| /* |
| * PPC-AG BG0900 Boot setup |
| * |
| * Copyright (C) 2013 Marek Vasut <marex@denx.de> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <config.h> |
| #include <asm/io.h> |
| #include <asm/arch/iomux-mx28.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/sys_proto.h> |
| |
| #define MUX_CONFIG_GPMI (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) |
| #define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP) |
| #define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL) |
| #define MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP) |
| |
| const iomux_cfg_t iomux_setup[] = { |
| /* DUART */ |
| MX28_PAD_PWM0__DUART_RX, |
| MX28_PAD_PWM1__DUART_TX, |
| |
| /* GPMI NAND */ |
| MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI, |
| MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI, |
| MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI, |
| MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI, |
| MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI, |
| MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI, |
| MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI, |
| MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI, |
| MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI, |
| MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI, |
| MX28_PAD_GPMI_RDN__GPMI_RDN | |
| (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP), |
| MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI, |
| MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI, |
| MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI, |
| MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI, |
| |
| /* FEC0 */ |
| MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET, |
| MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET, |
| |
| /* FEC0 Reset */ |
| MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | |
| (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), |
| |
| /* EMI */ |
| MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI, |
| |
| MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI, |
| |
| /* SPI2 (for SPI flash) */ |
| MX28_PAD_SSP2_SCK__SSP2_SCK | MUX_CONFIG_SSP2, |
| MX28_PAD_SSP2_MOSI__SSP2_CMD | MUX_CONFIG_SSP2, |
| MX28_PAD_SSP2_MISO__SSP2_D0 | MUX_CONFIG_SSP2, |
| MX28_PAD_SSP2_SS0__SSP2_D3 | |
| (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP), |
| }; |
| |
| void mxs_adjust_memory_params(uint32_t *dram_vals) |
| { |
| /* |
| * DDR Controller Registers |
| * Manufacturer: Winbond |
| * Device Part Number: W972GG6JB-25I |
| * Clock Freq.: 200MHz |
| * Density: 2Gb |
| * Chip Selects: 1 |
| * Number of Banks: 8 |
| * Row address: 14 |
| * Column address: 10 |
| */ |
| |
| dram_vals[0x74 / 4] = 0x0102010A; |
| dram_vals[0x98 / 4] = 0x04005003; |
| dram_vals[0x9c / 4] = 0x090000c8; |
| |
| dram_vals[0xa8 / 4] = 0x0036b009; |
| dram_vals[0xac / 4] = 0x03270612; |
| |
| dram_vals[0xb0 / 4] = 0x02020202; |
| dram_vals[0xb4 / 4] = 0x00c80029; |
| |
| dram_vals[0xc0 / 4] = 0x00011900; |
| |
| dram_vals[0x12c / 4] = 0x07400300; |
| dram_vals[0x130 / 4] = 0x07400300; |
| dram_vals[0x2c4 / 4] = 0x02030303; |
| } |
| |
| void board_init_ll(const uint32_t arg, const uint32_t *resptr) |
| { |
| mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup)); |
| } |
