR4_MCNR_SAD2BET2_LUT3                     ((0x2df1  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_sad2bet2_lut12       // unsigned , default = 128  sad to beta2 for snr and mcnr blending, dft = 160
//Bit 23:16        reg_nr4_sad2bet2_lut13       // unsigned , default = 160  sad to beta2 for snr and mcnr blending, dft = 192
//Bit 15: 8        reg_nr4_sad2bet2_lut14       // unsigned , default = 224  sad to beta2 for snr and mcnr blending, dft = 224
//Bit  7: 0        reg_nr4_sad2bet2_lut15       // unsigned , default = 255  sad to beta2 for snr and mcnr blending, dft = 255
#define NR4_MCNR_RO_U_SUM                          ((0x2df2  << 2) + 0xff900000)
//Bit 31: 0        ro_nr4_u_sum                // unsigned , default = 0  sum of U of current field/frame
#define NR4_MCNR_RO_V_SUM                          ((0x2df3  << 2) + 0xff900000)
//Bit 31: 0        ro_nr4_v_sum                // unsigned , default = 0  sum of V of current field/frame
#define NR4_MCNR_RO_GRDU_SUM                       ((0x2df4  << 2) + 0xff900000)
//Bit 31: 0        ro_nr4_grdu_sum             // unsigned , default = 0  sum of gradient U of current field/frame
#define NR4_MCNR_RO_GRDV_SUM                       ((0x2df5  << 2) + 0xff900000)
//Bit 31: 0        ro_nr4_grdv_sum             // unsigned , default = 0  sum of gradient V of current field/frame
#define NR4_TOP_CTRL                               ((0x2dff  << 2) + 0xff900000)
//Bit 31:20        reg_gclk_ctrl                 // unsigned , default = 0
//Bit 19           reserved
//Bit 18           reg_nr4_mcnr_en              // unsigned , default = 1  ncnr enable or bypass, dft = 1
//Bit 17           reg_nr2_en                 // unsigned , default = 1  nr2 enable, dft = 1
//Bit 16           reg_nr4_en                   // unsigned , default = 1  nr4 enable, dft = 1
//Bit 15           reg_nr2_proc_en            // unsigned , default = 1
//Bit 14           reg_det3d_en               // unsigned , default = 1
//Bit 13           di_polar_en                   // unsigned , default = 1  do does not have in C
//Bit 12           reg_cfr_enable             // unsigned , default = 0  0-disable;  1:enable
//Bit 11: 9        reg_3dnr_enable_l          // unsigned , default = 7  b0: Y b1:U b2:V
//Bit  8: 6        reg_3dnr_enable_r          // unsigned , default = 7  b0: Y b1:U b2:V
//Bit  5           reg_nr4_lnbuf_ctrl           // unsigned , default = 1  line buf ctrl for nr4: 0, 3lines, 1, 5lines, dft = 1
//Bit  4           reg_nr4_snr2_en              // unsigned , default = 0  snr2 enable, 0: use old snr, 1: use new snr2,   dft = 1
//Bit  3           reg_nr4_scene_change_en      // unsigned , default = 1  enable scene change proc. dft = 1
//Bit  2           nr2_sw_en                     // unsigned , default = 1  do does not have in C
//Bit  1            reserved
//Bit  0           reg_nr4_scene_change_flg     // unsigned , default = 0  flags for scene change, dft = 0
//========== nr4_mcnr_regs register end ==========//
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  nr4_regs.h
//
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  dnr_regs.h
//
//========================================================================
//  VI_HIST_SPL register    (16'h2e00 - 16'h2eff)
//========================================================================
//`define VI_HIST_SPL_VCBUS_BASE                   8'h2e
//
// Reading file:  vi_hist_spl_reg.h
//
// synopsys translate_off
// synopsys translate_on
// ----------------------------
// VI_HIST_SPL 0x2e
// ----------------------------
// -----------------------------------------------
// CBUS_BASE:  VI_HIST_SPL_VCBUS_BASE = 0x2e
// -----------------------------------------------
//BIT 14: 34bin only, 0&255 and other 32bins
//Bit 13:11 hist_din_sel, 00: from vdin0 dout,  1: from vdin1, 2: from nr dout, 3: di output, 4: vpp output, 5: vd1_din, 6: vd2_din, 7:osd1_dout
//Bit 10:8   hist_din_comp_mux, mux of [29:22], [19:12], [9:2] for hist detect
//Bit 7:5   hist_dnlp_low   the real pixels in each bins got by VI_DNLP_HISTXX should multiple with 2^(dnlp_low+3)
//Bit 3:2   hist_din_sel    the source used for hist statistics.  00: from matrix0 dout,  01: from vsc_dout, 10: from matrix1 dout, 11: form matrix1 din
//Bit 1     hist_win_en     1'b0: hist used for full picture; 1'b1: hist used for pixels within hist window
//Bit 0     hist_spl_en     1'b0: disable hist readback; 1'b1: enable hist readback
#define VI_HIST_CTRL                               ((0x2e00  << 2) + 0xff900000)
//Bit 28:16 hist_hstart  horizontal start value to define hist window
//Bit 12:0  hist_hend    horizontal end value to define hist window
#define VI_HIST_H_START_END                        ((0x2e01  << 2) + 0xff900000)
//Bit 28:16 hist_vstart  vertical start value to define hist window
//Bit 12:0  hist_vend    vertical end value to define hist window
#define VI_HIST_V_START_END                        ((0x2e02  << 2) + 0xff900000)
//Bit 15:8  hist_max    maximum value
//Bit 7:0   hist_min    minimum value
//read only
#define VI_HIST_MAX_MIN                            ((0x2e03  << 2) + 0xff900000)
//Bit 31:0  hist_spl_rd
//counts for the total luma value
//read only
#define VI_HIST_SPL_VAL                            ((0x2e04  << 2) + 0xff900000)
//Bit 21:0  hist_spl_pixel_count
//counts for the total calculated pixels
//read only
#define VI_HIST_SPL_PIX_CNT                        ((0x2e05  << 2) + 0xff900000)
//Bit 31:0  hist_chroma_sum
//counts for the total chroma value
//read only
#define VI_HIST_CHROMA_SUM                         ((0x2e06  << 2) + 0xff900000)
//Bit 31:16 higher hist bin
//Bit 15:0  lower hist bin
//0-255 are splited to 64 bins evenly, and VI_DNLP_HISTXX
//are the statistic number of pixels that within each bin.
//VI_DNLP_HIST00[15:0]  counts for the first  bin
//VI_DNLP_HIST00[31:16] counts for the second bin
//VI_DNLP_HIST01[15:0]  counts for the third  bin
//VI_DNLP_HIST01[31:16] counts for the fourth bin
//etc...
//read only
#define VI_DNLP_HIST00                             ((0x2e07  << 2) + 0xff900000)
#define VI_DNLP_HIST01                             ((0x2e08  << 2) + 0xff900000)
#define VI_DNLP_HIST02                             ((0x2e09  << 2) + 0xff900000)
#define VI_DNLP_HIST03                             ((0x2e0a  << 2) + 0xff900000)
#define VI_DNLP_HIST04                             ((0x2e0b  << 2) + 0xff900000)
#define VI_DNLP_HIST05                             ((0x2e0c  << 2) + 0xff900000)
#define VI_DNLP_HIST06                             ((0x2e0d  << 2) + 0xff900000)
#define VI_DNLP_HIST07                             ((0x2e0e  << 2) + 0xff900000)
#define VI_DNLP_HIST08                             ((0x2e0f  << 2) + 0xff900000)
#define VI_DNLP_HIST09                             ((0x2e10  << 2) + 0xff900000)
#define VI_DNLP_HIST10                             ((0x2e11  << 2) + 0xff900000)
#define VI_DNLP_HIST11                             ((0x2e12  << 2) + 0xff900000)
#define VI_DNLP_HIST12                             ((0x2e13  << 2) + 0xff900000)
#define VI_DNLP_HIST13                             ((0x2e14  << 2) + 0xff900000)
#define VI_DNLP_HIST14                             ((0x2e15  << 2) + 0xff900000)
#define VI_DNLP_HIST15                             ((0x2e16  << 2) + 0xff900000)
#define VI_DNLP_HIST16                             ((0x2e17  << 2) + 0xff900000)
#define VI_DNLP_HIST17                             ((0x2e18  << 2) + 0xff900000)
#define VI_DNLP_HIST18                             ((0x2e19  << 2) + 0xff900000)
#define VI_DNLP_HIST19                             ((0x2e1a  << 2) + 0xff900000)
#define VI_DNLP_HIST20                             ((0x2e1b  << 2) + 0xff900000)
#define VI_DNLP_HIST21                             ((0x2e1c  << 2) + 0xff900000)
#define VI_DNLP_HIST22                             ((0x2e1d  << 2) + 0xff900000)
#define VI_DNLP_HIST23                             ((0x2e1e  << 2) + 0xff900000)
#define VI_DNLP_HIST24                             ((0x2e1f  << 2) + 0xff900000)
#define VI_DNLP_HIST25                             ((0x2e20  << 2) + 0xff900000)
#define VI_DNLP_HIST26                             ((0x2e21  << 2) + 0xff900000)
#define VI_DNLP_HIST27                             ((0x2e22  << 2) + 0xff900000)
#define VI_DNLP_HIST28                             ((0x2e23  << 2) + 0xff900000)
#define VI_DNLP_HIST29                             ((0x2e24  << 2) + 0xff900000)
#define VI_DNLP_HIST30                             ((0x2e25  << 2) + 0xff900000)
#define VI_DNLP_HIST31                             ((0x2e26  << 2) + 0xff900000)
#define VI_DNLP_HIST32                             ((0x2e27  << 2) + 0xff900000)
//Bit 28:16 hist_pic_height  active input data window height
//Bit 12:0  hist_pic_width   active input data window width
#define VI_HIST_PIC_SIZE                           ((0x2e28  << 2) + 0xff900000)
//Bit 15:8 hist_pix_white_value: >= this value will be white pixel
//Bit 7:0 hist_pix_black_value: <= this value will be black pixel
#define VI_HIST_BLACK_WHITE_VALUE                  ((0x2e29  << 2) + 0xff900000)
#define VI_HIST_GCLK_CTRL                          ((0x2e2a  << 2) + 0xff900000)
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  vi_hist_spl_reg.h
//
//`define MCDI_VCBUS_BASE                8'h2f
//
// Reading file:  mcdi_regs.h
//
// synopsys translate_off
// synopsys translate_on
// -----------------------------------------------
// CBUS_BASE:  MCDI_VCBUS_BASE = 0x2f
// -----------------------------------------------
////=================================================================////
//// memc di core 0
////=================================================================////
#define MCDI_HV_SIZEIN                             ((0x2f00  << 2) + 0xff900000)
//Bit 31:29, reserved
//Bit 28:16, reg_mcdi_hsize               image horizontal size (number of cols)   default=1024
//Bit 15:13, reserved
//Bit 12: 0, reg_mcdi_vsize               image vertical size   (number of rows)   default=1024
#define MCDI_HV_BLKSIZEIN                          ((0x2f01  << 2) + 0xff900000)
//Bit    31, reg_mcdi_vrev					 default = 0
//Bit    30, reg_mcdi_hrev					 default = 0
//Bit 29:28, reserved
//Bit 27:16, reg_mcdi_blkhsize               image horizontal blk size (number of cols)   default=1024
//Bit 15:13, reserved
//Bit 11: 0, reg_mcdi_blkvsize               image vertical blk size   (number of rows)   default=1024
#define MCDI_BLKTOTAL                              ((0x2f02  << 2) + 0xff900000)
//Bit 31:24, reserved
//Bit 23: 0, reg_mcdi_blktotal
#define MCDI_MOTINEN                               ((0x2f03  << 2) + 0xff900000)
//Bit 31: 2, reserved
//Bit     1, reg_mcdi_motionrefen.           enable motion refinement of MA, default = 1
//Bit     0, reg_mcdi_motionparadoxen.       enable motion paradox detection, default = 1
#define MCDI_CTRL_MODE                             ((0x2f04  << 2) + 0xff900000)
//Bit 31:28, reserved
//Bit 27:26, reg_mcdi_lmvlocken	             0:disable, 1: use max Lmv, 2: use no-zero Lmv, lmv lock enable mode, default = 2
//Bit 25,    reg_mcdi_reldetrptchken
//                                           0: unable; 1: enable, enable repeat pattern check (not repeat mv detection) in rel det part, default = 1
//Bit 24,    reg_mcdi_reldetgmvpd22chken
//                                           0: unable; 1: enable, enable pull-down 22 mode check in gmv lock mode for rel det, default = 1
//Bit 23,    reg_mcdi_pd22chken
//                                           0: unable; 1: enable, enable pull-down 22 mode check (lock) function, default = 1
//Bit 22,    reg_mcdi_reldetlpfen
//                                           0: unable; 1: enable, enable det value lpf, default = 1
//Bit 21,    reg_mcdi_reldetlmvpd22chken
//                                           0: unable; 1: enable, enable pull-down 22 mode check in lmv lock mode for rel det, default = 1
//Bit 20,    reg_mcdi_reldetlmvdifchken
//                                           0: unable; 1: enable, enable lmv dif check in lmv lock mode for rel det, default = 1
//Bit 19,    reg_mcdi_reldetgmvdifchken
//                                           0: unable; 1: enable, enable lmv dif check in lmv lock mode for rel det, default = 1
//Bit 18,    reg_mcdi_reldetpd22chken
//                                           0: unable; 1: enable, enable pull-down 22 mode check for rel det refinement, default = 1
//Bit 17,    reg_mcdi_reldetfrqchken
//                                           0: unable; 1: enable, enable mv frequency check in rel det, default = 1
//Bit 16,    reg_mcdi_qmeen
//                                           0: unable; 1: enable, enable quarter motion estimation, defautl = 1
//Bit 15,    reg_mcdi_refrptmven
//                                           0: unable; 1: enable, use repeat mv in refinement, default = 1
//Bit 14,    reg_mcdi_refgmven
//                                           0: unable; 1: enable, use gmv in refinement, default = 1
//Bit 13,    reg_mcdi_reflmven
//                                           0: unable; 1: enable, use lmvs in refinement, default = 1
//Bit 12,    reg_mcdi_refnmven
//                                           0: unable; 1: enable, use neighoring mvs in refinement, default = 1
//Bit 11,    reserved
//Bit 10,    reg_mcdi_referrfrqchken
//                                           0: unable; 1: enable, enable mv frquency check while finding min err in ref, default = 1
//Bit 9,     reg_mcdi_refen
//                                           0: unable; 1: enable, enable mv refinement, default = 1
//Bit 8,     reg_mcdi_horlineen
//                                           0: unable; 1: enable,enable horizontal lines detection by sad map, default = 1
//Bit 7,     reg_mcdi_highvertfrqdeten
//                                           0: unable; 1: enable, enable high vertical frequency pattern detection, default = 1
//Bit 6,     reg_mcdi_gmvlocken
//                                           0: unable; 1: enable, enable gmv lock mode, default = 1
//Bit 5,     reg_mcdi_rptmven
//                                           0: unable; 1: enable, enable repeat pattern detection, default = 1
//Bit 4,     reg_mcdi_gmven
//                                           0: unable; 1: enable, enable global motion estimation, default = 1
//Bit 3,     reg_mcdi_lmven
//                                           0: unable; 1: enable, enable line mv estimation for hme, default = 1
//Bit 2,     reg_mcdi_chkedgeen
//                                           0: unable; 1: enable, enable check edge function, default = 1
//Bit 1,     reg_mcdi_txtdeten
//                                           0: unable; 1: enable, enable texture detection, default = 1
//Bit 0,     reg_mcdi_memcen
//                                           0: unable; 1: enable, enable of memc di, default = 1
#define MCDI_UNI_MVDST                             ((0x2f05  << 2) + 0xff900000)
//Bit 31:20, reserved
//Bit 19:17, reg_mcdi_unimvdstabsseg0                     segment0 for uni-mv abs, default = 1
//Bit 16:12, reg_mcdi_unimvdstabsseg1                     segment1 for uni-mv abs, default = 15
//Bit 11: 8, reg_mcdi_unimvdstabsdifgain0	          2/2, gain0 of uni-mv abs dif for segment0, normalized 2 to '1', default = 2
//Bit  7: 5, reg_mcdi_unimvdstabsdifgain1                 2/2, gain1 of uni-mv abs dif for segment1, normalized 2 to '1', default = 2
//Bit  4: 2, reg_mcdi_unimvdstabsdifgain2                 2/2, gain2 of uni-mv abs dif beyond segment1, normalized 2 to '1', default = 2
//Bit  1: 0, reg_mcdi_unimvdstsgnshft		          shift for neighboring distance of uni-mv, default = 0
#define MCDI_BI_MVDST                              ((0x2f06  << 2) + 0xff900000)
//Bit 31:20, reserved
//Bit 19:17, reg_mcdi_bimvdstabsseg0                      segment0 for bi-mv abs, default = 1
//Bit 16:12, reg_mcdi_bimvdstabsseg1                      segment1 for bi-mv abs, default = 9
//Bit 11: 8, reg_mcdi_bimvdstabsdifgain0	          6/2, gain0 of bi-mv abs dif for segment0, normalized 2 to '1', default = 6
//Bit  7: 5, reg_mcdi_bimvdstabsdifgain1                  3/2, gain1 of bi-mvabs dif for segment1, normalized 2 to '1', default = 3
//Bit  4: 2, reg_mcdi_bimvdstabsdifgain2                  2/2, gain2 of bi-mvabs dif beyond segment1, normalized 2 to '1', default = 2
//Bit  1: 0, reg_mcdi_bimvdstsgnshft	                  shift for neighboring distance of bi-mv, default = 0
#define MCDI_SAD_GAIN                              ((0x2f07  << 2) + 0xff900000)
//Bit 31:19, reserved
//Bit 18:17, reg_mcdi_unisadcorepxlgain                   uni-sad core pixels gain, default = 3
//Bit 16,    reg_mcdi_unisadcorepxlnormen                 enable uni-sad core pixels normalization, default = 0
//Bit 15:11, reserved
//Bit 10: 9, reg_mcdi_bisadcorepxlgain                    bi-sad core pixels gain, default = 3
//Bit  8,    reg_mcdi_bisadcorepxlnormen                  enable bi-sad core pixels normalization, default = 1
//Bit  7: 3, reserved
//Bit  2: 1, reg_mcdi_biqsadcorepxlgain                   bi-qsad core pixels gain, default = 3
//Bit  0,    reg_mcdi_biqsadcorepxlnormen                 enable bi-qsad core pixels normalization, default = 1
#define MCDI_TXT_THD                               ((0x2f08  << 2) + 0xff900000)
//Bit 31:24, reserved
//Bit 23:16, reg_mcdi_txtminmaxdifthd,                    min max dif threshold (>=) for texture detection, default = 24
//Bit 15: 8, reg_mcdi_txtmeandifthd,                      mean dif threshold (<) for texture detection, default = 9
//Bit  7: 3, reserved
//Bit  2: 0, reg_mcdi_txtdetthd,                          texture detecting threshold, 0~4, default = 2
#define MCDI_FLT_MODESEL                           ((0x2f09  << 2) + 0xff900000)
//Bit 31	 reserved
//Bit 30:28, reg_mcdi_flthorlineselmode                   mode for horizontal line detecting flat calculation, default = 1, same as below
//Bit 27	 reserved
//Bit 26:24, reg_mcdi_fltgmvselmode                       mode for gmv flat calculation, default = 4, same as below
//Bit 23,	 reserved
//Bit 22:20, reg_mcdi_fltsadselmode                       mode for sad flat calculation, default = 2, same as below
//Bit 19,	 reserved
//Bit 18:16, reg_mcdi_fltbadwselmode                      mode for badw flat calculation, default = 3, same as below
//Bit 15,	 reserved
//Bit 14:12, reg_mcdi_fltrptmvselmode                     mode for repeat mv flat calculation, default = 4, same as below
//Bit 11,	 reserved
//Bit 10: 8, reg_mcdi_fltbadrelselmode                    mode for bad rel flat calculation, default = 4, same as below
//Bit  7,	 reserved
//Bit  6: 4, reg_mcdi_fltcolcfdselmode                    mode for col cfd flat calculation, default = 2, same as below
//Bit  3,	 reserved
//Bit  2: 0, reg_mcdi_fltpd22chkselmode                   mode for pd22 check flat calculation, default = 2, # 0:cur dif h, 1: cur dif v, 2: pre dif h, 3: pre dif v, 4: cur flt, 5: pre flt, 6: cur+pre, 7: max all(cur,pre)
#define MCDI_CHK_EDGE_THD                          ((0x2f0a  << 2) + 0xff900000)
//Bit 23:28, reserved.
//Bit 27:24, reg_mcdi_chkedgedifsadthd.                   thd (<=) for sad dif check, 0~8, default = 1
//Bit 23:16, reserved.
//Bit 15:12, reg_mcdi_chkedgemaxedgethd.                  max drt of edge, default = 15
//Bit 11: 8, reg_mcdi_chkedgeminedgethd.                  min drt of edge, default = 2
//Bit     7, reserved.
//Bit  6: 0, reg_mcdi_chkedgevdifthd.                     thd for vertical dif in check edge, default = 14
#define MCDI_CHK_EDGE_GAIN_OFFST                   ((0x2f0b  << 2) + 0xff900000)
//Bit 31:24, reserved.
//Bit 23:20, reg_mcdi_chkedgedifthd1.                     thd1 for edge dif check (<=), default = 4
//Bit 19:16, reg_mcdi_chkedgedifthd0.                     thd0 for edge dif check (>=), default = 15
//Bit   :15, reserved.
//Bit 14:10, reg_mcdi_chkedgechklen.                      total check length for edge check, 1~24 (>0), default = 24
//Bit  9: 8, reg_mcdi_chkedgeedgesel.                     final edge select mode, 0: original start edge, 1: lpf start edge, 2: orignal start+end edge, 3: lpf start+end edge, default = 1
//Bit  7: 3, reg_mcdi_chkedgesaddstgain.                  distance gain for sad calc while getting edges, default = 4
//Bit     2, reg_mcdi_chkedgechkmode.                     edge used in check mode, 0: original edge, 1: lpf edge, defautl = 1
//Bit     1, reg_mcdi_chkedgestartedge.                   edge mode for start edge, 0: original edge, 1: lpf edge, defautl = 0
//Bit     0, reg_mcdi_chkedgeedgelpf.                     edge lpf mode, 0:[0,2,4,2,0], 1:[1,2,2,2,1], default = 0
#define MCDI_LMV_RT                                ((0x2f0c  << 2) + 0xff900000)
//BIt 31:15, reserved
//Bit 14:12, reg_mcdi_lmvvalidmode                        valid mode for lmv calc., 100b: use char det, 010b: use flt, 001b: use hori flg
//Bit 11:10, reg_mcdi_lmvgainmvmode                       four modes of mv selection for lmv weight calucluation, default = 1
//                                                        0: cur(x-3), lst(x-1,x,x+1); 1: cur(x-4,x-3), lst(x,x+1); 2: cur(x-5,x-4,x-3), lst(x-1,x,x+1,x+2,x+3); 3: cur(x-6,x-5,x-4,x-3), lst(x-1,x,x+1,x+2);
//Bit  9,    reg_mcdi_lmvinitmode                         initial lmvs at first row of input field, 0: intial value = 0; 1: inital = 32 (invalid), default = 0
//Bit  8,    reserved
//Bit  7: 4, reg_mcdi_lmvrt0                              ratio of max mv, default = 5
//Bit  3: 0, reg_mcdi_lmvrt1                              ratio of second max mv, default = 5
#define MCDI_LMV_GAINTHD                           ((0x2f0d  << 2) + 0xff900000)
//Bit 31:24, reg_mcdi_lmvvxmaxgain                        max gain of lmv weight, default = 96
//Bit 23,    reserved
//Bit 22:20, reg_mcdi_lmvdifthd0                          dif threshold 0 (<) for small lmv, default = 1
//Bit 19:17, reg_mcdi_lmvdifthd1                          dif threshold 1 (<) for median lmv, default = 2
//Bit 16:14, reg_mcdi_lmvdifthd2                          dif threshold 2 (<) for large lmv, default = 3
//Bit 13: 8, reg_mcdi_lmvnumlmt                           least/limit number of (total number - max0), default = 20
//Bit  7: 0, reg_mcdi_lmvfltthd                           flt cnt thd (<) for lmv, default = 9
#define MCDI_RPTMV_THD0                            ((0x2f0e  << 2) + 0xff900000)
//Bit 31:25, reg_mcdi_rptmvslpthd2			  slope thd (>=) between i and i+3/i-3 (i+4/i-4), default = 64
//Bit 24:20, reg_mcdi_rptmvslpthd1                        slope thd (>=) between i and i+2/i-2, default = 4
//Bit 19:10, reg_mcdi_rptmvampthd2                        amplitude thd (>=) between max and min, when count cycles, default = 300
//Bit  9: 0, reg_mcdi_rptmvampthd1                        amplitude thd (>=) between average of max and min, default = 400
#define MCDI_RPTMV_THD1                            ((0x2f0f  << 2) + 0xff900000)
//Bit 31:28, reserved
//Bit 27:25, reg_mcdi_rptmvcyccntthd                      thd (>=) of total cycles count, default = 2
//Bit 24:21, reg_mcdi_rptmvcycdifthd                      dif thd (<) of cycles length, default = 3
//Bit 20:18, reg_mcdi_rptmvcycvldthd                      thd (>) of valid cycles number, default = 1
//Bit 17:15, reg_mcdi_rptmvhalfcycminthd                  min length thd (>=) of half cycle, default = 2
//Bit 14:11, reg_mcdi_rptmvhalfcycdifthd                  neighboring half cycle length dif thd (<), default = 5
//Bit 10: 8, reg_mcdi_rptmvminmaxcntthd                   least number of valid max and min, default = 2
//Bit  7: 5, reg_mcdi_rptmvcycminthd                      min length thd (>=) of cycles, default = 2
//Bit  4: 0, reg_mcdi_rptmvcycmaxthd                      max length thd (<) of cycles, default = 17
#define MCDI_RPTMV_THD2                            ((0x2f10  << 2) + 0xff900000)
//Bit 31:24, reserved
//Bit 23:16, reg_mcdi_rptmvhdifthd0                       higher hdif thd (>=) (vertical edge) for rpt detection, default = 8
//Bit 15: 8, reg_mcdi_rptmvhdifthd1                       hdif thd (>=) (slope edge) for rpt detection, default = 4
//Bit  7: 0, reg_mcdi_rptmvvdifthd                        vdif thd (>=) (slope edge) for rpt detection, default = 1
#define MCDI_RPTMV_SAD                             ((0x2f11  << 2) + 0xff900000)
//Bit 31:26, reserved
//Bit 25:16, reg_mcdi_rptmvsaddifthdgain                  7x3x(16/16), gain for sad dif thd in rpt mv detection, 0~672, normalized 16 as '1', default = 336
//Bit 15:10, reserved
//Bit  9: 0, reg_mcdi_rptmvsaddifthdoffst                 offset for sad dif thd in rpt mv detection, -512~511, default = 16
#define MCDI_RPTMV_FLG                             ((0x2f12  << 2) + 0xff900000)
//Bit 31:18,  reserved
//Bit 17:16,  reg_mcdi_rptmvmode                          select mode of mvs for repeat motion estimation, 0: hmv, 1: qmv/2, 2 or 3: qmv/4, default = 2
//Bit 15: 8,  reg_mcdi_rptmvflgcntthd                     thd (>=) of min count number for rptmv of whole field, for rptmv estimation, default = 64
//Bit  7: 5,  reserved
//Bit  4: 0,  reg_mcdi_rptmvflgcntrt                      4/32, ratio for repeat mv flag count, normalized 32 as '1', set 31 to 32,
#define MCDI_RPTMV_GAIN                            ((0x2f13  << 2) + 0xff900000)
//Bit 31:24, reg_mcdi_rptmvlftgain                        up repeat mv gain for hme, default = 96
//Bit 23:16, reg_mcdi_rptmvuplftgain                      up left repeat mv gain for hme, default = 32
//Bit 15: 8, reg_mcdi_rptmvupgain                         up repeat mv gain for hme, default = 64
//Bit  7: 0, reg_mcdi_rptmvuprightgain                    up right repeat mv gain for hme, default = 32
#define MCDI_GMV_RT                                ((0x2f14  << 2) + 0xff900000)
//Bit 31,    reserved
//Bit 30:24, reg_mcdi_gmvmtnrt0                           ratio 0 for motion senario, set 127 to 128, normalized 128 as '1', default =32
//Bit 23,    reserved
//Bit 22:16, reg_mcdi_gmvmtnrt1                           ratio 1 for motion senario, set 127 to 128, normalized 128 as '1', default = 56
//Bit 15,    reserved
//Bit 14: 8, reg_mcdi_gmvstlrt0                           ratio 0 for still senario, set 127 to 128, normalized 128 as '1', default = 56
//Bit  7,    reserved
//Bit  6: 0, reg_mcdi_gmvstlrt1                           ratio 1 for still senario, set 127 to 128, normalized 128 as '1', default = 80
#define MCDI_GMV_GAIN                              ((0x2f15  << 2) + 0xff900000)
//Bit 31:25, reg_mcdi_gmvzeromvlockrt0                    ratio 0 for locking zero mv, set 127 to 128, normalized 128 as '1', default = 100
//Bit 24:18, reg_mcdi_gmvzeromvlockrt1                    ratio 1 for locking zero mv, set 127 to 128, normalized 128 as '1', default = 112
//Bit 17:16, reg_mcdi_gmvvalidmode                        valid mode for gmv calc., 10b: use flt, 01b: use hori flg, default = 3
//Bit 15: 8, reg_mcdi_gmvvxgain                           gmv's vx gain when gmv locked for hme, default = 0
//Bit  7: 0, reg_mcdi_gmvfltthd                           flat thd (<) for gmv calc. default = 3
#define MCDI_HOR_SADOFST                           ((0x2f16  << 2) + 0xff900000)
//Bit 31:25, reserved
//Bit 24:16, reg_mcdi_horsaddifthdgain                    21*1/8, gain/divisor for sad dif threshold in hor line detection, normalized 8 as '1', default = 21
//Bit 15: 8, reg_mcdi_horsaddifthdoffst                   offset for sad dif threshold in hor line detection, -128~127, default = 0
//Bit  7: 0, reg_mcdi_horvdifthd                          threshold (>=) of vertical dif of next block for horizontal line detection, default = 24
#define MCDI_REF_MV_NUM                            ((0x2f17  << 2) + 0xff900000)
//Bit 31: 2, reserved
//Bit  1: 0, reg_mcdi_refmcmode.         motion compensated mode used in refinement, 0: pre, 1: next, 2: (pre+next)/2, default = 0
#define MCDI_REF_BADW_THD_GAIN                     ((0x2f18  << 2) + 0xff900000)
//Bit 31:28, reserved
//Bit 27:24, reg_mcdi_refbadwcnt2gain.   gain for badwv count num==3, default = 6
//Bit 23:20, reg_mcdi_refbadwcnt1gain.   gain for badwv count num==2, default = 3
//Bit 19:16, reg_mcdi_refbadwcnt0gain.   gain for badwv count num==1, default = 1
//Bit 15:12, reg_mcdi_refbadwthd3.       threshold 3 for detect badweave with largest average luma, default = 4
//Bit 11: 8, reg_mcdi_refbadwthd2.       threshold 2 for detect badweave with third smallest average luma, default = 3
//Bit  7: 4, reg_mcdi_refbadwthd1.       threshold 1 for detect badweave with second smallest average luma, default = 2
//Bit  3: 0, reg_mcdi_refbadwthd0.       threshold 0 for detect badweave with smallest average luma, default = 1
#define MCDI_REF_BADW_SUM_GAIN                     ((0x2f19  << 2) + 0xff900000)
//Bit 31:13, reserved
//Bit 12: 8, reg_mcdi_refbadwsumgain0.   sum gain for r channel, 0~16, default = 8
//Bit  7: 5, reserved
//Bit     4, reg_mcdi_refbadwcalcmode.   mode for badw calculation, 0:sum, 1:max, default = 0
//Bit  3: 0, reserved
#define MCDI_REF_BS_THD_GAIN                       ((0x2f1a  << 2) + 0xff900000)
//Bit 31:28, reg_mcdi_refbsudgain1.      up & down block stregth gain1, normalized to 8 as '1', default = 2
//Bit 27:24, reg_mcdi_refbsudgain0.      up & down block stregth gain0, normalized to 8 as '1', default = 4
//Bit 23:19, reserved
//Bit 18:16, reg_mcdi_refbslftgain.      left block strength gain, default = 0
//Bit 15:13, reserved
//Bit 12: 8, reg_mcdi_refbsthd1.         threshold 1 for detect block stregth in refinment, default = 16
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_refbsthd0.         threshold 0 for detect block stregth in refinment, default = 8
#define MCDI_REF_ERR_GAIN0                         ((0x2f1b  << 2) + 0xff900000)
//Bit    31, reserved
//Bit 30:24, reg_mcdi_referrnbrdstgain.            neighoring mv distances gain for err calc. in ref, normalized to 8 as '1', default = 48
//Bit 23:20, reserved
//Bit 19:16, reg_mcdi_referrbsgain.                bs gain for err calc. in ref, normalized to 8 as '1', default = 4
//Bit    15, reserved
//Bit 14: 8, reg_mcdi_referrbadwgain.              badw gain for err calc. in ref, normalized to 8 as '1', default = 64
//Bit  7: 4, reserved
//Bit  3: 0, reg_mcdi_referrsadgain.               sad gain for err calc. in ref, normalized to 8 as '1', default = 4
#define MCDI_REF_ERR_GAIN1                         ((0x2f1c  << 2) + 0xff900000)
//Bit 31:20, reserved
//Bit 19:16, reg_mcdi_referrchkedgegain.           check edge gain for err calc. in ref, normalized to 8 as '1', default = 4
//Bit 15:12, reserved
//Bit 11: 8, reg_mcdi_referrlmvgain.               (locked) lmv gain for err calc. in ref, normalized to 8 as '1', default = 0
//Bit  7: 4, reserved
//Bit  3: 0, reg_mcdi_referrgmvgain.               (locked) gmv gain for err calc. in ref, normalized to 8 as '1', default = 0
#define MCDI_REF_ERR_FRQ_CHK                       ((0x2f1d  << 2) + 0xff900000)
//Bit 31:28, reserved
//Bit 27:24, reg_mcdi_referrfrqgain.               gain for mv frquency, normalized to 4 as '1', default = 10
//Bit 23:21, reserved
//Bit 20:16, reg_mcdi_referrfrqmax.                max gain for mv frquency check, default = 31
//Bit    15, reserved
//Bit 14:12, reg_mcdi_ref_errfrqmvdifthd2.         mv dif threshold 2 (<) for mv frquency check, default = 3
//Bit    11, reserved
//Bit 10: 8, reg_mcdi_ref_errfrqmvdifthd1.         mv dif threshold 1 (<) for mv frquency check, default = 2
//Bit     7, reserved
//Bit  6: 4, reg_mcdi_ref_errfrqmvdifthd0.         mv dif threshold 0 (<) for mv frquency check, default = 1
//Bit  3: 0, reserved
#define MCDI_QME_LPF_MSK                           ((0x2f1e  << 2) + 0xff900000)
//Bit 31:28, reserved
//Bit 27:24, reg_mcdi_qmechkedgelpfmsk0.           lpf mask0 for chk edge in qme, 0~8, msk1 = (8-msk0), normalized to 8 as '1', default = 7
//Bit 23:20, reserved
//Bit 19:16, reg_mcdi_qmebslpfmsk0.                lpf mask0 for bs in qme, 0~8, msk1 = (8-msk0), normalized to 8 as '1', default = 7
//Bit 15:12, reserved
//Bit 11: 8, reg_mcdi_qmebadwlpfmsk0.              lpf mask0 for badw in qme, 0~8, msk1 = (8-msk0), normalized to 8 as '1', default = 7
//Bit  7: 4, reserved
//Bit  3: 0, reg_mcdi_qmesadlpfmsk0.               lpf mask0 for sad in qme, 0~8, msk1 = (8-msk0), normalized to 8 as '1', default = 7
#define MCDI_REL_DIF_THD_02                        ((0x2f1f  << 2) + 0xff900000)
//Bit 31:24, reserved.
//Bit 23:16, reg_mcdi_reldifthd2.                  thd (<) for (hdif+vdif), default = 9
//Bit 15: 8, reg_mcdi_reldifthd1.                  thd (<) for (vdif), default = 5
//Bit  7: 0, reg_mcdi_reldifthd0.                  thd (>=) for (hdif-vdif), default = 48
#define MCDI_REL_DIF_THD_34                        ((0x2f20  << 2) + 0xff900000)
//Bit 31:16, reserved.
//Bit 15: 8, reg_mcdi_reldifthd4.                  thd (<) for (hdif), default = 255
//Bit  7: 0, reg_mcdi_reldifthd3.                  thd (>=) for (vdif-hdif), default = 48
#define MCDI_REL_BADW_GAIN_OFFST_01                ((0x2f21  << 2) + 0xff900000)
//Bit 31:24, reg_mcdi_relbadwoffst1.               offset for badw adj, for flat block, -128~127, default = 0
//Bit 23:16, reg_mcdi_relbadwgain1.                gain for badw adj, for flat block, default = 128
//Bit 15: 8, reg_mcdi_relbadwoffst0.               offset for badw adj, for vertical block, -128~127, default = 0
//Bit  7: 0, reg_mcdi_relbadwgain0.                gain for badw adj, for vertical block, default = 160
#define MCDI_REL_BADW_GAIN_OFFST_23                ((0x2f22  << 2) + 0xff900000)
//Bit 31:24, reg_mcdi_relbadwoffst3.               offset for badw adj, for other block, -128~127, default = 0
//Bit 23:16, reg_mcdi_relbadwgain3.                gain for badw adj, for other block, default = 48
//Bit 15: 8, reg_mcdi_relbadwoffst2.               offset for badw adj, for horizontal block, -128~127, default = 0
//Bit  7: 0, reg_mcdi_relbadwgain2.                gain for badw adj, for horizontal block, default = 48
#define MCDI_REL_BADW_THD_GAIN_OFFST               ((0x2f23  << 2) + 0xff900000)
//Bit 31:23, reserved.
//Bit 22:16, reg_mcdi_relbadwoffst.                offset for badw thd adj, -64~63, default = 0
//Bit 15: 8, reserved.
//Bit  7: 0, reg_mcdi_relbadwthdgain.              gain0 for badw thd adj, normalized to 16 as '1', default = 16
#define MCDI_REL_BADW_THD_MIN_MAX                  ((0x2f24  << 2) + 0xff900000)
//Bit 31:18, reserved.
//Bit 17: 8, reg_mcdi_relbadwthdmax.               max for badw thd adj, default = 256
//Bit  7: 0, reg_mcdi_relbadwthdmin.               min for badw thd adj, default = 16
#define MCDI_REL_SAD_GAIN_OFFST_01                 ((0x2f25  << 2) + 0xff900000)
//Bit 31:24, reg_mcdi_relsadoffst1.                offset for sad adj, for flat block, -128~127, default = 0
//Bit 23:20, reserved.
//Bit 19:16, reg_mcdi_relsadgain1.                 gain for sad adj, for flat block, normalized to 8 as '1', default = 8
//Bit 15: 8, reg_mcdi_relsadoffst0.                offset for sad adj, for vertical block, -128~127, default = 0
//Bit  7: 4, reserved.
//Bit  3: 0, reg_mcdi_relsadgain0.                 gain for sad adj, for vertical block, normalized to 8 as '1', default = 6
#define MCDI_REL_SAD_GAIN_OFFST_23                 ((0x2f26  << 2) + 0xff900000)
//Bit 31:24, reg_mcdi_relsadoffst3.                offset for sad adj, for other block, -128~127, default = 0
//Bit 23:20, reserved.
//Bit 19:16, reg_mcdi_relsadgain3.                 gain for sad adj, for other block, normalized to 8 as '1', default = 8
//Bit 15: 8, reg_mcdi_relsadoffst2.                offset for sad adj, for horizontal block, -128~127, default = 0
//Bit  7: 4, reserved.
//Bit  3: 0, reg_mcdi_relsadgain2.                 gain for sad adj, for horizontal block, normalized to 8 as '1', default = 12
#define MCDI_REL_SAD_THD_GAIN_OFFST                ((0x2f27  << 2) + 0xff900000)
//Bit 31:24, reserved.
//Bit 23:16, reg_mcdi_relsadoffst.                 offset for sad thd adj, -128~127, default = 0
//Bit 15:10, reserved.
//Bit  9: 0, reg_mcdi_relsadthdgain.               gain for sad thd adj, 21*2/16, normalized to 16 as '1', default = 42
#define MCDI_REL_SAD_THD_MIN_MAX                   ((0x2f28  << 2) + 0xff900000)
//Bit 31:27, reserved.
//Bit 26:16, reg_mcdi_relsadthdmax.                max for sad thd adj, 21*32, default = 672
//Bit 15: 9, reserved.
//Bit  8: 0, reg_mcdi_relsadthdmin.                min for sad thd adj, 21*2, default = 42
#define MCDI_REL_DET_GAIN_00                       ((0x2f29  << 2) + 0xff900000)
//Bit 31:21, reserved.
//Bit 20:16, reg_mcdi_reldetbsgain0.               gain0 (gmv locked) for bs, for det. calc. normalized to 16 as '1', default = 8
//Bit 15:14, reserved.
//Bit 13: 8, reg_mcdi_reldetbadwgain0.             gain0 (gmv locked) for badw, for det. calc. normalized to 16 as '1', default = 12
//Bit  7: 5, reserved.
//Bit  4: 0, reg_mcdi_reldetsadgain0.              gain0 (gmv locked) for qsad, for det. calc. normalized to 16 as '1', default = 8
#define MCDI_REL_DET_GAIN_01                       ((0x2f2a  << 2) + 0xff900000)
//Bit 31:14, reserved.
//Bit 12: 8, reg_mcdi_reldetchkedgegain0.          gain0 (gmv locked) for chk_edge, for det. calc. normalized to 16 as '1', default = 2
//Bit     7, reserved.
//Bit  6: 0, reg_mcdi_reldetnbrdstgain0.           gain0 (gmv locked) for neighoring dist, for det. calc. normalized to 16 as '1', default = 24
#define MCDI_REL_DET_GAIN_10                       ((0x2f2b  << 2) + 0xff900000)
//Bit 31:21, reserved.
//Bit 20:16, reg_mcdi_reldetbsgain1.               gain1 (lmv locked) for bs, for det. calc. normalized to 16 as '1', default = 0
//Bit 15:14, reserved.
//Bit 13: 8, reg_mcdi_reldetbadwgain1.             gain1 (lmv locked) for badw, for det. calc. normalized to 16 as '1', default = 8
//Bit  7: 5, reserved.
//Bit  4: 0, reg_mcdi_reldetsadgain1.              gain1 (lmv locked) for qsad, for det. calc. normalized to 16 as '1', default = 8
#define MCDI_REL_DET_GAIN_11                       ((0x2f2c  << 2) + 0xff900000)
//Bit 31:14, reserved.
//Bit 12: 8, reg_mcdi_reldetchkedgegain1.          gain1 (lmv locked) for chk_edge, for det. calc. normalized to 16 as '1', default = 0
//Bit     7, reserved.
//Bit  6: 0, reg_mcdi_reldetnbrdstgain1.           gain1 (lmv locked) for neighoring dist, for det. calc. normalized to 16 as '1', default = 24
#define MCDI_REL_DET_GAIN_20                       ((0x2f2d  << 2) + 0xff900000)
//Bit 31:21, reserved.
//Bit 20:16, reg_mcdi_reldetbsgain2.               gain2 (no locked) for bs, for det. calc. normalized to 16 as '1', default = 12
//Bit 15:14, reserved.
//Bit 13: 8, reg_mcdi_reldetbadwgain2.             gain2 (no locked) for badw, for det. calc. normalized to 16 as '1', default = 32
//Bit  7: 5, reserved.
//Bit  4: 0, reg_mcdi_reldetsadgain2.              gain2 (no locked) for qsad, for det. calc. normalized to 16 as '1', default = 16
#define MCDI_REL_DET_GAIN_21                       ((0x2f2e  << 2) + 0xff900000)
//Bit 31:26, reserved
//Bit 25:16, reg_mcdi_reldetoffst.                 offset for rel calculation, for det. calc. -512~511,  default = 0
//Bit 15:14, reserved.
//Bit 12: 8, reg_mcdi_reldetchkedgegain2.          gain2 (no locked) for chk_edge, for det. calc. normalized to 16 as '1', default = 10
//Bit     7, reserved.
//Bit  6: 0, reg_mcdi_reldetnbrdstgain2.           gain2 (no locked) for neighoring dist, for det. calc. normalized to 16 as '1', default = 32
#define MCDI_REL_DET_GMV_DIF_CHK                   ((0x2f2f  << 2) + 0xff900000)
//Bit 31:24, reserved.
//Bit 23:16, reg_mcdi_reldetgmvfltthd.             flat thd (>=) for gmv lock decision, default = 0
//Bit    15, reserved.
//Bit 14:12, reg_mcdi_reldetgmvdifthd.             dif thd (>=) for current mv different from gmv for gmv dif check, actually used in Lmv lock check, default = 3
//Bit    11, reserved.
//Bit 10: 8, reg_mcdi_reldetgmvdifmin.             min mv dif for gmv dif check, default = 1, note: dif between reg_mcdi_rel_det_gmv_dif_max and reg_mcdi_rel_det_gmv_dif_min should be; 0,1,3,7, not work for others
//Bit  7: 4, reg_mcdi_reldetgmvdifmax.             max mv dif for gmv dif check, default = 4
//Bit  3: 1, reserved
//Bit     0, reg_mcdi_reldetgmvdifmvmode.          mv mode used for gmv dif check, 0: use refmv, 1: use qmv, default = 0
#define MCDI_REL_DET_LMV_DIF_CHK                   ((0x2f30  << 2) + 0xff900000)
//Bit 31:24, reserved.
//Bit 23:16, reg_mcdi_reldetlmvfltthd.             flat thd (>=) for lmv lock decision, default = 12
//Bit 15:14, reserved.
//Bit 13:12, reg_mcdi_reldetlmvlockchkmode.        lmv lock check mode, 0:cur Lmv, 1: cur & (last | next), 2: last & cur & next Lmv, default = 1
//Bit    11, reserved.
//Bit 10: 8, reg_mcdi_reldetlmvdifmin.             min mv dif for lmv dif check, default = 1, note: dif between reg_mcdi_rel_det_lmv_dif_max and reg_mcdi_rel_det_lmv_dif_min should be; 0,1,3,7, not work for others
//Bit  7: 4, reg_mcdi_reldetlmvdifmax.             max mv dif for lmv dif check, default = 4
//Bit  3: 1, reserved
//Bit     0, reg_mcdi_reldetlmvdifmvmode.          mv mode used for lmv dif check, 0: use refmv, 1: use qmv, default = 0
#define MCDI_REL_DET_FRQ_CHK                       ((0x2f31  << 2) + 0xff900000)
//Bit 31:12, reserved.
//Bit 11: 8, reg_mcdi_reldetfrqgain.               gain for frequency check, normalized to 4 as '1', default = 10
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_reldetfrqmax.                max value for frequency check, default = 31
#define MCDI_REL_DET_PD22_CHK                      ((0x2f32  << 2) + 0xff900000)
//Bit 31:18, reserved.
//Bit 17: 8, reg_mcdi_reldetpd22chkoffst.          offset for pd22 check happened, default = 512
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_reldetpd22chkgain.           gain for pd22 check happened, normalized to 8 as '1', default = 12
#define MCDI_REL_DET_RPT_CHK_ROW                   ((0x2f33  << 2) + 0xff900000)
//Bit 31:27, reserved
//Bit 26:16, reg_mcdi_reldetrptchkendrow.          end row (<) number for repeat check, default = 2047
//Bit 15:11, reserved
//Bit 10: 0, reg_mcdi_reldetrptchkstartrow.        start row (>=) number for repeat check, default = 0
#define MCDI_REL_DET_RPT_CHK_GAIN_QMV              ((0x2f34  << 2) + 0xff900000)
//Bit 31:30, reserved
//Bit 29:24, reg_mcdi_reldetrptchkqmvmax.          max thd (<) of abs qmv for repeat check, default = 15, note that quarter mv's range is -63~63
//Bit 23:22, reserved
//Bit 21:16, reg_mcdi_reldetrptchkqmvmin.          min thd (>=) of abs qmv for repeat check, default = 10, note that quarter mv's range is -63~63
//Bit    15, reserved/
//Bit 14: 4, reg_mcdi_reldetrptchkoffst.           offset for repeat check, default = 512
//Bit  3: 0, reg_mcdi_reldetrptchkgain.            gain for repeat check, normalized to 8 as '1', default = 4
#define MCDI_REL_DET_RPT_CHK_THD_0                 ((0x2f35  << 2) + 0xff900000)
//Bit 31:24, reserved
//Bit 23:16, reg_mcdi_reldetrptchkzerosadthd.      zero sad thd (<) for repeat check, default = 255
//Bit 15:14, reserved.
//Bit 13: 8, reg_mcdi_reldetrptchkzerobadwthd.     zero badw thd (>=) for repeat check, default = 16
//Bit  7: 4, reserved
//Bit  3: 0, reg_mcdi_reldetrptchkfrqdifthd.       frequency dif thd (<) for repeat check, 0~10, default = 5
#define MCDI_REL_DET_RPT_CHK_THD_1                 ((0x2f36  << 2) + 0xff900000)
//Bit 31:16, reserved
//Bit 15: 8, reg_mcdi_reldetrptchkvdifthd.         vertical dif thd (<) for repeat check, default = 16
//Bit  7: 0, reg_mcdi_reldetrptchkhdifthd.         horizontal dif thd (>=) for repeat check, default = 16
#define MCDI_REL_DET_LPF_DIF_THD                   ((0x2f37  << 2) + 0xff900000)
//Bit 31:24, reg_mcdi_reldetlpfdifthd3.            hdif thd (<) for lpf selection of horizontal block, default = 9
//Bit 23:16, reg_mcdi_reldetlpfdifthd2.            vdif-hdif thd (>=) for lpf selection of horizontal block, default = 48
//Bit 15: 8, reg_mcdi_reldetlpfdifthd1.            vdif thd (<) for lpf selection of vertical block, default = 9
//Bit  7: 0, reg_mcdi_reldetlpfdifthd0.            hdif-vdif thd (>=) for lpf selection of vertical block, default = 48
#define MCDI_REL_DET_LPF_MSK_00_03                 ((0x2f38  << 2) + 0xff900000)
//Bit 31:29, reserved
//Bit 28:24, reg_mcdi_reldetlpfmsk03.              det lpf mask03 for gmv/lmv locked mode, 0~16, default = 1
//Bit 23:21, reserved
//Bit 20:16, reg_mcdi_reldetlpfmsk02.              det lpf mask02 for gmv/lmv locked mode, 0~16, default = 1
//Bit 15:13, reserved
//Bit 12: 8, reg_mcdi_reldetlpfmsk01.              det lpf mask01 for gmv/lmv locked mode, 0~16, default = 5
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_reldetlpfmsk00.              det lpf mask00 for gmv/lmv locked mode, 0~16, default = 8
#define MCDI_REL_DET_LPF_MSK_04_12                 ((0x2f39  << 2) + 0xff900000)
//Bit 31:29, reserved
//Bit 28:24, reg_mcdi_reldetlpfmsk12.              det lpf mask12 for vertical blocks, 0~16, default = 0
//Bit 23:21, reserved
//Bit 20:16, reg_mcdi_reldetlpfmsk11.              det lpf mask11 for vertical blocks, 0~16, default = 0
//Bit 15:13, reserved
//Bit 12: 8, reg_mcdi_reldetlpfmsk10.              det lpf mask10 for vertical blocks, 0~16, default = 16
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_reldetlpfmsk04.              det lpf mask04 for gmv/lmv locked mode, 0~16, default = 1
#define MCDI_REL_DET_LPF_MSK_13_21                 ((0x2f3a  << 2) + 0xff900000)
//Bit 31:29, reserved
//Bit 28:24, reg_mcdi_reldetlpfmsk21.              det lpf mask21 for horizontal blocks, 0~16, default = 6
//Bit 23:21, reserved
//Bit 20:16, reg_mcdi_reldetlpfmsk20.              det lpf mask20 for horizontal blocks, 0~16, default = 8
//Bit 15:13, reserved
//Bit 12: 8, reg_mcdi_reldetlpfmsk14.              det lpf mask14 for vertical blocks, 0~16, default = 0
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_reldetlpfmsk13.              det lpf mask13 for vertical blocks, 0~16, default = 0
#define MCDI_REL_DET_LPF_MSK_22_30                 ((0x2f3b  << 2) + 0xff900000)
//Bit 31:29, reserved
//Bit 28:24, reg_mcdi_reldetlpfmsk30.              det lpf mask30 for other blocks, 0~16, default = 16
//Bit 23:21, reserved
//Bit 20:16, reg_mcdi_reldetlpfmsk24.              det lpf mask24 for horizontal blocks, 0~16, default = 1
//Bit 15:13, reserved
//Bit 12: 8, reg_mcdi_reldetlpfmsk23.              det lpf mask23 for horizontal blocks, 0~16, default = 0
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_reldetlpfmsk22.              det lpf mask22 for horizontal blocks, 0~16, default = 1
#define MCDI_REL_DET_LPF_MSK_31_34                 ((0x2f3c  << 2) + 0xff900000)
//Bit 31:29, reserved
//Bit 28:24, reg_mcdi_reldetlpfmsk34.              det lpf mask34 for other blocks, 0~16, default = 0
//Bit 23:21, reserved
//Bit 20:16, reg_mcdi_reldetlpfmsk33.              det lpf mask33 for other blocks, 0~16, default = 0
//Bit 15:13, reserved
//Bit 12: 8, reg_mcdi_reldetlpfmsk32.              det lpf mask32 for other blocks, 0~16, default = 0
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_reldetlpfmsk31.              det lpf mask31 for other blocks, 0~16, default = 0
//Note: there are four group lpf masks from addr 37~3b, each group sum equal to 16.
#define MCDI_REL_DET_MIN                           ((0x2f3d  << 2) + 0xff900000)
//Bit 31: 7, reserved
//Bit  6: 0, reg_mcdi_reldetmin.                   min of detected value, default = 16
#define MCDI_REL_DET_LUT_0_3                       ((0x2f3e  << 2) + 0xff900000)
//Bit 31:24, reg_mcdi_reldetmaplut3.               default = 8
//Bit 23:16, reg_mcdi_reldetmaplut2.               default = 4
//Bit 15: 8, reg_mcdi_reldetmaplut1.               default = 2
//Bit  7: 0, reg_mcdi_reldetmaplut0.               default = 0
#define MCDI_REL_DET_LUT_4_7                       ((0x2f3f  << 2) + 0xff900000)
//Bit 31:24, reg_mcdi_reldetmaplut7.               default = 64
//Bit 23:16, reg_mcdi_reldetmaplut6.               default = 48
//Bit 15: 8, reg_mcdi_reldetmaplut5.               default = 32
//Bit  7: 0, reg_mcdi_reldetmaplut4.               default = 16
#define MCDI_REL_DET_LUT_8_11                      ((0x2f40  << 2) + 0xff900000)
//Bit 31:24, reg_mcdi_reldetmaplut11.              default = 160
//Bit 23:16, reg_mcdi_reldetmaplut10.              default = 128
//Bit 15: 8, reg_mcdi_reldetmaplut9.               default = 96
//Bit  7: 0, reg_mcdi_reldetmaplut8.               default = 80
#define MCDI_REL_DET_LUT_12_15                     ((0x2f41  << 2) + 0xff900000)
//Bit 31:24, reg_mcdi_reldetmaplut15.              default = 255
//Bit 23:16, reg_mcdi_reldetmaplut14.              default = 240
//Bit 15: 8, reg_mcdi_reldetmaplut13.              default = 224
//Bit  7: 0, reg_mcdi_reldetmaplut12.              default = 192
#define MCDI_REL_DET_COL_CFD_THD                   ((0x2f42  << 2) + 0xff900000)
//Bit 31:24, reg_mcdi_reldetcolcfdfltthd.          thd for flat smaller than (<) of column cofidence, default = 5
//Bit 23:16, reg_mcdi_reldetcolcfdthd1.            thd for rel larger than (>=) in rel calc. mode col confidence without gmv locking, default = 160
//Bit 15: 8, reg_mcdi_reldetcolcfdthd0.            thd for rel larger than (>=) in rel calc. mode col confidence when gmv locked, default = 100
//Bit  7: 2, reg_mcdi_reldetcolcfdbadwthd.         thd for badw larger than (>=) in qbadw calc. mode of column cofidence, default = 16
//Bit     1, reserved
//Bit     0, reg_mcdi_reldetcolcfdcalcmode.        calc. mode for column cofidence, 0: use rel, 1: use qbadw, default = 0
#define MCDI_REL_DET_COL_CFD_AVG_LUMA              ((0x2f43  << 2) + 0xff900000)
//Bit 31:24, reg_mcdi_reldetcolcfdavgmin1.         avg luma min1 (>=) for column cofidence, valid between 16~235, default = 235
//Bit 23:16, reg_mcdi_reldetcolcfdavgmax1.         avg luma max1 (<)  for column cofidence, valid between 16~235, default = 235
//Bit 15: 8, reg_mcdi_reldetcolcfdavgmin0.         avg luma min0 (>=) for column cofidence, valid between 16~235, default = 16
//Bit  7: 0, reg_mcdi_reldetcolcfdavgmax0.         avg luma max0 (<)  for column cofidence, valid between 16~235, default = 21
#define MCDI_REL_DET_BAD_THD_0                     ((0x2f44  << 2) + 0xff900000)
//Bit 31:16, reserved
//Bit 15: 8, reg_mcdi_reldetbadsadthd.             thd (>=) for bad sad, default = 120 (480/4)
//Bit  7: 6, reserved
//Bit  5: 0, reg_mcdi_reldetbadbadwthd.            thd (>=) for bad badw, 0~42, default = 12
#define MCDI_REL_DET_BAD_THD_1                     ((0x2f45  << 2) + 0xff900000)
//Bit 31:24, reserved
//Bit 23:16, reg_mcdi_reldetbadrelfltthd.          thd (>=) of flat for bad rel detection, default = 4
//Bit 15: 8, reg_mcdi_reldetbadrelthd1.            thd (>=) for bad rel without gmv/lmv locked, default = 160
//Bit  7: 0, reg_mcdi_reldetbadrelthd0.            thd (>=) for bad rel with gmv/lmv locked, default = 120
#define MCDI_PD22_CHK_THD                          ((0x2f46  << 2) + 0xff900000)
//Bit 31:25, reserved
//Bit 24:16, reg_mcdi_pd22chksaddifthd.            sad dif thd (>=) for (pd22chksad - qsad) for pd22 check, default = 64
//Bit 15:14, reserved
//Bit 13: 8, reg_mcdi_pd22chkqmvthd.               thd (>=) of abs qmv for pd22 check, default = 2
//Bit  7: 0, reg_mcdi_pd22chkfltthd.               thd (>=) of flat for pd22 check, default = 4
#define MCDI_PD22_CHK_GAIN_OFFST_0                 ((0x2f47  << 2) + 0xff900000)
//Bit 31:24, reg_mcdi_pd22chkedgeoffst0.           offset0 of pd22chkedge from right film22 phase, -128~127, default = 0
//Bit 23:21, reserved
//Bit 20:16, reg_mcdi_pd22chkedgegain0.            gain0 of pd22chkedge from right film22 phase, normalized to 16 as '1', default = 16
//Bit 15:12, reserved
//Bit 11: 8, reg_mcdi_pd22chkbadwoffst0.           offset0 of pd22chkbadw from right film22 phase, -8~7, default = 0
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_pd22chkbadwgain0.            gain0 of pd22chkbadw from right film22 phase, normalized to 16 as '1', default = 8
#define MCDI_PD22_CHK_GAIN_OFFST_1                 ((0x2f48  << 2) + 0xff900000)
//Bit 31:24, reg_mcdi_pd22chkedgeoffst1.           offset1 of pd22chkedge from right film22 phase, -128~127, default = 0
//Bit 23:21, reserved
//Bit 20:16, reg_mcdi_pd22chkedgegain1.            gain1 of pd22chkedge from right film22 phase, normalized to 16 as '1', default = 16
//Bit 15:12, reserved
//Bit 11: 8, reg_mcdi_pd22chkbadwoffst1.           offset1 of pd22chkbadw from right film22 phase, -8~7, default = 0
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_pd22chkbadwgain1.            gain1 of pd22chkbadw from right film22 phase, normalized to 16 as '1', default = 12
#define MCDI_LMV_LOCK_CNT_THD_GAIN                 ((0x2f49  << 2) + 0xff900000)
//Bit 31:20, reserved
//Bit 19:16, reg_mcdi_lmvlockcntmax.               max lmv lock count number, default = 6
//Bit 15:12, reg_mcdi_lmvlockcntoffst.             offset for lmv lock count, -8~7, default =  0
//Bit 11: 8, reg_mcdi_lmvlockcntgain.              gain for lmv lock count, normalized 8 as '1', 15 is set to 16, default = 8
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_lmvlockcntthd.               lmv count thd (>=) before be locked, 1~31, default = 4
#define MCDI_LMV_LOCK_ABS_DIF_THD                  ((0x2f4a  << 2) + 0xff900000)
//Bit 31:27, reserved
//Bit 26:24, reg_mcdi_lmvlockdifthd2.              lmv dif thd for third part, before locked, default = 1
//Bit    23, reserved
//Bit 22:20, reg_mcdi_lmvlockdifthd1.              lmv dif thd for second part, before locked, default = 1
//Bit    19, reserved
//Bit 18:16, reg_mcdi_lmvlockdifthd0.              lmv dif thd for first part, before locked, default = 1
//Bit 15:13, reserved
//Bit 12: 8, reg_mcdi_lmvlockabsmax.               max abs (<) of lmv to be locked, default = 24
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_lmvlockabsmin.               min abs (>=) of lmv to be locked, default = 1
#define MCDI_LMV_LOCK_ROW                          ((0x2f4b  << 2) + 0xff900000)
//Bit 31:27, reserved
//Bit 26:16, reg_mcdi_lmvlockendrow.               end row (<) for lmv lock, default = 2047
//Bit 15:11, reserved
//Bit 10: 0, reg_mcdi_lmvlockstartrow.             start row (>=) for lmv lock, default = 0
#define MCDI_LMV_LOCK_RT_MODE                      ((0x2f4c  << 2) + 0xff900000)
//Bit 31:27, reserved
//Bit 26:24, reg_mcdi_lmvlockextmode.              extend lines for lmv lock check, check how many lines for lmv locking, default = 2
//Bit 23:16, reg_mcdi_lmvlockfltcntrt.             ratio of flt cnt for lock check, normalized 256 as '1', 255 is set to 256, default = 32
//Bit 15: 8, reg_mcdi_lmvlocklmvcntrt1.            ratio when use non-zero lmv for lock check, normalized 256 as '1', 255 is set to 256, default = 48
//Bit  7: 0, reg_mcdi_lmvlocklmvcntrt0.            ratio when use max lmv for lock check, normalized 256 as '1', 255 is set to 256, default = 106
#define MCDI_GMV_LOCK_CNT_THD_GAIN                 ((0x2f4d  << 2) + 0xff900000)
//Bit 31:20, reserved
//Bit 19:16, reg_mcdi_gmvlockcntmax.               max gmv lock count number, default = 6
//Bit 15:12, reg_mcdi_gmvlockcntoffst.             offset for gmv lock count, -8~7, default =  0
//Bit 11: 8, reg_mcdi_gmvlockcntgain.              gain for gmv lock count, normalized 8 as '1', 15 is set to 16, default = 8
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_gmvlockcntthd.               gmv count thd (>=) before be locked, 1~31, default = 4
#define MCDI_GMV_LOCK_ABS_DIF_THD                  ((0x2f4e  << 2) + 0xff900000)
//Bit 31:27, reserved
//Bit 26:24, reg_mcdi_gmvlockdifthd2.              gmv dif thd for third part, before locked, default = 3
//Bit    23, reserved
//Bit 22:20, reg_mcdi_gmvlockdifthd1.              gmv dif thd for second part, before locked, default = 2
//Bit    19, reserved
//Bit 18:16, reg_mcdi_gmvlockdifthd0.              gmv dif thd for first part, before locked, default = 1
//Bit 15:13, reserved
//Bit 12: 8, reg_mcdi_gmvlockabsmax.               max abs of gmv to be locked, default = 15
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_gmvlockabsmin.               min abs of gmv to be locked, default = 1
#define MCDI_HIGH_VERT_FRQ_DIF_THD                 ((0x2f4f  << 2) + 0xff900000)
//Bit 31: 0, reg_mcdi_highvertfrqfldavgdifthd.     high_vert_frq field average luma dif thd (>=), 3*Blk_Width*Blk_Height, set by software, default = 103680
#define MCDI_HIGH_VERT_FRQ_DIF_DIF_THD             ((0x2f50  << 2) + 0xff900000)
//Bit 31: 0, reg_mcdi_highvertfrqfldavgdifdifthd.  high_vert_frq field average luma dif's dif thd (<), 3*Blk_Width*Blk_Height, set by software, default = 103680
#define MCDI_HIGH_VERT_FRQ_RT_GAIN                 ((0x2f51  << 2) + 0xff900000)
//Bit 31:20, reserved
//Bit 19:16, reg_mcdi_highvertfrqcntthd.           high_vert_frq count thd (>=) before locked, 1~31, default = 4
//Bit 15: 8, reg_mcdi_highvertfrqbadsadrt.         ratio for high_vert_frq bad sad count, normalized 256 as '1', 255 is set to 256, default = 24
//Bit  7: 0, reg_mcdi_highvertfrqbadbadwrt.        ratio for high_vert_frq badw count, normalized 256 as '1', 255 is set to 256, default = 130
#define MCDI_MOTION_PARADOX_THD                    ((0x2f52  << 2) + 0xff900000)
//Bit 31:29, reserved
//Bit 28:24, reg_mcdi_motionparadoxcntthd.         motion paradox count thd (>=) before locked, 1~31, default = 4
//Bit 23:22, reserved
//Bit 21:16, reg_mcdi_motionparadoxgmvthd.         abs gmv thd (<) of motion paradox, 0~32, note that 32 means invalid gmv, be careful, default = 32
//Bit 15: 0, reserved
#define MCDI_MOTION_PARADOX_RT                     ((0x2f53  << 2) + 0xff900000)
//Bit 31:24, reserved
//Bit 23:16, reg_mcdi_motionparadoxbadsadrt.       ratio for field bad sad count of motion paradox, normalized 256 as '1', 255 is set to 256, default = 24
//Bit 15: 8, reg_mcdi_motionparadoxbadrelrt.       ratio for field bad reliabilty count of motion paradox, normalized 256 as '1', 255 is set to 256, default = 120
//Bit  7: 0, reg_mcdi_motionparadoxmtnrt.          ratio for field motion count of motion paradox, normalized 256 as '1', 255 is set to 256, default = 218
#define MCDI_MOTION_REF_THD                        ((0x2f54  << 2) + 0xff900000)
//Bit 31:24, reserved
//Bit 23:20, reg_mcdi_motionrefoffst.              motion ref additive offset, default = 15
//Bit 19:16, reg_mcdi_motionrefgain.               motion ref gain, normalized 8 as '1', default = 8
//Bit 15:13, reserved
//Bit 12: 8, reg_mcdi_motionrefrptmvthd.           abs thd (>=) of rpt mv (0~31, 32 means invalid) for motion ref, default = 1
//Bit  7: 2, reg_mcdi_motionrefqmvthd.             min thd (>=) of abs qmv for motion ref, note that quarter mv's range is -63~63, default = 2
//Bit  1: 0, reg_mcdi_motionreflpfmode.            Mv and (8 x repeat flg) 's lpf mode of motion refinement, 0: no lpf, 1: [1 2 1], 2: [1 2 2 2 1], default = 1
#define MCDI_REL_COL_REF_RT                        ((0x2f55  << 2) + 0xff900000)
//Bit 31: 8, reserved
//Bit  7: 0, reg_mcdi_relcolrefrt.                 ratio for column cofidence level against column number, for refinement, default = 135
#define MCDI_PD22_CHK_THD_RT                       ((0x2f56  << 2) + 0xff900000)
//Bit 31:27, reserved
//Bit 26:16, reg_mcdi_pd22chkfltcntrt.             ratio for flat count of field pulldown 22 check, normalized 2048 as '1', 2047 is set to 2048, default = 1
//Bit 15: 8, reg_mcdi_pd22chkcntrt.                ratio of pulldown 22 check count, normalized 256 as '1', 255 is set to 256, default = 100
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_pd22chkcntthd.               thd (>=) for pd22 count before locked, 1~31, default = 4
#define MCDI_CHAR_DET_DIF_THD                      ((0x2f57  << 2) + 0xff900000)
//Bit 31:24, reserved
//Bit 23:16, reg_mcdi_chardetminmaxdifthd.         thd (>=) for dif between min and max value, default = 64
//Bit 15: 8, reg_mcdi_chardetmaxdifthd.            thd (<) for dif between max value, default = 17
//Bit  7: 0, reg_mcdi_chardetmindifthd.            thd (<) for dif between min value, default = 17
#define MCDI_CHAR_DET_CNT_THD                      ((0x2f58  << 2) + 0xff900000)
//Bit 31:21, reserved
//Bit 20:16, reg_mcdi_chardettotcntthd.            thd (>=) for total count, 0~21, default = 18
//Bit 15:13, reserved
//Bit 12: 8, reg_mcdi_chardetmaxcntthd.            thd (>=) for max count, 0~21, default = 1
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_chardetmincntthd.            thd (>=) for min count, 0~21, default = 1
//new add
#define MCDI_PD_22_CHK_WND0_X                      ((0x2f59  << 2) + 0xff900000)
//Bit 31:29, reserved
//Bit 28:16, reg_mcdi_pd22chkwnd0_x1                 u13, x1 for window 0, HSIZE-1, software control, default = 719
//Bit 15:13, reserved
//Bit 12: 0, reg_mcdi_pd22chkwnd0_x0                 u13, x0 for window 0, software control, default = 0
#define MCDI_PD_22_CHK_WND0_Y                      ((0x2f5a  << 2) + 0xff900000)
//Bit 31:29, reserved
//Bit 28:16, reg_mcdi_pd22chkwnd0_y1                 u13, y1 for window 0  software control, default = 39
//Bit 15:13, reserved
//Bit 12: 0, reg_mcdi_pd22chkwnd0_y0                 u13, y0 for window 0, software control, default = 0
#define MCDI_PD_22_CHK_WND1_X                      ((0x2f5b  << 2) + 0xff900000)
//Bit 31:29, reserved
//Bit 28:16, reg_mcdi_pd22chkwnd1_x1                 u13, x1 for window 1, HSIZE-1, software control, default = 719
//Bit 15:13, reserved
//Bit 12: 0, reg_mcdi_pd22chkwnd1_x0                 u13, x0 for window 1, software control, default = 0
#define MCDI_PD_22_CHK_WND1_Y                      ((0x2f5c  << 2) + 0xff900000)
//Bit 31:29, reserved
//Bit 28:16, reg_mcdi_pd22chkwnd1_y1                 u13, y1 for window 1  software control, default = 199
//Bit 15:13, reserved
//Bit 12: 0, reg_mcdi_pd22chkwnd1_y0                 u13, y0 for window 1, software control, default = 40
#define MCDI_PD_22_CHK_FRC_LMV                     ((0x2f5d  << 2) + 0xff900000)
//Bit 31:11, reserved
//Bit    10, reg_mcdi_pd22chklmvchk2               u1, lmv lock check while force vof for each windows, default = 1
//Bit     9, reg_mcdi_pd22chklmvchk1               u1, lmv lock check while force vof for each windows, default = 0
//Bit     8, reg_mcdi_pd22chklmvchk0               u1, lmv lock check while force vof for each windows, default = 0
//Bit     7, reserved
//Bit     6, reg_mcdi_pd22chkfrcpd2                u1, force pd flags for each windows, default = 0
//Bit     5, reg_mcdi_pd22chkfrcpd1                u1, force pd flags for each windows, default = 0
//Bit     4, reg_mcdi_pd22chkfrcpd0                u1, force pd flags for each windows, default = 0
//Bit     3, reserved
//Bit     2, reg_mcdi_pd22chkfrcvof2               u1, force vof flags for each windows, default = 1
//Bit     1, reg_mcdi_pd22chkfrcvof1               u1, force vof flags for each windows, default = 0
//Bit     0, reg_mcdi_pd22chkfrcvof0               u1, force vof flags for each windows, default = 0
#define MCDI_PD_22_CHK_FLG_CNT                     ((0x2f5e  << 2) + 0xff900000)
//Bit 31:27, reserved.
//Bit    26, reg_mcdi_pd22chkflg2.                     pull down 22 flag of prevoius one field. initial = 0
//Bit    25, reg_mcdi_pd22chkflg1.                     pull down 22 flag of prevoius one field. initial = 0
//Bit    24, reg_mcdi_pd22chkflg.                      pull down 22 flag of prevoius one field. initial = 0
//Bit 23:16, reg_mcdi_pd22chkcnt2.                     pull down 22 count till prevoius one field. initial = 0
//Bit 15: 8, reg_mcdi_pd22chkcnt1.                     pull down 22 count till prevoius one field. initial = 0
//Bit  7: 0, reg_mcdi_pd22chkcnt.                      pull down 22 count till prevoius one field. initial = 0
#define MCDI_RO_FLD_PD_22_PRE_CNT1                 ((0x2fca  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_fldpd22precnt1.              prevoius pd22 check count of whole pre one field (block based). initial = 0
#define MCDI_RO_FLD_PD_22_FOR_CNT1                 ((0x2fcb  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_fldpd22forcnt1.              forward pd22 check count of whole pre one field (block based). initial = 0
#define MCDI_RO_FLD_PD_22_FLT_CNT1                 ((0x2fcc  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_fldpd22fltcnt1.              flat count (for pd22 check) of whole pre one field (block based). initial = 0
#define MCDI_RO_FLD_PD_22_PRE_CNT2                 ((0x2fcd  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_fldpd22precnt2.              prevoius pd22 check count of whole pre one field (block based). initial = 0
#define MCDI_RO_FLD_PD_22_FOR_CNT2                 ((0x2fce  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_fldpd22forcnt2.              forward pd22 check count of whole pre one field (block based). initial = 0
#define MCDI_RO_FLD_PD_22_FLT_CNT2                 ((0x2fcf  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_fldpd22fltcnt2.              flat count (for pd22 check) of whole pre one field (block based). initial = 0
#define MCDI_FIELD_MV                              ((0x2f60  << 2) + 0xff900000)
//Bit 31:24, reg_mcdi_pd22chkcnt
//Bit 23:16, reg_mcdi_fieldgmvcnt
//Bit    15, reg_mcdi_pd22chkflg
//Bit    14, reg_mcdi_fieldgmvlock
//Bit 13: 8, reg_mcdi_fieldrptmv.    	           last field rpt mv
//Bit  7: 6, reserved
//Bit  5: 0, reg_mcdi_fieldgmv.                    last field gmv
#define MCDI_FIELD_HVF_PRDX_CNT                    ((0x2f61  << 2) + 0xff900000)
//Bit 31:24, reg_mcdi_motionparadoxcnt.
//Bit 23:17, reserved
//Bit    16, reg_mcdi_motionparadoxflg.
//Bit 15: 8, reg_mcdi_highvertfrqcnt.
//Bit  7: 4, reserved
//Bit  3: 2, reg_mcdi_highvertfrqphase.
//Bit     1, reserved
//Bit     0, reg_mcdi_highvertfrqflg.
#define MCDI_FIELD_LUMA_AVG_SUM_0                  ((0x2f62  << 2) + 0xff900000)
//Bit 31: 0, reg_mcdi_fld_luma_avg_sum0.
#define MCDI_FIELD_LUMA_AVG_SUM_1                  ((0x2f63  << 2) + 0xff900000)
//Bit 31: 0, reg_mcdi_fld_luma_avg_sum1.
#define MCDI_YCBCR_BLEND_CRTL                      ((0x2f64  << 2) + 0xff900000)
//Bit 31:16, reserved
//Bit 15: 8, reg_mcdi_ycbcrblendgain.              ycbcr blending gain for cbcr in ycbcr. default = 0
//Bit  7: 2, reserved.
//Bit  1: 0, reg_mcdi_ycbcrblendmode.              0:y+cmb(cb,cr), 1:med(r,g,b), 2:max(r,g,b), default = 2
#define MCDI_MCVECWR_CANVAS_SIZE                   ((0x2f65  << 2) + 0xff900000)
#define MCDI_MCVECRD_CANVAS_SIZE                   ((0x2f66  << 2) + 0xff900000)
#define MCDI_MCINFOWR_CANVAS_SIZE                  ((0x2f67  << 2) + 0xff900000)
#define MCDI_MCINFORD_CANVAS_SIZE                  ((0x2f68  << 2) + 0xff900000)
#define MCDI_MCVECWR_X                             ((0x2f92  << 2) + 0xff900000)
#define MCDI_MCVECWR_Y                             ((0x2f93  << 2) + 0xff900000)
#define MCDI_MCVECWR_CTRL                          ((0x2f94  << 2) + 0xff900000)
#define MCDI_MCVECRD_X                             ((0x2f95  << 2) + 0xff900000)
#define MCDI_MCVECRD_Y                             ((0x2f96  << 2) + 0xff900000)
#define MCDI_MCVECRD_CTRL                          ((0x2f97  << 2) + 0xff900000)
#define MCDI_MCINFOWR_X                            ((0x2f98  << 2) + 0xff900000)
#define MCDI_MCINFOWR_Y                            ((0x2f99  << 2) + 0xff900000)
#define MCDI_MCINFOWR_CTRL                         ((0x2f9a  << 2) + 0xff900000)
#define MCDI_MCINFORD_X                            ((0x2f9b  << 2) + 0xff900000)
#define MCDI_MCINFORD_Y                            ((0x2f9c  << 2) + 0xff900000)
#define MCDI_MCINFORD_CTRL                         ((0x2f9d  << 2) + 0xff900000)
// ================================================================== MC registers ========================================================================================================
#define MCDI_MC_CRTL                               ((0x2f70  << 2) + 0xff900000)
//Bit 31: 9, reserved
//Bit     8, reg_mcdi_mcpreflg.                    flag to use previous field for MC, 0:forward field, 1: previous field, default = 1
//Bit     7, reg_mcdi_mcrelrefbycolcfden.          enable rel refinement by column cofidence in mc blending, default = 1
//Bit  6: 5, reg_mcdi_mclpfen.                     enable mc pixles/rel lpf, 0:disable, 1: lpf rel, 2: lpf mc pxls, 3: lpf both rel and mc pxls, default = 0
//Bit  4: 2, reg_mcdi_mcdebugmode.                 enable mc debug mode, 0:disable, 1: split left/right, 2: split top/bottom, 3: debug mv, 4: debug rel, default = 0
//Bit  1: 0, reg_mcdi_mcen.                        mcdi enable mode, 0:disable, 1: blend with ma, 2: full mc, default = 1
#define MCDI_MC_LPF_MSK_0                          ((0x2f71  << 2) + 0xff900000)
//Bit 31:21, reserved
//Bit 20:16, reg_mcdi_mclpfmsk02.                  mc lpf coef. 2 for pixel 0 of current block, normalized 16 as '1', default = 0
//Bit 15:13, reserved
//Bit 12: 8, reg_mcdi_mclpfmsk01.                  mc lpf coef. 1 for pixel 0 of current block, normalized 16 as '1', default = 9
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_mclpfmsk00.                  mc lpf coef. 0 for pixel 0 of current block, normalized 16 as '1', default = 7
#define MCDI_MC_LPF_MSK_1                          ((0x2f72  << 2) + 0xff900000)
//Bit 31:21, reserved
//Bit 20:16, reg_mcdi_mclpfmsk12.                  mc lpf coef. 2 for pixel 1 of current block, 0~16, normalized 16 as '1', default = 0
//Bit 15:13, reserved
//Bit 12: 8, reg_mcdi_mclpfmsk11.                  mc lpf coef. 1 for pixel 1 of current block, 0~16, normalized 16 as '1', default = 11
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_mclpfmsk10.                  mc lpf coef. 0 for pixel 1 of current block, 0~16, normalized 16 as '1', default = 5
#define MCDI_MC_LPF_MSK_2                          ((0x2f73  << 2) + 0xff900000)
//Bit 31:21, reserved
//Bit 20:16, reg_mcdi_mclpfmsk22.                  mc lpf coef. 2 for pixel 2 of current block, 0~16, normalized 16 as '1', default = 1
//Bit 15:13, reserved
//Bit 12: 8, reg_mcdi_mclpfmsk21.                  mc lpf coef. 1 for pixel 2 of current block, 0~16, normalized 16 as '1', default = 14
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_mclpfmsk20.                  mc lpf coef. 0 for pixel 2 of current block, 0~16, normalized 16 as '1', default = 1
#define MCDI_MC_LPF_MSK_3                          ((0x2f74  << 2) + 0xff900000)
//Bit 31:21, reserved
//Bit 20:16, reg_mcdi_mclpfmsk32.                  mc lpf coef. 2 for pixel 3 of current block, 0~16, normalized 16 as '1', default = 5
//Bit 15:13, reserved
//Bit 12: 8, reg_mcdi_mclpfmsk31.                  mc lpf coef. 1 for pixel 3 of current block, 0~16, normalized 16 as '1', default = 11
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_mclpfmsk30.                  mc lpf coef. 0 for pixel 3 of current block, 0~16, normalized 16 as '1', default = 0
#define MCDI_MC_LPF_MSK_4                          ((0x2f75  << 2) + 0xff900000)
//Bit 31:21, reserved
//Bit 20:16, reg_mcdi_mclpfmsk42.                  mc lpf coef. 2 for pixel 4 of current block, 0~16, normalized 16 as '1', default = 7
//Bit 15:13, reserved
//Bit 12: 8, reg_mcdi_mclpfmsk41.                  mc lpf coef. 1 for pixel 4 of current block, 0~16, normalized 16 as '1', default = 9
//Bit  7: 5, reserved
//Bit  4: 0, reg_mcdi_mclpfmsk40.                  mc lpf coef. 0 for pixel 4 of current block, 0~16, normalized 16 as '1', default = 0
#define MCDI_MC_REL_GAIN_OFFST_0                   ((0x2f76  << 2) + 0xff900000)
//Bit 31:26, reserved
//Bit    25, reg_mcdi_mcmotionparadoxflg.          flag of motion paradox, initial with 0 and read from software, default = 0
//Bit    24, reg_mcdi_mchighvertfrqflg.            flag of high vert frq, initial with 0 and read from software, default = 0
//Bit 23:16, reg_mcdi_mcmotionparadoxoffst.        offset (rel + offset) for rel (MC blending coef.) refinement if motion paradox detected before MC blending before MC blending, default = 128
//Bit 15:12, reserved
//Bit 11: 8, reg_mcdi_mcmotionparadoxgain.         gain for rel (MC blending coef.) refinement if motion paradox detected before MC blending, normalized 8 as '1', set 15 to 16, default = 8
//Bit  7: 4, reg_mcdi_mchighvertfrqoffst.          minus offset (alpha - offset) for motion (MA blending coef.) refinement if high vertical frequency detected before MA blending, default = 15
//Bit  3: 0, reg_mcdi_mchighvertfrqgain.           gain for motion (MA blending coef.) refinement if high vertical frequency detected before MA blending, normalized 8 as '1', set 15 to 16, default = 8
#define MCDI_MC_REL_GAIN_OFFST_1                   ((0x2f77  << 2) + 0xff900000)
//Bit 31:24, reg_mcdi_mcoutofboundrayoffst.        offset (rel + offset) for rel (MC blending coef.) refinement if MC pointed out of boundray before MC blending before MC blending, default = 255
//Bit 23:20, reserved
//Bit 19:16, reg_mcdi_mcoutofboundraygain.         gain for rel (MC blending coef.) refinement if MC pointed out of boundray before MC blending, normalized 8 as '1', set 15 to 16, default = 8
//Bit 15: 8, reg_mcdi_mcrelrefbycolcfdoffst.       offset (rel + offset) for rel (MC blending coef.) refinement if motion paradox detected before MC blending before MC blending, default = 255
//Bit  7: 4, reserved.
//Bit  3: 0, reg_mcdi_mcrelrefbycolcfdgain.        gain for rel (MC blending coef.) refinement if column cofidence failed before MC blending, normalized 8 as '1', set 15 to 16, default = 8
#define MCDI_MC_COL_CFD_0                          ((0x2f78  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_0.                    column cofidence value 0 read from software. initial = 0
#define MCDI_MC_COL_CFD_1                          ((0x2f79  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_1.                    column cofidence value 1 read from software. initial = 0
#define MCDI_MC_COL_CFD_2                          ((0x2f7a  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_2.                    column cofidence value 2 read from software. initial = 0
#define MCDI_MC_COL_CFD_3                          ((0x2f7b  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_3.                    column cofidence value 3 read from software. initial = 0
#define MCDI_MC_COL_CFD_4                          ((0x2f7c  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_4.                    column cofidence value 4 read from software. initial = 0
#define MCDI_MC_COL_CFD_5                          ((0x2f7d  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_5.                    column cofidence value 5 read from software. initial = 0
#define MCDI_MC_COL_CFD_6                          ((0x2f7e  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_6.                    column cofidence value 6 read from software. initial = 0
#define MCDI_MC_COL_CFD_7                          ((0x2f7f  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_7.                    column cofidence value 7 read from software. initial = 0
#define MCDI_MC_COL_CFD_8                          ((0x2f80  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_8.                    column cofidence value 8 read from software. initial = 0
#define MCDI_MC_COL_CFD_9                          ((0x2f81  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_9.                    column cofidence value 9 read from software. initial = 0
#define MCDI_MC_COL_CFD_10                         ((0x2f82  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_10.                   column cofidence value 10 read from software. initial = 0
#define MCDI_MC_COL_CFD_11                         ((0x2f83  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_11.                   column cofidence value 11 read from software. initial = 0
#define MCDI_MC_COL_CFD_12                         ((0x2f84  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_12.                   column cofidence value 12 read from software. initial = 0
#define MCDI_MC_COL_CFD_13                         ((0x2f85  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_13.                   column cofidence value 13 read from software. initial = 0
#define MCDI_MC_COL_CFD_14                         ((0x2f86  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_14.                   column cofidence value 14 read from software. initial = 0
#define MCDI_MC_COL_CFD_15                         ((0x2f87  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_15.                   column cofidence value 15 read from software. initial = 0
#define MCDI_MC_COL_CFD_16                         ((0x2f88  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_16.                   column cofidence value 16 read from software. initial = 0
#define MCDI_MC_COL_CFD_17                         ((0x2f89  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_17.                   column cofidence value 17 read from software. initial = 0
#define MCDI_MC_COL_CFD_18                         ((0x2f8a  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_18.                   column cofidence value 18 read from software. initial = 0
#define MCDI_MC_COL_CFD_19                         ((0x2f8b  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_19.                   column cofidence value 19 read from software. initial = 0
#define MCDI_MC_COL_CFD_20                         ((0x2f8c  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_20.                   column cofidence value 20 read from software. initial = 0
#define MCDI_MC_COL_CFD_21                         ((0x2f8d  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_21.                   column cofidence value 21 read from software. initial = 0
#define MCDI_MC_COL_CFD_22                         ((0x2f8e  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_22.                   column cofidence value 22 read from software. initial = 0
#define MCDI_MC_COL_CFD_23                         ((0x2f8f  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_23.                   column cofidence value 23 read from software. initial = 0
#define MCDI_MC_COL_CFD_24                         ((0x2f90  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_24.                   column cofidence value 24 read from software. initial = 0
#define MCDI_MC_COL_CFD_25                         ((0x2f91  << 2) + 0xff900000)
//Bit 31: 0, mcdi_mc_col_cfd_25.                   column cofidence value 25 read from software. initial = 0
// ===================================================================================== PRE RO Registers ==========================================================================================
#define MCDI_RO_FLD_LUMA_AVG_SUM                   ((0x2fa0  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_fldlumaavgsum.                block's luma avg sum of current filed (block based). initial = 0
#define MCDI_RO_GMV_VLD_CNT                        ((0x2fa1  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_gmvvldcnt.                    valid gmv's count of pre one filed (block based). initial = 0
#define MCDI_RO_RPT_FLG_CNT                        ((0x2fa2  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_rptflgcnt.                    repeat mv's count of pre one filed (block based). initial = 0
#define MCDI_RO_FLD_BAD_SAD_CNT                    ((0x2fa3  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_fldbadsadcnt.                 bad sad count of whole pre one field (block based). initial = 0
#define MCDI_RO_FLD_BAD_BADW_CNT                   ((0x2fa4  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_fldbadbadwcnt.                bad badw count of whole pre one field (block based). initial = 0
#define MCDI_RO_FLD_BAD_REL_CNT                    ((0x2fa5  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_fldbadrelcnt.                 bad rel count of whole pre one field (block based). initial = 0
#define MCDI_RO_FLD_MTN_CNT                        ((0x2fa6  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_fldmtncnt.                    motion count of whole pre one field (pixel based). initial = 0
#define MCDI_RO_FLD_VLD_CNT                        ((0x2fa7  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_fldvldcnt.                    valid motion count of whole pre one field (pixel based). initial = 0
#define MCDI_RO_FLD_PD_22_PRE_CNT                  ((0x2fa8  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_fldpd22precnt.                prevoius pd22 check count of whole pre one field (block based). initial = 0
#define MCDI_RO_FLD_PD_22_FOR_CNT                  ((0x2fa9  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_fldpd22forcnt.                forward pd22 check count of whole pre one field (block based). initial = 0
#define MCDI_RO_FLD_PD_22_FLT_CNT                  ((0x2faa  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_fldpd22fltcnt.                flat count (for pd22 check) of whole pre one field (block based). initial = 0
#define MCDI_RO_HIGH_VERT_FRQ_FLG                  ((0x2fab  << 2) + 0xff900000)
//Bit 31:16, reserved.
//Bit 15: 8, ro_mcdi_highvertfrqcnt.               high vertical frequency count till prevoius one field. initial = 0
//Bit  7: 3, reserved.
//Bit  2: 1, ro_mcdi_highvertfrqphase.             high vertical frequency phase of prevoius one field. initial = 2
//Bit     0, ro_mcdi_highvertfrqflg.               high vertical frequency flag of prevoius one field. initial = 0
#define MCDI_RO_GMV_LOCK_FLG                       ((0x2fac  << 2) + 0xff900000)
//Bit 31:16, reserved.
//Bit 15: 8, ro_mcdi_gmvlckcnt.                    global mv lock count till prevoius one field. initial = 0
//Bit  7: 2, ro_mcdi_gmv.                          global mv of prevoius one field. -31~31, initial = 32 (invalid value)
//Bit     1, ro_mcdi_zerogmvlckflg.                zero global mv lock flag of prevoius one field. initial = 0
//Bit     0, ro_mcdi_gmvlckflg.                    global mv lock flag of prevoius one field. initial = 0
#define MCDI_RO_RPT_MV                             ((0x2fad  << 2) + 0xff900000)
//Bit 5: 0, ro_mcdi_rptmv.                         repeate mv of prevoius one field. -31~31, initial = 32 (invalid value)
#define MCDI_RO_MOTION_PARADOX_FLG                 ((0x2fae  << 2) + 0xff900000)
//Bit 31:16, reserved.
//Bit 15: 8, ro_mcdi_motionparadoxcnt.             motion paradox count till prevoius one field. initial = 0
//Bit  7: 1, reserved.
//Bit     0, ro_mcdi_motionparadoxflg.             motion paradox flag of prevoius one field. initial = 0
#define MCDI_RO_PD_22_FLG                          ((0x2faf  << 2) + 0xff900000)
//Bit 31:27, reserved.
//Bit    26, ro_mcdi_pd22flg2.                     pull down 22 flag of prevoius one field. initial = 0
//Bit    25, ro_mcdi_pd22flg1.                     pull down 22 flag of prevoius one field. initial = 0
//Bit    24, ro_mcdi_pd22flg.                      pull down 22 flag of prevoius one field. initial = 0
//Bit 23:16, ro_mcdi_pd22cnt2.                     pull down 22 count till prevoius one field. initial = 0
//Bit 15: 8, ro_mcdi_pd22cnt1.                     pull down 22 count till prevoius one field. initial = 0
//Bit  7: 0, ro_mcdi_pd22cnt.                      pull down 22 count till prevoius one field. initial = 0
#define MCDI_RO_COL_CFD_0                          ((0x2fb0  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_0.                    column cofidence value 0. initial = 0
#define MCDI_RO_COL_CFD_1                          ((0x2fb1  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_1.                    column cofidence value 1. initial = 0
#define MCDI_RO_COL_CFD_2                          ((0x2fb2  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_2.                    column cofidence value 2. initial = 0
#define MCDI_RO_COL_CFD_3                          ((0x2fb3  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_3.                    column cofidence value 3. initial = 0
#define MCDI_RO_COL_CFD_4                          ((0x2fb4  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_4.                    column cofidence value 4. initial = 0
#define MCDI_RO_COL_CFD_5                          ((0x2fb5  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_5.                    column cofidence value 5. initial = 0
#define MCDI_RO_COL_CFD_6                          ((0x2fb6  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_6.                    column cofidence value 6. initial = 0
#define MCDI_RO_COL_CFD_7                          ((0x2fb7  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_7.                    column cofidence value 7. initial = 0
#define MCDI_RO_COL_CFD_8                          ((0x2fb8  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_8.                    column cofidence value 8. initial = 0
#define MCDI_RO_COL_CFD_9                          ((0x2fb9  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_9.                    column cofidence value 9. initial = 0
#define MCDI_RO_COL_CFD_10                         ((0x2fba  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_10.                   column cofidence value 10. initial = 0
#define MCDI_RO_COL_CFD_11                         ((0x2fbb  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_11.                   column cofidence value 11. initial = 0
#define MCDI_RO_COL_CFD_12                         ((0x2fbc  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_12.                   column cofidence value 12. initial = 0
#define MCDI_RO_COL_CFD_13                         ((0x2fbd  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_13.                   column cofidence value 13. initial = 0
#define MCDI_RO_COL_CFD_14                         ((0x2fbe  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_14.                   column cofidence value 14. initial = 0
#define MCDI_RO_COL_CFD_15                         ((0x2fbf  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_15.                   column cofidence value 15. initial = 0
#define MCDI_RO_COL_CFD_16                         ((0x2fc0  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_16.                   column cofidence value 16. initial = 0
#define MCDI_RO_COL_CFD_17                         ((0x2fc1  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_17.                   column cofidence value 17. initial = 0
#define MCDI_RO_COL_CFD_18                         ((0x2fc2  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_18.                   column cofidence value 18. initial = 0
#define MCDI_RO_COL_CFD_19                         ((0x2fc3  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_19.                   column cofidence value 19. initial = 0
#define MCDI_RO_COL_CFD_20                         ((0x2fc4  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_20.                   column cofidence value 20. initial = 0
#define MCDI_RO_COL_CFD_21                         ((0x2fc5  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_21.                   column cofidence value 21. initial = 0
#define MCDI_RO_COL_CFD_22                         ((0x2fc6  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_22.                   column cofidence value 22. initial = 0
#define MCDI_RO_COL_CFD_23                         ((0x2fc7  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_23.                   column cofidence value 23. initial = 0
#define MCDI_RO_COL_CFD_24                         ((0x2fc8  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_24.                   column cofidence value 24. initial = 0
#define MCDI_RO_COL_CFD_25                         ((0x2fc9  << 2) + 0xff900000)
//Bit 31: 0, ro_mcdi_col_cfd_25.                   column cofidence value 25. initial = 0
// add space 8'hd0-8'hef
//
// Reading file:  dipd_regs.h
//
// synopsys translate_off
// synopsys translate_on
// using 8'he0-8'hef
#define DIPD_COMB_CTRL0                            ((0x2fd0  << 2) + 0xff900000)
//Bit 31:0,								reg_pd_comb_ctrl0
#define DIPD_COMB_CTRL1                            ((0x2fd1  << 2) + 0xff900000)
//Bit 31:0,								reg_pd_comb_ctrl1
#define DIPD_COMB_CTRL2                            ((0x2fd2  << 2) + 0xff900000)
//Bit 31:0,								reg_pd_comb_ctrl2
#define DIPD_COMB_CTRL3                            ((0x2fd3  << 2) + 0xff900000)
//Bit 31:0,								reg_pd_comb_ctrl3
#define DIPD_COMB_CTRL4                            ((0x2fd4  << 2) + 0xff900000)
//Bit 31:0,								reg_pd_comb_ctrl4
#define DIPD_COMB_CTRL5                            ((0x2fd5  << 2) + 0xff900000)
//Bit 31:0,								reg_pd_comb_ctrl5
#define DIPD_RO_COMB_0                             ((0x2fd6  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_0
#define DIPD_RO_COMB_1                             ((0x2fd7  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_1
#define DIPD_RO_COMB_2                             ((0x2fd8  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_2
#define DIPD_RO_COMB_3                             ((0x2fd9  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_3
#define DIPD_RO_COMB_4                             ((0x2fda  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_4
#define DIPD_RO_COMB_5                             ((0x2fdb  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_5
#define DIPD_RO_COMB_6                             ((0x2fdc  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_6
#define DIPD_RO_COMB_7                             ((0x2fdd  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_7
#define DIPD_RO_COMB_8                             ((0x2fde  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_8
#define DIPD_RO_COMB_9                             ((0x2fdf  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_9
#define DIPD_RO_COMB_10                            ((0x2fe0  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_10
#define DIPD_RO_COMB_11                            ((0x2fe1  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_11
#define DIPD_RO_COMB_12                            ((0x2fe2  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_12
#define DIPD_RO_COMB_13                            ((0x2fe3  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_13
#define DIPD_RO_COMB_14                            ((0x2fe4  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_14
#define DIPD_RO_COMB_15                            ((0x2fe5  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_15
#define DIPD_RO_COMB_16                            ((0x2fe6  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_16
#define DIPD_RO_COMB_17                            ((0x2fe7  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_17
#define DIPD_RO_COMB_18                            ((0x2fe8  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_18
#define DIPD_RO_COMB_19                            ((0x2fe9  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_19
#define DIPD_RO_COMB_20                            ((0x2fea  << 2) + 0xff900000)
//Bit 31:0,								ro_pd_comb_20
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  dipd_regs.h
//
// addr space 8'hf0-8'hff
//
// Reading file:  nr3_tnr_regs.h
//
// synopsys translate_off
// synopsys translate_on
#define NR3_MODE                                   ((0x2ff0  << 2) + 0xff900000)
//Bit 31: 6        reserved
//Bit  5           reg_nr3_vtxt_mode         // unsigned , default = 0  0: avg; 1:MAX
//Bit  4           reg_3dnr_nr3_cbyy_ignor_coop    // unsigned , default = 0  ignore coop condition for cbyy motion decision
//Bit  3           reg_3dnr_nr3_ybyc_ignor_cnoop   // unsigned , default = 0  ignore cnoop condition for ybyc motion decision
//Bit  2: 0        reg_3dnr_nr3_suremot_txt_mode   // unsigned , default = 3  0: cur, 1:p2; 2: (cur+p2)/2; 3/up: min(cur,p2)
#define NR3_COOP_PARA                              ((0x2ff1  << 2) + 0xff900000)
//Bit 31:22        reserved
//Bit 21:20        reg_3dnr_nr3_coop_mode    // unsigned , default = 2  0 original pixel 1: [1 2 1]/4 lpf; 2: [1 2 2 2 1]/8; 3: 3x3 lpf
//Bit 19:16        reg_3dnr_nr3_coop_ratio    // unsigned , default = 8  cur and p2 color oop decision ratio:  (avg1<(dif1*ratio/8 + ofst));
//Bit 15: 8        reg_3dnr_nr3_coop_ofset    // signed , default = -1  cur and p2 color oop decision ofst:  (avg1<(dif1*ratio/8 + ofst));
//Bit  7: 0        reg_3dnr_nr3_coop_sat_thrd // unsigned , default = 0  cur and p2 color oop decision min(sat0,sat1) threshold;
#define NR3_CNOOP_GAIN                             ((0x2ff2  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:20        reg_3dnr_nr3_cnoop_ratio0   // unsigned , default = 8  cur and p2 color noop decision ratio0:  (avg1<(MAX(sat0,sat2)*ratio0/8 + ofst0));
//Bit 19:16        reg_3dnr_nr3_cnoop_ratio1   // unsigned , default = 8  cur and p2 color noop decision ratio1:  (dif1<(MIN(sat0,sat2)*ratio1/8 + ofst1));
//Bit 15: 8        reg_3dnr_nr3_cnoop_ofset0   // signed , default = 25  cur and p2 color noop decision ofset0:  (avg1<(MAX(sat0,sat2)*ratio0/8 + ofst0));
//Bit  7: 0        reg_3dnr_nr3_cnoop_ofset1   // signed , default = 0  cur and p2 color noop decision ofset1:  (dif1<(MIN(sat0,sat2)*ratio1/8 + ofst1));
#define NR3_YMOT_PARA                              ((0x2ff3  << 2) + 0xff900000)
//Bit 31:20        reserved
//Bit 19           reg_3dnr_nr3_ymot_only_en  // unsigned , default = 1  enable signal for ignor chroma motion: (ytxt &coop)
//Bit 18           reg_3dnr_nr3_ymot_only_cmtmode  // unsigned , default = 1  0: cmot=ymot; 1: cmot = MIN(ymot, cmot)
//Bit 17:16        reg_3dnr_nr3_ymot_only_txtmode  // unsigned , default = 0  0, min(txt0,txt2); 1, max(txt0,txt2);2, (txt0+txt2)/2; 3: sat(txt0, txt2)
//Bit 15: 8        reg_3dnr_nr3_ymot_only_txtthrd  // unsigned , default = 10  threshold to luma texture to decide use ymot only
//Bit  7: 0        reg_3dnr_nr3_ymot_only_motthrd  // unsigned , default = 30  threshold to luma motion to decide use ymot only
#define NR3_CMOT_PARA                              ((0x2ff4  << 2) + 0xff900000)
//Bit 31:20        reserved
//Bit 19           reg_3dnr_nr3_cmot_only_en  // unsigned , default = 1  enable signal for ignor luma motion: (ctxt &cnoop)
//Bit 18           reg_3dnr_nr3_cmot_only_ymtmode  // unsigned , default = 0  0: ymot=cmot+ymot/4; 1: ymot = MIN(ymot, cmot)
//Bit 17:16        reg_3dnr_nr3_cmot_only_txtmode  // unsigned , default = 0  0, min(txt0,txt2); 1, max(txt0,txt2);2, (txt0+txt2)/2; 3: sat(txt0, txt2)
//Bit 15: 8        reg_3dnr_nr3_cmot_only_txtthrd  // unsigned , default = 20  threshold to chroma texture to decide use cmot only
//Bit  7: 0        reg_3dnr_nr3_cmot_only_motthrd  // unsigned , default = 15  threshold to chroma motion to decide use cmot only
#define NR3_SUREMOT_YGAIN                          ((0x2ff5  << 2) + 0xff900000)
//Bit 31:24        reg_3dnr_nr3_suremot_dec_yrate  // unsigned , default = 16  (norm 16)lpfMot>(dec_rate*txt +ofst) then force lpfMot*frc_gain+frc_ofset
//Bit 23:16        reg_3dnr_nr3_suremot_dec_yofst  // unsigned , default = 12   lpfMot>(dec_rate*txt +ofst) then force lpfMot*frc_gain+frc_ofset
//Bit 15: 8        reg_3dnr_nr3_suremot_frc_ygain  // unsigned , default = 64  (norm 8)lpfMot>(dec_rate*txt +ofst) then force lpfMot*frc_gain+frc_ofset
//Bit  7: 0        reg_3dnr_nr3_suremot_frc_yofst  // unsigned , default = 20  lpfMot>(dec_rate*txt +ofst) then force lpfMot*frc_gain+frc_ofset
#define NR3_SUREMOT_CGAIN                          ((0x2ff6  << 2) + 0xff900000)
//Bit 31:24        reg_3dnr_nr3_suremot_dec_crate  // unsigned , default = 34  (norm 16)lpfMot>(dec_rate*txt +ofst) then force lpfMot*frc_gain+frc_ofset
//Bit 23:16        reg_3dnr_nr3_suremot_dec_cofst  // unsigned , default = 38   lpfMot>(dec_rate*txt +ofst) then force lpfMot*frc_gain+frc_ofset
//Bit 15: 8        reg_3dnr_nr3_suremot_frc_cgain  // unsigned , default = 64  (norm 8)lpfMot>(dec_rate*txt +ofst) then force lpfMot*frc_gain+frc_ofset
//Bit  7: 0        reg_3dnr_nr3_suremot_frc_cofst  // unsigned , default = 20  lpfMot>(dec_rate*txt +ofst) then force lpfMot*frc_gain+frc_ofset
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  nr3_tnr_regs.h
//
#define LBUF_TOP_CTRL                              ((0x2fff  << 2) + 0xff900000)
//bit 23:22   mode_444c422
//bit 21:20   mode_422c444
//bit 17      lbuf_fmt444_mode
//bit 16      lbuf_line5_mode
//bit 12:0    pre_lbuf_size
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  mcdi_regs.h
//
//  VPU_VLOCK register    (16'h3000 - 16'h30ff)
//========================================================================
//`define VPU_VLOCK_VCBUS_BASE                   8'h30
//
// Reading file:  vpu_vlock_reg.h
//
// synopsys translate_off
// synopsys translate_on
// ----------------------------
// VPU_VLOCK 0x30
// ----------------------------
// -----------------------------------------------
// CBUS_BASE:  VPU_VLOCK_VCBUS_BASE = 0x30
// -----------------------------------------------
#define VPU_VLOCK_CTRL                             ((0x3000  << 2) + 0xff900000)
#define VPU_VLOCK_MISC_CTRL                        ((0x3001  << 2) + 0xff900000)
#define VPU_VLOCK_LOOP0_ACCUM_LMT                  ((0x3002  << 2) + 0xff900000)
#define VPU_VLOCK_LOOP0_CTRL0                      ((0x3003  << 2) + 0xff900000)
#define VPU_VLOCK_LOOP1_CTRL0                      ((0x3004  << 2) + 0xff900000)
#define VPU_VLOCK_LOOP1_IMISSYNC_MAX               ((0x3005  << 2) + 0xff900000)
#define VPU_VLOCK_LOOP1_IMISSYNC_MIN               ((0x3006  << 2) + 0xff900000)
#define VPU_VLOCK_OVWRITE_ACCUM0                   ((0x3007  << 2) + 0xff900000)
#define VPU_VLOCK_OVWRITE_ACCUM1                   ((0x3008  << 2) + 0xff900000)
#define VPU_VLOCK_OUTPUT0_CAPT_LMT                 ((0x3009  << 2) + 0xff900000)
#define VPU_VLOCK_OUTPUT0_PLL_LMT                  ((0x300a  << 2) + 0xff900000)
#define VPU_VLOCK_OUTPUT1_CAPT_LMT                 ((0x300b  << 2) + 0xff900000)
#define VPU_VLOCK_OUTPUT1_PLL_LMT                  ((0x300c  << 2) + 0xff900000)
#define VPU_VLOCK_LOOP1_PHSDIF_TGT                 ((0x300d  << 2) + 0xff900000)
#define VPU_VLOCK_RO_LOOP0_ACCUM                   ((0x300e  << 2) + 0xff900000)
#define VPU_VLOCK_RO_LOOP1_ACCUM                   ((0x300f  << 2) + 0xff900000)
#define VPU_VLOCK_OROW_OCOL_MAX                    ((0x3010  << 2) + 0xff900000)
#define VPU_VLOCK_RO_VS_I_DIST                     ((0x3011  << 2) + 0xff900000)
#define VPU_VLOCK_RO_VS_O_DIST                     ((0x3012  << 2) + 0xff900000)
#define VPU_VLOCK_RO_LINE_PIX_ADJ                  ((0x3013  << 2) + 0xff900000)
#define VPU_VLOCK_RO_OUTPUT_00_01                  ((0x3014  << 2) + 0xff900000)
#define VPU_VLOCK_RO_OUTPUT_10_11                  ((0x3015  << 2) + 0xff900000)
#define VPU_VLOCK_MX4096                           ((0x3016  << 2) + 0xff900000)
#define VPU_VLOCK_STBDET_WIN0_WIN1                 ((0x3017  << 2) + 0xff900000)
#define VPU_VLOCK_STBDET_CLP                       ((0x3018  << 2) + 0xff900000)
#define VPU_VLOCK_STBDET_ABS_WIN0                  ((0x3019  << 2) + 0xff900000)
#define VPU_VLOCK_STBDET_ABS_WIN1                  ((0x301a  << 2) + 0xff900000)
#define VPU_VLOCK_STBDET_SGN_WIN0                  ((0x301b  << 2) + 0xff900000)
#define VPU_VLOCK_STBDET_SGN_WIN1                  ((0x301c  << 2) + 0xff900000)
#define VPU_VLOCK_ADJ_EN_SYNC_CTRL                 ((0x301d  << 2) + 0xff900000)
#define VPU_VLOCK_GCLK_EN                          ((0x301e  << 2) + 0xff900000)
#define VPU_VLOCK_LOOP1_ACCUM_LMT                  ((0x301f  << 2) + 0xff900000)
#define VPU_VLOCK_RO_M_INT_FRAC                    ((0x3020  << 2) + 0xff900000)
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  vpu_vlock_reg.h
//
//`define VPPB_VCBUS_BASE                8'h31
//
// Reading file:  srscl_reg.h
//
// synopsys translate_off
// synopsys translate_on
// -----------------------------------------------
// CBUS_BASE:  VPPB_VCBUS_BASE = 0x31
// -----------------------------------------------
////=================================================================////
//// vkeystone
////=================================================================////
// 8'h00-8'h17
//
// Reading file:  vkstone_regs.h
//
// synopsys translate_off
// synopsys translate_on
#define VKS_CTRL                                   ((0x3100  << 2) + 0xff900000)
//Bit 31           reg_vks_en                // unsigned , default = 1  enable signal of the vks function
//Bit 30           reg_vks_scl_mode0         // unsigned , default = 1  : b0 mode of vks ofset mode, 0: offset= offset; 1: offset= offset*step= ofset/scale;
//Bit 29           reg_vks_scl_mode1         // unsigned , default = 1  : b0 mode of vks ofset mode, 0: offset= offset; 1: offset= offset*step= ofset/scale;
//Bit 28           reg_vks_fill_mode         // unsigned , default = 1  mode of out-of-boundary fill, 0 extension, 1: fill with the fill_value
//Bit 27:26        reg_vks_row_inp_mode      // unsigned , default = 1  , interpolation mode from 16pieces ofset/step to each line ofset and step; 0: linear interpolation; 1: cubic interpolation (using ccoef)
//Bit 25           reg_vks_border_ext_mode0  // unsigned , default = 0  , extend mode of the border data of luma and chroma, 0: copy the most border one; 1: extropolate the border one
//Bit 24           reg_vks_border_ext_mode1  // unsigned , default = 0  , extend mode of the border data of luma and chroma, 0: copy the most border one; 1: extropolate the border one
//Bit 23           reg_vks_obuf_mode0        // unsigned , default = 1  , mode of output buffer left/right side. 0: no precalculate active pixels during output fill region; 1: precaclc active pixels during output fill regions
//Bit 22           reg_vks_obuf_mode1        // unsigned , default = 1  , mode of output buffer left/right side. 0: no precalculate active pixels during output fill region; 1: precaclc active pixels during output fill regions
//Bit 21:20        reg_vks_obuf_mrgn0        // unsigned , default = 3  , margin pixels for left right most active pixel to the fill pixels to avoid jump
//Bit 19:18        reg_vks_obuf_mrgn1        // unsigned , default = 3  , margin pixels for left right most active pixel to the fill pixels to avoid jump
//Bit 17:16        reg_vks_phs_qmode         // unsigned , default = 2  , interpolation mode of the phase, 0: floor to 1/64 phase; 1: round to 1/64 phase; 2/3 linear intp
//Bit 15: 0        reg_vks_row_scl           // unsigned , default = 11651  , scale of row to make it fit to the 16 pieces, scl = (2^23)/RowMax
#define VKS_OUT_WIN_SIZE                           ((0x3101  << 2) + 0xff900000)
//Bit 31:30        reserved
//Bit 29:16        reg_vks_ocolmax           // unsigned , default = 1280  output outer window col number, decided by the projector
//Bit 15:14        reserved
//Bit 13: 0        reg_vks_orowmax           // unsigned , default = 720  output outer window row number, decided by the projector
#define VKS_PRELPF_YCOEF0                          ((0x3102  << 2) + 0xff900000)
//Bit 31:24        reg_vks_prelpf_ycoef0     // signed , default = -128  coef of horizontal luma prelpf for Keystone, normalized 128 as '1'
//Bit 23:16        reg_vks_prelpf_ycoef1     // signed , default = 0  coef of horizontal luma prelpf for Keystone, normalized 128 as '1'
//Bit 15: 8        reg_vks_prelpf_ycoef2     // signed , default = 0  coef of horizontal luma prelpf for Keystone, normalized 128 as '1'
//Bit  7: 0        reg_vks_prelpf_ycoef3     // signed , default = 0  coef of horizontal luma prelpf for Keystone, normalized 128 as '1'
#define VKS_PRELPF_YCOEF1                          ((0x3103  << 2) + 0xff900000)
//Bit 31:16        reserved
//Bit 15: 8        reg_vks_prelpf_ycoef4     // signed , default = 0  coef of horizontal luma prelpf for Keystone, normalized 128 as '1'
//Bit  7: 0        reg_vks_prelpf_ycoef5     // signed , default = 0  coef of horizontal luma prelpf for Keystone, normalized 128 as '1'
#define VKS_PRELPF_CCOEF0                          ((0x3104  << 2) + 0xff900000)
//Bit 31:24        reg_vks_prelpf_ccoef0     // signed , default = -128  mode of horizontal chroma prelpf for Keystone, normalized 128 as '1'
//Bit 23:16        reg_vks_prelpf_ccoef1     // signed , default = 0  mode of horizontal chroma prelpf for Keystone, normalized 128 as '1'
//Bit 15: 8        reg_vks_prelpf_ccoef2     // signed , default = 0  mode of horizontal chroma prelpf for Keystone, normalized 128 as '1'
//Bit  7: 0        reg_vks_prelpf_ccoef3     // signed , default = 0  mode of horizontal chroma prelpf for Keystone, normalized 128 as '1'
#define VKS_PRELPF_CCOEF1                          ((0x3105  << 2) + 0xff900000)
//Bit 31:16        reserved
//Bit 15: 8        reg_vks_prelpf_ccoef4     // signed , default = 0  mode of horizontal chroma prelpf for Keystone, normalized 128 as '1'
//Bit  7: 0        reg_vks_prelpf_ccoef5     // signed , default = 0  mode of horizontal chroma prelpf for Keystone, normalized 128 as '1'
#define VKS_FILL_VAL                               ((0x3106  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:16        reg_vks_fill_value0       // unsigned , default = 0  , border fill color define. yuv: [0 128 128];   rgb:[0 0 0]
//Bit 15: 8        reg_vks_fill_value1       // unsigned , default = 128  , border fill color define. yuv: [0 128 128];   rgb:[0 0 0]
//Bit  7: 0        reg_vks_fill_value2       // unsigned , default = 128  , border fill color define. yuv: [0 128 128];   rgb:[0 0 0]
#define VKS_IWIN_HSIZE                             ((0x3107  << 2) + 0xff900000)
//Bit 31:30        reserved
//Bit 29:16        reg_vks_iwinx0            // unsigned , default = 160  , input start-col and end-col;
//Bit 15:14        reserved
//Bit 13: 0        reg_vks_iwinx1            // unsigned , default = 1279  , input start-col and end-col;
#define VKS_IWIN_VSIZE                             ((0x3108  << 2) + 0xff900000)
//Bit 31:30        reserved
//Bit 29:16        reg_vks_iwiny0            // unsigned , default = 0  , input start-row and end-row;
//Bit 15:14        reserved
//Bit 13: 0        reg_vks_iwiny1            // unsigned , default = 719  , input start-row and end-row;
#define VKS_TOP_MISC                               ((0x3109  << 2) + 0xff900000)
//Bit 31:19        reserved
//Bit 18           reg_flt_en                // unsigned , default = 1
//Bit 17           reg_frm_rst               // unsigned , default = 0
//Bit 16           reg_ctrl_sync             // unsigned , default = 0
//Bit 15: 8        blank_num                 // unsigned , default = 4
//Bit  7: 0        flt_blank_num             // unsigned , default = 9
#define VKS_START_CTRL                             ((0x310a  << 2) + 0xff900000)
//Bit 31:17        reserved
//Bit 16           reg_vks_en_mode           // unsigned , default = 0
//Bit 15: 0        reg_hold_phnum            // unsigned , default = 5
#define VKS_LBUF_SIZE                              ((0x310b  << 2) + 0xff900000)
//Bit 31:12        reserved
//Bit 11: 0        reg_lbuf_depth            // unsigned , default = 1024
#define VKS_PARA_ADDR_PORT                         ((0x310e  << 2) + 0xff900000)
#define VKS_PARA_DATA_PORT                         ((0x310f  << 2) + 0xff900000)

    #define VKS_SCL_OFSET00                        0x9  //
//Bit 31:20        reserved
//Bit 19: 0        reg_vks_scl_ofset0        // unsigned , default = 118534  , left offset of the input pixel offset from left, 12.8 12bits pixel + 8bits float phase
    #define VKS_SCL_OFSET01                        0xa  //
//Bit 31:20        reserved
//Bit 19: 0        reg_vks_scl_ofset1        // unsigned , default = 111450  , left offset of the input pixel offset from left, 12.8 12bits pixel + 8bits float phase
    #define VKS_SCL_OFSET02                        0xb  //
//Bit 31:20        reserved
//Bit 19: 0        reg_vks_scl_ofset2        // unsigned , default = 104366  , left offset of the input pixel offset from left, 12.8 12bits pixel + 8bits float phase
    #define VKS_SCL_OFSET03                        0xc  //
//Bit 31:20        reserved
//Bit 19: 0        reg_vks_scl_ofset3        // unsigned , default = 97283  , left offset of the input pixel offset from left, 12.8 12bits pixel + 8bits float phase
    #define VKS_SCL_OFSET04                        0xd  //
//Bit 31:20        reserved
//Bit 19: 0        reg_vks_scl_ofset4        // unsigned , default = 90199  , left offset of the input pixel offset from left, 12.8 12bits pixel + 8bits float phase
    #define VKS_SCL_OFSET05                        0xe  //
//Bit 31:20        reserved
//Bit 19: 0        reg_vks_scl_ofset5        // unsigned , default = 83115  , left offset of the input pixel offset from left, 12.8 12bits pixel + 8bits float phase
    #define VKS_SCL_OFSET06                        0xf  //
//Bit 31:20        reserved
//Bit 19: 0        reg_vks_scl_ofset6        // unsigned , default = 76031  , left offset of the input pixel offset from left, 12.8 12bits pixel + 8bits float phase
    #define VKS_SCL_OFSET07                       0x10  //
//Bit 31:20        reserved
//Bit 19: 0        reg_vks_scl_ofset7        // unsigned , default = 68947  , left offset of the input pixel offset from left, 12.8 12bits pixel + 8bits float phase
    #define VKS_SCL_OFSET08                       0x11  //
//Bit 31:20        reserved
//Bit 19: 0        reg_vks_scl_ofset8        // unsigned , default = 61864  , left offset of the input pixel offset from left, 12.8 12bits pixel + 8bits float phase
    #define VKS_SCL_OFSET09                       0x12  //
//Bit 31:20        reserved
//Bit 19: 0        reg_vks_scl_ofset9        // unsigned , default = 54780  , left offset of the input pixel offset from left, 12.8 12bits pixel + 8bits float phase
    #define VKS_SCL_OFSET10                       0x13  //
//Bit 31:20        reserved
//Bit 19: 0        reg_vks_scl_ofset10       // unsigned , default = 47696  , left offset of the input pixel offset from left, 12.8 12bits pixel + 8bits float phase
    #define VKS_SCL_OFSET11                       0x14  //
//Bit 31:20        reserved
//Bit 19: 0        reg_vks_scl_ofset11       // unsigned , default = 40612  , left offset of the input pixel offset from left, 12.8 12bits pixel + 8bits float phase
    #define VKS_SCL_OFSET12                       0x15  //
//Bit 31:20        reserved
//Bit 19: 0        reg_vks_scl_ofset12       // unsigned , default = 33528  , left offset of the input pixel offset from left, 12.8 12bits pixel + 8bits float phase
    #define VKS_SCL_OFSET13                       0x16  //
//Bit 31:20        reserved
//Bit 19: 0        reg_vks_scl_ofset13       // unsigned , default = 26444  , left offset of the input pixel offset from left, 12.8 12bits pixel + 8bits float phase
    #define VKS_SCL_OFSET14                       0x17  //
//Bit 31:20        reserved
//Bit 19: 0        reg_vks_scl_ofset14       // unsigned , default = 19361  , left offset of the input pixel offset from left, 12.8 12bits pixel + 8bits float phase
    #define VKS_SCL_OFSET15                       0x18  //
//Bit 31:20        reserved
//Bit 19: 0        reg_vks_scl_ofset15       // unsigned , default = 12277  , left offset of the input pixel offset from left, 12.8 12bits pixel + 8bits float phase
    #define VKS_SCL_OFSET16                       0x19  //
//Bit 31:20        reserved
//Bit 19: 0        reg_vks_scl_ofset16       // unsigned , default = 5193  , left offset of the input pixel offset from left, 12.8 12bits pixel + 8bits float phase
    #define VKS_SCL_STEP00                        0x1a  //
//Bit 31:24        reserved
//Bit 23: 0        reg_vks_scl_step0         // unsigned , default = 331378  , for ratio of each line (defined piece),step: 4.20 opixnum = (ipixnum<<20)/step;  scale:4.20 = 1/step
    #define VKS_SCL_STEP01                        0x1b  //
//Bit 31:24        reserved
//Bit 23: 0        reg_vks_scl_step1         // unsigned , default = 383191  , for ratio of each line (defined piece),step: 4.20 opixnum = (ipixnum<<20)/step;  scale:4.20 = 1/step
    #define VKS_SCL_STEP02                        0x1c  //
//Bit 31:24        reserved
//Bit 23: 0        reg_vks_scl_step2         // unsigned , default = 435004  , for ratio of each line (defined piece),step: 4.20 opixnum = (ipixnum<<20)/step;  scale:4.20 = 1/step
    #define VKS_SCL_STEP03                        0x1d  //
//Bit 31:24        reserved
//Bit 23: 0        reg_vks_scl_step3         // unsigned , default = 486818  , for ratio of each line (defined piece),step: 4.20 opixnum = (ipixnum<<20)/step;  scale:4.20 = 1/step
    #define VKS_SCL_STEP04                        0x1e  //
//Bit 31:24        reserved
//Bit 23: 0        reg_vks_scl_step4         // unsigned , default = 538631  , for ratio of each line (defined piece),step: 4.20 opixnum = (ipixnum<<20)/step;  scale:4.20 = 1/step
    #define VKS_SCL_STEP05                        0x1f  //
//Bit 31:24        reserved
//Bit 23: 0        reg_vks_scl_step5         // unsigned , default = 590444  , for ratio of each line (defined piece),step: 4.20 opixnum = (ipixnum<<20)/step;  scale:4.20 = 1/step
    #define VKS_SCL_STEP06                        0x20  //
//Bit 31:24        reserved
//Bit 23: 0        reg_vks_scl_step6         // unsigned , default = 642257  , for ratio of each line (defined piece),step: 4.20 opixnum = (ipixnum<<20)/step;  scale:4.20 = 1/step
    #define VKS_SCL_STEP07                        0x21  //
//Bit 31:24        reserved
//Bit 23: 0        reg_vks_scl_step7         // unsigned , default = 694070  , for ratio of each line (defined piece),step: 4.20 opixnum = (ipixnum<<20)/step;  scale:4.20 = 1/step
    #define VKS_SCL_STEP08                        0x22  //
//Bit 31:24        reserved
//Bit 23: 0        reg_vks_scl_step8         // unsigned , default = 745884  , for ratio of each line (defined piece),step: 4.20 opixnum = (ipixnum<<20)/step;  scale:4.20 = 1/step
    #define VKS_SCL_STEP09                        0x23  //
//Bit 31:24        reserved
//Bit 23: 0        reg_vks_scl_step9         // unsigned , default = 797697  , for ratio of each line (defined piece),step: 4.20 opixnum = (ipixnum<<20)/step;  scale:4.20 = 1/step
    #define VKS_SCL_STEP10                        0x24  //
//Bit 31:24        reserved
//Bit 23: 0        reg_vks_scl_step10        // unsigned , default = 849510  , for ratio of each line (defined piece),step: 4.20 opixnum = (ipixnum<<20)/step;  scale:4.20 = 1/step
    #define VKS_SCL_STEP11                        0x25  //
//Bit 31:24        reserved
//Bit 23: 0        reg_vks_scl_step11        // unsigned , default = 901323  , for ratio of each line (defined piece),step: 4.20 opixnum = (ipixnum<<20)/step;  scale:4.20 = 1/step
    #define VKS_SCL_STEP12                        0x26  //
//Bit 31:24        reserved
//Bit 23: 0        reg_vks_scl_step12        // unsigned , default = 953136  , for ratio of each line (defined piece),step: 4.20 opixnum = (ipixnum<<20)/step;  scale:4.20 = 1/step
    #define VKS_SCL_STEP13                        0x27  //
//Bit 31:24        reserved
//Bit 23: 0        reg_vks_scl_step13        // unsigned , default = 1004949  , for ratio of each line (defined piece),step: 4.20 opixnum = (ipixnum<<20)/step;  scale:4.20 = 1/step
    #define VKS_SCL_STEP14                        0x28  //
//Bit 31:24        reserved
//Bit 23: 0        reg_vks_scl_step14        // unsigned , default = 1056763  , for ratio of each line (defined piece),step: 4.20 opixnum = (ipixnum<<20)/step;  scale:4.20 = 1/step
    #define VKS_SCL_STEP15                        0x29  //
//Bit 31:24        reserved
//Bit 23: 0        reg_vks_scl_step15        // unsigned , default = 1108576  , for ratio of each line (defined piece),step: 4.20 opixnum = (ipixnum<<20)/step;  scale:4.20 = 1/step
    #define VKS_SCL_STEP16                        0x2a  //
//Bit 31:24        reserved
//Bit 23: 0        reg_vks_scl_step16        // unsigned , default = 1160389  , for ratio of each line (defined piece),step: 4.20 opixnum = (ipixnum<<20)/step;  scale:4.20 = 1/step
    #define VKS_PPS_YCOEF00                       0x2b  //
//Bit 31:24        reg_vks_ycoef0            // signed , default = 0  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef1            // signed , default = 128  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef2            // signed , default = 0  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef3            // signed , default = 0  poly-phase scalar coefs
    #define VKS_PPS_YCOEF01                       0x2c  //
//Bit 31:24        reg_vks_ycoef4            // signed , default = 0  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef5            // signed , default = 127  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef6            // signed , default = 1  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef7            // signed , default = 0  poly-phase scalar coefs
    #define VKS_PPS_YCOEF02                       0x2d  //
//Bit 31:24        reg_vks_ycoef8            // signed , default = -1  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef9            // signed , default = 127  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef10           // signed , default = 2  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef11           // signed , default = 0  poly-phase scalar coefs
    #define VKS_PPS_YCOEF03                       0x2e  //
//Bit 31:24        reg_vks_ycoef12           // signed , default = -2  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef13           // signed , default = 127  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef14           // signed , default = 3  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef15           // signed , default = 0  poly-phase scalar coefs
    #define VKS_PPS_YCOEF04                       0x2f  //
//Bit 31:24        reg_vks_ycoef16           // signed , default = -3  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef17           // signed , default = 126  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef18           // signed , default = 5  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef19           // signed , default = 0  poly-phase scalar coefs
    #define VKS_PPS_YCOEF05                       0x30  //
//Bit 31:24        reg_vks_ycoef20           // signed , default = -4  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef21           // signed , default = 126  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef22           // signed , default = 6  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef23           // signed , default = 0  poly-phase scalar coefs
    #define VKS_PPS_YCOEF06                       0x31  //
//Bit 31:24        reg_vks_ycoef24           // signed , default = -5  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef25           // signed , default = 125  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef26           // signed , default = 8  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef27           // signed , default = 0  poly-phase scalar coefs
    #define VKS_PPS_YCOEF07                       0x32  //
//Bit 31:24        reg_vks_ycoef28           // signed , default = -5  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef29           // signed , default = 124  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef30           // signed , default = 9  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef31           // signed , default = 0  poly-phase scalar coefs
    #define VKS_PPS_YCOEF08                       0x33  //
//Bit 31:24        reg_vks_ycoef32           // signed , default = -6  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef33           // signed , default = 123  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef34           // signed , default = 11  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef35           // signed , default = 0  poly-phase scalar coefs
    #define VKS_PPS_YCOEF09                       0x34  //
//Bit 31:24        reg_vks_ycoef36           // signed , default = -6  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef37           // signed , default = 122  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef38           // signed , default = 13  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef39           // signed , default = -1  poly-phase scalar coefs
    #define VKS_PPS_YCOEF10                       0x35  //
//Bit 31:24        reg_vks_ycoef40           // signed , default = -7  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef41           // signed , default = 121  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef42           // signed , default = 15  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef43           // signed , default = -1  poly-phase scalar coefs
    #define VKS_PPS_YCOEF11                       0x36  //
//Bit 31:24        reg_vks_ycoef44           // signed , default = -7  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef45           // signed , default = 119  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef46           // signed , default = 17  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef47           // signed , default = -1  poly-phase scalar coefs
    #define VKS_PPS_YCOEF12                       0x37  //
//Bit 31:24        reg_vks_ycoef48           // signed , default = -8  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef49           // signed , default = 118  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef50           // signed , default = 19  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef51           // signed , default = -1  poly-phase scalar coefs
    #define VKS_PPS_YCOEF13                       0x38  //
//Bit 31:24        reg_vks_ycoef52           // signed , default = -8  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef53           // signed , default = 116  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef54           // signed , default = 22  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef55           // signed , default = -2  poly-phase scalar coefs
    #define VKS_PPS_YCOEF14                       0x39  //
//Bit 31:24        reg_vks_ycoef56           // signed , default = -8  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef57           // signed , default = 114  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef58           // signed , default = 24  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef59           // signed , default = -2  poly-phase scalar coefs
    #define VKS_PPS_YCOEF15                       0x3a  //
//Bit 31:24        reg_vks_ycoef60           // signed , default = -8  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef61           // signed , default = 112  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef62           // signed , default = 26  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef63           // signed , default = -2  poly-phase scalar coefs
    #define VKS_PPS_YCOEF16                       0x3b  //
//Bit 31:24        reg_vks_ycoef64           // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef65           // signed , default = 111  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef66           // signed , default = 29  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef67           // signed , default = -3  poly-phase scalar coefs
    #define VKS_PPS_YCOEF17                       0x3c  //
//Bit 31:24        reg_vks_ycoef68           // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef69           // signed , default = 109  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef70           // signed , default = 31  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef71           // signed , default = -3  poly-phase scalar coefs
    #define VKS_PPS_YCOEF18                       0x3d  //
//Bit 31:24        reg_vks_ycoef72           // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef73           // signed , default = 107  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef74           // signed , default = 33  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef75           // signed , default = -3  poly-phase scalar coefs
    #define VKS_PPS_YCOEF19                       0x3e  //
//Bit 31:24        reg_vks_ycoef76           // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef77           // signed , default = 104  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef78           // signed , default = 36  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef79           // signed , default = -3  poly-phase scalar coefs
    #define VKS_PPS_YCOEF20                       0x3f  //
//Bit 31:24        reg_vks_ycoef80           // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef81           // signed , default = 102  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef82           // signed , default = 39  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef83           // signed , default = -4  poly-phase scalar coefs
    #define VKS_PPS_YCOEF21                       0x40  //
//Bit 31:24        reg_vks_ycoef84           // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef85           // signed , default = 100  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef86           // signed , default = 41  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef87           // signed , default = -4  poly-phase scalar coefs
    #define VKS_PPS_YCOEF22                       0x41  //
//Bit 31:24        reg_vks_ycoef88           // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef89           // signed , default = 97  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef90           // signed , default = 44  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef91           // signed , default = -4  poly-phase scalar coefs
    #define VKS_PPS_YCOEF23                       0x42  //
//Bit 31:24        reg_vks_ycoef92           // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef93           // signed , default = 95  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef94           // signed , default = 47  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef95           // signed , default = -5  poly-phase scalar coefs
    #define VKS_PPS_YCOEF24                       0x43  //
//Bit 31:24        reg_vks_ycoef96           // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef97           // signed , default = 93  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef98           // signed , default = 49  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef99           // signed , default = -5  poly-phase scalar coefs
    #define VKS_PPS_YCOEF25                       0x44  //
//Bit 31:24        reg_vks_ycoef100          // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef101          // signed , default = 90  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef102          // signed , default = 52  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef103          // signed , default = -5  poly-phase scalar coefs
    #define VKS_PPS_YCOEF26                       0x45  //
//Bit 31:24        reg_vks_ycoef104          // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef105          // signed , default = 88  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef106          // signed , default = 55  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef107          // signed , default = -6  poly-phase scalar coefs
    #define VKS_PPS_YCOEF27                       0x46  //
//Bit 31:24        reg_vks_ycoef108          // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef109          // signed , default = 85  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef110          // signed , default = 58  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef111          // signed , default = -6  poly-phase scalar coefs
    #define VKS_PPS_YCOEF28                       0x47  //
//Bit 31:24        reg_vks_ycoef112          // signed , default = -8  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef113          // signed , default = 82  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef114          // signed , default = 60  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef115          // signed , default = -6  poly-phase scalar coefs
    #define VKS_PPS_YCOEF29                       0x48  //
//Bit 31:24        reg_vks_ycoef116          // signed , default = -8  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef117          // signed , default = 80  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef118          // signed , default = 63  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef119          // signed , default = -7  poly-phase scalar coefs
    #define VKS_PPS_YCOEF30                       0x49  //
//Bit 31:24        reg_vks_ycoef120          // signed , default = -8  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef121          // signed , default = 77  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef122          // signed , default = 66  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef123          // signed , default = -7  poly-phase scalar coefs
    #define VKS_PPS_YCOEF31                       0x4a  //
//Bit 31:24        reg_vks_ycoef124          // signed , default = -8  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef125          // signed , default = 74  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef126          // signed , default = 69  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef127          // signed , default = -7  poly-phase scalar coefs
    #define VKS_PPS_YCOEF32                       0x4b  //
//Bit 31:24        reg_vks_ycoef128          // signed , default = -8  poly-phase scalar coefs
//Bit 23:16        reg_vks_ycoef129          // signed , default = 72  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ycoef130          // signed , default = 72  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ycoef131          // signed , default = -8  poly-phase scalar coefs
    #define VKS_PPS_CCOEF00                       0x4c  //
//Bit 31:24        reg_vks_ccoef0            // signed , default = 0  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef1            // signed , default = 128  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef2            // signed , default = 0  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef3            // signed , default = 0  poly-phase scalar coefs
    #define VKS_PPS_CCOEF01                       0x4d  //
//Bit 31:24        reg_vks_ccoef4            // signed , default = 0  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef5            // signed , default = 127  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef6            // signed , default = 1  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef7            // signed , default = 0  poly-phase scalar coefs
    #define VKS_PPS_CCOEF02                       0x4e  //
//Bit 31:24        reg_vks_ccoef8            // signed , default = -1  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef9            // signed , default = 127  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef10           // signed , default = 2  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef11           // signed , default = 0  poly-phase scalar coefs
    #define VKS_PPS_CCOEF03                       0x4f  //
//Bit 31:24        reg_vks_ccoef12           // signed , default = -2  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef13           // signed , default = 127  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef14           // signed , default = 3  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef15           // signed , default = 0  poly-phase scalar coefs
    #define VKS_PPS_CCOEF04                       0x50  //
//Bit 31:24        reg_vks_ccoef16           // signed , default = -3  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef17           // signed , default = 126  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef18           // signed , default = 5  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef19           // signed , default = 0  poly-phase scalar coefs
    #define VKS_PPS_CCOEF05                       0x51  //
//Bit 31:24        reg_vks_ccoef20           // signed , default = -4  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef21           // signed , default = 126  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef22           // signed , default = 6  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef23           // signed , default = 0  poly-phase scalar coefs
    #define VKS_PPS_CCOEF06                       0x52  //
//Bit 31:24        reg_vks_ccoef24           // signed , default = -5  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef25           // signed , default = 125  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef26           // signed , default = 8  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef27           // signed , default = 0  poly-phase scalar coefs
    #define VKS_PPS_CCOEF07                       0x53  //
//Bit 31:24        reg_vks_ccoef28           // signed , default = -5  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef29           // signed , default = 124  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef30           // signed , default = 9  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef31           // signed , default = 0  poly-phase scalar coefs
    #define VKS_PPS_CCOEF08                       0x54  //
//Bit 31:24        reg_vks_ccoef32           // signed , default = -6  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef33           // signed , default = 123  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef34           // signed , default = 11  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef35           // signed , default = 0  poly-phase scalar coefs
    #define VKS_PPS_CCOEF09                       0x55  //
//Bit 31:24        reg_vks_ccoef36           // signed , default = -6  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef37           // signed , default = 122  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef38           // signed , default = 13  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef39           // signed , default = -1  poly-phase scalar coefs
    #define VKS_PPS_CCOEF10                       0x56  //
//Bit 31:24        reg_vks_ccoef40           // signed , default = -7  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef41           // signed , default = 121  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef42           // signed , default = 15  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef43           // signed , default = -1  poly-phase scalar coefs
    #define VKS_PPS_CCOEF11                       0x57  //
//Bit 31:24        reg_vks_ccoef44           // signed , default = -7  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef45           // signed , default = 119  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef46           // signed , default = 17  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef47           // signed , default = -1  poly-phase scalar coefs
    #define VKS_PPS_CCOEF12                       0x58  //
//Bit 31:24        reg_vks_ccoef48           // signed , default = -8  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef49           // signed , default = 118  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef50           // signed , default = 19  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef51           // signed , default = -1  poly-phase scalar coefs
    #define VKS_PPS_CCOEF13                       0x59  //
//Bit 31:24        reg_vks_ccoef52           // signed , default = -8  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef53           // signed , default = 116  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef54           // signed , default = 22  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef55           // signed , default = -2  poly-phase scalar coefs
    #define VKS_PPS_CCOEF14                       0x5a  //
//Bit 31:24        reg_vks_ccoef56           // signed , default = -8  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef57           // signed , default = 114  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef58           // signed , default = 24  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef59           // signed , default = -2  poly-phase scalar coefs
    #define VKS_PPS_CCOEF15                       0x5b  //
//Bit 31:24        reg_vks_ccoef60           // signed , default = -8  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef61           // signed , default = 112  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef62           // signed , default = 26  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef63           // signed , default = -2  poly-phase scalar coefs
    #define VKS_PPS_CCOEF16                       0x5c  //
//Bit 31:24        reg_vks_ccoef64           // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef65           // signed , default = 111  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef66           // signed , default = 29  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef67           // signed , default = -3  poly-phase scalar coefs
    #define VKS_PPS_CCOEF17                       0x5d  //
//Bit 31:24        reg_vks_ccoef68           // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef69           // signed , default = 109  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef70           // signed , default = 31  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef71           // signed , default = -3  poly-phase scalar coefs
    #define VKS_PPS_CCOEF18                       0x5e  //
//Bit 31:24        reg_vks_ccoef72           // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef73           // signed , default = 107  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef74           // signed , default = 33  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef75           // signed , default = -3  poly-phase scalar coefs
    #define VKS_PPS_CCOEF19                       0x5f  //
//Bit 31:24        reg_vks_ccoef76           // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef77           // signed , default = 104  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef78           // signed , default = 36  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef79           // signed , default = -3  poly-phase scalar coefs
    #define VKS_PPS_CCOEF20                       0x60  //
//Bit 31:24        reg_vks_ccoef80           // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef81           // signed , default = 102  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef82           // signed , default = 39  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef83           // signed , default = -4  poly-phase scalar coefs
    #define VKS_PPS_CCOEF21                       0x61  //
//Bit 31:24        reg_vks_ccoef84           // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef85           // signed , default = 100  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef86           // signed , default = 41  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef87           // signed , default = -4  poly-phase scalar coefs
    #define VKS_PPS_CCOEF22                       0x62  //
//Bit 31:24        reg_vks_ccoef88           // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef89           // signed , default = 97  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef90           // signed , default = 44  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef91           // signed , default = -4  poly-phase scalar coefs
    #define VKS_PPS_CCOEF23                       0x63  //
//Bit 31:24        reg_vks_ccoef92           // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef93           // signed , default = 95  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef94           // signed , default = 47  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef95           // signed , default = -5  poly-phase scalar coefs
    #define VKS_PPS_CCOEF24                       0x64  //
//Bit 31:24        reg_vks_ccoef96           // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef97           // signed , default = 93  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef98           // signed , default = 49  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef99           // signed , default = -5  poly-phase scalar coefs
    #define VKS_PPS_CCOEF25                       0x65  //
//Bit 31:24        reg_vks_ccoef100          // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef101          // signed , default = 90  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef102          // signed , default = 52  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef103          // signed , default = -5  poly-phase scalar coefs
    #define VKS_PPS_CCOEF26                       0x66  //
//Bit 31:24        reg_vks_ccoef104          // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef105          // signed , default = 88  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef106          // signed , default = 55  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef107          // signed , default = -6  poly-phase scalar coefs
    #define VKS_PPS_CCOEF27                       0x67  //
//Bit 31:24        reg_vks_ccoef108          // signed , default = -9  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef109          // signed , default = 85  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef110          // signed , default = 58  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef111          // signed , default = -6  poly-phase scalar coefs
    #define VKS_PPS_CCOEF28                       0x68  //
//Bit 31:24        reg_vks_ccoef112          // signed , default = -8  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef113          // signed , default = 82  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef114          // signed , default = 60  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef115          // signed , default = -6  poly-phase scalar coefs
    #define VKS_PPS_CCOEF29                       0x69  //
//Bit 31:24        reg_vks_ccoef116          // signed , default = -8  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef117          // signed , default = 80  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef118          // signed , default = 63  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef119          // signed , default = -7  poly-phase scalar coefs
    #define VKS_PPS_CCOEF30                       0x6a  //
//Bit 31:24        reg_vks_ccoef120          // signed , default = -8  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef121          // signed , default = 77  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef122          // signed , default = 66  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef123          // signed , default = -7  poly-phase scalar coefs
    #define VKS_PPS_CCOEF31                       0x6b  //
//Bit 31:24        reg_vks_ccoef124          // signed , default = -8  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef125          // signed , default = 74  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef126          // signed , default = 69  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef127          // signed , default = -7  poly-phase scalar coefs
    #define VKS_PPS_CCOEF32                       0x6c  //
//Bit 31:24        reg_vks_ccoef128          // signed , default = -8  poly-phase scalar coefs
//Bit 23:16        reg_vks_ccoef129          // signed , default = 72  poly-phase scalar coefs
//Bit 15: 8        reg_vks_ccoef130          // signed , default = 72  poly-phase scalar coefs
//Bit  7: 0        reg_vks_ccoef131          // signed , default = -8  poly-phase scalar coefs


// synopsys translate_off
// synopsys translate_on
//
// Closing file:  vkstone_regs.h
//
////=================================================================////
//// vpp dither
////=================================================================////
// 8'h20-8'h3f
//
// Reading file:  vpp_dither_regs.h
//
// synopsys translate_off
// synopsys translate_on
#define VPP_VE_DITHER_CTRL                         ((0x3120  << 2) + 0xff900000)
#define VPP_VE_DITHER_LUT_1                        ((0x3121  << 2) + 0xff900000)
#define VPP_VE_DITHER_LUT_2                        ((0x3122  << 2) + 0xff900000)
#define VPP_VE_DITHER_LUT_3                        ((0x3123  << 2) + 0xff900000)
#define VPP_VE_DITHER_LUT_4                        ((0x3124  << 2) + 0xff900000)
#define VPP_VE_DITHER_LUT_5                        ((0x3125  << 2) + 0xff900000)
#define VPP_VE_DITHER_LUT_6                        ((0x3126  << 2) + 0xff900000)
#define VPP_VE_DITHER_LUT_7                        ((0x3127  << 2) + 0xff900000)
#define VPP_VE_DITHER_LUT_8                        ((0x3128  << 2) + 0xff900000)
#define VPP_VE_DITHER_LUT_9                        ((0x3129  << 2) + 0xff900000)
#define VPP_VE_DITHER_LUT_10                       ((0x312a  << 2) + 0xff900000)
#define VPP_VE_DITHER_LUT_11                       ((0x312b  << 2) + 0xff900000)
#define VPP_VE_DITHER_LUT_12                       ((0x312c  << 2) + 0xff900000)
#define VPP_OSDSC_DITHER_CTRL                      ((0x3130  << 2) + 0xff900000)
#define VPP_OSDSC_DITHER_LUT_1                     ((0x3131  << 2) + 0xff900000)
#define VPP_OSDSC_DITHER_LUT_2                     ((0x3132  << 2) + 0xff900000)
#define VPP_OSDSC_DITHER_LUT_3                     ((0x3133  << 2) + 0xff900000)
#define VPP_OSDSC_DITHER_LUT_4                     ((0x3134  << 2) + 0xff900000)
#define VPP_OSDSC_DITHER_LUT_5                     ((0x3135  << 2) + 0xff900000)
#define VPP_OSDSC_DITHER_LUT_6                     ((0x3136  << 2) + 0xff900000)
#define VPP_OSDSC_DITHER_LUT_7                     ((0x3137  << 2) + 0xff900000)
#define VPP_OSDSC_DITHER_LUT_8                     ((0x3138  << 2) + 0xff900000)
#define VPP_OSDSC_DITHER_LUT_9                     ((0x3139  << 2) + 0xff900000)
#define VPP_OSDSC_DITHER_LUT_10                    ((0x313a  << 2) + 0xff900000)
#define VPP_OSDSC_DITHER_LUT_11                    ((0x313b  << 2) + 0xff900000)
#define VPP_OSDSC_DITHER_LUT_12                    ((0x313c  << 2) + 0xff900000)
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  vpp_dither_regs.h
//
// 8'h40-8'h4f
//
// Reading file:  osdsc_deband_regs.h
//
// synopsys translate_off
// synopsys translate_on
#define OSD_DB_FLT_CTRL                            ((0x3140  << 2) + 0xff900000)
//Bit 31:27        reserved
//Bit 26           reg_nrdeband_reset1       // unsigned , default = 1  , 0 : no reload chrm seed 1: reload chrm seed
//Bit 25           reg_nrdeband_reset0       // unsigned , default = 1  , 0 : no reload luma seed 1: reload luma seed
//Bit 24           reg_nrdeband_rgb          // unsigned , default = 0  , 0 : yuv 1: RGB
//Bit 23           reg_nrdeband_en11         // unsigned , default = 0  , debanding registers of side lines, [0] for luma,   same for below
//Bit 22           reg_nrdeband_en10         // unsigned , default = 0  , debanding registers of side lines, [1] for chroma, same for below
//Bit 21           reg_nrdeband_siderand     // unsigned , default = 1  , options to use side two lines use the rand, instead of use for the YUV three component of middle line, 0: seed[3]/bandrand[3] for middle line yuv; 1: seed[3]/bandrand[3] for nearby three lines Y;
//Bit 20           reg_nrdeband_randmode     // unsigned , default = 0  , mode of rand noise adding, 0: same noise strength for all difs; else: strenght of noise will not exceed the difs, MIN((pPKReg->reg_nrdeband_bandrand[m]), noise[m])
//Bit 19:17        reg_nrdeband_bandrand2    // unsigned , default = 6
//Bit 16            reserved
//Bit 15:13        reg_nrdeband_bandrand1    // unsigned , default = 6
//Bit 12            reserved
//Bit 11: 9        reg_nrdeband_bandrand0    // unsigned , default = 6
//Bit  8            reserved
//Bit  7           reg_nrdeband_hpxor1       // unsigned , default = 1   , debanding random hp portion xor, [0] for luma
//Bit  6           reg_nrdeband_hpxor0       // unsigned , default = 1   , debanding random hp portion xor, [1] for chroma
//Bit  5           reg_nrdeband_en1          // unsigned , default = 0   , debanding registers,  for luma
//Bit  4           reg_nrdeband_en0          // unsigned , default = 0   , debanding registers,  for chroma
//Bit  3: 2        reg_nrdeband_lpf_mode1    // unsigned , default = 2   , lpf mode, 0: 3x3, 1:3x5; 2: 5x5; 3:5x7
//Bit  1: 0        reg_nrdeband_lpf_mode0    // unsigned , default = 2   , lpf mode, 0: 3x3, 1:3x5; 2: 5x5; 3:5x7
#define OSD_DB_FLT_CTRL1                           ((0x3141  << 2) + 0xff900000)
//Bit 31:18        reserved
//Bit 17:16        reg_nrdeband_noise_rs     // unsigned , default = 2
//Bit 15:12        reg_nrdeband_randgain     // unsigned , default = 8
//Bit 11            reserved
//Bit 10: 8        reg_nrdeband_bandrand5    // unsigned , default = 6
//Bit  7            reserved
//Bit  6: 4        reg_nrdeband_bandrand4    // unsigned , default = 6
//Bit  3            reserved
//Bit  2: 0        reg_nrdeband_bandrand3    // unsigned , default = 6
#define OSD_DB_FLT_LUMA_THRD                       ((0x3142  << 2) + 0xff900000)
//Bit 31:30        reserved
//Bit 29:24        reg_nrdeband_luma_th3     // unsigned , default = 36   , threshold to |Y-Ylpf|, if < th[0] use lpf
//Bit 23:22        reserved
//Bit 21:16        reg_nrdeband_luma_th2     // unsigned , default = 28   , elseif <th[1] use (lpf*3 + y)/4
//Bit 15:14        reserved
//Bit 13: 8        reg_nrdeband_luma_th1     // unsigned , default = 24   , elseif <th[1] use (lpf*3 + y)/4elseif <th[2] (lpf*1 + y)/2
//Bit  7: 6        reserved
//Bit  5: 0        reg_nrdeband_luma_th0     // unsigned , default = 20   , elseif <th[1] use (lpf*3 + y)/4elseif elseif <th[3] (lpf*1 + 3*y)/4; else
#define OSD_DB_FLT_CHRM_THRD                       ((0x3143  << 2) + 0xff900000)
//Bit 31:30        reserved
//Bit 29:24        reg_nrdeband_chrm_th3     // unsigned , default = 36   , threshold to |Y-Ylpf|, if < th[0] use lpf
//Bit 23:22        reserved
//Bit 21:16        reg_nrdeband_chrm_th2     // unsigned , default = 28   , elseif <th[1] use (lpf*3 + y)/4
//Bit 15:14        reserved
//Bit 13: 8        reg_nrdeband_chrm_th1     // unsigned , default = 24   , elseif <th[1] use (lpf*3 + y)/4elseif <th[2] (lpf*1 + y)/2
//Bit  7: 6        reserved
//Bit  5: 0        reg_nrdeband_chrm_th0     // unsigned , default = 20   , elseif <th[1] use (lpf*3 + y)/4elseif elseif
#define OSD_DB_FLT_RANDLUT                         ((0x3144  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:21        reg_nrdeband_randslut7    // unsigned , default = 1   rand lut7
//Bit 20:18        reg_nrdeband_randslut6    // unsigned , default = 1   rand lut6
//Bit 17:15        reg_nrdeband_randslut5    // unsigned , default = 1   rand lut5
//Bit 14:12        reg_nrdeband_randslut4    // unsigned , default = 1   rand lut4
//Bit 11: 9        reg_nrdeband_randslut3    // unsigned , default = 1   rand lut3
//Bit  8: 6        reg_nrdeband_randslut2    // unsigned , default = 1   rand lut2
//Bit  5: 3        reg_nrdeband_randslut1    // unsigned , default = 1   rand lut1
//Bit  2: 0        reg_nrdeband_randslut0    // unsigned , default = 1   rand lut0
#define OSD_DB_FLT_PXI_THRD                        ((0x3145  << 2) + 0xff900000)
//Bit 31:26        reserved
//Bit 25:16        reg_nrdeband_yc_th1       // unsigned , default = 0   ,threshold to luma/|u/v| for using the denoise
//Bit 15:10        reserved
//Bit  9: 0        reg_nrdeband_yc_th0       // unsigned , default = 0   ,threshold to luma/|u/v| for using the denoise
#define OSD_DB_FLT_SEED_Y                          ((0x3146  << 2) + 0xff900000)
//Bit 31: 0        reg_nrdeband_seed0        // unsigned , default = 1621438240  ,debanding noise adding seed for Y. seed[0]= 0x60a52f20; as default
#define OSD_DB_FLT_SEED_U                          ((0x3147  << 2) + 0xff900000)
//Bit 31: 0        reg_nrdeband_seed1        // unsigned , default = 1621438247  ,debanding noise adding seed for U. seed[0]= 0x60a52f27; as default
#define OSD_DB_FLT_SEED_V                          ((0x3148  << 2) + 0xff900000)
//Bit 31: 0        reg_nrdeband_seed2        // unsigned , default = 1621438242  ,debanding noise adding seed for V. seed[0]= 0x60a52f22; as default
#define OSD_DB_FLT_SEED3                           ((0x3149  << 2) + 0xff900000)
//Bit 31: 0        reg_nrdeband_seed3        // unsigned , default = 1621438242  ,debanding noise adding seed for V. seed[0]= 0x60a52f22; as default
#define OSD_DB_FLT_SEED4                           ((0x314a  << 2) + 0xff900000)
//Bit 31: 0        reg_nrdeband_seed4        // unsigned , default = 1621438242  ,debanding noise adding seed for V. seed[0]= 0x60a52f22; as default
#define OSD_DB_FLT_SEED5                           ((0x314b  << 2) + 0xff900000)
//Bit 31: 0        reg_nrdeband_seed5        // unsigned , default = 1621438242  ,debanding noise adding seed for V. seed[0]= 0x60a52f22; as default
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  osdsc_deband_regs.h
//
//register definition for xvycc
// 8'h50-8'h7f
//
// Reading file:  xvycc_regs.h
//
// synopsys translate_off
// synopsys translate_on
//    `define XVYCC_VCBUS_BASE	   8'hfe
#define XVYCC_INV_LUT_Y_ADDR_PORT                  ((0x3158  << 2) + 0xff900000)
//Bit 31:7, reserved
//Bit  6:0,  xvycc_inv_lut_y_addr;
#define XVYCC_INV_LUT_Y_DATA_PORT                  ((0x3159  << 2) + 0xff900000)
//Bit 31:12, reserved
//Bit  11:0, xvycc_inv_lut_y_data;
#define XVYCC_INV_LUT_U_ADDR_PORT                  ((0x315a  << 2) + 0xff900000)
//Bit 31:6, reserved
//Bit  5:0,  xvycc_inv_lut_u_addr;
#define XVYCC_INV_LUT_U_DATA_PORT                  ((0x315b  << 2) + 0xff900000)
//Bit 31:12, reserved
//Bit  11:0, xvycc_inv_lut_u_data;
#define XVYCC_INV_LUT_V_ADDR_PORT                  ((0x315c  << 2) + 0xff900000)
//Bit 31:6, reserved
//Bit  5:0,  xvycc_inv_lut_v_addr;
#define XVYCC_INV_LUT_V_DATA_PORT                  ((0x315d  << 2) + 0xff900000)
//Bit 31:12, reserved
//Bit  11:0, xvycc_inv_lut_v_data;
#define XVYCC_LUT_R_ADDR_PORT                      ((0x315e  << 2) + 0xff900000)
//Bit 31:7, reserved
//Bit  6:0,  xvycc_lut_r_addr;
#define XVYCC_LUT_R_DATA_PORT                      ((0x315f  << 2) + 0xff900000)
//Bit 31:10, reserved
//Bit  9:0,  xvycc_lut_r_data;
#define XVYCC_LUT_G_ADDR_PORT                      ((0x3160  << 2) + 0xff900000)
//Bit 31:7, reserved
//Bit  6:0,  xvycc_lut_g_addr;
#define XVYCC_LUT_G_DATA_PORT                      ((0x3161  << 2) + 0xff900000)
//Bit 31:10, reserved
//Bit  9:0,  xvycc_lut_g_data;
#define XVYCC_LUT_B_ADDR_PORT                      ((0x3162  << 2) + 0xff900000)
//Bit 31:7, reserved
//Bit  6:0,  xvycc_lut_b_addr;
#define XVYCC_LUT_B_DATA_PORT                      ((0x3163  << 2) + 0xff900000)
//Bit 31:10, reserved
//Bit  9:0,  xvycc_lut_b_data;
#define XVYCC_INV_LUT_CTL                          ((0x3164  << 2) + 0xff900000)
//Bit 31:15, reserved
//Bit 14:12, reg_xvycc_cmpr_invlut_enable    enable for xvycc compression inverse-lut [2] for Y, [1] for U, [0] for V default=0
//Bit 11:10, reg_xvycc_cmpr_invlut_vscl_1   v LUT input scale for positive portion   default=0
//Bit  9: 8, reg_xvycc_cmpr_invlut_vscl_0   v LUT input scale for negative portion   default=0
//Bit  7: 6, reg_xvycc_cmpr_invlut_uscl_1   u LUT input scale for positive portion   default=0
//Bit  5: 4, reg_xvycc_cmpr_invlut_uscl_0   u LUT input scale for negative portion   default=0
//Bit  3: 2, reg_xvycc_cmpr_invlut_yscl_1   y LUT input scale for positive portion   default=0
//Bit  1: 0, reg_xvycc_cmpr_invlut_yscl_0   y LUT input scale for negative portion   default=0
#define XVYCC_LUT_CTL                              ((0x3165  << 2) + 0xff900000)
//Bit 31: 7, reserved
//Bit  6: 4, reg_xvycc_lut_enable  LUT enable [6] for R, [5] for G, [4] for B  default=0
//Bit  3: 2, reg_xvycc_lut_scl_1   LUT input scale for positive portion   default=0
//Bit  1: 0, reg_xvycc_lut_scl_0   LUT input scale for negative portion   default=0
#define XVYCC_VADJ1_CURV_0                         ((0x3166  << 2) + 0xff900000)
//Bit 31:24, vadj1_softcon_curv0_ci                         default=0
//Bit 23:12, vadj1_softcon_curv0_b                          default=0
//Bit 11: 0, vadj1_softcon_curv0_a                          default=0
#define XVYCC_VADJ1_CURV_1                         ((0x3167  << 2) + 0xff900000)
//Bit 31:13, reserved
//Bit 12: 4, vadj1_softcon_curv0_g                          default=0
//Bit     3, reserved
//Bit  2: 0, vadj1_softcon_curv0_cs                         default=0
#define XVYCC_VADJ1_CURV_2                         ((0x3168  << 2) + 0xff900000)
//Bit 31:24, vadj1_softcon_curv1_ci                         default=0
//Bit 23:12, vadj1_softcon_curv1_b                          default=0
//Bit 11: 0, vadj1_softcon_curv1_a                          default=0
#define XVYCC_VADJ1_CURV_3                         ((0x3169  << 2) + 0xff900000)
//Bit 31:13, reserved
//Bit 12: 4, vadj1_softcon_curv1_g                          default=0
//Bit     3, reserved
//Bit  2: 0, vadj1_softcon_curv1_cs                         default=0
#define XVYCC_VADJ2_CURV_0                         ((0x316a  << 2) + 0xff900000)
//Bit 31:24, vadj2_softcon_curv0_ci                         default=0
//Bit 23:12, vadj2_softcon_curv0_b                          default=0
//Bit 11: 0, vadj2_softcon_curv0_a                          default=0
#define XVYCC_VADJ2_CURV_1                         ((0x316b  << 2) + 0xff900000)
//Bit 31:13, reserved
//Bit 12: 4, vadj2_softcon_curv0_g                          default=0
//Bit     3, reserved
//Bit  2: 0, vadj2_softcon_curv0_cs                         default=0
#define XVYCC_VADJ2_CURV_2                         ((0x316c  << 2) + 0xff900000)
//Bit 31:24, vadj2_softcon_curv1_ci                         default=0
//Bit 23:12, vadj2_softcon_curv1_b                          default=0
//Bit 11: 0, vadj2_softcon_curv1_a                          default=0
#define XVYCC_VADJ2_CURV_3                         ((0x316d  << 2) + 0xff900000)
//Bit 31:13, reserved
//Bit 12: 4, vadj2_softcon_curv1_g                          default=0
//Bit     3, reserved
//Bit  2: 0, vadj2_softcon_curv1_cs                         default=0
#define XVYCC_VD1_RGB_CTRST                        ((0x3170  << 2) + 0xff900000)
//Bit 31:28, reserved
//Bit 27:16, reg_vd1_rgb_ctrst        u12, contrast in rgb.      default=1024
//Bit 15:14, reserved
//Bit 13: 4, reg_vd1_rgb_ctrst_blklvl u10, contrast blacklevel   default=64
//Bit  3: 2, reserved
//Bit     1, reg_vd1_rgbbst_en         u1, enable rgbbst         default=0
//Bit     0, reg_vd1_rgb_ctrst_prt     u1, enable signal to protect saturation in rgb.  default=1
#define XVYCC_VD1_RGB_BRGHT                        ((0x3171  << 2) + 0xff900000)
//Bit 31:16, reserved
//Bit 15: 4, reg_vd1_rgb_brght        s12, brightness level in rgb domain                              default=0
//Bit  3: 2, reserved
//Bit     1, reg_vd1_rgb_brght_prt     u1, enalbe signal to protect saturation in rgb                  default=1
//Bit     0, reg_vd1_rgbbst_dlut_x2    u1, enable signal to do x2 to the dlut cells before subtracting default=0
#define XVYCC_VD1_RGB_DLUT_0_3                     ((0x3172  << 2) + 0xff900000)
//Bit 31:24, reg_vd1_rgbbst_dlut0      u8,   default = 255
//Bit 23:16, reg_vd1_rgbbst_dlut1      u8,   default = 205
//Bit 15: 8, reg_vd1_rgbbst_dlut2      u8,   default = 171
//Bit  7: 0, reg_vd1_rgbbst_dlut3      u8,   default = 147
#define XVYCC_VD1_RGB_DLUT_4_7                     ((0x3173  << 2) + 0xff900000)
//Bit 31:24, reg_vd1_rgbbst_dlut4      u8,   default = 128
//Bit 23:16, reg_vd1_rgbbst_dlut5      u8,   default = 113
//Bit 15: 8, reg_vd1_rgbbst_dlut6      u8,   default = 102
//Bit  7: 0, reg_vd1_rgbbst_dlut7      u8,   default = 93
#define XVYCC_VD1_RGB_DLUT_8_11                    ((0x3174  << 2) + 0xff900000)
//Bit 31:24, reg_vd1_rgbbst_dlut8      u8,   default = 85
//Bit 23:16, reg_vd1_rgbbst_dlut9      u8,   default = 78
//Bit 15: 8, reg_vd1_rgbbst_dlut10     u8,   default = 73
//Bit  7: 0, reg_vd1_rgbbst_dlut11     u8,   default = 68
#define XVYCC_POST_RGB_CTRST                       ((0x3175  << 2) + 0xff900000)
//Bit 31:28, reserved
//Bit 27:16, reg_post_rgb_ctrst        u12, contrast in rgb.      default=1024
//Bit 15:14, reserved
//Bit 13: 4, reg_post_rgb_ctrst_blklvl u10, contrast blacklevel   default=64
//Bit  3: 2, reserved
//Bit     1, reg_post_rgbbst_en         u1, enable rgbbst         default=0
//Bit     0, reg_post_rgb_ctrst_prt     u1, enable signal to protect saturation in rgb.  default=1
#define XVYCC_POST_RGB_BRGHT                       ((0x3176  << 2) + 0xff900000)
//Bit 31:16, reserved
//Bit 15: 4, reg_post_rgb_brght        s12, brightness level in rgb domain                              default=0
//Bit  3: 2, reserved
//Bit     1, reg_post_rgb_brght_prt     u1, enalbe signal to protect saturation in rgb                  default=1
//Bit     0, reg_post_rgbbst_dlut_x2    u1, enable signal to do x2 to the dlut cells before subtracting default=0
#define XVYCC_POST_RGB_DLUT_0_3                    ((0x3177  << 2) + 0xff900000)
//Bit 31:24, reg_post_rgbbst_dlut0      u8,   default = 255
//Bit 23:16, reg_post_rgbbst_dlut1      u8,   default = 205
//Bit 15: 8, reg_post_rgbbst_dlut2      u8,   default = 171
//Bit  7: 0, reg_post_rgbbst_dlut3      u8,   default = 147
#define XVYCC_POST_RGB_DLUT_4_7                    ((0x3178  << 2) + 0xff900000)
//Bit 31:24, reg_post_rgbbst_dlut4      u8,   default = 128
//Bit 23:16, reg_post_rgbbst_dlut5      u8,   default = 113
//Bit 15: 8, reg_post_rgbbst_dlut6      u8,   default = 102
//Bit  7: 0, reg_post_rgbbst_dlut7      u8,   default = 93
#define XVYCC_POST_RGB_DLUT_8_11                   ((0x3179  << 2) + 0xff900000)
//Bit 31:24, reg_post_rgbbst_dlut8      u8,   default = 85
//Bit 23:16, reg_post_rgbbst_dlut9      u8,   default = 78
//Bit 15: 8, reg_post_rgbbst_dlut10     u8,   default = 73
//Bit  7: 0, reg_post_rgbbst_dlut11     u8,   default = 68
#define ADAPTIVE_SCALE_REG0                        ((0x3150  << 2) + 0xff900000)
//Bit 31,    reg_adaptive_scale_enable    u1,  default = 1
//Bit 27:16, reg_adpscl_ys_coef_0        u12,  default = 538
//Bit 11: 0, reg_adpscl_ys_coef_1        u12,  default = 1389
#define ADAPTIVE_SCALE_REG1                        ((0x3151  << 2) + 0xff900000)
//Bit 27:16, reg_adpscl_ys_coef_2        u12,  default = 121
//Bit 11: 0, reg_adpscl_alpha_0          u12,  default = 1024
#define ADAPTIVE_SCALE_REG2                        ((0x3152  << 2) + 0xff900000)
//Bit 27:16, reg_adpscl_alpha_1          u12,  default = 1024
//Bit 11: 0, reg_adpscl_alpha_2          u12,  default = 1024
#define ADAPTIVE_SCALE_REG3                        ((0x3153  << 2) + 0xff900000)
//Bit 31:16, reg_adpscl_beta_0          u16,  default = 0
//Bit 15: 0, reg_adpscl_beta_1          u16,  default = 0
#define ADAPTIVE_SCALE_REG4                        ((0x3154  << 2) + 0xff900000)
//Bit 31:16, reg_adpscl_beta_2          u16,  default = 0
#define ADAPTIVE_SCALE_ADDR                        ((0x3155  << 2) + 0xff900000)
//Bit 6:0,   reg_lut_addr               u7,  default = 0
#define ADAPTIVE_SCALE_DATA                        ((0x3156  << 2) + 0xff900000)
//Bit 11:0,  reg_lut_data               u12,  default = 0
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  xvycc_regs.h
//
//register definition for vd2 afbc dec
// 8'h80-8'h9f
//
// Reading file:  vd2_afbc_dec_regs.h
//
// synopsys translate_off
// synopsys translate_on
////===============================////
//// reg
////===============================////
#define VD2_AFBC_ENABLE                            ((0x3180  << 2) + 0xff900000)
//Bit   31:1,     reserved
//Bit   8,        dec_enable        unsigned  , default = 0
//Bit   7:1,      reserved
//Bit   0,        frm_start         unsigned  , default = 0
#define VD2_AFBC_MODE                              ((0x3181  << 2) + 0xff900000)
//Bit   31,       soft_reset        the use as go_field
//Bit   30,       reserved
//Bit   29,       ddr_sz_mode       uns, default = 0 , 0: fixed block ddr size 1 : unfixed block ddr size;
//Bit   28,       blk_mem_mode      uns, default = 0 , 0: fixed 16x128 size; 1 : fixed 12x128 size
//Bit   27:26,    rev_mode          uns, default = 0 , reverse mode
//Bit   25:24,    mif_urgent        uns, default = 3 , info mif and data mif urgent
//Bit   22:16,    hold_line_num
//Bit   15:14,    burst_len         uns, default = 1, 0: burst1 1:burst2 2:burst4
//Bit   13:8,     compbits_yuv      uns, default = 0 ,
//                                  bit 1:0,: y  component bitwidth : 00-8bit 01-9bit 10-10bit
//                                  bit 3:2,: u  component bitwidth : 00-8bit 01-9bit 10-10bit
//                                  bit 5:4,: v  component bitwidth : 00-8bit 01-9bit 10-10bit
//Bit   7:6,      vert_skip_y       uns, default = 0 , luma vert skip mode : 00-y0y1, 01-y0, 10-y1, 11-(y0+y1)/2
//Bit   5:4,      horz_skip_y       uns, default = 0 , luma horz skip mode : 00-y0y1, 01-y0, 10-y1, 11-(y0+y1)/2
//Bit   3:2,      vert_skip_uv      uns, default = 0 , chroma vert skip mode : 00-y0y1, 01-y0, 10-y1, 11-(y0+y1)/2
//Bit   1:0,      horz_skip_uv      uns, default = 0 , chroma horz skip mode : 00-y0y1, 01-y0, 10-y1, 11-(y0+y1)/2
#define VD2_AFBC_SIZE_IN                           ((0x3182  << 2) + 0xff900000)
//Bit   31:29,    reserved
//Bit   28:16     hsize_in          uns, default = 1920 , pic horz size in  unit: pixel
//Bit   15:13,    reserved
//Bit   12:0,     vsize_in          uns, default = 1080 , pic vert size in  unit: pixel
#define VD2_AFBC_DEC_DEF_COLOR                     ((0x3183  << 2) + 0xff900000)
//Bit   31:29,    reserved
//Bit   29:20,   def_color_y        uns, default = 0, afbc dec y default setting value
//Bit   19:10,   def_color_u        uns, default = 0, afbc dec u default setting value
//Bit    9: 0,   def_color_v        uns, default = 0, afbc dec v default setting value
#define VD2_AFBC_CONV_CTRL                         ((0x3184  << 2) + 0xff900000)
//Bit   31:12,   reserved
//Bit   11: 0,   conv_lbuf_len       uns, default = 256, unit=16 pixel need to set = 2^n
#define VD2_AFBC_LBUF_DEPTH                        ((0x3185  << 2) + 0xff900000)
//Bit   31:28,   reserved
//Bit   27:16,   dec_lbuf_depth      uns, default = 128; // unit= 8 pixel
//Bit   15:12,   reserved
//Bit   11:0,    mif_lbuf_depth      uns, default = 128;
#define VD2_AFBC_HEAD_BADDR                        ((0x3186  << 2) + 0xff900000)
//Bit   31:0,   mif_info_baddr      uns, default = 32'h0;
#define VD2_AFBC_BODY_BADDR                        ((0x3187  << 2) + 0xff900000)
//Bit   31:0,   mif_data_baddr      uns, default = 32'h0001_0000;
#define VD2_AFBC_SIZE_OUT                          ((0x3188  << 2) + 0xff900000)
//Bit   31:29,   reserved
//Bit   28:16,   hsize_out          uns, default = 1920 ; // unit: 1 pixel
//Bit   15:13,   reserved
//Bit    12:0,   vsize_out          uns, default = 1080 ; // unit: 1 pixel
#define VD2_AFBC_OUT_YSCOPE                        ((0x3189  << 2) + 0xff900000)
//Bit   31:29,   reserved
//Bit   28:16,   out_vert_bgn        uns, default = 0    ; // unit: 1 pixel
//Bit   15:13,   reserved
//Bit    12:0,   out_vert_end        uns, default = 1079 ; // unit: 1 pixel
#define VD2_AFBC_STAT                              ((0x318a  << 2) + 0xff900000)
//Bit   31:1,   reserved
//Bit      0,   frm_end_stat         uns, frame end status
#define VD2_AFBC_VD_CFMT_CTRL                      ((0x318b  << 2) + 0xff900000)
//Bit 31    it true, disable clock, otherwise enable clock
//Bit 30    soft rst bit
//Bit 28    if true, horizontal formatter use repeating to generete pixel, otherwise use bilinear interpolation
//Bit 27:24 horizontal formatter initial phase
//Bit 23    horizontal formatter repeat pixel 0 enable
//Bit 22:21 horizontal Y/C ratio, 00: 1:1, 01: 2:1, 10: 4:1
//Bit 20    horizontal formatter enable
//Bit 19    if true, always use phase0 while vertical formater, meaning always
//          repeat data, no interpolation
//Bit 18    if true, disable vertical formatter chroma repeat last line
//Bit 17    veritcal formatter dont need repeat line on phase0, 1: enable, 0: disable
//Bit 16    veritcal formatter repeat line 0 enable
//Bit 15:12 vertical formatter skip line num at the beginning
//Bit 11:8  vertical formatter initial phase
//Bit 7:1   vertical formatter phase step (3.4)
//Bit 0     vertical formatter enable
#define VD2_AFBC_VD_CFMT_W                         ((0x318c  << 2) + 0xff900000)
//Bit 27:16  horizontal formatter width
//Bit 11:0   vertical formatter width
#define VD2_AFBC_MIF_HOR_SCOPE                     ((0x318d  << 2) + 0xff900000)
//Bit   31:26,   reserved
//Bit   25:16,   mif_blk_bgn_h        uns, default = 0  ; // unit: 32 pixel/block hor
//Bit   15:10,   reserved
//Bit    9: 0,   mif_blk_end_h        uns, default = 59 ; // unit: 32 pixel/block hor
#define VD2_AFBC_MIF_VER_SCOPE                     ((0x318e  << 2) + 0xff900000)
//Bit   31:28,   reserved
//Bit   27:16,   mif_blk_bgn_v        uns, default = 0  ; // unit: 32 pixel/block ver
//Bit   15:12,   reserved
//Bit   11: 0,   mif_blk_end_v        uns, default = 269; // unit: 32 pixel/block ver
#define VD2_AFBC_PIXEL_HOR_SCOPE                   ((0x318f  << 2) + 0xff900000)
//Bit   31:29,   reserved
//Bit   28:16,   dec_pixel_bgn_h        uns, default = 0  ; // unit: pixel
//Bit   15:13,   reserved
//Bit   12: 0,   dec_pixel_end_h        uns, default = 1919 ; // unit: pixel
#define VD2_AFBC_PIXEL_VER_SCOPE                   ((0x3190  << 2) + 0xff900000)
//Bit   31:29,   reserved
//Bit   28:16,   dec_pixel_bgn_v        uns, default = 0  ; // unit: pixel
//Bit   15:13,   reserved
//Bit   12: 0,   dec_pixel_end_v        uns, default = 1079 ; // unit: pixel
#define VD2_AFBC_VD_CFMT_H                         ((0x3191  << 2) + 0xff900000)
//Bit 12:0   vertical formatter height
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  vd2_afbc_dec_regs.h
//
//register definition for osd1 afbcd dec
// 8'ha0-8'haf
//
// Reading file:  osd1_afbcd_regs.h
//
// synopsys translate_off
// synopsys translate_on
////===============================////
//// reg
////===============================////
#define OSD1_AFBCD_ENABLE                          ((0x31a0  << 2) + 0xff900000)
//Bit   31:16,    reserved
//Bit   15:9,     id_fifo_thrd      unsigned  , default = 64, axi id fifo threshold
//Bit   8,        dec_enable        unsigned  , default = 0
//Bit   7:1,      reserved
//Bit   0,        frm_start         unsigned  , default = 0
#define OSD1_AFBCD_MODE                            ((0x31a1  << 2) + 0xff900000)
//Bit   31,       soft_reset              the use as go_field
//Bit   30:29,    reserved
//Bit   28,       axi_reorder_mode        default=0, the axi reorder mode, note : don't seting
//Bit   27:26,    reserved
//Bit   25:24,    mif_urgent              uns, default = 3 , info mif and data mif urgent
//Bit   22:16,    hold_line_num
//Bit   15:8,     rgba_exchan_ctrl
//Bit   7,        reserved
//Bit   6,        hreg_block_split        uns, default = 1 , Enable/disable block split mode in sparse allocation
//Bit   5,        hreg_half_block         uns, default = 1 , Enable/disable half block decoding. 1=half block, 0=full block
//Bit   4:0,      hreg_pixel_packing_fmt  uns, default = 5 , Pixel format
#define OSD1_AFBCD_SIZE_IN                         ((0x31a2  << 2) + 0xff900000)
//Bit   31:16     hreg_hsize_in          uns, default = 1920 , pic horz size in  unit: pixel
//Bit   15:0,     hreg_vsize_in          uns, default = 1080 , pic vert size in  unit: pixel
#define OSD1_AFBCD_HDR_PTR                         ((0x31a3  << 2) + 0xff900000)
//Bit   31:0      hreg_hdr_ptr           uns, default = 0 ,
#define OSD1_AFBCD_FRAME_PTR                       ((0x31a4  << 2) + 0xff900000)
//Bit   31:0      hreg_frame_ptr         uns, default = 0 , The start address of the target frame buffer.
//                                       For YUV format, this pointer specifies the luma buffer.
#define OSD1_AFBCD_CHROMA_PTR                      ((0x31a5  << 2) + 0xff900000)
//Bit   31:0      hreg_chroma_ptr        uns, default = 0 , Only valid in YUV format, to specify the target chroma buffer.
#define OSD1_AFBCD_CONV_CTRL                       ((0x31a6  << 2) + 0xff900000)
//Bit   31:15,   reserved
//Bit   15: 0,   conv_lbuf_len           uns, default = 1024, unit=16 pixel need to set = 2^n
#define OSD1_AFBCD_STATUS                          ((0x31a8  << 2) + 0xff900000)
//Bit   30:4,     reserved
//Bit   3,        hreg_dec_resp          uns, default = 0 , Decoder error flage from the dec4x4 core
//Bit   2,        hreg_axi_bresp         uns, default = 0 , Bus error flag for AXI write error
//Bit   1,        hreg_axi_rresp         uns, default = 0 , Bus error flag for AXI read error
//Bit   0,        hreg_idle_n            uns, default = 0 , Idle output, value 0 indicates the standalone decoder is free now and can start the next frame.
#define OSD1_AFBCD_PIXEL_HSCOPE                    ((0x31a9  << 2) + 0xff900000)
//Bit   31:16,   dec_pixel_bgn_h         uns, default = 0  ; // unit: pixel
//Bit   15: 0,   dec_pixel_end_h         uns, default = 1919 ; // unit: pixel
#define OSD1_AFBCD_PIXEL_VSCOPE                    ((0x31aa  << 2) + 0xff900000)
//Bit   31:16,   dec_pixel_bgn_v         uns, default = 0  ; // unit: pixel
//Bit   15: 0,   dec_pixel_end_v         uns, default = 1079 ; // unit: pixel
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  osd1_afbcd_regs.h
//
//register definition for osd1 afbcd dec
// 8'hb0-8'hca
//
// Reading file:  vpp_wm_regs.h
//
//// synopsys translate_off
//`ifdef VPP_WM_REGS_H
//`else
//    `define VPP_WM_REGS_H
//// synopsys translate_on
//    `define VPPB_VCBUS_BASE                8'h32
#define WM_CTRL                                    ((0x31b0  << 2) + 0xff900000)
//Bit  31,      int_mask					default = 0
//Bit  30:16,	reserved
//Bit  15:8,	strength_multiply			default =1
//Bit  7:6,		reserved
//Bit  5,       shift_en                      default = 0
//Bit  4,		background_embedding_on			default =0
//Bit  3,		mark_en			default =0
//Bit  2,		noise_en			default =0
//Bit  1,		blend_en			default =0
//Bit  0,		wm_en			default =0
#define WM_SPACE_RESOLUTION                        ((0x31b1  << 2) + 0xff900000)
//Bit  31:25,	reserved
//Bit  24:16,	spacing_horz			default =10
//Bit  15:9,    reserved
//Bit  8:0,		spacing_vert			default =12
#define WM_SYMBOLS_NUM                             ((0x31b2  << 2) + 0xff900000)
//Bit  31:8, reserved
//Bit  7:4, symbols_cols		1~10;	default =5
//Bit  3:0, symbols_rows		1~10;	default =2
#define WM_MARK_RESOLUTION                         ((0x31b3  << 2) + 0xff900000)
//Bit  31:20,  mark_hsize		mark_buffer_width;  	default =1820
//Bit  19:8,   mark_vsize		mark_buffer_height; 	default =1820             t =780
//Bit  7:6,		reserved
//Bit  5:0,		scale			default =13                  // scale up
#define WM_FREQ_DIST_LEFT                          ((0x31b4  << 2) + 0xff900000)
//Bit  31:21, reserved
//Bit  20:0, freq_dist_left			default =21092          // frequency_distance [n][0]  each is 7bits, there is 3 dist
#define WM_FREQ_DIST_RIGHT                         ((0x31b5  << 2) + 0xff900000)
//Bit  31:21, reserved
//Bit  20:0, freq_dist_right			default =21092          // frequency_distance [n][0]  each is 7bits, there is 3 dist
#define WM_FREQ_DIST_TOP                           ((0x31b6  << 2) + 0xff900000)
//Bit  31:21, reserved
//Bit  20:0, freq_dist_top			default =21092          // frequency_distance [n][0]  each is 7bits, there is 3 dist
#define WM_SYMBOLS_XPOS                            ((0x31b7  << 2) + 0xff900000)
//Bit  31:29, reserved
//Bit  28:16, symbols_xpos_start			default =1536      // SYMBOLS_XPOS * h_res
//Bit  15:13, reserved
//Bit  12:0,  symbols_xpos_end			default =3356        // SYMBOLS_XPOS * h_res + mark_hsize
#define WM_SYMBOLS_YPOS                            ((0x31b8  << 2) + 0xff900000)
//Bit  31:29, reserved
//Bit  28:16, symbols_ypos_start			default =756      // SYMBOLS_yPOS * y_res
//Bit  15:13, reserved
//Bit  12:0,  symbols_ypos_end			    default =1536        // SYMBOLS_yPOS * y_res + mark_vsize
#define WM_STORAGE_SETTING                         ((0x31b9  << 2) + 0xff900000)
//Bit  31:28, reserved
//Bit  27:16, direction_max		default = 80
//Bit	  15, reserved
//Bit   14:8, storage_s			default =18               // biggest is 72      S
//Bit      7, reserved
//Bit    6:0, storage_max_distance			default =36    // biggest is 72      max_distance
#define WM_VIDEO_RESOLUTION                        ((0x31ba  << 2) + 0xff900000)
//Bit  31:29, reserved
//Bit  28:16, h_res			default =3840                   // video hsize
//Bit  15:13, reserved
//Bit  12:0,  v_res			default =2160                   // video vsize
#define WM_EMBEDDING_STRENGTH_THRESHOLD0           ((0x31bb  << 2) + 0xff900000)
//Bit  31:28, reserved
//Bit  27:16, embedding_strength_threshold_0		default =48
//Bit  15:12, reserved
//Bit  11:0,  embedding_strength_threshold_1		default =60
#define WM_EMBEDDING_STRENGTH_THRESHOLD1           ((0x31bc  << 2) + 0xff900000)
//Bit  31:28, reserved
//Bit  27:16, embedding_strength_threshold_2		default = 68
//Bit  15:12, reserved
//Bit  11:0,  embedding_strength_threshold_3		default = 80
#define WM_EMBEDDING_STRENGTH_THRESHOLD2           ((0x31bd  << 2) + 0xff900000)
//Bit  31:28, reserved
//Bit  27:16, embedding_strength_threshold_4		default = 88
//Bit  15:12, reserved
//Bit  11:0,  embedding_strength_threshold_5		default = 96
#define WM_EMBEDDING_STRENGTH_THRESHOLD3           ((0x31be  << 2) + 0xff900000)
//Bit  31:28, reserved
//Bit  27:16, embedding_strength_threshold_6		default = 100
//Bit  15:12, reserved
//Bit  11:0,  embedding_strength_threshold_7		default = 108
#define WM_EMBEDDING_STRENGTH_THRESHOLD4           ((0x31bf  << 2) + 0xff900000)
//Bit  31:28, reserved
//Bit  27:16, embedding_strength_threshold_8		default = 112
//Bit  15:12, reserved
//Bit  11:0,  embedding_strength_threshold_9		default = 116
#define WM_EMBEDDING_STRENGTH_THRESHOLD5           ((0x31c0  << 2) + 0xff900000)
//Bit  31:28, reserved
//Bit  27:16, embedding_strength_threshold_10		default = 120
//Bit  15:12, reserved
//Bit  11:0,  embedding_strength_threshold_11		default = 124
#define WM_EMBEDDING_STRENGTH_THRESHOLD_BG0        ((0x31c1  << 2) + 0xff900000)
//Bit  31:28, reserved
//Bit  27:16, embedding_strength_threshold_bg_0		default =320
//Bit  15:12, reserved
//Bit  11:0,  embedding_strength_threshold_bg_1		default = 328
#define WM_EMBEDDING_STRENGTH_THRESHOLD_BG1        ((0x31c2  << 2) + 0xff900000)
//Bit  31:28, reserved
//Bit  27:16, embedding_strength_threshold_bg_2		default = 332
//Bit  15:12, reserved
//Bit  11:0,  embedding_strength_threshold_bg_3		default = 340
#define WM_EMBEDDING_STRENGTH_THRESHOLD_BG2        ((0x31c3  << 2) + 0xff900000)
//Bit  31:28, reserved
//Bit  27:16, embedding_strength_threshold_bg_4		default = 344
//Bit  15:12, reserved
//Bit  11:0,  embedding_strength_threshold_bg_5		default = 348
#define WM_EMBEDDING_STRENGTH_THRESHOLD_BG3        ((0x31c4  << 2) + 0xff900000)
//Bit  31:28, reserved
//Bit  27:16, embedding_strength_threshold_bg_6		default = 352
//Bit  15:12, reserved
//Bit  11:0,  embedding_strength_threshold_bg_7		default = 356
#define WM_EMBEDDING_STRENGTH_THRESHOLD_BG4        ((0x31c5  << 2) + 0xff900000)
//Bit  31:28, reserved
//Bit  27:16, embedding_strength_threshold_bg_8		default = 360
//Bit  15:12, reserved
//Bit  11:0,  embedding_strength_threshold_bg_9		default = 368
#define WM_EMBEDDING_STRENGTH_THRESHOLD_BG5        ((0x31c6  << 2) + 0xff900000)
//Bit  31:28, reserved
//Bit  27:16, embedding_strength_threshold_bg_10		default = 372
//Bit  15:12, reserved
//Bit  11:0,  embedding_strength_threshold_bg_11		default = 380
#define WM_AM_LUT_DATA_PORT                        ((0x31c7  << 2) + 0xff900000)
#define WM_AM_LUT_ADDR_PORT                        ((0x31c8  << 2) + 0xff900000)
#define WM_STATUS_RO                               ((0x31c9  << 2) + 0xff900000)
//Bit  31,  ro_resolution_changed
//Bit  30:29, reserved
//Bit  30:16, ro_hsize_in
//Bit  15:13, reserved
//Bit  8:0,   ro_vsize_in
#define WM_STATUS_RAM_RO                           ((0x31ca  << 2) + 0xff900000)
//Bit  31:9,  reserved
//Bit  8:0,   ro_ram_addr
#define WM_THRES_ADDR_PORT                         ((0x31cb  << 2) + 0xff900000)
#define WM_THRES_DATA_PORT                         ((0x31cd  << 2) + 0xff900000)
//
// Closing file:  vpp_wm_regs.h
//
// 8'hd0-8hef
//
// Reading file:  bt2020_regs.h
//
// synopsys translate_off
// synopsys translate_on
//    `define XVYCC_VCBUS_BASE	   8'hfe
//Bit 31:27 for all [31] for all eotf enable,[30] for matrix3x3 enable, [29:27] for eotf_ch0~3
//Bit 17:6  for clock gating
//Bit 5:4   pscale_mode ch2
//Bit 3:2   pscale_mode ch1
//Bit 1:0   pscale_mode ch0
#define VPP_EOTF_CTL                               ((0x31d0  << 2) + 0xff900000)
//Bit 28:16 coef00
//Bit 12:0  coef01
#define VPP_EOTF_COEF00_01                         ((0x31d1  << 2) + 0xff900000)
//Bit 28:16 coef02
//Bit 12:0  coef10
#define VPP_EOTF_COEF02_10                         ((0x31d2  << 2) + 0xff900000)
//Bit 28:16 coef11
//Bit 12:0  coef12
#define VPP_EOTF_COEF11_12                         ((0x31d3  << 2) + 0xff900000)
//Bit 28:16 coef20
//Bit 12:0  coef21
#define VPP_EOTF_COEF20_21                         ((0x31d4  << 2) + 0xff900000)
//Bit 28:16 coef22
//Bit   2:0 coef_rs
#define VPP_EOTF_COEF22_RS                         ((0x31d5  << 2) + 0xff900000)
#define VPP_EOTF_LUT_ADDR_PORT                     ((0x31d6  << 2) + 0xff900000)
#define VPP_EOTF_LUT_DATA_PORT                     ((0x31d7  << 2) + 0xff900000)
#define VPP_EOTF_3X3_OFST_0                        ((0x31d8  << 2) + 0xff900000)
#define VPP_EOTF_3X3_OFST_1                        ((0x31d9  << 2) + 0xff900000)
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  bt2020_regs.h
//
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  srscl_reg.h
//
// -----------------------------------------------
// CBUS_BASE:  VPPC_VCBUS_BASE = 0x32
// -----------------------------------------------
//
// Reading file:  srsharp_regs.h
//
// synopsys translate_off
// synopsys translate_on
// `define  VPPB_VCBUS_BASE   8'h31
//VDIN0        8'h00 - 8'h7f
//VDIN1        8'h80 - 8'hef
#define  SRSHARP0_OFFSET   (0x00<<2)
#define  SRSHARP1_OFFSET   (0x80<<2)

//
// Reading file:  sharp_regs.h
//
#define SHARP_HVSIZE                               ((0x3200  << 2) + 0xff900000)
//Bit 31:29,        reserved
//Bit 28:16,        reg_pknr_hsize                                                                                                              . unsigned  , default = 1920
//Bit 15:13,        reserved
//Bit 12: 0,        reg_pknr_vsize                                                                                                              . unsigned  , default = 1080
#define SHARP_HVBLANK_NUM                          ((0x3201  << 2) + 0xff900000)
//Bit 31:16,        reserved
//Bit 15: 8,        reg_pknr_hblank_num                                                                                                         . unsigned  , default = 20
//Bit  7: 0,        reg_pknr_vblank_num                                                                                                         . unsigned  , default = 73
#define NR_GAUSSIAN_MODE                           ((0x3202  << 2) + 0xff900000)
//Bit 31: 5,        reserved
//Bit  4,            reg_nr_gau_ymode                            : 0 3x3 filter; 1: 5x5 filter                                                   . unsigned  , default = 1
//Bit  3: 1,        reserved
//Bit  0,            reg_nr_gau_cmode                            : 0 3x3 filter; 1: 5x5 filter                                                   . unsigned  , default = 1
#define PK_CON_2CIRHPGAIN_TH_RATE                  ((0x3205  << 2) + 0xff900000)
//Bit 31:24,        reg_pk_cirhpcon2gain0                       : threshold0 of curve to map hpcon to hpgain for circle hp filter (all 8 direction same). 0~255.. unsigned  , default = 25
//Bit 23:16,        reg_pk_cirhpcon2gain1                       : threshold1 of curve to map hpcon to hpgain for circle hp filter (all 8 direction same). 0~255.. unsigned  , default = 60
//Bit 15: 8,        reg_pk_cirhpcon2gain5                       : rate0 (for hpcon<th0) of curve to map hpcon to hpgain for circle hp filter (all 8 direction same). 0~255.. unsigned  , default = 80
//Bit  7: 0,        reg_pk_cirhpcon2gain6                       : rate1 (for hpcon>th1) of curve to map hpcon to hpgain for circle hp filter (all 8 direction same). 0~255.. unsigned  , default = 20
#define PK_CON_2CIRHPGAIN_LIMIT                    ((0x3206  << 2) + 0xff900000)
//Bit 31:24,        reg_pk_cirhpcon2gain2                       : level limit(for hpcon<th0) of curve to map hpcon to hpgain for circle hp filter (all 8 direction same). 0~255.. unsigned  , default = 155
//Bit 23:16,        reg_pk_cirhpcon2gain3                       : level limit(for th0<hpcon<th1) of curve to map hpcon to hpgain for circle hp filter (all 8 direction same). 0~255.. unsigned  , default = 150
//Bit 15: 8,        reg_pk_cirhpcon2gain4                       : level limit(for hpcon>th1) of curve to map hpcon to hpgain for circle hp filter (all 8 direction same). 0~255.. unsigned  , default = 5
//Bit  7: 0,        reserved
#define PK_CON_2CIRBPGAIN_TH_RATE                  ((0x3207  << 2) + 0xff900000)
//Bit 31:24,        reg_pk_cirbpcon2gain0                       : threshold0 of curve to map bpcon to bpgain for circle bp filter (all 8 direction same). 0~255.. unsigned  , default = 20
//Bit 23:16,        reg_pk_cirbpcon2gain1                       : threshold1 of curve to map bpcon to bpgain for circle bp filter (all 8 direction same).. unsigned  , default = 50
//Bit 15: 8,        reg_pk_cirbpcon2gain5                       : rate0 (for bpcon<th0) of curve to map bpcon to bpgain for circle bp filter (all 8 direction same). 0~255.. unsigned  , default = 50
//Bit  7: 0,        reg_pk_cirbpcon2gain6                       : rate1 (for bpcon>th1) of curve to map bpcon to bpgain for circle bp filter (all 8 direction same). 0~255.. unsigned  , default = 25
#define PK_CON_2CIRBPGAIN_LIMIT                    ((0x3208  << 2) + 0xff900000)
//Bit 31:24,        reg_pk_cirbpcon2gain2                       : level limit(for bpcon<th0) of curve to map bpcon to bpgain for circle bp filter (all 8 direction same). 0~255.. unsigned  , default = 155
//Bit 23:16,        reg_pk_cirbpcon2gain3                       : level limit(for th0<bpcon<th1) of curve to map bpcon to bpgain for circle bp filter (all 8 direction same). 0~255.. unsigned  , default = 150
//Bit 15: 8,        reg_pk_cirbpcon2gain4                       : level limit(for bpcon>th1) of curve to map bpcon to bpgain for circle bp filter (all 8 direction same). 0~255.. unsigned  , default = 5
//Bit  7: 0,        reserved
#define PK_CON_2DRTHPGAIN_TH_RATE                  ((0x3209  << 2) + 0xff900000)
//Bit 31:24,        reg_pk_drthpcon2gain0                       : threshold0 of curve to map hpcon to hpgain for directional hp filter (best direction). 0~255.. unsigned  , default = 25
//Bit 23:16,        reg_pk_drthpcon2gain1                       : threshold1 of curve to map hpcon to hpgain for directional hp filter (best direction). 0~255.. unsigned  , default = 60
//Bit 15: 8,        reg_pk_drthpcon2gain5                       : rate0 (for hpcon<th0) of curve to map hpcon to hpgain for directional hp filter (best direction). 0~255.. unsigned  , default = 80
//Bit  7: 0,        reg_pk_drthpcon2gain6                       : rate1 (for hpcon>th1) of curve to map hpcon to hpgain for directional hp filter (best direction). 0~255.. unsigned  , default = 20
#define PK_CON_2DRTHPGAIN_LIMIT                    ((0x320a  << 2) + 0xff900000)
//Bit 31:24,        reg_pk_drthpcon2gain2                       : level limit(for hpcon<th0) of curve to map hpcon to hpgain for directional hp filter (best direction).. unsigned  , default = 105
//Bit 23:16,        reg_pk_drthpcon2gain3                       : level limit(for th0<hpcon<th1) of curve to map hpcon to hpgain for directional hp filter (best direction). 0~255.. unsigned  , default = 96
//Bit 15: 8,        reg_pk_drthpcon2gain4                       : level limit(for hpcon>th1) of curve to map hpcon to hpgain for directional hp filter (best direction). 0~255.. unsigned  , default = 5
//Bit  7: 0,        reserved
#define PK_CON_2DRTBPGAIN_TH_RATE                  ((0x320b  << 2) + 0xff900000)
//Bit 31:24,        reg_pk_drtbpcon2gain0                       : threshold0 of curve to map bpcon to bpgain for directional bp filter (best direction). 0~255.. unsigned  , default = 20
//Bit 23:16,        reg_pk_drtbpcon2gain1                       : threshold1 of curve to map bpcon to bpgain for directional bp filter (best direction). 0~255.. unsigned  , default = 50
//Bit 15: 8,        reg_pk_drtbpcon2gain5                       : rate0 (for bpcon<th0) of curve to map bpcon to bpgain for directional bp filter (best direction). 0~255.. unsigned  , default = 50
//Bit  7: 0,        reg_pk_drtbpcon2gain6                       : rate1 (for bpcon>th1) of curve to map bpcon to bpgain for directional bp filter (best direction). 0~255.. unsigned  , default = 25
#define PK_CON_2DRTBPGAIN_LIMIT                    ((0x320c  << 2) + 0xff900000)
//Bit 31:24,        reg_pk_drtbpcon2gain2                       : level limit(for bpcon<th0) of curve to map bpcon to bpgain for directional bp filter (best direction). 0~255.. unsigned  , default = 55
//Bit 23:16,        reg_pk_drtbpcon2gain3                       : level limit(for th0<bpcon<th1) of curve to map bpcon to bpgain for directional bp filter (best direction). 0~255.. unsigned  , default = 40
//Bit 15: 8,        reg_pk_drtbpcon2gain4                       : level limit(for bpcon>th1) of curve to map bpcon to bpgain for directional bp filter (best direction). 0~255.. unsigned  , default = 5
//Bit  7: 0,        reserved
#define PK_CIRFB_LPF_MODE                          ((0x320d  << 2) + 0xff900000)
//Bit 31:30,        reserved
//Bit 29:28,        reg_cirhp_horz_mode                         : no horz filter on HP; 1: [1 2 1]/4; 2/3: [1 2 2 2 1]/8                        . unsigned  , default = 1
//Bit 27:26,        reserved
//Bit 25:24,        reg_cirhp_vert_mode                         : no vert filter on HP; 1: [1 2 1]/4; 2/3: [1 2 2 2 1]/8                        . unsigned  , default = 1
//Bit 23:22,        reserved
//Bit 21:20,        reg_cirhp_diag_mode                         : filter on HP; 1: [1 2 1]/4;                                                   . unsigned  , default = 1
//Bit 19:14,        reserved
//Bit 13:12,        reg_cirbp_horz_mode                         : no horz filter on BP; 1: [1 2 1]/4; 2/3: [1 2 2 2 1]/8                        . unsigned  , default = 1
//Bit 11:10,        reserved
//Bit  9: 8,        reg_cirbp_vert_mode                         : no vert filter on BP; 1: [1 2 1]/4; 2/3: [1 2 2 2 1]/8                        . unsigned  , default = 1
//Bit  7: 6,        reserved
//Bit  5: 4,        reg_cirbp_diag_mode                         : filter on BP; 1: [1 2 1]/4;                                                   . unsigned  , default = 1
//Bit  3: 0,        reserved
#define PK_DRTFB_LPF_MODE                          ((0x320e  << 2) + 0xff900000)
//Bit 31:30,        reserved
//Bit 29:28,        reg_drthp_horz_mode                         : no horz filter on HP; 1: [1 2 1]/4; 2/3: [1 2 2 2 1]/8  2                     . unsigned  , default = 1
//Bit 27:26,        reserved
//Bit 25:24,        reg_drthp_vert_mode                         : no vert filter on HP; 1: [1 2 1]/4; 2/3: [1 2 2 2 1]/8  2                     . unsigned  , default = 1
//Bit 23:22,        reserved
//Bit 21:20,        reg_drthp_diag_mode                         : filter on HP; 1: [1 2 1]/4;                             1                     . unsigned  , default = 1
//Bit 19:14,        reserved
//Bit 13:12,        reg_drtbp_horz_mode                         : no horz filter on BP; 1: [1 2 1]/4; 2/3: [1 2 2 2 1]/8  2                     . unsigned  , default = 1
//Bit 11:10,        reserved
//Bit  9: 8,        reg_drtbp_vert_mode                         : no vert filter on BP; 1: [1 2 1]/4; 2/3: [1 2 2 2 1]/8  2                     . unsigned  , default = 1
//Bit  7: 6,        reserved
//Bit  5: 4,        reg_drtbp_diag_mode                         : filter on BP; 1: [1 2 1]/4;                             1                     . unsigned  , default = 1
//Bit  3: 0,        reserved
#define PK_CIRFB_HP_CORING                         ((0x320f  << 2) + 0xff900000)
//Bit 31:22,        reserved
//Bit 21:16,        reg_cirhp_horz_core                         : coring of HP for Horz                                                         . unsigned  , default = 0
//Bit 15:14,        reserved
//Bit 13: 8,        reg_cirhp_vert_core                         : coring of HP for Vert                                                         . unsigned  , default = 0
//Bit  7: 6,        reserved
//Bit  5: 0,        reg_cirhp_diag_core                         : coring of HP for Diag                                                         . unsigned  , default = 0
#define PK_CIRFB_BP_CORING                         ((0x3210  << 2) + 0xff900000)
//Bit 31:22,        reserved
//Bit 21:16,        reg_cirbp_horz_core                         : coring of HP for Horz                                                         . unsigned  , default = 1
//Bit 15:14,        reserved
//Bit 13: 8,        reg_cirbp_vert_core                         : coring of HP for Vert                                                         . unsigned  , default = 1
//Bit  7: 6,        reserved
//Bit  5: 0,        reg_cirbp_diag_core                         : coring of HP for Diag                                                         . unsigned  , default = 1
#define PK_DRTFB_HP_CORING                         ((0x3211  << 2) + 0xff900000)
//Bit 31:22,        reserved
//Bit 21:16,        reg_drthp_horz_core                         : coring of HP for Horz                                                         . unsigned  , default = 1
//Bit 15:14,        reserved
//Bit 13: 8,        reg_drthp_vert_core                         : coring of HP for Vert                                                         . unsigned  , default = 1
//Bit  7: 6,        reserved
//Bit  5: 0,        reg_drthp_diag_core                         : coring of HP for Diag                                                         . unsigned  , default = 1
#define PK_DRTFB_BP_CORING                         ((0x3212  << 2) + 0xff900000)
//Bit 31:22,        reserved
//Bit 21:16,        reg_drtbp_horz_core                         : coring of HP for Horz                                                         . unsigned  , default = 1
//Bit 15:14,        reserved
//Bit 13: 8,        reg_drtbp_vert_core                         : coring of HP for Vert                                                         . unsigned  , default = 1
//Bit  7: 6,        reserved
//Bit  5: 0,        reg_drtbp_diag_core                         : coring of HP for Diag                                                         . unsigned  , default = 1
#define PK_CIRFB_BLEND_GAIN                        ((0x3213  << 2) + 0xff900000)
//Bit 31:28,        reg_hp_cir_hgain                            : normalized 8 as '1'                                                           . unsigned  , default = 8
//Bit 27:24,        reg_hp_cir_vgain                            : normalized 8 as '1'                                                           . unsigned  , default = 8
//Bit 23:20,        reg_hp_cir_dgain                            : normalized 8 as '1'                                                           . unsigned  , default = 8
//Bit 19:16,        reserved
//Bit 15:12,        reg_bp_cir_hgain                            : normalized 8 as '1'                                                           . unsigned  , default = 8
//Bit 11: 8,        reg_bp_cir_vgain                            : normalized 8 as '1'                                                           . unsigned  , default = 8
//Bit  7: 4,        reg_bp_cir_dgain                            : normalized 8 as '1'                                                           . unsigned  , default = 8
//Bit  3: 0,        reserved
#define NR_ALPY_SSD_GAIN_OFST                      ((0x3214  << 2) + 0xff900000)
//Bit 31:16,        reserved
//Bit 15: 8,        reg_nr_alp0_ssd_gain                        : gain to max ssd normalized 16 as '1'                                          . unsigned  , default = 16
//Bit  7: 6,        reserved
//Bit  5: 0,        reg_nr_alp0_ssd_ofst                        : offset to ssd before dividing to min_err                                      . signed    , default = -2
#define NR_ALP0Y_ERR2CURV_TH_RATE                  ((0x3215  << 2) + 0xff900000)
//Bit 31:24,        reg_nr_alp0_minerr_ypar0                    : threshold0 of curve to map mierr to alp0 for luma channel, this will be set value of flat region mierr that no need blur. 0~255.. unsigned  , default = 10
//Bit 23:16,        reg_nr_alp0_minerr_ypar1                    : threshold1 of curve to map mierr to alp0 for luma channel,this will be set value of texture region mierr that can not blur.. unsigned  , default = 25
//Bit 15: 8,        reg_nr_alp0_minerr_ypar5                    : rate0 (for mierr<th0) of curve to map mierr to alp0 for luma channel. the larger of the value, the deep of the slope. 0~255.. unsigned  , default = 80
//Bit  7: 0,        reg_nr_alp0_minerr_ypar6                    : rate1 (for mierr>th1) of curve to map mierr to alp0 for luma channel. the larger of the value, the deep of the slope. 0~255.. unsigned  , default = 64
#define NR_ALP0Y_ERR2CURV_LIMIT                    ((0x3216  << 2) + 0xff900000)
//Bit 31:24,        reg_nr_alp0_minerr_ypar2                    : level limit(for mierr<th0) of curve to map mierr to alp0 for luma channel, this will be set to alp0 that we can do for flat region. 0~255.. unsigned  , default = 63
//Bit 23:16,        reg_nr_alp0_minerr_ypar3                    : level limit(for th0<mierr<th1) of curve to map mierr to alp0 for luma channel, this will be set to alp0 that we can do for misc region. 0~255.. unsigned  , default = 0
//Bit 15: 8,        reg_nr_alp0_minerr_ypar4                    : level limit(for mierr>th1) of curve to map mierr to alp0 for luma channel, this will be set to alp0 that we can do for texture region. 0~255.. unsigned  , default = 63
//Bit  7: 0,        reserved
#define NR_ALP0C_ERR2CURV_TH_RATE                  ((0x3217  << 2) + 0xff900000)
//Bit 31:24,        reg_nr_alp0_minerr_cpar0                    : threshold0 of curve to map mierr to alp0 for chroma channel, this will be set value of flat region mierr that no need blur.. unsigned  , default = 10
//Bit 23:16,        reg_nr_alp0_minerr_cpar1                    : threshold1 of curve to map mierr to alp0 for chroma channel,this will be set value of texture region mierr that can not blur.. unsigned  , default = 25
//Bit 15: 8,        reg_nr_alp0_minerr_cpar5                    : rate0 (for mierr<th0) of curve to map mierr to alp0 for chroma channel. the larger of the value, the deep of the slope. 0~255.. unsigned  , default = 80
//Bit  7: 0,        reg_nr_alp0_minerr_cpar6                    : rate1 (for mierr>th1) of curve to map mierr to alp0 for chroma channel. the larger of the value, the deep of the slope. 0~255.. unsigned  , default = 64
#define NR_ALP0C_ERR2CURV_LIMIT                    ((0x3218  << 2) + 0xff900000)
//Bit 31:24,        reg_nr_alp0_minerr_cpar2                    : level limit(for mierr<th0) of curve to map mierr to alp0 for chroma channel, this will be set to alp0 that we can do for flat region. 0~255.. unsigned  , default = 63
//Bit 23:16,        reg_nr_alp0_minerr_cpar3                    : level limit(for th0<mierr<th1) of curve to map mierr to alp0 for chroma channel, this will be set to alp0 that we can do for misc region. 0~255.. unsigned  , default = 0
//Bit 15: 8,        reg_nr_alp0_minerr_cpar4                    : level limit(for mierr>th1) of curve to map mierr to alp0 for chroma channel, this will be set to alp0 that we can do for texture region. 0~255.. unsigned  , default = 63
//Bit  7: 0,        reserved
#define NR_ALP0_MIN_MAX                            ((0x3219  << 2) + 0xff900000)
//Bit 31:30,        reserved
//Bit 29:24,        reg_nr_alp0_ymin                            : normalized to 64 as '1'                                                       . unsigned  , default = 0
//Bit 23:22,        reserved
//Bit 21:16,        reg_nr_alp0_ymax                            : normalized to 64 as '1'                                                       . unsigned  , default = 63
//Bit 15:14,        reserved
//Bit 13: 8,        reg_nr_alp0_cmin                            : normalized to 64 as '1'                                                       . unsigned  , default = 0
//Bit  7: 6,        reserved
//Bit  5: 0,        reg_nr_alp0_cmax                            : normalized to 64 as '1'                                                       . unsigned  , default = 63
#define NR_ALP1_MIERR_CORING                       ((0x321a  << 2) + 0xff900000)
//Bit 31:17,        reserved
//Bit 16,            reg_nr_alp1_maxerr_mode                     : 0 max err; 1: xerr                                                            . unsigned  , default = 0
//Bit 15:14,        reserved
//Bit 13: 8,        reg_nr_alp1_core_rate                       : normalized 64 as "1"                                                          . unsigned  , default = 0
//Bit  7: 6,        reserved
//Bit  5: 0,        reg_nr_alp1_core_ofst                       : normalized 64 as "1"                                                          . signed    , default = 3
#define NR_ALP1_ERR2CURV_TH_RATE                   ((0x321b  << 2) + 0xff900000)
//Bit 31:24,        reg_nr_alp1_minerr_par0                     : threshold0 of curve to map mierr to alp1 for luma/chroma channel, this will be set value of flat region mierr that no need directional NR. 0~255.. unsigned  , default = 0
//Bit 23:16,        reg_nr_alp1_minerr_par1                     : threshold1 of curve to map mierr to alp1 for luma/chroma  channel,this will be set value of texture region mierr that can not do directional NR. 0~255.. unsigned  , default = 24
//Bit 15: 8,        reg_nr_alp1_minerr_par5                     : rate0 (for mierr<th0) of curve to map mierr to alp1 for luma/chroma  channel. the larger of the value, the deep of the slope.. unsigned  , default = 0
//Bit  7: 0,        reg_nr_alp1_minerr_par6                     : rate1 (for mierr>th1) of curve to map mierr to alp1 for luma/chroma  channel. the larger of the value, the deep of the slope. 0~255. unsigned  , default = 20
#define NR_ALP1_ERR2CURV_LIMIT                     ((0x321c  << 2) + 0xff900000)
//Bit 31:24,        reg_nr_alp1_minerr_par2                     : level limit(for mierr<th0) of curve to map mierr to alp1 for luma/chroma  channel, this will be set to alp1 that we can do for flat region. 0~255.. unsigned  , default = 0
//Bit 23:16,        reg_nr_alp1_minerr_par3                     : level limit(for th0<mierr<th1) of curve to map mierr to alp1 for luma/chroma  channel, this will be set to alp1 that we can do for misc region. 0~255.. unsigned  , default = 16
//Bit 15: 8,        reg_nr_alp1_minerr_par4                     : level limit(for mierr>th1) of curve to map mierr to alp1 for luma/chroma  channel, this will be set to alp1 that we can do for texture region. 0~255.255 before. unsigned  , default = 63
//Bit  7: 0,        reserved
#define NR_ALP1_MIN_MAX                            ((0x321d  << 2) + 0xff900000)
//Bit 31:30,        reserved
//Bit 29:24,        reg_nr_alp1_ymin                            : normalized to 64 as '1'                                                       . unsigned  , default = 0
//Bit 23:22,        reserved
//Bit 21:16,        reg_nr_alp1_ymax                            : normalized to 64 as '1'                                                       . unsigned  , default = 63
//Bit 15:14,        reserved
//Bit 13: 8,        reg_nr_alp1_cmin                            : normalized to 64 as '1'                                                       . unsigned  , default = 0
//Bit  7: 6,        reserved
//Bit  5: 0,        reg_nr_alp1_cmax                            : normalized to 64 as '1'                                                       . unsigned  , default = 63
#define PK_ALP2_MIERR_CORING                       ((0x321e  << 2) + 0xff900000)
//Bit 31:17,        reserved
//Bit 16,            reg_pk_alp2_maxerr_mode                     : 0 max err; 1: xerr                                                            . unsigned  , default = 1
//Bit 15:14,        reserved
//Bit 13: 8,        reg_pk_alp2_core_rate                       : normalized 64 as "1"                                                          . unsigned  , default = 0
//Bit  7: 6,        reserved
//Bit  5: 0,        reg_pk_alp2_core_ofst                       : normalized 64 as "1"                                                          . signed    , default = 1
#define PK_ALP2_ERR2CURV_TH_RATE                   ((0x321f  << 2) + 0xff900000)
//Bit 31:24,        reg_pk_alp2_minerr_par0                     : threshold0 of curve to map mierr to alp2 for luma channel, this will be set value of flat region mierr that no need peaking.. unsigned  , default = 0
//Bit 23:16,        reg_pk_alp2_minerr_par1                     : threshold1 of curve to map mierr to alp2 for luma  channel,this will be set value of texture region mierr that can not do peaking. 0~255.. unsigned  , default = 24
//Bit 15: 8,        reg_pk_alp2_minerr_par5                     : rate0 (for mierr<th0) of curve to map mierr to alp2 for luma  channel. the larger of the value, the deep of the slope. 0~255.. unsigned  , default = 0
//Bit  7: 0,        reg_pk_alp2_minerr_par6                     : rate1 (for mierr>th1) of curve to map mierr to alp2 for luma  channel. the larger of the value, the deep of the slope. 0~255.. unsigned  , default = 20
#define PK_ALP2_ERR2CURV_LIMIT                     ((0x3220  << 2) + 0xff900000)
//Bit 31:24,        reg_pk_alp2_minerr_par2                     : level limit(for mierr<th0) of curve to map mierr to alp2 for luma  channel, this will be set to alp2 that we can do for flat region. 0~255.. unsigned  , default = 0
//Bit 23:16,        reg_pk_alp2_minerr_par3                     : level limit(for th0<mierr<th1) of curve to map mierr to alp2 for luma  channel, this will be set to alp2 that we can do for misc region. 0~255.. unsigned  , default = 16
//Bit 15: 8,        reg_pk_alp2_minerr_par4                     : level limit(for mierr>th1) of curve to map mierr to alp2 for luma  channel, this will be set to alp2 that we can do for texture region. 0~255. default = 32;. unsigned  , default = 32
//Bit  7: 0,        reserved
#define PK_ALP2_MIN_MAX                            ((0x3221  << 2) + 0xff900000)
//Bit 31:14,        reserved
//Bit 13: 8,        reg_pk_alp2_min                             : normalized to 64 as '1'                                                       . unsigned  , default = 0
//Bit  7: 6,        reserved
//Bit  5: 0,        reg_pk_alp2_max                             : normalized to 64 as '1'                                                       . unsigned  , default = 63
#define PK_FINALGAIN_HP_BP                         ((0x3222  << 2) + 0xff900000)
//Bit 31:18,        reserved
//Bit 17:16,        reg_final_gain_rs                           : s2: right shift bits for the gain normalization, 0 normal to 32 as 1; 1 normalize to 64 as 1; -2 normalized to 8 as 1; -1 normalize 16 as 1. default = 0
//Bit 15: 8,        reg_hp_final_gain                           : gain to highpass boost result (including directional/circle blending), normalized 32 as '1', 0~255. 1.25 * 32. unsigned  , default = 40
//Bit  7: 0,        reg_bp_final_gain                           : gain to bandpass boost result (including directional/circle blending), normalized 32 as '1', 0~255. 1.25 * 32. unsigned  , default = 30
#define PK_OS_HORZ_CORE_GAIN                       ((0x3223  << 2) + 0xff900000)
//Bit 31:24,        reg_pk_os_hsidecore                         : side coring (not to current pixel) to adaptive overshoot margin in horizontal direction. the larger of this value, the less overshoot admitted 0~255;. unsigned  , default = 8
//Bit 23:16,        reg_pk_os_hsidegain                         : side gain (not to current pixel) to adaptive overshoot margin in horizontal direction. normalized to 32 as '1'. 0~255;. unsigned  , default = 20
//Bit 15: 8,        reg_pk_os_hmidcore                          : midd coring (to current pixel) to adaptive overshoot margin in horizontal direction. the larger of this value, the less overshoot admitted 0~255;. unsigned  , default = 2
//Bit  7: 0,        reg_pk_os_hmidgain                          : midd gain (to current pixel) to adaptive overshoot margin in horizontal direction. normalized to 32 as '1'. 0~255;. unsigned  , default = 20
#define PK_OS_VERT_CORE_GAIN                       ((0x3224  << 2) + 0xff900000)
//Bit 31:24,        reg_pk_os_vsidecore                         : side coring (not to current pixel) to adaptive overshoot margin in vertical direction. the larger of this value, the less overshoot admitted 0~255;. unsigned  , default = 8
//Bit 23:16,        reg_pk_os_vsidegain                         : side gain (not to current pixel) to adaptive overshoot margin in vertical direction. normalized to 32 as '1'. 0~255;. unsigned  , default = 20
//Bit 15: 8,        reg_pk_os_vmidcore                          : midd coring (to current pixel) to adaptive overshoot margin in vertical direction. the larger of this value, the less overshoot admitted 0~255;. unsigned  , default = 2
//Bit  7: 0,        reg_pk_os_vmidgain                          : midd gain (to current pixel) to adaptive overshoot margin in vertical direction. normalized to 32 as '1'. 0~255;. unsigned  , default = 20
#define PK_OS_ADPT_MISC                            ((0x3225  << 2) + 0xff900000)
//Bit 31:24,        reg_pk_os_minerr_core                       : coring to minerr for adaptive overshoot margin. the larger of this value, the less overshoot admitted 0~255;. unsigned  , default = 40
//Bit 23:16,        reg_pk_os_minerr_gain                       : gain to minerr based adaptive overshoot margin. normalized to 64 as '1'. 0~255;. unsigned  , default = 6
//Bit 15: 8,        reg_pk_os_adpt_max                          : maximum limit adaptive overshoot margin (4x). 0~255;                          . unsigned  , default = 200
//Bit  7: 0,        reg_pk_os_adpt_min                          : minimun limit adaptive overshoot margin (1x). 0~255;                          . unsigned  , default = 20
#define PK_OS_STATIC                               ((0x3226  << 2) + 0xff900000)
//Bit 31:30,        reserved
//Bit 29:28,        reg_pk_osh_mode                             : 0~3: (2x+1) window in H direction                                             . unsigned  , default = 2
//Bit 27:26,        reserved
//Bit 25:24,        reg_pk_osv_mode                             : 0~3: (2x+1) window in V direction                                             . unsigned  , default = 2
//Bit 23:22,        reserved
//Bit 21:12,        reg_pk_os_down                              : static negative overshoot margin. 0~1023;                                     . unsigned  , default = 200
//Bit 11:10,        reserved
//Bit  9: 0,        reg_pk_os_up                                : static positive overshoot margin. 0~1023;                                     . unsigned  , default = 200
#define PK_NR_ENABLE                               ((0x3227  << 2) + 0xff900000)
//Bit 31: 4,        reserved
//Bit  3: 2,        reg_3d_mode                                 , 0: no 3D; 1: L/R; 2: T/B; 3: horizontal interleaved, dft = 0                                             //. unsigned  , default = 0
//Bit  1,            reg_pk_en                                                                                                                   . unsigned  , default = 1
//Bit  0,            reg_nr_en                                                                                                                   . unsigned  , default = 1
#define PK_DRT_SAD_MISC                            ((0x3228  << 2) + 0xff900000)
//Bit 31:24,        reg_pk_sad_ver_gain                         : gain to sad[4], 16 normalized to "1";                                         . unsigned  , default = 32
//Bit 23:16,        reg_pk_sad_hor_gain                         : gain to sad[0], 16 normalized to "1";                                         . unsigned  , default = 24
//Bit 15:12,        reserved
//Bit 11            reserved
//Bit 10: 9,        reg_pk_bias_diag                            : bias towards diag                                                             . unsigned  , default = 0
//Bit  8,           reserved
//Bit  7: 5,        reserved
//Bit  4: 0,        reg_pk_drt_force                            : force direction of drt peaking filter, h2b: 0:hp drt force, 1: bp drt force; 2: bp+hp drt force, 3: no force;. unsigned  , default = 24
#define NR_TI_DNLP_BLEND                           ((0x3229  << 2) + 0xff900000)
//Bit 31:11,        reserved
//Bit 10: 8,        reg_dnlp_input_mode                         : dnlp input options. 0: org_y; 1: gau_y; 2: gauadp_y; 3: edgadplpf_y; 4: nr_y;5: lti_y; 6: pk_y (before os);7: pk_y (after os). unsigned  , default = 4
//Bit  7: 4,        reserved
//Bit  3: 2,        reg_nr_cti_blend_mode                       : blend mode of nr and lti result: 0: nr; 1:cti; 2: (nr+cti)/2; 3:cti + dlt_nr  . unsigned  , default = 1
//Bit  1: 0,        reg_nr_lti_blend_mode                       : blend mode of nr and lti result: 0: nr; 1:lti; 2: (nr+lti)/2; 3:lti + dlt_nr  . unsigned  , default = 2
////////////////////////////////////////////////////////////////////////////////
// new ti regsters from here
////////////////////////////////////////////////////////////////////////////////
#define LTI_DIR_CORE_ALPHA                         ((0x322a  << 2) + 0xff900000)
//Bit 31:30,        reserved
//Bit 29:24,        reg_adp_lti_dir_alp_core_ofst               : ofst to min_err, alpha = (min_err - (max_err-min_err)*rate + ofst)/max_err*64;    dft=10. unsigned  , default = 10
//Bit 23:20,        reserved
//Bit 19:16,        reg_adp_lti_dir_alp_core_rate               : ofset to min_err, alpha = (min_err - (max_err-min_err)*rate + ofst)/max_err*64;   dft=0/32. unsigned  , default = 0
//Bit 15:14,        reserved
//Bit 13: 8,        reg_adp_lti_dir_alpmin                      : min value of alpha, alpha = (min_err+x +ofst)/max_err*64; dft=10              . unsigned  , default = 0
//Bit  7: 6,        reserved
//Bit  5: 0,        reg_adp_lti_dir_alpmax                      : max value of alpha, alpha = (min_err+x +ofst)/max_err*64; dft=63              . unsigned  , default = 63
#define CTI_DIR_ALPHA                              ((0x322b  << 2) + 0xff900000)
//Bit 31:30,        reserved
//Bit 29:24,        reg_adp_cti_dir_alp_core_ofst               : ofst to min_err, alpha = (min_err - (max_err-min_err)*rate + ofst)/max_err*64;    dft=10. unsigned  , default = 5
//Bit 23:20,        reserved
//Bit 19:16,        reg_adp_cti_dir_alp_core_rate               : ofset to min_err, alpha = (min_err - (max_err-min_err)*rate + ofst)/max_err*64;   dft=0/32. unsigned  , default = 0
//Bit 15:14,        reserved
//Bit 13: 8,        reg_adp_cti_dir_alpmin                      : min value of alpha, alpha = (min_err +x+ofst)/max_err*64;  dft=10             . unsigned  , default = 0
//Bit  7: 6,        reserved
//Bit  5: 0,        reg_adp_cti_dir_alpmax                      : max value of alpha, alpha = (min_err +x+ofst)/max_err*64;  dft=63             . unsigned  , default = 63
#define LTI_CTI_DF_GAIN                            ((0x322c  << 2) + 0xff900000)
//Bit 31:30,        reserved
//Bit 29:24,        reg_adp_lti_hdf_gain                        : 8 normalized to "1";  default = 12                                            . unsigned  , default = 12
//Bit 23:22,        reserved
//Bit 21:16,        reg_adp_lti_vdf_gain                        : 8 normalized to "1";  default = 12                                            . unsigned  , default = 12
//Bit 15:14,        reserved
//Bit 13: 8,        reg_adp_cti_hdf_gain                        : 8 normalized to "1";  default = 12                                            . unsigned  , default = 12
//Bit  7: 6,        reserved
//Bit  5: 0,        reg_adp_cti_vdf_gain                        : 8 normalized to "1";  default = 12                                            . unsigned  , default = 12
#define LTI_CTI_DIR_AC_DBG                         ((0x322d  << 2) + 0xff900000)
//Bit 31,            reserved
//Bit 30,            reg_adp_lti_dir_lpf                         : 0: no lpf; 1: [1 2 2 2 1]/8 lpf                                               . unsigned  , default = 1
//Bit 29,            reserved
//Bit 28,            reg_adp_lti_dir_difmode                     : 0: y_dif; 1: y_dif + (u_dif+v_dif)/2;                                         . unsigned  , default = 1
//Bit 27,            reserved
//Bit 26,            reg_adp_cti_dir_lpf                         : 0: no lpf; 1: [1 2 2 2 1]/8 lpf  dft=1                                        . unsigned  , default = 1
//Bit 25:24,        reg_adp_cti_dir_difmode                     : 0: (u_dif+v_dif); 1: y_dif/2 + (u_dif+v_dif)*3/4; 2: y_dif + (u_dif+v_dif)/2; 3: y_dif*2 (not recomended). unsigned  , default = 2
//Bit 23:22,        reg_adp_hvlti_dcblend_mode                  : 0: hlti_dc; 1:vlti_dc; 2: avg  3; blend on alpha                              . unsigned  , default = 3
//Bit 21:20,        reg_adp_hvcti_dcblend_mode                  : 0: hcti_dc; 1:vcti_dc; 2: avg  3; blend on alpha                              . unsigned  , default = 2
//Bit 19:18,        reg_adp_hvlti_acblend_mode                  : hlti_ac; 1:vlti_ac; 2: add  3;:adaptive to alpha                              . unsigned  , default = 3
//Bit 17:16,        reg_adp_hvcti_acblend_mode                  : hcti_ac; 1:vcti_ac; 2: add  3;: adaptive to alpha                             . unsigned  , default = 2
//Bit 15,            reserved
//Bit 14:12,        reg_adp_hlti_debug                          , for hlti debug, default = 0                                                   . unsigned  , default = 0
//Bit 11,            reserved
//Bit 10: 8,        reg_adp_vlti_debug                          , for vlti debug, default = 0                                                   . unsigned  , default = 0
//Bit  7,            reserved
//Bit  6: 4,        reg_adp_hcti_debug                          , for hcti debug, default = 0                                                   . unsigned  , default = 0
//Bit  3,            reserved
//Bit  2: 0,        reg_adp_vcti_debug                          , for vcti debug, default = 0                                                   . unsigned  , default = 0
#define HCTI_FLT_CLP_DC                            ((0x322e  << 2) + 0xff900000)
//Bit 31:29,        reserved
//Bit 28,            reg_adp_hcti_en                             , 0: no cti, 1: new cti, default = 1                                            . unsigned  , default = 1
//Bit 27:26,        reg_adp_hcti_vdn_flt                        , 0: no lpf; 1:[0,2,4,2,0],  2 : [1 2 2 2 1]/8  3:[1 0 2 0 1]/4, default = 2    . unsigned  , default = 2
//Bit 25:24,        reg_adp_hcti_hdn_flt                        , 0: no lpf; 1:[0, 0, 0, 4, 8, 4, 0, 0, 0], 2:[0, 0, 2, 4, 4, 4, 2, 0, 0], 3: [1, 2, 2, 2, 2, 2, 2, 2, 1], default = 2. unsigned  , default = 2
//Bit 23:22,        reg_adp_hcti_ddn_flt                        , 0: no lpf; 1:[0,2,4,2,0],  2 : [1 2 2 2 1]/8 3:[1 0 2 0 1]/4, default = 2     . unsigned  , default = 2
//Bit 21:20,        reg_adp_hcti_lpf0_flt                       , 0:no filter; 1:sigma=0.75, 2: sigma = 1.0, 3: sigma = 1.5, default = 1        . unsigned  , default = 1
//Bit 19:18,        reg_adp_hcti_lpf1_flt                       , 0:no filter; 1:sigma= 2.0, 2: sigma = 3.0, 3: sigma = 4.0, default = 1        . unsigned  , default = 1
//Bit 17:16,        reg_adp_hcti_lpf2_flt                       , 0:no filter; 1:sigma=5.0,  2: sigma = 9.0, 3: sigma = 13.0, default = 1       . unsigned  , default = 1
//Bit 15:12,        reg_adp_hcti_hard_clp_win                   , window size, 0~8, default = 5                                                 . unsigned  , default = 5
//Bit 11: 8,        reg_adp_hcti_hard_win_min                   , window size, 0~8, default = 3                                                 . unsigned  , default = 3
//Bit  7: 5,        reserved
//Bit  4,            reg_adp_hcti_clp_mode                       , 0: hard clip, 1: adaptive clip, default = 1                                   . unsigned  , default = 1
//Bit  3,            reserved
//Bit  2: 0,        reg_adp_hcti_dc_mode                        , 0:dn, 1:lpf0, 2:lpf1, 3:lpf2, 4: lpf3: 5: vdn result; 6/7:org, default = 0    . unsigned  , default = 0
#define HCTI_BST_GAIN                              ((0x322f  << 2) + 0xff900000)
//Bit 31:24,        reg_adp_hcti_bst_gain0                      : gain of the bandpass 0 (lpf1-lpf2)- LBP, default = 80                         . unsigned  , default = 80
//Bit 23:16,        reg_adp_hcti_bst_gain1                      : gain of the bandpass 1 (lpf0-lpf1)- BP, default = 96                          . unsigned  , default = 96
//Bit 15: 8,        reg_adp_hcti_bst_gain2                      : gain of the bandpass 2 (hdn-lpf0)-  HP, default = 64                          . unsigned  , default = 64
//Bit  7: 0,        reg_adp_hcti_bst_gain3                      : gain of the unsharp band (yuvin-hdn) - US, default = 16                       . unsigned  , default = 16
#define HCTI_BST_CORE                              ((0x3230  << 2) + 0xff900000)
//Bit 31:24,        reg_adp_hcti_bst_core0                      : core of the bandpass 0 (lpf1-lpf2)- LBP, default = 5                          . unsigned  , default = 5
//Bit 23:16,        reg_adp_hcti_bst_core1                      : core of the bandpass 1 (lpf0-lpf1)- BP, default = 5                           . unsigned  , default = 5
//Bit 15: 8,        reg_adp_hcti_bst_core2                      : core of the bandpass 2 (hdn-lpf0)-  HP, default = 5                           . unsigned  , default = 5
//Bit  7: 0,        reg_adp_hcti_bst_core3                      : core of the unsharp band (yuvin-hdn) - US, default = 3                        . unsigned  , default = 5
#define HCTI_CON_2_GAIN_0                          ((0x3231  << 2) + 0xff900000)
//Bit 31:29,        reg_adp_hcti_con_mode                       : con mode 0:[0, 0,-1, 1, 0, 0, 0]+[0, 0, 0, 1,-1, 0, 0], 1: [0, 0,-1, 0, 1, 0, 0], 2: [0,-1, 0, 0, 0, 1, 0], 3:[-1, 0, 0, 0, 0, 0, 1], 4: .... default = 1. unsigned  , default = 1
//Bit 28:26,        reg_adp_hcti_dx_mode                        : dx mode 0: [-1 1 0]; 1~7: [-1 (2x+1)"0" 1], default = 2                       . unsigned  , default = 2
//Bit 25:24,        reg_adp_hcti_con_lpf                        : lpf mode of the con: 0: [1 2 1]/4; 1:[1 2 2 2 1]/8, default = 0               . unsigned  , default = 0
//Bit 23:16,        reg_adp_hcti_con_2_gain0                    , default = 25                                                                  . unsigned  , default = 25
//Bit 15: 8,        reg_adp_hcti_con_2_gain1                    , default = 60                                                                  . unsigned  , default = 60
//Bit  7: 0,        reg_adp_hcti_con_2_gain2                    0;, default = 5                                                                 . unsigned  , default = 5
#define HCTI_CON_2_GAIN_1                          ((0x3232  << 2) + 0xff900000)
//Bit 31:24,        reg_adp_hcti_con_2_gain3                    96;, default = 96                                                               . unsigned  , default = 96
//Bit 23:16,        reg_adp_hcti_con_2_gain4                    5;, default = 5                                                                 . unsigned  , default = 5
//Bit 15: 8,        reg_adp_hcti_con_2_gain5                    80;, default = 80                                                               . unsigned  , default = 80
//Bit  7: 0,        reg_adp_hcti_con_2_gain6                    20;, default = 20                                                               . unsigned  , default = 20
#define HCTI_OS_MARGIN                             ((0x3233  << 2) + 0xff900000)
//Bit 31: 8,        reserved
//Bit  7: 0,        reg_adp_hcti_os_margin                      : margin for hcti overshoot, default = 0                                        . unsigned  , default = 0
#define HLTI_FLT_CLP_DC                            ((0x3234  << 2) + 0xff900000)
//Bit 31:29,        reserved
//Bit 28,            reg_adp_hlti_en                             , 0: no cti, 1: new cti, default = 1                                            . unsigned  , default = 1
//Bit 27:26,        reg_adp_hlti_vdn_flt                        , 0: no lpf; 1:[0,2,4,2,0],   2 : [1 2 2 2 1]/8 3:[1 0 2 0 1]/4, default = 2    . unsigned  , default = 2
//Bit 25:24,        reg_adp_hlti_hdn_flt                        , 0: no lpf; 1:[0, 0, 0, 4, 8, 4, 0, 0, 0], 2:[0, 0, 2, 4, 4, 4, 2, 0, 0], 3: [1, 2, 2, 2, 2, 2, 2, 2, 1], default = 1. unsigned  , default = 1
//Bit 23:22,        reg_adp_hlti_ddn_flt                        , 0: no lpf; 1:[0,2,4,2,0],   2 : [1 2 2 2 1]/8 3:[1 0 2 0 1]/4, default = 1    . unsigned  , default = 1
//Bit 21:20,        reg_adp_hlti_lpf0_flt                       , 0:no filter; 1:sigma=0.75, 2: sigma = 1.0, 3: sigma = 1.5, default = 1        . unsigned  , default = 1
//Bit 19:18,        reg_adp_hlti_lpf1_flt                       , 0:no filter; 1:sigma= 2.0, 2: sigma = 3.0, 3: sigma = 4.0, default = 1        . unsigned  , default = 1
//Bit 17:16,        reg_adp_hlti_lpf2_flt                       , 0:no filter; 1:sigma=5.0,  2: sigma = 9.0, 3: sigma = 13.0, default = 1       . unsigned  , default = 1
//Bit 15:12,        reg_adp_hlti_hard_clp_win                   , window size, 0~8, default = 2                                                 . unsigned  , default = 2
//Bit 11: 8,        reg_adp_hlti_hard_win_min                   , window size, 0~8, default = 1                                                 . unsigned  , default = 1
//Bit  7: 5,        reserved
//Bit  4,            reg_adp_hlti_clp_mode                       , 0: hard clip, 1: adaptive clip, default = 0                                   . unsigned  , default = 0
//Bit  3,            reserved
//Bit  2: 0,        reg_adp_hlti_dc_mode                        , 0:dn, 1:lpf0, 2:lpf1, 3:lpf2, 4: lpf3: 5: vdn result; 6/7:org, default = 4    . unsigned  , default = 4
#define HLTI_BST_GAIN                              ((0x3235  << 2) + 0xff900000)
//Bit 31:24,        reg_adp_hlti_bst_gain0                      : gain of the bandpass 0 (lpf1-lpf2)- LBP, default = 32                         . unsigned  , default = 32
//Bit 23:16,        reg_adp_hlti_bst_gain1                      : gain of the bandpass 1 (lpf0-lpf1)- BP, default = 32                          . unsigned  , default = 32
//Bit 15: 8,        reg_adp_hlti_bst_gain2                      : gain of the bandpass 2 (hdn-lpf0)-  HP, default = 28                          . unsigned  , default = 28
//Bit  7: 0,        reg_adp_hlti_bst_gain3                      : gain of the unsharp band (yuvin-hdn) - US, default = 12                       . unsigned  , default = 12
#define HLTI_BST_CORE                              ((0x3236  << 2) + 0xff900000)
//Bit 31:24,        reg_adp_hlti_bst_core0                      : core of the bandpass 0 (lpf1-lpf2)- LBP, default = 5                          . unsigned  , default = 5
//Bit 23:16,        reg_adp_hlti_bst_core1                      : core of the bandpass 1 (lpf0-lpf1)- BP, default = 5                           . unsigned  , default = 5
//Bit 15: 8,        reg_adp_hlti_bst_core2                      : core of the bandpass 2 (hdn-lpf0)-  HP, default = 5                           . unsigned  , default = 5
//Bit  7: 0,        reg_adp_hlti_bst_core3                      : core of the unsharp band (yuvin-hdn) - US, default = 3                        . unsigned  , default = 3
#define HLTI_CON_2_GAIN_0                          ((0x3237  << 2) + 0xff900000)
//Bit 31:29,        reg_adp_hlti_con_mode                       : con mode 0:[0, 0,-1, 1, 0, 0, 0]+[0, 0, 0, 1,-1, 0, 0], 1: [0, 0,-1, 0, 1, 0, 0], 2: [0,-1, 0, 0, 0, 1, 0], 3:[-1, 0, 0, 0, 0, 0, 1], 4: ....., default = 1. unsigned  , default = 1
//Bit 28:26,        reg_adp_hlti_dx_mode                        : dx mode 0: [-1 1 0]; 1~7: [-1 (2x+1)"0" 1], default = 1                       . unsigned  , default = 1
//Bit 25:24,        reg_adp_hlti_con_lpf                        : lpf mode of the con: 0: [1 2 1]/4; 1:[1 2 2 2 1]/8, default = 0               . unsigned  , default = 0
//Bit 23:16,        reg_adp_hlti_con_2_gain0                    25;, default = 25                                                               . unsigned  , default = 25
//Bit 15: 8,        reg_adp_hlti_con_2_gain1                    60;, default = 60                                                               . unsigned  , default = 60
//Bit  7: 0,        reg_adp_hlti_con_2_gain2                    0;, default = 5                                                                . unsigned  , default = 5
#define HLTI_CON_2_GAIN_1                          ((0x3238  << 2) + 0xff900000)
//Bit 31:24,        reg_adp_hlti_con_2_gain3                    96;, default = 96                                                               . unsigned  , default = 96
//Bit 23:16,        reg_adp_hlti_con_2_gain4                    5;, default = 95                                                                . unsigned  , default = 95
//Bit 15: 8,        reg_adp_hlti_con_2_gain5                    80;, default = 80                                                               . unsigned  , default = 80
//Bit  7: 0,        reg_adp_hlti_con_2_gain6                    20;, default = 20                                                               . unsigned  , default = 20
#define HLTI_OS_MARGIN                             ((0x3239  << 2) + 0xff900000)
//Bit 31: 8,        reserved
//Bit  7: 0,        reg_adp_hlti_os_margin                      : margin for hlti overshoot, default = 0                                        . unsigned  , default = 0
#define VLTI_FLT_CON_CLP                           ((0x323a  << 2) + 0xff900000)
//Bit 31:15,        reserved
//Bit 14,            reg_adp_vlti_en                             : enable bit of vlti, default = 1                                               . unsigned  , default = 1
//Bit 13:12,        reg_adp_vlti_hxn_flt                        : 0: no dn; 1: [1 2 1]/4;  2 : [1 2 2 2 1]/8 3:[1 0 2 0 1]/4, default = 2       . unsigned  , default = 2
//Bit 11:10,        reg_adp_vlti_dxn_flt                        : 0: no dn; 1: [1 2 1]/4;  2 : [1 2 2 2 1]/8 3:[1 0 2 0 1]/4, default = 2       . unsigned  , default = 2
//Bit  9: 8,        reg_adp_vlti_han_flt                        : 0: no dn; 1: [1 2 1]/4;  2 : [1 2 2 2 1]/8 3:[1 0 2 0 1]/4, default = 2       . unsigned  , default = 2
//Bit  7: 6,        reg_adp_vlti_dan_flt                        : 0: no dn; 1: [1 2 1]/4;  2 : [1 2 2 2 1]/8 3:[1 0 2 0 1]/4, default = 2       . unsigned  , default = 2
//Bit  5: 4,        reg_adp_vlti_dx_mode                        : 0:[-1 1] 1:[-1 0 -1]; 2/3: [-1 0 0 0 -1], default = 1                         . unsigned  , default = 1
//Bit  3,            reserved
//Bit  2,            reg_adp_vlti_con_lpf                        : lpf mode of the con: 0: [1 2 1]/4; 1:[1 2 2 2 1]/8, default = 0               . unsigned  , default = 0
//Bit  1,            reserved
//Bit  0,            reg_adp_vlti_hard_clp_win                   : window size; 0: 1x3 window; 1: 1x5 window, default = 0                        . unsigned  , default = 0
#define VLTI_BST_GAIN                              ((0x323b  << 2) + 0xff900000)
//Bit 31:24,        reserved
//Bit 23:16,        reg_adp_vlti_bst_gain0                      : gain to boost filter [-1 2 -1];, default = 32                                 . unsigned  , default = 32
//Bit 15: 8,        reg_adp_vlti_bst_gain1                      : gain to boost filter [-1 0 2 0 -1];, default = 32                             . unsigned  , default = 32
//Bit  7: 0,        reg_adp_vlti_bst_gain2                      : gain to boost filter usf, default = 32                                        . unsigned  , default = 32
#define VLTI_BST_CORE                              ((0x323c  << 2) + 0xff900000)
//Bit 31:24,        reserved
//Bit 23:16,        reg_adp_vlti_bst_core0                      : coring to boost filter [-1 2 -1];, default = 5                                . unsigned  , default = 5
//Bit 15: 8,        reg_adp_vlti_bst_core1                      : coring to boost filter [-1 0 2 0 -1];, default = 5                            . unsigned  , default = 5
//Bit  7: 0,        reg_adp_vlti_bst_core2                      : coring to boost filter usf, default = 3                                       . unsigned  , default = 3
#define VLTI_CON_2_GAIN_0                          ((0x323d  << 2) + 0xff900000)
//Bit 31:24,        reg_adp_vlti_con_2_gain0                    25;, default = 25                                                               . unsigned  , default = 25
//Bit 23:16,        reg_adp_vlti_con_2_gain1                    60;, default = 60                                                               . unsigned  , default = 60
//Bit 15: 8,        reg_adp_vlti_con_2_gain2                    0;, default = 5                                                                . unsigned  , default = 5
//Bit  7: 0,        reg_adp_vlti_con_2_gain3                    96;, default = 96                                                               . unsigned  , default = 96
#define VLTI_CON_2_GAIN_1                          ((0x323e  << 2) + 0xff900000)
//Bit 31:24,        reg_adp_vlti_con_2_gain4                    5;, default = 95                                                                . unsigned  , default = 95
//Bit 23:16,        reg_adp_vlti_con_2_gain5                    80;, default = 80                                                               . unsigned  , default = 80
//Bit 15: 8,        reg_adp_vlti_con_2_gain6                    20;, default = 20                                                               . unsigned  , default = 20
//Bit  7: 0,        reg_adp_vlti_os_margin                      : margin for vlti overshoot, default = 0                                        . unsigned  , default = 0
#define VCTI_FLT_CON_CLP                           ((0x323f  << 2) + 0xff900000)
//Bit 31:15,        reserved
//Bit 14,            reg_adp_vcti_en                             : enable bit of vlti, default = 1                                               . unsigned  , default = 1
//Bit 13:12,        reg_adp_vcti_hxn_flt                        : 0: no dn; 1: [1 2 1]/4;  2 : [1 2 2 2 1]/8 3:[1 0 2 0 1]/4, default = 2       . unsigned  , default = 2
//Bit 11:10,        reg_adp_vcti_dxn_flt                        : 0: no dn; 1: [1 2 1]/4;  2 : [1 2 2 2 1]/8 3:[1 0 2 0 1]/4, default = 2       . unsigned  , default = 2
//Bit  9: 8,        reg_adp_vcti_han_flt                        : 0: no dn; 1: [1 2 1]/4;  2 : [1 2 2 2 1]/8 3:[1 0 2 0 1]/4, default = 2       . unsigned  , default = 2
//Bit  7: 6,        reg_adp_vcti_dan_flt                        : 0: no dn; 1: [1 2 1]/4;  2 : [1 2 2 2 1]/8 3:[1 0 2 0 1]/4, default = 2       . unsigned  , default = 2
//Bit  5: 4,        reg_adp_vcti_dx_mode                        : 0:[-1 1] 1:[-1 0 -1]; 2/3: [-1 0 0 0 -1], default = 1                         . unsigned  , default = 1
//Bit  3,            reserved
//Bit  2,            reg_adp_vcti_con_lpf                        : lpf mode of the con: 0: [1 2 1]/4; 1:[1 2 2 2 1]/8, default = 0               . unsigned  , default = 0
//Bit  1,            reserved
//Bit  0,            reg_adp_vcti_hard_clp_win                   : window size; 0: 1x3 window; 1: 1x5 window, default = 0                        . unsigned  , default = 0
#define VCTI_BST_GAIN                              ((0x3240  << 2) + 0xff900000)
//Bit 31:24,        reserved
//Bit 23:16,        reg_adp_vcti_bst_gain0                      : gain to boost filter [-1 2 -1];, default = 16                                  . unsigned  , default = 16
//Bit 15: 8,        reg_adp_vcti_bst_gain1                      : gain to boost filter [-1 0 2 0 -1];, default = 16                              . unsigned  , default = 16
//Bit  7: 0,        reg_adp_vcti_bst_gain2                      : gain to boost filter usf, default = 16                                         . unsigned  , default = 16
#define VCTI_BST_CORE                              ((0x3241  << 2) + 0xff900000)
//Bit 31:24,        reserved
//Bit 23:16,        reg_adp_vcti_bst_core0                      : coring to boost filter [-1 2 -1];, default = 5                                . unsigned  , default = 5
//Bit 15: 8,        reg_adp_vcti_bst_core1                      : coring to boost filter [-1 0 2 0 -1];, default = 5                            . unsigned  , default = 5
//Bit  7: 0,        reg_adp_vcti_bst_core2                      : coring to boost filter usf, default = 3                                       . unsigned  , default = 3
#define VCTI_CON_2_GAIN_0                          ((0x3242  << 2) + 0xff900000)
//Bit 31:24,        reg_adp_vcti_con_2_gain0                    25;, default = 25                                                               . unsigned  , default = 25
//Bit 23:16,        reg_adp_vcti_con_2_gain1                    60;, default = 60                                                               . unsigned  , default = 60
//Bit 15: 8,        reg_adp_vcti_con_2_gain2                    0;, default = 5                                                                . unsigned  , default = 5
//Bit  7: 0,        reg_adp_vcti_con_2_gain3                    96;, default = 96                                                               . unsigned  , default = 96
#define VCTI_CON_2_GAIN_1                          ((0x3243  << 2) + 0xff900000)
//Bit 31:24,        reg_adp_vcti_con_2_gain4                    5;, default = 95                                                                . unsigned  , default = 95
//Bit 23:16,        reg_adp_vcti_con_2_gain5                    80;, default = 80                                                               . unsigned  , default = 80
//Bit 15: 8,        reg_adp_vcti_con_2_gain6                    20;, default = 20                                                               . unsigned  , default = 20
//Bit  7: 0,        reg_adp_vcti_os_margin                      : margin for vcti overshoot, default = 0                                        . unsigned  , default = 0
#define SHARP_3DLIMIT                              ((0x3244  << 2) + 0xff900000)
//Bit 31:29,        reserved
//Bit 28:16,        reg_3d_mid_width                            ,width of left part of 3d input, dft = half size of input width  default = 0    . unsigned  , default = 960
//Bit 15:13,        reserved
//Bit 12: 0,        reg_3d_mid_height                           ,height of left part of 3d input, dft = half size of input height  default = 0  . unsigned  , default = 540
#define DNLP_EN                                    ((0x3245  << 2) + 0xff900000)
//Bit 31: 1,        reserved
//Bit  0,            reg_dnlp_en                                                                                                                 . unsigned  , default = 1
#define DNLP_00                                    ((0x3246  << 2) + 0xff900000)
//Bit 31: 0,        reg_dnlp_ygrid0                             : dnlp00                                                                        . unsigned  , default = 32'h08060402
#define DNLP_01                                    ((0x3247  << 2) + 0xff900000)
//Bit 31: 0,        reg_dnlp_ygrid1                             : dnlp01                                                                        . unsigned  , default = 32'h100e0c0a
#define DNLP_02                                    ((0x3248  << 2) + 0xff900000)
//Bit 31: 0,        reg_dnlp_ygrid2                             : dnlp02                                                                        . unsigned  , default = 32'h1a171412
#define DNLP_03                                    ((0x3249  << 2) + 0xff900000)
//Bit 31: 0,        reg_dnlp_ygrid3                             : dnlp03                                                                        . unsigned  , default = 32'h2824201d
#define DNLP_04                                    ((0x324a  << 2) + 0xff900000)
//Bit 31: 0,        reg_dnlp_ygrid4                             : dnlp04                                                                        . unsigned  , default = 32'h3834302c
#define DNLP_05                                    ((0x324b  << 2) + 0xff900000)
//Bit 31: 0,        reg_dnlp_ygrid5                             : dnlp05                                                                        . unsigned  , default = 32'h4b45403c
#define DNLP_06                                    ((0x324c  << 2) + 0xff900000)
//Bit 31: 0,        reg_dnlp_ygrid6                             : dnlp06                                                                        . unsigned  , default = 32'h605b5550
#define DNLP_07                                    ((0x324d  << 2) + 0xff900000)
//Bit 31: 0,        reg_dnlp_ygrid7                             : dnlp07                                                                        . unsigned  , default = 32'h80787068
#define DNLP_08                                    ((0x324e  << 2) + 0xff900000)
//Bit 31: 0,        reg_dnlp_ygrid8                             : dnlp08                                                                        . unsigned  , default = 32'ha0989088
#define DNLP_09                                    ((0x324f  << 2) + 0xff900000)
//Bit 31: 0,        reg_dnlp_ygrid9                             : dnlp09                                                                        . unsigned  , default = 32'hb8b2aca6
#define DNLP_10                                    ((0x3250  << 2) + 0xff900000)
//Bit 31: 0,        reg_dnlp_ygrid10                            : dnlp10                                                                        . unsigned  , default = 32'hc8c4c0bc
#define DNLP_11                                    ((0x3251  << 2) + 0xff900000)
//Bit 31: 0,        reg_dnlp_ygrid11                            : dnlp11                                                                        . unsigned  , default = 32'hd4d2cecb
#define DNLP_12                                    ((0x3252  << 2) + 0xff900000)
//Bit 31: 0,        reg_dnlp_ygrid12                            : dnlp12                                                                        . unsigned  , default = 32'hdad8d7d6
#define DNLP_13                                    ((0x3253  << 2) + 0xff900000)
//Bit 31: 0,        reg_dnlp_ygrid13                            : dnlp13                                                                        . unsigned  , default = 32'he2e0dedc
#define DNLP_14                                    ((0x3254  << 2) + 0xff900000)
//Bit 31: 0,        reg_dnlp_ygrid14                            : dnlp14                                                                        . unsigned  , default = 32'hf0ece8e4
#define DNLP_15                                    ((0x3255  << 2) + 0xff900000)
//Bit 31: 0,        reg_dnlp_ygrid15                            : dnlp15                                                                        . unsigned  , default = 32'hfffcf8f4
#define DEMO_CRTL                                  ((0x3256  << 2) + 0xff900000)
//Bit 31:19,        reserved
//Bit 18:17,        demo_disp_position                                                                                                          . unsigned  , default = 2
//Bit 16,            demo_hsvsharp_enable                                                                                                        . unsigned  , default = 0
//Bit 15:13,        reserved
//Bit 12: 0,        demo_left_top_screen_width                  :                                                                               . unsigned  , default = 360
#define SHARP_SR2_CTRL                             ((0x3257  << 2) + 0xff900000)
//Bit 31:22,    reserved
//Bit 21:16,    reg_sr2_pk_la_err_dis_rate         :     . unsigned  , low angle and high angle error should not be no less than nearby_error*rate/64; default = 24
//Bit 15:8,     reg_sr2_pk_sad_diag_gain           :     . unsigned  , gain to sad[2] and sad[6], 16 normalized to "1"; default = 16
//Bit 7,        reg_sr2_vert_outphs                :     . unsigned  , default = 0
//Bit 6,        reg_sr2_horz_outphs                :     . unsigned  , default = 0
//Bit 5,        reg_sr2_vert_ratio                 :     . unsigned  , default = 0
//Bit 4,        reg_sr2_hori_ratio                 :     . unsigned  , default = 0
//Bit 3,        reg_sr2_bic_norm                   :     . unsigned  , default = 1
//Bit 2,        reg_sr2_enable                     :     . unsigned  , default = 0
//Bit 1,        reg_sr2_sharp_prc_lr_hbic          :     . unsigned  , default = 0
//Bit 0,        reg_sr2_sharp_prc_lr               : lti/cti/nr/peaking processing using LR grid, 0: on HR grid; 1:on LR grid, horizontally no upscale, but using simple bic   . unsigned  , default = 0
#define SHARP_SR2_YBIC_HCOEF0                      ((0x3258  << 2) + 0xff900000)
//Bit 31:24, reg_sr2_y_bic_hcoef03            Horizontal bi-cubic filter of 1.0 phase of luma channel Filter will be normalized to 128 as ‘1’; default=0
//Bit 23:16, reg_sr2_y_bic_hcoef02            the same as above; default=0
//Bit 15: 8, reg_sr2_y_bic_hcoef01            the same as above; default=64
//Bit  7: 0, reg_sr2_y_bic_hcoef00            the same as above; default=0
#define SHARP_SR2_YBIC_HCOEF1                      ((0x3259  << 2) + 0xff900000)
//Bit 31:24, reg_sr2_y_bic_hcoef13            Horizontal bi-cubic filter of 0.5 phase of luma channel,Filter will be normalized to 128 as ‘1’; default=-4
//Bit 23:16, reg_sr2_y_bic_hcoef12            the same as above; default=36
//Bit 15: 8, reg_sr2_y_bic_hcoef11            the same as above; default=36
//Bit  7: 0, reg_sr2_y_bic_hcoef10            the same as above; default=-4
#define SHARP_SR2_CBIC_HCOEF0                      ((0x325a  << 2) + 0xff900000)
//Bit 31:24, reg_sr2_c_bic_hcoef03            Horizontal bi-cubic filter of 1.0 phase of luma channel ,Filter will be normalized to 128 as ‘1’; default=0
//Bit 23:16, reg_sr2_c_bic_hcoef02            the same as above; default=21
//Bit 15: 8, reg_sr2_c_bic_hcoef01            the same as above; default=22
//Bit  7: 0, reg_sr2_c_bic_hcoef00            the same as above; default=21
#define SHARP_SR2_CBIC_HCOEF1                      ((0x325b  << 2) + 0xff900000)
//Bit 31:24, reg_sr2_c_bic_hcoef13            Horizontal bi-cubic filter of 0.5 phase of luma channel,Filter will be normalized to 128 as ‘1’; default=-4
//Bit 23:16, reg_sr2_c_bic_hcoef12            the same as above; default=36
//Bit 15: 8, reg_sr2_c_bic_hcoef11            the same as above; default=36
//Bit  7: 0, reg_sr2_c_bic_hcoef10            the same as above; default=-4
#define SHARP_SR2_YBIC_VCOEF0                      ((0x325c  << 2) + 0xff900000)
//Bit 31:24, reg_sr2_y_bic_vcoef03            Horizontal bi-cubic filter of 1.0 phase of luma channel, Filter will be normalized to 128 as ‘1’; default=0
//Bit 23:16, reg_sr2_y_bic_vcoef02            the same as above; default=0
//Bit 15: 8, reg_sr2_y_bic_vcoef01            the same as above; default=64
//Bit  7: 0, reg_sr2_y_bic_vcoef00            the same as above; default=0
#define SHARP_SR2_YBIC_VCOEF1                      ((0x325d  << 2) + 0xff900000)
//Bit 31:24, reg_sr2_y_bic_vcoef13            Horizontal bi-cubic filter of 0.5 phase of luma channe, lFilter will be normalized to 128 as ‘1’; default=-4
//Bit 23:16, reg_sr2_y_bic_vcoef12            the same as above; default=36
//Bit 15: 8, reg_sr2_y_bic_vcoef11            the same as above; default=36
//Bit  7: 0, reg_sr2_y_bic_vcoef10            the same as above; default=-4
#define SHARP_SR2_CBIC_VCOEF0                      ((0x325e  << 2) + 0xff900000)
//Bit 31:24, reg_sr2_c_bic_vcoef03            Horizontal bi-cubic filter of 1.0 phase of luma channel, Filter will be normalized to 128 as ‘1’; default=0
//Bit 23:16, reg_sr2_c_bic_vcoef02            the same as above; default=21
//Bit 15: 8, reg_sr2_c_bic_vcoef01            the same as above; default=22
//Bit  7: 0, reg_sr2_c_bic_vcoef00            the same as above; default=21
#define SHARP_SR2_CBIC_VCOEF1                      ((0x325f  << 2) + 0xff900000)
//Bit 31:24, reg_sr2_c_bic_vcoef13            Horizontal bi-cubic filter of 0.5 phase of luma channel,Filter will be normalized to 128 as ‘1’; default=-4
//Bit 23:16, reg_sr2_c_bic_vcoef12            the same as above; default=36
//Bit 15: 8, reg_sr2_c_bic_vcoef11            the same as above; default=36
//Bit  7: 0, reg_sr2_c_bic_vcoef10            the same as above; default=-4
#define SHARP_SR2_MISC                             ((0x3260  << 2) + 0xff900000)
//Bit 31:2,   reserved
//Bit 1,      reg_sr2_cmpmux_bef                 :     . unsigned  , default = 0,0 no swap anf for YUV->YUV; 1, swapped and for RGB->GBR;
//Bit 0,      reg_sr2_cmpmux_aft                 :     . unsigned  , default = 0,0 no swap anf for YUV->YUV; 1, swapped and for GBR-RGB;
#define SHARP_SR3_SAD_CTRL                         ((0x3261  << 2) + 0xff900000)
//Bit 31:30 reserved
//Bit 29:24 reg_sr3_pk_sad_core_rate         // u6: rate of coring for sad(theta) - sad(theta+pi/2)*rate/64
//Bit 23:22 reserved
//Bit 21:16 reg_sr3_lti_sad_core_rate        // u6: rate of coring for sad(theta) - sad(theta+pi/2)*rate/64 , default= 6
//Bit 15:14 reserved
//Bit 13:8  reg_sr3_cti_sad_core_rate        // u6: rate of coring for sad(theta) - sad(theta+pi/2)*rate/64 , default= 6
//Bit 7,    reg_sr3_lti_hsad_mode            // u1: mode for hsad of lti caluclation; 0: block based; 1:othor shape; default= 1
//Bit 6,    reg_sr3_cti_hsad_mode            // u1: mode for hsad of cti caluclation; 0: block based; 1:othor shape; default= 1
//Bit 5,    reg_sr3_lti_dsad_mode            // u1: mode for dsad of lti caluclation, 0: block based; 1:othor shape; default= 1
//Bit 4,    reg_sr3_cti_dsad_mode            // u1: mode for dsad of cti caluclation, 0: block based; 1:othor shape; default= 1
//Bit 3,    reg_sr3_lti_vsad_mode            // u1: mode for vsad of lti caluclation, 0: block based; 1:othor shape; default= 1
//Bit 2,    reg_sr3_cti_vsad_mode            // u1: mode for vsad of cti caluclation, 0: block based; 1:othor shape; default= 1
//Bit 1,    reg_sr3_lti_hsad_hlpf            // u1: hlpf for hsad of lti caluclation, 0: no hlpf; 1: with [1 2 1] hlpf; default= 1
//Bit 0,    reg_sr3_cti_hsad_hlpf            // u1: hlpf for hsad of cti caluclation, 0: no hlpf; 1: with [1 2 1] hlpf; default= 1
#define SHARP_SR3_PK_CTRL0                         ((0x3262  << 2) + 0xff900000)
//Bit 31:12 reserved
//Bit 11,   reg_sr3_pk_sad_mode              // u1: mode for sad of peaking and noise reduction, 0: block based; 1:othor shape; default= 1
//Bit 10,   reg_sr3_pk_hsad_hlpf             // u1: hlpf for hsad for peaking caluclation, 0: no hlpf; 1: with [1 2 2 2 1] hlpf; default= 1
//Bit 9,    reg_sr3_pk_vsad_hlpf             // u1: hlpf for vsad for peaking caluclation, 0: no hlpf; 1: with [1 2 2 2 1] hlpf; default= 1
//Bit 8,    reg_sr3_pk_dsad_hlpf             // u1: hlpf for dsad for peaking caluclation, 0: no hlpf; 1: with [1 2 2 2 1] hlpf; default= 1
//Bit 7:6,  reg_sr3_pk_hpdrt_mode            // u2: mode for HPdrt filter:  default= 3
//Bit 5:4,  reg_sr3_pk_bpdrt_mode            // u2: mode for BPdrt filter:  default= 3
//Bit 3:2,  reg_sr3_pk_drtbld_range          // u2: range of the min2 and min direction distance; default =1
//Bit 1,    reserved
//Bit 0,    reg_sr3_pk_ti_blend_mode         // u1: blend mode of the TI and PK results: default = 0;
#define SHARP_SR3_PK_CTRL1                         ((0x3263  << 2) + 0xff900000)
//Bit 31,     reserved
//Bit 30:28,  reg_sr3_pk_hp_hvcon_replace8_maxsad     //u3: replace HP hvcon by maxsad, default =1
//Bit 27,     reserved
//Bit 26:24,  reg_sr3_pk_bp_hvcon_replace8_maxsad     //u3: replace HP hvcon by maxsad, default =1
//Bit 23:16,  reg_sr3_pk_hp_hvcon_replace8lv_gain     //u8: gain to local variant before calculating the hv gain for peaking, normalized to 32 as "1" default = 32;
//Bit 15:8,   reg_sr3_pk_bp_hvcon_replace8lv_gain     //u8: gain to local variant before calculating the hv gain for peaking, normalized to 32 as "1" default = 32;
//Bit 7,      reg_sr3_sad_intlev_mode                 //u1: interleave detection xerr mode: 0 max; 1:sum default=1
//Bit 6,      reg_sr3_sad_intlev_mode1                //u1: mode 1 of using diagonal protection: 0: no digonal protection; 1: with diagonal protection default=1
//Bit 5:0,    reg_sr3_sad_intlev_gain                 //u6: interleave detection for sad gain applied, normalized to 8 as 1  default=12
#define SHARP_DEJ_CTRL                             ((0x3264  << 2) + 0xff900000)
//Bit 31:4    reserved
//Bit 3:2,    reg_sr3_dejaggy_sameside_prtct   // u2:  enable of sr3 dejaggy same side curve protect from filter, [0] for proc, [1] for ctrl path,  default=3
//Bit 1,      reg_sr3_dejaggy_sameside_mode    // u1: mode of the sameside flag decision: default =1
//Bit 0,      reg_sr3_dejaggy_enable           // u1: enable of sr3 dejaggy: default =0
#define SHARP_DEJ_ALPHA                            ((0x3265  << 2) + 0xff900000)
//Bit 31:28,  reg_sr3_dejaggy_ctrlchrm_alpha_1  //u4: alpha for LR video LPF,  default = 0
//Bit 27:24,  reg_sr3_dejaggy_ctrlchrm_alpha_0  //u4: alpha for LR video LPF,  default = 15
//Bit 23:20,  reg_sr3_dejaggy_ctrlluma_alpha_1  //u4: alpha for LR video LPF,  default = 0
//Bit 19:16,  reg_sr3_dejaggy_ctrlluma_alpha_0  //u4: alpha for LR video LPF,  default = 15
//Bit 15:12,  reg_sr3_dejaggy_procchrm_alpha_1  //u4: alpha for LR video LPF,  default = 4
//Bit 11:8,   reg_sr3_dejaggy_procchrm_alpha_0  //u4: alpha for LR video LPF,  default = 6
//Bit 7:4,    reg_sr3_dejaggy_procluma_alpha_1  //u4: alpha for LR video LPF,  default = 4
//Bit 3:0,    reg_sr3_dejaggy_procluma_alpha_0  //u4: alpha for LR video LPF,  default = 6
#define SHARP_SR3_DRTLPF_EN                        ((0x3266  << 2) + 0xff900000)
//Bit 31:15   reserved
//Bit 14:8,   reg_pk_debug_edge                . unsigned  , default = 0
//Bit  7,     reserved
//Bit  6:4,   reg_sr3_drtlpf_theta_en           //u1x3 theta (pure vertical and horizontal HF burst protection) enable. 0: not enable, 1:enable protection
//Bit  3,     reserved
//Bit  2:0    reg_sr3_drtlpf_enable             //u1x3 directional lpf on luma U and V channels, default = 7
#define SHARP_SR3_DRTLPF_ALPHA_0                   ((0x3267  << 2) + 0xff900000)
//Bit 31:30   reserved
//Bit 29:24   reg_sr3_drtlpf_alpha3             //u6: directional lpf alpha coef for min_sad/max_sad comparied, default = 9
//Bit 23:22   reserved
//Bit 21:16   reg_sr3_drtlpf_alpha2             //u6: default =10
//Bit 15:14   reserved
//Bit 13:8    reg_sr3_drtlpf_alpha1             //u6: default = 11
//Bit 7:6     reserved
//Bit 5:0     reg_sr3_drtlpf_alpha0             //u6: default = 12
#define SHARP_SR3_DRTLPF_ALPHA_1                   ((0x3268  << 2) + 0xff900000)
//Bit 31:30   reserved
//Bit 29:24   reg_sr3_drtlpf_alpha7             //u6: directional lpf alpha coef for min_sad/max_sad comparied, default = 1
//Bit 23:22   reserved
//Bit 21:16   reg_sr3_drtlpf_alpha6             //u6: default = 4
//Bit 15:14   reserved
//Bit 13:8    reg_sr3_drtlpf_alpha5             //u6: default = 7
//Bit 7:6     reserved
//Bit 5:0     reg_sr3_drtlpf_alpha4             //u6: default = 8
#define SHARP_SR3_DRTLPF_ALPHA_2                   ((0x3269  << 2) + 0xff900000)
//Bit 31:30   reserved
//Bit 29:24   reg_sr3_drtlpf_alpha11            //u6: directional lpf alpha coef for min_sad/max_sad comparied, default = 0
//Bit 23:22   reserved
//Bit 21:16   reg_sr3_drtlpf_alpha10            //u6: default = 0
//Bit 15:14   reserved
//Bit 13:8    reg_sr3_drtlpf_alpha9             //u6: default = 0
//Bit 7:6     reserved
//Bit 5:0     reg_sr3_drtlpf_alpha8             //u6: default = 0
#define SHARP_SR3_DRTLPF_ALPHA_OFST                ((0x326a  << 2) + 0xff900000)
//Bit 31:28   reg_sr3_drtlpf_alpha_ofst7        //s4: directional lpf alpha coef ofset of each directions, default = -8
//Bit 27:24   reg_sr3_drtlpf_alpha_ofst6        //s4: default = -8
//Bit 23:20   reg_sr3_drtlpf_alpha_ofst5        //s4: default = -8
//Bit 19:16   reg_sr3_drtlpf_alpha_ofst4        //s4: default = -8
//Bit 15:12   reg_sr3_drtlpf_alpha_ofst3        //s4: default = -8
//Bit 11:8    reg_sr3_drtlpf_alpha_ofst2        //s4: default = -8
//Bit 7:4     reg_sr3_drtlpf_alpha_ofst1        //s4: default = -8
//Bit 3:0     reg_sr3_drtlpf_alpha_ofst0        //s4: default = -8
#define SHARP_SR3_DERING_CTRL                      ((0x326b  << 2) + 0xff900000)
//Bit 31      reserved
//Bit 30:28   reg_sr3_dering_enable                  // u3: dering enable bits; default = 1
//Bit 27      reserved
//Bit 26:24   reg_sr3_dering_varlpf_mode             // u3: local variant LPF mode: 0 no filter, 1, errosion 3x3; 2: 3x3 lpf; 3 and up: 3x3 errosion + lpf default = 3
//Bit 23:20   reg_sr3_dering_maxrange                // u4: maximum:range of dering in LR resolution, max to 12;  default = 9
//Bit 19:18   reserved
//Bit 17:16   reg_sr3_dering_lcvar_blend_mode        // u2: mode for lcvar calculation: 0: HVblend; 1: diagblend; 2: HVblend+V (for hring); 3: HVblend+ DiagBlend default = 2
//Bit 15:8    reg_sr3_dering_lcvar_gain              // u8: gain to local variant and normalized to 32 as "1"  default = 64
//Bit 7:0     reg_sr3_dering_lcvar_nearby_maxsad_th  // u8: threshold to use nearer side maxsad if that side sad is larger than this threshold, ortherwise, use the max one default = 28
#define SHARP_SR3_DERING_LUMA2PKGAIN_0TO3          ((0x326c  << 2) + 0xff900000)
//Bit 31:24   reg_sr3_dering_luma2pkgain3             // u8: level limit(for th0<bpcon<th1) of curve for dering pkgain based on LPF luma level. default=255
//Bit 23:16   reg_sr3_dering_luma2pkgain2             // u8: level limit(for bpcon<th0) of curve for dering pkgain based on LPF luma level. default=255
//Bit 15:8    reg_sr3_dering_luma2pkgain1             // u8: threshold1 of curve for dering pkgain based on LPF luma level  default =200
//Bit 7:0     reg_sr3_dering_luma2pkgain0             // u8: threshold0 of curve for dering pkgain based on LPF luma level. default =30
#define SHARP_SR3_DERING_LUMA2PKGAIN_4TO6          ((0x326d  << 2) + 0xff900000)
//Bit 31:24   reserved
//Bit 23:16   reg_sr3_dering_luma2pkgain6             // u8: rate1 (for bpcon>th1) of curve for dering pkgain based on LPF luma level. default =24
//Bit 15:8    reg_sr3_dering_luma2pkgain5             // u8: rate0 (for bpcon<th0) of curve for dering pkgain based on LPF luma level. dfault =50
//Bit 7:0     reg_sr3_dering_luma2pkgain4             // u8: level limit(for bpcon>th1) of curve for dering pkgain based on LPF luma level. default =255
#define SHARP_SR3_DERING_LUMA2PKOS_0TO3            ((0x326e  << 2) + 0xff900000)
//Bit 31:24   reg_sr3_dering_luma2pkos3             // u8: level limit(for th0<bpcon<th1) of curve for dering pkOS based on LPF luma level. default=255
//Bit 23:16   reg_sr3_dering_luma2pkos2             // u8: level limit(for bpcon<th0) of curve for dering pkOS based on LPF luma level. default=255
//Bit 15:8    reg_sr3_dering_luma2pkos1             // u8: threshold1 of curve for dering pkOS based on LPF luma level  default =200
//Bit 7:0     reg_sr3_dering_luma2pkos0             // u8: threshold0 of curve for dering pkOS based on LPF luma leve. default =30
#define SHARP_SR3_DERING_LUMA2PKOS_4TO6            ((0x326f  << 2) + 0xff900000)
//Bit 31:24   reserved
//Bit 23:16   reg_sr3_dering_luma2pkos6             // u8: rate1 (for bpcon>th1) of curve for dering pkOS based on LPF luma level. default =24
//Bit 15:8    reg_sr3_dering_luma2pkos5             // u8: rate0 (for bpcon<th0) of curve for dering pkOS based on LPF luma level. dfault =50
//Bit 7:0     reg_sr3_dering_luma2pkos4             // u8: level limit(for bpcon>th1) of curve for dering pkOS based on LPF luma level. default =255
#define SHARP_SR3_DERING_GAINVS_MADSAD             ((0x3270  << 2) + 0xff900000)
//Bit 31:28   reg_sr3_dering_gainvs_maxsad7        //u4: pkgain vs maxsad value, 8 node interpolations, default = 0
//Bit 27:24   reg_sr3_dering_gainvs_maxsad6        //u4: default = 0
//Bit 23:20   reg_sr3_dering_gainvs_maxsad5        //u4: default = 0
//Bit 19:16   reg_sr3_dering_gainvs_maxsad4        //u4: default = 0
//Bit 15:12   reg_sr3_dering_gainvs_maxsad3        //u4: default = 0
//Bit 11:8    reg_sr3_dering_gainvs_maxsad2        //u4: default = 0
//Bit 7:4     reg_sr3_dering_gainvs_maxsad1        //u4: default = 4
//Bit 3:0     reg_sr3_dering_gainvs_maxsad0        //u4: default = 8
#define SHARP_SR3_DERING_GAINVS_VR2MAX             ((0x3271  << 2) + 0xff900000)
//Bit 31:28   reg_sr3_dering_gainvs_vr2max7        //u4: pkgain vs ratio = max(local_var, floor)/maxsad nearby, default = 15
//Bit 27:24   reg_sr3_dering_gainvs_vr2max6        //u4: default = 15
//Bit 23:20   reg_sr3_dering_gainvs_vr2max5        //u4: default = 15
//Bit 19:16   reg_sr3_dering_gainvs_vr2max4        //u4: default = 15
//Bit 15:12   reg_sr3_dering_gainvs_vr2max3        //u4: default = 14
//Bit 11:8    reg_sr3_dering_gainvs_vr2max2        //u4: default = 12
//Bit 7:4     reg_sr3_dering_gainvs_vr2max1        //u4: default = 2
//Bit 3:0     reg_sr3_dering_gainvs_vr2max0        //u4: default = 0
#define SHARP_SR3_DERING_PARAM0                    ((0x3272  << 2) + 0xff900000)
//Bit 31:24   reserved
//Bit 23:16   reg_sr3_dering_lcvar_floor        //u8: local varianet no smaller than this value to calculate dgain max(localvar,x)/maxsad. default = 10
//Bit 15:8    reg_sr3_dering_vr2max_gain        //u8: gain to max(local_var, floor)/maxsad  before feeding to LUT. default = 32
//Bit 7:6     reserved
//Bit 5:0     reg_sr3_dering_vr2max_limt        //u6: limit of maxsad to max(local_var, floor)*(max(maxsad, lmit))/maxsad.  default = 16
#define SHARP_SR3_DRTLPF_THETA                     ((0x3273  << 2) + 0xff900000)
//Bit 31:0    reg_sr3_drtlpf_theta              //u4x8: directional lpf beta coef for min_sad/min2_sad compared to x=0:7 correspond to[1:8]/16;  0 means no drtLPF, 15: 100% alpha dependant drtLPF
#define SHARP_SATPRT_CTRL                          ((0x3274  << 2) + 0xff900000)
//Bit 31:24   reserved
//Bit 23:16   reg_satprt_sat_core      //u8: 4x will be coring to cor(irgb_max-irgb_min) to calculate the oy_delt, the smaller the more protection to color, the larger only the rich color will be protected;
//Bit 15:8    reg_satprt_sat_rate      //u8: rate to cor(irgb_max-irgb_min) to calculate the oy_delt, the larger the more protection to rich color; norm 16 as 1
//Bit 7:4     reserved
//Bit 3:2     reg_satprt_csc_mode      //u2: csc mode of current yuv input: 0:601, 1:709, 2:BT2020 NCL, 3:reserved
//Bit 1       reg_satprt_is_lmt        //u1: flag telling the YUV is limited range data or full range data, 0 full range, 1: limited range
//Bit 0       reg_satprt_enable        //u1: enable of saturation protection for dnlp adjustments
#define SHARP_SATPRT_DIVM                          ((0x3275  << 2) + 0xff900000)
//Bit 31:24   reserved
//Bit 23:0    reg_satprt_div_m        //u8x3, 1/m, normalized to 128 as 1, default=1
#define SHARP_SATPRT_LMT_RGB                       ((0x3276  << 2) + 0xff900000)
//Bit 31:30   reserved
//Bit 29:0    reg_satprt_lmt_rgb      //u10x3, limit of the rgb channel, for limited range RGB, set to 960, otherwise set to 1023
#define SHARP_DB_FLT_CTRL                          ((0x3277  << 2) + 0xff900000)
//Bit 31:27        reserved
//Bit 26           reg_nrdeband_reset1
//Bit 25           reg_nrdeband_reset0
//Bit 24           reg_nrdeband_rgb          // unsigned , default = 0  0:yuv 1:RGB
//Bit 23           reg_nrdeband_en11         // unsigned , default = 1  debanding registers of side lines, [0] for luma,   same for below
//Bit 22           reg_nrdeband_en10         // unsigned , default = 1  debanding registers of side lines, [1] for chroma, same for below
//Bit 21           reg_nrdeband_siderand     // unsigned , default = 1  options to use side two lines use the rand, instead of use for the YUV three component of middle line, 0: seed[3]/bandrand[3] for middle line yuv; 1: seed[3]/bandrand[3] for nearby three lines Y;
//Bit 20           reg_nrdeband_randmode     // unsigned , default = 0  mode of rand noise adding, 0: same noise strength for all difs; else: strenght of noise will not exceed the difs, MIN((pPKReg->reg_nrdeband_bandrand[m]), noise[m])
//Bit 19:17        reg_nrdeband_bandrand2    // unsigned , default = 6
//Bit 16            reserved
//Bit 15:13        reg_nrdeband_bandrand1    // unsigned , default = 6
//Bit 12            reserved
//Bit 11: 9        reg_nrdeband_bandrand0    // unsigned , default = 6
//Bit  8            reserved
//Bit  7           reg_nrdeband_hpxor1       // unsigned , default = 1   debanding random hp portion xor, [0] for luma
//Bit  6           reg_nrdeband_hpxor0       // unsigned , default = 1   debanding random hp portion xor, [1] for chroma
//Bit  5           reg_nrdeband_en1          // unsigned , default = 1   debanding registers,  for luma
//Bit  4           reg_nrdeband_en0          // unsigned , default = 1   debanding registers,  for chroma
//Bit  3: 2        reg_nrdeband_lpf_mode1    // unsigned , default = 2   lpf mode, 0: 3x3, 1:3x5; 2: 5x5; 3:5x7
//Bit  1: 0        reg_nrdeband_lpf_mode0    // unsigned , default = 2   lpf mode, 0: 3x3, 1:3x5; 2: 5x5; 3:5x7
#define SHARP_DB_FLT_YC_THRD                       ((0x3278  << 2) + 0xff900000)
//Bit 31:28        reg_nrdeband_luma_th3     // unsigned , default = 9   threshold to |Y-Ylpf|, if < th[0] use lpf
//Bit 27:24        reg_nrdeband_luma_th2     // unsigned , default = 7   elseif <th[1] use (lpf*3 + y)/4
//Bit 23:20        reg_nrdeband_luma_th1     // unsigned , default = 6   elseif <th[1] use (lpf*3 + y)/4elseif <th[2] (lpf*1 + y)/2
//Bit 19:16        reg_nrdeband_luma_th0     // unsigned , default = 5   elseif <th[1] use (lpf*3 + y)/4elseif elseif <th[3] (lpf*1 + 3*y)/4; else
//Bit 15:12        reg_nrdeband_chrm_th3     // unsigned , default = 9   threshold to |Y-Ylpf|, if < th[0] use lpf
//Bit 11: 8        reg_nrdeband_chrm_th2     // unsigned , default = 7   elseif <th[1] use (lpf*3 + y)/4
//Bit  7: 4        reg_nrdeband_chrm_th1     // unsigned , default = 6   elseif <th[1] use (lpf*3 + y)/4elseif <th[2] (lpf*1 + y)/2
//Bit  3: 0        reg_nrdeband_chrm_th0     // unsigned , default = 5   elseif <th[1] use (lpf*3 + y)/4elseif elseif
#define SHARP_DB_FLT_RANDLUT                       ((0x3279  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:21        reg_nrdebandslut7         // unsigned , default = 1   lut0
//Bit 20:18        reg_nrdebandslut6         // unsigned , default = 1   lut0
//Bit 17:15        reg_nrdebandslut5         // unsigned , default = 1   lut0
//Bit 14:12        reg_nrdebandslut4         // unsigned , default = 1   lut0
//Bit 11: 9        reg_nrdebandslut3         // unsigned , default = 1   lut0
//Bit  8: 6        reg_nrdebandslut2         // unsigned , default = 1   lut0
//Bit  5: 3        reg_nrdebandslut1         // unsigned , default = 1   lut0
//Bit  2: 0        reg_nrdebandslut0         // unsigned , default = 1   lut0
#define SHARP_DB_FLT_PXI_THRD                      ((0x327a  << 2) + 0xff900000)
//Bit 31:26        reserved
//Bit 25:16        reg_nrdeband_yc_th1       // unsigned , default = 0   to luma/|u/v| for using the denoise
//Bit 15:10        reserved
//Bit  9: 0        reg_nrdeband_yc_th0       // unsigned , default = 0   to luma/|u/v| for using the denoise
#define SHARP_DB_FLT_SEED_Y                        ((0x327b  << 2) + 0xff900000)
//Bit 31: 0        reg_nrdeband_seed0        // unsigned , default = 1621438240  noise adding seed for Y. seed[0]= 0x60a52f20; as default
#define SHARP_DB_FLT_SEED_U                        ((0x327c  << 2) + 0xff900000)
//Bit 31: 0        reg_nrdeband_seed1        // unsigned , default = 1621438247  noise adding seed for U. seed[0]= 0x60a52f27; as default
#define SHARP_DB_FLT_SEED_V                        ((0x327d  << 2) + 0xff900000)
//Bit 31: 0        reg_nrdeband_seed2        // unsigned , default = 1621438242  noise adding seed for V. seed[0]= 0x60a52f22; as default
#define SHARP_PKGAIN_VSLUMA_LUT_L                  ((0x327e  << 2) + 0xff900000)
//Bit 31:28       reg_pkgain_vsluma_lut7;
//Bit 27:24       reg_pkgain_vsluma_lut6;
//Bit 23:20       reg_pkgain_vsluma_lut5;
//Bit 19:16       reg_pkgain_vsluma_lut4;
//Bit 15:12       reg_pkgain_vsluma_lut3;
//Bit 11: 8       reg_pkgain_vsluma_lut2;
//Bit  7: 4       reg_pkgain_vsluma_lut1;
//Bit  3: 0       reg_pkgain_vsluma_lut0;
#define SHARP_PKGAIN_VSLUMA_LUT_H                  ((0x327f  << 2) + 0xff900000)
//Bit 31: 4       reserved;
//Bit  3: 0       reg_pkgain_vsluma_lut8;
#define SHARP_PKOSHT_VSLUMA_LUT_L                  ((0x3203  << 2) + 0xff900000)
//Bit 31:28       reg_pkosht_vsluma_lut7;
//Bit 27:24       reg_pkosht_vsluma_lut6;
//Bit 23:20       reg_pkosht_vsluma_lut5;
//Bit 19:16       reg_pkosht_vsluma_lut4;
//Bit 15:12       reg_pkosht_vsluma_lut3;
//Bit 11: 8       reg_pkosht_vsluma_lut2;
//Bit  7: 4       reg_pkosht_vsluma_lut1;
//Bit  3: 0       reg_pkosht_vsluma_lut0;
#define SHARP_PKOSHT_VSLUMA_LUT_H                  ((0x3204  << 2) + 0xff900000)
//Bit 31: 4       reserved;
//Bit  3: 0       reg_pkosht_vsluma_lut8;
//
// Closing file:  sharp_regs.h
//

#define SRSHARP0_SHARP_HVSIZE                      (SRSHARP0_OFFSET + SHARP_HVSIZE                 )  //0x00  //
#define SRSHARP0_SHARP_HVBLANK_NUM                 (SRSHARP0_OFFSET + SHARP_HVBLANK_NUM            )  //0x01  //
#define SRSHARP0_NR_GAUSSIAN_MODE                  (SRSHARP0_OFFSET + NR_GAUSSIAN_MODE             )  //0x02  //
//`define SRSHARP0_PK_HVCON_LPF_MODE                 (`SRSHARP0_OFFSET + `PK_HVCON_LPF_MODE            )  //8'h03  //
//`define SRSHARP0_PK_CON_BLEND_GAIN                 (`SRSHARP0_OFFSET + `PK_CON_BLEND_GAIN            )  //8'h04  //
#define SRSHARP0_PK_CON_2CIRHPGAIN_TH_RATE         (SRSHARP0_OFFSET + PK_CON_2CIRHPGAIN_TH_RATE    )  //0x05  //
#define SRSHARP0_PK_CON_2CIRHPGAIN_LIMIT           (SRSHARP0_OFFSET + PK_CON_2CIRHPGAIN_LIMIT      )  //0x06  //
#define SRSHARP0_PK_CON_2CIRBPGAIN_TH_RATE         (SRSHARP0_OFFSET + PK_CON_2CIRBPGAIN_TH_RATE    )  //0x07  //
#define SRSHARP0_PK_CON_2CIRBPGAIN_LIMIT           (SRSHARP0_OFFSET + PK_CON_2CIRBPGAIN_LIMIT      )  //0x08  //
#define SRSHARP0_PK_CON_2DRTHPGAIN_TH_RATE         (SRSHARP0_OFFSET + PK_CON_2DRTHPGAIN_TH_RATE    )  //0x09  //
#define SRSHARP0_PK_CON_2DRTHPGAIN_LIMIT           (SRSHARP0_OFFSET + PK_CON_2DRTHPGAIN_LIMIT      )  //0x0a  //
#define SRSHARP0_PK_CON_2DRTBPGAIN_TH_RATE         (SRSHARP0_OFFSET + PK_CON_2DRTBPGAIN_TH_RATE    )  //0x0b  //
#define SRSHARP0_PK_CON_2DRTBPGAIN_LIMIT           (SRSHARP0_OFFSET + PK_CON_2DRTBPGAIN_LIMIT      )  //0x0c  //
#define SRSHARP0_PK_CIRFB_LPF_MODE                 (SRSHARP0_OFFSET + PK_CIRFB_LPF_MODE            )  //0x0d  //
#define SRSHARP0_PK_DRTFB_LPF_MODE                 (SRSHARP0_OFFSET + PK_DRTFB_LPF_MODE            )  //0x0e  //
#define SRSHARP0_PK_CIRFB_HP_CORING                (SRSHARP0_OFFSET + PK_CIRFB_HP_CORING           )  //0x0f  //
#define SRSHARP0_PK_CIRFB_BP_CORING                (SRSHARP0_OFFSET + PK_CIRFB_BP_CORING           )  //0x10  //
#define SRSHARP0_PK_DRTFB_HP_CORING                (SRSHARP0_OFFSET + PK_DRTFB_HP_CORING           )  //0x11  //
#define SRSHARP0_PK_DRTFB_BP_CORING                (SRSHARP0_OFFSET + PK_DRTFB_BP_CORING           )  //0x12  //
#define SRSHARP0_PK_CIRFB_BLEND_GAIN               (SRSHARP0_OFFSET + PK_CIRFB_BLEND_GAIN          )  //0x13  //
#define SRSHARP0_NR_ALPY_SSD_GAIN_OFST             (SRSHARP0_OFFSET + NR_ALPY_SSD_GAIN_OFST        )  //0x14  //
#define SRSHARP0_NR_ALP0Y_ERR2CURV_TH_RATE         (SRSHARP0_OFFSET + NR_ALP0Y_ERR2CURV_TH_RATE    )  //0x15  //
#define SRSHARP0_NR_ALP0Y_ERR2CURV_LIMIT           (SRSHARP0_OFFSET + NR_ALP0Y_ERR2CURV_LIMIT      )  //0x16  //
#define SRSHARP0_NR_ALP0C_ERR2CURV_TH_RATE         (SRSHARP0_OFFSET + NR_ALP0C_ERR2CURV_TH_RATE    )  //0x17  //
#define SRSHARP0_NR_ALP0C_ERR2CURV_LIMIT           (SRSHARP0_OFFSET + NR_ALP0C_ERR2CURV_LIMIT      )  //0x18  //
#define SRSHARP0_NR_ALP0_MIN_MAX                   (SRSHARP0_OFFSET + NR_ALP0_MIN_MAX              )  //0x19  //
#define SRSHARP0_NR_ALP1_MIERR_CORING              (SRSHARP0_OFFSET + NR_ALP1_MIERR_CORING         )  //0x1a  //
#define SRSHARP0_NR_ALP1_ERR2CURV_TH_RATE          (SRSHARP0_OFFSET + NR_ALP1_ERR2CURV_TH_RATE     )  //0x1b  //
#define SRSHARP0_NR_ALP1_ERR2CURV_LIMIT            (SRSHARP0_OFFSET + NR_ALP1_ERR2CURV_LIMIT       )  //0x1c  //
#define SRSHARP0_NR_ALP1_MIN_MAX                   (SRSHARP0_OFFSET + NR_ALP1_MIN_MAX              )  //0x1d  //
#define SRSHARP0_PK_ALP2_MIERR_CORING              (SRSHARP0_OFFSET + PK_ALP2_MIERR_CORING         )  //0x1e  //
#define SRSHARP0_PK_ALP2_ERR2CURV_TH_RATE          (SRSHARP0_OFFSET + PK_ALP2_ERR2CURV_TH_RATE     )  //0x1f  //
#define SRSHARP0_PK_ALP2_ERR2CURV_LIMIT            (SRSHARP0_OFFSET + PK_ALP2_ERR2CURV_LIMIT       )  //0x20  //
#define SRSHARP0_PK_ALP2_MIN_MAX                   (SRSHARP0_OFFSET + PK_ALP2_MIN_MAX              )  //0x21  //
#define SRSHARP0_PK_FINALGAIN_HP_BP                (SRSHARP0_OFFSET + PK_FINALGAIN_HP_BP           )  //0x22  //
#define SRSHARP0_PK_OS_HORZ_CORE_GAIN              (SRSHARP0_OFFSET + PK_OS_HORZ_CORE_GAIN         )  //0x23  //
#define SRSHARP0_PK_OS_VERT_CORE_GAIN              (SRSHARP0_OFFSET + PK_OS_VERT_CORE_GAIN         )  //0x24  //
#define SRSHARP0_PK_OS_ADPT_MISC                   (SRSHARP0_OFFSET + PK_OS_ADPT_MISC              )  //0x25  //
#define SRSHARP0_PK_OS_STATIC                      (SRSHARP0_OFFSET + PK_OS_STATIC                 )  //0x26  //
#define SRSHARP0_PK_NR_ENABLE                      (SRSHARP0_OFFSET + PK_NR_ENABLE                 )  //0x27  //
#define SRSHARP0_PK_DRT_SAD_MISC                   (SRSHARP0_OFFSET + PK_DRT_SAD_MISC              )  //0x28  //
#define SRSHARP0_NR_TI_DNLP_BLEND                  (SRSHARP0_OFFSET + NR_TI_DNLP_BLEND             )  //0x29  //

#define SRSHARP0_LTI_DIR_CORE_ALPHA                (SRSHARP0_OFFSET + LTI_DIR_CORE_ALPHA           )  //0x2a  //
#define SRSHARP0_CTI_DIR_ALPHA                     (SRSHARP0_OFFSET + CTI_DIR_ALPHA                )  //0x2b  //
#define SRSHARP0_LTI_CTI_DF_GAIN                   (SRSHARP0_OFFSET + LTI_CTI_DF_GAIN              )  //0x2c  //
#define SRSHARP0_LTI_CTI_DIR_AC_DBG                (SRSHARP0_OFFSET + LTI_CTI_DIR_AC_DBG           )  //0x2d  //
#define SRSHARP0_HCTI_FLT_CLP_DC                   (SRSHARP0_OFFSET + HCTI_FLT_CLP_DC              )  //0x2e  //
#define SRSHARP0_HCTI_BST_GAIN                     (SRSHARP0_OFFSET + HCTI_BST_GAIN                )  //0x2f  //
#define SRSHARP0_HCTI_BST_CORE                     (SRSHARP0_OFFSET + HCTI_BST_CORE                )  //0x30  //
#define SRSHARP0_HCTI_CON_2_GAIN_0                 (SRSHARP0_OFFSET + HCTI_CON_2_GAIN_0            )  //0x31  //
#define SRSHARP0_HCTI_CON_2_GAIN_1                 (SRSHARP0_OFFSET + HCTI_CON_2_GAIN_1            )  //0x32  //
#define SRSHARP0_HCTI_OS_MARGIN                    (SRSHARP0_OFFSET + HCTI_OS_MARGIN               )  //0x33  //
#define SRSHARP0_HLTI_FLT_CLP_DC                   (SRSHARP0_OFFSET + HLTI_FLT_CLP_DC              )  //0x34  //
#define SRSHARP0_HLTI_BST_GAIN                     (SRSHARP0_OFFSET + HLTI_BST_GAIN                )  //0x35  //
#define SRSHARP0_HLTI_BST_CORE                     (SRSHARP0_OFFSET + HLTI_BST_CORE                )  //0x36  //
#define SRSHARP0_HLTI_CON_2_GAIN_0                 (SRSHARP0_OFFSET + HLTI_CON_2_GAIN_0            )  //0x37  //
#define SRSHARP0_HLTI_CON_2_GAIN_1                 (SRSHARP0_OFFSET + HLTI_CON_2_GAIN_1            )  //0x38  //
#define SRSHARP0_HLTI_OS_MARGIN                    (SRSHARP0_OFFSET + HLTI_OS_MARGIN               )  //0x39  //
#define SRSHARP0_VLTI_FLT_CON_CLP                  (SRSHARP0_OFFSET + VLTI_FLT_CON_CLP             )  //0x3a  //
#define SRSHARP0_VLTI_BST_GAIN                     (SRSHARP0_OFFSET + VLTI_BST_GAIN                )  //0x3b  //
#define SRSHARP0_VLTI_BST_CORE                     (SRSHARP0_OFFSET + VLTI_BST_CORE                )  //0x3c  //
#define SRSHARP0_VLTI_CON_2_GAIN_0                 (SRSHARP0_OFFSET + VLTI_CON_2_GAIN_0            )  //0x3d  //
#define SRSHARP0_VLTI_CON_2_GAIN_1                 (SRSHARP0_OFFSET + VLTI_CON_2_GAIN_1            )  //0x3e  //
#define SRSHARP0_VCTI_FLT_CON_CLP                  (SRSHARP0_OFFSET + VCTI_FLT_CON_CLP             )  //0x3f  //
#define SRSHARP0_VCTI_BST_GAIN                     (SRSHARP0_OFFSET + VCTI_BST_GAIN                )  //0x40  //
#define SRSHARP0_VCTI_BST_CORE                     (SRSHARP0_OFFSET + VCTI_BST_CORE                )  //0x41  //
#define SRSHARP0_VCTI_CON_2_GAIN_0                 (SRSHARP0_OFFSET + VCTI_CON_2_GAIN_0            )  //0x42  //
#define SRSHARP0_VCTI_CON_2_GAIN_1                 (SRSHARP0_OFFSET + VCTI_CON_2_GAIN_1            )  //0x43  //
#define SRSHARP0_SHARP_3DLIMIT                     (SRSHARP0_OFFSET + SHARP_3DLIMIT                )  //0x44  //
#define SRSHARP0_DNLP_EN                           (SRSHARP0_OFFSET + DNLP_EN                      )  //0x45  //
#define SRSHARP0_DNLP_00                           (SRSHARP0_OFFSET + DNLP_00                      )  //0x46  //
#define SRSHARP0_DNLP_01                           (SRSHARP0_OFFSET + DNLP_01                      )  //0x47  //
#define SRSHARP0_DNLP_02                           (SRSHARP0_OFFSET + DNLP_02                      )  //0x48  //
#define SRSHARP0_DNLP_03                           (SRSHARP0_OFFSET + DNLP_03                      )  //0x49  //
#define SRSHARP0_DNLP_04                           (SRSHARP0_OFFSET + DNLP_04                      )  //0x4a  //
#define SRSHARP0_DNLP_05                           (SRSHARP0_OFFSET + DNLP_05                      )  //0x4b  //
#define SRSHARP0_DNLP_06                           (SRSHARP0_OFFSET + DNLP_06                      )  //0x4c  //
#define SRSHARP0_DNLP_07                           (SRSHARP0_OFFSET + DNLP_07                      )  //0x4d  //
#define SRSHARP0_DNLP_08                           (SRSHARP0_OFFSET + DNLP_08                      )  //0x4e  //
#define SRSHARP0_DNLP_09                           (SRSHARP0_OFFSET + DNLP_09                      )  //0x4f  //
#define SRSHARP0_DNLP_10                           (SRSHARP0_OFFSET + DNLP_10                      )  //0x50  //
#define SRSHARP0_DNLP_11                           (SRSHARP0_OFFSET + DNLP_11                      )  //0x51  //
#define SRSHARP0_DNLP_12                           (SRSHARP0_OFFSET + DNLP_12                      )  //0x52  //
#define SRSHARP0_DNLP_13                           (SRSHARP0_OFFSET + DNLP_13                      )  //0x53  //
#define SRSHARP0_DNLP_14                           (SRSHARP0_OFFSET + DNLP_14                      )  //0x54  //
#define SRSHARP0_DNLP_15                           (SRSHARP0_OFFSET + DNLP_15                      )  //0x55  //
#define SRSHARP0_DEMO_CRTL                         (SRSHARP0_OFFSET + DEMO_CRTL                    )  //0x56  //
#define SRSHARP0_SHARP_SR2_CTRL                    (SRSHARP0_OFFSET + SHARP_SR2_CTRL               )  //0x57  //
#define SRSHARP0_SHARP_SR2_YBIC_HCOEF0             (SRSHARP0_OFFSET + SHARP_SR2_YBIC_HCOEF0        )  //0x58
#define SRSHARP0_SHARP_SR2_YBIC_HCOEF1             (SRSHARP0_OFFSET + SHARP_SR2_YBIC_HCOEF1        )  //0x59  //
#define SRSHARP0_SHARP_SR2_CBIC_HCOEF0             (SRSHARP0_OFFSET + SHARP_SR2_CBIC_HCOEF0        )  //0x5a  //
#define SRSHARP0_SHARP_SR2_CBIC_HCOEF1             (SRSHARP0_OFFSET + SHARP_SR2_CBIC_HCOEF1        )  //0x5b  //
#define SRSHARP0_SHARP_SR2_YBIC_VCOEF0             (SRSHARP0_OFFSET + SHARP_SR2_YBIC_VCOEF0        )  //0x5c  //
#define SRSHARP0_SHARP_SR2_YBIC_VCOEF1             (SRSHARP0_OFFSET + SHARP_SR2_YBIC_VCOEF1        )  //0x5d  //
#define SRSHARP0_SHARP_SR2_CBIC_VCOEF0             (SRSHARP0_OFFSET + SHARP_SR2_CBIC_VCOEF0        )  //0x5e  //
#define SRSHARP0_SHARP_SR2_CBIC_VCOEF1             (SRSHARP0_OFFSET + SHARP_SR2_CBIC_VCOEF1        )  //0x5f  //
#define SRSHARP0_SHARP_SR2_MISC                    (SRSHARP0_OFFSET + SHARP_SR2_MISC               )  //0x60  //
// `define SRSHARP0_SHARP_DEJ2_PRC                    (`SRSHARP0_OFFSET + `SHARP_DEJ2_PRC               )  //8'h61  //
// `define SRSHARP0_SHARP_DEJ1_PRC                    (`SRSHARP0_OFFSET + `SHARP_DEJ1_PRC               )  //8'h62  //
// `define SRSHARP0_SHARP_DEJ2_MISC                   (`SRSHARP0_OFFSET + `SHARP_DEJ2_MISC              )  //8'h63  //
// `define SRSHARP0_SHARP_DEJ1_MISC                   (`SRSHARP0_OFFSET + `SHARP_DEJ1_MISC              )  //8'h64  //
#define SRSHARP0_SR3_SAD_CTRL                   (SRSHARP0_OFFSET + SHARP_SR3_SAD_CTRL                 ) // 0x61  //
#define SRSHARP0_SR3_PK_CTRL0                   (SRSHARP0_OFFSET + SHARP_SR3_PK_CTRL0                 ) // 0x62
#define SRSHARP0_SR3_PK_CTRL1                   (SRSHARP0_OFFSET + SHARP_SR3_PK_CTRL1                 ) // 0x63
#define SRSHARP0_DEJ_CTRL                       (SRSHARP0_OFFSET + SHARP_DEJ_CTRL                     ) // 0x64
#define SRSHARP0_DEJ_ALPHA                      (SRSHARP0_OFFSET + SHARP_DEJ_ALPHA                    ) // 0x65
#define SRSHARP0_SR3_DRTLPF_EN                  (SRSHARP0_OFFSET + SHARP_SR3_DRTLPF_EN                ) // 0x66
#define SRSHARP0_SR3_DRTLPF_ALPHA_0             (SRSHARP0_OFFSET + SHARP_SR3_DRTLPF_ALPHA_0           ) // 0x67
#define SRSHARP0_SR3_DRTLPF_ALPHA_1             (SRSHARP0_OFFSET + SHARP_SR3_DRTLPF_ALPHA_1           ) // 0x68
#define SRSHARP0_SR3_DRTLPF_ALPHA_2             (SRSHARP0_OFFSET + SHARP_SR3_DRTLPF_ALPHA_2           ) // 0x69
#define SRSHARP0_SR3_DRTLPF_ALPHA_OFST          (SRSHARP0_OFFSET + SHARP_SR3_DRTLPF_ALPHA_OFST        ) // 0x6a
#define SRSHARP0_SR3_DERING_CTRL                (SRSHARP0_OFFSET + SHARP_SR3_DERING_CTRL              ) // 0x6b
#define SRSHARP0_SR3_DERING_LUMA2PKGAIN_0TO3    (SRSHARP0_OFFSET + SHARP_SR3_DERING_LUMA2PKGAIN_0TO3  ) // 0x6c
#define SRSHARP0_SR3_DERING_LUMA2PKGAIN_4TO6    (SRSHARP0_OFFSET + SHARP_SR3_DERING_LUMA2PKGAIN_4TO6  ) // 0x6d
#define SRSHARP0_SR3_DERING_LUMA2PKOS_0TO3      (SRSHARP0_OFFSET + SHARP_SR3_DERING_LUMA2PKOS_0TO3    ) // 0x6e
#define SRSHARP0_SR3_DERING_LUMA2PKOS_4TO6      (SRSHARP0_OFFSET + SHARP_SR3_DERING_LUMA2PKOS_4TO6    ) // 0x6f
#define SRSHARP0_SR3_DERING_GAINVS_MADSAD       (SRSHARP0_OFFSET + SHARP_SR3_DERING_GAINVS_MADSAD     ) // 0x70
#define SRSHARP0_SR3_DERING_GAINVS_VR2MAX       (SRSHARP0_OFFSET + SHARP_SR3_DERING_GAINVS_VR2MAX     ) // 0x71
#define SRSHARP0_SR3_DERING_PARAM0              (SRSHARP0_OFFSET + SHARP_SR3_DERING_PARAM0            ) // 0x72
#define SRSHARP0_SR3_DRTLPF_THETA               (SRSHARP0_OFFSET + SHARP_SR3_DRTLPF_THETA             ) // 0x73
#define SRSHARP0_SATPRT_CTRL                    (SRSHARP0_OFFSET + SHARP_SATPRT_CTRL                  ) // 0x74
#define SRSHARP0_SATPRT_DIVM                    (SRSHARP0_OFFSET + SHARP_SATPRT_DIVM                  ) // 0x75
#define SRSHARP0_SATPRT_LMT_RGB                 (SRSHARP0_OFFSET + SHARP_SATPRT_LMT_RGB               ) // 0x76
#define SRSHARP0_DB_FLT_CTRL                    (SRSHARP0_OFFSET + SHARP_DB_FLT_CTRL                  ) // 0x77
#define SRSHARP0_DB_FLT_YC_THRD                 (SRSHARP0_OFFSET + SHARP_DB_FLT_YC_THRD               ) // 0x78
#define SRSHARP0_DB_FLT_RANDLUT                 (SRSHARP0_OFFSET + SHARP_DB_FLT_RANDLUT               ) // 0x79
#define SRSHARP0_DB_FLT_PXI_THRD                (SRSHARP0_OFFSET + SHARP_DB_FLT_PXI_THRD              ) // 0x7a
#define SRSHARP0_DB_FLT_SEED_Y                  (SRSHARP0_OFFSET + SHARP_DB_FLT_SEED_Y                ) // 0x7b
#define SRSHARP0_DB_FLT_SEED_U                  (SRSHARP0_OFFSET + SHARP_DB_FLT_SEED_U                ) // 0x7c
#define SRSHARP0_DB_FLT_SEED_V                  (SRSHARP0_OFFSET + SHARP_DB_FLT_SEED_V                ) // 0x7d
#define SRSHARP0_PKGAIN_VSLUMA_LUT_L            (SRSHARP0_OFFSET + SHARP_PKGAIN_VSLUMA_LUT_L          ) // 0x80
#define SRSHARP0_PKGAIN_VSLUMA_LUT_H            (SRSHARP0_OFFSET + SHARP_PKGAIN_VSLUMA_LUT_H          ) // 0x81
#define SRSHARP0_PKOSHT_VSLUMA_LUT_L            (SRSHARP0_OFFSET + SHARP_PKOSHT_VSLUMA_LUT_L          ) // 0x82
#define SRSHARP0_PKOSHT_VSLUMA_LUT_H            (SRSHARP0_OFFSET + SHARP_PKOSHT_VSLUMA_LUT_H          ) // 0x83

//// srsharp1 reg define

#define SRSHARP1_SHARP_HVSIZE                      (SRSHARP1_OFFSET + SHARP_HVSIZE                 )  //0x00  //
#define SRSHARP1_SHARP_HVBLANK_NUM                 (SRSHARP1_OFFSET + SHARP_HVBLANK_NUM            )  //0x01  //
#define SRSHARP1_NR_GAUSSIAN_MODE                  (SRSHARP1_OFFSET + NR_GAUSSIAN_MODE             )  //0x02  //
//`define SRSHARP1_PK_HVCON_LPF_MODE                 (`SRSHARP1_OFFSET + `PK_HVCON_LPF_MODE            )  //8'h03  //
//`define SRSHARP1_PK_CON_BLEND_GAIN                 (`SRSHARP1_OFFSET + `PK_CON_BLEND_GAIN            )  //8'h04  //
#define SRSHARP1_PK_CON_2CIRHPGAIN_TH_RATE         (SRSHARP1_OFFSET + PK_CON_2CIRHPGAIN_TH_RATE    )  //0x05  //
#define SRSHARP1_PK_CON_2CIRHPGAIN_LIMIT           (SRSHARP1_OFFSET + PK_CON_2CIRHPGAIN_LIMIT      )  //0x06  //
#define SRSHARP1_PK_CON_2CIRBPGAIN_TH_RATE         (SRSHARP1_OFFSET + PK_CON_2CIRBPGAIN_TH_RATE    )  //0x07  //
#define SRSHARP1_PK_CON_2CIRBPGAIN_LIMIT           (SRSHARP1_OFFSET + PK_CON_2CIRBPGAIN_LIMIT      )  //0x08  //
#define SRSHARP1_PK_CON_2DRTHPGAIN_TH_RATE         (SRSHARP1_OFFSET + PK_CON_2DRTHPGAIN_TH_RATE    )  //0x09  //
#define SRSHARP1_PK_CON_2DRTHPGAIN_LIMIT           (SRSHARP1_OFFSET + PK_CON_2DRTHPGAIN_LIMIT      )  //0x0a  //
#define SRSHARP1_PK_CON_2DRTBPGAIN_TH_RATE         (SRSHARP1_OFFSET + PK_CON_2DRTBPGAIN_TH_RATE    )  //0x0b  //
#define SRSHARP1_PK_CON_2DRTBPGAIN_LIMIT           (SRSHARP1_OFFSET + PK_CON_2DRTBPGAIN_LIMIT      )  //0x0c  //
#define SRSHARP1_PK_CIRFB_LPF_MODE                 (SRSHARP1_OFFSET + PK_CIRFB_LPF_MODE            )  //0x0d  //
#define SRSHARP1_PK_DRTFB_LPF_MODE                 (SRSHARP1_OFFSET + PK_DRTFB_LPF_MODE            )  //0x0e  //
#define SRSHARP1_PK_CIRFB_HP_CORING                (SRSHARP1_OFFSET + PK_CIRFB_HP_CORING           )  //0x0f  //
#define SRSHARP1_PK_CIRFB_BP_CORING                (SRSHARP1_OFFSET + PK_CIRFB_BP_CORING           )  //0x10  //
#define SRSHARP1_PK_DRTFB_HP_CORING                (SRSHARP1_OFFSET + PK_DRTFB_HP_CORING           )  //0x11  //
#define SRSHARP1_PK_DRTFB_BP_CORING                (SRSHARP1_OFFSET + PK_DRTFB_BP_CORING           )  //0x12  //
#define SRSHARP1_PK_CIRFB_BLEND_GAIN               (SRSHARP1_OFFSET + PK_CIRFB_BLEND_GAIN          )  //0x13  //
#define SRSHARP1_NR_ALPY_SSD_GAIN_OFST             (SRSHARP1_OFFSET + NR_ALPY_SSD_GAIN_OFST        )  //0x14  //
#define SRSHARP1_NR_ALP0Y_ERR2CURV_TH_RATE         (SRSHARP1_OFFSET + NR_ALP0Y_ERR2CURV_TH_RATE    )  //0x15  //
#define SRSHARP1_NR_ALP0Y_ERR2CURV_LIMIT           (SRSHARP1_OFFSET + NR_ALP0Y_ERR2CURV_LIMIT      )  //0x16  //
#define SRSHARP1_NR_ALP0C_ERR2CURV_TH_RATE         (SRSHARP1_OFFSET + NR_ALP0C_ERR2CURV_TH_RATE    )  //0x17  //
#define SRSHARP1_NR_ALP0C_ERR2CURV_LIMIT           (SRSHARP1_OFFSET + NR_ALP0C_ERR2CURV_LIMIT      )  //0x18  //
#define SRSHARP1_NR_ALP0_MIN_MAX                   (SRSHARP1_OFFSET + NR_ALP0_MIN_MAX              )  //0x19  //
#define SRSHARP1_NR_ALP1_MIERR_CORING              (SRSHARP1_OFFSET + NR_ALP1_MIERR_CORING         )  //0x1a  //
#define SRSHARP1_NR_ALP1_ERR2CURV_TH_RATE          (SRSHARP1_OFFSET + NR_ALP1_ERR2CURV_TH_RATE     )  //0x1b  //
#define SRSHARP1_NR_ALP1_ERR2CURV_LIMIT            (SRSHARP1_OFFSET + NR_ALP1_ERR2CURV_LIMIT       )  //0x1c  //
#define SRSHARP1_NR_ALP1_MIN_MAX                   (SRSHARP1_OFFSET + NR_ALP1_MIN_MAX              )  //0x1d  //
#define SRSHARP1_PK_ALP2_MIERR_CORING              (SRSHARP1_OFFSET + PK_ALP2_MIERR_CORING         )  //0x1e  //
#define SRSHARP1_PK_ALP2_ERR2CURV_TH_RATE          (SRSHARP1_OFFSET + PK_ALP2_ERR2CURV_TH_RATE     )  //0x1f  //
#define SRSHARP1_PK_ALP2_ERR2CURV_LIMIT            (SRSHARP1_OFFSET + PK_ALP2_ERR2CURV_LIMIT       )  //0x20  //
#define SRSHARP1_PK_ALP2_MIN_MAX                   (SRSHARP1_OFFSET + PK_ALP2_MIN_MAX              )  //0x21  //
#define SRSHARP1_PK_FINALGAIN_HP_BP                (SRSHARP1_OFFSET + PK_FINALGAIN_HP_BP           )  //0x22  //
#define SRSHARP1_PK_OS_HORZ_CORE_GAIN              (SRSHARP1_OFFSET + PK_OS_HORZ_CORE_GAIN         )  //0x23  //
#define SRSHARP1_PK_OS_VERT_CORE_GAIN              (SRSHARP1_OFFSET + PK_OS_VERT_CORE_GAIN         )  //0x24  //
#define SRSHARP1_PK_OS_ADPT_MISC                   (SRSHARP1_OFFSET + PK_OS_ADPT_MISC              )  //0x25  //
#define SRSHARP1_PK_OS_STATIC                      (SRSHARP1_OFFSET + PK_OS_STATIC                 )  //0x26  //
#define SRSHARP1_PK_NR_ENABLE                      (SRSHARP1_OFFSET + PK_NR_ENABLE                 )  //0x27  //
#define SRSHARP1_PK_DRT_SAD_MISC                   (SRSHARP1_OFFSET + PK_DRT_SAD_MISC              )  //0x28  //
#define SRSHARP1_NR_TI_DNLP_BLEND                  (SRSHARP1_OFFSET + NR_TI_DNLP_BLEND             )  //0x29  //
#define SRSHARP1_LTI_DIR_CORE_ALPHA                (SRSHARP1_OFFSET + LTI_DIR_CORE_ALPHA           )  //0x2a  //
#define SRSHARP1_CTI_DIR_ALPHA                     (SRSHARP1_OFFSET + CTI_DIR_ALPHA                )  //0x2b  //
#define SRSHARP1_LTI_CTI_DF_GAIN                   (SRSHARP1_OFFSET + LTI_CTI_DF_GAIN              )  //0x2c  //
#define SRSHARP1_LTI_CTI_DIR_AC_DBG                (SRSHARP1_OFFSET + LTI_CTI_DIR_AC_DBG           )  //0x2d  //
#define SRSHARP1_HCTI_FLT_CLP_DC                   (SRSHARP1_OFFSET + HCTI_FLT_CLP_DC              )  //0x2e  //
#define SRSHARP1_HCTI_BST_GAIN                     (SRSHARP1_OFFSET + HCTI_BST_GAIN                )  //0x2f  //
#define SRSHARP1_HCTI_BST_CORE                     (SRSHARP1_OFFSET + HCTI_BST_CORE                )  //0x30  //
#define SRSHARP1_HCTI_CON_2_GAIN_0                 (SRSHARP1_OFFSET + HCTI_CON_2_GAIN_0            )  //0x31  //
#define SRSHARP1_HCTI_CON_2_GAIN_1                 (SRSHARP1_OFFSET + HCTI_CON_2_GAIN_1            )  //0x32  //
#define SRSHARP1_HCTI_OS_MARGIN                    (SRSHARP1_OFFSET + HCTI_OS_MARGIN               )  //0x33  //
#define SRSHARP1_HLTI_FLT_CLP_DC                   (SRSHARP1_OFFSET + HLTI_FLT_CLP_DC              )  //0x34  //
#define SRSHARP1_HLTI_BST_GAIN                     (SRSHARP1_OFFSET + HLTI_BST_GAIN                )  //0x35  //
#define SRSHARP1_HLTI_BST_CORE                     (SRSHARP1_OFFSET + HLTI_BST_CORE                )  //0x36  //
#define SRSHARP1_HLTI_CON_2_GAIN_0                 (SRSHARP1_OFFSET + HLTI_CON_2_GAIN_0            )  //0x37  //
#define SRSHARP1_HLTI_CON_2_GAIN_1                 (SRSHARP1_OFFSET + HLTI_CON_2_GAIN_1            )  //0x38  //
#define SRSHARP1_HLTI_OS_MARGIN                    (SRSHARP1_OFFSET + HLTI_OS_MARGIN               )  //0x39  //
#define SRSHARP1_VLTI_FLT_CON_CLP                  (SRSHARP1_OFFSET + VLTI_FLT_CON_CLP             )  //0x3a  //
#define SRSHARP1_VLTI_BST_GAIN                     (SRSHARP1_OFFSET + VLTI_BST_GAIN                )  //0x3b  //
#define SRSHARP1_VLTI_BST_CORE                     (SRSHARP1_OFFSET + VLTI_BST_CORE                )  //0x3c  //
#define SRSHARP1_VLTI_CON_2_GAIN_0                 (SRSHARP1_OFFSET + VLTI_CON_2_GAIN_0            )  //0x3d  //
#define SRSHARP1_VLTI_CON_2_GAIN_1                 (SRSHARP1_OFFSET + VLTI_CON_2_GAIN_1            )  //0x3e  //
#define SRSHARP1_VCTI_FLT_CON_CLP                  (SRSHARP1_OFFSET + VCTI_FLT_CON_CLP             )  //0x3f  //
#define SRSHARP1_VCTI_BST_GAIN                     (SRSHARP1_OFFSET + VCTI_BST_GAIN                )  //0x40  //
#define SRSHARP1_VCTI_BST_CORE                     (SRSHARP1_OFFSET + VCTI_BST_CORE                )  //0x41  //
#define SRSHARP1_VCTI_CON_2_GAIN_0                 (SRSHARP1_OFFSET + VCTI_CON_2_GAIN_0            )  //0x42  //
#define SRSHARP1_VCTI_CON_2_GAIN_1                 (SRSHARP1_OFFSET + VCTI_CON_2_GAIN_1            )  //0x43  //
#define SRSHARP1_SHARP_3DLIMIT                     (SRSHARP1_OFFSET + SHARP_3DLIMIT                )  //0x44  //
#define SRSHARP1_DNLP_EN                           (SRSHARP1_OFFSET + DNLP_EN                      )  //0x45  //
#define SRSHARP1_DNLP_00                           (SRSHARP1_OFFSET + DNLP_00                      )  //0x46  //
#define SRSHARP1_DNLP_01                           (SRSHARP1_OFFSET + DNLP_01                      )  //0x47  //
#define SRSHARP1_DNLP_02                           (SRSHARP1_OFFSET + DNLP_02                      )  //0x48  //
#define SRSHARP1_DNLP_03                           (SRSHARP1_OFFSET + DNLP_03                      )  //0x49  //
#define SRSHARP1_DNLP_04                           (SRSHARP1_OFFSET + DNLP_04                      )  //0x4a  //
#define SRSHARP1_DNLP_05                           (SRSHARP1_OFFSET + DNLP_05                      )  //0x4b  //
#define SRSHARP1_DNLP_06                           (SRSHARP1_OFFSET + DNLP_06                      )  //0x4c  //
#define SRSHARP1_DNLP_07                           (SRSHARP1_OFFSET + DNLP_07                      )  //0x4d  //
#define SRSHARP1_DNLP_08                           (SRSHARP1_OFFSET + DNLP_08                      )  //0x4e  //
#define SRSHARP1_DNLP_09                           (SRSHARP1_OFFSET + DNLP_09                      )  //0x4f  //
#define SRSHARP1_DNLP_10                           (SRSHARP1_OFFSET + DNLP_10                      )  //0x50  //
#define SRSHARP1_DNLP_11                           (SRSHARP1_OFFSET + DNLP_11                      )  //0x51  //
#define SRSHARP1_DNLP_12                           (SRSHARP1_OFFSET + DNLP_12                      )  //0x52  //
#define SRSHARP1_DNLP_13                           (SRSHARP1_OFFSET + DNLP_13                      )  //0x53  //
#define SRSHARP1_DNLP_14                           (SRSHARP1_OFFSET + DNLP_14                      )  //0x54  //
#define SRSHARP1_DNLP_15                           (SRSHARP1_OFFSET + DNLP_15                      )  //0x55  //
#define SRSHARP1_DEMO_CRTL                         (SRSHARP1_OFFSET + DEMO_CRTL                    )  //0x56  //
#define SRSHARP1_SHARP_SR2_CTRL                    (SRSHARP1_OFFSET + SHARP_SR2_CTRL               )  //0x57  //
#define SRSHARP1_SHARP_SR2_YBIC_HCOEF0             (SRSHARP1_OFFSET + SHARP_SR2_YBIC_HCOEF0        )  //0x58
#define SRSHARP1_SHARP_SR2_YBIC_HCOEF1             (SRSHARP1_OFFSET + SHARP_SR2_YBIC_HCOEF1        )  //0x59  //
#define SRSHARP1_SHARP_SR2_CBIC_HCOEF0             (SRSHARP1_OFFSET + SHARP_SR2_CBIC_HCOEF0        )  //0x5a  //
#define SRSHARP1_SHARP_SR2_CBIC_HCOEF1             (SRSHARP1_OFFSET + SHARP_SR2_CBIC_HCOEF1        )  //0x5b  //
#define SRSHARP1_SHARP_SR2_YBIC_VCOEF0             (SRSHARP1_OFFSET + SHARP_SR2_YBIC_VCOEF0        )  //0x5c  //
#define SRSHARP1_SHARP_SR2_YBIC_VCOEF1             (SRSHARP1_OFFSET + SHARP_SR2_YBIC_VCOEF1        )  //0x5d  //
#define SRSHARP1_SHARP_SR2_CBIC_VCOEF0             (SRSHARP1_OFFSET + SHARP_SR2_CBIC_VCOEF0        )  //0x5e  //
#define SRSHARP1_SHARP_SR2_CBIC_VCOEF1             (SRSHARP1_OFFSET + SHARP_SR2_CBIC_VCOEF1        )  //0x5f  //
#define SRSHARP1_SHARP_SR2_MISC                    (SRSHARP1_OFFSET + SHARP_SR2_MISC               )  //0x60  //
// `define SRSHARP1_SHARP_DEJ2_PRC                    (`SRSHARP1_OFFSET + `SHARP_DEJ2_PRC               )  //8'h61  //
// `define SRSHARP1_SHARP_DEJ1_PRC                    (`SRSHARP1_OFFSET + `SHARP_DEJ1_PRC               )  //8'h62  //
// `define SRSHARP1_SHARP_DEJ2_MISC                   (`SRSHARP1_OFFSET + `SHARP_DEJ2_MISC              )  //8'h63  //
// `define SRSHARP1_SHARP_DEJ1_MISC                   (`SRSHARP1_OFFSET + `SHARP_DEJ1_MISC              )  //8'h64  //

#define SRSHARP1_SR3_SAD_CTRL                   (SRSHARP1_OFFSET + SHARP_SR3_SAD_CTRL                 ) // 0x61  //
#define SRSHARP1_SR3_PK_CTRL0                   (SRSHARP1_OFFSET + SHARP_SR3_PK_CTRL0                 ) // 0x62
#define SRSHARP1_SR3_PK_CTRL1                   (SRSHARP1_OFFSET + SHARP_SR3_PK_CTRL1                 ) // 0x63
#define SRSHARP1_DEJ_CTRL                       (SRSHARP1_OFFSET + SHARP_DEJ_CTRL                     ) // 0x64
#define SRSHARP1_DEJ_ALPHA                      (SRSHARP1_OFFSET + SHARP_DEJ_ALPHA                    ) // 0x65
#define SRSHARP1_SR3_DRTLPF_EN                  (SRSHARP1_OFFSET + SHARP_SR3_DRTLPF_EN                ) // 0x66
#define SRSHARP1_SR3_DRTLPF_ALPHA_0             (SRSHARP1_OFFSET + SHARP_SR3_DRTLPF_ALPHA_0           ) // 0x67
#define SRSHARP1_SR3_DRTLPF_ALPHA_1             (SRSHARP1_OFFSET + SHARP_SR3_DRTLPF_ALPHA_1           ) // 0x68
#define SRSHARP1_SR3_DRTLPF_ALPHA_2             (SRSHARP1_OFFSET + SHARP_SR3_DRTLPF_ALPHA_2           ) // 0x69
#define SRSHARP1_SR3_DRTLPF_ALPHA_OFST          (SRSHARP1_OFFSET + SHARP_SR3_DRTLPF_ALPHA_OFST        ) // 0x6a
#define SRSHARP1_SR3_DERING_CTRL                (SRSHARP1_OFFSET + SHARP_SR3_DERING_CTRL              ) // 0x6b
#define SRSHARP1_SR3_DERING_LUMA2PKGAIN_0TO3    (SRSHARP1_OFFSET + SHARP_SR3_DERING_LUMA2PKGAIN_0TO3  ) // 0x6c
#define SRSHARP1_SR3_DERING_LUMA2PKGAIN_4TO6    (SRSHARP1_OFFSET + SHARP_SR3_DERING_LUMA2PKGAIN_4TO6  ) // 0x6d
#define SRSHARP1_SR3_DERING_LUMA2PKOS_0TO3      (SRSHARP1_OFFSET + SHARP_SR3_DERING_LUMA2PKOS_0TO3    ) // 0x6e
#define SRSHARP1_SR3_DERING_LUMA2PKOS_4TO6      (SRSHARP1_OFFSET + SHARP_SR3_DERING_LUMA2PKOS_4TO6    ) // 0x6f
#define SRSHARP1_SR3_DERING_GAINVS_MADSAD       (SRSHARP1_OFFSET + SHARP_SR3_DERING_GAINVS_MADSAD     ) // 0x70
#define SRSHARP1_SR3_DERING_GAINVS_VR2MAX       (SRSHARP1_OFFSET + SHARP_SR3_DERING_GAINVS_VR2MAX     ) // 0x71
#define SRSHARP1_SR3_DERING_PARAM0              (SRSHARP1_OFFSET + SHARP_SR3_DERING_PARAM0            ) // 0x72
#define SRSHARP1_SR3_DRTLPF_THETA               (SRSHARP1_OFFSET + SHARP_SR3_DRTLPF_THETA             ) // 0x73
#define SRSHARP1_SATPRT_CTRL                    (SRSHARP1_OFFSET + SHARP_SATPRT_CTRL                  ) // 0x74
#define SRSHARP1_SATPRT_DIVM                    (SRSHARP1_OFFSET + SHARP_SATPRT_DIVM                  ) // 0x75
#define SRSHARP1_SATPRT_LMT_RGB                 (SRSHARP1_OFFSET + SHARP_SATPRT_LMT_RGB               ) // 0x76
#define SRSHARP1_DB_FLT_CTRL                    (SRSHARP1_OFFSET + SHARP_DB_FLT_CTRL                  ) // 0x77
#define SRSHARP1_DB_FLT_YC_THRD                 (SRSHARP1_OFFSET + SHARP_DB_FLT_YC_THRD               ) // 0x78
#define SRSHARP1_DB_FLT_RANDLUT                 (SRSHARP1_OFFSET + SHARP_DB_FLT_RANDLUT               ) // 0x79
#define SRSHARP1_DB_FLT_PXI_THRD                (SRSHARP1_OFFSET + SHARP_DB_FLT_PXI_THRD              ) // 0x7a
#define SRSHARP1_DB_FLT_SEED_Y                  (SRSHARP1_OFFSET + SHARP_DB_FLT_SEED_Y                ) // 0x7b
#define SRSHARP1_DB_FLT_SEED_U                  (SRSHARP1_OFFSET + SHARP_DB_FLT_SEED_U                ) // 0x7c
#define SRSHARP1_DB_FLT_SEED_V                  (SRSHARP1_OFFSET + SHARP_DB_FLT_SEED_V                ) // 0x7d
#define SRSHARP1_PKGAIN_VSLUMA_LUT_L            (SRSHARP1_OFFSET + SHARP_PKGAIN_VSLUMA_LUT_L          ) // 0x80
#define SRSHARP1_PKGAIN_VSLUMA_LUT_H            (SRSHARP1_OFFSET + SHARP_PKGAIN_VSLUMA_LUT_H          ) // 0x81
#define SRSHARP1_PKOSHT_VSLUMA_LUT_L            (SRSHARP1_OFFSET + SHARP_PKOSHT_VSLUMA_LUT_L          ) // 0x82
#define SRSHARP1_PKOSHT_VSLUMA_LUT_H            (SRSHARP1_OFFSET + SHARP_PKOSHT_VSLUMA_LUT_H          ) // 0x83

// synopsys translate_off
// synopsys translate_on
//
// Closing file:  srsharp_regs.h
//
//`define DOLBY0_VCBUS_BASE              8'h33
//`include "dolby0_regs.h"
// -----------------------------------------------
// CBUS_BASE:  DOLBYTV_VCBUS_BASE = 0x33
// -----------------------------------------------
//
// Reading file:  dolby_regs.h
//
// synopsys translate_off
// synopsys translate_on
#define DOLBY_TV_REG_START                         ((0x3300  << 2) + 0xff900000)
// dolby register address 0~0xDA
#define DOLBY_TV_CLKGATE_CTRL                      ((0x33f1  << 2) + 0xff900000)
//bit[9:8]  R-RW 0~3 0  dma2axi_clkgate_ctrl         : 0 "auto gated clock", 1 "closed clock", 2&3 "free run clock"
//bit[7:6]  R-RW 0~3 0  bl_dolby_swaps_clkgate_ctrl  : 0 "auto gated clock", 1 "closed clock", 2&3 "free run clock"
//bit[5:4]  R-RW 0~3 0  el_swaps_clkgate_ctrl        : 0 "auto gated clock", 1 "closed clock", 2&3 "free run clock"
//bit[3:2]  R-RW 0~3 0  el_buf_clkgate_ctrl          : 0 "auto gated clock", 1 "closed clock", 2&3 "free run clock"
//bit[1:0]  R-RW 0~3 0  top_level_reg_clkgate_ctrl   : 0 "auto gated clock", 1 "closed clock", 2&3 "free run clock"
#define DOLBY_TV_SWAP_CTRL0                        ((0x33f2  << 2) + 0xff900000)
//bit[2]  R-RW 0~1  0   el_41mode      : 1 "bl resolution : el resolution = 4:1", 0 "bl_res : el_res = 1:1"
//bit[1]  R-RW 0~1  0   el_enable      : 1 "enhancement layer is supported", 0 "el is not supported"
//bit[0]  R-RW 0~1  0   source_enable  : 1 "base layer is supported", 0 "bl is not supported"
#define DOLBY_TV_SWAP_CTRL1                        ((0x33f3  << 2) + 0xff900000)
//bit[28:16]  R-RW  0~8191 0  htotal  : total pixels number in each line
//bit[21:0]   R-RW  0~8191 0  vtotal  : total line number in each frame (only support progress frame)
#define DOLBY_TV_SWAP_CTRL2                        ((0x33f4  << 2) + 0xff900000)
//bit[28:16]  R-RW  0~4096 0 hsize  : active pixels number in each line
//bit[21:0]   R-RW  0~3840 0 vsize  : active lines number in each frame
#define DOLBY_TV_SWAP_CTRL3                        ((0x33f5  << 2) + 0xff900000)
//bit[28:16]  R-RW  0~8191 0  hsync_width  : hsync signal width (high effective)
//bit[21:0]   R-RW  0~8191 0  vsync_width  : vysnc singal width (high effective)
#define DOLBY_TV_SWAP_CTRL4                        ((0x33f6  << 2) + 0xff900000)
//bit[28:16]  R-RW  0~8191 0  hsync_backporch  : pixels number between hsync and h_active_duration
//bit[21:0]   R-RW  0~8191 0  vsync_backporch  : lines number between vsync and v_active_duration
#define DOLBY_TV_SWAP_CTRL5                        ((0x33f7  << 2) + 0xff900000)
//[25:8]      R-RW                           :   reg_tunnel_sel for tunnel bit match swap
//bit[4]      R-RW  0~1  0   bl_tunnel_mode  :   1 "hdmi input, source is 12bit422 tunnel in 8bit444", 0 "opt mode, 10 bit 444"
//bit[3:2]    R-RW  0~3  0   bl_uv_mode      :   3 "uv=in_u", 2 "uv[0]=u[0],uv[1]=v[0]", 1 "uv[0]=v[0],uv[1]=u[0]", 0 "uv=in_v"
//bit[1:0]    R-RW  0~3  0   el_uv_mode      :   3 "uv=in_u", 2 "uv[0]=u[0],uv[1]=v[0]", 1 "uv[0]=v[0],uv[1]=u[0]", 0 "uv=in_v"
#define DOLBY_TV_SWAP_CTRL6                        ((0x33f8  << 2) + 0xff900000)
//bit[31]     R-RW  0~1      dm_uv_input     :   uv select
//bit[23:16]  R-RW  0~1  0   dump_ctrl       :   1 "fixed output bitdepth as 12bit", 0 "output bitdepth based on vdr_bit_depth"
//bit[15]     R-RW  0~1      datapath_reset_n_enable : manual reset control
//bit[14]     R-RW  0~1      handshake_reset_n_enable : manual reset control
//bit[13]     R-RW  0~1      axi_reset_n_enable : manual reset control
//bit[5:2]    R-RW  0~15     vdr_bit_depth
//bit[1:0]    R-RW  0~3      reg_hdmi_mode
#define DOLBY_TV_SWAP_CTRL7                        ((0x33f9  << 2) + 0xff900000)
//reserved
#define DOLBY_TV_AXI2DMA_CTRL0                     ((0x33fa  << 2) + 0xff900000)
//bit[31]        R-RW   0~1  0    reg_req_en         :  enable req after line count
//bit[30]        R-RW   0~1  0    reg_id_check       :  check the id of data path and req path
//bit[29]        R-RW   0~1  0    reg_clear_fifo     :  manually reset bit
//bit[28]        R-RW   0~1  0    reg_vsync_rst      :  soft_rst auto reset enable
//bit[27]        R-RW   0~1  0    reg_update_addr    :  manually udpate start addr
//bit[26]        R-RW   0~1  0    reg_addr_auto      :  auto update start addr enable
//bit[25]        R-RW   0~1  0    reg_keep_receive   :  data path keep receive
//bit[24:19]     R-RW   0~63 0    reg_req_th         :  fifo_room > req_th, then send the request
//bit[18:16]     R-RW   0~7  0    reg_arsize         :  axi arsize
//bit[14:12]     R-RW   0~7  0    reg_arprot         :  axi arprot
//bit[11:8]      R-RW   0~15 0    reg_aruser         :  axi aruser
//bit[5:4]       R-RW   0~3  0    reg_arid           :  axi arid
//bit[3:0]       R-RW   0~2  0    reg_lens           :  default request lens, each burst has "reg_lens+1" data
#define DOLBY_TV_AXI2DMA_CTRL1                     ((0x33fb  << 2) + 0xff900000)
//bit[31]        R-RW   0~1     0 axi_addr_mode   :  1 "canvas mode", 0 "normal mode"
//bit[27:16]     R-RW   0~4095  0 dma_size0       :  total data number in dma0
//bit[11:0]      R-RW   0~4095  0 dma_size1       :  total data number in dma1
#define DOLBY_TV_AXI2DMA_CTRL2                     ((0x33fc  << 2) + 0xff900000)
//bit[31:0]      R-RW   0~4294967295  0 axi_start_addr : axi start address
#define DOLBY_TV_AXI2DMA_CTRL3                     ((0x33fd  << 2) + 0xff900000)
//bit[11:0]      R-RW   0~4095        0  hold_line     :  after hold_line the axi slave start requesting
#define DOLBY_TV_STATUS0                           ((0x33fe  << 2) + 0xff900000)
#define DOLBY_TV_STATUS1                           ((0x33ff  << 2) + 0xff900000)
#define DOLBY_TV_ADAPTIVE_SCALE_REGADDR            ((0x33e0  << 2) + 0xff900000)
#define DOLBY_TV_ADAPTIVE_SCALE_REGDATA            ((0x33e1  << 2) + 0xff900000)
#define DOLBY_TV_ADAPTIVE_SCALE_LUTADDR            ((0x33e2  << 2) + 0xff900000)
#define DOLBY_TV_ADAPTIVE_SCALE_LUTDATA            ((0x33e3  << 2) + 0xff900000)
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  dolby_regs.h
//
// -----------------------------------------------
// CBUS_BASE:  DOLBY1A_VCBUS_BASE = 0x34
// -----------------------------------------------
//
// Reading file:  dolby1a_regs.h
//
// synopsys translate_off
// synopsys translate_on
#define DOLBY_CORE2A_REG_START                     ((0x3400  << 2) + 0xff900000)
#define DOLBY_CORE2A_CLKGATE_CTRL                  ((0x3432  << 2) + 0xff900000)
#define DOLBY_CORE2A_SWAP_CTRL0                    ((0x3433  << 2) + 0xff900000)
#define DOLBY_CORE2A_SWAP_CTRL1                    ((0x3434  << 2) + 0xff900000)
#define DOLBY_CORE2A_SWAP_CTRL2                    ((0x3435  << 2) + 0xff900000)
#define DOLBY_CORE2A_SWAP_CTRL3                    ((0x3436  << 2) + 0xff900000)
#define DOLBY_CORE2A_SWAP_CTRL4                    ((0x3437  << 2) + 0xff900000)
#define DOLBY_CORE2A_SWAP_CTRL5                    ((0x3438  << 2) + 0xff900000)
#define DOLBY_CORE2A_DMA_CTRL                      ((0x3439  << 2) + 0xff900000)
#define DOLBY_CORE2A_DMA_STATUS                    ((0x343a  << 2) + 0xff900000)
#define DOLBY_CORE2A_STATUS0                       ((0x343b  << 2) + 0xff900000)
#define DOLBY_CORE2A_STATUS1                       ((0x343c  << 2) + 0xff900000)
#define DOLBY_CORE2A_STATUS2                       ((0x343d  << 2) + 0xff900000)
#define DOLBY_CORE2A_STATUS3                       ((0x343e  << 2) + 0xff900000)
#define DOLBY_CORE2A_DMA_PORT                      ((0x343f  << 2) + 0xff900000)
#define DOLBY_CORE2A_AXI2DMA_CTRL0                 ((0x3440  << 2) + 0xff900000)
#define DOLBY_CORE2A_AXI2DMA_CTRL1                 ((0x3441  << 2) + 0xff900000)
#define DOLBY_CORE2A_AXI2DMA_CTRL2                 ((0x3442  << 2) + 0xff900000)
#define DOLBY_CORE2A_AXI2DMA_CTRL3                 ((0x3443  << 2) + 0xff900000)
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  dolby1a_regs.h
//
// -----------------------------------------------
// CBUS_BASE:  DOLBY1B_VCBUS_BASE = 0x35
// -----------------------------------------------
//`include "dolby1b_regs.h"
// -----------------------------------------------
// CBUS_BASE:  DOLBY2_VCBUS_BASE = 0x36
// -----------------------------------------------
//
// Reading file:  dolby2_regs.h
//
// synopsys translate_off
// synopsys translate_on
#define DOLBY_CORE3_REG_START                      ((0x3600  << 2) + 0xff900000)
#define DOLBY_CORE3_CLKGATE_CTRL                   ((0x36f0  << 2) + 0xff900000)
#define DOLBY_CORE3_SWAP_CTRL0                     ((0x36f1  << 2) + 0xff900000)
#define DOLBY_CORE3_SWAP_CTRL1                     ((0x36f2  << 2) + 0xff900000)
#define DOLBY_CORE3_SWAP_CTRL2                     ((0x36f3  << 2) + 0xff900000)
#define DOLBY_CORE3_SWAP_CTRL3                     ((0x36f4  << 2) + 0xff900000)
#define DOLBY_CORE3_SWAP_CTRL4                     ((0x36f5  << 2) + 0xff900000)
#define DOLBY_CORE3_SWAP_CTRL5                     ((0x36f6  << 2) + 0xff900000)
#define DOLBY_CORE3_SWAP_CTRL6                     ((0x36f7  << 2) + 0xff900000)
#define DOLBY_CORE3_SWAP_CTRL7                     ((0x36f8  << 2) + 0xff900000)
#define DOLBY_CORE3_SWAP_CTRL8                     ((0x36f9  << 2) + 0xff900000)
#define DOLBY_CORE3_SWAP_CTRL9                     ((0x36fa  << 2) + 0xff900000)
#define DOLBY_CORE3_STATUS0                        ((0x36fb  << 2) + 0xff900000)
#define DOLBY_CORE3_STATUS1                        ((0x36fc  << 2) + 0xff900000)
#define DOLBY_CORE3_STATUS2                        ((0x36fd  << 2) + 0xff900000)
#define DOLBY_CORE3_STATUS3                        ((0x36fe  << 2) + 0xff900000)
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  dolby2_regs.h
//
//`define MADC_VCBUS_BASE              8'h37
//
// Reading file:  vpu_madc_regs.h
//
// synopsys translate_off
// synopsys translate_on
// -----------------------------------------------
// CBUS_BASE:  MADC_VCBUS_BASE = 0x37
// -----------------------------------------------
// 0x00-0x1f
//
// Reading file:  nr4_nm_regs.h
//
// synopsys translate_off
// synopsys translate_on
#define NR4_MCNR_SAD_GAIN                          ((0x3700  << 2) + 0xff900000)
//Bit 31:25        reserved
//Bit 24           reg_nr4_bld12vs3_usemaxsad     // unsigned , default = 0  use minsad/maxsad instead of minsad/avgsad to decision if it was texture or flat region, 1: use minsad/maxsad
//Bit 23:16        reg_nr4_bld12vs3_rate_gain     // unsigned , default = 64  gain to minsad/maxsad or minsad/avgsad before LUT, 64 normalized as "1"
//Bit 15: 8        reg_nr4_bld1vs2_rate_gain      // unsigned , default = 32  gain to minsad/maxsad or minsad/avgsad before the LUT, 64 normalized as"1"
//Bit  7: 0        reg_nr4_coefblt_gain           // unsigned , default = 64  gain to final coefblt, normalized 64 as "1"
#define NR4_MCNR_LPF_CTRL                          ((0x3701  << 2) + 0xff900000)
//Bit 31            reserved
//Bit 30:22        reg_nr4_preflt_alpofst         // signed , default = 0  pre filter alpha ofst
//Bit 21:16        reg_nr4_preflt_alpgain         // unsigned , default = 16  pre filter alpha gain
//Bit 15:14        reg_nr4_preflt_alpsel          // unsigned , default = 3  pre filter alpha selection for adaptive blending, 0: mv pointed sad, 1: weighted mv pointed sad, 2or3: coefblt
//Bit 13: 8        reg_nr4_avgsad_gain            // unsigned , default = 8  gain for avg sad before luts
//Bit  7            reserved
//Bit  6           reg_nr4_maxsad_mod             // unsigned , default = 1  max sad select mode, 0: mx2_sad, 1: max sad
//Bit  5           reg_nr4_minsad_mod             // unsigned , default = 1  min sad select mode, 0: sad with min err, 1: min sad
//Bit  4           reg_nr4_minmaxsad_lpf          // unsigned , default = 1  mode of lpf for minmaxsad, 0: no LPF, 1: [1 2 1]/4
//Bit  3           reg_nr4_avgsad_lpf             // unsigned , default = 1  mode of lpf for avgsad, 0: no LPF, 1: [1 2 1]/4
//Bit  2           reg_nr4_minavgsad_ratio_lpf    // unsigned , default = 1  mode of lpf for minsad/avgsad and zmvsad/avgsad, 0: no LPF, 1: [1 2 1]/4
//Bit  1           reg_nr4_bldvs_lut_lpf          // unsigned , default = 1  mode of lpf for bld12vs3 and bld1vs2 LUT results, 0: no LPF, 1: [1 2 1]/4
//Bit  0           reg_nr4_final_coef_lpf         // unsigned , default = 1  mode of lpf for final coef_blt_blend123, 0: no LPF, 1: [1 2 1]/4
#define NR4_MCNR_BLD_VS3LUT0                       ((0x3702  << 2) + 0xff900000)
//Bit 31:30        reserved
//Bit 29:24        reg_nr4_bld12vs3_lut0     // unsigned , default = 0
//Bit 23:22        reserved
//Bit 21:16        reg_nr4_bld12vs3_lut1     // unsigned , default = 8
//Bit 15:14        reserved
//Bit 13: 8        reg_nr4_bld12vs3_lut2     // unsigned , default = 10
//Bit  7: 6        reserved
//Bit  5: 0        reg_nr4_bld12vs3_lut3     // unsigned , default = 11
#define NR4_MCNR_BLD_VS3LUT1                       ((0x3703  << 2) + 0xff900000)
//Bit 31:30        reserved
//Bit 29:24        reg_nr4_bld12vs3_lut4     // unsigned , default = 12
//Bit 23:22        reserved
//Bit 21:16        reg_nr4_bld12vs3_lut5     // unsigned , default = 14
//Bit 15:14        reserved
//Bit 13: 8        reg_nr4_bld12vs3_lut6     // unsigned , default = 16
//Bit  7: 6        reserved
//Bit  5: 0        reg_nr4_bld12vs3_lut7     // unsigned , default = 24
#define NR4_MCNR_BLD_VS3LUT2                       ((0x3704  << 2) + 0xff900000)
//Bit 31:30        reserved
//Bit 29:24        reg_nr4_bld12vs3_lut8     // unsigned , default = 50
//Bit 23:22        reserved
//Bit 21:16        reg_nr4_bld12vs3_lut9     // unsigned , default = 58
//Bit 15:14        reserved
//Bit 13: 8        reg_nr4_bld12vs3_lut10    // unsigned , default = 63
//Bit  7: 6        reserved
//Bit  5: 0        reg_nr4_bld12vs3_lut11    // unsigned , default = 63
#define NR4_MCNR_BLD_VS2LUT0                       ((0x3705  << 2) + 0xff900000)
//Bit 31:30        reserved
//Bit 29:24        reg_nr4_bld1vs2_lut0      // unsigned , default = 63
//Bit 23:22        reserved
//Bit 21:16        reg_nr4_bld1vs2_lut1      // unsigned , default = 32
//Bit 15:14        reserved
//Bit 13: 8        reg_nr4_bld1vs2_lut2      // unsigned , default = 16
//Bit  7: 6        reserved
//Bit  5: 0        reg_nr4_bld1vs2_lut3      // unsigned , default = 8
#define NR4_MCNR_BLD_VS2LUT1                       ((0x3706  << 2) + 0xff900000)
//Bit 31:30        reserved
//Bit 29:24        reg_nr4_bld1vs2_lut4      // unsigned , default = 4
//Bit 23:22        reserved
//Bit 21:16        reg_nr4_bld1vs2_lut5      // unsigned , default = 2
//Bit 15:14        reserved
//Bit 13: 8        reg_nr4_bld1vs2_lut6      // unsigned , default = 1
//Bit  7: 6        reserved
//Bit  5: 0        reg_nr4_bld1vs2_lut7      // unsigned , default = 0
#define NR4_COEFBLT_LUT10                          ((0x3707  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_coefblt_lut10     // signed , default = -128
//Bit 23:16        reg_nr4_coefblt_lut11     // signed , default = -128
//Bit 15: 8        reg_nr4_coefblt_lut12     // signed , default = -126
//Bit  7: 0        reg_nr4_coefblt_lut13     // signed , default = -124
#define NR4_COEFBLT_LUT11                          ((0x3708  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_coefblt_lut14     // signed , default = -120
//Bit 23:16        reg_nr4_coefblt_lut15     // signed , default = -110
//Bit 15: 8        reg_nr4_coefblt_lut16     // signed , default = -100
//Bit  7: 0        reg_nr4_coefblt_lut17     // signed , default = -90
#define NR4_COEFBLT_LUT12                          ((0x3709  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_coefblt_lut18     // signed , default = -56
//Bit 23:16        reg_nr4_coefblt_lut19     // signed , default = -32
//Bit 15: 8        reg_nr4_coefblt_lut110    // signed , default = -64
//Bit  7: 0        reg_nr4_coefblt_lut111    // signed , default = -128
#define NR4_COEFBLT_LUT20                          ((0x370a  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_coefblt_lut20     // signed , default = -128
//Bit 23:16        reg_nr4_coefblt_lut21     // signed , default = -120
//Bit 15: 8        reg_nr4_coefblt_lut22     // signed , default = -112
//Bit  7: 0        reg_nr4_coefblt_lut23     // signed , default = -104
#define NR4_COEFBLT_LUT21                          ((0x370b  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_coefblt_lut24     // signed , default = -96
//Bit 23:16        reg_nr4_coefblt_lut25     // signed , default = -88
//Bit 15: 8        reg_nr4_coefblt_lut26     // signed , default = -76
//Bit  7: 0        reg_nr4_coefblt_lut27     // signed , default = -64
#define NR4_COEFBLT_LUT22                          ((0x370c  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_coefblt_lut28     // signed , default = -48
//Bit 23:16        reg_nr4_coefblt_lut29     // signed , default = -32
//Bit 15: 8        reg_nr4_coefblt_lut210    // signed , default = -64
//Bit  7: 0        reg_nr4_coefblt_lut211    // signed , default = -108
#define NR4_COEFBLT_LUT30                          ((0x370d  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_coefblt_lut30     // signed , default = 8
//Bit 23:16        reg_nr4_coefblt_lut31     // signed , default = 16
//Bit 15: 8        reg_nr4_coefblt_lut32     // signed , default = 24
//Bit  7: 0        reg_nr4_coefblt_lut33     // signed , default = 30
#define NR4_COEFBLT_LUT31                          ((0x370e  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_coefblt_lut34     // signed , default = 36
//Bit 23:16        reg_nr4_coefblt_lut35     // signed , default = 48
//Bit 15: 8        reg_nr4_coefblt_lut36     // signed , default = 70
//Bit  7: 0        reg_nr4_coefblt_lut37     // signed , default = 96
#define NR4_COEFBLT_LUT32                          ((0x370f  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_coefblt_lut38     // signed , default = 120
//Bit 23:16        reg_nr4_coefblt_lut39     // signed , default = 64
//Bit 15: 8        reg_nr4_coefblt_lut310    // signed , default = 16
//Bit  7: 0        reg_nr4_coefblt_lut311    // signed , default = -8
#define NR4_COEFBLT_CONV                           ((0x3710  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:16        reg_nr4_coefblt_convmin   // unsigned , default = 0  minimum of coef. bilateral conversion
//Bit 15: 8        reg_nr4_coefblt_convmax   // unsigned , default = 255  maximum of coef. bilateral conversion
//Bit  7: 0        reg_nr4_coefblt_convmid   // unsigned , default = 128  value at midpoint of coef. bilateral conversion
#define NR4_DBGWIN_YX0                             ((0x3711  << 2) + 0xff900000)
//Bit 31:30        reserved
//Bit 29:16        reg_nr4_dgbwin_yx0        // unsigned , default = 100  ystart for debug window
//Bit 15:14        reserved
//Bit 13: 0        reg_nr4_dgbwin_yx1        // unsigned , default = 160  yend   for debug window
#define NR4_DBGWIN_YX1                             ((0x3712  << 2) + 0xff900000)
//Bit 31:30        reserved
//Bit 29:16        reg_nr4_dgbwin_yx2        // unsigned , default = 200  xstart for debug window
//Bit 15:14        reserved
//Bit 13: 0        reg_nr4_dgbwin_yx3        // unsigned , default = 300  xend   for debug window
#define NR4_NM_X_CFG                               ((0x3713  << 2) + 0xff900000)
//Bit 31:30        reserved
//Bit 29:16        reg_nr4_nm_xst            // unsigned , default = 8  start for noise meter statistic, dft = 8
//Bit 15:14        reserved
//Bit 13: 0        reg_nr4_nm_xed            // unsigned , default = 711  end for noise meter statistic, dft = HSIZE-8-1;
#define NR4_NM_Y_CFG                               ((0x3714  << 2) + 0xff900000)
//Bit 31:30        reserved
//Bit 29:16        reg_nr4_nm_yst            // unsigned , default = 8  start for noise meter statistic, dft = 8;
//Bit 15:14        reserved
//Bit 13: 0        reg_nr4_nm_yed            // unsigned , default = 231  end for noise meter statistic, dft = VSIZE-8-1;
#define NR4_NM_SAD_THD                             ((0x3715  << 2) + 0xff900000)
//Bit 31: 8        reserved
//Bit  7: 0        reg_nr4_nm_sad_thd        // unsigned , default = 255  threshold for (flat region) sad count, dft = 4
#define NR4_MCNR_BANDSPLIT_PRAM                    ((0x3716  << 2) + 0xff900000)
//Bit 31: 5        reserved
//Bit  4           reg_nr4_mc_use_bandsplit     // unsigned , default = 1  separate lp and us for mc IIR filter, 0: no BS used; 1: use BS
//Bit  3           reg_nr4_mc_apply_on_lp       // unsigned , default = 1  use mcnr only on lowpass portion;
//Bit  2           reg_nr4_mc_apply_on_us       // unsigned , default = 1  use mcnr only on lp complimentary portion;
//Bit  1: 0        reg_nr4_mc_zmvbs_use_adplpf  // unsigned , default = 1  use adapptive LPF for the zmv pointing data for MCNR, for abs(mvx)<th
#define NR4_MCNR_ALP1_SGN_COR                      ((0x3717  << 2) + 0xff900000)
//Bit 31:24        reg_nr4_mc_aph1_sgn_coring0  // unsigned , default = 10  coring to cur-pre before do sgn decision
//Bit 23:16        reg_nr4_mc_aph1_sgn_coring1  // unsigned , default = 7  coring to cur-pre before do sgn decision
//Bit 15: 8        reg_nr4_mc_aph1_sgn_core_max0 // unsigned , default = 90  maximum of coring, default = 30/15
//Bit  7: 0        reg_nr4_mc_aph1_sgn_core_max1 // unsigned , default = 15  maximum of coring, default = 30/15
#define NR4_MCNR_ALP1_SGN_PRAM                     ((0x3718  << 2) + 0xff900000)
//Bit 31:11        reserved
//Bit 10           reg_nr4_mc_alp1_sgn_half       // unsigned , default = 1  half block sgn sum mode enable, 0: only use 3x5 whole block sum of sgns; 1: use max(sgn_3x5, sqrt(sgn_left+sgn_righ))
//Bit  9           reg_nr4_mc_alp1_sgn_frczmv   // unsigned , default = 1  force zmv to calculate the sign_sum;
//Bit  8           reg_nr4_mc_alp1_sgnmvx_mode  // unsigned , default = 1  blend mode of sgnlut and mvxlut blend mode: 0: sgnlut+ mvxlut; 1: max(sgnlut, mvxlut), default =1
//Bit  7: 4        reg_nr4_mc_aph1_sgn_crate0   // unsigned , default = 4  rate to var, norm to 16 as 1, default = 2
//Bit  3: 0        reg_nr4_mc_aph1_sgn_crate1   // unsigned , default = 2  rate to var, norm to 16 as 1, default = 2
#define NR4_MCNR_ALP1_MVX_LUT1                     ((0x3719  << 2) + 0xff900000)
//Bit 31:28        reg_nr4_mc_alp1_mvx_luty3  // unsigned , default = 14  alp1 of luma vas mvx(0~7), and alp1 vs mvy(0,1)
//Bit 27:24        reg_nr4_mc_alp1_mvx_lutc3  // unsigned , default = 14  alp1 of chrm vas mvx(0~7), and alp1 vs mvy(0,1)
//Bit 23:20        reg_nr4_mc_alp1_mvx_luty2  // unsigned , default = 12  alp1 of luma vas mvx(0~7), and alp1 vs mvy(0,1)
//Bit 19:16        reg_nr4_mc_alp1_mvx_lutc2  // unsigned , default = 12  alp1 of chrm vas mvx(0~7), and alp1 vs mvy(0,1)
//Bit 15:12        reg_nr4_mc_alp1_mvx_luty1  // unsigned , default = 5  alp1 of luma vas mvx(0~7), and alp1 vs mvy(0,1)
//Bit 11: 8        reg_nr4_mc_alp1_mvx_lutc1  // unsigned , default = 5  alp1 of chrm vas mvx(0~7), and alp1 vs mvy(0,1)
//Bit  7: 4        reg_nr4_mc_alp1_mvx_luty0  // unsigned , default = 3  alp1 of luma vas mvx(0~7), and alp1 vs mvy(0,1)
//Bit  3: 0        reg_nr4_mc_alp1_mvx_lutc0  // unsigned , default = 3  alp1 of chrm vas mvx(0~7), and alp1 vs mvy(0,1)
#define NR4_MCNR_ALP1_MVX_LUT2                     ((0x371a  << 2) + 0xff900000)
//Bit 31:28        reg_nr4_mc_alp1_mvx_luty7  // unsigned , default = 15  alp1 of luma vas mvx(0~7), and alp1 vs mvy(0,1)
//Bit 27:24        reg_nr4_mc_alp1_mvx_lutc7  // unsigned , default = 15  alp1 of chrm vas mvx(0~7), and alp1 vs mvy(0,1)
//Bit 23:20        reg_nr4_mc_alp1_mvx_luty6  // unsigned , default = 15  alp1 of luma vas mvx(0~7), and alp1 vs mvy(0,1)
//Bit 19:16        reg_nr4_mc_alp1_mvx_lutc6  // unsigned , default = 15  alp1 of chrm vas mvx(0~7), and alp1 vs mvy(0,1)
//Bit 15:12        reg_nr4_mc_alp1_mvx_luty5  // unsigned , default = 15  alp1 of luma vas mvx(0~7), and alp1 vs mvy(0,1)
//Bit 11: 8        reg_nr4_mc_alp1_mvx_lutc5  // unsigned , default = 15  alp1 of chrm vas mvx(0~7), and alp1 vs mvy(0,1)
//Bit  7: 4        reg_nr4_mc_alp1_mvx_luty4  // unsigned , default = 15  alp1 of luma vas mvx(0~7), and alp1 vs mvy(0,1)
//Bit  3: 0        reg_nr4_mc_alp1_mvx_lutc4  // unsigned , default = 15  alp1 of chrm vas mvx(0~7), and alp1 vs mvy(0,1)
#define NR4_MCNR_ALP1_MVX_LUT3                     ((0x371b  << 2) + 0xff900000)
//Bit 31: 8        reserved
//Bit  7: 4        reg_nr4_mc_alp1_mvx_luty8  // unsigned , default = 6  alp1 of luma vas mvx(0~7), and alp1 vs mvy(0,1)
//Bit  3: 0        reg_nr4_mc_alp1_mvx_lutc8  // unsigned , default = 6  alp1 of chrm vas mvx(0~7), and alp1 vs mvy(0,1)
#define NR4_MCNR_ALP1_LP_PRAM                      ((0x371c  << 2) + 0xff900000)
//Bit 31:18        reserved
//Bit 17:16        reg_nr4_mc_alp1_lp_sel    // unsigned , default = 1  mode for alp1_lp for lp portion IIR, 0: apha1, 1:dc_dif vs ac analysis; 2: gain/ofst of alp1; 3: max of #1/#2 results
//Bit 15: 8        reg_nr4_mc_alp1_lp_gain   // unsigned , default = 64  gain to alp1 to get the alp1_lp = alp1*gain/32 + ofset, default =64;
//Bit  7: 0        reg_nr4_mc_alp1_lp_ofst   // signed , default = 0  offset to alp1 to get the alp1_lp = alp1*gain/32 + ofset, default =10;
#define NR4_MCNR_ALP1_SGN_LUT1                     ((0x371d  << 2) + 0xff900000)
//Bit 31:28        reg_nr4_mc_alp1_sgn_lut0  // unsigned , default = 3  alp1 vs x=abs|sgn(cur-pre)|, if x is small, less possibility of flat region move
//Bit 27:24        reg_nr4_mc_alp1_sgn_lut1  // unsigned , default = 3  alp1 vs x=abs|sgn(cur-pre)|, if x is small, less possibility of flat region move
//Bit 23:20        reg_nr4_mc_alp1_sgn_lut2  // unsigned , default = 3  alp1 vs x=abs|sgn(cur-pre)|, if x is small, less possibility of flat region move
//Bit 19:16        reg_nr4_mc_alp1_sgn_lut3  // unsigned , default = 4  alp1 vs x=abs|sgn(cur-pre)|, if x is small, less possibility of flat region move
//Bit 15:12        reg_nr4_mc_alp1_sgn_lut4  // unsigned , default = 5  alp1 vs x=abs|sgn(cur-pre)|, if x is small, less possibility of flat region move
//Bit 11: 8        reg_nr4_mc_alp1_sgn_lut5  // unsigned , default = 6  alp1 vs x=abs|sgn(cur-pre)|, if x is small, less possibility of flat region move
//Bit  7: 4        reg_nr4_mc_alp1_sgn_lut6  // unsigned , default = 7  alp1 vs x=abs|sgn(cur-pre)|, if x is small, less possibility of flat region move
//Bit  3: 0        reg_nr4_mc_alp1_sgn_lut7  // unsigned , default = 8  alp1 vs x=abs|sgn(cur-pre)|, if x is small, less possibility of flat region move
#define NR4_MCNR_ALP1_SGN_LUT2                     ((0x371e  << 2) + 0xff900000)
//Bit 31:28        reg_nr4_mc_alp1_sgn_lut8   // unsigned , default = 9  alp1 vs x=abs|sgn(cur-pre)|, if x is small, less possibility of flat region move
//Bit 27:24        reg_nr4_mc_alp1_sgn_lut9   // unsigned , default = 10  alp1 vs x=abs|sgn(cur-pre)|, if x is small, less possibility of flat region move
//Bit 23:20        reg_nr4_mc_alp1_sgn_lut10  // unsigned , default = 11  alp1 vs x=abs|sgn(cur-pre)|, if x is small, less possibility of flat region move
//Bit 19:16        reg_nr4_mc_alp1_sgn_lut11  // unsigned , default = 12  alp1 vs x=abs|sgn(cur-pre)|, if x is small, less possibility of flat region move
//Bit 15:12        reg_nr4_mc_alp1_sgn_lut12  // unsigned , default = 13  alp1 vs x=abs|sgn(cur-pre)|, if x is small, less possibility of flat region move
//Bit 11: 8        reg_nr4_mc_alp1_sgn_lut13  // unsigned , default = 14  alp1 vs x=abs|sgn(cur-pre)|, if x is small, less possibility of flat region move
//Bit  7: 4        reg_nr4_mc_alp1_sgn_lut14  // unsigned , default = 15  alp1 vs x=abs|sgn(cur-pre)|, if x is small, less possibility of flat region move
//Bit  3: 0        reg_nr4_mc_alp1_sgn_lut15  // unsigned , default = 15  alp1 vs x=abs|sgn(cur-pre)|, if x is small, less possibility of flat region move
#define NR4_RO_NM_SAD_SUM                          ((0x371f  << 2) + 0xff900000)
//Bit 31: 0        ro_nr4_nm_sad_sum         // unsigned , default = 0  sum of sad, for scene change detectcion, in noise meter
#define NR4_RO_NM_SAD_CNT                          ((0x3720  << 2) + 0xff900000)
//Bit 31: 0        ro_nr4_nm_sad_cnt         // unsigned , default = 0  cnt of sad, for scene change detectcion, in noise meter
#define NR4_RO_NM_VAR_SUM                          ((0x3721  << 2) + 0xff900000)
//Bit 31: 0        ro_nr4_nm_var_sum         // unsigned , default = 0  sum of var, for noise level detection, in noise meter
#define NR4_RO_NM_VAR_SCNT                         ((0x3722  << 2) + 0xff900000)
//Bit 31: 0        ro_nr4_nm_var_cnt         // unsigned , default = 0  cnt of var, for noise level detection, in noise meter
#define NR4_RO_NM_VAR_MIN_MAX                      ((0x3723  << 2) + 0xff900000)
//Bit 31:22        reserved
//Bit 21:12        ro_nr4_nm_min_var         // unsigned , default = 1023  min of var, for noise level detection, in noise meter
//Bit 11:10        reserved
//Bit  9: 0        ro_nr4_nm_max_var         // unsigned , default = 0  max of var, for noise level detection, in noise meter
#define NR4_RO_NR4_DBGPIX_NUM                      ((0x3724  << 2) + 0xff900000)
//Bit 31:28        reserved
//Bit 27: 0        ro_nr4_dbgpix_num         // unsigned , default = 0  number of pixels statistic invoved (removed?)
#define NR4_RO_NR4_BLDVS2_SUM                      ((0x3725  << 2) + 0xff900000)
//Bit 31: 0        ro_nr4_bld1vs2_sum        // unsigned , default = 0  sum of blend_1vs2 with the debug window
#define NR4_BLDVS3_SUM                             ((0x3726  << 2) + 0xff900000)
//Bit 31: 0        ro_nr4_bld12vs3_sum       // unsigned , default = 0  sum of blend_12vs3 with the debug window
#define NR4_COEF12_SUM                             ((0x3727  << 2) + 0xff900000)
//Bit 31: 0        ro_nr4_coef12_sum         // signed , default = 0  sum of coef_blt_blend12 with the debug window, under 8 bits precision
#define NR4_COEF123_SUM                            ((0x3728  << 2) + 0xff900000)
//Bit 31: 0        ro_nr4_coef123_sum        // signed , default = 0  sum of coef_final with the debug window, under 8 bits precision
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  nr4_nm_regs.h
//
// 0x28-0x38
//
// Reading file:  nr_deband_regs.h
//
// synopsys translate_off
// synopsys translate_on
#define NR_DB_FLT_CTRL                             ((0x3738  << 2) + 0xff900000)
//Bit 31:27        reserved
//Bit 26           reg_nrdeband_reset1       // unsigned , default = 0  0 : no reset seed  1: reload chroma seed
//Bit 25           reg_nrdeband_reset0       // unsigned , default = 0  0 : no reset seed  1: reload luma seed
//Bit 24           reg_nrdeband_rgb          // unsigned , default = 0  0 : yuv 1: RGB
//Bit 23           reg_nrdeband_en11         // unsigned , default = 1  debanding registers of side lines, [0] for luma,   same for below
//Bit 22           reg_nrdeband_en10         // unsigned , default = 1  debanding registers of side lines, [1] for chroma, same for below
//Bit 21           reg_nrdeband_siderand     // unsigned , default = 1  options to use side two lines use the rand, instead of use for the YUV three component of middle line, 0: seed[3]/bandrand[3] for middle line yuv; 1: seed[3]/bandrand[3] for nearby three lines Y;
//Bit 20           reg_nrdeband_randmode     // unsigned , default = 0  mode of rand noise adding, 0: same noise strength for all difs; else: strenght of noise will not exceed the difs, MIN((pPKReg->reg_nrdeband_bandrand[m]), noise[m])
//Bit 19:17        reg_nrdeband_bandrand2    // unsigned , default = 6
//Bit 16            reserved
//Bit 15:13        reg_nrdeband_bandrand1    // unsigned , default = 6
//Bit 12            reserved
//Bit 11: 9        reg_nrdeband_bandrand0    // unsigned , default = 6
//Bit  8            reserved
//Bit  7           reg_nrdeband_hpxor1       // unsigned , default = 1   debanding random hp portion xor, [0] for luma
//Bit  6           reg_nrdeband_hpxor0       // unsigned , default = 1   debanding random hp portion xor, [1] for chroma
//Bit  5           reg_nrdeband_en1          // unsigned , default = 1   debanding registers,  for luma
//Bit  4           reg_nrdeband_en0          // unsigned , default = 1   debanding registers,  for chroma
//Bit  3: 2        reg_nrdeband_lpf_mode1    // unsigned , default = 2   lpf mode, 0: 3x3, 1:3x5; 2: 5x5; 3:5x7
//Bit  1: 0        reg_nrdeband_lpf_mode0    // unsigned , default = 2   lpf mode, 0: 3x3, 1:3x5; 2: 5x5; 3:5x7
#define NR_DB_FLT_YC_THRD                          ((0x3739  << 2) + 0xff900000)
//Bit 31:28        reg_nrdeband_luma_th3     // unsigned , default = 9   threshold to |Y-Ylpf|, if < th[0] use lpf
//Bit 27:24        reg_nrdeband_luma_th2     // unsigned , default = 7   elseif <th[1] use (lpf*3 + y)/4
//Bit 23:20        reg_nrdeband_luma_th1     // unsigned , default = 6   elseif <th[1] use (lpf*3 + y)/4elseif <th[2] (lpf*1 + y)/2
//Bit 19:16        reg_nrdeband_luma_th0     // unsigned , default = 5   elseif <th[1] use (lpf*3 + y)/4elseif elseif <th[3] (lpf*1 + 3*y)/4; else
//Bit 15:12        reg_nrdeband_chrm_th3     // unsigned , default = 9   threshold to |Y-Ylpf|, if < th[0] use lpf
//Bit 11: 8        reg_nrdeband_chrm_th2     // unsigned , default = 7   elseif <th[1] use (lpf*3 + y)/4
//Bit  7: 4        reg_nrdeband_chrm_th1     // unsigned , default = 6   elseif <th[1] use (lpf*3 + y)/4elseif <th[2] (lpf*1 + y)/2
//Bit  3: 0        reg_nrdeband_chrm_th0     // unsigned , default = 5   elseif <th[1] use (lpf*3 + y)/4elseif elseif
#define NR_DB_FLT_RANDLUT                          ((0x373a  << 2) + 0xff900000)
//Bit 31:24        reserved
//Bit 23:21        reg_nrdeband_randslut7    // unsigned , default = 1   lut0
//Bit 20:18        reg_nrdeband_randslut6    // unsigned , default = 1   lut0
//Bit 17:15        reg_nrdeband_randslut5    // unsigned , default = 1   lut0
//Bit 14:12        reg_nrdeband_randslut4    // unsigned , default = 1   lut0
//Bit 11: 9        reg_nrdeband_randslut3    // unsigned , default = 1   lut0
//Bit  8: 6        reg_nrdeband_randslut2    // unsigned , default = 1   lut0
//Bit  5: 3        reg_nrdeband_randslut1    // unsigned , default = 1   lut0
//Bit  2: 0        reg_nrdeband_randslut0    // unsigned , default = 1   lut0
#define NR_DB_FLT_PXI_THRD                         ((0x373b  << 2) + 0xff900000)
//Bit 31:26        reserved
//Bit 25:16        reg_nrdeband_yc_th1       // unsigned , default = 0   to luma/|u/v| for using the denoise
//Bit 15:10        reserved
//Bit  9: 0        reg_nrdeband_yc_th0       // unsigned , default = 0   to luma/|u/v| for using the denoise
#define NR_DB_FLT_SEED_Y                           ((0x373c  << 2) + 0xff900000)
//Bit 31: 0        reg_nrdeband_seed0        // unsigned , default = 1621438240  noise adding seed for Y. seed[0]= 0x60a52f20; as default
#define NR_DB_FLT_SEED_U                           ((0x373d  << 2) + 0xff900000)
//Bit 31: 0        reg_nrdeband_seed1        // unsigned , default = 1621438247  noise adding seed for U. seed[0]= 0x60a52f27; as default
#define NR_DB_FLT_SEED_V                           ((0x373e  << 2) + 0xff900000)
//Bit 31: 0        reg_nrdeband_seed2        // unsigned , default = 1621438242  noise adding seed for V. seed[0]= 0x60a52f22; as default
#define NR_DB_FLT_SEED3                            ((0x373f  << 2) + 0xff900000)
//Bit 31: 0        reg_nrdeband_seed3        // unsigned , default = 1621438242  noise adding seed for V. seed[0]= 0x60a52f22; as default
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  nr_deband_regs.h
//
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  vpu_madc_regs.h
//
// -----------------------------------------------
// CBUS_BASE:  NR4NM_VCBUS_BASE = 0x68
// -----------------------------------------------
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  ./vcbus_regs.h
//
//
// Reading file:  ./ge2d_regs.h
//
// synopsys translate_off
// synopsys translate_on
//===========================================================================
////// GE2D Registers    0x8a0 - 0x8ff
//address is 0xd016_0000 - 0xd0160000 - 0xd01603ff
//===========================================================================
// -----------------------------------------------
// CBUS_BASE:  GE2D_GCBUS_BASE = 0x00
// -----------------------------------------------
//Bit 31, destination bytemask only if destination bitmask is enable
//Bit 30, destination bitmask enable
//Bit 29, source2 key  enable
//Bit 28, source2 key  mode, 0: mask data when match, 1: mask data when unmatch
//Bit 27, source1 key  enable
//Bit 26, source1 key  mode, 0: mask data when match, 1: mask data when unmatch
//Bit 25:24, dst1 8bit mode component selection,
//            00: select Y(R), 01: Cb(G), 10: Cr(B), 11: Alpha
//Bit 23  dst clip mode, 0: write inside clip window, 1: write outside clip window
//Bit 22:17,  reserved
//Bit 16:15, src2 8bit mode component selection,
//            00: select Y(R), 01: Cb(G), 10: Cr(B), 11: Alpha
//Bit 14     src2 fill mode, 0: repeat data, 1: fill default color
//Bit 13:12  src2 picture struct, 00: frame, 10: even, 11: odd
//Bit 11     src1 x direction yc ration, 0: 1:1, 1: 2:1
//Bit 10     src1 y direction yc ration, 0: 1:1, 1: 2:1
//Bit 9:7    reserved
//Bit 6:5,   src1  8bit mode component selection,
//            00: select Y(R), 01: Cb(G), 10: Cr(B), 11: Alpha
//Bit 4      src1 fill mode, 0: repeat data, 1: fill default color
//Bit 3      src1 lookup table enable
//Bit 2:1    src1 picture struct, 00: frame, 10: even, 11: odd
//Bit 0      src1 separate buffer enable
#define GE2D_GEN_CTRL0                             ((0x00a0  << 2) + 0xff940000)
//Bit 31, soft rst
//Bit 30, dst write response counter reset
//Bit 29, disable adding dst write response count to busy bit
//Bit 28:26, reserved
//bit 25:24, interrupt control, if bit[0] true, generate interrupt when one command done,
//                              if bit[1] true, generate interrupt when ge2d change from busy to not busy
//Bit 23:22 src2 burst size control
//Bit 21:16 src1 burst size control, 5:4, yfifo, 3:2, cbfifo, 1:0, crfifo
//          each 2bit, 00: 24 64bitword, 01: 32 64bitword, 10: 48 64bitwords, 11: 64 64bitwords
//Bit 15:14, dst1 picture struct, 00: frame, 10:top, 11: bottom
//Bit 13:12, bit 13 if true, force read src1, bit 12 if true, force read src2
//Bit 11, dst2 request urgent enable
//Bit 10, src1 request urgent enable
//Bit 9,  src2 request urgent enable
//Bit 8,  dst1 request urgent enable
//Bit 7:0 src1 global alpha
#define GE2D_GEN_CTRL1                             ((0x00a1  << 2) + 0xff940000)
//Bit31      alpha conversion mode in alu, 0: alpha_out = (alpha !=0) ? alpha +1 : 0;
//                 otherwise, alpha_out = (alpha < 128) ? alpha: alpha + 1;
//Bit30      color conversion mode in alu, 0: color_out = (color != 0) ? color +1: 0;
//                 otherwise, color_out = (color < 128) ? color: color + 1;
//Bit29      src1_gb_alpha_en, As = src1_gb_alpha_en ? Asr * Ag: Asr
//Bit28      dst1_color_round_mode, 0: truncate, 1: + 0.5 rounding
//Bit27      src2_color_expand_mode, 0: add 0, 1: add MSBs
//Bit26      src2_alpha_expand_mode, 0: add 0, 1: add MSBs
//Bit25      src1_color_expand_mode, 0: add 0, 1: add MSBs
//Bit24      src1_alpha_expand_mode, 0: add 0, 1: add MSBs
//Bit 23     if true, dst little endian, otherwise big endian
//Bit 22:19 dst1 color_map
//        dst1_format=0                  : output 8-bit;
//        dst1_format=1, dst1_color_map=1: output 16-bit YCbCr  655;
//        dst1_format=1, dst1_color_map=2: output 16-bit YCbCr  844;
//        dst1_format=1, dst1_color_map=3: output 16-bit YCbCrA 6442;
//        dst1_format=1, dst1_color_map=4: output 16-bit YCbCrA 4444;
//        dst1_format=1, dst1_color_map=5: output 16-bit YCbCr  565;
//        dst1_format=1, dst1_color_map=6: output 16-bit AYCbCr 4444;
//        dst1_format=1, dst1_color_map=7: output 16-bit AYCbCr 1555;
//        dst1_format=1, dst1_color_map=8: output 16-bit YCbCrA 4642;
//        dst1_format=1, dst1_color_map=9: output 16-bit CbCr   88;
//        dst1_format=1, dst1_color_map=10:output 16-bit CrCb   88;
//        dst1_format=2, dst1_color_map=0: output 24-bit YCbCr  888;
//        dst1_format=2, dst1_color_map=1: output 24-bit YCbCrA 5658;
//        dst1_format=2, dst1_color_map=2: output 24-bit AYCbCr 8565;
//        dst1_format=2, dst1_color_map=3: output 24-bit YCbCrA 6666;
//        dst1_format=2, dst1_color_map=4: output 24-bit AYCbCr 6666;
//        dst1_format=2, dst1_color_map=5: output 24-bit CrCbY  888;
//        dst1_format=3, dst1_color_map=0: output 32-bit YCbCrA 8888;
//        dst1_format=3, dst1_color_map=1: output 32-bit AYCbCr 8888;
//        dst1_format=3, dst1_color_map=2: output 32-bit ACrCbY 8888;
//        dst1_format=3, dst1_color_map=3: output 32-bit CrCbYA 8888.
//Bit 17:16 dst1_format,  00: 8bit, 01:16bit, 10:24bit, 11: 32bit
//Bit 15    if true, src2 little endian, otherwise big endian
//Bit 14:11  src2 color_map
//        src2_format=0                 : output 8-bit;
//        src2_format=1, src2_color_map=1: output 16-bit YCbCr  655;
//        src2_format=1, src2_color_map=2: output 16-bit YCbCr  844;
//        src2_format=1, src2_color_map=3: output 16-bit YCbCrA 6442;
//        src2_format=1, src2_color_map=4: output 16-bit YCbCrA 4444;
//        src2_format=1, src2_color_map=5: output 16-bit YCbCr  565;
//        src2_format=1, src2_color_map=6: output 16-bit AYCbCr 4444;
//        src2_format=1, src2_color_map=7: output 16-bit AYCbCr 1555;
//        src2_format=1, src2_color_map=8: output 16-bit YCbCrA 4642;
//        src2_format=2, src2_color_map=0: output 24-bit YCbCr  888;
//        src2_format=2, src2_color_map=1: output 24-bit YCbCrA 5658;
//        src2_format=2, src2_color_map=2: output 24-bit AYCbCr 8565;
//        src2_format=2, src2_color_map=3: output 24-bit YCbCrA 6666;
//        src2_format=2, src2_color_map=4: output 24-bit AYCbCr 6666;
//        src2_format=2, src2_color_map=5: output 24-bit CrCbY  888;
//        src2_format=3, src2_color_map=0: output 32-bit YCbCrA 8888;
//        src2_format=3, src2_color_map=1: output 32-bit AYCbCr 8888;
//        src2_format=3, src2_color_map=2: output 32-bit ACrCbY 8888;
//        src2_format=3, src2_color_map=3: output 32-bit CrCbYA 8888.
//Bit 9:8 src2 format, 00: 8bit, 01:16bit, 10:24bit 11: 32bit
//Bit 7     if true, src1 little endian, otherwise big endian
//Bit 6:3   src1 color_map
//        src1_format=0                 : output 8-bit;
//        src1_format=1, src1_color_map=0: output 4:2:2  (Y0Cb0Y1Cr0);
//        src1_format=1, src1_color_map=1: output 16-bit YCbCr  655;
//        src1_format=1, src1_color_map=2: output 16-bit YCbCr  844;
//        src1_format=1, src1_color_map=3: output 16-bit YCbCrA 6442;
//        src1_format=1, src1_color_map=4: output 16-bit YCbCrA 4444;
//        src1_format=1, src1_color_map=5: output 16-bit YCbCr  565;
//        src1_format=1, src1_color_map=6: output 16-bit AYCbCr 4444;
//        src1_format=1, src1_color_map=7: output 16-bit AYCbCr 1555;
//        src1_format=1, src2_color_map=8: output 16-bit YCbCrA 4642;
//        src1_format=2, src1_color_map=0: output 24-bit YCbCr  888;
//        src1_format=2, src1_color_map=1: output 24-bit YCbCrA 5658;
//        src1_format=2, src1_color_map=2: output 24-bit AYCbCr 8565;
//        src1_format=2, src1_color_map=3: output 24-bit YCbCrA 6666;
//        src1_format=2, src1_color_map=4: output 24-bit AYCbCr 6666;
//        src1_format=2, src1_color_map=5: output 24-bit CrCbY  888;
//        src1_format=2, src1_color_map=14:output 8-bit Y and 16-bit CbCr;
//        src1_format=2, src1_color_map=15:output 8-bit Y and 16-bit CrCb;
//        src1_format=3, src1_color_map=0: output 32-bit YCbCrA 8888;
//        src1_format=3, src1_color_map=1: output 32-bit AYCbCr 8888;
//        src1_format=3, src1_color_map=2: output 32-bit ACrCbY 8888;
//        src1_format=3, src1_color_map=3: output 32-bit CrCbYA 8888.
//Bit 1:0 src1 format, 00: 8bit, 01:16bit/4:2:2, 10:24bit 11: 32bit
#define GE2D_GEN_CTRL2                             ((0x00a2  << 2) + 0xff940000)
//Bit 9     if true, all src2 data use default color
//Bit 8     if true, all src1 data use default color
//Bit 7     if true, dst x/y swap
//Bit 6     if true, dst x direction reversely read
//Bit 5     if true, dst y direction reversely read
//Bit 4     if true, src2 x direction reversely read
//Bit 3     if true, src2 y direction reversely read
//Bit 2     if true, src1 x direction reversely read
//Bit 1     if true, src1 y direction reversely read
//Bit 0     cmd write
#define GE2D_CMD_CTRL                              ((0x00a3  << 2) + 0xff940000)
//Read only
//Bit 28:17 dst write response counter, for debug only
//Bit 16:7  ge2d_dp status, for debug only
//Bit 6     read src1 cmd ready
//Bit 5     read src2 cmd ready
//Bit 4     pre dpcmd ready
//Bit 3     ge2d dpcmd ready
//Bit 2     ge2d buffer command valid
//Bit 1     ge2d current command valid
//Bit 0     ge2d busy
#define GE2D_STATUS0                               ((0x00a4  << 2) + 0xff940000)
//
//Read only
// Bit 29:16 ge2d_dst1_status, for debug only
// Bit    15 ge2d_rd_src2 core.fifo_empty
// Bit    14 ge2d_rd_src2 core.fifo_overflow
// Bit 13:12 ge2d_rd_src2 core.req_st
// Bit    11 ge2d_rd_src2 cmd_if.cmd_err, true if cmd_format=1
// Bit    10 ge2d_rd_src2 cmd_if.cmd_st, 0=IDLE state, 1=BUSY state
// Bit     9 ge2d_rd_src1 luma_core(chroma_core).fifo_empty
// Bit     8 ge2d_rd_src1 luma_core(chroma_core).fifo_overflow
// Bit  7: 6 ge2d_rd_src1 chroma_core.req_st_cr
// Bit  5: 4 ge2d_rd_src1 chroma_core.req_st_cb
// Bit  3: 2 ge2d_rd_src1 luma_core.req_st_y
// Bit     1 ge2d_rd_src1 cmd_if.stat_read_window_err, 1=reading/clipping window setting exceed limit
// Bit     0 ge2d_rd_src1 cmd_if.cmd_st, 0=IDLE state, 1=BUSY state
#define GE2D_STATUS1                               ((0x00a5  << 2) + 0xff940000)
//SRC1 default clolor
//{Y,Cb,Cr,A}/{R,G,B,A}
#define GE2D_SRC1_DEF_COLOR                        ((0x00a6  << 2) + 0xff940000)
//Bit 31, SRC1 clip x start extra, if true, one more data is read for chroma
//Bit 28:16, SRC1 clip x start
//Bit 15, SRC1 clip x end extra, if true, one more data is read for chroma
//Bit 12:0, SRC1 clip x end
#define GE2D_SRC1_CLIPX_START_END                  ((0x00a7  << 2) + 0xff940000)
//Bit 31, SRC1 clip y start extra, if true, one more data is read for chroma
//Bit 28:16, SRC1 clip y start
//Bit 15, SRC1 clip y end extra, if true, one more data is read for chroma
//Bit 12:0, SRC1 clip y end
#define GE2D_SRC1_CLIPY_START_END                  ((0x00a8  << 2) + 0xff940000)
//Bit 31:24, SRC1 canvas address0
//Bit 23:16, SRC1 canvas address1
//Bit 15:8, SRC1 canvas address2
#define GE2D_SRC1_CANVAS                           ((0x00a9  << 2) + 0xff940000)
//Bit 31, SRC1 x start extra bit1, if true, one more chroma data is read for x even start chroma data when y/c ratio = 2
//             or x even/odd start chroma extra data when y/c ratio = 1
//Bit 30, SRC1 x start extra bit0, if true, one more chroma data is read for x odd start chroma data when y/c ratio = 2
//Bit 29:16, SRC1 x start, signed data
//Bit 15, SRC1 x end extra bit1, if true, one more chroma data is read for x odd end chroma data when y/c ratio = 2
//             or x even/odd end chroma extra data when y/c ratio = 1
//Bit 14, SRC1 x end extra bit0, if true, one more chroma data is read for x even end chroma data when y/c ratio = 2
//Bit 13:0, SRC1 x end, signed data
#define GE2D_SRC1_X_START_END                      ((0x00aa  << 2) + 0xff940000)
//Bit 31, SRC1 y start extra, if true, one more chroma data is read for y even start chroma data when y/c ratio = 2
//             or y even/odd start chroma extra data when y/c ratio = 1
//Bit 30, SRC1 y start extra, if true, one more chroma data is read for x odd start chroma data when y/c ratio = 2
//Bit 28:16, SRC1 y start
//Bit 15, SRC1 y end extra bit1, if true, one more chroma data is read for y odd end chroma data when y/c ratio = 2
//             or y even/odd end chroma extra data when y/c ratio = 1
//Bit 14, SRC1 y end extra bit0, if true, one more chroma data is read for y even end chroma data when y/c ratio = 2
//Bit 12:0, SRC1 y end
#define GE2D_SRC1_Y_START_END                      ((0x00ab  << 2) + 0xff940000)
// Bit 31: 9 Reserved
// Bit     8 RW, 0 = Write LUT, 1 = Read LUT
// Bit  7: 0 RW, lut_addr
#define GE2D_SRC1_LUT_ADDR                         ((0x00ac  << 2) + 0xff940000)
// Bit 31:24 RW, Y or R
// Bit 23:16 RW, Cb or G
// Bit 15: 8 RW, Cr or B
// Bit  7: 0 RW, Alpha
#define GE2D_SRC1_LUT_DAT                          ((0x00ad  << 2) + 0xff940000)
//Bit 19, if true, horizontal formatter using repeat to get the pixel, otherwise using interpolation
//Bit 18, horizontal formatter en
//Bit 17, if true, vertical formatter using repeat to get the pixel, otherwise using interpolation
//Bit 16, vertical formatter en
//Bit 15:8 X direction chroma phase,
//          [7:4] for x direction even start/end chroma phase when y/c ratio = 2
//                or start/end even/odd chroma phase  when y/c ratio = 1
//          [3:0] for x direction odd start/end chroma phase only when y/c ration = 2
//Bit 7:0  Y direction chroma phase,
//          [7:4] for y direction even start/end chroma phase when y/c ratio = 2
//          or start/end even/odd chroma phase  when y/c ratio = 1
//          [3:0] for y direction odd start/end chroma phase only when y/c ration = 2
#define GE2D_SRC1_FMT_CTRL                         ((0x00ae  << 2) + 0xff940000)
//SRC2 default clolor
//{Y,Cb,Cr,A}/{R,G,B,A}
#define GE2D_SRC2_DEF_COLOR                        ((0x00af  << 2) + 0xff940000)
//Bit 28:16, SRC2 clip x start
//Bit 12:0, SRC2 clip x end
#define GE2D_SRC2_CLIPX_START_END                  ((0x00b0  << 2) + 0xff940000)
//Bit 28:16, SRC2 clip y start
//Bit 12:0, SRC2 clip y end
#define GE2D_SRC2_CLIPY_START_END                  ((0x00b1  << 2) + 0xff940000)
//Bit 28:16, SRC2 x start
//Bit 12:0, SRC2 x end
#define GE2D_SRC2_X_START_END                      ((0x00b2  << 2) + 0xff940000)
//Bit 28:16, SRC2 y start
//Bit 12:0, SRC2 y end
#define GE2D_SRC2_Y_START_END                      ((0x00b3  << 2) + 0xff940000)
//Bit 28:16, DST clip x start
//Bit 12:0, DST clip x end
#define GE2D_DST_CLIPX_START_END                   ((0x00b4  << 2) + 0xff940000)
//
//Bit 28:16, DST clip y start
//Bit 12:0, DST clip y end
#define GE2D_DST_CLIPY_START_END                   ((0x00b5  << 2) + 0xff940000)
//Bit 28:16, DST x start
//Bit 12:0, DST x end
#define GE2D_DST_X_START_END                       ((0x00b6  << 2) + 0xff940000)
//
//Bit 28:16, DST x start
//Bit 12:0, DST x end
#define GE2D_DST_Y_START_END                       ((0x00b7  << 2) + 0xff940000)
//Bit 23:16 DST2 canvas address
//Bit 15:8 SRC2 canvas address
//Bit 7:0 DST1 canvas address
#define GE2D_SRC2_DST_CANVAS                       ((0x00b8  << 2) + 0xff940000)
//vertical scaler phase step
//Bit 28:0,  5.24 format
#define GE2D_VSC_START_PHASE_STEP                  ((0x00b9  << 2) + 0xff940000)
//phase slope
//Bit 24:0, bit 24 signed bit
#define GE2D_VSC_PHASE_SLOPE                       ((0x00ba  << 2) + 0xff940000)
//Bit 30:29, vertical repeat line0 number
//Bit 23:0, vertical scaler initial phase
#define GE2D_VSC_INI_CTRL                          ((0x00bb  << 2) + 0xff940000)
//horizontal scaler phase step
//Bit 28:0,  5.24 format
#define GE2D_HSC_START_PHASE_STEP                  ((0x00bc  << 2) + 0xff940000)
//phase slope
//Bit 24:0, bit 24 signed bit
#define GE2D_HSC_PHASE_SLOPE                       ((0x00bd  << 2) + 0xff940000)
//Bit 30:29, horizontal repeat line0 number
//Bit 23:0, horizontal scaler initial phase
#define GE2D_HSC_INI_CTRL                          ((0x00be  << 2) + 0xff940000)
//Bit 31:24, advance number in this round, if horizontal scaler is working on dividing mode
//Bit 23:0, horizontal scaler advance phase in this round, if horizontal scaler is working on dividing mode
#define GE2D_HSC_ADV_CTRL                          ((0x00bf  << 2) + 0xff940000)
//Bit 30, vertical nearest mode enable, must set vt_bank_length = 4
//Bit 29, horizontal nearest mode enable, must set hz_bank_length = 4
//Bit 28, horizontal scaler dividing mode enable
//Bit 27:15, horizontal dividing length, if bit 28 is enable
//Bit 14, pre horizontal scaler enable
//Bit 13, pre vertical scale enable
//Bit 12, vertical scale enable
//Bit 11, horizontal scaler enable
//Bit 9, if true, treat horizontal repeat line number(GE2D_HSC_INI_CTRL bit 30:29) as repeating line,
//        otherwise using treat horizontal repeat line number as minus line number.
//Bit 8, if true, treat vertical repeat line number(GE2D_VSC_INI_CTRL bit 30:29) as repeating line,
//        otherwise using treat vertical repeat line number as minus line number.
//Bit 7, if true, always use phase0 in vertical scaler
//Bit 6:4, vertical scaler bank length
//Bit 3, if true, always use phase0 in horizontal scaler
//Bit 2:0, horizontal scaler bank length
#define GE2D_SC_MISC_CTRL                          ((0x00c0  << 2) + 0xff940000)
//Read only
//vertical scaler next round integer pixel pointer, signed data
//Bit 13:0
#define GE2D_VSC_NRND_POINT                        ((0x00c1  << 2) + 0xff940000)
//Read only
//vertical scaler next round phase
//bit 23:0
#define GE2D_VSC_NRND_PHASE                        ((0x00c2  << 2) + 0xff940000)
//Read only
//horizontal scaler next round integer pixel pointer, signed data
//Bit 13:0
#define GE2D_HSC_NRND_POINT                        ((0x00c3  << 2) + 0xff940000)
//Read only
//horizontal scaler next round phase
//bit 23:0
#define GE2D_HSC_NRND_PHASE                        ((0x00c4  << 2) + 0xff940000)
//
//Bit 28:20, pre_offset0
//Bit 18:10, pre_offset1
//Bit 8:0,   pre_offset2
#define GE2D_MATRIX_PRE_OFFSET                     ((0x00c5  << 2) + 0xff940000)
//Bit 28:16 coef00
//Bit 12:0  coef01
#define GE2D_MATRIX_COEF00_01                      ((0x00c6  << 2) + 0xff940000)
//Bit 28:16 coef02
//Bit 12:0  coef10
#define GE2D_MATRIX_COEF02_10                      ((0x00c7  << 2) + 0xff940000)
//Bit 28:16 coef11
//Bit 12:0  coef12
#define GE2D_MATRIX_COEF11_12                      ((0x00c8  << 2) + 0xff940000)
//Bit 28:16 coef20
//Bit 12:0  coef21
#define GE2D_MATRIX_COEF20_21                      ((0x00c9  << 2) + 0xff940000)
//Bit 28:16 coef22
//Bit 7    input y/cb/cr saturation enable
//Bit 0    conversion matrix enable
#define GE2D_MATRIX_COEF22_CTRL                    ((0x00ca  << 2) + 0xff940000)
//Bit 28:20, offset0
//Bit 18:10, offset1
//Bit 8:0,   offset2
#define GE2D_MATRIX_OFFSET                         ((0x00cb  << 2) + 0xff940000)
//Bit 26:25, SRC1 color multiplier alpha selection
//           if 00, Cs = Csr
//           if 01, Cs = Csr * Asr * Ag (if source is not premultiplied)
//           if 10, Cs = Csr * Ag (if source is premultipied)
//Bit 24    SRC2 color multiplier alpha selection
//          if 0, no multiplier, Cd = Cdr,  otherwise, Cd = Cdr * Ad.
//Bit 22:12 ALU color operation
//          bit10:8 Blending Mode Parameter
//            3'b000: ADD               Cs*Fs + Cd*Fd
//            3'b001: SUBTRACT          Cs*Fs - Cd*Fd
//            3'b010: REVERSE SUBTRACT  Cd*Fd - Cs*Fs
//            3'b011: MIN               min(Cs*Fs, Cd*Fd)
//            3'b100: MAX               max(Cs*Fs, Cd*Fd)
//            3'b101: LOGIC OP          Cs op Cd
//          bit7:4 Source Color Blending Factor CFs
//            4'b0000: ZERO                        0
//            4'b0001: ONE                         1
//            4'b0010: SRC_COLOR                   Cs(RGBs)
//            4'b0011: ONE_MINUS_SRC_COLOR         1 - Cs(RGBs)
//            4'b0100: DST_COLOR                   Cd(RGBd)
//            4'b0101: ONE_MINUS_DST_COLOR         1 - Cd(RGBd)
//            4'b0110: SRC_ALPHA                   As
//            4'b0111: ONE_MINUS_SRC_ALPHA         1 - As
//            4'b1000: DST_ALPHA                   Ad
//            4'b1001: ONE_MINUS_DST_ALPHA         1 - Ad
//            4'b1010: CONST_COLOR                 Cc(RGBc)
//            4'b1011: ONE_MINUS_CONST_COLOR       1 - Cc(RGBc)
//            4'b1100: CONST_ALPHA                 Ac
//            4'b1101: ONE_MINUS_CONST_ALPHA       1 - Ac
//            4'b1110: SRC_ALPHA_SATURATE          min(As,1-Ad)
//          bit3:0 dest Color Blending Factor CFd, when bit10:8 != LOGIC OP
//            4'b0000: ZERO                        0
//            4'b0001: ONE                         1
//            4'b0010: SRC_COLOR                   Cs(RGBs)
//            4'b0011: ONE_MINUS_SRC_COLOR         1 - Cs(RGBs)
//            4'b0100: DST_COLOR                   Cd(RGBd)
//            4'b0101: ONE_MINUS_DST_COLOR         1 - Cd(RGBd)
//            4'b0110: SRC_ALPHA                   As
//            4'b0111: ONE_MINUS_SRC_ALPHA         1 - As
//            4'b1000: DST_ALPHA                   Ad
//            4'b1001: ONE_MINUS_DST_ALPHA         1 - Ad
//            4'b1010: CONST_COLOR                 Cc(RGBc)
//            4'b1011: ONE_MINUS_CONST_COLOR       1 - Cc(RGBc)
//            4'b1100: CONST_ALPHA                 Ac
//            4'b1101: ONE_MINUS_CONST_ALPHA       1 - Ac
//            4'b1110: SRC_ALPHA_SATURATE          min(As,1-Ad)
//          bit3:0 logic operations, when bit10:8 == LOGIC OP
//            4'b0000: CLEAR                       0
//            4'b0001: COPY                        s
//            4'b0010: NOOP                        d
//            4'b0011: SET                         1
//            4'b0100: COPY_INVERT                 ~s
//            4'b0101: INVERT                      ~d
//            4'b0110: AND_REVERSE                 s & ~d
//            4'b0111: OR_REVERSE                  s | ~d
//            4'b1000: AND                         s & d
//            4'b1001: OR                          s | d
//            4'b1010: NAND                        ~(s & d)
//            4'b1011: NOR                         ~(s | d)
//            4'b1100: XOR                         s ^ d
//            4'b1101: EQUIV                       ~(s ^ d)
//            4'b1110: AND_INVERTED                ~s & d
//            4'b1111: OR_INVERTED                 ~s | d
//Bit 10:0  ALU alpha operation
//            bit10:8 Blending Equation Math Operation
//              3'b000: ADD               As*Fs + Ad*Fd
//              3'b001: SUBTRACT          As*Fs - Ad*Fd
//              3'b010: REVERSE SUBTRACT  Ad*Fd - As*Fs
//              3'b011: MIN               min(As*Fs, Ad*Fd)
//              3'b100: MAX               max(As*Fs, Ad*Fd)
//              3'b101: LOGIC OP          As op Ad
//            bit7:4 Source alpha Blending Factor AFs
//              4'b0000                       0
//              4'b0001                       1
//              4'b0010                       As
//              4'b0011                       1 - As
//              4'b0100                       Ad
//              4'b0101                       1 - Ad
//              4'b0110                       Ac
//              4'b0111                       1 - Ac
//               ....                         reserved
//            bit3:0 Destination alpha Blending Factor AFd, when bit10:8 != LOGIC OP
//              4'b0000                       0
//              4'b0001                       1
//              4'b0010                       As
//              4'b0011                       1 - As
//              4'b0100                       Ad
//              4'b0101                       1 - Ad
//              4'b0110                       Ac
//              4'b0111                       1 - Ac
//               ....                         reserved
//            bit3:0 logic operations, when bit10:8 == LOGIC OP
//              4'b0000: CLEAR                       0
//              4'b0001: COPY                        s
//              4'b0010: NOOP                        d
//              4'b0011: SET                         1
//              4'b0100: COPY_INVERT                 ~s
//              4'b0101: INVERT                      ~d
//              4'b0110: AND_REVERSE                 s & ~d
//              4'b0111: OR_REVERSE                  s | ~d
//              4'b1000: AND                         s & d
//              4'b1001: OR                          s | d
//              4'b1010: NAND                        ~(s & d)
//              4'b1011: NOR                         ~(s | d)
//              4'b1100: XOR                         s ^ d
//              4'b1101: EQUIV                       ~(s ^ d)
//              4'b1110: AND_INVERTED                ~s & d
//              4'b1111: OR_INVERTED                 ~s | d
#define GE2D_ALU_OP_CTRL                           ((0x00cc  << 2) + 0xff940000)
//bit 31:0 (RGBA,YCBCRA)
#define GE2D_ALU_CONST_COLOR                       ((0x00cd  << 2) + 0xff940000)
//SRC1 Key
//31:0
#define GE2D_SRC1_KEY                              ((0x00ce  << 2) + 0xff940000)
//SRC1 Key Mask
//31:0
#define GE2D_SRC1_KEY_MASK                         ((0x00cf  << 2) + 0xff940000)
//SRC2 Key
//31:0
#define GE2D_SRC2_KEY                              ((0x00d0  << 2) + 0xff940000)
//SRC2 Key Mask
//31:0
#define GE2D_SRC2_KEY_MASK                         ((0x00d1  << 2) + 0xff940000)
//Destination Bit Mask
//31:0
#define GE2D_DST_BITMASK                           ((0x00d2  << 2) + 0xff940000)
//Bit 31    DP onoff mode, 0: on_counter means how many pixels will output before ge2d turns off
//                         1: on_counter means how many clocks will ge2d turn on before ge2d turns off
//Bit 30:16     DP on counter
//Bit 15        0: vd_format doesnt have onoff mode, 1: vd format has onoff mode
//Bit 14:0      DP off counter
#define GE2D_DP_ONOFF_CTRL                         ((0x00d3  << 2) + 0xff940000)
//Because there are many coefficients used in the vertical filter and horizontal filters,
//indirect access the coefficients of vertical filter and horizontal filter is used.
//For vertical filter, there are 33x4 coefficients
//For horizontal filter, there are 33x4 coefficients
//Bit 15	index increment, if bit9 == 1  then (0: index increase 1, 1: index increase 2) else (index increase 2)
//Bit 14	1: read coef through cbus enable, just for debug purpose in case when we wanna check the coef in ram in correct or not
//Bit 9     if true, use 9bit resolution coef, other use 8bit resolution coef
//Bit 8	    type of index, 0: vertical coef
//						   1: horizontal coef
//Bit 6:0 	coef index
#define GE2D_SCALE_COEF_IDX                        ((0x00d4  << 2) + 0xff940000)
//coefficients for vertical filter and horizontal filter
#define GE2D_SCALE_COEF                            ((0x00d5  << 2) + 0xff940000)
//Bit 24    src2 alpha fill mode: together with GE2D_GEN_CTRL0[4](fill_mode), define what alpha values are used
//                                for the area outside the clipping window. As below:
//                                fill_mode=0, alpha_fill_mode=0 : use inner alpha, (or default_alpha if src data have no alpha values);
//                                fill_mode=0, alpha_fill_mode=1 : use outside_alpha;
//                                fill_mode=1, alpha_fill_mode=0 : use default_alpha;
//                                fill_mode=1, alpha_fill_mode=1 : use outside_alpha.
//Bit 23:16 src2 outside alpha
//Bit 8     src1 alpha fill mode, refer to src2 alpha fill mode above.
//Bit 7:0   src1 outside alpha
#define GE2D_SRC_OUTSIDE_ALPHA                     ((0x00d6  << 2) + 0xff940000)
//Bit 31       antiflick enable
//Bit 24       1: alpha value for the first line use repeated alpha, 0: use bit 23:16 as the first line alpha
//Bit 23:16     register value for the first line alpha when bit 24 is 1
//Bit 8        1: alpha value for the last line use repeated alpha, 0: use bit 7:0 as the last line alpha
//Bit 7:0      register value for the last line alpha when bit 8 is 1
#define GE2D_ANTIFLICK_CTRL0                       ((0x00d8  << 2) + 0xff940000)
//Bit 25,    rgb_sel, 1: antiflick RGBA, 0: antiflick YCbCrA
//Bit 24,    cbcr_en, 1: also filter cbcr in case of antiflicking YCbCrA, 0: no filter on cbcr in case of antiflicking YCbCrA
//Bit 23:16, R mult coef for converting RGB to Y
//Bit 15:8,  G mult coef for converting RGB to Y
//Bit 7:0,   B mult coef for converting RGB to Y
//Y = (R * y_r + G * y_g + B * y_b) / 256
#define GE2D_ANTIFLICK_CTRL1                       ((0x00d9  << 2) + 0xff940000)
//Bit 31:24, Y threhold1, when   0<Y<=th1, use filter0;
//Bit 23:16, color antiflick filter0 n3
//Bit 15:8,  color antiflick filter0 n2
//Bit 7:0,   color antiflick filter0 n1
//Y = (line_up * n1 + line_center * n2 + line_dn * n3) / 128
#define GE2D_ANTIFLICK_COLOR_FILT0                 ((0x00da  << 2) + 0xff940000)
//Bit 31:24, Y threhold2, when th1<Y<=th2, use filter1;
//Bit 23:16, color antiflick filter1 n3
//Bit 15:8,  color antiflick filter1 n2
//Bit 7:0,   color antiflick filter1 n1
#define GE2D_ANTIFLICK_COLOR_FILT1                 ((0x00db  << 2) + 0xff940000)
//Bit 31:24, Y threhold3, when th2<Y<=th3, use filter2; Y>th3, use filter3
//Bit 23:16, color antiflick filter2 n3
//Bit 15:8,  color antiflick filter2 n2
//Bit 7:0,   color antiflick filter2 n1
#define GE2D_ANTIFLICK_COLOR_FILT2                 ((0x00dc  << 2) + 0xff940000)
//Bit 23:16, color antiflick filter3 n3
//Bit 15:8,  color antiflick filter3 n2
//Bit 7:0,   color antiflick filter3 n1
#define GE2D_ANTIFLICK_COLOR_FILT3                 ((0x00dd  << 2) + 0xff940000)
//Bit 31:24, Alpha threhold1, when   0<Alpha<=th1, use filter0;
//Bit 23:16, Alpha antiflick filter0 n3
//Bit 15:8,  Alpha antiflick filter0 n2
//Bit 7:0,   Alpha antiflick filter0 n1
//Alpha = (line_up * n1 + line_center * n2 + line_dn * n3) / 128
#define GE2D_ANTIFLICK_ALPHA_FILT0                 ((0x00de  << 2) + 0xff940000)
//Bit 31:24, Alpha threhold2, when th1<Alpha<=th2, use filter1;
//Bit 23:16, Alpha antiflick filter1 n3
//Bit 15:8,  Alpha antiflick filter1 n2
//Bit 7:0,   Alpha antiflick filter1 n1
#define GE2D_ANTIFLICK_ALPHA_FILT1                 ((0x00df  << 2) + 0xff940000)
//Bit 31:24, Alpha threhold3, when th2<Alpha<=th3, use filter2; Alpha>th3, use filter3
//Bit 23:16, Alpha antiflick filter2 n3
//Bit 15:8,  Alpha antiflick filter2 n2
//Bit 7:0,   Alpha antiflick filter2 n1
#define GE2D_ANTIFLICK_ALPHA_FILT2                 ((0x00e0  << 2) + 0xff940000)
//Bit 23:16, Alpha antiflick filter3 n3
//Bit 15:8,  Alpha antiflick filter3 n2
//Bit 7:0,   Alpha antiflick filter3 n1
#define GE2D_ANTIFLICK_ALPHA_FILT3                 ((0x00e1  << 2) + 0xff940000)
//dout = clipto_0_255(((din + din_offset) * map_coef + ((1 << (map_sr - 1))) >> map_sr + dout_offset)
//Bit 30:22 din_offset (signed data)
//Bit 21:14 map_coef (unsigned data)
//Bit 13:10 map_sr (unsigned data)
//Bit 9:1   dout_offset (signed data)
//Bit 0     enable
#define GE2D_SRC1_RANGE_MAP_Y_CTRL                 ((0x00e3  << 2) + 0xff940000)
//dout = clipto_0_255(((din + din_offset) * map_coef + ((1 << (map_sr - 1))) >> map_sr + dout_offset)
//Bit 30:22 din_offset (signed data)
//Bit 21:14 map_coef (unsigned data)
//Bit 13:10 map_sr (unsigned data)
//Bit 9:1   dout_offset (signed data)
//Bit 0     enable
#define GE2D_SRC1_RANGE_MAP_CB_CTRL                ((0x00e4  << 2) + 0xff940000)
//dout = clipto_0_255(((din + din_offset) * map_coef + ((1 << (map_sr - 1))) >> map_sr + dout_offset)
//Bit 30:22 din_offset (signed data)
//Bit 21:14 map_coef (unsigned data)
//Bit 13:10 map_sr (unsigned data)
//Bit 9:1   dout_offset (signed data)
//Bit 0     enable
#define GE2D_SRC1_RANGE_MAP_CR_CTRL                ((0x00e5  << 2) + 0xff940000)
//Bit 21:16     src1 prearbitor burst number
//Bit 13:8      src2 prearbitor burst number
//Bit 5:0       dst prearbitor burst number
#define GE2D_ARB_BURST_NUM                         ((0x00e6  << 2) + 0xff940000)
//each 6bit ID, high 4bit are thread ID, low 2bits are the token
//Bit 21:16 src1 ID
//Bit 13:8 src2 ID
//Bit 5:0  dst ID
#define GE2D_TID_TOKEN                             ((0x00e7  << 2) + 0xff940000)
//Bit 31:28 dst2_bytemask_val. 1-bit mask for each byte (8-bit). Applicable only if both dst_bitmask_en=1 and dst_bytemask_only=1.
//Bit 27:26, dst2 picture struct, 00: frame, 10:top, 11: bottom
//Bit 25:24, dst2 8bit mode component selection,
//            00: select Y(R), 01: Cb(G), 10: Cr(B), 11: Alpha
//Bit 22:19 dst2 color_map
//        dst2_format=0                  : output 8-bit;
//        dst2_format=1, dst2_color_map=1: output 16-bit YCbCr  655;
//        dst2_format=1, dst2_color_map=2: output 16-bit YCbCr  844;
//        dst2_format=1, dst2_color_map=3: output 16-bit YCbCrA 6442;
//        dst2_format=1, dst2_color_map=4: output 16-bit YCbCrA 4444;
//        dst2_format=1, dst2_color_map=5: output 16-bit YCbCr  565;
//        dst2_format=1, dst2_color_map=6: output 16-bit AYCbCr 4444;
//        dst2_format=1, dst2_color_map=7: output 16-bit AYCbCr 1555;
//        dst2_format=1, dst2_color_map=8: output 16-bit YCbCrA 4642;
//        dst2_format=1, dst2_color_map=9: output 16-bit CbCr   88;
//        dst2_format=1, dst2_color_map=10:output 16-bit CrCb   88;
//        dst2_format=2, dst2_color_map=0: output 24-bit YCbCr  888;
//        dst2_format=2, dst2_color_map=1: output 24-bit YCbCrA 5658;
//        dst2_format=2, dst2_color_map=2: output 24-bit AYCbCr 8565;
//        dst2_format=2, dst2_color_map=3: output 24-bit YCbCrA 6666;
//        dst2_format=2, dst2_color_map=4: output 24-bit AYCbCr 6666;
//        dst2_format=2, dst2_color_map=5: output 24-bit CrCbY  888;
//        dst2_format=3, dst2_color_map=0: output 32-bit YCbCrA 8888;
//        dst2_format=3, dst2_color_map=1: output 32-bit AYCbCr 8888;
//        dst2_format=3, dst2_color_map=2: output 32-bit ACrCbY 8888;
//        dst2_format=3, dst2_color_map=3: output 32-bit CrCbYA 8888.
//Bit 17:16 dst2_format,  00: 8bit, 01:16bit, 10:24bit, 11: 32bit
//Bit 15     reserved
//Bit 14     dst2_color_round_mode, 0: truncate, 1: + 0.5 rounding
//Bit 13:12, dst2_x_discard_mode. 00: no discard; 10=discard even x; 11=discard odd x. Note: x is post reverse/rotation.
//Bit 11:10, dst2_y_discard_mode. 00: no discard; 10=discard even y; 11=discard odd y. Note: y is post reverse/rotation.
//Bit     9 reserved
//Bit     8, dst2_enable. 0: disable dst2 (default); 1=enable dst2.
//Bit  7: 6 reserved
//Bit  5: 4, dst1_x_discard_mode. 00: no discard; 10=discard even x; 11=discard odd x. Note: x is post reverse/rotation.
//Bit  3: 2, dst1_y_discard_mode. 00: no discard; 10=discard even y; 11=discard odd y. Note: y is post reverse/rotation.
//Bit     1 reserved
//Bit     0, dst1_enable. 0: disable dst1; 1=enable dst1 (default).
#define GE2D_GEN_CTRL3                             ((0x00e8  << 2) + 0xff940000)
//Read only
// Bit 13:0 ge2d_dst2_status, for debug only
#define GE2D_STATUS2                               ((0x00e9  << 2) + 0xff940000)
//Bit 27:26  src1 Y fifo size control, 00: 512, 01: 256, 10: 128 11: 96
//Bit 25:24  src2 fifo size control, 00: 512, 01: 256, 10: 128 11: 96
//Bit 23:22  dst1 fifo size control, 00: 512, 01: 256, 10: 128 11: 64
//Bit 21:20  dst2 fifo size control, 00: 512, 01: 256, 10: 128 11: 64
//Bit 19:18, dst1 fifo burst control, 00: 24x64, 01: 32x64, 10: 48x64, 11:64x64
//Bit 17:16, dst2 fifo burst control, 00: 24x64, 01: 32x64, 10: 48x64, 11:64x64
//Bit 15:1, top_wrap_ctrl
//bit 0, if true, disable bug fix about the dp_out_done/scale_out_done(test1823) hang issue when scaling down ratio is high.
#define GE2D_GEN_CTRL4                             ((0x00ea  << 2) + 0xff940000)
#define GE2D_GCLK_CTRL0                            ((0x00ef  << 2) + 0xff940000)
#define GE2D_GCLK_CTRL1                            ((0x00f0  << 2) + 0xff940000)
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  ./ge2d_regs.h
//

// ----------------------------------------------------------------------
// This file is automatically generated from the script:
//
// ./create_headers_from_secure_apb4_h.pl
//
// and was applied to the file
//
// ./secure_apb4_ee.h ./ao_rti_reg.h
//
// DO NOT EDIT!!!!!
// ----------------------------------------------------------------------
//
#ifdef SECURE_APB_H
#else
#define SECURE_APB_H

//
// Reading file:  ./secure_apb4_ee.h
//
// synopsys translate_off
// synopsys translate_on
//========================================================================
//  RNG
//========================================================================
//  APB4_DECODER_NON_SECURE_BASE     32'hFF634000
//  APB4_DECODER_SECURE_BASE         32'hFF634000
#define     RNG_SEC_CONFIG_REG1                                (0xff634000 + (0x01 << 2))
#define SEC_RNG_SEC_CONFIG_REG1                                (0xff634000 + (0x01 << 2))
#define   P_RNG_SEC_CONFIG_REG1                                (volatile uint32_t *)(0xff634000 + (0x01 << 2))
#define     RNG_SEC_CONFIG_REG2                                (0xff634000 + (0x02 << 2))
#define SEC_RNG_SEC_CONFIG_REG2                                (0xff634000 + (0x02 << 2))
#define   P_RNG_SEC_CONFIG_REG2                                (volatile uint32_t *)(0xff634000 + (0x02 << 2))
#define     RNG_SEC_SCRATCH_REG                                (0xff634000 + (0x03 << 2))
#define SEC_RNG_SEC_SCRATCH_REG                                (0xff634000 + (0x03 << 2))
#define   P_RNG_SEC_SCRATCH_REG                                (volatile uint32_t *)(0xff634000 + (0x03 << 2))
#define     RNG_SEC_DATA                                       (0xff634000 + (0x04 << 2))
#define SEC_RNG_SEC_DATA                                       (0xff634000 + (0x04 << 2))
#define   P_RNG_SEC_DATA                                       (volatile uint32_t *)(0xff634000 + (0x04 << 2))
#define     RNG_SEC_STS                                        (0xff634000 + (0x05 << 2))
#define SEC_RNG_SEC_STS                                        (0xff634000 + (0x05 << 2))
#define   P_RNG_SEC_STS                                        (volatile uint32_t *)(0xff634000 + (0x05 << 2))
#define     RNG_USR_DATA                                       (0xff634000 + (0x06 << 2))
#define SEC_RNG_USR_DATA                                       (0xff634000 + (0x06 << 2))
#define   P_RNG_USR_DATA                                       (volatile uint32_t *)(0xff634000 + (0x06 << 2))
#define     RNG_USR_STS                                        (0xff634000 + (0x07 << 2))
#define SEC_RNG_USR_STS                                        (0xff634000 + (0x07 << 2))
#define   P_RNG_USR_STS                                        (volatile uint32_t *)(0xff634000 + (0x07 << 2))
//========================================================================
//  ACODEC
//========================================================================
//  APB4_DECODER_NON_SECURE_BASE     32'hFF632000
//  APB4_DECODER_SECURE_BASE         32'hFF632000
#define     ACODEC_0                                           (0xff632000 + (0x00 << 2))
#define SEC_ACODEC_0                                           (0xff632000 + (0x00 << 2))
#define   P_ACODEC_0                                           (volatile uint32_t *)(0xff632000 + (0x00 << 2))
#define     ACODEC_1                                           (0xff632000 + (0x01 << 2))
#define SEC_ACODEC_1                                           (0xff632000 + (0x01 << 2))
#define   P_ACODEC_1                                           (volatile uint32_t *)(0xff632000 + (0x01 << 2))
#define     ACODEC_2                                           (0xff632000 + (0x02 << 2))
#define SEC_ACODEC_2                                           (0xff632000 + (0x02 << 2))
#define   P_ACODEC_2                                           (volatile uint32_t *)(0xff632000 + (0x02 << 2))
#define     ACODEC_3                                           (0xff632000 + (0x03 << 2))
#define SEC_ACODEC_3                                           (0xff632000 + (0x03 << 2))
#define   P_ACODEC_3                                           (volatile uint32_t *)(0xff632000 + (0x03 << 2))
#define     ACODEC_4                                           (0xff632000 + (0x04 << 2))
#define SEC_ACODEC_4                                           (0xff632000 + (0x04 << 2))
#define   P_ACODEC_4                                           (volatile uint32_t *)(0xff632000 + (0x04 << 2))
#define     ACODEC_5                                           (0xff632000 + (0x05 << 2))
#define SEC_ACODEC_5                                           (0xff632000 + (0x05 << 2))
#define   P_ACODEC_5                                           (volatile uint32_t *)(0xff632000 + (0x05 << 2))
#define     ACODEC_6                                           (0xff632000 + (0x06 << 2))
#define SEC_ACODEC_6                                           (0xff632000 + (0x06 << 2))
#define   P_ACODEC_6                                           (volatile uint32_t *)(0xff632000 + (0x06 << 2))
#define     ACODEC_7                                           (0xff632000 + (0x07 << 2))
#define SEC_ACODEC_7                                           (0xff632000 + (0x07 << 2))
#define   P_ACODEC_7                                           (volatile uint32_t *)(0xff632000 + (0x07 << 2))
//========================================================================
//  PERIPHS
//========================================================================
//  APB4_DECODER_NON_SECURE_BASE     32'hFF634400
//  APB4_DECODER_SECURE_BASE         32'hFF634400
// The following are handled by $periphs/rtl/periphs_reg.v
#define     PREG_CTLREG0_ADDR                                  (0xff634400 + (0x00 << 2))
#define SEC_PREG_CTLREG0_ADDR                                  (0xff634400 + (0x00 << 2))
#define   P_PREG_CTLREG0_ADDR                                  (volatile uint32_t *)(0xff634400 + (0x00 << 2))
// ----------------------------
#define     PREG_PAD_GPIO6_EN_N                                (0xff634400 + (0x08 << 2))
#define SEC_PREG_PAD_GPIO6_EN_N                                (0xff634400 + (0x08 << 2))
#define   P_PREG_PAD_GPIO6_EN_N                                (volatile uint32_t *)(0xff634400 + (0x08 << 2))
#define     PREG_PAD_GPIO6_O                                   (0xff634400 + (0x09 << 2))
#define SEC_PREG_PAD_GPIO6_O                                   (0xff634400 + (0x09 << 2))
#define   P_PREG_PAD_GPIO6_O                                   (volatile uint32_t *)(0xff634400 + (0x09 << 2))
#define     PREG_PAD_GPIO6_I                                   (0xff634400 + (0x0a << 2))
#define SEC_PREG_PAD_GPIO6_I                                   (0xff634400 + (0x0a << 2))
#define   P_PREG_PAD_GPIO6_I                                   (volatile uint32_t *)(0xff634400 + (0x0a << 2))
// ----------------------------
// ----------------------------
#define     PREG_JTAG_GPIO_ADDR                                (0xff634400 + (0x0b << 2))
#define SEC_PREG_JTAG_GPIO_ADDR                                (0xff634400 + (0x0b << 2))
#define   P_PREG_JTAG_GPIO_ADDR                                (volatile uint32_t *)(0xff634400 + (0x0b << 2))
// ----------------------------
// Pre-defined GPIO addresses
// ----------------------------
#define     PREG_PAD_GPIO0_EN_N                                (0xff634400 + (0x0c << 2))
#define SEC_PREG_PAD_GPIO0_EN_N                                (0xff634400 + (0x0c << 2))
#define   P_PREG_PAD_GPIO0_EN_N                                (volatile uint32_t *)(0xff634400 + (0x0c << 2))
#define     PREG_PAD_GPIO0_O                                   (0xff634400 + (0x0d << 2))
#define SEC_PREG_PAD_GPIO0_O                                   (0xff634400 + (0x0d << 2))
#define   P_PREG_PAD_GPIO0_O                                   (volatile uint32_t *)(0xff634400 + (0x0d << 2))
#define     PREG_PAD_GPIO0_I                                   (0xff634400 + (0x0e << 2))
#define SEC_PREG_PAD_GPIO0_I                                   (0xff634400 + (0x0e << 2))
#define   P_PREG_PAD_GPIO0_I                                   (volatile uint32_t *)(0xff634400 + (0x0e << 2))
// ----------------------------
#define     PREG_PAD_GPIO1_EN_N                                (0xff634400 + (0x0f << 2))
#define SEC_PREG_PAD_GPIO1_EN_N                                (0xff634400 + (0x0f << 2))
#define   P_PREG_PAD_GPIO1_EN_N                                (volatile uint32_t *)(0xff634400 + (0x0f << 2))
#define     PREG_PAD_GPIO1_O                                   (0xff634400 + (0x10 << 2))
#define SEC_PREG_PAD_GPIO1_O                                   (0xff634400 + (0x10 << 2))
#define   P_PREG_PAD_GPIO1_O                                   (volatile uint32_t *)(0xff634400 + (0x10 << 2))
#define     PREG_PAD_GPIO1_I                                   (0xff634400 + (0x11 << 2))
#define SEC_PREG_PAD_GPIO1_I                                   (0xff634400 + (0x11 << 2))
#define   P_PREG_PAD_GPIO1_I                                   (volatile uint32_t *)(0xff634400 + (0x11 << 2))
// ----------------------------
#define     PREG_PAD_GPIO2_EN_N                                (0xff634400 + (0x12 << 2))
#define SEC_PREG_PAD_GPIO2_EN_N                                (0xff634400 + (0x12 << 2))
#define   P_PREG_PAD_GPIO2_EN_N                                (volatile uint32_t *)(0xff634400 + (0x12 << 2))
#define     PREG_PAD_GPIO2_O                                   (0xff634400 + (0x13 << 2))
#define SEC_PREG_PAD_GPIO2_O                                   (0xff634400 + (0x13 << 2))
#define   P_PREG_PAD_GPIO2_O                                   (volatile uint32_t *)(0xff634400 + (0x13 << 2))
#define     PREG_PAD_GPIO2_I                                   (0xff634400 + (0x14 << 2))
#define SEC_PREG_PAD_GPIO2_I                                   (0xff634400 + (0x14 << 2))
#define   P_PREG_PAD_GPIO2_I                                   (volatile uint32_t *)(0xff634400 + (0x14 << 2))
// ----------------------------
#define     PREG_PAD_GPIO3_EN_N                                (0xff634400 + (0x15 << 2))
#define SEC_PREG_PAD_GPIO3_EN_N                                (0xff634400 + (0x15 << 2))
#define   P_PREG_PAD_GPIO3_EN_N                                (volatile uint32_t *)(0xff634400 + (0x15 << 2))
#define     PREG_PAD_GPIO3_O                                   (0xff634400 + (0x16 << 2))
#define SEC_PREG_PAD_GPIO3_O                                   (0xff634400 + (0x16 << 2))
#define   P_PREG_PAD_GPIO3_O                                   (volatile uint32_t *)(0xff634400 + (0x16 << 2))
#define     PREG_PAD_GPIO3_I                                   (0xff634400 + (0x17 << 2))
#define SEC_PREG_PAD_GPIO3_I                                   (0xff634400 + (0x17 << 2))
#define   P_PREG_PAD_GPIO3_I                                   (volatile uint32_t *)(0xff634400 + (0x17 << 2))
// ----------------------------
#define     PREG_PAD_GPIO4_EN_N                                (0xff634400 + (0x18 << 2))
#define SEC_PREG_PAD_GPIO4_EN_N                                (0xff634400 + (0x18 << 2))
#define   P_PREG_PAD_GPIO4_EN_N                                (volatile uint32_t *)(0xff634400 + (0x18 << 2))
#define     PREG_PAD_GPIO4_O                                   (0xff634400 + (0x19 << 2))
#define SEC_PREG_PAD_GPIO4_O                                   (0xff634400 + (0x19 << 2))
#define   P_PREG_PAD_GPIO4_O                                   (volatile uint32_t *)(0xff634400 + (0x19 << 2))
#define     PREG_PAD_GPIO4_I                                   (0xff634400 + (0x1a << 2))
#define SEC_PREG_PAD_GPIO4_I                                   (0xff634400 + (0x1a << 2))
#define   P_PREG_PAD_GPIO4_I                                   (volatile uint32_t *)(0xff634400 + (0x1a << 2))
// ----------------------------
#define     PREG_PAD_GPIO5_EN_N                                (0xff634400 + (0x1b << 2))
#define SEC_PREG_PAD_GPIO5_EN_N                                (0xff634400 + (0x1b << 2))
#define   P_PREG_PAD_GPIO5_EN_N                                (volatile uint32_t *)(0xff634400 + (0x1b << 2))
#define     PREG_PAD_GPIO5_O                                   (0xff634400 + (0x1c << 2))
#define SEC_PREG_PAD_GPIO5_O                                   (0xff634400 + (0x1c << 2))
#define   P_PREG_PAD_GPIO5_O                                   (volatile uint32_t *)(0xff634400 + (0x1c << 2))
#define     PREG_PAD_GPIO5_I                                   (0xff634400 + (0x1d << 2))
#define SEC_PREG_PAD_GPIO5_I                                   (0xff634400 + (0x1d << 2))
#define   P_PREG_PAD_GPIO5_I                                   (volatile uint32_t *)(0xff634400 + (0x1d << 2))
// ----------------------------
// ----------------------------
// Pin Mux  (9)
// ----------------------------
#define     PERIPHS_PIN_MUX_0                                  (0xff634400 + (0x2c << 2))
#define SEC_PERIPHS_PIN_MUX_0                                  (0xff634400 + (0x2c << 2))
#define   P_PERIPHS_PIN_MUX_0                                  (volatile uint32_t *)(0xff634400 + (0x2c << 2))
#define     PERIPHS_PIN_MUX_1                                  (0xff634400 + (0x2d << 2))
#define SEC_PERIPHS_PIN_MUX_1                                  (0xff634400 + (0x2d << 2))
#define   P_PERIPHS_PIN_MUX_1                                  (volatile uint32_t *)(0xff634400 + (0x2d << 2))
#define     PERIPHS_PIN_MUX_2                                  (0xff634400 + (0x2e << 2))
#define SEC_PERIPHS_PIN_MUX_2                                  (0xff634400 + (0x2e << 2))
#define   P_PERIPHS_PIN_MUX_2                                  (volatile uint32_t *)(0xff634400 + (0x2e << 2))
#define     PERIPHS_PIN_MUX_3                                  (0xff634400 + (0x2f << 2))
#define SEC_PERIPHS_PIN_MUX_3                                  (0xff634400 + (0x2f << 2))
#define   P_PERIPHS_PIN_MUX_3                                  (volatile uint32_t *)(0xff634400 + (0x2f << 2))
#define     PERIPHS_PIN_MUX_4                                  (0xff634400 + (0x30 << 2))
#define SEC_PERIPHS_PIN_MUX_4                                  (0xff634400 + (0x30 << 2))
#define   P_PERIPHS_PIN_MUX_4                                  (volatile uint32_t *)(0xff634400 + (0x30 << 2))
#define     PERIPHS_PIN_MUX_5                                  (0xff634400 + (0x31 << 2))
#define SEC_PERIPHS_PIN_MUX_5                                  (0xff634400 + (0x31 << 2))
#define   P_PERIPHS_PIN_MUX_5                                  (volatile uint32_t *)(0xff634400 + (0x31 << 2))
#define     PERIPHS_PIN_MUX_6                                  (0xff634400 + (0x32 << 2))
#define SEC_PERIPHS_PIN_MUX_6                                  (0xff634400 + (0x32 << 2))
#define   P_PERIPHS_PIN_MUX_6                                  (volatile uint32_t *)(0xff634400 + (0x32 << 2))
#define     PERIPHS_PIN_MUX_7                                  (0xff634400 + (0x33 << 2))
#define SEC_PERIPHS_PIN_MUX_7                                  (0xff634400 + (0x33 << 2))
#define   P_PERIPHS_PIN_MUX_7                                  (volatile uint32_t *)(0xff634400 + (0x33 << 2))
#define     PERIPHS_PIN_MUX_8                                  (0xff634400 + (0x34 << 2))
#define SEC_PERIPHS_PIN_MUX_8                                  (0xff634400 + (0x34 << 2))
#define   P_PERIPHS_PIN_MUX_8                                  (volatile uint32_t *)(0xff634400 + (0x34 << 2))
#define     PERIPHS_PIN_MUX_9                                  (0xff634400 + (0x35 << 2))
#define SEC_PERIPHS_PIN_MUX_9                                  (0xff634400 + (0x35 << 2))
#define   P_PERIPHS_PIN_MUX_9                                  (volatile uint32_t *)(0xff634400 + (0x35 << 2))
#define     PERIPHS_PIN_MUX_10                                 (0xff634400 + (0x36 << 2))
#define SEC_PERIPHS_PIN_MUX_10                                 (0xff634400 + (0x36 << 2))
#define   P_PERIPHS_PIN_MUX_10                                 (volatile uint32_t *)(0xff634400 + (0x36 << 2))
#define     PERIPHS_PIN_MUX_11                                 (0xff634400 + (0x37 << 2))
#define SEC_PERIPHS_PIN_MUX_11                                 (0xff634400 + (0x37 << 2))
#define   P_PERIPHS_PIN_MUX_11                                 (volatile uint32_t *)(0xff634400 + (0x37 << 2))
#define     PERIPHS_PIN_MUX_12                                 (0xff634400 + (0x38 << 2))
#define SEC_PERIPHS_PIN_MUX_12                                 (0xff634400 + (0x38 << 2))
#define   P_PERIPHS_PIN_MUX_12                                 (volatile uint32_t *)(0xff634400 + (0x38 << 2))
// ----------------------------
// Pad conntrols
// ----------------------------
#define     PAD_PULL_UP_REG6                                   (0xff634400 + (0x39 << 2))
#define SEC_PAD_PULL_UP_REG6                                   (0xff634400 + (0x39 << 2))
#define   P_PAD_PULL_UP_REG6                                   (volatile uint32_t *)(0xff634400 + (0x39 << 2))
#define     PAD_PULL_UP_REG0                                   (0xff634400 + (0x3a << 2))
#define SEC_PAD_PULL_UP_REG0                                   (0xff634400 + (0x3a << 2))
#define   P_PAD_PULL_UP_REG0                                   (volatile uint32_t *)(0xff634400 + (0x3a << 2))
#define     PAD_PULL_UP_REG1                                   (0xff634400 + (0x3b << 2))
#define SEC_PAD_PULL_UP_REG1                                   (0xff634400 + (0x3b << 2))
#define   P_PAD_PULL_UP_REG1                                   (volatile uint32_t *)(0xff634400 + (0x3b << 2))
#define     PAD_PULL_UP_REG2                                   (0xff634400 + (0x3c << 2))
#define SEC_PAD_PULL_UP_REG2                                   (0xff634400 + (0x3c << 2))
#define   P_PAD_PULL_UP_REG2                                   (volatile uint32_t *)(0xff634400 + (0x3c << 2))
#define     PAD_PULL_UP_REG3                                   (0xff634400 + (0x3d << 2))
#define SEC_PAD_PULL_UP_REG3                                   (0xff634400 + (0x3d << 2))
#define   P_PAD_PULL_UP_REG3                                   (volatile uint32_t *)(0xff634400 + (0x3d << 2))
#define     PAD_PULL_UP_REG4                                   (0xff634400 + (0x3e << 2))
#define SEC_PAD_PULL_UP_REG4                                   (0xff634400 + (0x3e << 2))
#define   P_PAD_PULL_UP_REG4                                   (volatile uint32_t *)(0xff634400 + (0x3e << 2))
#define     PAD_PULL_UP_REG5                                   (0xff634400 + (0x3f << 2))
#define SEC_PAD_PULL_UP_REG5                                   (0xff634400 + (0x3f << 2))
#define   P_PAD_PULL_UP_REG5                                   (volatile uint32_t *)(0xff634400 + (0x3f << 2))
// ----------------------------
// Random (2)
// ----------------------------
#define     RAND64_ADDR0                                       (0xff634400 + (0x40 << 2))
#define SEC_RAND64_ADDR0                                       (0xff634400 + (0x40 << 2))
#define   P_RAND64_ADDR0                                       (volatile uint32_t *)(0xff634400 + (0x40 << 2))
#define     RAND64_ADDR1                                       (0xff634400 + (0x41 << 2))
#define SEC_RAND64_ADDR1                                       (0xff634400 + (0x41 << 2))
#define   P_RAND64_ADDR1                                       (volatile uint32_t *)(0xff634400 + (0x41 << 2))
// ---------------------------
// Ethernet (1)
// ----------------------------
#define     PREG_ETHERNET_ADDR0                                (0xff634400 + (0x42 << 2))
#define SEC_PREG_ETHERNET_ADDR0                                (0xff634400 + (0x42 << 2))
#define   P_PREG_ETHERNET_ADDR0                                (volatile uint32_t *)(0xff634400 + (0x42 << 2))
// ---------------------------
// AM_ANALOG_TOP
// ----------------------------
#define     PREG_AM_ANALOG_ADDR                                (0xff634400 + (0x43 << 2))
#define SEC_PREG_AM_ANALOG_ADDR                                (0xff634400 + (0x43 << 2))
#define   P_PREG_AM_ANALOG_ADDR                                (volatile uint32_t *)(0xff634400 + (0x43 << 2))
// ---------------------------
// Mali55 (1)
// ----------------------------
#define     PREG_MALI_BYTE_CNTL                                (0xff634400 + (0x44 << 2))
#define SEC_PREG_MALI_BYTE_CNTL                                (0xff634400 + (0x44 << 2))
#define   P_PREG_MALI_BYTE_CNTL                                (volatile uint32_t *)(0xff634400 + (0x44 << 2))
// ---------------------------
// WIFI (1)
// ----------------------------
#define     PREG_WIFI_CNTL                                     (0xff634400 + (0x45 << 2))
#define SEC_PREG_WIFI_CNTL                                     (0xff634400 + (0x45 << 2))
#define   P_PREG_WIFI_CNTL                                     (volatile uint32_t *)(0xff634400 + (0x45 << 2))
#define     PAD_PULL_UP_EN_REG0                                (0xff634400 + (0x48 << 2))
#define SEC_PAD_PULL_UP_EN_REG0                                (0xff634400 + (0x48 << 2))
#define   P_PAD_PULL_UP_EN_REG0                                (volatile uint32_t *)(0xff634400 + (0x48 << 2))
#define     PAD_PULL_UP_EN_REG1                                (0xff634400 + (0x49 << 2))
#define SEC_PAD_PULL_UP_EN_REG1                                (0xff634400 + (0x49 << 2))
#define   P_PAD_PULL_UP_EN_REG1                                (volatile uint32_t *)(0xff634400 + (0x49 << 2))
#define     PAD_PULL_UP_EN_REG2                                (0xff634400 + (0x4a << 2))
#define SEC_PAD_PULL_UP_EN_REG2                                (0xff634400 + (0x4a << 2))
#define   P_PAD_PULL_UP_EN_REG2                                (volatile uint32_t *)(0xff634400 + (0x4a << 2))
#define     PAD_PULL_UP_EN_REG3                                (0xff634400 + (0x4b << 2))
#define SEC_PAD_PULL_UP_EN_REG3                                (0xff634400 + (0x4b << 2))
#define   P_PAD_PULL_UP_EN_REG3                                (volatile uint32_t *)(0xff634400 + (0x4b << 2))
#define     PAD_PULL_UP_EN_REG4                                (0xff634400 + (0x4c << 2))
#define SEC_PAD_PULL_UP_EN_REG4                                (0xff634400 + (0x4c << 2))
#define   P_PAD_PULL_UP_EN_REG4                                (volatile uint32_t *)(0xff634400 + (0x4c << 2))
#define     PAD_PULL_UP_EN_REG5                                (0xff634400 + (0x4d << 2))
#define SEC_PAD_PULL_UP_EN_REG5                                (0xff634400 + (0x4d << 2))
#define   P_PAD_PULL_UP_EN_REG5                                (volatile uint32_t *)(0xff634400 + (0x4d << 2))
#define     PAD_PULL_UP_EN_REG6                                (0xff634400 + (0x4e << 2))
#define SEC_PAD_PULL_UP_EN_REG6                                (0xff634400 + (0x4e << 2))
#define   P_PAD_PULL_UP_EN_REG6                                (volatile uint32_t *)(0xff634400 + (0x4e << 2))
// ---------------------------
#define     PREG_ETH_REG0                                      (0xff634400 + (0x50 << 2))
#define SEC_PREG_ETH_REG0                                      (0xff634400 + (0x50 << 2))
#define   P_PREG_ETH_REG0                                      (volatile uint32_t *)(0xff634400 + (0x50 << 2))
#define     PREG_ETH_REG1                                      (0xff634400 + (0x51 << 2))
#define SEC_PREG_ETH_REG1                                      (0xff634400 + (0x51 << 2))
#define   P_PREG_ETH_REG1                                      (volatile uint32_t *)(0xff634400 + (0x51 << 2))
#define     PREG_NAND_CFG_KEY0                                 (0xff634400 + (0x52 << 2))
#define SEC_PREG_NAND_CFG_KEY0                                 (0xff634400 + (0x52 << 2))
#define   P_PREG_NAND_CFG_KEY0                                 (volatile uint32_t *)(0xff634400 + (0x52 << 2))
#define     PREG_NAND_CFG_KEY1                                 (0xff634400 + (0x53 << 2))
#define SEC_PREG_NAND_CFG_KEY1                                 (0xff634400 + (0x53 << 2))
#define   P_PREG_NAND_CFG_KEY1                                 (volatile uint32_t *)(0xff634400 + (0x53 << 2))
#define     PREG_VPU_SECURE0                                   (0xff634400 + (0x54 << 2))
#define SEC_PREG_VPU_SECURE0                                   (0xff634400 + (0x54 << 2))
#define   P_PREG_VPU_SECURE0                                   (volatile uint32_t *)(0xff634400 + (0x54 << 2))
#define     PREG_VPU_SECURE1                                   (0xff634400 + (0x55 << 2))
#define SEC_PREG_VPU_SECURE1                                   (0xff634400 + (0x55 << 2))
#define   P_PREG_VPU_SECURE1                                   (volatile uint32_t *)(0xff634400 + (0x55 << 2))
#define     PREG_ETH_REG2                                      (0xff634400 + (0x56 << 2))
#define SEC_PREG_ETH_REG2                                      (0xff634400 + (0x56 << 2))
#define   P_PREG_ETH_REG2                                      (volatile uint32_t *)(0xff634400 + (0x56 << 2))
#define     PREG_ETH_REG3                                      (0xff634400 + (0x57 << 2))
#define SEC_PREG_ETH_REG3                                      (0xff634400 + (0x57 << 2))
#define   P_PREG_ETH_REG3                                      (volatile uint32_t *)(0xff634400 + (0x57 << 2))
#define     PREG_ETH_REG4                                      (0xff634400 + (0x58 << 2))
#define SEC_PREG_ETH_REG4                                      (0xff634400 + (0x58 << 2))
#define   P_PREG_ETH_REG4                                      (volatile uint32_t *)(0xff634400 + (0x58 << 2))
// ---------------------------
// Generic production test
// ----------------------------
#define     PROD_TEST_REG0                                     (0xff634400 + (0x60 << 2))
#define SEC_PROD_TEST_REG0                                     (0xff634400 + (0x60 << 2))
#define   P_PROD_TEST_REG0                                     (volatile uint32_t *)(0xff634400 + (0x60 << 2))
#define     PROD_TEST_REG1                                     (0xff634400 + (0x61 << 2))
#define SEC_PROD_TEST_REG1                                     (0xff634400 + (0x61 << 2))
#define   P_PROD_TEST_REG1                                     (volatile uint32_t *)(0xff634400 + (0x61 << 2))
#define     PROD_TEST_REG2                                     (0xff634400 + (0x62 << 2))
#define SEC_PROD_TEST_REG2                                     (0xff634400 + (0x62 << 2))
#define   P_PROD_TEST_REG2                                     (volatile uint32_t *)(0xff634400 + (0x62 << 2))
#define     PROD_TEST_REG3                                     (0xff634400 + (0x63 << 2))
#define SEC_PROD_TEST_REG3                                     (0xff634400 + (0x63 << 2))
#define   P_PROD_TEST_REG3                                     (volatile uint32_t *)(0xff634400 + (0x63 << 2))
// ---------------------------
// am_analog_top
// ----------------------------
//`define METAL_REVISION                      8'h6a
#define     ADC_TOP_MISC                                       (0xff634400 + (0x6b << 2))
#define SEC_ADC_TOP_MISC                                       (0xff634400 + (0x6b << 2))
#define   P_ADC_TOP_MISC                                       (volatile uint32_t *)(0xff634400 + (0x6b << 2))
#define     DPLL_TOP_MISC                                      (0xff634400 + (0x6c << 2))
#define SEC_DPLL_TOP_MISC                                      (0xff634400 + (0x6c << 2))
#define   P_DPLL_TOP_MISC                                      (volatile uint32_t *)(0xff634400 + (0x6c << 2))
#define     ANALOG_TOP_MISC                                    (0xff634400 + (0x6d << 2))
#define SEC_ANALOG_TOP_MISC                                    (0xff634400 + (0x6d << 2))
#define   P_ANALOG_TOP_MISC                                    (volatile uint32_t *)(0xff634400 + (0x6d << 2))
#define     AM_ANALOG_TOP_REG0                                 (0xff634400 + (0x6e << 2))
#define SEC_AM_ANALOG_TOP_REG0                                 (0xff634400 + (0x6e << 2))
#define   P_AM_ANALOG_TOP_REG0                                 (volatile uint32_t *)(0xff634400 + (0x6e << 2))
#define     AM_ANALOG_TOP_REG1                                 (0xff634400 + (0x6f << 2))
#define SEC_AM_ANALOG_TOP_REG1                                 (0xff634400 + (0x6f << 2))
#define   P_AM_ANALOG_TOP_REG1                                 (volatile uint32_t *)(0xff634400 + (0x6f << 2))
// ---------------------------
// Sticky regs
// ----------------------------
#define     PREG_STICKY_REG0                                   (0xff634400 + (0x70 << 2))
#define SEC_PREG_STICKY_REG0                                   (0xff634400 + (0x70 << 2))
#define   P_PREG_STICKY_REG0                                   (volatile uint32_t *)(0xff634400 + (0x70 << 2))
#define     PREG_STICKY_REG1                                   (0xff634400 + (0x71 << 2))
#define SEC_PREG_STICKY_REG1                                   (0xff634400 + (0x71 << 2))
#define   P_PREG_STICKY_REG1                                   (volatile uint32_t *)(0xff634400 + (0x71 << 2))
#define     PREG_STICKY_REG2                                   (0xff634400 + (0x72 << 2))
#define SEC_PREG_STICKY_REG2                                   (0xff634400 + (0x72 << 2))
#define   P_PREG_STICKY_REG2                                   (volatile uint32_t *)(0xff634400 + (0x72 << 2))
#define     PREG_STICKY_REG3                                   (0xff634400 + (0x73 << 2))
#define SEC_PREG_STICKY_REG3                                   (0xff634400 + (0x73 << 2))
#define   P_PREG_STICKY_REG3                                   (volatile uint32_t *)(0xff634400 + (0x73 << 2))
#define     PREG_STICKY_REG4                                   (0xff634400 + (0x74 << 2))
#define SEC_PREG_STICKY_REG4                                   (0xff634400 + (0x74 << 2))
#define   P_PREG_STICKY_REG4                                   (volatile uint32_t *)(0xff634400 + (0x74 << 2))
#define     PREG_STICKY_REG5                                   (0xff634400 + (0x75 << 2))
#define SEC_PREG_STICKY_REG5                                   (0xff634400 + (0x75 << 2))
#define   P_PREG_STICKY_REG5                                   (volatile uint32_t *)(0xff634400 + (0x75 << 2))
#define     PREG_STICKY_REG6                                   (0xff634400 + (0x76 << 2))
#define SEC_PREG_STICKY_REG6                                   (0xff634400 + (0x76 << 2))
#define   P_PREG_STICKY_REG6                                   (volatile uint32_t *)(0xff634400 + (0x76 << 2))
#define     PREG_STICKY_REG7                                   (0xff634400 + (0x77 << 2))
#define SEC_PREG_STICKY_REG7                                   (0xff634400 + (0x77 << 2))
#define   P_PREG_STICKY_REG7                                   (volatile uint32_t *)(0xff634400 + (0x77 << 2))
#define     PREG_STICKY_REG8                                   (0xff634400 + (0x78 << 2))
#define SEC_PREG_STICKY_REG8                                   (0xff634400 + (0x78 << 2))
#define   P_PREG_STICKY_REG8                                   (volatile uint32_t *)(0xff634400 + (0x78 << 2))
#define     PREG_STICKY_REG9                                   (0xff634400 + (0x79 << 2))
#define SEC_PREG_STICKY_REG9                                   (0xff634400 + (0x79 << 2))
#define   P_PREG_STICKY_REG9                                   (volatile uint32_t *)(0xff634400 + (0x79 << 2))
#define     PREG_WRITE_ONCE_REG                                (0xff634400 + (0x7e << 2))
#define SEC_PREG_WRITE_ONCE_REG                                (0xff634400 + (0x7e << 2))
#define   P_PREG_WRITE_ONCE_REG                                (volatile uint32_t *)(0xff634400 + (0x7e << 2))
// ---------------------------
// AM Ring Oscillator
// ----------------------------
#define     AM_RING_OSC_REG0                                   (0xff634400 + (0x7f << 2))
#define SEC_AM_RING_OSC_REG0                                   (0xff634400 + (0x7f << 2))
#define   P_AM_RING_OSC_REG0                                   (volatile uint32_t *)(0xff634400 + (0x7f << 2))
// Control whether to provide random number to HDMITX20
#define     HDMITX20_RNDNUM                                    (0xff634400 + (0x80 << 2))
#define SEC_HDMITX20_RNDNUM                                    (0xff634400 + (0x80 << 2))
#define   P_HDMITX20_RNDNUM                                    (volatile uint32_t *)(0xff634400 + (0x80 << 2))
// ---------------------------
// Bus Monitoring
// ----------------------------
#define     BUS_MONITOR_CNTL                                   (0xff634400 + (0x81 << 2))
#define SEC_BUS_MONITOR_CNTL                                   (0xff634400 + (0x81 << 2))
#define   P_BUS_MONITOR_CNTL                                   (volatile uint32_t *)(0xff634400 + (0x81 << 2))
#define     BUS_MON0_ADDR                                      (0xff634400 + (0x82 << 2))
#define SEC_BUS_MON0_ADDR                                      (0xff634400 + (0x82 << 2))
#define   P_BUS_MON0_ADDR                                      (volatile uint32_t *)(0xff634400 + (0x82 << 2))
#define     BUS_MON0_DATA                                      (0xff634400 + (0x83 << 2))
#define SEC_BUS_MON0_DATA                                      (0xff634400 + (0x83 << 2))
#define   P_BUS_MON0_DATA                                      (volatile uint32_t *)(0xff634400 + (0x83 << 2))
#define     BUS_MON0_DATA_MSK                                  (0xff634400 + (0x84 << 2))
#define SEC_BUS_MON0_DATA_MSK                                  (0xff634400 + (0x84 << 2))
#define   P_BUS_MON0_DATA_MSK                                  (volatile uint32_t *)(0xff634400 + (0x84 << 2))
#define     BUS_MON1_ADDR                                      (0xff634400 + (0x85 << 2))
#define SEC_BUS_MON1_ADDR                                      (0xff634400 + (0x85 << 2))
#define   P_BUS_MON1_ADDR                                      (volatile uint32_t *)(0xff634400 + (0x85 << 2))
#define     BUS_MON1_DATA                                      (0xff634400 + (0x86 << 2))
#define SEC_BUS_MON1_DATA                                      (0xff634400 + (0x86 << 2))
#define   P_BUS_MON1_DATA                                      (volatile uint32_t *)(0xff634400 + (0x86 << 2))
#define     BUS_MON1_DATA_MSK                                  (0xff634400 + (0x87 << 2))
#define SEC_BUS_MON1_DATA_MSK                                  (0xff634400 + (0x87 << 2))
#define   P_BUS_MON1_DATA_MSK                                  (volatile uint32_t *)(0xff634400 + (0x87 << 2))
#define     ASYNC_FIFO_LOCK_ADR                                (0xff634400 + (0x88 << 2))
#define SEC_ASYNC_FIFO_LOCK_ADR                                (0xff634400 + (0x88 << 2))
#define   P_ASYNC_FIFO_LOCK_ADR                                (volatile uint32_t *)(0xff634400 + (0x88 << 2))
#define     SECE_TIMER_CTRL                                    (0xff634400 + (0x89 << 2))
#define SEC_SECE_TIMER_CTRL                                    (0xff634400 + (0x89 << 2))
#define   P_SECE_TIMER_CTRL                                    (volatile uint32_t *)(0xff634400 + (0x89 << 2))
#define     SECE_TIMER_LOW                                     (0xff634400 + (0x8a << 2))
#define SEC_SECE_TIMER_LOW                                     (0xff634400 + (0x8a << 2))
#define   P_SECE_TIMER_LOW                                     (volatile uint32_t *)(0xff634400 + (0x8a << 2))
#define     SECE_TIMER_HIG                                     (0xff634400 + (0x8b << 2))
#define SEC_SECE_TIMER_HIG                                     (0xff634400 + (0x8b << 2))
#define   P_SECE_TIMER_HIG                                     (volatile uint32_t *)(0xff634400 + (0x8b << 2))
// ---------------------------
// System CPU control registers
// ----------------------------
#define     SYS_CPU_POR_CFG0                                   (0xff634400 + (0x90 << 2))
#define SEC_SYS_CPU_POR_CFG0                                   (0xff634400 + (0x90 << 2))
#define   P_SYS_CPU_POR_CFG0                                   (volatile uint32_t *)(0xff634400 + (0x90 << 2))
#define     SYS_CPU_POR_CFG1                                   (0xff634400 + (0x91 << 2))
#define SEC_SYS_CPU_POR_CFG1                                   (0xff634400 + (0x91 << 2))
#define   P_SYS_CPU_POR_CFG1                                   (volatile uint32_t *)(0xff634400 + (0x91 << 2))
#define     SYS_CPU_CFG0                                       (0xff634400 + (0x92 << 2))
#define SEC_SYS_CPU_CFG0                                       (0xff634400 + (0x92 << 2))
#define   P_SYS_CPU_CFG0                                       (volatile uint32_t *)(0xff634400 + (0x92 << 2))
#define     SYS_CPU_CFG1                                       (0xff634400 + (0x93 << 2))
#define SEC_SYS_CPU_CFG1                                       (0xff634400 + (0x93 << 2))
#define   P_SYS_CPU_CFG1                                       (volatile uint32_t *)(0xff634400 + (0x93 << 2))
#define     SYS_CPU_CFG2                                       (0xff634400 + (0x94 << 2))
#define SEC_SYS_CPU_CFG2                                       (0xff634400 + (0x94 << 2))
#define   P_SYS_CPU_CFG2                                       (volatile uint32_t *)(0xff634400 + (0x94 << 2))
#define     SYS_CPU_CFG3                                       (0xff634400 + (0x95 << 2))
#define SEC_SYS_CPU_CFG3                                       (0xff634400 + (0x95 << 2))
#define   P_SYS_CPU_CFG3                                       (volatile uint32_t *)(0xff634400 + (0x95 << 2))
#define     SYS_CPU_CFG4                                       (0xff634400 + (0x96 << 2))
#define SEC_SYS_CPU_CFG4                                       (0xff634400 + (0x96 << 2))
#define   P_SYS_CPU_CFG4                                       (volatile uint32_t *)(0xff634400 + (0x96 << 2))
#define     SYS_CPU_CFG5                                       (0xff634400 + (0x97 << 2))
#define SEC_SYS_CPU_CFG5                                       (0xff634400 + (0x97 << 2))
#define   P_SYS_CPU_CFG5                                       (volatile uint32_t *)(0xff634400 + (0x97 << 2))
#define     SYS_CPU_CFG6                                       (0xff634400 + (0x98 << 2))
#define SEC_SYS_CPU_CFG6                                       (0xff634400 + (0x98 << 2))
#define   P_SYS_CPU_CFG6                                       (volatile uint32_t *)(0xff634400 + (0x98 << 2))
#define     SYS_CPU_CFG7                                       (0xff634400 + (0x99 << 2))
#define SEC_SYS_CPU_CFG7                                       (0xff634400 + (0x99 << 2))
#define   P_SYS_CPU_CFG7                                       (volatile uint32_t *)(0xff634400 + (0x99 << 2))
#define     SYS_CPU_CFG8                                       (0xff634400 + (0x9a << 2))
#define SEC_SYS_CPU_CFG8                                       (0xff634400 + (0x9a << 2))
#define   P_SYS_CPU_CFG8                                       (volatile uint32_t *)(0xff634400 + (0x9a << 2))
#define     SYS_CPU_CFG9                                       (0xff634400 + (0x9b << 2))
#define SEC_SYS_CPU_CFG9                                       (0xff634400 + (0x9b << 2))
#define   P_SYS_CPU_CFG9                                       (volatile uint32_t *)(0xff634400 + (0x9b << 2))
#define     SYS_CPU_CFG10                                      (0xff634400 + (0x9c << 2))
#define SEC_SYS_CPU_CFG10                                      (0xff634400 + (0x9c << 2))
#define   P_SYS_CPU_CFG10                                      (volatile uint32_t *)(0xff634400 + (0x9c << 2))
#define     SYS_CPU_CFG11                                      (0xff634400 + (0x9d << 2))
#define SEC_SYS_CPU_CFG11                                      (0xff634400 + (0x9d << 2))
#define   P_SYS_CPU_CFG11                                      (volatile uint32_t *)(0xff634400 + (0x9d << 2))
#define     SYS_CPU_CFG12                                      (0xff634400 + (0x9e << 2))
#define SEC_SYS_CPU_CFG12                                      (0xff634400 + (0x9e << 2))
#define   P_SYS_CPU_CFG12                                      (volatile uint32_t *)(0xff634400 + (0x9e << 2))
#define     SYS_CPU_CFG13                                      (0xff634400 + (0x9f << 2))
#define SEC_SYS_CPU_CFG13                                      (0xff634400 + (0x9f << 2))
#define   P_SYS_CPU_CFG13                                      (volatile uint32_t *)(0xff634400 + (0x9f << 2))
#define     SYS_CPU_STATUS0                                    (0xff634400 + (0xa0 << 2))
#define SEC_SYS_CPU_STATUS0                                    (0xff634400 + (0xa0 << 2))
#define   P_SYS_CPU_STATUS0                                    (volatile uint32_t *)(0xff634400 + (0xa0 << 2))
#define     SYS_CPU_STATUS1                                    (0xff634400 + (0xa1 << 2))
#define SEC_SYS_CPU_STATUS1                                    (0xff634400 + (0xa1 << 2))
#define   P_SYS_CPU_STATUS1                                    (volatile uint32_t *)(0xff634400 + (0xa1 << 2))
#define     SYS_CPU_STATUS2                                    (0xff634400 + (0xa2 << 2))
#define SEC_SYS_CPU_STATUS2                                    (0xff634400 + (0xa2 << 2))
#define   P_SYS_CPU_STATUS2                                    (volatile uint32_t *)(0xff634400 + (0xa2 << 2))
#define     SYS_CPU_STATUS3                                    (0xff634400 + (0xa3 << 2))
#define SEC_SYS_CPU_STATUS3                                    (0xff634400 + (0xa3 << 2))
#define   P_SYS_CPU_STATUS3                                    (volatile uint32_t *)(0xff634400 + (0xa3 << 2))
#define     SYS_CPU_STATUS4                                    (0xff634400 + (0xa4 << 2))
#define SEC_SYS_CPU_STATUS4                                    (0xff634400 + (0xa4 << 2))
#define   P_SYS_CPU_STATUS4                                    (volatile uint32_t *)(0xff634400 + (0xa4 << 2))
#define     SYS_CPU_STATUS5                                    (0xff634400 + (0xa5 << 2))
#define SEC_SYS_CPU_STATUS5                                    (0xff634400 + (0xa5 << 2))
#define   P_SYS_CPU_STATUS5                                    (volatile uint32_t *)(0xff634400 + (0xa5 << 2))
#define     SYS_CPU_MISC                                       (0xff634400 + (0xa8 << 2))
#define SEC_SYS_CPU_MISC                                       (0xff634400 + (0xa8 << 2))
#define   P_SYS_CPU_MISC                                       (volatile uint32_t *)(0xff634400 + (0xa8 << 2))
//========================================================================
//  HIU - Registers
//========================================================================
// APB4_DECODER_NON_SECURE_BASE     32'hFF63C000
// APB4_DECODER_SECURE_BASE         32'hFF63C000
#define     SCR_HIU                                            (0xff63c000 + (0x0b << 2))
#define SEC_SCR_HIU                                            (0xff63c000 + (0x0b << 2))
#define   P_SCR_HIU                                            (volatile uint32_t *)(0xff63c000 + (0x0b << 2))
#define     HPG_TIMER                                          (0xff63c000 + (0x0f << 2))
#define SEC_HPG_TIMER                                          (0xff63c000 + (0x0f << 2))
#define   P_HPG_TIMER                                          (volatile uint32_t *)(0xff63c000 + (0x0f << 2))
#define     HHI_GP0_PLL_CNTL                                   (0xff63c000 + (0x10 << 2))
#define SEC_HHI_GP0_PLL_CNTL                                   (0xff63c000 + (0x10 << 2))
#define   P_HHI_GP0_PLL_CNTL                                   (volatile uint32_t *)(0xff63c000 + (0x10 << 2))
#define     HHI_GP0_PLL_CNTL2                                  (0xff63c000 + (0x11 << 2))
#define SEC_HHI_GP0_PLL_CNTL2                                  (0xff63c000 + (0x11 << 2))
#define   P_HHI_GP0_PLL_CNTL2                                  (volatile uint32_t *)(0xff63c000 + (0x11 << 2))
#define     HHI_GP0_PLL_CNTL3                                  (0xff63c000 + (0x12 << 2))
#define SEC_HHI_GP0_PLL_CNTL3                                  (0xff63c000 + (0x12 << 2))
#define   P_HHI_GP0_PLL_CNTL3                                  (volatile uint32_t *)(0xff63c000 + (0x12 << 2))
#define     HHI_GP0_PLL_CNTL4                                  (0xff63c000 + (0x13 << 2))
#define SEC_HHI_GP0_PLL_CNTL4                                  (0xff63c000 + (0x13 << 2))
#define   P_HHI_GP0_PLL_CNTL4                                  (volatile uint32_t *)(0xff63c000 + (0x13 << 2))
#define     HHI_GP0_PLL_CNTL5                                  (0xff63c000 + (0x14 << 2))
#define SEC_HHI_GP0_PLL_CNTL5                                  (0xff63c000 + (0x14 << 2))
#define   P_HHI_GP0_PLL_CNTL5                                  (volatile uint32_t *)(0xff63c000 + (0x14 << 2))
#define     HHI_GP0_PLL_STS                                    (0xff63c000 + (0x15 << 2))
#define SEC_HHI_GP0_PLL_STS                                    (0xff63c000 + (0x15 << 2))
#define   P_HHI_GP0_PLL_STS                                    (volatile uint32_t *)(0xff63c000 + (0x15 << 2))
#define     HHI_GP0_PLL_CNTL1                                  (0xff63c000 + (0x16 << 2))
#define SEC_HHI_GP0_PLL_CNTL1                                  (0xff63c000 + (0x16 << 2))
#define   P_HHI_GP0_PLL_CNTL1                                  (volatile uint32_t *)(0xff63c000 + (0x16 << 2))
#define     HHI_GP1_PLL_CNTL                                   (0xff63c000 + (0x18 << 2))
#define SEC_HHI_GP1_PLL_CNTL                                   (0xff63c000 + (0x18 << 2))
#define   P_HHI_GP1_PLL_CNTL                                   (volatile uint32_t *)(0xff63c000 + (0x18 << 2))
#define     HHI_GP1_PLL_CNTL2                                  (0xff63c000 + (0x19 << 2))
#define SEC_HHI_GP1_PLL_CNTL2                                  (0xff63c000 + (0x19 << 2))
#define   P_HHI_GP1_PLL_CNTL2                                  (volatile uint32_t *)(0xff63c000 + (0x19 << 2))
#define     HHI_GP1_PLL_CNTL3                                  (0xff63c000 + (0x1a << 2))
#define SEC_HHI_GP1_PLL_CNTL3                                  (0xff63c000 + (0x1a << 2))
#define   P_HHI_GP1_PLL_CNTL3                                  (volatile uint32_t *)(0xff63c000 + (0x1a << 2))
#define     HHI_GP1_PLL_CNTL4                                  (0xff63c000 + (0x1b << 2))
#define SEC_HHI_GP1_PLL_CNTL4                                  (0xff63c000 + (0x1b << 2))
#define   P_HHI_GP1_PLL_CNTL4                                  (volatile uint32_t *)(0xff63c000 + (0x1b << 2))
#define     HHI_GP1_PLL_CNTL5                                  (0xff63c000 + (0x1c << 2))
#define SEC_HHI_GP1_PLL_CNTL5                                  (0xff63c000 + (0x1c << 2))
#define   P_HHI_GP1_PLL_CNTL5                                  (volatile uint32_t *)(0xff63c000 + (0x1c << 2))
#define     HHI_GP1_PLL_STS                                    (0xff63c000 + (0x1d << 2))
#define SEC_HHI_GP1_PLL_STS                                    (0xff63c000 + (0x1d << 2))
#define   P_HHI_GP1_PLL_STS                                    (volatile uint32_t *)(0xff63c000 + (0x1d << 2))
#define     HHI_GP1_PLL_CNTL1                                  (0xff63c000 + (0x1e << 2))
#define SEC_HHI_GP1_PLL_CNTL1                                  (0xff63c000 + (0x1e << 2))
#define   P_HHI_GP1_PLL_CNTL1                                  (volatile uint32_t *)(0xff63c000 + (0x1e << 2))
#define     HHI_CADC_CNTL                                      (0xff63c000 + (0x20 << 2))
#define SEC_HHI_CADC_CNTL                                      (0xff63c000 + (0x20 << 2))
#define   P_HHI_CADC_CNTL                                      (volatile uint32_t *)(0xff63c000 + (0x20 << 2))
#define     HHI_CADC_CNTL2                                     (0xff63c000 + (0x21 << 2))
#define SEC_HHI_CADC_CNTL2                                     (0xff63c000 + (0x21 << 2))
#define   P_HHI_CADC_CNTL2                                     (volatile uint32_t *)(0xff63c000 + (0x21 << 2))
#define     HHI_CADC_CNTL3                                     (0xff63c000 + (0x22 << 2))
#define SEC_HHI_CADC_CNTL3                                     (0xff63c000 + (0x22 << 2))
#define   P_HHI_CADC_CNTL3                                     (volatile uint32_t *)(0xff63c000 + (0x22 << 2))
#define     HHI_CADC_CNTL4                                     (0xff63c000 + (0x23 << 2))
#define SEC_HHI_CADC_CNTL4                                     (0xff63c000 + (0x23 << 2))
#define   P_HHI_CADC_CNTL4                                     (volatile uint32_t *)(0xff63c000 + (0x23 << 2))
#define     HHI_CADC_CNTL5                                     (0xff63c000 + (0x24 << 2))
#define SEC_HHI_CADC_CNTL5                                     (0xff63c000 + (0x24 << 2))
#define   P_HHI_CADC_CNTL5                                     (volatile uint32_t *)(0xff63c000 + (0x24 << 2))
#define     HHI_CADC_CNTL6                                     (0xff63c000 + (0x25 << 2))
#define SEC_HHI_CADC_CNTL6                                     (0xff63c000 + (0x25 << 2))
#define   P_HHI_CADC_CNTL6                                     (volatile uint32_t *)(0xff63c000 + (0x25 << 2))
#define     HHI_DADC_CNTL                                      (0xff63c000 + (0x27 << 2))
#define SEC_HHI_DADC_CNTL                                      (0xff63c000 + (0x27 << 2))
#define   P_HHI_DADC_CNTL                                      (volatile uint32_t *)(0xff63c000 + (0x27 << 2))
#define     HHI_DADC_CNTL2                                     (0xff63c000 + (0x28 << 2))
#define SEC_HHI_DADC_CNTL2                                     (0xff63c000 + (0x28 << 2))
#define   P_HHI_DADC_CNTL2                                     (volatile uint32_t *)(0xff63c000 + (0x28 << 2))
#define     HHI_DADC_RDBK0_I                                   (0xff63c000 + (0x29 << 2))
#define SEC_HHI_DADC_RDBK0_I                                   (0xff63c000 + (0x29 << 2))
#define   P_HHI_DADC_RDBK0_I                                   (volatile uint32_t *)(0xff63c000 + (0x29 << 2))
#define     HHI_DADC_CNTL3                                     (0xff63c000 + (0x2a << 2))
#define SEC_HHI_DADC_CNTL3                                     (0xff63c000 + (0x2a << 2))
#define   P_HHI_DADC_CNTL3                                     (volatile uint32_t *)(0xff63c000 + (0x2a << 2))
#define     HHI_DADC_CNTL4                                     (0xff63c000 + (0x2b << 2))
#define SEC_HHI_DADC_CNTL4                                     (0xff63c000 + (0x2b << 2))
#define   P_HHI_DADC_CNTL4                                     (volatile uint32_t *)(0xff63c000 + (0x2b << 2))
#define     HHI_AFE_TUNNING_CNTL                               (0xff63c000 + (0x2c << 2))
#define SEC_HHI_AFE_TUNNING_CNTL                               (0xff63c000 + (0x2c << 2))
#define   P_HHI_AFE_TUNNING_CNTL                               (volatile uint32_t *)(0xff63c000 + (0x2c << 2))
#define     HHI_AFE_TUNNING_CNTL_I                             (0xff63c000 + (0x2d << 2))
#define SEC_HHI_AFE_TUNNING_CNTL_I                             (0xff63c000 + (0x2d << 2))
#define   P_HHI_AFE_TUNNING_CNTL_I                             (volatile uint32_t *)(0xff63c000 + (0x2d << 2))
#define     HHI_CVBS_DETECT_CNTL                               (0xff63c000 + (0x2e << 2))
#define SEC_HHI_CVBS_DETECT_CNTL                               (0xff63c000 + (0x2e << 2))
#define   P_HHI_CVBS_DETECT_CNTL                               (volatile uint32_t *)(0xff63c000 + (0x2e << 2))
#define     HHI_XTAL_DIVN_CNTL                                 (0xff63c000 + (0x2f << 2))
#define SEC_HHI_XTAL_DIVN_CNTL                                 (0xff63c000 + (0x2f << 2))
#define   P_HHI_XTAL_DIVN_CNTL                                 (volatile uint32_t *)(0xff63c000 + (0x2f << 2))
#define     HHI_GCLK2_MPEG0                                    (0xff63c000 + (0x30 << 2))
#define SEC_HHI_GCLK2_MPEG0                                    (0xff63c000 + (0x30 << 2))
#define   P_HHI_GCLK2_MPEG0                                    (volatile uint32_t *)(0xff63c000 + (0x30 << 2))
#define     HHI_GCLK2_MPEG1                                    (0xff63c000 + (0x31 << 2))
#define SEC_HHI_GCLK2_MPEG1                                    (0xff63c000 + (0x31 << 2))
#define   P_HHI_GCLK2_MPEG1                                    (volatile uint32_t *)(0xff63c000 + (0x31 << 2))
#define     HHI_GCLK2_MPEG2                                    (0xff63c000 + (0x32 << 2))
#define SEC_HHI_GCLK2_MPEG2                                    (0xff63c000 + (0x32 << 2))
#define   P_HHI_GCLK2_MPEG2                                    (volatile uint32_t *)(0xff63c000 + (0x32 << 2))
#define     HHI_GCLK2_OTHER                                    (0xff63c000 + (0x34 << 2))
#define SEC_HHI_GCLK2_OTHER                                    (0xff63c000 + (0x34 << 2))
#define   P_HHI_GCLK2_OTHER                                    (volatile uint32_t *)(0xff63c000 + (0x34 << 2))
#define     HHI_GCLK2_AO                                       (0xff63c000 + (0x35 << 2))
#define SEC_HHI_GCLK2_AO                                       (0xff63c000 + (0x35 << 2))
#define   P_HHI_GCLK2_AO                                       (volatile uint32_t *)(0xff63c000 + (0x35 << 2))
#define     HHI_TIMER90K                                       (0xff63c000 + (0x3b << 2))
#define SEC_HHI_TIMER90K                                       (0xff63c000 + (0x3b << 2))
#define   P_HHI_TIMER90K                                       (volatile uint32_t *)(0xff63c000 + (0x3b << 2))
#define     HHI_MEM_PD_REG0                                    (0xff63c000 + (0x40 << 2))
#define SEC_HHI_MEM_PD_REG0                                    (0xff63c000 + (0x40 << 2))
#define   P_HHI_MEM_PD_REG0                                    (volatile uint32_t *)(0xff63c000 + (0x40 << 2))
//VIU1
//bit 29:28 mem_pd_vi_sharp,  2'b00: Sharpness line buffer memory power on, 2'b11: power down
//bit 29:28 mem_pd_vi_dipost, 2'b00: Deinterlace - di_post memory power on, 2'b11: power down
//bit 27:26 mem_pd_vi_dipre,  2'b00: Deinterlace - di_pre memory power on, 2'b11: power down
//bit 25:24 mem_pd_vi_prot3,  2'b00: picture rotation3 memory power on, 2'b11: power down
//bit 23:22 mem_pd_vi_prot2,  2'b00: picture rotation2 memory power on, 2'b11: power down
//bit 21:20 mem_pd_vi_prot1,  2'b00: picture rotation1 memory power on, 2'b11: power down
//bit 19:18 mem_pd_vi_vdin1,  2'b00: vdin1 memory power on, 2'b11: power down
//bit 17:16 mem_pd_vi_vdin0,  2'b00: vdin0 memory power on, 2'b11: power down
//bit 15:14 mem_pd_vi_osd_sc, 2'b00: osd_scaler memory power on, 2'b11: power down
//bit 13:12 mem_pd_vi_scale,  2'b00: scaler memory power on, 2'b11: power down
//bit 11:10 mem_pd_vi_ofifo,  2'b00: vpp output fifo memory power on, 2'b11: power down
//bit 9:8   mem_pd_vi_chroma, 2'b00: color management module memory power on, 2'b11: power down
//bit 7:6   mem_pd_vi_vd2,    2'b00: vd2 memory power on, 2'b11: power down
//bit 5:4   mem_pd_vi_vd1,    2'b00: vd1 memory power on, 2'b11: power down
//bit 3:2   mem_pd_vi_osd2,   2'b00: osd2 memory power on, 2'b11: power down
//bit 1:0   mem_pd_vi_osd1,   2'b00: osd1 memory power on, 2'b11: power down
#define     HHI_VPU_MEM_PD_REG0                                (0xff63c000 + (0x41 << 2))
#define SEC_HHI_VPU_MEM_PD_REG0                                (0xff63c000 + (0x41 << 2))
#define   P_HHI_VPU_MEM_PD_REG0                                (volatile uint32_t *)(0xff63c000 + (0x41 << 2))
//bit 29:28 mem_pd_atv_dmd,   2'b00: ATV DMD memory power on, 2'b11: power down
//bit 29:28 mem_pd_cvd2,      2'b00: CVD2 memory power on, 2'b11: power down
//bit 27:26 mem_pd_isp,       2'b00: ISP memory power on, 2'b11: power down
//bit 25:24 mem_pd_venci_int, 2'b00: cvbs- enci interface memory power on, 2'b11: power down
//bit 23:22 mem_pd_venc_l_top,2'b00: panel - encl top memory power on, 2'b11: power down
//bit 21:20 mem_pd_vencp_int, 2'b00: hdmi - encp interface memory power on, 2'b11: power down
//bit 13:12 mem_pd_vi2_osd_sc,2'b00: viu2 OSD scaler memory power on, 2'b11: power down
//bit 11:10 mem_pd_vi2_scale, 2'b00: viu2 scaler memory power on, 2'b11: power down
//bit 9:8   mem_pd_vi2_ofifo, 2'b00: viu2 vpp output fifo memory power on, 2'b11: power down
//bit 7:6   mem_pd_vi2_chroma,2'b00: viu2 color management module memory power on, 2'b11: power down
//bit 5:4   mem_pd_vi2_vd1,   2'b00: viu2 vd1 memory power on, 2'b11: power down
//bit 3:2   mem_pd_vi2_osd2,  2'b00: viu2 osd2 memory power on, 2'b11: power down
//bit 1:0   mem_pd_vi2_osd1,  2'b00: viu2 osd1 memory power on, 2'b11: power down
#define     HHI_VPU_MEM_PD_REG1                                (0xff63c000 + (0x42 << 2))
#define SEC_HHI_VPU_MEM_PD_REG1                                (0xff63c000 + (0x42 << 2))
#define   P_HHI_VPU_MEM_PD_REG1                                (volatile uint32_t *)(0xff63c000 + (0x42 << 2))
#define     HHI_DEMOD_MEM_PD_REG                               (0xff63c000 + (0x43 << 2))
#define SEC_HHI_DEMOD_MEM_PD_REG                               (0xff63c000 + (0x43 << 2))
#define   P_HHI_DEMOD_MEM_PD_REG                               (volatile uint32_t *)(0xff63c000 + (0x43 << 2))
#define     HHI_AUD_DAC_CTRL                                   (0xff63c000 + (0x44 << 2))
#define SEC_HHI_AUD_DAC_CTRL                                   (0xff63c000 + (0x44 << 2))
#define   P_HHI_AUD_DAC_CTRL                                   (volatile uint32_t *)(0xff63c000 + (0x44 << 2))
// `define HHI_VIID_PLL_CNTL4      8'h46 // video PLL read back
// `define HHI_VIID_PLL_CNTL       8'h47 // Video PLL control, word 1
// `define HHI_VIID_PLL_CNTL2      8'h48 // Video PLL control, word 2
// `define HHI_VIID_PLL_CNTL3      8'h49 // Video PLL control, word 3
#define     HHI_VIID_CLK_DIV                                   (0xff63c000 + (0x4a << 2))
#define SEC_HHI_VIID_CLK_DIV                                   (0xff63c000 + (0x4a << 2))
#define   P_HHI_VIID_CLK_DIV                                   (volatile uint32_t *)(0xff63c000 + (0x4a << 2))
#define     HHI_VIID_CLK_CNTL                                  (0xff63c000 + (0x4b << 2))
#define SEC_HHI_VIID_CLK_CNTL                                  (0xff63c000 + (0x4b << 2))
#define   P_HHI_VIID_CLK_CNTL                                  (volatile uint32_t *)(0xff63c000 + (0x4b << 2))
#define     HHI_VIID_DIVIDER_CNTL                              (0xff63c000 + (0x4c << 2))
#define SEC_HHI_VIID_DIVIDER_CNTL                              (0xff63c000 + (0x4c << 2))
#define   P_HHI_VIID_DIVIDER_CNTL                              (volatile uint32_t *)(0xff63c000 + (0x4c << 2))
//bit 1:0   mem_pd_vi_wm,  2'b00: viu1 wm memory power on, 2'b11: power down
#define     HHI_VPU_MEM_PD_REG2                                (0xff63c000 + (0x4d << 2))
#define SEC_HHI_VPU_MEM_PD_REG2                                (0xff63c000 + (0x4d << 2))
#define   P_HHI_VPU_MEM_PD_REG2                                (volatile uint32_t *)(0xff63c000 + (0x4d << 2))
// Gated clock enables.  There are 64 enables for the MPEG clocks and 32 enables for other clock domains
#define     HHI_GCLK_MPEG0                                     (0xff63c000 + (0x50 << 2))
#define SEC_HHI_GCLK_MPEG0                                     (0xff63c000 + (0x50 << 2))
#define   P_HHI_GCLK_MPEG0                                     (volatile uint32_t *)(0xff63c000 + (0x50 << 2))
#define     HHI_GCLK_MPEG1                                     (0xff63c000 + (0x51 << 2))
#define SEC_HHI_GCLK_MPEG1                                     (0xff63c000 + (0x51 << 2))
#define   P_HHI_GCLK_MPEG1                                     (volatile uint32_t *)(0xff63c000 + (0x51 << 2))
#define     HHI_GCLK_MPEG2                                     (0xff63c000 + (0x52 << 2))
#define SEC_HHI_GCLK_MPEG2                                     (0xff63c000 + (0x52 << 2))
#define   P_HHI_GCLK_MPEG2                                     (volatile uint32_t *)(0xff63c000 + (0x52 << 2))
#define     HHI_GCLK_OTHER                                     (0xff63c000 + (0x54 << 2))
#define SEC_HHI_GCLK_OTHER                                     (0xff63c000 + (0x54 << 2))
#define   P_HHI_GCLK_OTHER                                     (volatile uint32_t *)(0xff63c000 + (0x54 << 2))
#define     HHI_GCLK_AO                                        (0xff63c000 + (0x55 << 2))
#define SEC_HHI_GCLK_AO                                        (0xff63c000 + (0x55 << 2))
#define   P_HHI_GCLK_AO                                        (volatile uint32_t *)(0xff63c000 + (0x55 << 2))
//`define HHI_SYS_OSCIN_CNTL      8'h56
#define     HHI_SYS_CPU_CLK_CNTL1                              (0xff63c000 + (0x57 << 2))
#define SEC_HHI_SYS_CPU_CLK_CNTL1                              (0xff63c000 + (0x57 << 2))
#define   P_HHI_SYS_CPU_CLK_CNTL1                              (volatile uint32_t *)(0xff63c000 + (0x57 << 2))
#define     HHI_SYS_CPU_RESET_CNTL                             (0xff63c000 + (0x58 << 2))
#define SEC_HHI_SYS_CPU_RESET_CNTL                             (0xff63c000 + (0x58 << 2))
#define   P_HHI_SYS_CPU_RESET_CNTL                             (volatile uint32_t *)(0xff63c000 + (0x58 << 2))
// PLL Controls
#define     HHI_VID_CLK_DIV                                    (0xff63c000 + (0x59 << 2))
#define SEC_HHI_VID_CLK_DIV                                    (0xff63c000 + (0x59 << 2))
#define   P_HHI_VID_CLK_DIV                                    (volatile uint32_t *)(0xff63c000 + (0x59 << 2))
#define     HHI_MPEG_CLK_CNTL                                  (0xff63c000 + (0x5d << 2))
#define SEC_HHI_MPEG_CLK_CNTL                                  (0xff63c000 + (0x5d << 2))
#define   P_HHI_MPEG_CLK_CNTL                                  (volatile uint32_t *)(0xff63c000 + (0x5d << 2))
#define     HHI_AUD_CLK_CNTL                                   (0xff63c000 + (0x5e << 2))
#define SEC_HHI_AUD_CLK_CNTL                                   (0xff63c000 + (0x5e << 2))
#define   P_HHI_AUD_CLK_CNTL                                   (volatile uint32_t *)(0xff63c000 + (0x5e << 2))
#define     HHI_VID_CLK_CNTL                                   (0xff63c000 + (0x5f << 2))
#define SEC_HHI_VID_CLK_CNTL                                   (0xff63c000 + (0x5f << 2))
#define   P_HHI_VID_CLK_CNTL                                   (volatile uint32_t *)(0xff63c000 + (0x5f << 2))
#define     HHI_WIFI_CLK_CNTL                                  (0xff63c000 + (0x60 << 2))
#define SEC_HHI_WIFI_CLK_CNTL                                  (0xff63c000 + (0x60 << 2))
#define   P_HHI_WIFI_CLK_CNTL                                  (volatile uint32_t *)(0xff63c000 + (0x60 << 2))
#define     HHI_WIFI_PLL_CNTL                                  (0xff63c000 + (0x61 << 2))
#define SEC_HHI_WIFI_PLL_CNTL                                  (0xff63c000 + (0x61 << 2))
#define   P_HHI_WIFI_PLL_CNTL                                  (volatile uint32_t *)(0xff63c000 + (0x61 << 2))
#define     HHI_WIFI_PLL_CNTL2                                 (0xff63c000 + (0x62 << 2))
#define SEC_HHI_WIFI_PLL_CNTL2                                 (0xff63c000 + (0x62 << 2))
#define   P_HHI_WIFI_PLL_CNTL2                                 (volatile uint32_t *)(0xff63c000 + (0x62 << 2))
#define     HHI_WIFI_PLL_CNTL3                                 (0xff63c000 + (0x63 << 2))
#define SEC_HHI_WIFI_PLL_CNTL3                                 (0xff63c000 + (0x63 << 2))
#define   P_HHI_WIFI_PLL_CNTL3                                 (volatile uint32_t *)(0xff63c000 + (0x63 << 2))
#define     HHI_AUD_CLK_CNTL2                                  (0xff63c000 + (0x64 << 2))
#define SEC_HHI_AUD_CLK_CNTL2                                  (0xff63c000 + (0x64 << 2))
#define   P_HHI_AUD_CLK_CNTL2                                  (volatile uint32_t *)(0xff63c000 + (0x64 << 2))
#define     HHI_VID_CLK_CNTL2                                  (0xff63c000 + (0x65 << 2))
#define SEC_HHI_VID_CLK_CNTL2                                  (0xff63c000 + (0x65 << 2))
#define   P_HHI_VID_CLK_CNTL2                                  (volatile uint32_t *)(0xff63c000 + (0x65 << 2))
#define     HHI_VID_DIVIDER_CNTL                               (0xff63c000 + (0x66 << 2))
#define SEC_HHI_VID_DIVIDER_CNTL                               (0xff63c000 + (0x66 << 2))
#define   P_HHI_VID_DIVIDER_CNTL                               (volatile uint32_t *)(0xff63c000 + (0x66 << 2))
#define     HHI_SYS_CPU_CLK_CNTL                               (0xff63c000 + (0x67 << 2))
#define SEC_HHI_SYS_CPU_CLK_CNTL                               (0xff63c000 + (0x67 << 2))
#define   P_HHI_SYS_CPU_CLK_CNTL                               (volatile uint32_t *)(0xff63c000 + (0x67 << 2))
#define     HHI_VID_PLL_CLK_DIV                                (0xff63c000 + (0x68 << 2))
#define SEC_HHI_VID_PLL_CLK_DIV                                (0xff63c000 + (0x68 << 2))
#define   P_HHI_VID_PLL_CLK_DIV                                (volatile uint32_t *)(0xff63c000 + (0x68 << 2))
#define     HHI_AUD_CLK_CNTL3                                  (0xff63c000 + (0x69 << 2))
#define SEC_HHI_AUD_CLK_CNTL3                                  (0xff63c000 + (0x69 << 2))
#define   P_HHI_AUD_CLK_CNTL3                                  (volatile uint32_t *)(0xff63c000 + (0x69 << 2))
#define     HHI_AUD_CLK_CNTL4                                  (0xff63c000 + (0x6a << 2))
#define SEC_HHI_AUD_CLK_CNTL4                                  (0xff63c000 + (0x6a << 2))
#define   P_HHI_AUD_CLK_CNTL4                                  (volatile uint32_t *)(0xff63c000 + (0x6a << 2))
// Moved to Martin's domain `define HHI_DDR_PLL_CNTL        8'h68 // DDR PLL control, word 1
// Moved to Martin's domain `define HHI_DDR_PLL_CNTL2       8'h69 // DDR PLL control, word 2
// Moved to Martin's domain `define HHI_DDR_PLL_CNTL3       8'h6a // DDR PLL control, word 3
// Moved to Martin's domain `define HHI_DDR_PLL_CNTL4       8'h6b // DDR PLL control, word 3
#define     HHI_MALI_CLK_CNTL                                  (0xff63c000 + (0x6c << 2))
#define SEC_HHI_MALI_CLK_CNTL                                  (0xff63c000 + (0x6c << 2))
#define   P_HHI_MALI_CLK_CNTL                                  (volatile uint32_t *)(0xff63c000 + (0x6c << 2))
#define     HHI_MIPI_PHY_CLK_CNTL                              (0xff63c000 + (0x6e << 2))
#define SEC_HHI_MIPI_PHY_CLK_CNTL                              (0xff63c000 + (0x6e << 2))
#define   P_HHI_MIPI_PHY_CLK_CNTL                              (volatile uint32_t *)(0xff63c000 + (0x6e << 2))
#define     HHI_VPU_CLK_CNTL                                   (0xff63c000 + (0x6f << 2))
#define SEC_HHI_VPU_CLK_CNTL                                   (0xff63c000 + (0x6f << 2))
#define   P_HHI_VPU_CLK_CNTL                                   (volatile uint32_t *)(0xff63c000 + (0x6f << 2))
#define     HHI_OTHER_PLL_CNTL                                 (0xff63c000 + (0x70 << 2))
#define SEC_HHI_OTHER_PLL_CNTL                                 (0xff63c000 + (0x70 << 2))
#define   P_HHI_OTHER_PLL_CNTL                                 (volatile uint32_t *)(0xff63c000 + (0x70 << 2))
#define     HHI_OTHER_PLL_CNTL2                                (0xff63c000 + (0x71 << 2))
#define SEC_HHI_OTHER_PLL_CNTL2                                (0xff63c000 + (0x71 << 2))
#define   P_HHI_OTHER_PLL_CNTL2                                (volatile uint32_t *)(0xff63c000 + (0x71 << 2))
#define     HHI_OTHER_PLL_CNTL3                                (0xff63c000 + (0x72 << 2))
#define SEC_HHI_OTHER_PLL_CNTL3                                (0xff63c000 + (0x72 << 2))
#define   P_HHI_OTHER_PLL_CNTL3                                (volatile uint32_t *)(0xff63c000 + (0x72 << 2))
#define     HHI_HDMI_CLK_CNTL                                  (0xff63c000 + (0x73 << 2))
#define SEC_HHI_HDMI_CLK_CNTL                                  (0xff63c000 + (0x73 << 2))
#define   P_HHI_HDMI_CLK_CNTL                                  (volatile uint32_t *)(0xff63c000 + (0x73 << 2))
#define     HHI_DEMOD_CLK_CNTL                                 (0xff63c000 + (0x74 << 2))
#define SEC_HHI_DEMOD_CLK_CNTL                                 (0xff63c000 + (0x74 << 2))
#define   P_HHI_DEMOD_CLK_CNTL                                 (volatile uint32_t *)(0xff63c000 + (0x74 << 2))
#define     HHI_SATA_CLK_CNTL                                  (0xff63c000 + (0x75 << 2))
#define SEC_HHI_SATA_CLK_CNTL                                  (0xff63c000 + (0x75 << 2))
#define   P_HHI_SATA_CLK_CNTL                                  (volatile uint32_t *)(0xff63c000 + (0x75 << 2))
#define     HHI_ETH_CLK_CNTL                                   (0xff63c000 + (0x76 << 2))
#define SEC_HHI_ETH_CLK_CNTL                                   (0xff63c000 + (0x76 << 2))
#define   P_HHI_ETH_CLK_CNTL                                   (volatile uint32_t *)(0xff63c000 + (0x76 << 2))
#define     HHI_CLK_DOUBLE_CNTL                                (0xff63c000 + (0x77 << 2))
#define SEC_HHI_CLK_DOUBLE_CNTL                                (0xff63c000 + (0x77 << 2))
#define   P_HHI_CLK_DOUBLE_CNTL                                (volatile uint32_t *)(0xff63c000 + (0x77 << 2))
#define     HHI_VDEC_CLK_CNTL                                  (0xff63c000 + (0x78 << 2))
#define SEC_HHI_VDEC_CLK_CNTL                                  (0xff63c000 + (0x78 << 2))
#define   P_HHI_VDEC_CLK_CNTL                                  (volatile uint32_t *)(0xff63c000 + (0x78 << 2))
#define     HHI_VDEC2_CLK_CNTL                                 (0xff63c000 + (0x79 << 2))
#define SEC_HHI_VDEC2_CLK_CNTL                                 (0xff63c000 + (0x79 << 2))
#define   P_HHI_VDEC2_CLK_CNTL                                 (volatile uint32_t *)(0xff63c000 + (0x79 << 2))
#define     HHI_VDEC3_CLK_CNTL                                 (0xff63c000 + (0x7a << 2))
#define SEC_HHI_VDEC3_CLK_CNTL                                 (0xff63c000 + (0x7a << 2))
#define   P_HHI_VDEC3_CLK_CNTL                                 (volatile uint32_t *)(0xff63c000 + (0x7a << 2))
#define     HHI_VDEC4_CLK_CNTL                                 (0xff63c000 + (0x7b << 2))
#define SEC_HHI_VDEC4_CLK_CNTL                                 (0xff63c000 + (0x7b << 2))
#define   P_HHI_VDEC4_CLK_CNTL                                 (volatile uint32_t *)(0xff63c000 + (0x7b << 2))
#define     HHI_HDCP22_CLK_CNTL                                (0xff63c000 + (0x7c << 2))
#define SEC_HHI_HDCP22_CLK_CNTL                                (0xff63c000 + (0x7c << 2))
#define   P_HHI_HDCP22_CLK_CNTL                                (volatile uint32_t *)(0xff63c000 + (0x7c << 2))
#define     HHI_VAPBCLK_CNTL                                   (0xff63c000 + (0x7d << 2))
#define SEC_HHI_VAPBCLK_CNTL                                   (0xff63c000 + (0x7d << 2))
#define   P_HHI_VAPBCLK_CNTL                                   (volatile uint32_t *)(0xff63c000 + (0x7d << 2))
#define     HHI_VP9DEC_CLK_CNTL                                (0xff63c000 + (0x7e << 2))
#define SEC_HHI_VP9DEC_CLK_CNTL                                (0xff63c000 + (0x7e << 2))
#define   P_HHI_VP9DEC_CLK_CNTL                                (volatile uint32_t *)(0xff63c000 + (0x7e << 2))
// `define HHI_SYS_CPU_AUTO_CLK0        8'h78   never used
// `define HHI_SYS_CPU_AUTO_CLK1        8'h79   never used
// `define HHI_MEDIA_CPU_AUTO_CLK0    8'h7a     never used
// `define HHI_MEDIA_CPU_AUTO_CLK1    8'h7b     never used
#define     HHI_HDMI_AFC_CNTL                                  (0xff63c000 + (0x7f << 2))
#define SEC_HHI_HDMI_AFC_CNTL                                  (0xff63c000 + (0x7f << 2))
#define   P_HHI_HDMI_AFC_CNTL                                  (volatile uint32_t *)(0xff63c000 + (0x7f << 2))
#define     HHI_HDMIRX_CLK_CNTL                                (0xff63c000 + (0x80 << 2))
#define SEC_HHI_HDMIRX_CLK_CNTL                                (0xff63c000 + (0x80 << 2))
#define   P_HHI_HDMIRX_CLK_CNTL                                (volatile uint32_t *)(0xff63c000 + (0x80 << 2))
#define     HHI_HDMIRX_AUD_CLK_CNTL                            (0xff63c000 + (0x81 << 2))
#define SEC_HHI_HDMIRX_AUD_CLK_CNTL                            (0xff63c000 + (0x81 << 2))
#define   P_HHI_HDMIRX_AUD_CLK_CNTL                            (volatile uint32_t *)(0xff63c000 + (0x81 << 2))
#define     HHI_EDP_APB_CLK_CNTL                               (0xff63c000 + (0x82 << 2))
#define SEC_HHI_EDP_APB_CLK_CNTL                               (0xff63c000 + (0x82 << 2))
#define   P_HHI_EDP_APB_CLK_CNTL                               (volatile uint32_t *)(0xff63c000 + (0x82 << 2))
#define     HHI_VPU_CLKB_CNTL                                  (0xff63c000 + (0x83 << 2))
#define SEC_HHI_VPU_CLKB_CNTL                                  (0xff63c000 + (0x83 << 2))
#define   P_HHI_VPU_CLKB_CNTL                                  (volatile uint32_t *)(0xff63c000 + (0x83 << 2))
#define     HHI_VID_PLL_MOD_CNTL0                              (0xff63c000 + (0x84 << 2))
#define SEC_HHI_VID_PLL_MOD_CNTL0                              (0xff63c000 + (0x84 << 2))
#define   P_HHI_VID_PLL_MOD_CNTL0                              (volatile uint32_t *)(0xff63c000 + (0x84 << 2))
#define     HHI_VID_PLL_MOD_LOW_TCNT                           (0xff63c000 + (0x85 << 2))
#define SEC_HHI_VID_PLL_MOD_LOW_TCNT                           (0xff63c000 + (0x85 << 2))
#define   P_HHI_VID_PLL_MOD_LOW_TCNT                           (volatile uint32_t *)(0xff63c000 + (0x85 << 2))
#define     HHI_VID_PLL_MOD_HIGH_TCNT                          (0xff63c000 + (0x86 << 2))
#define SEC_HHI_VID_PLL_MOD_HIGH_TCNT                          (0xff63c000 + (0x86 << 2))
#define   P_HHI_VID_PLL_MOD_HIGH_TCNT                          (volatile uint32_t *)(0xff63c000 + (0x86 << 2))
#define     HHI_VID_PLL_MOD_NOM_TCNT                           (0xff63c000 + (0x87 << 2))
#define SEC_HHI_VID_PLL_MOD_NOM_TCNT                           (0xff63c000 + (0x87 << 2))
#define   P_HHI_VID_PLL_MOD_NOM_TCNT                           (volatile uint32_t *)(0xff63c000 + (0x87 << 2))
#define     HHI_USB_CLK_CNTL                                   (0xff63c000 + (0x88 << 2))
#define SEC_HHI_USB_CLK_CNTL                                   (0xff63c000 + (0x88 << 2))
#define   P_HHI_USB_CLK_CNTL                                   (volatile uint32_t *)(0xff63c000 + (0x88 << 2))
// Removed `define HHI_DDR_CLK_CNTL            8'h88
#define     HHI_32K_CLK_CNTL                                   (0xff63c000 + (0x89 << 2))
#define SEC_HHI_32K_CLK_CNTL                                   (0xff63c000 + (0x89 << 2))
#define   P_HHI_32K_CLK_CNTL                                   (volatile uint32_t *)(0xff63c000 + (0x89 << 2))
#define     HHI_GEN_CLK_CNTL                                   (0xff63c000 + (0x8a << 2))
#define SEC_HHI_GEN_CLK_CNTL                                   (0xff63c000 + (0x8a << 2))
#define   P_HHI_GEN_CLK_CNTL                                   (volatile uint32_t *)(0xff63c000 + (0x8a << 2))
#define     HHI_GEN_CLK_CNTL2                                  (0xff63c000 + (0x8b << 2))
#define SEC_HHI_GEN_CLK_CNTL2                                  (0xff63c000 + (0x8b << 2))
#define   P_HHI_GEN_CLK_CNTL2                                  (volatile uint32_t *)(0xff63c000 + (0x8b << 2))
#define     HHI_AUDPLL_CLK_OUT_CNTL                            (0xff63c000 + (0x8c << 2))
#define SEC_HHI_AUDPLL_CLK_OUT_CNTL                            (0xff63c000 + (0x8c << 2))
#define   P_HHI_AUDPLL_CLK_OUT_CNTL                            (volatile uint32_t *)(0xff63c000 + (0x8c << 2))
#define     HHI_ALOCKER_CLK_CNTL                               (0xff63c000 + (0x8d << 2))
#define SEC_HHI_ALOCKER_CLK_CNTL                               (0xff63c000 + (0x8d << 2))
#define   P_HHI_ALOCKER_CLK_CNTL                               (volatile uint32_t *)(0xff63c000 + (0x8d << 2))
#define     HHI_JTAG_CONFIG                                    (0xff63c000 + (0x8e << 2))
#define SEC_HHI_JTAG_CONFIG                                    (0xff63c000 + (0x8e << 2))
#define   P_HHI_JTAG_CONFIG                                    (volatile uint32_t *)(0xff63c000 + (0x8e << 2))
#define     HHI_VAFE_CLKXTALIN_CNTL                            (0xff63c000 + (0x8f << 2))
#define SEC_HHI_VAFE_CLKXTALIN_CNTL                            (0xff63c000 + (0x8f << 2))
#define   P_HHI_VAFE_CLKXTALIN_CNTL                            (volatile uint32_t *)(0xff63c000 + (0x8f << 2))
#define     HHI_VAFE_CLKOSCIN_CNTL                             (0xff63c000 + (0x90 << 2))
#define SEC_HHI_VAFE_CLKOSCIN_CNTL                             (0xff63c000 + (0x90 << 2))
#define   P_HHI_VAFE_CLKOSCIN_CNTL                             (volatile uint32_t *)(0xff63c000 + (0x90 << 2))
#define     HHI_VAFE_CLKIN_CNTL                                (0xff63c000 + (0x91 << 2))
#define SEC_HHI_VAFE_CLKIN_CNTL                                (0xff63c000 + (0x91 << 2))
#define   P_HHI_VAFE_CLKIN_CNTL                                (volatile uint32_t *)(0xff63c000 + (0x91 << 2))
#define     HHI_TVFE_AUTOMODE_CLK_CNTL                         (0xff63c000 + (0x92 << 2))
#define SEC_HHI_TVFE_AUTOMODE_CLK_CNTL                         (0xff63c000 + (0x92 << 2))
#define   P_HHI_TVFE_AUTOMODE_CLK_CNTL                         (volatile uint32_t *)(0xff63c000 + (0x92 << 2))
#define     HHI_VAFE_CLKPI_CNTL                                (0xff63c000 + (0x93 << 2))
#define SEC_HHI_VAFE_CLKPI_CNTL                                (0xff63c000 + (0x93 << 2))
#define   P_HHI_VAFE_CLKPI_CNTL                                (volatile uint32_t *)(0xff63c000 + (0x93 << 2))
#define     HHI_VDIN_MEAS_CLK_CNTL                             (0xff63c000 + (0x94 << 2))
#define SEC_HHI_VDIN_MEAS_CLK_CNTL                             (0xff63c000 + (0x94 << 2))
#define   P_HHI_VDIN_MEAS_CLK_CNTL                             (volatile uint32_t *)(0xff63c000 + (0x94 << 2))
// `define HHI_PCM2_CLK_CNTL           8'h95
#define     HHI_PCM_CLK_CNTL                                   (0xff63c000 + (0x96 << 2))
#define SEC_HHI_PCM_CLK_CNTL                                   (0xff63c000 + (0x96 << 2))
#define   P_HHI_PCM_CLK_CNTL                                   (volatile uint32_t *)(0xff63c000 + (0x96 << 2))
#define     HHI_NAND_CLK_CNTL                                  (0xff63c000 + (0x97 << 2))
#define SEC_HHI_NAND_CLK_CNTL                                  (0xff63c000 + (0x97 << 2))
#define   P_HHI_NAND_CLK_CNTL                                  (volatile uint32_t *)(0xff63c000 + (0x97 << 2))
#define     HHI_ISP_LED_CLK_CNTL                               (0xff63c000 + (0x98 << 2))
#define SEC_HHI_ISP_LED_CLK_CNTL                               (0xff63c000 + (0x98 << 2))
#define   P_HHI_ISP_LED_CLK_CNTL                               (volatile uint32_t *)(0xff63c000 + (0x98 << 2))
#define     HHI_SD_EMMC_CLK_CNTL                               (0xff63c000 + (0x99 << 2))
#define SEC_HHI_SD_EMMC_CLK_CNTL                               (0xff63c000 + (0x99 << 2))
#define   P_HHI_SD_EMMC_CLK_CNTL                               (volatile uint32_t *)(0xff63c000 + (0x99 << 2))
#define     HHI_EDP_TX_PHY_CNTL0                               (0xff63c000 + (0x9c << 2))
#define SEC_HHI_EDP_TX_PHY_CNTL0                               (0xff63c000 + (0x9c << 2))
#define   P_HHI_EDP_TX_PHY_CNTL0                               (volatile uint32_t *)(0xff63c000 + (0x9c << 2))
#define     HHI_EDP_TX_PHY_CNTL1                               (0xff63c000 + (0x9d << 2))
#define SEC_HHI_EDP_TX_PHY_CNTL1                               (0xff63c000 + (0x9d << 2))
#define   P_HHI_EDP_TX_PHY_CNTL1                               (volatile uint32_t *)(0xff63c000 + (0x9d << 2))
#define     HHI_ADC_PLL_CNTL5                                  (0xff63c000 + (0x9e << 2))
#define SEC_HHI_ADC_PLL_CNTL5                                  (0xff63c000 + (0x9e << 2))
#define   P_HHI_ADC_PLL_CNTL5                                  (volatile uint32_t *)(0xff63c000 + (0x9e << 2))
#define     HHI_ADC_PLL_CNTL6                                  (0xff63c000 + (0x9f << 2))
#define SEC_HHI_ADC_PLL_CNTL6                                  (0xff63c000 + (0x9f << 2))
#define   P_HHI_ADC_PLL_CNTL6                                  (volatile uint32_t *)(0xff63c000 + (0x9f << 2))
#define     HHI_MPLL_CNTL                                      (0xff63c000 + (0xa0 << 2))
#define SEC_HHI_MPLL_CNTL                                      (0xff63c000 + (0xa0 << 2))
#define   P_HHI_MPLL_CNTL                                      (volatile uint32_t *)(0xff63c000 + (0xa0 << 2))
#define     HHI_MPLL_CNTL2                                     (0xff63c000 + (0xa1 << 2))
#define SEC_HHI_MPLL_CNTL2                                     (0xff63c000 + (0xa1 << 2))
#define   P_HHI_MPLL_CNTL2                                     (volatile uint32_t *)(0xff63c000 + (0xa1 << 2))
#define     HHI_MPLL_CNTL3                                     (0xff63c000 + (0xa2 << 2))
#define SEC_HHI_MPLL_CNTL3                                     (0xff63c000 + (0xa2 << 2))
#define   P_HHI_MPLL_CNTL3                                     (volatile uint32_t *)(0xff63c000 + (0xa2 << 2))
#define     HHI_MPLL_CNTL4                                     (0xff63c000 + (0xa3 << 2))
#define SEC_HHI_MPLL_CNTL4                                     (0xff63c000 + (0xa3 << 2))
#define   P_HHI_MPLL_CNTL4                                     (volatile uint32_t *)(0xff63c000 + (0xa3 << 2))
#define     HHI_MPLL_CNTL5                                     (0xff63c000 + (0xa4 << 2))
#define SEC_HHI_MPLL_CNTL5                                     (0xff63c000 + (0xa4 << 2))
#define   P_HHI_MPLL_CNTL5                                     (volatile uint32_t *)(0xff63c000 + (0xa4 << 2))
#define     HHI_MPLL_CNTL6                                     (0xff63c000 + (0xa5 << 2))
#define SEC_HHI_MPLL_CNTL6                                     (0xff63c000 + (0xa5 << 2))
#define   P_HHI_MPLL_CNTL6                                     (volatile uint32_t *)(0xff63c000 + (0xa5 << 2))
#define     HHI_MPLL_CNTL7                                     (0xff63c000 + (0xa6 << 2))
#define SEC_HHI_MPLL_CNTL7                                     (0xff63c000 + (0xa6 << 2))
#define   P_HHI_MPLL_CNTL7                                     (volatile uint32_t *)(0xff63c000 + (0xa6 << 2))
#define     HHI_MPLL_CNTL8                                     (0xff63c000 + (0xa7 << 2))
#define SEC_HHI_MPLL_CNTL8                                     (0xff63c000 + (0xa7 << 2))
#define   P_HHI_MPLL_CNTL8                                     (volatile uint32_t *)(0xff63c000 + (0xa7 << 2))
#define     HHI_MPLL_CNTL9                                     (0xff63c000 + (0xa8 << 2))
#define SEC_HHI_MPLL_CNTL9                                     (0xff63c000 + (0xa8 << 2))
#define   P_HHI_MPLL_CNTL9                                     (volatile uint32_t *)(0xff63c000 + (0xa8 << 2))
#define     HHI_MPLL_CNTL10                                    (0xff63c000 + (0xa9 << 2))
#define SEC_HHI_MPLL_CNTL10                                    (0xff63c000 + (0xa9 << 2))
#define   P_HHI_MPLL_CNTL10                                    (volatile uint32_t *)(0xff63c000 + (0xa9 << 2))
#define     HHI_ADC_PLL_CNTL                                   (0xff63c000 + (0xaa << 2))
#define SEC_HHI_ADC_PLL_CNTL                                   (0xff63c000 + (0xaa << 2))
#define   P_HHI_ADC_PLL_CNTL                                   (volatile uint32_t *)(0xff63c000 + (0xaa << 2))
#define     HHI_ADC_PLL_CNTL2                                  (0xff63c000 + (0xab << 2))
#define SEC_HHI_ADC_PLL_CNTL2                                  (0xff63c000 + (0xab << 2))
#define   P_HHI_ADC_PLL_CNTL2                                  (volatile uint32_t *)(0xff63c000 + (0xab << 2))
#define     HHI_ADC_PLL_CNTL3                                  (0xff63c000 + (0xac << 2))
#define SEC_HHI_ADC_PLL_CNTL3                                  (0xff63c000 + (0xac << 2))
#define   P_HHI_ADC_PLL_CNTL3                                  (volatile uint32_t *)(0xff63c000 + (0xac << 2))
#define     HHI_ADC_PLL_CNTL4                                  (0xff63c000 + (0xad << 2))
#define SEC_HHI_ADC_PLL_CNTL4                                  (0xff63c000 + (0xad << 2))
#define   P_HHI_ADC_PLL_CNTL4                                  (volatile uint32_t *)(0xff63c000 + (0xad << 2))
#define     HHI_ADC_PLL_STS                                    (0xff63c000 + (0xae << 2))
#define SEC_HHI_ADC_PLL_STS                                    (0xff63c000 + (0xae << 2))
#define   P_HHI_ADC_PLL_STS                                    (volatile uint32_t *)(0xff63c000 + (0xae << 2))
#define     HHI_ADC_PLL_CNTL1                                  (0xff63c000 + (0xaf << 2))
#define SEC_HHI_ADC_PLL_CNTL1                                  (0xff63c000 + (0xaf << 2))
#define   P_HHI_ADC_PLL_CNTL1                                  (volatile uint32_t *)(0xff63c000 + (0xaf << 2))
#define     HHI_AUDCLK_PLL_CNTL                                (0xff63c000 + (0xb0 << 2))
#define SEC_HHI_AUDCLK_PLL_CNTL                                (0xff63c000 + (0xb0 << 2))
#define   P_HHI_AUDCLK_PLL_CNTL                                (volatile uint32_t *)(0xff63c000 + (0xb0 << 2))
#define     HHI_AUDCLK_PLL_CNTL2                               (0xff63c000 + (0xb1 << 2))
#define SEC_HHI_AUDCLK_PLL_CNTL2                               (0xff63c000 + (0xb1 << 2))
#define   P_HHI_AUDCLK_PLL_CNTL2                               (volatile uint32_t *)(0xff63c000 + (0xb1 << 2))
#define     HHI_AUDCLK_PLL_CNTL3                               (0xff63c000 + (0xb2 << 2))
#define SEC_HHI_AUDCLK_PLL_CNTL3                               (0xff63c000 + (0xb2 << 2))
#define   P_HHI_AUDCLK_PLL_CNTL3                               (volatile uint32_t *)(0xff63c000 + (0xb2 << 2))
#define     HHI_AUDCLK_PLL_CNTL4                               (0xff63c000 + (0xb3 << 2))
#define SEC_HHI_AUDCLK_PLL_CNTL4                               (0xff63c000 + (0xb3 << 2))
#define   P_HHI_AUDCLK_PLL_CNTL4                               (volatile uint32_t *)(0xff63c000 + (0xb3 << 2))
#define     HHI_AUDCLK_PLL_CNTL5                               (0xff63c000 + (0xb4 << 2))
#define SEC_HHI_AUDCLK_PLL_CNTL5                               (0xff63c000 + (0xb4 << 2))
#define   P_HHI_AUDCLK_PLL_CNTL5                               (volatile uint32_t *)(0xff63c000 + (0xb4 << 2))
#define     HHI_AUDCLK_PLL_CNTL6                               (0xff63c000 + (0xb5 << 2))
#define SEC_HHI_AUDCLK_PLL_CNTL6                               (0xff63c000 + (0xb5 << 2))
#define   P_HHI_AUDCLK_PLL_CNTL6                               (volatile uint32_t *)(0xff63c000 + (0xb5 << 2))
#define     HHI_L2_DDR_CLK_CNTL                                (0xff63c000 + (0xb6 << 2))
#define SEC_HHI_L2_DDR_CLK_CNTL                                (0xff63c000 + (0xb6 << 2))
#define   P_HHI_L2_DDR_CLK_CNTL                                (volatile uint32_t *)(0xff63c000 + (0xb6 << 2))
#define     HHI_MPLL3_CNTL0                                    (0xff63c000 + (0xb8 << 2))
#define SEC_HHI_MPLL3_CNTL0                                    (0xff63c000 + (0xb8 << 2))
#define   P_HHI_MPLL3_CNTL0                                    (volatile uint32_t *)(0xff63c000 + (0xb8 << 2))
#define     HHI_MPLL3_CNTL1                                    (0xff63c000 + (0xb9 << 2))
#define SEC_HHI_MPLL3_CNTL1                                    (0xff63c000 + (0xb9 << 2))
#define   P_HHI_MPLL3_CNTL1                                    (volatile uint32_t *)(0xff63c000 + (0xb9 << 2))
#define     HHI_PLL_TOP_MISC                                   (0xff63c000 + (0xba << 2))
#define SEC_HHI_PLL_TOP_MISC                                   (0xff63c000 + (0xba << 2))
#define   P_HHI_PLL_TOP_MISC                                   (volatile uint32_t *)(0xff63c000 + (0xba << 2))
#define     HHI_VDAC_CNTL0                                     (0xff63c000 + (0xbd << 2))
#define SEC_HHI_VDAC_CNTL0                                     (0xff63c000 + (0xbd << 2))
#define   P_HHI_VDAC_CNTL0                                     (volatile uint32_t *)(0xff63c000 + (0xbd << 2))
#define     HHI_VDAC_CNTL1                                     (0xff63c000 + (0xbe << 2))
#define SEC_HHI_VDAC_CNTL1                                     (0xff63c000 + (0xbe << 2))
#define   P_HHI_VDAC_CNTL1                                     (volatile uint32_t *)(0xff63c000 + (0xbe << 2))
#define     HHI_SYS_PLL_CNTL1                                  (0xff63c000 + (0xbf << 2))
#define SEC_HHI_SYS_PLL_CNTL1                                  (0xff63c000 + (0xbf << 2))
#define   P_HHI_SYS_PLL_CNTL1                                  (volatile uint32_t *)(0xff63c000 + (0xbf << 2))
#define     HHI_SYS_PLL_CNTL                                   (0xff63c000 + (0xc0 << 2))
#define SEC_HHI_SYS_PLL_CNTL                                   (0xff63c000 + (0xc0 << 2))
#define   P_HHI_SYS_PLL_CNTL                                   (volatile uint32_t *)(0xff63c000 + (0xc0 << 2))
#define     HHI_SYS_PLL_CNTL2                                  (0xff63c000 + (0xc1 << 2))
#define SEC_HHI_SYS_PLL_CNTL2                                  (0xff63c000 + (0xc1 << 2))
#define   P_HHI_SYS_PLL_CNTL2                                  (volatile uint32_t *)(0xff63c000 + (0xc1 << 2))
#define     HHI_SYS_PLL_CNTL3                                  (0xff63c000 + (0xc2 << 2))
#define SEC_HHI_SYS_PLL_CNTL3                                  (0xff63c000 + (0xc2 << 2))
#define   P_HHI_SYS_PLL_CNTL3                                  (volatile uint32_t *)(0xff63c000 + (0xc2 << 2))
#define     HHI_SYS_PLL_CNTL4                                  (0xff63c000 + (0xc3 << 2))
#define SEC_HHI_SYS_PLL_CNTL4                                  (0xff63c000 + (0xc3 << 2))
#define   P_HHI_SYS_PLL_CNTL4                                  (volatile uint32_t *)(0xff63c000 + (0xc3 << 2))
#define     HHI_SYS_PLL_CNTL5                                  (0xff63c000 + (0xc4 << 2))
#define SEC_HHI_SYS_PLL_CNTL5                                  (0xff63c000 + (0xc4 << 2))
#define   P_HHI_SYS_PLL_CNTL5                                  (volatile uint32_t *)(0xff63c000 + (0xc4 << 2))
#define     HHI_SYS_PLL_STS                                    (0xff63c000 + (0xc5 << 2))
#define SEC_HHI_SYS_PLL_STS                                    (0xff63c000 + (0xc5 << 2))
#define   P_HHI_SYS_PLL_STS                                    (volatile uint32_t *)(0xff63c000 + (0xc5 << 2))
#define     HHI_DPLL_TOP_I                                     (0xff63c000 + (0xc6 << 2))
#define SEC_HHI_DPLL_TOP_I                                     (0xff63c000 + (0xc6 << 2))
#define   P_HHI_DPLL_TOP_I                                     (volatile uint32_t *)(0xff63c000 + (0xc6 << 2))
#define     HHI_DPLL_TOP2_I                                    (0xff63c000 + (0xc7 << 2))
#define SEC_HHI_DPLL_TOP2_I                                    (0xff63c000 + (0xc7 << 2))
#define   P_HHI_DPLL_TOP2_I                                    (volatile uint32_t *)(0xff63c000 + (0xc7 << 2))
#define     HHI_HDMI_PLL_CNTL                                  (0xff63c000 + (0xc8 << 2))
#define SEC_HHI_HDMI_PLL_CNTL                                  (0xff63c000 + (0xc8 << 2))
#define   P_HHI_HDMI_PLL_CNTL                                  (volatile uint32_t *)(0xff63c000 + (0xc8 << 2))
#define     HHI_HDMI_PLL_CNTL1                                 (0xff63c000 + (0xc9 << 2))
#define SEC_HHI_HDMI_PLL_CNTL1                                 (0xff63c000 + (0xc9 << 2))
#define   P_HHI_HDMI_PLL_CNTL1                                 (volatile uint32_t *)(0xff63c000 + (0xc9 << 2))
#define     HHI_HDMI_PLL_CNTL2                                 (0xff63c000 + (0xca << 2))
#define SEC_HHI_HDMI_PLL_CNTL2                                 (0xff63c000 + (0xca << 2))
#define   P_HHI_HDMI_PLL_CNTL2                                 (volatile uint32_t *)(0xff63c000 + (0xca << 2))
#define     HHI_HDMI_PLL_CNTL3                                 (0xff63c000 + (0xcb << 2))
#define SEC_HHI_HDMI_PLL_CNTL3                                 (0xff63c000 + (0xcb << 2))
#define   P_HHI_HDMI_PLL_CNTL3                                 (volatile uint32_t *)(0xff63c000 + (0xcb << 2))
#define     HHI_HDMI_PLL_CNTL4                                 (0xff63c000 + (0xcc << 2))
#define SEC_HHI_HDMI_PLL_CNTL4                                 (0xff63c000 + (0xcc << 2))
#define   P_HHI_HDMI_PLL_CNTL4                                 (volatile uint32_t *)(0xff63c000 + (0xcc << 2))
#define     HHI_HDMI_PLL_CNTL5                                 (0xff63c000 + (0xcd << 2))
#define SEC_HHI_HDMI_PLL_CNTL5                                 (0xff63c000 + (0xcd << 2))
#define   P_HHI_HDMI_PLL_CNTL5                                 (volatile uint32_t *)(0xff63c000 + (0xcd << 2))
#define     HHI_HDMI_PLL_STS                                   (0xff63c000 + (0xce << 2))
#define SEC_HHI_HDMI_PLL_STS                                   (0xff63c000 + (0xce << 2))
#define   P_HHI_HDMI_PLL_STS                                   (volatile uint32_t *)(0xff63c000 + (0xce << 2))
#define     HHI_DSI_LVDS_EDP_CNTL0                             (0xff63c000 + (0xd1 << 2))
#define SEC_HHI_DSI_LVDS_EDP_CNTL0                             (0xff63c000 + (0xd1 << 2))
#define   P_HHI_DSI_LVDS_EDP_CNTL0                             (volatile uint32_t *)(0xff63c000 + (0xd1 << 2))
#define     HHI_DSI_LVDS_EDP_CNTL1                             (0xff63c000 + (0xd2 << 2))
#define SEC_HHI_DSI_LVDS_EDP_CNTL1                             (0xff63c000 + (0xd2 << 2))
#define   P_HHI_DSI_LVDS_EDP_CNTL1                             (volatile uint32_t *)(0xff63c000 + (0xd2 << 2))
#define     HHI_CSI_PHY_CNTL0                                  (0xff63c000 + (0xd3 << 2))
#define SEC_HHI_CSI_PHY_CNTL0                                  (0xff63c000 + (0xd3 << 2))
#define   P_HHI_CSI_PHY_CNTL0                                  (volatile uint32_t *)(0xff63c000 + (0xd3 << 2))
#define     HHI_CSI_PHY_CNTL1                                  (0xff63c000 + (0xd4 << 2))
#define SEC_HHI_CSI_PHY_CNTL1                                  (0xff63c000 + (0xd4 << 2))
#define   P_HHI_CSI_PHY_CNTL1                                  (volatile uint32_t *)(0xff63c000 + (0xd4 << 2))
#define     HHI_CSI_PHY_CNTL2                                  (0xff63c000 + (0xd5 << 2))
#define SEC_HHI_CSI_PHY_CNTL2                                  (0xff63c000 + (0xd5 << 2))
#define   P_HHI_CSI_PHY_CNTL2                                  (volatile uint32_t *)(0xff63c000 + (0xd5 << 2))
#define     HHI_CSI_PHY_CNTL3                                  (0xff63c000 + (0xd6 << 2))
#define SEC_HHI_CSI_PHY_CNTL3                                  (0xff63c000 + (0xd6 << 2))
#define   P_HHI_CSI_PHY_CNTL3                                  (volatile uint32_t *)(0xff63c000 + (0xd6 << 2))
#define     HHI_CSI_PHY_CNTL4                                  (0xff63c000 + (0xd7 << 2))
#define SEC_HHI_CSI_PHY_CNTL4                                  (0xff63c000 + (0xd7 << 2))
#define   P_HHI_CSI_PHY_CNTL4                                  (volatile uint32_t *)(0xff63c000 + (0xd7 << 2))
#define     HHI_DIF_CSI_PHY_CNTL0                              (0xff63c000 + (0xd8 << 2))
#define SEC_HHI_DIF_CSI_PHY_CNTL0                              (0xff63c000 + (0xd8 << 2))
#define   P_HHI_DIF_CSI_PHY_CNTL0                              (volatile uint32_t *)(0xff63c000 + (0xd8 << 2))
#define     HHI_DIF_CSI_PHY_CNTL1                              (0xff63c000 + (0xd9 << 2))
#define SEC_HHI_DIF_CSI_PHY_CNTL1                              (0xff63c000 + (0xd9 << 2))
#define   P_HHI_DIF_CSI_PHY_CNTL1                              (volatile uint32_t *)(0xff63c000 + (0xd9 << 2))
#define     HHI_DIF_CSI_PHY_CNTL2                              (0xff63c000 + (0xda << 2))
#define SEC_HHI_DIF_CSI_PHY_CNTL2                              (0xff63c000 + (0xda << 2))
#define   P_HHI_DIF_CSI_PHY_CNTL2                              (volatile uint32_t *)(0xff63c000 + (0xda << 2))
#define     HHI_DIF_CSI_PHY_CNTL3                              (0xff63c000 + (0xdb << 2))
#define SEC_HHI_DIF_CSI_PHY_CNTL3                              (0xff63c000 + (0xdb << 2))
#define   P_HHI_DIF_CSI_PHY_CNTL3                              (volatile uint32_t *)(0xff63c000 + (0xdb << 2))
#define     HHI_DIF_CSI_PHY_CNTL4                              (0xff63c000 + (0xdc << 2))
#define SEC_HHI_DIF_CSI_PHY_CNTL4                              (0xff63c000 + (0xdc << 2))
#define   P_HHI_DIF_CSI_PHY_CNTL4                              (volatile uint32_t *)(0xff63c000 + (0xdc << 2))
#define     HHI_DIF_CSI_PHY_CNTL5                              (0xff63c000 + (0xdd << 2))
#define SEC_HHI_DIF_CSI_PHY_CNTL5                              (0xff63c000 + (0xdd << 2))
#define   P_HHI_DIF_CSI_PHY_CNTL5                              (volatile uint32_t *)(0xff63c000 + (0xdd << 2))
#define     HHI_LVDS_TX_PHY_CNTL0                              (0xff63c000 + (0xde << 2))
#define SEC_HHI_LVDS_TX_PHY_CNTL0                              (0xff63c000 + (0xde << 2))
#define   P_HHI_LVDS_TX_PHY_CNTL0                              (volatile uint32_t *)(0xff63c000 + (0xde << 2))
#define     HHI_LVDS_TX_PHY_CNTL1                              (0xff63c000 + (0xdf << 2))
#define SEC_HHI_LVDS_TX_PHY_CNTL1                              (0xff63c000 + (0xdf << 2))
#define   P_HHI_LVDS_TX_PHY_CNTL1                              (volatile uint32_t *)(0xff63c000 + (0xdf << 2))
#define     HHI_VID2_PLL_CNTL                                  (0xff63c000 + (0xe0 << 2))
#define SEC_HHI_VID2_PLL_CNTL                                  (0xff63c000 + (0xe0 << 2))
#define   P_HHI_VID2_PLL_CNTL                                  (volatile uint32_t *)(0xff63c000 + (0xe0 << 2))
#define     HHI_VID2_PLL_CNTL2                                 (0xff63c000 + (0xe1 << 2))
#define SEC_HHI_VID2_PLL_CNTL2                                 (0xff63c000 + (0xe1 << 2))
#define   P_HHI_VID2_PLL_CNTL2                                 (volatile uint32_t *)(0xff63c000 + (0xe1 << 2))
#define     HHI_VID2_PLL_CNTL3                                 (0xff63c000 + (0xe2 << 2))
#define SEC_HHI_VID2_PLL_CNTL3                                 (0xff63c000 + (0xe2 << 2))
#define   P_HHI_VID2_PLL_CNTL3                                 (volatile uint32_t *)(0xff63c000 + (0xe2 << 2))
#define     HHI_VID2_PLL_CNTL4                                 (0xff63c000 + (0xe3 << 2))
#define SEC_HHI_VID2_PLL_CNTL4                                 (0xff63c000 + (0xe3 << 2))
#define   P_HHI_VID2_PLL_CNTL4                                 (volatile uint32_t *)(0xff63c000 + (0xe3 << 2))
#define     HHI_VID2_PLL_CNTL5                                 (0xff63c000 + (0xe4 << 2))
#define SEC_HHI_VID2_PLL_CNTL5                                 (0xff63c000 + (0xe4 << 2))
#define   P_HHI_VID2_PLL_CNTL5                                 (volatile uint32_t *)(0xff63c000 + (0xe4 << 2))
#define     HHI_VID2_PLL_CNTL_I                                (0xff63c000 + (0xe5 << 2))
#define SEC_HHI_VID2_PLL_CNTL_I                                (0xff63c000 + (0xe5 << 2))
#define   P_HHI_VID2_PLL_CNTL_I                                (volatile uint32_t *)(0xff63c000 + (0xe5 << 2))
#define     HHI_HDMI_PHY_CNTL0                                 (0xff63c000 + (0xe8 << 2))
#define SEC_HHI_HDMI_PHY_CNTL0                                 (0xff63c000 + (0xe8 << 2))
#define   P_HHI_HDMI_PHY_CNTL0                                 (volatile uint32_t *)(0xff63c000 + (0xe8 << 2))
#define     HHI_HDMI_PHY_CNTL1                                 (0xff63c000 + (0xe9 << 2))
#define SEC_HHI_HDMI_PHY_CNTL1                                 (0xff63c000 + (0xe9 << 2))
#define   P_HHI_HDMI_PHY_CNTL1                                 (volatile uint32_t *)(0xff63c000 + (0xe9 << 2))
#define     HHI_HDMI_PHY_CNTL2                                 (0xff63c000 + (0xea << 2))
#define SEC_HHI_HDMI_PHY_CNTL2                                 (0xff63c000 + (0xea << 2))
#define   P_HHI_HDMI_PHY_CNTL2                                 (volatile uint32_t *)(0xff63c000 + (0xea << 2))
#define     HHI_HDMI_PHY_CNTL3                                 (0xff63c000 + (0xeb << 2))
#define SEC_HHI_HDMI_PHY_CNTL3                                 (0xff63c000 + (0xeb << 2))
#define   P_HHI_HDMI_PHY_CNTL3                                 (volatile uint32_t *)(0xff63c000 + (0xeb << 2))
#define     HHI_HDMI_PHY_CNTL4                                 (0xff63c000 + (0xec << 2))
#define SEC_HHI_HDMI_PHY_CNTL4                                 (0xff63c000 + (0xec << 2))
#define   P_HHI_HDMI_PHY_CNTL4                                 (volatile uint32_t *)(0xff63c000 + (0xec << 2))
#define     HHI_HDMI_PHY_STATUS                                (0xff63c000 + (0xed << 2))
#define SEC_HHI_HDMI_PHY_STATUS                                (0xff63c000 + (0xed << 2))
#define   P_HHI_HDMI_PHY_STATUS                                (volatile uint32_t *)(0xff63c000 + (0xed << 2))
//`define HHI_ADEC_SYS_CLK_CNTL       8'hf1
#define     HHI_VID_LOCK_CLK_CNTL                              (0xff63c000 + (0xf2 << 2))
#define SEC_HHI_VID_LOCK_CLK_CNTL                              (0xff63c000 + (0xf2 << 2))
#define   P_HHI_VID_LOCK_CLK_CNTL                              (volatile uint32_t *)(0xff63c000 + (0xf2 << 2))
#define     HHI_ATV_DMD_SYS_CLK_CNTL                           (0xff63c000 + (0xf3 << 2))
#define SEC_HHI_ATV_DMD_SYS_CLK_CNTL                           (0xff63c000 + (0xf3 << 2))
#define   P_HHI_ATV_DMD_SYS_CLK_CNTL                           (volatile uint32_t *)(0xff63c000 + (0xf3 << 2))
#define     HHI_EE_MISC_CNTL                                   (0xff63c000 + (0xf4 << 2))
#define SEC_HHI_EE_MISC_CNTL                                   (0xff63c000 + (0xf4 << 2))
#define   P_HHI_EE_MISC_CNTL                                   (volatile uint32_t *)(0xff63c000 + (0xf4 << 2))
#define     HHI_BT656_CLK_CNTL                                 (0xff63c000 + (0xf5 << 2))
#define SEC_HHI_BT656_CLK_CNTL                                 (0xff63c000 + (0xf5 << 2))
#define   P_HHI_BT656_CLK_CNTL                                 (volatile uint32_t *)(0xff63c000 + (0xf5 << 2))
//`define HHI_SAR_CLK_CNTL            8'hf6
#define     HHI_HDMIRX_AUD_PLL_CNTL                            (0xff63c000 + (0xf8 << 2))
#define SEC_HHI_HDMIRX_AUD_PLL_CNTL                            (0xff63c000 + (0xf8 << 2))
#define   P_HHI_HDMIRX_AUD_PLL_CNTL                            (volatile uint32_t *)(0xff63c000 + (0xf8 << 2))
#define     HHI_HDMIRX_AUD_PLL_CNTL2                           (0xff63c000 + (0xf9 << 2))
#define SEC_HHI_HDMIRX_AUD_PLL_CNTL2                           (0xff63c000 + (0xf9 << 2))
#define   P_HHI_HDMIRX_AUD_PLL_CNTL2                           (volatile uint32_t *)(0xff63c000 + (0xf9 << 2))
#define     HHI_HDMIRX_AUD_PLL_CNTL3                           (0xff63c000 + (0xfa << 2))
#define SEC_HHI_HDMIRX_AUD_PLL_CNTL3                           (0xff63c000 + (0xfa << 2))
#define   P_HHI_HDMIRX_AUD_PLL_CNTL3                           (volatile uint32_t *)(0xff63c000 + (0xfa << 2))
#define     HHI_HDMIRX_AUD_PLL_CNTL4                           (0xff63c000 + (0xfb << 2))
#define SEC_HHI_HDMIRX_AUD_PLL_CNTL4                           (0xff63c000 + (0xfb << 2))
#define   P_HHI_HDMIRX_AUD_PLL_CNTL4                           (volatile uint32_t *)(0xff63c000 + (0xfb << 2))
#define     HHI_HDMIRX_AUD_PLL_CNTL5                           (0xff63c000 + (0xfc << 2))
#define SEC_HHI_HDMIRX_AUD_PLL_CNTL5                           (0xff63c000 + (0xfc << 2))
#define   P_HHI_HDMIRX_AUD_PLL_CNTL5                           (volatile uint32_t *)(0xff63c000 + (0xfc << 2))
#define     HHI_HDMIRX_AUD_PLL_CNTL6                           (0xff63c000 + (0xfd << 2))
#define SEC_HHI_HDMIRX_AUD_PLL_CNTL6                           (0xff63c000 + (0xfd << 2))
#define   P_HHI_HDMIRX_AUD_PLL_CNTL6                           (volatile uint32_t *)(0xff63c000 + (0xfd << 2))
#define     HHI_HDMIRX_AUD_PLL_CNTL_I                          (0xff63c000 + (0xfe << 2))
#define SEC_HHI_HDMIRX_AUD_PLL_CNTL_I                          (0xff63c000 + (0xfe << 2))
#define   P_HHI_HDMIRX_AUD_PLL_CNTL_I                          (volatile uint32_t *)(0xff63c000 + (0xfe << 2))
//========================================================================
//  HIU - Mailbox
//========================================================================
// APB4_DECODER_NON_SECURE_BASE     32'hFF63C400
// APB4_DECODER_SECURE_BASE         32'hFF63C400
#define     HIU_MAILBOX_SET_0                                  (0xff63c400 + (0x01 << 2))
#define SEC_HIU_MAILBOX_SET_0                                  (0xff63c400 + (0x01 << 2))
#define   P_HIU_MAILBOX_SET_0                                  (volatile uint32_t *)(0xff63c400 + (0x01 << 2))
#define     HIU_MAILBOX_STAT_0                                 (0xff63c400 + (0x02 << 2))
#define SEC_HIU_MAILBOX_STAT_0                                 (0xff63c400 + (0x02 << 2))
#define   P_HIU_MAILBOX_STAT_0                                 (volatile uint32_t *)(0xff63c400 + (0x02 << 2))
#define     HIU_MAILBOX_CLR_0                                  (0xff63c400 + (0x03 << 2))
#define SEC_HIU_MAILBOX_CLR_0                                  (0xff63c400 + (0x03 << 2))
#define   P_HIU_MAILBOX_CLR_0                                  (volatile uint32_t *)(0xff63c400 + (0x03 << 2))
#define     HIU_MAILBOX_SET_1                                  (0xff63c400 + (0x04 << 2))
#define SEC_HIU_MAILBOX_SET_1                                  (0xff63c400 + (0x04 << 2))
#define   P_HIU_MAILBOX_SET_1                                  (volatile uint32_t *)(0xff63c400 + (0x04 << 2))
#define     HIU_MAILBOX_STAT_1                                 (0xff63c400 + (0x05 << 2))
#define SEC_HIU_MAILBOX_STAT_1                                 (0xff63c400 + (0x05 << 2))
#define   P_HIU_MAILBOX_STAT_1                                 (volatile uint32_t *)(0xff63c400 + (0x05 << 2))
#define     HIU_MAILBOX_CLR_1                                  (0xff63c400 + (0x06 << 2))
#define SEC_HIU_MAILBOX_CLR_1                                  (0xff63c400 + (0x06 << 2))
#define   P_HIU_MAILBOX_CLR_1                                  (volatile uint32_t *)(0xff63c400 + (0x06 << 2))
#define     HIU_MAILBOX_SET_2                                  (0xff63c400 + (0x07 << 2))
#define SEC_HIU_MAILBOX_SET_2                                  (0xff63c400 + (0x07 << 2))
#define   P_HIU_MAILBOX_SET_2                                  (volatile uint32_t *)(0xff63c400 + (0x07 << 2))
#define     HIU_MAILBOX_STAT_2                                 (0xff63c400 + (0x08 << 2))
#define SEC_HIU_MAILBOX_STAT_2                                 (0xff63c400 + (0x08 << 2))
#define   P_HIU_MAILBOX_STAT_2                                 (volatile uint32_t *)(0xff63c400 + (0x08 << 2))
#define     HIU_MAILBOX_CLR_2                                  (0xff63c400 + (0x09 << 2))
#define SEC_HIU_MAILBOX_CLR_2                                  (0xff63c400 + (0x09 << 2))
#define   P_HIU_MAILBOX_CLR_2                                  (volatile uint32_t *)(0xff63c400 + (0x09 << 2))
#define     HIU_MAILBOX_SET_3                                  (0xff63c400 + (0x0a << 2))
#define SEC_HIU_MAILBOX_SET_3                                  (0xff63c400 + (0x0a << 2))
#define   P_HIU_MAILBOX_SET_3                                  (volatile uint32_t *)(0xff63c400 + (0x0a << 2))
#define     HIU_MAILBOX_STAT_3                                 (0xff63c400 + (0x0b << 2))
#define SEC_HIU_MAILBOX_STAT_3                                 (0xff63c400 + (0x0b << 2))
#define   P_HIU_MAILBOX_STAT_3                                 (volatile uint32_t *)(0xff63c400 + (0x0b << 2))
#define     HIU_MAILBOX_CLR_3                                  (0xff63c400 + (0x0c << 2))
#define SEC_HIU_MAILBOX_CLR_3                                  (0xff63c400 + (0x0c << 2))
#define   P_HIU_MAILBOX_CLR_3                                  (volatile uint32_t *)(0xff63c400 + (0x0c << 2))
#define     HIU_MAILBOX_SET_4                                  (0xff63c400 + (0x0d << 2))
#define SEC_HIU_MAILBOX_SET_4                                  (0xff63c400 + (0x0d << 2))
#define   P_HIU_MAILBOX_SET_4                                  (volatile uint32_t *)(0xff63c400 + (0x0d << 2))
#define     HIU_MAILBOX_STAT_4                                 (0xff63c400 + (0x0e << 2))
#define SEC_HIU_MAILBOX_STAT_4                                 (0xff63c400 + (0x0e << 2))
#define   P_HIU_MAILBOX_STAT_4                                 (volatile uint32_t *)(0xff63c400 + (0x0e << 2))
#define     HIU_MAILBOX_CLR_4                                  (0xff63c400 + (0x0f << 2))
#define SEC_HIU_MAILBOX_CLR_4                                  (0xff63c400 + (0x0f << 2))
#define   P_HIU_MAILBOX_CLR_4                                  (volatile uint32_t *)(0xff63c400 + (0x0f << 2))
#define     HIU_MAILBOX_SET_5                                  (0xff63c400 + (0x10 << 2))
#define SEC_HIU_MAILBOX_SET_5                                  (0xff63c400 + (0x10 << 2))
#define   P_HIU_MAILBOX_SET_5                                  (volatile uint32_t *)(0xff63c400 + (0x10 << 2))
#define     HIU_MAILBOX_STAT_5                                 (0xff63c400 + (0x11 << 2))
#define SEC_HIU_MAILBOX_STAT_5                                 (0xff63c400 + (0x11 << 2))
#define   P_HIU_MAILBOX_STAT_5                                 (volatile uint32_t *)(0xff63c400 + (0x11 << 2))
#define     HIU_MAILBOX_CLR_5                                  (0xff63c400 + (0x12 << 2))
#define SEC_HIU_MAILBOX_CLR_5                                  (0xff63c400 + (0x12 << 2))
#define   P_HIU_MAILBOX_CLR_5                                  (volatile uint32_t *)(0xff63c400 + (0x12 << 2))
//========================================================================
//  EFUSE
//========================================================================
//  APB4_DECODER_NON_SECURE_BASE     32'hFF630000
//  APB4_DECODER_SECURE_BASE         32'hFF630000
#define     EFUSE_CLR                                          (0xff630000 + (0x00 << 2))
#define SEC_EFUSE_CLR                                          (0xff630000 + (0x00 << 2))
#define   P_EFUSE_CLR                                          (volatile uint32_t *)(0xff630000 + (0x00 << 2))
#define     EFUSE_START                                        (0xff630000 + (0x01 << 2))
#define SEC_EFUSE_START                                        (0xff630000 + (0x01 << 2))
#define   P_EFUSE_START                                        (volatile uint32_t *)(0xff630000 + (0x01 << 2))
#define     EFUSE_WDATA0                                       (0xff630000 + (0x04 << 2))
#define SEC_EFUSE_WDATA0                                       (0xff630000 + (0x04 << 2))
#define   P_EFUSE_WDATA0                                       (volatile uint32_t *)(0xff630000 + (0x04 << 2))
#define     EFUSE_WDATA1                                       (0xff630000 + (0x05 << 2))
#define SEC_EFUSE_WDATA1                                       (0xff630000 + (0x05 << 2))
#define   P_EFUSE_WDATA1                                       (volatile uint32_t *)(0xff630000 + (0x05 << 2))
#define     EFUSE_WDATA2                                       (0xff630000 + (0x06 << 2))
#define SEC_EFUSE_WDATA2                                       (0xff630000 + (0x06 << 2))
#define   P_EFUSE_WDATA2                                       (volatile uint32_t *)(0xff630000 + (0x06 << 2))
#define     EFUSE_WDATA3                                       (0xff630000 + (0x07 << 2))
#define SEC_EFUSE_WDATA3                                       (0xff630000 + (0x07 << 2))
#define   P_EFUSE_WDATA3                                       (volatile uint32_t *)(0xff630000 + (0x07 << 2))
#define     EFUSE_RDATA0                                       (0xff630000 + (0x08 << 2))
#define SEC_EFUSE_RDATA0                                       (0xff630000 + (0x08 << 2))
#define   P_EFUSE_RDATA0                                       (volatile uint32_t *)(0xff630000 + (0x08 << 2))
#define     EFUSE_RDATA1                                       (0xff630000 + (0x09 << 2))
#define SEC_EFUSE_RDATA1                                       (0xff630000 + (0x09 << 2))
#define   P_EFUSE_RDATA1                                       (volatile uint32_t *)(0xff630000 + (0x09 << 2))
#define     EFUSE_RDATA2                                       (0xff630000 + (0x0a << 2))
#define SEC_EFUSE_RDATA2                                       (0xff630000 + (0x0a << 2))
#define   P_EFUSE_RDATA2                                       (volatile uint32_t *)(0xff630000 + (0x0a << 2))
#define     EFUSE_RDATA3                                       (0xff630000 + (0x0b << 2))
#define SEC_EFUSE_RDATA3                                       (0xff630000 + (0x0b << 2))
#define   P_EFUSE_RDATA3                                       (volatile uint32_t *)(0xff630000 + (0x0b << 2))
#define     KL_START0                                          (0xff630000 + (0x20 << 2))
#define SEC_KL_START0                                          (0xff630000 + (0x20 << 2))
#define   P_KL_START0                                          (volatile uint32_t *)(0xff630000 + (0x20 << 2))
#define     KL_START1                                          (0xff630000 + (0x21 << 2))
#define SEC_KL_START1                                          (0xff630000 + (0x21 << 2))
#define   P_KL_START1                                          (volatile uint32_t *)(0xff630000 + (0x21 << 2))
#define     KL_RESP0_0                                         (0xff630000 + (0x24 << 2))
#define SEC_KL_RESP0_0                                         (0xff630000 + (0x24 << 2))
#define   P_KL_RESP0_0                                         (volatile uint32_t *)(0xff630000 + (0x24 << 2))
#define     KL_RESP0_1                                         (0xff630000 + (0x25 << 2))
#define SEC_KL_RESP0_1                                         (0xff630000 + (0x25 << 2))
#define   P_KL_RESP0_1                                         (volatile uint32_t *)(0xff630000 + (0x25 << 2))
#define     KL_RESP0_2                                         (0xff630000 + (0x26 << 2))
#define SEC_KL_RESP0_2                                         (0xff630000 + (0x26 << 2))
#define   P_KL_RESP0_2                                         (volatile uint32_t *)(0xff630000 + (0x26 << 2))
#define     KL_RESP0_3                                         (0xff630000 + (0x27 << 2))
#define SEC_KL_RESP0_3                                         (0xff630000 + (0x27 << 2))
#define   P_KL_RESP0_3                                         (volatile uint32_t *)(0xff630000 + (0x27 << 2))
#define     KL_RESP1_0                                         (0xff630000 + (0x28 << 2))
#define SEC_KL_RESP1_0                                         (0xff630000 + (0x28 << 2))
#define   P_KL_RESP1_0                                         (volatile uint32_t *)(0xff630000 + (0x28 << 2))
#define     KL_RESP1_1                                         (0xff630000 + (0x29 << 2))
#define SEC_KL_RESP1_1                                         (0xff630000 + (0x29 << 2))
#define   P_KL_RESP1_1                                         (volatile uint32_t *)(0xff630000 + (0x29 << 2))
#define     KL_RESP1_2                                         (0xff630000 + (0x2a << 2))
#define SEC_KL_RESP1_2                                         (0xff630000 + (0x2a << 2))
#define   P_KL_RESP1_2                                         (volatile uint32_t *)(0xff630000 + (0x2a << 2))
#define     KL_RESP1_3                                         (0xff630000 + (0x2b << 2))
#define SEC_KL_RESP1_3                                         (0xff630000 + (0x2b << 2))
#define   P_KL_RESP1_3                                         (volatile uint32_t *)(0xff630000 + (0x2b << 2))
#define     KL_RAM                                             (0xff630000 + (0x40 << 2))
#define SEC_KL_RAM                                             (0xff630000 + (0x40 << 2))
#define   P_KL_RAM                                             (volatile uint32_t *)(0xff630000 + (0x40 << 2))
// synopsys translate_off
// synopsys translate_on
//
// Closing file:  ./secure_apb4_ee.h
//
//
// Reading file:  ./ao_rti_reg.h
//
//#define AO_RTI_REG_BASE 0x00
// APB4_DECODER_NON_SECURE_BASE     32'hFF800000
// APB4_DECODER_SECURE_BASE         32'hFF800000
// Registers not affected by the Watchdog timer
#define     AO_RTI_STATUS_REG0                                 (0xff800000 + (0x00 << 2))
#define SEC_AO_RTI_STATUS_REG0                                 (0xff800000 + (0x00 << 2))
#define   P_AO_RTI_STATUS_REG0                                 (volatile uint32_t *)(0xff800000 + (0x00 << 2))
#define     AO_RTI_STATUS_REG1                                 (0xff800000 + (0x01 << 2))
#define SEC_AO_RTI_STATUS_REG1                                 (0xff800000 + (0x01 << 2))
#define   P_AO_RTI_STATUS_REG1                                 (volatile uint32_t *)(0xff800000 + (0x01 << 2))
#define     AO_RTI_STATUS_REG2                                 (0xff800000 + (0x02 << 2))
#define SEC_AO_RTI_STATUS_REG2                                 (0xff800000 + (0x02 << 2))
#define   P_AO_RTI_STATUS_REG2                                 (volatile uint32_t *)(0xff800000 + (0x02 << 2))
#define     AO_RTI_PWR_CNTL_REG1                               (0xff800000 + (0x03 << 2))
#define SEC_AO_RTI_PWR_CNTL_REG1                               (0xff800000 + (0x03 << 2))
#define   P_AO_RTI_PWR_CNTL_REG1                               (volatile uint32_t *)(0xff800000 + (0x03 << 2))
#define     AO_RTI_PWR_CNTL_REG0                               (0xff800000 + (0x04 << 2))
#define SEC_AO_RTI_PWR_CNTL_REG0                               (0xff800000 + (0x04 << 2))
#define   P_AO_RTI_PWR_CNTL_REG0                               (volatile uint32_t *)(0xff800000 + (0x04 << 2))
#define     AO_RTI_PIN_MUX_REG                                 (0xff800000 + (0x05 << 2))
#define SEC_AO_RTI_PIN_MUX_REG                                 (0xff800000 + (0x05 << 2))
#define   P_AO_RTI_PIN_MUX_REG                                 (volatile uint32_t *)(0xff800000 + (0x05 << 2))
#define     AO_RTI_PIN_MUX_REG2                                (0xff800000 + (0x06 << 2))
#define SEC_AO_RTI_PIN_MUX_REG2                                (0xff800000 + (0x06 << 2))
#define   P_AO_RTI_PIN_MUX_REG2                                (volatile uint32_t *)(0xff800000 + (0x06 << 2))
#define     AO_RTI_STATUS_REG3                                 (0xff800000 + (0x07 << 2))
#define SEC_AO_RTI_STATUS_REG3                                 (0xff800000 + (0x07 << 2))
#define   P_AO_RTI_STATUS_REG3                                 (volatile uint32_t *)(0xff800000 + (0x07 << 2))
//`define AO_REMAP_REG0               8'h07 //TODO: DELETE. NOT USED
#define     AO_REMAP_REG1                                      (0xff800000 + (0x08 << 2))
#define SEC_AO_REMAP_REG1                                      (0xff800000 + (0x08 << 2))
#define   P_AO_REMAP_REG1                                      (volatile uint32_t *)(0xff800000 + (0x08 << 2))
#define     AO_GPIO_O_EN_N                                     (0xff800000 + (0x09 << 2))
#define SEC_AO_GPIO_O_EN_N                                     (0xff800000 + (0x09 << 2))
#define   P_AO_GPIO_O_EN_N                                     (volatile uint32_t *)(0xff800000 + (0x09 << 2))
#define     AO_GPIO_I                                          (0xff800000 + (0x0a << 2))
#define SEC_AO_GPIO_I                                          (0xff800000 + (0x0a << 2))
#define   P_AO_GPIO_I                                          (volatile uint32_t *)(0xff800000 + (0x0a << 2))
#define     AO_RTI_PULL_UP_REG                                 (0xff800000 + (0x0b << 2))
#define SEC_AO_RTI_PULL_UP_REG                                 (0xff800000 + (0x0b << 2))
#define   P_AO_RTI_PULL_UP_REG                                 (volatile uint32_t *)(0xff800000 + (0x0b << 2))
#define     AO_RTI_JTAG_CONFIG_REG                             (0xff800000 + (0x0c << 2))
#define SEC_AO_RTI_JTAG_CONFIG_REG                             (0xff800000 + (0x0c << 2))
#define   P_AO_RTI_JTAG_CONFIG_REG                             (volatile uint32_t *)(0xff800000 + (0x0c << 2))
#define     AO_RTI_WD_MARK                                     (0xff800000 + (0x0d << 2))
#define SEC_AO_RTI_WD_MARK                                     (0xff800000 + (0x0d << 2))
#define   P_AO_RTI_WD_MARK                                     (volatile uint32_t *)(0xff800000 + (0x0d << 2))
// sando add for AO CPU
#define     AO_CPU_CNTL                                        (0xff800000 + (0x0e << 2))
#define SEC_AO_CPU_CNTL                                        (0xff800000 + (0x0e << 2))
#define   P_AO_CPU_CNTL                                        (volatile uint32_t *)(0xff800000 + (0x0e << 2))
#define     AO_CPU_CNTL2                                       (0xff800000 + (0x0f << 2))
#define SEC_AO_CPU_CNTL2                                       (0xff800000 + (0x0f << 2))
#define   P_AO_CPU_CNTL2                                       (volatile uint32_t *)(0xff800000 + (0x0f << 2))
#define     AO_RTI_GEN_CNTL_REG0                               (0xff800000 + (0x10 << 2))
#define SEC_AO_RTI_GEN_CNTL_REG0                               (0xff800000 + (0x10 << 2))
#define   P_AO_RTI_GEN_CNTL_REG0                               (volatile uint32_t *)(0xff800000 + (0x10 << 2))
#define     AO_CPU_CNTL_NS                                     (0xff800000 + (0x11 << 2))
#define SEC_AO_CPU_CNTL_NS                                     (0xff800000 + (0x11 << 2))
#define   P_AO_CPU_CNTL_NS                                     (volatile uint32_t *)(0xff800000 + (0x11 << 2))
#define     AO_TIMER_REG                                       (0xff800000 + (0x13 << 2))
#define SEC_AO_TIMER_REG                                       (0xff800000 + (0x13 << 2))
#define   P_AO_TIMER_REG                                       (volatile uint32_t *)(0xff800000 + (0x13 << 2))
#define     AO_TIMERA_REG                                      (0xff800000 + (0x14 << 2))
#define SEC_AO_TIMERA_REG                                      (0xff800000 + (0x14 << 2))
#define   P_AO_TIMERA_REG                                      (volatile uint32_t *)(0xff800000 + (0x14 << 2))
#define     AO_TIMERE_REG                                      (0xff800000 + (0x15 << 2))
#define SEC_AO_TIMERE_REG                                      (0xff800000 + (0x15 << 2))
#define   P_AO_TIMERE_REG                                      (volatile uint32_t *)(0xff800000 + (0x15 << 2))
#define     AO_OSCIN_CNTL                                      (0xff800000 + (0x16 << 2))
#define SEC_AO_OSCIN_CNTL                                      (0xff800000 + (0x16 << 2))
#define   P_AO_OSCIN_CNTL                                      (volatile uint32_t *)(0xff800000 + (0x16 << 2))
#define     AO_AHB2DDR_CNTL                                    (0xff800000 + (0x18 << 2))
#define SEC_AO_AHB2DDR_CNTL                                    (0xff800000 + (0x18 << 2))
#define   P_AO_AHB2DDR_CNTL                                    (volatile uint32_t *)(0xff800000 + (0x18 << 2))
#define     AO_TIMEBASE_CNTL                                   (0xff800000 + (0x19 << 2))
#define SEC_AO_TIMEBASE_CNTL                                   (0xff800000 + (0x19 << 2))
#define   P_AO_TIMEBASE_CNTL                                   (volatile uint32_t *)(0xff800000 + (0x19 << 2))
//`define AO_CRT_CLK_CNTL1            8'h1a
#define     AO_GEN_CLK_CNTL                                    (0xff800000 + (0x1a << 2))
#define SEC_AO_GEN_CLK_CNTL                                    (0xff800000 + (0x1a << 2))
#define   P_AO_GEN_CLK_CNTL                                    (volatile uint32_t *)(0xff800000 + (0x1a << 2))
#define     AO_RTI_INTER_OSC_CTL0                              (0xff800000 + (0x1b << 2))
#define SEC_AO_RTI_INTER_OSC_CTL0                              (0xff800000 + (0x1b << 2))
#define   P_AO_RTI_INTER_OSC_CTL0                              (volatile uint32_t *)(0xff800000 + (0x1b << 2))
#define     AO_RTI_INTER_OSC_CTL1                              (0xff800000 + (0x1c << 2))
#define SEC_AO_RTI_INTER_OSC_CTL1                              (0xff800000 + (0x1c << 2))
#define   P_AO_RTI_INTER_OSC_CTL1                              (volatile uint32_t *)(0xff800000 + (0x1c << 2))
#define     AO_CEC_CLK_CNTL_REG0                               (0xff800000 + (0x1d << 2))
#define SEC_AO_CEC_CLK_CNTL_REG0                               (0xff800000 + (0x1d << 2))
#define   P_AO_CEC_CLK_CNTL_REG0                               (volatile uint32_t *)(0xff800000 + (0x1d << 2))
#define     AO_CEC_CLK_CNTL_REG1                               (0xff800000 + (0x1e << 2))
#define SEC_AO_CEC_CLK_CNTL_REG1                               (0xff800000 + (0x1e << 2))
#define   P_AO_CEC_CLK_CNTL_REG1                               (volatile uint32_t *)(0xff800000 + (0x1e << 2))
#define     AO_METAL_REVISION                                  (0xff800000 + (0x1f << 2))
#define SEC_AO_METAL_REVISION                                  (0xff800000 + (0x1f << 2))
#define   P_AO_METAL_REVISION                                  (volatile uint32_t *)(0xff800000 + (0x1f << 2))
#define     AO_IRQ_MASK_FIQ_SEL                                (0xff800000 + (0x20 << 2))
#define SEC_AO_IRQ_MASK_FIQ_SEL                                (0xff800000 + (0x20 << 2))
#define   P_AO_IRQ_MASK_FIQ_SEL                                (volatile uint32_t *)(0xff800000 + (0x20 << 2))
#define     AO_IRQ_GPIO_REG                                    (0xff800000 + (0x21 << 2))
#define SEC_AO_IRQ_GPIO_REG                                    (0xff800000 + (0x21 << 2))
#define   P_AO_IRQ_GPIO_REG                                    (volatile uint32_t *)(0xff800000 + (0x21 << 2))
#define     AO_IRQ_STAT                                        (0xff800000 + (0x22 << 2))
#define SEC_AO_IRQ_STAT                                        (0xff800000 + (0x22 << 2))
#define   P_AO_IRQ_STAT                                        (volatile uint32_t *)(0xff800000 + (0x22 << 2))
#define     AO_IRQ_STAT_CLR                                    (0xff800000 + (0x23 << 2))
#define SEC_AO_IRQ_STAT_CLR                                    (0xff800000 + (0x23 << 2))
#define   P_AO_IRQ_STAT_CLR                                    (volatile uint32_t *)(0xff800000 + (0x23 << 2))
#define     AO_SAR_CLK                                         (0xff800000 + (0x24 << 2))
#define SEC_AO_SAR_CLK                                         (0xff800000 + (0x24 << 2))
#define   P_AO_SAR_CLK                                         (volatile uint32_t *)(0xff800000 + (0x24 << 2))
#define     AO_RTC_ALT_CLK_CNTL0                               (0xff800000 + (0x25 << 2))
#define SEC_AO_RTC_ALT_CLK_CNTL0                               (0xff800000 + (0x25 << 2))
#define   P_AO_RTC_ALT_CLK_CNTL0                               (volatile uint32_t *)(0xff800000 + (0x25 << 2))
#define     AO_RTC_ALT_CLK_CNTL1                               (0xff800000 + (0x26 << 2))
#define SEC_AO_RTC_ALT_CLK_CNTL1                               (0xff800000 + (0x26 << 2))
#define   P_AO_RTC_ALT_CLK_CNTL1                               (volatile uint32_t *)(0xff800000 + (0x26 << 2))
#define     AO_TIMESTAMP_CNTL2                                 (0xff800000 + (0x27 << 2))
#define SEC_AO_TIMESTAMP_CNTL2                                 (0xff800000 + (0x27 << 2))
#define   P_AO_TIMESTAMP_CNTL2                                 (volatile uint32_t *)(0xff800000 + (0x27 << 2))
#define     AO_DEBUG_REG0                                      (0xff800000 + (0x28 << 2))
#define SEC_AO_DEBUG_REG0                                      (0xff800000 + (0x28 << 2))
#define   P_AO_DEBUG_REG0                                      (volatile uint32_t *)(0xff800000 + (0x28 << 2))
#define     AO_DEBUG_REG1                                      (0xff800000 + (0x29 << 2))
#define SEC_AO_DEBUG_REG1                                      (0xff800000 + (0x29 << 2))
#define   P_AO_DEBUG_REG1                                      (volatile uint32_t *)(0xff800000 + (0x29 << 2))
#define     AO_DEBUG_REG2                                      (0xff800000 + (0x2a << 2))
#define SEC_AO_DEBUG_REG2                                      (0xff800000 + (0x2a << 2))
#define   P_AO_DEBUG_REG2                                      (volatile uint32_t *)(0xff800000 + (0x2a << 2))
#define     AO_DEBUG_REG3                                      (0xff800000 + (0x2b << 2))
#define SEC_AO_DEBUG_REG3                                      (0xff800000 + (0x2b << 2))
#define   P_AO_DEBUG_REG3                                      (volatile uint32_t *)(0xff800000 + (0x2b << 2))
#define     AO_TIMESTAMP_CNTL1                                 (0xff800000 + (0x2c << 2))
#define SEC_AO_TIMESTAMP_CNTL1                                 (0xff800000 + (0x2c << 2))
#define   P_AO_TIMESTAMP_CNTL1                                 (volatile uint32_t *)(0xff800000 + (0x2c << 2))
#define     AO_TIMESTAMP_CNTL                                  (0xff800000 + (0x2d << 2))
#define SEC_AO_TIMESTAMP_CNTL                                  (0xff800000 + (0x2d << 2))
#define   P_AO_TIMESTAMP_CNTL                                  (volatile uint32_t *)(0xff800000 + (0x2d << 2))
#define     AO_TIMESTAMP_RD0                                   (0xff800000 + (0x2e << 2))
#define SEC_AO_TIMESTAMP_RD0                                   (0xff800000 + (0x2e << 2))
#define   P_AO_TIMESTAMP_RD0                                   (volatile uint32_t *)(0xff800000 + (0x2e << 2))
#define     AO_TIMESTAMP_RD1                                   (0xff800000 + (0x2f << 2))
#define SEC_AO_TIMESTAMP_RD1                                   (0xff800000 + (0x2f << 2))
#define   P_AO_TIMESTAMP_RD1                                   (volatile uint32_t *)(0xff800000 + (0x2f << 2))
#define     AO_IR_BLASTER_ADDR0                                (0xff800000 + (0x30 << 2))
#define SEC_AO_IR_BLASTER_ADDR0                                (0xff800000 + (0x30 << 2))
#define   P_AO_IR_BLASTER_ADDR0                                (volatile uint32_t *)(0xff800000 + (0x30 << 2))
#define     AO_IR_BLASTER_ADDR1                                (0xff800000 + (0x31 << 2))
#define SEC_AO_IR_BLASTER_ADDR1                                (0xff800000 + (0x31 << 2))
#define   P_AO_IR_BLASTER_ADDR1                                (volatile uint32_t *)(0xff800000 + (0x31 << 2))
#define     AO_IR_BLASTER_ADDR2                                (0xff800000 + (0x32 << 2))
#define SEC_AO_IR_BLASTER_ADDR2                                (0xff800000 + (0x32 << 2))
#define   P_AO_IR_BLASTER_ADDR2                                (volatile uint32_t *)(0xff800000 + (0x32 << 2))
#define     AO_CPU_STAT1                                       (0xff800000 + (0x33 << 2))
#define SEC_AO_CPU_STAT1                                       (0xff800000 + (0x33 << 2))
#define   P_AO_CPU_STAT1                                       (volatile uint32_t *)(0xff800000 + (0x33 << 2))
#define     AO_CPU_STAT2                                       (0xff800000 + (0x34 << 2))
#define SEC_AO_CPU_STAT2                                       (0xff800000 + (0x34 << 2))
#define   P_AO_CPU_STAT2                                       (volatile uint32_t *)(0xff800000 + (0x34 << 2))
#define     AO_CPU_TIMESTAMP                                   (0xff800000 + (0x35 << 2))
#define SEC_AO_CPU_TIMESTAMP                                   (0xff800000 + (0x35 << 2))
#define   P_AO_CPU_TIMESTAMP                                   (volatile uint32_t *)(0xff800000 + (0x35 << 2))
#define     AO_CPU_TIMESTAMP2                                  (0xff800000 + (0x36 << 2))
#define SEC_AO_CPU_TIMESTAMP2                                  (0xff800000 + (0x36 << 2))
#define   P_AO_CPU_TIMESTAMP2                                  (volatile uint32_t *)(0xff800000 + (0x36 << 2))
#define     AO_CPU_CNTL3                                       (0xff800000 + (0x37 << 2))
#define SEC_AO_CPU_CNTL3                                       (0xff800000 + (0x37 << 2))
#define   P_AO_CPU_CNTL3                                       (volatile uint32_t *)(0xff800000 + (0x37 << 2))
// general Power control
#define     AO_RTI_PWR_SYS_CPU_CNTL0                           (0xff800000 + (0x38 << 2))
#define SEC_AO_RTI_PWR_SYS_CPU_CNTL0                           (0xff800000 + (0x38 << 2))
#define   P_AO_RTI_PWR_SYS_CPU_CNTL0                           (volatile uint32_t *)(0xff800000 + (0x38 << 2))
#define     AO_RTI_PWR_SYS_CPU_CNTL1                           (0xff800000 + (0x39 << 2))
#define SEC_AO_RTI_PWR_SYS_CPU_CNTL1                           (0xff800000 + (0x39 << 2))
#define   P_AO_RTI_PWR_SYS_CPU_CNTL1                           (volatile uint32_t *)(0xff800000 + (0x39 << 2))
#define     AO_RTI_GEN_PWR_SLEEP0                              (0xff800000 + (0x3a << 2))
#define SEC_AO_RTI_GEN_PWR_SLEEP0                              (0xff800000 + (0x3a << 2))
#define   P_AO_RTI_GEN_PWR_SLEEP0                              (volatile uint32_t *)(0xff800000 + (0x3a << 2))
#define     AO_RTI_GEN_PWR_ISO0                                (0xff800000 + (0x3b << 2))
#define SEC_AO_RTI_GEN_PWR_ISO0                                (0xff800000 + (0x3b << 2))
#define   P_AO_RTI_GEN_PWR_ISO0                                (volatile uint32_t *)(0xff800000 + (0x3b << 2))
#define     AO_RTI_GEN_PWR_ACK0                                (0xff800000 + (0x3c << 2))
#define SEC_AO_RTI_GEN_PWR_ACK0                                (0xff800000 + (0x3c << 2))
#define   P_AO_RTI_GEN_PWR_ACK0                                (volatile uint32_t *)(0xff800000 + (0x3c << 2))
#define     AO_RTI_PWR_SYS_CPU_MEM_PD0                         (0xff800000 + (0x3d << 2))
#define SEC_AO_RTI_PWR_SYS_CPU_MEM_PD0                         (0xff800000 + (0x3d << 2))
#define   P_AO_RTI_PWR_SYS_CPU_MEM_PD0                         (volatile uint32_t *)(0xff800000 + (0x3d << 2))
#define     AO_RTI_PWR_SYS_CPU_MEM_PD1                         (0xff800000 + (0x3e << 2))
#define SEC_AO_RTI_PWR_SYS_CPU_MEM_PD1                         (0xff800000 + (0x3e << 2))
#define   P_AO_RTI_PWR_SYS_CPU_MEM_PD1                         (volatile uint32_t *)(0xff800000 + (0x3e << 2))
#define     AO_CPU_CNTL4                                       (0xff800000 + (0x3f << 2))
#define SEC_AO_CPU_CNTL4                                       (0xff800000 + (0x3f << 2))
#define   P_AO_CPU_CNTL4                                       (volatile uint32_t *)(0xff800000 + (0x3f << 2))
#define     AO_CEC_GEN_CNTL                                    (0xff800000 + (0x40 << 2))
#define SEC_AO_CEC_GEN_CNTL                                    (0xff800000 + (0x40 << 2))
#define   P_AO_CEC_GEN_CNTL                                    (volatile uint32_t *)(0xff800000 + (0x40 << 2))
#define     AO_CEC_RW_REG                                      (0xff800000 + (0x41 << 2))
#define SEC_AO_CEC_RW_REG                                      (0xff800000 + (0x41 << 2))
#define   P_AO_CEC_RW_REG                                      (volatile uint32_t *)(0xff800000 + (0x41 << 2))
#define     AO_CEC_INTR_MASKN                                  (0xff800000 + (0x42 << 2))
#define SEC_AO_CEC_INTR_MASKN                                  (0xff800000 + (0x42 << 2))
#define   P_AO_CEC_INTR_MASKN                                  (volatile uint32_t *)(0xff800000 + (0x42 << 2))
#define     AO_CEC_INTR_CLR                                    (0xff800000 + (0x43 << 2))
#define SEC_AO_CEC_INTR_CLR                                    (0xff800000 + (0x43 << 2))
#define   P_AO_CEC_INTR_CLR                                    (volatile uint32_t *)(0xff800000 + (0x43 << 2))
#define     AO_CEC_INTR_STAT                                   (0xff800000 + (0x44 << 2))
#define SEC_AO_CEC_INTR_STAT                                   (0xff800000 + (0x44 << 2))
#define   P_AO_CEC_INTR_STAT                                   (volatile uint32_t *)(0xff800000 + (0x44 << 2))
#define     AO_CPU_CNTL5                                       (0xff800000 + (0x45 << 2))
#define SEC_AO_CPU_CNTL5                                       (0xff800000 + (0x45 << 2))
#define   P_AO_CPU_CNTL5                                       (volatile uint32_t *)(0xff800000 + (0x45 << 2))
#define     AO_WATCHDOG_CNTL                                   (0xff800000 + (0x48 << 2))
#define SEC_AO_WATCHDOG_CNTL                                   (0xff800000 + (0x48 << 2))
#define   P_AO_WATCHDOG_CNTL                                   (volatile uint32_t *)(0xff800000 + (0x48 << 2))
#define     AO_WATCHDOG_CNTL1                                  (0xff800000 + (0x49 << 2))
#define SEC_AO_WATCHDOG_CNTL1                                  (0xff800000 + (0x49 << 2))
#define   P_AO_WATCHDOG_CNTL1                                  (volatile uint32_t *)(0xff800000 + (0x49 << 2))
#define     AO_WATCHDOG_TCNT                                   (0xff800000 + (0x4a << 2))
#define SEC_AO_WATCHDOG_TCNT                                   (0xff800000 + (0x4a << 2))
#define   P_AO_WATCHDOG_TCNT                                   (volatile uint32_t *)(0xff800000 + (0x4a << 2))
#define     AO_WATCHDOG_RESET                                  (0xff800000 + (0x4b << 2))
#define SEC_AO_WATCHDOG_RESET                                  (0xff800000 + (0x4b << 2))
#define   P_AO_WATCHDOG_RESET                                  (volatile uint32_t *)(0xff800000 + (0x4b << 2))
#define     AO_RTI_STICKY_REG0                                 (0xff800000 + (0x4c << 2))
#define SEC_AO_RTI_STICKY_REG0                                 (0xff800000 + (0x4c << 2))
#define   P_AO_RTI_STICKY_REG0                                 (volatile uint32_t *)(0xff800000 + (0x4c << 2))
#define     AO_RTI_STICKY_REG1                                 (0xff800000 + (0x4d << 2))
#define SEC_AO_RTI_STICKY_REG1                                 (0xff800000 + (0x4d << 2))
#define   P_AO_RTI_STICKY_REG1                                 (volatile uint32_t *)(0xff800000 + (0x4d << 2))
#define     AO_RTI_STICKY_REG2                                 (0xff800000 + (0x4e << 2))
#define SEC_AO_RTI_STICKY_REG2                                 (0xff800000 + (0x4e << 2))
#define   P_AO_RTI_STICKY_REG2                                 (volatile uint32_t *)(0xff800000 + (0x4e << 2))
#define     AO_RTI_STICKY_REG3                                 (0xff800000 + (0x4f << 2))
#define SEC_AO_RTI_STICKY_REG3                                 (0xff800000 + (0x4f << 2))
#define   P_AO_RTI_STICKY_REG3                                 (volatile uint32_t *)(0xff800000 + (0x4f << 2))
//
// Secure APB3 Slot 2 registers
//
#define     AO_SEC_REG0                                        (0xff800000 + (0x50 << 2))
#define SEC_AO_SEC_REG0                                        (0xff800000 + (0x50 << 2))
#define   P_AO_SEC_REG0                                        (volatile uint32_t *)(0xff800000 + (0x50 << 2))
#define     AO_SEC_REG1                                        (0xff800000 + (0x51 << 2))
#define SEC_AO_SEC_REG1                                        (0xff800000 + (0x51 << 2))
#define   P_AO_SEC_REG1                                        (volatile uint32_t *)(0xff800000 + (0x51 << 2))
#define     AO_SEC_REG2                                        (0xff800000 + (0x52 << 2))
#define SEC_AO_SEC_REG2                                        (0xff800000 + (0x52 << 2))
#define   P_AO_SEC_REG2                                        (volatile uint32_t *)(0xff800000 + (0x52 << 2))
#define     AO_SEC_TMODE_PWD0                                  (0xff800000 + (0x58 << 2))
#define SEC_AO_SEC_TMODE_PWD0                                  (0xff800000 + (0x58 << 2))
#define   P_AO_SEC_TMODE_PWD0                                  (volatile uint32_t *)(0xff800000 + (0x58 << 2))
#define     AO_SEC_TMODE_PWD1                                  (0xff800000 + (0x59 << 2))
#define SEC_AO_SEC_TMODE_PWD1                                  (0xff800000 + (0x59 << 2))
#define   P_AO_SEC_TMODE_PWD1                                  (volatile uint32_t *)(0xff800000 + (0x59 << 2))
#define     AO_SEC_TMODE_PWD2                                  (0xff800000 + (0x5a << 2))
#define SEC_AO_SEC_TMODE_PWD2                                  (0xff800000 + (0x5a << 2))
#define   P_AO_SEC_TMODE_PWD2                                  (volatile uint32_t *)(0xff800000 + (0x5a << 2))
#define     AO_SEC_TMODE_PWD3                                  (0xff800000 + (0x5b << 2))
#define SEC_AO_SEC_TMODE_PWD3                                  (0xff800000 + (0x5b << 2))
#define   P_AO_SEC_TMODE_PWD3                                  (volatile uint32_t *)(0xff800000 + (0x5b << 2))
#define     AO_SEC_SCRATCH                                     (0xff800000 + (0x5f << 2))
#define SEC_AO_SEC_SCRATCH                                     (0xff800000 + (0x5f << 2))
#define   P_AO_SEC_SCRATCH                                     (volatile uint32_t *)(0xff800000 + (0x5f << 2))
#define     AO_SEC_JTAG_PWD0                                   (0xff800000 + (0x60 << 2))
#define SEC_AO_SEC_JTAG_PWD0                                   (0xff800000 + (0x60 << 2))
#define   P_AO_SEC_JTAG_PWD0                                   (volatile uint32_t *)(0xff800000 + (0x60 << 2))
#define     AO_SEC_JTAG_PWD1                                   (0xff800000 + (0x61 << 2))
#define SEC_AO_SEC_JTAG_PWD1                                   (0xff800000 + (0x61 << 2))
#define   P_AO_SEC_JTAG_PWD1                                   (volatile uint32_t *)(0xff800000 + (0x61 << 2))
#define     AO_SEC_JTAG_PWD2                                   (0xff800000 + (0x62 << 2))
#define SEC_AO_SEC_JTAG_PWD2                                   (0xff800000 + (0x62 << 2))
#define   P_AO_SEC_JTAG_PWD2                                   (volatile uint32_t *)(0xff800000 + (0x62 << 2))
#define     AO_SEC_JTAG_PWD3                                   (0xff800000 + (0x63 << 2))
#define SEC_AO_SEC_JTAG_PWD3                                   (0xff800000 + (0x63 << 2))
#define   P_AO_SEC_JTAG_PWD3                                   (volatile uint32_t *)(0xff800000 + (0x63 << 2))
#define     AO_SEC_JTAG_SEC_CNTL                               (0xff800000 + (0x64 << 2))
#define SEC_AO_SEC_JTAG_SEC_CNTL                               (0xff800000 + (0x64 << 2))
#define   P_AO_SEC_JTAG_SEC_CNTL                               (volatile uint32_t *)(0xff800000 + (0x64 << 2))
#define     AO_SEC_JTAG_PWD_ADDR0                              (0xff800000 + (0x65 << 2))
#define SEC_AO_SEC_JTAG_PWD_ADDR0                              (0xff800000 + (0x65 << 2))
#define   P_AO_SEC_JTAG_PWD_ADDR0                              (volatile uint32_t *)(0xff800000 + (0x65 << 2))
#define     AO_SEC_JTAG_PWD_ADDR1                              (0xff800000 + (0x66 << 2))
#define SEC_AO_SEC_JTAG_PWD_ADDR1                              (0xff800000 + (0x66 << 2))
#define   P_AO_SEC_JTAG_PWD_ADDR1                              (volatile uint32_t *)(0xff800000 + (0x66 << 2))
#define     AO_SEC_JTAG_PWD_ADDR2                              (0xff800000 + (0x67 << 2))
#define SEC_AO_SEC_JTAG_PWD_ADDR2                              (0xff800000 + (0x67 << 2))
#define   P_AO_SEC_JTAG_PWD_ADDR2                              (volatile uint32_t *)(0xff800000 + (0x67 << 2))
#define     AO_SEC_JTAG_PWD_ADDR3                              (0xff800000 + (0x68 << 2))
#define SEC_AO_SEC_JTAG_PWD_ADDR3                              (0xff800000 + (0x68 << 2))
#define   P_AO_SEC_JTAG_PWD_ADDR3                              (volatile uint32_t *)(0xff800000 + (0x68 << 2))
#define     AO_SEC_SHARED_AHB_SRAM_REG0_0                      (0xff800000 + (0x70 << 2))
#define SEC_AO_SEC_SHARED_AHB_SRAM_REG0_0                      (0xff800000 + (0x70 << 2))
#define   P_AO_SEC_SHARED_AHB_SRAM_REG0_0                      (volatile uint32_t *)(0xff800000 + (0x70 << 2))
#define     AO_SEC_SHARED_AHB_SRAM_REG0_1                      (0xff800000 + (0x71 << 2))
#define SEC_AO_SEC_SHARED_AHB_SRAM_REG0_1                      (0xff800000 + (0x71 << 2))
#define   P_AO_SEC_SHARED_AHB_SRAM_REG0_1                      (volatile uint32_t *)(0xff800000 + (0x71 << 2))
#define     AO_SEC_SHARED_AHB_SRAM_REG0_2                      (0xff800000 + (0x72 << 2))
#define SEC_AO_SEC_SHARED_AHB_SRAM_REG0_2                      (0xff800000 + (0x72 << 2))
#define   P_AO_SEC_SHARED_AHB_SRAM_REG0_2                      (volatile uint32_t *)(0xff800000 + (0x72 << 2))
#define     AO_SEC_SHARED_AHB_SRAM_REG1_0                      (0xff800000 + (0x73 << 2))
#define SEC_AO_SEC_SHARED_AHB_SRAM_REG1_0                      (0xff800000 + (0x73 << 2))
#define   P_AO_SEC_SHARED_AHB_SRAM_REG1_0                      (volatile uint32_t *)(0xff800000 + (0x73 << 2))
#define     AO_SEC_SHARED_AHB_SRAM_REG1_1                      (0xff800000 + (0x74 << 2))
#define SEC_AO_SEC_SHARED_AHB_SRAM_REG1_1                      (0xff800000 + (0x74 << 2))
#define   P_AO_SEC_SHARED_AHB_SRAM_REG1_1                      (volatile uint32_t *)(0xff800000 + (0x74 << 2))
#define     AO_SEC_SHARED_AHB_SRAM_REG1_2                      (0xff800000 + (0x75 << 2))
#define SEC_AO_SEC_SHARED_AHB_SRAM_REG1_2                      (0xff800000 + (0x75 << 2))
#define   P_AO_SEC_SHARED_AHB_SRAM_REG1_2                      (volatile uint32_t *)(0xff800000 + (0x75 << 2))
#define     AO_SEC_SHARED_AHB_SRAM_REG2_0                      (0xff800000 + (0x76 << 2))
#define SEC_AO_SEC_SHARED_AHB_SRAM_REG2_0                      (0xff800000 + (0x76 << 2))
#define   P_AO_SEC_SHARED_AHB_SRAM_REG2_0                      (volatile uint32_t *)(0xff800000 + (0x76 << 2))
#define     AO_SEC_SHARED_AHB_SRAM_REG2_1                      (0xff800000 + (0x77 << 2))
#define SEC_AO_SEC_SHARED_AHB_SRAM_REG2_1                      (0xff800000 + (0x77 << 2))
#define   P_AO_SEC_SHARED_AHB_SRAM_REG2_1                      (volatile uint32_t *)(0xff800000 + (0x77 << 2))
#define     AO_SEC_SHARED_AHB_SRAM_REG2_2                      (0xff800000 + (0x78 << 2))
#define SEC_AO_SEC_SHARED_AHB_SRAM_REG2_2                      (0xff800000 + (0x78 << 2))
#define   P_AO_SEC_SHARED_AHB_SRAM_REG2_2                      (volatile uint32_t *)(0xff800000 + (0x78 << 2))
#define     AO_SEC_SHARED_AHB_SRAM_REG3_0                      (0xff800000 + (0x79 << 2))
#define SEC_AO_SEC_SHARED_AHB_SRAM_REG3_0                      (0xff800000 + (0x79 << 2))
#define   P_AO_SEC_SHARED_AHB_SRAM_REG3_0                      (volatile uint32_t *)(0xff800000 + (0x79 << 2))
#define     AO_SEC_SHARED_AHB_SRAM_REG3_1                      (0xff800000 + (0x7a << 2))
#define SEC_AO_SEC_SHARED_AHB_SRAM_REG3_1                      (0xff800000 + (0x7a << 2))
#define   P_AO_SEC_SHARED_AHB_SRAM_REG3_1                      (volatile uint32_t *)(0xff800000 + (0x7a << 2))
#define     AO_SEC_SHARED_AHB_SRAM_REG3_2                      (0xff800000 + (0x7b << 2))
#define SEC_AO_SEC_SHARED_AHB_SRAM_REG3_2                      (0xff800000 + (0x7b << 2))
#define   P_AO_SEC_SHARED_AHB_SRAM_REG3_2                      (volatile uint32_t *)(0xff800000 + (0x7b << 2))
#define     AO_SEC_AO_AHB_SRAM_REG0_0                          (0xff800000 + (0x7c << 2))
#define SEC_AO_SEC_AO_AHB_SRAM_REG0_0                          (0xff800000 + (0x7c << 2))
#define   P_AO_SEC_AO_AHB_SRAM_REG0_0                          (volatile uint32_t *)(0xff800000 + (0x7c << 2))
#define     AO_SEC_AO_AHB_SRAM_REG0_1                          (0xff800000 + (0x7d << 2))
#define SEC_AO_SEC_AO_AHB_SRAM_REG0_1                          (0xff800000 + (0x7d << 2))
#define   P_AO_SEC_AO_AHB_SRAM_REG0_1                          (volatile uint32_t *)(0xff800000 + (0x7d << 2))
#define     AO_SEC_AO_AHB_SRAM_REG1_0                          (0xff800000 + (0x7e << 2))
#define SEC_AO_SEC_AO_AHB_SRAM_REG1_0                          (0xff800000 + (0x7e << 2))
#define   P_AO_SEC_AO_AHB_SRAM_REG1_0                          (volatile uint32_t *)(0xff800000 + (0x7e << 2))
#define     AO_SEC_AO_AHB_SRAM_REG1_1                          (0xff800000 + (0x7f << 2))
#define SEC_AO_SEC_AO_AHB_SRAM_REG1_1                          (0xff800000 + (0x7f << 2))
#define   P_AO_SEC_AO_AHB_SRAM_REG1_1                          (volatile uint32_t *)(0xff800000 + (0x7f << 2))
#define     AO_SEC_SD_CFG8                                     (0xff800000 + (0x88 << 2))
#define SEC_AO_SEC_SD_CFG8                                     (0xff800000 + (0x88 << 2))
#define   P_AO_SEC_SD_CFG8                                     (volatile uint32_t *)(0xff800000 + (0x88 << 2))
#define     AO_SEC_SD_CFG9                                     (0xff800000 + (0x89 << 2))
#define SEC_AO_SEC_SD_CFG9                                     (0xff800000 + (0x89 << 2))
#define   P_AO_SEC_SD_CFG9                                     (volatile uint32_t *)(0xff800000 + (0x89 << 2))
#define     AO_SEC_SD_CFG10                                    (0xff800000 + (0x8a << 2))
#define SEC_AO_SEC_SD_CFG10                                    (0xff800000 + (0x8a << 2))
#define   P_AO_SEC_SD_CFG10                                    (volatile uint32_t *)(0xff800000 + (0x8a << 2))
#define     AO_SEC_SD_CFG11                                    (0xff800000 + (0x8b << 2))
#define SEC_AO_SEC_SD_CFG11                                    (0xff800000 + (0x8b << 2))
#define   P_AO_SEC_SD_CFG11                                    (volatile uint32_t *)(0xff800000 + (0x8b << 2))
#define     AO_SEC_SD_CFG12                                    (0xff800000 + (0x8c << 2))
#define SEC_AO_SEC_SD_CFG12                                    (0xff800000 + (0x8c << 2))
#define   P_AO_SEC_SD_CFG12                                    (volatile uint32_t *)(0xff800000 + (0x8c << 2))
#define     AO_SEC_SD_CFG13                                    (0xff800000 + (0x8d << 2))
#define SEC_AO_SEC_SD_CFG13                                    (0xff800000 + (0x8d << 2))
#define   P_AO_SEC_SD_CFG13                                    (volatile uint32_t *)(0xff800000 + (0x8d << 2))
#define     AO_SEC_SD_CFG14                                    (0xff800000 + (0x8e << 2))
#define SEC_AO_SEC_SD_CFG14                                    (0xff800000 + (0x8e << 2))
#define   P_AO_SEC_SD_CFG14                                    (volatile uint32_t *)(0xff800000 + (0x8e << 2))
#define     AO_SEC_SD_CFG15                                    (0xff800000 + (0x8f << 2))
#define SEC_AO_SEC_SD_CFG15                                    (0xff800000 + (0x8f << 2))
#define   P_AO_SEC_SD_CFG15                                    (volatile uint32_t *)(0xff800000 + (0x8f << 2))
#define     AO_SEC_GP_CFG0                                     (0xff800000 + (0x90 << 2))
#define SEC_AO_SEC_GP_CFG0                                     (0xff800000 + (0x90 << 2))
#define   P_AO_SEC_GP_CFG0                                     (volatile uint32_t *)(0xff800000 + (0x90 << 2))
#define     AO_SEC_GP_CFG1                                     (0xff800000 + (0x91 << 2))
#define SEC_AO_SEC_GP_CFG1                                     (0xff800000 + (0x91 << 2))
#define   P_AO_SEC_GP_CFG1                                     (volatile uint32_t *)(0xff800000 + (0x91 << 2))
#define     AO_SEC_GP_CFG2                                     (0xff800000 + (0x92 << 2))
#define SEC_AO_SEC_GP_CFG2                                     (0xff800000 + (0x92 << 2))
#define   P_AO_SEC_GP_CFG2                                     (volatile uint32_t *)(0xff800000 + (0x92 << 2))
#define     AO_SEC_GP_CFG3                                     (0xff800000 + (0x93 << 2))
#define SEC_AO_SEC_GP_CFG3                                     (0xff800000 + (0x93 << 2))
#define   P_AO_SEC_GP_CFG3                                     (volatile uint32_t *)(0xff800000 + (0x93 << 2))
#define     AO_SEC_GP_CFG4                                     (0xff800000 + (0x94 << 2))
#define SEC_AO_SEC_GP_CFG4                                     (0xff800000 + (0x94 << 2))
#define   P_AO_SEC_GP_CFG4                                     (volatile uint32_t *)(0xff800000 + (0x94 << 2))
#define     AO_SEC_GP_CFG5                                     (0xff800000 + (0x95 << 2))
#define SEC_AO_SEC_GP_CFG5                                     (0xff800000 + (0x95 << 2))
#define   P_AO_SEC_GP_CFG5                                     (volatile uint32_t *)(0xff800000 + (0x95 << 2))
#define     AO_SEC_GP_CFG6                                     (0xff800000 + (0x96 << 2))
#define SEC_AO_SEC_GP_CFG6                                     (0xff800000 + (0x96 << 2))
#define   P_AO_SEC_GP_CFG6                                     (volatile uint32_t *)(0xff800000 + (0x96 << 2))
#define     AO_SEC_GP_CFG7                                     (0xff800000 + (0x97 << 2))
#define SEC_AO_SEC_GP_CFG7                                     (0xff800000 + (0x97 << 2))
#define   P_AO_SEC_GP_CFG7                                     (volatile uint32_t *)(0xff800000 + (0x97 << 2))
#define     AO_SEC_GP_CFG8                                     (0xff800000 + (0x98 << 2))
#define SEC_AO_SEC_GP_CFG8                                     (0xff800000 + (0x98 << 2))
#define   P_AO_SEC_GP_CFG8                                     (volatile uint32_t *)(0xff800000 + (0x98 << 2))
#define     AO_SEC_GP_CFG9                                     (0xff800000 + (0x99 << 2))
#define SEC_AO_SEC_GP_CFG9                                     (0xff800000 + (0x99 << 2))
#define   P_AO_SEC_GP_CFG9                                     (volatile uint32_t *)(0xff800000 + (0x99 << 2))
#define     AO_SEC_GP_CFG10                                    (0xff800000 + (0x9a << 2))
#define SEC_AO_SEC_GP_CFG10                                    (0xff800000 + (0x9a << 2))
#define   P_AO_SEC_GP_CFG10                                    (volatile uint32_t *)(0xff800000 + (0x9a << 2))
#define     AO_SEC_GP_CFG11                                    (0xff800000 + (0x9b << 2))
#define SEC_AO_SEC_GP_CFG11                                    (0xff800000 + (0x9b << 2))
#define   P_AO_SEC_GP_CFG11                                    (volatile uint32_t *)(0xff800000 + (0x9b << 2))
#define     AO_SEC_GP_CFG12                                    (0xff800000 + (0x9c << 2))
#define SEC_AO_SEC_GP_CFG12                                    (0xff800000 + (0x9c << 2))
#define   P_AO_SEC_GP_CFG12                                    (volatile uint32_t *)(0xff800000 + (0x9c << 2))
#define     AO_SEC_GP_CFG13                                    (0xff800000 + (0x9d << 2))
#define SEC_AO_SEC_GP_CFG13                                    (0xff800000 + (0x9d << 2))
#define   P_AO_SEC_GP_CFG13                                    (volatile uint32_t *)(0xff800000 + (0x9d << 2))
#define     AO_SEC_GP_CFG14                                    (0xff800000 + (0x9e << 2))
#define SEC_AO_SEC_GP_CFG14                                    (0xff800000 + (0x9e << 2))
#define   P_AO_SEC_GP_CFG14                                    (volatile uint32_t *)(0xff800000 + (0x9e << 2))
#define     AO_SEC_GP_CFG15                                    (0xff800000 + (0x9f << 2))
#define SEC_AO_SEC_GP_CFG15                                    (0xff800000 + (0x9f << 2))
#define   P_AO_SEC_GP_CFG15                                    (volatile uint32_t *)(0xff800000 + (0x9f << 2))
#define     AO_CECB_CLK_CNTL_REG0                              (0xff800000 + (0xa0 << 2))
#define SEC_AO_CECB_CLK_CNTL_REG0                              (0xff800000 + (0xa0 << 2))
#define   P_AO_CECB_CLK_CNTL_REG0                              (volatile uint32_t *)(0xff800000 + (0xa0 << 2))
#define     AO_CECB_CLK_CNTL_REG1                              (0xff800000 + (0xa1 << 2))
#define SEC_AO_CECB_CLK_CNTL_REG1                              (0xff800000 + (0xa1 << 2))
#define   P_AO_CECB_CLK_CNTL_REG1                              (volatile uint32_t *)(0xff800000 + (0xa1 << 2))
#define     AO_CECB_GEN_CNTL                                   (0xff800000 + (0xa2 << 2))
#define SEC_AO_CECB_GEN_CNTL                                   (0xff800000 + (0xa2 << 2))
#define   P_AO_CECB_GEN_CNTL                                   (volatile uint32_t *)(0xff800000 + (0xa2 << 2))
#define     AO_CECB_RW_REG                                     (0xff800000 + (0xa3 << 2))
#define SEC_AO_CECB_RW_REG                                     (0xff800000 + (0xa3 << 2))
#define   P_AO_CECB_RW_REG                                     (volatile uint32_t *)(0xff800000 + (0xa3 << 2))
#define     AO_CECB_INTR_MASKN                                 (0xff800000 + (0xa4 << 2))
#define SEC_AO_CECB_INTR_MASKN                                 (0xff800000 + (0xa4 << 2))
#define   P_AO_CECB_INTR_MASKN                                 (volatile uint32_t *)(0xff800000 + (0xa4 << 2))
#define     AO_CECB_INTR_CLR                                   (0xff800000 + (0xa5 << 2))
#define SEC_AO_CECB_INTR_CLR                                   (0xff800000 + (0xa5 << 2))
#define   P_AO_CECB_INTR_CLR                                   (volatile uint32_t *)(0xff800000 + (0xa5 << 2))
#define     AO_CECB_INTR_STAT                                  (0xff800000 + (0xa6 << 2))
#define SEC_AO_CECB_INTR_STAT                                  (0xff800000 + (0xa6 << 2))
#define   P_AO_CECB_INTR_STAT                                  (volatile uint32_t *)(0xff800000 + (0xa6 << 2))
//`define AO_RTC_ADDR0                    8'h70 //TODO: DEFINE IF WE'RE IMPLEMENTING AO_RTC
//`define AO_RTC_ADDR1                    8'h71 //TODO: DEFINE IF WE'RE IMPLEMENTING AO_RTC
//`define AO_RTC_ADDR2                    8'h72 //TODO: DEFINE IF WE'RE IMPLEMENTING AO_RTC
//`define AO_RTC_ADDR3                    8'h73 //TODO: DEFINE IF WE'RE IMPLEMENTING AO_RTC
//`define AO_RTC_ADDR4                    8'h74 //TODO: DEFINE IF WE'RE IMPLEMENTING AO_RTC
#define     AO_MSG_INDEX0                                      (0xff800000 + (0xb0 << 2))
#define SEC_AO_MSG_INDEX0                                      (0xff800000 + (0xb0 << 2))
#define   P_AO_MSG_INDEX0                                      (volatile uint32_t *)(0xff800000 + (0xb0 << 2))
#define     AO_MSG_INDEX1                                      (0xff800000 + (0xb1 << 2))
#define SEC_AO_MSG_INDEX1                                      (0xff800000 + (0xb1 << 2))
#define   P_AO_MSG_INDEX1                                      (volatile uint32_t *)(0xff800000 + (0xb1 << 2))
#define     AO_MSG_INDEX2                                      (0xff800000 + (0xb2 << 2))
#define SEC_AO_MSG_INDEX2                                      (0xff800000 + (0xb2 << 2))
#define   P_AO_MSG_INDEX2                                      (volatile uint32_t *)(0xff800000 + (0xb2 << 2))
#define     AO_MSG_INDEX3                                      (0xff800000 + (0xb3 << 2))
#define SEC_AO_MSG_INDEX3                                      (0xff800000 + (0xb3 << 2))
#define   P_AO_MSG_INDEX3                                      (volatile uint32_t *)(0xff800000 + (0xb3 << 2))
// ----------------------------
// PWM C-D
// ----------------------------
//#define AO_PWM_CD_REG_BASE 0x02
// APB4_DECODER_NON_SECURE_BASE     32'hFF802000
// APB4_DECODER_SECURE_BASE         32'hFF802000
#define     AO_PWM_PWM_C                                       (0xff802000 + (0x00 << 2))
#define SEC_AO_PWM_PWM_C                                       (0xff802000 + (0x00 << 2))
#define   P_AO_PWM_PWM_C                                       (volatile uint32_t *)(0xff802000 + (0x00 << 2))
#define     AO_PWM_PWM_D                                       (0xff802000 + (0x01 << 2))
#define SEC_AO_PWM_PWM_D                                       (0xff802000 + (0x01 << 2))
#define   P_AO_PWM_PWM_D                                       (volatile uint32_t *)(0xff802000 + (0x01 << 2))
#define     AO_PWM_MISC_REG_CD                                 (0xff802000 + (0x02 << 2))
#define SEC_AO_PWM_MISC_REG_CD                                 (0xff802000 + (0x02 << 2))
#define   P_AO_PWM_MISC_REG_CD                                 (volatile uint32_t *)(0xff802000 + (0x02 << 2))
#define     AO_PWM_DELTA_SIGMA_CD                              (0xff802000 + (0x03 << 2))
#define SEC_AO_PWM_DELTA_SIGMA_CD                              (0xff802000 + (0x03 << 2))
#define   P_AO_PWM_DELTA_SIGMA_CD                              (volatile uint32_t *)(0xff802000 + (0x03 << 2))
#define     AO_PWM_TIME_CD                                     (0xff802000 + (0x04 << 2))
#define SEC_AO_PWM_TIME_CD                                     (0xff802000 + (0x04 << 2))
#define   P_AO_PWM_TIME_CD                                     (volatile uint32_t *)(0xff802000 + (0x04 << 2))
#define     AO_PWM_C2                                          (0xff802000 + (0x05 << 2))
#define SEC_AO_PWM_C2                                          (0xff802000 + (0x05 << 2))
#define   P_AO_PWM_C2                                          (volatile uint32_t *)(0xff802000 + (0x05 << 2))
#define     AO_PWM_D2                                          (0xff802000 + (0x06 << 2))
#define SEC_AO_PWM_D2                                          (0xff802000 + (0x06 << 2))
#define   P_AO_PWM_D2                                          (volatile uint32_t *)(0xff802000 + (0x06 << 2))
#define     AO_PWM_BLINK_CD                                    (0xff802000 + (0x07 << 2))
#define SEC_AO_PWM_BLINK_CD                                    (0xff802000 + (0x07 << 2))
#define   P_AO_PWM_BLINK_CD                                    (volatile uint32_t *)(0xff802000 + (0x07 << 2))
// ----------------------------
// UART
// ----------------------------
//#define AO_UART_REG_BASE 0x03
// APB4_DECODER_NON_SECURE_BASE     32'hFF803000
// APB4_DECODER_SECURE_BASE         32'hFF803000
#define     AO_UART_WFIFO                                      (0xff803000 + (0x00 << 2))
#define SEC_AO_UART_WFIFO                                      (0xff803000 + (0x00 << 2))
#define   P_AO_UART_WFIFO                                      (volatile uint32_t *)(0xff803000 + (0x00 << 2))
#define     AO_UART_RFIFO                                      (0xff803000 + (0x01 << 2))
#define SEC_AO_UART_RFIFO                                      (0xff803000 + (0x01 << 2))
#define   P_AO_UART_RFIFO                                      (volatile uint32_t *)(0xff803000 + (0x01 << 2))
#define     AO_UART_CONTROL                                    (0xff803000 + (0x02 << 2))
#define SEC_AO_UART_CONTROL                                    (0xff803000 + (0x02 << 2))
#define   P_AO_UART_CONTROL                                    (volatile uint32_t *)(0xff803000 + (0x02 << 2))
#define     AO_UART_STATUS                                     (0xff803000 + (0x03 << 2))
#define SEC_AO_UART_STATUS                                     (0xff803000 + (0x03 << 2))
#define   P_AO_UART_STATUS                                     (volatile uint32_t *)(0xff803000 + (0x03 << 2))
#define     AO_UART_MISC                                       (0xff803000 + (0x04 << 2))
#define SEC_AO_UART_MISC                                       (0xff803000 + (0x04 << 2))
#define   P_AO_UART_MISC                                       (volatile uint32_t *)(0xff803000 + (0x04 << 2))
#define     AO_UART_REG5                                       (0xff803000 + (0x05 << 2))
#define SEC_AO_UART_REG5                                       (0xff803000 + (0x05 << 2))
#define   P_AO_UART_REG5                                       (volatile uint32_t *)(0xff803000 + (0x05 << 2))
// ----------------------------
// UART2
// ----------------------------
//#define AO_UART2_REG_BASE 0x04
// APB4_DECODER_NON_SECURE_BASE     32'hFF804000
// APB4_DECODER_SECURE_BASE         32'hFF804000
#define     AO_UART2_WFIFO                                     (0xff804000 + (0x00 << 2))
#define SEC_AO_UART2_WFIFO                                     (0xff804000 + (0x00 << 2))
#define   P_AO_UART2_WFIFO                                     (volatile uint32_t *)(0xff804000 + (0x00 << 2))
#define     AO_UART2_RFIFO                                     (0xff804000 + (0x01 << 2))
#define SEC_AO_UART2_RFIFO                                     (0xff804000 + (0x01 << 2))
#define   P_AO_UART2_RFIFO                                     (volatile uint32_t *)(0xff804000 + (0x01 << 2))
#define     AO_UART2_CONTROL                                   (0xff804000 + (0x02 << 2))
#define SEC_AO_UART2_CONTROL                                   (0xff804000 + (0x02 << 2))
#define   P_AO_UART2_CONTROL                                   (volatile uint32_t *)(0xff804000 + (0x02 << 2))
#define     AO_UART2_STATUS                                    (0xff804000 + (0x03 << 2))
#define SEC_AO_UART2_STATUS                                    (0xff804000 + (0x03 << 2))
#define   P_AO_UART2_STATUS                                    (volatile uint32_t *)(0xff804000 + (0x03 << 2))
#define     AO_UART2_MISC                                      (0xff804000 + (0x04 << 2))
#define SEC_AO_UART2_MISC                                      (0xff804000 + (0x04 << 2))
#define   P_AO_UART2_MISC                                      (volatile uint32_t *)(0xff804000 + (0x04 << 2))
#define     AO_UART2_REG5                                      (0xff804000 + (0x05 << 2))
#define SEC_AO_UART2_REG5                                      (0xff804000 + (0x05 << 2))
#define   P_AO_UART2_REG5                                      (volatile uint32_t *)(0xff804000 + (0x05 << 2))
// ----------------------------
// I2C Master (8)
// ----------------------------
//#define AO_I2C_M_REG_BASE 0x05
// APB4_DECODER_NON_SECURE_BASE     32'hFF805000
// APB4_DECODER_SECURE_BASE         32'hFF805000
#define     AO_I2C_M_0_CONTROL_REG                             (0xff805000 + (0x00 << 2))
#define SEC_AO_I2C_M_0_CONTROL_REG                             (0xff805000 + (0x00 << 2))
#define   P_AO_I2C_M_0_CONTROL_REG                             (volatile uint32_t *)(0xff805000 + (0x00 << 2))
#define     AO_I2C_M_0_SLAVE_ADDR                              (0xff805000 + (0x01 << 2))
#define SEC_AO_I2C_M_0_SLAVE_ADDR                              (0xff805000 + (0x01 << 2))
#define   P_AO_I2C_M_0_SLAVE_ADDR                              (volatile uint32_t *)(0xff805000 + (0x01 << 2))
#define     AO_I2C_M_0_TOKEN_LIST0                             (0xff805000 + (0x02 << 2))
#define SEC_AO_I2C_M_0_TOKEN_LIST0                             (0xff805000 + (0x02 << 2))
#define   P_AO_I2C_M_0_TOKEN_LIST0                             (volatile uint32_t *)(0xff805000 + (0x02 << 2))
#define     AO_I2C_M_0_TOKEN_LIST1                             (0xff805000 + (0x03 << 2))
#define SEC_AO_I2C_M_0_TOKEN_LIST1                             (0xff805000 + (0x03 << 2))
#define   P_AO_I2C_M_0_TOKEN_LIST1                             (volatile uint32_t *)(0xff805000 + (0x03 << 2))
#define     AO_I2C_M_0_WDATA_REG0                              (0xff805000 + (0x04 << 2))
#define SEC_AO_I2C_M_0_WDATA_REG0                              (0xff805000 + (0x04 << 2))
#define   P_AO_I2C_M_0_WDATA_REG0                              (volatile uint32_t *)(0xff805000 + (0x04 << 2))
#define     AO_I2C_M_0_WDATA_REG1                              (0xff805000 + (0x05 << 2))
#define SEC_AO_I2C_M_0_WDATA_REG1                              (0xff805000 + (0x05 << 2))
#define   P_AO_I2C_M_0_WDATA_REG1                              (volatile uint32_t *)(0xff805000 + (0x05 << 2))
#define     AO_I2C_M_0_RDATA_REG0                              (0xff805000 + (0x06 << 2))
#define SEC_AO_I2C_M_0_RDATA_REG0                              (0xff805000 + (0x06 << 2))
#define   P_AO_I2C_M_0_RDATA_REG0                              (volatile uint32_t *)(0xff805000 + (0x06 << 2))
#define     AO_I2C_M_0_RDATA_REG1                              (0xff805000 + (0x07 << 2))
#define SEC_AO_I2C_M_0_RDATA_REG1                              (0xff805000 + (0x07 << 2))
#define   P_AO_I2C_M_0_RDATA_REG1                              (volatile uint32_t *)(0xff805000 + (0x07 << 2))
// ----------------------------
// I2C Slave (3)
// ----------------------------
//#define AO_I2C_S_REG_BASE 0x06
// APB4_DECODER_NON_SECURE_BASE     32'hFF806000
// APB4_DECODER_SECURE_BASE         32'hFF806000
#define     AO_I2C_S_CONTROL_REG                               (0xff806000 + (0x00 << 2))
#define SEC_AO_I2C_S_CONTROL_REG                               (0xff806000 + (0x00 << 2))
#define   P_AO_I2C_S_CONTROL_REG                               (volatile uint32_t *)(0xff806000 + (0x00 << 2))
#define     AO_I2C_S_SEND_REG                                  (0xff806000 + (0x01 << 2))
#define SEC_AO_I2C_S_SEND_REG                                  (0xff806000 + (0x01 << 2))
#define   P_AO_I2C_S_SEND_REG                                  (volatile uint32_t *)(0xff806000 + (0x01 << 2))
#define     AO_I2C_S_RECV_REG                                  (0xff806000 + (0x02 << 2))
#define SEC_AO_I2C_S_RECV_REG                                  (0xff806000 + (0x02 << 2))
#define   P_AO_I2C_S_RECV_REG                                  (volatile uint32_t *)(0xff806000 + (0x02 << 2))
#define     AO_I2C_S_CNTL1_REG                                 (0xff806000 + (0x03 << 2))
#define SEC_AO_I2C_S_CNTL1_REG                                 (0xff806000 + (0x03 << 2))
#define   P_AO_I2C_S_CNTL1_REG                                 (volatile uint32_t *)(0xff806000 + (0x03 << 2))
// ----------------------------
// PWM A-B
// ----------------------------
//#define AO_PWM_AB_REG_BASE 0x07
// APB4_DECODER_NON_SECURE_BASE     32'hFF807000
// APB4_DECODER_SECURE_BASE         32'hFF807000
#define     AO_PWM_PWM_A                                       (0xff807000 + (0x00 << 2))
#define SEC_AO_PWM_PWM_A                                       (0xff807000 + (0x00 << 2))
#define   P_AO_PWM_PWM_A                                       (volatile uint32_t *)(0xff807000 + (0x00 << 2))
#define     AO_PWM_PWM_B                                       (0xff807000 + (0x01 << 2))
#define SEC_AO_PWM_PWM_B                                       (0xff807000 + (0x01 << 2))
#define   P_AO_PWM_PWM_B                                       (volatile uint32_t *)(0xff807000 + (0x01 << 2))
#define     AO_PWM_MISC_REG_AB                                 (0xff807000 + (0x02 << 2))
#define SEC_AO_PWM_MISC_REG_AB                                 (0xff807000 + (0x02 << 2))
#define   P_AO_PWM_MISC_REG_AB                                 (volatile uint32_t *)(0xff807000 + (0x02 << 2))
#define     AO_PWM_DELTA_SIGMA_AB                              (0xff807000 + (0x03 << 2))
#define SEC_AO_PWM_DELTA_SIGMA_AB                              (0xff807000 + (0x03 << 2))
#define   P_AO_PWM_DELTA_SIGMA_AB                              (volatile uint32_t *)(0xff807000 + (0x03 << 2))
#define     AO_PWM_TIME_AB                                     (0xff807000 + (0x04 << 2))
#define SEC_AO_PWM_TIME_AB                                     (0xff807000 + (0x04 << 2))
#define   P_AO_PWM_TIME_AB                                     (volatile uint32_t *)(0xff807000 + (0x04 << 2))
#define     AO_PWM_A2                                          (0xff807000 + (0x05 << 2))
#define SEC_AO_PWM_A2                                          (0xff807000 + (0x05 << 2))
#define   P_AO_PWM_A2                                          (volatile uint32_t *)(0xff807000 + (0x05 << 2))
#define     AO_PWM_B2                                          (0xff807000 + (0x06 << 2))
#define SEC_AO_PWM_B2                                          (0xff807000 + (0x06 << 2))
#define   P_AO_PWM_B2                                          (volatile uint32_t *)(0xff807000 + (0x06 << 2))
#define     AO_PWM_BLINK_AB                                    (0xff807000 + (0x07 << 2))
#define SEC_AO_PWM_BLINK_AB                                    (0xff807000 + (0x07 << 2))
#define   P_AO_PWM_BLINK_AB                                    (volatile uint32_t *)(0xff807000 + (0x07 << 2))
// ----------------------------
// Multiformat IR Remote
// ----------------------------
//#define AO_MF_IR_DEC_REG_BASE 0x08
// APB4_DECODER_NON_SECURE_BASE     32'hFF808000
// APB4_DECODER_SECURE_BASE         32'hFF808000
#define     AO_IR_DEC_LDR_ACTIVE                               (0xff808000 + (0x00 << 2))
#define SEC_AO_IR_DEC_LDR_ACTIVE                               (0xff808000 + (0x00 << 2))
#define   P_AO_IR_DEC_LDR_ACTIVE                               (volatile uint32_t *)(0xff808000 + (0x00 << 2))
#define     AO_IR_DEC_LDR_IDLE                                 (0xff808000 + (0x01 << 2))
#define SEC_AO_IR_DEC_LDR_IDLE                                 (0xff808000 + (0x01 << 2))
#define   P_AO_IR_DEC_LDR_IDLE                                 (volatile uint32_t *)(0xff808000 + (0x01 << 2))
#define     AO_IR_DEC_LDR_REPEAT                               (0xff808000 + (0x02 << 2))
#define SEC_AO_IR_DEC_LDR_REPEAT                               (0xff808000 + (0x02 << 2))
#define   P_AO_IR_DEC_LDR_REPEAT                               (volatile uint32_t *)(0xff808000 + (0x02 << 2))
#define     AO_IR_DEC_BIT_0                                    (0xff808000 + (0x03 << 2))
#define SEC_AO_IR_DEC_BIT_0                                    (0xff808000 + (0x03 << 2))
#define   P_AO_IR_DEC_BIT_0                                    (volatile uint32_t *)(0xff808000 + (0x03 << 2))
#define     AO_IR_DEC_REG0                                     (0xff808000 + (0x04 << 2))
#define SEC_AO_IR_DEC_REG0                                     (0xff808000 + (0x04 << 2))
#define   P_AO_IR_DEC_REG0                                     (volatile uint32_t *)(0xff808000 + (0x04 << 2))
#define     AO_IR_DEC_FRAME                                    (0xff808000 + (0x05 << 2))
#define SEC_AO_IR_DEC_FRAME                                    (0xff808000 + (0x05 << 2))
#define   P_AO_IR_DEC_FRAME                                    (volatile uint32_t *)(0xff808000 + (0x05 << 2))
#define     AO_IR_DEC_STATUS                                   (0xff808000 + (0x06 << 2))
#define SEC_AO_IR_DEC_STATUS                                   (0xff808000 + (0x06 << 2))
#define   P_AO_IR_DEC_STATUS                                   (volatile uint32_t *)(0xff808000 + (0x06 << 2))
#define     AO_IR_DEC_REG1                                     (0xff808000 + (0x07 << 2))
#define SEC_AO_IR_DEC_REG1                                     (0xff808000 + (0x07 << 2))
#define   P_AO_IR_DEC_REG1                                     (volatile uint32_t *)(0xff808000 + (0x07 << 2))
#define     AO_MF_IR_DEC_LDR_ACTIVE                            (0xff808000 + (0x10 << 2))
#define SEC_AO_MF_IR_DEC_LDR_ACTIVE                            (0xff808000 + (0x10 << 2))
#define   P_AO_MF_IR_DEC_LDR_ACTIVE                            (volatile uint32_t *)(0xff808000 + (0x10 << 2))
#define     AO_MF_IR_DEC_LDR_IDLE                              (0xff808000 + (0x11 << 2))
#define SEC_AO_MF_IR_DEC_LDR_IDLE                              (0xff808000 + (0x11 << 2))
#define   P_AO_MF_IR_DEC_LDR_IDLE                              (volatile uint32_t *)(0xff808000 + (0x11 << 2))
#define     AO_MF_IR_DEC_LDR_REPEAT                            (0xff808000 + (0x12 << 2))
#define SEC_AO_MF_IR_DEC_LDR_REPEAT                            (0xff808000 + (0x12 << 2))
#define   P_AO_MF_IR_DEC_LDR_REPEAT                            (volatile uint32_t *)(0xff808000 + (0x12 << 2))
#define     AO_MF_IR_DEC_BIT_0                                 (0xff808000 + (0x13 << 2))
#define SEC_AO_MF_IR_DEC_BIT_0                                 (0xff808000 + (0x13 << 2))
#define   P_AO_MF_IR_DEC_BIT_0                                 (volatile uint32_t *)(0xff808000 + (0x13 << 2))
#define     AO_MF_IR_DEC_REG0                                  (0xff808000 + (0x14 << 2))
#define SEC_AO_MF_IR_DEC_REG0                                  (0xff808000 + (0x14 << 2))
#define   P_AO_MF_IR_DEC_REG0                                  (volatile uint32_t *)(0xff808000 + (0x14 << 2))
#define     AO_MF_IR_DEC_FRAME                                 (0xff808000 + (0x15 << 2))
#define SEC_AO_MF_IR_DEC_FRAME                                 (0xff808000 + (0x15 << 2))
#define   P_AO_MF_IR_DEC_FRAME                                 (volatile uint32_t *)(0xff808000 + (0x15 << 2))
#define     AO_MF_IR_DEC_STATUS                                (0xff808000 + (0x16 << 2))
#define SEC_AO_MF_IR_DEC_STATUS                                (0xff808000 + (0x16 << 2))
#define   P_AO_MF_IR_DEC_STATUS                                (volatile uint32_t *)(0xff808000 + (0x16 << 2))
#define     AO_MF_IR_DEC_REG1                                  (0xff808000 + (0x17 << 2))
#define SEC_AO_MF_IR_DEC_REG1                                  (0xff808000 + (0x17 << 2))
#define   P_AO_MF_IR_DEC_REG1                                  (volatile uint32_t *)(0xff808000 + (0x17 << 2))
#define     AO_MF_IR_DEC_REG2                                  (0xff808000 + (0x18 << 2))
#define SEC_AO_MF_IR_DEC_REG2                                  (0xff808000 + (0x18 << 2))
#define   P_AO_MF_IR_DEC_REG2                                  (volatile uint32_t *)(0xff808000 + (0x18 << 2))
#define     AO_MF_IR_DEC_DURATN2                               (0xff808000 + (0x19 << 2))
#define SEC_AO_MF_IR_DEC_DURATN2                               (0xff808000 + (0x19 << 2))
#define   P_AO_MF_IR_DEC_DURATN2                               (volatile uint32_t *)(0xff808000 + (0x19 << 2))
#define     AO_MF_IR_DEC_DURATN3                               (0xff808000 + (0x1a << 2))
#define SEC_AO_MF_IR_DEC_DURATN3                               (0xff808000 + (0x1a << 2))
#define   P_AO_MF_IR_DEC_DURATN3                               (volatile uint32_t *)(0xff808000 + (0x1a << 2))
#define     AO_MF_IR_DEC_FRAME1                                (0xff808000 + (0x1b << 2))
#define SEC_AO_MF_IR_DEC_FRAME1                                (0xff808000 + (0x1b << 2))
#define   P_AO_MF_IR_DEC_FRAME1                                (volatile uint32_t *)(0xff808000 + (0x1b << 2))
#define     AO_MF_IR_DEC_STATUS1                               (0xff808000 + (0x1c << 2))
#define SEC_AO_MF_IR_DEC_STATUS1                               (0xff808000 + (0x1c << 2))
#define   P_AO_MF_IR_DEC_STATUS1                               (volatile uint32_t *)(0xff808000 + (0x1c << 2))
#define     AO_MF_IR_DEC_STATUS2                               (0xff808000 + (0x1d << 2))
#define SEC_AO_MF_IR_DEC_STATUS2                               (0xff808000 + (0x1d << 2))
#define   P_AO_MF_IR_DEC_STATUS2                               (volatile uint32_t *)(0xff808000 + (0x1d << 2))
#define     AO_MF_IR_DEC_REG3                                  (0xff808000 + (0x1e << 2))
#define SEC_AO_MF_IR_DEC_REG3                                  (0xff808000 + (0x1e << 2))
#define   P_AO_MF_IR_DEC_REG3                                  (volatile uint32_t *)(0xff808000 + (0x1e << 2))
#define     AO_MF_IR_DEC_FRAME_RSV0                            (0xff808000 + (0x1f << 2))
#define SEC_AO_MF_IR_DEC_FRAME_RSV0                            (0xff808000 + (0x1f << 2))
#define   P_AO_MF_IR_DEC_FRAME_RSV0                            (volatile uint32_t *)(0xff808000 + (0x1f << 2))
#define     AO_MF_IR_DEC_FRAME_RSV1                            (0xff808000 + (0x20 << 2))
#define SEC_AO_MF_IR_DEC_FRAME_RSV1                            (0xff808000 + (0x20 << 2))
#define   P_AO_MF_IR_DEC_FRAME_RSV1                            (volatile uint32_t *)(0xff808000 + (0x20 << 2))
#define     AO_MF_IR_DEC_FILTE                                 (0xff808000 + (0x21 << 2))
#define SEC_AO_MF_IR_DEC_FILTE                                 (0xff808000 + (0x21 << 2))
#define   P_AO_MF_IR_DEC_FILTE                                 (volatile uint32_t *)(0xff808000 + (0x21 << 2))
#define     AO_MF_IR_DEC_IRQ_CTL                               (0xff808000 + (0x22 << 2))
#define SEC_AO_MF_IR_DEC_IRQ_CTL                               (0xff808000 + (0x22 << 2))
#define   P_AO_MF_IR_DEC_IRQ_CTL                               (volatile uint32_t *)(0xff808000 + (0x22 << 2))
#define     AO_MF_IR_DEC_FIFO_CTL                              (0xff808000 + (0x23 << 2))
#define SEC_AO_MF_IR_DEC_FIFO_CTL                              (0xff808000 + (0x23 << 2))
#define   P_AO_MF_IR_DEC_FIFO_CTL                              (volatile uint32_t *)(0xff808000 + (0x23 << 2))
#define     AO_MF_IR_DEC_WIDTH_NEW                             (0xff808000 + (0x24 << 2))
#define SEC_AO_MF_IR_DEC_WIDTH_NEW                             (0xff808000 + (0x24 << 2))
#define   P_AO_MF_IR_DEC_WIDTH_NEW                             (volatile uint32_t *)(0xff808000 + (0x24 << 2))
#define     AO_MF_IR_DEC_REPEAT_DET                            (0xff808000 + (0x25 << 2))
#define SEC_AO_MF_IR_DEC_REPEAT_DET                            (0xff808000 + (0x25 << 2))
#define   P_AO_MF_IR_DEC_REPEAT_DET                            (volatile uint32_t *)(0xff808000 + (0x25 << 2))
// ---------------------------
// SAR ADC
// ---------------------------
//#define AO_SAR_ADC_REG_BASE 0x09
// APB4_DECODER_NON_SECURE_BASE     32'hFF809000
// APB4_DECODER_SECURE_BASE         32'hFF809000
#define     AO_SAR_ADC_REG0                                    (0xff809000 + (0x00 << 2))
#define SEC_AO_SAR_ADC_REG0                                    (0xff809000 + (0x00 << 2))
#define   P_AO_SAR_ADC_REG0                                    (volatile uint32_t *)(0xff809000 + (0x00 << 2))
#define     AO_SAR_ADC_CHAN_LIST                               (0xff809000 + (0x01 << 2))
#define SEC_AO_SAR_ADC_CHAN_LIST                               (0xff809000 + (0x01 << 2))
#define   P_AO_SAR_ADC_CHAN_LIST                               (volatile uint32_t *)(0xff809000 + (0x01 << 2))
#define     AO_SAR_ADC_AVG_CNTL                                (0xff809000 + (0x02 << 2))
#define SEC_AO_SAR_ADC_AVG_CNTL                                (0xff809000 + (0x02 << 2))
#define   P_AO_SAR_ADC_AVG_CNTL                                (volatile uint32_t *)(0xff809000 + (0x02 << 2))
#define     AO_SAR_ADC_REG3                                    (0xff809000 + (0x03 << 2))
#define SEC_AO_SAR_ADC_REG3                                    (0xff809000 + (0x03 << 2))
#define   P_AO_SAR_ADC_REG3                                    (volatile uint32_t *)(0xff809000 + (0x03 << 2))
#define     AO_SAR_ADC_DELAY                                   (0xff809000 + (0x04 << 2))
#define SEC_AO_SAR_ADC_DELAY                                   (0xff809000 + (0x04 << 2))
#define   P_AO_SAR_ADC_DELAY                                   (volatile uint32_t *)(0xff809000 + (0x04 << 2))
#define     AO_SAR_ADC_LAST_RD                                 (0xff809000 + (0x05 << 2))
#define SEC_AO_SAR_ADC_LAST_RD                                 (0xff809000 + (0x05 << 2))
#define   P_AO_SAR_ADC_LAST_RD                                 (volatile uint32_t *)(0xff809000 + (0x05 << 2))
#define     AO_SAR_ADC_FIFO_RD                                 (0xff809000 + (0x06 << 2))
#define SEC_AO_SAR_ADC_FIFO_RD                                 (0xff809000 + (0x06 << 2))
#define   P_AO_SAR_ADC_FIFO_RD                                 (volatile uint32_t *)(0xff809000 + (0x06 << 2))
#define     AO_SAR_ADC_AUX_SW                                  (0xff809000 + (0x07 << 2))
#define SEC_AO_SAR_ADC_AUX_SW                                  (0xff809000 + (0x07 << 2))
#define   P_AO_SAR_ADC_AUX_SW                                  (volatile uint32_t *)(0xff809000 + (0x07 << 2))
#define     AO_SAR_ADC_CHAN_10_SW                              (0xff809000 + (0x08 << 2))
#define SEC_AO_SAR_ADC_CHAN_10_SW                              (0xff809000 + (0x08 << 2))
#define   P_AO_SAR_ADC_CHAN_10_SW                              (volatile uint32_t *)(0xff809000 + (0x08 << 2))
#define     AO_SAR_ADC_DETECT_IDLE_SW                          (0xff809000 + (0x09 << 2))
#define SEC_AO_SAR_ADC_DETECT_IDLE_SW                          (0xff809000 + (0x09 << 2))
#define   P_AO_SAR_ADC_DETECT_IDLE_SW                          (volatile uint32_t *)(0xff809000 + (0x09 << 2))
#define     AO_SAR_ADC_DELTA_10                                (0xff809000 + (0x0a << 2))
#define SEC_AO_SAR_ADC_DELTA_10                                (0xff809000 + (0x0a << 2))
#define   P_AO_SAR_ADC_DELTA_10                                (volatile uint32_t *)(0xff809000 + (0x0a << 2))
#define     AO_SAR_ADC_REG11                                   (0xff809000 + (0x0b << 2))
#define SEC_AO_SAR_ADC_REG11                                   (0xff809000 + (0x0b << 2))
#define   P_AO_SAR_ADC_REG11                                   (volatile uint32_t *)(0xff809000 + (0x0b << 2))
#define     AO_SAR_ADC_REG12                                   (0xff809000 + (0x0c << 2))
#define SEC_AO_SAR_ADC_REG12                                   (0xff809000 + (0x0c << 2))
#define   P_AO_SAR_ADC_REG12                                   (volatile uint32_t *)(0xff809000 + (0x0c << 2))
#define     AO_SAR_ADC_REG13                                   (0xff809000 + (0x0d << 2))
#define SEC_AO_SAR_ADC_REG13                                   (0xff809000 + (0x0d << 2))
#define   P_AO_SAR_ADC_REG13                                   (volatile uint32_t *)(0xff809000 + (0x0d << 2))
// ---------------------------
// RTC (4)
// ---------------------------
// Moved to the secure APB3 bus
// `define AO_RTC_ADDR0                8'hd0
// `define AO_RTC_ADDR1                8'hd1
// `define AO_RTC_ADDR2                8'hd2
// `define AO_RTC_ADDR3                8'hd3
// `define AO_RTC_ADDR4                8'hd4
//
// Closing file:  ./ao_rti_reg.h
//

#endif // SECURE_APB_H

#define NO_ENCT
#ifdef NO_ENCT
#undef ENCT_VFIFO2VD_CTL
#undef ENCT_VFIFO2VD_PIXEL_START
#undef ENCT_VFIFO2VD_PIXEL_END
#undef ENCT_VFIFO2VD_LINE_TOP_START
#undef ENCT_VFIFO2VD_LINE_TOP_END
#undef ENCT_VFIFO2VD_LINE_BOT_START
#undef ENCT_VFIFO2VD_LINE_BOT_END
#undef ENCT_VFIFO2VD_CTL2
#undef ENCT_TST_EN
#undef ENCT_TST_MDSEL
#undef ENCT_TST_Y
#undef ENCT_TST_CB
#undef ENCT_TST_CR
#undef ENCT_TST_CLRBAR_STRT
#undef ENCT_TST_CLRBAR_WIDTH
#undef ENCT_TST_VDCNT_STSET
#undef ENCT_SYNC_LINE_LENGTH
#undef ENCT_SYNC_PIXEL_EN
#undef ENCT_SYNC_TO_LINE_EN
#undef ENCT_SYNC_TO_PIXEL
#undef ENCT_VIDEO_EN
#undef ENCT_VIDEO_Y_SCL
#undef ENCT_VIDEO_PB_SCL
#undef ENCT_VIDEO_PR_SCL
#undef ENCT_VIDEO_Y_OFFST
#undef ENCT_VIDEO_PB_OFFST
#undef ENCT_VIDEO_PR_OFFST
#undef ENCT_VIDEO_MODE
#undef ENCT_VIDEO_MODE_ADV
#undef ENCT_DBG_PX_RST
#undef ENCT_DBG_LN_RST
#undef ENCT_DBG_PX_INT
#undef ENCT_DBG_LN_INT
#undef ENCT_VIDEO_YFP1_HTIME
#undef ENCT_VIDEO_YFP2_HTIME
#undef ENCT_VIDEO_YC_DLY
#undef ENCT_VIDEO_MAX_PXCNT
#undef ENCT_VIDEO_HAVON_END
#undef ENCT_VIDEO_HAVON_BEGIN
#undef ENCT_VIDEO_VAVON_ELINE
#undef ENCT_VIDEO_VAVON_BLINE
#undef ENCT_VIDEO_HSO_BEGIN
#undef ENCT_VIDEO_HSO_END
#undef ENCT_VIDEO_VSO_BEGIN
#undef ENCT_VIDEO_VSO_END
#undef ENCT_VIDEO_VSO_BLINE
#undef ENCT_VIDEO_VSO_ELINE
#undef ENCT_VIDEO_MAX_LNCNT
#undef ENCT_VIDEO_BLANKY_VAL
#undef ENCT_VIDEO_BLANKPB_VAL
#undef ENCT_VIDEO_BLANKPR_VAL
#undef ENCT_VIDEO_HOFFST
#undef ENCT_VIDEO_VOFFST
#undef ENCT_VIDEO_RGB_CTRL
#undef ENCT_VIDEO_FILT_CTRL
#undef ENCT_VIDEO_OFLD_VPEQ_OFST
#undef ENCT_VIDEO_OFLD_VOAV_OFST
#undef ENCT_VIDEO_MATRIX_CB
#undef ENCT_VIDEO_MATRIX_CR
#undef ENCT_VIDEO_RGBIN_CTRL
#undef ENCT_MAX_LINE_SWITCH_POINT
#undef ENCT_DACSEL_0
#undef ENCT_DACSEL_1
// re-define
#define ENCT_VFIFO2VD_CTL ENCL_VFIFO2VD_CTL
#define ENCT_VFIFO2VD_PIXEL_START ENCL_VFIFO2VD_PIXEL_START
#define ENCT_VFIFO2VD_PIXEL_END ENCL_VFIFO2VD_PIXEL_END
#define ENCT_VFIFO2VD_LINE_TOP_START ENCL_VFIFO2VD_LINE_TOP_START
#define ENCT_VFIFO2VD_LINE_TOP_END ENCL_VFIFO2VD_LINE_TOP_END
#define ENCT_VFIFO2VD_LINE_BOT_START ENCL_VFIFO2VD_LINE_BOT_START
#define ENCT_VFIFO2VD_LINE_BOT_END ENCL_VFIFO2VD_LINE_BOT_END
#define ENCT_VFIFO2VD_CTL2 ENCL_VFIFO2VD_CTL2
#define ENCT_TST_EN ENCL_TST_EN
#define ENCT_TST_MDSEL ENCL_TST_MDSEL
#define ENCT_TST_Y ENCL_TST_Y
#define ENCT_TST_CB ENCL_TST_CB
#define ENCT_TST_CR ENCL_TST_CR
#define ENCT_TST_CLRBAR_STRT ENCL_TST_CLRBAR_STRT
#define ENCT_TST_CLRBAR_WIDTH ENCL_TST_CLRBAR_WIDTH
#define ENCT_TST_VDCNT_STSET ENCL_TST_VDCNT_STSET
#define ENCT_SYNC_LINE_LENGTH ENCL_SYNC_LINE_LENGTH
#define ENCT_SYNC_PIXEL_EN ENCL_SYNC_PIXEL_EN
#define ENCT_SYNC_TO_LINE_EN ENCL_SYNC_TO_LINE_EN
#define ENCT_SYNC_TO_PIXEL ENCL_SYNC_TO_PIXEL
#define ENCT_VIDEO_EN ENCL_VIDEO_EN
#define ENCT_VIDEO_Y_SCL ENCL_VIDEO_Y_SCL
#define ENCT_VIDEO_PB_SCL ENCL_VIDEO_PB_SCL
#define ENCT_VIDEO_PR_SCL ENCL_VIDEO_PR_SCL
#define ENCT_VIDEO_Y_OFFST ENCL_VIDEO_Y_OFFST
#define ENCT_VIDEO_PB_OFFST ENCL_VIDEO_PB_OFFST
#define ENCT_VIDEO_PR_OFFST ENCL_VIDEO_PR_OFFST
#define ENCT_VIDEO_MODE ENCL_VIDEO_MODE
#define ENCT_VIDEO_MODE_ADV ENCL_VIDEO_MODE_ADV
#define ENCT_DBG_PX_RST ENCL_DBG_PX_RST
#define ENCT_DBG_LN_RST ENCL_DBG_LN_RST
#define ENCT_DBG_PX_INT ENCL_DBG_PX_INT
#define ENCT_DBG_LN_INT ENCL_DBG_LN_INT
#define ENCT_VIDEO_YFP1_HTIME ENCL_VIDEO_YFP1_HTIME
#define ENCT_VIDEO_YFP2_HTIME ENCL_VIDEO_YFP2_HTIME
#define ENCT_VIDEO_YC_DLY ENCL_VIDEO_YC_DLY
#define ENCT_VIDEO_MAX_PXCNT ENCL_VIDEO_MAX_PXCNT
#define ENCT_VIDEO_HAVON_END ENCL_VIDEO_HAVON_END
#define ENCT_VIDEO_HAVON_BEGIN ENCL_VIDEO_HAVON_BEGIN
#define ENCT_VIDEO_VAVON_ELINE ENCL_VIDEO_VAVON_ELINE
#define ENCT_VIDEO_VAVON_BLINE ENCL_VIDEO_VAVON_BLINE
#define ENCT_VIDEO_HSO_BEGIN ENCL_VIDEO_HSO_BEGIN
#define ENCT_VIDEO_HSO_END ENCL_VIDEO_HSO_END
#define ENCT_VIDEO_VSO_BEGIN ENCL_VIDEO_VSO_BEGIN
#define ENCT_VIDEO_VSO_END ENCL_VIDEO_VSO_END
#define ENCT_VIDEO_VSO_BLINE ENCL_VIDEO_VSO_BLINE
#define ENCT_VIDEO_VSO_ELINE ENCL_VIDEO_VSO_ELINE
#define ENCT_VIDEO_MAX_LNCNT ENCL_VIDEO_MAX_LNCNT
#define ENCT_VIDEO_BLANKY_VAL ENCL_VIDEO_BLANKY_VAL
#define ENCT_VIDEO_BLANKPB_VAL ENCL_VIDEO_BLANKPB_VAL
#define ENCT_VIDEO_BLANKPR_VAL ENCL_VIDEO_BLANKPR_VAL
#define ENCT_VIDEO_HOFFST ENCL_VIDEO_HOFFST
#define ENCT_VIDEO_VOFFST ENCL_VIDEO_VOFFST
#define ENCT_VIDEO_RGB_CTRL ENCL_VIDEO_RGB_CTRL
#define ENCT_VIDEO_FILT_CTRL ENCL_VIDEO_FILT_CTRL
#define ENCT_VIDEO_OFLD_VPEQ_OFST ENCL_VIDEO_OFLD_VPEQ_OFST
#define ENCT_VIDEO_OFLD_VOAV_OFST ENCL_VIDEO_OFLD_VOAV_OFST
#define ENCT_VIDEO_MATRIX_CB ENCL_VIDEO_MATRIX_CB
#define ENCT_VIDEO_MATRIX_CR ENCL_VIDEO_MATRIX_CR
#define ENCT_VIDEO_RGBIN_CTRL ENCL_VIDEO_RGBIN_CTRL
#define ENCT_MAX_LINE_SWITCH_POINT ENCL_MAX_LINE_SWITCH_POINT
#define ENCT_DACSEL_0 ENCL_DACSEL_0
#define ENCT_DACSEL_1 ENCL_DACSEL_1

#undef GAMMA_CNTL_PORT
#undef GAMMA_DATA_PORT
#undef GAMMA_ADDR_PORT
#undef GAMMA_VCOM_HSWITCH_ADDR
#undef RGB_BASE_ADDR
#undef RGB_COEFF_ADDR
#undef POL_CNTL_ADDR
#undef DITH_CNTL_ADDR
#undef GAMMA_PROBE_CTRL
#undef GAMMA_PROBE_COLOR_L
#undef GAMMA_PROBE_COLOR_H
#undef GAMMA_PROBE_HL_COLOR
#undef GAMMA_PROBE_POS_X
#undef GAMMA_PROBE_POS_Y
#undef STH1_HS_ADDR
#undef STH1_HE_ADDR
#undef STH1_VS_ADDR
#undef STH1_VE_ADDR
#undef STH2_HS_ADDR
#undef STH2_HE_ADDR
#undef STH2_VS_ADDR
#undef STH2_VE_ADDR
#undef OEH_HS_ADDR
#undef OEH_HE_ADDR
#undef OEH_VS_ADDR
#undef OEH_VE_ADDR
#undef VCOM_HSWITCH_ADDR
#undef VCOM_VS_ADDR
#undef VCOM_VE_ADDR
#undef CPV1_HS_ADDR
#undef CPV1_HE_ADDR
#undef CPV1_VS_ADDR
#undef CPV1_VE_ADDR
#undef CPV2_HS_ADDR
#undef CPV2_HE_ADDR
#undef CPV2_VS_ADDR
#undef CPV2_VE_ADDR
#undef STV1_HS_ADDR
#undef STV1_HE_ADDR
#undef STV1_VS_ADDR
#undef STV1_VE_ADDR
#undef STV2_HS_ADDR
#undef STV2_HE_ADDR
#undef STV2_VS_ADDR
#undef STV2_VE_ADDR
#undef OEV1_HS_ADDR
#undef OEV1_HE_ADDR
#undef OEV1_VS_ADDR
#undef OEV1_VE_ADDR
#undef OEV2_HS_ADDR
#undef OEV2_HE_ADDR
#undef OEV2_VS_ADDR
#undef OEV2_VE_ADDR
#undef OEV3_HS_ADDR
#undef OEV3_HE_ADDR
#undef OEV3_VS_ADDR
#undef OEV3_VE_ADDR
#undef LCD_PWR_ADDR
#undef LCD_PWM0_LO_ADDR
#undef LCD_PWM0_HI_ADDR
#undef LCD_PWM1_LO_ADDR
#undef LCD_PWM1_HI_ADDR
#undef INV_CNT_ADDR
#undef TCON_MISC_SEL_ADDR
#undef DUAL_PORT_CNTL_ADDR
#undef TCON_DOUBLE_CTL
#undef TCON_PATTERN_HI
#undef TCON_PATTERN_LO
#undef DE_HS_ADDR
#undef DE_HE_ADDR
#undef DE_VS_ADDR
#undef DE_VE_ADDR
#undef HSYNC_HS_ADDR
#undef HSYNC_HE_ADDR
#undef HSYNC_VS_ADDR
#undef HSYNC_VE_ADDR
#undef VSYNC_HS_ADDR
#undef VSYNC_HE_ADDR
#undef VSYNC_VS_ADDR
#undef VSYNC_VE_ADDR
#undef LCD_MCU_CTL

#define GAMMA_CNTL_PORT L_GAMMA_CNTL_PORT
#define GAMMA_DATA_PORT L_GAMMA_DATA_PORT
#define GAMMA_ADDR_PORT L_GAMMA_ADDR_PORT
#define GAMMA_VCOM_HSWITCH_ADDR L_GAMMA_VCOM_HSWITCH_ADDR
#define RGB_BASE_ADDR L_RGB_BASE_ADDR
#define RGB_COEFF_ADDR L_RGB_COEFF_ADDR
#define POL_CNTL_ADDR L_POL_CNTL_ADDR
#define DITH_CNTL_ADDR L_DITH_CNTL_ADDR
#define GAMMA_PROBE_CTRL L_GAMMA_PROBE_CTRL
#define GAMMA_PROBE_COLOR_L L_GAMMA_PROBE_COLOR_L
#define GAMMA_PROBE_COLOR_H L_GAMMA_PROBE_COLOR_H
#define GAMMA_PROBE_HL_COLOR L_GAMMA_PROBE_HL_COLOR
#define GAMMA_PROBE_POS_X L_GAMMA_PROBE_POS_X
#define GAMMA_PROBE_POS_Y L_GAMMA_PROBE_POS_Y
#define STH1_HS_ADDR L_STH1_HS_ADDR
#define STH1_HE_ADDR L_STH1_HE_ADDR
#define STH1_VS_ADDR L_STH1_VS_ADDR
#define STH1_VE_ADDR L_STH1_VE_ADDR
#define STH2_HS_ADDR L_STH2_HS_ADDR
#define STH2_HE_ADDR L_STH2_HE_ADDR
#define STH2_VS_ADDR L_STH2_VS_ADDR
#define STH2_VE_ADDR L_STH2_VE_ADDR
#define OEH_HS_ADDR L_OEH_HS_ADDR
#define OEH_HE_ADDR L_OEH_HE_ADDR
#define OEH_VS_ADDR L_OEH_VS_ADDR
#define OEH_VE_ADDR L_OEH_VE_ADDR
#define VCOM_HSWITCH_ADDR L_VCOM_HSWITCH_ADDR
#define VCOM_VS_ADDR L_VCOM_VS_ADDR
#define VCOM_VE_ADDR L_VCOM_VE_ADDR
#define CPV1_HS_ADDR L_CPV1_HS_ADDR
#define CPV1_HE_ADDR L_CPV1_HE_ADDR
#define CPV1_VS_ADDR L_CPV1_VS_ADDR
#define CPV1_VE_ADDR L_CPV1_VE_ADDR
#define CPV2_HS_ADDR L_CPV2_HS_ADDR
#define CPV2_HE_ADDR L_CPV2_HE_ADDR
#define CPV2_VS_ADDR L_CPV2_VS_ADDR
#define CPV2_VE_ADDR L_CPV2_VE_ADDR
#define STV1_HS_ADDR L_STV1_HS_ADDR
#define STV1_HE_ADDR L_STV1_HE_ADDR
#define STV1_VS_ADDR L_STV1_VS_ADDR
#define STV1_VE_ADDR L_STV1_VE_ADDR
#define STV2_HS_ADDR L_STV2_HS_ADDR
#define STV2_HE_ADDR L_STV2_HE_ADDR
#define STV2_VS_ADDR L_STV2_VS_ADDR
#define STV2_VE_ADDR L_STV2_VE_ADDR
#define OEV1_HS_ADDR L_OEV1_HS_ADDR
#define OEV1_HE_ADDR L_OEV1_HE_ADDR
#define OEV1_VS_ADDR L_OEV1_VS_ADDR
#define OEV1_VE_ADDR L_OEV1_VE_ADDR
#define OEV2_HS_ADDR L_OEV2_HS_ADDR
#define OEV2_HE_ADDR L_OEV2_HE_ADDR
#define OEV2_VS_ADDR L_OEV2_VS_ADDR
#define OEV2_VE_ADDR L_OEV2_VE_ADDR
#define OEV3_HS_ADDR L_OEV3_HS_ADDR
#define OEV3_HE_ADDR L_OEV3_HE_ADDR
#define OEV3_VS_ADDR L_OEV3_VS_ADDR
#define OEV3_VE_ADDR L_OEV3_VE_ADDR
#define LCD_PWR_ADDR L_LCD_PWR_ADDR
#define LCD_PWM0_LO_ADDR L_LCD_PWM0_LO_ADDR
#define LCD_PWM0_HI_ADDR L_LCD_PWM0_HI_ADDR
#define LCD_PWM1_LO_ADDR L_LCD_PWM1_LO_ADDR
#define LCD_PWM1_HI_ADDR L_LCD_PWM1_HI_ADDR
#define INV_CNT_ADDR L_INV_CNT_ADDR
#define TCON_MISC_SEL_ADDR L_TCON_MISC_SEL_ADDR
#define DUAL_PORT_CNTL_ADDR L_DUAL_PORT_CNTL_ADDR
#define TCON_DOUBLE_CTL L_TCON_DOUBLE_CTL
#define TCON_PATTERN_HI L_TCON_PATTERN_HI
#define TCON_PATTERN_LO L_TCON_PATTERN_LO
#define DE_HS_ADDR L_DE_HS_ADDR
#define DE_HE_ADDR L_DE_HE_ADDR
#define DE_VS_ADDR L_DE_VS_ADDR
#define DE_VE_ADDR L_DE_VE_ADDR
#define HSYNC_HS_ADDR L_HSYNC_HS_ADDR
#define HSYNC_HE_ADDR L_HSYNC_HE_ADDR
#define HSYNC_VS_ADDR L_HSYNC_VS_ADDR
#define HSYNC_VE_ADDR L_HSYNC_VE_ADDR
#define VSYNC_HS_ADDR L_VSYNC_HS_ADDR
#define VSYNC_HE_ADDR L_VSYNC_HE_ADDR
#define VSYNC_VS_ADDR L_VSYNC_VS_ADDR
#define VSYNC_VE_ADDR L_VSYNC_VE_ADDR
#define LCD_MCU_CTL L_LCD_MCU_CTL


#endif

#endif // REGISTER_H

// ----------------------------------------------------------------------
// This file is automatically generated from the script:
//
// ./create_headers_for_mmc_register_map_h.pl
//
// and was applied to the file
//
// ./mmc_reg.vh
//
// DO NOT EDIT!!!!!
// ----------------------------------------------------------------------
//
#ifdef MMC_REG_DEFINE
#else
#define MMC_REG_DEFINE

#if 0
#define MMC_Wr(addr, data) *(volatile uint32_t *)(addr)=(data)
#define MMC_Rd(addr) *(volatile uint32_t *)(addr)
#define writel(v,c)  *(volatile uint32_t *)(c ) = v
#define readl(c)  *(volatile uint32_t *)(c )
#endif

//
// Reading file:  ./mmc_reg.vh
//
//
// Reading file:  ../mmc/dmc/rtl/dmc_reg.vh
//
// -----------------------------------------------
// REG_BASE:  DMC_REG_BASE = 0xff638000
// -----------------------------------------------
#define DMC_REQ_CTRL                               ((0x0000  << 2) + 0xff638000)
  //bit 14.  enable dmc request of chan 15. Reserved for GE2D interface. Async interface.
  //bit 14.  enable dmc request of chan 14. DOS HCODEC  interface   Sync interface.
  //bit 13.  enable dmc request of chan 13. DOS VDEC  interface   Sync interface.
  //bit 12.  enable dmc request of chan 12. VPU write interface 1  Sync interface.
  //bit 11.  enable dmc request of chan 11. VPU write interface 0  Sync interface.
  //bit 10.  enable dmc request of chan 10. VPU read interface 2.   Sync interface.
  //bit 9.   enable dmc request of chan 9.  VPU read interface 1.   Sync interface.
  //bit 8.   enable dmc request of chan 8.  VPU read interface 0.  Sync interface.
  //bit 7.   enable dmc request of chan 7.  DEVICE.    Async interface.
  //bit 6.   enable dmc request of chan 6.  not used.
  //bit 5.   enable dmc request of chan 5.  not used.
  //bit 4.   enable dmc request of chan 4.  HEVC sync interface.
  //bit 3.   enable dmc request of chan 3.  HDCP/HDMI  32bits. Async interface.
  //bit 2.   enable dmc request of chan 2.  Mali 1   Sync interface.
  //bit 1.   enable dmc request of chan 1.  Mali 0.  Sync interface.
  //bit 0.   enable dmc request of chan 0.  CPU/A53   Sync interface.
#define DMC_SOFT_RST                               ((0x0001  << 2) + 0xff638000)
  //bit 31~30.  reserved for future.
  //bit 29.  DMC test soft reset_n.  0 : reset. 1 : normal working mode.
  //bit 28.  DMC low power control moudle soft reset_n.    0 : reset. 1 : normal working mode.
  //bit 27.  DMC QOS monitor module soft reset_n.   0 : reset. 1 : normal working mode.
  //bit 26.  DMC register modle soft reset_n.       0 : reset. 1 : normal working mode.
  //bit 25.  DMC canvas transfer module soft reset_n.  0 : reset. 1 : normal working mode.
  //bit 24.  DMC command buffers and command generation modules soft reset.  0 = reset. 1:
  //bit 16.  DDR channel 0 PCTL module n_clk domain soft reset_n. 0 : reset. 1 : normal working mode.
  //bit 15:0. 16 input chan inteface  n_clk domain reset control.  if the channel is asynchronous FIFO interface, then both side of the clocks must be turn off before reset this module. If the channel is synchronous interface, you can reset it any time.
  //bit 15.  n_clk domain  chan 15 soft reset_n control. 0 : reset. 1: normal working mode.
  //bit 14.  n_clk domain  chan 14 soft reset_n control. 0 : reset. 1: normal working mode.
  //bit 13.  n_clk domain  chan 13 soft reset_n control. 0 : reset. 1: normal working mode.
  //bit 12.  n_clk domain  chan 12 soft reset_n control. 0 : reset. 1: normal working mode.
  //bit 11.  n_clk domain  chan 11 soft reset_n control. 0 : reset. 1: normal working mode.
  //bit 10.  n_clk domain  chan 10 soft reset_n control. 0 : reset. 1: normal working mode.
  //bit  9.  n_clk domain  chan  9 soft reset_n control. 0 : reset. 1: normal working mode.
  //bit  8.  n_clk domain  chan  8 soft reset_n control. 0 : reset. 1: normal working mode.
  //bit  7.  n_clk domain  chan  7 soft reset_n control. 0 : reset. 1: normal working mode.
  //bit  6.  n_clk domain  chan  6 soft reset_n control. 0 : reset. 1: normal working mode.
  //bit  5.  n_clk domain  chan  5 soft reset_n control. 0 : reset. 1: normal working mode.
  //bit  4.  n_clk domain  chan  4 soft reset_n control. 0 : reset. 1: normal working mode.
  //bit  3.  n_clk domain  chan  3 soft reset_n control. 0 : reset. 1: normal working mode.
  //bit  2.  n_clk domain  chan  2 soft reset_n control. 0 : reset. 1: normal working mode.
  //bit  1.  n_clk domain  chan  1 soft reset_n control. 0 : reset. 1: normal working mode.
  //bit  0.  n_clk domain  chan  0 soft reset_n control. 0 : reset. 1: normal working mode.
#define DMC_SOFT_RST1                              ((0x0002  << 2) + 0xff638000)
  //bit 31~16 not used.
  //bit 15:0.  if the chan interface is asynchronous interface, then the related bit is for the main clock domain reset control. if the interface is synchronouse interface, this bit is not used.
  //bit 15:   input chan 15 main clock domain soft reset_n.  0 : reset. 1: normal working mode.
  //bit 14:8.  not used in GX. All those channels are synchronous interface.
  //bit 7:    input chan 7 main clock domain soft reset_n.
  //bit 6:4.  not used in GX. no input connectted.
  //bit 3.    input chan 3 main clock domain soft reset_n.
  //bit 2:0.  not used in GX. All those channels are synchronous interface.

#define DMC_RST_STS1                               ((0x0004  << 2) + 0xff638000)
  //31~16.  not used.
  //15~0.   Read only.  the DMC_SOFT_RST1 signal in n_clk domain. the purpose of this register is when one of the 2 clocks is too slow or too fast,  we can read this register to make sure another clock domain reset is done.

#define DMC_VERSION                                ((0x0005  << 2) + 0xff638000)
   //read only 32'h000a0001.  for GXBB, version 1.

#define DMC_RAM_PD                                 ((0x0011  << 2) + 0xff638000)
   //5:4.   DDR channel 1 READ/WRITE data path SRAMS in power down control. 2'b11: power down. 2'b00 : working mode.
   //3:2.   DDR channel 0 READ/WRITE data path SRAMS in power down control. 2'b11 : power down. 2'b00 : working mode.
   //1:0.   CANVAS LUT memories in power down mode control. 2'b11 : power down. 2'b00 : working mode.

#define DC_CAV_LUT_DATAL                           ((0x0012  << 2) + 0xff638000)
  //low 32 bits of canvas data which need to be configured to canvas memory.
#define DC_CAV_LUT_DATAH                           ((0x0013  << 2) + 0xff638000)
  //high 32bits of cavnas data which need to be configured to canvas memory.
  //64bits CANVAS look up table
  //bit 60:58   Endian control.
      //3'b000:  no endian change.
      //3'b001:
  //bit 57:56.   Canvas block mode.  2 : 64x32, 1: 32x32; 0 : linear mode.
  //bit 55:      canvas Y direction wrap control. 1: wrap back in y.  0: not wrap back.
  //bit 54:      canvas X direction wrap control. 1: wrap back in X.  0: not wrap back.
  //bit 53:41.   canvas Hight.
  //bit 40:29.   canvas Width, unit: 8bytes. must in 32bytes boundary. that means last 2 bits must be 0.
  //bit 28:0.    cavnas start address.   unit. 8 bytes. must be in 32bytes boundary. that means last 2bits must be 0.

#define DC_CAV_LUT_ADDR                            ((0x0014  << 2) + 0xff638000)
  //bit 9:8.   write 9:8 2'b10. the canvas data will saved in canvas memory with addres 7:0.
  //bit 7:0.   256 canvas Look up table address.

#define DC_CAV_LUT_RDATAL                          ((0x0015  << 2) + 0xff638000)
  // CBUS low 32bytes canvas read back data from LUT.
#define DC_CAV_LUT_RDATAH                          ((0x0016  << 2) + 0xff638000)
  // Cbus high 32bytes canvas read back data from LUT.

#define DMC_2ARB_CTRL                              ((0x0020  << 2) + 0xff638000)
  //11:6.  the final arbitration control from AXI bus(port channel 0~7).
  //5:0.   the final arbitration weight control for Ambus ( port channel 8~15).


#define DMC_REFR_CTRL1                             ((0x0023  << 2) + 0xff638000)
  //bit 15    DMC ddr1 PVT request enable if bit3 enabled.
  //bit 14    DMC ddr0  PVT request enable if bit3 enabled
  //bit 13    ddr1 DDR ZQCS comand generation enable.
  //bit 12    ddr0 DDR ZQCS command generation enable.
  //bit 11    ddr1 refesh enable while PCTL in config state. 1: enable. 0: disable.
  //bit 10    ddr0 refesh enable while PCTL in config state. 1: enable. 0: disable.
  //bit 7     dmc to control auto_refresh enable
  //bit 6:4   refresh number per refresh cycle..
  //bit 3     DMC controlled pvt enable 1 : PVT request generated by DMC tPVTI of refresh period. 0 : PVT generated every time refresh command.
  //bit 2     DMC controlled DDR ZQCS genreation enable.  1 : ZQCS request generated by DMC tZQCI refresh period.  0 : no DMC controlled ZQCS.
  //bit 1      ddr1 auto refresh dmc control select.
  //bit 0      ddr0 auto refresh dmc control select.

#define DMC_REFR_CTRL2                             ((0x0024  << 2) + 0xff638000)
  //bit 31:24   tZQCI
  //bit 23:16   tPVTI
  //bit 15:8    tREFI
  //bit 7:0     t100ns


#define DMC_MON_CTRL1                              ((0x0025  << 2) + 0xff638000)
   //bit 31:16.  qos monitor 0 channel select.   16 port selection. 1 bit for one port.
   //bit 15:0.   port select for the selected channel.

#define DMC_MON_CTRL2                              ((0x0026  << 2) + 0xff638000)
   //bit 31.   qos_mon_en.    write 1 to trigger the enable. polling this bit 0, means finished.  or use interrupt to check finish.
   //bit 30.   qos_mon interrupt clear.  clear the qos monitor result.  read 1 = qos mon finish interrupt.
   //bit 20.   qos_mon_trig_sel. 0: always use DMC_MON_CTRL3 defined timer.
   //bit 3.    qos monitor 3 enable.
   //bit 2.    qos monitor 2 enable.
   //bit 1.    qos monitor 1 enable.
   //bit 0.    qos monitor 0 enable.
#define DMC_MON_CTRL3                              ((0x0027  << 2) + 0xff638000)
  // qos_mon_clk_timer.   How long to measure the bandwidth.

#define DMC_MON_CTRL4                              ((0x0018  << 2) + 0xff638000)
   //bit 31:16.  qos monitor 1 channel select.   16 port selection. 1 bit for one port.
   //bit 15:0.   port select for the selected channel.
#define DMC_MON_CTRL5                              ((0x0019  << 2) + 0xff638000)
   //bit 31:16.  qos monitor 2 channel select.   16 port selection. 1 bit for one port.
   //bit 15:0.   port select for the selected channel.
#define DMC_MON_CTRL6                              ((0x001a  << 2) + 0xff638000)
   //bit 31:16.  qos monitor 3 channel select.   16 port selection. 1 bit for one port.
   //bit 15:0.   port select for the selected channel.


#define DMC_MON_ALL_REQ_CNT                        ((0x0028  << 2) + 0xff638000)
  // at the test period,  the whole MMC request time.
#define DMC_MON_ALL_GRANT_CNT                      ((0x0029  << 2) + 0xff638000)
  // at the test period,  the whole MMC granted data cycles. 64bits unit.
#define DMC_MON_ONE_GRANT_CNT                      ((0x002a  << 2) + 0xff638000)
  // at the test period,  the granted data cycles for the selected channel and ports.
#define DMC_MON_SEC_GRANT_CNT                      ((0x002b  << 2) + 0xff638000)
  // at the test period,  the granted data cycles for the selected channel and ports.
#define DMC_MON_THD_GRANT_CNT                      ((0x002c  << 2) + 0xff638000)
  // at the test period,  the granted data cycles for the selected channel and ports.
#define DMC_MON_FOR_GRANT_CNT                      ((0x002d  << 2) + 0xff638000)
  // at the test period,  the granted data cycles for the selected channel and ports.

#define DMC_CLKG_CTRL0                             ((0x0030  << 2) + 0xff638000)
  //bit 29.  enalbe auto clock gating for write rsp generation.
  //bit 28.  enalbe auto clock gating for read rsp generation.
  //bit 27.  enalbe auto clock gating for ddr1 read back data buffer.
  //bit 26.  enalbe auto clock gating for ddr0 read back data buffer.
  //bit 25.  enalbe auto clock gating for ddr1 command filter.
  //bit 24.  enalbe auto clock gating for ddr0 command filter.
  //bit 23.  enalbe auto clock gating for ddr1 write reorder buffer.
  //bit 22.  enalbe auto clock gating for ddr0 write reorder buffer.
  //bit 21.  enalbe auto clock gating for ddr1 write data buffer.
  //bit 20.  enalbe auto clock gating for ddr0 write data buffer.
  //bit 19.  enalbe auto clock gating for ddr1 read reorder buffer.
  //bit 18.  enalbe auto clock gating for ddr0 read reorder buffer.
  //bit 17.  enalbe auto clock gating for read canvas.
  //bit 16.  enalbe auto clock gating for write canvas.
  //bit 15.  enalbe auto clock gating for chan 15.
  //bit 14.  enalbe auto clock gating for chan 14.
  //bit 13.  enalbe auto clock gating for chan 13.
  //bit 12.  enalbe auto clock gating for chan 12.
  //bit 11.  enalbe auto clock gating for chan 11.
  //bit 10.  enalbe auto clock gating for chan 10.
  //bit 9.   enalbe auto clock gating for chan 9.
  //bit 8.   enalbe auto clock gating for chan 8.
  //bit 7.   enalbe auto clock gating for chan 7.
  //bit 6.   enalbe auto clock gating for chan 6.
  //bit 5.   enalbe auto clock gating for chan 5.
  //bit 4.   enalbe auto clock gating for chan 4.
  //bit 3.   enalbe auto clock gating for chan 3.
  //bit 2.   enalbe auto clock gating for chan 2.
  //bit 1.   enalbe auto clock gating for chan 1.
  //bit 0.   enalbe auto clock gating for chan 0.
#define DMC_CLKG_CTRL1                             ((0x0031  << 2) + 0xff638000)
  //bit 29.  force to disalbe the clock of write rsp generation.
  //bit 28.  force to disalbe the clock of read rsp generation.
  //bit 27.  force to disalbe the clock of ddr1 read back data buffer.
  //bit 26.  force to disalbe the clock of ddr0 read back data buffer.
  //bit 25.  force to disalbe the clock of ddr1 command filter.
  //bit 24.  force to disalbe the clock of ddr0 command filter.
  //bit 23.  force to disalbe the clock of ddr1 write reorder buffer.
  //bit 22.  force to disalbe the clock of ddr0 write reorder buffer.
  //bit 21.  force to disalbe the clock of ddr1 write data buffer.
  //bit 20.  force to disalbe the clock of ddr0 write data buffer.
  //bit 19.  force to disalbe the clock of ddr1 read reorder buffer.
  //bit 18.  force to disalbe the clock of ddr0 read reorder buffer.
  //bit 17.  force to disalbe the clock of read canvas.
  //bit 16.  force to disalbe the clock of write canvas.
  //bit 15.  force to disalbe the clock of chan 15.
  //bit 14.  force to disalbe the clock of chan 14.
  //bit 13.  force to disalbe the clock of chan 13.
  //bit 12.  force to disalbe the clock of chan 12.
  //bit 11.  force to disalbe the clock of chan 11.
  //bit 10.  force to disalbe the clock of chan 10.
  //bit 9.   force to disalbe the clock of chan 9.
  //bit 8.   force to disalbe the clock of chan 8.
  //bit 7.   force to disalbe the clock of chan 7.
  //bit 6.   force to disalbe the clock of chan 6.
  //bit 5.   force to disalbe the clock of chan 5.
  //bit 4.   force to disalbe the clock of chan 4.
  //bit 3.   force to disalbe the clock of chan 3.
  //bit 2.   force to disalbe the clock of chan 2.
  //bit 1.   force to disalbe the clock of chan 1.
  //bit 0.   force to disalbe the clock of chan 0.
#define DMC_N_CLK_CTRL                             ((0x0033  << 2) + 0xff638000)
  //bit 6 maunal control for hdcp n_clk.   1: enable clock. 0 : disable clock.
  //bit 5 maunal control for device n_clk  1: enable clock. 0 : disable clock.
  //bit 4 maunal control for ge2d n_clk.   1: enable clock. 0 : disable clock.
  //bit 3 maunal control for Mali n_clk.   1: enable clock. 0 : disable clock.
  //bit 2 maunal control for vpu n_clk.    1: enable clock. 0 : disable clock.
  //bit 1 maunal control for dos n_clk.    1: enable clock. 0 : disable clock.
  //bit 0.maunal control for cpu n_clk.    1: enable clock. 0 : disable clock.

#define DMC_CHAN_STS                               ((0x0032  << 2) + 0xff638000)
  // read only regsiter.
  //bit 19      ddr0 write data buffer idle. 1 : idle 0: busy.
  //bit 18      ddr0 write data buffer idle. 1 : idle 0: busy.
  //bit 17       ddr1 wbuf idle.              1 : idle 0: busy.
  //bit 16       ddr0 wbuf idle.              1 : idle 0: busy.
  //bit 15:8     ambus channel idle.          1 : idle 0: busy.
  //bit 7:0.     axibus channel idle.         1 : idle 0: busy.

#define DMC_CMD_FILTER_CTRL1                       ((0x0040  << 2) + 0xff638000)
   //bit 30.   1 : use DDR4 special filter.
   //bit 29:20  nugt read buf full access limit
   //bit 19:10.  ugt read access limit.
   //bit 9:0  nugt read access limit

#define DMC_CMD_FILTER_CTRL2                       ((0x0041  << 2) + 0xff638000)
   //bit 29:20  ugt read buf full access limit
   //bit 9:0  nugt write access pending limit
   //bit 19:10.  ugt write access pending limit.

#define DMC_CMD_FILTER_CTRL3                       ((0x0042  << 2) + 0xff638000)
  //bit 31.    force wbuf empty.
  //bit 30:26  wbuf high level number
  //bit 25:21  wbuf mid  level number
  //bit 20:16  wbuf low level number
  //bit 14:10  rbuf high level number
  //bit 9:5    rbuf middle level number
  //bit 4:0    rbuf low level number

#define DMC_CMD_FILTER_CTRL4                       ((0x0043  << 2) + 0xff638000)
  //bit 23:16.  tAP.   auto precharge timer when bank is idle.
  //bit 14:10.  tMISS latency. page miss command latency for next same page not hit command.
  //bit 9:0.    rbuf idle timer to let the wbuf output.

#define DMC_CMD_FILTER_CTRL5                       ((0x0044  << 2) + 0xff638000)
  //bit 31:24   Once ddr data bus switch to read, the maxmum read command number to give up the bus when there's write request pending for write buffer.
  //bit 23:16   Once ddr data bus switch to write, the maxmum write command number to give up the bus when there's read request pending too long.
  //bit 15:8.   Once ddr data bus switch to read, the minimum read command number to transfer back to write stage if there's still pending read request.
  //bit 7:0.    Once ddr data bus switch to write, the minimum write command number to transfer back to read stage if there's still pending write request.


#define DMC_CMD_BUFFER_CTRL                        ((0x0045  << 2) + 0xff638000)
  //bit 31:26  total write buffer number. default 32.
  //bit 25:20  total read buffer number. default 32.
  //bit 19:8    reserved.
  //bit 7:0    aw_pending_inc_num.  incease write ugent level 1 when write command waiting to in write buffer that long.

#define DMC_CMD_BUFFER_CTRL1                       ((0x0035  << 2) + 0xff638000)
  //bit 29:24  read buffer number in non-urgent request.
  //bit 23:16  read buffer bank miss watch dog threshold.
  //bit 15:12  read buffer urgent level 3 counter inc weight.
  //bit 11:8   read buffer urgent level 2 counter inc weight.
  //bit 7:4    read buffer urgent level 1 counter inc weight.
  //bit 3:0    read buffer urgent level 0 counter inc weight.

#define DMC_CMD_FILTER_CTRL6                       ((0x0036  << 2) + 0xff638000)
  //bit 31:24   write urgent 3 request pending hold num.
  //bit 23:16   write urgent 2 request pending hold num.
  //bit 15:8.   write urgent 1 request pending hold num.
  //bit 7:0.    write urgent 0 request pending hold num.

#define DMC_PCTL_LP_CTRL                           ((0x0046  << 2) + 0xff638000)
  //bit 13   force disable pctl cmu module clock. 1 : force disable. 0 : not forced.
  //bit 12   force disable pctl reg module clock. 1 : force disable. 0 : not forced.
  //bit 11   force disable pctl dcu module clock. 1 : force disable. 0 : not forced.
  //bit 10   force disable pctl dpu module clock. 1 : force disable. 0 : not forced.
  //bit 9   force disable pctl sel module clock. 1 : force disable. 0 : not forced.
  //bit 8   force disable pctl upd module clock. 1 : force disable. 0 : not forced.
  //bit 5   force enable pctl cmu module clock. 1 : enable. 0 : use auto logic to control if not force to disable.
  //bit 4   force enable pctl reg module clock. 1 : enable. 0 : use auto logic to control if not force to disable.
  //bit 3   force enable pctl dcu module clock. 1 : enable. 0 : use auto logic to control if not force to disable.
  //bit 2   force enable pctl dpu module clock. 1 : enable. 0 : use auto logic to control if not force to disable
  //bit 1   force enable pctl sel module clock. 1 : enable. 0 : use auto logic to control if not force to disable.
  //bit 0   force enable pctl upd module clock. 1 : enable. 0 : use auto logic to control if not force to disable.

#define DMC_RDDBUF_CTRL                            ((0x0047  << 2) + 0xff638000)
  //bit 9:5   read data BUFFER empty limit with no data output.
  //bit 4:0   read data BUFFER empty limit with data outputing.

#define DMC_AM0_CHAN_CTRL                          ((0x0060  << 2) + 0xff638000)
  //bit 31       enable to incr 2 urgent levels if the pending cycles is doubled.
  //bit 29:20.   write request pending cycle number  to inc urgent level if not granted.
  //bit 18.      force this channel all request to be super urgent request.
  //bit 17.      force this channel all request to be urgent request.
  //bit 16.      force this channel all request to be non urgent request.
  //bit 13:4.    read request pending cycle number  to inc urgent level if not granted.
  //bit 3:0      canvas arbiter arbiter weight
#define DMC_AM0_HOLD_CTRL                          ((0x0061  << 2) + 0xff638000)
    //15:8 read hold num.   max outstanding request number.
    //7:0  read hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.

#define DMC_AM0_CHAN_CTRL1                         ((0x0069  << 2) + 0xff638000)
 //bit 31:2  no used.
 //bit 1 :   side bank urgent  increase enable.
 //bit 0 :   side bank urgent decrease urgent enable.

#define DMC_AM1_CHAN_CTRL                          ((0x006a  << 2) + 0xff638000)
  //bit 31       enable to incr 2 urgent levels if the pending cycles is doubled.
  //bit 29:20.   write request pending cycle number  to inc urgent level if not granted.
  //bit 18.      force this channel all request to be super urgent request.
  //bit 17.      force this channel all request to be urgent request.
  //bit 16.      force this channel all request to be non urgent request.
  //bit 13:4.    read request pending cycle number  to inc urgent level if not granted.
  //bit 3:0      canvas arbiter arbiter weight
#define DMC_AM1_HOLD_CTRL                          ((0x006b  << 2) + 0xff638000)
    //15:8 read hold num.   max outstanding request number.
    //7:0  read hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.

#define DMC_AM1_CHAN_CTRL1                         ((0x0073  << 2) + 0xff638000)
 //bit 31:2  no used.
 //bit 1 :   side bank urgent  increase enable.
 //bit 0 :   side bank urgent decrease urgent enable.

#define DMC_AM2_CHAN_CTRL                          ((0x0074  << 2) + 0xff638000)
#define DMC_AM2_HOLD_CTRL                          ((0x0075  << 2) + 0xff638000)
    //15:8 read hold num.   max outstanding request number.
    //7:0  read hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.

#define DMC_AM2_CHAN_CTRL1                         ((0x007d  << 2) + 0xff638000)
 //bit 31:2  no used.
 //bit 1 :   side bank urgent  increase enable.
 //bit 0 :   side bank urgent decrease urgent enable.

#define DMC_AM3_CHAN_CTRL                          ((0x007e  << 2) + 0xff638000)
#define DMC_AM3_HOLD_CTRL                          ((0x007f  << 2) + 0xff638000)
    //31:24 write hold num.   max outstanding request number.
    //23:16  write hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.

#define DMC_AM3_CHAN_CTRL1                         ((0x0087  << 2) + 0xff638000)

#define DMC_AM4_CHAN_CTRL                          ((0x0088  << 2) + 0xff638000)
#define DMC_AM4_HOLD_CTRL                          ((0x0089  << 2) + 0xff638000)
    //31:24 write hold num.   max outstanding request number.
    //23:16  write hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.
#define DMC_AM4_CHAN_CTRL1                         ((0x0091  << 2) + 0xff638000)

#define DMC_AM5_CHAN_CTRL                          ((0x0092  << 2) + 0xff638000)
#define DMC_AM5_HOLD_CTRL                          ((0x0093  << 2) + 0xff638000)
    //31:24 write hold num.   max outstanding request number.
    //23:16  write hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.
    //15:8 read hold num.   max outstanding request number.
    //7:0  read hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.


#define DMC_AM6_CHAN_CTRL                          ((0x009c  << 2) + 0xff638000)
#define DMC_AM6_HOLD_CTRL                          ((0x009d  << 2) + 0xff638000)
    //31:24 write hold num.   max outstanding request number.
    //23:16  write hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.
    //15:8 read hold num.   max outstanding request number.
    //7:0  read hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.


#define DMC_AM7_CHAN_CTRL                          ((0x00a6  << 2) + 0xff638000)
#define DMC_AM7_HOLD_CTRL                          ((0x00a7  << 2) + 0xff638000)
    //31:24 write hold num.   max outstanding request number.
    //23:16  write hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.
    //15:8 read hold num.   max outstanding request number.
    //7:0  read hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.


#define DMC_AXI0_CHAN_CTRL                         ((0x00b0  << 2) + 0xff638000)
  //bit 31       enable to incr 2 urgent levels if the pending cycles is doubled.
  //bit 29:20.   write request pending cycle number  to inc urgent level if not granted.
  //bit 19.      axi0 default urgent control : 1 use AWUGT/ARUGT pins in the port. 0 : use bit[15:14] of this register..
  //bit 18.      force this channel all request to be super urgent request.
  //bit 17.      force this channel all request to be urgent request.
  //bit 16.      force this channel all request to be non urgent request.
  //bit 15:14    axi0 default urgent level.
  //bit 13:4.    read request pending cycle number  to inc urgent level if not granted.
  //bit 3:0      arbiter weight
#define DMC_AXI0_HOLD_CTRL                         ((0x00b1  << 2) + 0xff638000)
    //31:24 write hold num.   max outstanding request number.
    //23:16  write hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.
    //15:8 read hold num.   max outstanding request number.
    //7:0  read hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.
#define DMC_AXI0_CHAN_CTRL1                        ((0x00b9  << 2) + 0xff638000)
  //bit 19:16.  FIQ status
  //bit 15:12.  IRQ status.
  //bit 11  ARM  FIQ controlled super urgent enable.
  //bit 10  ARM  FIQ controlled urgent enable.
  //bit  9. ARM IRQ controlled super urgent enable.
  //bit  8. ARM IRQ controlled urgent enable.
  //bit  7.  IRQ/FIQ controll enable.
  //bit  6:5.  not used.
  //bit 4. enable AXI0 auto urgent enable. When there's no other request, treat the AXI0 as super urgent request. other wise, use the bit3:0 to set the urgent.
  //bit 3:2 A9 urgent if there's VIU request.
  //bit 1:0 A9 urgent if there's request other than VIU


#define DMC_AXI1_CHAN_CTRL                         ((0x00ba  << 2) + 0xff638000)
  //bit 31       enable to incr 2 urgent levels if the pending cycles is doubled.
  //bit 30.   Not used.
  //bit 29:20.   write request pending cycle number  to inc urgent level if not granted.
  //bit 19.      axi0 default urgent control : 1 use AWUGT/ARUGT pins in the port. 0 : use bit[15:14] of this register..
  //bit 18.      force this channel all request to be super urgent request.
  //bit 17.      force this channel all request to be urgent request.
  //bit 16.      force this channel all request to be non urgent request.
  //bit 15:14    axi1 default urgent level.
  //bit 13:4.    read request pending cycle number  to inc urgent level if not granted.
  //bit 3:0      canvas arbiter arbiter weight
#define DMC_AXI1_HOLD_CTRL                         ((0x00bb  << 2) + 0xff638000)
    //31:24 write hold num.   max outstanding request number.
    //23:16  write hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.
    //15:8 read hold num.   max outstanding request number.
    //7:0  read hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.

#define DMC_AXI2_CHAN_CTRL                         ((0x00c4  << 2) + 0xff638000)
  //bit 31       enable to incr 2 urgent levels if the pending cycles is doubled.
  //bit 30.   Not used.
  //bit 29:20.   write request pending cycle number  to inc urgent level if not granted.
  //bit 19.      axi0 default urgent control : 1 use AWUGT/ARUGT pins in the port. 0 : use bit[15:14] of this register..
  //bit 18.      force this channel all request to be super urgent request.
  //bit 17.      force this channel all request to be urgent request.
  //bit 16.      force this channel all request to be non urgent request.
  //bit 15:14    axi1 default urgent level.
  //bit 13:4.    read request pending cycle number  to inc urgent level if not granted.
  //bit 3:0      canvas arbiter arbiter weight
#define DMC_AXI2_HOLD_CTRL                         ((0x00c5  << 2) + 0xff638000)
    //31:24 write hold num.   max outstanding request number.
    //23:16  write hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.
    //15:8 read hold num.   max outstanding request number.
    //7:0  read hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.

#define DMC_AXI3_CHAN_CTRL                         ((0x00ce  << 2) + 0xff638000)
  //bit 31       enable to incr 2 urgent levels if the pending cycles is doubled.
  //bit 30.   Not used.
  //bit 29:20.   write request pending cycle number  to inc urgent level if not granted.
  //bit 19.      axi0 default urgent control : 1 use AWUGT/ARUGT pins in the port. 0 : use bit[15:14] of this register..
  //bit 18.      force this channel all request to be super urgent request.
  //bit 17.      force this channel all request to be urgent request.
  //bit 16.      force this channel all request to be non urgent request.
  //bit 15:14    axi1 default urgent level.
  //bit 13:4.    read request pending cycle number  to inc urgent level if not granted.
  //bit 3:0      canvas arbiter arbiter weight
#define DMC_AXI3_HOLD_CTRL                         ((0x00cf  << 2) + 0xff638000)
    //31:24 write hold num.   max outstanding request number.
    //23:16  write hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.
    //15:8 read hold num.   max outstanding request number.
    //7:0  read hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.

#define DMC_AXI4_CHAN_CTRL                         ((0x00d8  << 2) + 0xff638000)
  //bit 31       enable to incr 2 urgent levels if the pending cycles is doubled.
  //bit 30.   Not used.
  //bit 29:20.   write request pending cycle number  to inc urgent level if not granted.
  //bit 19.      axi0 default urgent control : 1 use AWUGT/ARUGT pins in the port. 0 : use bit[15:14] of this register..
  //bit 18.      force this channel all request to be super urgent request.
  //bit 17.      force this channel all request to be urgent request.
  //bit 16.      force this channel all request to be non urgent request.
  //bit 15:14    axi1 default urgent level.
  //bit 13:4.    read request pending cycle number  to inc urgent level if not granted.
  //bit 3:0      canvas arbiter arbiter weight
#define DMC_AXI4_HOLD_CTRL                         ((0x00d9  << 2) + 0xff638000)
    //31:24 write hold num.   max outstanding request number.
    //23:16  write hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.
    //15:8 read hold num.   max outstanding request number.
    //7:0  read hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.


#define DMC_AXI5_CHAN_CTRL                         ((0x00e2  << 2) + 0xff638000)
  //bit 31       enable to incr 2 urgent levels if the pending cycles is doubled.
  //bit 30.   Not used.
  //bit 29:20.   write request pending cycle number  to inc urgent level if not granted.
  //bit 19.      axi0 default urgent control : 1 use AWUGT/ARUGT pins in the port. 0 : use bit[15:14] of this register..
  //bit 18.      force this channel all request to be super urgent request.
  //bit 17.      force this channel all request to be urgent request.
  //bit 16.      force this channel all request to be non urgent request.
  //bit 15:14    axi1 default urgent level.
  //bit 13:4.    read request pending cycle number  to inc urgent level if not granted.
  //bit 3:0      canvas arbiter arbiter weight
#define DMC_AXI5_HOLD_CTRL                         ((0x00e3  << 2) + 0xff638000)
    //31:24 write hold num.   max outstanding request number.
    //23:16  write hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.
    //15:8 read hold num.   max outstanding request number.
    //7:0  read hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.


#define DMC_AXI6_CHAN_CTRL                         ((0x00ec  << 2) + 0xff638000)
  //bit 31       enable to incr 2 urgent levels if the pending cycles is doubled.
  //bit 30.   Not used.
  //bit 29:20.   write request pending cycle number  to inc urgent level if not granted.
  //bit 19.      axi0 default urgent control : 1 use AWUGT/ARUGT pins in the port. 0 : use bit[15:14] of this register..
  //bit 18.      force this channel all request to be super urgent request.
  //bit 17.      force this channel all request to be urgent request.
  //bit 16.      force this channel all request to be non urgent request.
  //bit 15:14    axi1 default urgent level.
  //bit 13:4.    read request pending cycle number  to inc urgent level if not granted.
  //bit 3:0      canvas arbiter arbiter weight
#define DMC_AXI6_HOLD_CTRL                         ((0x00ed  << 2) + 0xff638000)
    //31:24 write hold num.   max outstanding request number.
    //23:16  write hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.
    //15:8 read hold num.   max outstanding request number.
    //7:0  read hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.

#define DMC_AXI7_CHAN_CTRL                         ((0x00f6  << 2) + 0xff638000)
  //bit 31       enable to incr 2 urgent levels if the pending cycles is doubled.
  //bit 30.   Not used.
  //bit 29:20.   write request pending cycle number  to inc urgent level if not granted.
  //bit 19.      axi0 default urgent control : 1 use AWUGT/ARUGT pins in the port. 0 : use bit[15:14] of this register..
  //bit 18.      force this channel all request to be super urgent request.
  //bit 17.      force this channel all request to be urgent request.
  //bit 16.      force this channel all request to be non urgent request.
  //bit 15:14    axi1 default urgent level.
  //bit 13:4.    read request pending cycle number  to inc urgent level if not granted.
  //bit 3:0      canvas arbiter arbiter weight
#define DMC_AXI7_HOLD_CTRL                         ((0x00f7  << 2) + 0xff638000)
    //31:24 write hold num.   max outstanding request number.
    //23:16  write hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.
    //15:8 read hold num.   max outstanding request number.
    //7:0  read hold release num. if the outstanding request == hold num, then hold this request unless the outstanding request number bellow the hold release number, then continue to request.
//
// Closing file:  ../mmc/dmc/rtl/dmc_reg.vh
//
//
// Reading file:  ../mmc/dmc/rtl/dmc_sec.vh
//
// -----------------------------------------------
// REG_BASE:  DMC_SEC_REG_BASE = 0xff638800
// -----------------------------------------------
#define DMC_SEC_CTRL                               ((0x0000  << 2) + 0xff638800)
  //bit 31.  write 1 to update the security range register to be used.
  //security range defination have to be atom option.  all the range controll register  will be shadowed.


//DMC use 14bits ID to identify the input ports and ID.
// bit 13:10.
// 0 : ARM.
// 1 : Mali 0.
// 2 : Mali 1.
// 3 : HDMI.
// 4 : HEVC.
// 5 : TEST.
// 6 : USB
// 7:  Device.
// 8:  VPU read 0.
// 9:  VPU read 1.
// 10: VPU read 1.
// 11: VPU write 0.
// 12: VPU write 1.
// 13: VDEC.
// 14: HCODEC.
// 15: ge2d.

//ID[9:6].
// ARM   : input ID bits[7:4].
// Mali0 : input ID bits[7:4].
// Mali1 : input ID bits[7:4].
// HDMI  : {2'h0,input ID bit}.
// HEVC  : input ID bits[7:4].   // the higher 3 bits for HEVC sub ports. the lower 1 bits to differentiate IMEM and LMEM for HEVC CPU sub ports.
// Device :   input ID bits [7:4].  Device arb sub port ID.
// USB    :   input ID bits [7:4].
// VPU_RD0 :  input ID bits[3:0].   VPU read clients ID.
// VPU_RD1 :  input ID bits[3:0].   VPU read clients ID.
// VPU_RD2 :  input ID bits[3:0].   VPU read clients ID.
// VPU_WR0 :  input ID bits[3:0].   VPU write clients ID.
// VPU_WR1 :  input ID bits[3:0].   VPU write clients ID.
// VDEC    :  input ID bits[5:2].   vdec SUB CLIENTS ID.
// HCODEC  :  input ID bits[5:2].   vdec SUB CLIENTS ID.
// GE2d    :  READ:  {3'b0, read input id}. Write: 4'h2.

//ID bits[5:2].
//ARM.  input ID [3:0].
//MALI 0. input ID[3:0].
//MALI 1. input ID[3:0].
//HDMI.   4'h0.
//HEVC.   input ID[3:0].
//USB.    input ID[3:0].
//DEVICE. {2'b00, input ID bits[3:2]}
//VPU RD0 : {input ID bits[7:4], input ID bits[7]}.
//VPU RD1 : {input ID bits[7:4], input ID bits[7]}.
//VPU RD2 : {input ID bits[7:4], input ID bits[7]}.
//VPU WR0 : {input ID bits[7:4], input ID bits[7]}.
//VPU WR1 : {input ID bits[7:4], input ID bits[7]}.
//VDEC    : 4'h0
//HCODEC  : 4'h0
//GE2D    : 4'h0.

//ID bits[1:0]  ID bits[1:0] is specical used for blkmv as the security control. and for VDEC/HCODEC, this bit won't be treated as the read reorder function.
//ARM    : 2'b00.
//MALI 0 : 2'b00.
//MALI 1 : 2'b00.
//HDMI   : 2'b00.
//HEVC   : 2'b00.
//USB    : 2'b00.
//DEVICE.  input ID bits[1:0]
//VPU RD0 : 2'b0
//VPU RD1 : 2'b0
//VPU RD2 : 2'b0
//VPU WR0 : 2'b0
//VPU WR1 : 2'b0
//VDEC    : input bits[1:0]
//HCODEC  : input bits[1:0]
//GE2D    : 2'b0.


#define DMC_SEC_RANGE0_CTRL                        ((0x0001  << 2) + 0xff638800)
  //bit 31:16   :   range 0 end address  higher 16bits.
  //bit 15:0    :   range 0 start address higher 16bits.
#define DMC_SEC_RANGE1_CTRL                        ((0x0002  << 2) + 0xff638800)
  //bit 31:16   :   range 1 end address  higher 16bits.
  //bit 15:0    :   range 1 start address higher 16bits.
#define DMC_SEC_RANGE2_CTRL                        ((0x0003  << 2) + 0xff638800)
  //bit 31:16   :   range 2 end address  higher 16bits.
  //bit 15:0    :   range 2 start address higher 16bits.
#define DMC_SEC_RANGE3_CTRL                        ((0x0004  << 2) + 0xff638800)
  //bit 31:16   :   range 3 end address  higher 16bits.
  //bit 15:0    :   range 3 start address higher 16bits.
#define DMC_SEC_RANGE4_CTRL                        ((0x0005  << 2) + 0xff638800)
  //bit 31:16   :   range 4 end address  higher 16bits.
  //bit 15:0    :   range 4 start address higher 16bits.
#define DMC_SEC_RANGE5_CTRL                        ((0x0006  << 2) + 0xff638800)
  //bit 31:16   :   range 5 end address  higher 16bits.
  //bit 15:0    :   range 5 start address higher 16bits.
#define DMC_SEC_RANGE_CTRL                         ((0x0007  << 2) + 0xff638800)
  //bit 31:7   :  not used
  //bit 6 :  default range security level.     1 : secure region. 0 : non secure region.
  //bit 5 :  range 5 security level. 1 : secure region. 0 : non secure region.
  //bit 4 :  range 4 security level. 1 : secure region. 0 : non secure region.
  //bit 3 :  range 3 security level. 1 : secure region. 0 : non secure region.
  //bit 2 :  range 2 security level. 1 : secure region. 0 : non secure region.
  //bit 1 :  range 1 security level. 1 : secure region. 0 : non secure region.
  //bit 0 :  range 0 security level. 1 : secure region. 0 : non secure region.

#define DMC_SEC_AXI_PORT_CTRL                      ((0x000e  << 2) + 0xff638800)
  //bit 31~30.   not used.
  //bit 29~28. AXI port6 (USB )  secure region write access enable bit. 1: enable. 0 : disable.
  //bit 27~24.  not used.
  //bit 23. AXI port3 (HDCP )  secure region write access enable bit. 1: enable. 0 : disable.
  //bit 22. AXI port3 (HDCP )  non secure region write access enable bit.  1: enable.  0 : disable.
  //bit 21. AXI port2 (Mali 1) secure region write access enable bit. 1: enable. 0 : disable.
  //bit 20. AXI port2 (Mali 1) non secure region write access enable bit.  1: enable.  0 : disable.
  //bit 19. AXI port1 (Mali 0) secure region write access enable bit. 1: enable. 0 : disable.
  //bit 18. AXI port1 (Mali 0) non secure region write access enable bit.  1: enable.  0 : disable.
  //bit 17. AXI port0 (CPU)    secure region write access enable bit. 1: enable. 0 : disable.
  //bit 16. AXI port0 (CPU)    non secure region write access enable bit.  1: enable.  0 : disable.
  //bit 15~14.   not used. //dev
  //bit 13~12.   AXI port6 (USB )  secure region read access enable bit. 1: enable. 0 : disable.
  //bit 12~8.   not used. //dev
  //bit 7. AXI port3 (HDCP )  secure region read access enable bit. 1: enable. 0 : disable.
  //bit 6. AXI port3 (HDCP )  non secure region read access enable bit.  1: enable.  0 : disable.
  //bit 5. AXI port2 (Mali 1) secure region read access enable bit. 1: enable. 0 : disable.
  //bit 4. AXI port2 (Mali 1) non secure region read access enable bit.  1: enable.  0 : disable.
  //bit 3. AXI port1 (Mali 0) secure region read access enable bit. 1: enable. 0 : disable.
  //bit 2. AXI port1 (Mali 0) non secure region read access enable bit.  1: enable.  0 : disable.
  //bit 1. AXI port0 (CPU)    secure region read access enable bit. 1: enable. 0 : disable.
  //bit 0. AXI port0 (CPU)    non secure region read access enable bit.  1: enable.  0 : disable.

#define DMC_VDEC_SEC_READ_CTRL                     ((0x0010  << 2) + 0xff638800)
  //bit 31.  VDEC subID14 ( not used  )      secure region read access enable bit. 1: enable. 0 : disable.
  //bit 30.  VDEC subID14 ( not used )  non secure region read access enable bit. 1: enable. 0 : disable.
  //bit 29.  VDEC subID14 ( not used  )      secure region read access enable bit. 1: enable. 0 : disable.
  //bit 28.  VDEC subID14 ( not used )  non secure region read access enable bit. 1: enable. 0 : disable.
  //bit 27.  VDEC subID13 ( not used  )      secure region read access enable bit. 1: enable. 0 : disable.
  //bit 26.  VDEC subID13 ( not used )  non secure region read access enable bit. 1: enable. 0 : disable.
  //bit 25.  VDEC subID12 ( not used  )      secure region read access enable bit. 1: enable. 0 : disable.
  //bit 24.  VDEC subID12 ( not used )  non secure region read access enable bit. 1: enable. 0 : disable.
  //bit 23.  VDEC subID11 ( not used  )      secure region read access enable bit. 1: enable. 0 : disable.
  //bit 22.  VDEC subID11 ( not used )  non secure region read access enable bit. 1: enable. 0 : disable.
  //bit 21.  VDEC subID10 ( mbbot )      secure region read access enable bit. 1: enable. 0 : disable.
  //bit 20.  VDEC subID10 ( mbbot )  non secure region read access enable bit. 1: enable. 0 : disable.
  //bit 19.  VDEC subID9 ( not used.)      secure region read access enable bit. 1: enable. 0 : disable.
  //bit 18.  VDEC subID9 ( not used)  non secure region read access enable bit. 1: enable. 0 : disable.
  //bit 17.  VDEC subID8 ( not used.)      secure region read access enable bit. 1: enable. 0 : disable.
  //bit 16.  VDEC subID8 ( not used)  non secure region read access enable bit. 1: enable. 0 : disable.
  //bit 15.  VDEC subID7 (dw)      secure region read access enable bit. 1: enable. 0 : disable.
  //bit 14.  VDEC subID7 (dw)  non secure region read access enable bit. 1: enable. 0 : disable.
  //bit 13.  VDEC subID6 (comb)      secure region read access enable bit. 1: enable. 0 : disable.
  //bit 12.  VDEC subID6 (comb)  non secure region read access enable bit. 1: enable. 0 : disable.
  //bit 11.  VDEC subID5 (lmem)      secure region read access enable bit. 1: enable. 0 : disable.
  //bit 10.  VDEC subID5 (lmem)  non secure region read access enable bit. 1: enable. 0 : disable.
  //bit 9.   VDEC subID4 (imem)      secure region read access enable bit. 1: enable. 0 : disable.
  //bit 8.   VDEC subID4 (imem)  non secure region read access enable bit. 1: enable. 0 : disable.
  //bit 7.   VDEC subID3 (picdc)      secure region read access enable bit. 1: enable. 0 : disable.
  //bit 6.   VDEC subID3 (picdc)  non secure region read access enable bit. 1: enable. 0 : disable.
  //bit 5.   VDEC subID2 (psc)      secure region read access enable bit. 1: enable. 0 : disable.
  //bit 4.   VDEC subID2 (psc)  non secure region read access enable bit. 1: enable. 0 : disable.
  //bit 3.   VDEC subID1 (dcac)     secure region read access enable bit. 1: enable. 0 : disable.
  //bit 2.   VDEC subID1 (dcac) non secure region read access enable bit. 1: enable. 0 : disable.
  //bit 1.   VDEC subID0 (vld)      secure region read access enable bit. 1: enable. 0 : disable.
  //bit 0.   VDEC subID0 (vld)  non secure region read access enable bit. 1: enable. 0 : disable.
#define DMC_VDEC_SEC_WRITE_CTRL                    ((0x0011  << 2) + 0xff638800)
  //bit 31.  VDEC subID14 ( not used  )      secure region write access enable bit. 1: enable. 0 : disable.
  //bit 30.  VDEC subID14 ( not used )  non secure region write access enable bit. 1: enable. 0 : disable.
  //bit 29.  VDEC subID14 ( not used  )      secure region write access enable bit. 1: enable. 0 : disable.
  //bit 28.  VDEC subID14 ( not used )  non secure region write access enable bit. 1: enable. 0 : disable.
  //bit 27.  VDEC subID13 ( not used  )      secure region write access enable bit. 1: enable. 0 : disable.
  //bit 26.  VDEC subID13 ( not used )  non secure region write access enable bit. 1: enable. 0 : disable.
  //bit 25.  VDEC subID12 ( not used  )      secure region write access enable bit. 1: enable. 0 : disable.
  //bit 24.  VDEC subID12 ( not used )  non secure region write access enable bit. 1: enable. 0 : disable.
  //bit 23.  VDEC subID11 ( not used  )      secure region write access enable bit. 1: enable. 0 : disable.
  //bit 22.  VDEC subID11 ( not used )  non secure region write access enable bit. 1: enable. 0 : disable.
  //bit 21.  VDEC subID10 ( mbbot )      secure region write access enable bit. 1: enable. 0 : disable.
  //bit 20.  VDEC subID10 ( mbbot )  non secure region write access enable bit. 1: enable. 0 : disable.
  //bit 19.  VDEC subID9 ( not used.)      secure region write access enable bit. 1: enable. 0 : disable.
  //bit 18.  VDEC subID9 ( not used)  non secure region write access enable bit. 1: enable. 0 : disable.
  //bit 17.  VDEC subID8 ( not used.)      secure region write access enable bit. 1: enable. 0 : disable.
  //bit 16.  VDEC subID8 ( not used)  non secure region write access enable bit. 1: enable. 0 : disable.
  //bit 15.  VDEC subID7 (dw)      secure region write access enable bit. 1: enable. 0 : disable.
  //bit 14.  VDEC subID7 (dw)  non secure region write access enable bit. 1: enable. 0 : disable.
  //bit 13.  VDEC subID6 (comb)      secure region write access enable bit. 1: enable. 0 : disable.
  //bit 12.  VDEC subID6 (comb)  non secure region write access enable bit. 1: enable. 0 : disable.
  //bit 11.  VDEC subID5 (lmem)      secure region write access enable bit. 1: enable. 0 : disable.
  //bit 10.  VDEC subID5 (lmem)  non secure region write access enable bit. 1: enable. 0 : disable.
  //bit 9.   VDEC subID4 (imem)      secure region write access enable bit. 1: enable. 0 : disable.
  //bit 8.   VDEC subID4 (imem)  non secure region write access enable bit. 1: enable. 0 : disable.
  //bit 7.   VDEC subID3 (picdc)      secure region write access enable bit. 1: enable. 0 : disable.
  //bit 6.   VDEC subID3 (picdc)  non secure region write access enable bit. 1: enable. 0 : disable.
  //bit 5.   VDEC subID2 (psc)      secure region write access enable bit. 1: enable. 0 : disable.
  //bit 4.   VDEC subID2 (psc)  non secure region write access enable bit. 1: enable. 0 : disable.
  //bit 3.   VDEC subID1 (dcac)     secure region write access enable bit. 1: enable. 0 : disable.
  //bit 2.   VDEC subID1 (dcac) non secure region write access enable bit. 1: enable. 0 : disable.
  //bit 1.   VDEC subID0 (vld)      secure region write access enable bit. 1: enable. 0 : disable.
  //bit 0.   VDEC subID0 (vld)  non secure region write access enable bit. 1: enable. 0 : disable.
#define DMC_VDEC_SEC_CFG                           ((0x0012  << 2) + 0xff638800)
 //DWC_VDEC_SEC_READ_CTRL and DMC_VDEC_SEC_WRITE_CTRL register APB bus configuation enable.  2 bit for each port.  one for read, one for write.
  //bit 31.  VDEC subID15 ()  To enable APB bus modifiy the write security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 30.  VDEC subID14 ()  To enable APB bus modifiy the write security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 29.  VDEC subID13 ()  To enable APB bus modifiy the write security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 28.  VDEC subID12 ()  To enable APB bus modifiy the write security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 27.  VDEC subID11 ()  To enable APB bus modifiy the write security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 26.  VDEC subID10 (mbbot)  To enable APB bus modifiy the write security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 25.   VDEC subID9 ()        To enable APB bus modifiy the write security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 24.   VDEC subID8 ()        To enable APB bus modifiy the write security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 23.   VDEC subID7 (dw)      To enable APB bus modifiy the write security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 22.   VDEC subID6 (comb)    To enable APB bus modifiy the write security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 21.   VDEC subID5 (lmem)    To enable APB bus modifiy the write security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 20.   VDEC subID4 (imem)    To enable APB bus modifiy the write security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 19.   VDEC subID3 (picdc)   To enable APB bus modifiy the write security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 18.   VDEC subID2 (psc)     To enable APB bus modifiy the write security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 17.   VDEC subID1 (dcac)    To enable APB bus modifiy the write security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 16.   VDEC subID0 (vld)     To enable APB bus modifiy the write security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 15.  VDEC subID15 ()  To enable APB bus modifiy the read security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 14.  VDEC subID14 ()  To enable APB bus modifiy the read security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 13.  VDEC subID13 ()  To enable APB bus modifiy the read security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 12.  VDEC subID12 ()  To enable APB bus modifiy the read security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 11.  VDEC subID11 ()  To enable APB bus modifiy the read security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 10.  VDEC subID10 (mbbot)  To enable APB bus modifiy the read security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 9.   VDEC subID9 ()        To enable APB bus modifiy the read security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 8.   VDEC subID8 ()        To enable APB bus modifiy the read security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 7.   VDEC subID7 (dw)      To enable APB bus modifiy the read security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 6.   VDEC subID6 (comb)    To enable APB bus modifiy the read security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 5.   VDEC subID5 (lmem)    To enable APB bus modifiy the read security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 4.   VDEC subID4 (imem)    To enable APB bus modifiy the read security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 3.   VDEC subID3 (picdc)   To enable APB bus modifiy the read security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 2.   VDEC subID2 (psc)     To enable APB bus modifiy the read security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 1.   VDEC subID1 (dcac)    To enable APB bus modifiy the read security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.
  //bit 0.   VDEC subID0 (vld)     To enable APB bus modifiy the read security control bits. 1 : eable the APB modify. 0 : disable APB bus modify.

#define DMC_VDEC_EF_TRIG_CTRL                      ((0x0013  << 2) + 0xff638800)
  // VDEC Electronic fence trigger selection and trigger secure type.  1 bit for trigger select for one read port. 1 bit for trigger type for one read port.
  //Electronic would be triggered by the read from  defined secure level from selected subIDs.
  //bit 31.   trigger type selection for subID15 ().  1 = secure access. 0 : non secure access.
  //bit 30.   trigger type selection for subID14 ().  1 = secure access. 0 : non secure access.
  //bit 29.   trigger type selection for subID13 ().  1 = secure access. 0 : non secure access.
  //bit 28.   trigger type selection for subID12 ().  1 = secure access. 0 : non secure access.
  //bit 27.   trigger type selection for subID11 ().  1 = secure access. 0 : non secure access.
  //bit 26.   trigger type selection for subID10 ().  1 = secure access. 0 : non secure access.
  //bit 25.   trigger type selection for subID9 ().  1 = secure access. 0 : non secure access.
  //bit 24.   trigger type selection for subID8 ().  1 = secure access. 0 : non secure access.
  //bit 23.   trigger type selection for subID7 (dw).  1 = secure access. 0 : non secure access.
  //bit 22.   trigger type selection for subID6 (comb).  1 = secure access. 0 : non secure access.
  //bit 21.   trigger type selection for subID5 (lmem).  1 = secure access. 0 : non secure access.
  //bit 20.   trigger type selection for subID4 (imem).  1 = secure access. 0 : non secure access.
  //bit 19.   trigger type selection for subID3 (picdc).  1 = secure access. 0 : non secure access.
  //bit 18.   trigger type selection for subID2 (psc).  1 = secure access. 0 : non secure access.
  //bit 17.   trigger type selection for subID1 (dcac).  1 = secure access. 0 : non secure access.
  //bit 16.   trigger type selection for subID0 (vld).  1 = secure access. 0 : non secure access.
  //bit 15.   trigger source selection for subID15 ().  1 = selected. 0 : not selected.
  //bit 14.   trigger source selection for subID14 ().  1 = selected. 0 : not selected.
  //bit 13.   trigger source selection for subID13 ().  1 = selected. 0 : not selected.
  //bit 12.   trigger source selection for subID12 ().  1 = selected. 0 : not selected.
  //bit 11.   trigger source selection for subID11 ().  1 = selected. 0 : not selected.
  //bit 10.   trigger source selection for subID10 ().  1 = selected. 0 : not selected.
  //bit 9.    trigger source selection for subID9 ().  1 = selected. 0 : not selected.
  //bit 8.    trigger source selection for subID8 ().  1 = selected. 0 : not selected.
  //bit 7.    trigger source selection for subID7 (dw).  1 = selected. 0 : not selected.
  //bit 6.    trigger source selection for subID6 (comb).  1 = selected. 0 : not selected.
  //bit 5.    trigger source selection for subID5 (lmem).  1 = selected. 0 : not selected.
  //bit 4.    trigger source selection for subID4 (imem).  1 = selected. 0 : not selected.
  //bit 3.    trigger source selection for subID3 (picdc).  1 = selected. 0 : not selected.
  //bit 2.    trigger source selection for subID2 (psc).  1 = selected. 0 : not selected.
  //bit 1.    trigger source selection for subID1 (dcac).  1 = selected. 0 : not selected.
  //bit 0.    trigger source selection for subID0 (vld).  1 = selected. 0 : not selected.

#define DMC_VDEC_EF_PROT                           ((0x0014  << 2) + 0xff638800)
  //to define which subID would be affected if the EF got triggered.
  //bit 31.   EF would affect subID15 () write access secure control.  1 = selected. 0 : not selected.
  //bit 30.   EF would affect subID14 () write access secure control.  1 = selected. 0 : not selected.
  //bit 29.   EF would affect subID13 () write access secure control.  1 = selected. 0 : not selected.
  //bit 28.   EF would affect subID12 () write access secure control.  1 = selected. 0 : not selected.
  //bit 27.   EF would affect subID11 () write access secure control.  1 = selected. 0 : not selected.
  //bit 26.   EF would affect subID10 () write access secure control.  1 = selected. 0 : not selected.
  //bit 25.    EF would affect subID9 () write access secure control.  1 = selected. 0 : not selected.
  //bit 24.    EF would affect subID8 () write access secure control.  1 = selected. 0 : not selected.
  //bit 23.    EF would affect subID7 (dw) write access secure control.  1 = selected. 0 : not selected.
  //bit 22.    EF would affect subID6 (comb) write access secure control.  1 = selected. 0 : not selected.
  //bit 21.    EF would affect subID5 (lmem) write access secure control.  1 = selected. 0 : not selected.
  //bit 20.    EF would affect subID4 (imem) write access secure control.  1 = selected. 0 : not selected.
  //bit 19.    EF would affect subID3 (picdc) write access secure control.  1 = selected. 0 : not selected.
  //bit 18.    EF would affect subID2 (psc) write access secure control.  1 = selected. 0 : not selected.
  //bit 17.    EF would affect subID1 (dcac) write access secure control.  1 = selected. 0 : not selected.
  //bit 16.    EF would affect subID0 (vld) write access secure control.  1 = selected. 0 : not selected.
  //bit 15.   EF would affect subID15 () read access secure control.  1 = selected. 0 : not selected.
  //bit 14.   EF would affect subID14 () read access secure control.  1 = selected. 0 : not selected.
  //bit 13.   EF would affect subID13 () read access secure control.  1 = selected. 0 : not selected.
  //bit 12.   EF would affect subID12 () read access secure control.  1 = selected. 0 : not selected.
  //bit 11.   EF would affect subID11 () read access secure control.  1 = selected. 0 : not selected.
  //bit 10.   EF would affect subID10 () read access secure control.  1 = selected. 0 : not selected.
  //bit 9.    EF would affect subID9 () read access secure control.  1 = selected. 0 : not selected.
  //bit 8.    EF would affect subID8 () read access secure control.  1 = selected. 0 : not selected.
  //bit 7.    EF would affect subID7 (dw) read access secure control.  1 = selected. 0 : not selected.
  //bit 6.    EF would affect subID6 (comb) read access secure control.  1 = selected. 0 : not selected.
  //bit 5.    EF would affect subID5 (lmem) read access secure control.  1 = selected. 0 : not selected.
  //bit 4.    EF would affect subID4 (imem) read access secure control.  1 = selected. 0 : not selected.
  //bit 3.    EF would affect subID3 (picdc) read access secure control.  1 = selected. 0 : not selected.
  //bit 2.    EF would affect subID2 (psc) read access secure control.  1 = selected. 0 : not selected.
  //bit 1.    EF would affect subID1 (dcac) read access secure control.  1 = selected. 0 : not selected.
  //bit 0.    EF would affect subID0 (vld) read access secure control.  1 = selected. 0 : not selected.
#define DMC_VDEC_EF_READ                           ((0x0015  << 2) + 0xff638800)
  //this register contains the vdec read security control bits after the EF got triggered.
  //if the DMC_VDEC_EF_PROT register bit 15:0 related bit was enable,  then the related secure control bits would be copied to DMC_VDEC_SEC_READ_CTRL related bits.

#define DMC_VDEC_EF_WRITE                          ((0x0016  << 2) + 0xff638800)
  //this register contains the vdec write security control bits after the EF got triggered.
  //if the DMC_VDEC_EF_PROT register bit 15:0 related bit was enable,  then the related secure control bits would be copied to DMC_VDEC_SEC_READ_CTRL related bits.

 //HCODEC security and Electronic fence is same as VDEC with different SUBID define..
  //subID15:13 :  not used.
  //subID12 :  ME.
  //subID11 : mfdin
  //subID10 : mcmbot
  //subID9  : i_pred.
  //subID8  : qdct
  //subID7  : vlc
  //subID6  : comb
  //subID5  : LMEM
  //subID4  : IMEM.
  //subID3  : mcrcc
  //subID2  : PSC
  //subID1  : dcac
  //subID0  : vld
#define DMC_HCODEC_SEC_READ_CTRL                   ((0x0017  << 2) + 0xff638800)
 //each subID with 2bits. one for secure region. one for unsecure region.

#define DMC_HCODEC_SEC_WRITE_CTRL                  ((0x0018  << 2) + 0xff638800)
 //each subID with 2bits. one for secure region. one for unsecure region.

#define DMC_HCODEC_SEC_CFG                         ((0x0019  << 2) + 0xff638800)
 //DWC_HCODEC_SEC_READ_CTRL and DMC_HCODEC_SEC_WRITE_CTRL register APB bus configuation enable.  2 bit for each port.  one for read, one for write.

#define DMC_HCODEC_EF_TRIG_CTRL                    ((0x001a  << 2) + 0xff638800)
  // HCODEC Electronic fence trigger selection and trigger secure type.  1 bit for trigger select for one read port. 1 bit for trigger type for one read port.

#define DMC_HCODEC_EF_PROT                         ((0x001b  << 2) + 0xff638800)
  // HCODEC EF protected access control.  each subID 2 bits. one for read one for write.
#define DMC_HCODEC_EF_READ                         ((0x001c  << 2) + 0xff638800)
  //the DWC_HCODEC_SEC_READ_CTRL value need to be changed after HCODEC EF fence triggered. once the trigger happens, the DMC_HCODEC_EF_PROT[15:0] bit enabled subIDs value will be copied to   DWC_HCODEC_SEC_READ_CTRL register.
#define DMC_HCODEC_EF_WRITE                        ((0x001d  << 2) + 0xff638800)
  //the DWC_HCODEC_SEC_WRITE_CTRL value need to be changed after HCODEC EF fence triggered. once the trigger happens, the DMC_HCODEC_EF_PROT[31:16] bit enabled subIDs value will be copied to   DWC_HCODEC_SEC_WRITE_CTRL register.

//HEVC security and electronic fence control is similar with VDEC/HCODE.  only difference is in HEVC, the LMEM/IMEM are shared in one SUBID. so we need to have seperate seting for them.
  //subID 7 : mpred.
  //subID 6 : dblk_d
  //subID 5 : dblk_p
  //subID 4 : ipp
  //subID 3 : mpp
  //subID 2 : SAO
  //subID 1 : stream.
  //subID 0 : AMRISC CPU.  include IMEM and LMEM.  AR/WID[3:0] == 0 IMEM.  LMEM.
  //HEVC ID 7.  [6:4] for subID.
#define DMC_HEVC_SEC_READ_CTRL                     ((0x001e  << 2) + 0xff638800)
   //bit 31. DOS VDEC decoder use HEVC logic. 1: HEVC and VDEC EF are shared. 0: HEVC and VDEC EF is separated.
   //bit 30:18. not used.
   //bit 17. READ secure area eable bit for HEVC subID0 CPU with IDbits 3:0 != 4'h0 read access.      1 : enable. 0 : disable.
   //bit 16. READ non secure area eable bit for HEVC subID 0 CPU with IDbits 3:0 != 4'h0 read access.  1 : enable. 0 : disable.
   //bit 15. READ secure area eable bit for HEVC subID 7 mpred read access.      1 : enable. 0 : disable.
   //bit 14. READ non secure area eable bit for HEVC subID 7  mpred read access.  1 : enable. 0 : disable.
   //bit 13. READ secure area eable bit for HEVC subID 6 dblk_d read access.      1 : enable. 0 : disable.
   //bit 12. READ non secure area eable bit for HEVC subID 6  dblk_d read access.  1 : enable. 0 : disable.
   //bit 11. READ secure area eable bit for HEVC subID 5 dblk_p read access.      1 : enable. 0 : disable.
   //bit 10. READ non secure area eable bit for HEVC subID 5  dblk_p read access.  1 : enable. 0 : disable.
   //bit 9.  READ secure area eable bit for HEVC subID 4 ipp read access.      1 : enable. 0 : disable.
   //bit 8.  READ non secure area eable bit for HEVC subID 4  ipp read access.  1 : enable. 0 : disable.
   //bit 7.  READ secure area eable bit for HEVC subID 3 mpp read access.      1 : enable. 0 : disable.
   //bit 6.  READ non secure area eable bit for HEVC subID 3  mpp read access.  1 : enable. 0 : disable.
   //bit 5.  READ secure area eable bit for HEVC subID 2 SAO read access.      1 : enable. 0 : disable.
   //bit 4.  READ non secure area eable bit for HEVC subID 2  SAO read access.  1 : enable. 0 : disable.
   //bit 3.  READ secure area eable bit for HEVCsubID 1  stream read access.      1 : enable. 0 : disable.
   //bit 2.  READ non secure area eable bit for HEVC subID 1  stream read access.  1 : enable. 0 : disable.
   //bit 1.  READ secure area eable bit for HEVC CPU access with ID bit 3:0 = 4'h0.  1 : enable. 0 : disable.
   //bit 0.  READ non secure area eable bit for HEVC CPU access with ID bit 3:0 = 4'h0.  1 : enable. 0 : disable.

#define DMC_HEVC_SEC_WRITE_CTRL                    ((0x001f  << 2) + 0xff638800)
   //bit 31:18. not used.
   //bit 17. WRITE secure area eable bit for HEVC subID0 CPU with IDbits[7:4] == 4'h1 write access.      1 : enable. 0 : disable.
   //bit 16. WRITE non secure area eable bit for HEVC subID 0 CPU IDbits[7:4] == 4'h1 write access.  1 : enable. 0 : disable.
   //bit 15. WRITE secure area eable bit for HEVC subID  [7:5] ==7 mpred write access.      1 : enable. 0 : disable.
   //bit 14. WRITE non secure area eable bit for HEVC subID 7  mpred write access.  1 : enable. 0 : disable.
   //bit 13. WRITE secure area eable bit for HEVC subID [7:5] == 6 dblk_d write access.      1 : enable. 0 : disable.
   //bit 12. WRITE non secure area eable bit for HEVC subID [7:5] == 6  dblk_d write access.  1 : enable. 0 : disable.
   //bit 11. WRITE secure area eable bit for HEVC subID [7:5] == 5 dblk_p write access.      1 : enable. 0 : disable.
   //bit 10. WRITE non secure area eable bit for HEVC subID [7:5] == 5  dblk_p write access.  1 : enable. 0 : disable.
   //bit 9.  WRITE secure area eable bit for HEVC subID [7:5] == 4 ipp write access.      1 : enable. 0 : disable.
   //bit 8.  WRITE non secure area eable bit for HEVC subID [7:5] == 4  ipp write access.  1 : enable. 0 : disable.
   //bit 7.  WRITE secure area eable bit for HEVC subID [7:5] == 3 mpp write access.      1 : enable. 0 : disable.
   //bit 6.  WRITE non secure area eable bit for HEVC subID [7:5] == 3  mpp write access.  1 : enable. 0 : disable.
   //bit 5.  WRITE secure area eable bit for HEVC subID [7:5] == 2 SAO write access.      1 : enable. 0 : disable.
   //bit 4.  WRITE non secure area eable bit for HEVC subID 2  SAO write access.  1 : enable. 0 : disable.
   //bit 3.  WRITE secure area eable bit for HEVCsubID [7:5] == 1  stream write access.      1 : enable. 0 : disable.
   //bit 2.  WRITE non secure area eable bit for HEVC subID [7:5] == 1  stream write access.  1 : enable. 0 : disable.
   //bit 1.  WRITE secure area eable bit for HEVC CPU access with ID bit 7 :4 = 4'h0.  1 : enable. 0 : disable.
   //bit 0.  WRITE non secure area eable bit for HEVC CPU access with ID bit 7:4 = 4'h0.  1 : enable. 0 : disable.

#define DMC_HEVC_SEC_CFG                           ((0x0020  << 2) + 0xff638800)
  //24:16  9 CBUS modfiy enable bit for 9 write secure cotnrol SUBIDs
  // 8:0.  9 CBUS modify enable bit for 9 READ secure control SUBIDs.
#define DMC_HEVC_EF_TRIG_CTRL                      ((0x0021  << 2) + 0xff638800)
  //bit 24:16. 9 HEVC EF trigger selection type for 9 SUBID read access.
  //bit 8:0.  9 HEVC EF trigger selection for 9 SUBID read acess.

#define DMC_HEVC_EF_PROT                           ((0x0022  << 2) + 0xff638800)
  //bit 24:16.   9 HEVC EF controlled write subID selection.
  //bit 8:0.   9 HEVC EF controlled  read subIDs selection.

#define DMC_HEVC_EF_READ                           ((0x0023  << 2) + 0xff638800)
 //bit 17:0.   DWC_HEVC_SEC_READ_CTRL value need to be changed after HEVC EF fence triggered.
#define DMC_HEVC_EF_WRITE                          ((0x0024  << 2) + 0xff638800)
 //bit 17:0.   DWC_HEVC_SEC_WRITE_CTRL value need to be changed after HEVC EF fence triggered.


//there are upto 16 read subID inside VPU and dynamic allocated 3 VPU read ports.
//there are upto 16 write subIDs insdie VPU and dynamic allocated 2 VPU write ports
//there are 3 electronic fences for VPU domain. we can allocated any of those 16 read ports as the trigger of the 3 EF.
//the 3 EF also can control any of those read ports and write ports security levels.
//the Software should make sure there's no conflit setting between these 3 EFs.
#define DMC_VPU_SEC_READ_CTRL                      ((0x0032  << 2) + 0xff638800)
//bit 31:0.  each read subID have 2 bits securty control.  one is for seucre area access. one is for unsecure aread access.

#define DMC_VPU_SEC_WRITE_CTRL                     ((0x0033  << 2) + 0xff638800)
//bit 31:0.  each write subID have 2 bits securty control.  one is for seucre area access. one is for unsecure aread access.

#define DMC_VPU_SEC_CFG                            ((0x0025  << 2) + 0xff638800)
 //31:16  enable APB bus configure VPU write SubIDs security contrl register DMC_VPU_SEC_WRITE_CTRL.
 //15:0   enable APB bus configure for VPU read SubIDs security control register. DMC_VPU_SEC_READ_CTRL

#define DMC_VPU_EF0_TRIG_CTRL                      ((0x0026  << 2) + 0xff638800)
  //31:16. VPU EF0 trigger selection read source type.
  //15:0.  VPU EF0 trigger selection read source select.
#define DMC_VPU_EF0_PROT                           ((0x0027  << 2) + 0xff638800)
  //bit 24:16.  16 VPU EF0 controlled  write subIDs selection.
  //bit 15:0.   16 VPU EF0 controlled  read subIDs selection.
#define DMC_VPU_EF0_READ                           ((0x0028  << 2) + 0xff638800)
  //EF0 controlled DMC_VPU_SEC_READ_CTRL.
#define DMC_VPU_EF0_WRITE                          ((0x0029  << 2) + 0xff638800)
  //EF0 controlled DMC_VPU_SEC_WRITE_CTRL.

#define DMC_VPU_EF1_TRIG_CTRL                      ((0x002a  << 2) + 0xff638800)
  //31:16. VPU EF1 trigger selection read source type.
  //15:0.  VPU EF1 trigger selection read source select.
#define DMC_VPU_EF1_PROT                           ((0x002b  << 2) + 0xff638800)
  //bit 24:16.  16 VPU EF1 controlled  write subIDs selection.
  //bit 15:0.   16 VPU EF1 controlled  read subIDs selection.
#define DMC_VPU_EF1_READ                           ((0x002c  << 2) + 0xff638800)
  //EF1 controlled DMC_VPU_SEC_READ_CTRL.
#define DMC_VPU_EF1_WRITE                          ((0x002d  << 2) + 0xff638800)
  //EF1 controlled DMC_VPU_SEC_WRITE_CTRL.
#define DMC_VPU_EF2_TRIG_CTRL                      ((0x002e  << 2) + 0xff638800)
  //31:16. VPU EF2 trigger selection read source type.
  //15:0.  VPU EF2 trigger selection read source select.
#define DMC_VPU_EF2_PROT                           ((0x002f  << 2) + 0xff638800)
  //bit 24:16.  16 VPU EF2 controlled  write subIDs selection.
  //bit 15:0.   16 VPU EF2 controlled  read subIDs selection.
#define DMC_VPU_EF2_READ                           ((0x0030  << 2) + 0xff638800)
  //EF2 controlled DMC_VPU_SEC_READ_CTRL.
#define DMC_VPU_EF2_WRITE                          ((0x0031  << 2) + 0xff638800)
  //EF2 controlled DMC_VPU_SEC_WRITE_CTRL.

 //GE2D is seperated port in GX.
#define DMC_GE2D_SEC_CTRL                          ((0x0034  << 2) + 0xff638800)
  //bit 31:22 NOT USED.
  //bit 21:16.  GE2D secure control after EF triggered.
  //bit 14:12   GE2D EF proection selection after EF triggered..
  //bit 11:10   GE2D Electronic fence  trigger  read source secure type selection.
  //bit 9:8   GE2D Electronic fence  trigger  read source selection.
  //bit 5:4.  GE2D write destination 2 secruity control bits.
  //bit 3:2.  GE2D read source 2 secruity control bits.
  //bit 1:0.  GE2D read source 1 secruity control bits.

#define DMC_PARSER_SEC_CTRL                        ((0x0035  << 2) + 0xff638800)
  //bit 11:8.  Pasrese write and read security contrl bits after EF triggered.
  //bit 7:6.  Parser EF trigger protection enable.
  //bit 5.    Parser EF trigger read source type.
  //bit 4     Pasrer EF trigger read source enable.
  //bit 3:2.  Parser write security control bits.
  //bit 1:0.  Parser read security control bits.
#define DMC_DEV_SEC_READ_CTRL                      ((0x0036  << 2) + 0xff638800)
  //16 device subID read access security control bits.  each subID 2 bits.
#define DMC_DEV_SEC_WRITE_CTRL                     ((0x0037  << 2) + 0xff638800)
  //16 device subID write access security control bits.  each subID 2 bits.

#define DMC_BLKMV_SEC_CTRL                         ((0x0038  << 2) + 0xff638800)
  // BLKMV ID bit 3:1 for BLKMV Threads.
  //31:16.  8 blkmv threads(6 in real blkmv RTL) write  secruity ctrl.
  //31.     1: thread 7 write enable for security range. 0 : not allowed to write to security range.
  //30.     1: thread 7 write enable for non_sec range.  0:  not allowed to write to non-sec range.
  //29.     1: thread 6 write enable for security range. 0 : not allowed to write to security range.
  //28.     1: thread 6 write enable for non_sec range.  0:  not allowed to write to non-sec range.
  // ....
  //15:0.   8 blkmv threads read security ctrl..
  //15.     1: thread 7 read enable for security range. 0 : not allowed to read from security range.
  //14.     1: thread 7 read enable for non_sec range.  0:  not allowed to read from non-sec range.
  //13.     1: thread 6 read enable for security range. 0 : not allowed to read from security range.
  //12.     1: thread 6 read enable for non_sec range.  0:  not allowed to read from non-sec range.
  //.....

#define DMC_M3_SEC_CTRL                            ((0x0039  << 2) + 0xff638800)
  // Privilege  AO_CPU ID bit 0
  //7.   M3 privilege security memory write enable.
  //6.   M3 privilege non-sec memory write enable.
  //5.   M3 normal mode security memory write enable.
  //4.   M3 normal mode  no_secl memory write enable.
  //3.   M3 privilege security memory read enable.
  //2.   M3 privilege non-sec memory read enable.
  //1.   M3 normal mode security memory read enable.
  //0.   M3 normal mode  no_secl memory read enable.

//per range per sub ID access enable.
#define DMC_SEC_RANGE0_RID_CTRL0                   ((0x0040  << 2) + 0xff638800)
   //31:29 not used.
   //28:26.  ge2d per id read enable. each bit for one ge2d ID. (actually only 2 read id for ge2d).
   //25:    M3 previlige read enable.
   //24:    M3 normal read enable.
   //23:16.  8 blkmv threads ID enable
   //15.    AXI port 6
   //14.    AXI port 5.
   //13:    HEVC LMEM ports.
   //12:5.  HEVC SUB ID. bit 5 for HEVC AMRISC IMEM.
   //4.     AXI port 3.
   //3      AXI port 2.
   //2      AXI port 1.
   //1      ARM secure access.
   //0      ARM non-secure access.
#define DMC_SEC_RANGE0_RID_CTRL1                   ((0x0041  << 2) + 0xff638800)
  // 31:16.  for 16 VPU read subids.
  // 15:0    for 16 Device subids read access.
#define DMC_SEC_RANGE0_RID_CTRL2                   ((0x0042  << 2) + 0xff638800)
  // 31:16.  for 16 HCODEC subids read access.
  // 15:0.   for 16 VDEC subids read access.

#define DMC_SEC_RANGE1_RID_CTRL0                   ((0x0043  << 2) + 0xff638800)
   //31:29 not used.
   //28:26.  ge2d per id read enable. each bit for one ge2d ID. (actually only 2 read id for ge2d).
   //25:    M3 previlige read enable.
   //24:    M3 normal read enable.
   //23:16.  8 blkmv threads ID enable
   //15.    AXI port 6
   //14.    AXI port 5.
   //13:    HEVC LMEM ports.
   //12:5.  HEVC SUB ID. bit 5 for HEVC AMRISC IMEM.
   //4.     AXI port 3.
   //3      AXI port 2.
   //2      AXI port 1.
   //1      ARM secure access.
   //0      ARM non-secure access.
#define DMC_SEC_RANGE1_RID_CTRL1                   ((0x0044  << 2) + 0xff638800)
  // 31:16.  for 16 VPU read subids.
  // 15:0    for 16 Device subids read access.
#define DMC_SEC_RANGE1_RID_CTRL2                   ((0x0045  << 2) + 0xff638800)
  // 31:16.  for 16 HCODEC subids read access.
  // 15:0.   for 16 VDEC subids read access.
#define DMC_SEC_RANGE2_RID_CTRL0                   ((0x0046  << 2) + 0xff638800)
  //same as range0 read define.
#define DMC_SEC_RANGE2_RID_CTRL1                   ((0x0047  << 2) + 0xff638800)
  //same as range0 read define.
#define DMC_SEC_RANGE2_RID_CTRL2                   ((0x0048  << 2) + 0xff638800)
  //same as range0 read define.
#define DMC_SEC_RANGE3_RID_CTRL0                   ((0x0049  << 2) + 0xff638800)
  //same as range0 read define.
#define DMC_SEC_RANGE3_RID_CTRL1                   ((0x004a  << 2) + 0xff638800)
  //same as range0 read define.
#define DMC_SEC_RANGE3_RID_CTRL2                   ((0x004b  << 2) + 0xff638800)
  //same as range0 read define.
#define DMC_SEC_RANGE4_RID_CTRL0                   ((0x004c  << 2) + 0xff638800)
  //same as range0 read define.
#define DMC_SEC_RANGE4_RID_CTRL1                   ((0x004d  << 2) + 0xff638800)
  //same as range0 read define.
#define DMC_SEC_RANGE4_RID_CTRL2                   ((0x004e  << 2) + 0xff638800)
  //same as range0 read define.
#define DMC_SEC_RANGE5_RID_CTRL0                   ((0x004f  << 2) + 0xff638800)
  //same as range0 read define.
#define DMC_SEC_RANGE5_RID_CTRL1                   ((0x0050  << 2) + 0xff638800)
  //same as range0 read define.
#define DMC_SEC_RANGE5_RID_CTRL2                   ((0x0051  << 2) + 0xff638800)
  //same as range0 read define.
#define DMC_SEC_RANGE6_RID_CTRL0                   ((0x0052  << 2) + 0xff638800)
  //same as range0 read define.
#define DMC_SEC_RANGE6_RID_CTRL1                   ((0x0053  << 2) + 0xff638800)
  //same as range0 read define.
#define DMC_SEC_RANGE6_RID_CTRL2                   ((0x0054  << 2) + 0xff638800)
  //same as range0 read define.

#define DMC_SEC_RANGE0_WID_CTRL0                   ((0x0060  << 2) + 0xff638800)
   //31:29 not used.
   //28:26.  ge2d per id write enable. each bit for one ge2d ID. (actually only 2 write id for ge2d).
   //25:    M3 previlige write enable.
   //24:    M3 normal write enable.
   //23:16.  8 blkmv thwrites ID enable
   //15.    AXI port 6
   //14.    AXI port 5.
   //13:    HEVC LMEM ports.
   //12:5.  HEVC SUB ID. bit 5 for HEVC AMRISC IMEM.
   //4.     AXI port 3.
   //3      AXI port 2.
   //2      AXI port 1.
   //1      ARM secure access.
   //0      ARM non-secure access.
#define DMC_SEC_RANGE0_WID_CTRL1                   ((0x0061  << 2) + 0xff638800)
  // 31:16.  for 16 VPU write subids.
  // 15:0    for 16 Device subids write access.
#define DMC_SEC_RANGE0_WID_CTRL2                   ((0x0062  << 2) + 0xff638800)
  // 31:16.  for 16 HCODEC subids write access.
  // 15:0.   for 16 VDEC subids write access.

#define DMC_SEC_RANGE1_WID_CTRL0                   ((0x0063  << 2) + 0xff638800)
  //same as range0 write define.
#define DMC_SEC_RANGE1_WID_CTRL1                   ((0x0064  << 2) + 0xff638800)
  //same as range0 write define.
#define DMC_SEC_RANGE1_WID_CTRL2                   ((0x0065  << 2) + 0xff638800)
  //same as range0 write define.
#define DMC_SEC_RANGE2_WID_CTRL0                   ((0x0066  << 2) + 0xff638800)
  //same as range0 write define.
#define DMC_SEC_RANGE2_WID_CTRL1                   ((0x0067  << 2) + 0xff638800)
  //same as range0 write define.
#define DMC_SEC_RANGE2_WID_CTRL2                   ((0x0068  << 2) + 0xff638800)
  //same as range0 write define.
#define DMC_SEC_RANGE3_WID_CTRL0                   ((0x0069  << 2) + 0xff638800)
  //same as range0 write define.
#define DMC_SEC_RANGE3_WID_CTRL1                   ((0x006a  << 2) + 0xff638800)
  //same as range0 write define.
#define DMC_SEC_RANGE3_WID_CTRL2                   ((0x006b  << 2) + 0xff638800)
  //same as range0 write define.
#define DMC_SEC_RANGE4_WID_CTRL0                   ((0x006c  << 2) + 0xff638800)
  //same as range0 write define.
#define DMC_SEC_RANGE4_WID_CTRL1                   ((0x006d  << 2) + 0xff638800)
  //same as range0 write define.
#define DMC_SEC_RANGE4_WID_CTRL2                   ((0x006e  << 2) + 0xff638800)
  //same as range0 write define.
#define DMC_SEC_RANGE5_WID_CTRL0                   ((0x006f  << 2) + 0xff638800)
  //same as range0 write define.
#define DMC_SEC_RANGE5_WID_CTRL1                   ((0x0070  << 2) + 0xff638800)
  //same as range0 write define.
#define DMC_SEC_RANGE5_WID_CTRL2                   ((0x0071  << 2) + 0xff638800)
  //same as range0 write define.
#define DMC_SEC_RANGE6_WID_CTRL0                   ((0x0072  << 2) + 0xff638800)
  //same as range0 write define.
#define DMC_SEC_RANGE6_WID_CTRL1                   ((0x0073  << 2) + 0xff638800)
  //same as range0 write define.
#define DMC_SEC_RANGE6_WID_CTRL2                   ((0x0074  << 2) + 0xff638800)
  //same as range0 write define.


//2 DES key one for secure region and one for non-secure region.
#define DMC_DES_KEY0_H                             ((0x0090  << 2) + 0xff638800)
#define DMC_DES_KEY0_L                             ((0x0091  << 2) + 0xff638800)
  //64bits data descrable key for security level 0 ( DES key)

#define DMC_DES_KEY1_H                             ((0x0092  << 2) + 0xff638800)
#define DMC_DES_KEY1_L                             ((0x0093  << 2) + 0xff638800)
  //64bits data descrable key for security level 1( DES key)

#define DMC_DES_PADDING                            ((0x009a  << 2) + 0xff638800)
  //32bits address padding used for DES data generation.

#define DMC_CA_REMAP_L                             ((0x009b  << 2) + 0xff638800)
#define DMC_CA_REMAP_H                             ((0x009c  << 2) + 0xff638800)
  //This is a 16x4 address remap look up table.
  //the column address bit 7:4 would be the index input and be replace with the value stored in these register.
  //{DMC_CA_REMAP_H, DMC_CA_REMAP_L}
  //bit 63:60: new address for index 15
  //bit 59:56: new address for index 14
  //bit 55:52: new address for index 13
  //bit 51:48: new address for index 12
  //bit 47:44: new address for index 11
  //bit 43:40: new address for index 10
  //bit 39:36: new address for index 9
  //bit 35:32: new address for index 8
  //bit 31:28: new address for index 7
  //bit 27:24: new address for index 6
  //bit 23:20: new address for index 5
  //bit 19:16: new address for index 4
  //bit 15:12: new address for index 3
  //bit 11:8: new address for index 2
  //bit 7:4: new address for index 1
  //bit 3:0: new address for index 0

#define DMC_DES_CTRL                               ((0x009d  << 2) + 0xff638800)
 //bit 1   DES enable.  1: DES enable. 0 : DES disable.  default is 1.
 //bit 0.  DES register mask. if write 1 only. after write 1, DES_CTRL, DES_KEY,  DES_padding, and CFG_CA_REMAP regsiter can't be write and read.


// two range protection function.
#define DMC_PROT0_RANGE                            ((0x00a0  << 2) + 0xff638800)
  //protection 0 address range. the range define is 64Kbyte boundary.  current address [31:16] >= start address && current address [31:16] <= end address.
  //bit 31:16 :   range end address.
  //bit 15:0  :   range start address
#define DMC_PROT0_CTRL                             ((0x00a1  << 2) + 0xff638800)
  //bit 19.  protection 0 for write access enable bit.
  //bit 18.  protection 0 for read access enable bit.
  //bit 17.  protection 0  write access block function. if enabled, the access wouldn't write to the DDR SDRAM.  if not enabled only generate a interrupt, but the access still wrote to DDR.
 //bit 16. not used.
 //bit 15:0  each bit to enable one of the 15 channel input for the protection function.

#define DMC_PROT1_RANGE                            ((0x00a2  << 2) + 0xff638800)
  //protection 1 address range. the range define is 64Kbyte boundary.  current address [31:16] >= start address && current address [31:16] <= end address.
  //bit 31:16 :   range end address.
  //bit 15:0  :   range start address
#define DMC_PROT1_CTRL                             ((0x00a3  << 2) + 0xff638800)
  //bit 19.  protection 1 for write access enable bit.
  //bit 18.  protection 1 for read access enable bit.
  //bit 17.  protection 1  write access block function. if enabled, the access wouldn't write to the DDR SDRAM.  if not enabled only generate a interrupt, but the access still wrote to DDR.
//two data point
#define DMC_WTCH0_D0                               ((0x00a4  << 2) + 0xff638800)
  //WTCH0 will watch upto 128bits data access.
#define DMC_WTCH0_D1                               ((0x00a5  << 2) + 0xff638800)
#define DMC_WTCH0_D2                               ((0x00a6  << 2) + 0xff638800)
#define DMC_WTCH0_D3                               ((0x00a7  << 2) + 0xff638800)
  // the watch point 0 data {d3, d2,d1,d0}
#define DMC_WTCH0_RANGE                            ((0x00a8  << 2) + 0xff638800)
  //address range. 64Kbyte boundary.
  // 31:16  start address high 16.
  // 15:0  start address high 16.
#define DMC_WTCH0_CTRL                             ((0x00a9  << 2) + 0xff638800)
  //bit 31:16.  16bits write data strb.
  //bit 15:0.   16bits input channels select.
#define DMC_WTCH0_CTRL1                            ((0x00aa  << 2) + 0xff638800)
  //bit 2. watch point 0 enable.
  //bit 1:0. watch point0 type.   2'b00 : double bytes. only watchpoint data 15:0 and data strb 1:0 is valid. 2'b01: 4 bytes.  2'b10: 8 bytes. 2'b11, all 16bytes.

#define DMC_WTCH1_D0                               ((0x00ab  << 2) + 0xff638800)
#define DMC_WTCH1_D1                               ((0x00ac  << 2) + 0xff638800)
#define DMC_WTCH1_D2                               ((0x00ad  << 2) + 0xff638800)
#define DMC_WTCH1_D3                               ((0x00ae  << 2) + 0xff638800)
  // the watch point 1 data {d3, d2,d1,d0}
#define DMC_WTCH1_RANGE                            ((0x00af  << 2) + 0xff638800)
  //address range. 64Kbyte boundary.
  // 31:16  start address high 16.
  // 15:0  start address high 16.
#define DMC_WTCH1_CTRL                             ((0x00b0  << 2) + 0xff638800)
  //bit 31:16.  16bits write data strb.
  //bit 15:0.   16bits input channels select.
#define DMC_WTCH1_CTRL1                            ((0x00b1  << 2) + 0xff638800)
  //bit 2. watch point 0 enable.
  //bit 1:0. watch point0 type.   2'b00 : double bytes. only watchpoint data 15:0 and data strb 1:0 is valid. 2'b01: 4 bytes.  2'b10: 8 bytes. 2'b11, all 16bytes.


//trap function: all the enable the port ID read access or enable PORT ID and subID read access must be in the predefine range. otherwire the read access would be blocked.
// and an error will be generated.
#define DMC_TRAP0_RANGE                            ((0x00b2  << 2) + 0xff638800)
  // address trap0 range register.
  //31:16.  trap0  end address
  //15:0    start0 address.
#define DMC_TRAP0_CTRL                             ((0x00b3  << 2) + 0xff638800)
  //bit 30 trap0 port ID 2 enable.
  //bit 29 trap0 port ID 1 enable.
  //bit 28 trap0 port ID 0 enable.
  //bit 27 trap0 port ID 2 subid enable.
  //bit 26 trap0 port ID 1 subid enable.
  //bit 25 trap0 port ID 0 subid enable.
  //bit 23:20. trap0 port ID 2  ID number.
  //bit 19:16. trap0 port ID 2  subID ID number.
  //bit 15:12. trap0 port ID 1 ID number.
  //bit 11:8.  trap0 port ID 1 subID ID number.
  //bit 7:4.   trap0 port ID 0 ID number.
  //bit 3:0.   trap0 port ID 0 subID ID number.

#define DMC_TRAP1_RANGE                            ((0x00b4  << 2) + 0xff638800)
  //address trap range register.
  //31:16.  trap end address
  //15:0    start address.
#define DMC_TRAP1_CTRL                             ((0x00b5  << 2) + 0xff638800)
  //bit 30 trap1 port ID 2 enable.
  //bit 29 trap1 port ID 1 enable.
  //bit 28 trap1 port ID 0 enable.
  //bit 27 trap1 port ID 2 subid enable.
  //bit 26 trap1 port ID 1 subid enable.
  //bit 25 trap1 port ID 0 subid enable.
  //bit 23:20. trap1 port ID 2  ID number.
  //bit 19:16. trap1 port ID 2  subID ID number.
  //bit 15:12. trap1 port ID 1 ID number.
  //bit 11:8.  trap1 port ID 1 subID ID number.
  //bit 7:4.   trap1 port ID 0 ID number.
  //bit 3:0.   trap1 port ID 0 subID ID number.


//registers to check the security protection and watch point error information.
#define DMC_SEC_STATUS                             ((0x00b6  << 2) + 0xff638800)
 //bit 31~2. not used.
 //bit 1   write security violation.
 //bit 0.  read security violation.

#define DMC_VIO_ADDR0                              ((0x00b7  << 2) + 0xff638800)
  //ddr0 write secure violation address.
#define DMC_VIO_ADDR1                              ((0x00b8  << 2) + 0xff638800)
  //22     ddr0 secure check violation.
  //21     ddr0 protection 1 vilation.
  //20     ddr0 protection 0 vilation.
  //19     ddr0 watch 1 catch
  //18.    ddr0 watch 0 catch.
  //17     ddr0 write address overflow. write out of DDR size.
  //16:14. ddr0 write violation AWPROT bits.
  //13:0   ddr0_write violation ID.
#define DMC_VIO_ADDR2                              ((0x00b9  << 2) + 0xff638800)
  //ddr1 write seure violation address
#define DMC_VIO_ADDR3                              ((0x00ba  << 2) + 0xff638800)
  //23     ddr0 write subids per range protection violation.
  //22     ddr1 write secure check violation.
  //21     ddr1 write protection 1 vilation.
  //20     ddr1 write protection 0 vilation.
  //19     ddr1 watch 1 catch
  //18.    ddr1 watch 0 catch.
  //17     ddr1 write address overflow. write out of DDR size.
  //16:14. ddr1 write violation AWPROT bits.
  //13:0   ddr1_write violation ID.

#define DMC_VIO_ADDR4                              ((0x00bb  << 2) + 0xff638800)
  //ddr0 read seure violation address
#define DMC_VIO_ADDR5                              ((0x00bc  << 2) + 0xff638800)
  //23     ddr0 read subids per range protection violation.
  //22     ddr0 read secure check violation.
  //21     ddr0 read protection 1 violation.
  //20     ddr0 read protection 0 violation.
  //19     ddr0 read trap1 violation
  //18     ddr0 read trap0 violation
  //17     ddr 0 read address overflow. write out of DDR size.
  //16:14. ddr 0 read violation ARPROT bits.
  //13:0   ddr 0 read violation ID.

#define DMC_VIO_ADDR6                              ((0x00bd  << 2) + 0xff638800)
  //ddr1 read seure violation address

#define DMC_VIO_ADDR7                              ((0x00be  << 2) + 0xff638800)
  //22     ddr1 read secure check violation.
  //21     ddr1 read protection 1 violation.
  //20     ddr1 read protection 0 violation.
  //19     ddr1 read trap1 violation
  //18     ddr1 read trap0 violation
  //17     ddr 1 read address overflow. write out of DDR size.
  //16:14. ddr 1 read violation ARPROT bits.
  //13:0   ddr 1 read violation ID.

//each row bank and rank address can be selected from any address.
#define DDR0_ADDRMAP_4                             ((0x00d4  << 2) + 0xff638800)
  //29:25 ra16 for DDR4 SDRAM
  //24:20 bg1  for DDR4 SDRAM.
  //19:15 ba2.    or bg0 for DDR4.
  //14:10 ba1.
  //9:5   ba0.
  //4:0   ra15.
#define DDR0_ADDRMAP_3                             ((0x00d3  << 2) + 0xff638800)
  //29:25 ra14.
  //24:20 ra13.
  //19:15 ra12.
  //14:10 ra11.
  //9:5   ra10.
  //4:0   ra9.
#define DDR0_ADDRMAP_2                             ((0x00d2  << 2) + 0xff638800)
  //29:25 ra8.
  //24:20 ra7.
  //19:15 ra6.
  //14:10 ra5.
  //9:5   ra4.
  //4:0   ra3.
#define DDR0_ADDRMAP_1                             ((0x00d1  << 2) + 0xff638800)
  //29:25 ra2.
  //24:20 ra1.
  //19:15 ra0.
  //14:10 ca11.
  //9:5   ca10.
  //4:0   ca9.

#define DDR0_ADDRMAP_0                             ((0x00d0  << 2) + 0xff638800)
  //29:25 ca8.
  //24:20 ca7.
  //19:15 ca6.
  //14:10 ca5.
  //9:5   ca4.
  //4:0   ca3.

#define DDR1_ADDRMAP_4                             ((0x00d9  << 2) + 0xff638800)
  //29:25 ra16 for DDR4 SDRAM
  //24:20 bg1  for DDR4 SDRAM.
  //19:15 ba2  or bg0 for DDR4 SDRAM..
  //14:10 ba1.
  //9:5   ba0.
  //4:0   ra15.
#define DDR1_ADDRMAP_3                             ((0x00d8  << 2) + 0xff638800)
  //29:25 ra14.
  //24:20 ra13.
  //19:15 ra12.
  //14:10 ra11.
  //9:5   ra10.
  //4:0   ra9.
#define DDR1_ADDRMAP_2                             ((0x00d7  << 2) + 0xff638800)
  //29:25 ra8.
  //24:20 ra7.
  //19:15 ra6.
  //14:10 ra5.
  //9:5   ra4.
  //4:0   ra3.
#define DDR1_ADDRMAP_1                             ((0x00d6  << 2) + 0xff638800)
  //29:25 ra2.
  //24:20 ra1.
  //19:15 ra0.
  //14:10 ca11.
  //9:5   ca10.
  //4:0   ca9.
#define DDR1_ADDRMAP_0                             ((0x00d5  << 2) + 0xff638800)
  //29:25 ca8.
  //24:20 ca7.
  //19:15 ca6.
  //14:10 ca5.
  //9:5   ca4.
  //4:0   ca3.
#define DMC_DDR_CTRL                               ((0x00da  << 2) + 0xff638800)
   //bit 28.   1 : cavnas use 64bytes boundary ( only support blk_mode == 2 and linear mode.  line width must be in 64bytes boundary.
              // 0 : canvas use 32bytes boundary.(support all old mode. line width must be in 32bytes boundary)
   //bit 22.   DDR4 SDRAM enable. use DDR4 protocal.
   //bit 21.   rank1 enable bit. if 1,  rank1 used the address map is as bit 5:3 defined.
   //bit 20.   BG group 1 enable for DDR4 SDRAM.
   //bit 18:   always 0.
   //bit 16.   1 only use 16bits data in a 32bits phy data interface. 0 : normal data interface.
  //bit 5:3 :  DDR rank 1 size.
     //3'b000 : DDR rank 1 is 128Mbyte.
     //3'b001 : DDR rank 1 is 256Mbyte.
     //3'b010 : DDR rank 1 is 512Mbyte.
     //3'b011 : DDR rank 1 is 1Gbyte.
     //3'b100 : DDR rank 1 is 2Gbyte.
     //3'b101 : DDR rank 1 is 4Gbyte.
     //others :  reserved.
  //bit 2:0  :  DDR rank 0 size.
     //3'b000 : DDR rank 0 is 128Mbyte.
     //3'b001 : DDR rank 0 is 256Mbyte.
     //3'b010 : DDR rank 0 is 512Mbyte.
     //3'b011 : DDR rank 0 is 1Gbyte.
     //3'b100 : DDR rank 0 is 2Gbyte.
     //3'b101 : DDR rank 0 is 4Gbyte.
     //others :  reserved.


#define DMC_TEST_STA                               ((0x00e0  << 2) + 0xff638800)
  //test start address.  for non-sha mode,  the last 5 bits would be ignored. the test address at 32bytes boundary.
  //                     for sha mode,      address must be in 64 bytes boundary. that mean the last 6 bits must be 0.

#define DMC_TEST_EDA                               ((0x00e1  << 2) + 0xff638800)
  //test end address.  for non-sha mode,  the last 5 bits would be ignored. the test address at 32bytes boundary.
  //                   for sha mode,       address must be in 64 bytes boundary. that mean the last 6bits must be 1.
#define DMC_TEST_CTRL                              ((0x00e2  << 2) + 0xff638800)
   //bit 31.  enable test.
   //bit 30.  when enable test, enable the write to DDR function.
   //bit 29.  when enable test, enable the read from DDR function.
   //bit 28.  when enable test,  enable the sha calculation function  must be same as read enable but without write function.
   //bit 27.  enabe to compare data.  when do the read enable to enable the error comparaion. suppose the read data should be same as the data in the write buffer.
   //bit 26.   reserved.
   //bit 25.  address generation type.  0: continuous increase the address in the range of test start address and test end address.
   //                                   1: test module would pick the random address from test start address  and test end address.
   //bit 24.  done type.      0 : use the DMC_TEST_NUM register as the counter of test numbers.
   //                             for write if the write command number == the DMC_TEST_NUM, the write is done.
   //                             for read if the read command number == the DMC TEST_num, the read id done. for one read command can be repeated repeat number times.
   //                         1 : finshed at end address.
   //bit 23.  wdata type.     1 : the first write is {WD3, WD2,WD1,WD0}, then the latter is the previous data plus a pattern.( { + WD7,  + WD6, + WD5, + WD4}).
   //                         0 : the WDATA is the data in write register.
   //bit 23.  reserved.
   //bit 22:20.   read repeat times.  for non-sha function, we can define multi times of the read. the test module would repeat the same adddress repeat times.
   //bit 19.     limit write.  0: no outstanding write request limitation.
   //                          1: limit the outstanding write commands to the number of bits [15:8]
   //bit 18.     limit read.   0. no outstanding read request limitation.
   //                          1. limit the read outstanding request to the number of bits[7:0].
   //bit 17:16.  sha mode for sha function enabled.  00 : not used.  01 : sha1. 2: sha2-256. 3: sha2_224. not used in GXL fixed to be  Sha 2.
   //bit 15:8.   write outstanding commands limit.
   //bit 7:0.    read  outstanding commands limit.
#define DMC_TEST_NUM                               ((0x00e3  << 2) + 0xff638800)
   // how many test command for the test if the DMC_TEST_CTRL bit 24 is 0.
#define DMC_TEST_WD0                               ((0x00e4  << 2) + 0xff638800)
   // write data 0 for write command. also for read back data comparision.
#define DMC_TEST_WD1                               ((0x00e5  << 2) + 0xff638800)
   // write data 1 for write command. also for read back data comparision.
#define DMC_TEST_WD2                               ((0x00e6  << 2) + 0xff638800)
   // write data 2 for write command. also for read back data comparision.
#define DMC_TEST_WD3                               ((0x00e7  << 2) + 0xff638800)
   // write data 3 for write command. also for read back data comparision.
#define DMC_TEST_WD4                               ((0x00e8  << 2) + 0xff638800)
   // write data 4 for write command. also for read back data comparision.
#define DMC_TEST_WD5                               ((0x00e9  << 2) + 0xff638800)
   // write data 5 for write command. also for read back data comparision.
#define DMC_TEST_WD6                               ((0x00ea  << 2) + 0xff638800)
   // write data 6 for write command. also for read back data comparision.
#define DMC_TEST_WD7                               ((0x00eb  << 2) + 0xff638800)
   // write data 7 for write command. also for read back data comparision.
#define DMC_TEST_RD0                               ((0x00ec  << 2) + 0xff638800)
   // the read back data 0.  if error happens, it would capture the first error data.
#define DMC_TEST_RD1                               ((0x00ed  << 2) + 0xff638800)
   // the read back data 1.  if error happens, it would capture the first error data.
#define DMC_TEST_RD2                               ((0x00ee  << 2) + 0xff638800)
   // the read back data 2.  if error happens, it would capture the first error data.
#define DMC_TEST_RD3                               ((0x00ef  << 2) + 0xff638800)
   // the read back data 3.  if error happens, it would capture the first error data.
#define DMC_TEST_RD4                               ((0x00f0  << 2) + 0xff638800)
   // the read back data 4.  if error happens, it would capture the first error data.
#define DMC_TEST_RD5                               ((0x00f1  << 2) + 0xff638800)
   // the read back data 5.  if error happens, it would capture the first error data.
#define DMC_TEST_RD6                               ((0x00f2  << 2) + 0xff638800)
   // the read back data 6.  if error happens, it would capture the first error data.
#define DMC_TEST_RD7                               ((0x00f3  << 2) + 0xff638800)
   // the read back data 7.  if error happens, it would capture the first error data.

#define DMC_TEST_ERR_ADDR                          ((0x00f4  << 2) + 0xff638800)
  // it capature the first error address.
#define DMC_TEST_ERR_CNT                           ((0x00f5  << 2) + 0xff638800)
  // how many data error happens in the whole test period.
#define DMC_TEST_STS                               ((0x00f6  << 2) + 0xff638800)
  //bit 31,   test done bit. write 1 to clean.
  //bit 30,   indicate address err
  //bit 29~5.  not used.
  //bit 4,    sha done.     write 1 to clean.
  //bit 3,    write done.   write 1 to clean.
  //bit 2,    read done.    write 1 to clean
  //bit 1,    write watchdog triggered.   write 1 to clean
  //bit 0,    read watchdog triggered.    write 1 to clean.
#define DMC_TEST_SHA_MSG0                          ((0x00f8  << 2) + 0xff638800)
  //the final sha message byte 3~0.
#define DMC_TEST_SHA_MSG1                          ((0x00f9  << 2) + 0xff638800)
  //the final sha message byte 7~4.
#define DMC_TEST_SHA_MSG2                          ((0x00fa  << 2) + 0xff638800)
  //the final sha message byte 11~8.
#define DMC_TEST_SHA_MSG3                          ((0x00fb  << 2) + 0xff638800)
  //the final sha message byte 15~12.
#define DMC_TEST_SHA_MSG4                          ((0x00fc  << 2) + 0xff638800)
  //the final sha message byte 19~16.
#define DMC_TEST_SHA_MSG5                          ((0x00fd  << 2) + 0xff638800)
  //the final sha message byte 23~20.
#define DMC_TEST_SHA_MSG6                          ((0x00fe  << 2) + 0xff638800)
  //the final sha message byte 27~24.
#define DMC_TEST_SHA_MSG7                          ((0x00ff  << 2) + 0xff638800)
  //the final sha message byte 31~28.

#define DMC_TEST_WRCMD_ADDR                        ((0x00dc  << 2) + 0xff638800)
  // the current write cmd address.
#define DMC_TEST_RDRSP_ADDR                        ((0x00dd  << 2) + 0xff638800)
  // the failed read response address(for error data )
#define DMC_TEST_RDCMD_ADDR                        ((0x00de  << 2) + 0xff638800)
   // the current read command address.

#define DMC_TEST_WDG                               ((0x00df  << 2) + 0xff638800)
  //31:16.  write response watch dog.
  //15:0.   read response  watch dog.


//
// Closing file:  ../mmc/dmc/rtl/dmc_sec.vh
//
//
// Reading file:  ../mmc/dmc/rtl/dmc_sticky_reg.vh
//
// -----------------------------------------------
// REG_BASE:  DMC_REG_BASE = 0xff639800
// -----------------------------------------------
#define DMC_STICKY_0                               ((0x0000  << 2) + 0xff639800)
#define DMC_STICKY_1                               ((0x0001  << 2) + 0xff639800)
#define DMC_STICKY_2                               ((0x0002  << 2) + 0xff639800)
#define DMC_STICKY_3                               ((0x0003  << 2) + 0xff639800)
#define DMC_STICKY_4                               ((0x0004  << 2) + 0xff639800)
#define DMC_STICKY_5                               ((0x0005  << 2) + 0xff639800)
#define DMC_STICKY_6                               ((0x0006  << 2) + 0xff639800)
#define DMC_STICKY_7                               ((0x0007  << 2) + 0xff639800)
#define DMC_STICKY_8                               ((0x0008  << 2) + 0xff639800)
#define DMC_STICKY_9                               ((0x0009  << 2) + 0xff639800)
#define DMC_STICKY_10                              ((0x000a  << 2) + 0xff639800)
#define DMC_STICKY_11                              ((0x000b  << 2) + 0xff639800)
#define DMC_STICKY_12                              ((0x000c  << 2) + 0xff639800)
#define DMC_STICKY_13                              ((0x000d  << 2) + 0xff639800)
#define DMC_STICKY_14                              ((0x000e  << 2) + 0xff639800)
#define DMC_STICKY_15                              ((0x000f  << 2) + 0xff639800)
#define DMC_STICKY_16                              ((0x0010  << 2) + 0xff639800)
#define DMC_STICKY_17                              ((0x0011  << 2) + 0xff639800)
#define DMC_STICKY_18                              ((0x0012  << 2) + 0xff639800)
#define DMC_STICKY_19                              ((0x0013  << 2) + 0xff639800)
#define DMC_STICKY_20                              ((0x0014  << 2) + 0xff639800)
#define DMC_STICKY_21                              ((0x0015  << 2) + 0xff639800)
#define DMC_STICKY_22                              ((0x0016  << 2) + 0xff639800)
#define DMC_STICKY_23                              ((0x0017  << 2) + 0xff639800)
#define DMC_STICKY_24                              ((0x0018  << 2) + 0xff639800)
#define DMC_STICKY_25                              ((0x0019  << 2) + 0xff639800)
#define DMC_STICKY_26                              ((0x001a  << 2) + 0xff639800)
#define DMC_STICKY_27                              ((0x001b  << 2) + 0xff639800)
#define DMC_STICKY_28                              ((0x001c  << 2) + 0xff639800)
#define DMC_STICKY_29                              ((0x001d  << 2) + 0xff639800)
#define DMC_STICKY_30                              ((0x001e  << 2) + 0xff639800)
#define DMC_STICKY_31                              ((0x001f  << 2) + 0xff639800)
#define DMC_STICKY_32                              ((0x0020  << 2) + 0xff639800)
#define DMC_STICKY_33                              ((0x0021  << 2) + 0xff639800)
#define DMC_STICKY_34                              ((0x0022  << 2) + 0xff639800)
#define DMC_STICKY_35                              ((0x0023  << 2) + 0xff639800)
#define DMC_STICKY_36                              ((0x0024  << 2) + 0xff639800)
#define DMC_STICKY_37                              ((0x0025  << 2) + 0xff639800)
#define DMC_STICKY_38                              ((0x0026  << 2) + 0xff639800)
#define DMC_STICKY_39                              ((0x0027  << 2) + 0xff639800)
#define DMC_STICKY_40                              ((0x0028  << 2) + 0xff639800)
#define DMC_STICKY_41                              ((0x0029  << 2) + 0xff639800)
#define DMC_STICKY_42                              ((0x002a  << 2) + 0xff639800)
#define DMC_STICKY_43                              ((0x002b  << 2) + 0xff639800)
#define DMC_STICKY_44                              ((0x002c  << 2) + 0xff639800)
#define DMC_STICKY_45                              ((0x002d  << 2) + 0xff639800)
#define DMC_STICKY_46                              ((0x002e  << 2) + 0xff639800)
#define DMC_STICKY_47                              ((0x002f  << 2) + 0xff639800)
#define DMC_STICKY_48                              ((0x0030  << 2) + 0xff639800)
#define DMC_STICKY_49                              ((0x0031  << 2) + 0xff639800)
#define DMC_STICKY_50                              ((0x0032  << 2) + 0xff639800)
#define DMC_STICKY_51                              ((0x0033  << 2) + 0xff639800)
#define DMC_STICKY_52                              ((0x0034  << 2) + 0xff639800)
#define DMC_STICKY_53                              ((0x0035  << 2) + 0xff639800)
#define DMC_STICKY_54                              ((0x0036  << 2) + 0xff639800)
#define DMC_STICKY_55                              ((0x0037  << 2) + 0xff639800)
#define DMC_STICKY_56                              ((0x0038  << 2) + 0xff639800)
#define DMC_STICKY_57                              ((0x0039  << 2) + 0xff639800)
#define DMC_STICKY_58                              ((0x003a  << 2) + 0xff639800)
#define DMC_STICKY_59                              ((0x003b  << 2) + 0xff639800)
#define DMC_STICKY_60                              ((0x003c  << 2) + 0xff639800)
#define DMC_STICKY_61                              ((0x003d  << 2) + 0xff639800)
#define DMC_STICKY_62                              ((0x003e  << 2) + 0xff639800)
#define DMC_STICKY_63                              ((0x003f  << 2) + 0xff639800)
//
// Closing file:  ../mmc/dmc/rtl/dmc_sticky_reg.vh
//
//
// Reading file:  ../mmc/upctl_1rank/src/dmc_upctl_define.vh
//

// -----------------------------------------------
// REG_BASE:  DMC_UPCTL_REG_BASE = 0xff639000
// -----------------------------------------------
#define DMC_UPCTL_SCFG                             ((0x0000  << 2) + 0xff639000)
   //bit 16:12.  additional delay onto the assertion of ac_pdd.
   //bit 7.      Enable assertion of ac_pdd to indicate to the PHY of an opportunty to switch to  low power state.
   //bit 0.      to enable the hardware low power interface.(not used ).

#define DMC_UPCTL_SCTL                             ((0x0001  << 2) + 0xff639000)
  //bit 2:0.  to control the UPCTL state.
     // 3'b000:   INIT.
     // 3'b001:   CFG.
     // 3'b010:   Go
     // 3'b011:   SLEEP.
     // 3'b100:   WAKEUP.

#define DMC_UPCTL_TMRD                             ((0x0006  << 2) + 0xff639000)
  //bit 2:0 tMRD. MRS command clock cycle number in DDR clock.
#define DMC_UPCTL_TRFC                             ((0x0007  << 2) + 0xff639000)
  //bit 9:0.  tRFC  in DDR clock.
#define DMC_UPCTL_TRP                              ((0x0008  << 2) + 0xff639000)
  //bit 21:16.  tRP for all bank precharge.
  //bit 5:0.    tRP for per bank precharge.
#define DMC_UPCTL_TRTW                             ((0x0009  << 2) + 0xff639000)
  //bit 3:0.  tRTW.
#define DMC_UPCTL_TCL                              ((0x000b  << 2) + 0xff639000)
  //bit 4:0 tCL.  read latency.
#define DMC_UPCTL_TCWL                             ((0x000c  << 2) + 0xff639000)
  //bit 4:0.  tCWL.  write latency.
#define DMC_UPCTL_TRAS                             ((0x000d  << 2) + 0xff639000)
  //bit 6:0.  tRAS.  Minimum Active to Precharge command time.

#define DMC_UPCTL_TRC                              ((0x000e  << 2) + 0xff639000)
  //bit 6:0.  tRC.  active to active/Auto refresh command time  must = tRAS + tRP.

#define DMC_UPCTL_TRCD                             ((0x000f  << 2) + 0xff639000)
  //bit 6:0.  tRCD  active to read/write command time.

#define DMC_UPCTL_TRRD                             ((0x0010  << 2) + 0xff639000)
  //bit 19:16. tRRD_l.   tRRD between same bank group for DDR4.
  //bit 3:0.   tRRD_s.   tRRD between different bank group for DDR4. tRRD for other DDR type. Active bank to Active bank command time.

#define DMC_UPCTL_TFAW                             ((0x0011  << 2) + 0xff639000)
  //bit 7:0.  tFAW.    Four Bank Activate window.

#define DMC_UPCTL_TRTP                             ((0x0012  << 2) + 0xff639000)
  //bit 3:0.  tRTP.   read command to precharge command time.

#define DMC_UPCTL_TWR                              ((0x0013  << 2) + 0xff639000)
  //bit 4:0.  tWR.    write recovery time.

#define DMC_UPCTL_TWTR                             ((0x0014  << 2) + 0xff639000)
  //bit 3:0.  tWTR.  write command to precharge command time.

#define DMC_UPCTL_TEXSR                            ((0x0015  << 2) + 0xff639000)
  //bit 9:0.  tEXSR.  Exit selfrefresh to first valid command delay.

#define DMC_UPCTL_TXP                              ((0x0016  << 2) + 0xff639000)
  //bit 3:0. tXP.   Exit power down to first valid command delay.

#define DMC_UPCTL_TXPDLL                           ((0x0017  << 2) + 0xff639000)
  //bit 5:0. tXPDLL.  exit precharge power down to read or write command.

#define DMC_UPCTL_TZQCS                            ((0x0018  << 2) + 0xff639000)
 //bit 6:0. tZQCS.  short ZQ CAL command  time
#define DMC_UPCTL_TZQCSI                           ((0x0019  << 2) + 0xff639000)
  //bit 31:0. tZQinit.  the first time DDR3 long ZQ CAL command time.
#define DMC_UPCTL_TCKSRE                           ((0x001a  << 2) + 0xff639000)
  //bit 4:0.  tEXSR.   valid clock requirement after self refresh enter.

#define DMC_UPCTL_TCKSRX                           ((0x001b  << 2) + 0xff639000)
  //bit 4:0.  tCKSRX.  valid clock requirement before self refresh exit.

#define DMC_UPCTL_TCKE                             ((0x001c  << 2) + 0xff639000)
  //bit 2:0.  tCKE    CKE singal minmum low/high width.

#define DMC_UPCTL_TMOD                             ((0x001d  << 2) + 0xff639000)
  //bit 4:0  tMODE.     LOAD MODE command(MRS command) to non-LOAD MODE( not MRS command) cycle time

#define DMC_UPCTL_TDQS                             ((0x001e  << 2) + 0xff639000)
  //bit 3:0  tDQS.   Additional data turnaround time for access different ranks.

#define DMC_UPCTL_TRSTL                            ((0x001f  << 2) + 0xff639000)
  //bit 6:0. tRSTL.  memory reset low time.

#define DMC_UPCTL_TZQCL                            ((0x0020  << 2) + 0xff639000)
  //bit 9:0. LPDDR3/LPDDR2 ZQ CAL (long) period

#define DMC_UPCTL_TMRR                             ((0x0021  << 2) + 0xff639000)
  //tMRR.  not support for new PCTL.

#define DMC_UPCTL_TCKESR                           ((0x0022  << 2) + 0xff639000)
  //bit 3:0.  minmum Self refresh entry to self refresh exit timing.

#define DMC_UPCTL_TREFI                            ((0x0024  << 2) + 0xff639000)
  //how many number of REFRESH command for one TREFI period.

#define DMC_UPCTL_TDPD                             ((0x0025  << 2) + 0xff639000)
  //bit 9:0.  Minimum Deep power time for LPDDR2/LPDDR3.  unit is us.

#define DMC_UPCTL_DFITCTRLDELAY                    ((0x0026  << 2) + 0xff639000)
  //bit 3:0.  tctrl_delay for PHY.

#define DMC_UPCTL_DFIODTCFG                        ((0x0027  << 2) + 0xff639000)
  //bit 12.  rank1 ODT default. default vulue for ODT[1] pins if theres no read/write activity.
  //bit 11.  rank1 ODT write sel.  enable ODT[1] if there's write occur in rank1.
  //bit 10.  rank1 ODT write nsel. enable ODT[1] if theres's write occur in rank0.
  //bit 9.   rank1 odt read sel.   enable ODT[1] if there's read occur in rank1.
  //bit 8.   rank1 odt read nsel.  enable ODT[1] if there's read occure in rank0.
  //bit 4.   rank0 ODT default.    default vulue for ODT[0] pins if theres no read/write activity.
  //bit 3.   rank0 ODT write sel.  enable ODT[0] if there's write occur in rank0.
  //bit 2.   rank0 ODT write nsel. enable ODT[0] if theres's write occur in rank1.
  //bit 1.   rank0 odt read sel.   enable ODT[0] if there's read occur in rank0.
  //bit 0.   rank0 odt read nsel.  enable ODT[0] if there's read occure in rank1.
#define DMC_UPCTL_DFIODTCFG1                       ((0x0028  << 2) + 0xff639000)
  //bit 27:24  ODT length for BL8 read transfer.
  //bit 19:16. ODT length for BL8 write transfer.
  //bit 12:8.  ODT latency for reads.  suppose to be 0.
  //bit 4:0.   ODT latency for writes.  suppose to be 0.

#define DMC_UPCTL_DFITPHYWRDATA                    ((0x002a  << 2) + 0xff639000)
  //bit 4:0.  tphy_wrdata for DFI interface PHY.
#define DMC_UPCTL_DFITPHYWRLAT                     ((0x002b  << 2) + 0xff639000)
  //bit 4:0.  tphy_wrlat.
#define DMC_UPCTL_DFITRDDATAEN                     ((0x002c  << 2) + 0xff639000)
  //bit 5:0.  tphy_rddataen
#define DMC_UPCTL_DFITPHYRDLAT                     ((0x002d  << 2) + 0xff639000)
  //bit 5:0  tphy_rdlat
#define DMC_UPCTL_DFITPHYUPDTYPE0                  ((0x002e  << 2) + 0xff639000)
  //bit 13:0.   maximum number of DFI clock cycles that the dfi_phyupd_req signal may remain asserted after the assertion of the dfi_phyupd_ack signals for dfi_phyupd_type = 0x0.
#define DMC_UPCTL_DFITPHYUPDTYPE1                  ((0x002f  << 2) + 0xff639000)
  //bit 13:0.   maximum number of DFI clock cycles that the dfi_phyupd_req signal may remain asserted after the assertion of the dfi_phyupd_ack signals for dfi_phyupd_type = 0x1.
#define DMC_UPCTL_DFITPHYUPDTYPE2                  ((0x0030  << 2) + 0xff639000)
  //bit 13:0.   maximum number of DFI clock cycles that the dfi_phyupd_req signal may remain asserted after the assertion of the dfi_phyupd_ack signals for dfi_phyupd_type = 0x2.
#define DMC_UPCTL_DFITPHYUPDTYPE3                  ((0x0031  << 2) + 0xff639000)
  //bit 13:0.   maximum number of DFI clock cycles that the dfi_phyupd_req signal may remain asserted after the assertion of the dfi_phyupd_ack signals for dfi_phyupd_type = 0x3.
#define DMC_UPCTL_DFITCTRLUPDMIN                   ((0x0032  << 2) + 0xff639000)
  //bit 15:0 specifies the minimum number of DFI clock cycles that the dfi_ctrlupd_req signal must be asserted.

#define DMC_UPCTL_DFITCTRLUPDMAX                   ((0x0033  << 2) + 0xff639000)
  //bit 15:0 specifies the maximum number of DFI clock cycles that the dfi_ctrlupd_req signal can asserted.

#define DMC_UPCTL_DFITCTRLUPDDLY                   ((0x0034  << 2) + 0xff639000)
  //bit 3:0.  Delay in DFI clock cycles between time a UPCTL-initiated update could be started and time upctl-initated update actually starts.

#define DMC_UPCTL_DFIUPDCFG                        ((0x0035  << 2) + 0xff639000)
  //bit 2. enable the generation of uPCTL-initiated updates during Wakeup(from low_power to Access state).
  //bit 1. dfi_phyupd_en.  enables the support for acknowledging PHY-initiated updates.
  //bit 0. dfi_ctlupd_en.  enable the generation of uPCTL-initiated updates.

#define DMC_UPCTL_DFITREFMSKI                      ((0x0036  << 2) + 0xff639000)
  //12:0.  time period of the masked refresh interval.

#define DMC_UPCTL_DFITCTRLUPDI                     ((0x0037  << 2) + 0xff639000)
 //31:0. DFI upctl-iitiated updates interval, measured in terms of Refresh interval units.

#define DMC_UPCTL_DFITRCFG0                        ((0x0038  << 2) + 0xff639000)
 //bit 19:16 dfi_rdlvl_rank_sel  Determines the value to drive on the output singal dfi_wrlvl_cs_n.
 //bit 12:4  dfi_rdlvl_edge      Determines the value to drive on the output signal dfi_rdlvl_edge.
 //bit 3:0.  dfi_rdlvl_rank_sel  Determines the value to drive on the output signal dfi_rdlvl_cs_n.

#define DMC_UPCTL_DFITRWRLVLEN                     ((0x0039  << 2) + 0xff639000)
  //bit 8:0.  dfi_wrlvl_en.  Determines the value to drive on the output signal dfi_wrlvl_en.

#define DMC_UPCTL_DFITRRDLVLEN                     ((0x003a  << 2) + 0xff639000)
  //bit 8:0. dfi_rdlvl_en.  Determines the value to drive on the output signal dfi_rdlvl_en.

#define DMC_UPCTL_DFITRRDLVLGATEEN                 ((0x003b  << 2) + 0xff639000)
  //bit 8:0. dfi_rdlvl_gate_en  . Determines the value to drive on the output signal dfi_rdlvl_gate_en.

#define DMC_UPCTL_DFISTCFG0                        ((0x003c  << 2) + 0xff639000)
  //bit 2 enables the driving of the dfi_data_byte_disable signal.
  //bit 1 enables the driving of the dfi_freq_ratio signals.
  //bit 0 dfi_init_start  set the value of the dfi_init_start signal.

#define DMC_UPCTL_DFISTCFG1                        ((0x003d  << 2) + 0xff639000)
  //bit 1 . enables support of the dfi_dram-clk_disable signal with Deep Power down for LPDDR2.
  //bit 0.  enables support of the dfi_dram_clk_disable with self refresh.

#define DMC_UPCTL_DFITDRAMCLKEN                    ((0x003e  << 2) + 0xff639000)
  //bit 3:0.  t_dram_clk_enable.  number of DFI clock cycles from the de-assertion of the dfi_dram_clk_disable signal on the DFI until the first valid rising edge of the clock to the dram memory device.
#define DMC_UPCTL_DFITDRAMCLKDIS                   ((0x003f  << 2) + 0xff639000)
  //bit 3:0. t_dram_clk_disable. number of DFI clock cycles from the assertionof the dfi_dram_clk_disable signal on the DFI until the clock to the DRAM memory device, maintains a low vale.

#define DMC_UPCTL_DFILPCFG0                        ((0x0040  << 2) + 0xff639000)
  //bit 31:28. dfi_lp_wakeup_dpd.  value to drive on dfi_lp_wakeup signal when Deep power down mode is entered.
         //4'b0000 -16 cycels.
         //4'b0001 -32 cycels.
         //4'b0010 -64 cycels.
         //4'b0011 -128 cycels.
         //4'b0100 -256 cycels.
         //4'b0101 -512 cycels.
         //4'b0110 -1024 cycels.
         //4'b0111 -2048 cycels.
  //bit 24. dfi_lp_en_dpd.  Enables DFI low power interface handshading during Deep power down mode.
  //bit 19:16.  setting for tlp_resp time.
  //bit 15:12. dfi_lp_wakeup_dr.  value to drive on dfi_lp_wakeup signals when self refresh mode is entered.
  //bit 8.     dfi_lp_en_sr.  enables DFI low power interface handshading during self refresh.
  //bit 7:4.   dfi_lp_wakeup_pd value to drive on dfi_lp_wakeup signal when Power Down mode is entered.
  //bit 0.     dfi_lp_en_pd.  enable DFI low power interface handshading during power down entry/exit.
#define DMC_UPCTL_MCFG                             ((0x0041  << 2) + 0xff639000)
  //bit 31:24.  clock stop idle period in n_clk cycles. for LPDDR2 and LPDDR3 . 0 to disalbe.
  //bit 21:20.   LPDDR2/LPDDR3 burst lenght.  must ot be 2'b10. only support BL8.
  //bit 17.  PD_exit mode.  0 slow exit.  1: fast exit.
  //bit 16.  pd_type.   0 precharge power down. 1 active power down.
  //bit 15:8.  pd_idle.  power down idle perild in n_clk cycles. memory puts to power down mode if the PCTL is ile for pd_idle n_clk cycles.
  //bit 7.  always 0.
  //bit 6:4.  DDR type.
      //3'b000:  DDR3 mode.
      //3'b001:  DDR4 mode.
      //3'b010:  LPDDR3 mode.
      //3'b011:  LPDDR2 mode.
  //bit 3.   2T mode. for DDR3 and DDR4 we can sett to 1T or 2T.  for LPDDR3, we must set it to 2T for DMC generating command..
  //bit 2  always 0.
  //bit 0. burst length. always 1 for burst 8.  (GXL only suport burst 8.)

#define DMC_UPCTL_MCFG1                            ((0x0042  << 2) + 0xff639000)
  //bit 0.  disable DMC traffic to PCTL and DFI interface.

#define DMC_UPCTL_PPCFG                            ((0x0043  << 2) + 0xff639000)
  //bit 0. ppmem enablel.  0 : ddr sdram is 32 data bits mode.  1: ddr sdram is 16 data bits mode.

#define DMC_UPCTL_ZQCFG                            ((0x0044  << 2) + 0xff639000)
  //bit 31:24. zqcl_op.   for LPDDR2/LPDDR3 mode. value to drive on memory address bit [19:12] for an automatic hardware generated ZQCL commands.
  //bit 23:16. zqcl_ma.   for LPDDR2/LPDDR3 mode. value to drive on memory address bits [[11:4] for an automatic hardware generated ZQCL command.
  //bit 15:8.  zqcs_op.   for LPDDr2/LPDDR3 mode. value to drive on memory address bit [19:12] for automatic hardware generated ZQCS command.
  //bit 7:0.   zqcs_ma.   for LPDDR2/LPDDR3 mode. value to drive on memory address bits [[11:4] for an automatic hardware generated ZQCS command.

#define DMC_UPCTL_DFISTSTAT0                       ((0x0046  << 2) + 0xff639000)
  //bit 24:16.  DFI data byte disable. reports the value of the output signal dfi_data_byte_disable.
  //bit 5:4.    report the value of the output signal of dfi_freq_ratio.
  //bit 1.     dfi_init_start.  reports the value of the value of the dfi_init_start output.
  //bit 0.     dfi_init_complete. init finish.

#define DMC_UPCTL_STAT                             ((0x0048  << 2) + 0xff639000)
  //bit 31:15.  not used.
  //bit 14.  dmc to pctl inteface is idle.  1 = idle. 0: not idle.
  //bit 13.  pctl dpu is idle. 1 : idle. 0 : not idle.
  //bit 12.   pctl dcu is idle. 1 : idle. 0 : not idle.
  //bit 11:9  not used.
  //bit 8.   auto power down stats. 1 : SDRAM in power down state  0: not..
  //bit 7.
  //bit 6:4.  Lower power state trigger state.  bit 6:     software drive.
  //                                        bit 5:    hardware driven due to hardware low power interface.
                                          //bit 4:    hardware driven due to auto self refresh(MCFG1.sr_idle >> 0).
  //bit 2:0.  current operation state of uPCTL.
     //3'b000 = init_mem.
     //3'b001 = config.
     //3'b010 = config_req.
     //3'b011 = access.
     //3'b100 = access_req.
     //3'b101 = Low_power.
     //3'b110 = low_power _entry_req.
     //3'b111 = low power exit _req.

#define DMC_UPCTL_TAL                              ((0x0050  << 2) + 0xff639000)
   //need to be deleted.

#define DMC_UPCTL_ODTRANK_MAP                      ((0x0051  << 2) + 0xff639000)
   // need to be deleted.

#define DMC_UPCTL_TCCD                             ((0x0052  << 2) + 0xff639000)
   //bit 19:16:   tCCD_l.
   //bit 3:0 :    tCCD_s.


//
// Closing file:  ../mmc/upctl_1rank/src/dmc_upctl_define.vh
//
//
// Reading file:  ../mmc/ddr_ip/rtl/mmc_reg_define.vh
//

// -----------------------------------------------
// REG_BASE:  MMC_REG_BASE = 0xff637000
// -----------------------------------------------
#define AM_DDR_PLL_CNTL0                           ((0x0000  << 2) + 0xff637000)
  //bit 31 :     DDR DPLL_EN
  //bit 30 :     DDR_DPLL_RESET
  //bit 29:28 :  DDR_DPLL_CLK_EN
  //bit 27:21 :  Not used.
  //bit 20:16 :  DDR_DPLL_N
  //bit 12:4  :  DDR_DPLL_M
  //bit 3:2   :  DDR_DPLL_OD
  //bit 1:0   :  DDR_DPLL_OD1
#define AM_DDR_PLL_CNTL1                           ((0x0001  << 2) + 0xff637000)
  //bit 31:22  : Not used.
  //bit 21     : DDR_DPLL_DPFD_LMODE
  //bit 20:19  : DDR_DPLL_DCVC_IN
  //bit 18     : DDR_DPLL_DIV_MODE
  //bit 17     : DDR_DPLL_DCO_SDM_EN
  //bit 16:15  : DDR_DPLL_DCO_SDMCK_SEL
  //bit 14     : DDR_DPLL_DCO_M_EN
  //bit 13     : DDR_DPLL_DCO_BAND_OPT
  //bit 12:10  : DDR_DPLL_DATA_SEL
  //bit 9:8    : DDR_DPLL_AFC_NT
  //bit 7:6    : DDR_DPLL_AFC_HOLD_T
  //bit 5:4    : DDR_DPLL_AFC_DSEL_IN
  //bit 3      : DDR_DPLL_AFC_DSEL_BYPASS
  //bit 2      : DDR_DPLL_AFC_CLK_SEL
  //bit 1:0    : DDR_DPLL_ACQ_R_CTR
#define AM_DDR_PLL_CNTL2                           ((0x0002  << 2) + 0xff637000)
  //bit 31:28  : DDR_DPLL_FILTER_PVT2
  //bit 27:24  : DDR_DPLL_FILTER_PVT1
  //bit 23:22  : not used.
  //bit 21:11  : DDR_DPLL_FILTER_ACQ2
  //bit 10:0   : DDR_DPLL_FILTER_ACQ1
#define AM_DDR_PLL_CNTL3                           ((0x0003  << 2) + 0xff637000)
  //bit 31     : DDR_DPLL_SDMNC_EN
  //bit 30     : DDR_DPLL_SDMNC_MODE
  //bit 29     : DDR_DPLL_SDMNC_RANGE
  //bit 28:27  : not used.
  //bit 26:20  : DDR_DPLL_SDMNC_POWER
  //bit 19:17  : DDR_DPLL_SDMNC_ULMS
  //bit 16     : DDR_DPLL_LOCK_BYPASSN
  //bit 15:12  : DDR_DPLL_LM_W
  //bit 11:6   : DDR_DPLL_LM_S
  //bit 5      : DDR_DPLL_IIR_BYPASS_N
  //bit 4      : DDR_DPLL_FREQ_SHIFT_EN
  //bit 3:2    : DDR_DPLL_FREQ_SHIFT_V
  //bit 1:0    : DDR_DPLL_FREQ_SEL
#define AM_DDR_PLL_CNTL4                           ((0x0004  << 2) + 0xff637000)
  //bit 31     : DDR_DPLL_SSEN
  //bit 30:28  : DDR_DPLL_SS_AMP
  //bit 27     : DDR_DPLL_SS_CLK_SEL
  //bit 26     : not used.
  //bit 25:21  : DDR_DPLL_SS_CLK
  //bit 20     : DDR_DPLL_SSC_EN
  //bit 19:16  : DDR_DPLL_SSC_DEP_SEL
  //bit 15:14  : DDR_DPLL_SSC_MODE
  //bit 13:12  : DDR_DPLL_SSC_OFFSET
  //bit 11:10  : DDR_DPLL_SSC_STR_M
  //bit 9      : not used.
  //bit 8      : DDR_DPLL_TDC_EN
  //bit 7      : DDR_DPLL_TDC_CAL_EN
  //bit 6      : DDR_DPLL_CODE_NEW
  //bit 5:4    : DDR_DPLL_TDC_DELAY_C
  //bit 3:2    : DDR_DPLL_TDC_OFF_C
  //bit 1:0    : DDR_DPLL_VBG_CT_VC
#define AM_DDR_PLL_CNTL5                           ((0x0005  << 2) + 0xff637000)
  //bit 32:29  : DDR_DPLL_VBG_PTAT_VC
  //bit 28:27  : not used.
  //bit 26     : DDR_DPLL_PVT_FIX_EN
  //bit 25:24  : DDR_DPLL_FB_OD
  //bit 23:12  : DDR_DPLL_DIV_FRAC
  //bit 11:0   : DDR_DPLL_REVE
#define AM_DDR_PLL_STS                             ((0x0006  << 2) + 0xff637000)
  //bit 31     : DDR_PLL_LOCK
  //bit 30:19  : not used.
  //bit 18     : DDR_AFC_DONE
  //bit 17     : DDR_PLL_LOCK
  //bit 16:7   : DDR_DPLL_OUT_RSV
  //bit 6:0    : DDR_SDMNC_MONITOR

#define DDR_CLK_CNTL                               ((0x0007  << 2) + 0xff637000)
  //bit 31     ddr_pll_clk enable. enable the clock from DDR_PLL to clock generateion.
  // whenever change the DDR_PLL frequency, disable the clock, after the DDR_PLL locked, then enable it again.
  //bit 30.    ddr_pll_prod_test_en.  enable the clock to clock/32 which to clock frequency measurement and production test pin.
  //bit 29.    ddr_phy_ctl_clk enable.
  //bit 28.    clock generation logic soft reset. 0 = reset.
  //bit 27.    phy_4xclk phase inverter..
  //bit 26.    pll_freq divide/2. 1:  use pll div/2 clock as the n_clk. 0: use pll clock as n_clk.  this setting is used for the synopsys DDR PHY PLL fast lock mode.
  //bit 3. force to disable PUB PCLK.
  //bit 2. PUB auto ctrl n_clk clock gating enable. when the DFI_LP_REQ and DFI_LP_ACK detected , auto gated PUB n_clk.
  //bit 1. force to disable PUB PCLK.
  //bit 0. PUB pclk auto clock gating enable.  when the IP detected PCTL enter power down mode,  use this bit to gating pub pclk.
  //

#define DDR0_SOFT_RESET                            ((0x0008  << 2) + 0xff637000)
//bit 3. pub n_clk domain soft reset.  1 active.
//bit 2. pub p_clk domain soft reset.

#define DDR0_APD_CTRL                              ((0x0009  << 2) + 0xff637000)
//bit 23:16.   power down enter latency. when IP checked the dfi_lp_req && dfi_lp_ack,  give PCTL and pub additional latency let them settle down, then gating the clock.
//bit 14    AC ctl_clk auto clock gating enable.
//bit 13    AC ddr_clk auto clock gating enable.
//bit 12    AC rdclk auto clock gating enable.
//bit 11:8  DX ctl_clk auto clock gating enable.  1 = enable. 0 = disable.
//bit 7:4.  DX ddr_clk auto clock gating enable.  1 = enable. 0 = disable.
//bit 3:0.  DX rd_clk auto clock gating enable.   1 = enable. 0 = disable.

#define DDR0_PHY_CLK_CNTL0                         ((0x000a  << 2) + 0xff637000)
// this final pin result is 1, means enable this clock. the final pin result is 0. means disable this clock.
// if use auto, means the hardware will disable this clock if there's no traffic in DFI and PHY is in LOW power mode.
// PUB_CGCR regsiter is used to control if use this pins. so please check PUB data book for CGCR register define.
//bit 31.     not used.
//bit 30      PHY_TOP AC ctl_clk clock gating auto generate enable 1 = auto 0 : 0.
//bit 29      PHY_TOP AC ddr_clk clock gating auto generate enable 1 = auto 0 : 0.
//bit 28      PHY_TOP AC rdclk   clock gating auto generate enable 1 = auto 0 : 0.
//bit 27:24   PHY_TOP DX ctl_clk clock gating auto generate enable 1 = auto 0 : 0.
//bit 23:20.  PHY_TOP DX ddr_clk clock gating auto generate enable 1 = auto 0 : 0.
//bit 19:16.  PHY_TOP DX rd_clk  clock gating auto generate enable 1 = auto 0 : 0.
//bit 15.   not used.
//bit 14    PHY_TOP AC ctl_clk clock enable pin high 1 : pin = 1. 0 : use auto ctrol
//bit 13    PHY_TOP AC ddr_clk clock enable pin high 1 : pin = 1. 0 : use auto ctrol
//bit 12    PHY_TOP AC rdclk   clock enable pin high 1 : pin = 1. 0 : use auto ctrol
//bit 11:8  PHY_TOP DX ctl_clk clock enable pin high 1 : pin = 1. 0 : use auto ctrol
//bit 7:4.  PHY_TOP DX ddr_clk clock enable pin high 1 : pin = 1. 0 : use auto ctrol
//bit 3:0.  PHY_TOP DX rd_clk  clock enable pin high 1 : pin = 1. 0 : use auto ctrol

#define DDR0_PHY_CLK_CNTL1                         ((0x000b  << 2) + 0xff637000)
// this final pin result is 1, means enable this clock. the final pin result is 0. means disable this clock.
// if use auto, means the hardware will disable this clock if there's no traffic in DFI and PHY is in LOW power mode.
// PUB_CGCR regsiter is used to control if use this pins.
//bit 10    PUB global logic auto clock gating enable. 1 = auto. 0 : pin = 0.
//bit 9     PUB DFI auto clock gating enable.          1 = auto. 0 : pin = 0.
//bit 8     PUB SCH auto clock gating enable.          1 = auto. 0 : pin = 0.
//bit 7     PUB global logic clock gating enable.   1 = pin = 1. 0 : use auto ctrl.
//bit 6     PUB schedule clock gating enable        1 = pin = 1. 0 : use auto ctrl.
//bit 5     PUB DFI clock gating enable             1 = pin = 1. 0 : use auto ctrl.
//bit 4     PUB config logic gating clock enable.   1 = pin = 1. 0 : pin = 0.
//bit 3     PUB initialization gating clock enable. 1 = pin = 1. 0 : pin = 0.
//bit 2     PUB trainning clock gating enable.      1 = pin = 1. 0 : pin = 0.
//bit 1     PUB bist clock gating enable.           1 = pin = 1. 0 : pin = 0.
//bit 0     PUB dcu clock gating enable.            1 = pin = 1. 0 : pin = 0.

#define DDR0_FRQ_CHG                               ((0x000c  << 2) + 0xff637000)
//bit 31    enable PLL fast frequncy change.  write 1 to start. after this bit cleaned, it finished.
//bit 30.   tinit_start watch dog timeout error status.  write 1 to clean.   after dfi_init_start high, there's no dfi_init_complete response from PHY.
//bit 29.   tinit_complete watch dog timeout error status. write 1 to clean.  after dfi_init_start low. there's no dfi_init_complete response from PHY.
//bit 22:   disable PUB n_clk when hardare change AMPLL OD.   1 : disable. 0 not.
//bit 21:   disable PHY n_clk when hardare change AMPLL OD.   1 : dsiable. 0 not.
//bit 20:   disable DMC(SYSTEM) n_clk when hardare change AMPLL OD.   1 : dsiable. 0 not.
//bit 19:4.  wait cycles for the PLL stable after change PLL OD OD1 value. suppose should be several cycles.
//bit 3:2.   new value of the PLL OD pin . After FFC, this value copied to AM_DDR_PLL_CNTL0 3:2 .
//bit 1:0.   new value of the PLL OD1 pin. After FFC, this value copied to AM_DDR_PLL_CNTL0 1:0.
#define DDR0_FRQ_PTR0                              ((0x000d  << 2) + 0xff637000)
 //bit 31:16. not used.
 //bit 15:0.  tinit_start(tDFI_INIT_START) for frequency change.
#define DDR0_FRQ_PTR1                              ((0x000e  << 2) + 0xff637000)
 //bit 31:0.  tinit_complete(tDFI_INIT_COMPLETE) for frequency change.

#define DDR0_PHY_IO_CTRL0                          ((0x0010  << 2) + 0xff637000)
 //bit 31.   dj for cs_n[0] pin
 //bit 30.   et for cs_n[0] pin
 //bit 29.   oj for cs_n[0] pin
 //bit 28.   sj for cs_n[0] pin
 //bit 27.   dj for odt[1] pin
 //bit 26.   et for odt[1] pin
 //bit 25.   oj for odt[1] pin
 //bit 24.   sj for odt[1] pin
 //bit 23.   dj for odt[0] pin
 //bit 22.   et for odt[0] pin
 //bit 21.   oj for odt[0] pin
 //bit 20.   sj for odt[0] pin
 //bit 19.   dj for cke[1] pin
 //bit 18.   et for cke[1] pin
 //bit 17.   oj for cke[1] pin
 //bit 16.   sj for cke[1] pin
 //bit 15.   dj for cke[0] pin
 //bit 14.   et for cke[0] pin
 //bit 13.   oj for cke[0] pin
 //bit 12.   sj for cke[0] pin
 //bit 11.   dj for ck_n pin
 //bit 10.   et for ck_n pin
 //bit 9.    oj for ck_n pin
 //bit 8.    sj for ck_n pin
 //bit 7.    dj for ck pin
 //bit 6.    et for ck pin
 //bit 5.    oj for ck pin
 //bit 4.    sj for ck pin
 //bit 3.    dj for mem_rst_n pin
 //bit 2.    et for mem_rst_n pin
 //bit 1.    oj for mem_rst_n pin
 //bit 0.    sj for mem_rst_n pin

#define DDR0_PHY_IO_CTRL1                          ((0x0011  << 2) + 0xff637000)
 //bit 7.   dj for act_n pin
 //bit 6.   et for act_n pin
 //bit 5.   oj for act_n pin
 //bit 4.   sj for act_n pin
 //bit 4.   dj for cs_n[1] pin
 //bit 3.   et for cs_n[1] pin
 //bit 2.   oj for cs_n[1] pin
 //bit 1.   sj for cs_n[1] pin
#define DDR0_PHY_IO_CTRL2                          ((0x0012  << 2) + 0xff637000)
#define DDR0_PHY_IO_CTRL3                          ((0x0013  << 2) + 0xff637000)
#define DDR0_PHY_IO_CTRL4                          ((0x0014  << 2) + 0xff637000)
#define DDR0_PHY_IO_CTRL5                          ((0x0015  << 2) + 0xff637000)
#define DDR0_PHY_IO_CTRL6                          ((0x0016  << 2) + 0xff637000)
#define DDR0_PHY_IO_CTRL7                          ((0x0017  << 2) + 0xff637000)
#define DDR0_PHY_IO_CTRL8                          ((0x0018  << 2) + 0xff637000)
#define DDR0_PHY_IO_CTRL9                          ((0x0019  << 2) + 0xff637000)
#define DDR0_PHY_IO_ST0                            ((0x001a  << 2) + 0xff637000)
#define DDR0_PHY_IO_ST1                            ((0x001b  << 2) + 0xff637000)
#define DDR0_PHY_IO_ST2                            ((0x001c  << 2) + 0xff637000)


//
// Closing file:  ../mmc/ddr_ip/rtl/mmc_reg_define.vh
//
//
// Reading file:  ../mmc/ddr_ip/rtl/ddr_phy_pub_reg.vh
//

// -----------------------------------------------
// REG_BASE:  DDR0_PUB_REG_BASE = 0xff636000
// -----------------------------------------------


#define DDR0_PUB_RIDR                              ((0x0000  << 2) + 0xff636000)
#define DDR0_PUB_PIR                               ((0x0001  << 2) + 0xff636000)
#define DDR0_PUB_CGCR                              ((0x0002  << 2) + 0xff636000)
#define DDR0_PUB_CGCR1                             ((0x0003  << 2) + 0xff636000)
#define DDR0_PUB_PGCR0                             ((0x0004  << 2) + 0xff636000)
#define DDR0_PUB_PGCR1                             ((0x0005  << 2) + 0xff636000)
#define DDR0_PUB_PGCR2                             ((0x0006  << 2) + 0xff636000)
#define DDR0_PUB_PGCR3                             ((0x0007  << 2) + 0xff636000)
#define DDR0_PUB_PGCR4                             ((0x0008  << 2) + 0xff636000)
#define DDR0_PUB_PGCR5                             ((0x0009  << 2) + 0xff636000)
#define DDR0_PUB_PGCR6                             ((0x000a  << 2) + 0xff636000)
#define DDR0_PUB_PGCR7                             ((0x000b  << 2) + 0xff636000)
#define DDR0_PUB_PGCR8                             ((0x000c  << 2) + 0xff636000)
#define DDR0_PUB_PGSR0                             ((0x000d  << 2) + 0xff636000)
#define DDR0_PUB_PGSR1                             ((0x000e  << 2) + 0xff636000)
#define DDR0_PUB_PTR0                              ((0x0010  << 2) + 0xff636000)
#define DDR0_PUB_PTR1                              ((0x0011  << 2) + 0xff636000)
#define DDR0_PUB_PTR2                              ((0x0012  << 2) + 0xff636000)
#define DDR0_PUB_PTR3                              ((0x0013  << 2) + 0xff636000)
#define DDR0_PUB_PTR4                              ((0x0014  << 2) + 0xff636000)
#define DDR0_PUB_PTR5                              ((0x0015  << 2) + 0xff636000)
#define DDR0_PUB_PTR6                              ((0x0016  << 2) + 0xff636000)
#define DDR0_PUB_PLLCR                             ((0x0020  << 2) + 0xff636000)
#define DDR0_PUB_PLLCR0                            ((0x001a  << 2) + 0xff636000)
#define DDR0_PUB_PLLCR1                            ((0x001b  << 2) + 0xff636000)
#define DDR0_PUB_PLLCR2                            ((0x001c  << 2) + 0xff636000)
#define DDR0_PUB_PLLCR3                            ((0x001d  << 2) + 0xff636000)
#define DDR0_PUB_PLLCR4                            ((0x001e  << 2) + 0xff636000)
#define DDR0_PUB_PLLCR5                            ((0x001f  << 2) + 0xff636000)
#define DDR0_PUB_DXCCR                             ((0x0022  << 2) + 0xff636000)
#define DDR0_PUB_DSGCR                             ((0x0024  << 2) + 0xff636000)
#define DDR0_PUB_ODTCR                             ((0x0026  << 2) + 0xff636000)
#define DDR0_PUB_AACR                              ((0x0028  << 2) + 0xff636000)
#define DDR0_PUB_GPR0                              ((0x0030  << 2) + 0xff636000)
#define DDR0_PUB_GPR1                              ((0x0031  << 2) + 0xff636000)
#define DDR0_PUB_DCR                               ((0x0040  << 2) + 0xff636000)
#define DDR0_PUB_DTPR0                             ((0x0044  << 2) + 0xff636000)
#define DDR0_PUB_DTPR1                             ((0x0045  << 2) + 0xff636000)
#define DDR0_PUB_DTPR2                             ((0x0046  << 2) + 0xff636000)
#define DDR0_PUB_DTPR3                             ((0x0047  << 2) + 0xff636000)
#define DDR0_PUB_DTPR4                             ((0x0048  << 2) + 0xff636000)
#define DDR0_PUB_DTPR5                             ((0x0049  << 2) + 0xff636000)
#define DDR0_PUB_DTPR6                             ((0x004a  << 2) + 0xff636000)
#define DDR0_PUB_RDIMMGCR0                         ((0x0050  << 2) + 0xff636000)
#define DDR0_PUB_RDIMMGCR1                         ((0x0051  << 2) + 0xff636000)
#define DDR0_PUB_RDIMMGCR2                         ((0x0052  << 2) + 0xff636000)
#define DDR0_PUB_RDIMMCR0                          ((0x0054  << 2) + 0xff636000)
#define DDR0_PUB_RDIMMCR1                          ((0x0055  << 2) + 0xff636000)
#define DDR0_PUB_RDIMMCR2                          ((0x0056  << 2) + 0xff636000)
#define DDR0_PUB_RDIMMCR3                          ((0x0057  << 2) + 0xff636000)
#define DDR0_PUB_RDIMMCR4                          ((0x0058  << 2) + 0xff636000)
#define DDR0_PUB_SCHCR0                            ((0x005a  << 2) + 0xff636000)
#define DDR0_PUB_SCHCR1                            ((0x005b  << 2) + 0xff636000)
#define DDR0_PUB_MR0                               ((0x0060  << 2) + 0xff636000)
#define DDR0_PUB_MR1                               ((0x0061  << 2) + 0xff636000)
#define DDR0_PUB_MR2                               ((0x0062  << 2) + 0xff636000)
#define DDR0_PUB_MR3                               ((0x0063  << 2) + 0xff636000)
#define DDR0_PUB_MR4                               ((0x0064  << 2) + 0xff636000)
#define DDR0_PUB_MR5                               ((0x0065  << 2) + 0xff636000)
#define DDR0_PUB_MR6                               ((0x0066  << 2) + 0xff636000)
#define DDR0_PUB_MR7                               ((0x0067  << 2) + 0xff636000)
#define DDR0_PUB_MR11                              ((0x006b  << 2) + 0xff636000)
#define DDR0_PUB_DTCR0                             ((0x0080  << 2) + 0xff636000)
#define DDR0_PUB_DTCR1                             ((0x0081  << 2) + 0xff636000)
#define DDR0_PUB_DTAR0                             ((0x0082  << 2) + 0xff636000)
#define DDR0_PUB_DTAR1                             ((0x0083  << 2) + 0xff636000)
#define DDR0_PUB_DTAR2                             ((0x0084  << 2) + 0xff636000)
#define DDR0_PUB_DTDR0                             ((0x0086  << 2) + 0xff636000)
#define DDR0_PUB_DTDR1                             ((0x0087  << 2) + 0xff636000)
#define DDR0_PUB_UDDR0                             ((0x0088  << 2) + 0xff636000)
#define DDR0_PUB_UDDR1                             ((0x0089  << 2) + 0xff636000)
#define DDR0_PUB_DTEDR0                            ((0x008c  << 2) + 0xff636000)
#define DDR0_PUB_DTEDR1                            ((0x008d  << 2) + 0xff636000)
#define DDR0_PUB_DTEDR2                            ((0x008e  << 2) + 0xff636000)
#define DDR0_PUB_VTDR                              ((0x008f  << 2) + 0xff636000)
#define DDR0_PUB_CATR0                             ((0x0090  << 2) + 0xff636000)
#define DDR0_PUB_CATR1                             ((0x0091  << 2) + 0xff636000)
#define DDR0_PUB_DQSDR0                            ((0x0094  << 2) + 0xff636000)
#define DDR0_PUB_DQSDR1                            ((0x0095  << 2) + 0xff636000)
#define DDR0_PUB_DQSDR2                            ((0x0096  << 2) + 0xff636000)
#define DDR0_PUB_DCUAR                             ((0x00c0  << 2) + 0xff636000)
#define DDR0_PUB_DCUDR                             ((0x00c1  << 2) + 0xff636000)
#define DDR0_PUB_DCURR                             ((0x00c2  << 2) + 0xff636000)
#define DDR0_PUB_DCULR                             ((0x00c3  << 2) + 0xff636000)
#define DDR0_PUB_DCUGCR                            ((0x00c4  << 2) + 0xff636000)
#define DDR0_PUB_DCUTPR                            ((0x00c5  << 2) + 0xff636000)
#define DDR0_PUB_DCUSR0                            ((0x00c6  << 2) + 0xff636000)
#define DDR0_PUB_DCUSR1                            ((0x00c7  << 2) + 0xff636000)
#define DDR0_PUB_BISTRR                            ((0x0100  << 2) + 0xff636000)
#define DDR0_PUB_BISTWCR                           ((0x0101  << 2) + 0xff636000)
#define DDR0_PUB_BISTMSKR0                         ((0x0102  << 2) + 0xff636000)
#define DDR0_PUB_BISTMSKR1                         ((0x0103  << 2) + 0xff636000)
#define DDR0_PUB_BISTMSKR2                         ((0x0104  << 2) + 0xff636000)
#define DDR0_PUB_BISTLSR                           ((0x0105  << 2) + 0xff636000)
#define DDR0_PUB_BISTAR0                           ((0x0106  << 2) + 0xff636000)
#define DDR0_PUB_BISTAR1                           ((0x0107  << 2) + 0xff636000)
#define DDR0_PUB_BISTAR2                           ((0x0108  << 2) + 0xff636000)
#define DDR0_PUB_BISTAR3                           ((0x0109  << 2) + 0xff636000)
#define DDR0_PUB_BISTAR4                           ((0x010a  << 2) + 0xff636000)
#define DDR0_PUB_BISTUDPR                          ((0x010b  << 2) + 0xff636000)
#define DDR0_PUB_BISTGSR                           ((0x010c  << 2) + 0xff636000)
#define DDR0_PUB_BISTWER0                          ((0x010d  << 2) + 0xff636000)
#define DDR0_PUB_BISTWER1                          ((0x010e  << 2) + 0xff636000)
#define DDR0_PUB_BISTBER0                          ((0x010f  << 2) + 0xff636000)
#define DDR0_PUB_BISTBER1                          ((0x0110  << 2) + 0xff636000)
#define DDR0_PUB_BISTBER2                          ((0x0111  << 2) + 0xff636000)
#define DDR0_PUB_BISTBER3                          ((0x0112  << 2) + 0xff636000)
#define DDR0_PUB_BISTBER4                          ((0x0113  << 2) + 0xff636000)
#define DDR0_PUB_BISTWCSR                          ((0x0114  << 2) + 0xff636000)
#define DDR0_PUB_BISTFWR0                          ((0x0115  << 2) + 0xff636000)
#define DDR0_PUB_BISTFWR1                          ((0x0116  << 2) + 0xff636000)
#define DDR0_PUB_BISTFWR2                          ((0x0117  << 2) + 0xff636000)
#define DDR0_PUB_BISTBER5                          ((0x0118  << 2) + 0xff636000)
#define DDR0_PUB_RANKIDR                           ((0x0137  << 2) + 0xff636000)
#define DDR0_PUB_RIOCR0                            ((0x0138  << 2) + 0xff636000)
#define DDR0_PUB_RIOCR1                            ((0x0139  << 2) + 0xff636000)
#define DDR0_PUB_RIOCR2                            ((0x013a  << 2) + 0xff636000)
#define DDR0_PUB_RIOCR3                            ((0x013b  << 2) + 0xff636000)
#define DDR0_PUB_RIOCR4                            ((0x013c  << 2) + 0xff636000)
#define DDR0_PUB_RIOCR5                            ((0x013d  << 2) + 0xff636000)
#define DDR0_PUB_ACIOCR0                           ((0x0140  << 2) + 0xff636000)
#define DDR0_PUB_ACIOCR1                           ((0x0141  << 2) + 0xff636000)
#define DDR0_PUB_ACIOCR2                           ((0x0142  << 2) + 0xff636000)
#define DDR0_PUB_ACIOCR3                           ((0x0143  << 2) + 0xff636000)
#define DDR0_PUB_ACIOCR4                           ((0x0144  << 2) + 0xff636000)
#define DDR0_PUB_ACIOCR5                           ((0x0145  << 2) + 0xff636000)
#define DDR0_PUB_IOVCR0                            ((0x0148  << 2) + 0xff636000)
#define DDR0_PUB_IOVCR1                            ((0x0149  << 2) + 0xff636000)
#define DDR0_PUB_VTCR0                             ((0x014a  << 2) + 0xff636000)
#define DDR0_PUB_VTCR1                             ((0x014b  << 2) + 0xff636000)
#define DDR0_PUB_ACBDLR0                           ((0x0150  << 2) + 0xff636000)
#define DDR0_PUB_ACBDLR1                           ((0x0151  << 2) + 0xff636000)
#define DDR0_PUB_ACBDLR2                           ((0x0152  << 2) + 0xff636000)
#define DDR0_PUB_ACBDLR3                           ((0x0153  << 2) + 0xff636000)
#define DDR0_PUB_ACBDLR4                           ((0x0154  << 2) + 0xff636000)
#define DDR0_PUB_ACBDLR5                           ((0x0155  << 2) + 0xff636000)
#define DDR0_PUB_ACBDLR6                           ((0x0156  << 2) + 0xff636000)
#define DDR0_PUB_ACBDLR7                           ((0x0157  << 2) + 0xff636000)
#define DDR0_PUB_ACBDLR8                           ((0x0158  << 2) + 0xff636000)
#define DDR0_PUB_ACBDLR9                           ((0x0159  << 2) + 0xff636000)
#define DDR0_PUB_ACBDLR10                          ((0x015a  << 2) + 0xff636000)
#define DDR0_PUB_ACBDLR11                          ((0x015b  << 2) + 0xff636000)
#define DDR0_PUB_ACBDLR12                          ((0x015c  << 2) + 0xff636000)
#define DDR0_PUB_ACBDLR13                          ((0x015d  << 2) + 0xff636000)
#define DDR0_PUB_ACBDLR14                          ((0x015e  << 2) + 0xff636000)
#define DDR0_PUB_ACLCDLR                           ((0x0160  << 2) + 0xff636000)
#define DDR0_PUB_ACMDLR0                           ((0x0168  << 2) + 0xff636000)
#define DDR0_PUB_ACMDLR1                           ((0x0169  << 2) + 0xff636000)

#define DDR0_PUB_ZQCR                              ((0x01a0  << 2) + 0xff636000)
#define DDR0_PUB_ZQ0PR                             ((0x01a1  << 2) + 0xff636000)
#define DDR0_PUB_ZQ0DR                             ((0x01a2  << 2) + 0xff636000)
#define DDR0_PUB_ZQ0SR                             ((0x01a3  << 2) + 0xff636000)

#define DDR0_PUB_ZQ1PR                             ((0x01a5  << 2) + 0xff636000)
#define DDR0_PUB_ZQ1DR                             ((0x01a6  << 2) + 0xff636000)
#define DDR0_PUB_ZQ1SR                             ((0x01a7  << 2) + 0xff636000)

#define DDR0_PUB_ZQ2PR                             ((0x01a9  << 2) + 0xff636000)
#define DDR0_PUB_ZQ2DR                             ((0x01aa  << 2) + 0xff636000)
#define DDR0_PUB_ZQ2SR                             ((0x01ab  << 2) + 0xff636000)


#define DDR0_PUB_DX0GCR0                           ((0x01c0  << 2) + 0xff636000)
#define DDR0_PUB_DX0GCR1                           ((0x01c1  << 2) + 0xff636000)
#define DDR0_PUB_DX0GCR2                           ((0x01c2  << 2) + 0xff636000)
#define DDR0_PUB_DX0GCR3                           ((0x01c3  << 2) + 0xff636000)
#define DDR0_PUB_DX0GCR4                           ((0x01c4  << 2) + 0xff636000)
#define DDR0_PUB_DX0GCR5                           ((0x01c5  << 2) + 0xff636000)
#define DDR0_PUB_DX0GCR6                           ((0x01c6  << 2) + 0xff636000)
#define DDR0_PUB_DX0GCR7                           ((0x01c7  << 2) + 0xff636000)
#define DDR0_PUB_DX0GCR8                           ((0x01c8  << 2) + 0xff636000)
#define DDR0_PUB_DX0GCR9                           ((0x01c9  << 2) + 0xff636000)
#define DDR0_PUB_DX0BDLR0                          ((0x01d0  << 2) + 0xff636000)
#define DDR0_PUB_DX0BDLR1                          ((0x01d1  << 2) + 0xff636000)
#define DDR0_PUB_DX0BDLR2                          ((0x01d2  << 2) + 0xff636000)
#define DDR0_PUB_DX0BDLR3                          ((0x01d4  << 2) + 0xff636000)
#define DDR0_PUB_DX0BDLR4                          ((0x01d5  << 2) + 0xff636000)
#define DDR0_PUB_DX0BDLR5                          ((0x01d6  << 2) + 0xff636000)
#define DDR0_PUB_DX0BDLR6                          ((0x01d8  << 2) + 0xff636000)
#define DDR0_PUB_DX0LCDLR0                         ((0x01e0  << 2) + 0xff636000)
#define DDR0_PUB_DX0LCDLR1                         ((0x01e1  << 2) + 0xff636000)
#define DDR0_PUB_DX0LCDLR2                         ((0x01e2  << 2) + 0xff636000)
#define DDR0_PUB_DX0LCDLR3                         ((0x01e3  << 2) + 0xff636000)
#define DDR0_PUB_DX0LCDLR4                         ((0x01e4  << 2) + 0xff636000)
#define DDR0_PUB_DX0LCDLR5                         ((0x01e5  << 2) + 0xff636000)
#define DDR0_PUB_DX0MDLR0                          ((0x01e8  << 2) + 0xff636000)
#define DDR0_PUB_DX0MDLR1                          ((0x01e9  << 2) + 0xff636000)
#define DDR0_PUB_DX0GTR0                           ((0x01f0  << 2) + 0xff636000)
#define DDR0_PUB_DX0GTR1                           ((0x01f1  << 2) + 0xff636000)
#define DDR0_PUB_DX0GTR2                           ((0x01f2  << 2) + 0xff636000)
#define DDR0_PUB_DX0GTR3                           ((0x01f3  << 2) + 0xff636000)
#define DDR0_PUB_DX0RSR0                           ((0x01f4  << 2) + 0xff636000)
#define DDR0_PUB_DX0RSR1                           ((0x01f5  << 2) + 0xff636000)
#define DDR0_PUB_DX0RSR2                           ((0x01f6  << 2) + 0xff636000)
#define DDR0_PUB_DX0RSR3                           ((0x01f7  << 2) + 0xff636000)
#define DDR0_PUB_DX0GSR0                           ((0x01f8  << 2) + 0xff636000)
#define DDR0_PUB_DX0GSR1                           ((0x01f9  << 2) + 0xff636000)
#define DDR0_PUB_DX0GSR2                           ((0x01fa  << 2) + 0xff636000)
#define DDR0_PUB_DX0GSR3                           ((0x01fb  << 2) + 0xff636000)
#define DDR0_PUB_DX0GSR4                           ((0x01fc  << 2) + 0xff636000)
#define DDR0_PUB_DX0GSR5                           ((0x01fd  << 2) + 0xff636000)

#define DDR0_PUB_DX1GCR0                           ((0x0200  << 2) + 0xff636000)
#define DDR0_PUB_DX1GCR1                           ((0x0201  << 2) + 0xff636000)
#define DDR0_PUB_DX1GCR2                           ((0x0202  << 2) + 0xff636000)
#define DDR0_PUB_DX1GCR3                           ((0x0203  << 2) + 0xff636000)
#define DDR0_PUB_DX1GCR4                           ((0x0204  << 2) + 0xff636000)
#define DDR0_PUB_DX1GCR5                           ((0x0205  << 2) + 0xff636000)
#define DDR0_PUB_DX1GCR6                           ((0x0206  << 2) + 0xff636000)
#define DDR0_PUB_DX1GCR7                           ((0x0207  << 2) + 0xff636000)
#define DDR0_PUB_DX1GCR8                           ((0x0208  << 2) + 0xff636000)
#define DDR0_PUB_DX1GCR9                           ((0x0209  << 2) + 0xff636000)
#define DDR0_PUB_DX1BDLR0                          ((0x0210  << 2) + 0xff636000)
#define DDR0_PUB_DX1BDLR1                          ((0x0211  << 2) + 0xff636000)
#define DDR0_PUB_DX1BDLR2                          ((0x0212  << 2) + 0xff636000)
#define DDR0_PUB_DX1BDLR3                          ((0x0214  << 2) + 0xff636000)
#define DDR0_PUB_DX1BDLR4                          ((0x0215  << 2) + 0xff636000)
#define DDR0_PUB_DX1BDLR5                          ((0x0216  << 2) + 0xff636000)
#define DDR0_PUB_DX1BDLR6                          ((0x0218  << 2) + 0xff636000)
#define DDR0_PUB_DX1LCDLR0                         ((0x0220  << 2) + 0xff636000)
#define DDR0_PUB_DX1LCDLR1                         ((0x0221  << 2) + 0xff636000)
#define DDR0_PUB_DX1LCDLR2                         ((0x0222  << 2) + 0xff636000)
#define DDR0_PUB_DX1LCDLR3                         ((0x0223  << 2) + 0xff636000)
#define DDR0_PUB_DX1LCDLR4                         ((0x0224  << 2) + 0xff636000)
#define DDR0_PUB_DX1LCDLR5                         ((0x0225  << 2) + 0xff636000)
#define DDR0_PUB_DX1MDLR0                          ((0x0228  << 2) + 0xff636000)
#define DDR0_PUB_DX1MDLR1                          ((0x0229  << 2) + 0xff636000)
#define DDR0_PUB_DX1GTR0                           ((0x0230  << 2) + 0xff636000)
#define DDR0_PUB_DX1GTR1                           ((0x0231  << 2) + 0xff636000)
#define DDR0_PUB_DX1GTR2                           ((0x0232  << 2) + 0xff636000)
#define DDR0_PUB_DX1GTR3                           ((0x0233  << 2) + 0xff636000)
#define DDR0_PUB_DX1RSR0                           ((0x0234  << 2) + 0xff636000)
#define DDR0_PUB_DX1RSR1                           ((0x0235  << 2) + 0xff636000)
#define DDR0_PUB_DX1RSR2                           ((0x0236  << 2) + 0xff636000)
#define DDR0_PUB_DX1RSR3                           ((0x0237  << 2) + 0xff636000)
#define DDR0_PUB_DX1GSR0                           ((0x0238  << 2) + 0xff636000)
#define DDR0_PUB_DX1GSR1                           ((0x0239  << 2) + 0xff636000)
#define DDR0_PUB_DX1GSR2                           ((0x023a  << 2) + 0xff636000)
#define DDR0_PUB_DX1GSR3                           ((0x023b  << 2) + 0xff636000)
#define DDR0_PUB_DX1GSR4                           ((0x023c  << 2) + 0xff636000)
#define DDR0_PUB_DX1GSR5                           ((0x023d  << 2) + 0xff636000)

#define DDR0_PUB_DX2GCR0                           ((0x0240  << 2) + 0xff636000)
#define DDR0_PUB_DX2GCR1                           ((0x0241  << 2) + 0xff636000)
#define DDR0_PUB_DX2GCR2                           ((0x0242  << 2) + 0xff636000)
#define DDR0_PUB_DX2GCR3                           ((0x0243  << 2) + 0xff636000)
#define DDR0_PUB_DX2GCR4                           ((0x0244  << 2) + 0xff636000)
#define DDR0_PUB_DX2GCR5                           ((0x0245  << 2) + 0xff636000)
#define DDR0_PUB_DX2GCR6                           ((0x0246  << 2) + 0xff636000)
#define DDR0_PUB_DX2GCR7                           ((0x0247  << 2) + 0xff636000)
#define DDR0_PUB_DX2GCR8                           ((0x0248  << 2) + 0xff636000)
#define DDR0_PUB_DX2GCR9                           ((0x0249  << 2) + 0xff636000)
#define DDR0_PUB_DX2BDLR0                          ((0x0250  << 2) + 0xff636000)
#define DDR0_PUB_DX2BDLR1                          ((0x0251  << 2) + 0xff636000)
#define DDR0_PUB_DX2BDLR2                          ((0x0252  << 2) + 0xff636000)
#define DDR0_PUB_DX2BDLR3                          ((0x0254  << 2) + 0xff636000)
#define DDR0_PUB_DX2BDLR4                          ((0x0255  << 2) + 0xff636000)
#define DDR0_PUB_DX2BDLR5                          ((0x0256  << 2) + 0xff636000)
#define DDR0_PUB_DX2BDLR6                          ((0x0258  << 2) + 0xff636000)
#define DDR0_PUB_DX2LCDLR0                         ((0x0260  << 2) + 0xff636000)
#define DDR0_PUB_DX2LCDLR1                         ((0x0261  << 2) + 0xff636000)
#define DDR0_PUB_DX2LCDLR2                         ((0x0262  << 2) + 0xff636000)
#define DDR0_PUB_DX2LCDLR3                         ((0x0263  << 2) + 0xff636000)
#define DDR0_PUB_DX2LCDLR4                         ((0x0264  << 2) + 0xff636000)
#define DDR0_PUB_DX2LCDLR5                         ((0x0265  << 2) + 0xff636000)
#define DDR0_PUB_DX2MDLR0                          ((0x0268  << 2) + 0xff636000)
#define DDR0_PUB_DX2MDLR1                          ((0x0269  << 2) + 0xff636000)
#define DDR0_PUB_DX2GTR0                           ((0x0270  << 2) + 0xff636000)
#define DDR0_PUB_DX2GTR1                           ((0x0271  << 2) + 0xff636000)
#define DDR0_PUB_DX2GTR2                           ((0x0272  << 2) + 0xff636000)
#define DDR0_PUB_DX2GTR3                           ((0x0273  << 2) + 0xff636000)
#define DDR0_PUB_DX2RSR0                           ((0x0274  << 2) + 0xff636000)
#define DDR0_PUB_DX2RSR1                           ((0x0275  << 2) + 0xff636000)
#define DDR0_PUB_DX2RSR2                           ((0x0276  << 2) + 0xff636000)
#define DDR0_PUB_DX2RSR3                           ((0x0277  << 2) + 0xff636000)
#define DDR0_PUB_DX2GSR0                           ((0x0278  << 2) + 0xff636000)
#define DDR0_PUB_DX2GSR1                           ((0x0279  << 2) + 0xff636000)
#define DDR0_PUB_DX2GSR2                           ((0x027a  << 2) + 0xff636000)
#define DDR0_PUB_DX2GSR3                           ((0x027b  << 2) + 0xff636000)
#define DDR0_PUB_DX2GSR4                           ((0x027c  << 2) + 0xff636000)
#define DDR0_PUB_DX2GSR5                           ((0x027d  << 2) + 0xff636000)


#define DDR0_PUB_DX3GCR0                           ((0x0280  << 2) + 0xff636000)
#define DDR0_PUB_DX3GCR1                           ((0x0281  << 2) + 0xff636000)
#define DDR0_PUB_DX3GCR2                           ((0x0282  << 2) + 0xff636000)
#define DDR0_PUB_DX3GCR3                           ((0x0283  << 2) + 0xff636000)
#define DDR0_PUB_DX3GCR4                           ((0x0284  << 2) + 0xff636000)
#define DDR0_PUB_DX3GCR5                           ((0x0285  << 2) + 0xff636000)
#define DDR0_PUB_DX3GCR6                           ((0x0286  << 2) + 0xff636000)
#define DDR0_PUB_DX3GCR7                           ((0x0287  << 2) + 0xff636000)
#define DDR0_PUB_DX3GCR8                           ((0x0288  << 2) + 0xff636000)
#define DDR0_PUB_DX3GCR9                           ((0x0289  << 2) + 0xff636000)
#define DDR0_PUB_DX3BDLR0                          ((0x0290  << 2) + 0xff636000)
#define DDR0_PUB_DX3BDLR1                          ((0x0291  << 2) + 0xff636000)
#define DDR0_PUB_DX3BDLR2                          ((0x0292  << 2) + 0xff636000)
#define DDR0_PUB_DX3BDLR3                          ((0x0294  << 2) + 0xff636000)
#define DDR0_PUB_DX3BDLR4                          ((0x0295  << 2) + 0xff636000)
#define DDR0_PUB_DX3BDLR5                          ((0x0296  << 2) + 0xff636000)
#define DDR0_PUB_DX3BDLR6                          ((0x0298  << 2) + 0xff636000)
#define DDR0_PUB_DX3LCDLR0                         ((0x02a0  << 2) + 0xff636000)
#define DDR0_PUB_DX3LCDLR1                         ((0x02a1  << 2) + 0xff636000)
#define DDR0_PUB_DX3LCDLR2                         ((0x02a2  << 2) + 0xff636000)
#define DDR0_PUB_DX3LCDLR3                         ((0x02a3  << 2) + 0xff636000)
#define DDR0_PUB_DX3LCDLR4                         ((0x02a4  << 2) + 0xff636000)
#define DDR0_PUB_DX3LCDLR5                         ((0x02a5  << 2) + 0xff636000)
#define DDR0_PUB_DX3MDLR0                          ((0x02a8  << 2) + 0xff636000)
#define DDR0_PUB_DX3MDLR1                          ((0x02a9  << 2) + 0xff636000)
#define DDR0_PUB_DX3GTR0                           ((0x02b0  << 2) + 0xff636000)
#define DDR0_PUB_DX3GTR1                           ((0x02b1  << 2) + 0xff636000)
#define DDR0_PUB_DX3GTR2                           ((0x02b2  << 2) + 0xff636000)
#define DDR0_PUB_DX3GTR3                           ((0x02b3  << 2) + 0xff636000)
#define DDR0_PUB_DX3RSR0                           ((0x02b4  << 2) + 0xff636000)
#define DDR0_PUB_DX3RSR1                           ((0x02b5  << 2) + 0xff636000)
#define DDR0_PUB_DX3RSR2                           ((0x02b6  << 2) + 0xff636000)
#define DDR0_PUB_DX3RSR3                           ((0x02b7  << 2) + 0xff636000)
#define DDR0_PUB_DX3GSR0                           ((0x02b8  << 2) + 0xff636000)
#define DDR0_PUB_DX3GSR1                           ((0x02b9  << 2) + 0xff636000)
#define DDR0_PUB_DX3GSR2                           ((0x02ba  << 2) + 0xff636000)
#define DDR0_PUB_DX3GSR3                           ((0x02bb  << 2) + 0xff636000)
#define DDR0_PUB_DX3GSR4                           ((0x02bc  << 2) + 0xff636000)
#define DDR0_PUB_DX3GSR5                           ((0x02bd  << 2) + 0xff636000)


//
// Closing file:  ../mmc/ddr_ip/rtl/ddr_phy_pub_reg.vh
//
//
// Closing file:  ./mmc_reg.vh
//

#endif // MMC_REG_DEFINE