| /* | |
| * Copyright (C) 2011 Renesas Electronics Europe Ltd. | |
| * Copyright (C) 2008 Renesas Solutions Corp. | |
| * Copyright (C) 2008 Nobuhiro Iwamatsu | |
| * | |
| * Based on u-boot/board/rsk7264/rsk7203.c | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #include <common.h> | |
| #include <net.h> | |
| #include <netdev.h> | |
| #include <asm/io.h> | |
| #include <asm/processor.h> | |
| DECLARE_GLOBAL_DATA_PTR; | |
| int checkboard(void) | |
| { | |
| puts("BOARD: Renesas Technology RSK7264\n"); | |
| return 0; | |
| } | |
| int board_init(void) | |
| { | |
| return 0; | |
| } | |
| int dram_init(void) | |
| { | |
| gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; | |
| gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE; | |
| printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024)); | |
| return 0; | |
| } | |
| void led_set_state(unsigned short value) | |
| { | |
| } | |
| /* | |
| * The RSK board has the SMSC89218 wired up 'incorrectly'. | |
| * Byte-swapping is necessary, and so poor performance is inevitable. | |
| * This problem cannot evade by the swap function of CHIP, this can | |
| * evade by software Byte-swapping. | |
| * And this has problem by FIFO access only. pkt_data_pull/pkt_data_push | |
| * functions necessary to solve this problem. | |
| */ | |
| u32 pkt_data_pull(struct eth_device *dev, u32 addr) | |
| { | |
| volatile u16 *addr_16 = (u16 *)(dev->iobase + addr); | |
| return (u32)((swab16(*addr_16) << 16) & 0xFFFF0000)\ | |
| | swab16(*(addr_16 + 1)); | |
| } | |
| void pkt_data_push(struct eth_device *dev, u32 addr, u32 val) | |
| { | |
| addr += dev->iobase; | |
| *(volatile u16 *)(addr + 2) = swab16((u16)val); | |
| *(volatile u16 *)(addr) = swab16((u16)(val >> 16)); | |
| } | |
| int board_eth_init(bd_t *bis) | |
| { | |
| int rc = 0; | |
| #ifdef CONFIG_SMC911X | |
| rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); | |
| #endif | |
| return rc; | |
| } |