| /* | |
| * arch/arm/include/asm/arch-gxtvbb/i2c.h | |
| * | |
| * Copyright (C) 2015 Amlogic, Inc. All rights reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| * more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along | |
| * with this program; if not, write to the Free Software Foundation, Inc., | |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. | |
| */ | |
| #ifndef __AML_MACH_I2C__ | |
| #define __AML_MACH_I2C__ | |
| #include <asm/io.h> | |
| /** | |
| * struct i2c_msg - an I2C transaction segment beginning with START | |
| * @addr: Slave address, either seven or ten bits. When this is a ten | |
| * bit address, I2C_M_TEN must be set in @flags and the adapter | |
| * must support I2C_FUNC_10BIT_ADDR. | |
| * @flags: I2C_M_RD is handled by all adapters. No other flags may be | |
| * provided unless the adapter exported the relevant I2C_FUNC_* | |
| * flags through i2c_check_functionality(). | |
| * @len: Number of data bytes in @buf being read from or written to the | |
| * I2C slave address. For read transactions where I2C_M_RECV_LEN | |
| * is set, the caller guarantees that this buffer can hold up to | |
| * 32 bytes in addition to the initial length byte sent by the | |
| * slave (plus, if used, the SMBus PEC); and this value will be | |
| * incremented by the number of block data bytes received. | |
| * @buf: The buffer into which data is read, or from which it's written. | |
| * | |
| * An i2c_msg is the low level representation of one segment of an I2C | |
| * transaction. It is visible to drivers in the @i2c_transfer() procedure, | |
| * to userspace from i2c-dev, and to I2C adapter drivers through the | |
| * @i2c_adapter.@master_xfer() method. | |
| * | |
| * Except when I2C "protocol mangling" is used, all I2C adapters implement | |
| * the standard rules for I2C transactions. Each transaction begins with a | |
| * START. That is followed by the slave address, and a bit encoding read | |
| * versus write. Then follow all the data bytes, possibly including a byte | |
| * with SMBus PEC. The transfer terminates with a NAK, or when all those | |
| * bytes have been transferred and ACKed. If this is the last message in a | |
| * group, it is followed by a STOP. Otherwise it is followed by the next | |
| * @i2c_msg transaction segment, beginning with a (repeated) START. | |
| * | |
| * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then | |
| * passing certain @flags may have changed those standard protocol behaviors. | |
| * Those flags are only for use with broken/nonconforming slaves, and with | |
| * adapters which are known to support the specific mangling options they | |
| * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR). | |
| */ | |
| struct i2c_msg { | |
| __u16 addr; /* slave address */ | |
| __u16 flags; | |
| #define I2C_M_TEN 0x0010 /* this is a ten bit chip address */ | |
| #define I2C_M_RD 0x0001 /* read data, from slave to master */ | |
| #define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_PROTOCOL_MANGLING */ | |
| #define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */ | |
| #define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */ | |
| #define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */ | |
| #define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */ | |
| __u16 len; /* msg length */ | |
| __u8 *buf; /* pointer to msg data */ | |
| }; | |
| #define I2C_M_0_CONTROL_REG 0x2140 | |
| /*#define I2C_M_0_SLAVE_ADDR 0x2141 | |
| #define I2C_M_0_TOKEN_LIST0 0x2142 | |
| #define I2C_M_0_TOKEN_LIST1 0x2143 | |
| #define I2C_M_0_WDATA_REG0 0x2144 | |
| #define I2C_M_0_WDATA_REG1 0x2145 | |
| #define I2C_M_0_RDATA_REG0 0x2146 | |
| #define I2C_M_0_RDATA_REG1 0x2147 | |
| */ | |
| #define I2C_S_CONTROL_REG 0x2150 | |
| #define I2C_M_1_CONTROL_REG 0x21f0 | |
| #define I2C_M_2_CONTROL_REG 0x21f8 | |
| #define I2C_M_3_CONTROL_REG 0x2348 | |
| #define MESON_I2C_MASTER_AO_START (0xc8100500) | |
| #define MESON_I2C_MASTER_AO_END (0xc810051c+5) | |
| #define MESON_I2C_MASTER_A_START CBUS_REG_ADDR(I2C_M_0_CONTROL_REG) | |
| #define MESON_I2C_MASTER_A_END (CBUS_REG_ADDR(I2C_M_0_RDATA_REG1+1)-1) | |
| #define MESON_I2C_MASTER_B_START CBUS_REG_ADDR(I2C_M_1_CONTROL_REG) | |
| #define MESON_I2C_MASTER_B_END (CBUS_REG_ADDR(I2C_M_1_RDATA_REG1+1)-1) | |
| #define MESON_I2C_MASTER_C_START CBUS_REG_ADDR(I2C_M_2_CONTROL_REG) | |
| #define MESON_I2C_MASTER_C_END (CBUS_REG_ADDR(I2C_M_2_RDATA_REG1+1)-1) | |
| #define MESON_I2C_MASTER_D_START CBUS_REG_ADDR(I2C_M_3_CONTROL_REG) | |
| #define MESON_I2C_MASTER_D_END (CBUS_REG_ADDR(I2C_M_3_RDATA_REG1+1)-1) | |
| #define MESON_I2C_SLAVE_START CBUS_REG_ADDR(I2C_S_CONTROL_REG) | |
| #define MESON_I2C_SLAVE_END (CBUS_REG_ADDR(I2C_S_CNTL1_REG+1)-1) | |
| #define AML_I2C_MASTER_AO 0 | |
| #define AML_I2C_MASTER_A 1 | |
| #define AML_I2C_MASTER_B 2 | |
| #define AML_I2C_MASTER_C 3 | |
| #define AML_I2C_MASTER_D 4 | |
| #define AML_I2C_SLAVE_ADDR 0x6c | |
| /*M1 i2c pinmux | |
| * I/O I2C_MASTER_A I2C_MASTER_B I2C_SLAVE | |
| * GPIO_JTAG_TMS SCK_A REG1[12] SCK_A REG1[13] | |
| * GPIO_JTAG_TDI SDA_A REG1[12] SDA_A REG1[13] | |
| * GPIO_JTAG_TCK SCK_B REG1[16] SCK_A REG1[17] | |
| * GPIO_JTAG_TDO SDA_B REG1[20] SDA_A REG1[21] | |
| * GPIOB_0 SCK_B REG2[5] SCK_A REG2[6] | |
| * GPIOB_1 SDA_B REG2[2] SDA_A REG2[3] | |
| * GPIOB_2 SCK_A REGS[13] SCK_A REG2[14] | |
| * GPIOB_3 SDA_A REG2[9] SDA_A REG2[10] | |
| * GPIOC_13 SCK_B REG3[28] SCK_A REG3[29] | |
| * GPIOC_14 SDA_B REG3[25] SDA_A REG3[26] | |
| * GPIOC_21 SCK_A REG7[9] SCK_A REG7[10] | |
| * GPIOC_22 SDA_A REG7[6] SDA_A REG7[7] | |
| * GPIOE_16 SCK_B REG5[27] SCK_A REG5[28] | |
| * GPIOE_17 SDA_B REG5[25] SDA_A REG5[26] | |
| */ | |
| /*i2c master a*/ | |
| #define MESON_I2C_MASTER_A_GPIOZ_17_REG (PERIPHS_PIN_MUX_9) | |
| #define MESON_I2C_MASTER_A_GPIOZ_17_BIT (1<<7) | |
| #define MESON_I2C_MASTER_A_GPIOZ_18_REG (PERIPHS_PIN_MUX_9) | |
| #define MESON_I2C_MASTER_A_GPIOZ_18_BIT (1<<8) | |
| #define MESON_I2C_MASTER_A_GPIOW_0_REG (PERIPHS_PIN_MUX_5) | |
| #define MESON_I2C_MASTER_A_GPIOW_0_BIT (1<<22) | |
| #define MESON_I2C_MASTER_A_GPIOW_1_REG (PERIPHS_PIN_MUX_5) | |
| #define MESON_I2C_MASTER_A_GPIOW_1_BIT (1<<23) | |
| /*i2c master b*/ | |
| #define MESON_I2C_MASTER_B_GPIOH_3_REG (PERIPHS_PIN_MUX_7) | |
| #define MESON_I2C_MASTER_B_GPIOH_3_BIT (1<<6) | |
| #define MESON_I2C_MASTER_B_GPIOH_4_REG (PERIPHS_PIN_MUX_7) | |
| #define MESON_I2C_MASTER_B_GPIOH_4_BIT (1<<7) | |
| #define MESON_I2C_MASTER_B_GPIOY_12_REG (PERIPHS_PIN_MUX_10) | |
| #define MESON_I2C_MASTER_B_GPIOY_12_BIT (1<<14) | |
| #define MESON_I2C_MASTER_B_GPIOY_13_REG (PERIPHS_PIN_MUX_10) | |
| #define MESON_I2C_MASTER_B_GPIOY_13_BIT (1<<15) | |
| /*i2c master c*/ | |
| #define MESON_I2C_MASTER_C_GPIOY_7_REG (PERIPHS_PIN_MUX_4) | |
| #define MESON_I2C_MASTER_C_GPIOY_7_BIT (1<<28) | |
| #define MESON_I2C_MASTER_C_GPIOY_8_REG (PERIPHS_PIN_MUX_4) | |
| #define MESON_I2C_MASTER_C_GPIOY_8_BIT (1<<29) | |
| #define MESON_I2C_MASTER_C_GPIOX_0_REG (PERIPHS_PIN_MUX_1) | |
| #define MESON_I2C_MASTER_C_GPIOX_0_BIT (1<<22) | |
| #define MESON_I2C_MASTER_C_GPIOX_1_REG (PERIPHS_PIN_MUX_1) | |
| #define MESON_I2C_MASTER_C_GPIOX_1_BIT (1<<23) | |
| /*i2c master d*/ | |
| #define MESON_I2C_MASTER_D_GPIOY_10_REG (PERIPHS_PIN_MUX_10) | |
| #define MESON_I2C_MASTER_D_GPIOY_10_BIT (1<<10) | |
| #define MESON_I2C_MASTER_D_GPIOY_11_REG (PERIPHS_PIN_MUX_10) | |
| #define MESON_I2C_MASTER_D_GPIOY_11_BIT (1<<11) | |
| #define MESON_I2C_MASTER_D_GPIOH_5_REG (PERIPHS_PIN_MUX_7) | |
| #define MESON_I2C_MASTER_D_GPIOH_5_BIT (1<<23) | |
| #define MESON_I2C_MASTER_D_GPIOH_6_REG (PERIPHS_PIN_MUX_7) | |
| #define MESON_I2C_MASTER_D_GPIOH_6_BIT (1<<24) | |
| /*i2c master AO*/ | |
| #define MESON_I2C_MASTER_AO_GPIOAO_4_REG (P_AO_RTI_PIN_MUX_REG) | |
| #define MESON_I2C_MASTER_AO_GPIOAO_4_BIT (1<<8) | |
| #define MESON_I2C_MASTER_AO_GPIOAO_5_REG (P_AO_RTI_PIN_MUX_REG) | |
| #define MESON_I2C_MASTER_AO_GPIOAO_5_BIT (1<<9) | |
| /*i2c slave*/ | |
| #define MESON_I2C_SLAVE_JTAG_TMS_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_1) | |
| #define MESON_I2C_SLAVE_JTAG_TMS_BIT (1<<13) | |
| #define MESON_I2C_SLAVE_JTAG_TDI_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_1) | |
| #define MESON_I2C_SLAVE_JTAG_TDI_BIT (1<<13) | |
| #define MESON_I2C_SLAVE_GPIOB_2_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_2) | |
| #define MESON_I2C_SLAVE_GPIOB_2_BIT (1<<14) | |
| #define MESON_I2C_SLAVE_GPIOB_3_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_2) | |
| #define MESON_I2C_SLAVE_GPIOB_3_BIT (1<<10) | |
| #define MESON_I2C_SLAVE_GPIOC_21_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_7) | |
| #define MESON_I2C_SLAVE_GPIOC_21_BIT (1<<10) | |
| #define MESON_I2C_SLAVE_GPIOC_22_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_7) | |
| #define MESON_I2C_SLAVE_GPIOC_22_BIT (1<<7) | |
| #define MESON_I2C_SLAVE_JTAG_TCK_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_1) | |
| #define MESON_I2C_SLAVE_JTAG_TCK_BIT (1<<17) | |
| #define MESON_I2C_SLAVE_JTAG_TDO_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_1) | |
| #define MESON_I2C_SLAVE_JTAG_TDO_BIT (1<<21) | |
| #define MESON_I2C_SLAVE_GPIOB_0_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_2) | |
| #define MESON_I2C_SLAVE_GPIOB_0_BIT (1<<6) | |
| #define MESON_I2C_SLAVE_GPIOB_1_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_2) | |
| #define MESON_I2C_SLAVE_GPIOB_1_BIT (1<<3) | |
| #define MESON_I2C_SLAVE_GPIOC_13_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_3) | |
| #define MESON_I2C_SLAVE_GPIOC_13_BIT (1<<29) | |
| #define MESON_I2C_SLAVE_GPIOC_14_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_3) | |
| #define MESON_I2C_SLAVE_GPIOC_14_BIT (1<<26) | |
| #define MESON_I2C_SLAVE_GPIOC_16_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_5) | |
| #define MESON_I2C_SLAVE_GPIOC_16_BIT (1<<28) | |
| #define MESON_I2C_SLAVE_GPIOC_17_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_5) | |
| #define MESON_I2C_SLAVE_GPIOC_17_BIT (1<<26) | |
| #define AML_I2C_SPPED_50K 50000 | |
| #define AML_I2C_SPPED_100K 100000 | |
| #define AML_I2C_SPPED_200K 200000 | |
| #define AML_I2C_SPPED_300K 300000 | |
| #define AML_I2C_SPPED_400K 400000 | |
| struct aml_pinmux_reg_bit { | |
| unsigned long scl_reg; | |
| unsigned long sda_reg; | |
| unsigned int scl_bit; | |
| unsigned int sda_bit; | |
| }; | |
| struct aml_i2c_platform{ | |
| unsigned int slave_addr;/*7bit addr*/ | |
| unsigned int wait_count;/*i2c wait ack timeout = | |
| wait_count * wait_ack_interval */ | |
| unsigned int wait_ack_interval; | |
| unsigned int wait_read_interval; | |
| unsigned int wait_xfer_interval; | |
| unsigned int master_no; | |
| unsigned int use_pio;/*0: hardware i2c, 1: manual pio i2c*/ | |
| unsigned int master_i2c_speed; | |
| /* only need 1 i2c master to comunicate with several devices, | |
| * should I prepare 2 master interface to use simultaneously?*/ | |
| struct resource * resource; | |
| struct aml_pinmux_reg_bit master_ao_pinmux; | |
| struct aml_pinmux_reg_bit master_a_pinmux; | |
| struct aml_pinmux_reg_bit master_b_pinmux; | |
| struct aml_pinmux_reg_bit master_c_pinmux; | |
| struct aml_pinmux_reg_bit master_d_pinmux; | |
| struct aml_pinmux_reg_bit slave_reg_bit; | |
| }; | |
| /**************i2c software gpio***************/ | |
| #define MESON_I2C_PREG_GPIOC_OE CBUS_REG_ADDR(PREG_FGPIO_EN_N) | |
| #define MESON_I2C_PREG_GPIOC_OUTLVL CBUS_REG_ADDR(PREG_FGPIO_O) | |
| #define MESON_I2C_PREG_GPIOC_INLVL CBUS_REG_ADDR(PREG_FGPIO_I) | |
| #define MESON_I2C_PREG_GPIOE_OE CBUS_REG_ADDR(PREG_HGPIO_EN_N) | |
| #define MESON_I2C_PREG_GPIOE_OUTLVL CBUS_REG_ADDR(PREG_HGPIO_O) | |
| #define MESON_I2C_PREG_GPIOE_INLVL CBUS_REG_ADDR(PREG_HGPIO_I) | |
| #define MESON_I2C_PREG_GPIOA_OE CBUS_REG_ADDR(PREG_EGPIO_EN_N) | |
| #define MESON_I2C_PREG_GPIOA_OUTLVL CBUS_REG_ADDR(PREG_EGPIO_O) | |
| #define MESON_I2C_PREG_GPIOA_INLVL CBUS_REG_ADDR(PREG_EGPIO_I) | |
| struct aml_sw_i2c_pins | |
| { | |
| unsigned int scl_reg_out; | |
| unsigned int scl_reg_in; | |
| unsigned int scl_bit; | |
| unsigned int scl_oe; | |
| unsigned int sda_reg_out; | |
| unsigned int sda_reg_in; | |
| unsigned int sda_bit; | |
| unsigned int sda_oe; | |
| }; | |
| struct aml_sw_i2c_platform { | |
| struct aml_sw_i2c_pins sw_pins; | |
| /* local settings */ | |
| int udelay; /* half clock cycle time in us, | |
| minimum 2 us for fast-mode I2C, | |
| minimum 5 us for standard-mode I2C and SMBus, | |
| maximum 50 us for SMBus */ | |
| int timeout; /* in jiffies */ | |
| }; | |
| #endif //__AML_MACH_I2C__ | |