/*
 * Freescale i.MXS Register Accessors
 *
 * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
 * on behalf of DENX Software Engineering GmbH
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __MXS_REGS_COMMON_H__
#define __MXS_REGS_COMMON_H__

/*
 * The i.MXS has interesting feature when it comes to register access. There
 * are four kinds of access to one particular register. Those are:
 *
 * 1) Common read/write access. To use this mode, just write to the address of
 *    the register.
 * 2) Set bits only access. To set bits, write which bits you want to set to the
 *    address of the register + 0x4.
 * 3) Clear bits only access. To clear bits, write which bits you want to clear
 *    to the address of the register + 0x8.
 * 4) Toggle bits only access. To toggle bits, write which bits you want to
 *    toggle to the address of the register + 0xc.
 *
 * IMPORTANT NOTE: Not all registers support accesses 2-4! Also, not all bits
 * can be set/cleared by pure write as in access type 1, some need to be
 * explicitly set/cleared by using access type 2-3.
 *
 * The following macros and structures allow the user to either access the
 * register in all aforementioned modes (by accessing reg_name, reg_name_set,
 * reg_name_clr, reg_name_tog) or pass the register structure further into
 * various functions with correct type information (by accessing reg_name_reg).
 *
 */

#define	__mxs_reg_8(name)		\
	uint8_t	name[4];		\
	uint8_t	name##_set[4];		\
	uint8_t	name##_clr[4];		\
	uint8_t	name##_tog[4];		\

#define	__mxs_reg_32(name)		\
	uint32_t name;			\
	uint32_t name##_set;		\
	uint32_t name##_clr;		\
	uint32_t name##_tog;

struct mxs_register_8 {
	__mxs_reg_8(reg)
};

struct mxs_register_32 {
	__mxs_reg_32(reg)
};

#define	mxs_reg_8(name)				\
	union {						\
		struct { __mxs_reg_8(name) };		\
		struct mxs_register_8 name##_reg;	\
	};

#define	mxs_reg_32(name)				\
	union {						\
		struct { __mxs_reg_32(name) };		\
		struct mxs_register_32 name##_reg;	\
	};

#endif	/* __MXS_REGS_COMMON_H__ */